In 
 
Order by: 
Available to: 
Price: 
 - 
$
39
Buy It Now
$0 Shipping
Condition: New
Location: New Milford,CT,USA
$
3,000
Buy It Now
$0 Shipping
Condition: Used
Location: McCleary,WA,USA
$
39
Buy It Now
$0 Shipping
Condition: New
Location: New Milford,CT,USA
$
4,000
Buy It Now
Free Shipping
Condition: Used
Location: Walla Walla,WA,USA
$
12.99
Buy It Now
$1.99 Shipping
Condition: New
Location: Tracy,CA,USA
$
11,999
Buy It Now
$0 Shipping
Condition: New
Location: Macon,GA,USA
$
11,999
Buy It Now
$0 Shipping
Condition: New
Location: Bonita Springs,FL,USA
This is the Brand New in the Box Panel Boring Pocket Hole Machine ITEM# DK5100(Please allow up to 2 weeks for delivery of this machine) 5 drill spindle ... moreconfiguration. Synchronized stroke Individually actuated motors Entirely pneumatic design Hardened steel drill guides to maximize drill bit life One-touch. Foot pedal operation Swing stops for optimized material positioning Dust collection chutes for efficient chip removal Pre-filter and automatic lubricator Individual Control Each of the five spindles is controlled with an on/off switch located on each clamping tower. Giving you instant control of every spindle. Drill with all five spindles at once or turn a couple off to best meet the needs of your project. 5 Pocket-Holes. 1 Machine Cycle The DK5100’s five spindles are spaced 6” on-center. The perfect spacing for many panel applications. A simple tap of the foot pedal will create five uniform Pocket-Holes in less than 2 seconds. Nowthat’s productivity. Pneumatic Power All five drill spindles are driven by industrial grade pneumatic motors that are designed to provide you with plenty of drilling power. Panel after panel, year after year. Motor: Pneumatic. Five(5) 3/4 hp motors Drill Bits: DKDB Drill Bit(3/8” Shank Dia. 3/16” Pilot. 1/2” long) CFM Rating: 20 cfm at 50% Duty Cycle(120 psi) Cycle Time: 2 seconds Material Clamping Capacity: 1-3/4” Hole Centering Capability: 1/2” material to 3/4” material Weight: 350 lbs. Dimensions: 50” H x 36” W x 24” D(40” Table Height) On-Center Spindle-Spacings: 6” Warranty: 5 Year Limited Warranty Shipping Policies: This item is only available to the 48 Continental US States at the shipping price shown We do not ship to Alaska. Hawaii Canada, PR, APO, FPO or International addresses This items ships on a 48ft+ Freight Truck ground to a commercial business address(Our carriers only) for the shipping price shown. Shipping price listed is to the tail of the truck and you would be responsible to unload for the tail. If shipping to a residential address there will be a $75.00 c
$
25.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
12,500
Buy It Now
$0 Shipping
Condition: Used
Location: Casa Grande,AZ,USA
$
274.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
25.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
14.5
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
$
14.5
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
$
12.5
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
$
12.5
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
$
65
Buy It Now
Free Shipping
Condition: New
Location: Miami,FL,USA
$
274.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
123.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
16
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
16
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
16
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
14
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
1,645.31
Buy It Now
$592.31 Shipping
Condition: Used
Location: United Kingdom
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
123.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
15.78
Buy It Now
$9.86 Shipping
Condition: New
Location: United Kingdom
$
311.55
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
24
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
1,279.66
Buy It Now
$85.34 Shipping
Condition: New
Location: France
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
12
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
26.31
Buy It Now
$9.86 Shipping
Condition: New
Location: United Kingdom
$
29.95
Buy It Now
$0 Shipping
Condition: New
Location: Santa Ana,CA,USA
$
10
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
16
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
18
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
24
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
6
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
8
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
16
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
8
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
16
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
8
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
18
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
12
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
22
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
40
Buy It Now
Free Shipping
Condition: Used
Location: DeKalb,IL,USA
This listing is for an LRH Partial Double Raised Panel Cutter K1090B 4" OD 1 1/4" Bore internal reference A Feel free to contact us by phone ... moreor email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact our offices
$
22.48
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Delta,OH,USA
$
20
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
16
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
17.5
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
15
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
$
24
Buy It Now
$0 Shipping
Condition: Used
Location: Eugene,OR,USA
1 2 3
 In 

Past Items  
 
this is a used Kwik Way LBM portable line boring machine in good condition we used it to bore the cam bearing on cummins engines only so most of the tooling has never been used. comes with alot of blanks that can be ground to any bore size. this is a military modle and the setting mic reads in MM. If you want it shipped this will have to be shipped by truck line. buyer must set up shipping. On Mar-04-13 at 17:10:49 PST. Seller added the following information: QUESTIONS CALL 435-896-4876 a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13e03fd58e1-0xf3-
Ritter 23 Spindle Line Boring Mac hine. One owner bought in J an of 2000. Call with any questions 317-529-5094. Call for a shipping quote. STANDARD FEATURES: R19F• 23-Spindle Gear Driven Drill Row• 10mm Bored Collets. 12 R/H and 11 L/H• Index Pins• 0"3" Pneumatic Drill Head Stroke• 0"12" Adjustable Backfence Offset• Accepts 57mm or 70mm Tool Lengths• 14" x 48" Table Area• Wired 3-Phase. 230/460 Volts, 60 Hz. Foot Pedal Actuated Stroke• 32mm Spindle Centers• 3 H.P. Spindle Drive Motor. T.E.F.C. Spring Operated Hold Downs• 60" Backfence With 4 Adjustable Stops• 4) Backfence Offset Stops• 1/4" Filter. Regulator and Lubricator• Magnetic Motor Control• Machine Weight: 760 lbs. Floor Area: 60" W x 36" D ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13e04843363-0xfa-
please note item is also listed locally. if item is sold here we reseve the right to cancel the auction at any time/ Price reduced/ System Drill/ LB-23/ single row boring machine. 23 drills. unit works tested and varified is in good working order. shows very little use. Problems I see: missing The Side Stop. But I assume it is easy to make something so it will act as a end stopper. Motor is a single phase, setup for 110V, it can be rewired for 220V. We can convert to single phase 220V before shipping, if requested, $35. Please let me know if you have any question and or concern. buyer arranges and pays for delivery, we can left and load, no charge. unit needs to go on a Pallet, palletize and tie down $50.00. if unit needs to be crated for shipping $250. it weighs about 300 pounds. It can be tested at our location in Fremont CA, we can delivery ... morein the area, $75.00 any question please contact me. Please note: I will be raising the price of this unit if there is no bit starting on the third day and I will keep raising. every time it is Relist it will be listed at a bit higher price. so the price you see now is the lowest price it will be for the foreseeable future. thank you for your understanding.
Ayen LBM 32/23 SE Line Boring Machine Mfg. date 1988 Ayen LBM 32/23 SE Line Boring Machine Mfg. date 1988. This machine came from a bancruptcy auction of a furniture manufacturing company. It is currently set up to run on 230V 3 phase power. The manufacture date is 1988. Everything that is included is shown in the pictures. Disclaimer The item offered here is in no way recommended or certified for any specific use. By purchasing this item you agree that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with this item. By purchasing or bidding on this equipment you are indicating your acknowledgement of and agreement to the terms of this disclaimer. We strive for 5-star service by stating upfront our policies. Shipping rates and shipping frequency. We ... morestrive to earn 100 percent'5 Star' scores from you. The star-scores are very important to us, because eBay uses them to determine our fees and our visibility in the eBay search results. Our future success depends on it! Thank you!
Up for Sale! SCMI MB 29 SPINDLE LINE HORIZONTAL/ VERTICAL BORING MACHINE Technical Specifications: 3HP. 230V, 3Ph 2.800 RPM Motor 6 Position Turret Depth Stop 2-3/4" Max Boring Depth 41" Throat Capacity 44" x 22" Table Size Overall Dimensions: 72" x 60" x 48" Net Weight: 1.100lbs We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. SE HABLA ESPAÑOL. OCMACHINERY AT GMAIL COM 714 658 5390 We can help with freight and local delivery. FREE LOADING IN ALL PURCHASES
Ritter R-19F 23 spindle line boring machine. Is in complete working condition from my shop. 2nd owner non commercial use so its in great shape, has some new bits included and is complete with all electricals and air fittings, simply add power and air and start boring. currently wired for 220v 3ph, only selling because i got the 2 head r-46 now and dont need both. email any questions. i can get you an affordable freight quote depending on where you are. palletizing,shrink wrapping and loading is free/crating is an extra $100. machine is sold as used, working, as-is, no returns. ill accept $500 by paypal and the rest as a cashiers check only at pickup.
