|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: For parts or not working Location: North Las Vegas, United States You are buying a Antique Wood & Copper Hit and Miss Gas Engine Low Tension Coil. Very old and in used condition with considerable wear. Makes a great ... moreconversation piece. Has not been tested. Includes what is pictured.
Buy It Now
$55.24 Shipping Condition: Used Location: Lusby, United States We’re told this was for a pony motor that was on a old hay baler and was bolted on to replace a lost crank handle.
Buy It Now
$7.05 Shipping Condition: Used Location: Watervliet, United States Offered here is a Vintage"Briggs& Stratton Operating and Maintenance Instructions. Models 92500-92598& 92900-92998, approximately 11" ... moreX 8 1/2" 4 pages. This has soiling with oxidation etc. This was found in the attic of an old farm house- there is a musty smell. Please see our other listings for more great stuff from the same property. Shipped in plastic. Between stiff cardboard and with delivery confirmation. Please go to my m e button for additional information on collectibles we are offering! PLEASE leave positive feedback- I always do. All payments are due In Our Hands within 7 days of purchase- NO exceptions unless we have approved it in advance! Please note Buyers from outside of the United States are responsible for any and all duties. Tariffs or other fees that YOUR country may impose. Please be sure to check our store. Myers Collectibles, where we have thousands of items listed. Each week we list Over 100 Antique& Collectibles for sale! A lways some superb items. Low opening bid and no reserve! You might want to keep us as a"favorite seller" and check back often on our offerings- you'll always find something special. We do discount shipping costs for multiple purchases. Shipping Procedures I pride myself on quick shipping. I usually ship on Mondays. Wednesdays and on Fridays except on holidays. Once a package is in the Postal Service hands, I loose control over it. Generally for US shipments you can expect delivery within 3 or 4 business days(or 3-9 for media rate) For non-US shipments, once the package leaves the US, even the USPS looses control over it. I can not predict transit times for these packages. They quite often are held up in customs in the receiving country. Please be patient. Sign up for PayPal; the fast. Easy, and secure way to pay online. I never use second chance offers as there are too many fraudulent people out there trying to copy successful sales. If you get an email with a second chance offer it is not from me and is therefore not genuine so
Buy It Now
$50.49 Shipping Condition: Used Location: Lusby, United States 5/8” square ID.
Buy It Now
$4.77 Shipping Condition: New Location: Le Mars, United States Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach. Part:Pair 2" narrow oiler gasket. Condition: New. Description: This listing is for 2! Made in the USA right in our shop these are high quality oiler gaskets. Die cut for a perfect fit. Won't dry out or soak up fluids over time. They measure 2 on the outside and 1 9/16 on the inside. Made from hi quality Felpro cork they will last for many years to come. Quantity and volume discounts available for wholesale orders. Call for more info. Check my feedback to see what others are saying about"our" new gaskets. Questions? Call 712-490-5596. Thanks. Zach Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$18.40 Shipping Condition: Used Location: Orient, United States I have been collecting hit miss engines for 35+ years and I am very knowledgeable. I apologize for any inconvenience. Condition:One nut is missing. Due ... moreto age this item is being sold "AS IS". All the images are original scans of the actual item being sold.
Buy It Now
Free Shipping Condition: New Location: Le Mars, United States Would look great on your restoration project!
Buy It Now
$15.00 Shipping Condition: For parts or not working Location: Oldtown, United States Antique Madison Kipp M-K. L. Oiler Ratchet Lubricator. The lid is broken on the hinge side. It’s extremely dirty and greasy. What you see in the photos ... moreis exactly what you will receive. Please review the photos carefully. Shipping service will be FedEx/UPS ground or USPS.
Buy It Now
$21.30 Shipping Condition: Used Location: Oak Harbor, United States THIS ANTIQUE BRASS "DETROIT LUBRICATOR CO." ORIGINAL HYDROSTATIC 1/2 PINT #1536835 LUBRICATOR IS IN VERY GOOD CLEAN AS FOUND CONDITION - WEIGHTS 6LBS ... more2OZ - SEE PHOTOS FOR DESCRIPTION - EMAIL WITH ANY QUESTIONS - POSTAGE IS $21.30
Buy It Now
$14.00 Shipping Condition: Used Location: Ceresco, United States Here is an original fuel pump for Fairbanks Morse Horizontal H antique, stationary, gas engine. Seems to be in good shape and plunger is loose but will ... moreneed rebuilt. Please Check out the pictures and see if you need it. Sold as isFor a FM H gas engineOriginal PartMounting holes are 2" apart on centerPart No. 17RP
$5.75 Shipping Condition: Used Location: Oak Harbor, United States THIS ANTIQUE 1922 BRASS " ARCADIA CO. " LONG BEACH CAL. LUBRICATOR OILER FOR HIT MISS ENGINE IS IN GOOD CONDITION - SEE PHOTOS FOR DESCRIPTION - SEE PHOTOS ... moreFOR DESCRIPTION - EMAIL WITH ANY QUESTIONS - POSTAGE IS $5.75
Buy It Now
$16.00 Shipping Condition: Used Location: Superior, United States Selling the parts lot off my Briggs model WMB, any questions just ask
Buy It Now
$21.90 Shipping Condition: Used Location: Shawnee on Delaware, United States Neither has its glass. A real grab bag for the right person.
Buy It Now
Free Shipping Condition: Used Location: Laurel, United States Original Governor. EXCELLENT CONDITION! -------------------------------------------- --------------------------------------- HISTORY ---------This firm ... moremanufactured speed governors for sawmill steam engines.
Buy It Now
$17.00 Shipping Condition: Used Location: Superior, United States Selling the magneto with a HOT coil off my Briggs Model U, in good shape but does have the throttle control broken off, not sure if that was an original ... morepiece or not, any questions just ask
Buy It Now
$55.64 Shipping Condition: Used Location: Holgate, United States Here is a Head that fits 2-1/2hp to 3-1/2hp Hercules. Economy, or Jeager engine. These often have freeze cracks and have been repaired. There are no cracks, ... morebreaks, or welds that I can see or know of on this one. The valve seats mad need to be touched up a little bit. There are pipe nipple remains stuck in the carb and exhaust holes but they should be easy to remove. Check out the pictures and see if you need it. Mounts with 5 holes each about 3-1/8" apart from each other The raised area in the center is about 4" in diameter The outside diameter of the head is about 6-7/8" Nice. And hard to find. NO Cracks. Breaks, or Welds that I can see or know of. If you pick this part up at my house 7.25% sales tax will be added to the purchase price. If it is shipped or delivered out of state then there will be no sales tax. If you have the proper exemptions then also there would be no sales tax. My handling time is set at 5 business days after recieving payment. Most items will go out faster though. If you have any questions give me a call 419-789-1159 The Fine Print. I am happy to be selling another winter season on ebay. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. Please feel free to ask any and all questions. I will even answer questions that are already answered in the description although your intelligence may be questioned: I am 100% certain that no one needs any of the items I sell to meet any basic needs of life. With that said I am selling these items for the money and if you cannot pay, think you might not be able to pay, or do not want to pay please bid on items owned by someone else. Some basic excuses for not paying are; someone getting pregnant, someone dying, losing a job, wife losing a job, getting a divorce, termites, fires, alcoholism, drug addiction, using the money for another purchase, and just b
Buy It Now
Condition: New Location: Anacortes, United States For Sale Steam Engine Alternator Oiler Whistle Gauge Off Grid Steam Engine boiler. Up for sale is my fully machined and assembled Antique reproduction ... moresteam engine from castings including cross slide, flywheel, eccentric, piston and rings, and all moving parts for the engine.
Buy It Now
$12.00 Shipping Condition: Used Location: Lockridge, United States Good glass. Good 3/8” threads. Has vent tube and check ball. Oiler will need new gaskets for best results. Oiler seems to drip oil like it’s intended ... moreto. Will need adjustment depending on the engine. When the top fill plug screw is tightened down, the brass lever still slides back abs fourth. Not a big deal but I believe there’s some sort of a “button” worn out or possibly even missing on the bottom of the screw. See pictures for the absolute best description. Oil will be drained prior to shipment.
Buy It Now
$10.00 Shipping Condition: Used Location: Marine City, United States These are real nice brass oilers for steam, or hit miss or gasoline engines and I think it’s possible that Lunkenheimer may have made them. Please look ... moreat pictures.
Buy It Now
$49.29 Shipping Condition: Used Location: Holgate, United States Here is an original FUEL TANK for IHC LB 3hp to 5hp engine. It seems to be in very nice shape. I didn't check it for leaks but it all looks really good. ... moreIt's "AS IS", if it leaks you can fix it, but it should be just fine.
$5.95 Shipping Condition: Used Location: Burlington, United States Briggs and Stratton FH FI kick start spring.
Buy It Now
$11.60 Shipping Condition: Used Location: Sleepy Eye, United States Vintage Antique Brass Glass Drip Oiler Hit Miss Engine Original Glass Steampunk Please view all pics for condition. Shows wear from being used and from ... morestorage. Surfaces have some scuffs, and scratches. Both of the glass cylinders are intact. I do not see any chips, cracks, or breaks. No manufacturer's name that I can see. A nice brass hit n' miss engine drip oiler. Overall displays well! I have many more items listed, and I am able to combine shipping on most items.Measures: 4 1/2” Tall x 1 3/4” Diameter If you have any questions feel free to ask.
