|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$18.40 Shipping Condition: Used Location: Raymond, United States Weinig 40mm Bore 122mm Diameter 150mm Length Moulder Cutter Head. In excellent condition. Not a corrugated cutter head. Made to use William and Hussey ... morestyle knives. Like new!! Over $500 new!!
Buy It Now
$18.40 Shipping Condition: Used Location: Raymond, United States A vintage Wisconsin Knife Works- Badger moulder head in excellent condition! 1 1/4” arbor. Not much info around on these. I think you can still buy tooling ... morefor it. I believe it was used to make doors and windows based on the tooling I received with it. I have boxes of tooling for it if there is any interest in the head. Don’t see these very often!
Buy It Now
$24.75 Shipping Condition: Used Location: Raymond, United States Weinig Hydralok 1 13/16 Bore 6" Diameter 6” Length Moulder Cutter Head 6 Cutter. Great condition. Cost $1000 new. Includes all 6 gibs. Ready to go to ... morework. Make an offer.
Buy It Now
$30.50 Shipping Condition: Used Location: Raymond, United States Zuani 4” Moulder Head. 5” outside diameter. 12mm x 30mm Carbide Inserts. 40mm Bore Size. Condition is Used. In good condition. Carbide can possibly be ... moreflipped 1 more times, but will need new carbide cutters soon! Shipped with USPS Priority Mail.
Buy It Now
$15.53 Shipping Condition: Used Location: Lomita, United States The LRH Magic Molder Set Head MM2 is a cutting tool made in the USA. It comes with two carbide cutters (P-21 3/16") and is suitable for woodworking. The ... moreLRH brand is known for producing high-quality tools, and this product is no exception. Whether you're a professional woodworker or a DIY enthusiast, the LRH Magic Molder Set Head MM2 is a great addition to your toolkit.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States Wisconsin Knife Works Hydro-Lock moulder cutter head1-13/16 Bore, 6" Diameter, 2-1/4” Length20 CA, 16-90 Corr
Buy It Now
Free Shipping Condition: Used Location: Granger, United States
Buy It Now
$24.75 Shipping Condition: Used Location: Raymond, United States My only 3/4” corrugated moulder head for shaper use. Comes with 30 profiles including crown, base, round over, flute, table edge, ogee, and others. Most ... moreof these cutters are smaller and have shallower profiles to be used with this 2 knife moulder head on a 3/4” spindle shaper. If you have any questions please ask. I do have approximately 24 more profiles we used with this head that will be listed later in a separate lot.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States Wisconsin Knife Works Hydro-Lock molder cutter head.
$9.85 Shipping Condition: Used Location: Paradise Valley, United States
Buy It Now
Free Shipping Condition: Used Location: Granger, United States North American Hydro-Lock moulder cutter head1-13/16 Bore, 6" Diameter, 2-3/8” Length20 CA, 16-90 Corr
Buy It Now
$8.23 Shipping Condition: Used Location: Seattle, United States Shaper cutter head, spindle moulder cutter block. Stamped M.B.1.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States Wisconsin Knife Works Hydro-Lock moulder cutter head1-13/16 Bore, 6" Diameter, 3” Length20 CA, 16-90 Corr
Buy It Now
$24.75 Shipping Condition: Used Location: Raymond, United States Terminus insert planer head 140x230x 1 13/16” Bore. Tersa Weinig Moulder. Used needs new blades. Has a couple deep scratches. Good condition overall.This ... moreis a decent looking 1 13/16 head. Please look at my other auctions for more. I believe these sell for over a $1000 new.
Buy It Now
$53.95 Shipping Condition: Used Location: Conehatta, United States 🔥 Titan Molder Head, Straight Bore, Dual Hook 12/20, 137 D x 150 L x 1-13/16 Bore🔥. We've got the perfect tool for you – the Titan Molder Head Dual ... moreHook 12/20! Works with Weinig, Wadkin, SCMI, IIDA, Leadermac, Woodmizer, Silver, and other Mid-Sized Moulders.
Buy It Now
Free Shipping Condition: New Location: Chillicothe, United States We will take care of you! Pet Supplies. Item DetailsINSERT DESC. IMAGES . Specialty Services. Pottery & Glass. Movies & TV. Everything Else.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Weinig Industrial moulder / shaper head There are (3) available at $220 OBO each Brand: Weinig Size: (122x100x38.1mm / 4-13/16”x3-15/16”x1-1/2”)All are ... morein good used condition with plenty of life left to go.See my other listings to view I many more sizes that are available as well as knives for the heads.
Buy It Now
Free Shipping Condition: Used Location: Huntington Beach, United States Came out of a wood floor manufacturer that closed down. These were used in a Seco model SK-523C wood moulder machine. All items are in good used condition. ... moreMay need new knives. Selling all items as-isCheck out my store for more cutting heads.
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Industrial moulder / shaper head There is 1 availableBrand is unknown but serial number is 182443Size: (4-3/4”x2-1/4”x1-1/2”)It is in in good used condition ... morewith plenty of life left to go.See my other listings for more sizes, I have many more available as well as knives for the heads.
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Industrial moulder / shaper head There are (3) available at $200 OBO each Brand: FS-ToolsSize: (122x50x38.1mm / 4-13/16”x2”x1-1/2”)It is in in good used ... morecondition with plenty of life left to go.See my other listings, I have many more sizes available as well as knives sets the heads.
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Industrial moulder / shaper head There are (2) available at $220 OBO each Brand: Weinig Size: (122x60x38.1mm / 4-13/16”x2-11/16”x1-1/2”)It is in good ... moreused condition with plenty of life left to go.See my other listings, I have many more sizes available as well as knives for the heads
Buy It Now
$20.65 Shipping Condition: Used Location: Seattle, United States
Buy It Now
Free Shipping Condition: New – Open box Location: San Ysidro, United States
Buy It Now
$22.51 Shipping Condition: Used Location: Seattle, United States 8" D x 3 13/16" cut x 1 13/16" bore.
Buy It Now
$20.65 Shipping Condition: Used Location: Seattle, United States Leitz 599 Coned Bore 4-knife Moulder/Shaper Cutter Head 122 x 60 x 40 mm.
Buy It Now
$21.53 Shipping Condition: Used Location: Seattle, United States Weing 503 122 02 3/6 4-knife cutter head.
