|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$70.91 Shipping Condition: Used Location: Chicago, United States Here we have a Vintage Simplex 47lb(about) Bench or Table Vise. The Jaws are about 4 1/4 in wide and opens about 8 1/2 in. It's used and has some ... moreslight rusting and paint damage but it works well and you can choose to clean it up and make it shine if you desire. It's a heavy work horse and will get the job done. If you have any questions feel free to ask!
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Description： Parallel ... moreJaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. Package Including：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness Features:.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Description： Parallel ... moreJaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. Package List: 4" Multi-purpose Rotating Bench Vise New Multi Purpose Vise .
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel Serrate steel jaws Oversized striking anvil Heat treated ... moreshaft 3 Down slots 360° Double locking swivel base Precision crafted and designed to provide dependable service and satisfaction Industrial quality Heavy duty cast steel construction Hardened and polished replaceable jaws and large anvil Swivel base allow you to get the angle on your workpiece*FREE SHIPPING COST TO THE LOWER 48 STATES ONLY COLOR MAY VARY PAYPAL VERIFIED AS OF 2002 We only accept PayPal. If paying with PayPal please wait for your payment information to update. DO NOT CLICK'PAYMENT SENT' if you are paying with PayPal. This makes it difficult to find your payment information and will delay shipping time. Most items are eligible for a shipping combination. These items must be paid for together. And recieve a 20% discount off total shipping costs. Please wait to receive your combined invoice, do not go through checkout until your combined invoice has been sent! Please note that it is the buyer's responsibility to maintain their shipping address updated. Items will be shipped to the address registered as the shipping address with Ebay/and-or/Paypal at the time of payment. Any updates to the shipping address must be made prior to payment. WE DO NOT ALLOW PICKUPS. NO PICKUPS. NO EXCEPTIONS. We do not ship to unregistered addresses. Your address must be registered with both Ebay and Paypal. We DO offer shipping to PO Boxes. However all shipments to PO Boxes must be made through USPS. If you require shipping to a PO Box you must pay using the USPS shipping option. It is the buyer's responsibiity to receive the package. Or pick it up from the carrier's location. If a package is returned to us because the Buyer failed to pick it up, or receive it then they will be issued a refund for the Purchase Price of the item, not including Shipping And Handling Costs and minus both a 15% restocking fee and return shipping costs. Most of our shipm
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well ... moreas round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. This vise features a jaw opening scale and rotation scale. The jaw opening scale is used to approximate the jaw opening size while the rotation scale provides approximate angle readings through 180-degrees. Features Rotating jaws Rotating base Jaw opening scale Rotation scale Base locking lever .
Buy It Now
Free Shipping Condition: New Location: Walton, United States They're great mill accessories and drill press accessories. Our jaw covers are useful for woodworking, jewelry making, gunsmithing and so much more. Product ... moreincludes one set of vise jaw pads (2 pads).
Buy It Now
$18.00 Shipping Condition: Used Location: Whitewater, United States Has normal usage wear,has some surface rust,needs a cleaning,weighs about 15 pounds without packaging, please look at all photos for condition and description
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR 6.5" Bench Vise w/ Anvil Swivel Locking Base Heavy Duty Ductile Iron Vice. VEVOR 4" Accu Lock Vise Lockdown CNC Milling Machine Vise Plier Milling. ... moreVEVOR 6" Precision Milling Machine Vise Bench Clamp Lock Vise CNC Vise Drilling.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features: Durable Material.
Buy It Now
Free Shipping Condition: Used Location: Norwich, United States YOST Bench Vise. Jaws are in good condition. Opens to 3".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well ... moreas round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. This vise features a jaw opening scale and rotation scale. The jaw opening scale is used to approximate the jaw opening size while the rotation scale provides approximate angle readings through 180-degrees. Features Rotating jaws Rotating base Jaw opening scale Rotation scale Base locking lever .
Buy It Now
$50.00 Shipping Condition: Used Location: Norwich, United States Good rugged vise. Jaws are in good condition. Made in USA.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point ... moreholding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package List: 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise. Swivel Multipurpose Bench ... moreVise. A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity. 360 Degrees Rotation. Precision & Hardness. Durable Material Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time..
$35.10 Shipping Condition: Used Location: Worcester, United States Vintage Grenvh Bench Vise Anvil Pipe Jaws Swivel Base 3 1/4 " Made in Japan. Please examine the photos provided and use them as a guide for determining ... moreacceptable condition. Thanks for looking
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
Buy It Now
$60.00 Shipping Condition: Used Location: Norwich, United States Rugged vise. Jaws are in good condition. One swivel jaw shown in photos. Jaw pin is included. Swivel base. One mounting ear is broken as shown in last ... morephoto. Made in USA.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： 3" Cross Slide Vise (Black) 3" jaw width. 3" jaw opening. 1" jaw depth. Height: 5" Base Dimensions: 6-1/2" L x 4" W Weight: 11 lbs. 4" ... morelongitudinal and 4.5" cross travel. 3" Cross Slide Vise (Blue) 2-3/8" throat opening, 4" longitudinal and 4.5" cross travel, jaw width: 3" - Maximum Vise and cross slide have adjustable shims Cross slides have removable adjusting crank handles.
Buy It Now
Free Shipping Condition: New Location: Azusa, United States Made from durable cast steel construction, this vise is built to last and withstand heavy use. The double locking swivel base allows for 360-degree rotation ... moreand perfect positioning of your workpiece, making it easy to turn in any direction after mounting.
Buy It Now
$45.85 Shipping Condition: Used Location: Middlebury, United States Missing One Tightener For The Swivel Base. Weight (lbs, oz): 25. Need it urgently?. Call us and we will do what we can to get it to you quickly. Will ... morethere be a dock or forklift. Prefer to pick it up yourself?.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A ... more4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Details: Serrate steel jaws. Oversized striking anvil. Heat treated shaft. 3 Down slots. 360° Double locking swivel base. Product Feature: Precision ... morecrafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Note: Color May Vary..
Buy It Now
Free Shipping Condition: New Location: Chino, United States 🔩 Made from high-quality rubber and thickened design, our vise jaws are strong and abrasive resistance. Housolution Multi-Purpose Vise Jaw Pads. 🔩 Strong ... moreembedded magnets to ensure that they will stay firmly in place once attached to your table vise.
Buy It Now
$4.47 Shipping Condition: New Location: Maumee, United States Note : We can build aluminum or brass jaws to fit your vise.
Buy It Now
$129.00 Shipping Condition: Used Location: Flushing, United States Snap-on Wilton 1750 Machinist Bullet Vise Swivel Base Anvil 5” Jaws Bench Vise This vise is in good shape. Typical wear and tear. Handle is very easy ... moreto turn, no hard points. Swivels nicely and locks down securely in any position with ease. Still in very good cosmetic shape and functions excellent. The jaw plates are worn and don't quite touch when the clamp is all the way in. Larger chip in one jaw plate. Snap-On nameplate still with plastic cover Will be packaged securely to avoid damage in shipment
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point ... moreholding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Package including： 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 4" Multi-purpose Rotating Bench Vise. Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding ... morepower. Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Brand turitrade Jaw Width 4'' Jaws Opening 4'' Throat Depth 2'' MPN Does Not Apply Clamping Force 15Kn UPC Does not apply UPC Does not apply.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 4" Multi-purpose Rotating Bench Vise. Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique"V" jaws provide 4 ... morepoint holding power. Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open: 2" V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 W.T: 30 LBS Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point ... moreholding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Package including： 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Description： Parallel ... moreJaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. Package Included：.
$10.00 Shipping Condition: Used Location: Bradenton, United States This is a Vintage Ohio Forge Bench Vice. You don't see these Branded as "Ohio Forge" too often as they are a bygone Manufacturer for private labels. Home ... moreDepot once used them as a mainstay for thier branded vises. This one has 4 inch Jaws, a swivel, Anvil and is in very good shape. It's one for collectors, or can be used as you main bench vise tool. There will be some assembly as the swivel will be separated from the body to get it in a reasonably priced shipping container. Please view photos carryfully. There are some mars in the red paint that coats the devise.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel ... moreJaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
Buy It Now
Free Shipping Condition: New Location: Lathrop, United States So what are you waiting for?. We will provide you with a satisfactory solution. DUAL-PURPOSE COMBINATION : This vise can be screwed firmly to the workbench ... moreor table with screws, it can also be conveniently clamped on the workbench as well.
Buy It Now
$58.00 Shipping Condition: Used Location: Clay Center, United States Well this is good news for someone I somehow accumulated six more vices this last year from auctions I just kept putting them underneath my workbench. ... moreThis is a nice one very good condition cosmetically looks great if functions great it should be being used by someone. If you have any questions feel free to ask, and as usual thank you for lookin Wieght 42lbs
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description 4-inch Lock Down Vise High Precision & Simple Operation & Heavy Duty During workshop operation, many workpieces were minor damaged due to ... moretheir excessive force. Therefore, we recommend that you use the vise to clamp. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. Features & Details Premium Quality Structure: The jaw of the bench vise is made of 45# steel. After high-frequency quenching, the wear resistance of the jaw is improved and the service life is prolonged. The vise body is HT250 high-quality cast iron forging with good toughness, high strength, and durability. .
Buy It Now
$18.95 Shipping Condition: Used Location: Mason, United States Nice condition with typical wear with age of preowned item. Note that this is the actual item in the photos and no stock photos. The item is functional ... moreand tested if applicable to listing. Please see the photos for further review of the condition. I am a US seller based in Michigan. Non-smoking mold free storage! Thank you for your interest in the item.
Buy It Now
$96.10 Shipping Condition: Used Location: San Bernardino, United States
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Features & Details.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： 3" Cross Slide Vise (Black) 3" jaw width. 3" jaw opening. 1" jaw depth. Height: 5" Base Dimensions: 6-1/2" L x 4" W Weight: 11 lbs. 4" ... morelongitudinal and 4.5" cross travel. 3" Cross Slide Vise (Blue) 2-3/8" throat opening, 4" longitudinal and 4.5" cross travel, jaw width: 3" - Maximum Vise and cross slide have adjustable shims Cross slides have removable adjusting crank handles.
Buy It Now
Free Shipping Condition: New Location: Azusa, United States [JAW]: Replaceable, hardened, forged steel jaws;. [LOCKING BASE]: Double locking swivel base, perfect for turning any direction you want after mounting;.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： -Material: Ductile cast iron -Jaws width: 4'' -Jaws opening: 4'' -Throat depth: 2'' -Clamping force: 15kn -Hardness: 46-52hrc Key features： ... more-Durable material： -Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. -Powerful clamping jaws -These jaws adjust well to the workpieces to provide powerful clamping pressure while reducing marring for superior grip. -Swivel base -The base of the vise can also rotate 360 degrees, allowing for optimal work placement. With fixing holes and pins, it can achieve stable operation. -Quality lead screw.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well ... moreas round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. This vise features a jaw opening scale and rotation scale. The jaw opening scale is used to approximate the jaw opening size while the rotation scale provides approximate angle readings through 180-degrees. Features Rotating jaws Rotating base Jaw opening scale Rotation scale Base locking lever .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Serrate steel jaws. Oversized striking anvil. Heat treated shaft. 3 Down slots. 360° Double locking swivel base. Feature: Precision crafted ... moreand designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. High performance,reliable quality We work with every effort to provide quality products and professional service. Note: Color May Vary. .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. ... moreHead swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel ... moreJaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Description： Parallel ... moreJaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. Package Included：.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A ... more4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications： Type: Bench Vise Jaw height: 1.3" (32 mm) Jaw width: 4" (100 mm) Jaw opening: 4" (100 mm) Jaw material: 45# steel Body material: HT250 ... moregray cast iron Wrench material: QT500 ductile iron Vise Height: 3.9" (98 mm) Max Clamping force: 19 KN Gross weight: 34lbs (11.9 kg) Package dimensions (L x W x H): 15" x 10" x 6" (36.5 x 25 x 15.5 cm) Features ：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Jaw Opening: 2" Jaw Width: 3" Head Rotates 360 degrees and Tilts 45 degrees Rubber Bumpers Aluminum Body Clamps onto surfaces up to 2" Thick ... moreDescription： Material - Rubber bumpers, aluminum body to deliver strength for gripping different kinds of objects. Features - Head rotates 360° and tilts 45°, which is very convenient to turn in any direction after mounting. It provides the best angle for your work. Design - Clamps onto surfaces up to 2" thick for general purpose and light-duty work..
