|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States O.A.L: 11" of vise body. JAW OPENING: 4". JAW WIDTH: 4". JAW HEIGHT: 1-3/8". CLAMPING FORCE: 9,000LBS. PULL-TYPE DESIGN FOR UP TO 80% LESS DEFLECTION. ... moreALL SIDES FLATNESS TO 0.0001".
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States JAW OPENING: 6". JAW WIDTH: 6". JAW HEIGHT: 1-7/8". CLAMPING FORCE: 10,000LBS. We appreciate your cooperation for giving us opportunity to show our quality ... moreservice! PULL-TYPE DESIGN FOR UP TO 80% LESS DEFLECTION.
Buy It Now
$112.60 Shipping Condition: Used Location: Watsontown, United States BRIDGEPORT VISE 6" WIDE JAW 5" JAW OPENING NICE& SMOOTH OPERATION REMOVABLE HANDLE APPROX 65 LBS NO DRILL HOLES Any questions please email ... moreor feel free to call Delaney's Surplus at 608-643-8009. Closed Tuesdays and Wednesdays.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between ... morejaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features: Lock down design up to 80% deflection. All sides flattened. Can be mounted on side or base. For small to intermediate NC/CNC milling, grinding, tapping operations in multiple vise set-ups with or without sub plates..
Buy It Now
$5.35 Shipping Condition: New Location: Saint Charles, United States 202-9530. Fits all Bridgeport type mills. Clips on quill easily for rapid depth setting, Rapid and positive clamping, We have other quill and vise stops ... moreavailable at: SHARS 4" 440V Milling Vise +/0.0004 4" wide jaw plate. 4" inner jaw opening, 10" outer jaw opening, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 2.25" +/0.0005" Clamping repeatability +/0.0004" Lifetime limited warranty, To learn more. SHARS 6" 670V Milling Vise +/0.0004 6" wide jaw plate. 7.50" inner jaw opening, 15.80" outer jaw opening, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 2.875" +/0.0005" Clamping repeatability +/0.0004" Lifetime limited warranty, To learn more. SHARS 6" 660U Milling Vise +/0.0004 6" wide jaw plate. 6.25" inner jaw opening, 15" outer jaw opening, Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 3.189" +/0.0005" Clamping repeatability +/0.0004" Lifetime limited warranty, To learn more. SHARS 6" 600DS Double Station Milling Vise +/0.0002 6" wide jaw plate, 4.9" jaw opening in double station. 12" jaw opening in single station(conversion kit included) Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts, Jaw lift prevention mechanism by eccentric pin design, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 3.25" +/0.0005" matched bed height at no additional cost) Clamping repeatability +/0.0002" Lifetime limited warranty, To learn more. If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-
Buy It Now
$128.96 Shipping Condition: Used Location: Marengo, United States PULL-TYPE DESIGN FOR UP TO 80% LESS DEFLECTION. ALL SIDES FLATNESS TO 0.0001" ACCURACY BOTH SIDES. SQUARE TO BOTTOM 0.0004" PARALLEL TO EACH ... moreOTHER TO 0.0008" CAN BE MOUNTED ON SIDE OR BASE BOTTOM KEYWAY ATTACHMENT TO LOCK ANDPOSITION THE VISE ON YOUR TABLE SLOT ACCURATELY. MAX. JAW OPENING: 6" JAW WIDTH: 6" JAW HEIGHT: 1-3/4" O.A.L: 15" CLAMPING FORCE: 10.000LBS W.T: 70 LBS Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
$5.75 Shipping Condition: New Location: Eagle, United States Untitled Document Description Item: Vise Jaw Stop(Model: 14-000) Condition: New in Box Specifications Fits all milling machine vises with 1/2" 7/8" ... morethick jaws and 1/8" minimum protrusion 1-1/8" wide body with 2 hardened steel guide pins and large#10 clamp screw 1/8" x 2" hardened stop pin is used to accurately locate work pieces. The stop pin is also adjustable side-to-side to allow for cutter clearance The stop pin is positioned completely below the top surface of vise jaw to allow for cutter clearance Body made from anodized aluminum 8-32 non-marring flat point set screws are used to secure stop rod Vise Jaw Stop The Vise Jaw Stop by Edge Technology Products is the most advanced jaw stop to date. It features a micro stop rod that is positioned below the top surface of the vise jaws for cutter clearance. The stop rod is also adjustable side-to-side to allow space between the unit and the work piece for even more cutter clearance. Patent Pending Payment& Shipping Payments Accepted: Paypa l. Shipping USPS. See Shipping and Payments tab for details. Note: If multiple items are purchased from our store we will combine shipping. Please request a package invoice before you pay. International: Worldwide shipping available. See Shipping and Payments tab for details. International buyers please note that your country's customs department may add additional charges to process your package. We are unable to anticipate these fees and advise you to research your country's customs regulations before you bid. Thank you. Email info@edgetechnologyproducts.com Phone(520)299-1185 Vise Jaw Stop Photo Gallery Related Products by Edge Technology Products Please take a moment to check out the other high quality machinist gages and tools that we offer. Click the button below to go to our Ebay Store.