Buy It Now
Free Shipping Condition: Used Location: West Covina, United States Item ID: 540860-31/G/03. Condition Note : Item is Used in Good Working Condition, See Pictures for Details.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
Free Shipping Condition: Used Location: Huntington Beach, United States Came out of a wood floor manufacturer that closed down. These were used in a Seco model SK-523C wood moulder machine. All items are in good used condition. ... moreMay need new knives. Selling all items as-isCheck out my store for more cutting heads.
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Industrial moulder / shaper head There are (3) available at $200 OBO each Brand: FS-ToolsSize: (122x100x38.1mm / 4-13/16”x3-15/16”x1-1/2”)It is in in ... moregood used condition with plenty of life left to go.See my other listings, I have many more sizes available as well as knives for the heads.
Buy It Now
$25.75 Shipping Condition: Used Location: Sodus, United States
Buy It Now
Free Shipping Condition: Used Location: Boise, United States 6 knife, 6 1/2'' head body diameter, 3'' length. This head uses smooth steel or carbide, straight or profile knives. It is mechanical sleeve mounted and ... morethe sleeve bore is 2 3/16''.
Buy It Now
$13.55 Shipping Condition: Used Location: Raymond, United States This Shaper Moulder Cutter from LEITZ is a top-of-the-line tool that is perfect for woodworking enthusiasts. With its carbide insert head and the ability ... moreto create Cove Ogee molding, this shaper is a must-have for any woodworker looking to create high-quality pieces.Crafted in Germany, this shaper is designed to handle a variety of tasks, making it an ideal addition to any woodworking setup. Whether you're a seasoned pro or just starting out, this shaper is sure to deliver the precision and performance you need to create beautiful, professional-grade pieces.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is the bearing set for the Jet JPM-13 planer/molder cutter head.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States Wood moulding machine cutter head. It has slots in the face for splitter knives and it can be used on machine spindles of other sizes, typically 2 3/16" ... moreor 1 13/16", if the proper size sleeves are available.
Buy It Now
$30.50 Shipping Condition: Used Location: Raymond, United States Spiral 4” Moulder Head. 5 1/2” outside diameter. Carbide Inserts. 1 13/16” Bore Size. Condition is Used. In good condition. Carbide can be flipped 1-2 ... moremore times. Shipped with USPS Priority Mail.
Buy It Now
$65.91 Shipping Condition: Used Location: Seattle, United States Demp's Tenoning Cutter Head for a Moulder or Tenoner.
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States Used Leuco moulder cutter head with corrugated tooling#166-723. 8.000 RPM Mechvorssub 021-E 21 180x60x44.5 bore 35mm collar inside. Items used in great ... morecondition showing a little surface rust. Free shipping. Please check out my other auctions.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States Tenoning Cutter Head for a Molder or Tenoner.
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States Used Gladu carbide insert cutter head set. 2-1/8" bore 91486P01 with 9 knives 91486P02 and Cutter 91486M01 with 10 knives 91486M02 9.000 RPM. Items ... moreare in great shape. Free shipping. Please check out my other auctions.
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Industrial moulder / shaper head There are (3) available at $200 OBO each Brand: FS-ToolsSize: (122x100x38.1mm / 4-13/16”x3-15/16”x1-1/2”)It is in in ... moregood used condition with plenty of life left to go.See my other listings, I have many more sizes available as well as knives for the heads
Buy It Now
$57.63 Shipping Condition: Used Location: Midlothian, United States Item includes only what you see in the pictures.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States Wood moulding machine cutter head. It can be mounted on machine spindles of other sizes, typically 2 3/16" or 1 13/16", if the proper size sleeves are ... moreavailable.
Buy It Now
$11.00 Shipping Condition: Used Location: Piedmont, United States Can not tell if it is new or resharpened.
Buy It Now
Free Shipping Condition: Used Location: Wilkes Barre, United States PRE OWNED SHOWS SIGNS OF PREVIOUS USE HANDLING AND STORAGE INCLUDING SCRATCHES MARKS DUST AND NICS. SOLD AS IS AS PICTURED MAY NEED SERVICE PARTS OR REPAIR ... moreIN THE FUTURE.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States DESCRIPTION: USED. WEINIG MOLDING HEAD. IT MEASURES 9 1/16 H X 4 13/16 X 1 1/2 BORE APPROX. IT COMES WITH THE KNIFE LOCKING BARS AND SCREWS. CLICK ON ... moreTHE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA,
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States Used Leuco moulder cutter head with corrugated tooling. Corrugated tooling#FS004434 3904/B Knives#FS004483 3904. 40mm x 170mm x 34.48mm bore no chips. ... moreItems used in great condition Free shipping. Please check out my other auctions.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States Wood moulding machine cutter head. It can be mounted on machine spindles of other sizes, typically 2 3/16" or 1 13/16", if the proper size sleeves are ... moreavailable.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States Wood moulding machine cutter head. It can be mounted on machine spindles of other sizes, typically 2 3/16" or 1 13/16", if the proper size sleeves are ... moreavailable.
Buy It Now
Free Shipping Condition: Used Location: Boise, United States Wood moulding machine cutter head. It can be mounted on machine spindles of other sizes, typically 2 1/8" or 1 13/16", if the proper size sleeves are ... moreavailable.
Buy It Now
$17.07 Shipping Condition: Used Location: Fort Worth, United States We shut down our moulder operation and are selling parts. Used on SCMI machines here. These are 2" heads probably 12/20 degree or close. Check our store ... morefor other sizes
Buy It Now
Free Shipping Condition: Used Location: Boise, United States It can be mounted on machine spindles of other sizes, typically 2 1/8" or 1 13/16", if the proper size sleeves are available.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Split Molding Knife, runs two pieces from ... moreone board. Most of the knives have only been sharpened lightly once so they are practically new.
