In 
 
Order by: 
Available to: 
Price: 
 - 
$
4,000
5d 2h 19m 24s
0 bids
$0 Shipping
Condition: Used
Location: Savannah,NY,USA
$
1,974.38
5d 19h 59m 18s
0 bids
Free Shipping
Condition: Used
Location: United Kingdom
$
43.44
4d 8h 14m 10s
0 bids
Free Shipping
Condition: Used
Location: United Kingdom
Welcome to our auction. For over 45 years Pruitt Machinery has proudly been an accomplished supplier of New and Used machinery and parts to the woodworking ... moreindustry. UP FOR AUCTION One Rye Shaper Head. This is a C2 Shaper head with a 4" cutting diameter and a 2 1/4" cutting face. It will fit a 1 1/4" inch shaft. 9000RPM Max As Is SHIPPING AND TERMS We normally ship UPS. You may pick your item up at any time after payment at our place of business. Please let us know in the initial contact if you desire to pick your item up and save on the shipping. We are open 8:30am to 5 PM weekdays. Pruitt Machinery 25 23rd St NW Hickory NC 28601(828) 328-2641 RETURNS All returns accepted! The buyer should contact us within 14 Days after receiving the item if you wish to return the item. We will provide you with a RA number to include in the packaging. The item must be returned in the same condition as it was shipped otherwise there may be charges. Your refund will be given as Money Back. The return shipping shall be paid by the buyer. The buyer has 14 days to return the item once given the RA number. After the item is received and inspected the refund will be released back to the buyer. PAYMENT We accept a wide variety of payments. The fastest ways of payment are. PayPal Credit Cards through PayPal Credit Cards through Pruitt Machinery(828) 328-2641 Slower methods of payment Postal money orders Cashiers Check Personal Check All postal money orders or checks will be checked for fraud and must clear before we will ship your item so please allow up to 2 weeks after we receive your payment for the item to ship. FEEDBACK We will provide feedback after the transaction and hope you will do the same. We strive for happy customers so please contact us if you have any problems before leaving negative feedback. We will provide you with a positive solution to your problem. Pruitt Machinery 25 23rd St NW Hickory NC 28601(828) 328-2641
$
19,499
Buy It Now
Free Shipping
Condition: Used
Location: Bristol,IN,USA
$
1,632.48
Buy It Now
$150 Shipping
Condition: New
Location: Beaver Falls,PA,USA
$
100.17
Buy It Now
$8 Shipping
Condition: New – Open box
Location: Newnan,GA,USA
$
23.71
Buy It Now
$7 Shipping
Condition: Used
Location: Newnan,GA,USA
$
30.71
Buy It Now
$8 Shipping
Condition: Used
Location: Newnan,GA,USA
Good condition. Arbor has 5/8" bore and 5/8" shaft. Please review photos and email any questions(7)
$
37.11
Buy It Now
$8 Shipping
Condition: Used
Location: Newnan,GA,USA
$
150
Buy It Now
Free Shipping
Condition: Used
Location: Raymond,IL,USA
$
2,244.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
This Ships Direct From The Factory. Please Allow 8 to 10 Days Delivery DOES NOT SHIP TO CALIFORNIA. LOUISIANA, MISSISSIPPI, TENNESSEE, MARYLAND, CONNECTICUT, ... moreRHODE ISLAND, OR MASSACHUSETTS W1812 SHOP FOX® Planer Moulder with Stand Description: This next generation Planer/ Moulder features precision ground cast iron wings for greater work support. T-slots for easy guide rail adjustment, pedestal mounted switch, improved chip clearance, one-piece enclosed stand and variable speed control for unsurpassed planing and moulding capability. Open end design allows you to make elliptical mouldings with