In 
 
Order by: 
Available to: 
Price: 
 - 
$
3,100
Buy It Now
Free Shipping
Condition: Used
Location: Millstadt,IL,USA
$
39.99
Buy It Now
$0 Shipping
Condition: New
Location: Tracy,CA,USA
For panel saws or sliding table saws with separate scoring units for chip-free cuts on both sides of the material. Adjustable scoring sets consist of ... moretwo 12-tooth saw blades with shims to adjust the kerf width(2.8mm to 3.6mm) 160mm Diameter 3/4" Bore Made in Germany Provides incredibly smooth chip-free cuts. Easily resharpened. Carbide-tipped. PME Distributors. Inc Amana Tool Authorized Dealer(209) 835-9377
$
395
Buy It Now
$0 Shipping
Condition: Used
Location: Ellicott City,MD,USA
$
84
Buy It Now
$0 Shipping
Condition: New
Location: Tracy,CA,USA
For panel saws or sliding table saws with separate scoring units for chip-free cuts on both sides of the material. Adjustable scoring sets consist of ... moretwo 12-tooth saw blades with shims to adjust the kerf width(2.8mm to 3.6mm) 160mm Diameter 3/4" Bore Made in Germany Provides incredibly smooth chip-free cuts. Easily resharpened. Carbide-tipped. PME Distributors. Inc Amana Tool Authorized Dealer(209) 835-9377
$
60
Buy It Now
Free Shipping
Condition: New
Location: Hollister,CA,USA
$
239.96
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
200.66
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
204.71
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
204.71
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
131.85
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
204.71
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
215.89
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
239.96
Buy It Now
Free Shipping
Condition: New
Location: Wayland,MI,USA
$
79
Buy It Now
$0 Shipping
Condition: New
Location: Charlotte,NC,USA
1
 In 

Past Items  
 
What You'll get: SCMI Basic-1 Edge-Bander Industrial EdgeBander Woodworking Machine Trimmer Installed Bosch GGS-27 Electric Die Grinder Installed Bosch 1210 Electric Utility Die Grinder Attached Power Cord Due to the size and weight of this unit it will need to be freighted. Please contact us via email for a freight quote or for a local pick-up. Dimensions: 85" x 38" x 51" Other Accessories that are Not pictured or mentioned under"What You'll Get" are Not included Please visit our eBay Store for more similar items! Testing: Pulled from a working environment. However since we are unable to test this unit it must be Sold As-Described! Cosmetics: Pictures are of the actual item. Please See pictures for cosmetics. Policies& Definitions: Shipping Most items ship out within 1-2 BUSINESS days after the payment ... moreclears. We allow local pick up. Handling fee of $9.99 and CA tax will apply. We combine shipping to save you money if the items can be combined and shipped safely. We offer a combined shipping discount of $3 for each additional item purchased. Free shipping offers do NOT apply to Puerto Rico. Alaska, Hawaii and international transactions Definitions: GUARANTEED WORKING MEANS: The item is guaranteed working as long as we receive it back within 30 days from the purchase date. We will replace the item at no additional cost if the item is DOA. If replacement is Not available. We will refund the purchase price. Please bid accordingly. AS-IS MEANS: The item is sold AS-IS Where is. This means that the buyer acknowledges that the item may or may Not be working and that the item may or may Not be complete and the buyer is willing to accept the risk. Please bid accordingly. Shipping and handling cost is Not refundable under any circumstances and the buyer is responsible for any additional shipping cost. please bid accordingly. Return Policy Every item we sell is carefully inspected before it is shipped and is tested to the best of our ability. If merchandise is Not as described please ke
SCMI BASIC 2 EDGEBANDER EDGE BANDER 5/16" MAX EDGE CAPACITY Click Images to Enlarge ​SCMI BASIC 2 EDGEBANDER EDGE BANDER 5/16" MAX EDGE CAPACITY MATR: AH/101078 REF: 06-13-26 COMP: B KG: 870 VOLTAGE: 230 PHASE: 3 HZ: 60 YEAR: 1997 1.2 mm CAP GUILLOTINE OVERALL MEASUREMENTS: 131" x 40" x 53" WEIGHT: 2002 LBS LOADING FEE: $25 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. ... moreIf you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us at info@1machinerysales.com with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett,
36" WOODWORKING DISTRESSING ROLLERS BELTRAN INDUSTRIAL SALES, CLICK PHOTO TO ENLARGE* USED BUT IN GOOD WORKING CONDITION* USED FOR DISTRESSING WOOD. THEY WERE REMOVED FROM A BELT SANDER CONVERTED TO DISTRESS* LENGTH-36" COMES AS SHOWN* ROLLERS ONLY) WE ACCEPT ALL MAJOR CREDIT CARDS* TAX MAY APPLY* PAYMENT MUST BE MADE WITHIN 4 DAYS OF PURCHASE! CALL FOR LOW COST SHIPPING! LOCAL PICK UP IS ALWAYS AVAILABLE ALONG WITH FREE LOADING BY APPOINTMENT ONLY! PLEASE. PLEASE, PLEASE CALL AHEAD! EVEN DELIVERY CAN BE ARRANGED! ATTENTION! ANY RETURN SHIPPING MUST BE PAID BY THE BUYER! WE ENCOURAGE ALL BUYERS TO VIEW ALL PHOTOS AND ASK ALL APPROPRIATE QUESTIONS PRIOR TO MAKING FINAL PURCHASE! ALL ITEMS COME"AS IS" ALL ITEMS ARE USED UNLESS OTHERWISE STATED! QUESTIONS? FEEL FREE TO CALL ROBERT(626) 945-6018 OR GABRIEL(626) 945-6951* ATTENTION! ... moreEFFECTIVE JANUARY 1. 2012 BELTRAN INDUSTRIAL SALES WILL BE CHARGING A $25.00 FEE FOR EACH ITEM REQUIRING A PALLET. THIS WILL INCLUDE A STANDARD 48"X40" PALLET. METAL BANDING, AND SHRINK WRAP IF NEEDED. ANY ITEM REQUIRING A LARGER OR CUSTOM PALLET WILL BE EXTRA. PLEASE CALL FOR DETAILS. PLEASE VISIT OUR STORE OFTEN FOR MORE INDUSTRIAL ITEMS. MORE ARRIVING DAILY. THANK YOU! by adding my eBay Store to your Favorites! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Runs well 3/4" 1" 1&1/4" spindles and wrench included
Up for Sale! SCMI MB 29 SPINDLE LINE HORIZONTAL/ VERTICAL BORING MACHINE Technical Specifications: 3HP. 230V, 3Ph 2.800 RPM Motor 6 Position Turret Depth Stop 2-3/4" Max Boring Depth 41" Throat Capacity 44" x 22" Table Size Overall Dimensions: 72" x 60" x 48" Net Weight: 1.100lbs We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. SE HABLA ESPAÑOL. OCMACHINERY AT GMAIL COM 714 658 5390 We can help with freight and local delivery. FREE LOADING IN ALL PURCHASES
see more photos online here We enjoy visitors by appointment. COME SEE THIS IN NORTHERN il ZIP 60115! We have been buying and selling used woodworking machinery for 40 years. MORE PHOTOS AT THIS LINK. SCMI made these for compact shapers for Rockwell. Model T100 with 1.25 inch single spindle. Heavy cast iron fence. Approximate 5hp 230volt 3phase motor, includes reversing switch and speed switch. Bearings seem fine, no electrical issues, no vibration when we ran it. You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as machinery rebuilders and dealers. To help you choose the right woodworking equipment for your shop. Pleasant St Woodworking Machinery has been serving skilled craftsmen, world-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt ... morewoodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You! Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.00% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on all items. An additional $25/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. ALL
Universal Listing Code- Mark SCMI Model S63T 24" Wide Single Planer with 4-knife General Info: Stock# 412523 Condition: Used Tested: Item has been tested Brand: SCMI Model: S63T Serial: AB.6471 Year: N/A Weight(Approximate) N/A Machinery details: 24" wide single planer with 4-knife. Staright cutter head-Built in motorized knife grinder-12HP 220/60/3Ph cutter head motor-Sectional rods. Kick backs and chip breakers-Motorized thickness 9" Max. Dust enclosure with 5-1/2" diameter opening Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084
CMS 4027 Shaper Manufacturer: SCMI Model: T130 Programmable YMFG: 2003 Condition: As Taken From Service Location: Southwest USA Price: $12.000 1-1/4" spindle Programmable Controller for fence. Spindle and table Aluminum fence contact: Chris Deal 704-288-1904 x 108 link to machine: http:www.carolinamachinerysales.com/page=detail&id=used&machine=4027&input=Go
THIS IS A 37 Inches 2 heads wide belt sander for sale Model: UNO RCS YEAR: 1997 Serial No: 015426 The machine is in really good condition. 220 3 phase Email me for shipping cost
CMS 4026 Wide Belt Sander Manufacturer: SCMI Model: Sandya 20 YMFG: 2002 Voltage: 230V. 60Hz, 3Ph Condition: As Taken From Service Location: Southwest. USA Price: $27.500 Specs to be confirmed: Model Sandya 20 M3-135 3-Head machine 1st Head- 40 HP Steel contact drum 2nd Head- 35HP Rubber contact drum 3rd Head- 25 HP Combo drum/platen 52" Capacity 52" x 103" Belt size 10' Roller conveyor infeed Powered conveyor return system This unit is coming out of a bankrupt shop. Conveyors are included. Contact: Ralph Viegelmann 704-288-1904 x 101 link to machine: http:carolinamachinerysales.com/page=detail&id=used&machine=4026
Main technical data: Max. cutting length: mm. 3222- Max. cutting heigth: mm. 90- Max diameter on the main blade: mm 350- Score diameter: mm. 160- Blade hole diameter: mm 80- Score hole diameter: 55- Main blade motor power: HP 10- Scorer motor power HP 2- Blade feed motor power: HP 0.5- 0,8- Blade feed speed: m/min 13.5-27- Pusher fast feed speed m/min 6- Pusher slow feed speed: m/min 0.2- Pusher return speed m/min: 6- Blade rotation speed: 3800- Scorer rotation speed: 5800- Pneumatic system pressure: bar 6- Air consumption for each suction hood: mc/h 1200-Suction hood diameter: mm 120-Machine net weight: kg 2060 SECOND-HAND MACHINE. NOT IN WORKING ORDER. We can disassemble the machine and load it onto a truck free of charge. But all shipping fees are to be handled by the buyer.