|
|
|
|
Shaper Moulder Head Profile Knife Wedge Gibb 1 Each 7/16" x 7/8" x 2-3/8"
Shaper Moulder Head Profile Knife Wedge Gibb 1Each. 7/16" x 7/8" x 2-3/8" Versatile for Wood Moulder cutter heads. Wood Shaper cutter heads. The wedge gibb is balanced sized to 7/16” x 7/8” x 2-3/8” The wedge gibb can be cut down edge ground and balanced for use in smaller width cutter heads. I show in my listing several photos of the exact gibb you will receive. I have set the opening bid for this auction well below the replacement Cost of $24.00 for this wedge gib to encourage B idding not Sniping! To discourage snipers I reserve the right to cancel all bids at any time while the auction is live accept during the last 12 hours before the end of the auction. In the future if you need your knives sharpened or a custom set made please contact Wayne@ 941-400-2362 Email: jwjholdings@gmail.com Payment Terms: Payment for all auction ... moreitems is expected via PayPal within 24 hours of the auction end. Auction items remaining unpaid after 4 days from auction end date and time are automatically reported to eBay for collection. PayPal is the only method of payment we accept unless previous acceptable arrangements are made in within 24 hours in advance of the auction end. Shipping: We ship items Monday through Friday weekly using USPS priority mail service. Please understand that as a general rule. We are unable to ship on Saturday but will make exceptions if possible. We ship only to eBay and PayPal verified shipping addresses. Buyer is responsible for all shipping insurance and handling charges on returned items. Combined Shipping Rules: To avoid confusion on my end and maintain the level of service offered I invoice daily each item or items sold. Under no circumstances will shipping be combined for items purchased today with additional items purchased on Any Other Day! Shipping service provided for domestic USPS First Class& Priority Flat Rate for international ONLY! I will only combine up to two(2) gibbs maximum per package due to the weight restriction for USPS First Class packages. The rate charged for
|
|
|
Terminus Moulder Head
This is a near new 9" Terminus head. The head has a 1 13/16 bore and is in excellent condition. The head was bought new from Hermance Machine and thet advertise them now on sale for $895. I have two 9" and two 4" for sale. This auction is for one 9" Any questions call Steve 419-852-1065 Posted with
|
|
|
Five head Diehl Moulder
Five head Diehl Moulder with frequency changer. Has 2"x 4" capacity. Call 505-620-0355 with any questions, thank you.
|
|
|
XL 4 Head 4" X 6" Moulder molder planer
4 Head. 4" X 6" Push feed XL Moulder. Has 2hp drive, 5hp runs both side spindals, 10hp runs top and bottom spindals. Motors are 3 Phase 220/440 and works fine. A good small shop machine or permanent set up for a larger shop. Air mist injection system keeps the bearings cooler. Sold as is. Comes with 1-6" quicklock aluminum head and planer knives and 1- 6" steel XL head with no knives. Sorry no side heads included. 1 1/4" shafts throughout. Can be site loaded with a forklift. I will consider freight shipment.
|
|
|
Inca Table Saw Moulder Head.
Hard to find Inca table saw moulding head. I got it with a used Inca jointer-planer. Fits 20 mm shaft on Inca saw. Very nice. Clean condition. Comes with a pair of 1/4"radius half-round cutters. The cutters are badly dinged on one side. Would have to be reground for some other profile or used as a template for other cutters. Returns only if item not as described.
|
|
|
9" Moulder Sprial Head 1.5" Bore
Used Titan 9" 230mm) Moulder Head- 125mm Body Dia. 1.5" Bore. With Face Shear- 6 Rows of Knives. Selling because we upgraded our equipment. New ones retail $850.00 at Global Tooling.
|
|
|
Weinig moulder head washer
Weinig moulder head washer PLEASE READ THE FOLLOWING CAREFULLY Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on all items. An additional $25/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within ... more30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. Many of our customers have used the following trucking/freight companies for their truck/freight needs: Small Business Transportation at 888-368-6022 x218(gil) or Freight Quote at 888-595-6298 x1250 Bob. All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to either of these or any other selected trucking/freight companies. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold"AS IS. AS PICTURED” Feel free to Contact Me. You may e-mail me at the above address or call me at(815) 299-7625 Monday through Friday after 3:30pm CST. I will answer your e-mails or calls as soon as possible. On Sep-24-12 at 18:13:27 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction
|
|
|
NICE!! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER - #6NB
aims NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Paulson Enterprises Inc. This is a Four-Head Woodworking Moulder in working condition. Model# 6NB Serial# 928 Specifications: Capacity: 6" x 2" Number of Spindles: 4(2 vertical/ 2 horizontal) Spindle Arbor Diameters: 1-1/4" Table Size: 32" x 8-1/4" Table Height From Floor: 33-1/2" Motors(4) 3 Horsepower. ... more230/460 Volt, 1,755 rpm, 9.4/4.7 Amp, 60 Hz, Three Phase. Electrical: 230/460 Volt. Three Phase. Overall Dimensions: 100" x 38" x 62" tall. Comes as shown in pictures. Does not include cart. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6" FOUR-HEAD WOODWORKING MOULDER- 6NB NICE! PAULSON 6"
|
|
|
GUILLIET KBS 5-head 9inch wide bed Moulder Wood Planer thicknesser like Wadkin
GUILLIET KBS 5-head 9inch wide bed Moulder s/n 21 8661.T.681. 2 x recent cutting heads, Year of Manufacture: 1984. Currently only 4 cutting heads fitted) PLEASE NOTE THIS MACHINE HAS A 3 phase 440 VOLT SUPPLY This has been bought as a job lot I Don't know much about it. It is working and I have seen it working. It is in very good condition. Delivery can be arranged possibly. Final Prices will be Plus VAT@ 20% Please call for any further info. 07813 216057
|
|
|
SCMI 5 Head Moulder, Model: Compact 23
Normal 0 false false false MicrosoftInternetExplorer4 1996 SCMI Compact 23 Five Head Moulder. In good running order with spare heads and tooling. See photos for specs and call or email for more information. Thanks for looking! Edensaw Woods.
|
|
|
Rebate cutter head for spindle moulder with box of scribe cutters
Rebate cutter head for spindle moulder with box of scribe cutters Steel rebate cutter head for a spindle moulder 125mm dia x 50mm depth x 1 1/4" bore comes with a box of new tearout scribes Shipping to any UK destination is £8.75 I will combine shipping where possible Worldwide shipping avaiable please ask for costs Payment is required within 2 days of sale end Payment methods accepted are Paypal Cheque(to clear in advance of shipping) Postal Order Any questions: please use the'ask the seller a question' facility on Ebay and I'll get back to you as quick as possible Best of luck bidding… gsrx_vers_486(GS 6.5.1(486)
|
|
|
2004 Weinig Unimat 1000 - 5 Head Moulder -
Weinig Unimat 1000- 5 head moulder Contact Justin 1-800-519-7147 ext. 101 f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f16735492-0x108-
|
|
|
Old style Whitehill soindle moulder cutter head
Old style Whitehill soindle moulder cutter head A vintage Whitehill spindle moulder cutter head 5" diameter x 1" depth in good condition although not up to current health and safety standards so use is entirely at buyers risk Shipping to any UK mainland destination is £6.00 Payment is required within 2 days of sale end Payment methods accepted are Paypal Cheque(to clear in advance of shipping) Postal Order Any questions: please use the'ask the seller a question' facility on Ebay and I'll get back to you as quick as possible Best of luck bidding… gsrx_vers_486(GS 6.5.1(486)
|
|
|
Dual Hook Moulder Head - 12 & 20 degree - 40mm bore - Cutter Head
Dual Hook Moulder Head- 12& 20 degree- 40mm bore- Cutter Head Corrugations for the knife stock do not fit our knife stock. This cutter head was made for a Chinese knife stock. It can be machined to fit Weinig corrugations.