the optional elliptical jig. If you make your own mouldings and frames, you need this machine! Specifications: Motor: 2HP. 240V, single-phase, TEFC, 3450 RPM, Amps: 10.8, Power transfer: V-belt, Overall dimensions: 36-1/4"L x 22"W x 34-1/2"H, Maximum planing width: 7" Maximum planing depth: 1/8" Maximum planing height: 7-1/2" Maximum profile width: 6-3/4" Maximum profile depth: 3/4" Minimum stock thickness: 1/4" Minimum stock length: 9" 2 HSS knives 7-1/8"L x 1-1/2"W x 1/4"T, Number of cuts per minute: 14.000, Number of cuts per inch: 64-260, Cutterhead type: square, Cutterhead diameter: 1-1/4" Cutterhead speed: 7000 PRM, Table dimensions: 14-1/8"L x 10"W x 7/16"T, Extension wing dimensions: 11"L x 8-9/16"W x 2-3/8"T, Floor to table height: 30-3/8" Dust port: 4" 1) Feed speed: 0- 18 FPM, Precision-ground cast iron infeed and outfeed extension wings, Dovetailed way for cutterhead housing with precision gib adjustments, Pedestal-mounted control switch with variable speed control, Power feed motor: 1/4 HP. 180VDC, 1A, Power feed motor speed: 0-55 RPM, Variable speed power feed with chain drive power transfer, Patented. Patents Pending,
$
1,299.99
Buy It Now
$0 Shipping
Condition: New
Location: La Vergne,TN,USA
CPO Model 708524. List Price: $1.299.99, CPO Price: $1.119.99, You save: $180(14% Availability: In Stock, Cast iron table and base provide strength and ... morereduce vibration during use, Four precision-ground column design feature adds stability when raising and lowering the table, Three cutter head design produces a superior finish in either application, Two speed gear box has feed rates set for optimum planing and molding results, Molding cutter head accommodates over 40 standard molding cutter sets. Most 2-in or smaller heads can be installed without removing the planing knives to save you setup time, In feed and out feed rollers are adjustable and rubber-coated to support your work piece without marring the wood, Top-mounted height adjustment handle is easy to use for quick table height changes, Totally enclosed fan-cooled 1-1/2 HP motor uses two matched V-belts to deliver smooth. Consistent power to the cutter head, Exclusive angled 4-in dust port keeps the dust hose out of the way while providing efficient chip and dust removal, Built-in lockable casters add support and stability to the machine while in use, Feed Rate for Molding/ Planing, 10 FPM/ 20 FPM, Cutter Head Speed, 4.500 RPM, Number of Knives, 3, Cutter Head Diameter, 2-9/16-in, Style, Closed Stand, Motor, 1-1/2 HP. 1 Ph, 115/230V, Maximum Planing Width, 13-in, Minimum Planing Length, 14-in, Weight, 202 lbs. Maximum Planing Thickness, 6-1/8-in, Pre-Wired, 115V, Cuts per Minute, 13.500 CPM, Maximum Full Width Depth of Cut, 1/16-in, 13-in Closed Stand Planer/Molder Combination Machine- 708524, Knife Setting Gauge for Planing, Knife Setting Gauge for Molding, Adjustment Tools, 5-Year, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are desig
$
10,699
Buy It Now
$0 Shipping
Condition: New
Location: Hammond,LA,USA
$
190
Buy It Now
Free Shipping
Condition: Used
Location: Raymond,IL,USA
$
270.99
Buy It Now
$0 Shipping
Condition: New
Location: Baltimore,MD,USA