This saw was in working order when removed from the previous owner. It has not been fully hooked up to run at our facility due to the job/material requirements changing to a material that had to be sheared instead of cut. To finish connecting this equipment. The air lines will need to be identified and and inserted into their proper quick connect fittings. Also, the sensor plugs were unplugged from their control valves and will also need to be reconnected. Both of these items will just take some time to trace what components they go to and reconnect. The original rigging company disconnected items that didn't need to be tampered with and didn't mark where to plug them in. Please let me know if you'd like further pictures of specific areas. We will disassemble and load on an open side truck for no charge. This item is listed elsewhere ... moreand we reserve the right to end this listing.
This listing is for a used but in good working condition SCMI MB-51 Horizontal& Vertical Wood Boring Machine Made in Italy 220 Volt 2 HP Machines Weight is 1190 pounds Contact me if you would like a freight quote or item can be picked up in Clovis. California
29-Spindle boring head. Drills vertically from top& horizontally from rear, 35-9/32" 896 mm) between outer spindles; 40-15/16" max. width for passing panel through front-to-back. 3 HP- 2.800 RPM motor, 6-position turret depth stop, 2-3/4" max. boring depth, hydraulic brake for vertical"through boring" head assembly tilts back pneumatically. Complete with: 3) Air hold down clamps. Index pins for line boring, line boring fence, side fences and(8) flip stops; foot pedal operated. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e6425de08-0xf7-
SCMI Model UNO 36" Wide Belt Sander General Info: Stock# 413542 Condition: Used Tested: Item has been tested Brand: SCMI Model: UNO Serial: SA002026 Year: N/A Weight: 1685lbs Machinery Details: 36" Width Capacity Sander with combination steel contact drum-1-1/2" wide polishing platen-Double rubber covered hold down rolls amtermeter-18HP drive motor-Sanding Belt Speed 3150 SFPM-1HP. 2-Speed drive-230/460V 3Ph Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084
Universal Listing Code- Mark SCMI Sanya Model UNO-CS 36" Wide Belt Sander General Info: Stock# 313522 Condition: Used Tested: Item has been tested Brand: SCMI Model: UNO-CS Serial: AE009169 Year: N/A Weight(Approximate) 1850Lbs Machinery details: 36" wide belt sander with 5" diameter steel contact drum-2" wide platen-37" x 60" Belt capacity-Waffle type feed conveyor with infeed and outfeed roller extensions-15KW main drive motor. 1HP feed drive, 1/2HP raise and lower motor-Set thickness device-230/460/3Ph. Wired 230 Volt-4 jack screws Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084
The item up for auction is late 1990's 12" Sliding Table Panel Saw. It is in used condition with minor scratches and dents due to normal operation. But otherwise is in good working order. The item is available for local pickup in Marietta, Ga or can be arranged for shipping at the cost of the buyer. The specifications are: Fixed Table Size: 22" x 34" Sliding Table Size: 25" x 45" Table Height: 33.5" Rip Capacity: 59" Tilting Arbor: 0- 45 degrees. Max. Length of Crosscut with Scoring: 126" Arbor Speeds Main/Score: 4800/9600 RPM. Main Blade- Diameter/Arbor: 1" Scoring Blade- Diameter/Arbor: 75" Dust Outlet- Main/Over Arm Guard: 4"2.5" Depth of Cut- 12" blade/12" at 45 deg: 3.75"2.6"
This listing is for a SCMI Tenoning Slide. This item is in good condition. Please take a careful look at our photographs. Plate measures 11 3/8" x 12" Total size 30" x 6 1/2" Weight 72 lbs internal reference I Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined ... moreafter the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased
tersa 25"head.4 speed,digital thickness reader-display,3phase220v 11kw,work prefect
SCMI R8 pin router knob handle. This is the kind of handle that is spring loaded. So if you want to tighten or loosen you just turn it but if you want free play you pull out while you are turning. Measures 4" x 4"
SCMI Mini Max T 124 copy lathe. Will copy an actual part or will turn a part from a pattern you cut. Will scale your part or pattern larger or smaller. Comes complete with owner's manual and other information. Extra brand new cutter. Adjustable rest for doing hand work. Has custom made bowl adapters for both ends of the shaft(see photo) Multiple speeds through pulley combinations. In extremely good to excellent condition. Comes with a few extra parts. What you see in the photos is what you are buying nothing more. Will have to ship via Freight. I can recommend a freight broker but all fees to be paid by the buyer. I will load it for free. I can strap it to a pallet for $50.00 Must be paid in full within three days of auction end.
Used SCMI Model SC900(36" Band Saw. Used SCMI 36" Band Saw in Good Condition. Saw was fully functional when recently removed from service and is in good condition. Saw is complete but requires a new magnetic starter. Carter blade guides need some repair. Parts(or new guides) are available. Barrel-top dust collector in photo is not included. 230/460V 3 Phase. 9 HP Max. Cutting Height 20-1/2" Max. Cutting Width 34-7/16" Table tilts to 36 degrees Blade length 239-247" 1-1/8" max. width Height: 110-1/4" Weight: 1500 lbs. Loading of this machine will require careful coordination between the buyer and seller. We must have information regarding the type of truck or trailer the buyer will be supplying for pick-up. This machine is for LOCAL PICKUP ONLY. We will not ship this item. The saw is located in the nortwest ... moresuburbs of Chicago. USA Bidders only. Wood Werks Supply is a full service woodworking machinery and supply dealer. Please email us or phone 847-526-1411 for more information regarding this machine or any of your other woodworking needs. Powered by The free listing tool. List your items fast and easy and manage your active items.
Normal 0 false false false MicrosoftInternetExplorer4 1996 SCMI Compact 23 Five Head Moulder. In good running order with spare heads and tooling. See photos for specs and call or email for more information. Thanks for looking! Edensaw Woods.