|
|
|
2000 SCMi Compact 23 ks 5-Head Moulder (Woodworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES ALL CRATING& FREIGHT CHARGES ARE BILLED SEPARATELY FROM THE PURCHASE PRICE OF THE ITEM SCMi COMPACT 23 ks 5-Head Moulder Features: The SCMi Compact 23 ks 5-Head Molder has a capacity of 9-1/16" X 4-15/16" capacity. It features 40mm(1.57" Spindles running at 6.000RPM. Variable feed speeds from 13 to 72 FPM. Equipped with(5) serrated& 3) rubber Feed Rollers along with a powered roller on the outfeed table. Simultaneous adjustments of the feeding system& top horizontal spindle as well as pneumatic hold-downs on feed groups. Features Forward/Reverse jog button and a numerical readout on all critical spindle adjustments. Patented"Set-Up" system is able to make change-overs faster& simpler! Technical Specifications: 230V. ... more3Ph, 60Hz Feed Speed: 13- 72 FPM Spindle Diameter: 40mm@ 6.000 RPM HEAD SEQUENCE: Bottom: 9HP Right/Left Share: 12HP Bottom: 9HP*Specifications listed are to the best of our knowledge* Verification available upon request* Apx. Replacement Cost: $49.950 Condition: 3) Used/ Excellent Condition Our ratings are as follows: 1) New Surplus: Equipment or parts are new. 2)Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. PLEASE VISIT OUR EBAY STORE FOR MORE GREAT PRODUCTS! Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Ple
|
|
|
TFM56B DIEHL 5-HEAD THROUGH FEED MOULDER - #22285
Quote#22285#TFM56B DIEHL 5-HEAD THROUGH FEED MOULDER New 1984. Serial No 584M4695410, Model TFM-56-B EQUIPPED WITH: Belted Spindles All Heads Grooved Bed 10 HP Both Bottom Heads 10 HP Left& Right Side Heads 15 HP O.D.P. Top Head CATALOGUE SOECIFICATIONS: Size Of Finished Work. Maximum. 4" x 6" Top Head. Vertical Adjustment. 5" Bottom Head. Vertical Adjustment. 2" Side Head. Vertical Adjustment. 1.25" Top Head. Horizontal Adjustment. 1.5" Bottom Head. Horizontal Adjustment. 1.5" Cutting Circle All Heads. Minimum. 5.75" Cutting Circle Top Head. Maximum. 8" Side Heads Swing. Maximum. 8.5" Top Head Swing. Maximum. 9" Cuttter Head Speed. 6000 RPM Variable Speed Drive Feeds. Range. 20 to 120 FPM Electrical System. 460/3/60 Overall Dimensions. L x W. 12'3" x 5'3" Overall ... moreHeight. 6'2" NOTE: Replacement Price Is Approximately. $66.000.00 PRICE: F.O.B. OUR WAREHOUSE. $4.950.00 All machines/equipment subject to prior sale
|
|
|
Moulder Cutter Head ( Whisper Head )
Here is a Moulder Head for large moulders It is 6 1/2" in diameter and 4" high The bore size is 2 1/8" can use a sleeve to run on 1 13/16" bore) The cutter is carbide and has a 10% hook great for maple. Thanks for looking God Bless
|
|
|
SK USA MOULDER PLANER HEAD SET UP STAND FIXTURE SKG5015
In good shape. Shipping weight around 92lbs Payments need to be made within 7 days of the end of auction. All items are sold as is with no warranties unless noted otherwise in the item description. If you have a problem let me know and i will do what is right. Thanks for looking at my item.Texas residents pay 6.25% sales tax Powered by Posted with
|
|
|
100MM 4" 4 KNIFE MOULDER HEAD - DML 726910 - 1-13/16" bore - Weinig Wadkin
DML 4 knife 22 degree moulder head. 1-13/16" bore. Good used condition. UPS ground shipping only please.
|
|
|
BYRD SHAPER MOULDER CARBIDE INSERT T & G CUTTER HEAD MOLDER DELTA SCMI MARTIN
One Tongue and Groove Moulder/ Shaper cutter head. The head uses replacable carbide inserts. I believe the cutter head is made by Byrd. I am currently researching this. O.D. is 6" I.D. Bore is 2-1/8" height of the cutter head is 2" and the height of the carbide insert is slightly more than 1-9/16" closer to 1-19/32" Please contact before buying if more info is needed. The cutter can also be run on a shaper using an insert to reduce down the shaft diameter. The cutter head is used but in good condition, it has a few minor scratches that can be seen in the photos. Returns accepted if returned in the same condition sent and returned within seven days of recieving.
|
|
|
SCMI Moulder/ 5 Head; Model #: Superset 23; *COMPLETELY RECONDITIONED*
SCMI Moulder/ 5 Head Model# Superset 23 Completely Reconditioned by SCM Technician All new spindles. Bearings, belts FOR ADDITIONAL PHOTOS OR OTHER USED MACHINES GO TO: HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fc88e9e8c-0x102-
|
|
|
SCMI Compact 22S-4 4-Head Moulder, New Spindle Bearings Recently, 480V, 3PH!