Why wait for Byrd to make one? We have them in stock and can ship within the hour! Woodworkers know that a shear cut is far better than a straight cut. ... moreYou also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple. It is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. Call Dave at 410-465-6209 for more details or to add inserts to your order! 3"D x 3"W x 1-1/4"Bore Shelix with matching rub collar oellasawandtool.com Major Diameter 3" Cutting Edge Length 3" Uses 15 x 15 x 2.5 inserts Bearing included, Wrench included Box included Bore 1-1/4" Balanced and verified Made in USA by Byrd Tool#48301202-5 5 lbs Black Oxide Finish Useful in other woodworking applications. Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you integrate this philosophy with the open box program, you get a customer for life! Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s)
$
40.14
Buy It Now
$0 Shipping
Condition: Used
Location: Newnan,GA,USA
$
2,000
Buy It Now
$0 Shipping
Condition: Used
Location: Piedmont,SC,USA
$
120
Buy It Now
$0 Shipping
Condition: Used
Location: Edwardsville,IL,USA
$
53.13
Buy It Now
$7 Shipping
Condition: New
Location: Newnan,GA,USA
$
79.99
Buy It Now
Free Shipping
Condition: Used
Location: Farwell,MI,USA
$
23.71
Buy It Now
$8 Shipping
Condition: Used
Location: Newnan,GA,USA
$
49.99
Buy It Now
Free Shipping
Condition: Used
Location: Farwell,MI,USA
$
24.95
Buy It Now
$7.95 Shipping
Condition: New
Location: Chugiak,AK,USA
$
25.38
Buy It Now
$7 Shipping
Condition: Used
Location: Newnan,GA,USA
Shopsmith Mark V Model 510/520 MolderTable Insert! The item# is 555121. I also have other inserts on auction.This insert would be almost $30 from the ... morefactory. Please check out my other auctions. I f you win 2 auctions or more I will send you an invoice with the total. Please note that the items will be shipped within 2 business days of payment unless other arrangements are made. Feel free to ask any questions. I have plenty of other Shopsmith items. I am also open to offers including combining other listings. Good luck bidding! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1455f06f590-0x106-
$
70
Buy It Now
$0 Shipping
Condition: Used
Location: Bennet,NE,USA
Used Woodmarc moulder carbide insert cutter head. 2-1/8" bore#2434-06 8.000 RPM. Items used showing moisture rust on one side should clean up nice. ... moreFree shipping. Please check out my other auctions.
$
399
Buy It Now
$0 Shipping
Condition: Used
Location: Farmington,NH,USA
$
45
Buy It Now
$0 Shipping
Condition: Used
Location: Chicago,IL,USA
$
24.99
Buy It Now
$8.95 Shipping
Condition: New – Open box
Location: Flint,MI,USA
$
98.8
Buy It Now
$12 Shipping
Condition: New
Location: Oregon City,OR,USA
$
150
Buy It Now
Free Shipping
Condition: Used
Location: Salt Lake City,UT,USA
$
339
Buy It Now
$0 Shipping
Condition: New
Location: Hammond,LA,USA
$
21
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
99.5
Buy It Now
$0 Shipping
Condition: New
Location: Charlotte,NC,USA
$
49.5
Buy It Now
Free Shipping
Condition: Used
Location: Stone Mountain,GA,USA
$
64.85
Buy It Now
$0 Shipping
Condition: Used
Location: Beach Lake,PA,USA
$
50
Buy It Now
$0 Shipping
Condition: Used
Location: Clatskanie,OR,USA
TRANSLATE Arabic Chinese French German Greek Indonesian Italian Hindi Japanese Korean Swedish Portuguese Russian Spanish GEETECH 13" PLANER/MOLDER ... moreDESIGNED FOR SPEED. ACCURACY, FLEXIBILITY AND OPERATING CONVENIENCE Combines planing and molding into a single unit. Precision machined planing/molding cutterhead is dynamically balanced for smooth running. Maximum stock thickness 6" Width 13" Maximum cut depth 3/32" planing) 1/4" molding) Rubber coated steel infeed and outfeed rollers. Speed Change Control shifts feed speeds from 10 FPM to 20 FPM. Specially designed Quick Guide Fence directs workpieces into molding cutter bits. One year parts and workmanship warranty. For