Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Shank Diameter: 3.175mm / 1/8"Cutting Diameter: 1.5mm / 0.06"Cutting Edge Length: 12mm / 0.47"Overall Length: 38mm / 1.5"Material: Carbide ... more(Tungsten Steel)Number of Flutes: Single FluteStyle: Left HandHardness: 45-48HRCPackage Content: 1pcs x End Mill Router BitDescriptions:Suitable for engraving, cutting, carving, milling, slotting, sculpturing in MDF, ABS, PVC, PP, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.Made of carbide (tungsten steel), the end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, ensures high work efficiency.Spiral chip space design for fast and clean chip removal.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Shank Diameter: 12.7mm / 1/2"Cutting Diameter: 35mm / 1-3/8"Cutting Depth: 4mm / 5/32"Cutting Length: 11.15mm / 7/16"Overall Length: 52mm / 2-1/16"Style: ... more4 Wing Slotting CutterMaterial: Carbide Tip, 45# Carbon Steel BodySurface Treatment: Spray CoatingPackage Content: 1pcs x T Slot Cutter Rabbet Router BitDescriptions:Rabbet router bit can be adjusted to achieve the desired depth and width of the slot or rabbet. Great replacement router tool for woodworking carpenters. Rabbets are used for joining pieces together or for inserting panels, glass, or other materials into a frame.Sharp carbide tip is hard, durable, and heat-resistant for precise, clean cuts. Spray coating has a smooth, even surface that resists rust and corrosion. 45# carbon steel body, high strength, durability and good wear resistance.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Edge Diameter: 2.5mm / 0.098"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 12mm / 0.47"Overall Length: 37mm / 1.46"Milling ... moreDirection: Right HandMaterial: G05 Tungsten CarbideFinish: Titanium CoatedStyle: Corn ShapePackage Content: 4pcs x End Mill Router BitsDescriptions:G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Shank Diameter: 3.175mm / 1/8"Tip Size: 1mm / 0.039"Cutting Angle: 30 DegreeFlute Length: 12mm / 0.47"Total Length: 27mm / 1.06"Material: ... moreSolid Carbide (Tungsten Steel)Package Content: 2pcs x Engraving Router BitDescriptions:Sharp edge provides smooth cutting, no glitches. 1/8" (3.175mm) shank fits most small rotary tools and grinders when finishing, grinding, and shaping the work with precision. The deep angle and sharp point allows for precise details.Can be used for carving, cutting, milling, slotting, 2D or 3D sculpturing, surface machining, etc. Suitable for engraving MDF, ABS, PVC, wood, plywood, hardwood, double color boards, acrylic, nylon, plastic, etc..Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect.
Buy It Now
Free Shipping Condition: New Location: New York, United States ✔ Cut decorative V-Grooves and lettering on signs with these V-Groove bits. Use with an edge guide to chamfer and bevel edges. ✔ Cuts all composition ... morematerials, plywoods, hardwoods, and softwoods. Each bit is manufactured from high quality steel for added durability and long life.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Shank Diameter: 3.175mm / 1/8"Tip Size: 0.3mm / 0.012"Cutting Angle: 20 DegreeFlute Length: 14mm / 0.55"Total Length: 27mm / 1.06"Material: ... moreSolid Carbide (Tungsten Steel)Package Content: 4pcs x Engraving Router BitDescriptions:Sharp edge provides smooth cutting, no glitches. 1/8" (3.175mm) shank fits most small rotary tools and grinders when finishing, grinding, and shaping the work with precision. The deep angle and sharp point allows for precise details.Can be used for carving, cutting, milling, slotting, 2D or 3D sculpturing, surface machining, etc. Suitable for engraving MDF, ABS, PVC, wood, plywood, hardwood, double color boards, acrylic, nylon, plastic, etc..Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect.