This listing is for a used but in good working condition SCMI MB-51 Horizontal& Vertical Wood Boring Machine Made in Italy 220 Volt 2 HP Machines Weight is 1190 pounds Contact me if you would like a freight quote or item can be picked up in Clovis. California
This Conquest B0111 Mini 13-Spindle Line Boring Machine Is In Very Good Working Condition(see actual photos) Space Saving. Simple To Operate. 2 Spring Loaded Index Pins. 2 Heavy Duty Cast Flip Stops. Heat Treated Steel Helical Gears(not plastic! 8" Throat Opening(capacity to drill from edge of board) TEFC BALDOR Motor. Dust Protected& 3,450 rpm For Quick, Easy& Clean" Drilling Built in the USA! 13-Spindle Boring Head. Solid Heat Treated Gears. Not nylon as is competition. 8-Inch Throat Opening capacity to drill to board edge. Heavy Duty Flip Stops& Overall Construction. Includes everything shown in my photos. THIS IS A SOUTH FLORIDA ONLY PICK-UP. I AM LOCATED IN OAKLAND PARK. FLORIDA, ZIP CODE 33306. I AM RIGHT NEXT TO FORT LAUDERDALE FLORIDA. Please click to see my other auctions and Additional Items in my eBay Store. ... moreCHECK OUT MY FEEDBACK AND BID WITH CONFIDENCE! Feel free To Call Me Toll Free USA Only at 1-888-802-8600 or all others at 954-565-2364. WE OFFER FULL MONEY BACK REFUNDS FOR ITEMS THAT ARE NOT AS DESCRIBED. RETURNS FOR OTHER REASONS ARE CONSIDERED ON A CASE BY CASE BASIS.
This is a 2002 model Blum minipress in working condition. 220v. 3 phase, Model AB 00483 These presses retailed for over $3.000 new. This machine takes the routine jobs in the workshop producing precise assembly results for cabinets, doors, drawer fronts and lift systems. Once set, the desired boring pattern can be quickly made or the desired hardware quickly inserted. You can search YouTube to see a video of this machine running. Search the keywords"Blum Minipress Springfield MO" is flexible enough to be used in the workshop as well as on-site jobs! This manually operated machine runs on Adjustable fencing system and stroke control. Pneumatic hold-down clamps and dust evacuation jet. Very simple and efficient machine designed to bore all hinge and mounting plate systems. METABOX and TANDEMBOX front fixing brackets. METABOX C-15 ... moredrawer components and 3-Hole line boring of cabinet sides. Technical Specs: 220V. 60Hz, 3Ph, 1.1HP(0.75Kw) Spindle Speed: 2.450RPM Shipping Dimensions: 32" X 32" X 24" Est. Weight: 85 lbs. The machine was plugged in and tested to be sure it turned on and performed basic functions. There appears to be no problems with this machine. Posted with
Up for sale is one Climax Key mill portable milling machine M-65 Used in good working order Comes with some accessories From bankrupted business Any questions are welcome Powered by The free listing tool. List your items fast and easy and manage your active items.
Climax BB 4000 1-3/4 Boring Bar system This is a complete boring bar system in very nice shape and ready to make you money. Comes with all the setup equipment Cones mounting brackets bolts. will take it out of the case and get better pictures tomorrow. Thank you for your Business! Shipping will be 300! God Bless! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f43aee387-0xff-
Gold International Machinery Corporation | Ritter R-46. 46-Spindle 2-Head Line Boring Machine Our Inventory Number: 0164-410 Technical Specifications: Ritter R-46, 46-spindle 2-head line boring machine, SN 1736, year 1998, two 3HP, 3-phase 208-230/460 volt motor, push button magnetic controls, connected for 230 volts, heads can be moved 26" center to center maximum, two spring-loaded hold-downs, two 23-spindle heads, 10mm straight bore chucks with set screw retention, back fence with two pneumatic referencing pins, foot pedal control, cleaned and checked, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family ... moreowned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phon
UP FOR BID IS A GANNOMAT DOUBLE HEADED LINE BORING MACHINE. 25 YEARS OLD. NEEDS SOME WORK. ITEM IS FOR LOCAL PICK-UP ONLY. LOCATED IN MANASQUAN, NJ. NEEDS TO BE PAID FOR AND PICKED UP BY JUNE 30. CHECK OUT MY OTHER AUCTIONS FOR ADDITIONAL EQUIPMENT!
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES ALL CRATING& FREIGHT CHARGES ARE BILLED SEPARATELY FROM THE PURCHASE PRICE OF THE ITEM RITTER R246 Dual Head 23-Spindle Line Borer Features: The Ritter R246 Line Boring Machine features dual 23-Spindle heads which drills from the bottom. This machine has 32mm spindle centers with a 4" to 22" distance between rows. Both heads are fully adjustable on a Rack& Pinion. Made on a 8" X 49" machined steel worktable surface which moves along on a precision table rail guide system. Dual 3HP/1.725RPM motors drive the spindles by steel helical gears. Comes equipped with 2 air index pins for continuous line drilling, 2 adjustable position material stops per extension, and 4 adjustable position front head pneumatic hold-downs. Capable of ... moresingle or double row cycle drill head stroke control. Foot Pedal operated(90 PSI required) Technical Specifications: 230V. 3Ph, 60Hz Main Motors: 2) 3HP@ 1.725RPM Worktable Dimensions: 8" X 49" Drillbit Requirements: 24) RH& 22) LH Bits w/10mm Shaft& 55mm OPL Overall Dimensions: 72" X 60" X 52" Net Weight: 3.050lbs*Specifications listed are to the best of our knowledge* Verification available upon request* Apx. Replacement Cost: $15.000 Condition: 5) Used/ Untested* Machine came out of Production* Our ratings are as follows: 1) New Surplus: Equipment or parts are new. 2)Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. PLEASE VISIT OUR EBAY STORE FOR MORE GREAT PRODUCTS! Payment: Please do not submit payment until you receive a final invoice with all app
in good working conditions!COMES WITH A NICE AND ADJUSTABLE VICE! I will take decent offers! Posted with
Ritter R-123 23 Spindle Line Borer General Info: Stock# 64333 Condition: Used. Good working condition Tested: Yes Brand: Ritter Model: R-123 Serial: 280 Year: 1994 Shipping Weight: 430 lbs Shipping Dimensions: 64" L x 40" W x 84" H Specifications: Ritter Model R-123 Line Borer. 23 Spindles(12 Right, 11 Left) 32 mm Spindle centers, 3HP, 230/460V, 3Ph, 2" drill stroke, hardened steel gears Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 We are not trained mechanics or specialists of the following machinery listed and therefore can't guarantee full functionality or specs of the machine. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this ... morepiece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
Conquest 2 Row Line Boring Machine(23 Spindle) Model# 2-46 Manufactured in the USA Ideal for high production Dual Independent 23 spindle Heads powered by individual BALDOR motors 132" Fence with 4 Flip stops 5-1/2" to 27" distance between drill heads Head movement by digital measure Powder coated fabricated surfaces Thru-drilling brake optional FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528
Climax BB 4500 1-3/4 Boring Bar system This is a complete boring bar system in very nice shape and ready to make you money. Comes with all the setup equipment Cones mounting brackets bolts. there is a 4 foot boring bar and a 12 foot boring bar. Very nice shape as you can see. Thank you for your Business! Shipping will be 350! God Bless!
Conquest 13 spindle line bore machine with stand. It is about 3 years old and was used exclusively in a one man cabinet shop. This comes with the stand as well as 2 spare bits. 110V Works perfectly and in excellent condition. Must be picked up. Not willing to ship.
