In 
 
Order by: 
Available to: 
Price: 
 - 
$
39.99
4d 1h 29m 3s
0 bids
$16 Shipping
Condition: Used
Location: Mount Pleasant,UT,USA
$
112.75
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
The is a router bit adaptor for the Delta HD shapers with the straight shank. Use your router bit profiles on a really heavy duty machine. The adaptor ... morewill take 1/4" and 1/2" shank router bits. The shank on this adaptor is.562. Check this to be sure your spindle shank is this size. There are no shipping charges on this item if shipped to any US address. I do ship internationally. Just email me your location and I will quote shipping to your country.
$
18
3d 19h 10m 38s
1 bids
$4.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
$
480
4d 18h 4m 48s
0 bids
$0 Shipping
Condition: Used
Location: Corvallis,OR,USA
$
135.79
Buy It Now
$0 Shipping
Condition: New
Location: Beaver Falls,PA,USA
$
125.21
Buy It Now
$0 Shipping
Condition: New
Location: Beaver Falls,PA,USA
$
579
Buy It Now
$0 Shipping
Condition: Used
Location: Dallas,TX,USA
$
169
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
$
8.74
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
This is item no. 904-05-010-1646. The is the locking washer for the 1/2" shaper spindle on the Delta shapers. Without the tab on the washer the nut ... morecould work loose and then stand back! This may fit other makes also. The tab is under 1/16" wide and 1/16" long. These do wear out in time and have to be replaced. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. This washer will also work on the Walker Turner 700 series model 99PM2313 shaper. The Yates, and the Atlas shapers.
$
36
Buy It Now
$5.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
$
14.25
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
Replacement arbor nut for a Delta Unisaw table saw. This is a"new" machined arbor nut to secure the saw blade in a Delta tablesaw. Several hundred ... morehave been manufactured and sold in the last year. We saw the need for this item and developed a replacement and even better Delta Unisaw arbor nut. This nut has the odd. Hard-to-find 5/8" left hand square shaped thread as used on the more popular right tilting Delta Unisaws and some other brands. The outside dimension of the hex of this nut is 7/8" across the flats. The nut is heavier duty and thicker than the original equipment nut and works with all regular blades and most dado blades. The thickness of this nut measures. 475" As compared to the OEM stock nut at. 265" As a stringent quality control check. We spin each and every one of these nuts on and off a new Delta Unisaw arbor by hand to insure our thread quality. We run these in small 50 count batches. So It is not unusual to find this item on"back-order" Buy the one you need. Plus a"spare" while they are available. Shipping is FREE to anywhere in the lower 48 states. Shipping to other locations will be calculated based on zip code and quoted before payment is accepted. Payment by PayPal is preferred. Payment must be received within five days of the auction close. If our other Delta Unisaw. Conventional table saw, and other Delta equipment items are not currently listed on eBay, please contact us. We manufacture and offer the following parts for improving, upgrading, and/or restoring your vintage Delta Unisaw or shaper: Hard-to-find LH threaded arbor nuts A new and improved blade wrench A unique"no-drill" wrench hanger Improved Allen bolt rail mounting kit A heavy duty billet aluminum miter fence New stainless steel Unisaw and Delta Mfg switch plates New stainless steel vertical Delta dust door nameplate Replacement Delta Unisaw and shaper toggle switches Replacement brass bullets for the vertical and tilt lock shafts Economical replacement dust doors A
$
18
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
36
4d 4h 33m 6s
0 bids
$8.75 Shipping
Condition: New
Location: Algonquin,IL,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
34.95
Buy It Now
$15.05 Shipping
Condition: Seller refurbished
Location: Flushing,NY,USA
$
36
Buy It Now
$5.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
$
47
Buy It Now
$10 Shipping
Condition: Seller refurbished
Location: Freeland,MI,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
154.8
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
25.35
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
Replacement switch plate covers for your vintage Delta UNISAW or other Delta machines. HURRY! Delta Unisaw and Rockwell Unisaw plates are almost gone. ... moreSEE BELOW This sale is for a"new" switch plate cover any one of your pieces of vintage Delta shop equipment. The original switch plate covers were made from thin aluminum and were easily dented. Dinged, damaged, or lost. We have several styles of Delta and Delta Rockwell plates available. All are newly manufactured and better than the originals. All of these plates are made of stainless steel and have been carefully and painstakingly recreated from the dimensions of the original plates and from the original artwork. The switch plate blanks were laser cut from.030" thick 304 stainless steel before being carefully deburred and brush finished. Prior to the high quality screenprinting of the artwork. Four different Delta switch plate styles are currently offered: Item A" The black Delta UNISAW plate was