Buy It Now
$19.00 Shipping Condition: Used Location: Orland, United States The Oilers are NOT COMPLETE! USED CONDITION: For Parts Only! See Pictures for Condition & Pieces Missing. Displayed on New Wood Bases. can be removed ... moreif desired. The Lot includes Condition: Used condition with wear consistent with age & use.
Buy It Now
$18.66 Shipping Condition: Used Location: Syracuse, United States There is a patent date of 1914 on the box. The piece you are purchasing may or may not work. But, if we stated above that the item works then we stand ... morebehind this. It may be missing parts or components.
Buy It Now
$16.95 Shipping Condition: For parts or not working Location: Lockridge, United States FH Briggs & Stratton fuel tank. Cast Iron. No breaks or welds. Inside will need cleaned out before installation. Some of the threads may need cleaned ... moreup for best results. See pictures for the absolute best description.
Buy It Now
Free Shipping Condition: New Location: Le Mars, United States Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach. Part: Champion W20 520 7/8 Spark Plug. Condition: New. Description: This is a brand new Champion W20 520 spark plug with 7/8 thread. Applications include a lot of our favorite old hit& miss flywheel gas engines. This is a very nice high quality spark plug at a very reasonable price. Buy several and save with combined shipping. Questions? Call 712-490-5596 Thanks. Zach Check out my! Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want to do. I don't offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$16.25 Shipping Condition: Used Location: Holgate, United States Here is a very nice small gear pump that can be used for a variety of old gas engines and other purposes. It would look really good mounting on a small ... moretank cooled engine for moving cooling water. There are no cracks, breaks, or welds.
Buy It Now
$13.60 Shipping Condition: Used Location: Shawnee on Delaware, United States YOU ARE LOOKING AT A VERY NICE ANTIQUE BRASS AND GLASS HIT MISS DRIP GAS OR STEAM ENGINE OILER. MEASURES 6 1\2' LONG FROM TIP TIP. 1\4' THREAD ... moreOUTLET. 1\2 PINT. ANY QUESTIONS PLEASE EMAIL, SHIPPING IS ESTIMATE, THANKS FOR LOOKING! AS IN ALL LISTINGS WE CAN CHECK UPS AND USPS FOR BEST SHIPPING FIT. SEND ZIP.
Buy It Now
$7.00 Shipping Condition: Used Location: Superior, United States Selling a Eisemann cam and key off my maytag engine, everything in good shape, any questions just ask
Buy It Now
Free Shipping Condition: New Location: Le Mars, United States Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach. Part: Waterloo Boy Gas engine decal. Condition: NEW. Description: A Brand new decal for the Waterloo Boy engine. This decal measures 1.5 x 8.25" Would look great on your restoration project! Looking for one a little cheaper? Make us an offer! We have some'not as nice looking' pistons to get rid of as well and will sell them at discounted rates! They still run just fine if you use new rings on them! Questions? Call 712-490-5596. Thanks. Zach Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1449152d7fb-0xf5-
Buy It Now
$15.50 Shipping Condition: For parts or not working Location: Lockridge, United States Cylinder head specifically removed from a 1 1/2HP Fairbanks Morse Z dishpan spark plug model Hit & Miss engine. Head does have one old nice looking braze ... moreREPAIR! Whoever repaired it looks to have done a very nice job! See pictures!! Valves are loose, may not hurt to give them a quick lap job before Installing the head. The springs seem to be good! The 4 holes that hole the head to your block are spaced 3 7/16” apart from each other on centers. The 2 carburetor mount holes are 2 1/4” apart on centers. The drain hole may need cleaned up and re tapped before installing a plug for best results. This item is old, used, and sold as is. See pictures for the absolute best description.
Buy It Now
$193.65 Shipping Condition: Used Location: Holgate, United States This will fit a 2-1/2hp to 12hp engine but it is probably most correct for a 5hp to 9hp. This is the size that was used on the saw rigs. There are no ... morecracks, breaks, or welds I can see or know of. Check out the pictures and see if you need it.
Buy It Now
$65.00 Shipping Condition: For parts or not working Location: Lockridge, United States 2HP Throttle Governed Sattley cylinder & Hopper. No breaks, cracks, or repairs. Please see pictures for the measurements! Cylinder bore is 3 3/4” Nice ... morebrass tag! The cylinder does have a wrist pin “groove” that is just deep enough to catch your finger nail with. I really don’t think it would affect engine performance all that much or less you plan to work the engine around the clock daily. Please see pictures though and take in to consideration this part is 100 years old. Thanks for looking. Antique Sattley Montgomery Ward 2HP Cylinder & Hopper Throttle Gov Hit Miss.
Buy It Now
Free Shipping Condition: For parts or not working Location: Shenandoah, United States Antique International Harvester 10-20 Brass Carburetor. Sold for Parts or Rebuild or core. The center section swivels making the tube loose.
Buy It Now
$15.45 Shipping Condition: Used Location: Orient, United States Buckeye Brass Rod Oiler NO. 0. Oiler is in good condition and ready to use. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. ... moreI apologize for any inconvenience. Condition:Due to age this item is being sold "AS IS".
Buy It Now
$18.40 Shipping Condition: Used Location: Holgate, United States Here is a 4" PISTON that is for a Field Brundage or Sattley engine. Its a little rusty but it should clean up just fine. Check out the pictures and see ... moreif you need it. It had a 4" cylinder bore (obviously).
Buy It Now
Free Shipping Condition: Used Location: East Bridgewater, United States
Buy It Now
$16.50 Shipping Condition: For parts or not working Location: Lockridge, United States Cylinder head that I believe fits a 1 1/2-2HP throttle governed spark plug Fairbanks Z engine. I do not see any breaks or welds. Has some pitting. No ... morevalves or springs. The threaded areas look solid but will need some minor cleaning or a quick tap ram through the holes for easier installation. Carburetor mounting holes measure 2 1/4” apart on centers. The 4 holes that hole the head to your engine are spaced 3 1/2” apart from one another on centers. Please research that this is the correct part for your engine. Keep in mind this item is old and used. It will require work and some parts before being able to be put yo work. Please see pictures for the absolute best description. Sold as is.
Buy It Now
$13.00 Shipping Condition: Used Location: Marine City, United States Nice old pump sight glass brass oiler probably from a hit and miss or steam engine
Buy It Now
$5.26 Shipping Condition: Used Location: Belmont, United States ANTIQUE TAYLOR CHROME THERMOMETER . Excellent working condition!!
Buy It Now
Free Shipping Condition: New – Open box Location: Bangor, United States Part Number 12000A. Not sure what model it fits.
Buy It Now
$77.02 Shipping Condition: Used Location: Holgate, United States Here is an original 12" pulley for a 3hp John Lauson hit and miss engine. Of course it could fit lots of different engines! It might also fit other sizes ... moreof engines. Check out the pictures and see if you need it.
Buy It Now
Free Shipping Condition: New Location: Bangor, United States This is a New Reproduction Butterfly and Rivet Set for a Briggs & Stratton Model FH or S engine. 2 Piece Die Cast butterflies and 4 Nickel Plated Brass ... moreRivets are just like originals. Last 2 pictures show new Butterfly set installed in Carburetor, Carb is not included.
Buy It Now
$27.99 Shipping Condition: Used Location: Holgate, United States Here is a reproduction muffler for a 2-1/2hp IHC horizontal and or the 2hp & 3hp IHC vertical gas engines. It is very well built out of steel and cast ... moreiron. Check out the pictures and see if you need it.
Buy It Now
$22.80 Shipping Condition: For parts or not working Location: Bridgeton, United States Bare head. Exhaust threads will need cleaning up and some work. Original HEAD 1 3/4 HP ASSOCIATED CHORE BOY / United Hit Miss Gas Engine Antique.
Buy It Now
$18.40 Shipping Condition: Used Location: Holgate, United States It appears to be in pretty nice shape. Check out the pictures and see if you need it. I think there are several different kinds of Sparta engines and ... morethis may not be correct for all of them. I am a real person who is easy to find.
Buy It Now
$18.40 Shipping Condition: Used Location: Daytona Beach, United States For sale is a stationary or hidden, Miss engine, magneto and igniter. The pictures tell the story what you see is what you will get. If you have any questions, ... moreplease ask before you buy. also check out my other listing for more interesting items. Thank you.
Buy It Now
Free Shipping Condition: New Location: Le Mars, United States Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being ... morespent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach. Part: 92/ 72 Crank Shaft Shim.010 Thickness. Condition: New. Description: Eliminate the end play in your Maytag model 92 or 72 engine's crank shaft by using our crank shaft shims. They are made to the same standards as the original shims and available in the same thicknesses: 005/ 010/ 031 These high quality reproduction shims are available for the first time as a reproduction part. Eliminate the need to scrounge and salvage old rusty and worn out shims. This is a great. Made in the USA part available from zkstuff. Use them to take out your end play and complete your perfect restoration. Buy several, as other thicknesses are available in my store, and use a combination of them to eliminate your end play. Need to know how much end play you have? Simply use feeler gauges and stick in to measure your end play and then buy shims accordingly! Questions? Call 712-490-5596 Thanks. Zach Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want to do. I don't offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every on
Buy It Now
$30.57 Shipping Condition: Used Location: Holgate, United States Here is an original pulley for a 3hp IHC M engine. I am sure it would also fit fine on many other engines. Check out the pictures and see if you need ... moreit. I am a real person who is easy to find. Has opening for gib key head.
Buy It Now
$18.40 Shipping Condition: Used Location: Holgate, United States Check out the pictures and see if you need it. I am a real person who is easy to find. Fits on a 2" shaft and will grip the key or keyway.