the warranty period the manufacturer stocks a full line of replacement parts so if during the one year warranty period if any of the parts fail from being defective they will send free replacement parts! INCLUDES A FREE $130.00 Dollar SET OF 10 MOLDER KNIVES AND A REPLACEMENT SET OF 13 DIFFERENT PROFILES ARE AVAILABLE ALONG WITH 13" PLANER BLADES. Takes the same size planer blades as JET 13" and also can take different profile Molder Knives from other companies as long as they are 5/32 or 1/4" thick and under 2 1/8" long. Grizzly sells many profiles that are 1/4" thick and are very affordable. Imported. Motor- 2HP. 115V, 15A, 1PH- V-belt drive( includes 8'L power cord with plug) On/Off Switch- Mechanical toggle switch w/safety lock. Cutterhead- 2-5/8" dia. 3 knife, 5,000 RPM, 15,000 CPM. Knives- HSS. 13-1/16" x 5/8" x 1/8" Maximum Cut Depth- 3/32" planing) 1/4" molding) Capacity- Maximum 13" wide x 6" thick. Minimum 15" long. Feed Speed- 10 or 20 FPM. Feed Rollers(2) 1-3/8" dia. Table Size- 13" x 19-1/8" Integrated. Retractable lifting handles(4) 5/8" dia. steel- 2 front. 2 back. Overall Dimensions- 22"H x 21-1/2"W x 19-1/8"D. Net Weight- 130 lbs. Shipping Weight- 136 lbs. FREE LOCAL PICKUP! We only stock 1 of every la
$
51.36
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
25.68
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
68
Buy It Now
Free Shipping
Condition: New
Location: Raymond,IL,USA
$
25
Buy It Now
$0 Shipping
Condition: Used
Location: Clatskanie,OR,USA
TRANSLATE Arabic Chinese French German Greek Indonesian Italian Hindi Japanese Korean Swedish Portuguese Russian Spanish GEETECH 13" PLANER/MOLDER ... moreDESIGNED FOR SPEED. ACCURACY, FLEXIBILITY AND OPERATING CONVENIENCE Combines planing and molding into a single unit. Precision machined planing/molding cutterhead is dynamically balanced for smooth running. Maximum stock thickness 6" Width 13" Maximum cut depth 3/32" planing) 1/4" molding) Rubber coated steel infeed and outfeed rollers. Speed Change Control shifts feed speeds from 10 FPM to 20 FPM. Specially designed Quick Guide Fence directs workpieces into molding cutter bits. One year parts and workmanship warranty. For the warranty period the manufacturer stocks a full line of replacement parts so if during the one year warranty period if any of the parts fail from being defective they will send free replacement parts! INCLUDES A FREE $130.00 Dollar SET OF 10 MOLDER KNIVES AND A REPLACEMENT SET OF 13 DIFFERENT PROFILES ARE AVAILABLE ALONG WITH 13" PLANER BLADES. Takes the same size planer blades as JET 13" and also can take different profile Molder Knives from other companies as long as they are 5/32 or 1/4" thick and under 2 1/8" long. Grizzly sells many profiles that are 1/4" thick and are very affordable. Imported. Motor- 2HP. 115V, 15A, 1PH- V-belt drive( includes 8'L power cord with plug) On/Off Switch- Mechanical toggle switch w/safety lock. Cutterhead- 2-5/8" dia. 3 knife, 5,000 RPM, 15,000 CPM. Knives- HSS. 13-1/16" x 5/8" x 1/8" Maximum Cut Depth- 3/32" planing) 1/4" molding) Capacity- Maximum 13" wide x 6" thick. Minimum 15" long. Feed Speed- 10 or 20 FPM. Feed Rollers(2) 1-3/8" dia. Table Size- 13" x 19-1/8" Integrated. Retractable lifting handles(4) 5/8" dia. steel- 2 front. 2 back. Overall Dimensions- 22"H x 21-1/2"W x 19-1/8"D. Net Weight- 130 lbs. Shipping Weight- 136 lbs. FREE LOCAL PICKUP! We only stock 1 of every la
$
49
Buy It Now
$11 Shipping
Condition: Used
Location: Piedmont,SC,USA
Can not tell if it is new or resharpened.