used on all Delta table saws up to around 1945. When the plate was changed to include the Rockwell name. Only two pieces of this plate are left. Item B" The black Rockwell/ Delta UNISAW plate was used on all Delta table saws built after Rockwell acquired the Delta company somewhere around 1946. I believe the original part number for this Unisaw plate with the now added Rockwell name is 41687. Only three pieces of this plate are left. Item C" The black Delta Mfg. plate was used on early Delta woodworrking equipment. includung the Delta shapers, until sometime in the early 1940's. I believe the Delta part number for this black plate was 41685. Item D" The red Delta Mfg. plate was introduced around the 1941-1942 timeframe to differentiate from the black switch plate of the now very poplar Delta UNISAW. I believe the Delta part number for the red plate is 41686. IF YOU ORDER. YOU MUST SPECIFY(EITHER BY ITEM# OR BY DESCRIPTION) AS TO WHICH PLATE OR PLATES YOU WISH TO RECEIVE. YOU CAN DO THIS ON YOUR PAYPAL PAYMENT FORM. WHERE IT ALLOWS
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
Delta 09-106 90 degree V groove shaper cutter. New, 3 lip 1/2" spindle
$
13.99
Buy It Now
$3.25 Shipping
Condition: Used
Location: Worcester,MA,USA
Vintage Cutter#D-128 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter ... moreincluding severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
$
39.99
Buy It Now
$7.99 Shipping
Condition: New
Location: Center Harbor,NH,USA
Delta Carbide Shaper Cutter 45-928 Flute and Convex. 3/4" Bore, 2.46 O.D. with 1/2" bushing. New old stock
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Mystic,CT,USA
$
6
Buy It Now
Free Shipping
Condition: Used
Location: Pottstown,PA,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
14
4d 4h 40m 0s
0 bids
$4.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
Delta/Rockwell Shaper cutter# D-214. A panel raising cutter. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my ... moreother auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
$
89.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bath,ME,USA
$
4.2
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
59.97
Buy It Now
$15.05 Shipping
Condition: Used
Location: Flushing,NY,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
16
Buy It Now
Free Shipping
Condition: Used
Location: Pottstown,PA,USA
I am listing a lot of shapers that came with my Delta Heavy Duty Shaper. Please see pictures for condition and shape. If the cutter had a D number. I ... morelisted it in the title. Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
$
12
4d 4h 40m 0s
0 bids
$4 Shipping
Condition: Used
Location: Algonquin,IL,USA
Vintage Delta Rockwell D-101 Shaper Cutter with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. It measures 1 3/4 inches long by 1 inch wide ... moreand is marked- D-101" It's in nice condition.
$
40
Buy It Now
$6.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
$
13
4d 4h 40m 0s
0 bids
$4.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
Vintage Delta Rockwell D-102 Shaper Cutter with 1/2" Bore- High Speed Steel- Made in U.S.A. No Reserve. It measures 1 3/4 inches long by 1 inch wide ... moreand is marked- D-102" It's in nice condition.
$
25.35
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
18.2
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
14
Buy It Now
Free Shipping
Condition: Used
Location: Pottstown,PA,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
54.95
Buy It Now
$0 Shipping
Condition: New
Location: Palm Harbor,FL,USA
$
55
Buy It Now
$15.05 Shipping
Condition: Used
Location: Northfield,MN,USA
$
89.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bath,ME,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
10.3
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
Delta Rockwell 3/4" spindle for pre 2002 heavy duty shapers in excellent condition. Includes original washer and nut. This spindle was used very ... morelittle. Most work on the machine was done with a 1/2" spindle. Pictures will be added tomorrow.
$
49.99
Buy It Now
$0 Shipping
Condition: New
Location: Hammond,LA,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
36
Buy It Now
$5.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
$
8.75
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
18
Buy It Now
Free Shipping
Condition: New
Location: Pottstown,PA,USA
$
36
Buy It Now
$5.5 Shipping
Condition: Used
Location: Algonquin,IL,USA
$
219
Buy It Now
$0 Shipping
Condition: New
Location: Belleville,WI,USA
$
18.5
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
54.95
Buy It Now
$0 Shipping
Condition: New
Location: Bath,ME,USA
$
68.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bath,ME,USA
1 2 3
 In 

Past Items  
 
D-196& D-197 HSS 1/2" Bore Good used condition I have many cutters listed for sale. Shipping for one cutter is $5.80. All additional cutters purchased will ship for free. WI Residents add 5.6% Sales Tax
Vintage Delta. Pat. Jan. 10 1933 stamped on all four posts.Doesn,t say delta on mitre guage, mitre guage pat. 1934. This was stored for years and had light rust. I wire brushed most of it and lightly oiled, as you can see there are rust stains, slight pitting on bottom. This is fully functional, no broken parts, probably was used lightly or never used as the front of the mitre guage has no wear on it.