Buy It Now
Free Shipping Condition: New Location: Lawrenceburg, United States Freud 75-106 3/8" Up Spiral Router Bit Combines effective chip removal with a cut unmatched by standard straight bits, Computer-designed flutes provide ... morechip removal required in production settings, Suited for cutting mortises and routing deep blind holes, Excellent for grooves and dadoes in all composite materials. Plywoods, hardwoods and softwoods, Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers, Cutter Diameter: 3/8" Carbide Height: 1-1/4" Overall Length: 3" of Flutes: 2, Shank Diameter: 1/2"
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Setup Blocks Woodworking Tools - 15-Piece Gauge Block Set with Precise. Multiple Sizes: The setup blocks height gauge set has 15 setup blocks with different ... moresizes and high flatness:1/16 ", 3/32", 1/8 ", 5/32", 3/16 ", 7/32", 1/4 ", 5/16", 3/8 ", 7/16", 15/32 ", 1/2", 23/32 ", 3/4", 1x2x3 ".
Buy It Now
Free Shipping Condition: New Location: China Specifications:Shank Diameter: 3.175mm / 1/8"Tip Size: 0.2mm / 0.008"Cutting Angle: 90 DegreeFlute Length: 14mm / 0.55"Total Length: 27mm / 1.06"Material: ... moreSolid Carbide (Tungsten Steel)Package Content: 2pcs x Engraving Router BitDescriptions:Sharp edge provides smooth cutting, no glitches. 1/8" (3.175mm) shank fits most small rotary tools and grinders when finishing, grinding, and shaping the work with precision. The deep angle and sharp point allows for precise details.Can be used for carving, cutting, milling, slotting, 2D or 3D sculpturing, surface machining, etc. Suitable for engraving MDF, ABS, PVC, wood, plywood, hardwood, double color boards, acrylic, nylon, plastic, etc..Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect.
Buy It Now
$35.92 Shipping Condition: New Location: China Chuck models: K12-100MM 4 Jaw Centring Chuck. However, we will try our best to minimize it. Step angle: 0.3 degree/step.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Diameter: 6mm / 0.24"Cutting Flute Length: 15mm / 0.59"Shank Diameter: 6mm / 0.24"Overall Length: 50mm / 2"Material: Solid Carbide ... more(M30 Carbide)Finish: AlTiN CoatedCutting Hardness: HRC55Number of Flutes: 4 FlutesEnd Cut Type: Square EndSpiral Angle: 35 DegreePackage Content: 1pcs x Square Nose End MillDescriptions:M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Welcome to our store, we have high-quality pre-sales and after-sales service. Before you buy this Item, you can contact us if you have any questions, ... moreand we will answer you in time. I wish you all the best.
Buy It Now
Free Shipping Condition: New Location: China Specifications:Cutting Radius: 1.5mm / 0.06" Cutting Diameter: 3mm / 0.12" Cutting Flute Length: 7mm / 0.28"Shank Diameter: 6mm / 0.24"Overall Length: ... more45mm / 1.8"Milling Angle: 30 DegreeMaterial: Tungsten Carbide (HRC92)Finish: UncoatedEnd Cut Type: Ball EndNumber of Flutes: 2 FlutesCutting Hardness: HRC42 (Max.)Spiral Flute Angle: 35 DegreePackage Content: 1pcs x Tapered Ball Nose End MillDescriptions:Made of 0.6um micro-grain tungsten carbide, the end mill has higher hardness (HRC92) and strength, better wear resistance and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for milling and cutting of stainless steel, carbon steel, malleable cast iron, alloy steel, etc. For slot and hole machining.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Cutting Diameter: 1mm / 0.04"; Effective Cutting Length: 10mm / 0.39"; Cutting Edge Length: 3mm / 0.12"Shank Diameter: 4mm / 0.16"; Overall Length: 50mm ... more/ 2"Material: Tungsten Carbide; Finish: AlTiSin CoatedCutting Hardness: HRC55; Package Content: 2pcs x Square Nose End MillDescriptions:Made of super fine grain carbide, the end mill cutter has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.Features square end cut, 4-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
Buy It Now
$1.77 Shipping Condition: New Location: 金东区, China
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Shank Diameter: 3.175mm / 1/8"Cutting Diameter: 3.175mm / 1/8"Cutting Edge Length: 10mm / 0.39"Overall Length: 38mm / 1.5"Material: Carbide ... more(Tungsten Steel)Number of Flutes: Single FluteStyle: Left HandHardness: 45-48HRCPackage Content: 2pcs x End Mill Router BitDescriptions:Suitable for engraving, cutting, carving, milling, slotting, sculpturing in MDF, ABS, PVC, PP, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.Made of carbide (tungsten steel), the end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, ensures high work efficiency.Spiral chip space design for fast and clean chip removal.
