In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
275.00
Buy It Now
Free Shipping
Condition: New
Location: Somerset, United States
Wisconsin Knife works - wkw - for use on wienig moulder or shapers. 25 x 2 x 5/16 M3 Corrugated 60 degree #45639.
$
165.00
Buy It Now
$5.50 Shipping
Condition: Seller refurbished
Location: Conehatta, United States
Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
$
115.00
Buy It Now
$5.50 Shipping
Condition: Seller refurbished
Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
$
85.00
Buy It Now
$20.95 Shipping
Condition: Used
Location: Raymond, United States
High speed moulder / shaper steel. 1” wide. 5/16” thick. 20 1/2” long. Used mostly for shaper profiles. Over $250 for a full 25” stick new.
$
28.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
51.00
3d 7h 33m 46s
2 bids
$10.65 Shipping
Condition: Used
Location: White City, United States
Byrd Shelix cutter head for shaper or moulder.
$
239.00
5d 7h 3m 21s
0 bids
$24.75 Shipping
Condition: Used
Location: Cedar Rapids, United States
Lot of 38 sets of molding knives. 5/16" thick, corrugated backs. High quality, high speed tool steel. Most recently sharpened, some plastic dipped, some ... morewith sharpening templates. Two-knife sets. From now-closed major furniture manufacturer. Pick up NE Cedar Rapids or will ship.
$
59.85
Buy It Now
Free Shipping
Condition: Used
Location: Beach Lake, United States
1/4" to 3/8" steel. 1 1/2" to 3 1/4" high.
$
59.85
Buy It Now
Free Shipping
Condition: Used
Location: Beach Lake, United States
5/16" and 3/8" steel. 1 1/2" to 4" high.
$
40.00
Buy It Now
$6.23 Shipping
Condition: Used
Location: Seattle, United States
Corrugated-back Brickmould Casing 5/16" HSS knives. Leitz HSS-D steel.
$
9.99
4d 8h 30m 37s
0 bids
$6.16 Shipping
Condition: Used
Location: Centerville, United States
This 3-knife shaper cutter head has a ⅝ inch bore, a 3⅞ inch diameter, and is ⅞ inch thick. It has a maximum RPM of 4000. This cutter head is perfect ... morefor woodworking supplies and can be used with a variety of shaper machines. The shaper head is made in the United States and is of high quality. It is in good working condition and will help you achieve excellent results in your woodworking projects. No cracks, gouges, or chips. Not sure of the make.
$
30.00
3d 0h 40m 51s
0 bids
$9.56 Shipping
Condition: Used
Location: Hewlett, United States
Comes with 8 knives. 3205, 2355, 3208, 23218, 3206, 3212LM, 3209, 3203LM. Large washer and allen key
$
30.00
3d 0h 40m 50s
0 bids
$9.56 Shipping
Condition: Used
Location: Hewlett, United States
FOUR VINTAGE DELTA ROCKWELL 1/2" BORE SHAPER CUTTERS. INCLUDES D-103. D-107, D-138 and D-197.
$
325.00
Buy It Now
$24.75 Shipping
Condition: Used
Location: Raymond, United States
This is part of my lock edge shaper knife collection! Tons of different profiles. Crown, base, table edge, cove, raised panel, flute, ogre, and just about ... moreeverything else. Please study the pics. I will have another 2 lots of knives listed that are also part of the collection. I am open to serious offers. The lock edge is for a 1 1/4” arbor shaper. It does have the bearing on the bottom. These typically run over $200 alone new. If you like playing around with moulding then this set is for you.
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Rego Park, United States
This T-Slot Milling Cutter is designed for woodworking projects such as door making, stile, rail, and cabinet construction. With a 6T-120mm cut height ... moreand 10mm height, it is made of durable carbide material and manufactured in China. The cutter has a 35mm bore and is ideal for use in CNC, metalworking, and manufacturing industries. The unit quantity is one and it falls under the category of Business & Industrial, CNC, metalworking & manufacturing, and other woodworking supplies. It is an excellent tool for cutting precise slots and grooves in woodworking projects.