Delta/Rockwell? Shaper Cutter Spindle. 5/16" spindle. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/ Rockwell Moulding Shaper Cutter Knives! Catalog# 252 Style"C" Set of three knives.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Shaper cutter# D-121. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A female sash cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Shaper cutter# D-138. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Shaper cutter# D-139. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Shaper cutter# D-136. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A cove and bead moulding RH. cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
THIS SPINDLE FITS DELTA 2 AND 3hp HEAVY DUTY SHAPER. 2 1/4" X 3 1/2" BEARING SLEEVE. LONG SPINDLE 4" UNDER LOCK NUT, 2 3/4" PULLEY. THE SPINDLE AND BEARING SLIDES INTO THE BEARING HOSING ON THE SHAPER. BEARINGS ARE SMOOTH AND PERFECT WORKING CONDITION. WILL SHIP TO LOWER 48 ONLY) THANKS FOR LOOKING TAKE A LOOK AT MY OTHER ITEMS
Delta/Rockwell Shaper cutter# D-108. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e045975d0-0xf5-
NOTE THIS UNIT SHIPS WITH ONLY ONE CAST IRON EXTENSION WING FOR THE TABLE. TWO ARE PICTURED BUT IT SHIPS WITH ONLY ONE NICE ROCKWELL 43-340 SHAPER. WITH ONE TABLE EXTENSION WING, AND FENCE. WORKS GREAT. 3 PHASE 230V 013-04-11-MIHN PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ... moreANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid licen
Machine For Sale Powermatic Model 26 Spindle Shaper with 5 HP Motor and 4-Roll Delta Power Feed Stock# 54017 Condition: Used Tested: Tested Brand: Powermatic Model: 26 Serial: 8626165 Year: N/A Weight: N/A Shipping Dimensions: N/A Additional Details: Powermatic Model 26 Spindle Shaper with 1” dia. X 4 ½” long threaded spindle. 5HP, 208/230/460 volt, 3PH motor, 2-speed pulley, magnetic starter, reversing switch, adj. fence, guard and 4” dia. dust chute. Also incl. 4-roll Delta Universal Power Feed with stand and fladder. 25-KW, 4” dia. X 6” dia. spindle sander. 28” x 30” cast table, machine wired for 230/60/3. Cord and plug SN: 8626165 If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. alt=" border="5" ... morealt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" Please Read Before Buying Item* Preliminary specifications are subject to verification and should be used as a guide only. The Equipment Hub. LLC cannot guarantee the accuracy of the specifications and/or description given of the condition of machine Terms Of Sale Seller is selling the assets set forth on an as is. Where is basis and seller disclaims all warranties, representations and guarantees whether expressed or implied. Seller makes no representation or warranty as to the operability, merchantability or fitness for any particular purpose. The buyer is always responsible for verifying the condition and operational functions. Upon reasonable notice to The Equipment Hub the purchaser shall have the right to inspect the equipment prior to purchase. Payment Information All Payments are to be made in United States dollars. We accept Visa. Master Card, Discover, Paypal, Bank Wire Transfers and Checks. Payment in full must be received prior to shipping. If payment is not received within 7 days
Used cast iron extension wing from a Delta Rockwell Unisaw Mod. 34-450 Will also fit the H.D. shapers. Great condition. 8" x 27" Check my other listings for more Unisaw parts. I'm parting out a complete saw that is in very good condition. Pay Pal Please.
Message to dmitchell: I couldn't answer your question because you included an email address in your message. Call me. number at bottom) $65.00 Shipping is to USA 48 states only. No charge for pick up in Vista CA 92083) This auction is for a Delta unisaw or shaper PAIR of table extensions from a vintage Delta unisaw. No chips. Cracks, or other damage. The photos below are the ones to be sold. Thanks for looking!
Shipping to USA 48 states only. Vintage Delta Rockwell Milwaukee unisaw or shaper CAST-IRON BASE no damage. Just a little rust.
Spindle Cartridge with pulley for Delta/Rockwell LD shaper The LD shaper is the small spindle shaper that uses 1/2" and 5/16" interchangeable spindles Bearings feel smooth Cartridge was removed from a working machine a year or so ago PayPal only US shipping only Please ask all questions before bidding Payment due in 3 days from end of auction or item will be relisted
Locking Lever for Delta/Rockwell LD Shaper Complete Locks the height of the cartridge PayPal only US shipping only Please ask all questions before bidding Payment due in 3 days from end of auction or item will be relisted
Vintage Delta/Rockwell Shaper cutter fence. Catalog# 982. In great condition! Old model notice no plastic handles or knobs! All original parts even the fence boards. Fence is fully adjustable. Both halves adjust independently. Also adjusts endwise so opening may be made as small as required for your cutters. Will be shipped disassembled. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta Rockwell 3" Diameter Shaper Table Insert for Delta Shapers Came from a Delta Rockwell 43-120 Light Duty Shaper. It fIts in the cast iron table top around the spindle. Part number SR-237. It measures 3" in diameter. It's in excellent condition. Please see pictures for details. We accept PayPal. Item to be shipped via USPS Parcel Post or FedEx Ground
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Lot Of 2- Yates American J45 Shaper. Delta Disc Sander w 12" Disc Item Description: This is a Lot Of 2- Yates American J45 Shaper with 20" round plate. Delta Disc Sander w 12" Disc Note Buyer will ... morebe responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Oakland. CA 94601 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33031) nbsp, nbsp, Model: J45, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Features: unknown, nbsp, nbsp, Date of Manufacture: unknown, nbsp, nbsp, Size: Shaper 24 24 47 Disc Sander 17 24 45, nbsp, nbsp, Color: gray, nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, Pickup Logistics and Handling: Forklift and loading dock may be available on site t
This Delta/Rockwell spindle is for the shapers made in 1940s to 1970s. Shaper# 43-205. Combine shipping OK on my other Items.
