|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Willoughby, United States On eBay for over 16 years! We are a trusted seller with 100% feedback approval& high star ratings in all categories. We are honest in our listings. ... moreWe ask that you read the ad carefully. If you are not sure about an item please ask questions before bidding. To ask a question please scroll down to the bottom of the page on the left side and click on the"ask a question" link. We rarely answer questions on weekends and during holidays. We will reply first thing next business day. Thank you for looking at our items. Dan Batson, DGD Inc Shipping cost is by freight truck. Please email for a quote before bidding! Include zipcode& if you have a forklift or loading dock Delta DJ-20 8 inch. 1 1/2 HP Jointer. This jointer is in nice physical condition. Jointer powers on. I ran a board over it several times and had to readjust the table then it did a straight level cut. Runs smooth and plenty of power. It has a 115/230 volt single phase 1 1/2 horsepower motor. 115/230 means you can set it to run on regular house plug or 230, you can see how to set it to either voltage in the picture showing the specs plate for the motor. It is setup for 230 volt right now with a plug that looks like this( This unit includes the jointer, catalog#37-350(little older model that is made in the Delta Base, catalog#52-672, and magnetic motor starter, catalog#52-704. It is missing a knob for the table adjustment lever on the front(right) of the machine. I am selling this unit as I have described it. Shipping cost is by freight truck, please email for a quote. Include zipcode& if you have a forklift or loading dock or not. Click for more information about this nice item.Click to see an online manual for this nice jointer. This unit is big and will need to be truck shipped on a pallet. You can pickup this equipment in Springfield. MO at no charge. Email me for accurate shipping quote. When you email please include your zipcode. Commercial or residential address(home businesses do not qualify as commercial address) and if you hav
Buy It Now
$23.05 Shipping Condition: New – Open box Location: Berkley, United States For sale is a VERY LIGHTLY used Byrd cutterhead with new bearings. This was ordered for a Delta 37-190 6" jointer. It was used for maybe 4 or 5 cuts in ... moretotal. There was another problem with the machine and a replacement part was not available so a new jointer was purchased. It was carefully installed and carefully removed from the machine. The extra 5 replacement blades are included with the cutterhead. Please see the info from Byrdtool below: This SHELIX head features 5 wings of knives with a total of 30 knives for installation in the DELTA 6″ Jointer, 37-190.
Buy It Now
$24.63 Shipping Condition: Used Location: Salem, United States Delta Rockwell 10" bandsaw or 4" jointer stand. This is in very good condition. The stand has some light rust. Extra holes drilled in the bottom ... moreplate( for mounting the motor) All the bolts are included. Shipping is to the continental U.S. only. Payment is to be made within 5 days of auction close by Paypal only. Thanks for looking!
Buy It Now
$349.00 Shipping Condition: Used Location: Central Falls, United States Delta Jointer. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted ... moreand acknowledged by us in writing. We reserve the right to correct typographical errors.
Buy It Now
$5.00 Shipping Condition: New Location: Freeland, United States Delta’s part number for this item is DJ-26, NJ-211, or FJ-325, depending on the jointer model. The gage blanks were laser cut from. 030” thick 304 stainless ... moresteel before being carefully deburred and brush finished, prior to application of a high quality bright red vinyl decal.
Buy It Now
Free Shipping Condition: New Location: Oregon City, United States They fit Delta 37-290, Walker-Turner, Craftsman 149.21871 and a couple of other 4" jointers. They and are made of high quality high speed steel material, ... moreprecision ground and heat treated to industry standard tolerances to insure maximum edge life and overall performance.
Buy It Now
Condition: Used Location: Youngstown, United States CPO Model 37-360. List Price: $4.659.99, CPO Price: $3.979.99, You save: $680(15% Availability: In Stock, Center-mounted fence safely encloses the rear ... moreof the cutterhead when working to the front of the machine, Rack and pinion movement for smooth. Precise adjustment, Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed, Parallelogram support system allows the table to move up or down in the same arc as the cutterhead. Allowing less space between the table and cutterhead for safer, more efficient cutting, provides less tear-out, Hinged door and removable door panel allow for easy access to the motor and V-belts, Dust Chute, 5-in O.D. Horsepower, 3, Length of Outfeed Table, 41-1/2-in, Table- Type, Three Phase, Revolutions per Minute, 1120 RPM, Fence- Max Cutting Depth, 3/4-in, Tilts In and Out, 45 Degrees, Cutterhead- Diameter, 3-7/8-in, Shipping Weight, 836 lbs. Weight, 706 lbs. Voltage, 220-240/460, Width, 40-in, Size, 5-1/2-in x 47-in, Cutting Capacity- Motor- Height, 43-in, Overall Dimensions- Positive Stops, 90 Degrees. 45 Degrees In and Out, Length, 84-in, Series, DJ-30, Hertz, 60, RPM, 5.000, Length of Infeed Table, 41-1/2-in, Rabbeting, 3/4-in, 12-in Three Phase Jointer(DJ-30) 37-360, 3 HP Three Phase Motor, 3) Knives, Cutterhead Assembly, Cutterhead Guard, Wrenches, Rabbeting Ledge, Tilting Fence, Push Blocks, Instruction Manual, 5-Year Limited Warranty, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/converter w
9h 2m 27s 0 bids
$200.00 Now
Condition: Used Location: South Easton, United States This vintage Delta Milwaukee Benchtop Jointer is a must-have for any woodworking enthusiast. With its powerful electric power source, it guarantees smooth ... moreand precise cuts. The machine type makes it suitable for jointing edges and flattening surfaces. The brand, Delta, is known for producing high-quality woodworking equipment, making this jointer a reliable tool. The model year is unknown, but it is evident that it has been well-maintained and is in excellent working condition. Ideal for both personal and industrial use, this jointer is a rare find that is sure to be an asset to any woodworking shop.
Buy It Now
Condition: Used Location: Nevada City, United States Rare rockwell delta uniplane. Good condition. Right out of clean dry storage from a 40+ year collection of a local gentleman in his seventies that decided ... moreto liquidate. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f02adedd9-0x105-
Buy It Now
Free Shipping Condition: New Location: Council Bluffs, United States Rockwell/Delta 418-03-017-0001 Adjusting Screw Bushing for 37-220 6" Jointer NEW Old Stock Only 2 Available
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Fits all Light Duty Crescent 8" Jointers. Fits all Old Style 8" Delta Rockwell Jointers (37-300,37-301,37-315).
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 1x Cutterhead Bearing 1313116. DJ-20 8" Jointer.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Delta Rockwell 4" and 6" Jointer Cutterhead Rebuild Kit with shim kit to replace old style extended race bearings. Fits 6" Delta Rockwell Jointers With ... more15x35x11 and 17x40x12 bearings. Kit includes Kit Replaces the following Part Numbers.
Buy It Now
Free Shipping Condition: New Location: China The blades are ground with both a primary bevel and a secondary bevel close to the edge. Fox BladesCutters. The blades are razor sharp and ready to go.
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Jointer Instruction Manual. Delta 37-190 6" Deluxe.
Buy It Now
Free Shipping Condition: New Location: United States Delta 37-071 6 In. Bench Top Jointer Grey/Black. style: Jointer. A heavy duty cast iron fence provides accurate jointing. With a precision-machined table ... moreand fence you’ll get to experience long lasting accuracy.
Buy It Now
Free Shipping Condition: New Location: Council Bluffs, United States Rockwell/Delta 901-07-261-3246 6" Jointer Fence Lock Stud NEW Old Stock
Buy It Now
$300.93 Shipping Condition: Used Location: Webster, United States Because of this, they are sold AS IS, as found.
Buy It Now
Free Shipping Condition: New Location: Council Bluffs, United States Rockwell Delta 418-04-105-5001 8" Jointer Elevation Nut. NEW Old Stock. Also Fits Walker Turner 6810 8" Jointer Part #JA-126. Only Have 2.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 2x Cutterhead Bearings 1313116. DJ-15 6" Jointer.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Delta Rockwell 8" Jointer Cutterhead Rebuild Kit with shim kit to replace old style extended race bearings. Fits 8" Delta Rockwell Jointers With 17x40x12 ... morebearings. Kit includes Kit Replaces the following Part Numbers.
Buy It Now
Free Shipping Condition: New Location: Council Bluffs, United States Delta 418-03-112-0002 6" Jointer Table Adjusting Screw NEW Old Stock
Buy It Now
$15.51 Shipping Condition: New Location: Houston, United States This cutterhead fits the following jointers on the market The last picture is an example of a jointed lumber surface through a spiral cutterhead. and ... moremany other 6" jointer. Delta 37-190 Type 1. Delta 37-190 Type 2.
Buy It Now
Condition: New Location: Ellicott City, United States This 8IN Delta Professional Jointer Model 37-380 is a top-of-the-line electrical jointer that is perfect for woodworking professionals. It was never used. ... moreIt consists of two boxes - see pic. Local pick-up only, Ellicott City, MD.
Buy It Now
Free Shipping Condition: New Location: Murfreesboro, United States Set of (2) Jointer Knives for the Delta Model 37-070 & JT160 Bench-Top Jointers.
Buy It Now
$19.98 Shipping Condition: New Location: Houston, United States Grizzly G0490, G0490X. Each head features 4 rows of cutters for a total of ~32(already installed on the cutterhead). Each insert (15mm X 15mm X 2.5mm, ... moreR=150mm) also has four cutting sides so just rotate the one side that gets dull and you are ready to join again.
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States USED,GOOD CONDITION, BLADE FOR THE 32-100. THERE ARE SPECIFICATIONS IN THE PICTURES. THE TEETH LOOK GOOD.
Buy It Now
$22.00 Shipping Condition: Used Location: Salt Lake City, United States I just replaced my cutter head on my Delta DJ-20 8" jointer. This head is in good condition, bearings are decent, blades need sharpening. There was no ... moreproblem with it I just wanted a helical cutter.
Buy It Now
$3.97 Shipping Condition: Seller refurbished Location: Addison, United States Rockwell Delta 37-110 4 Jointer Instruction. Operator Maintenance Manual PM-1697. PRINTED MANUAL.