$
25.68
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
100.04
4d 3h 27m 6s
7 bids
Free Shipping
Condition: Used
Location: United Kingdom
$
199
Buy It Now
Free Shipping
Condition: New – Open box
Location: Scottsdale,AZ,USA
$
51.36
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
2,200
Buy It Now
$0 Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
100
Buy It Now
Free Shipping
Condition: Used
Location: Raymond,IL,USA
$
154.08
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
21.4
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
34.24
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
42.8
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
60
Buy It Now
Free Shipping
Condition: Used
Location: Raymond,IL,USA
$
42.8
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
34.24
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
6,999
Buy It Now
$300 Shipping
Condition: New
Location: Brashear,TX,USA
$
51.36
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Augustine,FL,USA
$
39.85
Buy It Now
$0 Shipping
Condition: Used
Location: Beach Lake,PA,USA
$
11
Buy It Now
$8.65 Shipping
Condition: Used
Location: College Station,TX,USA
$
181.74
Buy It Now
$0 Shipping
Condition: Used
Location: Kansas City,MO,USA
LRH K-1428 Concave Carbide Shaper Cutter Molder 3/4" Deep Radius. 1 1/2" Radius Opening, 2 1/4" OA Opening Width 1 1/4" Spindle Visit ... moreMy Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14432b00509-0x105-
$
19.5
Buy It Now
$0 Shipping
Condition: Used
Location: Seattle,WA,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
Description: This auction is for Misc. lot of 9 pieces by Wilton Armetale Lot includes:Troll. Anvil& hammer, Moulder figurine. Amish family of 3. Candle stick holder duo. Beautiful pieces in good condition. Used. Condition: Good used condition. Pay ment for auction is due by the end of one week or item will be relisted. I accept payments via PayPal only. Shipping: I Always list several shipping options. I will gladly combine shipping on multiple purchases. I ship 1 day after payment recieved Please contact me if you have any questions. PLEASE READ: Items I sell are purchased at sales and auctions unless otherwise stated. All knowledge I have of the product I sell will be listed on the auction. If anyone viewing an auction has info on an auction that will effect the sale please e-mail me.
Moulder knives for either standard moulder/ shaper corrugated heads or for use in williams and hussey planer moulder. Templates included IF in picture. Otherwise grinding template not included, but easily made. 1/4" thick. All my knives can combine shipping if the price exceeds $20. Otherwise shipping will be as stated! Posted with
Moulder knives for decorative base moulding. 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for 1 3/4 bull nose edge moulding. 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Rather unusual'V'shaped moulder stamped by William Watkins. Bradford. Plane has good length iron. Clean no damage.
Older model. Still works great US Concepts radius moulder for custom radius shapes and mouldings of any size and detail Freight on buyer
Shaper Moulder Head Profile Knife Wedge Gibb 1Each. 7/16" x 7/8" x 2-3/8" Versatile for Wood Moulder cutter heads. Wood Shaper cutter heads. The wedge gibb is balanced sized to 7/16” x 7/8” x 2-3/8” The wedge gibb can be cut down edge ground and balanced for use in smaller width cutter heads. I show in my listing several photos of the exact gibb you will receive. I have set the opening bid for this auction well below the replacement Cost of $24.00 for this wedge gib to encourage B idding not Sniping! To discourage snipers I reserve the right to cancel all bids at any time while the auction is live accept during the last 12 hours before the end of the auction. In the future if you need your knives sharpened or a custom set made please contact Wayne@ 941-400-2362 Email: jwjholdings@gmail.com Payment Terms: Payment for all auction ... moreitems is expected via PayPal within 24 hours of the auction end. Auction items remaining unpaid after 4 days from auction end date and time are automatically reported to eBay for collection. PayPal is the only method of payment we accept unless previous acceptable arrangements are made in within 24 hours in advance of the auction end. Shipping: We ship items Monday through Friday weekly using USPS priority mail service. Please understand that as a general rule. We are unable to ship on Saturday but will make exceptions if possible. We ship only to eBay and PayPal verified shipping addresses. Buyer is responsible for all shipping insurance and handling charges on returned items. Combined Shipping Rules: To avoid confusion on my end and maintain the level of service offered I invoice daily each item or items sold. Under no circumstances will shipping be combined for items purchased today with additional items purchased on Any Other Day! Shipping service provided for domestic USPS First Class& Priority Flat Rate for international ONLY! I will only combine up to two(2) gibbs maximum per package due to the weight restriction for USPS First Class packages. The rate charged for
Set of 4 Corrugated Crown Moulding Knives I don't know much about these. Selling them for my boyfriend who had them custom made for a customer who wanted to match their existing moulding. They cost $400 then. If you need me to measure anything just let me know, I will be happy to. See all the picts, there's some samples of wood that the cutters cut so you can see the profile. Thanks for looking!