This is a Rockwell D- 126 shaper cutter for 1/2" spindle.687" high. Excellent used. Please look at the pictures closely. They are part of the description. Please E-Mail us with any questions or concerns BEFORE bidding. FREE SHIPPING LOWER 48 ONLY! INTERNATIONAL BUYERS WILL PAY SHIPPING& HANDLING FEES! Thank you for looking.Please check out our other items on e-bay and please add us to your favorites list. PLEASE WAIT FOR YOUR INVOICE. YOUR FEEDBACK IS IMPORTANT. PLEASE LEAVE IT. EXCELLENCE in COSTOMER SERVICE& COMMUNICATION FEEDBACK IS OUR# 1 GOAL. If for any reason you feel we have not earned this type of feedback PLEASE e-mail us and give us the opportunity to earn it. We ALWAYS give positive feedback. Thank you for taking the time too read this and.WE HOPE YOU HAVE A GREAT DAY!
This is a Rockwell D-201 shaper cutter for 1/2" spindle. 1/2" high MINT used. Please look at the pictures closely. They are part of the description. Please E-Mail us with any questions or concerns BEFORE bidding. FREE SHIPPING LOWER 48 ONLY! INTERNATIONAL BUYERS WILL PAY SHIPPING& HANDLING FEES! Thank you for looking.Please check out our other items on e-bay and please add us to your favorites list. PLEASE WAIT FOR YOUR INVOICE. YOUR FEEDBACK IS IMPORTANT. PLEASE LEAVE IT. EXCELLENCE in COSTOMER SERVICE& COMMUNICATION FEEDBACK IS OUR# 1 GOAL. If for any reason you feel we have not earned this type of feedback PLEASE e-mail us and give us the opportunity to earn it. We ALWAYS give positive feedback. Thank you for taking the time too read this and.WE HOPE YOU HAVE A GREAT DAY!
THIS SALE IS FOR A MOUNTING PART FOR A SHAPER SAFTY RING GUARD. SHIPPING $ 5.80 TO THE LOWER 48 UNITED STATES BY USPS PRIOIRTY MAIL.
Welcome to National Equipment Sales! 71-1/2" Delta Rockwell Router Shaper with Wooden Table Catalog# 43-430 Stock# R001 Dimensions: Metal Table: 20" x 27" x 35" Wood Table: 31-1/2" x 71-1/2" x 35" The Spindle is 3/4" 230/460 Volt This Rockwell Shaper is 3 Phase This Rockwell Shaper has 3 Horsepower This Shaper is in Good Condition Call Kyle With Any Questions@ 815) 670 6400 STOCK# R001 WE WILL HELP WITH SHIPPING. THERE IS NO EXTRA CHARGE FOR PREPPING OR LOADING. We make every effort to accurately describe each item we sell and to give buyers the information needed to bid with confidence. We Accept ALL REAL Offers! Questions? Call Kyle(815) 670-6400 About National Equipment Sales We are a Chicago area company with over 10 year’s experience. Our mission is simple– we are dedicated to providing our clients ... morewith personalized service and innovative design solutions using premiere products. With our accessible 30.000 sq ft warehouse west of Chicago, we are one of a select number of firms that offer a one-stop experience to clients for quick ship custom lab casework and fume hoods. We carry only the highest quality manufacturers with the widest range of styles. Our experienced industrial equipment and material handling specialists are personally available at every stage of your project, contact us with all questions and inquiries. Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image Click to view supersized image
DELTA SHAPER MODEL 43-373. IN EXCELLENT SHAPE. TWO SPEED 7000 AND 10.000 RPM. 3 HORESPOWER 220 VOLTS 3 PH. SERIAL#93618743. 325. QUESTIONS CALL JUSTIN 619-253-6499. YOU ONLY GET WHAT IS PICTURED AND DESCRIBED IN AD AND NOTHING ELSE. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $50.00 PACKAGING COST FOR LARGE ITEMS THAT NEED PALLETIZING OR SPECIAL PACKAGING. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. IF I CAN I TEST EVERYTHING BEFORE SHIPPING TO MAKE SURE IT WORKS BEFORE YOU GET IT. IF IT DOESN'T WORK WHEN YOU GET IT. IT IS YOUR RESPONSIBILITY TO ... moreREPORT IT TO THE SHIPPING COMPANY AND I WILL NOT BE HELD RESPONSIBLE IF YOU DO NOT. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR C
Universal Listing Code- Mark Delta X5 Spindle Shaper General Info: Stock# 413535 Condition: Used Tested: Item has been tested Brand: Delta Model: X5 Serial: N/A Year: N/A Weight(Approximate) N/A Machinery details: Spindle Shaper with 5HP 220/1Ph Motor-2 Speed(7.000 and 10,000 RPM) 3/4" Diameter x 3-1/2" spindle-micro adjustment fence-cutter guard-3" diameter dust outlet-27" x 40" cast table with T slot-Cord and plug Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084
Nice delta carbide tip shaper cutter set any questions feel free to email me thanks for looking and good luck bidding Posted with
Delta Rockwell Shaper Fence Bolts These are the fence bolts for all Delta Rockwell light duty and heavy duty shapers. They are used to securely hold down the shaper fence to the table. They are in excellent condition. Please see the pictures for details. We accept PayPal. Item to be shipped via USPS Priority Mail- Please include your phone number. NOTE: Items are all shipped on the Friday after receipt of payment. Check out my other items! 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e4043170c-0x100-
Up for auction is a used power switch box that can be used with a variety of vintage Delta/Rockwell stationary power tools. This is the inner box that is 1 part of a 4 part switch/box/cover assembly that mounts inside the tool's cabinet. This box and the other parts of the system are becoming scare and are necessary for authentic restorations. Cabinet mounting screws are included. Thanks for looking. `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e409460c4-0xf2-
Delta 43-375 Single Spindle Shaper General Info: Stock# 413513 Condition: Used Tested: Yes Brand: Delta Model: 43-375 Serial: 99D89317 Year: N/A Shipping Weight: 385 lbs Shipping Dimensions: 48" L x 40" W x 48" H Specifications: 7000& 10000 RPM Speeds. 230V/1Ph, 3HP Motor, 3" Spindle Travel distance. 3/4" Spindle Additional Info: We are not trained mechanics or specialists of the following machinery listed and therefore can't guarantee full functionality or specs of the machine. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G ... moreN Royal Atlanta Dr. Tucker. GA 30084 Visit Us on the Web at