Brand: SCMI Model: 22S-4 Condition: As Taken From Service Stock Number: G-2-157. Specifications- 3 Phase. 480V, Serial Number: 71947 Feed Wheels have been upgraded to a variable speed drive. All spindles have had the bearings replaced in the last 6 months 4 Head(B-R-L-T) working capacity 8-5/8” x 4-11/16” Head Sequence Bottom 9 HP motor. Right/left 12HP motor and Top 12 HP motor Sound insulation hood and dust hoods. Back panel is not shown in the pictures but it is included Manuals are included Framing or crating will incur additional charges. If needed. Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if ... moreitem is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee, if required. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Please s
|
|
|
Rebate moulder head (Boy Tooling)
Boy tooling Rebate head 150mm x 60mm with 40mm bore Scri bing blade model R.p.m. 7000max Outside Irl/UK please contact for postage Thankyou for looking
|
|
|
Harbs 11-Head Moulder - As Is, One Spindle Missing
As Is Condition- One spindle missing. 11 head Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. ... moreNO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
iida 5 head feed through moulder 9 inch jointed wood molder precision Japanese
see more machinery here: http:www.pleasantstmachinery.com/ Description: iida 5 head 9 inch moulder. Jointed on 5th head and 3rd head, 7.5kw feed(10hp) with power up/down and pneumatic hold-downs, jointed, digital depth readouts on 3rd and 4th head.1st bottom=5.5kw, 2nd left=5.5kw, 3rd right =5.5kw, 4th top=11kw, 5th bottom=7.5k.taken from service at low volume millwork shop near kankakee, very clean, low use moulder, its the last of the heavier japan built IIDA models that hold their tolerance under high fpm applications, more woodworking inventory pictures at this link http:www.pleasantstmachinery.com/index.php?mact=Gallery.M6e73e,default,1&m6e73edir=Moulders%2Fiida-5-head-9-inch-moulder&m6e73ereturnid=19&page=19 220/440 volt/3 phase/60 hz. SHIPPPED F.O.B. from 60115. No loading fee on a flatbed, $200 to palletize for a van or ... morebox truck, approx weight 5800 lbs, size is 4x8 foot we enjoy visitors by appointment in our woodwork workshop shop 60115. Please phone first(815)758- 6534 see more pictures here(or call for a video) You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as machinery rebuilders and dealers. To help you choose the right woodworking equipment for your shop. Pleasant St Woodworking Machinery has been serving skilled craftsmen. World-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt woodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized in rebuilding American machines that are ready to work and do what you want them to do. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You! Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the se
|
|
|
Lobo SM-523E 5-Head Moulder Used Woodworking Machinery
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! FOR ALL QUESTIONS PLEASE CONTACT US WITH ANY QUESTIONS 925-872-0929 OFFICE CSWAFFORD925@GMAIL.COM THIS MACHINE HAS PASSED AN ALL POINTS INSPECTION AND READY TO SHIP! Used Lobo Model#SM-523E Automatic 5-Head Moulder machine. 9" Capable machine, 230 volt, 3-phase machine, Very Good Operational Condtion includes several cutterheads. Call or email for more information. Rating: Good Contact Information: 925-872-0929 Cswafford925@gmail.com Financing Available Payment Methods: Visa. Mastercard, Amex, Check, Cash Location: California Please contact for Terms and Condition We offer no warranties on the sale of used equipment. However. We do guarantee that the machine will be in good working condition upon delivery to your facility. We will ship Via Air Ride Flat Bed. Across the entire ... moreUnited States, and Canada. International Shipping as well. Please contact us for a freight rate. Auction Bid does not include Shipping Price, or Sales Tax if Applicable. On Nov-15-09 at 10:04:49 PST. Seller added the following information: On Aug-03-10 at 12:47:12 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio!
|
|
|
WEINIG 5 HEAD MOULDER, 1988
Weinig Profimat 22N. Five Head Feed Through Moulder(Lot 1041) YEAR; 1988 MODEL; P22N TABLE; 9.25” X 77” 5 HEADS 220V. 3 phase, 60Hz, 7.5kw 8-5/8" wide x 4-3/4" high max. working capacity 6000 RPM spindle speed 1-1/2" diameter spindles ADJUSTABLE TABLE Cardan feedworks system 20-72 ft/min. feed speeds Powered raise/lower of feed beam Push button motor controls Includes misc. parts with machine PLEASE CONTACT US ABOUT RIGGING SERVICES BEFORE BIDDING Terms and Conditions: All bidders are responsible to determine the age. Description, condition, and authenticity of all Purchased items. This machine has not been tested under power by any of our employees or our company affiliates. Each item is auctioned“AS IS, WHERE IS, with all faults” in its condition at the time of sale, without any warranties or guarantees, either expressed ... moreor implied, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, POSSESSION, QUIET ENJOYMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, and without recourse by way of refund, reduction of the Purchase Price, or otherwise. Taxes are applicable to all purchases unless an exempt form or re-sale certificate is emailed/faxed to us. Shipping and Handling: Bidders are responsible for all Shipping and Handling charges. Delicate and expensive equipment requires special handling to ensure its safe delivery. Seller and Buyer have the option to allow the Buyer to choose it's own rigging company for item removal. But Seller has final say to selecting rigging personnel for the item removal. Please send us a message with your zip code to get an estimate quote for transport! If you have your own method of transport. Let us know before payment! We Ship Worldwide!
|
|
|
Weinig Unimat 23E 6-Head Moulder-Woodworking
CMS 4714 Woodworking Manufacturer: Weinig Model: Unimat 23E 6 Head YMFG: 2001 Voltage: 460V. 60Hz, 3Ph Condition: As Is. Where Is" Location: Mid-Atlantic Price: $32.500 6-Heads w/ATS, 1st Station: Bottom Spindle 10 hp, 2nd Station: Right Side Spindle 20 hp, 3rd Station: Left Side Spindle 20 hp, 4th Station: Top Spindle 20 hp, 5th Station: Top Spindle 15 hp, 6th Station: Bottom Spindle 15 hp, 5.5 hp variable speed feed motor 17-78ft per min, Cardin drive feed works Pneumatic pressures on feed rollers, All spindle dia are 1 13/16” All motors are 230/460V, 2) power rollers in table Manual waxilite pump system, Complete electrical control cabinet, Equipped w. ATS System, Complete sound enclosure, Siemens control board touch screen, Contact: Chris Deal 704-288-1904 x 108 link to machine:
|
|
|
WATKINS MOLDER MOULDER CUTTER HEAD GRINDER
FOR SALES WATKINS MODEL NH 512 MOLDER MOULDER CUTTER HEAD KNIFE GRINDER. DUAL HEAD, ROLLER TABLE, INDEXER, TAIL STOCK. NICE CONDITION BOUGHT AT AUCTION PLANT CLOSED. AS ALWAYS RETURNS WELCOME FREIGHT YOUR COST PICKUP FINE CAN LOAD YOUR TRUCK QUESTIONS WELCOMR SOLD AS IS 10 DAY WARRANTED
|
|
|
Forest City Tool 5-770-4 82-195 Four Pocket 15° Hydraulic Moulder Head
Forest City Tool 5-770-4 82-195 Four Pocket Hydraulic Moulder Head 1-13/16 Bore 15° 1- 13/16" x 6" dia x 4"High(4 3/4" overall height)
|
|
|
Weinig Powerlock HSK Moulder Head. CNC
A little surface rust but otherwise looks good. Bought out of closed shop so I don't know much about it. Needs gibs. Posted with
|
|
|
Moulder Head. 1.25 spindle.