Buy It Now
$8.00 Shipping Condition: Used Location: Macedonia All cutters with polished flutes and also with polished clearance. Right-hand rotation – up-cut.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Include: 1 X CNC Z Axis Engraving Machine Tool Specifications: Model : Automatic Tool Setting Color : Black + Silver Material: Grinding 4s+ Superhard ... moreAlloy Output Mode: Normally Closed Normally Closed Specification Technical Parameters Output Mode: Bnc (Normally Closed) Pre-trip: Almost Zero Stroke: 5mm Repeatability: 0.001mm (Condition: Operating Speed 50-200mm / Min) Contact Life: 3 Million Times Protection Structure: IP67 Contact Force: 1.5N Contact Material: Super Hard Alloy Housing Material: Grinding 4S Contact Rating: DC24V 20mA (Max) (Recommended Value 10ma) Resistance Load Cable: 3m Oil Resistant °4 Core ∞5 Tensile Strength 307n Minimum Bending Radius R7 Protection Tube: Minimum Bending Radius 1 M R25 Alarm Signal When the Trip Is Exceeded.
Buy It Now
Free Shipping Condition: New Location: China Specifications:Shank Diameter: 6mm / 0.24"Tip Size: 2mm / 0.079"Flute Length: 25mm / 0.98"Total Length: 43mm / 1.69"Cutting Angle: 30 DegreeMaterial: ... moreSolid Carbide (Tungsten Steel)Package Content: 1pcs x Wood Engraving BitDescriptions:Sharp edge provides smooth cutting, no glitches. 6mm shank fits most small rotary tools and grinders when finishing, grinding, and shaping the work with precision.Can be used for carving, cutting, engraving, milling, slotting, 2D or 3D sculpturing, surface machining, etc. The deep angle and sharp point allows for precise details.Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect. Fast engrave and cut to improve efficiency.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China What is this?The aluminum profile slot cover flat seal fits 2020 Series European standard aluminum extrusion profile 6mm, and is widely used for frame ... morestructure of aluminum extruded profile, like industrial aluminum frame, CNC router, CNC laser cutting machine, 3D printer, 3D engraving machine, robot project, etc.What will I get?The aluminum profile sealing groove cover, we provide here, are in size of:Total length: 5m/16.4ft;Slot width: 6mm/0.24inch;Material: PVC;Color: Orange;In the package of: x aluminum profile slot cover flat seal.Are there any advantages of the product?The slot seal strip is made of premium PVC, which is soft and durable to flatten the grooves and reduce the collision and wear between machine parts, also preventing dust and dirt. Sufficient length make it simple to cut to fit for any seal applications.
Buy It Now
$2.56 Shipping Condition: Brand New Location: The Rocks, Australia This is a handy end mill whose form leaves behind a T-shaped slot or used as a spoilboard cleaner. It features side edges, with 4 flutes to help make ... morethe cutting process stable. 1x T-Slot Cutter. Blade Height: 8mm (5/16").
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification Style: Modern Shape: Rectangular Color: Red+Black Number of Items: 15 Overall Material: Aluminum Alloy Material of Storage Box: Plastic+EVA ... moreSurface Treatment: CNC, Sand Blasting, Oxidation, and Laser Engraving Size of Setup Blocks: 1/16 ", 3/32", 1/8 ", 5/32", 3/16 ", 7/32", 1/4 ", 5/16", 3/8 ", 7/16", 15/32 ", 1/2", 23/32 ", 3/4", 1x2x3 ". Accuracy: ±0.001" Length of Setup Blocks: 3inch/7.62cm Gross Weight: 0.9kg/2lbs Net Weight: 0.8kg/1.76lbs Package Size: 25.5*14.5*5cm/10*5.7*2inch Package Included 15 * Setup Blocks 1* Plastic Storage Case.