Axminster WS1000TA Spindle Moulder. Product Code: SP005143/ Returns Reference RT162454. Returned to us due to not being suitable for the customers needs. Upon return to our workshop the WS1000TA was inspected by one of our engineers. The table has been adjusted and the spindle moulder cleaned. Not faults found. A fully functional spindle moulder looking for a good home. Listed at a snip of the retail price a great chance to grab a bargain. Due to the size and weight of the advertised delivery is to be completed by Axminster Logistics. Typically completed within 2 weeks but can take up to 4 during busy periods- a more personalized service to ensure your new purchase arrives to you safely. 16 amp supply required. Repaired. 6 Month Warranty. Huge Savings. Free Delivery* Delivery to UK mainland only. Key Features. Sliding table for precision ... morework Four spindle speeds with digital read out of speed Cast iron table 2.8kW braked motor. Technical Specification. Model WS1000TA Rating Light Trade Power 2.8kW(230V 1ph) Spindle Travel 100mm Spindle Diameter 30mm Max Spindle Projection above Table 100mm Max Tooling Diameter Above Table 200mm Max Tooling Diameter Below Table 180mm Table Height 900mm Table Size 1.000 x 360mm Dust Extraction Outlet 100mm x 2 Overall L x W x H 1.150 x 1,155 x 900mm Weight 218kg. About our Clearance Outlet. Items branded as part of our" Clearance Outlet" within our eBay store are typically customer returns or part of our clearance range( ex-demo. Samples, obsolete models etc) Due to the nature of the advertised they have typically been used. Unless stated otherwise. The item has been checked& bench run by our engineers to ensure the unit is in a working order( unless stated) Calibration maybe required with a possability of minor parts missing- this is why it is offered at a reduced price. Please do contact us with any questions- happy bidding. Copyright © Axminster Power Tool Centre Ltd 2012. Unit 10 Weycroft Avenue. Axminster, Devon EX13 5PH. United Kingdom Powered by 7.RcmdId V
Two 9" Weinig brand spiral aluminum Moulder heads. One has blade and one does not. Call with questions. 419-852-1065 Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e03ab0bee-0xf6-
Moulder knives for 1" qtr round moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for secorative face frame or cabinet door face moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative crown or bed moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e044872e3-0xfc-
Moulder knives for decorative panel or lip moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative base cap moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e04487328-0xfb-
Moulder knives for decorative crown moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative 2 3/8 full round moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative 2 at a time panel moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for eased edge 13/16" moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for cap profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for applied profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for cornice profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for cope and stock or mitered door sticking moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for casing 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for edge or back 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative panel moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for cap or rail moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for crown moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e04597721-0xfc-
Moulder knives for base moulding minimal signs of use 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for panel moulding 1/4" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative handrail or casing moulding.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for rabbet cutting for general use or making t-astragals.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for general use or making t-astragals.5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for gang stop production 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for crown moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for dado moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for cove moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e046fddb1-0xf4-
Moulder knives for door profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e046fdd49-0xf3-
Moulder knives for panel profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative profile moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative profile casing 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for decorative profile astragal 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for bull nose moulding 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
This is a near new 9" Terminus head. The head has a 1 13/16 bore and is in excellent condition. The head was bought new from Hermance Machine and thet advertise them now on sale for $895. I have two 9" and two 4" for sale. This auction is for one 9" Any questions call Steve 419-852-1065 Posted with
Five head Diehl Moulder with frequency changer. Has 2"x 4" capacity. Call 505-620-0355 with any questions, thank you.
Vitor Sabadell 3 phase motor 3400 rpm 277/480volt has extended shaft for cutters off of working high production moulder Model ALF90- cutter area 6 1/2" long shaft from motor length is 9" I don't have any more info on it. No liability expressed or implied on installation or suitability for a particular use. See my feedback. And bid with confidence. Winning bidder must reply within 3 days of final bid and payment received with 7 days of final bid. TERMS: ALL non-paying bidders will be filed with ebay. All items sold as is-please see pics and ask questions, SHIPPING: Ship UPS Ground We no longer accept INTERNATIONAL bids. Please email ahead of time, if you wish to have it dropshipped to a US address, please don't bid unless you can make these arrangements. FOB point of origin, If you do not accept the above shipping terms. ... morePlease do not bid.