Moulder head. Fits on 1.25 spindle. 4"x 1.85. Has four corrugated slots for knives. Comes with two gibs to hold the knives. Posted with
|
|
|
Cutter Head Shaper Head C2 1 1/4' Spindle Tooling shapers moulder RYE 9000RPM
Welcome to our auction. For over 45 years Pruitt Machinery has proudly been an accomplished supplier of New and Used machinery and parts to the woodworking industry. UP FOR AUCTION One Rye Shaper Head. This is a C2 Shaper head with a 4" cutting diameter and a 2 1/4" cutting face. It will fit a 1 1/4" inch shaft. 9000RPM Max As Is SHIPPING AND TERMS We normally ship UPS. You may pick your item up at any time after payment at our place of business. Please let us know in the initial contact if you desire to pick your item up and save on the shipping. We are open 8:30am to 5 PM weekdays. Pruitt Machinery 25 23rd St NW Hickory NC 28601(828) 328-2641 RETURNS All returns accepted! The buyer should contact us within 14 Days after receiving the item if you wish to return the item. We will provide you with a RA number to include in the ... morepackaging. The item must be returned in the same condition as it was shipped otherwise there may be charges. Your refund will be given as Money Back. The return shipping shall be paid by the buyer. The buyer has 14 days to return the item once given the RA number. After the item is received and inspected the refund will be released back to the buyer. PAYMENT We accept a wide variety of payments. The fastest ways of payment are. PayPal Credit Cards through PayPal Credit Cards through Pruitt Machinery(828) 328-2641 Slower methods of payment Postal money orders Cashiers Check Personal Check All postal money orders or checks will be checked for fraud and must clear before we will ship your item so please allow up to 2 weeks after we receive your payment for the item to ship. FEEDBACK We will provide feedback after the transaction and hope you will do the same. We strive for happy customers so please contact us if you have any problems before leaving negative feedback. We will provide you with a positive solution to your problem. Pruitt Machinery 25 23rd St NW Hickory NC 28601(828) 328-2641
|
|
|
DIEHL Accumould DL205 5-Head Moulder (Woodworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE FOR ACCURATE FREIGHT& CRATE CHARGES Diehl Accumold 5-Head Moulder Model: DL 205 Year: Not Available Condition: Good Rating: 3) Used/Tested Replacement Cost: $ 65.000.00 Technical Specifications: 160V. 60CY, 3PH, 70AMPS Working Capacity: 8" x 4-3/4" Head Sequence: 7.5HP. Right/ELft 15HP, Top 10 and Botoom 10HP Motor. Spindle Diameter 1-13/16" with cutterhead speed of 6000RPM. Spindles with Mechanical Readouts. Feed Motor: 3HP. Variable speed 20-70FPM. Cardan drive gear boxes. Infeed Table: 6'6" with rollers in the infeed fence to reduce friction in feeding. All specifications are listed to the best of our knowledge. Please email with any questions prior to purchase. Machine Ratings: 1) New Surplus: Equipment or parts are new. 2) Demo/Floor Model: Demonstration use only. Like new. ... more3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was rece7ived by us as an individual part or integrated equipment that could not or was not tested. Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. S
|
|
|
Dominoin Midas FP push feed moulder, 4 head
Dominoin Midas FP push feed moulder. 4 head. This is a nice push feed 4-head molder. The machine is ready to plug in and use. The top spindle has been replaced and the rest are in good condition. It is Top. Side, Side, Bottom configured. It is considered a 2"x6" machine. I've used it to run wood flooring as well as moldings for use in my cabinet shop. I no longer have use for it and it's sat over a year without being used. The electicals are 3ph. Top/Bottom motor is 10HP. Left and Right motor is 7.5HP. Feed motor is 3HP. The spindles are 1 1/4" Feel free to ask any questions. This unit is large and heavy. It will ship common carrier or I will load it for local pickup. 3000LBS. 3' x 7' x 5' Unit will be bolted to skids to ship. Full crating will be an extra charge. Thanks for looking and please check out ... moremy!
|
|
|
Mattison 276 4 head moulder
Used Mattison Machine 276 4 head Moulder in good working condition. Came out of a working re-milling factory that specialized in Sitka Spruce products and was in full operation until plant resently ceased operation. Please call 253 862 9310 for more info. Ask for Richard.