Buy It Now
$120.25 Shipping Condition: Used Location: Colebrook, United States PULL-TYPE DESIGN FOR UP TO 80% LESS DEFLECTION. ALL SIDES FLATNESS TO 0.0001" ACCURACY BOTH SIDES. SQUARE TO BOTTOM 0.0004" PARALLEL TO EACH ... moreOTHER TO 0.0008" CAN BE MOUNTED ON SIDE OR BASE BOTTOM KEYWAY ATTACHMENT TO LOCK ANDPOSITION THE VISE ON YOUR TABLE SLOT ACCURATELY. MAX. JAW OPENING: 6" JAW WIDTH: 6" JAW HEIGHT: 1-3/4" O.A.L: 15" CLAMPING FORCE: 10.000LBS W.T: 70 LBS Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
$14.88 Shipping Condition: Used Location: North Las Vegas, United States STEVENS ENGINEERING INC. 5" 2-Piece Milling Vise for Bridgeport Milling Machine.
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States "QUADRALLEL". This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest ... moreCraftsman / Inventor the industry has ever seen.
Buy It Now
$151.31 Shipping Condition: Used Location: Middlebury, United States BRIDGEPORT MILLING MACHINE VISE WITH A SWIVEL BASE(JAW 6" JAW OPENING 5" You are bidding on a Bridgeport Milling Machine Vise with a Swivel ... morebase. This Vise has been found to be in good working condition. Specs: Jaw 6" Jaw Opening 5" This Bridgeport Mill Swivel Vise comes with a 14 day return privilege. Shipping can be UPS or it can be picked up locally in Shelton. CT. 14 Day Unconditional Warranty(must return freight prepaid) Check our Store and other Auctions for more great buys. Tag ID 3-28-14-8
Buy It Now
Free Shipping Condition: New Location: Chino, United States Stop Adjusts in 5 different axis. Locking lever is adjustable in 15 degree: increments. Locking lever can be locked positioned in 360 degres to avoid ... moreinterference. Alaska& Hawaii& International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. Columbus. Ohio. 43204 Phone# 1-800-543-5998 Pay me securely with any major credit card through PayPal!
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest Craftsman / Inventor ... morethe industry has ever seen. For Bridgeport type mill, CNC mill, anything using a milling vise.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States The set features a 1/2" table T-slot size and 3/8" stud size (3/8"-16) for compatibility with a variety of milling machines. Made of premium tool steel ... morefor long-lasting performance, all parts are heat treated for added durability and strength.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product description Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between ... morejaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications： Size: 6" Jaw Width: 6" Jaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to .002" on parallelism and Squareness Gross Weight: 59.4lbs (27 ... morekg) Package Dimensions: 18"*13"*6" (45*32*14 cm) Description:.
Buy It Now
Free Shipping Condition: New Location: China Untitled Document Description Item: Vise Jaw Stop(Model: 14-000) Condition: New in Box Specifications Fits all milling machine vises with 1/2" 7/8" ... morethick jaws and 1/8" minimum protrusion 1-1/8" wide body with 2 hardened steel guide pins and large#10 clamp screw 1/8" x 2" hardened stop pin is used to accurately locate work pieces. The stop pin is also adjustable side-to-side to allow for cutter clearance The stop pin is positioned completely below the top surface of vise jaw to allow for cutter clearance Body made from anodized aluminum 8-32 non-marring flat point set screws are used to secure stop rod Vise Jaw Stop The Vise Jaw Stop by Edge Technology Products is the most advanced jaw stop to date. It features a micro stop rod that is positioned below the top surface of the vise jaws for cutter clearance. The stop rod is also adjustable side-to-side to allow space between the unit and the work piece for even more cutter clearance. Patent Pending Payment& Shipping Payments Accepted: Paypa l. Shipping USPS. See Shipping and Payments tab for details. Note: If multiple items are purchased from our store we will combine shipping. Please request a package invoice before you pay. International: Worldwide shipping available. See Shipping and Payments tab for details. International buyers please note that your country's customs department may add additional charges to process your package. We are unable to anticipate these fees and advise you to research your country's customs regulations before you bid. Thank you. Email info@edgetechnologyproducts.com Phone(520)299-1185 Vise Jaw Stop Photo Gallery Related Products by Edge Technology Products Please take a moment to check out the other high quality machinist gages and tools that we offer. Click the button below to go to our Ebay Store.
Buy It Now
$18.40 Shipping Condition: New Location: Derby, United States R8 Collet Rack. Attaches to mill using one of the 1/2" bolts on the column. No modifications to the mill are needed. Made in the USA
Buy It Now
$204.12 Shipping Condition: Used Location: Glassboro, United States Bridgeport Milling Machine Vise- 6" Wide Made in The USA! Bridgeport Milling Machine Vise- 6" Wide 5" max open. No drill marks in vise ... morebed VIse was repainted with industrial paint. Includes handle. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1473cd3a78b-0x115-
Buy It Now
$194.03 Shipping Condition: New Location: Madison Heights, United States JAW OPENING: 8-3/4” (220mm). JAW WIDTH: 8” (202mm). JAW HEIGHT: 1-7/8". CLAMPING FORCE: 10,000LBS. We appreciate your cooperation for giving us opportunity ... moreto show our quality service! PULL-TYPE DESIGN FOR UP TO 80% LESS DEFLECTION.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features: Lock down design up to 80% deflection. All sides flattened. Can be mounted on side or base. For small to intermediate NC/CNC milling, grinding, ... moretapping operations in multiple vise set-ups with or without sub plates. Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. Not recommended to place the jaw plate on the outside jaw to clamp on longer workpiece. Specifications: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8".