WE WILL DEFINITELY SELL INTERNATIONALLY BUT YOU MUST CONTACT ME DIRECT FIRST THROUGH THE MESSAGING OPTION TO ARRANGE TO DO SO! OVERSEAS SALES ARE WELCOME BUT YOU HAVE TO DEAL WITH DROP OFF TO CONTAINER SHIPPER'S AND LOADING AT DOCK SIDE. I CAN ONLY LOAD OUT OF THE WAREHOUSE. IF YOU ARE LOCAL WE CAN PROVIDE LABOR FOR BOTH LOADING AND UNLOADING(DELIVERY WILL BE A FEE) SHIPPING IS NOT"$1.00" EBAY IS NOT SET UP FOR FREIGHT SHIPPING IN THE SELECTION. WEIGHT IS LISTED BELOW AND NOT 1 POUND. IT WILL DEPEND ENTIRELY ON THE BUYERS CHOICE OF OPTIONS. PLEASE SEE THE NOTE IN THE SHIPPING BOX. THANKS! NO CREDIT CARD PAYMENTS ACCEPTED ON THIS ITEM DUE TO THE AMOUNT AND THE COMMON USE OF CHARGE BACKS TO GAIN POSSESSION OF MATERIALS WITHOUT PAYING FOR THEM. THIS HAS HAPPENED MANY TIMES TO ME ON EBAY AS THERE IS NO SELLER PROTECTION DESPITE ... morePROPAGANDA TO THE CONTRARY. I WILL ASK FOR A COPY OF THE PAYPAL PAYMENT PAGE TO VERIFY NON CREDIT CARD PAYMENT OR WE CAN ARRANGE DIRECT PAYMENT. SPEFICIATIONS/DATA RITTER#R-26 DOUBLE ROW LINE BORING MACHINE(SEE PHOTOS! USED RITTER MODEL#R-26 DOUBLE ROW LINE BORING MACHINE. 2) ROW OF 13 EACH, DRILL SPINDLES ARE ON 2" CENTERS, FOOT PEDAL ACTUATION OF DRILL HEADS, 230 VOLT, 3-PHASE, NEEDS 1/4" BITS AND, HAS PARTS MANUALS(SOMEWHERE) GOOD OPERATIONAL CONDITION FOR DRILLING CABINET SHELVES AND OTHER MULTIPLE IN LINE HIGHLY PRECISE DRILL LINE HOLES. OVER 10 GRAND NEW. USED USUALLY GOES FOR 3 GRAND OR MORE. NEEDS DRILL BITS. NICE CONDITION, PAID $3000.00 SELLING FOR $1500.00 OBO Cosmetics/Operation This is a great machine. RITTER is the premier name in woodworking products. It has sturdy cast iron construction with heavy gauge rolled steel. Very little flimsy sheet metal here. It reportedly worked fine BUT YOU WILL NEED TO BUY NEW DRILL BITS FOR THE UNIT. I was not able to fire it up lacking power at the storage site. It has been dry stored all of its life. I have oiled the bed. Kept it covered and stored inside for the last couple years since purchase. You would never need to
SHIPPING IS NOT"$1.00" EBAY IS NOT SET UP FOR FREIGHT SHIPPING IN THE SELECTION. WEIGHT IS LISTED BELOW AND NOT 1 POUND. IT WILL DEPEND ENTIRELY ON THE BUYERS CHOICE OF OPTIONS. PLEASE SEE THE NOTE IN THE SHIPPING BOX. THANKS! WE WILL DEFINITELY SELL INTERNATIONALLY BUT YOU MUST CONTACT ME DIRECT FIRST THROUGH THE MESSAGING OPTION TO ARRANGE TO DO SO! OVERSEAS SALES ARE WELCOME BUT YOU HAVE TO DEAL WITH DROP OFF TO CONTAINER SHIPPER'S AND LOADING AT DOCK SIDE. I CAN ONLY LOAD OUT OF THE WAREHOUSE. IF YOU ARE LOCAL WE CAN PROVIDE LABOR FOR BOTH LOADING AND UNLOADING(DELIVERY WILL BE A FEE) NO CREDIT CARD PAYMENTS ACCEPTED ON THIS ITEM DUE TO THE AMOUNT AND THE COMMON USE OF CHARGE BACKS TO GAIN POSSESSION OF MATERIALS WITHOUT PAYING FOR THEM. THIS HAS HAPPENED MANY TIMES TO ME ON EBAY AS THERE IS NO SELLER PROTECTION DESPITE ... morePROPAGANDA TO THE CONTRARY. I WILL ASK FOR A COPY OF THE PAYPAL PAYMENT PAGE TO VERIFY NON CREDIT CARD PAYMENT OR WE CAN ARRANGE DIRECT PAYMENT. SPEFICIATIONS/DATA SCMI IS A WORLD RENOWNED ITALIAN WOOD WORKING MACHINE MANUFACTURER. THERE ARE SERVICE OUTLETS THROUGH OUT THE USA. SCMI IS CONSIDERED ONE OF THE BEST BUILDERS OF WOOD WORKING MACHINES AND HIGHLY DESIRABLE. THIS SCMI LINER BORING MACHINE HAS#36 HEADS THAT ARE PNEUMATICALLY ACCUATED AND MOUNTED. THEY ARE IN A SINGLE ROW BUT THE HEADS CAN BE ROTATED 90 DEGREES TO DRILL BOTH VERTICAL HOLES FOR SIDES OR FOR DOWELING. AND HORIZONTALLY FOR SHELF HOLE DRILLING. THIS MAKES CHINA CABINET AND CLOSET SIDES EASY TO MAKE WITH ONE SINGEL DRILL ACTION. THERE ARE 4 PENUMATIC HOLD DOWN OVER HEAD CYLINDERS(SEE PHOTOS! FOOT PEDAL ACTUATION OF DRILL HEADS, 230 VOLT, 60 HZ, GOOD OPERATIONAL CONDITION FOR DRILLING MULTIPLE IN LINE HIGHLY PRECISE DRILL LINE HOLES. OVER 10 GRAND NEW. USED USUALLY GOES FOR 3 GRAND OR MORE. YOU WILL NEED TO BUY NEW DRILL PNEUMATIC CHUCK COLLETS AND BITS FOR THE UNIT. NICE CONDITION, PAID $3000.00 SELLING FOR $1500.00 OBO THE USA EQUIVILANT MACHINE WOULD BE THE RITTER 46 VH MODEL. Cosmetics/Operation It has sturd
You are bidding on a rarely used- LIKE NEW original DELTA 32-325. 13 spindle line boring machine. Includes 13 bits(a $260 value) Manual and parts. This machine features 3/4HP. 1725 rpm, single phase motor, Left and right indexing pins, Left and right work stops, 13-spindle boring head, See through spindle guard, Telescoping handle, Table, Adjustable depth stop, Steel support structure and base, Wrench and literature holder and instruction manual. Instruction manual Large. 16" X 29 3/4" table provides a full 12" of work space in front of the boring head for boring extra-large boards Fully-adjustable table and fence assembly features easy-to- read English and Metric scales for quick set-up and accurate boring. Indexing pins help operator to maintain correct spindle alignment for resuming line boring operations in long workpieces ... moreWork stops on either end of the fence allow operator to line up work from the left or right for performing parallel boring patterns. Adjustable depth stop controls the downward travel of boring head. Heavy-gage. Sheet steel support structure has a sturdy steel base with holes for bench or stand mounting Powerful 3/4 HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates. Large-capacity. 13-spindle boring head comes with a see- through spindle guard for safety Telescoping handle. Featured on No.32-325, extends from 16" to 23" for increased leverage when needed; retracts when not in use. This machine was used about 2 years ago for a one-time job and is now available for sale in its original packages. Due to its heavy weight(over 100lbs) I can only list as local pickup. Buyer can arrange freight i'll assist.
JUST REDUCED! Ayen Line Boring Machine(Spindle) Model# LBM21 FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528
Climax KM 87 Keymill if you are looking for the smaller keymilling machine well this be the one. They do not make this unit anymore it was not profitable for them. This unit is in nice shape runs and sounds great. It does have a 1/2 inch cutter in it however that is all. We will ship it for 45.00! Thank you for your Business~! God Bless!
2005 CONQUEST LINE BORING MACHINE(2) ROWS OF 23 SPINDLES DRILLS FROM BOTTOM-UP(2) 2 HP BALDOR MOTORS(2) PNEUMATIC HOLDDOWNS 120" BACK FENCE WITH(3) FLIP STOPS(2) INDEX PINS FOR SEQUENCE BORING LING SIDE PANELS FOOT PEDEL FOR CLAMPING& BORING CYCLE HAS BEEN CHECKED AND IN VERY GOOD WORKING CONDITION CALL 832-684-7290
Ritter R-113 Line Boring Machine General Info: Stock# GS-713-1019 Condition: Good Tested: Yes. Good Working condition Brand: Ritter Model: R-113 Serial: 2104 Year: 1997 Weight: 275 Specifications: Ritter R-113 Line Boring Machine. 13 32mm Spindle Line, 75HP motor/ 115V/ 1Ph, 24" x 48" Front table with 60" back fence, 0" x 8" Throat Capacity. Cord& Plug Additional Info: Machine includes custom table. Includes manual. Seller Contact Information: Gregory Slugocki 305-331-8416 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
ebay template Header. DELTA 32-325 3/4HP 13-Spindle Line Boring Machine. Stand Not Included $2,372.00, Item Report, Product Condition, Product Features, Product Details, Product Condition: Item Appearance, Like New(Item looks almost new but has been used) Item Functionality, Powers On(Item has been powered on but no other functions have been tested) Packaging, Not original packaging, Item Includes, Undetermined. This item has not been verified to be complete and maybe missing pieces, Product Notes: ITEM HAS SCRATCHES. SCUFFS, AND DENTS, AS SHOWN! ITEM POWERS ON BUT NO OTHER FUNCTION HAS BEEN TESTED! LOOSE HARDWARE! Product Features: Large. 16-inch by 29 3/4-inch table provides a full 12-inch of work space in front of the boring head for boring extra-large boards Fully-adjustable table and fence assembly features easy-to-read English and metric ... morescales for quick set-up and accurate boring Indexing pins help operator to maintain correct spindle alignment for resuming line-boring operations in long work pieces Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel boring patterns Adjustable depth stop controls the downward travel of boring head Heavy-gauge. Sheet steel support structure has a sturdy steel base with holes for bench or stand mounting Product Details Inventory Number: B00002237W Manufacturer Number: 32-325 MSRP: $2372.00. UPC: About Us, Payment, Shipping, Pick Up, Returns, Contact Us, About us: Thank you for your interest in TaddWholesale on eBay! We are dedicated to bringing an endless variety of products to eBay and allowing our customers to determine the price. For over a decade we have been starting all of our listings as a no reserve auction with a.99 cent starting bid. One of the biggest compliments we can receive is a repeat customer and we have been fortunate enough to have had hundreds of thousands of repeat customers over the years. Our team has successfully completed well over 1 million individual eBay listings in our care
I purchased this with a Blum JuniorPress(will be listing later) and there is no markings or Model# s so if someone knows please let me know. I was thinking maybe Grass because its green. I also have 1 of those to list, but am not sure. All spindles turn free and no apparent damage. Also might be for a drill press head attachment Let me know if more pics needed or interest in other presses.