Buy It Now
Free Shipping Condition: New Location: China Specifications:Cutting Edge Diameter: 0.4mm / 0.016"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 3mm / 0.12"Overall Length: 37mm / 1.46"Milling ... moreDirection: Right HandMaterial: G05 Tungsten CarbideFinish: Titanium CoatedStyle: Corn ShapePackage Content: 4pcs x End Mill Router BitsDescriptions:G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Diameter: 4mm / 0.16"Cutting Flute Length: 52mm / 2.05"Shank Diameter: 4mm / 0.16"Overall Length: 80mm / 3.15"Material: High Speed ... moreSteelNumber of Flutes: 2 FlutesEnd Cut Type: Ball NosePackage Content: 1pcs x Ball Nose End MillDescriptions:High speed steel end mill has high hardness, good toughness, wear resistance, and good processing performance, ensuring work efficiency. Only the base substrate without any coatings, good for general purpose milling.Features ball nose end cut, 2-flute design. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting.Widely used in side milling, end milling, slotting, hole machining, finishing. Suitable for stainless steel, alloy steel, aluminum, carbon steel, tool steel, copper, plastic, etc..
Buy It Now
Free Shipping Condition: New Location: China Specifications:Shank Diameter: 3.175mm / 1/8"Tip Size: 0.1mm / 0.004"Cutting Angle: 30 DegreeFlute Length: 15mm / 0.59"Total Length: 27mm / 1.06"Material: ... moreSolid Carbide (Tungsten Steel)Package Content: 2pcs x Engraving Router BitDescriptions:Sharp edge provides smooth cutting, no glitches. 1/8" (3.175mm) shank fits most small rotary tools and grinders when finishing, grinding, and shaping the work with precision. The deep angle and sharp point allows for precise details.Can be used for carving, cutting, milling, slotting, 2D or 3D sculpturing, surface machining, etc. Suitable for engraving MDF, ABS, PVC, wood, plywood, hardwood, double color boards, acrylic, nylon, plastic, etc..Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect.
Buy It Now
Free Shipping Condition: New Location: Locust Valley, United States You also need to adjust to a lower feed rate and work at a low angle on the lathe. There are also surprising applications. It's even used in machining ... moreapplications as a washer and an arbor material.
Buy It Now
Free Shipping Condition: New Location: China Specifications:Cutting Diameter: 4mm / 0.16"Cutting Flute Length: 17mm / 0.67"Shank Diameter: 4mm / 0.16"Overall Length: 45mm / 1.77"Material: High Speed ... moreSteelNumber of Flutes: 2 FlutesEnd Cut Type: Ball NosePackage Content: 2pcs x Ball Nose End MillDescriptions:High speed steel end mill has high hardness, good toughness, wear resistance, and good processing performance, ensuring work efficiency. Only the base substrate without any coatings, good for general purpose milling.Features ball nose end cut, 2-flute design. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting.Widely used in side milling, end milling, slotting, hole machining, finishing. Suitable for stainless steel, alloy steel, aluminum, carbon steel, tool steel, copper, plastic, etc..
Buy It Now
Free Shipping Condition: New Location: Minooka, United States GRAINGER APPROVED CDP-G-31 Maintenance-Free Plate Caster,Swivel. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. ... morelaw is prohibited. Grainger Part #:6KJD0. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
Buy It Now
Free Shipping Condition: New Location: China Cutting Depth (change by replacing bearing): 7/16", 3/8", 5/16", 1/4", 3/16", 1/16"Bearings Dia.: 9.52mm / 3/8", 12.7mm / 1/2", 15.9mm / 5/8", 19.05mm ... more/ 3/4", 22.2mm / 7/8", 28.6mm / 1-1/8"Shank Dia.: 6mm / 15/64"Cutting Dia.: 31.7mm / 1-1/4"Cutting Length: 9.5mm / 3/8", 12.7mm / 1/2"Overall Length: 55mm / 2-5/32", 58mm / 2-9/32"Style: 2 Wing (Flutes)Material: YG8/C1/K30 Carbide, 45# Carbon Steel2pcs x Slot Cutter Rabbet Router Bit, 6pcs x BearingsThe router bit can be adjusted to achieve the desired depth and width of the slot or rabbet. Great replacement tool for woodworking carpenters. Rabbets are used for joining pieces together or for inserting panels, glass into a frame.Sharp carbide tip is hard, durable, and heat-resistant for precise, clean cuts. Spray coating has a smooth, even surface that resists rust and corrosion.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Edge Diameter: 2.6mm / 0.102"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 12mm / 0.47"Overall Length: 37mm / 1.46"Milling ... moreDirection: Right HandMaterial: G05 Tungsten CarbideFinish: Titanium CoatedStyle: Corn ShapePackage Content: 4pcs x End Mill Router BitsDescriptions:G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc.
