In 
 
Order by: 
Available to: 
Price: 
 - 
$
1,021.04
Buy It Now
$35 Shipping
Condition: New
Location: USA
$
505.36
6d 19h 5m 49s
0 bids
$50 Shipping
Condition: New
Location: USA
$
568.02
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,002.1
3d 19h 53m 35s
0 bids
$40 Shipping
Condition: New
Location: USA
$
451.23
Buy It Now
$71.25 Shipping
Condition: New
Location: Ireland
$
798.6
Buy It Now
$10 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
418.79
Buy It Now
$50 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
555
3d 14h 31m 43s
0 bids
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
525.14
13h 53m 58s
0 bids
$29.99 Shipping
Condition: New
Location: Dayton,NJ,USA
$
556
3d 17h 51m 12s
0 bids
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
499
3d 13h 16m 59s
0 bids
$49.99 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
568.29
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Rowland Heights,CA,USA
$
1,056
Buy It Now
$0 Shipping
Condition: New
Location: Dayton,NJ,USA
$
603
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
568.03
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
566
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
553
Buy It Now
$50 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
525
1d 21h 4m 12s
0 bids
$30 Shipping
Condition: New
Location: Dayton,NJ,USA
$
538
Buy It Now
$30 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
505.08
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
569.03
Buy It Now
$50 Shipping
Condition: New
Location: Dayton,NJ,USA
$
1,007
Buy It Now
$49 Shipping
Condition: New
Location: Dayton,NJ,USA
$
1,016
Buy It Now
$10 Shipping
Condition: New
Location: Dayton,NJ,USA
$
505.08
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
558
Buy It Now
$0 Shipping
Condition: New
Location: Dayton,NJ,USA
$
549.1
Buy It Now
$20 Shipping
Condition: New
Location: USA
$
2,001.03
Buy It Now
$145 Shipping
Condition: New
Location: USA
$
530.04
Buy It Now
$40 Shipping
Condition: New
Location: Dayton,NJ,USA
$
1,869
5d 13h 7m 12s
0 bids
$100 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,027
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
2,283.01
Buy It Now
$49.99 Shipping
Condition: New
Location: USA
$
1,112.15
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
604
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
570.02
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
569.02
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
469
Buy It Now
$100 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
564.17
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
569.11
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
569.14
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,117.99
Buy It Now
$0 Shipping
Condition: New
Location: Dayton,NJ,USA
$
2,308.93
Buy It Now
$35 Shipping
Condition: New
Location: USA
$
567.02
Buy It Now
$0 Shipping
Condition: New
Location: Dayton,NJ,USA
$
1,897.07
Buy It Now
$0 Shipping
Condition: New – Open box
Location: USA
$
1,897
Buy It Now
$0 Shipping
Condition: New – Open box
Location: USA
$
69
Buy It Now
$0 Shipping
Condition: New
Location: Irving,TX,USA
$
23.99
2d 12h 33m 10s
0 bids
$5 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,123
Buy It Now
$1,000 Shipping
Condition: New
Location: Switzerland
$
29.46
Buy It Now
$1.99 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
1,109.35
5d 19h 13m 14s
0 bids
$1,000 Shipping
Condition: New
Location: Switzerland
$
13
Buy It Now
$0 Shipping
Condition: New
Location: Rochester,NY,USA
$
620.99
Buy It Now
$40.01 Shipping
Condition: New
Location: USA
$
31.04
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
26.61
Buy It Now
$2.99 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
6.58
Buy It Now
$4.95 Shipping
Condition: Used
Location: Monroeville,PA,USA
$
385
Buy It Now
$0 Shipping
Condition: New
Location: Hamden,CT,USA
1 Pc. Techniks Brand New HSK 63F 1-1/4" x 55mm 25K RMP@ G2.5 Balanced Arbor for CNC Routers Features Special 3 screw design improves safety Precision ... moreground taper provides high accuracy Balanced to 25.000 RPM@ G2.5 HSK 63F Arbors Part# Description D L N B GL 41060, HSK 63F 1-1/4" arbor x 55mm, 1-1/4" 55, 42, 20, 45, Other Available HSK 63F Arbors We are offering Bison-Toolmex. HPI-Pioneer, Lyndex-Nikken& Techniks CAT 40, CAT 50, BT 30, BT 40, BT 50, NMTB 30, NMTB 40, NMTB 50& HSK 63A CNC Tooling Kits. Please e-mail me at sales@cecs.us or call me@ 401-490-1141 to quote for your customize tooling kit. Standard CNC Tooling- CAT/BT/HSK/NMTB Balanced 15K RPM@ G6.3 CNC Tooling- CAT/BT Balanced 20K RPM@ G2.5 CNC Tooling- CAT/BT DA. ER& TG Collets Haas. Fadal Pull Studs/Retention Knobs Balanced 20K RPM@ G6.3 CNC Tooling- CAT/BT/HSK Balanced 20K RPM@ G2.5 CNC Tooling- CAT/BT DA. ER& TG Collets Pull Studs/Retention Knobs Standard CNC Tooling- CAT/BT/HSK/NMTB HSBalanced 20K RPM@ G2.5 CNC Tooling- CAT/BT SK/LSK. MMC,VC,Bulleyes& 3 Lock Holders DA. ER& TG Collets Pull Studs/Retention Knobs Balanced 18K RPM CNC Tooling- CAT Balanced 25K RPM@ G2.5 CNC Tooling- CAT/BT/ISO DA. ER& TG Collets Pull Studs/Retention Knobs 10 Reason to bid or buy my listing or products from eBay We do accept world the most secure& reliable payment method“PayPal” Listings are described with detail information. Every listing or items have digital images from every angle from buyer’s perspective. You will get what we are advertising on eBay no substitute or alternative products. We are not listing anything on eBay. Which we do not have in stock so; you will get your won products definitely. Prompt Shipping- As soon as we get the payment we are shipping products as per customer instruction. Prompts Feedback– We left positive feedback as soon as we ship your products. We do not wait for buyers to leave feedback first. So, you have 100% guarantees that you will get the feedback as soon as complete the transacti
$
564.99
Buy It Now
$500 Shipping
Condition: New
Location: Switzerland
$
212.93
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
14.42
Buy It Now
$4.95 Shipping
Condition: Used
Location: Monroeville,PA,USA
$
21.2
Buy It Now
$0 Shipping
Condition: New
Location: Mission,KS,USA
$
245
Buy It Now
$0 Shipping
Condition: New
Location: Hamden,CT,USA
1 Pc. Techniks Brand New ISO 30 1-1/4" x 40mm 25K RMP@ G2.5 Balanced Arbor for CNC Routers Features Special 3 screw design improves safety Taper ... moreground to AT3 specifiaction for accuracy Balanced to 25.000 RPM@ G2.5 ISO 30 Arbors Part# Description L GL D B N 12700-40-W, ISO 30 1-1/4" x 40mm arbor, 40, 42, 1-1/4" 20, 42, Other Available ISO 30 Arbors We are offering Bison-Toolmex. HPI-Pioneer, Lyndex-Nikken& Techniks CAT 40, CAT 50, BT 30, BT 40, BT 50, NMTB 30, NMTB 40, NMTB 50& HSK 63A CNC Tooling Kits. Please e-mail me at sales@cecs.us or call me@ 401-490-1141 to quote for your customize tooling kit. Standard CNC Tooling- CAT/BT/HSK/NMTB Balanced 15K RPM@ G6.3 CNC Tooling- CAT/BT Balanced 20K RPM@ G2.5 CNC Tooling- CAT/BT DA. ER& TG Collets Haas. Fadal Pull Studs/Retention Knobs Balanced 20K RPM@ G6.3 CNC Tooling- CAT/BT/HSK Balanced 20K RPM@ G2.5 CNC Tooling- CAT/BT DA. ER& TG Collets Pull Studs/Retention Knobs Standard CNC Tooling- CAT/BT/HSK/NMTB HSBalanced 20K RPM@ G2.5 CNC Tooling- CAT/BT SK/LSK. MMC,VC,Bulleyes& 3 Lock Holders DA. ER& TG Collets Pull Studs/Retention Knobs Balanced 18K RPM CNC Tooling- CAT Balanced 25K RPM@ G2.5 CNC Tooling- CAT/BT/ISO DA. ER& TG Collets Pull Studs/Retention Knobs 10 Reason to bid or buy my listing or products from eBay We do accept world the most secure& reliable payment method“PayPal” Listings are described with detail information. Every listing or items have digital images from every angle from buyer’s perspective. You will get what we are advertising on eBay no substitute or alternative products. We are not listing anything on eBay. Which we do not have in stock so; you will get your won products definitely. Prompt Shipping- As soon as we get the payment we are shipping products as per customer instruction. Prompts Feedback– We left positive feedback as soon as we ship your products. We do not wait for buyers to leave feedback first. So, you have 100% guarantees that you will get the feedback as soon as complete the transac
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
High Speed Router Spindle 15HP PERSKE Model#FRL 90.14-2 SPINDLE# M02 58 031 Weight: 135lbs Spindle was removed from a Thermwood Cartesian 5 CNC Router. If you have any questions about this product please contact us by email: sales@davincicorp.net or call(615) 367-1700. Thanks for looking!
High Speed Router Spindle 15HP/ Yaskawa AC Inverter Package PERSKE Model#FRL 90.14-2 SPINDLE# M02 58 031 Yaskawa Varyspeed AC Inverter CIMR-H11B.G07 Weight about 200 lbs. combined Spindle and drive where removed from a Thermwood Cartesian 5 CNC Router. If you have any questions about this product please contact us by email: sales@davincicorp.net or call(615) 367-1700. Thanks for looking!
Engineering Surplus Supplies& Used Equipment Auction Terms Shipping Policy Return Policy Visit Store Join Newsletter Description SHODA CNC ROUTER DRILL SPINDLE 3 PHASE RPM: 3.390 PLEASE SEE PHOTO FOR INFO PLATE TOTAL LENGTH: 37" CHUCK: 13 mm Comes Exactly as shown in pictures. ITEM LOCATION:90016 LOCAL PICK UP FREE INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The above item description may have been taken from the internet for reference about the product. This information is to be used as an information reference only and not as a guarantee by TRINITY SURPLUS. Make Your Offer $499.00- You may be interested in on eBay. Industrial, USED ITEMS ARE TESTED AGAINST D.O.A. THEY ARE NOT REFURBISHED UNLESS STATED. NOT CALLIBRATED UNLESS STATED. Payment must be received in full within 7 days of the closing sale ... moredate. Confirmed paypal addresses are required for items over $200. Payment is accepted via PayPal. Personal check, cashier's check, or wire transfer. Items will be held until full payment is posted and cleared INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The buyer is responsible for all shipping. Handling, and insurance costs prior to shipment. No Insurance Unless stated. Shipping is available to all 50 states. Outer lying territories. Items will be shipped within 4 business days of receiving a cleared payment. Shipments will be carried via UPS. FEDEX, or USPS at our discretion. Insurance and signature confirmation are required for item purchases over $400. Combined shipping is available for items purchased within a 7 day period HANDLING FEES. $3.50 For items between 1-7 lbs needing standard packing. $4.75 For items between 8-20 lbs needing standard packing. $7.00 For items between 21-35 lbs needing standard packing. $9.00 For items between 36-80 lbs needing standard packing. Returns are accepted within 7 days for items which are DOA or not as described. The buyer must report listing or description errors within 7 days of re
This auction is for one Emco spindle drive from an Emcotronic controller on an Emcoturn lathe. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13eae4e3a3c-0x105-
Small to mid size router spindle. Complete with Mount and Z plate fixture and dust vacuum shoe. 30 K rpm Extremely quiet for its power and RPM. Was only utilized for approximately three weeks on a machine designed to make blinds turns out the pneumatics of the machine were too slow to keep up with the spindles so we ended up designing a punch. these are great little bolt-on solutions for small to mid CNC projects utilizes a drill chuck for tools. Price is just for one unit I have a total of four to sell Posted with
COMPLETE CNC ROUTER KIT! This is a 24"x 24" x 4.25" CNC KIT. It's milled from 6061 aluminum. 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis. Supplied with grade 8 bolts; 16mm Ball Screws with bearings and a nut on both ends to relieve stress on the motors and hold the precision. This unit is a kit, which means the X&Y will not be assembled. The Z will be assembled and simple tools will be needed to put the X&Y together. SPECS: X&Y&Z 20mm rods and bearings X = 24 inch table APPROX 30 inches Y = 24 inch table APPROX 30 inches Z = 4 ¼ inch X. Y and Z 16mm Lead 5mm Ball Screws Accuracy.001 3 = Nema 23 270 oz stepper motors 3 = precision motor couplers 1 = 4 axis's controller 3.5 amp 1 = 24v. Power supply 1 = db25 cable 1 = Spindle mount for supplied Spindle ... moreHere's the"Low Down" on this unit. PLEASE READ EVERYTHING! I purchased the kit here on Ebay from Ed. A reputable dealer that has been always eager to help. I decided to go a different direction and get a bigger machine. This machine is about 1 year old but has only been assembled for 6-7 months and only used twice to cut a couple of test pieces on wood. I had also purchased a 1HP water cooled spindle from UGRACNC and a 110V VFD to control the spindle. The spindle runs up to 24000 RPM and its supper quiet. Its brand new and never seen any water or a job. The VFD is top quality purchased from Wolf Automation and its also brand new. I will also supply the hose for the spindle and the water pump(if I can find it) I have decided to keep the original motors and controller and power supply that way the winner will get new stuff. Only thing not supplied are the limiy switches that are sen on the pics but they are not good so I got rid of them. Brand New Nema 23 270oz stepper motors Brand New 4 axis's controller 3.5 amp Brand New 24v power supply Plus the cable is also new(25ft) A few other parts are also new and wrapped still. This unit will take an evening to pu
PDA PC/50 Two Spindle CNC Router With CamStar Controller 208/230/480V 5.6/2.6A 3Ph 60 Hz UNTESTED SOLD AS IS Powered by The free listing tool. List your items fast and easy and manage your active items.
Used Perske 7hp 380/480V 300hz CNC router spindle. Air Cooled. 18000 RPM max. spindle speed. SYOZ 20 spindle, includes spindle nut and a single 1/2" used collet. Was removed from a running machine. The machine it was removed from was used primarily for plastic prototyping work. The control indicated 26k hours of use, but it is unknown how many of these hours was with the spindle on. Worse case scenario is 26k hours. The spindle ran fine when removed with no funny sounds, smells, or runout issues.
This Thermwood Model CS40 CNC Router comes out of a small cabinet shop in Southern California. The machine includes a 10HP Spindle with 5 Station Auto Tool Changer. An 18HP Vacuum Pump as well as a nice multibag dust collection system. One of the best benefits of the Thermwood brand is the eCabinet Systems Software that is included. ECab is a custom cabinet design program powerful enough to drive a custom cabinet business from design to fabrication. This type of software can cost up to $30,000 when purchased independently. The specifics are as follows: Used Thermwood Model C40 CNC Router New in 2004 4’x8’ Moving Table 10HP HSD Spindle with Auto Tool Changer 18HP Vacuum Pump 10HP Dust Collector. ECabinets Systems Software Ready. Location: Southern California. For more info call us at 800-394-1128
Used Holzher Uni-Master 7226 CNC Router New in 2006 S/N 202/0-406 5000427 12HP Spindle with 12 Station Tool Changer 18 Spindle Drill Bank 40HP Kaesar Vacuum Pump Includes 12 Bag Airworks Dust Collec tor This machine has been professionally packed and prepared for shipment. It is currently in storage in Tulsa Oklahoma. Loading is included in the price.
VELOX CNC Router 5" Linear Slide Actuator with S urestep 276oz Stepper and Hitachi 2 1/4 hp spindle Was removed from working cnc router. Ready for DIY cnc router or upgrade to existing router. This axis served me well. I created many hobby parts made from delrin. Plastics, and aluminium for RC Helicopters plus many wood projects. Originally i used a porter cable router motor but it was very noisy and spindle runout was unacceptable. So i replaced it with the very quiet Hitachi m12vc that has less than.001 runout. The linear travel is very smooth with no measurable backlash. Last pic on the right is some of the part i machined with this spindle assembly. What you see in the pics is what you get except for the machined example parts in last pic. I will ship USPS priority within 2 business days from cleared payment. Please pay within within ... morethree days of purchase date. ANY QUESTIONS PLEASE ASK BEFORE BUYING OR COMMITTING TO BUY Specs: Travel 5" 4 qty 20mm shafts and bearing. Top and bottom leadscrew support. Leadscrew pitch is.1. 10 revolutions = 1.0" one start lead. Resolution of leadscrew is.0005" or better. leadscrew and anti-backlash nut. Hitachi M12VC 2-1/4-Horsepower Variable-Speed Router Sure Step 276oz 4 wire 2.8a stepper.
CNC drilling machine router kit with motors. Control board without spindle motor kit is unassembled. All parts are included( chassis.Screws, nuts, axis, etc. Stepper motors are: VEXTA C8513-9012K. 1.8°, DC3.8V 1.27A DC motor is: Reliance Electric 3.175 ER11 made in USA DC 24 ~ 100V 200 W 3000 ~ 8000 rps CNC is 43x41x35cm. Horizontal X and Y is 30cm, vertical Z is 14cm, working area is ~ 19cm X 24cm drill holder is ERNUT ER11. Motor 200W, all parts are included chassis, screws, nuts, axis, etc, material is 10mm PVC and metal parts. More photos: http:imageshack.us/photo/my-images/38/dsc05213wt.jpg http:imageshack.us/photo/my-images/818/dsc05213e.jpg http:imageshack.us/photo/my-images/10/dsc04829t.jpg http:imageshack.us/photo/my-images/820/dscn89811.jpg http:imageshack.us/photo/my-images/830/dsc05210b.jpg datasheet for controlling board ... moreis here: http:uploading.com/files/187a61d6/controlling%2Bboard%2Bmanual.doc/ weight is ~ 12 kg shipping by DHL express or EMS express from hongkong all my listing is here:
1.5KW Water Cooled Spindle with 7 Piece Shars Collet Set plus 2 EXTRA collet nuts and 2 extra collets 1/8" and 6mm This spindle was a spare for a CNC router I sold. The spindle had never been removed from it's box. I used this spindle for a short time to test a new larger machine I was building. The new machine was to have a 2.2KW spindle. So as soon as the larger spindle came in, this was again a spare. The spindle has only 2 to 3 hours on it. It is in excellent running condition. The spindle is 80mm(really 79mm) in diameter and 200mm in length. It weights about 9 pounds. The spindle uses standard ER11 collets. A 7 piece collet set from Shars is included. This is an inch set with sizes 1/16" 3/32" 1/8" 3/16" 7/32" 1/4" and 5/16" There is also an extra 1/8" collet and the 6mm collet that came ... morewith the spindle. There are also two extra nuts. Which makes three. This allows you to keep your favorite collets mounted in a nut for quick change. The unit is designed to be driven by a high frequency VFD. The Huanyang VFD available here on eBay is an excellent choice. Be sure to use a VFD rated for 1.5KW or larger. These spindles are intended to be run at 6000 to 24000 RPM. They loose torque quickly below 6000 RPM. So make sure you use a VFD capable of outputting 400Hz. Unit will be shipped UPS to an address the 50 United States. Paypal is prefered.
AutoRout 3 axis CNC Router. 5x8ft table, ball screw and servo drives, vacuum table, 6" stroke, 10hp Colombo ATC spindle, 4 tool rack, 5hp dust collector, Aerotech PC based controller. We have all controller and router documentation. This is a very rugged and heavy router that can easily machine aluminum. All plastics, wood, foam, etc. with the 10hp spindle. The router is in perfect working condition in a manufacturing environment. We are selling to make room for another new router. I can demo this router for you anytime. Videos: Shipping: Buy must pickup the router and all associated parts in San Diego. CA USA. I can recommend a company for local pickup. Seller is not responsible for any shipping or shipping costs.
Store Categories, Store Categories, 220V CNC 3040T-DJ upgrade from 3040T 3040 Router with 230W 11000RPM spindle, Descroption, Major improvements and upgrades part: 1, the main structural material all dedicated die extrusion material protection as one million units of the quality and appearance quality; Major surface anodized; Workbench new design from the original three small changed to two. Z-axis and spindle module integration, absolute safeguard spindle mounted vertically; imitation by no less than the original capital imitation can not be friends. 3. The spindle motor switch to the new DC motor, speed up to 11.000 rpm, the speed increases, the benefits of self-evident, the measured performance over the original second-hand goods. 4, electric control part to replace all cabinet using custom dedicated chassis; toroidal transformer + PWM ... morepower module + the T65 the triaxial one driver of Professional configuration; newly designed T65 axis drive more than the old compatibility and scalability the detached drive, spindle control and speed control part of the more basic specialization. X.Y,Z Working Area: 390×280×55mm Max. Feeding height: ≤70mm Outside dimension: 615×485×390mm Table size: 525×320mm Lathe structure: 6061/6063 Aluminium alloy Stepping motor: two-phase 57/1.8A Drive unit: 1204 Double thread Trapezoidal Screw Sliding unit: Chromeplate shaft Maximum speed: 11000mm/min Engraving speed: 300-3000mm/min Repeat positioning Accuracy: 0.05mm Spindle motor: 230W DC spindle motor Spindle speed: 11000RPM/MIN Cutting tool-holder: ER11/3.175mm Interface:Parallel port Software Compatability:Mach3/Emc2.Type3,Wentai, ArtCAM) Command code: G code/nc/ncc/tab/txt Machine weight: 28kg(including packaging) Package Include. 1× Engraving machine· 3× Axis motors· 1× Tool box and tools· 1× Power cable· 1× Parallel cable· 1× Control box Shipping, Payment, Returns, Contact us, Please see the shipping method/carrier for this item under the Shipping tab
Reluctantly selling my Zenbot brand 2424 CNC desktop router as I have moved on to other projects(too many to list! I purchased this CNC a couple years ago as a hobby business and it has not really seen much use at all. Just a few little experiments and projects. It has a usable area of about 24 inches square and the Z up and down travel is about 4" This is a complete system that comes with a Hitachi Hitachi M12VC router that has been upgraded to use Precisebits.com collets. These collets significantly reduce run out tolerance and reduces bearing wear on the router. The unit will be shipped in the same shipping box that came from the manufacturer. I received the unit with the gantry removed and I was able to easily put in the few bolts to assemble it. The buyer will do the same. The unit comes with a G540(Gecko) controller that is mounted ... morein a controller box. The controller box has a relay to turn the router on and off when it starts and finishes a project. It can also be setup to turn a shopvac on and off automatically. However it will need another external power supply. I purchased this unit separately as the G540 was not an option at the time for Zenbot. The G540 controller is now an option when buying a new Zenbot. I used the machine on occasion to make crafts and other hobby stuff. I have included a picture of the fretwork bracket that I made. The machine was driven by LinuxCNC controller software. However, I highly recommend to use the Mach3 software. Getting LinuxCNC setup took a lot of time and I was never happy with it. However, I was able to successfully cut several projects. The Mach3 software configuration files are freely downloaded from Zenbot so you don't have to figure it out for yourself. I am also going to include my miscellaneous set of tooling. There is probably about $50-$75 of bits and tools for you to work with. All you need is a PC. Mach3 software, some patience to get all the configuration settings right and you are off and running. Also, there is a learning curve to using these m
You are bidding on the following item: Used Multicam 1000 Series CNC Router New in 2008. 4’x8’ Vacuum Table. 4HP Variable Speed Spindle. 15HP Vacuum Pump Includes EnRoute Software Dongle Key. This is an ideal machine for a Sign Shop type application! The model sells new for over $50.000. Installation and Training Available. Location: Phoenix AZ. Price includes loading machine on to your truck. We can help with the shipping and installation arrangements. Call us a 845-267-2985 to discuss!
Up for sale is my 3 month old CNC router. I have been using this machine to make aluminum parts(6061. 6063 and 5052) with great success. The router is a solid all aluminum construction and able to accurately cut a variety of materials. This router will come almost ready to run. All you need to provide a cheap desktop computer with a parallel port. Software. XML files and Mach3 license will be provided on a jump drive or CD. This will make setup much easier for you(XML files contain all the calibration and motor tuning information) Serious inquiries only. Open to reasonable offers. Will deliver within a negotiable distance. Feel free to ask any questions you may have. Thanks for looking! Included: CNC router base w/ full width T-slot table(Y axis) CNC router gantry(X and Z axis) heavy duty extruded aluminum stand/legs w/ leveling feet- 4 stepper ... moremotors w/ custom shielded cables and flex couplings- Gecko G540 stepper driver w/ DB25 parallel cable- 48VDC 12.5A power supply for stepper motors- XHC wireless"MPG" control pendant w/ USB transmitter/receiver- 1.5kW 220VAC water cooled spindle- VFD spindle drive w/ on/off relay- spindle cooling system; pump. Reservoir, radiator and fans- manual cutting lubrication/mist setup- Mach3 license(full version) SheetCAM TNG license(full version) Tooling: 1/16" 2-flute(x2) 1/8" 2-flute(x7) 1/4" 2-flute(x4) 1/8" 90* V cutters(x5) Most brand new, never used. Kyocen and Destiny) ER11 Collets: 1/8" x2) 1/4" 4mm and 6mm Not Included: PC w/ parallel port- control box(electronics are currently temporarily laid out on a wood panel) Specs: 26"X) x 41"Y) x 6"Z) machining area- heavy duty 60mm x 60mm extruded aluminum frame and legs- full width aluminum T-slot table- supported linear guide rails- C7 ballscrews- dual ball screws on Y axis- 1.5kW 220V spindle(ER11 and water cooled) + VFD- Spindle water cooling system(Koolance pump/res) + 240 radiator with 120mm fans- Gecko G540 and upgraded 48VDC 12A power supply- Four(4) 380oz.in
MultiCam 1000(A) Series 4x4 CNC Router Model: A-101 Voltage: 208V Single or Three Phase(10 Amps) Year: 2003 See all specifications below. Very Good Condition MultiCam 1000 Series 4x4 CNC Router This machine was originally named the A series but in 2004 this model remained nearly identical but changed it's name to the 1000 series. Today this machine still shares design characteristics and parts with two current models. The MultiCam Classic and MultiCam 1000 series. FUNCTIONAL GUARANTEE. WE DO NOT SELL MACHINES THAT DO NOT RUN! 100% positive feedback! This is a great machine and can be seen and inspected under power! Would be an excellent choice for a sign shop looking for their first CNC or upgrading from a bolt together entry level machine. MultiCam is the industry standard for top quality engineered CNC Routers built proudly in the USA. ... moreI sold this machine new in 2003 and provided the original owner with training and support. Original owner came into some money and upgraded to new machine with larger table size. Auto tool changer, and vacuum hold down. They loved this machine and their shop space was limited so they had to move this when the new machine was delivered. That is the only reason it is available now. It is a great machine! The original owner was using EnRoute 5 Pro Cad/Cam software with this machine. They will be keeping their software to use with the new machine. Full line of EnRoute Cad/Cam software is available but not included. This machine is a 1 owner machine! MultiCam designed the machine so you could convert the table to a vacuum hold down system at a later date if desired. This machine can fit in a standard 2 car garage and can be used at home if needed! Machine Specifications: 50"x50" work area 650 Inches Per Minute Traverse Speeds Dual motors on X axis gantry Custom engineered aluminum extrusion gantry Aluminum Extrusion T-Slot Table Welded Steel Tube Base Frame 3 HP Colombo Spindle programmable from 4.000 to 18,000 RPM ER 25 Collets included with machine 1/8" 1/4"
Quote#25757#VR824TG KOMO 5-SPINDLE CNC BRIDGE-TYPE ROUTER New 1994. Serial No 1110703, Model VR824TG, EQUIPPED WITH: GE/Fanuc 16M CNC Control w/Macro B Programming And 4266 M Extended Memory(Pendant Mounted) 1) 16 HP Colombo 18000 RPM Router Head w/Pushbutton Activated Drawbar(2) 3 HP Piggyback 21000 RPM Router Heads w/Pressure Foot For Each Spindle(Collet Range 1/8" to 1/2" 2) 1.5 HP Hypneumat Automatic Feed Drill Heads w/Hypneumat Pressure Foot For Each Drill& 6" Stroke(5) 8' x 5' Modular Table Sections CATALOGUE SPECIFICATIONS: Table Dimensions. L x W. 306" x 96" Longitudinal Travel(X-Axis) 306" Cross Travel(Y-Axis) 96" Spindle-Head Vertical Travel(Z-Axis) 8" Spindle Center to Center. Adjustment. 10.5" to 22" Programmable Feeds. X, Y, Z Axis' 0001 to 600 IPM Rapid Traverse. ... moreX& Z Axis' 600 IPM Rapid Traverse. Y-Axis. 1000 IPM Hypneumat Drill Speed. Range. 150 to 5400 RPM Piggyback Router Speed. Range. 7000 to 21000 RPM Colombo Router Speed. Range. 1800 to 18000 RPM Colombo Router Taper. 30 w/V" NOTCH Overall Dimensions. L x W. 33' x 20' Weight Approximately. 40000 LBS NOTE: Machine Appears To Be In Very Good Condition As Taken From Service From An Aerospace Plant. Replacement Price Is Over $675.000.00. PRICE: F.O.B. OUR WAREHOUSE. $69.500.00. MACHINE/EQUIPMENT SUBJECT TO PRIOR SALE.
Installation available in Wisconsin 54" Y-axis. 212" X-axis, 15" Z-axis MP-19 Boring Head Horizontal Boring 14 HP spindle 8-position tool changer(8) Rails with 4 pods on each PC front end w/Genesis software Safety Mats As Taken From Service Stock Number: L-1-237 Machine can be loaded at no charge. Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes ... moreup to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Powered by The free listing tool. List your items fast and easy and manage your active items. 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13ffe8cec1d-0xf4-
SPINDLE MODEL 18630-106 WITH Z AXIS- PACIFIC SCIENCE 33VM62-220-19*USED* 19" long- weighs 24 lbs.
CNC Mill Router Engraver- Complete and Ready To Go Up for sale is my 3 month old CNC router. I have been using this machine to make aluminum parts(6061. 6063 and 5052) with great success. The router is a solid all aluminum construction and able to accurately cut a variety of materials. Everything is basically new, obviously with some wear from usage. But everything is fully functional and ready to go. It cuts accurately and consistently. This router will come ready to run. Everything you need. Including tooling and collets. A licensed copy of Mach3 will already be installed on the control PC and configured to the machine. Just reassembled, hook up power and start cutting. Easy as that. If you are local I can assist in setup. I am also including an XHC wireless pendant control. All electrical components are house in a custom steel cabinet ... morethat is powder coated in a textured white. Includes 3 cooling fans with dust filters(2 on the front for the spindle radiator and one on the side to cool the Gecko G540. Everything inside is wired up and ready to machine. Just plug everything in and you're good to go. The CNC router: Machining area: 26"X) x 41"Y) x 6"Z) 80/20 frame- 30 series, 60mm x 60mm, very rigid, adjustable height feet Aluminum T-slot table Supported linear guide rails, C7 ball screws, Dual ball screws on Y axis, Keeps the machine square during heavy cuts 1.5kW 220V spindle, ER11 collets, IGUS cable carrier, hold spindle power cable. Water lines and flood coolant line Four(4) 380oz.in stepper motors, DB9 connectors, Flex couplings, Manual flood coolant sprayer, Uses pump canister, Spray tool/part to keep cool. Lubricated and clear chips, Better than"chasing" the tool with a can of cutting oil/WD40 Tooling and Collets: Qty.4- 1/4" 2-flute- Upcut- Destiny, Qty.8- 1/8" 2-flute- Upcut- Destiny(3) and Kyocera(5) Qty.5- 1/8" V-Cutter- 90 Degrees- Kyocera, Qty.2- 1/16" 2-flute- Upcut- Kyocera, Qty.2- 1/8" collets, Qty.1- 1/4" collet, Qty.1- 4mm collet, Qty.1
columbo 5hp cnc spindle. fully tested in good used condition. Er25 collet(max 16mm) Dual voltage 220v(set now for uk inverter) or 380v 3 phase. 24000 rpm at 400hz. was machining plastics so not worked hard! Air cooled(fitted high speed fan) I have a video of it running- quite welcome to come and test before purchase. very expensive to buy this quality new! I do have a 380v 3 phase inverter available seperately if required. Any questions just ask.
Custom built cnc router with 3 hp HSD spindle. all welded steel construction with thompson ball screws and linear rails. 1200 oz stepper motors driven by gecko 212 drives with a PMDX 126 board and power supply with tyrodial transformer. Real 3 hp HSD spindle spindle with GE Drive, computer with Mach 3 software. under power and ready to run. used to cut PVC sheet. come and see in operation if needed. everything is in perfect working condition. please contact me for shipping charges.
Giordano Colombo Spindle Motor for CNC Mill Engraver Router Model: RV90.2SR Type: IP54 HP: 5/ 7.5 A: 12 Volts: 220/ 330 KW: 3.7/ 5.5 Hz: 200/300 12000/18.000 RPM 3 Phase Collet holder size ER32 Spindle is used. It has been tested, in good working condition, There are some scratches, dings Sold and come as picture Thanks for viewing and check out our other auctions@No reserve!
1.5kW Spindle w/ ER11 Collets. 220V Huangyang VFD and Cooling System This is a used and complete spindle drive and cooling system. It is a working pull from my CNC router that saw very little use. I estimate less than 20 hrs of operation time. Everything you need to get your CNC router or mill spindle operational is included in this listing. Spindle The spindle is a water cooled 1.5kW 220V spindle that uses ER11 collets. The spindle bearings spins smoothly and with almost no run-out. It spins quietly. Even at 24,000 RPM. It is well balanced and powerful enough to cut aluminum without issue(aluminum is all I used my router for) VFD The spindle drive is a 220V Huanyang VFD that is able to drive the 1.5kW spindle up to 24.000 RPM. It runs cool and interfaces with the machine controller(I used a Gecko G540) nicely for automatic ON/OFF and spindle ... morespeed control. Cooling The spindle is cooled by a Koolance pump system and large radiator. It runs quietly. Keeping the spindle cool and ensuring the bearings do not overheat. This includes the pump, radiator and fittings for the spindle inlet and outlet. Included in this listing: 1.5kW water cooled spindle, Huanyang VFD spindle driver, spindle motor cable w/ connector, VFD power supply cable, ER11 collets: 4mm. 6mm, 1/8" and 1/4" Koolance pump, Cooling radiator
Perske German made CNC router spindle motor CNC Gerber dimension 200x Works runs spins cuts engraves etc Very hard ti find and very expensive new this was taken off our gerber dim 200x RUNNING and replaced with a bigger HP motor that is the only reason 3 phase 28k rpm
Perske 15 HP Router Spindle W/ Controller Removed from KOMO VR1010 CNC Router Click to Enlarge Click to Enlarge Click to Enlarge Thank you for visiting mister-surplus. We sell both new and used items. Most are surplus items previously used by private companies. Government institutions and agencies. Customer satisfaction is our#1 priority. Up for sell is Perske 15 HP Router Spindle W/ Controller that's been removed from working KOMO VR1010 CNC Router Please see all the images fro more info. 14 Days Money Back Warranty from the day of delivery! Comes exactly as pictured. We do our best to describe all items to the best of our ability. Please do not assume that accessories or the condition is other than described in the description. Any questions please feel free to ask. Please see photos and Policy for more details. Please see other items ... morefor other great deals. LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! Our business located at 827 N Rengstorff Ave. Mountain View, CA 94043 24 hours notice is required prior to pick up. Payment: Paypal* Visa. MasterCard, American Express, Discover* Santa Clara County sales tax will be applied if you are a California resident. Terms: All shipping costs are non-refundable for any circumstances. Buyer pays all freight costs for returning the product(s) All returned items must be the same condition as shipped in order to receive a refunds. 20% restocking fee applies to customer errors. Returns(RMA) If you have an issue with your item once it is received. Please email through eBay and we will try our best to help resolve the problem. If your item is in need of a replacement. Repair, refund or exchange, please email through eBay for instructions. Contact: Please ask your questions through eBay messaging system. Business Hour: Monday- Friday 10:00am- 5:00pm PST Payment Terms Payments must be received within 10 business days after our confirmation was sent to all winning bidder(s) Otherwise. The order is cancelled and a negative feedback will be given to the buyer a
HSD High Frequency CNC router spindle. Lightly used in good working condition. ER25 collet(max 16mm) 220v 3 phase. 18000 rpm at 300hz. air cooled(shaft driven high speed fan) Very expensive to buy this quality new!
High Frequency CNC Router Spindle Motor. ER 25 Nose Collet 5 Horsepower, 3.7 KW Dual Voltage 220 or 380/440 Volt, 240000 RPM 400 Hz. Very Smooth Operation. Ceramic Bearings. Item is currently configured for 220V operation. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-142019cde71-0xf7-
Used CNC Router Spindle with Automatic Tool Changer ISO-25. Ceramic Bearing, 18000 RPM@ 600 hz 380V 3 Ph 5.5 Horsepower 4KW Serial#1294. Includes Matching Yaskawa Varispeed 616G3 Inverter Drive 400V class 380-460 Volt Input 3Ph 0-460V Output 600hz Model CIMR G3E45P5. Includes Braking Resistor. Removed in working condition from a Masterwood CNC Machining Center.
Drill Head from Masterwood Project 313 CNC MachiningCenter 13 vertical drills(5 x 9) 4 horizontal drills(2x + 2y) Includes Pneumax solenoid air cylinders to activate andlower drills singly or together Includes heavy duty round linear bearings and rails 6” Z axis stroke entire drill bank 3” Z axis stroke individual drills 1.5 KW(2 horsepower) 220 Volt or 380 Volt 3 phase 50/60hz 3360 rpm Documentation available. Just ask Weight: 135 lbs Dimensions: 23” x 15” x 7”
T-TECH QUICK CIRCUIT 7000S PCB PROTOTYPE Router Table DC Spindle CNC Engraver This unit is for parts or a project as it will need a Z axis solenoid as for some reason is was removed. Spindle motor looks complete. We only have the XY table shown in the pictures. Parts are available for these units as T-Tech is still in business and selling parts and PCB materials. Milling bits, and accessories for your particular project T-Tech Quick Circuit 7000 PCB prototyping system for fabricating PCBs. This is the full-size model 7000 unit. Not the smaller 5000 model. This unit has a variable speed spindle motor and with the proper driver can provide true variable speed spindle control. Create prototype PCBs in house. Saving time and money. Highly accurate XY system can mill traces down to 5 mils, and drill holes down to 13 mils. High precision stepper ... moremotors and track provide resolution and accuracy to 0.25 mils. Variable speed spindle provides compatibility with virtually any material and bit(uses standard 1/8 collet bits) This machine can also be used for other milling tasks- such as engraving or other milling. Table moves smoothly throughout the full large 17.5" x 11" milling area on nicely mounted THK Rails. Aluminum construction is solid. Table is sturdy 3/8” Aluminum plate. This is T-Tech's largest model, which takes full sheets of standard 12" x 18" PCB copper material. site. This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with Fedex Ground to lower 48 USA. AK. HI, PR to pay actual shipping. Canada- please contact us for shipping quote. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. Sold with a 14 day not DOA satisfaction guarantee. CMB_gsrx_vers_526(GS 6.6.6(526)
SCMI Mimatic Tool Systems Prod- Nr 13.1711.0264.211.3 Serial-Nr 50091 Aggregate Head for CNC Router- Spindle only Excellent condition. Hardly used
Gamfior motor spindle 46000 1/min 5.5 KW 350v 766HZ 15A 3 phase 2 pole Beautiful Italian motor cnc mill router spindle Listing as used. But it appears as if it was never used, no marks. In box with pack in place foam. Item is very expensive and large-heavy. Weight approx 50lbs. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14384fc3cb3-0xf6-
Precise High Speed Milling Spindle Motor CNC Mill Engraver Router Type SC 120-0 Serial No. 120-018 Volts: 41-262 Hz: 125-500 RPM: 7500-30000 Power(KW) 1.1- 4.5 Amps: 14.0 Full Load HF: 3 Phase 2 Pole Collet holder type ER25 AOL: 19" Dia: ~4.75" 120mm) Spindle appears to be used. It has been tested with Delta VFD, good working condition, There are some minor scratches, dings, scuff Power cable is not included Sold and come as picture Thanks for viewing and check out our other auctions@No reserve! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-143bb577772-0xfc-
This auction is for one Emco spindle head and drive motor pulled from an Emco F-1 CNC mill. These heads take a standard 30 taper tool holder. The quick change lever on the side releases the tool. Thank you. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1440ae28a0c-0xe2-
CNC MILL Grind Drill Tap Router Machine 26"x114"x15" XYZ/ 670mm x 2895mm x 380mm XYZ Working Area 3 HP Spindle Used for about a Month Selling Because no space available for it For questions Please Contact us on EBay T his CNC machine is custom made to typically handle Aluminum work like a milling machine I t was build to grind. Drill& tap on a square aluminum& Plastic tube for other CNC machine parts F ront of machine can have an extra 10" depth clearance under the 15" Z axis clearance to take deeper items like box etc. the working XYZ of the front deep area is X 26"x Y 14" x Z 25" 15" Z and 10" extra clearance) H olding vise are installed on T-Slot square tube T-Slot Tube can be added base on holding need V ise are all expandable to hold up to 26" D rill& Tap motor can be ... moreadded to the machine with fully automated direction and RPM from software Optional items/ That we will add at extra cost High Torque Steel Drilling& Tapping Spindle 3000 RPM 2HP Spindle speed/Direction controlled by software 4 Speed mechanical pulley to increase speed& Torque mechanically If you require more options Please notify us so we can discuss it Strong structure. Heavy base, 10"x 5"x 1/4" Square tube Precision ground Metal Square Tube for rail& Rack High end Electro-Mechanical components Industrial mechanical components linear square rail Precision C5 class rolled ball screw on Z Precision Rack& pinion on XY Micro stepping motors Spindle 3 HP 24000 RPM Mach3 controller Shipping cost below might vary depending on location this is just a close estimate. We might need to get you an exact shipping cost to your postal or zip code. Specifications X. Y, Z Working Area 26"x114"x15" XYZ/ 670mm x 2895mm x 380mm. X. Y, Z Resolution ±0.00016” X. Y, Z Repeatability ±0.0018" X. Y, Z Transmission System Z Ball Screw 25mm. X Y Rack& Pinion with 10:1 Gear Box XYZ Slide System High Precision Linear Square Guide Way 25mm Elec
JKL Machinery. Inc. Manufacturing Demo Showroom& Office 7974 Lochlin Dr. Suite B4 Brighton. MI 48116. Phone: 248.437.4738 Fax: 248.437.4810 Parting out Busellato Jet 6000 XXL. Machine came out of service running. Please inquire about parts availability. Machine is complete with all components including transformer. Control panel and safety mats. Smaller parts are available immediately and can be shipped fed ex or ups. Larger parts will have a 5 day lead time and will require either local pickup or freight delivery. Please contact someone in our office or visit our website to make an inquiry. If you don't see what you need here please visit our website for other machine and machinery parts/service needs.
Machine was in use everyday. We took machine apart to ship to another plant. We purchased new thermwoods for the job this was intended for. This is a great machine. Ready to work. It includes a 16 Hp water cooled spindle. Feel free to call me with any questions. Multicam 5000 Year of MFG 2005. Bed Size 192 x 61 Mechanical T Slot hold down. 16 Hp Water cooled Spindle With Cooler. 12 Position Tool changer. 12 inches of z stroke. Serial Number 5-207-R-04399. Unit is crated and ready to Ship. Call 515 822-9812. Some tooling is included.
1.2KW D62mm 60000rpm CNC router Water cool spindle motor high precision Features: 1.high precision Carved machine dedicated 2.Spindle motor adopts imported ceramic ball bearings. 3. 4bearings.More bearings more suitable,more precision.and all bearings is High speed angular contact bearings! 4. Main use: advertising engraving machine. Woodworking engraving machine, CNC machine, small processing center, high speed centrifuge, and so on. Specification spindle motor Appearance size: 62* 202(inverter output voltage: 220 v voltage) Current: 4.5 A Speed: 0-60000 revolutions per minute Clamp cutter diameter: 3.175 ~ 6(mm) The default for the random distribution Cooling: cooling Power: 1.2 KW Four import P4 bearing. Ensure accuracy of spindle carving, more to ensure the service life of the spindle. Shipping to different countrues cost will different.So ... moreplease let me check the shipping fee for you. if you find our price is more epensive than others. Please remmber higher price means better quality. Shipment price issue and custom duty As the shipping fee to different countries will be big different. So we can recorrect the shipping fee as follows when we send you invoice after you bought. So you can read the follow before you make your offer. Thanks. If you come from: DHL shipping fee United states. Canada 68 USD Australia. New Zealand 89 USD Russia. Iceland… 95 USD Brazil. Argentina, Chile, Peru… 93 USD Germany. France, England, Italy, Belgium, Belgium, Denmark, Finland, Switzerland, Switzerland, Greece. Spain, Rumania. Poland, Czech. Ireland, Norway… 99 USD We can also offer EMS. And flat air mail. Please kindly leave your Tel number in order to make sure the items will get in your hands. Thanks for your cooperation. Service: 1 money refund accepted if the end mills are not as described 2 Wholesale accepted.The more the price is lower(we have factory) 3 Shipping time is about 13-25 busiess days by air.We also offer DHL or EMS.You can choose. Have any questions do not forget contact me. I w
2-axis CNC Router- Table capacity is 60 x 120" w/ 24K rpm spindle Alternative Views: Our Price: $6.000.00 Status: Used Good For more information: Call Brady McDonald at 860-484-4449. Or email bradym@globalmachinebrokers.com Item# 11335 This is a Brokered Item, Description Item Specs: has some Z-axis capability Table capacity is 60 x 120" 24K rpm spindle. Items operational. But will most likely be disassembled before sale
This EZ-router 5x10 has been a great machine in my small cabinet shop. I've used it to cut and machine 3/4" sheet goods for cabinet boxes. The Colombo RV110 toolchange spindle is in great condition. I just put new bearings in it and had the nose cone reground to spec. It was also balanced. There are 7 ISO30 toolholders with ER32 collets. The tool holders have seen little use. All were put into service in the last several months. The included computer has Mach3 control software from Ez-router(they will answer questions and supply parts if needed) There is a legitimate copy of BobCad V21 on the control computer for cad/cam work.newer versions are available) I run this machine at 900"min. rapids and cut 3/4" sheets at 525-550"min. It is stepper driven(Not expensive servos) The router is a 5x10 model but since adding the ... moretoolholders along the side it cuts the work envelop to about 50"x 123" The v-ways and rollers are in good condition as are the rack and pinions on the drive motors. Machine is available on or after 4-28-14. The vacuum pump for part holdown is a 18HP regenerative blower. It will develop between 10" and 13"Hg. on a 4x8 sheet. The router and spindle will run on single phase but the vacuum pump is three phase. I try to accurately describe the condition but is still I recommend you come watch this router run and inspect it yourself. I do have video of it doing a tool change that I can send you a link on if you like. Ships truck freight on a flatbed or you are welcome to pick it up.
Installation available in Wisconsin Busellato Jet 6000 XL CNC Router- As taken from service. Had regular maintenance and repairs. It was noted that with the rack and pinion and ball screw for the x, y it has some slight tolerance issues with the upper right outside and lower left outside corners for routing. This was inherent to this model apparently. Otherwise it was a good production machine. 2001 Model Year. Serial 5032 54" Y-axis. 212" X-axis, 15" Z-axis MP-19 Boring Head Horizontal Boring 14 HP spindle 8-position tool changer(8) Rails with 4 pods on each PC front end w/Genesis software Safety Mats As Taken From Service Stock Number: L-1-237 Machine can be loaded at no charge. Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and ... moreused machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS A
NO RESERVE Hi. thanks for stopping by! Please NO International Shipping or International bidding. You are buy ONE USED Buyer is responsible for all shipping charges from our SANDY. UT location. LOCAL PICKUP IS FREE. Please look at pictured before bidding. Utah Buyer pay sale taxes 6.85% Shipping included tracking number and insured mail. Paypal only please. Please take a look at the actual picture. This item is being sold AS-IS. There are no guarantees or warranties; it cannot be returned for any reason. We are not liable for incidental or consequential damages or claims. Payment Options: PayPal(confirmed. Physical, US address) This Listing Is AS IS and Will Be Final Sale NO RETURN is accepted. So please bid accordingly See My other items Good luck. And happy bidding!
ISEL AC SPINDLE MOTOR THIS BID IS FOR A USED ISEL SPINDLE MOTOR WITH CABLE AND MOUNTING PLATE. I PUT A PHOTO OF THE CNC ROUTER THAT IT CAME OFF OF. YOU CAN SEE THE HISTORY OF IT. I HAVE NOT SEEN IT RUN BUT I WAS TOLD IT WORKS. THE SHAFT IS TIGHT AND SPINS NICE WITH NO NOISE. THANKS FOR LOOKING
ELTE STK-6.5/2 SPINDLE MOTOR 400V 11A 0.35KW 200HZ FOR CNC MILL ROUTER EXCELLENT CONDITION REPRESENTATIVE PHOTO FDG2D1B JMB WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared. The listed shipping and handling charges are for the continental US and include all Packaging. Handling, and Insurance fees/costs for regular orders. If equipment is needed to be shipped the same day. Evenings, weekends, or holidays, an additional fee will be added and we must be contacted by phone or email/message. We recommend you contact us directly for all international or freight shipments. Feel free to contact us if you are purchasing multiple items to see if your purchase ... morequalifies for shipping discounts. PAYMENT Payment can be made with PayPal. Credit Card, Cashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any re-manufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 15:11:19 PDT. Seller added the following information:
TERMS AND CONDITIONS; All products are SOLD AS IS and UNABLE TO TEST unless otherwise noted in the description. Please read complete description and look closely at photos. Please ask all questions. Or request additional information prior to bidding on items. All sales are final, and all products are sold without warranties or guarantee, and no returns are accepted. Shipping Insurance included in Shipping and Handling. All items will be shipped no later than the next business day after CLEARED payment is received by 4pm EST, Monday through Friday. You are bidding on a USED Perske KCS 71.20-2 D DUAL VOLTAGE CNC ROUTER SPINDLE MOTOR KCS71202D. CAN RUN AT 230-400 V. 4.5-7.5 KW, 2900-8900 RPM. MOTORS WERE PART OF A WOODWORKING MANUFACTURING SPARE PARTS CRIB. SPIN FREELY. SEE PHOTOS FOR ALL MOTOR SPECS AND CONDITION) DJ BR Please Visit Our Ebay ... moreStore For More Items!
ALL ITEMS START AT $3.99. CHECK OUT OUR OTHER AUCTIONS Inventory Number: 03140290012 Manufacturer: Description: BIESSE CONO-ISO-30 CNC ROUTER/SPINDLE MOTOR? ISO-30 TAPER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, REMOVED FROM A MACHINE BEIUNG SCRAPPED Photos For This Item BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically ... morecharge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice& prepaid with paypal. Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of t
Steel cutter head. See photo for details. Could be bored and or bushed to use with other spindle sizes. Will combine shipping. Wait for invoice with corrected shipping cost on multiple item purchases. All measurements are approximate except for bore size.
Listing is 7.5HP Colombo Spindle. RV.90.2. It is a colleted spindle. Not pneumatic chuck. Was purchased with a CNC router. But will only run 480VAC, which my shop does not have. Spins freely by hand. But I could not hook it up to power for testing.
0.8KW D65mm 110v CNC router Water cool spindle motor high precision Features: 1.high precision 2.Spindle motor adopts imported ceramic ball bearings. 3. 3bearings.And all bearings is High speed angular contact bearings! 4. Main use: advertising engraving machine. Woodworking engraving machine, CNC machine, small processing center, high speed centrifuge, and so on. Specification spindle motor Is 304 stainless steel material: coat. Jacket for high die casting aluminum pipe, copper coil! Voltage current: AC220v ordinary household electric can(must be through the inverter output. Cannot be used directly in ordinary family Electricity) Highest speed: 24000 r/min Maximum working frequency: 400 hz Radial runout quantity: 0.01 mm(10 microns within 1 silk) With the shaft: 0.025 mm(2.5 microns) Installation dimensions: short: 65 mm* 158 mm Clamping ... morediameter: ER11 chuck. Standard 6 mm Nut type: ER11- type A Speed adjustment way: by frequency converter to adjust the output voltage and working frequency. And can realize infinitely adjustable-speed. 0-24000 Cooling: cooling water circulation Power interface: choose GX16 waterproof air interface. There were 1234, 123 respectively by the inverter power supply(U, V, W) 4 inverter earthed Lubrication: high temperature grease lubrication Shipping to different countrues cost will different.So please let me check the shipping fee for you. if you find our price is more epensive than others. Please remmber higher price means better quality. Shipment price issue and custom duty As the shipping fee to different countries will be big different. So we can recorrect the shipping fee as follows when we send you invoice after you bought. So you can read the follow before you make your offer. Thanks. If you come from: DHL shipping fee United states. Canada 58 USD Australia. New Zealand 79 USD Russia. Iceland… 85 USD Brazil. Argentina, Chile, Peru… 83 USD Germany. France, England, Italy, Belgium, Belgium, Denmark, Finland, Switzerland, Switzerland, Greece. Spain, Rumania
1.2KW D62mm 24000rpm CNC router Water cool spindle motor high precision Features: 1.high precision Carved machine dedicated 2.Spindle motor adopts imported ceramic ball bearings. 3. 4bearings.More bearings more suitable,more precision.and all bearings is High speed angular contact bearings! 4. Main use: advertising engraving machine. Woodworking engraving machine, CNC machine, small processing center, high speed centrifuge, and so on. Specification spindle motor Appearance size: 62* 202(inverter output voltage: 220 v voltage) Current: 4.5 A Speed: 0-24000 revolutions per minute Clamp cutter diameter: 3.175 ~ 6(mm) The default for the random distribution Cooling: cooling Power: 1.2 KW Four import P4 bearing. Ensure accuracy of spindle carving, more to ensure the service life of the spindle. Shipping to different countrues cost will different.So ... moreplease let me check the shipping fee for you. if you find our price is more epensive than others. Please remmber higher price means better quality. Shipment price issue and custom duty As the shipping fee to different countries will be big different. So we can recorrect the shipping fee as follows when we send you invoice after you bought. So you can read the follow before you make your offer. Thanks. If you come from: DHL shipping fee United states. Canada 68 USD Australia. New Zealand 89 USD Russia. Iceland… 95 USD Brazil. Argentina, Chile, Peru… 87 USD Germany. France, England, Italy, Belgium, Belgium, Denmark, Finland, Switzerland, Switzerland, Greece. Spain, Rumania. Poland, Czech. Ireland, Norway… 63 USD We can also offer EMS. And flat air mail. Please kindly leave your Tel number in order to make sure the items will get in your hands. Thanks for your cooperation. Service: 1 money refund accepted if the end mills are not as described 2 Wholesale accepted.The more the price is lower(we have factory) 3 Shipping time is about 13-25 busiess days by air.We also offer DHL or EMS.You can choose. Have any questions do not forget contact me. I w
G. COLOMBO RC73.22 CNC ROUTER SPINDLE 2.6A 1.3HP EXCELLENT CONDITION PHOTO IS ACTUAL ITEM. J13B2B. WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared. The listed shipping and handling charges are for the continental US and include all Packaging. Handling, and Insurance fees/costs for regular orders. If equipment is needed to be shipped the same day. Evenings, weekends, or holidays, an additional fee will be added and we must be contacted by phone or email/message. We recommend you contact us directly for all international or freight shipments. Feel free to contact us if you are purchasing multiple items to see if your purchase qualifies for shipping ... morediscounts. PAYMENT Payment can be made with Paypal. Credit Card, Cashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any remanufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 17:44:13 PDT. Seller added the following information:
Used Multicam 1000 Series CNC Router. New in 2005. 50" x 100" Work Area. Perske 4HP Spindle. 10 HP Vacuum Pump. Buyer responsible for rigging and shipping. Sold as is. No warranties.
4' x 8' CNC router table. Precix 9100 series, retrofitted by CNC doctor 2 years ago. PC running Mach 3 with USB ports to transfer files.Machine features:Servo motors, Auto Z tool, NOS X- Axis servo motor, New Z-Axis encoder from quantum, 3.3HP Perske spindle, T-slots with hold down clamps, 4 zone vacuum hold down. Buyer will need software to create G-code such as Enroute, Used to cut various materials including aluminum, wood, plastic foam for sign shop. Selling because we are upgrading to a 5' x 10' table. Must sell to make room for new table. Buyer to make arrangements to transport table approx weight 1200lbs. No warranty sold as is. Will post video link of machine running once uploaded.