Delta/Rockwell Shaper cutter# D-124. Cutter has 1/2" bore and is HSS. Vintage! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Craftsman? Shaper hold downs. The hold downs as seen in the photos. A must when shaping long pieces of wood. In great condition. Selling as used but I see no signs of use at all! Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta/Rockwell Shaper cutter# D-123. This is a rare cutter. Has 1/2" bore and is HSS. Vintage! A cabinet R.H. male cutter. See other auction for the mate.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e4ea20f4d-0xf5-
FREE DELIVERY BETWEEN SAN DIEGO AND CHICAGO ALONG I-8. I-40, I-44, I-55, I-80 I will be traveling that route next week and will drop it off anywhere near the interstate highways listed. OTHERWISE- $65.00 Shipping is to USA 48 states only. No charge for pick up in Vista CA 92083) This auction is for a Delta unisaw or shaper PAIR of table extensions from a vintage Delta unisaw. No chips. Cracks, or other damage. The photos below are the ones to be sold. Thanks for looking!
One pair of Davis and Wells shaper fences. The fences are in very good condition with no cracks or chips. There are a few casting imperfections that appear as dark spots on the photos but they are due to the factory casting and finishing process not wear or damage to the fences. Each individual fence measures 9-7/8" L x 2-1/8" W x 3-1/4" H. The distance between each slot is 3-13/16" center to center with each slot being 1-3/4" L and 7/16" W.
Delta/Rockwell Shaper Cutter Set. Catalog# 980. In great condition. I do not think most of these cutters ever seen wood! 24- Cutters 5/16" bore, 8- Shaper collars, delta wrench, and a 1/2" X 5/16" spindle. You can use them on your router table also! A must have set for the collector.Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Delta Shaper Profile Blade Set
Delta Cat. No. 43-454 Single Spindle Shaper General Info: Stock# 4134575 Condition: Used Tested: Yes. Unit is in good working condition Brand: Delta Model: 43-454 Serial: 03C22389 Year: N/A Shipping Weight: N/A Shipping Dimensions: N/A Specifications: Motor: 5HP/ 230V/ 1Ph-2 Speed(7.000& 10,000 RPM) 3/4" Diameter x 3-1/2" Spindle-Micro adjustment fence Additional Information: It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 Visit Us on the Web at
SHAPER CUTTER BITS WITH ARBOR– DELTA(1) AND KLINE(5) CONDITION: USED– Normal Wear and Tear– See Pictures Good Working Condition: DELTA: D-131 KLINE KL-21 AND 22(1/4 inch) KL-40 KL-28 KL-29 Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Please e-mail with questions Free Shipping- US Only
Rockwell Delta SHAPER Model 163-38. 1HP. Tabletop is 27-1/4" x 28" Spindle is 3/4" x 4" If you have any Questions please let us know. Advertised as pick up only but we are happy to work with you on shipping. Good Luck and thank you very much! Please see more of our inventory here And http:picasaweb.google.com/pleasantstmachinery I will ship anywhere in the US as long as buyer sets up freight PLEASE READ THE FOLLOWING CAREFULLY Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders ... moreunless you have state tax ID. There is a $5.00 handling fee on all items. An additional $25/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. Many of our customers have used the following trucking/freight companies for their truck/freight needs: Small Business Transportation at 888-368-6022 x218(gil) or Freight Quote at 888-595-6298 x1250 Bob. All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to either of these or any other selected trucking/freight companies. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit
Delta collar tightening block for shaper PLEASE READ THE FOLLOWING CAREFULLY Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on all items. An additional $25/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning ... morebidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. Many of our customers have used the following trucking/freight companies for their truck/freight needs: Small Business Transportation at 888-368-6022 x218(gil) or Freight Quote at 888-595-6298 x1250 Bob. All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to either of these or any other selected trucking/freight companies. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold"AS IS. AS PICTURED” Feel free to Contact Me. You may e-mail me at the above address or call me at(815) 299-7625 Monday through Friday after 3:30pm CST. I will answer your e-mails or calls as soon as possible. On Sep-24-12 at 17:39:20 PDT. Seller added the following information: ON SHIPPING! uShip is the first and la
This is a early Delta Milwaukee three knife shaper cutter head. It is No. 1343 later sold as No. 43-344. It is in very good condition with only a little tarnish to show for many years of storage and a little use. It has the original 3/4-1/2" bushing and four sets of cutters. The set in the head is set"B" or No. 251 and is used. The other three sets are NOS and are"A" or No. 250. C" or No. 252, and"D" or No. 253 they are in their original boxes and set"D" is still wrapped in wax paper and grease. This is a nice working head for your shaper and a great set for the vintage Delta collectors. I ship fast usually the first business day after payment. I love to combine shipping so check out my other listings of quality tools. You pay only the actual combined shipping cost. I try to make accurate ... moredescriptions with both words and pictures. If after receiving a item you feel that the listing was inaccurate, please return it for a refund. Thank you!