Buy It Now
Condition: Used Location: Sarasota, United States Belt/Disc 6" Sander, Delta Drill Press, High-Rise 14" Bandsaw, Double Compressor, 6" Jointer, and Oscillating Spindle Sander.
Buy It Now
Free Shipping Condition: New Location: China 6-1/8" x 5/8" x 1/8" Jointer Planer knives for Delta, JET, Powermatic Craftsman. 6-1/8" jointer blades for Powermatic 54 A (no Holes) & Jet JJ 6" We also ... moremake Planer knives for Grizzly, Delta, Rockwell, Dewalt, Portercable, Black & Decker and other Planing Machines.
Buy It Now
$13.13 Shipping Condition: Used Location: Canada This sale is for ONE previously owned COPY of: Rockwell Manufacturing Company. NEW ADVANCED DESIGN: DEALTA HOMECRAFT POWER TOOLS. Pittsburgh 1961) 39 ... morepages bound in a soft cover with an old dealer's stamp in the upper left corner of the cover. This catalog provides images, descriptions of features and prices of the dat for drill presses, grinders, dust collectors, jointers, saws, shapers, sanders and lathes. The catalog is in Excellent-Like-New condition and would be a nice gift for any Delta, Delta Rockwell or Rockwell Delta collector. This PUBLICATION is being offered at any exceptional price. A rule may appear in the photographs for scale reference only and is not part of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinist tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their go-vernment when items cross the border. These are the sole responsabi. Lity of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents, so please don't ask. We now accept PAYP AL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with:
Buy It Now
$15.51 Shipping Condition: New Location: Houston, United States Note there have been various cutterhead designs for thisjointer over its history. The list is for a cutterhead with a 9/16” shaft OD. The last picture ... moreis an example of a jointed lumber surfacethrough a helical cutterhead.
Buy It Now
Free Shipping Condition: Used Location: Van Nuys, United States This is a very good used jointer plane marked"FULTON" on the raised pad just behind the front knob. It also has another raised pad just behind ... morethe frog. Marked"5270" that may be the part number, not sure. This jointer plane has the corrugated bottom, and at a glance appears to have the same proportions as the Stanley No. 7C from around the same period. Overall the plane is in very good condition with about 90% of it's original black Japanning intact. The front knob and rear tote are hardwood, both solid in very good shape, some minor wear, a dent on the top of the tote handle, no cracks, nice finish. The 2.375" wide cutter is sharp and about 95% intact in length, with very little wear, very clean all around and sharp, ready to use. The is no markings on the cutter at all. The bare metal on the plane has a slightly darkened patina, some very minor pitting and a few tiny edge dings, no rust or cracks. This model has no frog adjustment screw in it's design, much like the older Stanley planes from the same vintage years. Overall a very nice, hard to find plane, by a quality maker. As well made as the similar Stanley No. 7, but this Fulton has a 2-3/8" wide cutter. The Stanley no 5 is in good condition it has a small splinter crack by the screw on the handle both are in really good condition.
Buy It Now
$20.00 Shipping Condition: Used Location: Grafton, United States From a late 40's unit, what you see is what you get
Buy It Now
Free Shipping Condition: Used Location: Ulster Park, United States Jointer knives 6 inch made in usa. Supreme co. Actual length is 6 1/8” long. Great condition. Held these up to a light with straight edge and they look ... moregood. Probably an extra set? I’ve included all dimensions - not sure what machine these are for but I’m going to guess Delta. Please feel free to ask questions. Examine all photos. As-is / no returns.
Buy It Now
$17.57 Shipping Condition: Used Location: Lawrenceville, United States Used cutter-head for an 8 inch Delta 37-380 jointer, Part # 1345493. Includes bearings, set of knives in the cutter-head ( fairly sharp and will need ... moreadjusted ) and an extra set that needs sharpening. The bearing on the long shaft is in great condition, the short end is still good, but not as good as the long shaft end. Cutter- head itself looks to be in great shape. This is off of one of our machines, replaced the head with a helical.
Buy It Now
$18.32 Shipping Condition: New Location: Houston, United States Each head features 4 rows of cutters for a total of ~32 (already installed on the cutterhead). Each insert (15mmX15mmX2.5mm) also has four cutting sides ... moreso just rotate the side that gets dull and you are ready to plane again.
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States 1949 Atlas Drill Presses. Instructions Manual.
Buy It Now
Free Shipping Condition: New Location: China Set of (3) High Speed Tool Steel planer knives forGrizzly Planer Models G0453 & G0453P. The quality of the HSS is top notch and second to none. The blades ... moreare ground with both a primary bevel and a secondary bevel close to the edge.
Buy It Now
$15.00 Shipping Condition: Used Location: Beaver Falls, United States This is an original DELTA DJ-15 6” cutterhead with knives and bearings. A great deal if you are restoring one of these or if you are wanting to build ... moreyour own jointer! We have planer heads, shaper heads, jointer heads and more available.
Buy It Now
$18.32 Shipping Condition: New Location: Houston, United States Each head features 4 rows of cutters for a total of ~32 (already installed on the cutterhead). Each insert (15mmX15mmX2.5mm) also has four cutting sides ... moreso just rotate the side that gets dull and you are ready to plane again.
Buy It Now
$105.66 Shipping Condition: New Location: Houston, United States The second picture is an example of a jointed lumber surfacethrough the helical cutterhead. The last two pictures show a cutterhead installed into a RJ-42 ... morejointer. Each head features 6 rows of cutters for a total of ~100.
Buy It Now
$28.16 Shipping Condition: New Location: Houston, United States Each head features 4 rows of cutters for a total of ~50. Each insert also has four cutting sides so just rotate the one side that gets dull and your are ... moreready to plane again. This cutterhead also fits the following machine models.
Buy It Now
$5.00 Shipping Condition: New Location: Oregon City, United States These blades will fit those Delta and other 8" import machines. They are made of high quality High Speed Steel material, and are heat treated to provide ... moremaximum edge life.
Buy It Now
$25.00 Shipping Condition: New Location: Canada Better quality finish with no tear-out. Easy to set up. Loosen the screws, rotate 90°, tighten the inserts in minutes. The inserts can be precisely positioned ... moreby the taper hole style locking. If one edge is chipped or dull, rotate it 90° for a new sharp edge.
Buy It Now
$21.89 Shipping Condition: New Location: Canada
Buy It Now
$12.45 Shipping Condition: Used Location: Negley, United States This bracket connects to the main stand and allows plastic belt guard to be securely mounted. Belt cover available in separate listing
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a pair of bearings(920-08-020-5336 and-5337) for the arbor assembly on Delta 6" jointers. These bearings have extended inner races and will ... morefit the older 37-207 jointer. The newer 6" jointer uses bearings without extended races and these will not work on this machine. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. All shipments to Brazil must go Priority mail Express. All Brazilian shipping charges are on a quote only basis.
Buy It Now
Condition: Used Location: Lebec, United States LIGHTLY USED. WORKS GREAT. DELTA X DJ-20 8IN.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States These woodworking cutting tools are intended to serve as premium blade knives for your jointer machine. This HSS blades allow you to cut at higher speeds ... morewhen compared to traditional alloys. This not only improves your efficiency and workflow, but your cutting capabilities.
Buy It Now
$6.99 Shipping Condition: Used Location: Clinton Township, United States 3 sharp knives.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a pair of bearings for the arbor assembly on the older style Delta 37-110 and 37-290 4" jointers. If your bearings have the extended races(920-08-020-5336) ... morethese bearings will work on your jointer. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. This bearing set will fit the following models. All start with the 28- prefix: 200. 205. 207, 230, 240, 285, 290, 300, 345, 350, 365, 366, 380, 651, 652, 653, 654, 656, 662, 663, 665. This bearing is also used in the 31-425. 31-431, and 37-207. This bearing is also used in the following machines: 31-550. 31-552, 31-710, 31-730, 31-731, 31-910, 40-406, 40-407, 40-409, 40-416, 40-417, 40-419, 40-441, 43-205, 43-370, 43-371, 43-372, 43-381, 43-382, 43-384, 43-385, 43-386, 43-373, and 43-375. Single bearings are $16.00 each delivered.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States 6" 155mm Jointer Blade Knives for Delta, JET, Powermatic, Craftsman, Rockwel. Fits Jet JJ-6, Powermatic 54A (no holes) and others. Fits Jet JJ-6, Powermatic ... more54A. for Ridgid 6-1/8 " Jointer. JET Jointer Models JJ-6OS, JJ-6CS & JJ-6CSX, replaces 708801.
Buy It Now
Free Shipping Condition: New Location: China For Ridgid 6-1/8 " Jointer. JET Jointer Models JJ-6OS, JJ-6CS & JJ-6CSX, replaces 708801. Fits Delta 37-190, 37-658, 37-205, 37-220, 37-195 & Rockwell ... more37-280 37-275X. Craftsman 6 1/8" Delta 37-658. DELTA® model JT360 6 In.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States 6-1/8 " Jointer Blade Knives for Delta, JET, Powermatic, Craftsman, Rockwel jointers. for Ridgid 6-1/8 " Jointer. JET Jointer Models JJ-6OS, JJ-6CS & ... moreJJ-6CSX, replaces 708801. Fits Delta 37-190, 37-658, 37-205, 37-220, 37-195 & Rockwell 37-280 37-275X.
Buy It Now
Free Shipping Condition: New Location: China 6-1/8" jointer blades for Powermatic 54 A (no Holes) & Jet JJ 6" We also make Planer knives for Grizzly, Delta, Rockwell, Dewalt, Portercable, Black & ... moreDecker and other Planing Machines. for Ridgid 6-1/8 " Jointer.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a pair of bearings for the arbor assembly on the Delta 6" DJ15 jointers. These are Delta no. is 1313116. These will not work on the US made jointers.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Type Planer Blades. Fox Blades Cutters. Material High Speed Steel. Made of High Speed Steel for longer cutting life. A set of two. We would be happy to ... moreresolve the problem to benefit both parties. Order Processing.