Buy It Now
$8.50 Shipping Condition: Used Location: Lockridge, United States Nice original cast iron rocker arm for a 2 1/2HP Waterloo built hit & Miss engine. No repairs or welds. See pictures for the absolute best description.
Buy It Now
$12.50 Shipping Condition: Used Location: Lockridge, United States Nice original plate with a brass tag. No breaks. Original patina. See pictures. No breaks.
Buy It Now
$14.95 Shipping Condition: For parts or not working Location: Lockridge, United States Incomplete!! Parts unit!! What you see is what I have. Good 1/2” threads. Fill plug hole has a “dent” on the threaded area. See pictures for the absolute ... morebest description. Sold as is.
Buy It Now
$11.60 Shipping Condition: Used Location: Sleepy Eye, United States Antique J E Lonergan’s Brass Drip Oiler Hit N’ Miss Tractor Engine SteampunkPlease view all pics for condition. Shows wear from being used and from storage. ... moreSurfaces have some scuffs, and scratches. The glass cylinder is intact, but does have a chip which is pictured. The bottom glass cylinder is missing. Made by the J. E. Lonergan's Brass Company. A nice brass hit n' miss engine drip oiler. Overall displays well! I have many more items listed, and I am able to combine shipping on most items.Measures: 4 3/8” Tall x 2” Diameter If you have any questions feel free to ask.
Buy It Now
$6.75 Shipping Condition: Used Location: Madison, United States This is an antique hit & miss brass grease cup by Essex Brass Co. out of Detroit, Michigan. It measures 1-1/2” in diameter. See photos for condition.
Buy It Now
$14.89 Shipping Condition: For parts or not working Location: Lockridge, United States I believe the engine this rocker arm setup came from was a 6HP Witte engine. Please measure up your engine and compare to these before purchasing. Part ... morenumbers KD243A and KD25A The overall length of each rocker arm is just under 7 1/4” The rocker arms do move freely on the shaft. The rocker arm rollers do not spin, they are stuck!!! Please see pictures for the absolute best description. I don’t see any cracks or repairs. The flip Oilers are broken. This item is old, used, has wear, and is sold as is. Thanks for looking.
Buy It Now
$22.00 Shipping Condition: Used Location: Joliet, United States Antique Kinwood Oiler Made By The Kinsey Mfg. Co. I don't know if this is off of a car or steam engine.
$14.38 Shipping Condition: Used Location: Santa Cruz, United States Used antique compressor head, needs cleaning and inspection, seems to be complete.
Buy It Now
$17.80 Shipping Condition: Used Location: Alamance, United States
Buy It Now
$6.00 Shipping Condition: For parts or not working Location: Belleville, United States Cool vintage or antique piece of equipment. The bulb/cannister has a few cracks and may be missing other parts. I have taken a bunch of photos for the ... moreinterested party to inspect visually. Comes as shown. See pictures for more visual details and to ensure satisfaction. We combine shipping on multi orders and refund excess shipping costs back via refund. Check out my store for more vintage items of all kinds.
|
|
|
|
Monitor BEARING CAPS hit miss stationary antique engine
monitor vj 1-1/4hp bearing caps. bearings look to be in good shape. ready for your engine.
|
|
|
Monitor PUMPJACK RARE hit miss stationary antique engine
good usable monitor 1-1/4HP pumpjack. this is the nice style pumpjack which you can disengauge. not stuck.Not a lot of play.gear seems pretty good. no cracks or repairs noted. even has grease cup. can be shipped usps or Fastenal
|
|
|
Monitor cylinder/hopper RARE hit miss stationary antique engine
good usable monitor 1-1/4HP cylinder as far as I can tell without any damage. shipping will have to be calculated at the end. And will take me time to pack it well. if any questions just ask.
|
|
|
hit miss engine Associated EARLY hired man stationary antique engine
this engine has new rings.New wrist pin/bushing.new valves,springs,rebuilt ignitor. the cart is not included. I have had it putt couple times. rings need to be seated. has medium amount of compression. I went to adjust the exaust today and the rocker arm broke, but has been repaired nicley. does have a nice pulley. crank is straight. straight trip ignitor, does have silver on cylinder,dark red paint here and there. will need a fueltank and muffler to complete. note this does have the flat spot on back of base for tag. But no holes for rivets or anything like that. CAN BE HELD UP TO 4 MONTHS FOR PICKUP. I will possibly be at lathrope.Mo show, exline ia, Hamilton, mo shows and can be delivered. can be shipped through Fastenal but will take me some time to do that.
|
|
|
Antique Stationary Engine GB Essex Brass Co Engine Oiler Part
Full unit measures 3" tall. Good glass and complete thanks
|
|
|
Antique Economy 1-1/2 HP Throttle Governed Stationary Gasoline Engine hit miss
For your consideration. Antique Economy throttle-governed stationary gas engine distributed by Sears(from what I understand) Unknown age- appears to be unrestored has WICO mag- no trucks Had this running last fall- just don't have room to keep them all! If you have questions about something. Feel free to call me- I don't text so don't expect a response from a text. Greg 785-969-5913 Don't miss your chance to add this piece from the days of old to your collection! Please examine pictures with zoom feature- pictures show condition. From an estate sale and selling"as-is" Thank you for looking! A WORD ABOUT SHIPPING: I have this listed this as a"local pick-up" but I am willing and able to build a crate and ship it via Fastenal Third Party Logistics. I have successfully shipped engines to New York and Washington ... morestate and Alaska in the past. Your Fastenal Store will need to have a fork lift. Please keep in mind that it will take me a few days to build the crate for shipping. So it will not be an overnight turn-around time. PAYMENT: $100.00 deposit via PayPal with balance by check. Item will be shipped after your check clears(about a week or so) Please keep in mind that even certified checks take a few days to clear the banks. If you are picking it up. We can accept cash with a non-refundable $100 deposit via PayPal. Pick up needs to be arranged within 2 weeks from end of auction or it will be relisted and deposit forfeited. Good communication is key- so if you have questions, please feel free to ask.
|
|
|
antique hit miss aermotor pump jack rod stationary engine windmill 8 cycle farm
I believe this is an 8 cycle aermotor pump rod for running the walking beam. Not sure so you be the judge. Looks like ZA22 cast in oil cup. Babbitt looks very good. 38 inchs long overall. 1 in hole. Easy fix bend at top and some holes have been egged out see pics. kind of hard to find part. shipping is lower 48 international is more. check my other auctions.
|
|
|
Columbus antique stationary hit and miss engine tag
Up for bid I have an original Columbus Machine Engine tag. Serial number 8232. Nice original heavy cast brass tag. In good condition not bent broke or cracked. Very hard to find item.What appears to be two spots of paint on the back of the tag. So you know what to do. Ask questions Buying as is No returns. Ships in USA only. Thanks
|
|
|
hit miss engine antique stationary engine flywheel engine flyballgovernor model
I THINK THIS IS MODELED AFTER A FAIRBANKS MORSE SCREEN COOLED ENGINE. I HAVEN'T RUN THIS, IT HAS FIRE,I PICKED THIS UP AT AN ESTATE SALE IN SOUTH GEORGIA. I DON'T KNOW WHO THE BUILDER WAS BUT I DO KNOW THEY PUT A LOT OF TIME IN THIS.IT IS A FLYBALL GOVERNED ENGINE TURNS OVER HAS GOOD COMPRESSION. IF YOU HAVE ANY QUESTIONS YOU CAN CALL 606-833-8727.THIS IS FOR LOCAL PICKUP.IF YOU WANT THIS SHIPPED WINNING BIDDER WOULD RESPONSABLE FOR ALL FEES.THANKS FOR LOOKING AND HAVE A GREAT DAY. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-146c75a6f32-0x10d-
|
|
|
3HP fairbanks morse hit miss antique stationary engine
whats left of 3hp Fairbanks morse. cylinder has pitting. base is good. I have three nice flywheels. nice shinny crankshaft. Ready for your engine can be shipped with fastenal
|
|
|
The Gas Engine Magazine 11 Issues 2000 Hit & Miss, Stationary & Antique Engines
The Gas Engine Magazine 11 Issues 2000 Hit& Miss. Stationary& Antique Engines Overall very good read condition*See my other listings for more antique tractor magazines* I will be happy to combine shipping if you purchase multiple magazines or magazine lots from us Sold as is More photos upon request
|
|
|
Antique Maytag Wrench w/scredriver end- hit miss stationary gas engine tool #e10
For your consideration. Antique Maytag wrench for engine- this one has the screwdriver tip intact Don't miss your chance to add this piece from the days of old to your collection! Please examine pictures with zoom feature- pictures show condition. From an estate sale and selling"as-is" Thank you for looking! numbers are for my inventory use only THE FINE PRINT: 1. SHIPPING: I am glad to ship in the same package on multiple purchases when able- please be proactive and use the shopping cart feature to ask for a recalculated shipping rate. I cannot offer refunds on shipping once paid- so ask about it and wait for invoice if you have more than one auction or purchase. Also. Please remember- the feedback question asks how quickly the seller shipped your item- NOT how fast did the shipping company deliver. I use USPS- most often the ... morePriority Mail option unless it is prohibitively expensive. I ship daily Monday through Friday. 2. PAYMENT: Payment via PayPal expected within 3 days of auction end unless arrangements are made ahead of time. If you pay by e-check through PayPal. It takes several business days for that payment to clear and be deposited into my account(just like a paper check) Your item will ship once your e-check payment has cleared into my account. If you don't have a PayPal account- we will consider other forms of payment. 3. RETURNS& REFUNDS: All returns handled on an individual basis. Please contact us prior to returning item so that we can determine best way to proceed. If. By some chance your item arrives broken, I will need you to email me picture of packaging and picture of item before proceeding with return or refund. Thank you. 4. DESCRIPTIONS: Most of my items are obtained through estate sales and farm auctions. I do clean up the items a little for the pictures. But I leave thorough cleaning to the new owner since patina from age and use, once removed, cannot be replaced. I describe items to the best of my ability and try to be very objective in my wording. I take lots of pic
|
|
|
LIVE STEAM STATIONARY ENGINE MODEL SOLID BRASS CORRUGATED BOILER VINTAGE ANTIQUE
LIVE STEAM STATIONARY ENGINE MODEL SOLID BRASS CORRUGATED BOILER VINTAGE ANTIQUE Description: Model live steam stationary engine. Circa 1910 Unusual corrugated copper boiler and four spoked flywheel. The double acting cylinder engine. Flywheel, drive wheel and bearings are all solid brass with red painted and lacquer finishes. The copper boiler fitted with safety pressure valve filler. Steam release valve and control tap, missing turned wooden handle. Not in running order but close to it. The flywheel. Piston and double acting oscillating cylinder assembly run smooth and free with no bad wear to the motion(see dismantled valve assembly) The boiler is airtight. The pipe joint needs soldering and the engine should run. Height to top of chimney 12" or 305mm. Weight 1556 grams. Guaranteed old and original. Please ask any questions you may ... morehave before bidding. For overseas items with a final auction value of £40 or more' International Signed For' Tracked Service must be selected. A shipping discount will always be given on combined purchases. I ship worldwide. Please use the shipping calculator, press the"Postage and Payments" tab, above the scrolling gallery, if your country is not shown please ask.