$
139.00
Buy It Now
$5.50 Shipping
Condition: Seller refurbished
Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
$
29.69
Buy It Now
$2.99 Shipping
Condition: New
Location: China
Tongue & Groove Shaper Cutter 6 Teeth Disc Milling Cutter Slotting Cutter Tool Woodworking CNC. Significantly improve production efficiency. Ø 125 x 35 ... morex 11 mm 11 mm. Ø 125 x 35 x 10 mm 10 mm. Ø 125 x 35 x 9 mm 9 mm.
$
55.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
239.00
5d 6h 55m 51s
0 bids
$24.75 Shipping
Condition: Used
Location: Cedar Rapids, United States
Lot of 29 sets of molding knives. 5/16" thick, corrugated backs. High quality, high speed tool steel. Most recently sharpened, some plastic dipped, some ... morewith sharpening templates. Nice assortment with some crowns and bases. Two-knife sets. From now-closed major furniture manufacturer. Pick up NE Cedar Rapids or will ship.
$
25.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
88.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
54.85
Buy It Now
Free Shipping
Condition: Used
Location: Beach Lake, United States
$
12.00
Buy It Now
$5.25 Shipping
Condition: Used
Location: Union Grove, United States
3-Piece Molding Shaper Cutter Set. Delta Milwaukee. No. 254 Style E.
$
28.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
75.85
Buy It Now
Free Shipping
Condition: Used
Location: Beach Lake, United States
1 3/4" to 3 1/4" high.
$
28.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
54.85
Buy It Now
Free Shipping
Condition: Used
Location: Beach Lake, United States
$
34.00
Buy It Now
$5.45 Shipping
Condition: Used
Location: Seattle, United States
$
160.00
Buy It Now
$24.75 Shipping
Condition: New
Location: Raymond, United States
Unground full stick of corrugated moulder knife steel. 25” in length. 2 3/4” wide. 5/16 thick. New price is well over $250 for a full stick. Still in ... morethe paper wrapper! Ask if you have any questions!!
$
89.99
Buy It Now
$5.50 Shipping
Condition: Seller refurbished
Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
$
80.00
Buy It Now
Free Shipping
Condition: Used
Location: Raymond, United States
4” lockedge steel shaper/moulder blanks. Make your own knives. Both pieces have a profile lightly scratched on the back and 1 piece has a small cut into ... morethat should not be a problem for 95% of the profiles you would grind onto these.Both pieces are 5” long. 4” lockedge steel is over $400 a stick. These account for almost half of a 25” stick.
$
175.00
Buy It Now
$5.50 Shipping
Condition: Seller refurbished
Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
$
225.00
Buy It Now
$10.34 Shipping
Condition: Used
Location: Waukesha, United States
Cutterhead weighs 6 lb. Two t-wrenches included. To achieve the desired angle, simply locate positions 1 and 2 located on the top of the cutter head. ... moreWith the use of a T-Wrench, insert into position 1 to unlock, then position 2 to tilt each apparatus (up or down) to the desired location.
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Anderson, United States
Delta Rocwell Milwaukee (8) 3-Piece Molding Shaper Cutter Knives Set & More Non-complete Sets.
$
300.00
Buy It Now
$40.00 Shipping
Condition: Used
Location: Layton, United States
20 knife sets with 20 Templates for moulder/shaper from a pallet bought at auction.You will receive the items shown in the photos.Knives, woodworking, ... moreindustrial woodwork, molder, shop equipment
$
24.00
Buy It Now
$6.23 Shipping
Condition: Used
Location: Seattle, United States
5 degree bevel on the top of the knife, 30 degrees on the tip.
$
40.00
Buy It Now
$5.45 Shipping
Condition: Used
Location: Seattle, United States
$
48.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
89.99
Buy It Now
$5.50 Shipping
Condition: Seller refurbished
Location: Conehatta, United States
Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
$
235.00
Buy It Now
$17.50 Shipping
Condition: Used
Location: Raymond, United States
This lot of 15 sets of base molding knives includes high-quality blades from Weinig, Lietz, Schmidt, and WKW. These knives are designed for use with a ... moreshaper moulder and are perfect for woodworking professionals looking to create precise and intricate designs.