This listing is for a Delta Shaper Fence. Measures 10" in length. 4" wide 3" x 1/2" slots Cast on back: 25226 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. ... moreAll items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact
Used lock knob from a Delta Rockwell Unisaw Mod. 34-450 will also fit the H.D. shapers. Good condition. See pics for details. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
UP FOR AUCTION I HAVE A DELTA MILWAUKEE SHAPER CUTTERS AND COLLAR SET 1182.IT COMES WITH ORIGINAL WOOD BOX AND PAPER BOX.THIS WOULD MAKE A GREAT GIFT FOR THAT SPECIAL WOOD WORKER OR A GREAT ADDITION TO YOUR PRIVATE COLLECTION.THANKS FOR LOOKING AND HAPPY EBAYING. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e8c37a1d9-0x101-
Being offered for sale is a: WEAVER- TENON HOLD DOWN JIG. This jig is normally used on a shaper to hold boards so that the ends of the board can be milled by the shaper cutter(cope end) to fit into the stile. These are a very rare item to be listed for sale on e-bay. They are manufactured by Weaver Mfg. and can be viewed at their web site: You can also note they carry a price of $295.00. So I think my buy-it-now of $150.00 is a fair price.
Model# 43780 Beautiful condition.Exceptionally versatile.Capable of very fine micro adjustments. Can handle a verity of spindles. Comes with one standard spindle. Payment must be made in full before item is picked up. Requires a $500.00 deposit within 24 hours of end of auction. Pick up should be within 2 weeks. Local pickup is encouraged. Item is currently setting on a skid.
Hi. This lot includes 5 original delta rockwell shaper spindle cutters for a 1/2" bore shaper spindle. The cutter in the bottom of the photo with the plain box marked KL may not be a delta mfg. The door lip cutter looks unused. Thanks for looking
Powermatic Model 26 Professional Shaper This Includes: Powermatic Model 26 Shaper 1" Diameter x 4 1/2" Tall Spindle 3 Phase 208/220/440 Volt 3 Hp Baldor Motor 30" x 28" Steel Table 28" x 8 1/2" Additional Steel Side Table Adjustable Fence 4" Dust Outlet Ready For Hose Serial#726188 Shipping Weight 415 Lbs on a 38" x 37" Pallet x 47" Tall Condition: This was taken out of a local cabinet shop that shut down. This shaper was tested and ran before it was removed. It is in overall good working condition, with some scrapes on stand. Shipping: This will ship freight because of size and weight. Please contact us for a shipping quote it may be cheaper than you think. It will need to be delivered to a location with a loading dock or forklift, or it can be delivered to a local shipping center and picked ... moreup. Payment: We Accept Paypal Returns: We do accept returns for 14 days. Buyer pays shipping both ways and a 15% restock fee. Sales Tax: Washington State sales tax of 7.8% will be charged when item is shipped to Washington Only About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions. We value your business!
Slightly used D-101(09-101) 5/16 cove 3/8 bead cutter. Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
Slightly used D-120(09-120) Ogee cutter. Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
Slightly used Delta Rockwell Shaper 1/2" cove. 5/16" qt. rd. D-100(09-100) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
Never used Delta Rockwell Shaper panel raising cutter D-214(09-214) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
Never used 3/4" bead Delta Rockwell Shaper cutter D-238(09-238) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
Slightly used 1/2" bead Delta Rockwell Shaper cutter D-202(09-202) Combined shipping offered on this item. Message me if you want to continue shopping and I will hold your invoice. Check out my other items! Be sure to add me to your favorites list!