This is a pneumatic 21 bit line boring machine. It operates off of a foot pedal. It is in perfect working order and has all the bits. They are a hundred dollars by themselves. It is very dusty because I really haven't used it that much. I bought it new. It is a great piece of equipment. My shop is going out of business so have to sell. Lots of other equipment needs to go as well.
STAIGHTLINE DL 605 DIRECTIONAL BORING RIG LOW COST SHIPPING IS AVAILABLE SEND YOUR ZIP CODE FOR A QUOTE COMPLETE WORKING UNIT VERY LOW HOURS-396 AT TIME OF LIST LISTING POWERED BY KUBOTA 4 CYLINDER ENGINE QUICK CONNECT HYDRUALIC HOSES DRILL MACHINE IS EQUIPPED WITH STRIKE ALERT SYSTEM 220 FEET OF DRILL STEM BITS PLUGS AND PULLS HYDRAULIC MUD TRI PLEX PUMP AND WARM TANK TRAILER HAS NEW TIRES AND A PINTEL HITCH WITH 7 PIN TRAILER PLUG CAN DELIVER ANYWHERE IN THE LOWER 48 STATES CALL 419 377 7338 FOR MORE INFORMATION OR TO INSPECT ALL OUR USED ITEMS ARE BEING SOLD AS IS WITH NO WARRANTY EXPRESSED OR IMPLIED IN ANY WAY OUR CONTACT INFORMATION IS LISTED IN THE AD-PLEASE CALL WITH ANY QUESTIONS. THIS ITEM IS BEING SOLD AS IS SEEN WITHOUT RECOURSE. BALANCE DUE WITHIN 3 BUSINESS DAYS.SELLER RESERVES THE RIGHT TO END AUCTION EARLY NO REPRESENTATION. ... morePROMISE OR WARRANTY EXPRESSED OR IMPLIED HAS BEEN MADE REGARDING EQUIPMENT CONDITION, MERCHANTABILITY, SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE. On Oct-03-13 at 19:18:30 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
This Marcon line boring machine is in excellent condition. It has 46 spindles. And includes 23 left and 23 right 5mm boring bits. This alone is worth over $500.00. Shipping is the responsibility of the buyer. We will palletize and prepare for shipping(shrink wrap) for $50.00. If buyer wants machine crated. We can crate for approximately $150.00. Weight of the machine is approximately 400 lbs.
It's in great working order. We're replacing it due to investing in new equipment but it's still being used on a daily basis. It comes complete with all tooling& boring equipment available to be able to use it within the range of 40mm-150mm. It's very durable and every setting can be adjusted manually to ensure perfection. It's currently located in the Netherlands but transportation is no issue. If you'd like to know more. Please inquire!
Detal horizontal/vertical 23 spindle boring machine. Has brand new freud 5mm bits. Boring head is 2 hp 3 phase. Boring head is adjustable from 0 to 90 degrees with the air cylinder. Operation is all automatic with foot pedal, press pedal and air clamps hold material, boring head drills holes to set depth with manual metered adjustment. Operation speed can be adjusted the air valve. Index pins allow for longer boring lines. Buyer to arrange shipping but I will palletize securely strap, and load the machine on a truck or drop at a local terminal free of charge.
Used climax key mill/ line boring portable milling machine model# km3000. Year 2006 115 volt AC/ 0-90 DC drive motor.Milwaukee 0-90 volt DC motor.Minarik DC veriable speed drive model mn23101c-0846 0-90 DC 5amp.This is A used tool in working condition.The motor runs fine and the veriable speed unit works( slows/speeds) great.There is a crack in the rear plastic housing(see pic) of the Milwaukee motor but it does not hold any brushes or key parts just a cover for the wire makeup.The carriage works fine except when reversing the crank it feels like the gears are slipping a little I'm thinking it just needs to be adjusted because the gears look fine from what I can see,forward there is no slipping.I do not have the clamp or chain clamp but the clamp slips are present mounted on side of carraige.This is sold in as found condition I have only ... moretested it as it sits( did not mill anything to test) Looks like a real good unit and has many years left. This item weighs 75 pounds and is being shipped from zip 93285. P.S. if this is to be shipped Fedex it will take longer there is not a fedex up here and it will ship on Tuesdays only. Posted with
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Ritter Model#R-46 46 spindle duel line boring machine. Bought new in 2006. In use till plant closer June 2913. Includes approx. 46 to 50 1/4" boring bits. 32mm Spindle centers Steel gear driven spindles(2) 23-Spindle drill heads(2) 3hp Spindle motors 0" 2" Adjustable table stroke Both heads adjustable from back fence 4" 24" Adjustable between heads Single point panel referencing. Panel indexing pins Foot pedal operated. Weight: 1,341 lbs. 230V 3 phase. ... moreWe have closed our Dallas. Texas plant and will have a large number of machines and tools for sale so keep looking at our offers to few more equipment. Buyer responsible for pickup Wt. approx. 1341 lbs. 7300.00 All sales are final. No warranty.
2005 SCM Multitech Plus- Double Line Boring Machine- Semiautomatic boring Currently under power at our facility- testing available over cell phone video conference Call Justin 1-800-519-7147 ext. 101
You're looking at a Ayen Line Boring Machine LRB32/21. 260 V, 8.5 Amp, 400 V, 4.9 Amp, 2.2 KW, 21 Spindles, 32mm Boringhead, Manufactured in 1982, Item Weight is 1,100 Lbs. BUYER MUST PAY SHIPPING. Payment Options: Credit Cards(Please Call 303-833-4949 to Process) PayPal Shipping Options: UPS Ground. USPS Parcel(unless stated in description) I will ship to: USA and Internationally[Sales Tax] 5.9% for in-state buyers If you don't have a phone number attached to your eBay account please message us with it if you are the winning bidder to help expedite the shipment. We stand behind our products and representations. Refunds will be given if items received are not as represented and they are returned in the same condition as shipped. A return authorization number is required from us and the unit must be returned within 7 days of receipt. ... moreIf you are returning the item because you changed your mind or decided you no longer want the item you will receive a full refund minus shipping. We reserve the right to cancel or end any listing/ transaction at any time for any reason. If you already paid for your item and we cancel the transaction you will be given a full refund. Buyer prepays all return shipping charges. We welcome your questions and will respond quickly. Feel free to contact us about alternative shipping and payment options. Phone: 303-833-4949(7 Days a week 10am- 6pm Mountain Time) Item#7149. Powered by The free listing tool. List your items fast and easy and manage your active items.
Used Detel MV23P Line Boring machinedesigned for top down drilling. Standard features include: drill head with 23 spindles(collet system M10. 10mm shank and 32mm on center) 2 manual index pins; 2 spring hold-downs and 60" adjustable backfence with 4 stops. 230/3. Detel MV-23P single-line drilling machine is designed for top to bottom vertical drilling. The standard version has a drill head with 23 spindles at a 32mm axial distance. The MV-23P also comes with 2 manual index pins. 2 spring hold-downs and a 60" adjustable backfence with 4 stops. All versions are equipped with a foot pedal to activate the pneumatic cycle, hardened steel gears and a welded"u"frame. The MV-23P can be customized in a variety of ways to meet specific applications: a different number of drilling spindles, different axial distance, etc. This flexibility, ... morecoupled with its tough construction, makes Adwood's Detel MV-23P a sturdy workhorse that will deliver precision performance for years to come. WILL CONSIDER SHIPPING- BOXING COST $250/FREIGHT COST DEPENDS ON LOCATION.