$
48.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
300.00
Buy It Now
$40.00 Shipping
Condition: Used
Location: Layton, United States
20 knife sets with 20 Templates for moulder/shaper from a pallet bought at auction.You will receive the items shown in the photos.Knives, woodworking, ... moreindustrial woodwork, molder, shop equipment
$
48.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
38.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
34.99
Buy It Now
$5.90 Shipping
Condition: Used
Location: Gainesville, United States
NO PO BOXES, APOS for this sale.
$
59.85
Buy It Now
Free Shipping
Condition: Used
Location: Beach Lake, United States
1/4" to 3/8" steel. 1 1/2" to 2 1/2" high.
$
250.00
Buy It Now
Free Shipping
Condition: New
Location: Longwood, United States
Amana Tool SCS-1002 Multi-Piece Profile Pro. The Profile Pro™ Universal Shaper Cutter System from Amana Tool. Designed for professionals, the Profile ... morePro™ features over 135 different interchangeable steel knife patterns, ranging from molding to joinery to door sets, which can all be used with a single cutterhead.
$
300.00
Buy It Now
$40.00 Shipping
Condition: Used
Location: Layton, United States
20 knife sets with 20 Templates for moulder/shaper from a pallet bought at auction.You will receive the items shown in the photos.Knives, woodworking, ... moreindustrial woodwork, molder, shop equipment woodworking tools
$
38.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
80.00
Buy It Now
Free Shipping
Condition: Used
Location: Coralville, United States
Moulder knives for decorative handrail or casing moulding.5/16" thick. Grinding template included if pictured. All my knives can combine shipping ... moreif the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
$
48.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
575.00
Buy It Now
$24.75 Shipping
Condition: Used
Location: Raymond, United States
My only 3/4” corrugated moulder head for shaper use. Comes with 30 profiles including crown, base, round over, flute, table edge, ogee, and others. Most ... moreof these cutters are smaller and have shallower profiles to be used with this 2 knife moulder head on a 3/4” spindle shaper. If you have any questions please ask. I do have approximately 24 more profiles we used with this head that will be listed later in a separate lot.
$
55.00
Buy It Now
$7.60 Shipping
Condition: Seller refurbished
Location: Parlin, United States
Weinig Corrugated Knives Woodmaster Profile Moulding Shaper Moulder Knife 68 Corrugated High Speed Steel Profile Knife Click on any photo. To zoom. Lots ... moreof photos so you can see what you are getting. If you'd like more photos of this knife. Let me know, as I know some of the pic were a little dark, b ut I boosted the contrast afterwards so I think they are fine. Let me know. If not. I know some of you that are running Woodmasters. Or other shapers, need only 1 knive.while others need 2, so I'm listing these two knives such that you can pick one or two in the quantity field. The price is see, is per knife, and you select how many knives you want for that price.and shipping within the USA is free. This knife is made from high quality M 2 high speed steel Hardened to 6 2 RC. 5/16" thick. This is the exact blade you will be getting. Can be used in a variety of shapers and moulders. Including the Woodmaster, using the 700-S2 accessory cutter head. Corregated steel is so much safer than smooth s teel. This kni fe was created on a very high quality Weinig profile cutter. And it milled less than 175 linear feet. Ju st like new. Perfectly balanced with the 2nd knife. An d ready to use. USA Shipping is Free for Parcel Post. Or only $3.88 for Priority Mail. If you win mulitple sets of knives from me, shipping will NOT increase. I will ship worldwide. For extra
$
279.00
5d 6h 48m 40s
0 bids
$24.75 Shipping
Condition: Used
Location: Cedar Rapids, United States
Lot of 25 sets of molding knives. 5/16" thick, corrugated backs, high quality, high speed tool steel. Most recently sharpened, some plastic dipped, some ... morewith sharpening templates. These are two knife sets. Excellent assortment, with multiple crowns and bases. Larger sizes. From now-closed major furniture manufacturer. Pick up NE Cedar Rapids or will ship.