Buy It Now
$13.13 Shipping Condition: Used Location: Canada This sale is for ONE previously owned COPY(original not photocopy) of: Rockwell Mfg. Co. DELTA ROCKWELL INDUSTRIAL POWER TOOLS CATALOG AB-61-2. 100M, ... morerevised edition(Pittsburgh 1961) 103 pages bound in dirty, worn and creased soft covers with splitting spine. Please note that the pages are yellowed with many dirty and with creases. This catalog displays images and offers descriptions and some specifications for: band saws, abrasive finishing machines, circular saws, cut-off machines, drill presses, grinders, jointers, lathes, motors, planers, radial saws, saw-jointer combination machines, scroll saws, shapers and accessories. This item is in good-fair overall condition and would make a nice gift to the collector of Delta Rockwell products. This PUBLICATION is being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole
|
|
|
|
VINTAGE DELTA QUALITY TOOLS CATALOGUE 1930 MILWAUKEE WI SAWS LATHES JOINTER OLD
VINTAGE. DELTA QUALITY TOOLS' CATALOGUE.OCTOBER 1. 1930, 6' X 9' 32 PAGES.FILLED WITH SAWS.ACCESSORIES.BLADES.ROUTERS.LATHES.JOINTER.MILWAUKEE, WI.SOME WEAR ON BACK COVER.GOOD SHA PE. COMPLETE, CLEAN, ORIGINAL. I'M THE SOURCE OF UNUSUAL. HARD TO FIND GIFTS. YOU WON'T FIND ANY OF MY OFFERINGS IN ANY STORE OR CATALOG. ALL ORIGINAL ITEMS ONLY. ALSO IF AN ITEM DOES NOT SELL, IT WON'T BE LISTED AGAIN, I HAVE TOO MANY ITEMS TO SELL AND SO LITTLE TIME. I'VE BEEN SELLING PAPER SINCE 1947. 4053'A' McREE, ON THE SIDEWALK, ST. LOUIS.CARDBOARD BOX, COMIC BOOKS, TOY METAL CASH REGISTER.BID NOW. DON'T FORGET, SOME OF MY AUCTIONS END AT WEE HOURS IN THE MORNING. IF YOU WISH TO'CONFIRM OR INSURE' YOUR WINNINGS. LET ME KNOW AND I WILL AD COST TO INVOICE' IF NOT, I WILL NOT BE HELD RESPONSIBLE FOR. RARE'POST ... moreOFFICE LOSS OF PACKAGE. 3 OR 4 TIMES A YEAR] IF I HAVE THE POST OFFICE RECEIPT WITH THEIR ITEM NO. SHOWING PACKAGE WAS SENT TO YOU, IT WILL BE YOUR LOSS. IF THE PACKAGE SHOWS UP AT MY DOOR DUE TO RETURN ADDRESS, IT WILL BE SENT TO YOU, AFTER I NOTIFY YOU OF RETURN. I WILL CONFIRM THE ADDRESS AND RESEND FREE OF CHARGE. I WILL NOTIFY THE WINNER WITH AN EBAY INVOICE. I WILL'COMBINE WINS' TO SAVE SHIPPING COST, I WILL NOTIFY THE'OUTSIDE THE U S' WINNER WITH SHIPPING COST. WAIT FOR MY INVOICE TO BE SENT TO YOU WITH THE RIGHT AMOUNT TO PAY FOR SHIPPING. I WILL SHIP.ANYWHERE IN THE WORLD.
|
|
|
Vintage Delta Ball Crank Handle Table Saw, Lathe, Jointer, Drill Press, Sander
VINTAGE DELTA ROCKWELL HOMECRAFT HANDLE WAS USED BY DELTA ROCKWELL ON MANY WOODWORKING TOOLS. THIS HANDLE CAME OFF OF 6" JOINTER. SHAFT SIZE IS 7/16" AND LENGTH IS APPOX. 3 3/4" Will be parting out Vintage Delta Rockwell 6" Jointer 10" Tilt Table Saw Combination Unit Including all parts. Original motor and stand. If you need any parts please message me. Using the"ask a question" function.
|
|
|
Delta Rockwell 4" Jointer Cutterhead
Used cutter head from a Delta Rockwell 37-290 4" jointer. Good condition. Includes what you see in the pics. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Vintage Delta Model 37-207 6" Jointer & Cast Iron, Art-Deco Stand
This auction is for an older Delta jointer with a very desirable cast iron base. The unit is very clean but is in need of a switch to make it functional. The motor is not original. It is a 3/4 hp. Dual voltage, A.O. Smith. The belt/pulley guard is cast into the backside of the base. Knobs, screws, nuts and bolts appear to be the originals. To the best of my knowledge, and after looking it over carefully, I have found no cracks or chips in the iron. The machine comes from a dry environment so the inner base is clean. The Saturn ball on the fence adjusting handle is metal not the commonly seen plastic. I am listing this as a"local pick-up" however, if the seller wishes to make their own shipping arrangements, I would be willing to accommodate that. Thanks for looking.
|
|
|
Delta 37-190 Jointer w/ Mobile Base, 1ph, 110V,
This is a nice used Delta 37-190 Jointer w/ Mobile Base. 1ph, 110V, in good working condition! This item can be picked up in Upland CA or shipped by freight company. Buyer responsible for shipping and handling cost. Send a message to get a shipping quote. Packing or crating will incur additional charges. Please send me a message for quotes if interested in this unit. Comes as shown on the pictures Thank you Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e04df7af5-0xfd-
|
|
|
ROCKWELL/DELTA 6" DELUXE JOINTER HRLB-6. MADE IN U.S.A.
ROCKWELL/DELTA 6" DELUXE JOINTER HRLB-6 MADE IN U.S.A. ROCKWELL/DELTA 6" DELUXE JOINTER I MODEL:HRLB-6 S/N: NJ 266 BF SPECIFICATIONS CUTTING CAPACITY: WIDTH: 6" DEPTH: 1/2" RABBETING CAPACITY: 1/2" X 6" CUTTERHEAD TABLE: SURFACE–OVERALL: 7" WIDE X 42.5" LONG WORKING HEIGHT(TOTALLY ENCLOSED STAND) 29 5/8" WAYS: DOVE-TAILED FENCE: SIZE: 4" HIGH X 36 3/4" LONG TILTS RIGHT AND LEFT 456 POSITIVE STOPS 90°. 45° RIGHT& LEFT OVERALL DIMENSIONS: 20.5" WIDE. 34" HIGH, 48" LONG MOTOR: 5 HP, 3 PHASE 1725 RPM. 220/440 SHIPPING WEIGHT(WITH ENCLOSED STEEL STAND) 200 LBS. GREAT CONDITION!
|
|
|
Delta Industrial Jointer 8” Professional
Delta Industrial Jointer 8” Professional Description: Volts: 120-240 R.P.M: 5000 x min HZ: 60 AMP: 15/ 7.5 Model: 37- 877 Phase: 1 Type: 2– serial No: 010181 W: 4071 Deep of Cut: 0 to ½ Table type 1 ser no: 010551 w 4073 Demensione Table 72 ¾ long X 8 ¼ Condition: Great Conditions We offer no warranties on the sale of used equipment. However. We do guarantee that the machine will be in good working condition upon delivery to your facility. Unit is ready to ship, $100 charge for Crate(Outside of Shipping& Handling Cost) Crating Fee Waived if picking up and don’t need it crated. SHIPPING POLICY: SHIPPING COST SUBJECT TO CHANGE DEPENDING ON YOUR SHIPPING LOCATION-PLEASE if you would like a shipping quote please email us your address information. REFUND: We will refund any item returned within 14 days of our shipment. Provided ... moreit is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT: PAYMENT: We accept pay pal. Wire transfers, cashier’s checks and personal checks as forms of payment. Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. Negative Feedback: We believe strongly in providing the best in customer service. If there are any problems with your order. Before leaving us a negative feedback, please contact us by phone or by e-mail through eBay. We will work with you to resolve any issue as quickly as possible. Normal 0 false false false EN-US X-NONE X-NONE WE APPRECIATE YOU AS A CUSTOMER. AND WE THANK YOU FOR BUYING WITH US. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING SERVICE. THANK YOU FOR PURCHASE& TAKING THE TIME TO LEAVE FEEDBACK
|
|
|
Delta Rockwell Dust Chute For 6" Jointer Cast Iron Stand
Delta Rockwell dust chute for the 6" jointer cast iron stand.
|
|
|
ROCKWELL/DELTA 6" DELUXE JOINTER 37-220 MADE IN U.S.A.
ROCKWELL/DELTA 6" DELUXE JOINTER 37-220 MADE IN U.S.A. ROCKWELL/DELTA 6" DELUXE JOINTER INVENTORY#2949 MODEL: 37-220 S/N: CY3079 SPECIFICATIONS CUTTING CAPACITY: WIDTH: 6" DEPTH: 1/2" RABBETING CAPACITY: 1/2" X 6" CUTTERHEAD SPEED: 4500 RPM. 13,500 CUTS PER MIN. NUMBER OF KNIVES: 3 RUNS IN SEALED. LUBRICATED-FOR-LIFE BALL BEARINGS. TABLE: SURFACE–OVERALL: 7" WIDE X 42.5" LONG WORKING HEIGHT(TOTALLY ENCLOSED STAND) 29 5/8" WAYS: DOVE-TAILED FENCE: SIZE: 4" HIGH X 36 3/4" LONG TILTS RIGHT AND LEFT 456 POSITIVE STOPS 90°. 45° RIGHT& LEFT OVERALL DIMENSIONS: 20.5" WIDE. 34" HIGH, 48" LONG MOTOR: 5 HP, 3 PHASE 1725 RPM. 220/440 SHIPPING WEIGHT(WITH ENCLOSED STEEL STAND) 200 LBS. GOOD CONDITION! CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone ... more800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more information or a current formal quotation. NORMAN MACHINE TOOL. LTD. CONDITIONS OF SALE: INSPECTION AND TEST EQUIPMENT Inspection& Test Equipment will be sold"AS IS" with a conditional return policy on a case by case basis. Please ask questions! Th
|
|
|
Delta DJ-20 8 inch, 1 1/2 HP Jointer. Runs & Works Great! L@@K!