Scmi tablesaw mitre gauge- not sure if bar is original. Very good condition- some rust on the inside of casting- Bar is ~17.75"L x 5/8"w x 3/8" d Please ask any and all questions before bidding. Sold as is. Will be listing my extra Delta. South bend, etc. parts and tooling in the next few weeks. Pay pal only. I do combine shipping. Shipping is generally to US only- however i have shipped to canada before but you must ask for shipping cost BEFORE bidding so you don't get shocked. I expect payment within 3 days or item will be relisted
BT# 14352 TJ-099.1Y You are looking for: WEIMA WLH1300 WOOD WAST GRINDER 48"x17' INFEED SHAKER PAN CONVEYOR 75HP USED AND TESTED ITEM. IN EXCELLENT CONDITION! 30 DAYS WARRANTY! Manufactured by: WEIMA. Additional info: WOOD WAST GRINDER Model: WLH1300 Serial no. 600-418 Infeed Shaker Pan Conveyor: 48”x17’ inside dimension Feed Opening: 51.2”x6” Rotor diameter: 14.5” Rotor Knives: 70 Rotor Speed: 450-600 rpm Main Motor:75HP Voltage: 460/3/60 Screen size: 9/16” Air Speed required: 3.000cfm Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 5 business days We ship with: Powered by
Gold International Machinery Corporation | SCMI Model T110 Single Spindle Shaper Our Inventory Number: 0151-630 Technical Specifications: SCMI model T110 single spindle shaper, SN KF160984, 6.6HP 3-phase 220 volt motor, 1 1/4" diameter x 5" interchangeable spindle, 39" x 25" table, fence assembly with independently adjustable left and right fence sections, spindle guard, shaving hood, 3000. 4500, 6000, 8000 and 10000rpm spindle speeds, Approx Weight: 600lbs, Equipped With: reversing switch, set of wrenches, operation manual, parts list, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned ... moremachine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s machinery and equipment needs. If you should have any questions or concerns about this item. Please contact us before placing a bid. We are always available to handle your requests. We can be reached directly by phone du
Older. Italian made, in very good condition and not used a lot. I've cleaned up all the surface rust on the tables, any loose rust on the stand and thoroughly cleaned out all dust and debris. Has scoring blade motor and adjustments. Rip fence, cross cut fence/frame and extension table. Everything moves smoothly. 9 hp. 3 phase main motor with fractional hp 3 phase scoring blade motor. One inch arbor spins up to a 16" blade. Wiring and connections in the starter seem to be in good shape but some wiring needs to be updated/replaced and the dust extraction connection is cracked. Includes brand new main motor belts. Local pick-up. Please.
UP FOR BID IS AN SCMI T110 SHAPER. IT IS 25 YEARS OLD BUT IS IN FINE WORKING ORDER. FOR LOCAL PICK-UP. ITEM IS LOCATED IN MANASQUAN. NJ AND MUST BE PAID FOR AND PICKED UP BY JUNE 30. CHECK OUT MY OTHER AUCTIONS FOR ADDITIONAL EQUIPMENT!
SCMI Sliding Table Saw; Model# SI16W FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528
230V. 3Ph, 60 Hz, 6.6kw(9HP) 1-1/4" spindle, Adjustable fence, Spindle locking handle on the front control panel, Max. insert opening 13.5" Samco 4-Wheel Power feeder is NOT included and has been removed by the seller. Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. ... moreThis item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f6a627c8a-0xf9-
SCMI R9 AUTOMATIC PIN ROUTER 36" THROAT HYDRAULIC FLOATING SPINDLE AUTOMATIC VARIABLE FEED TABLE TILTING SPINDLE FOOT TREADLE 9 HP 220/440v 3PH 10.000/20,000 RPM TOP OF THE LINE OF THESE MACHINES RUNS GREAT. VERY POWERFUL, EXTREMELY VERSITLE
Lightly used. In excellent condition. Top of the line. Commercial grade shaper. Made in Italy- Forward and reverse- 5 speed- 3 phase- 2 spindles included: 3/4" 1 1/4" 1/2" router bit collet- non-tilting Otherwise fairly standard. Comes with original paperwork.
SCM SCMI Contura Contour Edgebander f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f7c356295-0x106-
SCMI B4-L Edgebander Model: B4-L Year: 1998 See all specifications below. FUNCTIONAL GUARANTEE. WE DO NOT SELL MACHINES THAT DO NOT RUN! 100% positive feedback! This is a great machine and can be seen and inspected under power! Machine Specifications: 3/4 Edge thickness capacity Standard hot melt glue system automatic edge strip feed for coil or strip stock 3-Roll pressure section Double motor end trim 0.5 HP 12.000 RPM each tilts 0-15 degree top& bottom flush/bevel trim bevels 0-45 degree(2.4HP 9.000 RPM each) Dual feed speed 32& 48 Feet per Minute 1.2/2.8 HP feed motor Contact Pro Tech Machinery for more details! While we do not offer extended warranties on the sale of used equipment we will guarantee that all major functions of this machine will be in working order upon pick up. SAFETY DISCLAIMER- Buyer/Purchaser fully understands ... morethat the possession and operation of any industrial equipment or machine has inherent dangers and safety requirements. Buyer/Purchaser agrees that he/she has complete working and operational knowledge related to this item. As it relates to safety guards, rotating parts, cutting tools, electrical shock, safe operating speeds, and any other components of the machine, present or missing. Buyer/Purchaser agrees to hold Seller and his agents harmless from any injury or tort resulting from the operation or possession of this item. Shipping is not included but quotes are available upon request. We will ship via air ride flat bed across the entire United States and Canada. International shipping is also available. Be sure to check out our other items for great deals on industrial machinery!
SCMI Mini Max Shaper 3 HP. Sliding Table, reversable, 3/4" spindle, very nice smooth running machine. I like the machine so much I upgraded to a much larger Shaper from the same manufacturer. You can do a lot of work with this machine.
One Tongue and Groove Moulder/ Shaper cutter head. The head uses replacable carbide inserts. I believe the cutter head is made by Byrd. I am currently researching this. O.D. is 6" I.D. Bore is 2-1/8" height of the cutter head is 2" and the height of the carbide insert is slightly more than 1-9/16" closer to 1-19/32" Please contact before buying if more info is needed. The cutter can also be run on a shaper using an insert to reduce down the shaft diameter. The cutter head is used but in good condition, it has a few minor scratches that can be seen in the photos. Returns accepted if returned in the same condition sent and returned within seven days of recieving.