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features: Durable Material.
Buy It Now
Free Shipping Condition: Open box Location: Vancouver, United States D2482 Multi-Positioning Hobby Vise-Suction Description: This handy. Go-anywhere vise features a powerful suction mechanism that securely attaches the ... morevise to any smooth, flat surface. The swivel-head can be positioned in just about any configuration and locks in place with a high torque lock-ring. Ideal for hobby use around the home or take it anywhere. Steel jaws have protective rubber pads and measure 2-3/4" wide. Open capacity is 2-1/2" Specifications: 2-3/4" Wide 2-1/2" Capacity Rubber Jaw Pads Swivel Head Powerful Suction Mechanism SHIPS SAME DAY IF PAID FOR BY 4PM PST Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition. As received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel ... moreJaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
Buy It Now
Free Shipping Condition: New Location: Chino, United States Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A ... more4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
Buy It Now
Free Shipping Condition: New Location: Meadow Lands, United States It is essential tool for fitters. Most work of the fitters is completed by using the clamping vise such as sawing, filling, chiseling and some of assembly ... moreand removal jobs. Our cross slide vise is an essential tool for fitters, 360-degree swivel base, flexible operation. Our clamping vise has powerful clamping force and can fix workpieces very securely. Features ---Durable material. The vise is made of high-quality cast iron, with strong toughness, high tensile strength, and wear resistance. Internal refine grinding treatment, smooth use, no jamming, rust, and corrosion resistance. ---Plat nose pliers. When clamping the work piece, the work piece is in the jaws and the force is even, and it can be used normally. Jaw opening capacity: 2.5 inch, 3 inch, or 4 inch.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States
Buy It Now
$112.54 Shipping Condition: Used Location: Middlebury, United States Moveable Jaw Housing Has A Crack (See Pics). Size: Length: 20 in. Width: 12 in. Height: 11 in. MPN: No. 20. Weight (lbs, oz): 62. Need it urgently?. Call ... moreus and we will do what we can to get it to you quickly.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States Contains 4 inches wide jaws, 5 inches jaw opening, and 2.9 inches throat depth Made of 90,000 PSI tensile strength drop forged steel Exerts 5,500 LBS ... moreof clamping force and comes with replaceable machinist and pipe jaws Comes with 360 degree swivel base, large anvil, and corrosion resistant black oxide handle Includes a lifetime warranty Use this bench vise for all kinds of woodwork, metalwork, sawing, drilling, and gluing things together! Not your average bench vise, this beast is made of 90,000 PSI tensile strength (54,000 psi yield strength) drop forged steel, a large anvil, and corrosion resistant black oxide handle. The guiderails are adjustable to help increase precision and smoothness on the job.
|
|
|
|
Vintage Cast Iron Chief Swivel Bench Vise with Anvil and 4” Jaws– Model L4 Old
Vintage Cast Iron Chief Swivel Bench Vise with Anvil and 4” Jaws– Model L4 Auction Item: Vintage 4” Cast Iron Chief Swivel Bench Vise with Anvil. If you’re looking for a quality built vintage USA made bench vise this is the one for you. Model Number: L4 New/Used: Used Approximate Dimensions in Inches- Jaws are 4” wide. Stands 6” tall. 6” wide and is 10 ½” long when closed. Maximum jaw opening is 3 1/4" Condition: In very good used condition with no rust. Screw turns freely. Vise does have some marks and imperfections consistent with use and age. The only flaw with this vise is that when the jaws are completely closed there is a small gap of about 1/16” on the right side of the jaws. Please see the last picture depicting this condition. As Shown– All auctions are WYSIWYG(What you see is what you get) Questions: Do not hesitate to ... moreemail questions BEFORE you bid. Terms: No International sales. Shipping costs are for contiguous USA states only. We accept Paypal. Payment must be received within three(3) days of auction ending date. This auction is for Serious Bidders only. If you don’t intend to pay– don’t bid. Good luck and happy bidding! Don’t forget to check out our other auctions.
|
|
|
USA Made Scout 4" bench vise / anvil / pipe jaws Swivel Base
Vintage Scout 4" bench vise. Great condition w/ no cracks or welds. Original paint looks great. Features swivel base& pipe jaws. Measures approx 10" long(closed) 6" tall. Jaws are 4" wide. Opens up to 4" Weighs 12lbs. Please see pics& feel free to ask any questions. Posted with o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13e16451222-0xf9-
|
|
|
MILLING MACHINE ALUMINUM BENCH VISE JAWS 1-1/4 X 1-1/2 X 6 (SET OF 2) #9429
Description: MILLING MACHINE ALUMINUM BENCH VISE JAWS 1-1/4 X 1-1/2 X 6" 5/8" COUNTERBORED HOLES 3" CENTER TO CENTER QUANTITY: 2 USED; MAY SHOW SIGNS OF USE IF YOU DO NOT SEE WHAT YOU WANT IN OUR STORE. PLEASE MESSAGE US AND LET US KNOW. WE HAVE A LARGE INVENTORY THAT HAS NOT YET BEEN LISTED AND MAY HAVE WHAT YOU NEED. We try to describe every item the best that we can. Although we do have experience in the toolng industry we don't know everything. Please ask questions and we will be happy to respond quickly to clarify any questions. Combined Shipping- We do offer combine shipping. Please wait for an invoice after purchase and we will invoice you at the lowest possible cost for the type shipping specified in our ad. HANDLING TIME: Your order will be shipped within 1 business day after payment is cleared. Returns are accepted ... moreif item is not as described in our ad. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made a mistake in our listing. Concerning calibration of items; no items are calibrated unless otherwise noted. It is expected that the buyer will have the item calibrated if needed. Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern and make you happy. PAYMENT: We accept Paypal. If you do not have a Paypal account. We will accept a company check or cashier's check. Item will be shipped after the check clears our bank. Local pick-up and delivery: Items may be picked-up at our location if desired. Please make arrangements for pick-up in advance. Orders over $75.00 within a 30 mile radius will be delivered. If requested, at no additional charge unless they are over 80 pounds. All purchases must go through eBay. LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold A
|
|
|
Vise, Industrial Swivel Bench Vise Fuller, 4" Wide Jaws Opens to 4-1/2", 24 lbs
For your consideration is a Heavy Duty Industrial Fuller Cast Iron Swivel Bench Vise. Replaceable Jaws open to 4-1/2" Jaws are 4" Wide. Un-Packaged Weight is 24 lbs. 13 oz. This Vise in good used working condition and will be a nice addition to your Tool collection. Please see the picture and email with any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB7-4052 By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
Vintage Columbian 504-M2 Machinist Iron Bench Vise, 4" Jaws, Opens to 7.5" Wide
Buy With Confidence• Professional Service• Great Prices• Fast Shipping• Excellent Feedback Search Our Store Vintage Columbian 504-M2 Machinist Iron Bench Vise. 4" Jaws, Opens to 7.5" Wide. Powered by DESCRIPTION You are purchasing a Vintage Columbian 504-M2 Machinist Iron Bench Vise. 4" Jaws, Opens to 7.5" Wide Excellent Condition! Some wear from regular use No damages Works great The pictures provided were taken of the exact item you will receive. Moments before the listing was written. Please make sure to review the images and ask any questions prior to bidding. Columbian 504-M2 Machinist Bench Vise Features: 4" jaws Opens to 7½" wide(rated at 5" 3 ½" bolts to stablize on bench Heavy duty structure. Measurements: Base measures 8" across. Vise measures 8½" tall. Approximately ... more16" overal length when closed. Made in U.S.A. Do not miss this fabulous opportunity! PAYMENT Pay securely with your account through PayPal! Credit cards are also accepted via call-in. All Pennsylvania residents will be charged 6% sales tax during the checkout process. Anyone picking up an item at our store location will be subject to the 6% sales tax at the time of pick up. All local pickups must be paid in cash( NO PAYPAL) Paypal is not accepted for items picked up at our Storefront Location. Payment must be received within 4 days of the close of auction. If payment isn't received within 4 days. The auction will be revoked and a Non-Paying Bidder alert will be automatically filed. Your winning bid is a legal and binding contract. Thank you for your purchase! For Fastest& Easiest Order Processing Call Us at(215) 361-7845 SHIPPING Packages are usually shipped within 24 hours of payment receipt(excluding Holidays.Saturday& Sunday) DOMESTIC SHIPPING: We charge a packaging fee only to cover our costs of material and labor. The packaging and materials fee for this item is included in the shipping calculator. Note that we use primarily FedEx Ground for all shipments
|
|
|
VINTAGE DESMOND STEPHAN 41S BENCH VISE 4 1/4 REPLACEABLE JAWS & SWIVEL BASE USA
UP FOR AUCTION IS A VINTAGE DESMOND STEPHAN No. 41S BENCH VISE 4 1/4 REPLACEABLE JAWS& SWIVEL BASE. THIS VISE WAS BOUGHT AT AN ESTATE SALE. ALL IT NEEDS IS A GOOD CLEAN UP AND A NEW HOME. PLEASE SEE PICTURES. ANY QUESTIONS PLEASE CONTACT ME BEFORE BIDDING. THANK YOU. THIS VISE IS 17" WHEN FULLY CLOSED AND 8 1/2" HIGH. 45 POUNDS.