$
199.00
Buy It Now
$11.60 Shipping
Condition: Used
Location: Raymond, United States
This is a like new Wisconsin Knife Works raised panel shaper cutter. Has replacement carbide inserts that can be changed to different raised panel profiles. ... moreHas all the factory books and some extra tips included!! Very neat raised panel cutter!!
$
129.00
Buy It Now
$8.98 Shipping
Condition: New
Location: Tracy, United States
Cutter BodyAluminum. RPM8,500-12,000. t15mm (19/32). (B) Cutting Height40mm (1-1/2). (d) Bore1-1/4.
$
40.00
Buy It Now
$5.45 Shipping
Condition: Used
Location: Seattle, United States
Pair of corrugated-back beaded HSS moulding shaper knives. 1/4" x 1 1/4" x 3 3/8".
$
300.00
Buy It Now
$40.00 Shipping
Condition: Used
Location: Layton, United States
20 knife sets with 20 Templates for moulder/shaper from a pallet bought at auction.You will receive the items shown in the photos.Knives, woodworking, ... moreindustrial woodwork, molder, shop equipment
$
299.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Boswell, United States
Wisconsin Knife Works Wood Shaper Knives-Set Of 26 (New Old Stock)13 different types/sizes of knives (2 per type/size)All knives are 1/4” thick with varying ... morelengths EB1364FH3
$
80.00
Buy It Now
$24.75 Shipping
Condition: Used
Location: Raymond, United States
This is part of my lock edge shaper knife collection! All beaded profiles. 10 different beaded knife profiles! Please ask for any questions.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Lot 259 W&H Williams Hussey Or Standard Corrugated Knives Shaper Moulder
Moulder knives for either standard moulder/ shaper corrugated heads or for use in williams and hussey planer moulder. Templates included IF in picture. Otherwise grinding template not included, but easily made. 1/4" thick. All my knives can combine shipping if the price exceeds $20. Otherwise shipping will be as stated! Posted with
Lot 267 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative base moulding. 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 268 Bull Nose Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for 1 3/4 bull nose edge moulding. 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Set of 4 Corrugated Crown Moulding Knives Cutter Shaper Moulder
Set of 4 Corrugated Crown Moulding Knives I don't know much about these. Selling them for my boyfriend who had them custom made for a customer who wanted to match their existing moulding. They cost $400 then. If you need me to measure anything just let me know, I will be happy to. See all the picts, there's some samples of wood that the cutters cut so you can see the profile. Thanks for looking!
Wood shaper molder blades, knives, sets of two, (15) F
These blades were ground on 3/16" stock and have widths 3/4" to 2 3/8. Priority shipping/ California buyer pays 9% tax
Wood shaper molder blades, knives, sets of two, (5) R
These cutters are 3/8" thick and have widths from 1 3/8" to 3" Priority Mail. California buyer pays 9% tax.
Wood shaper molder blades, knives, a set of two, crown molding
These blades are cut on 5/16" stock and have a width of 4" Priority Mail. California buyer pays 9% tax.
Delta/Rockwell Moulding Shaper Cutter Knives # 252 Style "C"
Delta/ Rockwell Moulding Shaper Cutter Knives! Catalog# 252 Style"C" Set of three knives.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
2 Boxes of Shaper Molder Knives Blades 701370 & 701369. Unknown Application
CALL 309-261-5695 FOR QUESTIONS. 2 Boxes of Shaper Molder Knives Blades 701370& 701369. Unknown Application Came out of closed commercial cabinet shop. Not sure what fits. View all photos. Check out my! Payment due within 7 days of auctions end.