Excellent Master Carpenter/ Furniture Maker Estate Collection or Lot of roughly 28 shaper cutter or moulding heads. Boxed shaper collars, boxed specialty drill bits, boxed collet chuck(missing one of the jaws) and so much more, most in near absolutely mint condition, just needing a good cleaning or oiling This fantastic and huge woodworking tool set was formerly the proud possession of a local master carpenter. Who throughout his life was quite well known for many things, including more recently being one of the leading finish carpenters for the esteemed Eldred Wheeler Company, and was truly a pioneer in his work in tiger oak, maple, and burled walnut too. This set also includes a few that are carbide tipped and would honestly cost you a small fortune to replace retail today, likely well over $1000 or more. Everything pictured is included ... moreand free insured shipping in the U.S.A. is included as well! Less than $10 each for the shaper cutter heads to your door, and everything else is included too! Please check the pictures very carefully for exactly what's included. And for their exact age and condition, they're nice! Thank you for looking and Insured Priority Mail Shipping is Free in the U.S.A. Just listed and now with a lower price! This collection of top of the line carpentry tools will simply not last at this price. Make them yours!
Delta Rockwell Model JT2 Heavy Duty Shaper HAS FORWARD AND REVERSE GEARS ELECTRIC MOTOR 220/440V 3 PHASE MODEL 87-611 SN:P66P2A18 3450 RPM INCLUDES WOODEN ATTACHMENT/OUTLET TO DUST COLLECTOR TABLE TOP DIMENSIONS ARE 27x27 SQUARE!IF YOU ARE INTERESTED PLEASE MESSAGE ME YOUR ADDRESS INCLUDING ZIP AND I WILL GET YOU A FREIGHT QUOTE! 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ee270c8f2-0x106-
Delta Carbide Shaper Cutter No. 45-984 15 Degree Face Cut Horizontal Panel Raising Shaper Cutter in original box with packing. Cutter used once for a panel. See other cutters and shaper I have listed. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13eef242fad-0x105-
Delta Carbide Shaper Cutter No. 43-094 Ogee Style Cabinet Set Shaper Cutter in original box with packing. Cutter set is used maybe 2 or 3 times. Small chip on one wing on top corner(see photo) Should not effect finish cut of molding. Should come out if resharpened. There is a lot of thick carbide on these Delta cutters. This cutter set was never sharpened. See other cutters and shaper I have listed.
Delta Carbide Shaper Cutter No. 43-057 V-90 degree Shaper Cutter in original box with packing. Used cutter once. See other cutters and shaper I have listed.
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ lt DELTA RS15 7.5hp SHAPER w/ POWERFEED“CLEARANCE ITEM” This is not the perfect RS 15. However it still is a good machine despite it’s flaws. 7.5 hp 230/ 460V main motor. 1 1/4″ main spindle with less than 1/1000th run out. You also get a 3/4″ spindle. Both spindles include spacers. Nuts, and a spindle wrench. Italian made Delta 1 hp powerfeed with good wheels. Working foot brake. 5 spindle speeds of 2,800, 4,500, 6,000, 8,000, and 10,000 RPM. The powerfeed has a repair on the stand. The shaper has a crack running down the front of the table that has been brazed and runs 8 3/4″ away from the fence. For these 2 reasons it is a clearance item and does not have a warranty or return privilages. We do guarantee the machine is in working order but it is not defect free. Please view ... morepictures and watch the video to determine if this is the right machine for you. Terms& Conditions: 1. Please ask all questions before bidding. 2. Winning bidder will pay actual freight charges. We do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10.000 of coverage 3. Please call(630-229-6705) or email( info@360degreemachinery.com) us for full freight options. There will be $75 custom skidding/crating fee if shipping common carrier. 4. Illinois transactions must add 7.25% sales tax unless tax exempt. 5. Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with
Flat belt type shaper motor pulley. A little rust from sitting. 7/8 shaft. 6 3/8 5 3/4 two speed. This came from a 3 hp heavy duty delta shaper. Free shipping to the US
Pair of unisaw or shaper hand wheels. Will ship anywhere in the US for 12 dollars.
craftsman tablesaw sander or shaper mitre gauge#4. very good condition Bar is ~17.5"L x 3/4"w x 3/8" d Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
Delta Wood Shaper Serial# 8/D14223 Cat: 45-422 Volt: 110 Ph: 1 Amp: 14.4 Motor Information: 1 HP motor is reversible with toggle switch RPM: 3450 V: 115/230 Delta# 62/003-W387 PICK UP IN ROXBURY WE WILL NOT SHIP IT TO YOU
Delta tablesaw sander or shaper t slot mitre gauge#6. very good condition Bar is ~12.5"L with a t slot bar that is5/8" on top and 3/4" on bottom and 1/4" deep Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
Vintage tablesaw sander or shaper mitre gauge#5. very good condition Bar is ~16"L x 1"w x 3/8" d some pitting on the bar Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
Small sander or shaper mitre gauge#2. excellent condition Bar is ~8"L x 3/4"w x 3/8" d Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
SHAPER PARTS. DON'T KNOW WHAT MACHINE THESE CAME OFF OF. FENCE PART 252-37 SPINDLE PART 252-6 BRACKET PART 252-18 CAST ALUMINUM PARTS. SPINDLE SPINS FREELY AND IS TIGHT. COULD BE DELTA OR CRAFTSMAN BUT NOT SURE. THE PART NUMBERS ARE ON THE PARTS. WHAT YOU SEE IS WHAT YOU GET. SPEEDY PRIORITY SHIPPING.