|
|
|
Weinig Unimat 668 Gold Moulder - 6 Head 4.75' x 9.0625' Feed Through
Weinig Unimat 668 Gold Moulder General Info: Stock# BBC-913-608 Condition: Used Tested: Yes Brand: Weinig Model: Unimat 668 Gold Serial: 99970 Year: 2003 Weight: N/A Shipping Dimensions: N/A Location: Brunswick. GA Specifications Weinig Unimat Gold-668 Moulder 4 3/4' X 9-1/16" feed thru. GOOD condition. 5" x 9" cap. Six(6) head, with good HP and 2 sets of heads. 1-1/2" dia. spindles, It has a 5HP vari-speed drive of 15 to 82FPM, 10HP 1st bottom head, 10HP right side head, 10HP left side head, 15HP 1st top head, 10HP 2nd top head, 20HP last bottom head, feed drive 5HP and 1HP motorized thickness adjustment. It is wired for 460/60/3. It pulls a total of 111 amps, so you need a 125 amp breaker. Equiped with 1- 1/2" dia. spindles, 6'6" infeeed table, dust heads, 6,000 RPM spindles with spindle lock, sound ... moreenclousure, mfg's 2003, 8-9" long cutterheads and ten additional heads. It also has a nice metal dust tree SN: 99970Weinig Unimat Gold-668 Moulder 4 3/4' X 9-1/16" feed thru. GOOD condition. 5" x 9" cap. six(6) head, with good HP and 2 sets of heads. 1-1/2" dia. spindles, It has a 5HP vari-speed drive of 15 to 82FPM, 10HP 1st bottom head, 10HP right side head, 10HP left side head, 15HP 1st top head, 10HP 2nd top head, 20HP last bottom head, feed drive 5HP and 1HP motorized thickness adjustment. It is wired for 460/60/3. It pulls a total of 111 amps, so you need a 125 amp breaker. Equiped with 1- 1/2" dia. spindles, 6'6" infeeed table, dust heads, 6,000 RPM spindles with spindle lock, sound enclousure, mfg's 2003, 8-9" long cutterheads and ten additional heads. It also has a nice metal dust tree. Seller Contact Information: Carl Davis 404-933-3804 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contac
|
|
|
Stetson Ross Smithway XL Moldmatcher Feed Through Moulder 4 Head, 2" x 6"
Smithway XL Moldmatcher Feed Through Moulder 4 Head General Info: Stock# CB-131033 Condition: Used Tested: Yes. Good Working Condition Brand: Smithway Model: XL 4 Head Serial: 80-60-130 Year: N/A Unit Weight: 1300 lbs. Unit Dimensions: 62" L x 26" D x 55" H Location: Stone Mountain. GA Specifications: 2" x 6" Width/ Thickness Capacity. 10HP/ 230V/ 3Ph Motor for top and bottom heads, 5HP/ 230V/ 3Ph Motor for both side heads, 2HP/ 230V/ 3Ph Motor for Feed Drive. 1-1/4" Spindles, On/ Off switches for Motors, Forward/ Reverse Switch for Feed Drive. Additional Info: Unit has been tested and is in good working condition. Machine does not have the back cover for the belts. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always recommend ... moreto come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
moulder terminus head 9" high speed steel knives 230mm 10 sets of 4
10 sets of 4 for 9" moulder heads. One set carbide, some are near new some ground down but all useable, the carbide set is almost new, these were used on a bottom front head on a scmi 5 head moulder, also have a device to sharpen the leading edges for extra just ask, the device mounts in a 9" head that accepts corrugated knives, the device I made sharpens the actual cutting edge instead of sending in to flat grind, sold as is no returns thanks for looking
|
|
|
Weinig Unimat 500/017, 5 Head Moulder - #945080
Please Refer To Machine# 945080 Weinig Unimat W8304 Woodworking Machinery- Manufacturer Weinig. Model# Unimat 500/017. Serial# E106.58. Heads 5-Head(B-R-L-T-B) working Capacity 9-1/16" X 4-3/4" Spindle Diameter 1 1/2" with with cutterhead speed at 6.000 RPM, Electronic DRO on all spindles. Spindle Sequence Bottom 10 HP. Right/left 10HP, Top 15 HP, and bottom 10 HP, with mech brakes. Memory Redial Yes. For quick setup and profile storage, Electronic readouts for chipbreaker. Feed System Inverter Controlled. Variable from 18-100 FPM with 4 HP motor. Chipbreaker& Pressure Element at top spindle: side pressure opposite right spindle with 2 rollers. Infeed Straightening table 2 M(6-1/2" central lub. lateral pressure roller at infeed table. Enclosure Full sound& safety with electromechanical interlock and Waxilit pump. ... moreFOB Elk River. MN. Price $29.500.
|
|
|
MOLDER MOULDER PLANER CUTTER HEAD
HAVE A 6 KNIFE CARBIDE CUTTER HEAD FOR A MOLDER TO MAKE ASSORTED TRIM 4 3/4" ACROSS KNIVES 2 1/4 WIDE HEAD 1 13/16 SHAFT MFG UNKNOWN WILL HAVE MORE KEEP LOOKING PATTERN AS PER PICTURE LOOKS LIKE MAYBE GARAGE DOOR EDGE? SEALED IN PROTECTIVE COATING 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14387ceaf23-0xe3-
|
|
|
Saber Moulder Head #1 molder shaper head for wood shaper 2 1/8" bore
Item was pulled out from liquidated woodworking business. These are very heavy pieces for production of drawers and doors- check profile on the pics. We also have other blades and dado blades. You can also come and check what I have at my shop in Santa Anna. CA. 626*329*3980 Will ship by First Class Mail within U.S. Local pick-up is also available. Flat shipping fee( Priority mail) $69.00 U.S. Only NO international shipping!
|
|
|
Moulder Cutter Head with 2 Millwork Knives
Moulder Cutter Head with 2 Millwork Knives About 1-1/8" ID bushing. 1-1/4" bore 4" tall. 4" diameter Used/Surplus. Good condition, not in original packaging. Super fast shipping check my feedback and see for your self. Please do not bid if you do not intend to buy. Items that are paid for after 2 pm central will go out the following day. If there are any unforeseen problems with getting your item out. I will email you as soon as possible. Buyer must email me or make payment in 7 days after auction ends. Happy bidding and thanks for L00KING. Please email me if you have any questions. It is the sole responsibility of the bidder to verify if the item is compatible with their system. E1
|
|
|
Weinig Profimat Moulder P22N 5 Head machine
WEINIG Profimat Moulder- good working moulder- we no longer need it Model: P22N S/N: 226-6806 Purchased new in 1991 Machine has all new spindle and motor bearings 5 Head Machine Feed Through Type Model P22N Year of manufacture 1991 Head configuration b.R,l,t,b Shafts 38mm(1.5" dia Motor HP 7.5.15,10,10hp Feed motor power 3hp Rise and fall motor 1hp Max finished stock 200 wide x120mm thick Spindle speed 6000rpm Infeed table 2000mm Variable Feed Type of drive cardan shaft Overall dimensions 60" wide x 65" high x 144" long. Weight is 8000 pounds. EM-10 Hopper Feeder included Heads included- 4" helical insert style(4) 2.625" helical insert style(2) 6" straight knifes(3) 4" straight& profile(4) 2.625" staight& profile(4) Carbide profile(2) Can load any truck.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1445d2e5872-0x10e-
|
|
|
MOULDER HEAD, ALUMINUM SPIRODEX, 9-1/2" X 5-3/8", 1-13/16" BORE, EXCELLENT COND!
MOULDER HEAD ALUMINUM SPIRODEX 9-1/2" LONG 5-3/8" DIAMETER 1-13/16" BORE NICE USED HEAD WITH LOTS OF HOURS LEFT ON IT SHIP TO CONTINENTAL US ONLY CAN COMBINE SHIPPING WITH OTHER HEADS IF PURCHASED TOGETHER
|
|
|
Weinig H23 7-Head Moulder-Woodworking-PRICE REDUCED!
