Antique Briggs Antique Briggs Stratton Antique Engine Antique Stationary Engine Brass Oiler Brass Petcock Briggs Fh Briggs Fi Briggs Wmb Briggs Z Briggs Zz Diesel Engine Marine Drip Oiler Economy Engine Magneto Engine Oiler Fairbanks Fairbanks Morse Book Fairbanks Morse Engine Fairbanks Morse Z Flat Belt Flat Belt Pulley Flat Belting Fuller Johnson Galloway Engine Grease Cup Hercules Engine Hit And Engine Hit Miss Cart Hit Miss Coil Hit Miss Engine Cart Hit Miss Engine Ihc Hit Miss Engine Oiler Hit Miss Engine Parts Hit Miss Flywheel Hit Miss Gas Tank Hit Miss Head Hit Miss Magneto Hit Miss Model Hit Miss Waterloo Ihc Ihc Engine Ihc La Ihc Lb Ihc Lb Engine Ihc M Ihc M Engine Ihc Magneto International Hit Miss Engine International La Engine International Lb International Lb Engine International M Engine John Deere E John Deere E Engine John Deere Hit Miss John Deere Hit Miss Engine John Deere Model E John Deere Stationary Engine La Lb Engine Lauson Lister Lister Diesel Lubricator Lunkenheimer Lunkenheimer Oiler Magneto Brass Marine Maytag 72 Maytag 72 Engine Maytag 82 Maytag 92 Maytag Engine Maytag Engine 82 Maytag Engine Parts Maytag Hit Miss Maytag Model 72 Maytag Muffler Mccormick Deering Hit Miss Model Hit Miss Engine Novo Engines Old Engine Predator 212 Predator Engine Stationary Engine Parts Stationary Motors Steam Boiler Steam Engine Parts Steam Pump Stover Stover Engine Stover Engine Parts Vintage Briggs Webster Magneto Wico Wico Ek Magneto Wico Magneto Wisconsin Engine Witte Witte Engine
 In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
24.00
Buy It Now
Free Shipping
Condition: New
Location: Holtwood, United States
1.5" wide by .125" thick- 10' long . You are buying a 10' piece. Please see attached pictures for better description of what it looks like. Belt laces ... morenot included! Ten feet of belting only. Thank you.
$
6.79
Buy It Now
$4.02 Shipping
Condition: New
Location: Le Mars, United States
1/8" thick leather belting 1" flat surface.
$
19.99
Buy It Now
$8.85 Shipping
Condition: New – Open box
Location: Hatboro, United States
Please see our other listings as we offer combined shipping. An invoice will be sent after all purchases have been made.
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: Fredonia, United States
This is a idler pulley so ti doesn't have a set screw Fits appropriately 1 1/4 inch shaft Sold as pictured
$
8.11
Buy It Now
$4.43 Shipping
Condition: New
Location: Le Mars, United States
1/8" thick belting 3" flat surface. Sold by the foot.
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: Fredonia, United States
This is a idler pulley so ti doesn't have a set screw Fits appropriately 1 1/4 inch shaft Sold as pictured
$
9.70
Buy It Now
$4.43 Shipping
Condition: New
Location: Le Mars, United States
1/8" thick belting 4" flat surface. Sold by the foot.
$
20.00
Buy It Now
$20.10 Shipping
Condition: Used
Location: Orient, United States
Flat Belt Pulley. holes have been drilled all around the pulley. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. If ... moreyou decide you don't want it or find another one cheaper, I won't take it back.
$
7.56
Buy It Now
$4.43 Shipping
Condition: New
Location: Le Mars, United States
1/8" thick belting 2 1/2" flat surface. Sold by the foot.
$
50.00
Buy It Now
$25.00 Shipping
Condition: Used
Location: Duluth, United States
Selling a nice pulley from a 1-2 HP international, good shape, no cracks or anything, back side has hammer marks from beating it off the camshaft
$
10.19
Buy It Now
$4.02 Shipping
Condition: New
Location: Le Mars, United States
1/8" thick leather belting 1 1/2" flat surface.