On eBay for over 16 years! We are a trusted seller with 100% feedback approval& high star ratings in all categories. We are honest in our listings. We ask that you read the ad carefully. If you are not sure about an item please ask questions before bidding. To ask a question please scroll down to the bottom of the page on the left side and click on the"ask a question" link. We rarely answer questions on weekends and during holidays. We will reply first thing next business day. Thank you for looking at our items. Dan Batson, DGD Inc Shipping cost is by freight truck. Please email for a quote before bidding! Include zipcode& if you have a forklift or loading dock Delta DJ-20 8 inch. 1 1/2 HP Jointer. This jointer is in nice physical condition. Jointer powers on. I ran a board over it several times and had to readjust the table ... morethen it did a straight level cut. Runs smooth and plenty of power. It has a 115/230 volt single phase 1 1/2 horsepower motor. 115/230 means you can set it to run on regular house plug or 230, you can see how to set it to either voltage in the picture showing the specs plate for the motor. It is setup for 230 volt right now with a plug that looks like this( This unit includes the jointer, catalog#37-350(little older model that is made in the Delta Base, catalog#52-672, and magnetic motor starter, catalog#52-704. It is missing a knob for the table adjustment lever on the front(right) of the machine. I am selling this unit as I have described it. Shipping cost is by freight truck, please email for a quote. Include zipcode& if you have a forklift or loading dock or not. Click for more information about this nice item.Click to see an online manual for this nice jointer. This unit is big and will need to be truck shipped on a pallet. You can pickup this equipment in Springfield. MO at no charge. Email me for accurate shipping quote. When you email please include your zipcode. Commercial or residential address(home businesses do not qualify as commercial address) and if you hav
|
|
|
DELTA 6" JOINTER Cutter Guard PART NJ 204
DELTA 6" JOINTER Cutter Guard PART NJ 204. It as some rust. Please look at the thrid picture it as th must. Does not come with the spring
|
|
|
Rockwell / Delta 4" Jointer - Outfeed Table / AP29
Outfeed table
|
|
|
Vintage Delta Rockwell 4" Jointer Table Adjustment Screw Brass Woodworking Tool
This is for the pictured Delta Rockwell Table Adjustment Screw with a brass fitting. This was removed from a Delta Rockwell 4" Precision Jointer. This is a used item and shows normal wear and tear from use and rust. See pictures for all other details. If you have any questions feel free to contact me. Sold as is. No returns. We accept PayPal only and ship to the United States Only. Alaska. Hawaii, and Puerto Rico USPS Priority Mail only or get a shipping quote first. Payment is required withing 3 days of purchase or contact me if an extension is needed. After you receive your item leave feedback and we will do the same. Thank you for looking. Check out my! Be sure to add me to your! Powered by The free listing tool. List your items fast and easy and manage your active items. All my listing now include a return policy. See return policy ... morepage for details.
|
|
|
Rockwell - Delta 8" Jointer, Model 37-315, Surety Guard, 3PH, 3 Knife Cutterhead
Rockwell 8" capacity Jointer. Model 37-315. 3HP. 220V, 3PH motor with 3450 RPM head speed. 3" diameter. 3 knife cutterhead. 3/8" maximum cutting depth capacity. 8 1/16" x 1/2" rabbeting ledge. 9" x 54" cast iron table. 32" table height. 34" x 4" cast iron fence tilts 0-45 degrees. Push button switches. Enclosed steel base. Cleaned and checked. Trade-in from a local school. Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse ... morework load and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
Vintage Cast Iron Delta Milwaukee Homecraft 6 Inch Jointer Planer - All Good
As shown 6" jointer joiner- all cast iron. Delta Milwaukee Homecraft. Clean polished bed- 27" long. Works fine though blade is dull. Pictures should tell all- call if questions. Call 207-943-5671 or email regarding purchases or questions. If you want your item in a hurry please let me know. Thanks.
|
|
|
Oliver 24" Jointer Model 24-KA-12 Woodworking Pattern Joiner Delta Grizzly
Up for your consideration is an Oliver 24" jointer Model 24-KA-12. The tag reads Machine No. 27355. Serial No. 12. One of the spokes on the the adjusting wheel on the in feed table is cracked, and the locknut has a broken ear. This does not affect the operation of the crank, but should be repaired. The journal for the worm gear on the same mechanism has a previous repair and it has cracked again(see photos) These are minor repairs. All adjusting parts and tables move freely. The motor is 220 volt 3 phase, 5 horsepower, 3600 rpm. One tag says GE Induction Motor, the other says Woods Shaftless Motor. I wired the machine and it ran nicely. The cover on the switch box is missing. The table is in good condition, but may need a little cleaning. The head unit has three knives and is round. The fence is in good condition, with no cracks or breaks. ... moreThe size of the table is 109" x 26" overall. The in feed table is 64 1/2" out feed table is 39 1/2" The basic footprint is 114" x 40" and it stands 33 1/2" from floor to top of the table. This machine probably weighs close to 3000 pounds. I have tried to describe this machine as best as I can. Please ask any questions you might have. I prefer this to be picked up and I will load on your truck for free. If you want to ship please make your own arrangements, but if you need help in this area, just ask. If it is going to be shipped I charge $100.00 for palletizing. If you have any questions you can reach me at 618-559-6011 and ask for Andrew or leave a message and I will get right back to you. Make sure to look at the other woodworking equipment that I currently have listed.
|
|
|
Delta Milwaukee 6" Jointer Table Adjustment/Elevation Screw,
Used table elevation screw for a Delta 6" jointer. Good condition. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Delta Rockwell Homecraft Toggle Switch for Table Saw, Drill Press, Jointer, Band
USED DELTA ROCKWELL HOMECRAFT TOGGLE SWITCH MADE BY CUTLER HAMMER. CAME OFF A WORKING DELTA ROCKWELL 8" TABLE SAW. WAS USED ON TABLE SAWS. DRILL PRESSES, SCROLL SAWS, JOINTERS, SHAPERS AND MOST VINTAGE DELTA ROCKWELL HOMECRAFT TOOLS. SWITCH WAS MADE IN THE USA AND IS LABLED UND. LAB. INSP. 10 AMPS 250 V.A.C. 15 AMPS 125 V.A.C. 3/4 H.P. 115-230 V.A.C. THE HOLE AT THE END OF THE TOGGLE CAN BE USED TO ATTACH THE PUSH-PULL BAR(NOT INCLUDED) SWITCH WAS TESTED AND WORKS Will be parting out Vintage Homecraft Delta Rockwell 4" Jointer 8" Table Saw Combination. Including Original Motor and Stand. If you need any parts please message me. Using the"ask a question" function.
|
|
|
Delta 37-190 Jointer w/ Mobile Base, 1ph, 110V, To be Cleaned & Checked
To Be Cleaned& Checked, Model 37-190, Mfg. Year: 2000, 1ph. 110V, Stock Number: F-1-042) Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment ... moreor deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
Delta 6" Variable Speed Bench Jointer - No Motor
Delta 6" Variable Speed Bench Jointer- No Motor This device has no motor attached which is why it is listed as for parts- not working. All else looks good with no breakage or major defects that we can see. This unit is sold as-is with no warranty. Returns, or refunds. Warranty& Returns: When we make a mistake. We fix it. We may replace the item, exchange it, provide replacement parts, or issue a refund(after the item is returned) We may request pictures or other information to help us process the return. If you are simply unhappy with your item through no error of ours. You may still return it within 14 days. We will refund $ for the item only, not including outbound or return shipping charges. Items not part of our standard warranty& return policy are: Items listed with the following descriptors: as-is" no returns" ... moreno warranty" or"no refunds" Items damaged in shipment Brand new and sealed items. If opened Shipping Information: We process and ship orders twice per week- within 3 days of payment. Shipping may include service by UPS Ground. FedEx ground, USPS First Class Mail, or USPS Media Mail- we reserve the right to choose the best available carrier regardless of what is in the listing. No P.O. Boxes please. We generally use EBay's calculated shipping. Plus a small packaging fee to cover materials used. We do not attempt to profit from shipping. We ship only to"confirmed" PayPal addresses- PayPal requires an adult signature at the"confirmed" PayPal address if winning bid is $250 or more. We DO NOT ship to any International. Canada, HI, AK or APO/FPO address. We try to ship items within the time estimated. Large items may incur additional delays. We can generally combine multiple shipments. Please request an invoice prior to sending payment to take advantage of combined shipping. Shipping via UPS ground/ FedEx ground is not available to P.O. boxes. Local Pickup is always an option at no charge assuming we incur no extra cost associated with that picku
|
|
|
VINTAGE DELTA 6" JOINTER AND 10" TABLE SAW COMBO MOTOR PULLEYS 5500 AND 5700
THESE ARE THE ORIGINAL MOTOR PULLEYS FOR THE DELTA ROCKWELL 6" JOINTER AND 10" TILT TABLE TABLE SAW COMBINATION UNIT MADE IN THE 1940s AND 1950s. THE JOINTER PULLEY. PART NUMBER 5700 IS 7" IN DIA. THE TABLE SAW PULLEY. PART NUMBER 5500 IS 5" IN DIA. BOTH PULLEYS HAVE 3/4" KEYED SHAFTS AND RUN TRUE.