Manufacturer: Rockwell Model: 43-350 Heavy Duty Wood Shaper Serial: KB6493 Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Appears to be 3 PH but please view the picture for confirmation. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS ... moreSCHOOL IS BEING DEMOLISHED ON JUNE 24th AND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items are being sold for Holland Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
This Shaper must be picked up in Wappingers Falls. NY 12590. 1.5 hours north of New York City. Please let me know if you have any questions! A high-speed production unit that handles five spindle sizes-1⁄2 to 1" Because of the wide range of shaper cutters it will accommodate. There’s practically no limit to the variety of cuts this Delta 2-Speed Shaper will produce. It will handle 1⁄ 2" 3⁄4" and 1" standard spindles. A 1⁄ 2" stub spindle, plus an extra long 3⁄ 4" spindle with 43⁄ 8" capacity under the nut. And, because it has two spindle speeds—7.000 and 10.000 rpm—it will handle practically any shaping operation. Including panel raising. Because of its great shaping versatility. This popular machine is well suited for cabinet shops. Furniture factories, specialty shops. School shops, sash and door companies ... moreand similar installations.
SHAPER CUTTER BITS 1/2 INCH ARBOR KLINE KL-28 CONDITION: USED– Normal Wear and Tear– See Pictures Good Working Condition: Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Please e-mail with questions Will Combine shipping
I have 28 used shaper cutters for sale. All are in good condition. Many look to have been used very little. There are a variety of profiles and it would make a great collection. 1/2" bore. Everything from a 1" strait cutter to round overs and various complex profiles. Email with any specific questions about the cutters. PayPal only. No returns.
Fence appears to have had very little use. See pictures of actual item. Item sold as is where is. No warranty. No guarantee. What you see in pictures is what you get. NO RETURNS, NO REFUNDS. Posted with
Delta Carbide Shaper Cutter No. 45-987 Horizontal Panel Raising Shaper Cutter in original box with packing. I don't think cutter was ever used. See other cutters and shaper I have listed.
Delta Carbide Shaper Cutter No. 45-931 Horizontal Panel Raising Shaper Cutter in original box with packing. Cutter used once. See other cutters and shaper I have listed.
Delta Carbide Shaper Cutter No. 45-986 Horizontal Panel Raising Shaper Cutter in original box with packing. Cutter used once. Great condition. See other cutters and shaper I have listed.
Delta Carbide Shaper Cutter No. 43-045 Convex Style Cabinet Set Shaper Cutter in original box with packing. Cutter set is used for one set of kitchen cabinet doors. Excellent Condition There is a lot of thick carbide on these Delta cutters. This cutter set was never sharpened. See other cutters and shaper I have listed.
This is the stuff from the bottom drawer of the shaper cutter cabinet- contains wrenches. Shims, bushings, spacers, a spindle, shafts, washers, locking nuts and what-have-you. Not sure what all of it is but I am sure some of it would be of use to those of you who are using an old Delta/Rockwell Shaper. I have several cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A new Leitz cutter and a lot of 5/16" bore cutters, so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information: On Jun-16-13 at 17:53:18 PDT. Seller added the following information: I mistakenly listed this item with no returns. I will accept returns on this item within ... more14 days- money back- buyer pays return shipping.
Set of 8 Vintage Delta Rockwell Three Wing Shaper Cutters- 5/16" bore- cutters are used but look to be in GOOD USABLE CONDITION. I have several other cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-124 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-130 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-103 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-125 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-131 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-126 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-107 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#43-959 for Delta/Rockwell Shaper 3/4" bore with 1/2" bushing- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information: On Jun-16-13 at 17:54:02 PDT. Seller added the following information: I mistakenly listed this item with no returns. I will accept returns on this item within 14 days- money back- buyer pays return shipping.
Vintage Cutter#43-902 for Delta/Rockwell Shaper 3/4" bore with 1/2" bushing- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#43-910 for Delta/Rockwell Shaper 3/4" bore with 1/2" bushing- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#43-913 for Delta/Rockwell Shaper 3/4" bore with 1/2" bushing- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#43-906 for Delta/Rockwell Shaper 3/4" bore with 1/2" bushing- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#43-909 for Delta/Rockwell Shaper 3/4" bore with 1/2" bushing- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including several 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-214 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-104 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information:
Vintage Cutter#D-106 for Delta/Rockwell Shaper 1/2" bore- cutter is in GOOD USED CONDITION. I have several cutters and accessories for a shaper cutter including severa 1/2" and 3/4" bore. A set of 8- 5/16" bore, a new Leitz cutter and a mixed lot of wrenches, shims, spacers and what-have-you for an old Delta/ Rockwell Shaper so check my seller's list Free Shipping in the United States. I will ship only to address on file with ebay/ paypal. I only accept Paypal for payment. On Aug-17-12 at 14:32:23 PDT. Seller added the following information: