|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$12.95 Shipping Condition: Used Location: Poughkeepsie, United States You will receive the exact item(s) shown in the pictures. I usually put a ruler in the pictures for size reference. If I see any defects I will show them ... more(any defects missed are accidental).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
$12.00 Shipping Condition: Used Location: Watertown, United States This is a 3 1/2" adjustable drill press vise. It works good but could use a cleaning. It has been in a workshop. Pictures show condition
Buy It Now
$15.12 Shipping Condition: New – Open box Location: Easley, United States This adjustable angle tilting machinists vise from Craftsman is a high-quality product made in the United States. It has a sturdy jaw width of 2-1/2 inches ... moreand a jaw opening capacity of 2-1/2 inches, making it a versatile tool for workholding. The vise is brand new and has never been used before. It comes in its original packaging and is ready to be put to work in your workshop. Suitable for use with CNC machines, metalworking, and manufacturing, this vise is an essential tool for any professional or DIY enthusiast. Shipping UPS is $15.00 NO RETURNS.
Buy It Now
$7.99 Shipping Condition: New Location: Redford, United States Jaw Depth: 35MM. Jaw Opening: 70MM. Cast iron body.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Meriden, United States Jaw Width : 50 mm Max. Jaw Opening: 50 mm Jaw Depth : 25 mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
$26.25 Shipping Condition: Used Location: Ruffs Dale, United States This heavy-duty machinist drill press vise from Palmgren is a high-quality product that ticks all the right boxes. With a jaw width of 2-1/2 inches and ... morea jaw opening capacity of the same, this vise is perfect for a range of applications. Made in the USA, this vise is built to last and is sure to withstand even the toughest of jobs. Featuring a tilting mechanism, this vise is versatile and can be used in a range of positions. With no custom bundle included, you can purchase exactly what you need to get the job done. Buy with confidence and add a reliable piece of equipment to your workshop today.Looks like it’s missing parts, please see pics prior to purchasing
Buy It Now
Free Shipping Condition: New Location: Meriden, United States Jaw Width : 50 mm Max. Jaw Opening: 50 mm Jaw Depth : 25 mm.
Buy It Now
Free Shipping Condition: New Location: Tampa, United States 1 set 6" Tilting and Swiveling Milling Vise (290024).
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States 4" 100mm Horizontal Vertical Tilting Rotary Table:-. 3 Jaw Self Centering Chuck (65mm) Dia. M14X1 Threaded. 65mm Self Centering Chuck 3 Jaw. Horizontal ... more& Vertical Rotary Table 4" Table height 66 mm in flat position.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
$39.85 Shipping Condition: Used Location: Rosholt, United States 4-1/2 " wide at base of Upright arms. 8-3/4" long base where tightning to table goes--.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This2 Way Clamp Vise Is an Essential Tool for Fitters. Our Clamping Vise Has Powerful Clamping Force and Can Fix Workpieces Very Securely. This Ensures ... morethe Stationarity and Stability of Workpieces so They Won't Move Even Slightly As Much Force Has Been Applied by the Fitter.
Buy It Now
Free Shipping Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
Free Shipping Condition: Used Location: Rough and Ready, United States This is a Palmgren multi position compound angle milling/drill vise. It swivels and tilts horizontally and vertically. It's in really nice used condition. ... moreIt has had some fasteners replaced and it is cleaned. Lubed and ready to work. It has one shallow errant drill hole. This is a really useful, versatile, vise. Free shipping to the lower 48.
Buy It Now
$100.00 Shipping Condition: Used Location: Edison, United States Tilt / Swivel Vise. Brown & Sharpe. Universal Milling Machine. 2-3/4" Max. Jaw Opening.
Buy It Now
$12.43 Shipping Condition: New Location: Gap, United States Warren was founded in 1911 by George F. Konold. Weight 8.13--Made in U.S.A.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR Tilting Milling Table Tilting Angle Milling Machine Adjustable Plate. VEVOR 6" Rotary Table Horizontal Vertical Dividing Plates ... morefor Milling Machine. VEVOR 2.2KW CNC Water Cooled Spindle Motor ER20 VFD Clamp Pump Pipe Collet 110V.
Buy It Now
$141.98 Shipping Condition: Used Location: Tampa, United States 1 set 6" Tilting and Swiveling Milling Vise (290024).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
$17.95 Shipping Condition: Used Location: Findlay, United States HEAVY DUTY 3 1/2" JAW ANGLED TILTING PRESS MACHINIST VICE (TL383)
Buy It Now
$96.78 Shipping Condition: New Location: Madison Heights, United States Base swivel 360 degree, vise tilts 90 degree. Swivel jaw plates are hardened and ground to HRC55-60. Jaw width: 4".
Buy It Now
Free Shipping Condition: New Location: Sheridan, United States Jaw Width: 50 mm Max. Jaw Opening: 50 mm Jaw Depth: 25 mm. 4" (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. 80 mm 4 Jaws ... moreIndependent Dog chuck with Back Plate & T nuts - (USA FULFILLED).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Jama Masjid S.O, India Milling Machine Vise 2 Way 2" Precision Ground and Smooth Soft Paint Mounts to milling machine or drill press table. Rotates 360 degrees and inclines ... morefrom 0 to 90 degrees to mill or drill at any angle in-between. 2 inch wide x 1 inch deep jaws open 1-7/8 inches. E ngraved markings for degrees of incline and rotation. Payment Information Once You Place An Order with you through eBay. They will send you a Confirmation E-mail PAYPAL: You can directly transfer money online through Pa y Pa l. A service owned by eBay itself. Funds may be transferred from Credit Cards or Online Bank Transfers. This is the easiest and fastest mode for payment on eBay. Terms And Conditions We will wait for 7 days for the payment from the end date of the listing there after we will not assure the availability of the product. NOTE: We dispatch products within 7 to 10 Working days after Payment. Shipping Instruction 1)PLEASE MENTION YOUR FULL ADDRESS WITH YOUR TELEPHONE NUMBERS. IF YOUR CITY IS NON-SERVICEABLE WE SHALL REFUND YOU FULL AMOUNT. 4) Sales Tax/VAT/Octroi/ Import Duties for Domestic or International as applicable& will be born by the buyer. 5) Please open all parcels in front of the courier person and sign on the receipt only after checking for damages in transit. In case if the item is damaged in transit do not sign on the courier receipt and do not accept the parcel. That way we can handle all the claims with the courier company and save you a lot of hassles. We will not be responsible if u accept the damaged parcel. Important Notice If u have any complaint regarding to product. Product Damaged within transit or product is not working after received then please inform us before leave feedback to us. I have several option to solve your problem immediately. If you received the product in damaged/Manufacturing defective condition then return the product unused condition& original packi
Buy It Now
$7.50 Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Dimensions Jaw Width: 3" Jaw Opening: 2.95" Jaw Height: 1" Weight: 13 Lbs Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism ... morewithout base Vise Key: 11.11mm table slot width, 12.00mm base width Description： Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. .
Buy It Now
Free Shipping Condition: New Location: Sheridan, United States Precision Milling Machine Vise 2"(50 mm)-3 Way (Swivel, Tilting, Angle Vice)Quality Engineering Machine Tools. Jaw Width 2", Jaw Opening 2" & Jaw Depth ... more1" - 3 Way Milling Vice. 4" regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED.
Buy It Now
$3.00 Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Manual 2 Way Clamp Vise CNC Swivel Base & Angle Swivel 360 º Tilting 90º Tool. This 2 way clamp vise is an essential tool for fitters. Our clamping vise ... morehas powerful clamping force and can fix workpieces very securely.
Buy It Now
Free Shipping Condition: New Location: High Ridge, United States (2) Angular Slides That Allow the Workpiece to Be Set at Any Desired Angle: -45°Tilting Range on Either Sides and 90° Vertical Indexing on Either Side. ... moreJaw Width (In.). Jaw Opening (In.). Jaw Deflection.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR Milling Drilling Machine Worktable Cross Slide Table 4" X 7.3" Bench Table. VEVOR 8" Precision Horizontal and Vertical Rotary Table. VEVOR Rotary ... moreTable XY Axis Rotary Table 8" 3-Slot for Milling Drilling.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States PATENTED GRIPLOCK PRINCIPLE ELIMINATES TILT OF MOVEABLE JAW WHEN IT IS CLAMPED AND ALSO TAKES UP WEAR. FOUR JAW PLATE POSITIONS ALLOW EXTRA CAPACITY WITH ... moreJAW PLATES IN THE OUTSIDE POSITION. ALL IMPORTANT SURFACES PRECISION GROUND.MAX. JAW OPENING: 2-3/4” (66mm)JAW WIDTH: 2”JAW HEIGHT: 3/4”O.A.L: 8”OVERALL HEIGHT: 4"W.T: 12 LBSFroo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 Way Clamp Vise Is an Essential Tool for Fitters. Our Clamping Vise Has Powerful Clamping Force and Can Fix Workpieces Very Securely. ... moreThis Ensures the Stationarity and Stability of Workpieces so They Won't Move Even Slightly As Much Force Has Been Applied by the Fitter. What's Included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 Lb (25 Kg) Package Dimensions (L X W X H): 16.5" X 9.8" X 7.5" (42 X 25 X 19 Cm) Features Precision Milling Vise with a Jaw Width of 5 Inch (125 Mm). Jaw Opening: 3.74 Inch (95 Mm) Tilting and Swiveling Vise Height: 6.5 Inch (165 Mm). Jaw Height: 1.8 Inch (46 Mm) Swiveling Vise Features with 2 Operating Ways. 360-Degree Swiveling Base and 90-Degree Tilting Function Offer More.
Buy It Now
Free Shipping Condition: Used Location: Cleveland, United States This Brown & Sharpe 5" Universal Milling Machine Tilt/Swivel Vise No. 2 is a great addition to any workshop. Made in the United States, it features a ... morejaw opening capacity of 2-3/4 inches and a jaw width of 5 inches. The vise is perfect for CNC, metalworking, and manufacturing projects, and is compatible with a wide range of workholding and toolholding accessories. It's a versatile and durable option for any workbench.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between ... morejaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features: Lock down design up to 80% deflection. All sides flattened. Can be mounted on side or base. For small to intermediate NC/CNC milling, grinding, tapping operations in multiple vise set-ups with or without sub plates..
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States This2 Way Clamp Vise Is an Essential Tool for Fitters. Our Clamping Vise Has Powerful Clamping Force and Can Fix Workpieces Very Securely. This Ensures ... morethe Stationarity and Stability of Workpieces so They Won't Move Even Slightly As Much Force Has Been Applied by the Fitter.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This2 Way Clamp Vise Is an Essential Tool for Fitters. Our Clamping Vise Has Powerful Clamping Force and Can Fix Workpieces Very Securely. This Ensures ... morethe Stationarity and Stability of Workpieces so They Won't Move Even Slightly As Much Force Has Been Applied by the Fitter.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States This2 Way Clamp Vise Is an Essential Tool for Fitters. Our Clamping Vise Has Powerful Clamping Force and Can Fix Workpieces Very Securely. This Ensures ... morethe Stationarity and Stability of Workpieces so They Won't Move Even Slightly As Much Force Has Been Applied by the Fitter.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 1 set 6" Tilting and Swiveling Milling Vise (290024).
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: Used Location: United States Up for consideration is the Craftsman Vise shown in the photos. Made in the USA. SIZE & CONDITION can be seen in photos. Item is pre-owned/used and DOES ... moreshow the signs of age & use shown in the photos.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Dimensions Jaw Width: 3" Jaw Opening: 2.95" Jaw Height: 1" Weight: 13 Lbs Accurate to 0.002” per 4” on squareness and 0.006” per 4” on ... moreparallelism without base Vise Key: 11.11mm table slot width, 12.00mm base width Product Features: Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
|
|
|
|
PALMGREN 2 1/2" JAWS TILTING MACHINISTS VISE DRILL PRESS VICE 3 " CAPACITY
FROM A CLOSED MACHINE SHOP.VERY GOOD CONDITION 2 1/2 INCH JAWS OPENS ABOUT 3 INCHES GOOD VISE Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
|
|
|
MACHINIST TILTING VISE WITH 2 BLOCKS
Was very well used.But still functions great.has no makers marks. I cleaned and oiled it was a mess when I bought it full of shavings etc. I will combine lots to save youmailing cost whenever possible. If you want to combine items that willclose in a couple of days please let me know asap and wait to pay until you areinvoiced for the combined total. Do not pay for each item. Separate paymentsvia Pay pal mean more fees for you and me. Additional items in same mailing areno extra charge. I usually will try to send combined items in a flat rate box.Most of the time depending on size of the items it is the cheapest way to go. Most of my tools are professionally cleaned andsometimes oiled to ensure a quality product. No intent to restore. Also due to the amount of people not paying. Ifyou do not pay or contact me in four days after auction and ... moreyou won theitem I am forced to open a nonpayment case so I can get my fees returned to me. ThankYou Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
2 1/2" CRAFTSMAN TILTING MILLING MACHINIST VISE
Nice Vise in good working condition. Please check the pic's. 48 US only.
|
|
|
Tilting Machinist Vise Not Used Much *VGC* 2&7/16" Removable Jaw
Tilting Machinist Vise Not Used Much*VGC* 2&7/16" Removable Jaw Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Tilting Machinist Vise Not Used Much*VGC* 2&7/16" Removable Jaw Vintage machinist tilting vise is in excellent condition showing not too much use base measures-8&1/16" long-x-3&5/16" wide& weighs 9 pounds& 11.6 ounces before packaging. I HAVE MANY GREAT ITEMS LISTED IN MANY DIFFERENT CATEGORIES. I WILL HAPPILY COMBINE YOUR SHIPPING TO SAVE YOU$$ TRACKING NUMBER INCLUDED! I APPRECIATE YOUR BIDS/PURCHASE.rick Last-Minute Bidders And Auction Watchers: Click on this button to send yourself a Remind Me alert to your cell phone. Pager, PDA or e-mail address minutes before ... morethe auction ends. It's FREE For All Bidders RemindMe By Summary of Our Selling Policies Payment We accept all credit card payments from PAYPAL.COM only. We do not take credit cards directly over the phone or via E-mail. Payment is due within 7 days of auctions end SHIPMENT: Shipment usually occurs within 1-2 business days after payment is received and processed. FREQUENCY OF SHIPPING. Monday- Friday Refunds& Returns.i include a tracking number with every U.S. order at no extra cost so you may track the shipping progress on your package.thank you very much for your purchase. order, Contact Me- Communication DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak.
|
|
|
2.5" Tilting Table Machining Vise
2.5" Tilting Table Machining Vise Good Condition Questions? Call Robert at 607-259-5615 27-C
|
|
|
PALMGREN 2 1/2 ANGLE TILTING VISE GOOD USED MILLING DRILLING ATLAS CRAFTSMAN
PALMGREN 2 1/2 ANGLE TILTING VISE GOOD USED MILLING DRILLING ATLAS CRAFTSMAN Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge GOOD USED PALMGREN USA TILTING ANGLE VISE 2 1/2 INCH CAPACITY AND 2 1/2 WIDE JAWS. WORKS SMOOTHLY. HAS SOME PREVIOUS OWNERS WITNESS MACHINING ERRORS IN THE TOOL. WORKS WELL AND DOES NOT EFFECT THE OPERATION AT ALL. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
CRAFTSMAN MACHINIST TILTING DRILL PRESS VISE 5 1/2 391.5187
CRAFTSMAN MACHINIST TILTING DRILL PRESS VISE 5 1/2 391.5187 Manufacture: Craftsman CRAFTSMAN MACHINIST TILTING DRILL PRESS VISE 5 1/2 391.5187 Condition: Pre-Owned Warranty: 90 Day warranty Sold as pictured Please feel free to contact us if you need more information Wesbell Technologies ships all domestic orders via UPS Ground. If you would like the order shipped on your account please send an e-mail after you purchase the item and we would be happy to adjust your invoice. Thank you for looking Customer Satisfaction Beyond the Call Wesbell Technologies 555 Lucy Garrett Road Roxboro. North Carolina 27574. USA 1-336-322-0600 Ext. 262 Powered by The free listing tool. List your items fast and easy and manage your active items. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f12d4ddc5-0x105-
|
|
|
PALMGREN 2 1/2'' ANGLE TILTING VISE MILLING DRILLING NO.000 CHICAGO TOOL CO.
PALMGREN ANGLE TILTING VISE MILLING DRILLING NO.000 CHICAGO TOOL CO. MADE IN USA. V GROOVED JAW 2-1/2' JAW. JAWS OPEN UP TO 2-1/2' 1-1/2' JAW DEPTH. VISE WEIGHTS 9 LBS 6 OZ. 9' OAL WHEN CLOSED. I have made an honest and f of this item. But I am only human. I do miss things occasionally, and if things is not as I have represented it, I certainly will do what I can to make it right. Please remember when buying vintage or used items,they have had a life before they reach you. Items will always have some wear and will rarely look new. Please look at all pictures and ask any questions before bidding I reserve the right to change mail carriers.I pack all packages very carefully and as lightly as possible. I ship whichever postal method is the least expensive for each individual package and I will combine shipping for discounts so ... moreplease check my listings to get the most bang for your buck! Most packages ship the next day after payment but please allow 2 days as my schedule is unpredictable and if you are in a hurry please tell me and I will make a point to get it out the next day. I report ALL NON PAYERS so if you are not going to pay.don't buy. If you have a problem and need more time, please ask as I will work with you, but deliberate non payer sand non communicators will be reported. I welcome ALL INTERNATIONAL buyers but please be aware of a couple things.I usually ship Priority International,however insurance is not available with this service nor is tracking once it leaves the United States. Also please be aware of your country's Duty Regulations as to what is allowable in your country and what the possible duty fees are as this is not covered in your purchase price.
|
|
|
PANAVISE 2-1/2" TILTING SWIVEL HEAD VISE
aims PANAVISE 2-1/2" TILTING SWIVEL HEAD VISE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by PanaVise. This is a PanaVise Vise& Vacuum Base Mount in good condition. Patent# 2898068 Features: The PanaVise is an all-purpose work holding unit. Perfect for both industrial and home hobbyist applications. Nylon jaws offer excellent electrical insulation and gentle holding power[continuous heat tolerance up to 200�F(93�C) Intermittent heat to 300�F(149�C) Interchangeable jaws available. A single knob controls the"tilt. Turn and rotate" function of the patented split ball, which allows the head to move easily and conveniently through three planes(360� rotation, 360� swivel and 90� pivot) Specifications: Rotation: Swivel-base 360 degree. Jaw Width: 2-1/2" ... moreMax. Jaw Opening: 2-1/2" Height: 6-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PANAVISE 2-1/2" TILTING SWIVEL HEAD VISE Reliable Tool Inc. c 2011 | Powered by
|
|
|
HEAVY DUTY 90 DEGREE ANGLE TILTING VISE - 2-1/4" CAP.
aims HEAVY DUTY 90 DEGREE ANGLE TILTING VISE- 2-1/4" CAP. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Heavy Duty 90 Degree Angle Tilting Vise in good condition. Features: Equipped with V-Groove on one side. Specifications: Max. Capacity: 2-1/4" V-Groove Capacity: 1/8" Jaw Height: 1-1/2" Jaw Width: 2-1/2" Overall Dimensions 9-1/4" x 4" x 3-1/2" tall(closed) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY 90 DEGREE ANGLE TILTING VISE- 2-1/4" CAP. HEAVY DUTY ... more90 DEGREE ANGLE TILTING VISE- 2-1/4" CAP. HEAVY DUTY 90 DEGREE ANGLE TILTING VISE- 2-1/4" CAP. Reliable Tool Inc. c 2011 | Powered by
|
|
|
Vtg-Tilting 2-1/2" Machinists / Drill Press - Work Holding Vise-FREE SHIPPING!
Vintage 2-1/2" Tilting Machinists- Drill Press Vise- Lot's Of Character& Experience! Price Includes Shipping! We have for your consideration a Vintage 2-1/2" Machinists/ Drill Press- Work Holding Vise in fair to average overall working condition and yes it has- Lot's Of Character& Experience! The vise turns freely- opens to an absolute max of 2-3/4 inches and seems to work the way it is supposed to. One jaw is missing it's pad insert- otherwise I see no other obvious cracks/ breaks or repairs. I do not see any identifying marks on the vise except for the intials- E.F.J. P le ase refer to the pictures for measurements. The vise jaws measure 2-1/2" in width- opens up to 2-3/4" The vise measures right at 8" in length. 3-1/2" in height and weighs 9 lbs! What can we say- please take a good/ close ... morelook at all( 12) pictures- please note: there are no other items and/or attachments of any sort included in the sale- what you see is what you are getting" Normal 0 false false false EN-US X-NONE X-NONE The vise is used and in fair to average overall vintage working condition. The vise obviously shows lots of wear- scratches/ scuffs/ marks/ hammer strikes/ grease residue and drilling marks- see pics) And once more- one jaw is missing it's pad insert(see pics) Just a reminder: what you see is what you will be getting- and once more- Price Includes Shipping! Please note: vise may be partially dis-assembled for shipping- easily re-assembled. Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your
|
|
|
Machinists (18D) 2 1/2" Tilting Drill Press Vise
See Pics No Issues Works Perfectly Palmgren Clone ````````````````````````````````````````````````````````````````````````````````````````````````````````. PLEASE NOTE: THE NUMBER AFTER THE WORDS"BUY NOW" IS THERE FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THAT THAT IS THE NUMBER OF ITEMS FOR SELL! EXAMPLE: BUY NOW(4) SQUARE COMBINATION. ONCE AGAIN. THE NUMBER AFTER THE WORDS"BUY NOW" IS THERE FOR THE SELLERS REFERENCE ONLY AND DOES INDICATE THAT THAT IS THE NUMBER OF ITEMS FOR SALE! Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years ... morewith Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^
|
|
|
PALMGREN 1 1/2” ADJUSTABLE TILTING BASE VISE # XO 90 DEGREE NICE
PALMGREN 1 1/2” ADJUSTABLE TILTING BASE VISE# XO 90 DEGREE NICE Up for auction today is nice tilting machinist vise marked PALMGREN XO and has a partial paper label still. It measures 5 ½” long. 2 ½” tall and 1 ½” wide. The vise opens to 1 ½” This vise is in excellent condition. It will be partially disassembled for shipping in small flat rate to save you money. Please see photos to determine condition and ask questions as needed. Winning bidder agrees to pay $ 7.20 for shipping and handling which includes delivery confirmation but not insurance. NEVER A RESERVE Please read information below before bidding. I thank you for viewing my item and good luck with your bid. My aim is to always fairly represent the item’s condition and what the item is. I will do this by providing a description and pictures to the best of my ability. ... moreThe pictures are an important part of the description so please look carefully. If you have information about this item in contrary to what I stated please let me know and I will correct it. If I have one. I will state the history of the item as conveyed to me. Since all the items I sell were purchased used and may have had many owners, I will never know all the history as far as the environment they were kept in. The items I sell are vintage or older and normal wear is to be expected. And will often enhance its beauty and value. Communication and understanding is essential to ensure a mutually satisfying transaction. So please e-mail me for any clarification of description needed or more photos. All items are sold as is with no returns. Please be certain of what you are bidding on before you bid. Please look at my feedback and know you can bid with confidence. Payment is expected with PayPal within 5 days of auction close. If payment is not received within this period. You will forfeit the item to the backup bidder unless we make other arrangements. All items will be shipped within 3 business days of receipt of payment. Unless other arrangements are made(I sometimes need
|
|
|
machinist 2 1/2'' ANGLE TILTING VISE MILLING DRILLING NICE VISE FROM JAPAN
ANGLE TILTING VISE MILLING DRILLING MADE IN JAPAN 2-1/2' JAW. JAWS OPEN UP TO 2-3/4' 1-1/2' JAW DEPTH. VISE WEIGHTS 9 LBS 12 OZ. 8-1/2' OAL WHEN CLOSED. I have made an honest and f of this item. But I am only human. I do miss things occasionally, and if things is not as I have represented it, I certainly will do what I can to make it right. Please remember when buying vintage or used items,they have had a life before they reach you. Items will always have some wear and will rarely look new. Please look at all pictures and ask any questions before bidding I reserve the right to change mail carriers.I pack all packages very carefully and as lightly as possible. I ship whichever postal method is the least expensive for each individual package and I will combine shipping for discounts so please check my listings to get the most ... morebang for your buck! Most packages ship the next day after payment but please allow 2 days as my schedule is unpredictable and if you are in a hurry please tell me and I will make a point to get it out the next day. I report ALL NON PAYERS so if you are not going to pay.don't buy. If you have a problem and need more time, please ask as I will work with you, but deliberate non payer sand non communicators will be reported. I welcome ALL INTERNATIONAL buyers but please be aware of a couple things.I usually ship Priority International,however insurance is not available with this service nor is tracking once it leaves the United States. Also please be aware of your country's Duty Regulations as to what is allowable in your country and what the possible duty fees are as this is not covered in your purchase price.
|
|
|
PRECISION TOOL MAKERS TILTING SINE VISE 3-1/2" JAW
Precision Tool Makers Sine Vise Model 552H 3-1/2" Jaw x 1-1/2" Tall w/ 4-3/4" Opening Tilts from 0-45 degrees Base Measures 8-1/4" x 3-1/2" w/ 6 3/8" Mounting Holes Vise Sits 4-1/2" Tall When Flat Brand Not Marked. But Note Logo in Last Photo Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
2-1/2" Tilting Mill Vise
This is a used mill vise. Unknown manufacturer, Jaw width: 2-3/8" Height: 3-7/16" Maximum opening: 2-7/8" Tilts from 0 to 90 degrees, There are some holes drilled in it, Shipping: FREE Shipping in the USA Most orders are shipped within 1 business day after payment is received. International buyers should request a shipping quote before bidding(postage on orders shipped out of the USA can be expensive) Shipping quotes do NOT include any Customs fees or duties. Please contact your local Post Office to determine the amount if any of import duties. Payments: I accept Paypal. Returns: Items may be returned for any reason. You have 30 days starting when you receive the item to indicate your intention to return the item. Can't find what you're looking for in the currently listed items? Take a look at the page to see a list ... moreof items in the process of getting listed. Click on to see more details on return polices. If you have any questions send an email or click on. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Machinists 2 1/2 Tilting Drill Press Vise Palmgren Clone in great Shape
This is a super quality JAPANESE clone of a Palmgren It works perfectly. There are 2 small dings from over agressive drilling but they effect zero Tlts beautifully with ZERO slop. PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action ... morewith no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat
|
|
|
2-1/2" Machine Vise, Tilting, Floating Head
Machine vise. 2-1/2" capacity, titlts up, has 2 floting heads to hold odd shapes. Is used but in good condition. Check out my other auctions. Will combine shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE LION PRECISION TILTING MACHINISTS VISE TOOL 3 1/2" JAWS
NICE LION TILTING PRECISION MACHINISTS VISE TOOL 3 1/2" JAWS 10" LONG. VERY NICE LION PRECISION TILTING MACHINISTS VISE TOOL 3 1/2" JAWS AND BASE IS 10" LONG TO MOUNTS WELL MADE AND STURDY ENOUGH FOR ANY TASK VERY GOOD CONDITION USED A FEW TIMES I AM A EBAY SELLER WITH A 100% FEEDBACK RATING. I AM MORE THAN HAPPY TO WORK WITH YOU. MOST OF MY AUCTIONS I DO OFFER REFUNDS.I WILL REFUND YOU THE COST OF THE ITEM BUT NOT THE SHIPPING COSTS. IT WILL BE LISTED WHEN I DO NOT.THAT WILL BE DO TO A LARGE ITEM. HEAVY ITEMS,OR LISTINGS THAT TAKE ALOT OF TIME TO LIST. SUCH AS MULTI- PIECE MIXED LOTS. IF YOU ARE DISSATISFIED FOR ANY REASON WITH YOUR PURCHASE. I ASK THAT YOU PLEASE CONTACT ME FIRST! AND I'M SURE WE CAN WORK THINGS OUT! I URGE YOU TO READ MY FEEDBACK.TO SEE THAT I PRIDE MYSELF ACCURATE DESCRIPTIONS AND QUICK SHIPPING. ... morePLEASE MAKE SURE YOU REALLY WANT AN ITEM BEFORE YOU BID ON IT. FEEL FREE TO ASK ANY QUESTIONS ALL ITEMS ARE FROM PET FREE AND SMOKE FREE HOME! ~~~WE VALUE OUR CUSTOMERS AND REALLY APPRECIATE YOUR BUSINESS~~~* THANK YOU! For more great items! PAYMENT WITHIN 7 DAYS IS GREATLY APPRECIATED! IF YOU CANNOT MAKE PAYMENT WITHIN THAT TIME FRAME PLEASE JUST TAKE A MOMENT AND SEND ME A MESSAGE AND I WILL BE HAPPY TO WORK WITH YOU. ~~~~COMMUNICATION IS KEY!~~~~ ONCE I SEND A SECOND INVOICE AND IT IS PAST 14 DAYS AND YOU HAVE NOT PAID OR CONTACTED ME. I WILL HAVE TO REPORT THE ITEM AS UNPAID. THIS IS IN ORDER TO HAVE THE FEES I WAS CHARGED FOR THE ITEM REFUNDED AND TO BE ABLE TO RE-LIST! SO IF YOU WANT THE ITEM AND CANNOT PAY RIGHT AWAY IT IS VERY IMPORTANT THAT YOU COMMUNICATE WITH ME. SO YOU DO NOT MISS OUT ON THE ITEM, OR RECEIVE AN UNPAID MARK ON YOUR ACCOUNT! I USUALLY ASK FOR 3 DAYS TO PACKAGE AND SHIP ITEMS. BUT 99% OF THE TIME MY PACKAGES ARE READY AND SHIPPED WITHIN 1-2 BUSINESS DAY OF YOUR PAYMENT CLEARING! IF IT IS AN EXTREMELY LARGE OR DIFFICULT ITEM TO PACKAGE I WILL STATE A LONGER PROCESSING TIME. BUT IT SHOULD NEVER BE OVER 3 DAYS! I DO SHIP INTERNATIONALLY.
|
|
|
ERON TILTING MACHINIST VISE-TOOL & DIE MAKER -DRILL PRESS 2 1/2" JAW USED COND.
A SMOOTH WORKING ERON MACHINIST TILTING ANGLE VISE-2 1/2" JAWS OPEN TO 2 1/2"JAWS ARE 1 1/2" TALL- JAWS ARE IN GOOD CONDITION-PLEASE SEE ALL PICTURES AND JUDGE FOR YOURSEF-FAST-FREE-PRIORITY MAIL-SHIPPING-TO U.S.
|
|
|
VINTAGE DELTA 1026 MACHINISTS TILTING VISE, 2-1/2in., MILLING, DRILL PRESS
ESTATE FIND Vintage DELTA 1026 Machinists Tilting Vise. 2-1/2in wide and 2-1/2in opening. Used for milling, drill press and bench work. Will tilt up to 90 degrees. Tilt is locked in with a wrench. The vise is clean and in nice shape. There is some minor rust on the sides. PAYMENT: Payment by Paypal or cash on pick-up. International buyers. Please don’t ask me to falsify the customs documents. SHIPPING: Domestic shipping based on weight. I will ship First Class Mail. Otherwise the buyer may use Parcel Select, Priority Mail or UPS. International Sales any item sold for 50 dollars or more will be shipped by Priority Mail so that it may be insured and/or tracked. We do offer reduced combined shipping charges on multiple listings whenever they can be packed together without the possibility of damage. REFUND POLICY: I describe the item as accurately ... moreas I can. If there is a error. Please contact me within 14 days of receipt of the item and I will provide a refund less shipping costs. Also, with International shipments, I have no control over delays in delivery or customs. Buyer is responsible for any custom fees. Thank you. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ALL PURPOSE TILTING MILLING MACHINE VISE - 2 1/2 "
aims ALL PURPOSE TILTING MILLING MACHINE VISE- 2 1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Milling Machine Vise in good condition. Specifications: Jaw Length: 2 1/2" Jaw Height: 1 1/2" Max Opening: 2 1/2" Overall Dimensions: 4" x 8" x 4 tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ALL PURPOSE TILTING MILLING MACHINE VISE- 2 1/2" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Craftsman 2-1/2" Tilting/Angle Drill Press/Milling Machinist Vise
This is a nice Craftsman tilting/angle machinist vise for milling or drilling. The jaw width is 2-1/2" and the max opening is about 2-1/2" Doesn't appear to have been used much. Very clean for its age and the ja ws have no wear. Some of the Craftsman label has peeled off. Made in the USA. Shipping will be $10.75 sent Priority mail in the US only. Thanks for looking.
|
|
|
Vintage 2.5" PALMGREN ANGLE MACHINIST VISE No. 00 Chicago Tool Co. USA Tilting
Palmgren Heavy Duty Vintage Angle Machinist Vise No. 00. Made By Chicago Tool& Eng. Co. Tilts 0-90 Degrees. Jaws Are 2.5" Wide And Open Up To 2 5/8" Vise Operates Smoothly and as intended. preowned and in very good condition. Please view all photos and feel free to ask any questions.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141f54839d6-0x103-
|
|
|
Vtg-CRAFTSMAN-Angle/Tilting 2-1/2" Machinists / Drill Press - Work Holding Vise-
Vintage CRAFTSMAN 2-1/2" Tilting Machinists- Drill Press Vise- Price Includes Shipping! We have for your consideration a Vintage CRAFTSMAN- 2-1/2" Machinists/ Drill Press- Work Holding Vise in average overall working condition. The vise turns freely- opens to an absolute max of 2-1/2 inches and seems to work the way it is supposed to. I do not see any obvious cracks/ breaks or repairs. You are seeing the vise pretty much just the way we got- will need cleaning. P le ase refer to the pictures for measurements. The vise jaws measure 2-1/2" in width- opens up to 2-1/2" The vise measures right at 9" in overall closed length. 3-1/2" in height and weighs 8-1/2 lbs! What can we say- please take a good/ close look at all( 12) pictures- please note: there are no other items and/or attachments of any sort included in the ... moresale- what you see is what you are getting" Normal 0 false false false EN-US X-NONE X-NONE The vise is used and in average overall vintage working condition. The vise shows wear- scratches/ scuffs/ marks/ hammer strikes/ grease residue and drilling marks- see pics) we only mention this for accuracy as it does not detract from the usefulness of the vise. Normal 0 false false false EN-US X-NONE X-NONE Just a reminder: what you see is what you will be getting- and once more- Price Includes Shipping! Please note: vise may be partially dis-assembled for shipping- easily re-assembled. Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your item purchased will be shipped to the same address you listed
|
|
|
Vintage 2 1/2" Machinist Vice Tilting Angle Machinist Vice
Vice is in good condition. Shows typical wear from use over the years. includes'mini-hands' wirh adjustable clips.
|
|
|
PALMGREN 2-1/2" 0-90 DEGREE TILTING VISE
Made in the U.S.A. by Palmgren. This is a 90 Degree Tilting Vise. SPECIFICATIONS: Jaw Width: 2-1/2" Jaw Height: 1-1/2" Maximum Jaw Opening: 2-1/2" Tilt Range: 0- 90 degrees. Overall Dimensions: 10" x 4-1/4" x 3-1/2" high. Comes exactly as shown in pictures. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14454fd0f1f-0x10d-
|
|
|
TILTING 3 1/2 " MILL / DRILL PRESS VISE 90 DEGREES
TILTING 3 1/2" MILL/ DRILL PRESS VISE 90 DEGREES Size: 3 1/2 x 1 1/2 Opening 3 1/2" Dimensions: 11 x 5 1/2" Degrees: 90* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
REFINISHED: Vintage Craftsman Tilting Drill Press Vise Machinist Mill 2 Axis
This Craftsman Drill Press vise has 2 1/2" x 1 1/2" hard steel jaws which open to a distance of 2 1/2" The vise weighs in at just under 9 1/2 Lbs. which is beefy for a vise this size. Completely closed the vise is 9" Long. It stands 3 1/2" tall and is 4" wide. It is definitely well made. Everything works wonderfully smooth on it. No issues at all. There is one battle scar on it when somebody's drill bit went a tad to far. You can see this in the very last photo of the gallery. The fact that a vise this age has only one hole in it is pretty much amazing in my book. This vise came from Craftsman's Crown Logo era which screams out the 1970's to me. The decal was trashed along with the paint so it came off too. The word Craftsman is stamped into the side however. Although in terrific physical condition ... morethis vise was dirty and the paint was wasted from decades of being in a shop environment. It needed a complete makeover with nothing spared. That's what it received too. I stripped it down. Chased all the threads, both female and male, with taps& dies. I left most of it bare because of the nature of the work these kinds of vises see however the base was sprayed with satin black enamel which was baked on and should hold up decently well. All of the machined surfaces were given extra attention to make sure they're precisely smooth and perfectly fitting. The jaws are in outstanding condition showing only very light signs of use. All of this shows when you go to use this vise, you'll never regret having it I promise. I sincerely hope you enjoy using this beautiful vise. Please examine all the large photos to see exactly what you can expect to receive and let me know if you have any questions. The auction is 7 days. Starts at $0.99 and has No Reserve. Payment is by PayPal only. Will ship via Priority Mail with Delivery Confirmation. Payment requested within 3 days of auction end. If you need longer just contact me and let me know. If you have zero, negative or no rec
|
|
|
Wilton 11700 2" Super Precision 3-Axis Tilting Machine Vise Needs TLC
This is a wonderful little wilton 2" TLT/SP50 vise. Has some bumps and bruises, but the only mechanical issue is one of the top angle holding plates is missing it's pin, and the screw has been threaded incorrectly, probably needs to be tapped to a larger machine screw, although it still holds the angle ok, as is. The jaws work great, but are a little tight, I'm not sure how to remedy that, or maybe it's the way they're supposed to be. I picked it up at an auction. Got a great deal, ready to pass it on to someone that can take care of it and put it to some good use, at a fraction of it's original cost. If you have any questions about an item. Please message me through eBay, I do my best to take photo's that show any defects or damage to items, so please view all photos before bidding/buying. I only ship internationally ... morethrough the EBay Global Shipping program. If your country is included in the program for this item, please feel free to bid or buy. Please ensure this item will work for your needs. Return shipping, due to incompatibility issues, will be buyers responsibility. Please contact me before returning any items. So I can issue a return number and be watching for the item. I will issue returns via PayPal within 3 days of return item being back in my possession. As a small seller. All my feedback is important to me, I don't hold your feedback"hostage" when you pay, you have completed your end of the deal, if I have upheld my end, to your satisfaction, please consider leaving me a positive seller rating, as it helps with me getting my money from PayPal quicker. Please contact me if for any reason you feel I have misrepresented this item in any way and I will endeavor to make it right for you. Thanks for looking! Posted with
|
|
|
Craftsman 5241 Hexagon tilting Swivel VISE Machinist Bench Rotating Hex 3 1/2
Craftsman 5241 Hexagon tilting Swivel VISE Machinist Bench 3 1/2" wide jaws Very Rare and hard to find. This would be a very nice vise to restore. Collect. All screws move smoothly, tighten amd the vise works like new. There are small nicks and dings as can be seen in the pictures. The screw and nut are in very good condition. There are no breaks. Cracks, or repairs. No welds. Craftsman 5241 Universal Bench Vise from late 30's-early 1940's. 3 1/2" jaw width. 4" max. opening. 32 lbs. Approx. 13" nose to tail,closed. No damage, cracks or abuse. Smooth operation in all modes and solid lock up. This is a very well made old vise in exceptional condition with NO slop or undue wear. 1 1/2" Hex shaft, Removable jaw inserts, pipe and disc holding jaws. Large square head base pivot bolt.Rotates 360 degrees smoothly ... moreand locks in any position with cylindrical collet. Acme thread and swivel base locks positively into unique scallops with mating screw. Considerable overall age darkening. A very unusual, stout, well kept vise that will clean up easily or used as is. The 52xx model number series and angular body style& rounded mainscrew nose coincides with other 1940ish Craftsman small vises but I have never located this universal model in the catalogs. Please feel free to ask any questions. Shipping will be 15.80 in U.S. and extremely well packed/swaddled/cushioned. It is 13" long. 6 3/4" wide, 7 1/8" high. I think 4" would be the max this vise could clamp. It will open farther. Weighs 32 lbs. Scroll Down to see All Pictures What you see in the pictures is what is up for auction. I will combine winning auctions to save you $$$ on shipping. I do not overcharge on shipping. You will not be disappointed. Please check the pics Please ask me and I will try and answer any of your questions Please check my other auctions. Bid now because you do not want to miss this deal. Good Luck and check my other auctions. I only charge Actual costs for shipping. Please check my Excellent Ra
|
|
|
ERON 2-1/2" Tilting Drill Press Vise with Rotary style Base
A local company is in the process of relocating its machine shop facility. As a result. Any surplus-duplicate-unused tools will be designated for disposition. These items will be from either the machine shop or the prototype shop, and they all appear to be in good condition. Sale is final so please feel free to ask any questions that you might have and I will do my best to provide an accurate answer. Offered here is a 2-1/2" ERON heavy duty drill press vise. The Vise tilts and it also has a rotary base. It looks to be in nice condition.
|
|
|
Small 1-1/2" Palmgren Tilting Drilling Vise Older VGCondition Machinist
Small 1-1/2" Palmgren Tilting Drilling Vise Older VGCondition Machinist@ very light owners stamps- very hard to see. This is in clean. Undoctored, Crisp original condition no signs of breaks or repair Original finish Really a good example. I will combine shipping on multiple purchase- and will invoice at end of auction.
|
|
|
Vintage Craftsman Tilting Drill Press Vise Machinist Mill 2-1/2" BEAUTY
Vintage Craftsman Tilting Drill Press Vise Machinist Mill 2-1/2" BEAUTY inscribed on handle
|
|
|
3 1/2" machinists drill press tilting or adjustable angle vice
Good condition. Weighs 14 pounds. Shipped in less than 15 hours)
|
|
|
WILTON 25A DRILL PRESS ANGLE/TILTING MACHINIST VISE -USED- 2-1/2 JAW OPENING
FOR SALE Wilton 25A Angle/Tilting Machinist Vise. This item is very nice used condition and the jaws operate smoothly. The buyer pays actual shipping charges. In the event I over-estimated the shipping costs I will return the overpayment to the buyer.
|
|
|
PRECISION TILTING 2-1/2" JAW MILLING VISE
Precision Tilting Milling Vise Jaws Measure 2-1/2" x 1-7/8" 2-3/4" Max Opening Tilts 0 to 90 degrees Base Measures 7-1/2" x 3-1/2" Made in Taiwan No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction ... moreend notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Palmgren Tilting Angle Machinist Vise 2-7/16" Wide Jaws Opening to 2-5/8"
Palmgren Tilting Angle Machinist Vise 2-7/16" Wide Jaws Opening to 2-5/8"
|
|
|
PAIR OF TOOL MAKERS VISES PALMGREN TILTING 2-1/2" JAWS FOR PARTS OR REPAIR
Pair of Precision Tool Makers Vises 2-1/2" x 1-1/2" Jaws Palmgren Tilting Vise Model No. 00 Measures 8" x 3-1/2" Overall Unknown Measures 6-1/2" x 2-1/2" Overall For Parts or Repair! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced ... moreby us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
NICE PALMGREN NO. 0 2 1/2" 90 DEGREE TILTING MACHINE VISE
NICE PALMGREN NO. 0 2 1/2" 90 DEGREE TILTING MACHINE VISE Size: 2 1/2 X 1 1/2" Opening: 3" Degree: 90* Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
PALMGREN 2-1/2" JAW TILTING PRECISION MILLING MACHINE VISE
Palmgren Precision Tilting Milling Machine Vise 2-5/8" Max Opening Jaws Measures 2-1/2" x 1-1/2" Tilts 0 to 90 degrees Base Measures 4" x 7" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced ... moreby us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
2-7/8" PRECISION TILTING TOOL MAKERS VISE GRINDING VISE
WORKS FINE NICE VISE OPENS UP TO 3-5/8"
|
|
|
PALMGREN NO. X 1 90 DEGREE TILTING MACHINIST VISE 1 1/2" JAWS
PALMGREN NO. X 1 90 DEGREE TILTING MACHINIST VISE 1 1/2" JAWS In very good condition Overall length is 5 3/4" base) Jaws open to 1 3/4" max Jaws in very good condition Previous owner painted or renewed the-japanning Screw turns very smoothly and jaws line up perfect Weighs 3 1/2 lbs
|
|
|
2-1/2" Tilting Sine Vise Jaws Open 2-1/2"
Up for sale here is a 2-1/2" Tilting Sine Vise Jaws Open 2-1/2" Feel free to ask any questions. SCT140821-06
|
|
|
VINTAGE MACHINIST CRAFTSMAN TILTING ADJUSTABLE ANGLE VICE VISE PRECISION 2 1/2"
VINTAGE MACHINIST CRAFTSMAN TILTING ADJUSTABLE ANGLE VISE PRECISION 2 1/2" JAWS ☞- Please carefully read item description and view all of the photos bellow prior to bidding. Description: Craftsman adjustable angle machinist vise. This vise has 2 1/2" wide jaws and opens to just over 2 1/2" Overall length is appx 12" and width is 3.5" There is a number on the casting of 2754-3. About the item: Good working condition. Very minor surface rust spots. NOTE- it does have the previous owner engraved at the bottom and top. May Have Insignificant Scuffs. Scratches, Associated With Regular Use. Anything else not mentioned is not included* ★ USA ONLY! ★ Shipping Items will be shipped within 1 business day of receipt of payment. Shipping generally takes 2-10 business days once item is delivered to the carrier. We do not make ... moreany guarantees on the shipping time frame from the USPS. All time frames listed on eBay are only estimates. All Packages will receive tracking number. Terms Of Sale Please Do not tarnish our feedback record; Please contact us thru EBAY, We answer your questions very quickly. We work hard to have every customer satisfied. Thank you for your understanding! Refunds Buyer is responsible to pay for return shipping and we will refund your payment less the original shipping and handling cost. unless it was our fault. In that case we refund everything plus return charges) Combined Shipping We will combine shipping | We will credit your paypal account for any over payment. Risk free bidding* 100% SATISFACTION or your money back guarantee! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PALMGREN NO. 00 TILTING DRILL PRESS VISE 2 1/2" X 1 1/2"
PALMGREN NO. 00 TILTING DRILL PRESS VISE 2 1/2" X 1 1/2" Size: 2 1/2 x 1 1/2" Opening: 2" Model# 00* Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
Palmgren Tilting Swivel Base 2 1/2" Machinist Vise
Auction Wizard 2000 Listing Template- AW2KLOT#9636 Palmgren Tilting Swivel Base 2 1/2" Machinist Vise Good used condition. Jaws open and close smoothly. No damage to threads. Tilts and swivels properly 2 1/2" wide jaws line up properly. 2 1/2" capacity. Missing a nut on the pivot bolt as shown.
|
|
|
3 1/2" machinist drill press adjustable tilting and angle vise
This is a 3 1/2" adjustable drill press vise. It works good but could use a cleaning. It has been in a workshop. Pictures show condition
|
|
|
Palmgren Vise-2 1/2" x 2 1/2" Jaws-Swivel Tilting Compound Angle Machinist Vise
Description Excellent used Palmgren Vise-2 1/2" x 2 1/2" Jaws-Swivel Tilting Compound Angle Machinist Vise 9611253 Angle Vise Check out my other items! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. ... moreOur shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival in your country. All Sale
|
|
|
used machinist drill press tilting vise mill vise work hold tool 3 1/2'' jaws
for auction is a very good condition machinist vise. It is in barely used condition. There is no evidence of user wear and tear. The jaws are 3 1/2' wide. The maximum opening is 3' The only apology is the few spots of rust and corrosion in various areas due to poor storage. I see no manufacturers name or marks. The vise opens and closes in a smooth fashion. there is no loose parts or play. It is a good user machinist tool. It is a hefty vise. The vise weighs over 11 pounds. Please see pictures for condition. ask questions before you bid. buyer pays shipping and delivery confirmation usps priority mail. thanks for looking.
|
|
|
Palmgren Industrial Angle Vise-Tilting Adjustable-Jaws 6 1/4" x 2" Deep Opens 4"
Description Very Good used Palmgren Industrial Angle Vise-Tilting Adjustable Jaws 6 1/4"wide x 2" Deep Opening 4" Has a chip on the slide see pic. Check out my other items! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships within the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping ... moreis only offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or call to get your questions answered. International buyers you are responsible for your Custom. Tariff and Duty Fees upon arrival
|
|
|
Drill Press Vice, 90 Degree Tilting, 2-7/8" Jaw Opening
Great Little vice. Jaws are 2-1/2" wide. And open 2-7/8" 90 degree tilt. Mounts are 7" on center. Weighs just over 7lbs. Vice is a little dirty, no rust, and works smoothly.
|
|
|
Vintage Tilting Machinist's Angle Compound Vise ~ Opens to 2+ inches
Vintage Machinist's Tilting Compound Angle Vise in good condition. Looks to be machinist made as I can find no maker's mark. Looks a lot like a Palmgren. Has the initials'PM' etched onto it. For sure the owner and possibly the maker. Measures 10" long by 5" wide. Quite heavy. Weighing in at around 10.5 lbs. Opens to just over 2" Angles to 90 degrees and any angle in between. Found at auction. Cleaned it up some but it could still use a good cleaning. If you're a Machinist in need of one of these. This is a nice one to add to your Collection. Thanks for looking.and Good Luck.
|
|
|
Palmgren 2 1/2" Swivel Tilting Compound Angle Milling Drill Press Machinist Vise
This is a Palmgren multi position compound angle milling/drill vise. It swivels and tilts horizontally and vertically. It's in really nice used condition. It has had some fasteners replaced and it is cleaned. Lubed and ready to work. It has one shallow errant drill hole. This is a really useful, versatile, vise. Free shipping to the lower 48.
|
|
|
2-1/2" Tilting Sine Drill Press Vise w/ Swivel Base Jaws Open 2-1/2"
Up for sale here is a: 2-1/2" Tilting Sine Drill Press Vise*Swivel Base*Jaws Open 2-1/2" Feel free to ask any questions. SCT141106-03
|
|
|
Palmgren #X0 Drill/Mill 0 to 90 Degrees Tilting Vise 1-1/2" Wide 1-1/2" Opening
Here is a Palmgren#XO Drill/Mill Vise. It will Tilt from 0 to 90 Degrees. It will Open up 1-1/2" and has Jaws that are 1-1/2" Wide. It Open. Close's and Tilt's freely with No Slop. There is some Metal Staining on the Jaws as you can see in the Pictures. This was Picked up at a Machinist Estate Sale. This is being Sold as Is as Found. LIST OF TERMS AND CONDITIONS" All items I offer are old. Antique, collectible, used and sometimes abused and not new unless specified in the description. So please keep this in mind and have fair expectations. The pictures are part of the description. ALL ITEMS ARE SOLD AS IS AS FOUND" I do my best to describe all items well. I do my best to take good pictures.That said.If you're not sure about something please asks Questions(BEFORE) bidding. I will be more than happy to answer ... moreany questions to the best of my ability or send you more pictures of an item. I always leave cleaning and(repairs) if needed to the new owners. Payment 3 Days From End Of The Listing. Shipping Charges are for the Lower 48 States. Alaska& Hawaii Shipping are Quoted before Invoicing. INTERNATIONAL BIDDERS All International Shipments will be Shipped by E Bay's Global Shipping Program Only. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
|
|
|
Palmgren #000 Drill/Mill 0 to 90 Degrees Tilting Vise 2-1/2" Wide 2-1/2" Opening
Here is a Palmgren#000 Drill/Mill Vise. It will Tilt from 0 to 90 Degrees. It will Open up 2-1/2" and has Jaws that are 2-1/2" Wide. It Open. Close's and Tilt's freely with No Slop. There is some Metal Staining on the Jaws as you can see in the Pictures. This was Picked up at a Machinist Estate Sale. This is being Sold as Is as Found. LIST OF TERMS AND CONDITIONS" All items I offer are old. Antique, collectible, used and sometimes abused and not new unless specified in the description. So please keep this in mind and have fair expectations. The pictures are part of the description. ALL ITEMS ARE SOLD AS IS AS FOUND" I do my best to describe all items well. I do my best to take good pictures.That said.If you're not sure about something please asks Questions(BEFORE) bidding. I will be more than happy to answer ... moreany questions to the best of my ability or send you more pictures of an item. I always leave cleaning and(repairs) if needed to the new owners. Payment 3 Days From End Of The Listing. Shipping Charges are for the Lower 48 States. Alaska& Hawaii Shipping are Quoted before Invoicing. INTERNATIONAL BIDDERS All International Shipments will be Shipped by E Bay's Global Shipping Program Only. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
|
|
|
NICE ! WILTON TLT SP 50 2 " TILTING MACHINE VISE
NICE! WILTON TLT SP 50 2" TILTING MACHINE VISE Model No. TLT SP 50 Size: 2 X 1" Opening: 2" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
Vintage Tilting angle machinist vise drill press, opens to 2 3/4" Free Shipping!
Description Vintage Tilting angle machinist vise drill press. Opens to 2 3/4" Free Shipping! If you have any further questions or comments please feel free to contact me. We COMBINE SHIPPING whenever possible so check out our other auctions. Thanks for stopping by! Payment Payment is appreciated within 24 hours. If payment is not recieved within 7 days from the time the auction ends you will be notified from ebay when I file a non-payment claim and the item will be relisted or offered to the next highest bidder. If you cannot meet this deadline for any reason please contact me and we can work it out. Shipping I will ship your items within 1 business day of recieving cleared payment. WE COMBINE SHIPPING WHENEVER POSSIBLE! All items sold with a final price of $250 or higher must go Priority Mail. Insured with signature confirmation. Domestic ... moreShipping Quote is for continental U.S. Only. All others must contact us before bidding for a quote. Thanks! Contact Us We prefer to be contacted through the ebay message board
|
|
|
3 1/2'' TILT / TILTING VISE,IN GREAT CONDITION,MACHINIST VISE
OFFERED IS A 3 1/2' TILTING VISE.MACHINIST VISE.IN VERY GOOD CONDITION NO RUST,THANKS FOR LOOKING.
|
|
|
PALMGREN 2-7/16" Tilting Machinest Vice; Jaws open to 2-5/8"
Very clean 2-7/16 PALMGREN machine vice with nice smooth tilt and slide. Please feel free to ask any questions you may have as
|
|
|
NICE ! CRAFTSMAN 2 1/2 " TILTING MILL / DRILL PRESS VISE
NICE! CRAFTSMAN 2 1/2" TILTING MILL/ DRILL PRESS VISE Size: 2 X 1 1/2" Opening: 2" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
PM 2-1/2" JAW TILTING SWIVEL BASE DRILL PRESS MACHINE WORK VISE MADE IN JAPAN
A NICE 2-1/2" X 2-1/2" JAW TILTING FEATURE WITH SWIVEL BASE DRILL PRESS MACHINE-WORK VISE MADE BY PM COMPANY JAPAN. SWIVELS ARE FULLY GROUND. HARDENED AND GROUND JAW. WHICH IS ALSO GROOVED TO HOLD ROUNDS, VISE WITH 90-DEGREE TILT AND 360-DEGREE SWIVEL. SWIVEL BASE HAS 4 BOLT HOLES FOR MOUNTING ALSO CAN REMOVE SWIVEL BASE AND VISE SELF HAS 2 BOLT HOLES FOR MOUNTING AS WELL AS JAB NEEDS. USED AND IN GREAT WORKING CONDITION. NO RESERVE, FLAT-RATE SHIPPING IN USA.
|
|
 |