SCMI Gang Rip Saw; Model# M-3 Manufacturer: Scmi Model: M-3 Year: 1996 Electrical Specs: 3PH Type: Used Condition: Reconditioned Description: 11-7/8" width arbor capacity 60 HP- 4.200 RPM motor 70 mm dia. sleeve for 12" 14" dia. saw blades 4-3/4" max. depth of cut 8-3/4" throat depth 14" min. stock length 2 HP feed motor 70 FPM direct drive through gear reducer Automatic chain lubrication 60" x 30" table(2) upper infeed& 2) upper outfeed rollers at 4" in dia Top& bottom anti-kickback fingers. Main dust hood with 8" dia. outlet Please call Kevin 239-239-1528 with any questions or information
SCMI CNC Machining Center; Model# Tech 80 Point to Point; Upgraded with Win 732 bit Year 2000 Please call Kevin 239-250-1528 FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM
CEMCO 1000 Widebelt Sander- 36" Width capacity/ Combination sanding head with 5-1/2" rubber covered grooved contact roller and independently adjustable 3-1/2" polishing platen; 20 HP main motor. 36" x 60" Abrasive belt size. Electric eye tracking. 1 HP variable speed feed 15-60 FPM; 0" 6" manual manual part thickness opening of conveyor bed with(4) 5-ton lifting jacks, infeed& outfeed rubber covered holddown rollers, 24" infeed& 20" outfeed. Sander is in excellent working condition- contact roller is in very good shape and conveyor belt in good condition as well- Buyer can pick up at 56470. Arrange own freight, or contact for a shipping quote. Will palletize and load no charge! Feel free to contact Jason at 320-492-7714 with any questions and to discuss payment options- On May-30-12 at ... more18:11:33 PDT. Seller added the following information: Shipping Price Estimator, Delivery Zip: Weight: lbs. powered by, 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13fbf8cc952-0xe8-
Price Reduced! Was listed at $29.950! CNC Router for Doors- Manufactured Year: 1995 New control in 2002(OSA. 10/565) As Is, Where Is condition. Buyer responsible for rigging and loading on a truck. New replacement cost is $235,000! 7.5HP Spindle. Single-attachment with manual rotation at 360°, 10HP Spindle. 18,000 RPM with Automatic Tool Changer, the worktable is equipped for handling. Positioning, and clamping doors to be machined. It includes: Feed belts with vertical fold away movement. The belts are fixed on the support devices for the work pieces(mobile and fixed beam) they are made of anti- scratches and anti-scraped material to avoid damages on delicate surfaces, vacuum modules for door clamping, reference stop fixed on the gantry for lengthways door positioning, automatic positioning by program of the mobile beam according to ... morethe door length, automatic belt to take away chips and waste material, Technical Data Maximum working area. With one operating unit, 2.700 mm x 1,700 mm, Stroke of axes: X= 2.700 mm Y= 1.700 mm Z+ 1.250 mm, Maximum workable dimensions of finished doors, 2.400mm x 1,250mm Stock Number: L-1-238 Framing or crating will incur additional charges. If needed. Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported
SCMI Moulder/ 5 Head Model# Superset 23 Completely Reconditioned by SCM Technician All new spindles. Bearings, belts FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fc88e9e8c-0x102-
Brand: SCMI Model: 22S-4 Condition: As Taken From Service Stock Number: G-2-157. Specifications- 3 Phase. 480V, Serial Number: 71947 Feed Wheels have been upgraded to a variable speed drive. All spindles have had the bearings replaced in the last 6 months 4 Head(B-R-L-T) working capacity 8-5/8” x 4-11/16” Head Sequence Bottom 9 HP motor. Right/left 12HP motor and Top 12 HP motor Sound insulation hood and dust hoods. Back panel is not shown in the pictures but it is included Manuals are included Framing or crating will incur additional charges. If needed. Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if ... moreitem is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee, if required. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Please s
Up for consideration is my MiniMax CU300 SMART combination machine with all the bells and whistles included and some extras! I am a furniture builder in a one man shop in Charleston. SC and I have out grown my current equipment and I am looking to go to the next level of larger equipment. You can find my stuff at This machine is in perfect working order and has served me very well the last 2 1/2 years and I am the only owner and I did buy it brand new from SCMI outside Atlanta. GA. T he street price of these are about $13.000.00 curently and you could probably talk them down to $11,500 or $12,000 plus shipping and tax, of course! This is a serious piece of equipment and can perform just about any woodworking/furniture making task you coud dream up to through at it! At the heart of this Italian made machine are 3- 5Hp industrial induction ... moremotors that power the 5 functions. 1 motor for the slider. 1 for the shaper, and 1 for the jointer/palner horizontal mortiser This machine has the following machines built in: 1- Sliding table saw with scoring unit: 12" blade capacity with standard 5/8" arbor. 3/4" dado capability, 5 1/2' cutting capacity, 1 large table and 1 small table both capable of mitering, 30" rip capasity and high low rip fence, and 4 flip stops and more. 2- Shaper: 5Hp shaper complete with 1 1/14" spindle independent fence and hold downs. It works in conjuntion with the sliding table so you essentially have a shaper with a sliding table. It has a reversable motor as well. 3- 12"Jointer: 12in jointer with 60" tables and fence. All individually adjustable and very precise. It has a 300mm 3 knife Tersa cutter head which is self setting and the knives are reversable. I am including extra knives and the ones on it still can be flipped. 4- 12" Planer w/digital readout: Shares the same cutter head and motor as the jointer but I added a digital read out for very precise height adjustment. 5- Horizontal Mortiser: One of the best features on this machine! It features an
A ll Five for the Price of One SAVE BIG BUCKS $$$$$ SCMI Sigma 65C Front Load Automatic Panel Saw SCMI K208 Edge Bander Machine SCMI Industrial Tech 80 Wood Working CNC Point to point 3 Axis PLUS PLUS 2ea. Portable dust collectors Condition: USED/GOOD Location: Warehouse Original Cost: $ 130.000 Plus. Description Wood workers here is the opportunity to ow n 5 impo rtant pieces of equipment for your sh op for the price of o n e. These units were pulled from a working cabinet manufacture that closed. The dust collectors need new bags. But the collectors are almost new. The equipment is ready to make some money. Have any questions. Give us a call. 787.642.6698 PDF LINK: http:www.maschinensucher.de/dokumente/1053579.pdf Please observe the pictures as a reference to the condition of this unit. If you have any questions. Please do not hesitate ... moreto contact us. Payment Methods We accept Pay pal. Corporate checks, wire transfer, Certified/manager checks. Checks must clear before item leaving our warehouse. Shipping Marine freight only because of the size of the units. All five units w ill fit in one container. Please contact us prior to purchase to discuss shipping method and final destination to deliver the item. Shipping to east coast approx $1400.00. West coast approx $3200.00 We will advise a shipping quote once we have a physical address. Returns"As Is" SCMI K208 Edge Bander Machine + SCMI Sigma 65C Front Load Automatic Panel Saw + SCMI Industrial Tech 80 Wood Working CNC P.T.P. 3 Axis
1998 SCMI Hydro 3200 Sliding Table Saw 10' Price: $4.000 OBO ALI Reference#803030 ALL BUYERS PLEASE READ ABOUT US: AssetLiquidity International. Inc. has specialized in Asset remarketing ofRepossessed and End-of-Lease Bank-Owned equipment in North America. PAYMENT: PAYPALaccepted only on purchases under $500. All sales over $500 are strictly paid via certified bank check or BankWire Transfer. Any fees not charged by the seller but related to the sale arethe buyer's responsibility. Customs fees. Duty, bank wire fee, exchange fees,local taxes, etc. Payment shall be made within 3 days of agreed upon sellingprice. ALL PAYMENTS MUST CLEAR PRIOR TO PICK UP OR DELIVERY OF ANY ITEM. SHIPPING: Unlessexpressly outlined in the sale listing. All sales are pick up only, all riggingand freight is an extra cost and is the buyer’s responsibility. ... moreTERMS: This item(s)is available for inspection and is sold As-Is. Where-Is. All sales are final. All information statedis to the best of our knowledge. Thesemay be inconclusive or incomplete and not guaranteed. Buyer is responsible for confirming allstated descriptions, condition statements, operability, inventory andspecifications. Please, read the description carefully and if some info ismissing or unclear, please, contact me with any questions prior to making anoffer. All sales are final; no refunds, no warranty is expressed or implied. CONTACT: Pleasecontact me at your convenience with any questions before the sale.