CMS 4862 Woodworking-Moulders Manufacturer: Weinig Model; H23 7-head YMFG: 1998 Condition: As Taken From Service Location: Southwest USA Price: $40.000 Hydromat 23, 7- Head machine: Bottom. Right, Left, Right, Top, Top, Bottom, Variable feed speed: 20-120 Feet/minute, This machine is available immediately. Price will include loading onto buyer's truck. link to machine: Contact: Ralph Viegelmann 704-288-1904 x 101
|
|
|
MOULDER HEAD, WEINIG, STEEL, 5-7/8" X 5-1/2", 1-13/16" BORE, EXCELLENT COND!
MOULDER HEAD WEINIG. STEEL 5-7/8" LONG 5-1/2" DIAMETER 1-13/16" BORE NICE USED HEAD WITH LOTS OF HOURS LEFT ON IT INCLUDES CARBIDE FLOORING RELIEF KNIVES SHOWN SHIP TO CONTINENTAL US ONLY CAN COMBINE SHIPPING WITH OTHER HEADS IF PURCHASED TOGETHER
|
|
|
MOULDER HEAD, WEINIG, STEEL, 9-1/16" X 5-3/8", 1-13/16" BORE, EXCELLENT COND!
MOULDER HEAD WEINIG. STEEL 9-1/16" LONG 5-3/8" DIAMETER 1-13/16" BORE NICE USED HEAD WITH LOTS OF HOURS LEFT ON IT INCLUDES CARBIDE FLOORING RELIEF KNIVES SHOWN SHIP TO CONTINENTAL US ONLY CAN COMBINE SHIPPING WITH OTHER HEADS IF PURCHASED TOGETHER
|
|
|
LEITZ spindle moulder shaper molder cutter head
LEITZ 165139198 WE 500-1-50
|
|
|
LEUCO spindle moulder shaper molder cutter head
LEUCO 021-S19 167 967
|
|
|
XL 4" four head moulder belt driven
XL 4" four head moulder belt driven. Used to make Base& Casing; can mould any pattern. Please feel free to email with any questions.
|
|
|
Vonnegut 8" 6 head moulder
This moulder is complete and and has been in storage so the paint is a little more faded than it appears in the photos. This machine can make mouldings from rough lumber. Please feel free to email with any questions. I can work with your shipping provider.
|
|
|
Wood Moulder Cutter Head / Molder Head
A Wood Moulder Cutter Head. This side head was used. Years ago, on a Mattison 276- 4 head- wood molder for high speed production cut molding. 6 knife head for a smooth cut. 6" wide, 2 1/4" thick, and 1 13/16" arbor. Complete and ready to go.Also work on a Wenig, Diehi, Leader Mac, and others with same arbor size. Made by Wisconsin Knife Works in good condition, with knives. FREE SHIPPING.Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144aa8b8006-0xff-
|
|
|
Ø6-1/4", 6" Long DML Lineberry 22576 Brazed Carbide Moulder Head With Collet
6-1/4" Diameter 6" Long 7-1/4" Long Total including Collet 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5-7/8", 6-5/8" Long DML 736576 Four Pocket Moulder Head
5-7/8" Diameter 7-1/4" Diameter with cutters 6" Long- Moulder Length 6-5/8" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø6", 4-1/2 Long DML 729702 Four Pocket Moulder Head with Collet
6" Diameter 7-1/2" Diameter with cutters 3-1/2" Moulder Length 4-1/2" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø6" Original Weineg 504 02 490A Mech. Vors. max 800 Four Pocket Moulder Head
6" Diameter 7" Diameter with cutters 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5-7/8", 4" Long DML 730524 Four Pocket Moulder Head
5-7/8" Diameter 7" Diameter with cutters 4" Long- Moulder Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5", Ø71/2 with Blades, 5" Long DML 736418 Moulder Head
5" Diameter 7-1/2" Diameter with cutters 5" Long- Moulder Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5-7/8", 2-3/8" Long DML 733634 Four Pocket Moulder Head
5-7/8" Diameter 6-3/4" Diameter with cutters 2-3/8" Long- Moulder Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø6-1/4", 4" Long DML Lineberry F400 Four Pocket Moulder Head with Collet
6-1/4" Diameter 8" Diameter with cutters 4" Long Moulder Length 5-1/4" Overall Length Includes Collet- I think it is a 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5-3/8", 2-3/8" Long A 722872 DML Four Pocket 15° Moulder Head
Ø5-3/8" 2-3/8" Long A 722872 DML Four Pocket 15° Moulder Head 5-3/8" Diameter 9-1/4" Diameter with cutters 2-3/8" Long 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5-1/2", 4-1/4" Long MH097 Six Pocket Moulder Head With Collet
Ø5-1/2" 4-1/4" Long MH097 Six Pocket Moulder Head With Collet 5-1/2" Diameter 7-1/4" Diameter with cutters 4-1/4" Long 5-3/8" Long Total including Collet I Think it is a 1- 13/16" collet I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-144b524e74f-0xe6-
|
|
|
Ø5-3/4" Brazed Carbide Plant 4 Moulder Head 1-13/16 Bore
5-3/4" Diameter 4" Moulder Length 5-1/2" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144be6132d9-0xfd-
|
|
|
Ø6" Forrest City Tool 5-1090 85-302 Four Pocket 15° Moulder Head 1-13/16 Bore
6" Diameter 4" Moulder Length 4-1/2" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø7" DML Lineberry 97089 5-831-6 Moulder Head 1-13/16 Bore
5" Diameter Base 7" Diameter with Cutters 6" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144be6132d5-0x100-
|
|
|
Ø6"10818 DP5 Six Pocket Moulder Head 1-13/16 Bore
6" Diameter 7-1/4" Diameter with Cutters 6" Moulder Length 6" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5-7/8" DML 719596 Four Pocket 22° Moulder Head 1-13/16 Bore
5-7/8" Diameter 7-3/4" Diameter with Cutters 3" Moulder Length 3-3/4" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø6" Brazed Carbide DML 728309 Moulder Head 1-13/16 Bore
6" Diameter 5" Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø6" Brazed Carbide DML 703135 Moulder Head with Collet
6" Diameter 4" Length Has a few broken or missing carbide pieces 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø5-3/4" DML Lineberry 94500-1 Four Pocket Moulder Head
5-3/4" Diameter 4-1/2" Overall Length 4" Moulder Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
Ø6" Original Weinig Hydro 504 150 02 1/4 A Four Pocket Moulder Head Max 8000
6" Diameter 6-3/4" Diameter with Cutters 4-1/2" Overall Length 3-5/8" Moulder Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
 |