|
|
|
DELTA DJ20 DJ-20 37-350 INVICTA 8" PRECISION HEAVY DUTY JOINTER MACHINE WOODWORK
DELTA INVICTA DJ20 8" PRECISION JOINTER MACHINE CAT. NO. 37-350 230V 1 PH HZ 60 BELOW IS SOME INFO I FOUND ONLINE ABOUT THIS MODEL# AND IS FOR INFORMATIONAL PURPOSES ONLY. 8" wide x 43" long adjustable infeed table 8" wide x 31" long adjustable outfeed table 5" high x 36" long tilting fence 1.5 hp. 115/230 volt, single phase(wired 230 volts) 3 knife round straight knife cutterhead Swing arm blade guard Push button motor control UNIT WAS REMOVED FROM A WORKING ENVIROMENT AND LOOKS TO BE IN GOOD PHYSICAL CONDITION. BUT BECAUSE PLUG NEEDS TO BE REWIRED IT HAS NOT BEEN TESTED SO AS ALL OF OUR AUCTIONS ITEM IS BEING SOLD AS IS AND ALL SALES ARE FINAL. FORKLIFT IS AVAILABLE FOR LOADOUT. FREIGHT CAN BE ARRANGED BY BUYER OR WE CAN ARRANGE AND ADD TO INVOICE AND LOCAL PICK UP IS AVAILABLE. JUST GOT A TRUCK LOAD OF ... moreDELTA WOODWORKING EQUIPMENT SO BE SURE TO CHECK OUT OUR OTHER ITEMS. Check out my other items! n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e28ee8c87-0xfa-
|
|
|
Delta DJ-20 Jointer with Starter, 220V, 3Ph, As Is
As Is, 220V. 3Ph, with starter, S/N: KC0524737350, Stock Number: F-1-037 Framing or crating will incur additional charges. If needed. Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required ... morewithin 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee, if required. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We do not accept PayPal for this machine at this time. Please send company check or cashier's check. Payments via credit card or ACH wire transfers can also be arranged. For further information. Please contact us at 920-452-4494. Ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e28ee8c59-0xfe-
|
|
|
Vintage 10 inch Delta table saw and 6 inch jointer
My father brought this from Chicago when we bought our farm in 1946 and we have used it all along. We added the casters about 50 years ago. It is well equipped. The saw portion is serial#32-7929. Includes 3 various blades with a 5/8 bore, wrench for blade removal, molding head with 6 sets of cutters(including those in the head) both the saw and molding head plates, blade guard and anti-kickback plates, moving table guide, special metal push plate I had made to insure accurate cuts, an exhaust tube, and the miter gauge. It is a tilting table type and has a plywood filler panel. The joiner is 6 inches wide and has an extra set of 3 sharp blades and a special blade holder I made to sharpen them on a surface grinder and is serial#33-5925. This saw is by Delta from Milwaukee before Rockwell bought them and just about ruined the company. Both the ... moresaw and joiner are cast iron, heavy weight stand, ¾ HP double ended motor that is 110V. Condition is very good, it has been in an inside shop the whole time. Because of its size and weight, it is for pick-up at our farm in Crystal Lake IL, we are approx 40 NW of Chicago. I will give my phone number to the buyer to arrange for pickup.
|
|
|
Delta 37-150 6" wood jointer DJ-15 excellent condition cast iron w/ mobile base
Delta 6" jointer with 3/4hp motor enclosed base and mobile base 37-150 DJ-15 excellent condition
|
|
|
Delta 6” variable speed, bench-top jointer, model 37-070
RE: Delta 6” variable speed. Bench-top jointer, model 37-070 Posted with
|
|
|
Delta Table Saw / Jointer Fence Gauge Adjustable
adjustable gauge for jointer fence on a Delta table saw/ jointer. Older. Very little use. 0-45 deg in both directions. Marked HJ-6
|
|
|
Vintage Delta/Rockwell Tool Switch Inner Box,Unisaw, Shaper, Band Saw, Jointer
Up for auction is a used power switch box that can be used with a variety of vintage Delta/Rockwell stationary power tools. This is the inner box that is 1 part of a 4 part switch/box/cover assembly that mounts inside the tool's cabinet. This box and the other parts of the system are becoming scare and are necessary for authentic restorations. Cabinet mounting screws are included. Thanks for looking. `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e409460c4-0xf2-
|
|
|
Vintage Cast Iron Delta Milwaukee Homecraft 4 Inch Jointer Planer - All Good
As shown 4" jointer joiner- all cast iron. Delta Milwaukee Homecraft. Clean polished bed- 27" long. Works fine though blade is dull. Pictures should tell all- call if questions. This item can be picked up for $150- requires phone call first. Call 207-943-5671 or email regarding purchases or questions. If you want your item in a hurry please let me know. Thanks. NOTE- MANY OF THESE ITEMS WILL BE GOING TO BRIMFIELD ANTIQUE SHOW- MAY 15TH 6AM- 5PM- UNDER THE TREE AT SPACE NO. 201 N.E. MOTEL- ALSO NORTH FIELD MAY 14 1PM- 5PM CORNER SPACE NO. 80.
|
|
|
DAVIS AND WELLS SHAPER FENCE - DELTA POWERMATIC OLIVER YATES JOINTER PLANER
One pair of Davis and Wells shaper fences. The fences are in very good condition with no cracks or chips. There are a few casting imperfections that appear as dark spots on the photos but they are due to the factory casting and finishing process not wear or damage to the fences. Each individual fence measures 9-7/8" L x 2-1/8" W x 3-1/4" H. The distance between each slot is 3-13/16" center to center with each slot being 1-3/4" L and 7/16" W.
|
|
|
Delta Rockwell 4" Jointer Fence Complete
Used fence from a Delta Rockwell 37-290 4" jointer. Good condition. See pics. Includes just what is in the pics. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Rockwell Jointer 66" Delta with Cabinet Base
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Rockwell Jointer 66" Delta with Cabinet Base Item Description: This is a Rockwell/Delta Jointer. 8" x 66" Cabinet base 32"H x 66"L x 26"W Note Buyer will be responsible for all equipment. ... moreTools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This item is located in Vista. CA 92084 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33296) nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Size: 66" nbsp, nbsp, Color: Grey, nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, Pickup Logistics and Handling: No loading dock or forklifts are available at this site. Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please contact us for additional informatio
|
|
|
Vintage Delta Rockwell reversable 1/3 HP. Motor, off of a 4" jointer mo.37-290
This motor came off of a vintage rockwell delta 4" jointer stand. Which stand will be listed at a later time. The motor runs nice, has good color in the copper windings, has reversable rotation, and is set a- CCW- at this time, no cracks or broken parts, will come with the linkage- on and off- rod shown in the first picture and also the pulley, switch on the motor works nice and is original to accept the- on and off rod, cord looks to be in nice condition, no cracks or brakes, it looks to be the original cord and new owner may want to put on a new updated cord. The label reads- thermal protector, model- 62-413 7PA 48C17D75A E CCW, 1/3 H.P. 115 VOLTS 1725 R.P.M. 60 CYC 1PH 6.4 AMP. FRAME 48Y-5 TYPE SCS, TEMP RISE 50 C- CONT. MEH 22J3 RELAY COD- K. Shipping for the lower 48 states will be $27.00 and thanks for looking. When paying by paypal ... morewe only ship to confirmed addresses. So make sure your information is updated. Thank you. IMPORTANT! We like to have people have positive ebay transactions. So if you are not satisfied with your purchase, we would appreciate you emailing us first for a resolution instead of leaving neutral or negative feedback. Thank you.
|
|
|
8" Rockwell Delta Jointer, 66" table, will pallet and load your truck
Item for sale: Rockwell Delta 8" jointer. Table measures 9"x66" and it has a factory standard 2hp 1ph motor and 3 blades head. Jointer runs good and includes all dirt and grime as we found it. You will need to clean and lube it for long lasting service. It has a super level table and makes beautiful cuts We will attach to pallet and wrap for free. You pay Freightquote directly and we will load truck. We will not accept payment for shipping. For shipping quote contact freightquote.com. It is easy to do. Pallet measures. 40"x72"x40" high at 350# and ships from 89129 and we have fork lift on our end. We gladly accept PayPal We will acept cash for pick up but do not send through mail. We do not accept checks of any kind any time. We use USPS and Fedex for all shipments. We pack and send out items as fast as we can, ... moreusually in 1-2 days depending on size and package requirements. Freight items take a few days to arrange and get picked up. We will not accept shipping fees for freight and this must be paid directly to the shipper. We are happy to help you arrange shipping for large items and provide quotes and instructions to arrange the pick up. We have been selling on ebay for 13 years. We do our best to make everyone happy and make our best effort to properly describe items for sale. Please tell us if we make a mistake and we will do our best to correct any errors. A negative feedback should never be the answer, communication is always the best solution. ID.StorageWarriors1.1999 ID.StorageWarriors.2010 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e7841d29c-0x102-
|
|
|
Vintage Delta Milwaukee 6" Jointer Auto-Set Fence
Used fence from a vintage Delta Milwaukee 6" jointer. The serial# on the jointer is 91-4601 Good usable condition. See pics for details. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Delta Milwaukee 6" Jointer Cutter Head, Vintage
Used cutter head from a Delta Milwaukee 6" jointer. T he serial# on the jointer is 91-4601 Good condition. Includes sharp knives. Pulley, and the mounting bolts. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Vintage Delta Milwaukee 6" Jointer Chip Chute
Used chip chute from a vintage Delta Milwaukee 6" jointer. The serial# on the jointer is 91-4601 Fair condition. See pics for details. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Vintage Delta Milwaukee 6" Jointer Belt/Pulley Cover, Cast Iron!