32mm Spindle centers Steel gear driven spindles(2) 23-Spindle drill heads(2) 3hp Spindle motors 0" 2" Adjustable table stroke Both heads adjustable from back fence 4" 24" Adjustable between heads Single point panel referencing. Panel indexing pins Foot pedal operated. Weight: 1,341 lbs. 230V 3 phase. Item was pulled out from liquidated woodworking business. Machine is in very good working condition- has been tested and it's ready to go. We can arrange freight in contiguous U.S. You can also come. Pick-up and check what I have at my shop in Santa Anna, CA. 626*329*3980. Flat shipping fee( Local Pickup or freight) U.S. Only. NO international shipping!
Model 20/20 = BB3000 Used- Good Working Condition No boring bar included New power cord on motor Listing this for a friend. If you have questions. Please ask and I'll get back with you as soon as possible. Shipping only to U.S. 48 states
This machine has been in storage and needs a good cleaning. Machine is being sold as is with no warranties. Either expressed or implied.
Variable feed speeds. 14" tool travel with rapid traverse, automatic feed with optional remote control Line boring from 1 1/2– 16” Portable- powerful- easy to use Universal mount for line boring and bore welding– allowing you to set up ahead while you work
Serial Number:1062 23 Spindles 3 hp Motor 30"x 48" Table Foot Pedal Operated Item was pulled out from liquidated woodworking business. Machine is in very good working condition- has been tested and it's ready to go. We can arrange freight in contiguous U.S. You can also come. Pick-up and check what I have at my shop in Santa Anna, CA. 626*329*3980. Flat shipping fee( Local Pickup or freight) U.S. Only. NO international shipping!
You are bidding on a nice used York Model 4-14 package. It has a 2 speed variable Eibenstock motor. It is complete with a 6 foot 1.25 inch bar. 1) head bearing with weld plate, 2) tail bearings each with weld plate,2) 1.25-3.0 inch line up cones,2) new clamp collars. Nice aluminum shipping storage box is included. This is a dedicated Line Boring package with variable auto feed forward or reverse. It is not some home brew, manual feed underpowered mag drill. This unit uses all common parts available from York yorkmachine.com Call with any questions 281-554-9400 Check my profile, bid with confidence.
Conquest 2-46 Dual 23 Spindle Line Boring Machine General Info: Stock# CD-141048 Machine Name: Conquest 2-46 Dual 23 Spindle Line Boring Machine Condition: Used. Excellent Tested: Yes. Good Working Condition Brand: Conquest Model: 2-46 Serial: 1330123 Year: 2006 Shipping Weight: 1350 Lbs. Shipping Dimensions: 60" L x 52" W x 64" H Location: Stone Mountain. GA Specifications: Conquest 2-46 Dual 23 Spindle Line Boring Machine. Number of drill spindles 2 x 23(46 Total- 24 lefts& 22 rights) Distance between drill centerlines 32mm(1-1/4" Distance between the first and the last spindles 26-1/2" Distance between both boring heads 5-1/2" to 25-3/4" Maximum depth of a stroke 2-5/16" 120" Fence Capacity with 4 Flip Stops, Pneumatic Foot pedal operation, Required air pressure 80 to 100 psi, 2)2HP Baldor ... moremotors, 220V, 3-Phase. Additional Info: The Conquest 2-46 Dual 23 Spindle Line Boring Machine has been tested and is in good working condition. Everything on machine is in excellent condition. Machine was taken very good care of. If you are looking to upgrade to this Conquest 2-46 Dual 23 Spindle Line Boring Machine from one you are currently using visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
GREAT RUNNING MACHINE A REAL WORKHORSE. IM RETIRING AND SELLING OFF MY EQUIPMENT.SEE MY OTHER LISTINGS FOR OTHER GREAT TOOLS Two 22-Spindle Drilling Heads• Each Powered by One 2 HP Motor• Heads are Individually Controlled• 32 mm Spindle Centers• Maximum Drilling Depth: 3" Both Drilling Heads are Adjustable In and Out• Distance Between Heads: 5" 25-1/2" rear Fence• Air Indexing Pins• Two Overhead Pneumatic Hold-Downs• Foot Pedal Operation
detel m2h double head line borer great working order Check out my!
Ayen SKB 50 swivel head dowel boring machine for dowel construction frame and cabinet making. The SKB-50 comes standard with a large precision scale for angle boring and a 3-hp motor for heavy millwork boring. ï SKB-50- 50 Spindle Drilling Machine with Pneumatic head raising. And lowering. Swiveling drill head has 25 spindles on each side. The spindles are spaced at 32mm centers. The patented swiveling gear box enables the operator to completely reset the machine from dowel drilling to shelf hole drilling in under one minute. The SKB-50- is unsurpassed in versatility as it can drill holes for every type of dowel joint and European hardware. Very good condition. Limited use in recent years. Unit is available for inspection in Norwich New York. Call 607-336-7353 for appointment. Buyer can either pick up in Norwich NY or arrange for shipping ... moreat their expense. The following basic rules apply for buyer arranged shipping: Must give us at least one day's prior notification and pick-up must be made between the normal shipping/ receiving hours of 8 AM to 2:30 PM. FOB is the sellers dock. The buyer takes responsibility for the unit once it leaves our dock. The unit must be picked up within 7 days of the end of the auction. All Sales are final.
These are a pair of Berco BC 5 Line Boring Machine Bearings Size: 25mm. Stock# 00254) We have 1 available for purchase at $800.00 for the pair. We do combine shipping charges on multiple purchases based on the cost to ship. Check out other items at our eBay store. We sell new and used engine rebuilding equipment. Machines, and parts! Visit our website at www.rtsales.com. If you have any questions please free to give us a call at our office or send us an email. Thank you. RT Sales. Office: 248-887-0422. Office Hours: Mon. Fri. 9am to 5pm.
23 hole line boring machine. drill 23 perfectly spaced hole in seconds. i bought this brand new. it has very little use. drills from the bottom up and comes with 22 through bore bits. i used it to drill 8 foot panels. it work like new and has been well taken care of. very little signs of use. please contact me with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-144aa8b08c6-0xe5-
Portable line boring machine. Powered by magnetic base drill(not included) bore 2"4.500" holes. Great cutting machine. Everything you need to start boring. Drill not included! Any questions call scott 314-605-4223.
IF YOU ARE READING THIS AD YOU KNOW WHAT THIS MACHINE CAN DO IN A MFG. ENVIROMENT. LOTS OF INFO CAN BE FOUND AT THE RITTER WEBSITE IF YOU WANT SPECS.SIZE OF MACHINE,WEIGHT AND SO ON. RITTER IS LOCATED IN CALIFORNIA AND HAS PARTS.SERVICE,PHONE HELP ETC. READILY AVAILABLE. RIGHT AND LEFT HAND BITS ARE AVAILABLE FROM MANY SUPPLIERS. BOTH ON LINE AND LOCAL,IN MOST CITIES. AS YOU CAN SEE IN THE PHOTOS THERE IS AN ADDED FEATURE TO MAKE SETTINGS AS ACCURATE AS POSSIBLE. DESIGNED AND MADE BY ACCURATE TECH. THIS MAKES SET UP AND CHANGES MUCH EASIER. THE MOTORS ON THIS MACHINE ARE 3 PHASE. NOT SINGLE PHASE, SEE THE PHOTO FOR MORE INFO ON THE MOTORS. attn please: ebay makes it difficult to clarify shipping details. Our position is that you can arrange shipping if you so desire. The zip code here for your trucking firm to quote you a price is 85296.And ... morethe weight of the machine is 1300 lbs approx. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144b7876a4e-0x10e-
Climax Model 65 Hi This keymill is in very nice shape not used very much. Up for sale is a Climax portable key mill Model 65 keymill line boring Portable milling machine. Shipping will be $95.00 Thanks for looking and God Bless!