|
|
|
Bench Mount Swivel Base Vise 4" Jaws
This listing is for a used swivel base vise. It has 5 1/4" jaw opening and 4" wide jaws. It also features pipe clamps under the jaw. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of ... morethe crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel fr
|
|
|
Columbian Swivel Bench Vise D44 - 4" Jaws w/Anvil
Columbian Swivel Bench Vise D44. With 4" Jaws and Anvil Very nice condition. Recently blasted and sprayed. No chips or cracks. Works like it should. MADE IN U.S.A. ITS MEASURES APPROX: 13"LONG X 7 1/4"HIGH X 6 1/2" WIDE IT OPENS TO OVER 6" WITH THE JAWS BEING 4" WIDE ACROSS THE TOP Check out my feedback rating and bid with confidence SMALL PRINT: Winning bidder to pay actual two day flat rate priority postage of $16.85. Packing and taking parcels to the post office is FREE! No handling charges here. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13eabf4b473-0xf4-
|
|
|
DESMOND SIMPLEX 4" SWIVEL BENCH VISE MODEL NO. 400 (MADE IN USA) JAWS OPEN TO 5"
WHEN BUYING A VISE. DON'T JUST LOOK AT THE NAME BRAND AND MAKE THE MISTAKE I'VE MADE OVER& OVER MANY TIMES IF YOU NEED A STRONG. DURABLE VISE, MAKE SURE IT STATES"MADE IN USA" MOST OF THE MAIN VISE MANUFACTURERS OF QUALITY VISES ALSO SELL THE CHEAP. LOW QUALITY"MADE IN CHINA" VISES(Wilton. Yost, Irwin, Sears Craftsman just to name a few) THIS IS A DESMOND SIMPLEX MODEL 4" SWIVEL BENCH VISE MODEL 400 WITH ANVIL(THIS IS A QUALITY VISE THAT IS MADE IN THE USA) JAWS ARE 4" WIDE JAWS OPEN SAFELY TO 5" vise weight = 24lbs FREE LOCAL PICKUP STEVE 386-308-3908.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13ed724ffa2-0x100-
|
|
|
Wilton 1740 Bullet Bench Vise 4-inch Jaws Swivel Base Made in USA
Hello.This listing is for a Wilton 1740 bench vise as-shown. This is a Made in USA vise,this came with a foil name plate originally that was stick-on and had fallen off over the years,a new one is available through Wilton if you want to replace it. The jaws are 4-inches and wide and open to 5-inch capacity. It also has pipe jaws under the main jaws.However one of the pipe jaw inserts is missing. This is a good solid vise that everything moves freely on. It has been used in a shop environment.Is dirty,and has nicks and dings in it. It is not cracked,broken,and has no prior repairs. NO RESERVE! Please ask ANY questions first. Vise weighs 31-lbs. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please read the following: I am a one-person operation.So please be patient if you do not get a response asap. ... moreI try to get things shipped out within 1-day of receiving cleared payment,at most though 3-days. I will only accept a return if you feel that I did not accurately describe the item. I am not responsible for how long UPS or USPS takes to physically ship the item.Once it leaves my hands I have absolutely no control over how long it takes to get to you. So please do not blame me for problems with UPS or USPS.If you have a problem with them I will try to do my best to help out however I can! Buyer to pay the actual shipping costs using the provided shipping calculator to determine. Will ship within the USA only. Local pick-up is welcomed and is free. Please ask any questions first. Illinois residents must pay 9. 25% sales tax! I will combine shipping. Please let me know if you have any problems with your purchase. I can not solve a problem if you never tell me that there is a problem!
|
|
|
Wilton 4" Jaws 3 3/4" Opening Swivel Base Bench Mount Vise Machinist Nice
Wilton 4" Jaws 3 3/4" Opening Swivel Base Bench Mount Vise Machinist Nice This vise is in nice cosmetic and working condition. Nice vice for the shop. Low Buy it Now Price.
|
|
|
WILTON 3 3/4" Jaws Bench/Toolbox Swivel Vise
Used WILTON 3 3/4" vise USA made. Vise does have some marks,still a good vise see picture I package every item as safety as possible but some things happen so It is up to the BUYER to ask for shipping insurance on your package that will paid by the BUYER. Also it is your obligation to make sure the package is being sent to the right address. If your E Bay and Pay Pal addresses are different I will ship item to the Pay Pal address. I will be glad to answer any questions BEFORE end of auction, Also if you do not see it in the picture PLEASE do not assume it is in the auction and all items are in found condition I do not touch up any items. I will do my best to ship all item on day of clear Payment, Payment must be received within 4 days, Due the large amount of unpaid claim An Automatic Unpaid Claim will Be Opened to Non-paying after 4 ... moreDays, If you Cannot make payment within 4 days please contact me ASAP. Please communicate with me. I do my best to accurately describe my items; and more pictures are always available on request, I have multiple pictures of all my auction for my review and yours and all my Item's are on other web sites so I reserve the right to remove any item that does not have a BID at any time, however, should I miss something or the item just is not what you expected Please contact me before you leave Feedback. Thank you for your understanding. Please view picture or ask any questions prior to bidding
|
|
|
Vintage Wilton C1 Bullet Bench Vise 62-lbs 4.5" Jaws + Pipe Jaws Swivel Base USA
Hello.This listing is for a vintage Wilton C1"bullet" bench vise as-shown. It is in great condition overall,and looks to still be wearing it`s original paint. It weighs 62-lbs and has 4-1/2" wide jaws. There are no cracks,broken pieces,chips,dents,previous repairs,etc. It looks to have led an easy life. The jaw inserts are in great shape,it also has a set of pipe jaws underneath the main jaws. It even still has the rubber stops on the handle. This vise also features a swivel base. Overall a very nice vise that I am almost tempted to keep for myself. NO RESERVE! Please ask ANY questions first! Please keep in mind that shipped weight will be right about 70-lbs.So shipping will not be cheap. Also it will NOT fit in a flat rate box,way too big for that! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... morePlease read the following: I am a one-person operation.So please be patient if you do not get a response asap. I try to get things shipped out within 1-day of receiving cleared payment,at most though 3-days. I will only accept a return if you feel that I did not accurately describe the item. I am not responsible for how long UPS or USPS takes to physically ship the item.Once it leaves my hands I have absolutely no control over how long it takes to get to you. So please do not blame me for problems with UPS or USPS.If you have a problem with them I will try to do my best to help out however I can! Buyer to pay the actual shipping costs using the provided shipping calculator to determine. Will ship within the USA only. Local pick-up is welcomed and is free. Please ask any questions first. Illinois residents must pay 9. 25% sales tax! I will combine shipping. Please let me know if you have any problems with your purchase. I can not solve a problem if you never tell me that there is a problem!
|
|
|
Vintage CRAFTSMAN 3162 Bench Vise 4" Jaws opens to 7" swivel Heavy Duty 55 Lbs
Very heavy duty 55 pound vintage Craftsman 3162 bench vise.smooth working.no issues except for a bend in the swivel lock handle and some paint splats. Shipping to the United States Only Hello and welcome to my listing. Please ask any questions you may have and I'll answer as soon as I can. Questions for auction items ending within 12 hours may not get answered. I take my 100% rating seriously. Ship fast, and want you to be satisfied with your purchase. I appreciate each buyer very much and everyone will receive my full attention and service. I treat people as I would like to be treated and respect your concerns and questions no matter how large or small. After careful packaging, I try to ship your item same or next day payment is received.
|
|
|
STARRETT 014 4" BENCH VISE W/ PIPE JAWS SWIVEL BASE
DESCRIPTION: LIGHTLY USED. STARRETT BENCH VISE. THE JAWS ARE 4" AND OPEN TO 4" IT OPENS AND CLOSES FINE. LOOK AT THE PICTURES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR ... moreLABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC,
|
|
|
Vintage USA Rock Island # 192A Bench Vise 4" Jaws Opens Over 6" Closes Square
Vintage USA Rock Island# 192A Bench Vise 4" Jaws Opens Over 6" Closes Square Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Here is great vise. I bought a steel work bench. This was mounted to it. I have 4 vises already(2 Rock Islands) I just don't need it. I use a Rock Island near identical to this one 10 plus times a day, 7 days a week(not 6) If I need to tell you the quality of a 60 year old Rock Island, you don't need it. They are that good. Period. This one weighs about 32# unboxed. It will be properly boxed and shipped UPS fully insured. 95 percent of our items ship the next day. Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more ... morethan happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
|
|
|
VISE BENCH VISE 4” JAWS SWIVEL KMC FOR PARTS OR FIXING JUNK
VISE BENCH VISE 4” JAWS SWIVEL KMC FOR PARTS OR FIXING JUNK CONDITION: parts or fixing. This is a cheap vise and never was any good. The screw does not open or close the vise. Perhaps it can be fixed or used for some other purpose. Includes the four bolts pictured. SHIPPING: Same or next day
|
|
|
Wilton 101028 4 inch Bullet Machinist Bench Vise USA 7 inch Opening Good Jaws
Wilton 101028 4 inch Bullet Machinist Bench Vise USA 7 inch Opening Good Jaws SPECIFICATION Bullseye Catalog# 33382 4 inch Jaw Width, 7 inch opening, 3-1/4 inch throat depth, Dust Cap Missing on end, Weight: 42 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by ... moreappointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would l
|
|
|
Wilton 450 4 1/2 inch Jaws Machinist Blacksmith Bullet Bench Vise USA
Wilton 450 4 1/2 inch Jaws Machinist Blacksmith Bullet Bench Vise USA SPECIFICATION Bullseye Catalog# 33383 4-1/2 inch Jaws, 7-1/2 inch jaw Opening, 4 inch throat depth, Jaws in good condition, Excellent working condition, Weight: 61 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed ... morein our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or ass
|
|
|
Wilton Bullet Swivel Base Machinist Bench Vise 4.5" Jaws 4 1/2" USA Vintage
Wilton Bullet Swivel Vise click picture to enlarge Vintage Wilton Bullet Swivel Vise 4.5” Wide Jaws Max Opening over 8” Swivel Base is a 4 bolt Mount 1 base mount is broken off T-handle is slightly bent Vise Opens and Closes Easily as it Should Length with Jaws closed is about 17" Long Made in the U.S.A. Schiller Park. IL Local Pickup can be arraigned Once cleaned it will be a great addition to the shop. Please see pictures for condition. for more great items! click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click ... morepicture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge We require payment arrangements to be made within two days after the auction has ended or the auction will be void. And an eBay non-paying bidder report will be filed. Orders are processed within two business days after payment is received. Buyer is responsible for all shipping and insurance charges. The buyer is responsible for the package while it is in transit. Please insure items that can be easily damaged. We pride ourselves on quality of the items sold. We pack and ship our items professionally to ensure each item you buy from us arrives safely and in the listed condition. Return Policy All sales are final. All items are sold as is. What you see is what you get if it is not listed or pictured it is not included. If you have questions please ask them before bidding. We pay the highest attention in ensuring that listings are accurate and reflect the quality and condition of the item. We will only consider a return if an item is clearly misrepresented in the listings(minus shipping and handling) We are more than willing to try to resolve any issues that may a
|
|
|
WILTON 4" HD, BENCH BULLET VISE, EXCELLENT JAWS
CONDITION; USED. GOOD WORKING CONDITION WITH THE USUAL DENTS, DINGS,CUTS ETC. OF A USED VISE. NEEDS CLEANED AND PAINTED, DO THIS AND SAVE $$. NOTE* IT HAS WHAT APPEARS TO BE NEAR NEW JAWS. WILTON 4" HEAVY DUTY. BENCH VISE, MODEL 4670, 8" JAW OPENING. MADE IN USA. LOOK AND BID WITH CONFIDENCE. MY GOAL IS TO MAKE EVERY SALE A POSITIVE ONE. FEEL FREE TO ASK QUESTIONS AND THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WILTON CADET 9140 Swivel Bullet Bench Vise 4" Jaws Schiller Park, ILL 1962
This is a WILTON CADET 9140 Swivel Bullet Bench(Machinist) Vise with 4" Jaws made at the Schiller Park. ILL USA plant in 1962. There is plenty of wear on the jaws. But they still do their job; and that does not effect the mechanics of the vise at all. Just a few words of how I refurbished the vise. Gave it a bath in solvent. Then very hot water. Dried it with compressed air. Then, glass beaded every piece of it right down to bare metal. Polished up the bare machined surfaces. And taped them off. Shot the casting with Rustolium Hammered Light Blue. Greased all moving parts. And removing the excess lube. Did it- so you don't have to. This vise will most likely be around for your grandkids! I do not issue refunds or accept returns. You are purchasing a used vise that has been restored to a useable- not perfect condition. And is being ... moresold"as is" Please make payment within two days of auction end. Thank you!