SCMI SI320 Sliding Table Saw General Info: Stock# 5134602 Condition: Used. Unit is in good working condition. Tested: Yes Brand: SCMI Model: SI320 Serial: AB090720 Year: N/A Weight: N/A Shipping Dimensions: N/A Specifications: SCMI SI320 Sliding Table Saw with 10' sliding table adj. rip fence with 60" rip cap. Material hold down clamp overhead saw guard. 9HP arbor motor separate scoring motor non tilt saw arbor(Handle Broke off. Needs to be fixed) wired 230V. 3PH. Machine No. AB090720 Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
SCMI Olimpic K201 Edgebander 2007 2mm Capacity Semi Automatic Magazine. Category: Wood Working Sub Category: Edge Bander Stock No. 4936 Age: 2007 Location: Fullerton. CA. Capacity 2mm Feed Track 33 FPM Tiltable Top& Bottom Trimmers 0-10 Degrees Top& Bottom Copy Wheels T/B Trim Unit Electrical Requirements 220V/ 1-PH Single Motor. Double Blade, Tiltable End Trim Unit Pneumatic Tilt of the End Trim Unit Semi Automatic Magazine Approx. Dimensions 98" x 38" x 50" Approx. Weight 1.200 lbs. Price… $9.500.00*Bank REPO*Make Offer* Subject to Banks Acceptance and Release* PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ... moreACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 10 business days until check clears. ACT Inc. accepts all major credit cards with a 3% Surcharge: Visa. Master Card, and American Express. We also accept Pay Pal as payment of goods purch
SCMI Olimpic K300E Automatic Edgebander 2008 3mm Capacity Automatic Strip Magazine Category: Wood Working Sub Category: Edge Bander Stock No. 4979 Age: 2009 Location: Fullerton. CA. Capacity 3mm Feed Track 33 FPM Tiltable Top& Bottom Trimmers 0-25 Degrees Electrical Requirements 230V/ 3-PH Single Motor. Double Blade, Tiltable End Trim Unit Pneumatic Tilt of the End Trim Unit Automatic Strip Magazine Two Motor Tiltable Buffing Unit Single Motor Corner Rounding Unit Approx. Dimensions 108" x 48" x 50" Approx. Weight 1.500 lbs. Equipped With: Glue Pot Unit. End Cutting Unit, Tiltable Top& Bottom Trimming Unit, Edge Scraping Unit, and Buffing Unit. Price… $17.000.00*Bank REPO*Make Offer* Subject to Banks Acceptance and Release* PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions ... morebelow and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 10 business days until
SHIPPING IS NOT"$1.00" EBAY IS NOT SET UP FOR FREIGHT SHIPPING IN THE SELECTION. WEIGHT IS LISTED BELOW AND NOT 1 POUND. IT WILL DEPEND ENTIRELY ON THE BUYERS CHOICE OF OPTIONS. PLEASE SEE THE NOTE IN THE SHIPPING BOX. THANKS! WE WILL DEFINITELY SELL INTERNATIONALLY BUT YOU MUST CONTACT ME DIRECT FIRST THROUGH THE MESSAGING OPTION TO ARRANGE TO DO SO! OVERSEAS SALES ARE WELCOME BUT YOU HAVE TO DEAL WITH DROP OFF TO CONTAINER SHIPPER'S AND LOADING AT DOCK SIDE. I CAN ONLY LOAD OUT OF THE WAREHOUSE. IF YOU ARE LOCAL WE CAN PROVIDE LABOR FOR BOTH LOADING AND UNLOADING(DELIVERY WILL BE A FEE) NO CREDIT CARD PAYMENTS ACCEPTED ON THIS ITEM DUE TO THE AMOUNT AND THE COMMON USE OF CHARGE BACKS TO GAIN POSSESSION OF MATERIALS WITHOUT PAYING FOR THEM. THIS HAS HAPPENED MANY TIMES TO ME ON EBAY AS THERE IS NO SELLER PROTECTION DESPITE ... morePROPAGANDA TO THE CONTRARY. I WILL ASK FOR A COPY OF THE PAYPAL PAYMENT PAGE TO VERIFY NON CREDIT CARD PAYMENT OR WE CAN ARRANGE DIRECT PAYMENT. SPEFICIATIONS/DATA SCMI IS A WORLD RENOWNED ITALIAN WOOD WORKING MACHINE MANUFACTURER. THERE ARE SERVICE OUTLETS THROUGH OUT THE USA. SCMI IS CONSIDERED ONE OF THE BEST BUILDERS OF WOOD WORKING MACHINES AND HIGHLY DESIRABLE. THIS SCMI LINER BORING MACHINE HAS#36 HEADS THAT ARE PNEUMATICALLY ACCUATED AND MOUNTED. THEY ARE IN A SINGLE ROW BUT THE HEADS CAN BE ROTATED 90 DEGREES TO DRILL BOTH VERTICAL HOLES FOR SIDES OR FOR DOWELING. AND HORIZONTALLY FOR SHELF HOLE DRILLING. THIS MAKES CHINA CABINET AND CLOSET SIDES EASY TO MAKE WITH ONE SINGEL DRILL ACTION. THERE ARE 4 PENUMATIC HOLD DOWN OVER HEAD CYLINDERS(SEE PHOTOS! FOOT PEDAL ACTUATION OF DRILL HEADS, 230 VOLT, 60 HZ, GOOD OPERATIONAL CONDITION FOR DRILLING MULTIPLE IN LINE HIGHLY PRECISE DRILL LINE HOLES. OVER 10 GRAND NEW. USED USUALLY GOES FOR 3 GRAND OR MORE. YOU WILL NEED TO BUY NEW DRILL PNEUMATIC CHUCK COLLETS AND BITS FOR THE UNIT. NICE CONDITION, PAID $3000.00 SELLING FOR $1500.00 OBO THE USA EQUIVILANT MACHINE WOULD BE THE RITTER 46 VH MODEL. Cosmetics/Operation It has sturd
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! FOR ALL QUESTIONS PLEASE CONTACT US WITH ANY QUESTIONS 925-872-0929 OFFICE CSWAFFORD925@GMAIL.COM THIS MACHINE HAS PASSED AN ALL POINTS INSPECTION AND READY TO SHIP! Used Scm Sandya 15 M3 110. 43" Triple Head Sander. First head roller, 2nd head roller, Combi on the 3 head. 230 v, ser# AE/026320 Rating: Very Good Payment terms cash check credit card bank wire Contact Information: 925-872-0929 Cswafford925@gmail.com Financing Available Payment Methods: Visa. Mastercard, Amex, Check, Cash Location: California Please contact for Terms and Condition We offer no warranties on the sale of used equipment. However. We do guarantee that the machine will be in good working condition upon delivery to your facility. We will ship Via Air Ride Flat Bed. Across the entire United States, ... moreand Canada. International Shipping as well. Please contact us for a freight rate. Auction Bid does not include Shipping Price, or Sales Tax if Applicable. On Nov-15-09 at 10:04:49 PST. Seller added the following information: On Aug-03-10 at 12:47:12 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio!
Item: SCMI 32 HORIZONTAL PANEL SAW WITH DUST COLLECTOR Condition: Very Good.WORKING CONDITION Description: 10" blade early 90's Will Include Murphy Rogers dust collector 10A with 4 bags Works Great CLICK HERE TO WATCH VIDEO of machine in action If interested or if you have any questions. Please contact Curt 402-510-3574 Our Inventory We currently offer hundreds of items for sale due to overstock. And overproduction at our warehouse. This gives the consumer an opportunity to shop for bulk and business-related items conveniently, and allowing us to liquidate our inventory. Items change frequently and are limited to the quantity on hand. If you don't see it.ASK.We might have it! PARDON OUR DUST.Regardless if the items are listed as new or used. we manufacture many items made of wood. So dust is in abundance in our warehouse.we DO ... moreclean/dust all our items before shipping, however, just wanted to let you know in advance in case, WE Missed a Spot! If condition is stated as"stored" condition. The item may or may not be new and may or may not show signs of storage"ware. Please ask questions before bidding to avoid any confusion after you win/purchase the item. Seller has the right to end auction early if the item is sold locally. We make every attempt to ship item within 4 days of confirmation of payment(excluding Saturdays and Sunday. We ship our items UPS Ground. Which we have found is the most cost effective way for the buyer. Please allow 4-10 days for delivery from DATE OF PAYMENT CONFIRMATION Payment instructions are as follows: All items must be paid for within 7 Days after item is closed. We take paypal and payment in person(if item is being picked up locally. Buyers need to notify us in advance of their intentions to make payment on pick up. All payments must be verified before item is shipped. Please expect 7-14 days for delivery. Unless prior arrangements have been made Returns are accepted if item does not work or is grossly misrepresented. All items are tested; unless otherwise sp
Thi s au ctio n Is for My M iniMax S cmi ME-30 Edg eband Year 2003 Very clean machine I n excellent working condition. It has Been in my shop for 7 year s, Never had any is sue at all. Free d e livery with in 150 miles.After that buyer p ays for shipping I would be glad to answer any Qu estions you have call James 660.438.9200
SCMI Sigma 65C Front Load Automatic Panel Saw Condition: USED/GOOD Location: Hatillo Warehouse Original Cost: $88.000.00 Description T his unit is ready to go to work. The item was pulled from a working cabinet manufacturing facility that closed. The unit is ready to work. TECHNICAL SPECIFICATIONS Cut size mm 4500x4300 Slotted presser beam Main blade projection mm 65 Main blade diameter mm 300 Main blade motor KW 7.5 Scoring saw blade diameter mm 160 Scoring saw motor KW 1.5 Pusher speed 12 m/min Saw carriage feed speed m/min 13-27 Number of grippers 6 Grippers opening mm 60 Pneumatic side aligner PDF LINK: http:www.maschinensucher.de/dokumente/1053579.pdf Please observe the pictures as a reference to the condition of this unit. If you have any questions. Please do not hesitate to contact us. Payment Methods We accept Pay pal. Corporate checks, ... morewire transfer, Certified/manager checks. Checks must clear before item leaving our warehouse. Shipping Marine freight only because of the size of the unit. Please contact us prior to purchase to discuss shipping method and final destination to deliver the item. We will advise a shipping quote.