|
|
|
dandy challenge hit miss engine wooden corn sheller stationary antique
nice sheller. shafts are tight. flywheel fits loosely on the shaft. But just needs a new set screw, top casting missing, but has wooden hopper. does have the handle.wood in good shape for age. great for challenge engine collector. email if questions. can be held up to 3 months after its been paid for. if buyer sets up shipping I can drop it off at my local Fastenal when I get the chance.
|
|
|
Antique Delco Light Plant Stationary Engine Gas Tank Part
Measures 17.5" long. Looks pretty straight and solid may need cleaning sold in the condition as shown, thanks
|
|
|
TWO OLD MAYTAG #3 and #6 WRENCH ANTIQUE HIT MISS STATIONARY GAS ENGINE TOOL.
Two Maytag wrenches. 3 and#6. Really nice lettering still. No breaks.
|
|
|
Vintage Antique IH -Tractor- Hit & Miss- Stationary Engine- Oiler Lubricator
Vintage International Harvester Oil Cup.Not sure if it's for an Antique tractor. Stationary or Hit and Miss Engine. It has the IH emblem and part# cast on the Lid and part# S785 cast on the bottom. The lid screws off of the base. Please no international shipping.
|
|
|
Antique Vermont Stationary Gas Engine Oiler
Glass is cracked otherwise good
|
|
|
Antique REO Motors Stationary Motor/Engine
This is a complete motor(except air filter)Has good compression and great spark!Carb is free and moves ok.Squirt of starting fluid and starts on first pull! Easily restorable to original condition.This is being sold AS-IS with no gaurantees or returns.Shipping To Lower 48 only please.Good Luck! I strive to keep my feedback score high so please contact me for resolution first! Payment is due within 24 hrs of my invoice! Let me know if a problem arises(all I ask) PLEASE LEAVE FEEDBACK! I will do same as you!
|
|
|
Galloway 2 1/4 hp Hit Miss engine Gas Engine Ice Cream Antique stationary motor
YOU ARE BIDDING ON A Galloway hit miss engine 2 1/4 hp gas engine. Brass Tag sn# NO PART LEFT UNTOUCHED. Almost finished only needs very little to be complete. And Running NEED A IGNITOR TRIP. HAS EVERY THING BUT THE TRIP. Need a Muffler and fuel line. Needs carb needs the cup or choke part. There is a no reserve on the auction. Will sale for high bid. Here is a short list of work done. De-Glazed cylinder bore Was s Used electrolysis to clean up any internal parts(gov.Gears,piston,etc) All gears/bearings cleaned. NEW Gaskets NEW Valves Cut New intake and exhaust valve seats NEW valve guides New Decals Has a Very nice gas tank but will need a fuel line. Nice wood skids. On home made wheel barrel type cart. Rebuilt ignitor NEW mica washers and points Original pulley Look at picture they are part of the description. Pick up in Tennessee ZIP ... more37020. Or arrange shipping/delivery. Only selling to pay Bills and start new projects If you have any questions. Please ask. Call or Email Jason Kelly anytime 615 335 9722 I will hold the engine for up to One year. I will at no extra cost to winning bidder. I will put engine on a pallet(strap it down)and drop off at local fastenalfastnalfastenalfastnalfastenal store or shipper for buyer. They are almost(FASTNAL) always the cheapest. You will have to pick up at your local fastnal store. Buyer to arrange the shipping from phone calls To paying cost. I have the Phone number if you need it. Good Luck
|
|
|
Antique Detroit Engine Works Gasoline Hit-Miss Stationary Motor Factory Letter
Antique Detroit Engine Works Gasoline Hit-Miss Stationary Motor Factory Letter For the fan of antique hit& miss engines we offer this interesting letter set from the Detroit Engine Works. Typed on 8.5 x 11 paper. This has the Detroit Engine Works Stationary the cover page. Its dated 1911 and is typed response that details the different types of engines available at the time. Includes the original envelope and application for ordering an engine too. Also includes a newspaper clipping detailing a shop that is powered by Detroit Engines. Neat lot for the Antique Power Buff. Click here to see our other auctions! Another auction from Auction Bay Online. Consignor985/51647/K-A3 Box Click here to see our other auctions! Auction Bay Online Policies: If you require signature confirmation. Please notify us prior to paying for your item. There ... moreis a charge of $3 for signature confirmation. 7% IN sales tax is charged if your item is shipped to an Indiana shipping address. Or picked up from our physical store. We are a professional eBay listing service. We photograph and describe each item to the best of our ability. It is always best to look at all of the high quality photographs that we provide in addition to reading the full description. All items are sold AS-IS. And no returns or exchanges will be accepted. Shipping Costs: To calculate the shipping costs for the USA and all other countries. Please use the shipping calculator. If you win multiple items from auctionbayonline you will save a minimum of $2 per additional item on shipping charges, contact us for an exact quote. We pride ourselves on FAST shipping, most items are shipped within 48 hours of the auction's end. If you have any special requests, just let us know. The boxed shipping weight of this item is approximately 1 pounds. We ship most of our packages via USPS. However, we may substitute Fedex Ground shipping based on location, weight, and package size. If you can not receive a Fedex shipment at your location, please let us know once you win the au
|
|
|
RARE LARGE ANTIQUE BRASS SCHMUTZ PLAQUE STATIONARY ENGINE LOUISVILLE KY USA
RARE LARGE ANTIQUE BRASS SCHMUTZ PLAQUE STATIONARY ENGINE LOUISVILLE KY USA This came off a large stationary engine. It is in great condition and measures 8” x 5" gsrx_vers_525(GS 6.6.5(525)
|
|
|
Antique STOVER Hit-and-Miss 4-Stroke Stationary Gas Engine Motor WICO EK Magneto
| | | Welcome to Wwolst12. The#1 eBay site for Antiques, Collectibles and Art, according to eBay statistics! We are a small family business who works closely with 38 professional art. Antique, and collectible pickers, located in ten states between Maine and Virginia. Every day we list up to 30 unique, rare, and unusual items from ancient antiquities to mid 20th century collectibles. Please, bookmark our auction site! We promise that you will see, and have an opportunity to buy, a wide variety of rare and valuable items; the large majority of which are fresh to the market! Thank You& Happy eBaying from all of us at RIICS Inc. This Antique Hit& Miss Engine is Very Heavy and will need special handling and shipping. PLEASE e-mail us for a packing and shipping quote before bidding on this auction! Also. If you scan down below you will ... morefind details about a possible free delivery if you live along our travel route! The antique. Very early 20 th century. Hit& Miss Engine in this auction was made by the Stover Mfg& Engine Co in Freeport Illinois. Picked fresh from a New Hampshire Farmhouse obout 15 years ago, this antique Stover Hit& Miss Engine is fresh to the market. We do not have the knowledge or equipment to test this Engine, but the wheel turns freely and the motor is not frozen or cracked. We guarantee that it is in all original, complete and un-restored condition. We have posted many photographs of all of the markings and numbers that we found on this early 20 th century piece of equipment. It has a WIKI“EK” Magneto and as you can see. It has an acquired an old rust surface over the years. To make sure some eBayer has a chance to restore this antique Stove Hit& Miss Stationary Engine. It has been listed without any reserve! Don’t forget to email us for a shipping& packing quote, or to inquire about a possible free delivery! As always. We give a 100% Unconditional Money Back Guarantee that the high bidder will be more than satisfied with the quality, age, condition and authenticity of th
|
|
|
Fairbanks Morse stationary diesel marine antique engine manual 1943
I have up for sale this great Fairbanks Morse stationary diesel marine engine manual. This is an original manual printed in 1943. This covers the 33D10-1/2 and 37D10-1/2 models. This is in good condition. With some wear to the edges, loose pages, cover wear, and no markings. This includes the blueprint for the engine and a model 31A brochure. A super source of information!
|
|
|
ANTIQUE G-544 IGNITION SPARK BUZZ COIL FOR HIT-MISS STATIONARY ENGINE ~ WOODEN
Antique G-544 Wooden Coil ~ Hit& Miss Engine* Offered is an antique wooden coil box. The brass terminals have dirt. The top terminals are marked"B" and"P" and the side terminal is marked PLUG. The model number G-544 mark is on the upper side of the box. Measures 4 7/8" by 3" by 2 3/8" Very solid. With no cracks or breaks. Nice old Auto or Hit& Miss Engine coil for your restoration. Bid with confidence! Please contac t me if you have any questions. Check out my other Ford Coil auction! If your an international country please contact me for a shipping cost prior to bidding. BUYER TERMS: Payment is expected 3 days after the auction ends. I make the delivery within 1 to 4 days after payment is received. If not paying by PayPal. Please contact me on the the other method to pay, checks are permitted, but ... moreplease allow 7 days for clearance before the package is sent. We quality pack items. But once it leaves from the post office it is out of our control. If the buyer wants to upgrade the shipping method they must contact me within 24 hours after the auction completes in order for an invoice to be send with the adjusted shipping method. The buyer will assume the costs of this adjusted shipping method. ANY CLAIM FOR ITEMS DAMAGED OR LOST IN SHIPPING OR POST FOR WHICH INSURANCE HAS NOT BEEN PURCHASED WILL NOT BE ENTERTAINED. Insurance is your option. Please email me with any questions prior to bidding. I list a wide variety of items and I try my best to describe items accurately. Accurately includes; general condition and/or working condition of the item. If there is a nuance of condition specific to your collectible please ask prior to bidding. I check my email many times during the week so feel free to contact me with questions.
|
|
|
vtg/antique Stationary Engine Brass Oiler - Big old Powell Signal
Big old oiler; incomplete. Unbroken glass. Same size as a Lunkenheimer no 6. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1478eabc85c-0x112-
|
|
|
vtg/antique Stationary Engine Brass Oiler-Lunkenheimer No. 4-Fig. 1300 Sentinel
Lunk no 4; incomplete. Unbroken glass.
|
|
|
Carling 3hp Live Steam Turbine Engine Hit Miss Stationary Generator Antique
Up for auction is my Carling 3hp Steam Turbine. Works well. I had it running on both air and steam. 1500 rpm, not sure of year but I would guess 1940's. The 3 valves control the flow to the veins, each one closes off a vein. Ran well off of 120 cfm compressor, my small taylor shop boiler did not have enough volume and would just get it spinning. Relatively small for a steam turbine, 2 guys can easily pick it up. Has working governor, 1 inch shaft. Would make a great engine show piece, would look good with a propeller spinning on it. Located 20 miles south of Cleveland, Ohio. Can be picked up or I will ship only if buyer arranges shipping. I like to use Fastenal to ship, they ship store to store for a very reasonable price. If shipped it will be banded to a 4x4 pallet. Please contact me prior to bidding if you plan on having it shipped. ... moreIf you would like more information or pictures please message me or you can call(330)220-6969, ask for Brett On Aug-04-14 at 00:48:13 PDT. Seller added the following information:
|
|
|
Antique Goulds pump stationary engine hit miss centrifugal vtg
Antique Goulds pump stationary engine hit miss centrifugal vtg Great looking pump for running with an old engine. See photos. One of the 4 feet is chipped off and no longer present. See photos. FREE SHIPPING APPLIES TO US BUYERS IN THE LOWER 48 STATES. NOT HAWAII OR ALASKA NOT ON ALL ITEMS ONLY ONES THAT STATE FREE SHIPPING•CHECK OUT MY other items! My business is called Antique Rustler. I have been involved with antques for over 15 year. I use eBay to sell more obscure items to a broader market. I do consign items but mainly just sell my products. I expect payment within 7 business days. If you have the need to pay with a personal check be aware that it will take longer for you to recieve your item as I will have to wait for it to clear. Sometimes the shipping calculator is inacurrate so Please wait for my invoice before you pay. If you ... morehave any questions feel free to message me, I look forward to dealing with you! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 Antique 8" CAST IRON WHEELS Hit & Miss Gas Stationary ENGINE CART 6 Spoke..!!!
This is a matched set of 4 antique CAST IRON WHEELS. 6 spoke. They are approx. 8" diameter, 1" axle size, 1-7/8" axle depth and wheel face is 1-5/8" wide. I did not find any name nor number and I left them as found. You could shine them up or leave them original which is pretty cool. There is one spoke on one wheel with a crack. See pic 6 and one axle hole is a bit out of round see pic 7. These could be used for those old stationary engines. Hit Miss or? Thanks for visiting and please take a peek at my other listings. If you have questions about this item. Or need more information please ask. I will answer to the best of my knowledge. I am not necessarily an expert on everything I sell so welcome information from you at anytime. I will not intentionally misrepresent items. If an item is lacking pieces I will state such. ... moreAdditional photos are no problem. Everything is sold"as is" I make contact within 24 hours of the end of my auctions. In accordance with Ebay rules payment must be received within 2 days. If not received. An unpaid item case will be initiated. I will combine shipping if you are successful on more than one of my items ending within 24 hours of each other. If you buy something that is potentially breakable it's your decision to ask for insurance.
|
|
|
ANTIQUE IGNITION SPARK BUZZ COIL FOR HIT-MISS STATIONARY ENGINE ~ WOODEN ~ SEAL
Antique Wooden Coil ~ Hit& Miss Engine* Has paper Seal still attached- Jefferson Offered is an antique Wooden Dovetail Coil box. The brass terminals have dirt. The top terminals are marked"Bat" and"Gr" and the side terminal is marked PLUG. The tester wires and clamps are still attached. There is a paper seal still attached on the upper side of the box. Looks to read Jefferson. Chicago? ~ Has a face of Jefferson in middle. Very cool. Measures 5 1/4" by 3" by 3 1/4" Very solid. With no cracks or breaks. This was found in many years of dry storage from a collectors estate in Bucks County PA. Untested but should be able to work with a little help. Nice old Auto or Hit& Miss Engine coil for your restoration. Starting at a low price. With no reserve, Bid with confidence! Please contac t me if you have ... moreany questions. If your an international country please contact me for a shipping cost prior to bidding. BUYER TERMS: Payment is expected 3 days after the auction ends. I make the delivery within 1 to 4 days after payment is received. If not paying by PayPal. Please contact me on the the other method to pay, checks are permitted, but please allow 7 days for clearance before the package is sent. We quality pack items. But once it leaves from the post office it is out of our control. If the buyer wants to upgrade the shipping method they must contact me within 24 hours after the auction completes in order for an invoice to be send with the adjusted shipping method. The buyer will assume the costs of this adjusted shipping method. ANY CLAIM FOR ITEMS DAMAGED OR LOST IN SHIPPING OR POST FOR WHICH INSURANCE HAS NOT BEEN PURCHASED WILL NOT BE ENTERTAINED. Insurance is your option. Please email me with any questions prior to bidding. I list a wide variety of items and I try my best to describe items accurately. Accurately includes; general condition and/or working condition of the item. If there is a nuance of condition specific to your collectible please ask prior to bidding. I check my
|
|
|
vtg/antique Stationary Engine Brass Oiler-American Injector Co.
Size is halfway between a Lunkenheimer no 1 and no 2. Unbroken glass.
|
|
|
vtg/antique Stationary Engine Brass Oiler-Lunkenheimer No. 2-Fig. 1300 Sentinel
Lunk no 2. Unbroken glass.
|
|
|
vtg/antique Stationary Engine Brass Oiler-Lunkenheimer No. 3-Fig. 1300 Sentinel
Lunk no 3. Unbroken glass.
|
|
|
Antique Cast Aluminum Gas Fuel Tank Hit Miss Outboard Engine Rat Rod Stationary
Selling this antique Fuel tank. Made from cast Aluminum. 11 inches long and 4.5 inches wide. So many uses for this tank. Use your imagination. Machined. Threaded screw in cap. Has a few scratches. I pictured the worst one. Great stationar engine or maybe even used on a rat Rod. Buying as is! Be sure to ck out my other items for sale! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-147c25eeff3-0x114-
|
|
|
vtg/antique Stationary Engine Brass Oiler-G B Essex Co
2 3/8" diameter. Unbroken glass. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147e1a1980f-0x10d-
|
|
|
Antique Hit Miss Stationary Engine Oiler with 90 Degree Fitting Vintage Steam
Description: This is an original antique Hit'n Miss Engine Oiler. I am not sure of the exact application for the oiler. But it may work with several different styles of engines. I believe the part is solid brass with a silver coating. The part is cosmetically in very good condition as I see nothing broken or missing on it. It may need a good cleaning before being used. Please review all of the pictures for a detailed view of the condition of the item. The item shown is the exact item that you will receive if you are the winning bidder. The item is being sold as is shown in the picture(s) Shipping: International and Domestic shipping can be calculated in the shipping calculator. I will combine shipping on multiple items. I am not liable for any lost or damaged packages that are not insured. In most cases. Items will be shipped within 72 ... morehours of receiving cleared payment. Please allow 7 to 10 business days for delivery. I only ship items twice a week. Payment: Payment must be made within 3 days of auction's end. Please let me know if you have any questions regarding the types of payments that are acceptable. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 vtg/antique Stationary Engine Brass Oilers Lonergan Lunkenheimer NO 1 Delaval
Broken glass in three of them. Delaval has good top glass but missing bottom glass. Lunk no 1's are a Pioneer and a Royal
|
|
|
stationary engine flywheel steam antique vintage old cast iron wheel hit miss
You are buying ONE(1) cast iron flywheel. marked CP 54 diameter = 7 7/8 inch accomodates a 5/8 inch axle 1 1/4 inch wide
|
|
|
3 Antique Vintage Briggs & Stratton Motors Hit Miss Stationary Engine
Up for consideration is a lot of 3 vintage Briggs& Stratton Engines. The red motor is 6B 3HP and turns freely. The yellow is a 60301 3HP ~ has hard pull, and the blue is unmarked but looks like a model 5 2HP and turns freely. Selling all as one and for parts or repair. Shipping will be a flat rate for everyone within the lower 48 states via FedEx 2-5 days. Carefully packaged and shipped within 48 hours of payment cleared. I accept Paypal and payment due within 48 hours of auction ending ~ thank you. I take great pride in selling only good high quality items{ see feedback} If there is a problem upon delivery please contact me asap and I will do my best to make things right. Thanks for looking and please ask any questions ~ kal1382012
|
|
|
Antique Blacksmith Line Shaft for Trip Hammer Run by Stationary Hit Miss Engine
Up for sale is an Antique Blacksmith Line Shaft for Trip Hammer Run by Stationary Hit Miss Engine. It has approximately a 2" shaft with 4 cast iron hangers. The line shaft is approx. 20' long. The big S pulley is 30" in diameter and 4" wide. It has been repaired with a blacksmith repair. The other 4 pulleys are 4.5" wide and 22" wide. It has 4 pillar blocks. All the bearings look to be complete and they turn. Cash or check preferred upon close of auction at pickup. Local pickup only in Parsons. KS. Could be delivered to a couple of locations if you are not needing it right away. Kansas buyers pay 7.4% sales tax additionally on sale; calculated at close of auction. You will receive an invoice with payment information. Bid with confidence by viewing all photos for additional description. Email me with any questions ... moreyou have.
|
|
|
VINTAGE HIT & MISS DETROIT COIL CO BUZZ STATIONARY ENGINE STOVER MAYTAG ANTIQUE
YOU ARE BIDDING ON AN OLD DETROIT COIL COMPANY BUZZ COIL. THIS WAS IN A BOX IN AN OLD BARN. IT HAS NOT BEEN TESTED AND IS BEING SOLD IN AS IS CONDITION. IT NEEDS TO BE CLEANED UP AS CAN BE SEEN THE PICTURES. IF YOU HAVE ANY QUESTIONS PLEASE ASK.
|
|
|
RARE Antique Fairbanks Morse Blow Torch For Stationary Engine Heating Cold Start
Antique Fairbanks Morse Blowtorch. Used for heating up the crankcase on old stationary engines to assist with starting. Comes complete with its original pump removal wrench. Good cosmetic condition. Nice original patina. The alcohol tray below the burner is embossed YF1214A. Pump not working, needs new leather or maybe just some oil? Shipping within Canada to the prairie provinces may be less than quoted so please email with your postal code for an exact cost. If I have over estimated the shipping cost for any destination, I will refund the difference. Local pick-up welcome! Always happy to combine multiple purchases to save on shipping costs where possible. Item will be shipped asap after payment is received, in most cases the same or next business day. The shipping cost quoted in most instances is the most economical, so if you require ... moretracking, insurance or faster shipping, please email for a revised invoice before making payment(or before bidding if possible) Overseas shipping cost is for surface mail so expect 4-6 weeks for delivery if not upgraded to another method. If faster shipping is required, please email for upgrade shipping quote before bidding. Other payment options available.
|
|
|
ANTIQUE HIT MISS STATIONARY STEAM ENGINE STEAMPUNK STEEL BELT WHEEL
Up for auction is an antique small antique engine steel belt wheel. This wheel looks like it came off some type of engine. It would be a nice piece to be used on a steampunk project or use on a small engine. It was recently found in an old New England estate along with many other antique engine parts that I will be auctioning this week. GOOD LUCK BIDDING! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ANTIQUE SMALL ELECTRIC MOTOR ENGINE STATIONARY DYNAMO
Up for auction is an antique small electric motor. This little motor was recently found in an old New England estate along with many other antiques that I will be auctioning. I do not really know what this was used for or what it came off? It looks like it is from the 1930's. It has wear from age as seen and I have no way to test for working order so I am not sure if it works or not. It is missing part of it's cord. Included is the motor pictured. This would be an amazing addition to your old electric motor collection or would even be a nice gift for the antique collector in your life. I WILL NOT SHIP THIS LOT OUTSIDE OF THE U.S.A! GOOD LUCK BIDDING Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1492b6d95e8-0x10c-
|
|
|
Antique IHC Hit Miss Stationary Engine Crank Handle
Antique IHC M titan mogul starter crank handle in nice condition.I'm not sure which engine it was used for but the inside bore is 2 inches.part number 9759.No cracks breaks or welds and the palls are in good condition.See pictures.No sales outside the U.S. shipping 20.00.Thanks for looking.
|
|
|
Antique Stationary Steam Engine Threshing Machine 3" Flat Belting
Roll of belting is pliable has been kept inside and dry thanks
|
|
|
Antique Stationary Steam Engine BRK-2U Large Tractor Main Bearing Cap
Measures 13" long. 9" wide and 3 1/8" deep, bolt holes are 1 3/16" diameter, spacing between bolt holes 8.5" Holes are 1 7/8" from one end and 1 3/8 from the other end. Bronze bearing full width 5 1/8" and 13" in length. no cracks, weighs 60 pounds very heavy
|
|
|
Antique Cast Iron Steampunk Schofield Marine Steam Stationary Engine Cover Part
Cast Iron cover for an early Schofield engine. It measures 8.25" tall and 5" wide at base. No cracks or damage thanks
|
|
|
Webster Hit And Miss Antique Stationary Gas Engine Magneto
Nice loose all original Webster 2 magnet magneto type K. Originally this mag was tagged K8 and came off a Waterloo gas engine but will fit any K Webster bracket. Mag has good bolt holes and is barn fresh. I have not tested it but everything looks good. A nice original single cylinder mag.
|
|
|
Antique Hercules Economy Gas Stationary Engine Ignitor Wrench Old Vintage Tool
Antique Hercules Economy Gas Stationary Engine Ignitor Wrench Old Vintage Tool Up for bids is a vintage ignitor wrench for a Hercules or Economy gas engine. This"L" shaped tool is ribbed. And measures approx 7.75" long. The business ends measure 5/16" square and 11/16" hex. There are no markings, but similar examples can be found on the Wrenching News website for Hercules& Economy tools. Overall condition is very good, with no breaks or repairs. This wrench is ready for use or display, and will be a welcome addition to your farm. Engine shop or collection, offered at a Low start price with no reserve. Please see the pictures for actual item and better description. And email any questions. I am accepting Paypal, and only ship within the U.S. Lucky winner will please add 5.00 for priority shipping costs in the U.S. ... moreI will combine wins to ease shipping costs, but will not end auctions early, so please don't ask. This is unfair to faithful bidders and watchers. Thanks for looking, and Good luck! I will ship up to 60 lbs of hand tools and small items for only 10.00; so grab a few wins. And save! More antique tools and other vintage items will be listed in the coming days. My low start prices do not reflect inferior quality. But make the auctions more fun, as well as allowing collectors to determine the fair value. Thanks for your time, and Have a Great Day.
|
|
|
Antique Farm Steam Stationary Engine Steampunk 2" Flat Belting Lot #5
2" wide x 10' 8" long taken apart(strung out flat)
|
|
|
Antique Farm Steam Stationary Engine Steampunk 2" Flat Belting Lot #4
2" wide x 5' long(spliced) or 10' long taken apart.
|
|
|
Antique Farm Steam Stationary Engine Steampunk 2" Flat Belting Lot #3
2" wide x 28" long(spliced) or 56" long taken apart.
|
|
|
Antique Threshing Machine Stationary Steam Engine 4" Flat Belt Lot 10
4" wide and 6' long(spliced) or 12' long taken apart. Barn kept and has been dry. Shows some edge wear, 2 splices but usable belt thanks
|
|
|
ANTIQUE LAUSON HIT MISS STATIONARY ENGINE TRUCKS CART
This is an old LAUSON engine cart in very good condition. I can find no cracks. Breaks or welds. Just add your own rails and your in business. This cart has the 1 ½“ solid steel axles that are 32“ wide so it should handle a sizable engine. The rear wheels are 17 ½“ dia. X 2 ½“ wide and the fronts are 13 ½“ dia. X 2 ½“ wide. I am not sure if the handle is original or not but it is an original formed steel handle in very good condition and works well. This is a very nice set of engine trucks. Cash@ pickup is welcome or I can palletize and or box and drop off@ our local FASTENAL store for free. You will have to make arrangements. Contact me for further information or questions you may have. ITEM SHIPS TO THE LOWER 48 STATES U.S. ONLY di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-149923e0322-0x112-
|
|
|
Homelite generator antique vtg engine 8a115-1a stationary engine amazing conditi
Homelite generator antique vtg engine 8a115-1a stationary engine amazing condition + manual See photos. Great piece. Was told it runs but haven't seen it run. FREE SHIPPING APPLIES TO US BUYERS IN THE LOWER 48 STATES. NOT HAWAII OR ALASKA NOT ON ALL ITEMS ONLY ONES THAT STATE FREE SHIPPING•CHECK OUT MY other items! My business is called Antique Rustler. I have been involved with antques for over 15 year. I use eBay to sell more obscure items to a broader market. I do consign items but mainly just sell my products. I expect payment within 7 business days. If you have the need to pay with a personal check be aware that it will take longer for you to recieve your item as I will have to wait for it to clear. Sometimes the shipping calculator is inacurrate so Please wait for my invoice before you pay. If you have any questions feel free to ... moremessage me, I look forward to dealing with you! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Antique Farm Axelite No. 15 Steam Stationary Engine Steampunk 4" Flat Belting #1
4" wide and 6 feet long(with splice in) or 12 feet long taken apart. It has a splice-this is a factory made belting material. Has been inside for years so somewhat stiffer but will get more flexible with use. Kept dry thanks
|
|
|
Antique Farm Steam Stationary Engine Steampunk 3.5" Flat Belting Lot #2
3.5" wide and 6.5' long(still spliced) or 13' long taken apart. Good condition and kept dry. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-1499cb40cba-0x10c-
|
|
|
Vintage Pinback Button "I'm a Gas Engine Nut" antique Chase stationary engine
A vintage metal pinback button. I'M A GAS ENGINE NUT" featuring an old Chase engine. The button measures approx. 3-1/2 inches across. The button is in good condition. It looks like there's some moisture discoloration on the yellow background. But no rust. SHIPPING: $2.75 for s/h in the US- Delivery Confirmation"tracking" is included. International shipping will cost more(please ask before bidding) WA State buyers will have to pay 8.7% Sales Tax on the total(price plus shipping) We usually ship 2x a week. Tuesdays and Fridays. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. ... moreWe do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Thanks for stopping by!
|
|
|
Lunkenheimer Hit Miss Engine Oiler Rare Stationary Old Vintage Antique
Here we have a Lunkenhiemer engine oiler. Looks like it has never been used. The threads look good. This is a design that I have never seen before. See pics for condition. Selling as is. Please ask questions if you have them. Please see my others auctions for more great old stuff. Serious bidders only please!
|
|
|
Lonergans Wine Glass Hit Miss Engine Oiler Rare Stationary Old Vintage Antique
Here we have a rare Lonergans engine oiler. The oiler is in very good condition. The threads look good. See pics for condition. Selling as is. Please ask questions if you have them. Please see my others auctions for more great old stuff. Serious bidders only please!
|
|
|
Lister 28D stationary engine, 1.5HP, Antique, Machines/Equipment approx 1945
Reverse Rotation Lister 28D in excellant restored condition was bought in its present fully restored working condition on wooden trolly with metal wheels plus starting handle several years ago. No frost damage has been kept in dry integral house garage. Sheeted over. Engine has been turned over occasionally. Ideal as a show engine. Reason for sale space needed. Serial no. 1/46167 shows manufactured in approx 1949/50 as far as I can establish.
|
|
|
Antique Brass Oiler Hit & Miss Old Stationary Gas Engine Car Tractor Truck Buick
We have more vintage car parts in our Ebay Store. Feel free to check them out. Thank you! Up for bid is an antique brass oiler by Stamped on the top is: No. 2 Application: I'm not sure of the exact application. Please do your own research. Condition: This looks to be in very good condition. It has not been tested. So is sold as is. Please take a look at the pictures provided. If you have any questions please feel free to ask. If you need more pictures. Just let us know. Thanks for looking and good luck bidding! Payment is due within 7 days of auction end. Wisconsin residents pay 5.5% sales tax. Thank you! All domestic shipments come with a delivery confirmation number. We ship within 1 business day. We will happily combine shipping! International buyers: We ship worldwide! We are happy to combine shipping for multiple purchases. International ... morebuyers responsible for any tax. Duties, VAT, or fees from your country. PayPal required for international purchases. We offer all USPS international shipping options. When paying please remember to scroll down for all shipping options. Cadillac. Packard, Pope-Hartford, Abbott-Detroit, Alco, Allen, Alsace, American, American Underslung, Simplex, Anderson, Apollo, Apperson, Argo, Auburn, Austin, Buick, Baker, Bay State, Beggs, Biddle, Oldsmobile, Oakland, Buick, Bour-Davis, Brewster, Briscoe, Brush, Buffalo, Cameron, Cartercar, Duryea, Stevens Duryea, Pierce Arrow, Case, Chalmers, Chandler, Chase, Cole, Columbia, Corbin, Crane-Simplex, Crawford, Crow-Elkhart, Cunningham, Dagmar, Daniels, Davis, Dort, Dorris, Saxon, Templar, American LaFrance, White, Hupmobile, Franklin, Marmon, Peerless, Doble, Duesenberg, Miller, DuPont, Elco, Elcar, Elgin, Empire, Fageol, Flint, Maxwell, Fiat, Gardner, Reo, Willys, Car, Truck, Paige, Gray, Gray-Dort, Lozier, Hatfield, Haynes, Henderson, Henney, Hertz, Hudson, Hoffman, International, Jackson, Jeffery, Jordan, Kissel, Mitchell, King
|
|
|
Antique brass Lonergan Hit & miss gas engine oiler stationary steam Domestic F&J
Hello, Up for your consideration I have a very nice example of a Lonergan drip oiler made in Philadelphia PA. I have been told these were originally used on Domestic side shafts and some Fuller& Johnson gas engines. I may have been used by other manufactures as well. I am no expert this is just information I have gathered over the years from other collectors. At any rate this is a very nice looking rare oiler. The oiler is approximately 3" wide and 6.25" tall. There are no noticeable wrench marks and no blemishes on the glass. Overall this oiler is in great shape for the age and would look great on any engine. Please ask any questions you may have Item is sold as is. Be sure to check out my other auctions and thanks for looking. Happy bidding!
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Governor Assembly
This is the governor off of my single cylinder Maytag engine. Its in good shape, any questions just ask, thanks
|
|
|
ANTIQUE OILER HIT MISS STATIONARY STEAM ENGINE LUBRICATOR NR
Picked this up at a small Estate Sale Not sure of the age A few dings and dents here and there NO BREAKS TO THE GLASS Please look at all the photos for condition as these old eyes are not as sharp as they once were Happy to answer any questions or send additional photos Happy to combine shipping 14 DAY NO QUESTIONS ASKED RETURNS Check my feedback and bid with confidence
|
|
|
Monitor Antique Hit And Miss Stationary Gas Engine Pump Jack 11/4 Hp Carburetor
A very nice condition carburetor for a Baker monitor hit and miss antique gas engine. Part is loose and looks to be in great shape. Body and check ball made of brass with no cracks breaks or welds. Part looks like it's been totally rebuilt not long ago and should be ready to put in engine and run. Part is sold as is
|
|
|
Antique Vintage Stationary Maytag Engine Kick Start Side Guard Painted Plate
This is the kick start guard off of my Maytag single cylinder engine. Only the face is painted nicely, the backside is not, its in great shape, any questions just ask
|
|
|
4 Antique 4 5/8'' CAST IRON WHEELS Hit & Miss Gas Stationary ENGINE CART MAYTAG
JUST ABOUT 1 INCH WIDE HAVE SOME PITTING SHOULD SURFACE RUST WERE AXLE GOES IS 1/2' ONE WHEEL HAS A FLEA BITE SIZE CHIP
|
|
|
Antique C.L. BARKER Norwalk Conn HIT & MISS Gas Stationary Engine Magneto
Antique C.L. BARKER Norwalk Conn HIT& MISS Gas Stationary Engine Magneto Condition As Shown On This Estate Piece Mounted On Wooden Display. This Makes A Great Display Piece For Your Collection. Tested From Consignee Producing Approximately 6 Volts. Would Make A Fantastic Gift For The Collector! Heavy Piece Measuring: 7.5x8x4.5. Please Use The Photos Provided As Part Of The Auction Listing Description. Please Ask Questions Prior To Bidding. And Make Sure To View Our Other Listings! With Our No-Hassle Money Back Return Policy. You Always Walk Away A Satisfied Customer! Our 100% Positive Feedback Proves How Much We Care About Providing The Best Possible Customer Service For Each& Every Transaction. No Matter The Purchase Price. We Offer A 14 Day Money Back Return Policy For Every PayPal Purchase Shipped Domestically Within The US! Your ... moreMerchandise Will Ship Within 24 Hours Of Your Completed PayPal Payment! Powered by The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Antique Brass Valves Steam Engine Hit Miss Stationary Spigot Release Farm
Both valves are stamped with letter D. I cleaned up one of them by soaking in vinegar for an hour and less then a minute with wire brush. Both are working.
|
|
|
ANTIQUE STEAM GAUGE BUFFALO SPRINGFIELD ROLLER STATIONARY ENGINE HIT MISS NR
Nice Buffalo Springfield Road Roller Ashcroft Steam Gauge. Anywhere in theUSA. $13.50 for shipping. International Buyers pay actual shipping charges including insurance. Plus $5.00. I have had this in my collection for a long time and now have decided to sell it at NO RESERVE. Appears to be in good condition. All parts are present. No cracks breaks or damage. This would be a very nice steam gauge to use on your steam boiler or display in your collection. The pictures tell the story. Plese feel free to contact me with any questions before bidding. Bid with confidence. Thank you for your bids. PLEASE LOOK AT MY FUTURE AUCTIONS FOR ADDITIONAL RARE. INTERESTING, ITEMS FOR SALE. Check out my other items! Buyer must pay within 3 days of auctions end. Anywhere in theUSA. $13.50 for shipping. Shipping must be calculated outside the USA. Items sold ... moreas is. If item is found not as described, contact Seller right away and we'll work it out. I have over 995+ positive feedbacks. No Negatives. I try to be very honest and appreciate your being honest also. All shipping and insurance is the responsibility of the Buyer to pay. Thanks again for your time looking at, and bids on, my items.
|
|
|
Antique Vintage Stationary Maytag Engine Flywheel Good Shape With Hub And Pulley
This is the flywheel off of my single cylinder Maytag engine. Its in great shape, has the magnet, governor, flywheel hub, and a great shape pulley, any questions just ask, thanks 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14a485029b3-0x105-
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Flywheel and Governor
This is the flywheel. And governor off of my single cylinder engine,its in good shape, has normal wear of a 75 year old flywheel, a few scratches and maybe a ding or two on the outer edge, any questions just ask, thanks
|
|
|
Old Antique Auto Engine Exhaust Whistle Hit & Miss Stationary Motor
Good original exhaust whistle in good condition. I couldn't find any makers name or stamp on the whistle. The threaded hole is 1/8 inch NP thread. The bottom of the whistle is the valve and it is cast brass or bronze and the top of the whistle is aluminum. The aluminum part is a little beat up. The complete whistle is about 8 inches tall. I will try the whistle and add more photos tomorrow. I will gladly combine shipping when ever possible. If you have any questions please ask. Thanks for looking. Please see my other auctions for more engine related parts. This item will be shipped via priority flat rate envelope with the U.S. postal service. Buyer pays actual shipping in the U.S. and Internationally.
|
|
|
ANTIQUE BRASS CARB for TWO CYCLE ENGINE - STATIONARY - MARINE - HIT-MISS
ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14a544fb957-0x105-
|
|
|
Splitdorf hit miss antique stationary western engine magneto
Nice splitdorf model ss magneto. Was told this fits a western engine. Barn fresh. Mounting threads and great. Just needs trip and springs. It will bite u if u turn it. But im sure it needs gone trough. Thanks for looking
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Model 92 Engine Oiler/Greaser
This is the crankshaft oiler off of a Maytag engine. Its in great shape, any questions just ask, thanks
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Crankshaft Crankcase
This is the crankcase assembly off of my single cylinder Maytag engine. Its a perfect starting point for a rebuild,its in good shape, and the threads are great, any questions just ask, thanks
|
|
|
Antique Stationary Model 72 Maytag Twin Cylinder Lawn Mower WICO Engine Rare
Up for sale today is my Twin Cylinder Lawn Mower Engine. These are extremely rare, almost never come up for sale, has the original exhaust still, has the very rare rope start pulley, very very neat engine, obviously isn't all there as its missing the mower deck, it has really good compression but the coil is bad so that will have to be replaced, I had the serial number matched on smokestack.com by a guy that knows a lot about these, he said it either came off of a Rotacut or a Velva-Cut Mower, very clean engine, has a very small spot of pitting on the flywheel as you can see in the pictures, good luck bidding, any questions just ask, thanks
|
|
|
ANTIQUE STATIONARY ENGINE CART HIT AND MISS 6 1/2" WHEELS cart 3
You are bidding on an ANTIQUE STATIONARY ENGINE CART HIT AND MISS. Just needs some wood. The wheels are 6 1/2" x 2" Please email me for additional questions. Bid with confidence by viewing all photos for additional description. PICKUP& SHIPMENT DETAILS: Local pickup in Parsons. KS 67357. It can be shipped through Fastenal in Parsons, KS and buyer is responsible for arranging shipment service. If you would like a shipping quote to your local Fastenal, call 620-421-1808. It would go out on a 48x40" pallet. You can leave as long as needed. It could also be shipped through UPS, but would require additional shipment calculations to your area. 25.00 delivered to Portland swap in the spring. KS buyer pays additional 7.4% sales tax. Buyer pays actual shipping calculated at close of auction. Good luck!
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Flywheel Hub And Pulley
This is the flywheel hub and pulley off of a Maytag engine. The hub is in great shape and I wish I could say the same about the pulley but obviously I can't, its beat up, its bent in numerous spots and the pulley hub is cracked, but the flywheel hub is in really good shape, any questions just ask, thanks
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Exhaust HOT Coil
This is the HOT(reads an 5.6 on my meter. Supposed to be between 4 and 6 so this ones very HOT) coil off of a Maytag engine, its in great shape, any questions just ask, thanks
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Flywheel Points Cover
This is the flywheel inspection cover off of my single cylinder Maytag engine. Its in good shape, any questions just ask, thanks
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Condenser Works
This is the working condenser off of a Maytag engine. Its in great shape, any questions just ask, thanks
|
|
|
Antique Alamo Rock Island Empire 1-1/2 HP Hit and Miss Stationary Gas Engine
Engine has been in my shed for many years and its just one of those projects I can see I'm not going to get around to playing with. It has no visibile frost damage. It is rusted tight and does not turn. It appears to have originally had an EK magneto that was broken off and is not present. There is a broken trip piece for magneto(photoed. No oiler. Brass tag reads 1-1/2 h.p. RPM 500 and No. 109578. I will deliver within 250 mile radius of Shawano. WI for ro.00 per loaded mile(Minimum charge of $50) or pick it up at our shop. Or you can pick it up at our Shawano WI Farm. We would like to be paid within 7 days of purchase, but you have up to 2 months to pick the engine up. This could be crated for $75 and buyer would be responsible shipping arrangements and charges. We accept Paypal. Payments should be in US funds. Please remember that ... moreif you are paying by e-check. That we do not mail the item until funds have cleared through your paypal account. We strive to offer 5-star service and ship within 2 business days of sale. We try to offer the most affordable shipping available for our customers. We do not charge a handling fee of more than 25 cents. Unless mentioned specifically in the item?s description. Unless stated directly in the item description, shipping rates should be available to you via a rate calculator on the item?s page. We estimate packed weight of items. Unless they are?pick-up only? items, prior to listing them for sale. We are always happy to combine items, when possible, so that your shipping costs will be less. You may be able to save significantly on shipping charges for heavier items if you live in the upper Midwest. Spee-Dee Delivery often affords great savings on shipping of heavier items for our customers in Wisconsin. Northern Illinois, Minnesota, North Dakota, South Dakota, Nebraska, and Iowa. My Auctions Add to Favorites Contact Me eBay Store About Me On Dec-20-14 at 06:06:33 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Antique Brass Oiler Hit & Miss Stationary Steam Engine Lunkenheimer #5 Parts
Selling With No Reserve! Hi! I have for Auction here a lot of assorted antique Brass Gravity Feed Oilers. There is at least 1 Lunkenheimer that is No. 5 Sentinel. There are missing and broken parts. See Pictures. I'm selling them as is. Get yourself a great deal here. Local pick-up is always welcome. But I require cash payment or there will be a $25 fee or 10% whichever is greater! I will combine shipping if you buy multiple items. But I can't send the combined invoice until Monday afternoon. Do not pay for the items before you recieve the combined invoice because I will not refund any money after items are paid. For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. ... moreWe accept payment thru Pay-pal. Cash is required for pick-up items or a $25 fee.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" with no warranty or guarantee unless otherwise stated. Al
|
|
|
sattley wico ek magneto braket hit miss antique stationary engine
nice original sattley ek magneto braket. no breaks or repairs. rare g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14aaab20ccb-0x108-
|
|
|
Antique Vintage Stationary Maytag Single Cylinder Engine Cylinder Head
This is the cylinder head with NO broken or cracked fins. Off of my single cylinder Maytag engine, its in good shape, any questions just ask, thanks
|
|
|
Antique Hit Miss Steam Engine Fly Ball Governor Tractor Fam Stationary Cast Iron
Up for sale in this auction we have an Antique 2 Ball Fly Ball Governor for a Hit& Miss Engine. The governor seems to be in good condition as it does move freely and the only issue that we can see with it is the bottom two mounting tabs that have the bolts going through them are slightly bent. The governor is approx. 11 1/2" tall. The top sprocket gear is approx. 2" across and is 15 tooth. Great piece for restoration project or to complete an engine! This Fly Ball Governor for a Hit& Miss Engine is selling with NO RESERVE and only on a 3 Day Auction! Buyer pays fixed rate USPS Priority Mail Shipping of $18.20 as it will be professionally packed to assure it is not damaged in shipment. Full payment is due within 2 days of auction end with no exceptions or item will be re-listed or offered to back up bidder. Thanks for looking, ... moregood luck bidding and please email with any questions! And again make sure to check out our other auctions of other great old engines and parts from this collection!
|
|
|
antique hit miss ECONOMY/HERC. open geared pump jack stationary engine
nice rebuilt open geared economy/herc. pumpjack instead. great for shows. can hold up to 30 days if paid for.
|
|
|
Antique Vintage Stationary Maytag Engine Head Cylinder Parts Piston Stuck Lot
These are cylinders off of single cylinder Maytag engine. The one with the piston is stuck, and the rod of the piston is no good, its bent, and the other head has two broken fins, one on both sides, rusty cylinder also, needs to be honed, any questions just ask
|
|
|
Antique Vintage Maytag Stationary Engine Single Cylinder Coil Tower Cap
This is the smaller of the 2 coil caps that were used on these engines. Should work great, any questions just ask, thanks
|
|
 |