Buy It Now
$207.73 Shipping Condition: Used Location: Glassboro, United States OLDER KEARNEY TRECKER MILLING MACHINE VISE 6 3/8" WIDE JAWS. IS DIRTY WITH DRIED OIL. SWARF, WORN PAINT AND SOME LIGHT MILLING/ DRILLING CUTS. IN ... moreGOOD WORKING CONDITION. WEIGHT 65 LBS. COMES AS SHOWN AND SOLD AS-IS. LOCAL PICK-UP OR SHIPPING VIA UPS GROUND. BUYER PAYS ALL SHIPPING CHARGES.
Buy It Now
$105.66 Shipping Condition: Seller refurbished Location: Harker Heights, United States This is a very nice Bridgeport milling machine vise with 6” wide jaws. It is in excellent condition overall and operates very smoothly and is tight. It ... morehas been refurbished including thorough cleaning and painting. There are a few minor mill marks on the bed, but nothing that impacts the operation of this precision tool. This is a heavyweight vise, weighing approximately 75 lbs. Shipped via UPS Ground to the 48 continental states.
Buy It Now
$105.66 Shipping Condition: Seller refurbished Location: Harker Heights, United States This is a very nice Bridgeport milling machine vise with 6” wide jaws. It is in excellent condition overall and operates very smoothly and is tight. It ... morehas been refurbished including thorough cleaning and painting. There are a few minor mill marks on the bes and the main jaw has some nicks, scratches and dings as can be seen in the photos but nothing that impacts the operation of this precision tool. This is a heavyweight vise, weighing approximately 75 lbs. Shipped via UPS Ground to the 48 continental states.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1 x 5 Axis precision milling vise part stop. ➤ 5 Axis precision milling vise part stop. ➤ High precision table mounted part locator stop. Mounting bolt ... moresize: 1/2"-12 thread. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut.
Buy It Now
$201.13 Shipping Condition: Used Location: Bayonne, United States Bridgeport 6" Precision Machinist Milling Vise. Condition: Very good, used (see photos); slides smoothly; shows one small drill mark, milling marks on ... morejaws, and normal signs of use.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Aluminum Quick Quill Stop. Fits Most Bridgeport Type Mills Or Any 1/2"-20 Thread Rod. Weight: 3 ounce. Rapid And Positive Clamping. B rand New.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Size: 6" Jaw Width: 6" Jaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to .002" on parallelism and Squareness Gross Weight: 59.4lbs (27 kg) Package ... moreDimensions: 18"*13"*6" (45*32*14 cm) .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product description Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between ... morejaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features.
Buy It Now
$129.82 Shipping Condition: Used Location: Middlebury, United States Unless otherwise specifically agreed to in writing by. Prefer to pick it up yourself?. Removed From A First MCV 800 Vertical Machining Center Serial No. ... more61100233. Need it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Jaw width: 5 inch (125 mm) Jaw opening: 5 inch (125 mm) Bench clamp vise height: 5-1/2 inch (140 mm) Jaw height: 1-3/5 inch (40 mm) Base ... moreswivel: 360º Clamping force: 24 KN max Gross weight: 51 lb (23 kg) Package dimensions (L x W x H): 16" x 11" x 7" (41 x 27 x 17 cm) Description: 5-Inch Bench Clamp Vise w/ Swivel Base This 5-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping force and can fix workpieces very securely. This ensures the stationary and stability of workpieces, so they won't move even slightly as much force has been applied by the fitter. Features & Details:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product description Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between ... morejaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features Lock down design up to 80% deflection All sides flattened Can be mounted on side or base For small to intermediate NC/CNC milling, grinding, tapping operations in multiple vise set-ups with or without sub plates.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Made Of Aluminum. Light Item.
Buy It Now
$191.51 Shipping Condition: Used Location: Harwinton, United States For sale is a Bridgeport milling machine vise.
Buy It Now
Free Shipping Condition: New Location: China Precision Vise stop. Rod length 55mm.
Buy It Now
$191.51 Shipping Condition: Used Location: Harwinton, United States For sale is a Bridgeport milling machine vise.