cms 4632 Edgebander w/Return Manufacturer: SCMI Model: Olimpic S212 YMFG: 2001 Condition: As Taken From Service Location: NC-CMS Warehouse Price: $16.000 Thickness capacity: 0.4-12 mm. 3 mm PVC capacity, Hot melt glue system, Guillotine for PVC, Double motor end trim, Top and bottom flush trim, Top and bottom PVC scrapers, Top and bottom buffing, Includes: Doucet return conveyor, This unit has been removed from service and is ready to load. The return conveyor is included with the bander. Contact: Ralph Viegelmann 704-288-1904 x 101 link to machine:
A Solid. Smooth, heavy duty shaper. 5 Speed, 7 1/2 HP 240V 3Phase Motor. Feeder has 8 speeds. App. 1475 lbs. Main Table is 28.75" x 47" Includes Infeed and Outfeed extensions, total table length is 10 Feet! Storage cabinets with a total of Nine 20" x 28" Drawers. Includes wrench for changing spindles.
SCMI Industrial Tech 80 Wood Working CNC Point to point 3 Axis Manufacturer: SCMI Industrial Tech 80 Wood Working CNC Point to point 3 Axis Model: Tech 80 Dimensions: 140" X 55" X 85" Status: Used. Pulled, Good Item# Location: Weight: 2000 lbs. Description H ere is the opportunity to ow n an impo rtant piece of equipment for your sh op. This unit was pulled from a working cabinet manufacture that closed. The equipment is ready to make some money. Have any questions. Give us a call. 787.642.6698 PDF LINK: http:www.maschinensucher.de/dokumente/1053579.pdf Shipping Marine freight only because of the size of the units. Shipping to east coast approx $1 1 00.00. We will advise a shipping quote once we have a physical address. TESTING& FUNCTIONAL NOTES: This item was pulled from a working environment. Please note that there are ... moreseveral cosmetic flaws. That do not affect the funcionality of the unit. The item is functional and is Guaranteed Working! Buy with confidence! REPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from Reuso.Com. It should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 14 Days days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. COMPONENTS INCLUDED IN THIS AUCTION: 1 ea. SCMI Industrial Tech 80 Wood Working CNC Point to point 3 Axis Unless stated otherwise. Accessories such as Power Cords, Software, AC Adapters, and/or other Cables are not included. Buy it now and save $$ Big BUCKS $$ Payment Method Items over $3000.00 we require wire transfer. Corporate check or agreed to payment method. Lower cost items we accept paypal and corporate checks. If your a walk in customer ATM or debit card is fine. Local sales will be charged 7% Sales Tax. Shipping Method Item will be shipped by any shipper the auction winner desires. If item does not include shipping. We normally use Magic Transportation of Jacksonville F
SCMI"T-110" SHAPER Cleaned. Checked, Rebuilt Spindle, Good Running condition 6.6 HP Motor. 1-1/4" dia. spindle(5) spindle speeds of 3.000- 4,500- 6,000- 8,000& 10,000 RPM 39" x 25" Table. 13.4" max. insert opening(4) table insert rings; 6-1/8" working height under nut Magnetic controls Foot brake Reverse rotation switch Dust outlet Machine can be loaded at no charge. Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Subject to Prior Sale. This item ... moremay be withdrawn from sale at any time as it is listed on our website and in other advertising. TERMS: Immediate Payment with order. Full payment or deposit is required within 24 hours of purchase. After 1st seven days. If no payment or deposit is received, item will immediately be reported to eBay as unpaid. Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-140714ffc51-0xf4-
Up for bid is a SCMI 24" thickness planer model# S630. I switched the voltage to 208/230 3 phase so I could test it as I don't have 460 volt in my warehouse. Which the machine was wired for before I changed it. It runs smooth and quiet for a planer this size. The only thing I couldn't get to work was the digital height gauge, which I think will take moving a wire on the transformer. It still goes up and down and height can be read by the gauge on table. There's even an alarm or sensor that will not let you move the table too high at one time so you don't get your board stuck. Here are a few more specs. Model- S630 Matr. AB/103913 Ref. 101218 Comp. R034302 N. 009201 KG. 00938 V. 230/460 3 Phase HZ- 60 Made in Italy Year- 1996 Weight w/ Skid- 2217 lbs. Mach. Dimensions- 50" x 40" x 45" tall Rear stop switch ... morehas been broken off. The stop button cover in front is missing. But still functions fine. The gas shock that holds lid up safely needs replacing. The foam in the lid is deteriorating and should be replaced. The rubber boots that protect the 4 table screws need replacing. There is no manual. But I have the electrical schematic manual. This an extremely heavy-duty planer and can be put right to work. If you are needing a big professional planer then don't let this get away. Make sure to look at the other woodworking machinery currently for sale. I prefer this to be picked up and I will load on your truck for free. If you want to ship please make your own arrangements. But if you need help in this area, just ask. If it is going to be shipped I charge $40.00 for palletizing. If you have any questions you can reach me at 618-559-6011 and ask for Andrew or leave a message and I will get right back to you.
SCMI T130N Shaper Profiling Tool- Construction year 2000. Great condition with manuals and tooling. 230V 60HZ 505kg
SCMI Olimpic K-208 Edgebander Model: Olimpic K 208 Year: 2005 Voltage: 230V. 60 cy, 3Ph. See all specifications below. FUNCTIONAL GUARANTEE. WE DO NOT SELL MACHINES THAT DO NOT RUN! 100% positive feedback! This is a great machine and can be seen and inspected under power! Machine Specifications: 5/16" 8mm) edge capacity 1-3/4" max banding height 2-3/8" min. panel width& 6-1/4" min. length Automatic strip& coil feed magazine Teflon coated glue pot(10 minute heat up time) upgraded heavy-duty 3mm PVC cap. guillotine 3-Roll pressure section with pneumatic control Double motor end trim 0.3 HP 12.000 RPM each tilts 0-15 degree end trimmer mounted on 45 degree THK guide top& bottom flush trims(0.8HP-12.000 RPM each) bevels 0-15 top& bottom buffing unit(0.33 HP 2.800 RPM) Single 42 FPM fixed speed 1HP Drive Microprocessor ... moreline control& glue temp. can store up to 50 preset programs swivel control panel pneumatic positioning for super finish full cover(sound enclosure) 200 Cy 5kw frequency converter Contact Pro Tech Machinery for more details! While we do not offer extended warranties on the sale of used equipment we will guarantee that all major functions of this machine will be in working order upon pick up. SAFETY DISCLAIMER- Buyer/Purchaser fully understands that the possession and operation of any industrial equipment or machine has inherent dangers and safety requirements. Buyer/Purchaser agrees that he/she has complete working and operational knowledge related to this item. As it relates to safety guards, rotating parts, cutting tools, electrical shock, safe operating speeds, and any other components of the machine, present or missing. Buyer/Purchaser agrees to hold Seller and his agents harmless from any injury or tort resulting from the operation or possession of this item. Shipping is not included but quotes are available upon request. We will ship via air ride flat bed across the entire United States and Canada. International shipping is also available. Be sure to check ou
scmi 600 vertical band saw 15ft blade very good condition
SCMI(Sandya UNO RCS) 36" Wide Belt Sander 2 Head- Grooved steel head. Rubber covered contact head. Motor- 24 hp. Dual belts- 37" x 60" with eye tracking and pneumatic belt tensioning. Automatic part thickness adjustment. 230 v 3 ph. Used but in good condition. Needs a new start knob/ switch. Operational manual is included. Item is for pick up only. Can ship freight at buyer's expense.