|
|
|
Ohio Forge 4" Mechanic's Swivel Bench Vise 21lbs Flat Anvil Pipe Jaws
Ohio Forge 4" Mechanics Swivel Bench Vise Ohio Forge 4" Mechanic's Swivel Bench Vise This auction is for an Ohio Forge Mechanic's Swivel Base Bench Vise. The vise weighs 21.5 lbs. before packaging. It has removable 4" jaws. It also has built-in pipe jaw. It is in excellent condition as shown. The vise measures about 13" overall length when closed. The jaws open to about 4 3/4- 5" it has a black crinkle paint finish. It has a 3 1/2" by 3 1/4" flat anvil surface. See additional pictures below. I am shipping in the USA only at this time.
|
|
|
RESTORED Wilton Bullet Swivel Bench Vise 4" Jaws 50 lbs.1971 Made in USA vice
This is the last vise you'll ever buy. Unless you want more than one of course. This old vise is a real beauty. Big and heavy too. That is no small tree stump it's resting on. It wasn't this pretty when I got it. It had sat in a garage for who knows how long. It had about a 1/8" of house paint and crud all over it. It was just begging to be brought back to life. I cleaned it up as much as I could with soap and water and then media blasted it down to bare metal along with some wire brushing. It was completely disassembled. Everything that is removable was removed. After some time in the solvent tank, clean and apart, I could give it a thorough inspection. I was happy to find that the metal is still in fantastic condition. No cracks, no welds and no repairs. That's what you want. You can see it all stripped down in the ... morelast photo. After every piece was completely cleaned and prepped I was able to begin the refinishing. I chose Italian Olive for the color and applied a baked on enamel finish. It should hold up very well. The vise is quite handsome in person. None of these photos capture the color well in my opinion, it's more attractive when you see it. You'll also be stunned at its size and weight the first time you handle it. All of the moving mechanisms and friction surfaces have been freshly lubed with blue, synthetic grease. This vise is ready for decades of hard work. The action is simply fantastic on it. Your eyebrows will lift the first time you screw it in and out. I promise. It's hard to believe how well vises were made back in the day after getting used to the junk sold today in big-box stores. This vise has smooth face jaws and they are in nice shape. You won't need to change them for a very long time. However, a couple of the jaw screws are kind of bunged up where the Phillips screwdriver goes in. It's no problem, the jaws are in tight and the screws aren't going anywhere. However, the next time, maybe 30 years from now, when you change jaws out it might be a
|
|
|
WILTON 4 INCH BENCH VISE WITH SWIVEL BASE AND PIPE JAWS MADE IN U.S.A.
Very good used Wilton 4" bench vise with pipe jaws(cast into the jaws) and swivel base. This vise has been cleaned and painted. But I made no attempt to dress up the scars it has received from use. The screw(last picture) was in great condition, I simply cleaned the threaded portion with degreaser. Also noteworthy is the screw handle, it is straight and doesn't appear to have ever been straightened. You can operate this vise with one finger. The replaceable jaw faces do show noticeable scarring, but they are usable. The jaws don't close perfectly, but they close tight enough for all but the finest work. As stated the jaw width is 4 inches. On the casting it reads maximum opening 5 1/2 inches, but 4 3/8 inches is the maximum opening with full screw engagement. This is a very good old vise that can give you a lifetime of service ... moreif used properly. It is a high quality U.S. made tool that weighs just under 30 pounds prior to packaging. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-1402bb2dd12-0xf8-
|
|
|
1982 Duracraft 4½" Jaws Swivel Anvil Bench Mount Vise MV-440 Wilton Knock Off
This vise was manufactured by DURACRAFT and is obviously intended to be a Wilton knockoff. Although it's not as good a brand as a Wilton it also won't be as expensive as one and still. It actually feels like a really good vise. The action is smooth, no snags in the main screw at all. One finger easy spin out and one finger easy spin in. It's ready to work, I saw no structural damage anywhere, just the usual surface blemishes from a working tool that you can see in the photos. There's no owner markings. Condition issues: Scratches. Gouges, rust from handling, storage, use. See pics for details. POSITIVE FEEDBACK IS ALWAYS APPRECIATED AND PROMPTLY RETURNED! Check out my! BEFORE you“BUY IT NOW” PLEASE: Read my item description very carefully. Always feel free to ask any questions before buying. Look at the pictures carefully ... moreas they are part of the description. This item is currently being stored in a smoke free facility. If you need additional pictures. Please ask. We certainly don't mind sending more. Please email me through eBay with questions or if you need a specific picture. I am happy to reply to any requests. I think I can also now email pictures through eBay. We are not always the experts on all the items that we sell however. We do try to make every effort to review the condition of each item and report to you what we see. Items are being sold as is. All items are shipped via USPS. UPS, or FEDEX to the lower 48 states. All customers will be issued a tracking number or USPS Delivery Confirmation number upon shipment. Most of our orders ship within 1 business day after payment has cleared. We are not responsible for carrier transit time. We do not ship during weekends or holidays. If you live somewhere else other than the 48 United States. We are sorry, but it's going to cost you more for shipping. We do ship fast and we do ship worldwide. If you purchase more than one item from us at the same time, we will do everything we can in our ability to make sure they are packed together to s
|
|
|
Vintage Wilton Bullet Bench Table Vise Tool 4 1/2" Jaws
Estate Find. A Wilton machinists stationary vise with 4 1/2" jaws. It weighs 35# The jaw plates look to have been brazed on the top and sides.The vise opens and shuts well. Please look at photos and feel free to ask any questions. Insurance is included in shipping and handling charges as per eBay rule. PayPal only. Payment is expected in 3 days. Items are described with any flaws noted. If you have questions please ask within 3 hours of the close of the auction in order to give me a chance to respond. I am always happy to combine shipping on multiple purchases when possible. Some items are not eligible for combined shipping due to incompatible size and/or weight. If you donot like the shipping time or charges PLEASE DO NOT BID.I strive to give good service and the shipping and insurance charges are out of my control and I do not want ... morecomplaints about this after the close of auction. That is not fair.NO SHIPPING TO RUSSIA OR SPAIN-
|
|
|
NICE Wilton 4" BENCH Vise 1644 644 w anvil & Swivel Base pipe Jaws OPEN TO 5.25
NICE Wilton 4" BENCH Vise 1644 644 w anvil& Swivel Base pipe Jaws OPEN TO 5.25 Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description This Wilton vise with anvil base is in very good clean condition. Most of the original paint is intact. The 4 inch wide jaws open to 5 plus inches and have built in pipe clamps. This vise has a 4 point mount swivel base. Marked on right side 2 110003 on front jaw and 1 111037 on the rear jaw(see picture) Left side is marked 644 on front jaw and 1644 on rear jaw(see picture) Made in Schiller Park. ILL USA. Lots of years left in this vise. Shipping and Handling: Winning bidder will pay actual shipping and handling via insured USPS priority mail or FedEx Ground. In the United States a ll items over 3 l bs are shipped via ... moreinsured FedEx Ground. We use Ebay's shipping calculator to determine shipping and handling charges. However Ebay does not provide a shipping calculator for FedEx so we use the rate provided by E bay's UPS Ground calculator to determine our shipping charge for FedEx Ground shipments. All international packages are shipped via USPS o r UPS. OUR AUCTION TERMS: We are not the original purchaser of this item and we do not claim to possess any rights or guarantees that the original purchaser may have claimed from the original seller's or manufacturer's guarantees. Listing the features of a item does not mean those features were tested. If it does not say it works that feature has not been tested. Email-ASK. All items ship as photographed. If you do not see it in the picture it does not come with it unless otherwise stated in the auction. In lieu of return we reserve the right to have the item repaired at our expense in your area. We do our best to describe cosmetic damage in the auction description and photographs. But missed nicks. Dings and scratches are common with used items and are not covered by our return policy unless the item is represented as new or mint. Pa
|
|
|
Antique Vtg ATHOL Heavy Duty Bench Vise 4"Jaws 6"+Open Machinist Blacksmith Tool
Excellent Antique and/or Vintage Athol Machine Co. or A.M. Co. pre L.S. Starrett Heavy Duty Bench Vise with 4" Jaws that opens and clamps to well over 6" in nice working condition. But could use a good cleaning This terrific and early Athol Massachusetts made bench vise is incredibly heavy duty for it's size and is a wonderful find for collectors. Mechanics, machinists, and blacksmiths too. Made far superior to the vises on the market today Please check the pictures carefully for the exact age and condition Thank you for looking and Insured Priority Mail Shipping is Free in the U.S.A.
|
|
|
Vintage Wilton Cadet 9140 Swivel Bullet Bench Vise 4" Jaws 1956 machinist
Antique Wilton Cadet model 9140 bullet vise. The manufacture date on the drift key is 11-30-56. The vise jaws are 4" wide and open to approximately 5 1/2" The vise is in good operational condition. But at one time someone must have beat on something so hard that it broke off part of the base under the jaw on the fixed side and roughed up the top behind the jaw(see photos) When I got it the fixed jaw was missing. I made a replacement jaw out of mild steel and it works fine. I had to re-tap the screw threads so the screws are different sizes on the 2 jaws. The missing part of the jaw base does not affect clamping strength. It would only be a factor if you wanted to clamp a part in it and beat it with a sledge hammer. The screw is in good shape and turns very smoothly. This would be great candidate for restoration or it will function ... moregreat for years to come just as it is. The fixed jaw base could be built back up with weld or simply left alone. Overall a very good vise and would be beautiful restored. Note: Shipping is to lower 48 states only. The base plate and screw may be dissasembled so that it will fit into a flat rate box.
|
|
|
Vise, Industrial Swivel Bench Vise Fuller, 4" Wide Jaws Opens to 4" Anvil Japan
Vise. Industrial Swivel Bench Vise Fuller, 4" Wide Jaws Opens to 4 Inch Anvil Made in Japan Used but in good condition- opens& swivels nicely Litte rust- Weighs almost 16 pounds Shipping: Medium Flat Rate Box $11.30.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141536d0df7-0xfd-
|
|
|
27lb.Wilton Machinist Bench Vise,Swivel Base,Pipe Clamps,Anvil,4-1/2" Jaws
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! 27lb.Wilton Machinist Bench Vise.Swivel Base,Pipe Clamps,Anvil,4-1/2" Jaws, Click to View Image Album 27 pound Wilton machinist bench vise.Swivel base.Pipe jaws.Anvil.4-1/2" jaws.Marked 654 4"No damage or repairs.No reserve.Email with any questions and thanks for looking! Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: USPS Parcel Post® UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE ... morecounters from Vendio today!