Used cast iron pulley/belt cover from a vintage Delta Milwaukee 6" jointer. The serial# on the jointer is 91-4601 Good condition. See pics for details. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Vintage Delta Milwaukee 6" Jointer Stand, Splayed Legs
Used steel stand from a Delta Milwaukee 6" jointer. Very good condition. 29" high x 16" wide x 8" deep. Will be shipped disassembled. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
**VINTAGE** DELTA ROCKWELL JOINTER PLANER **VINTAGE**
HELLO! UP FOR SALE IS THIS VINTAGE JOINTER PLANER BY DELTA ROCKWELL. DELTA ROCKWELL MOTOR UA60N013-F CCW 3/4 HP; 1-PHASE, 1725 RPM 115V, 6.9A, 4" PRECISION JOINTER, 0- 1/4" DEPTH OF CUT, DESPITE BEING USED. THIS VINTAGE JOINTER PLANER STILL WORKS AND IS IN GREAT CONDITION TO BE USED AGAIN. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANKS FOR LOOKING! Check out my! Be sure to add me to your!
|
|
|
Vintage Delta Rockwell 37-290 - 4" jointer heavy duty flared leg stand, tools
This is a nice heavy duty- DELTA/ ROCKWELL- 4" JOINTER STAND- MODEL 37-290. Can be used for other tools. This is thick gauge metal, stands 29" tall, bottom legs measure- 19" long, 13" wide, top measures 7" wide, 12" long. The shelves and legs have no crackes or dents or broken parts. This will be taken apart for shipping and all the original bolts and nuts will be in a plastic bag when received. shipping for the lower 48 states will be $34.00 and thanks for looking. When paying by paypal we only ship to confirmed addresses. So make sure your information is updated. Thank you. IMPORTANT! We like to have people have positive ebay transactions. So if you are not satisfied with your purchase, we would appreciate you emailing us first for a resolution instead of leaving neutral or negative feedback. Thank you. 260.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e8f4146d9-0x106-
|
|
|
Delta biscut jointer 32-100 bench mount plate jiointer
Used but fully functional 32-100 bench mounted biscut jointer. used for joining wide casing. Many other uses. Ask questions, hard to find, has been out of production for many years. Money maker in the right hands. Works great.
|
|
|
vintage Delta Milwaukee tablesaw jointer combo stand, splayed legs,heavy frame
This is a old combo delta stand. Had a 4" precision jointer and a 8" table saw mounted to it, the dust chute is still on the stand. The stand measures on the top- 20" long, 24" wide and 30" tall, the splayed legs on the bottom measure 19" wide and 23 1/2" long, legs are not bent or cracked. The motor shelf and top shelf are factory spot welded and stand can not be taken apart for shipping. There is some wear on the paint shown in the pictures. This will be shipped with cardboard wrapped around it, stand weighs about 35 pounds and is a heavy gauge metal, very sturdy. Shipping for the lower 48 states will be $60.00 or can be picked up in Oshkosh Wisconsin. When paying by paypal we only ship to confirmed addresses. So make sure your information is updated. Thank you. IMPORTANT! We like to have people have positive ... moreebay transactions. So if you are not satisfied with your purchase, we would appreciate you emailing us first for a resolution instead of leaving neutral or negative feedback. Thank you.
|
|
|
Delta 8" Jointer Model 37-350 DJ-20, 230V, 1 Ph
Delta 8" Jointer Model 37-350 DJ-20 General Info: Stock# 413516 Condition: Used Tested: Yes Brand: Delta Model: DJ-20 Serial: JOO6149 Year: N/A Shipping Weight: 600 lbs Shipping Dimensions: 80" x 40" x 48" Specifications: 1.5HP Motor. 230V, 1Ph-Cutting Capacity- Height x Weight: 5/8" x 8" Table Length: 76-1/2" Length of Rear Table: 32" Length of Front Table: 42" Fence Size: 5" x 36" Tilts in& Out: 45 Dregrees-Cutterhead Speed: 5500 RPM-Number of Knifes: 3-Cuts per minute: 16.500 Additional Info: Comes with Cast Iron fence. Enclosed Steel stand, cord and plug. We are not trained mechanics or specialists of the following machinery listed and therefore can't guarantee full functionality or specs of the machine. It is always recommend to come out and inspect the machinery listed before ... morepurchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 Visit Us on the Web at
|
|
|
Delta Milwaukee 4" Jointer Elevation Ball Cranks, Tags, Pointer, & Gibs
Used elevation assemblies. Tags, pointer, gibs with set screws for a Delta Milwaukee 4" jointer. Good used condition. See pics for more info. Includes what is in the pics. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Delta Rockwell 4" Jointer Motor Pulley
Used motor pulley from a Delta Rockwell 4" jointer. Part No. 5650 6 1/2" dia. with a 1/2" bore. Good condition. See pics for details. Includes just what is in the pics. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Paypal please.
|
|
|
Delta Rockwell 4" Jointer Chip Chute
Used steel chip chute from a Delta Rockwell 4" jointer. Very good condition. See pics for details. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please.
|
|
|
Delta Milwaukee 6" Jointer Table Lock Mechanism
Used table lock assembly for a Delta 6" jointer. Good condition. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Pay Pal Please. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13ebbde91dc-0xf8-
|
|
|
Oliver table,saw Oliver planer,Oliver jointer,Delta 18" wedge bed planer
Submit your best offer to gabinetero69@univision.com or directly to ebay PICK UP ONLY"NO PAYPAL. ONLY ACCEPTING PAYPAL IF YOU PAY THE FEES. NOTE: Some items in the pictures are no longer available, only the items mentioned below. Interested in starting your own cabinet shop! I have all the machinery needed. I would like to sell everything as a complete package for $11,000 or best offer. Everything is located in a container. Oliver 260 table saw dual motors 3PH no fence or miters*Oliver 399 18"wide planer 3PH motor*Oliver 144 8" jointer 3PH motor, side note: the base that sustains the table has a crack, it can be fixed, item also needs a switch. Maggi best 960 radial arm saw older model, this saw is disassembled for easy transportation, works, just needs new bearings and a new table*Unknown brand dual line boring machine dual ... more3PH motors*Delta 18" wedge bed planer*Delta oscillating edge sander w/spindle sanding attachment*Delta 10" professional radial arm saw*Porter Cable pocket hole machine*Ridgid model TS3650 table saw*Ridgid 6" planer*Cherry picker 2 tons capacity*Dust collector 2HP with metal dust collection pipes, plastic hoses, dust gates, etc*Graco 190 electric airless paint sprayer*Kobalt 30 gallon air compressor*Dewalt heavy duty 12"miter saw*Delta older drill press*Delta 9" band saw*Small Delta belt sander*Electrical box with brackers*Massive Jones Superior Machine No. 46 jigsaw, this machine needs a full restoration*Kreg 4X8 framing table*Miscellaneous: Sanders-Levels-Electric cord extensions-Clamps-Lamps-Nail, staple guns-Etc, too many items to list. if you need more pictures please let me know. The current pictures on the post are the best that I could get because the container(Size 8' X 20' is so full that I can barely move inside. We can set up an appointment for you to see items in person. Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ec57954ac-0x108-
|
|
|
Delta Milwaukee Homecraft tablesaw/jointer combo stand.
Very nice combo table from the 8' tablesaw 4" jointer combo. I have all the other pieces not listed also. We can arrainge disassembly/shipping if needed. Just contact me ahead of bidding if you need a quote. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13ed129f91b-0xfb-
|
|
|
Rockwell Delta splay foot stand for 6" jointer or 14" bandsaw
Delta Rockwell splay leg stand. This was used for the 6" jointer or 14" bandsaw. This is in good condition. Just needs cleaned, some light rust and pitting. All bolts are included. The stand is 24" high and the top is 8" x 16" Shipping is to the continental U.S. only. Payment is to be made within 7 days of auction close by Paypal only. Thanks for looking!
|
|
|
Delta Jointer DJ-20 Long Bed, Mobile Base, Extra Knives, Dust Hood
This auction is for the jointer. The heavy duty mobile base, an extra set of knives, and the dust collection fitting mounted on the machine. The manual is also included. This unit is in perfect condition. It has been used in my climate controlled hobby shop with only occassional use. I am selling this ONLY because I now have a DJ-15 Delta jointer. There is no rust or damage on this machine. Free pick up from my location, also, any interested person can test run it before bidding. It is a 220 volt machine with a single phase motor. Buyer pays all freight shipping charges. And the $300.00 is only an estimate! I will crate the machine with the machine taken off the cabinet. No charge for crating!
|
|
|
ROCKWELL/DELTA 6" DELUXE JOINTER SINGLE PHASE 120 volt
ROCKWELL/DELTA 6" DELUXE JOINTER- ROCKWELL/DELTA 6" DELUXE JOINTER EXCELLENT CONDITION! S/N: NJ 266 BF SPECIFICATIONS CUTTING CAPACITY: WIDTH: 6" DEPTH: 1/2" RABBETING CAPACITY: 1/2" X 6" CUTTERHEAD TABLE: SURFACE–OVERALL: 7" WIDE X 42.5" LONG WORKING HEIGHT(TOTALLY ENCLOSED STAND) 29 5/8" WAYS: DOVE-TAILED FENCE: SIZE: 4" HIGH X 36 3/4" LONG TILTS RIGHT AND LEFT 456 POSITIVE STOPS 90°. 45° RIGHT& LEFT OVERALL DIMENSIONS: 20.5" WIDE. 34" HIGH, 48" LONG MOTOR: 5 HP, Single phase. 120 volt SHIPPING WEIGHT(WITH ENCLOSED STEEL STAND) 200 LBS. EXCELLENT CONDITION!
|
|
|
Delta Magna-Set jointer knife setting jig, Cat. #37-157, box & instructions
You are bidding on a Delta Magna-Set Jointer Knife Setting Jig in the box with its set of instructions. It is in excellent shape. I can't tell if it has ever been used. The catalogue No. is 37-157.
|
|
|
1952 Ad Delta Power Tool Rockwell Manufacturing Milwaukee Wisconsin Saw Jointer
Home ~ Affiliations ~ Discounts ~ FAQs ~ Grading and Certification ~ Premium Shipping ~ About Us VINTAGE ART& ADVERTISING CURATED COLLECTIONS 1952 Ad Delta Power Tool Rockwell Manufacturing Milwaukee Wisconsin Saw Jointer Details Year: 1952 Type: Original Print Ad Grade: Very Fine ++ Authentication: Dual Certificates Image: Color Approximate Size(inches) 6 x 9 Approximate Size(cm) 15 x 23 Description and Condition This is an original 1952 color print ad for the Delta Power Tool Division from the Rockwell Manufacturing Company of 805B E. Vienna Avenue of Milwaukee. Wisconsin. CONDITION This 59+ year old Item is rated Very Fine ++. Light aging throughout. No creases. No natural defects. No surface rub. No tears. No water damage. To find other items from this specific collection in our eBay store. Please. Keywords specific to this image: ... morepricing. Homecraft Unit. PSC1A2C52 188629_PSC1_147 Product Pricing& What We Deliver At times we receive inquiries about our pricing. Especially for vintage advertising or historical halftone prints, and are asked why our prices are consistently higher than some other sellers of similar items. For the first five years of our business, we asked our primary consumer base what they wanted. Our primary consumers- historical societies, historians, archivists, curators, university professors, historical decorators, and collectors, etc. have diverse and specific needs and we've built our business to accommodate those needs, like no other seller worldwide. Below is what is unique about how and what we offer as the world's leader in print ephemera: Product Packaging. Every product is placed against custom black acid-free board with crystal-clear. Archival protective closures. We are the only sellers in the industry who provide display-quality black boards with every item(which also make exceptional presentations for gift-giving) Oversized engravings are protected by museum quality tubes. Product Pictures. Online digital images to evaluate the original products are imaged high
|
|
|
DELTA MAGNA -SET JIG FOR RE-SETTING JOINTER KNIVES(MADE IN USA)
This Magna-Set jig is a patented magnetic design and will hold each knife in perfect alignment at precisely the correct height. Works on any size or type of jointer table to accurately hold any kind of steel alloy jointer knife. Claimed to be better than dial indicator devices at much lower cost. Makes for perfect finish cuts with a +/ 001 inch tolerance. It is in very good condition. Was only used a few times. Comes with 2 instruction manuals. Made in the USA.
|
|
|
Oliver table saw Oliver planer Oliver jointer Delta drill press
Manufacturer: Delta/ Rockwell 15" Drill PressDrill Chuck Included! Condition: I do not know the working condition of this machine but motor turns on and sounds ok This machine is being sold'as is' It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. This item is used and sold as-is. This item was not tested for operation. It was removed from an operating environment and placed in storage. I can not verify operational status. May need service and/or parts to make fully operational.NOTE: THIS LISTING IS ONLY FOR THE DELTA ROCKWELL DRLL PRESS. PICK UP ONLY, CASH ONLY OR USPS MONEY ORDER"NO PAYPAL, ONLY ACCEPTING PAYPAL IF YOU PAY THE FEES. Interested in starting your own cabinet shop! I have all the machinery needed, please see my other items. The current pictures ... moreon the post are the best that I could get because the container(Size 8' X 20' is so full that I can barely move inside. We can set up an appointment for you to see items in person. Thank you. This item is used and sold as-is. It was removed from an operating environment and placed in storage. NOTE: SHIPPING is NOT AVAILABLE for this item- LOCAL PICKUP ONLY. Due to the location of this item, this item can not be shipped. The item can be prepared for pickup. Item must be removed AS-IS. Buyer must pickup at location and must be prepared to remove the item at their cost and with their own resources.
|
|
|
Delta Rockwell 8" x 66" Jointer Single Phase
This is a used delta rockwell 8" Jointer 66" Table length. runs and cuts well. This is a local pick up or freight item. It is the buyers responsibilty to arrange for freight shipping. I will drop off at a local terminal and prepare the jointer for shipment to assist in saving fyou some freight cost. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Delta Rockwell Combo Saw JOINTER 4.5" RISER Vintage Art Deco 21U
Delta Rockwell Combo Saw JOINTER 4.5" RISER Vintage Art Deco 21U Click to Enlarge Click to Enlarge Click to Enlarge 613 W 10# f12 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a Vintage Delta Rockwell Combo Saw JOINTER 4.5" Steel RISER. Bolt pattern is about 5.25" and 7.5" It has a art deco feel to it and is in good condition. It came off a Home Craft 4" model. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. We list items for ... morelocal pick-up and items which we will ship. Shipped items go USPS(shipping days are currently Tuesday and Thursday as of 1-12) insurance and tracking are included on all items. And tracking number will be uploaded. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items listed for customer pick-up only cannot be shipped. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. We accept payment via Paypal only. In accordance with ebay regulations. Payment is expected within 3 days. EBAY forwards all sales information. Therefore, California State Sales Taxes are collected and forwarded to the state of California; the rate is 8 75% DO NOT DUPLICAT
|
|
|
Delta Jointer JT - 160 JT160 in good working condition with manual
This Delta JT160 Jointer is in good working condition and offered here at the low starting price of $40 in an unreserved auction. The manual is included in the sale. The bed measures approximately 30 by 6 inches. You will notice a picture of some of the hobby wood that is available if desired. I am selling this item. Along with several others, for a neighbor. These items are a part of his father's estate. These items and others, which are not listed on eBay, can be viewed near the Twin Cities in Minnesota. If you would like further information, please send me a message. Also, because these items are available at the estate sale, this auction may end early if it sells locally. Thanks for looking. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f475ae921-0xff-
|
|
|
Vintage Homecraft Rockwell Delta 4" Jointer Knife Blade Guard Part Number J-13-S
Vintage Homecraft Delta/Rockwell Guard For 4" Jointer. pork shop blade guard" Good Condition includes Spring. w ill be parting out Vintage Homecraft Delta Rockwell 4" Jointer 8" Table Saw Combination. Including Original Motor and Stand. If you need any parts please message me. Using the"ask a question" function. Posted with
|
|
|
Jointer knives from a Delta DJ20
8 1/16“ jointer knives. Dimensions 8 1/16 x 13/16 x 1/8 from Delta DJ20 jointer. Small chip about a 1/64 deep in all three knives. Can be easily sharpened out.
|
|
|
Delta Rockwell Toggle Switch for Table Saw, Drill Press, Jointer, Lathe, Scroll
VINTAGE DELTA ROCKWELL HOMECRAFT TOGGLE SWITCH. MADE IN THE U.S.A. BY CUTLER HAMMER. CAME OFF A WORKING DELTA ROCKWELL MOTOR. WAS USED ON TABLE SAWS. DRILL PRESSES, SCROLL SAWS, JOINTERS, SHAPERS AND MOST VINTAGE DELTA ROCKWELL HOMECRAFT TOOLS. THE HOLE AT THE END OF THE TOGGLE CAN BE USED TO ATTACH THE PUSH-PULL BAR(NOT INCLUDED) SWITCH WAS TESTED AND WORKS Will be parting out Vintage Delta Rockwell 6" Jointer 10" Table Saw Combination. Including Original Motor and Stand. Will also be parting out a 24" Delta Rockwell Scroll Saw If you need any parts please message me. Using the"ask a question" function.
|
|
|
Delta 6” variable speed bench top jointer model 37-070 used nice shape
delta 6" jointer. used but in nice shape. normal wear and tear from light use. ups to lower 48 only.
|
|
|
4 used - Delta Rockwell tablesaw / jointer Motor Pulley, three 5", one 7",
These are 4 used pulleys taken off of some old working delta Rockwell motors. Used for a table saw and jointer. The arbor shaft holes are all near 3/4" three pulleys are 5" outside diameter and the number on them is- NO.5500, there is one 7" pulley, outside diameter measurement, and the number on it is NO.5700, groves on all pulley look like a- V and are all keyed as pictured. Shipping for the lower 48 states will be $9.50 and thanks for looking. When paying by paypal we only ship to confirmed addresses. So make sure your information is updated. Thank you. IMPORTANT! We like to have people have positive ebay transactions. So if you are not satisfied with your purchase, we would appreciate you emailing us first for a resolution instead of leaving neutral or negative feedback. Thank you.
|
|
|
DELTA 52-858 JOINTER 6''
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 05131300007 Manufacturer: DELTA Description: DELTA 52-858 JOINTER 6' Capacity: 6' Model Number: 52-858 Serial Number: 99177378 Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUDE YOUR EMAIL ADDRESS WHEN
|
|
|
Working Vintage 4" Delta Rockwell Jointer Planer Made In Pittsburgh, PA
This is a vintage and working Delta Rockwell jointer made in Pittsuburgh PA. I know that it works. Because I've used it to clean up some board edges. It's a nice solid piece of equipment. The parts alone are valuable. Contact me to discuss pick-up or delivery. Shipping available at buyers expense. Let me know if you have any questions. Thanks!
|
|
|
1940 "Delta-Craft" "Circular Saw & Jointer" Booklet Manual Dado Wheel Lathe
ITEM: This Listing is for a 1940 Delta-Craft Booklet/Manual titled"Getting The Most Out Of Circular Saw& Jointer. DIMENSIONS: About 9 by 6 inches and there are 52 pages including the covers. CONDITION: The Condition is generally as follows: The inside pages are Good to Very Good with the center page being loose from the staples-The covers are Good with general evidence of age& usage. Please let the pictures help you decide condition. Please e-mail with questions. I will combine shipping based on weight. My goal is 100% satisfaction! I will refund 100% of your costs if you are not satisfied! Please check out my and please add me to your! Thanks for visiting!
|
|
|
Delta Rockwell 4" Jointer Gibs, Set Screws, & Tags
Used gibs and set screws and tags for a Delta Rockwell 4" jointer. Good used condition. See pics for more info. Includes what is in the pics. Check my other listings for more Delta Rockwell parts. Paypal please.
|
|
|
Delta Rockwell 6" Jointer Gibs & Set Screws
Used gibs and set screws for a Delta Rockwell 6" jointer. Good used condition. See pics for more info. Includes what is in the pics. Check my other listings for more Delta Rockwell parts. Paypal please.
|
|
|
Delta Rockwell 6" Jointer Elevation Adjusters & Lock
Used elevation assemblies. And lock for a Delta Rockwell 6" jointer. Good used condition. See pics for more info. Includes what is in the pics. Check my other listings for more Delta Rockwell parts. I'm parting out other machines as well. Paypal please.
|
|
|
Delta Shopmaster JT 160 benchtop jointer
Used only once for small amateur project. Like new!