Here up for sale is a German built Ayen construction boring machine DB 1000 K23. This boring machine is in great working shape and has no broking parts very clean machine. Borer holds 23 boring bits on 32 mm centers. Great for construction boring and line boring for cabinets. this is a 3 phase machine machine that drills from the top down and lays down and drills on the flat. I have a phase converter that will go with this machine if you need it run it on single phase 220. Machine also needs compressed air from your compressor to run. Comes with 2 fences 2 stops wrenches and some bites. A must have machine for all kinds of drilling. also have the manual. Buyer to arrange shipping there will be a 125.00 crate charge added to total. machine alone weighs 350 kg any questions please call 1-518-965-6555 or please email me thank you
Normal 0 false false false MicrosoftInternetExplorer4 DETEL Line Boring Year: 2005 Model: M-29 This machine is located in Northern California. Please make sure you check out our other auctions for other great deals on used woodworking machinery and CNC Technology. We also have several machines available including a large format CNC Router. FUNCTIONAL GUARANTEE. WE DO NOT SELL MACHINES THAT DO NOT RUN! 100% positive feedback! Machine Specifications: Vertical/Horizontal Drilling 29 spindles drills vertically from bottom-up drills horizontally from back or any angle between 0-90 degrees tilting action of boring head is pneumatically controlled distance between the 1st and last spindle is 35.2" max. boring depth is 3" boring head with(2) 2 HP 2.800 RPM motors 44" x 21.4" table size complete with(4) pneumatic hold-down cylinders ... moreleft& right-handed side fences with(2) mechanical flip stops foot pedal control for clamping and boring cycle 5 tool holders for the drills Please email with any questions. While we do not offer warranties on the sale of used equipment we will guarantee that all major functions of this machine will be in working order upon pick up. SAFETY DISCLAIMER- Buyer/Purchaser fully understands that the possession and operation of any industrial equipment or machine has inherent dangers and safety requirements. Buyer/Purchaser agrees that he/she has complete working and operational knowledge related to this item. As it relates to safety guards, rotating parts, cutting tools, electrical shock, safe operating speeds, and any other components of the machine, present or missing. Buyer/Purchaser agrees to hold Seller and his agents harmless from any injury or tort resulting from the operation or possession of this item. Our liability is limited to the Selling price of the item. Shipping to your door is not included but quotes are available upon request. You may also pick up machine in Northern California.
BLUM MSP Mini Press MiniPress Tabletop Boring Machine W/ 7 Spindle boring Attachment several attachments. The machine requires three phase power. Comes as shown with Blum seven spindle line boring attachment and a few other pieces including the operating manual. Works. No longer needed. All information is thought to be correct. I will quote shipping when I know where it's going. Local pick up is free. This item is used and offered As-Is. Where-Is. NO WARRANTY IMPLIED
Old AMMCO Model#400 Universal Line Boring Machine Don't Know Much About This See All Photos It Is In An Old. HEAVY Wooden Box We Don't Know If All The Parts Are There Feel Free To Contact Us& Ask Questions We'll Try Our Best To Answer It Is Available For Inspection In Malden. MA Local Pick-Up Only.Boston Area Email Us With Any Questions or For More Pics Check out my! Be sure to add me to your! Thanks For Looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144fcfc0149-0x119-
This is a used Line boring machine. Built in 2005. Very sturdy and solid machine. Has seen very little use. Still has the original bits in it. We can arrange shipping LTL for you if you cannot pick it up.
This is a 46 hole line boring machine set-up for 32mm hole pattern. It is 3-phase and is on rollers and requires air. They still manufacture this machine for near $10.000.they are very good about helping w/problems or parts. I have only had to replace a fuse. I have used it probably for a total of 50 hours over about 5 yrs. I ran my business. It is in excellent condition. I do have a rotary phase converter for sale also if you do not have 3-phase power. It is a Convert-a-phase 7-1/2 hp. machine w/breaker boxes and shut-off switch already wired and ready. I want $1400 for it. Shipping and payment: I will accept cash only or bank transfer. Local pick-up only.I will get ready for shipping but you will need to pay for it- you will need to arrange for a truck w/a lift gate to come to my shop.
Delta 32-325 3/4HP 13-Spindle Horizontal Line Boring Machine General Info: Stock# CB-141002-37 Machine Name: Delta 32-325 3/4HP 13-Spindle Horizontal Line Boring Machine Condition: Used. Good Tested: Yes. Good working condition Brand: Delta Model: 32-325 Serial: 04E80640 Year: N/A Shipping Weight: 175Lbs. Lbs. Shipping Dimensions: 48" L x 40" W x 48" H Location: Stone Mountain. GA Specifications: Delta 32-325 3/4HP 13-Spindle Horizontal Line Boring Machine. 3/4HP Drive Motor. 115V, 1Ph, 13-Spindle Collect Diameter 25/64" Center Distance of Spindle 1-1/4" Drill Stroke 2" 16" x 19-3/4" Table, Cord& Plug. Additional Info: The Delta 32-325 Line Boring Machine has been tested and is in good working condition. Machine can be shown under power for inspection. Seller Contact Information: Mark Davis 404-272-1285 ... moreThe Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week\
Vitap Line Boring Machine model#Linea63N Yr 1998 Custom Built Machine. 3 Rows of 21 Spindles. Complete with 63 New Carbide Drill Bits. Cleaned& Checked. Please call Kevin Reardon 239-250-1528 or 239-947-0348 for more pictures or information FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM Posted with
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! FOR ALL QUESTIONS PLEASE CONTACT US WITH ANY QUESTIONS 925-872-0929 OFFICE CSWAFFORD925@GMAIL.COM THIS MACHINE HAS PASSED AN ALL POINTS INSPECTION AND READY TO SHIP! Used Unique 523 Heavy Duty 23-spindle Line Boring machine. 32mm centers, Foot pedal actuation of heads, Drill bits currently on machine are included Contact Information: 925-872-0929 Cswafford925@gmail.com Financing Available Payment Methods: Visa. Mastercard, Amex, Check, Cash Location: California Please contact for Terms and Condition We offer no warranties on the sale of used equipment. However. We do guarantee that the machine will be in good working condition upon delivery to your facility. We will ship Via Air Ride Flat Bed. Across the entire United States, and Canada. International Shipping as well. Please ... morecontact us for a freight rate. Auction Bid does not include Shipping Price, or Sales Tax if Applicable. On Nov-15-09 at 10:04:49 PST. Seller added the following information: On Aug-03-10 at 12:47:12 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio!
DESCRIPTION: 3 phase. 22 spindle unit w/ pneumatic clamps and foot pedal control. INSPECTION: This machine is available for inspection Monday thru Thursday from 10am to 6pm in Vista. CA(North San Diego County) TERMS: All machines are sold"as-is" without warranty. Winning bids are final. Please do not bid if you do not intend on paying. PAYMENT: Upon end of auction. Payment of $500 or 10% of winning bid(whichever is less) must be made via PayPal within 48 hours. Payment in full must be made within 7 calendar days. We accept personal check(machine may be picked up once check clears) cashiers check, wire transfer or cash. SHIPPING: Buyer is responsible for shipping or pick-up. However. We do have forklifts and will happily assist with loading. CONTACT: Please feel free to message us with any questions.
Biesse FORECON 50 Horizontal& Vertical Boring Machine General Info: Stock# EH-513-4-001 Machine Name: Biesse Forecon 50 Horizontal& Vertical Boring Machine Condition: Used. Good Tested: Yes. Good Working Condition Brand: Biesse Model: FORECON-50 Serial: 134/79 Year: 1979 Approximate Shipping Weight: 1500 Lbs. Approximate Shipping Dimensions: 72" L x 40" W x 68" H Location: Stone Mountain. GA Specifications: Biesse FORECON-50 Horizontal& Vertical Boring Machine. 1) Horizontal Head with 20 Spindles& 2) Vertical Heads with 15 Spindles Each. Step between drills is 32mm, Maximum Boring Depth with Horizontal head is 70mm& 32mm with vertical heads, Bottom Heads are rotatable, Maximum Power is 6Kw, 230V, 3-Phase. Additional Info: The Biesse FORECON-50 Horizontal& Vertical Boring Machine has been tested and is ... morein good working condition. Unit comes with Rail Extensions. Bit Holders& extra bits. This machine can be shown under power for demonstration. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
AYEN LRB32/21 21 SPINDLE LINE BORING MACHINE DRILLING AYEN LRB32/21 LINE BORING MACHINE DRILLING THE LINE BORER WORKS BUT THE PNEUMATICS ARE NOT WORKING WELL. SOMETIMES IT WORKS AND SOMETIMES IT DOESNT. IT MAY NEED A NEW VALVE OR MAYBE SEALS IN THE CYLINDER I AM NOT SURE. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE DRILL IT WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A HOUSE OR BUSINESS AND IF YOU HAVE A FORKLIFT FOR UNLOADING AND IT WILL GET YOU A QUOTE.