|
|
|
Vintage Craftsman Anvil Swivel Bench Vise 4" Jaws with Pipe Jaws 391-51201
Vintage Craftsman Anvil Swivel Bench Vise 4" Jaws with Pipe Jaws No 391-51201 It has a Swivel Base with 3 Mounting holes. It also has an Anvil and Pipe Jaws*This Vise Looks and Works Great* Vise Jaw Dimensions: 4" wide and it opens approx. 5 1/2" Measures approx. 15 1/2" Long closed x 8 1/4" High and weighs just over 26 pounds. Still has its original paint. Shows normal wear from normal use and looks Great still. You will not be disappointed in this vise Please check out all the pictures before bidding to see the condition for yourself. Great item. Bid with confidence! If You Have Any Questions Please Feel Free To Ask Be Sure To Check Out My Other Auctions Thank You For Looking and Happy Bidding Shipping: USPS Shipping with Tracking Number Sorry No International Orders Payment: I Only Accept Payment By PayPal Payment ... moreIs Required and Appreciated within 72 Hours
|
|
|
Littlestown 4.25" Jaws No. 400 Swivel Mount Bench Vise 24 Lbs Made in USA Vice
This vise was manufactured by Littlestown but sorry to say I have no idea when. I imagine it's fairly old. It cleaned up decently and will be a good working tool for somebody. It's actually bigger than you think. Do not expect a tiny vise even though other vises of this style are a notch or two down in size. This is not a small one. It looks decent and works perfectly fine, there are no issues with the mechanics on it. However, not all is perfect in Littlestown. If you look at the photos you can see a chunk of iron fell out underneath the dynamic(Front. jaw. This happens when somebody strikes downward with either too large a hammer or too much force. It's not uncommon to see this damage on vises. It could have easily happened decades ago. It genuinely has no bearing on the vise's performance, most of the jaw shelf is still ... morepresent and the jaw remains perfectly solid in place. Try not to smash it with your 5 pound sledge though. I did do a thorough cleaning on this with some fresh. Baked on enamel. The color is a deep, metallic green and it looks nice with a touch of sparkle. It's ready to go to work for you and I see no reason it won't last many, many years. Specs and dimensions as follows; Littlestown Bench Mount Swivel Vise Model No. 400 Manufactured in New York NY. USA Weight: 24 Pounds Jaw width: 4 1/2" Opens to: 6" Honestly. Do yourself a favor and keep that at 5" to 5 1/2" just to be safe please. Throat Depth: 2 3/4" Length: 13" Height: 7" Take a look at all the large photos and let me know if you have any questions. It will be packaged very safely so it arrives in the exact condition you see in the photos. I've never had an item damaged in transit and fully intend for that trend to continue. The auction is 7 days. Starts at $0.99 and has No Reserve. Payment is by PayPal only. I ship out fast with tracking. Payment requested within 3 days of auction end. If you need longer just contact me and let me know. If you have zero, negative or no recent
|
|
|
BIG Columbian 2040 Bench Vise - 4" Jaws - 14 inches long Closed - 8 Inches Tall
Nice old Columbian bench vise. Has a working swivel base. Has 4" jaws. 14 inches long when closed. Weighs 27.4 pounds. Works fine. Normal use wear. There is a bit of white paint around the bottom. Use pictures to evaluate.
|
|
|
Wilton Heavy Duty 4" Serrated Jaws Bullet Bench Vise - Machinist 44 lb
Wilton Heavy Duty 4" Removable Serrated Jaws Bullet Bench Vise- Machinist 44 lbs. Made in U.S.A. Vise has seen Very light use-1-1980 Dynamic jaw is stamped 101158-Static jaw is stamped 101157 New Paint Has some chips on the base around the edge Note: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately.
|
|
|
Vintage Simplex 47lb Bench Table Vise Tool Jaws 4 1/4 in wide Opens 8 1/2 in
Here we have a Vintage Simplex 47lb(about) Bench or Table Vise. The Jaws are about 4 1/4 in wide and opens about 8 1/2 in. It's used and has some slight rusting and paint damage but it works well and you can choose to clean it up and make it shine if you desire. It's a heavy work horse and will get the job done. If you have any questions feel free to ask!
|
|
|
Wilton No, 101028 4" Serrated Jaws Bullet Bench Vise - Machinist
Up for bid is this used but in nice condition a WILTON 101028 bullet vise. This vise is made by the WILTON SCHILLER PK ILL. U.S.A. This vise is No.101028 and has a 4" Heavy Duty Serrated Jaws which are in excellent condition. This vise has some paint spots and some loss of original paint but could be repainted if you choose to. The vise has 2- 1/2" holes for mounting to your work bench and it can be yours for our buy it now price or we will entertain reasonable offers. TY
|
|
|
WILTON CADET 9140 Swivel Bullet Bench Vise 4" Jaws Schiller Park, ILL 1960
Wilton vise lightly used. Some rusting but was brushed and auto primer painted. Ready to go to work mounted on your bench. Shipping to lower 48 states ONLY. See our other Auctions for more great STUFF. Payment must be made within 3 days of Auctions ending unless arrangements have been made with us. Posted with
|
|
|
4" Steel Bench Work Table Shop Machinist Vise 8" Opening 4" Jaws
Check out our eBay store BULLSEYE INDUSTRIAL SALES 4" Steel Bench Work Table Shop Machinist Vise 8" Opening 4" Jaws SPECIFICATIONS Bullseye Catalog# 37641 Weight: 31 lb 0 oz, CONTACT INFO Contact us Monday- Friday 6am-3:30pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect ... morean item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO
|
|
|
Massey 23 Wood Bench End Vise 7-3/4" Wide Jaws USA
Up for sale here is a Massey 23 Wood Bench End Vise 7-3/4" Wide Jaws USA. Jaws open 8" Made in USA. Feel free to ask any questions. JAW006;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14201c22ebf-0x105-
|
|
|
Wilton bench vise with 10 cm (4") jaws; red delicious!
Wilton vise in a lovely and largely perceptible red. This vise is generally in good condition- there is only light oxidation and the worm drive is smooth. The only significant flaw is a jaw that needs replacement. Jaw width is 100mm(3.94" Opening is 95mm(3.74" though of course it can go a bit more.
|
|
|
Vintage American Scale Co. No 40 Bench Mount Swivel Vise Anvil 4" Jaws USA Made
Neet old used vise with wear from use evident. Has 4" jaws& opens up to 4" Please look at photos& feel free to ask questions. Thanks for looking
|
|
|
RESTORED: Vintage 1950's Wilton Shop King Bench Swivel Vise 4" Jaws Made In USA
I have no idea why they don't put effort into design these days like they used to. Just look how cool this thing is. It has such great character. I'm glad I found it because it was destined to be scrapped. I just couldn't let that happen. The vise was absolutely filthy when I got it, covered in pretty much everything you can imagine. This Shop King needed help. Wilton made Shop King vises for a brief period in the early 1950's right before moving from Chicago to Schiller Park IL. They didn't make them long and the line was discontinued after the move. This is a 4" model. No. 14. It's very large for a 4" vise, one of the biggest four inch vises I've seen. Wilton wasn't messing around. But it's the unique look that get people going over these old Kings, the classic 50's school of design. It ... moreswivels about 200 ° and opens to four inches. Maybe a little farther if you need the extra bit. This one was quite an undertaking to bring back into service. The first thing I did was give it a good bath. It was filthy and I got filthy cleaning it. After a couple hours of cleaning and degreasing it was to a point where the restoration could begin. There isn't much nice to say about the little remaining paint and it obviously needed to be stripped to bare metal. After I got it stripped down I was relieved to see a pretty solid vise that could end up nice. I looked it over and there is a crack. It's small and on the underside of the dynamic jaw. There's a photo at the end of the listing text so you can see it. The crack has been there a long time and thankfully it's small. I don't see anything wrong with having this crack. Everything remains completely solid in my inspection so I don't, at all, expect this to cause any issues down the road. Of course if you abuse the vise then all bets are off. At this point I applied three coats of enamel. The bottom half is Racing Green Metallic and the top half is Classic Grey. I baked the paint for an hour and I bel
|
|
|
YOST BENCH VISE/ SWIVEL ANVIL PIPE VISE NO. 43 1/2N 3 3/4" JAWS
This is in good shape. Everything moves freely. A nice item Since I am not an expert. I may not describe this totally correct. So please ask all the questions now before you bid.I have no problem going into detail on questions asked. Since there is no returns. I write what the product has written on it. But is up to you to make sure what you are buying as there is no returns. 1. MAKE SURE YOUR ADDRESS IS CORRECT ON EBAY AND PAYPAL. If the address is not correct. This is on you. I just had a transaction with a wrong address. After first shipping cost, you will need to pay a second shipping cost of the full shipping price. Priority mail will return free back to me, Parcel post will not. That would mean you have to pay first shipping, return to me and shipping back. SO MAKE SURE! 2. LOCAL PICK UP IS ALWAYS AN OPTION. 3. I do Priority regular, ... morePriority flat rate and parcel post for the most part. Sometimes parcel is cheaper than flat rate. UNLESS STATED LOCAL PICKUP ONLY. 4. It is up to you if you want shipping insurance. I encourage you to purchase it, since I do not control the shipping services. And not responsible for the treatment they might give a package. I package everything very well. I ship world wide, unless not offered on certain item. 5. Everything I sell seems to work. I try to include all I See or Know about this item. I will send you more pictures if you want them, Just ask. Make sure you send me your e-mail. 6. PLEASE ASK ALL QUESTIONS BEFORE YOU BUY! 7. ON all ELECTRONIC items, I only see if they turn on. Most items I do not have the ability to test. Or if there is a way to test them I will if you ask. I encourage you to buy insurance on these items. I will not be responsible for mishandling in the mail. 8. There is No Refunds or No Returns. It is up to you to contact me within 3 days of end of auction, I shipped with in 3 days of payment
|
|
|
Later WILTON Bench VISE 4 1/2"JAWS MACHINIST SMOOTH OPERATOR SWIVEL
Has swivel base as shown and pipe jaws. Jaws are 4 1/2" wide and opens to 4 1/2"and close tight! Smooth operator.
|
|
|
Old Vise ~ Reed No. 104 R HEAVY DUTY 40 lb. Bench Vise SOLID Reed Vise 4" Jaws
You are bidding on an old vise. This appears to be a Solid Heavy Duty Vise. It weighs approx. 40 pounds. The side is embossed No. 104 R ~ Made By REED Mfg. Co. ~ Erie Pa. U.S.A. ~ Pat. No. 2127008. It has approx. 4" wide jaws. It has an approx. 11 3/4" handle. It opens approx. 8" The base measures approx. 7" by 7 1/4" at its widest points. The mounting holes measure approx. 3/4" round. Closed vise measurements are approx. 15 1/2" long by 7 1/2" tall. The jaws open and close super easy with one finger ease until the last inch. The bar that sits around the threaded bar. That opens and closes it, measures approx. 1 7/8" wide by 3" tall. This bar appears solid but has chunks out of it below the jaw area. It looks like a big drill bit has been bored into it multiple times. Both jaws also appear ... moresolid but both show wear and/or imperfections and/or defects. The vise also shows weld markings and/or weld splatter. The weld residue doesn't appear to be weld repair.This vise is in well used as found condition. I took 12 pictures for you to"ZOOM" and form your own opinion on the condition this old vise is in. Pictures are an integral part of my description. Please refer to pictures for added description. My goal is to honestly describe my items. To the best of my ability. If you feel that I have made a mistake and misidentified an item then please enlighten me! If you have any questions, feel free to ask and I will promptly reply. I have other Vises& Tools plus Starrett& Other Quality Machinist Toolmaker's Assorted Items listed with reasonable starting prices and no reserve. Several of these items were used by and/or are hand scribed USAAF so I assume them to have been well taken care of. This particular Item is scribed with the name vetter. I welcome you to view my other Auctions by clicking on See other items Thank you for looking and especially for bidding. I will mail your package as soon as I receive payment. If you have no intentions of paying
|
|
|
Chas Parker 974 Swivel Base Bench Vise 4" Jaws 6" Opening USA
BID WITH CONFIDENCE-I HAVE 100% FEEDBACK THIS WAS MY GRANDFATHERS VISE. IT IS IN GREAT CONDITION. IT ALSO INCLUDES THE ORIGINAL VISE WRENCH.