CMS 4502 Moulder Manufacturer: Weinig Model: Powermat 400 YMFG: 2007 Condition: Very Good Location: Northeast Price: $89.500 6-Head moulder, CNC controls, Powerlock heads, This machine has been used in a custom shop. Owners says the machine has very low usage. Contact: Chris Deal 704-288-1904 x 108 link to machine: http:
4 Head. 4" X 6" Push feed XL Moulder. Has 2hp drive, 5hp runs both side spindals, 10hp runs top and bottom spindals. Motors are 3 Phase 220/440 and works fine. A good small shop machine or permanent set up for a larger shop. Air mist injection system keeps the bearings cooler. Sold as is. Comes with 1-6" quicklock aluminum head and planer knives and 1- 6" steel XL head with no knives. Sorry no side heads included. 1 1/4" shafts throughout. Can be site loaded with a forklift. I will consider freight shipment.
Hard to find Inca table saw moulding head. I got it with a used Inca jointer-planer. Fits 20 mm shaft on Inca saw. Very nice. Clean condition. Comes with a pair of 1/4"radius half-round cutters. The cutters are badly dinged on one side. Would have to be reground for some other profile or used as a template for other cutters. Returns only if item not as described.
antique brochure oliver machinery co. 4" moulder 1 pages 9"x11" 1934
more photos of grinders and moulders and used inventory here: To request a short video of this United tool grinder running. E mail us at pleasantstmachinery@ G mail. com if you want to see it. Pleasant St Woodworking Machinery has been rebuilding equipment for 20 years and working with wood for 40 years. Our customers are industrial manufacturers. Skilled craftsmen, and high end hobbyists looking for the right machine for the job. Our 20,000 square foot warehouse and full metalworking shop is located in DeKalb, Illinois. We completely go through, run, and test the used machines we sell. 815)758-6534 Foley United tool and cutterhead grinder. Setup up for router bits. Includes bit and knife holder. Model 50. Used, fair condition, new table bearings. Runs well. The boss dressed some new router bit profiles on it. No evidence of bearing chatter ... moreor vibration. Sold as is in running condition, no arbor. 1.0 hp motor wired 208v/220v/440volt 3phase. Shipping will be on a pallet 42 inch x 48 inch. 58 inch tall, weight 950 lbs. We get great freight rates, call with zip code of business address. Should be around $125-$325 in U.S. Residential adds about $100) Call us for a video*815*758-6534. Local pickup is always welcome, by appointment. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized in rebuilding American machines that are ready to work and do what you want them to do. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You!
William and Hussey/ Shop Fox Moulder 4 1/2" Crown Profile Cutter Blade Set Used cutter set High Speed Steel See pictures of both front and back side of blades. Along with a drawing of what the piece of mouling would look like.
William and Hussey/ Corrugated Shaper/ Moulder 3 1/2" Profile Cutter Blade Set For use with shaper or moulder using corrugated head. Template included Used cutter set High Speed Steel See pictures of both front and back side of blades. Along with a drawing of what the piece of mouling would look like. This is a moulding I've used with making mantles. Both under the mantle shelf set back from front edge and have also aplied to the front edge to make look like a thicker mantle shelf.
William and Hussey/ Shop Fox Moulder 2 1/2" Profile Cutter Blade Set Half fluted Column(flat backside) can be applied to flat stock. Used cutter set High Speed Steel See pictures of both front and back side of blades. Along with a drawing of what the piece of mouling would look like.
William and Hussey/ Shop Fox Moulder 3 3/4" Profile Cutter Blade Set Used cutter set High Speed Steel See pictures of both front and back side of blades. Along with a drawing of what the piece of mouling would look like. I've used this in the past with building up layers of mouldings. Using this first and adding maybe a bed moulding(or other moulding) at top end of this piece.
William and Hussey/ Shop Fox Moulder 6 1/2" Profile Cutter Blade Set Used cutter set High Speed Steel See pictures of both front and back side of blades. Along with a drawing of what the piece of mouling would look like.