$
79.99
Buy It Now
$27.80 Shipping
Condition: Used
Location: Orient, United States
Flat belt pulley for ANY Hit and Miss Engine. I have been collecting hit miss engines for 35+ years and I am very knowledgeable. Cast iron painted red. ... more4" wide belt face. If you decide you don't want it or find another one cheaper, I won't take it back.
$
250.00
Buy It Now
$78.16 Shipping
Condition: Used
Location: Mason City, United States
Used Endless Flat Belt. A heavy duty, thicker than most endless belt. NO PO Boxes. It is very dirty. And very stiff.
$
36.94
Buy It Now
$75.12 Shipping
Condition: Used
Location: Canada
$
149.95
Buy It Now
$60.00 Shipping
Condition: Used
Location: Bennington, United States
Made by International Harvester in the United States, this belt pulley wheel is designed to work with a variety of hit and miss steam engines. The wheel ... moreis in great shape and functions perfectly. I'm not expert on many things and cannot describe every detail, so look closely at pictures.
$
899.99
Buy It Now
Condition: Used
Location: Campbellsport, United States
ORIGINAL Appleton Hero #1 Burr Mill or Corn Grinder. This is very early as it can be used for horsepower or flat belt power. This should be late 1890’s ... moreor early 1900’s. This is the neatest burr mill made with the large center gear.
$
19.99
Buy It Now
$8.85 Shipping
Condition: New – Open box
Location: Hatboro, United States
Please see our other listings as we offer combined shipping. An invoice will be sent after all purchases have been made.
$
8.00
Buy It Now
$4.02 Shipping
Condition: New
Location: Le Mars, United States
Belt lacing for leather flat belt. Order to the width of your belt.
$
49.00
4d 12h 16m 9s
0 bids
$8.82 Shipping
Condition: Used
Location: Liberty, United States
There is no keyway in this pulley, it has a place for a set screw however I don't have one.
$
19.99
Buy It Now
$8.85 Shipping
Condition: New – Open box
Location: Hatboro, United States
Please see our other listings as we offer combined shipping. An invoice will be sent after all purchases have been made.
$
39.99
Buy It Now
$14.99 Shipping
Condition: New – Open box
Location: Lombard, United States
Selling one more set of New pulley castings. Please see photos for details. Thanks for looking
$
50.00
3d 6h 17m 53s
0 bids
$20.34 Shipping
Condition: Used
Location: The Dalles, United States
An antique flat belt clutch pulley with v belt. May have gone to an industrial sewing machine or some other piece of equipment. The flat belt pulley are ... more3" and 4" The v belt is 6"" Be sure and use pictures as description. It is 10" tall
$
65.00
Buy It Now
$16.00 Shipping
Condition: Used
Location: Sherwood, United States
For your consideration is a Flat Belt Pulley that could be fit a cream separator, line shafting or for a hit Miss Engine. It has “M.R.” and “26” cast ... moreinto 2 spokes. It has a set screw only.
$
39.99
Buy It Now
$14.99 Shipping
Condition: New – Open box
Location: Lombard, United States
New pulley castings. Please see photos for details. Thanks for looking
$
250.00
Buy It Now
$1000.00 Shipping
Condition: For parts or not working
Location: Sherman, United States
Please review photographs carefully for condition and compatibility Please contact me with questions and I can get you a good quote in shipping cost I ... morethink at low RPM pulley is stationary . Then at high speed it spins.
$
299.99
Buy It Now
$99.99 Shipping
Condition: Used
Location: Lombard, United States
Was picked up at a farm sale and used condition with surface rust some pitting, normal, wear and tear from use over the years. Spins freely. Please see ... morephotos for details. Thanks for looking Shipping price to the lower 48 only 93 pounds as pictured
$
49.00
4d 13h 31m 8s
0 bids
$8.82 Shipping
Condition: Used
Location: Liberty, United States
There is no keyway in this pulley, it has a hole for a set screw however it is not threaded and smaller than normal.
$
75.00
Buy It Now
$20.00 Shipping
Condition: For parts or not working
Location: Sherman, United States
Please review photographs carefully for condition and compatibility
$
54.99
Buy It Now
$14.37 Shipping
Condition: Used
Location: Alamance, United States
Pulley is in overall good condition with.
$
33.99
Buy It Now
$53.51 Shipping
Condition: Used
Location: Lusby, United States
Antique Hit& Miss Gas Steam Engine Line Shaft Flat Belt Paper Pulley 8" x 12" Selling With No Reserve! Hi! I have for Auction here a Flat ... moreBelt Paper Pulley. It is 8" in diameter and has a 12" wide face. The shaft size is 2-1/2" IT has some scuffs and wear but is a good solid Pulley. Help yourself to a good deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business
$
82.50
Buy It Now
$13.90 Shipping
Condition: Used
Location: Gold Beach, United States
The Pulley Is Approx 3-1/4" x 9-1/4". The Bolts Are Rusted In Place. The Modified (a central plate was welded in) Sprocket Is Approx 8-3/4". These Were ... moreNot Used Together, By Chance, They Fit Together Nicely.
$
36.99
Buy It Now
$20.50 Shipping
Condition: Used
Location: Alamance, United States
Up for sale is an old flat belt pulley with a tapered bore. Pulley is in overall good condition with. no cracks or repairs.
$
34.97
Buy It Now
$18.40 Shipping
Condition: Used
Location: Fredonia, United States
Vintage Hit Miss Gas Steam Engine Line Shaft Flat Belt Pulley 4 x 5 3/4 X 1/2 Shaft. Nice used condition fits 1/2 shaft Sold as pictured condition
$
75.00
Buy It Now
$14.50 Shipping
Condition: For parts or not working
Location: Sherman, United States
Please review photographs carefully for condition and compatibility
$
42.95
Buy It Now
$61.55 Shipping
Condition: Used
Location: Mount Holly Springs, United States
Pulley
$
149.95
Buy It Now
$30.57 Shipping
Condition: Used
Location: Holgate, United States
Here is a very nice bolt on 10" Cast Iron Pulley for John Deere Corn Sheller 1A or 1B. It appears to be in great shape. Mounts to the sheller with 3 bolts ... moreabout 2-13/16" apart on center. I am sure there are other excuses also but I don't care and don't want to hear them.
$
49.99
Buy It Now
$69.25 Shipping
Condition: Used
Location: Drakesville, United States
16 inches in diameter and 8 inches wide. Keyed bore. Bore is for 1 3/4 inch shaft and is straight, not taper. there is one small area of fiber degradation ... moreas shown in the pictures. Actual weight is 38 lbs. 
$
175.00
Buy It Now
$55.28 Shipping
Condition: Used
Location: Mason City, United States
There are 3 small removable bolts in the hopper section. There was a green plastic funnel mounted on this grinder but that funnel was old plastic and ... morehad various cracks in it. That funnel is not included but I can send photos of it.
$
105.12
Buy It Now
Free Shipping
Condition: New
Location: Jonestown, United States
New and improved 15 Pc Serpentine Belt Tool now includes a locking flex-head ratcheting wrench for better access. New locking flex-head ratcheting wrench ... morehas 5-locking positions (straight, +2 positions and -2 positions).
$
27.99
Buy It Now
$13.57 Shipping
Condition: Used
Location: Alamance, United States
Up for sale is an old flat belt pulley with a tapered bore. Pulley is in overall good condition with. no cracks or repairs.
$
50.00
Buy It Now
$6.72 Shipping
Condition: New
Location: Le Mars, United States
Flat belt pulley to make an ice cream machine with a hit and miss enigne.
$
199.99
Buy It Now
$78.68 Shipping
Condition: Used
Location: Union Grove, United States
1-1/8" arbor. Antique Flat Belt Step Pulley.
$
50.00
Buy It Now
$8.75 Shipping
Condition: Used
Location: Sherman, United States
Slight casting flaw
$
75.00
Buy It Now
$14.50 Shipping
Condition: Used
Location: Sherman, United States
As photographed Please review photograph measurements carefully
$
42.95
Buy It Now
$35.15 Shipping
Condition: Used
Location: Mount Holly Springs, United States
Pulley
$
42.95
Buy It Now
$36.05 Shipping
Condition: Used
Location: Mount Holly Springs, United States
Pulley
$
138.00
Buy It Now
$60.90 Shipping
Condition: Used
Location: Elizabethtown, United States
Cast pulley.
$
49.99
Buy It Now
$24.55 Shipping
Condition: Used
Location: Alamance, United States
Pulley is in overall good condition with no cracks. or repairs and both set screws are free. Once I have received your.
$
80.76
Buy It Now
$19.89 Shipping
Condition: New
Location: Columbia, United States
3 1/2" OD X 2 1/2" FACE WERE BELT RUNS X 1 5/8" BORE SET SCREW AND KEYWAY. YOU ARE LOOKING AT A NEW FLAT BELT PAPER PULLEY. PULLEY WAS MADE BY US HERE ... moreAT paper pulleys inc. pulley may look a little different than picture.
$
114.95
Buy It Now
$17.10 Shipping
Condition: Used
Location: Holgate, United States
Here is an original flat belt pulley for most that will fit lots of different smaller hit and miss engines. It will also work great for other applications. ... moreCheck out the pictures and see if you need it.
$
54.00
Buy It Now
$6.72 Shipping
Condition: New
Location: Le Mars, United States
Flat belt pulley to make an ice cream machine with a hit and miss enigne.
$
50.00
Buy It Now
$14.50 Shipping
Condition: For parts or not working
Location: Sherman, United States
The bore on this has unequal wear. Please review photographs carefully. Also a lot of deep pitting on surface
$
200.00
Buy It Now
$69.89 Shipping
Condition: Used
Location: Mason City, United States
Note: One of the mounting cast iron base brackets is broken off, but is shown & included in the photos. Of course this can be repair welded. No PO Boxes.
$
50.00
Buy It Now
$14.50 Shipping
Condition: Used
Location: Sherman, United States
Please review photographs carefully for condition and compatibility
$
99.99
Buy It Now
$19.99 Shipping
Condition: Used
Location: Union Grove, United States
Antique Machinery Parts.
$
114.95
Buy It Now
$17.10 Shipping
Condition: Used
Location: Holgate, United States
Here is an original pulley for most that will fit an Associated Chore Boy or Hired Man and or smaller United hit and miss engines. It will also work great ... morefor other applications. It has a couple small casting flaws on the face that will not hurt a thing.
$
95.00
Buy It Now
Free Shipping
Condition: Used
Location: Bridgewater, United States
1-3/8” bore
$
30.00
Buy It Now
$30.70 Shipping
Condition: Used
Location: Lewistown, United States
LISTING IS FOR A DECENT APPROX 11.5" X 6.5" ENDLESS BELT IT NEEDS A SPLICE CONECTOR I AM LISTING MORE ENDLESS BELTS SEND ME YOUR ZIP CODE FOR MORE ACCURATE ... moreQUOTE ON SHIPPING THANKS 
$
18.47
Buy It Now
$31.49 Shipping
Condition: Used
Location: Canada
1
 In 

Former Listings  
 
5" FLAT BELT 24 ft MACHINE BELTING hit miss engine Tractor Buzz Saw Threshing
Offered without reserve is a continuous roll of flat leather machine belting from an estate. This was out in the barn next a buzz saw so I suspect that this is what it was used on. It measures 5" wide and approx. 24 feet long(it's in a continuous loop that is approx. 12 feet long end to end) it is approx. 1/4" thick. This is the type of belting you would see used at the hit and miss/ old engine or tractor shows used to run various farm type equipment such as Threshing machines, saws, water pumps, corn grinders etc. The belting remains in good pliable condition but it has some slight lifting of the long tapered scarf end lap joints that I think a bit of adhesive or a few rivets would correct. I think that it is perfectly useable with many many years of life left, hopefully someone can put it to good use.No Reserve! have fun bidding! ... moreThanks for looking! The Shipping cost is calculated for the least expensive method to ship from NY to California. If you live closer the cost may be lower, we will charge the actual amount to ship. If you would like another shipping method like priority mail we will give you the cost after the auction has ended. please ask for a calculation of the cost. please Email me with any questions. I'll be glad to answer them! Sorry, we will not end the auction early for any offers as to be fair to all bidders. If you don't intend to complete the transaction, please don't bid. All Sales are Final: I try to give a full description, and show plenty of good pictures so that you know what you're bidding on. If there's something you feel is missing from the description, Email me before you bid please.Buyer pays S&I. N.Y. state residents please add 8% tax. Sorry, no local pickup. sorry, NO Overseas shipping! Payment is expected within 3 days of auction closing.
230" x 4" Hit & Miss Gas Steam Engine Line Shaft Flat Belt Belting
230" x 4" Hit& Miss Gas Steam Engine Line Shaft Flat Belt Belting Selling With No Reserve! Hi! I have for Auction here a 230" x 4" Flat Belt. It has seen lot's of use and is a little stiff. It would work great for cutting a smaller belt out of. Help yourself to a great deal! Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. ... moreMI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan. We do Dem
328" x 4" Hit & Miss Gas Steam Engine Line Shaft Flat Belt Belting
328" x 4" Hit& Miss Gas Steam Engine Line Shaft Flat Belt Belting Selling With No Reserve! Hi! I have for Auction here a nice used Flat Belt. It is very pliable. It is a little dirty and has some wear. But is still a good usable Belt. Help yourself to a good deal. Happy Bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: ... moreOur items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan. We do Demolition. Junk Removal, an
Volta Belting Plier F-51 Welding V-Belt, Round Belt, Flat Belt
In great cosmetic and working condition. Please ask all questions before purchasing. Volta Belting Plier F-51Cat. No. 8130201. This versatile tool is used when welding: V-belt sections ranging from 8/M to 32/D. Round belts with diameters from 2 mm(1/8” to 20 mm(3/4” Flat belts with widths up to 50 mm(2”
Lot of Antique Hit & Miss Gas Steam Engine Line Shaft Leather Flat Belt Belting
Lot of Antique Hit& Miss Gas Steam Engine Line Shaft Leather Flat Belt Belting Hi! I have for auction here 3 small rolls of Belting. 2 of them are leather. They are 1-1/2" in diameter and measure 16 feet and 115" long. The 16 foot long one is a good belt. The other one would be good for display but I don't know if it could be used. The 3rd belt is 15-1/2 feet long and 1-1/2" in diameter. It is a braided cloth belt. It is somewhat stiff, but it looks like it could still be used or would be great for display. Help yourself to a great deal! Happy bidding! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction ... moreend. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship within 24 hours of payment. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity a
VINTAGE LEATHER FLAT BELT hit miss steam engine drive belting 6" x 107"
vintage used leather machine belt approx 1/4" x 6" x 107" long mfg unknown please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1452bfa3ad9-0x114-
VINTAGE LEATHER FLAT BELT hit miss steam engine drive belting 3 1/4" WIDE
VINTAGE LEATHER FLAT BELT hit miss steam engine drive belting 3 1/4" WIDE Description vintage used leather machine belt. Approx 1/4" x 6" x 12 FEET LONG long. Mfg unknown. Please check my other auctions and happy bidding!SEE PICTURES FOR DETAIL. Payment Paypal or Pay at pickup other pay options contact me. Payment must be made withen 3 days of auctions end.Thankyou Shipping I ship Prioirty mail on glass& pottery parcel post on everything else.insurance is INCLUDED IN THE SHIPPING ON ALL POTTERY& GLASS& FRAGIL ITEMS. International Buyers? Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Other ... moreinformation a seller may wish to include: These charges are normally collected by the delivering freight(shipping) company or when you pick the item up? do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Shipping fees are the responsibility of the buyer I DO COMBINE SHIPPING ON MULPITAL ITEMS shipping is based on location and item weight when boxed.All pottery& glass items are shipped priority mail I use parcel post& ups on the rest.UPS IS USED ONLY WHEN IT IS TO BIG FOR USPS I SHIP FREIGHT THRU YELLOW TRUCKING TERMINIAL TO TERMINIAL.I RESERVE THE RIGHT TO CHANGE SHIPPING PROVIDERS ALL international sales are for the EXACT selling price, no exceptions, to do otherwise violates the laws of the United States and your country! Terms of Sale* PLEASE REVIEW ALL PHOTOGRAPHS FOR ADDITIONAL INFORMATION* THEY ARE SUPPLIED TO PROVIDE A VISUAL DESCRIPTION TO ADD TO THE VERBAL DESCRIPTION SHOWN ABOVE. 14 DAY RETURN POLICY THE DETAILS ARE YOU HAVE 3 DAY UPON RECIVING THE ITEM WITH THE TRACKING# FOR ANY PROBLEMS AFTER 3 DAYS NO RETUR
Antique Hit & Miss Gas Steam Engine Line Shaft Flat Belt Belting 21' x 4"
Antique Hit& Miss Gas Steam Engine Line Shaft Flat Belt Belting 21' x 4" Selling with No Reserve! Hi! I have for auction here a nice pliable 4" Flat Belt. It is 21 feet and 3" long. The lacing on the one end needs to be replaced. It has a few strings sticking off the side but is a good usable Belt. H elp yourself to a good deal! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David ... moreShell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship within 24 hours of payment. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business locat
Antique Stationary Steam Engine Threshing Machine 3" Flat Belting
Roll of belting is pliable has been kept inside and dry thanks
Antique Farm Steam Stationary Engine Steampunk 2" Flat Belting Lot #5
2" wide x 10' 8" long taken apart(strung out flat)
Antique Farm Steam Stationary Engine Steampunk 2" Flat Belting Lot #4
2" wide x 5' long(spliced) or 10' long taken apart.
Antique Farm Steam Stationary Engine Steampunk 2" Flat Belting Lot #3
2" wide x 28" long(spliced) or 56" long taken apart.
Antique Farm Axelite No. 15 Steam Stationary Engine Steampunk 4" Flat Belting #1
4" wide and 6 feet long(with splice in) or 12 feet long taken apart. It has a splice-this is a factory made belting material. Has been inside for years so somewhat stiffer but will get more flexible with use. Kept dry thanks
Antique Farm Steam Stationary Engine Steampunk 3.5" Flat Belting Lot #2
3.5" wide and 6.5' long(still spliced) or 13' long taken apart. Good condition and kept dry. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-1499cb40cba-0x10c-
Vintage 4" Rubber Flat Belting Steam Stationary Engine Threshing Machine Lot 24
26" diameter around the outside of the roll. Roll is 8" across, usable rubber belting for your old engine or threshing machine thanks
45 deg. flex turn conveyor, 40" wide flat flex belting (qty. 2 units)
Flat flex 45 deg. flex turn conveyors(Auction is for qty. 2 units. Electric drive(Untested)Units located in our Georgia Warehouse. Sold as-is Shipping not included. We can arrange shipping or you can make your own arrangements. Items will be strapped to pallets and loaded from our dock at no charge.
2yd SILVER LUREX METALLIC FLAT BRAIDED MILLINERY HAT TRIM BELTING CORD STRAW VTG
DESCRIPTION:2 yards of 1950s silver lurex metallic flat braided trim. Variety of uses. Millinery, clothing, accessories or other projects. Measures 3/4 inch wide by 2 yards long. Unused old store stock cut from original roll. The roll is not included in this listing. Many of my photos are taken with and without fllash so please look all photos over carefully and use zoom feature to get the best idea of coloring. Size and condition. Extra items that may be in the photos. I.e. mannequin hand, floral bouquet or doll shoe, are used for scale purposes only and are not part of this listing. Check out my! COMBINED SHIPPING: I combine all wins into one package for reduced shipping fees. If the checkout does not give you shipping discount for combined wins. Please email me and I will adjust invoice before you pay. International customers, please wait ... morebefore paying until I adjust invoice with exact postage. Powered by The free listing tool. List your items fast and easy and manage your active items.