Buy It Now
$2.56 Shipping Condition: Brand New Location: The Rocks, Australia This is a handy end mill whose form leaves behind a T-shaped slot or used as a spoilboard cleaner. It features side edges, with 4 flutes to help make ... morethe cutting process stable. 1x T-Slot Cutter. Blade Height: 8mm 5/16".
Buy It Now
$3.69 Shipping Condition: New Location: China Wood+Steel Leathercraft Stitching Groover Skiving Edger Beveler Leather Working. Ingrown Toe Nail Recover Toenail Correction Tool Pedicure Fixer Straightener. ... more2.4" TFT Display Fully Welded Assembled Digital Oscilloscope With Alligator Clip.
Buy It Now
Free Shipping Condition: New Location: Ocala, United States Because of these properties, Polycarbonate is used in many projects. You are buying ONE piece of POLYCARBONATE 1/8" 48" x 12". We are always willing to ... morework things out.
Buy It Now
Free Shipping Condition: New Location: China Thickening nylon brush, vacuum capacity. Drawer-type vacuum hood, including aluminum brush. 1 x Engraving machine dust cover. MPNDoes Not Apply. We will ... morereply you ASAP. Country/Region of ManufactureChina.
Buy It Now
Free Shipping Condition: New Location: China Shank Diameter: 12.7mm / 1/2"Cutting Diameter: 35mm / 1-3/8"Cutting Depth: 8mm / 5/16"Cutting Length: 11.15mm / 7/16"Overall Length: 55mm / 2-5/32"Style: ... more4 Wing Slotting CutterMaterial: Carbide Tip, 45# Carbon Steel BodySurface Treatment: Spray CoatingPackage Content: 1pcs x T Slot Cutter Rabbet Router BitDescriptions:Rabbet router bit can be adjusted to achieve the desired depth and width of the slot or rabbet. Great replacement router tool for woodworking carpenters. Rabbets are used for joining pieces together or for inserting panels, glass, or other materials into a frame.Sharp carbide tip is hard, durable, and heat-resistant for precise, clean cuts. Spray coating has a smooth, even surface that resists rust and corrosion. 45# carbon steel body, high strength, durability and good wear resistance.
Buy It Now
Free Shipping Condition: Brand New Location: China High efficiency ---- these bits own sharp edge which is for fast engraving that makes high efficiency; durable, high precision and not easy to break; ... moreit is smokeless and burr-free while processing.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Diameter: 4mm / 0.16"Cutting Flute Length: 52mm / 2.05"Shank Diameter: 4mm / 0.16"Overall Length: 80mm / 3.15"Material: High Speed ... moreSteelNumber of Flutes: 2 FlutesEnd Cut Type: Ball NosePackage Content: 2pcs x Ball Nose End MillDescriptions:High speed steel end mill has high hardness, good toughness, wear resistance, and good processing performance, ensuring work efficiency. Only the base substrate without any coatings, good for general purpose milling.Features ball nose end cut, 2-flute design. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting.Widely used in side milling, end milling, slotting, hole machining, finishing. Suitable for stainless steel, alloy steel, aluminum, carbon steel, tool steel, copper, plastic, etc..
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Edge Diameter: 0.4mm / 0.016"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 3mm / 0.12"Overall Length: 37mm / 1.46"Milling ... moreDirection: Right HandMaterial: G05 Tungsten CarbideFinish: Titanium CoatedStyle: Corn ShapePackage Content: 4pcs x End Mill Router BitsDescriptions:G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Edge Diameter: 0.9mm / 0.035"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 6mm / 0.24"Overall Length: 37mm / 1.46"Milling ... moreDirection: Right HandMaterial: G05 Tungsten CarbideFinish: Titanium CoatedStyle: Corn ShapePackage Content: 4pcs x End Mill Router BitsDescriptions:G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Diameter: 2mm / 0.08"Cutting Flute Length: 6mm / 0.24"Shank Diameter: 4mm / 0.16"Overall Length: 50mm / 2"Material: Solid Carbide ... more(M30 Carbide)Finish: AlTiN CoatedCutting Hardness: HRC55Number of Flutes: 4 FlutesEnd Cut Type: Square EndSpiral Angle: 35 DegreePackage Content: 1pcs x Square Nose End MillDescriptions:M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Material: HSS Adjustment Range: 23mm - 26mm Overall Length: 210mm /8.26" Cutting Diameter: 23mm - 26mm/29/32" - 1-1/32" Tool Flute Length: ... more75.3mm / 2.96" Square Shank Size: 12 x 12mm/ 0.47" x 0.47"(L*W).
Buy It Now
$2.56 Shipping Condition: Brand New Location: The Rocks, Australia This is a handy end mill whose form leaves behind a T-shaped slot or used as a spoilboard cleaner. It features side edges, with 6 Flutes to help make ... morethe cutting process stable. Blade Height: 7.5mm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Multiple Sizes: The setup blocks height gauge set has 15 setup blocks with different sizes and high flatness:1/16 ", 3/32", 1/8 ", 5/32", 3/16 ", 7/32", ... more1/4 ", 5/16", 3/8 ", 7/16", 15/32 ", 1/2", 23/32 ", 3/4", 1x2x3 ".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States It Will Be a Good Assistant for Your Work. Multiple Sizes: the Setup Blocks Height Gauge Set Has 15 Setup Blocks with Different Sizes and High Flatness:1/16 ... more", 3/32", 1/8 ", 5/32", 3/16 ", 7/32", 1/4 ", 5/16", 3/8 ", 7/16", 15/32 ", 1/2", 23/32 ", 3/4", 1x2x3 ".
Buy It Now
$1.99 Shipping Condition: New Location: China Flute length(CEL): 5mm. Used on Color plates, acrylic, PVC, plastic, MDF, hardwood. High quality and long lasting.
Buy It Now
$6.46 Shipping Condition: Brand New Location: The Rocks, Australia Total Length: 50mm.
Buy It Now
Free Shipping Condition: New Location: China Yes, we use V-slot accurate aluminum rail and V-type plastic wheels, every axis moving accurate and smoothly, the axis gap can be adjustable and it can ... morekeep machine more stable and accurate move. Can the X axis adjustable?.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Diameter: 2mm / 0.08"Cutting Flute Length: 6mm / 0.24"Shank Diameter: 4mm / 0.16"Overall Length: 50mm / 2"Material: Solid Carbide ... more(P05 Carbide)Finish: AlTiN CoatedCutting Hardness: HRC45Number of Flutes: 2 FlutesEnd Cut Type: Square EndSpiral Angle: 35 DegreePackage Content: 2pcs x Square Nose End MillDescriptions:P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.Features square end cut, 2-flute design.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 65mm MT2 Tail-Stock Rotary Axis Live Center Fit CNC A 4th Axis Router Tailstock.
Buy It Now
Free Shipping Condition: New Location: China Specifications:Cutting Edge Diameter: 3.175mm / 0.125"Shank Diameter: 3.175mm / 1/8"Cutting Edge Length: 12mm / 0.47"Overall Length: 37mm / 1.46"Milling ... moreDirection: Right HandMaterial: G05 Tungsten CarbideFinish: Titanium CoatedStyle: Corn ShapePackage Content: 2pcs x End Mill Router BitsDescriptions:G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application This setup blocks height gauge set is mainly used to measure height, depth, etc. It can be widely used in fence, router bits, saw blades, ... morerouter bits, drill bits, table saw, bandsaw, and woodworking, like bench drill, cutter height and table saw, router bit, cutter, drill press, etc. It is an ideal choice for carpenters, household decoration, and mechanical maintenance. Specification Style: Modern Shape: Rectangular Color: Red+Black Number of Items: 15 Overall Material: Aluminum Alloy Material of Storage Box: Plastic+EVA Surface Treatment: CNC, Sand Blasting, Oxidation, and Laser Engraving Size of Setup Blocks: 1/16 ", 3/32", 1/8 ", 5/32", 3/16 ", 7/32", 1/4 ", 5/16", 3/8 ", 7/16", 15/32 ", 1/2", 23/32 ", 3/4", 1x2x3 ". Accuracy: ±0.001".
Buy It Now
$6.00 Shipping Condition: New Location: China Spiral cnc wood cutters tools are wonderful in. Sharp Cutting Edge, Excellent CNC Work! (3) Available Sizes (unit: mm): 0.125" / 0.157" / 0.236" / 0.315" ... more(3.175mm / 4mm /5mm/ 6mm / 8mm);. Shank dia:3.175mm.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Description: Features: 6mm cutting diameter, 4 flutes, coarse teeth, 6mm straight shank, deep helical groove. Used widely in the milling machines or machine ... moretools for milling the steps, recesses, vertical plane surfaces, etc.
Buy It Now
Free Shipping Condition: New Location: China 5 x 2 Flute Ball Nose End Mill (2.0 x 17mm). 5 x 2 Flute Straight End Mill (3.175 x 17mm). 5 x Single Flute End Mill (3.175 x 25mm). Can be used with ... more1610, 3018, 3018pro and other engraving machines.
Buy It Now
$3.89 Shipping Condition: Brand New Location: China High efficiency ---- these bits own sharp edge which is for fast engraving that makes high efficiency; durable, high precision and not easy to break; ... moreit is smokeless and burr-free while processing. Range of processing ---- for cutting/engraving/carving/drilling/sculpturing/milling in materials like MDF, acrylic, density board, solid wood, wood, plastics, PVC, PVC expansion sheet, PP, ABS etc.
Buy It Now
Free Shipping Condition: New Location: China Specifications:Shank Diameter: 6mm / 0.24"Tip Size: 3mm / 0.118"Flute Length: 25mm / 0.98"Total Length: 45mm / 1.77"Cutting Angle: 30 DegreeMaterial: ... moreSolid Carbide (Tungsten Steel)Package Content: 1pcs x Wood Engraving BitDescriptions:Sharp edge provides smooth cutting, no glitches. 6mm shank fits most small rotary tools and grinders when finishing, grinding, and shaping the work with precision.Can be used for carving, cutting, engraving, milling, slotting, 2D or 3D sculpturing, surface machining, etc. The deep angle and sharp point allows for precise details.Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect. Fast engrave and cut to improve efficiency.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China Specifications:Cutting Diameter: 6mm / 0.24"Cutting Flute Length: 52mm / 2.05"Shank Diameter: 6mm / 0.24"Overall Length: 80mm / 3.15"Material: High Speed ... moreSteelNumber of Flutes: 2 FlutesEnd Cut Type: Ball NosePackage Content: 2pcs x Ball Nose End MillDescriptions:High speed steel end mill has high hardness, good toughness, wear resistance, and good processing performance, ensuring work efficiency. Only the base substrate without any coatings, good for general purpose milling.Features ball nose end cut, 2-flute design. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting.Widely used in side milling, end milling, slotting, hole machining, finishing. Suitable for stainless steel, alloy steel, aluminum, carbon steel, tool steel, copper, plastic, etc..
Buy It Now
Free Shipping Condition: New Location: Chino, United States The flat knobs on both sides allow you to easily detach and replace the bristle. It's your ideal choice! Nylon Bristle: The bristle is made of high-quality ... morenylon with high elasticity and good bending, which is lint-free, wear-resistant, and heat-resistant.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Multiple Sizes: The setup blocks height gauge set has 15 setup blocks with different sizes and high flatness:1/16 ", 3/32", 1/8 ", 5/32", 3/16 ", 7/32", ... more1/4 ", 5/16", 3/8 ", 7/16", 15/32 ", 1/2", 23/32 ", 3/4", 1x2x3 ".
|