|
|
|
SIMPLEX #43S SWIVEL BENCH VISE 4 3/4" JAWS/65 lbs Desmond Stephen Mfg. VINTAGE
large Simplex no. 43S Machinists Swivel Bench Vise-4 3/4 in. wide jaws-5/8 in. handle bar width-19 in. length overall-weight about 65 pounds-manufactured by Desmond Stephen of Urbana. Ohio-one nice vise. Please scroll down the page for additional photos. This has some wear: moderate soiling/light rust/some scratching and nicking from use/the jaw faces are somewhat worn down/the pin behind the inner bolt mechanism could use replacing eventually: it has worn down and is propped up with a smaller pin under it. Each week we post a number of interesting items that have been purchased from Oregon Estate Sales-shipping can be recalculated and combined with multiple purchases-please let me do the calculating for combined shipments before paying. Thank you for visiting our site. Free Local pick-up is an option. Out-of-country buyers are welcome. But ... moreoverseas shipping is more. Please let me do the shipping calculation for combined orders before paying. We accept Paypal or if you choose to pick up your item other payment arrangements can be made. International buyers must use Paypal. Returns offered ONLY if the buyer contacts me within 14 days of receiving item. And ONLY for unstated problems with condition, significantly incorrect vintage, or in the case in which I unwittingly sell a reproduction item. Moneys returned include the price paid for the item and original shipping. The design& text portion of this listing is the I.P. Intellectual Property) of Timewarp Antiques& Collectibles. Protected by the Digital Millennium Copyright Act, 17 U.S.C. Section 512 ©(3)A) and enforced by the eBay Customer Service Trading Community. Regretably bidders with less than 20 Feedback Points may have their bids canceled unless they contact me first Powered by Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MORGAN VISE BENCH VISE SWIVEL BASE 4 1/2 JAWS MORGAN MILWAUKEE VISE
MORGAN BENCH VISE ON SWIVEL BASE- 4 1/2 JAWS- OPENS AND CLOSES SMOOTH AND EASY- GOOD CONDITION- LOCAL P/U ONLY NO SHIPPING THIS ITEM- THANK YOU.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1440c5ffad3-0xf7-
|
|
|
COLUMBIAN VISE SWIVEL BASE ON STAND BENCH VISE PORTABLE TRIPOD STAND 4 1/2 JAWS
COLUMBIAN VISE 4 1/2 JAWS SWIVEL BASE ON STAND- GOOD CONDITION- OPEN'S AND CLOSE'S SMOOTH AND EASY- LOCAL PICK UP ONLY- NO SHIPPING- EMAIL OR 818-231-7765 FOR APPOINTMENT TO LOOK AT BEFORE BIDDING- CA. SALES TAX 9% THANK YOU
|
|
|
STARRETT VISE SWIVEL BASE ATHOL BENCH VISE PORTABLE TRIPOD STAND 4 1/2 JAWS
ATHOL STARRETT VISE 4 1/2 JAWS SWIVEL BASE ON STAND- GOOD CONDITION- OPEN'S AND CLOSE'S SMOOTH AND EASY- LOCAL PICK UP ONLY- NO SHIPPING- EMAIL OR 818-231-7765 FOR APPOINTMENT TO LOOK AT BEFORE BIDDING- CA. SALES TAX 9% THANK YOU
|
|
|
Wilton 1644 Mechanics Bench Vise, 4" jaws and Swivel Base, Great Condition
Up for sale is a refurbished Wilton 1644 Mechanics medium duty bench vise. The vise was prepped and shot with a new coat of Wilton hammer tone blue paint and all of the bare steel parts were cleaned and polished. The jaw insert hardware was really chewed up so i turned down some replacement screws so they are exactly like the originals. The vise has 4" jaws with a throat depth of 3 ⅜" The max opening is 5 ½" but that could be stretched another ½" if needed. The vise weighs about 27lbs and has a large. Resurfaced anvil/striking area that measures 3 ¼" x 2 ⅝"
|
|
|
Fuller Bench Vise, 4" Wide Jaws Opens to 4-1/2" Tool
This is a Fuller Bench Vise. It is used but in working condition. It is 4" will open to 4 1/2"
|
|
|
NICE WILTON 4-1/2" BULLET SWIVEL BENCH VISE w/ PIPE JAWS, SCHILLER PARK, IL
TO ARNDTINC! WE ARE SELLERS WHO HAVE STARTED ANOTHER USERNAME TO SELL PARTICULAR ITEMS. OUR OTHER USERNAMES ARE"SKYNON" 1TO4" WE HAVE A COMBINED TOTAL OF OVER 30.000 POSITIVE FEEDBACKS, SO PLEASE BID ON OUR ITEMS WITH CONFIDENCE! THIS IS A PREVIOUSLY USED BENCH VISE BY WILTON SCHILLER PARK. IL, USA BULLET DESIGN BENCH VISE SWIVEL BASE 4-1/2" WIDE JAWS HAS STRAIGHT JAWS AS WELL AS PIPE JAWS QUALITY MADE TOOL THAT WORKS JUST GREAT! HAS WEAR FROM NORMAL USEAGE.HAS NOT BEEN ABUSED.NOTHING BROKEN OR MISSING
|
|
|
CARDINAL MACHINE CO 4AV QUICK ADJUST VISE 4" WIDE JAWS AIR BENCH VISE 19 LB.
Up For sale a good working CARDINAL MACHINE CO. GLENDALE CA. 4AV QUICK ADJUST VISE 4" WIDE JAWS AIR BENCH VISE 19 LB. Note: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately.
|
|
|
ROCK ISLAND VISE SWIVEL BASE 4 1/2 JAWS ROCK ISLAND BENCH VISE MADE IN USA
ROCK ISLAND BENCH VISE SWIVEL BASE 4 1/2 JAWS- OPEN'S AND CLOSE'S SMOOTH AND EASY NO CRACK'S OR WELD'S- SELLING VISE ONLY- LOCAL P/U ONLY NO SHIPPING- CA. TAX 9% 818-231-7765 THANK YOU
|
|
|
Wilton 101158 Bench Vise 4" Jaws Heavy Duty US Made
Used Wilton Heavy Duty Bench(4 inch jaws) vise in excellent working condition. Nice jaws. weighs about 65 lbs. No refunds or exchanges
|
|
|
MILLING MACHINE BENCH VISE JAWS 8 1/4" L x4 1/4" W x 1 3/4" set of 2
offered: not aluminum- magnet sticks to them 2 used. But good condition vise jaws\ approx measure 8 1/4L x 4 1/4" W x 1 3/4" they weigh over 13 pounds a piece shipping $11.00 anytown usa
|
|
|
Heavy Duty Bench Mount Shop Vise 4-1/2" Jaws 6" Opening 3-1/4" Throat Depth
Heavy Duty Bench Mount Shop Vise 4-1/2" Jaws 6" Opening 3-1/4" Throat Depth SPECIFICATION Bullseye Catalog# 43057 Used bench vise in good condition. 18" overall length. 8" height. Weight: 47 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse ... moreby appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would lik
|
|
|
Swivel Base Bench Mount Shop Vise 6" Jaws 8" Opening 4" Throat Depth
Swivel Base Bench Mount Shop Vise 6" Jaws 8" Opening 4" Throat Depth SPECIFICATION Bullseye Catalog# 43055 Weight: 63 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect ... morean item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO
|
|
|
COLE BENCH VISE CLOE VISE MADE IN USA 3 1/4 JAWS ROTATING JAWS
COLE VISE 3 1/4 JAWS ROTATING JAWS- OPEN'S AND CLOSE'S SMOOTH AND EASY NO CRACK'S OR WELD'S- EXCELLENT CONDITION- LOCAL P/U ONLY NO SHIPPING- CA. TAX 9% 818-231-7765 THANK YOU
|
|
|
Vintage # 604 Columbian Bench Vise 4" jaws hand tools oil field machinist
Up for bid: Vintage Columbian Bench Vise as follows: 604 The vise is 16 3/4" long. 9" tall, and 9" wide at the widest part of the swivel base. The jaws are 4" wide and open 8. Comes with the swivel base. Opens and closes with ease. Weight is about 43 lbs. Nice condition with normal wear. Please note: UPS does not deliver to post office boxes-will need to be delivered to a physical address. UPS also likes to have a contact phone number. Please contact me if you have any questions. Click here to check out my other items. Please add me to your favorites list! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14578fac108-0x105-
|
|
|
Parker Number 32 VISE VICE Machinist Bench 3 1/4" wide jaws
Parker Number 32 VISE VICE Machinist Bench 3 1/4" wide jaws This would be a very nice vise to restore. Collect. There is some scaring on the sides and top of the jaws from sawing. There are small nicks and dings as can be seen in the pictures. One jaw near the bottom looks different from the other(not as tall) I am not sure if it was made this way or it is worn. The screw and nut are in nice shape. There are no breaks. Cracks, or repairs. No welds. It is 14" long. 6 1/4" wide, 6 1/4" high. I think 4 1/4" would be the max this vise could clamp. It will open farther. Weighs 20 lbs. This vise will come shipped disassembled so it can fit into the large USPS flat rate box. It will be double boxed and All pieces will be secured so if the box tears. No pieces will be lost. Scroll Down to see All Pictures What you see in ... morethe pictures is what is up for auction. I will combine winning auctions to save you $$$ on shipping. I do not overcharge on shipping. You will not be disappointed. Please check the pics Please ask me and I will try and answer any of your questions Please check my other auctions. Bid now because you do not want to miss this deal. Good Luck and check my other auctions. I only charge Actual costs for shipping. Please check my Excellent Rating. Buy with confidence. If you have questions. Please email me. If you have questions. Please email me. High Bidder to pay shipping and insurance if you want it. Please allow time for personal check to clear or send M.O. for quick shipping. Just a note to all my bidders: I really try to give an accurate description and offer you great items. But, sometimes our interpretation of Excellent or Very Good differ. So, I really suggest you email me with your questions. to make sure we are all on the same page. But, once in a while, someone simply would like a refund. No Problem, I absolutely guarantee my items and you always may have 5 days after you get your item to email me for a refund. But, I want to let you know before you bid, I deduct from your r
|
|
|
Vintage Chas Parker No. 974 1/2" Swivel Base Bench Vise 4 1/2" Wide jaws USA
Vintage old vise early 1900's. I remember this on our Dads work bench since I was born in 1953 and it was used and old back then. Please use the photos for the condition. I know it all works and must weigh 70 pounds. LOCAL PICK UP ONLY. THERE ARE NO CRACKS OR PLACES WHERE THE VISE HAS BEEN WELDED OR REPAIRED THAT I CAN SEE. Thanks for looking and good luck with all your bids on E-Bay. Payment by Pay Pal only- payment must be made before pick up. Thank you for looking! 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-146b08c2e24-0x10f-
|
|
|
VINTAGE WILTON 9400 MACHINISTS BULLET BENCH VISE 4" JAWS 360% SWIVEL BASE
Vise has minor surface rust. It works great though. A little rustoleum and this vise will look like new. See shipping details and put in your zip code for pricing.
|
|
|
Antique/Vintage WILTON BULLET Machinist Bench Vise 4" Brass Jaws HD #4670 101028
Antique/ Vintage WILTON BULLET Machinist Bench Vise Brass Jaws#4670 HD 101027-28. Wilton Schiller PK. Ill. U.S.A. Good used condition. Great addition to your workshop. Great vise. Turns and tightens well. Please see all pictures for the best description, and thanks for looking! Please see my store for all kinds of vintage and unique items. Something for everyone. Items: All items I like to call treasures. I go in search of these items at any sale I can find. All items are used, pre-owned, pre-loved, or pre-USED, and I am NOT an expert on anything I sell. I try to describe all items as accurately and honestly as possible. My idea of great may be different than yours, so PLEASE use all pictures as the best part of the description. Due to the fact that all these items are vintage and or pre-owned they are AS IS. Most items will need a detail ... morecleaning. I wipe all items down. But leave the fine cleaning to you. Shipping: I do my best to calculate the correct shipping cost. I do combine shipping. And will figure the exact cost to ship the items to you. I will send you an invoice with the correct amount. I ship almost daily, and mail by 1 pm. I do my best to send your purchase 1 day after payment. Payments: I accept PAYPAL. Other payment forms may be accepted. Please e-mail first. All payments must be made in within 5 days of auction ending, or just let me know. I am easy to work with. I use EBAY Unpaid manager after 5 days. Feedback: I am an honest seller. Try to describe every item best as I can. If you are not completely satisfied PLEASE contact me prior to leaving feedback. I am easy to work with, I will make things right. I will leave POSITIVE feedback, when you pay. I strive for EXCELLENT CUSTOMER SERVICE, and will package your items will great care! Returns: I accept returns ONLY if the item is grossly misrepresented by me. I post LOTS of pictures. So please use them as part of the description. READ ALL DESCRIPTIONS AND SEE ALL PICTURES! Ask ALL questions prior to the auction ending, please allow 24 hour
|
|
|
MORGAN NO. 40 SWIVEL BASE BENCH VISE , 4" JAWS
JAWS OPEN TO 6" OAL. IS 17" CLOSED x 9"H WEIGHS 54 LBS.
|
|
|
Vintage Wilton Shop King Swivel Bench Vise 4" Jaws 25 Lbs. Made In Chicago USA
Full specs at the bottom of listing. Art Deco and vises go together like ice cream and pie. The Shop Kings are absolutely stunning vises and it's a shame this great sense of style in manufacturing was lost somewhere along the way. Shop Kings were first sold by Wilton in 1951 and production didn't continue but for a few years before they changed to a different model. That was a real loss in my opinion as I consider them to have some of the most handsomely designed lines for any vise ever sold. Their striking appearance just can't be denied. This 4" Wilton Shop King is in remarkable condition. All of the edges are crisp. It has very few signs of usage and is in overall excellent condition. Clearly it was either extremely well cared for or it hasn't seen a lot of work. I have absolutely nothing bad to say about it. The action ... moreis outstanding and the jaws(Which are in wonderful condition. close up squarely and snugly. Both pipe jaws are included as is the hardy. The hardy isn't original however. It was fabricated from a steel bolt and two nuts welded in place and then shaped, that's why you see signs of a thread pattern on the chisel faces. So while it isn't perfect in appearance it will still make a fine hardy. Ultimately, most of these are missing and it's better than nothing, right? This vise was completely refurbished by myself. A complete cosmetic overhaul. The old paint was removed entirely with gel stripper. A bare metal, thorough inspection revealed no hidden damage or repairs. The cast iron pieces to be painted were warmed to 200 ° and three coats of each color enamel were sprayed. Each paint application was cured at 200 ° for 30 minutes each. There is no paint on any friction surface. The colors are Satin Leaf on Cobalt Blue Metallic. All hardware was cleaned and made to function as new. The vise was then reassembled with a very light coating of synthetic lubricant on the main screw. You don't want to much because it attracts dust. The end result is the beau
|
|
|
VINTAGE WILTON No.4 BULLET SWIVEL BENCH VISE 4 1/2 INCH JAWS
VINTAGE WILTON No.4 SWIVEL BENCH VISE 4 1/2 INCH JAWS THAT WERE NEWLY PURCHASED LAST YEAR THROWING IN A SET OF SOFT JAWS. THERE A BIT LONG BUT STILL WORK WEIGHS 39.5 POUNDS. VISE OPENS SMOOTHLY STARTED STRIPPING IT FOR PAINTING BUT GOT A LARGER VISE SO DID NOT FINISH IT I do not prize the word"cheap. It is not a badge of honor.it is a symbol of despair. Cheap prices make for cheap goods; cheap goods make for cheap men; and cheap men make for a cheap country. ~ William McKinley PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. ... moreWE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING INSURANCE: We package items as well as we can, making the extra effort to ensure they arrive intact& undamaged. We can not, however, be liable for loss or damage in the mail. RETURN POLICY: We describe the items as accurately as possible. IF THERE IS ANY DAMAGE WE WILL MENTION IT IN LISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
|
|
|
VTG. CHAS. PARKER NO. 234 SWIVEL BASE BENCH VISE , 4" JAWS , 88 LBS.
JAWS OPEN TO 6" WHEN BACK OF DYNAMIC JAW IS FLUSH WITH BACK OF STATIONARY JAW.WILL OPEN ANOTHER 2" OR SO. 20" OAL WHEN CLOSED x 10 3/4"H. THE WRENCH RETENTION RING IS MISSING. HANDLE ENDS NEED TO BE PEENED TO TIGHTEN BALLS. BOTTOM OF JAW IS NOT BROKEN IN PIC.5 THAT IS A SHADOW. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-146febfb556-0x110-
|
|
|
VINTAGE REED 104 1/2 R BENCH VISE 4 1/2 INCH JAW SMOOTH JAWS
VINTAGE REED 104 1/2 R BENCH VISE 4 1/2 INCH SMOOTH JAWS 4 1/2 INCH JAW. ONE CRACK ON THE SHAFT, NOT EFFECTING USE WEIGHS 55.5 POUNDS I do not prize the word"cheap. It is not a badge of honor.it is a symbol of despair. Cheap prices make for cheap goods; cheap goods make for cheap men; and cheap men make for a cheap country. ~ William McKinley PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. WE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING INSURANCE: We package items as well as we can, making the extra ... moreeffort to ensure they arrive intact& undamaged. We can not, however, be liable for loss or damage in the mail. RETURN POLICY: We describe the items as accurately as possible. IF THERE IS ANY DAMAGE WE WILL MENTION IT IN LISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
|
|
|
VINTAGE REED MFG MACHINIST SWIVEL BENCH VISE 4" JAWS & 6-1/2" Opening No. 204R
THIS IS AN OLD VISE MADE IN ERIE PA. HAS A 4" WIDE JAW AND OPENS 6 1/2" AND IS MARKED WITH A PAT NUMBER. WEIGHT IS ABOUT 60-70 LBS WILL SHIPPED BY UPS GR0UND CALL FOR POSSIBLE S/H DISCOUNT. CALLS ARE WELCOME AND P/U AVAILABLE IN NEW PORT RICHEY 727-858-1721.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1470db3ef90-0x114-
|
|
|
Wilton 450s bench vise 4 1/2" jaws with swivel base, excellent condition.
Here I have a wilton 4 1/2" bench vise with swivel base. It weighs in at around 65 lbs it has original jaws in new condition, no backlash what so ever, the Mechanics of this vise is really smooth, it has a new base ring and lock downs, this will ship UPS, any questions please ask. On Jul-06-14 at 12:39:17 PDT. Seller added the following information: This opens safely to about 6" and was made in 1981.
|
|
|
COLUMBIAN 604 SWIVEL BASE BENCH VISE , 4" JAWS
JAWS OPEN TO 6" OR SO. HAS SMOOTH ALUMINUM JAWS. WEIGHS 43 LBS. 17" LONG CLOSED. 9 1/4" H. SLIDE HAS SOME HAMMER MARKS,
|
|
|
Heavy Duty Wilton swivel Base Machinist Bench Vise w/anvil 4" jaws U.S.A.
Up for auction is a heavy duty wilton machinists bench vise. It has 4" jaws and 5 1/2" jaws opening. The vise is used and has normal wear to it. Some dings and scratches and light surface rust spots. All parts move freely just need a cleaning. Overall a nice wilton vise for your bench. See photos for details and conditions, and please ask questions before bidding. Thanks for looking,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-147350fc5b5-0x105-
|
|
|
VINTAGE REED MFG MACHINIST BENCH VISE 4 1'2" JAWS & 6-1/2" Opening No. 204 1/2
Vise will need some cleaning but is in nice shape under crud. Opens and closes nicely and weighs 54lbs. 4 1'2' jaws and 6 1'2 opening. Shipping to USA only. Free local pickup is available if you are near by.
|
|
|
Vintage Wilton Bullet Bench Vise 4" Jaws Made In Schiller Ill. USA 43 Pounds
Up For Sale a good working Vintage Wilton Bullet Bench Vise 4" Jaws Made In Schiller Ill. USA 43 Pounds Heavy Duty 4690 Key Way is Stamped 1 70 Fresh Paint 7" High 4" Jaws Total length 15 1/2" Base Dia. 7" Missing Dust Cover and Jaw on Static side has what appears to be lead filler by previous owner-both jaws are tight Has a tiny drill hole[see photo] on Dynamic Side that is about only 1/8" Deep Note: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer ... morethem accurately. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14763eb79aa-0x108-
|
|
|
Wilton C1 Combo Pipe and Bench Swivel Vise 4 1/2" Jaws 6" Opening American Made
This listing is for a used Wilton C1 Vise. Holds up to 6" pipe 6" jaw opening 4 3/4" Throat 4 1/2" Jaws Swivel If you do not want to pay shipping local pick up is always welcome. This vise is used but in good condition. There is no play in the vise and the jaws are not worn. Please see pictures for more detail.
|
|
|
Wilton 1644 644 Bench Vise 4'' Jaws 4'' opening pipe jaw small anvil !
Greeting Wilton Vise lovers and soon to be owners! Up for auction is a Wilton 1644/ 644 bench vise made in Schiller Park. Illinois U. S. A It weighs 35 lbs, has 4' jaws and opens to 4 1/4' This vise opens and closes smoothly and the jaws line up as they should and they look like new.It spent it's life in a retire's basement workshop.The light oxidation you see was from the basement humidity. Please look closely at the attached photo's as the provide the best overall physical condition. I would prefer local pick up on this item but will ship it at the buyers expense. The package.Which will may entail a small crate will measure 14' x 14' x 16' and weigh approximately 35lbs. I ship U S P S from 48089 usually within 3 days of confirmed payment to my pay pal account. I ship to pay pal confirmed addresses only. Please ... moreNote: It is my policy to re-list items that have not been paid for within three days of being invoiced. If payment is made before the item is sold it will be delivered to the original purchaser. I am willing to ship this item worldwide via USPS* Overseas shipping must include tracking capabilities.All shipping costs are the responsibility of the buyer. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1478eb69ef2-0x114-
|
|
|
vintage HOME 204 bench vise with pipe jaws + anvil - Japan - 4" x 5 1/4" - red
Up for auction is a vintage bench vise in nice as found condition. 4" jaws and 5 1/4" fully extended. Marked"HOME 204 JAPAN" Weighs over 12 lbs. unpacked. Has white paint as shown. Pipe jaws + sm. anvil. PLEASE READ BELOW BEFORE BIDDING* Outside of the USA please check shipping calculator before bidding* FREE DOMESTIC DELIVERY CONFIRMATION" I DO NOT FALSIFY AMOUNT ON CUSTOM FORMS" POST OFFICE WILL TRACK OUT OF THE COUNTRY PACKAGES UP TO THE POINT THAT THEY LEAVE OUR CUSTOMS. ONCE A PACKAGE LEAVES CUSTOMS WE ARE UNABLE TO TRACK IT AND HAVE NO CONTROL OVER AMOUNT OF TIME IT TAKES TO DELIVER A PACKAGE. COMBINED SHIPPING AVAILABE. BE ADVISED POST OFFICE HAS SIGNIFICANTLY INCREASED RATES. ITEMS GOING OUTSIDE THE U.S.A. OVER 4 LBS. HAVE TO GO PRIORITY AND THIS DOES INCREASE THE POSTAGE QUITE A BIT. EMAIL FOR MORE PICTURES ... moreIF NEEDED. ASK QUESTIONS Unless otherwise stated all of my items are in used condition from local estate and storage shed sales. If you have any questions about the condition or if you feel I have made a listing mistake please email me. I usually ship the day after payment is received and leave feedback when shipped. Sorry i do not end auctions early. PAYMENT DUE WITHIN 5 DAYS OF AUCTION END AND WILL BE BY PAYPAL ONLY. After auction end if you have changed your mind. Can not pay at the present time, or have other problems, please let me know. WE CAN ALWAYS WORK SOMETHING OUT. Also. If not satisfied with goods or service let me know. Satisfaction guaranteed.
|
|
|
Sears Craftsman 4-1/2" Swivel Bench Vise Swivel Base Jaws Excellent
Sears Craftsman 4-1/2" Swivel Bench Vise Swivel Base Jaws Excellent Description: Sears Craftsman 4-1/2" Swivel Bench Vise Swivel Base Jaws Excellent In as found condition at an estate sale. This is a quality Sears C raftsman 4 1/2" Swivel Bench VIse with pipe jaws. It is in used but excellent condition. Please see the pictures for details. We accept PayPal. Item to be shipped via FedEx Ground Check out my other items!
|
|
|
CHAS. PARKER NO. 439 DOUBLE SWIVEL BENCH VISE , 3 3/4" WIDE JAWS
WEIGHS 75 LBS. JAWS OPEN TO 7" 17 1/2" OAL CLOSED. x 10 1/2"H. SWIVELS NICELY.
|
|
|
Vintage Chas Parker 954 Bench Vise 4" Jaws Antique Parker Vise
This is a vintage Chas. Parker vise model#954. The jaws are 4" wide and open up to 6" This is a very heavy made in the USA vise. It works well and has no cracks.
|
|
|
VTG. CHAS. PARKER NO. 439 SWIVEL BASE BENCH VISE , 3 3/4" JAWS , 79 LBS.
This is a vintage Parker cast iron bench vise made by Charles Parker Company in Meriden. Connecticut. Something actually made in USA. Don't see that much anymore. It is a Model no.439 which has the 3 3/4" wide jaws. Vise will open to 9" Has the swivel base. Handle is straight. Very smooth operation. Parker was a fine old New England manufacturing company. Had a large foundry so was able to cast a large variety of items over the years. Made tons of very good vises. Most famous for the highly prized Parker shotgun. If you need a great high quality. Made in the USA bench vise, this should do it. This is a heavy vise. So will ship in a heavy duty box for the best cost and full insurance coverage. JAWS OPEN TO 6" WHEN BACK OF DYNAMIC JAW IS FLUSH WITH BACK OF STATIONARY JAW.WILL OPEN ANOTHER 3" OR SO. 18" OAL WHEN ... moreCLOSED x 9"H. please let me know if you have any questions.
|
|
|
Large Bench Vise Model #122 Antique Vintage 7 3/4" Jaws
Large Bench Vise Model#122 Antique Vintage 7 3/4" Jaws. Over two(2) feet long. End to end. Probably a couple of hundred pounds. I'll add the weight soon. Contact me regarding shipping. Steve 540-327-1097.
|
|
|
Sears Craftsman 4-1/2" Swivel Bench Vise Swivel Base Jaws Excellent black
Item for sale: Sears 4 1/2 Bench vise. Item has been sandblasted down to bare metal and painted gloss black. All in great working order. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14888a9cf48-0x10f-
|
|
|
Wilton Tradesman 1740 Swivel Combination Bench Vise 4" Jaws 31 Lbs. bullet vice
Full specs at the bottom of listing. This 4" Wilton Tradesman is in superb condition. No doubt it has seen very little use. It had jaw covers on it when I brought it home and that explains why the steel jaw insert faces are as fantastic as they are. I love finding them like this. Makes my job easy. I have nothing negative to report here. The jaws line up flush and perfect, even clamping pressure across the board. To me that's the most important aspect of any vise because if it doesn't clamp well then it isn't much of a vise. As you most likely very well know I gave this vise a very thorough restoration as I do pretty much all the vises I put up for auction. You know the drill; strip the paint with gel. Quick media blast, inspection, warm the cast iron pieces in an oven, spray on three coats of each color, bake each coat at ... more200 degrees for 30 minutes, clean the steel hardware up and reassemble with synthetic lubricant. Boom! Done, just like that. This is a pro job, no corners were cut and it's going to last a very, very long time if treated properly. I do all the little things to help set my vises apart from others. The deeper you look into it the more impressed you'll with it you'll be. It's very nice and you have my word that you're going to love it. The gray is Satin Granite enamel. The green is Satin Leaf which is a match to the color Wilton used on their vises in the 1940's so we have a little throw-back there. You may have noticed the racing stripes. maybe not, but probably. These are painted on, not tape, but you knew that because you looked at the dozen large gallery photos. Brand new Wilton foil decals were applied on both sides. I'm telling you, this Tradesman is super, super nice and it will look dynamite bolted to your bench. Please let me know if you have any questions. SHIPPING. Important: Obviously this won't be cheap to ship. The bare vise weighs 30.4 pounds and that's before packaging. I apologize for the cost but the rates are what they are. Th
|
|
|
Reed Heavy Duty 104 Swivel Bench Vise, 4" Jaws, about 9" opening, almost 60 lbs.
Reed Heavy Duty 104 Swivel Bench Vise Removable 4" Jaws in very good condition. No chips or cracks. About a 9" opening and weighing almost 60 lbs. This vise is well used but not abused, both handles are straight and turn easily. Shows surface rust. Paint drips and oil reside. A good cleaning and fresh grease and this vise will last a lifetime! Please look at the pictures and ask any questions before bidding. Please check my feedback and I do combine S/H.
|
|
|
Vintage Hollands bench vise 4 inch wide jaws, opens to 6.5 inches 45lbs # 14
ESTATE FIND For sale is a vintage Hollands#14 bench vise. The 1 indicates a fixed/non-swivel base and the 4 indicated a 4 inch wide jaw. Each 1/2 of the the vise has matching serial numbers of 354. This vise was likely made in the 1940's and weighs about 45 pounds. This vise shows signs of prior use but is in good operating condition. The metal integrity is good with no cracks. Has newer paint and it is smooth and tight when closed. Although the crank handle is missing the spindle turns easily by hand. Jaws open to 6.5 inches wide. See pics for further details. Shipping is determined by ebay. You are purchasing the exact vise pictured. RETURN POLICY: I believe that if you give honest descriptions with enough pictures. You shouldn't need a return policy, that being said I still maintain a 14 day return policy. Occasionally I will make ... morea mistake in my listings. If make an error please be patient and I will remedy the situation. If you are the type of person who is intolerant, lashes out and holds a grudge for an honest mistake please do not bother bidding on this item or any other item I have listed. For everyone else, please buy/bid with the assurance that if I have made an error in my listing, I WILL take care of you. And if you have made an error, and bought the wrong size, for example, I will still take care of you(but I’ll let you pay the shipping! Domestic Shipping: The USPS yet again raised its rates on January 26, 2014 on domestic and international mail. I package well, and have a great track record of getting everything to each buyer, and getting it there in one piece. I generally use the US Post Office for items under 5 lbs or so. California buyers: Unfortunately if I ship to a California address, I either have to charge state sales tax, or receive a valid resale form. AUCTIONS: I won’t end an auction listing early to sell it to you directly. As a bidder, I really dislike going back at the end of an auction to bid, only to discover that the seller had ended the auction early. So I won’t do that fo
|
|
|
Littlestown No 400 Swivel Bench Vise 4" Jaws with Pipe Jaws Made in USA
This auction is for a Littlestown No 400 swivel bench vise. Littlestown Hardware& Foundry Co. Littlestown. PA. U.S.A. All parts appear to be original with no broken or repaired parts. Comes with the 2 pipe jaw inserts. The jaws are not lined up when closed. Off by a 1/16" or so. See pic. Little bit of looseness in the movable jaw. The handle is very nice, no dings and is straight. Saw marks on the top of the jaws. Appears to have most of the original paint intact. The jaws measure 4 1/8" but this is referred to as a 4" jaw vise. Common stuff from use over the years. Model No. 400 Jaws: 4" Opens to: 5" Length When Closed: 12 1/2" Height: 7" Weight: 27 1/2 Pounds Manufactured In: USA Swivels ~180° SHIPPING& PAYMENT If you need an alternate shipping method. Please contact us about additional costs ... morebefore you submit payment. While I do make every attempt to ship next business day, please allow me 3 days for shipping after payment is received. Payment by PayPal. We will ship this item only to a confirmed address. In the unlikely event that the package is damaged in shipment. Make note of that fact when you receive the package from the carrier and contact us without delay. Keep all packaging and documentation. Thanks for bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage swivel base bench vise, #112, Hdwe & Fdry Co. Littlestown,PA. 3 3/4 jaws
Vintage swivel base bench vise. 112, Hdwe& Fdry Co. Littlestown,PA. 3 3/4 jaws Vintage swivel base bench vise mfg'd by Hardware& Foundry Co. Littlestown, PA. 3 3/4" wide jaws open to about 3 inches. Good working order. Used but not beat up. Smooth working with original paint. Normal signs of use and age. See pic's for best description. Thanks for looking. USA shipping only. I will combine shipping with multiple purchases. Payment due within 3 days of auction end. gsrx_vers_586(GS 6.8(586) Ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-148c1ae458c-0x116-
|
|
|
Vintage Wilton Bullet 840 Machinists Bench Vise swivel Base 4"Jaws 3288-60
Vintage Wilton Bullet 840 Machinists Bench Vise swivel Base 4"Jaws 3288-60 Shipping Info: Weight:40 Size:16*10*8 QUESTIONS Please ask all questions 48 hour before the end of sale. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. We attempt to remove item/s posted on eBay that have sold out of our brick and mortar shop in a timely manner. If in the event ... morean item/s is purchase on eBay and it has sold out of our store, we will cancel the eBay sale and issue a full refund to the buyer. Feedback; If you are not happy with your item. Please contact us before leaving negative feedback. We want you happy with your purchase. We will work with you to make your purchase right. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment
|
|
|
Wilton 4" Wide Jaws 49Lb Machinist Bullet Bench Vise
Wilton 4" Wide Jaws Machinist Bullet Bench Vise This vise weighs 49lbs 8oz. It has been repainted. Condition as pictured Launched from my store- Powered by
|
|
 |