|
|
|
ROCKWELL DELTA SCROLL, BAND SAW, DRILL PRESS, JOINTER MOTOR 1/3HP 1725 RPM
DELTA ROCKWELL 1/3 HP MOTOR WAS REMOVED FROM FUNCTIONING 4" DELUXE JOINTER. CAN ALSO BE USED ON A SCROLL SAW. BAND SAW, SANDER, DRILL PRESS OR OTHER TOOL THAT REQUIRES A 1725 RPM MOTOR. THIS MOTOR IS SINGLE 115 VOLTAGE. IT IS A REVERSIBLE MOTOR WITH A 1/2" SHAFT. IT IS A MODEL 62-413 MOTOR THAT HAS A 48Y-5 FRAME. COMES WITH NICE CORD AND THREE PRONGED PLUG. IT IS EQUIPTED WITH AN ORIGINAL SWITCH WHICH CAN ACCOMODATE A VINTAGE SWITCH ROD(not included) THE MOTOR RUNS NICE AND QUIET WITH FULL POWER.
|
|
|
Delta Rockwell 6" Jointer, Belt / Pulley Cover, Cast Iron
Used cast iron belt/ pulley cover from a Delta Rockwell 6" jointer. Good condition, s ee pics for more info. Includes what is in the pics. Paypal please.
|
|
|
Delta Rockwell Milwaukee 1/2 HP 1725 RPM Motor Lathe Drill Press Shaper Jointer
DELTA ROCKWELL MILWAUKEE 1/2 H.P. MOTOR FROM A MODEL 1460(46-305) 12" WOOD LATHE. 1725 R.P.M. 3/4" DUAL KEYED SHAFTS. DUAL VOLTAGE 115/230 VLOT MOTOR CURRENTLY SET ON 115 VOLTS. 7.0/ 3.5 AMPS FRAME 171 THIS HEAVY DUTY MOTOR COMES WITH 4 STEP PULLEY. SHAFT GUARD/CONDOM AND ORIGINAL SWITCH AND WEIGHS APPOX. 45 POUNDS. THIS MOTOR WAS MADE IN THE USA BY MARATHON ELECTRIC FOR DELTA MANUFACTURING. THIS MOTOR SHIPS TO THE LOWER 48 STATES ONLY. I AM ALWAYS WILLING TO COMBINE SHIPPING WHEN POSSIBLE. Will be parting out Vintage Delta 12" Wood Lathe Model Number 1460 Including all parts. Original motor and legs. All parts are in GREAT Shape. If you need any parts please message me. Using the"ask a question" function.
|
|
|
DELTA JOINTER JT360
Original owner in good working order. Comes with manual, push pads and a second set of sharpened knives. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13ffe467fe3-0xfc-
|
|
|
Delta Jt160 6-In 120V Variable Speed Bench Jointer
Used Delta JT160 6-in 120V Variable Speed Bench Jointer. Works great.very lightly used Posted with
|
|
|
Delta Rockwell Steel 6" Jointer Joiner Flared Splayed Leg Stand
Description: Here's a Vintage Delta Rockwell Steel Delta Rockwell Steel 6" Jointer Joiner Flared Splayed Leg Stand. Stands 29 1/4" tall and is in good shape other than needing sandblasting and painted if you wanted to. Has the rubber pads on the bottom of the feet which are worn but they have protected the bottom of the flared legs from getting all worn out from being moved around over the years. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: ... moreCombined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
|
|
|
Delta 6" Planer, Delta 12 1/2" Jointer, Jet DC-1100C Dust Collector w/ remotes
Hello and thank you for looking at my auction. I am selling 3pcs at one time to minimize the costs too me and to the person buying these items. This obviously will be a local pick up only. So one trip for all three saves time and gas. I am inclusing some gates and hoses for the collector and the mobil bases. I have the manuals for all the equipment and they are included. The jointer and collector are wired 220v and I used nice high quality wire(so they wires can be long. so the equipment can be moved in your workshop. I am selling my Delta Jointer that has served me well. It works great and never failed me! I have it wired for 220v and is has a port for a dust collector as well as a mobile base. I moved 2 years ago and since my new babies were born I haven't used it. It has been sitting in my workshop unused. Time to let it go and let ... moresome else use it. I will throw in for free a new set of Delta blades(37-658) Awesome deal! Here are some details about the unit: Heavy-duty 6-inch jointer with three-knife cutterhead and steel stand Center-mounted fence tilts for beveling and chamfering 3/4 HP motor generates 4.800 RPM and a cutterhead speed of 14,400 CPM Measures 46 x 28 x 39 inches(LxWxH) and weighs 210 pounds Large 46-inch table supports stock up to six inches wide Delta 12 1/2" Portable Planer TP400LS with Mobile stand. New blade(Delta blade) and an installed Digital depth gauge from Accurate Technology Inc. digi-kit.com) The Delta 12-1/2-inch planer has been a great performer from the start. This comes to no surprise when you consider the two biggest problem areas in planers. Snipe control and blade changes. Both of these problems have virtually been eliminated with this machine. In addition, look at all of the features packed into this unit. This 12-1/2-inch planer still boasts a four-post cutter head support system and cutter headlock for amazing snipe reduction. The cutter head lock is actually threaded like a bolt, not spring-loaded for positive clamping action and consistent long-term performan
|
|
|
Delta Rockwell No. 667 Cast Iron Stand Base for 6" Jointer or 6" Belt Sander
Delta No. 667 cast iron stand was the"top of the line" base to have on your delta 6" jointer or belt sander/6" abrasive finshing machine. These were only made from 1939 until 1966 and then discontinued. The unique"art deco" design made a unique looking base. The heavy cast iron gave unbelievable stability for these tools. I.e. minimal vibration and movement. Not a lot of them around because they were usually sold to school shops. This one had a short bed jointer on it and if you are going to use it for you belt sander it will work great. However, you will have to find the cast iron pulley guard for it, it was taller than the one that was used on the jointer and the sub-base top piece. The jointer stand is complete and in good condition. I don't see any cracks or extra holes on the stand. The stand will need ... morea repaint. But its not a rust bucket. The stand comes with all 13 slotted oval head bolts and the 4 knurled nuts holding the back panel. The shop made collector port was attached without making any new holes in then seal in place with a laytex sealant. BIN: If you use the"Buy-It-Now" option I will included the"reproduction Delta tag" in the last/7th photo to replace the original that was painted blue. Shipping: This is for local pickup only.
|
|
|
Delta Rockwell 6" Short Bed Model 37-205 or 207 Jointer Gibs & Set Screws
Used gibs and set screws from a Delta Rockwell 6" Short Bed Model 37-205 or 37-207 jointer. Good used condition.
|
|
|
DELTA 6" Variable Speed BENCH JOINTER 37-070 Works Well & Extra Blades See Video
DELTA 6" Variable Speed BENCH JOINTER Works Well& Extra Blades-See Video! See a brief video of this jointer: DELTA 6" Variable Speed BENCH JOINTER Cat No. 37-070 Works Well& Extra Blades-See Video! W orks well. Some minor wear from prior use; could use more cleaning to look even better. Unopened replacement knives included(see last pic) A bout 20 lbs. 31" long. 14" tall, approx. 16" deep. See video link and pics above for details and best description. Please email me with questions or comments. Shipping usps economy I will pack with care& insure! Free local pickup available too. Baltimore MD area.
|
|
|
Delta Industrail 8" Jointer
Show room condition 115 volts, 1 1/2 hp moter. Extra set of knifes.And knife setter. Everthing works great just got bigger jointer l used this jointer for the past 5 years. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1404bffa06d-0xed-
|
|
|
Delta 50-840 Dust Collector for Saw Planer Bandsaw Jointer Sander 120V 1hp 50840
Delta 50-840 Dust Collector for Saw Planer Bandsaw Jointer Sander 120V 1hp A super Estate Sale find from a well equipped home workshop. This great Delta Chip and Saw Dust Collector looks new. No serious wear. Dents, scars or signs of abuse. I hope the photos answer all your questions. I turned it on and it sucks strong. It must be picked up at a residential address in North Richland Hills. Texas a northern suburb of Fort Worth not far from DFW Airport. No forklift or additional help will be available for loading. Bring your pickup. Shipping is not available. The Mobile Base is included. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-1405aa549fe-0x102-
|
|
|
Delta Rockwell 6" Jointer Knives
Used knives for a Delta Rockwell 6" jointer. Used condition. Will need sharpened. Includes what you see in the pics. Check my other listings for more Delta Rockwell parts. Paypal please.
|
|
|
DELTA ROCKWELL LONG BED AUTO-SET JOINTER FENCE FROM A 6" LONG BED JOINTER
The blade of the fence is 35 3/8" long. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
DELTA ROCKWELL 6" JOINTER CUTTER HEAD WITH 3 GIBS, 3 KNIVES & MORE
Also includes 2 bearing holders and one bearing as a size reference. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
DELTA MILWAUKEE JOINTER HANDLE - FITS A 1/2" SHAFT
I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
DELTA 37-350 DJ-20 LONG BED Jointer 8" single ph 220 volt WILL SHIP joiner
DELTA DJ-20 8" Jointer 75" long bed 3 knife cutterhead 8" width 1 1/2HP motor single 110/220 volt(presently wired 220v) Very good condition. Blades need sharpening.
|
|
|
Classic 1940 Delta Rockwell 6" Jointer Model 654 or 37-207
For sale is 1940(Ser. No. 1-1400) Delta No. 654 6" Jointer. It has a single phase. Repulsion-induction,1/2 HP, 110/220 V, 50 HZ,1425 RPM motor. The motor is set to run on 110 volts and when pluged into the current 60 HZ power system the motor runs at 1720 RPM. The jointer does work but needs to be cleaned and adjusted. The stand was sand blasted and repainted a few years ago so it doesn't need much. It doesn't have a belt guard, but that's typical of the older machines. I also have a 1940 Delta 14" band saw for sale. If you buy both the 1940 14" band saw and the 1940 jointer I will provide a 10% discount on the final sale price for both machines. http:www.ebay.com/itm/360734492246 ======= 1940 Delta 14" band saw link
|
|
 |