Routech Twin Table CNC Router Model: ROUTOMAT 2 P Voltage: 480V 60cy 3 Phase Year: 2000 See all specifications below. Hard to find machine in this condition with these options! FUNCTIONAL GUARANTEE. WE DO NOT SELL MACHINES THAT DO NOT RUN! 100% positive feedback! Call to schedule demo today! Machine Specifications: Twin 61" x 61" moving tables operate independently or slaved together slaved together total work area is 61" x 122" vacuum bed is machined phenolic table in square pattern table can be used to fixture parts or vacuum pods or closed cell rope gasket material extra heavy duty fixed gantry bridge Equipped with(2) 10HP HSK-63F Electrospindles(2) 10 position tool carousels(2) 5-spindle. 2HP in-line piggyback 32 mm boring unit in Y-axis programmable spindle speeds of 900-18.000 RPM Minimum variable spindle spacing ... moreof 16.5" closed loop servo drive system with precision ground ball screws for positioning 1.755 Inches Per Minute max positioning feed rate all axes ride on extra large contour linear guideways Includes(2) 10 HP Becker Vacuum Pumps assorted tool holders with collets and documenation Contact Pro Tech Machinery for more details! While we do not offer extended warranties on the sale of used equipment we will guarantee that all major functions of this machine will be in working order upon pick up. SAFETY DISCLAIMER- Buyer/Purchaser fully understands that the possession and operation of any industrial equipment or machine has inherent dangers and safety requirements. Buyer/Purchaser agrees that he/she has complete working and operational knowledge related to this item. As it relates to safety guards, rotating parts, cutting tools, electrical shock, safe operating speeds, and any other components of the machine, present or missing. Buyer/Purchaser agrees to hold Seller and his agents harmless from any injury or tort resulting from the operation or possession of this item. Shipping is not included but quotes are available upon request. We will ship via air ride flat bed across the
FOR SALE IS A 1989 SCMI COMPACT 22 MOULDER. IT IS IN VERY GOOD CONDITION ALL ITEMS FUNCTION AND WORK PROPERLY. ITEM COMES WITH ALL ELECTRICAL PANELS. WE MADE SIDING ON THIS MACHINE AND IT WORKED WELL. ALL HEADS AND KNIVES ARE INCLUDED. HERE ARE THE BASIC SPECIFICATIONS: 1. ELECTRIC IS 230V 60 CY 3 PHASE 2. 4 HEAD(B-R-L-T) WORKING CAPACITY 8-5/8"X4-11/16" 3. HEAD SEQUENCE. BOTTOM 9 HP RIGHT/LEFT 12 HP MOTOR AND TOP 12HP MOTOR 4. SPINDLE DIA 40MM WITH CUTTERHEAD SPEED OF 6.000 RPM. 5. VARIABLE FEED SPEED 14 TO 72 FPM WITH A 2HP MOTOR 6. COMPLETE WITH 2M INFEED STRAIGHTENING TABLE. SOUND AND DUST HOODS. THERE ARE SOME LIGHT BULBS BURNED OUT IN THE CONTROL PANEL THAT ARE EASY TO REPLACE. THE SOUND AND DUST HOOD NEEDS A NEW AIR PISTON TO HOLD IT UP IN PLACE WHEN BEING LIFTED TO WORK ON THE MACHINE. THAT IS IT AS FAR AS I KNOW. REPLACEMENT ... moreCOST OF THIS MACHINE NEW IS APPROXIMATELY 40.000. BUYER IS RESPONSIBLE FOR MAKING RIGGING AND SHIPPING ARRANGEMENTS. THE MACHINE IS SOLD AS IS FOB OUR FACILITY. WE HAVE A FORK LIFT AVAILABLE FOR LOADING. THE MACHINE HAS NOT BEEN USED IN WELL OVER A YEAR. WE HAVE KEPT IT UNDERCOVER SINCE THAT TIME. IF YOU HAVE ANY QUESTIONS YOU CAN EMAIL ME AND I CAN CALL YOU.
spindle tilting-5 to 45 deg.vertical spindle adjusting 170 mm.5 speed,motor power 6,6kw,230v 3phase,sliding table,1'1/4 spindle SECURED WARRANTY!SECURED WARRANTY! SECURED WARRANTY! ONE YEAR. YOU PAY 80%NOW AND 20% AFTER 1YEAR.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141448a8e33-0x105-
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES SCMi Gang Rip Saw Model No: M-3 Year: Not Available Condition: Excellent Rating: 3) Used/Tested Apx. Replacement Cost: NOT AVAILABLE Technical Specifications: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false ... morefalse false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE Mi
SCMI Widebelt Sander-Just Arrived! Model# Sandya1Uno Serial# AE/010268 FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14197d4f8ef-0xfe-
SCMI vertical router. I am not familiar with these machines but your are welcome to inspect in my Aberdeen. NJ shop by calling 917-974-7381. NJ and NY residents must add sales tax or provide a vald exemption. PLEASE CHECK MY OTHER ITEMS.
SCMI 42 spindle vertical boring machine. with option for 21 horizontal holes. good working condition. pneumatic hold down and stops. 4 stops with space for a 5th. one of the adjustment handle has been modified to take a wrench. extra set of new right and left hand bits. a few spare parts. I think I still have a manual for it somewhere. would prefer customer pick-up but will consider arranging for freight shipping. would also consider drop off in NC. SC, Va, or WV. please serious offers only. ask lots of questions. we are getting out of the wood business and will be listing more industrial wood working tools this week. ASK QUESTIONS EARLY IN THE BIDDING I WORK 4am-4pm. SOME TIMES LATER SO IT MAY TAKE TIME TO ANSWER YOUR QUESTION. I don't add anything on to shipping cost only what they charge me so if shipping looks to high please don;t ... morebid.I will refund any major difference in shipping between what ebay says and what it really costs. if your not happy with your item please return for a full item cost refund. no refund on any shipping. item must be in as sold condition if in shrink wrap it must still be in shrink wrap ect. Paypal only! please pay within 4 days of end of bidding. no shipping to unconfirmed addresses too many problems. thanks C
used condition. This is for unbolting and tightening molder heads on a scmi molder, other tool is for adjusting settings on same molder, I am sure it could be used for other molder brand heads and machines, sold as is no returns, for sale locally so I reserve the right to end early if sold locally,
good working condition. This is for calibrating heads on a scmi molder 5 head wood working machine, mitutoya digital calibrater is about 3 yrs old, I am sure it could be used for other molder brand heads and machines, 9 inch tall heads maximum, sold as is no returns, for sale locally so I reserve the right to end early if sold locally, very heavy so expect to pay for shipping, I will adjust shipping price depending on carrier
SC MI T 130-N Heavy Duty 9HP Shaper with Power Feed General Info: Stock# CB-13100 Condition: Used. Good Tested: Yes. Good Working Condition Brand: SCMI Model: T 130 N Serial: AB.72027 Year: N/A Shipping Weight: 1500 Lbs. Shipping Dimensions: 68" L x 42" W x 78" H Location: Stone Mountain. GA Specifications: 1-1/4" Diameter Spindle. 9HP Motor, 230V, 3Ph, 5 Spindle Speeds at 3000/ 4500/ 6000/ 7000/ 10000 RPM Speeds, 47" x 28.5" Cast Iron Table, 4" Dust Outlet, Forward/ Reverse Switch, Foot Brake, Spindle Lock, 3 Roll Samco Mini Max Power Feed, Cord& Plug. Additional Info: Shaper and Power Feed has been tested and both are in good working condition. Comes with miscellaneous accessories such as wrenches. Blade guard and other items shown in photos. Seller Contact Information: Mark Davis 404-272-1285 The ... moreEquipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14206c45586-0xf3-
More woodshop machinery photos at this link: http:www.pleasantstmachinery.com/ and a few videos here too and short youtube clip of 12 inch Powermatic Jointer here: https:www.youtube.com/watch?v=UxHpUNMhi-o Powermatic FS305 12 inch jointer. Made by SAC Italy. Parallelogram- type lever for raise/lower infeed. Works smooth. Longbed 50 inch infeed, 40 inch outfeed. Large cutting radius 4.5 inch 3knife cutterhead. Heavy european style fence, tilting 6x40 inch. Runs very well, needs some fingers at cutter head block replaced. Wired 230v 3phase. We can install disposable knife system for small extra cost. Knives are sharp with no nicks. Sold used. Tested, ready to run and cut wood. If you want a rebuild. We will replace bearings and belts, update electricals, install new knives, and adjust the bed to level within a few thousandths(most manufacturers ... moreship new at about 10 thou. freight should be about $225-$375 to a business address. $35 fee to band to standard pallet 42 inch x 96 inch wide x 40 inch tall, approx wt. 1200 lbs, SHIPPED F.O.B. from 60115, no charge to load a flatbed or your own truck with no pallet Email us your business zip and we will get a freight quote. We do not mark it up if you pay direct to freight companay(at our discounted rate! we enjoy visitors by appointment in our 20.000 sq foot workshop 60115, please phone first(815)758- 6534 More woodshop machinery photos at this link: and a few videos here too We specialize in solid wood processing machines. Share extensive rebuild knowledge, and stock 20,000 sq. foot of used machines. You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as used equipment rebuilders and dealers, to help you choose the right woodworking equipment for your shop. We have been serving skilled craftsmen, world-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt woodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Thanks fo
This is a SCMI Vertical band saw. I measured a 33" platform cut. You can come and try it out. Mod 900. Set up for a 220v connection. Pick up only- we can assist on loading. If you need more information/ pictures please email or call(904) 424-9773.