William and Hussey/ Shop Fox Moulder 1 3/4" Profile Cutter Blade Set Used cutter set High Speed Steel See pictures of both front and back side of blades. Along with a drawing of what the piece of mouling would look like.
Moulder knives set of small various profiles. Save on shipping! 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for tounge and groove with chamfered edges both sides. Very useful for gates doors and others. 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for million stock and glass stop for doors same profile 5/16" thick. Grinding template included if pictured. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
2 blades for moulding or trim cutting. Not sure make. Good condition. Will be listing several lots. Thanks for looking and be sure to check out my other listings. Thanks. Posted with
3 blades for moulding or trim cutting. Not sure make. Good condition. Will be listing several lots. Thanks for looking and be sure to check out my other listings. Thanks. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e411f60fd-0x105-
UP FOR SALE IS THIS VERY NICE WADKIN NX300 PROFILE GRINDER FOR GRINDING MOULDER KNIVES. 12-1/8" MAX ARBOR CAPACITY. 2 HP GRINDING MOTOR. VARIABLE SPEED 1800-3000 RPM GRINDING WHEEL SPEED. CUTTING CIRCLE 11-7/8" TO 2-7/8" DIA. INCLUDES COOLANT PUMP. THIS MACHINE IS WIRED FOR 220V/460. 3 PHASE. INSTRUCTION MANUAL INCLUDED. SUCCESSFUL BUYER TO PAY FOR CRATING AND SHIPPING OR MAY PICKUP HERE IN SAN DIEGO. CALL GEORGE ON ANY QUESTIONS.
Used Titan 9" 230mm) Moulder Head- 125mm Body Dia. 1.5" Bore. With Face Shear- 6 Rows of Knives. Selling because we upgraded our equipment. New ones retail $850.00 at Global Tooling.
Moulder knives for traditional door applied moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for traditional door moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13e4ea210c4-0xf9-
please call The Woodworkers Locator(815)758-6534 for more feed through moulding machine photos or goto this link Paulson 4Nbj. 5 head moulder 2.5 x 6.5 inch capacity, high precision high speed bearing with lubrication, has mount for outboard feeder, head sequence BTLR and Bottom on outfeed, Compact setup with excess capacity for a push feed molder chain for feed drive in good condition. Rubber top rollers have plenty of life remaining, steel bottom rollers are tight as well, this machinery was used by a small cabinet shop in Illinois more photos here http:www.pleasantstmachinery.com/ come out to our woodwork shop in DeKalb and see this Paulson equipment run SHIPPPED F.O.B. from 60115. No loading costs on a flatbed, $100 to palletize for a van or box truck, we get good LTL rates we enjoy visitors by appointment in our woodwork workshop shop ... more60115. Please phone first(815)758- 6534 You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as machinery rebuilders and dealers. To help you choose the right woodworking equipment for your shop. Pleasant St Woodworking Machinery has been serving skilled craftsmen. World-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt woodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized in rebuilding American machines that are ready to work and do what you want them to do. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You! Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.0% State of I
Moulder knives for panel moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for chair rail moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for back band moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for elegant casing moulding. 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES Weinig Quattromat 4-Head Moulder Model No: 23P Year: 2002 Condition: Excellen t Rating: 5) Used/Untested Apx. Replacement Cost: $ 39.000.00 Technical Specifications: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 460V. 60Cy, 3PH Working Cap. 9-1/16” x 4-3/4” Spindle: Bottom 7.5HP Right/Left Heads 10HP. Top 15HP Motor 1-1/2” Spindle Diameter with cutterhead speed of 6.000 RPM Feed Speed: 26 FPM Infeed Table: 2M 6’ 6” w/adjustable fence. Specifications listed are to the best of our knowledge* Verification available upon request* Our ratings are as follows: 1) New Surplus: Equipment or parts are new. 2)Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. ... more4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. PLEASE VISIT OUR EBAY STORE FOR MORE GREAT PRODUCTS! Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. Shipping: Buyer
Moulder knives for panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with
Moulder knives for detailed traditional casing moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. Otherwise shipping will be as stated in listing. Bulk picture is of future knife listings. I will be posting 20-30 per week so keep looking for the next 6 months! Posted with