Buy It Now
Condition: Used Location: Watertown, United States 6" Bridgeport Mill Vise milling machine table vice with swivel base and handle 6" Bridgeport Mill Vise milling machine table vice with swivel ... morebase and handle SPECIFICATIONS: JAW LENGTH: 6 JAW HEIGHT: 2 JAW OPENING: 5 Country of Mfg: USA* RETURN POLICY: This purchase comes with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all shipping fees on return UNLESS we ship the wrong item. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused. Please contact seller by email for the RMA# CONTACT US For all questions or issues please email us at parts@robonex.com* or Call us M-F 9:00 am to 5:00 pm EST at(330) 408-5353* PAYMENTS: PayPal- We accept Visa/MasterCard. Discover and Amex through PayPal only. For personal checks please send your checks electronically via PayPal. If you make the payment through PayPal. We can ONLY ship to your PayPal confirmed address. No exceptions. Payment must be received within 5 days or a Non Paying Bidder Alert will be filed. FEEDBACK: Feedback is an integral part of eBay. Please leave feedback for us on eBay and we will do the same for you. If you are considering leaving us negative or neutral feedback. Please give us the opportunity to resolve the issue first. We will try our best to help you. Powered by
Buy It Now
$5.45 Shipping Condition: New Location: Lodi, United States Fits many Machines like- HAAS, OKUMA, MAZAK, HURCO, FADAL, BRIDGEPORT. vise keys are used to align your vise to your milling machine table. You can set ... morea vise on your machine table and have it aligned automatically within 0.003".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Made of high quality casting steel for long life and increased durability. All parts heat treated. 7/16" T-Slot, 3/8"-16 stud size, & 1" step ... moreblock width (all standard) Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder More clamps, collets, holders, and Bridgeport tooling in the Description： Low cost,Highest cost performance Brand New & High Quality Durable Good after-sales service Package List:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications： 4-inch Lock Down Vise High Precision & Simple Operation & Heavy Duty During workshop operation, many workpieces were minor damaged due ... moreto their excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. .
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States GOOD CONDITION USED 4" SWIVEL BADE PRECISON MILLING MACHINE LOCKDOWN VISE! FITS BRIDGEPORT OR BRIDGEPORT TYPE MILLS LOOKING FOR A GOOD HOME! THANKS ... moreFOR LOOKING AND DON'T FORGET TO CHECK OUT OUR OTHER METALWORKING PRODUCTS AS WELL. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. Shipping and Handling Shipping weight: 40 lbs. Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$239.26 Shipping Condition: Used Location: Harwinton, United States For sale is a Bridgeport heavy duty milling machine vise.
Buy It Now
$201.13 Shipping Condition: Used Location: Bayonne, United States Bridgeport 6" Precision Machinist Milling Vise. Condition: Very good, used (see photos); slides smoothly; includes one 6-1/2" jaw only; shows drill & ... moremilling marks, and normal signs of use.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
$1.25 Shipping Condition: New Location: Canada MILLING MACHINE ! PERFECT FOR THE MILLING MACHINE !! All our stickers are outdoor durable!
Buy It Now
$157.60 Shipping Condition: New Location: Madison Heights, United States JAW OPENING: 6". JAW WIDTH: 6". JAW HEIGHT: 1-7/8". CLAMPING FORCE: 10,000LBS. We appreciate your cooperation for giving us opportunity to show our quality ... moreservice! PARALLEL TO EACH OTHER TO 0.0008".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
$92.20 Shipping Condition: Used Location: Long Beach, United States BRIDGEPORT 6” MILLING MACHINE VISE MACHINIST VICE MILL PART TOOL.Moves smoothly. Yes I can ship and professionally package. or pickup locally. Long Beach ... moreny 11561. I have some other machinist tools I am listing that came from a mechanical engineering department at a school.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications： Type: Bench Vise Jaw height: 1.3" (32 mm) Jaw width: 4" (100 mm) Jaw opening: 4" (100 mm) Jaw material: 45# steel Body material: HT250 ... moregray cast iron Wrench material: QT500 ductile iron Vise Height: 3.9" (98 mm) Max Clamping force: 19 KN Gross weight: 34lbs (11.9 kg) Package dimensions (L x W x H): 15" x 10" x 6" (36.5 x 25 x 15.5 cm) Features ：.
Buy It Now
$6.90 Shipping Condition: New Location: Rochester, United States 202-9530. Fits all Bridgeport type mills. Clips on quill easily for rapid depth setting, Rapid and positive clamping, We have other quill and vise stops ... moreavailable at: SHARS 4" 440V Milling Vise +/0.0004 4" wide jaw plate. 4" inner jaw opening, 10" outer jaw opening, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 2.25" +/0.0005" Clamping repeatability +/0.0004" Lifetime limited warranty, To learn more. SHARS 6" 670V Milling Vise +/0.0004 6" wide jaw plate. 7.50" inner jaw opening, 15.80" outer jaw opening, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 2.875" +/0.0005" Clamping repeatability +/0.0004" Lifetime limited warranty, To learn more. SHARS 6" 660U Milling Vise +/0.0004 6" wide jaw plate. 6.25" inner jaw opening, 15" outer jaw opening, Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 3.189" +/0.0005" Clamping repeatability +/0.0004" Lifetime limited warranty, To learn more. SHARS 6" 600DS Double Station Milling Vise +/0.0002 6" wide jaw plate, 4.9" jaw opening in double station. 12" jaw opening in single station(conversion kit included) Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts, Jaw lift prevention mechanism by eccentric pin design, Made from 80.000PSI stress relief cast iron, Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 3.25" +/0.0005" matched bed height at no additional cost) Clamping repeatability +/0.0002" Lifetime limited warranty, To learn more. If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1 x 5 Axis precision milling vise part stop. ➤ 5 Axis precision milling vise part stop. Mounting bolt size: 1/2"-12 thread. ➤ High precision table mounted ... morepart locator stop. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications： Jaw width: 3.15 inch (80 mm) Jaw opening: 3.15 inch (80 mm) Bench clamp vise height: 4.3 inch (110 mm) Jaw height: 1.2 inch (30 mm) Base ... moreSwivel: 360º Clamping force: 15 KN max Gross weight: 18lb (8.1 kg) Package dimensions (L x W x H): 11.4" x 7.9" x 5.7" (29 x 20 x 15 cm) Features & Details： PREMIUM QUALITY STRUCTURE：The whole bench clamp is made of high-quality iron material with high hardness and stiffness. Designed for long-term service time..
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Made of high quality casting steel for long life and increased durability. All parts heat treated. 7/16" T-Slot, 3/8"-16 stud size, & 1" ... morestep block width (all standard) Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder More clamps, collets, holders, and Bridgeport tooling in the Product Description: Low cost,Highest cost performance Brand New & High Quality Durable Good after-sales service .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO ▫▫ Air Tools ▫▫ Air Riveters ▫▫ Air Saws& Blades ▫▫ Compressors& Tanks ▫▫ Grease Guns ▫▫ Grinders& ... moreGinding Discs ▫▫ Hammers. Drills& Screwdrivers ▫▫ Hopper Texture Guns ▫▫ Hoses. Reels& Accessories ▫▫ Nail Guns& Nails ▫▫ Paint& Spray Guns ▫▫ Punch Flange Tools ▫▫ Sand Blasters ▫▫ Sanders ▫▫ Sockets. Ratchets& Impacts ▫▫ Automotive ▫▫ Accessory Lights ▫▫ Air Compressors& Portables ▫▫ Air Horns ▫▫ Auto Body& Frame ▫▫ Auto Maintenance& Care ▫▫ Diagnostic Tools ▫▫ Electrical. Wiring& Testers ▫▫ Jacks. Engine Stands& Hoists ▫▫ Specialty Tools ▫▫ Tie Downs ▫▫ Tires& Wheels ▫▫ Truck. Trailer& Accessories ▫▫ Batteries ▫▫ 12 Volt SLA Batteries ▫▫ 12AH SLA Batteries ▫▫ 17 18 20 AH SLA Batteries ▫▫ 32 33 34 35 AH SLA Batteries ▫▫ 4 4.5 5 AH SLA Batteries ▫▫ 7 7.2 7.5 8 AH SLA Batteries ▫▫ 9 10 AH Batteries ▫▫ Misc. 12V SLA Batteries ▫▫ 6 Volt SLA Batteries ▫▫ 10. 12 AH SLA Batteries ▫▫ 4. 4.5, 5 AH SLA Batteries ▫▫ APC Computer Back Up Batteries ▫▫ Motorcycle Batteries ▫▫ 12N12A-4A-1 ▫▫ 12N12A-4A-1 AGM ▫▫ 12N14-3A ▫▫ 12N7-3B ▫▫ 12N9-4B-1 ▫▫ 12N9-4B-1 AGM ▫▫ 6N2-2A ▫▫ 6N2A-2C ▫▫ 6N4-2A ▫▫ 6N4B-2A ▫▫ 6N5.5-1D ▫▫ 6N6-1B ▫▫ 6N6-3B ▫▫ 6N6-3B-1 ▫▫ B54-6 ▫▫ YIX30L ▫▫ YT12B-BS YT12B-4 ▫▫ YT14B-BS YT14B-4 ▫▫ YT7B-BS YT7B-4 ▫▫ YT9B-BS YT9B-4 ▫▫ YTX12-BS ▫▫ YTX12A-BS ▫▫ YTX14-BS ▫▫ YTX14AH-BS ▫▫ YTX14AHL-BS ▫▫ YTX14L-BS ▫▫ YTX16-BS-1 ▫▫ YTX20-BS ▫▫ YTX20L-BS ▫▫ YTX24HL-BS ▫▫ YTX4L-BS ▫▫ YTX5L-BS ▫▫ YTX7A-BS ▫▫ YTX7L-BS ▫▫ YTX9-BS ▫▫ YTZ10S ▫▫ YTZ12S ▫▫ YTZ14S ▫▫ YTZ7S ▫▫ NiCd Batteries ▫▫ AA NiCd Button Top Cells ▫▫ Sub C NiCd Cells w/Tabs ▫▫ Optima Blue Top Batteries ▫▫ Optima Red Top Batteries ▫▫ Optima Yellow Top Batteries ▫▫ Other Batteries ▫▫ Power Wheel Batteries ▫▫ Replacement for GREEN Battery ▫▫ Replacement for RED Battery ▫▫ Replacement Dewalt Batteries ▫▫ 12 Volt Dewalt Replacements ▫▫ 14.4 Volt Dewalt Replacements ▫▫ 18 Volt Dewalt Replacements ▫▫ 24 Volt Dewalt Replacements ▫▫ 9.6 Volt Dewalt Replacements ▫▫ Rep
|
|
|
|
BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE
aims BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Bridgeport. This is a Milling Machine Vise with Swivel Base in good condition. Features: Hardened vise bed. Hardened jaw plates. Semi-hard steel screw. The 360 Swivel Base makes this vise amazingly versatile. Specifications: Jaws: 6" wide x 2" deep. Vise Capacity: 5" Overall Dimensions: 17" x 12" x 6-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ... moreBRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE Reliable Tool Inc. c 2011 | Powered by
|
|
|
Bridgeport 6 " Milling machine vise with handle USA
Bridgeport Milling Machine Vise with Handle. 6" with swivel base. Swivel tunse easy and graduations are clear and easy to read. Some light machine marks on base and jaws. Normal for a vise of this age. Ships UPS Ground to Lower 48 Only. Discount for local pickup Photo used in this template courtesy of the USAF. 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13ede3ed25c-0xfc-
|
|
|
Lathe Clausing Milling Machine Bridgeport Machinist Vise Clamp Free Shipping
O.K. First let me say if you are looking at this item you probably know more about it than I do. What I can tell you is that it appears to be some type of clamp or hold down device. I could find no name or numbers on this item. I am out of my area but will do my best to answer all questions. Any questions please e-mail me prior to auction's closing. I will combine items to save shipping charges. I ship on Mondays- Saturdays. Thanks for looking. Disclaimer: Buyer will indemnify. Defend, and hold seller of this listing harmless from and against any and all costs, liabilities, losses and expenses(including attorneys’ fees and costs of defense) resulting from any claim, suit, action, or proceeding alleging personal injury or property damage caused by buyer’s acts or misconduct; and any other damages or losses caused by buyer’s breach of this ... moreagreement. The operation of power-tools and equipment is dangerous and should only be performed by those individuals successfully trained to operate said equipment. Your bid is your understanding of this statement and your agreement to these terms. I enjoy selling on ebay to better than 99% of all you out there. Most have bought from me multiple times. I will do my best to describe anything I sell as accurately as I can. If I make a mistake or you do and it won't fit your saw. Bike, or trimmer contact me before you leave negative feedback and I bet we can work something out. What I do not enjoy is trying my best and someone ordering a part hoping it will fit and it not and then without even sending me a message leaving me negative feedback. Given a chance that problem could have been avoided. To the better than 99% thanks, I appreciate your business. Bin Loc B 5. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
BRIDGEPORT 6 INCH MILLING MACHINE VISE WITH SEPARATE HANDLE
You are bidding on a used 6" Bridgeport milling machine vise. Model 6-14, with separate crank handle. As you can see from the photos. The vise shows signs of use, but it was generally well cared for and works smoothly. I got this vise with a mill that I purchased from a friend. His father owned a machine shop and took great care of his tools, and my mill is a testament to this. I suspect this vise was purchased with the mill sometime in the 1960's. I don't use it much and it spends most of its time on the floor, so it its time for it to find a good home. The vise has a 6" jaw width. 2 1/8" jaw depth, and opens 5" It is about 20" long overall. Shipping weight is 80lbs. If you live nearby. You are welcome to pick it up, but it will be packed for shipping. Because of the weight of this item, I am only selling ... moreit in the U.S. Overseas shipping would be cost prohibitive. Bureaucratic Info: The winning bidder must contact me no later than one day after the end of auction to arrange for payment and payment. If mailed must be received no later than seven days after the end of auction. California residents must pay sales tax. Happy Bidding!
|
|
|
Price Reduced Used 6" Machine Vise Bridgeport Chevalier Kent CNC Mill Milling
Nice used 6" Machining Vise typically used on Knee Mills(Bridgeport) or on CNC Machining Centers. Seems to be tight and work smoothly. Cleaned and ready to use. Buyer pays all shipping; Ohio sales tax rules apply; Payment must be received within 5 days of close of sale. Sold AS IS Keyword Kurt Wilton Enco Vise Vises
|
|
|
BRIDGEPORT 6" MILLING MACHINE VISE W/ 360 DEG. SWIVEL BASE Handle
This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with FEDEX GROUND. AK HI to pay actual shipping. Sorry. No international shipping. Maybe to Canada, please email if interested. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. LZW This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with FEDEX GROUND. AK HI to pay actual shipping. Sorry. No international shipping. Maybe to Canada, please email if interested. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item ... morefor sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. LZW_gsrx_vers_486(GS 6.5.1(486)
|
|
|
Kurt Anglock Anglok Milling Machine Vise Used for Bridgeport Made in USA Steel
Used Kurt Anglock Milling Machine Vise in good working condition. Made in USA. A couple marks here and there as every milling vise has but functions as it should. Jaws are 6" wide. VERY heavy. Over 70 lbs. Will ship in 2 boxes to save YOU on shipping and MY back. Last 2 pictures show what will come in each box. If you don't think you can assemble this vise please don't bid. What you see is what you get. Ask questions BEFORE bidding. Shipping to USA Address Only.
|
|
|
BRIDGEPORT MILL 4" SWIVEL BASE PRECISION BASE MILLING MACHINE LOCKDOWN VISE USED
GOOD CONDITION USED 4" SWIVEL BADE PRECISON MILLING MACHINE LOCKDOWN VISE! FITS BRIDGEPORT OR BRIDGEPORT TYPE MILLS LOOKING FOR A GOOD HOME! THANKS FOR LOOKING AND DON'T FORGET TO CHECK OUT OUR OTHER METALWORKING PRODUCTS AS WELL. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. ... moreShipping and Handling Shipping weight: 40 lbs. Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Machine Vise For Rockwell Clausing Bridgeport Atlas Mill Milling Machine
Nice vise that is the right size for smaller milling machine Note one of the jaws has been milled Jaws are removable so if u need to u can make another one Jaws open 2 1/2 inches and are 4 3/4 wide This is an old American made vise I can fit it in a flat rate box but there won't be much room for packing or if u wanna pay more I will pack in a larger box box for added protection Your choice I will charge actual shipping if u decide to go with larger box I can't guarantee safe delivery in the flat rate box though Posted with
|
|
|
Kurt(?) Milling Machine Vise Swivel Base Machinist Tool Box Find For Bridgeport
See pics of actual item. Still needs to be cleaned up. Has grease and dirt on bottom along with a lil rust. Was used on a bridgeport at a machine shop where I only saw Kurt vises so I am guessing it fits a Kurt but I am not positive. Mounting pin is 1-1/4" Posted with
|
|
|
Kurt Ang Lock Milling Machine Vise D60 With Handle Machinist Tool Bridgeport Etc
Kurt d60 6" milling machine ang lock vise. See pics of actual vise you will receive and it's handle. Must be crated for proper shipment but we will take care of that for you. Posted with
|
|
|
Atlas Milling Machine M1-301 Vise, Machinist Mill Clausing Bridgeport Craftsman
Atlas Milling Machine M1-301 Vise This vise does not come with the swivel base. Nor handle. Has about six threaded holes on castings. Other than that all casting have no damage and are in excellent condition. Jaw moves smoothly, freely with no issues. No damage to feed screw or adjacent assembly. Jaws are in great condition, Very clean, still usable as is and fully functional. Keyways, x and y, at base in great condition. These Atlas Milling Machine M1-301 vises are rare and hard to come buy in this compact size for smaller metalworking machines. Please study photos for all details.
|
|
|
6" VISE FOR BRIDGEPORT MILL MILLING MACHINE DRILL PRESS
NICE USED 6" MILLING MACHINE VISE OPENS 5" NO HANDLE. 1/2 SQUARE SHAFT 014-02-01-A PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO ... moreBE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PIC
|
|
|
KURT STYLE ABWOOD 8 INCH JAW VISE CNC BRIDGEPORT MILLING MACHINE MACHINIST
LARGE ABWOOD MILLING VISE JAWS ARE 8 INCHES WIDE. OPENS TO ABOUT 7 INCHES, SEEMS TO GO A LOT MORE GETS STIFF WHEN CLOSING IT WITHOUT CRANK HANDLE AT 3 ½ INCHES NO CRANK HANDLE INCLUDED WEIGHS 123.5 POUNDS. PICK UP IS WELCOME PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. WE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING INSURANCE: We package items as well as we can, making the extra effort to ensure they arrive intact& undamaged. We can not, however, be liable for loss or damage in the mail. RETURN ... morePOLICY: We describe the items as accurately as possible. IF THERE IS ANY DAMAGE WE WILL MENTION IT IN LISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
|
|
|
BRIDGEPORT MILLING MACHINE VISE STOP FIXTURE TOOL machinist tools *C
BRIDGEPORT MILLING MACHINE VISE STOP FIXTURE TOOL machinist tools info/sizes: 3/4" shaft size. See photos for detail I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have ... moreyour shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
BRIDGEPORT 6” MILLING MACHINE VISE~ONTARIO, CALIF.
BRIDGEPORT 6” MILLING MACHINE VISE USED BUT IN GOOD WORKING CONDITION COMES AS SHOWN( SEE ALL PICS) WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 4 DAYS OF PURCHASE! ATTENTION! EFFECTIVE JANUARY 1. 2012 BELTRAN INDUSTRIAL SALES WILL BE CHARGING A $25.00 FEE FOR EACH ITEM REQUIRING A PALLET. THIS WILL INCLUDE A STANDARD 48" X 40" PALLET. METAL BANDING, AND STRETCH WRAP IF NEEDED. ANY ITEM REQUIRING A LARGER OR CUSTOM PALLET/CRATE WILL BE EXTRA. PLEASE CALL FOR DETAILS. CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! PLEASE. PLEASE, PLEASE CALL AHEAD! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY RETURN SHIPPING MUST BE PAID BY THE BUYER! WE ENCOURAGE ALL BUYERS TO VIEW ALL PHOTOS AND ASK ALL APPROPRIATE QUESTIONS PRIOR TO MAKING FINAL PURCHASE! ... moreALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? FEEL FREE TO CALL ROBERT(626) 945-6018 OR GABRIEL(626) 945-6951 DON'T FORGET TO VISIT OUR STORE TO VIEW A WIDE VARIETY OF USED& NEW INDUSTRIAL MACHINERY. TOOLS, EQUIPMENT, MORE! INVENTORY CHANGING DAILY! THANK YOU FOR YOUR BUSINESS! by adding my eBay Store to your Favorites!
|
|
|
KURT ANGLOCK 6" x 1-3/4" MILLING MILL MACHINE VISE FOR BRIDGEPORT - #D60
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is a Kurt Milling Vise in Good Working Condition. Item Features& Specifications: Jaw Dimensions: 6" Wide x 1-3/4" Tall Center to Center of Mounting Holes: 7-1/2" Maximum Capacity: 5-1/2" Base Dimensions: 8-1/4" x 16-3/4" Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
|
|
|
4 INCH JAW VISE CNC BRIDGEPORT MILLING MACHINE MACHINIST CLAMP RUSSETT VTG
This is a very nice 4" jaw machinist vise. Approximately 1960's vintage Russett Brand 4"+ jaw opening 3" wide 7.25" overall length
|
|
|
Bridgeport Milling Machine Vise - 6" Wide Made in The USA!
Bridgeport Milling Machine Vise- 6" Wide Made in The USA! Bridgeport Milling Machine Vise- 6" Wide 5" max open. No drill marks in vise bed VIse was repainted with industrial paint. Includes handle. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1473cd3a78b-0x115-
|
|
|
Bridgeport milling machine vise 7" wide jaws 1.5" high 5" opening
Bridgeport milling machine vise. Jaws open 5" are 7" wide and 1.5" deep. Weight is 90lbs Shipping is $155.00 via UPS.
|
|
|
HEAVY DUTY 6" MILLING MACHINE VISE for Bridgeport Mill
This is a Heavy duty 6" Milling Vise opens to 5 inches in new condition. Old stock 1980's Perfect Tool Importers of New York Model#150'K' Type Japan
|
|
|
DECKEL MILLING MACHINE 90 ANGLE VISE MILL DRILL PRESS ENGRAVER BRIDGEPORT
Oldie but goodie. Milling. Engraving or drill press vise, Lightly used in a gauge shop ON OUR DECKEL AND BRIDGEPORT MILLS. 2-1/2" x 2-1/2 x 1-1/2 capacity Overall sizes: 4 x 4 x 10 and 12 lbs. PAYMENT: We accept PayPal or CASH at Pick Up. Purchaser to pay all shipping costs. Taxes and/or Border costs if applicable. SHIPPING: We strive to ship within 1 business day of receipt of cleared payment. We can provide skidding or crating at an additional charge…Please email for price. RETURNS: No returns.All items are sold as is-where is with no warranty expressed or implied. GENERAL TERMS: All items are subject to prior sale. We do not claim to be experts in all that we sell and it is assumed that the buyer is knowledgeable and proficient as to the use or condition of this type of equipment. Please ask questions and study the photos before bidding. ... moreTHANK YOU!
|
|
|
ERON 6" MILL MILLING MACHINE VISE W/ SPEED HANDLE FOR BRIDGEPORT - WEBB - LAGUN
NEED A SPECIFIC ITEM& YOU CAN'T FIND IT ANYWHERE. WE HAVE IT! CALL US@ 909.544.8882 ASK FOR BRANDON! The Item You Are Bidding On Is a Milling Machine Vise In GREAT. Working Condition. Features: ALL ITEMS FEATURE A NO HASSLE RETURN POLICY. PLEASE READ FULL DESCRIPTION FOR ALL ITEM DETAILS! Item Specifications: Manufacture: Eron Jaw Length: 6" Jaw Height: 1-3/4" Mounting Bolt Center to Center: 8" Item Comes Exactly as Shown in Pictures. If You Want To Arrange Shipping Please Contact Us For A Quote. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-149d3f5e154-0x110-
|
|
|
6" Bridgeport type milling machine mill table vise with swivel base
Selling a 6" vise with a swivel base to be used on a Bridgeport or Bridgeport type milling machine. The vise is in good working condition. COMES AS PICTURED Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
Vise Handle for Kurt Vise 3/4" Hex for CNC Mill and Bridgeport Milling Machine
Vise Handle for kurt vises with 3/4" hex or other milling machine vises with 3/4" hex.
|
|
|
ENCO 6" MILLING MACHINE VISE BRIDGEPORT CINCINNATI TREE GRIZZLY JET B & S ETC.
ENCO 6" MILLING MACHINE VISE BRIDGEPORT CINCINNATI TREE GRIZZLY JET B& S ETC. Brand Enco Packaging None Condition Excellent Quantity 1 Looks like it has seen very little use. No holes in it. Just has petina from storage. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Kurt AngLock D675 6" Vise for Milling Machine/Bridgeport
Used but great condition Kurt AngLock 6" vise. Item has been clean and lubricated. Ready for use. Some signs of wear and identification stamp marks, but does not effect function. Item sold as is. Sorry, no handle. I will cover about half of the shipping. UPS. Email for any questions.
|
|
 |