This auction is for one Genuine Kwik Way LBM Centering Ring Re-Sizing Arbor Part# 071-0130-06 The arbors are most likely New Old Stock- some have light surface rust. A little wd-40 and scotch brite and they will look new again. Listed as Used. Picture is of one of the arbors- multiple available. I also have many centering rings available- see my other listings or Call the number below! Please see photos to verify condition of the item! Payment must be made/arranged within 4 days of auction close. Contact with any questions in regards to payment. I prefer to ship UPS Ground so I can track and insure however at times I do ship USPS. Please contact me with any questions or to inquire about shipping out of the lower 48 states before bidding. Free Shipping to the lower 48 States only. With insurance! Please contact me for quote if located outside ... morethe lower 48 states. I will combine shipping to help buyers save on shipping cost. If interested internationally please contact me to figure out the most economical shipping method. Thanks for looking and please check out my other auctions. And look at my future listings as I will have many more automotive machine shop tools for sale. Buy with Confidence! Please Call Kris at 712 520 2015 with any questions.
For Sale is a Used Ritter R-23 Line Boring Machine Unit sell as shown in pictures. Save Big $$$$$ 23 Spindle Head moves forward and backward Optical Digital Read Out Tested in our shop 11/19/13 ship weight"machine only" approx 1100lbs Save some money $$$ today!Call for Special Pricing! We advertise all our items locally. Nationally, and on social media. We reserve the right to cancel this listing if it sells elsewhere. SHIPPING- We can deliver local ly in Indiana. Call for price. Freight to all other lower 48 States, no handling fees for loading =(F.O.B. You pay for and arrange all shipping to and from 46149 Call 317-994-5537 for local pick-up. Liztonlp 7% sales tax applies to Indiana residents and local pick-up unless Tax Exempt. SAVE $$$$.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1467d7d8447-0x109-
Good working condition Marcon M6500. This is a dual head machine with 46 spindles. The heads can be activated independently by selector switch on base of unit. This is a real time saver. Prefer local pick- up. But will ship. Buyer pays cost of shipping.
Original owner. 2000 model, double head, drills forty six holes, thirty three a head, front head will slide forward up to thirty six inches, air/electric, single phase, 220 volt, foot control to run heads.
Stock Number: 683 SCMI Model Linetech Two Row 32mm Line Boring Machine Condition: To Be Cleaned and Checked Specifications: Two 21-Spindle Drilling Heads• 32mm Centers• Two 1-1/2 HP Motors(One for Each Head) Quick-Change Style Drill Chucks• Pneumatic Actuation Via Foot Pedal• Horizontal Adjustment of Either Head Via Manual Hand-Cranks• Mechanical Digital Readouts for Head Placement• Two Over-Head Pneumatic Hold-Downs• 3ph Power This machine can either be picked up or shipped. We can provide a freight rate upon request. Dims: 66" L x 48" W x 62" H Phone: 570-584-2002 Your Source for Industrial Woodworking Machinery! by adding my eBay Store to your Favorites! Thanks!
We have for sale in excellent condition a Vitap Forma 63 Construction/Line Boring machine. This was used by the owner as a double spindle line boring machine and the Horizontal heads were never even ran. We purchased from the importer of Vitap the chucks to make the horizontal head useable. This machine has one motor per each head and they are 1.5hp/230V/3ph Motors. The RPM of the motors is 2800. 1-Horizontal Drilling Unit with 21-heads. 2-Vertical Bottom drilling units with 21 heads each. Vertical Heads rotate 360 degrees with pneumatic locking in 90 degree position. Spacing between vertical heads 5 5/16"33 1/2" Both heads with screw thread adjustment and mechanical digital readouts. Independent controls on all heads with adjustable feed stroke rates. Complete with(4) adjustable pneumatic holddown pistons on rear fence line and(1) ... moreoverhead pneumatic holddown clamp. Boring cycle sequence selector and foot pedal controlled boring cycle. 2002 machine in excellent condition. Please give us a call at 417-781-1222 if you have any questions.
For sale: 1) Delta 13 Spindle Line Boring machine. This piece came out of our shop which was closed a few years ago. And has seen hardly any use in the last five years. As you can see from the pics, a nice clean machine. This is perfect for the small cabinet shop, and makes drilling shelf pin holes a breeze! The 32-325 includes 3/4HP. 1,725 RPM, single phase motor, table and fence assembly, left and right indexing pins, left and right work stops, 13-spindle boring head, see-through spindle guard, telescoping handle, table, adjustable depth stop, steel support structure and base, wrench and literature holder. Does not include the stand. Specs from the Delta site: Large. 16" X 29 3/4" table provides a full 12" of work space in front of the boring head for boring extra-large boards, Fully-adjustable table and fence assembly features ... moreeasy-to-read English and metric scales for quick set-up and accurate boring, Indexing pins help operator to maintain correct spindle alignment for resuming line boring operations in long work pieces, Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel boring patterns, Adjustable depth stop controls the downward travel of boring head, Heavy-gauge. Sheet steel support structure has a sturdy steel base with holes for bench or stand mounting, Powerful 3/4 HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates, Large-capacity. 13-spindle boring head comes with a see-through spindle guard for safety, Length: 28.5" Width: 30" Height: 32.5" Weight: 98 lbs,
Excellent condition. Barely used Conquest Mini 1-13 Line Boring Machine. Made in the USA. 8" drilling capacity. Heat-treated Steel helical gears; NOT plastic, Powered by Baldor motor. Top-down drilling for easy viewing. Easy operation. Standard Features and Specifications: 13 spindle boring head, 8" drilling capacity(distance from edge of board that can be drilled) 3/4 hp Baldor motor. 115/230(9.6/4.8 amps) 60 Hz. Single phase. Totally enclosed frame prevents internal motor components from being contaminated by dirty shop air. Two spring-loaded indexing pins. 30" fence and two flip stops. 32mm(1-1/4" boring bit center line. Motor speed = 3450 rpm. Spindle speed = 3450 rpm. Machine weight aprx 110 lbs. This machine is very clean and in excellent condition. It appears to have been used very little. We tested it and it performed ... moreflawlessly. It includes the operating instructions. Due to its size. We must ship it via freight. We will strap it to a pallet. If you have a shipping company that you use, they can pick it up from us at no additional charge. We do NOT have a loading dock, but we have guys that can lift it into the trailer if necessary. If you use our shipping company, then you will have to pay the amount shown in the calculator for shipping. We are located just outside of Savannah. Georgia and near the Ga/SC state lines. We may be able to use a local courier for short deliveries. You may pick this(and any other of our items) up from our warehouse. There is no charge for local pickup. Powered by The free listing tool. List your items fast and easy and manage your active items.
Used Ritter R-46 32MM Line Boring machine Woodworking Machine- Comes will all drill bits shown Two rows of 23 bits on 32mm centers Single Point Panel Reference Panel Indexing Pins Gear Driven Heads 48" Back Fence Assembly with Pins Foot Pedal Operated(2) 3HP 3 Phase Motors 220/440V FREE SHIPPING on a pallet to a business location with a forklift in the lower 48 states. No residential shipping. Optional: Item will be Fully crated(recommended) for $250 Shipping Info: 53x36x51" Tall/ Approx 1250#
Welcome to our auction! Feel free to ask questions. We can usually respond within 24 hrs. Payment is expected within 3 days of auction close. Unless prior arrangements have been made. Payment by Paypal only please. Combined shipping cost is calculated by the total package weight. With a further discount for each additional item purchased. Shipping is FREE on a combined purchase over $100 Refunds must be requested within 3 days of receipt. You are responsible for return shipping costs. In most cases your item(s) will be shipped the following day after payment has cleared. Purchases over $150 will be insured at no extra cost and require a signature on delivery. 5 mm Drill Bits- Blum Machine- Line Boring- 3 pairs 6 Bits- Sharp Description: For use in your Blum Machine multi spidle line boring attachment. Fresh back from the sharpener with ends ... moredipped. Right and Left Hand rotation. 3 sets of 5mm bits. All items are carefully inspected and any noteable defects that are not obvious in the pictures are mentioned in the description. We strive to give you a clear picture of what you are buying. As if you were holding the item in your own hands. If you need more detail, questions are encouraged and always welcome. gsrx_vers_577(GS 6.7.5(577)
BUYER MUST EMAIL PRIOR TO PURCHASE FOR ACCURATE FREIGHT& CRATE CHARGES Ritter 23-Spindle Vertical Boring Machine Model: R-46-V-SP Year: 1998 Condition: Excellent Rating: 3) Used/Tested Replacement Cost: $ 14.000.00 Technical Specifications: 230V. 60CY, 3PH Equipped with Pneumatic Clamping& Feeds All specifications are listed to the best of our knowledge. Please email with any questions prior to purchase. Machine Ratings: 1) New Surplus: Equipment or parts are new. 2) Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us ... moreas an individual part or integrated equipment that could not or was not tested. Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. Shipping: Buyer is responsible for all shipping. Crate, freight charges, and any applicable taxes. Items will be shipped within 10 business days from the date payment is received/cleared. A tracking number will be provided upon shipment of your item. Please ensure we have the correct and current information to avoid delay
35x VERTICAL SPINDLE Zangheri& Boschetti Mdl. B-35-S LINE BORING WOOD WORKING MACHINE SN: 601-86(NEW IN 1986) UNIT IS COMPLETE AND WAS TAKEN FROM SERVICE IN WORKING CONDITION MACHINE IS IN EXCELLECT CONDITION AS PICTURED. Includes extra tool holders(33x- shown in box) and some brand new tooling SELLING AS IS WHERE IS BUYER IS RESPONSIBLE FOR ALL SHIPPING AND RIGGING COSTS
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ RITTER R23 LIN E BORING MACHINE W/PROSCALE This is a great single row line boring machine because it has many options that allow for easy set up. It feature twenty three 32 mm center spindles. First off you have twin stops on the back fence followed by twin pin sets in case you need to drill longer than 23 holes. On the top beam you have a built in tape so you can set the head up easily for the second row. To ensure repeat-ability you also have 3 flip stops up top to guarantee you can index between one.Two, or three rows precisely every time. Add to this an Accurate Technologies Pro-Scale and you have the ultimate precision for a single row machine. 3hp 230/460V machine is currently wired 230V. Foot pedal operated. Terms& Conditions: 1. Please ask all questions before ... morebidding. 2. Winning bidder will pay actual freight charges. We do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10.000 of coverage 3. Please call(630-229-6705) or email( info@360degreemachinery.com) us for full freight options. There will be an additional $100 crating charge on this item if shipped common carrier to protect against theft and damage. 4. Illinois transactions must add 7.25% sales tax unless tax exempt. 5. Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with zero mark up. We also have third party insurance available at a rate of $40 per $10.000 to pr
Nichols 4 Head Vertical Line Borer General Info: Stock# CD-141094 Machine Name: Nichols 4 Head Vertical Line Borer Condition: Used. Good Tested: Yes. Good Working Condition Brand: Nichols Model: N/A Serial: N/A Approximate Shipping Weight: 2000 Lbs. Approximate Shipping Dimensions: 88" L x 60" W x 76" H Location: Stone Mountain. GA Specifications: Nichols 4 Head Vertical Line Borer. 4) Independently Adjustable heads, Approx. 13.5" Manual Throat adjustment, 3) 2HP 230/460V(Wired 230) 3Ph Motors, 1) 1HP 230/460(Wired 230) 3 Phase Motor, Each head has its own on/off switch to run as little as 1 at a time or up to 4 at a time, Foot Pedal Table Raise, Safety Stop Bar, Cord& Plug. Additional Info: The Nichols 4 Head Vertical Line borer has been tested and is in good working condition. Below is a video for demonstration. ... moreWe are glad to show unit under power. We ship out next day after payment is received. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
Very nice. Clean unique line boring unit. Very Low use on this machine. Home shop use. Will ship for free
800-380-4913 SKU: IP3563 Ritter Line Boring Machine 8 Spindle 220/440V 3 Phase. Brand: Ritter Condition: Used Notes: 30 Day Warranty Type: Vertical Boring Machine Other: 8 Spindle Voltage: 220/440 Vac Phase: 3 Phase Horse Power: 0.5 Hp Power Source: Electric This is a USED Ritter 8 Spindle Line Boring Machine. Brand: Ritter Voltage: 220/ 440 Vac 3 Phase Horse Power: 0.5 Hp Type: Vertical Line Boring Machine Table Size: 48" Wide x 28" Deep 6 1/8" Centers Side to Side 3" Centers Front to Back Rear Fence with(2) Adjustable Stops Pneumatic Foot Operated Controls Industrial Parts R us is a fast growing Internet wholesale outlet for surplus parts and industrial equipment. We are conveniently located in Central Kentucky. And ship worldwide. The majority of our customers buy our equipment for resale to the end user. We make every ... moreeffort to keep our overhead low so we are able to pass on the lowest prices in the industry. EXPERIENCE Our staff has a combined 40+ years of industrial control engineering. Factory maintenance and security. EDUCATION On our staff we can boast of a Master Contractor. Journeymen Pipefitters, Journeymen Electricians& Security Specialist. All with college hours& apprenticeship training. SKILLS Industrial Maintenance. Electrician, HVAC Maintenance, Control Design, Boiler Maintenance, Security& Public Safety, Welding, Machinery Moving/ Removal. Industrial Parts R Us Accepts PayPal& Visa. Mastercard, Discover, AMEX. We are always happy to accommodate our customers and fully understand the importance of timely shipping. Please view our shipping policies below to better understand how we can help you. All"non-freight" orders placed before 10:00 A.M. EST will be shipped the same day. All orders placed after 10:00 A.M. EST will be shipped on the following day. All smaller items 70 lbs. and under ship USPS Priority Mail. Larger packages up to 150 lbs. will be shipped UPS Ground Service. Next Day Service is available if order is placed by 3:30 P.M. EST. For Emer
Climax Model KM3000 Hi This keymill is in very nice shape not used very much. Up for sale is a Climax portable key mill Model KM 3000 keymill line boring Portable milling machine. Shipping will be $115.00 Thanks for looking and God Bless!
This is a Blum Mini Press line boring machine. The machine is in good condition and runs great. We used it for many years. But have recently upgraded equipment and no longer have any need for it. It has 7 bits. It also has stops set up along the fence that allow for continuous boring in 32mm without using the drop in pins. It is 3 phase 220v. Price does not include shipping. Can Be pick up locally or shipped anywhere in the U.S.
Delta 13 Spindle Boring Machine. Line Bore 32-325. Retiring from this phase of cabinet building and it is time to part with this beauty. Well cared for this 13 spindle line bore machine is ready to go to work with a complete set of bits($ price at $150 or more $) The DELTA 32-325 3/4 HP. 13-spindle line boring machine handles small and large workpieces with ease. The indexing pins help to maintain correct spindle alignment for extra-long materials, and the large 16 x 29-3.4-inch table provides 12 inches of work space in front of the boring head for larger boards. Parallel boring patterns are a cinch with the 32-325 thanks to its strategically-placed work stops on either end of the fence. The powerful 3/4 HP motor provides 1,725 RPM to the 13-spindle boring head which is plenty of power for even the hardest of laminates. This high performance ... moreboring machine is also durable and built to last. The support structure is made from heavy-gauge steel and has a sturdy steel base with mounting holes for bench or stand mounting. Ideal for cabinet making. Millwork, and woodworking shops, the 32-325 Line Boring Machine’s single phase-3/4 hp motor works well in hardwoods and laminates drilling for shelf pins. The large, 16 x29-3/4 inch table provides big work area for extra-large boards. Adjustable table and fence have English/metric scales for quick set-up and accurate boring. Indexing pins help operator maintain correct spindle alignment for line-boring operations in long pieces. Work stops on either end of the fence allow operator to perform parallel boring patterns. Adjustable depth stop. Thirteen-spindle head has a new see-through spindle guard. As a used machine. Expect the usual cosmetic defects common with the use of this type of equipment. The machine will be partially disassembled for transport to save money. Reassembly is straight forward being covered in the PDF manual that is included. inkfrog terapeak. InkFrog Analytics.
Normal 0 false false false EN-US JA X-NONE Hi thanks for looking at my auction i had a shop for about 7yrs and bought this machine in 2007 from original owner. Closed the shop about 3 years ago so its been in the storage for couple years now. And i need to sell it. it is in great condition and well taken care of. When I got it I went through it and changed all the brass bushings and seals added the collapsible table so doesn’t take up much room. It coms with two sets or bits if you have and question please ask or if interested please contact me before you buy now. Please Look at my other auctions for more machinery. Here is a little info about the boring machine Date of Manufacture: 1997 spindle drill from top down. 32MM centers drills 46 holes at once Adjustable distance between rows 4" 22" 30" x 48" table cycles up and ... moredown. Added swing out for longer material 48" backfence with 2 stops pneumatic indexing pins for continues drilling Normal 0 false false false EN-US JA X-NONE Foot pedal operated individual shot off for each row
2000 RITTER 23-Spindle Line Boring Machine(Woodworking) Model R19F 3 phase 230 volt. For local pickup in Dekalb il 60115 or buyer arranges shipping, I have a dock and forklift and will band to a pallet and load at no charge. Questions Scott cell 815-260-7629 32mm spindle centers, Steel gear driven spindles, Foot pedal operated cycle, Panel indexing pins, Weight: 760 lbs.
Kwik Way"LBM" Main Bearing Line Boring Machine Portable Boring bar I Was Told This Was a Kwik Way But the Tag on the Box is Unreadable So Decide For Yourself What it is. I Do Not Have to Sell This so the Price is Firm. PayPal or Cash Only. As-Is. No returns.
The L2500 Specs: Maximum length of block 100 inches( 2500mm)