THIS SAW IS IN PERFECT RUNING CONDITION AND CAN BE INSPECTED IN CLEARWATER FLORIDA UNTIL DEC 29.2013, COMES WITH 5 HP DUST COLLECTOR. APPRO 12 FT X 12 FT X 6 FT, WEIGHT 9800 LBS. IF YOU HAVE ANY QUESTIONS CALL GERRY AT 727-547-0616.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143166fa859-0xf0-
SCMI 22" Bandsaw Model No. 600SC 22" Throat 13" Resaw Capacity 3 HP Motor 220/440 Volts(currently wired 220) Tilting Table Sliding Fence Miter Gauge Telescoping blade guard Tension Gauge Foot Brake Rack& Pinion Guide Post adjustment More info on this saw is available at
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ SCMI T110 SHAPER& 3 ROLL POWERFEED SCMI T110i shaper in good condition. 1″ and 1 1/4″ spindles with less than 1/1000″ run out. This shaper is powered by a 6.6hp motor. Multiple RPM spindle with 3.000, 4,500, 6,000, 7,000, and 10,000 RPM speeds. Spindle lock and foot brake are in perfect working order. 3 roll Powermatic 1 hp multi speed power feed with a NEW set of Acrotech urethane wheels. Terms& Conditions: 1. Please ask all questions before bidding. 2. Winning bidder will pay actual freight charges. We do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $50 per $10.000 of coverage 3. Please call(630-229-6705) ... moreor email( info@360degreemachinery.com) us for full freight options. There will be an additional $100 crating charge on this item if shipped common carrier to protect against theft and damage. 4. Illinois transactions must add 7.25% sales tax unless tax exempt. 5. Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with zero mark up. We also have third party insurance available at a rate of $40 per $10.000 to protect against freight loss/damage.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1432e261ee9-0x103-
SCMI Mimatic Tool Systems Prod- Nr 13.1711.0264.211.3 Serial-Nr 50091 Aggregate Head for CNC Router- Spindle only Excellent condition. Hardly used
profile grinder operating manual. Scmi woodworking moulder manual with electrical diagrams, maintenance section, optional units section, general info, sold as is no returns.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1432f77631a-0xeb-
Scmi top works great used everyday new cnc has made this machine unneeded Posted with
We are offering a USED SCMI Pin Router, Model R9 Spindle Motor: 6.6 kw(approx. 9 hp) Throat Depth: 36” Floating Head Serial#A41/001003 Voltage Requirements: 220 volts. 3 ph Please email any questions. Reasonable freight rate may be available into parts of California and Nevada. Thanks for Looking!
Up for Sale is this: Preowned SCMI HYDRO 3200 SLIDING TABLE SAW Unit has a 16" blade capacity. 9hp. 3 phase 230v/460v wired 230v motor. Unit also has a 1hp, 3 phase scoring motor with blade. I have attached a picture of the units specifications. We are the original owner of this saw. This saw had a price of $15,970 when it was purchased. We received a trade show discount of $2,000 so our total was $13,970. We also purchased the air assisted press bar to use with the scoring blade for an additional $1,000 installed. We ended up paying $14,970 for the full package. We have had multiple saws and edge banders in our shop and this table saw truly has been excellent to us. It has never broken on us or given us any problems. We are sure you will be very satisfied with it. Unit is located in Miami FL. Where you may come see and inspect for yourself. ... moreWe can also ship to you, with some parts disassembled of coarse if you are out of state. Unit will ship on a pallet and Insured. Paypal is the safest form of payment for both of us. If paying by Paypal you must add 3% of final selling price to transaction. Other methods accepted as well. Sorry. All credit card payments must be done through Paypal. We accept returns only if item was damaged during shipment or not as listed/pictured. Return shipping is buyers responsibility so please make sure item fits your needs. What you see pictured and listed is what you will receive in those same exact conditions. We have all manuals and paperwork for unit. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1-3 days after your payment is received. Any questions feel free to call me at 305-303-9822
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 SCM- Panel Saw SCMI 65 Bought new approximately 2001. Was in use till we closed our plant in June 2013. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Front Loading-Computer Controlled 12HP Main Motor-2HP Scoring Motor-Wired 230 Volts THREE PHASE In excellent working condition. 126" Saw Travel-126" Max. Crosscut Buyer responsible for dismantling. Removal and pickup Wt. approx. 8000 lbs. All sizes and weights are approximate. Payment by Money order or Cashiers check are subject to clearing before item can be picked ... moreup. We have closed our Dallas. Texas plant and will have a large number of machines and tools for sale so keep looking at our offers to few more equipment. 35.000.00 All sales are final. Sold as is.
Used SCMI T110 Shaper in Excellent condition. 230V 3 Phase 1 1/4" Spindle 4 Table Inserts 5 Speeds:3000. 4500, 6000, 8000 and 10,000 rpm Table drilled for power feeder mount. Foot operated spindle lock Includes wrenches and extra drive belt(new) Weight: 600 lbs. This model did not include forward/reverse switch. Keyed spindle and bushing allows machine to be wired to cut either direction. After-market electro-mechanical Forward/Reverse switch can be easily installed. Wood Werks Supply is a full service woodworking machinery and supply dealer. Please phone us at 847-526-1411 for more info about this mach or any of your other woodworking needs. Local Pick up recommended! Forklift loading onto/into your trailer or truck is available at no charge. Other shipping and crating will incur extra charges. USA Bidders Only Powered by The free listing ... moretool. List your items fast and easy and manage your active items.
SCMI MODEL T100 SHAPER WITH INPUT FEED MOTOR Alternative Views: Our Price: $2.650.00 Status: Used Excellent For more information: Call Gary Stevens at 203-206-3737 or email garys@globalmachinebrokers.com Availability: Usually Ships in 3 to 5 Business Days Item# 11094 This is a brokered item. For more information call Gary Stevens at 203-206-3737. Description SCMI MODEL T100 SHAPER WITH INPUT FEED MOTOR 1.25" SINGLE SPINDLE HEAVY DUTY CAST IRON FENCE 5 HP MOTOR AC INPUT: 220 VOLT. 3 PHASE POWER REVERSING SWITCH SPEED CONTROL SWITCH 5 UNITS AVAILABLE PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until ... morecheck clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred in transit. Local Pickup is always welcome No handling fees for Local Pickup. Any item not picked up within 30 days from End of Auction. Will be charged 10% of items cost per month for storage.