Lot 392 1/4 Round Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for 1" qtr round moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 393 Frame Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for secorative face frame or cabinet door face moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 394 Bed Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative crown or bed moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e044872e3-0xfc-
Lot 396 Lip Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative panel or lip moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 397 Base Cap Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative base cap moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e04487328-0xfb-
Lot 398 Crown Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative crown moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 399 Full Round Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative 2 3/8 full round moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 400 Panel 2 Up Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative 2 at a time panel moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 373 Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 374 Edge Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for eased edge 13/16" moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 377 Cap Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cap profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 378 Applied Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for applied profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 379 Cornice Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cornice profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 380 Door Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cope and stock or mitered door sticking moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 382 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for casing 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 383 Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for edge or back 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 386 Cap Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cap or rail moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 388 Crown Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for crown moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e04597721-0xfc-
Lot 389 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for base moulding minimal signs of use 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 391 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 357 Handrail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative handrail or casing moulding.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 359 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for rabbet cutting for general use or making t-astragals.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 360 Astragal Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for general use or making t-astragals.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 361 Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for gang stop production 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 362 Crown Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for crown moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 363 Dado Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for dado moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 364 Cove Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for cove moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e046fddb1-0xf4-
Lot 367 Door Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for door profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e046fdd49-0xf3-
Lot 368 Panel Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 369 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 370 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative profile casing 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 371 Astragal Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative profile astragal 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 372 Bullnose Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for bull nose moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Wood shaper molder blades, knives, 17 sets of 3 each
These blades are cut on 1/4" and 3/8" stock(top row for the latter) and have a width of 3/4" to 3" Priority Mail. California buyer pays 9% tax.
Wood shaper molder blades, knives, 15 sets of 2 each (Br)
These blades are cut on 3/16" and have widths of 3/4" to 2" Priority Mail. California buyer pays 9% tax.
Lot 453 Small Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives set of small various profiles. Save on shipping! 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 452 T&G Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for tounge and groove with chamfered edges both sides. Very useful for gates doors and others. 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 451 Door Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for million stock and glass stop for doors same profile 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Wood shaper molder blades, knives, 10 sets of 2 each (N)
These blades are ground on 3/16" stock. Blades have widths from 3/4" to 1 1/4" with stock pieces 2" Priority Shipping. California buyer pays 9% tax
Moulding Blades Knives Shaper Moulder 2 Blades. Trim
2 blades for moulding or trim cutting. Not sure make. Good condition. Will be listing several lots. Thanks for looking and be sure to check out my other listings. Thanks. Posted with
Moulding Blades Knives Shaper Moulder 3 Blades.
3 blades for moulding or trim cutting. Not sure make. Good condition. Will be listing several lots. Thanks for looking and be sure to check out my other listings. Thanks. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e411f60fd-0x105-
Lot 507 Applied Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for traditional door applied moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 506 Door Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for traditional door moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e4ea210c4-0xf9-
Lot 624 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 621 Chair Rail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for chair rail moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 619 Back Band Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for back band moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 618 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for elegant casing moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 636 Heavy Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for detailed traditional casing moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 634 Modern Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for contemporary casing moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Lot 632 Small Profile Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various profile cuts moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e654abd51-0x10a-
Lot 631 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Wood shaper molder blades, knives, 14 sets of 2 each (B)
Cut from 1/4" stock. These blades have widths from 3/4-1 3/4" Priority Mail. California buyer pays 9% tax.
2 Simonds Saw and Steel Moulding Shaper Blades Knives Found in Secret Room...B08
Secret room found A secret room was found on the 3rd. floor during renovation. What appeared to be a vent was actually a room.a secret room! This is an actual item from that room. 2 Simonds Saw and Steel Moulding Shaper Moulder Knives About 1 7/8" x 2 1/2" x 3/16" Blades Have Some Tape and Rust. See Photos Visit my ebay store for more items from Staton Mansion Thanks for looking!
Wood shaper molder blades, knives, 11 sets of 2 each (N)
These blades are cut on 1/4" stock and have widths from 1 1/4" to 2. Priority shipping. California buyer pays 9% tax.
Lot 694 Chair Rail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for chair rail moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 692 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I ... morewill be posting 30-50 per week so keep looking for the next 6 months! Posted with
Lot 690 Back Band Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for back band moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with