In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
275.00
Buy It Now
$10.34 Shipping
Condition: Used
Location: Catonsville, United States
This is the carriage assembly that holds the roller bearings for the motor and blade. The part is in good condition. Cleaned, primed, and all bare metal ... morehas been oiled. 
$
27.50
Buy It Now
$11.94 Shipping
Condition: Used
Location: Waterford, United States
USED, CRAFTSMAN MITER VISE. NO CRACKS OR REPAIRS. LOOK AT THE PICTURES.
$
20.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It has 44 pages. Sears Craftsman 113.199200 & 113.199250 10" Table Saw. About this manual : This is a high quality reproduction manual which has been ... morescanned with a high resolution scanner. Basic Saw Cuts.
$
409.00
Buy It Now
Condition: For parts or not working
Location: Euclid, United States
Inventory Number: 11230740020. Manufacturer: ROCKWELL. See details below. Larger pallet sizes cost more. Capacity: 16" BLADE. (c) Truckload and Partial ... moreTruckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This manual contains information on setting up and squaring this radial arm saw to the table. We have been providing this service to fellow craftsman ... moreand machinist for over 20 years. We treat everyone as we would like to be treated.
$
5899.99
Buy It Now
Condition: Used
Location: Millersburg, United States
5 hp motor. Can be wired 230 or 460V. Part Number Radial 700/7 FM US. Pallet Racking. Model 700/7 FM. Lift Tables. This saw is wired for 230V. Cast Iron ... morearm.
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
It also contains a complete set of exploded view diagrams of the parts for this saw. I have collected this information for many years and have found the ... moreinformation they contain to be priceless in using and setting up the machines properly.
$
4299.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Model 600 P3S. 5 hp motor. Can be wired 230 or 460V. Pallet Racking. Lift Tables. This saw is wired for 480V. Cast Iron arm. Our mission is to empower ... moreindustries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Dewalt 925 Radial Arm Saw Instructions and Parts Manual. Bevel Clamp Handle.... 6.
$
509.00
Buy It Now
Condition: For parts or not working
Location: Watertown, United States
Inventory Number: 10231250002. Model Number: BVH 56T34068D P. Capacity: 2HP. See details below. Larger pallet sizes cost more. Manufacturer: DELTA. (c) ... moreTruckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Dewalt 7770 10" Radial Arm Saw Instructions& Parts Manual Manual Description: Number ... moreof Pages: 23 This is a reproduction. Not a photocopy, of an original Dewalt/ Black& Decker 7770 10-inch Radial Arm Saws Instructions, Maintenance, and Parts Manual. This manual contains information on maintaining and operating instructions. It also contains instructions on how to properly align the radial arm saw to the table. The manual contains explosive view diagrams of all the parts as well as a wiring diagram. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-1443538dda5-0xf3-
$
17.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It has 36 pages. Basic Saw Operations. About This Manual : This is a high quality reproduction manual which has been scanned with a high resolution scanner. ... moreOpera tor and Parts List Manual. Reprinted from original manual using high quality 24lb.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. There are even ... moreinstructions for aligning your saw with your table and fence.
$
100.00
Buy It Now
Condition: Used
Location: De Pere, United States
This is a huge saw; Made by Dewalt. model GE I don't know much about this machine but I know it came out of a working shop. This is local pick up ... moreonly because of its size.
$
269.95
Buy It Now
Free Shipping
Condition: New – Open box
Location: Garnett, United States
A Triple Chip Grind (TCG) has a trapezoidal tip that cuts a groove with slanting sides. This is followed up by a square top tip that makes the side of ... morethe groove square. The first tooth, or lead tooth, has a double 45 degree angle corner bevel.
$
1499.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Cantilever Racking. Model RN 700. Pallet Racking. Lift Tables. For 5 hp motor. Our mission is to empower industries with the tools and solutions they ... moreneed to thrive in a dynamic and ever-evolving marketplace.
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Powr-Kraft 10" Radial Arm Saw Operator's and Parts Manual for model TPC-2610B. It also contains ... moreinstructions for squaring the table and squaring the saw blade to the fence.
$
20.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It has 44 pages. Sears Craftsman 113.197602 10" Table Saw. About this manual : This is a high quality reproduction manual which has been scanned with ... morea high resolution scanner. Basic Saw Cuts. Operation & Parts Manual.
$
35.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Dewalt 16" and 20" Radial Arm Saws Instructions and Parts Manual that covers the Type 4 Nos. 3551, ... more3556, 3571, 3576 and Type 5 Nos. 3553, 3558.
$
124.95
Buy It Now
$21.00 Shipping
Condition: Used
Location: North Tonawanda, United States
( depends on your device ). (Preferred & cheapest). I did have to cut the cord to get it out but there is plenty left to wire it again. Motor is smooth.
$
30.00
Buy It Now
$2.30 Shipping
Condition: New – Open box
Location: South Lyme, United States
Document Title: Dewalt 16& 18 Inch Type A Radial Arm Saw Manual. Instruction, Maintenance and Parts Number Of Pages: 28 Condition Of Original: Good ... moreScan Type: Color Covers and Augmented Grayscale conversion of Black& White Contents Scan Quality: Very Good Description: DeWalt Black& Decker Bulletin No. 2629. Installation. Operation, Maintenance, Standard adjustments and troubleshooting for the the DeWalt Type A, 16 and 18 Inch Arm Saws. This manual covers 16 Inch Nos. 3551, 3556, 3561, 3566, 3571, and 3576 saws as well as 18 Inch Nos. 3552, 3557, 3562, 3567, 3572, and 3577 saws. It contains a great section on common operations illustrated(as is the rest of the manual) with labled high quality photos for additional clarity. A parts section comprised of exploded views of major sub-assemblies and parts lists, and and a series of wiring diagrams for 3 phase and single phase operation followed by and electrical troubleshooting page. This is a really nicely arranged manual. This is an augmented version of the original manual has been nicely renovated from a good copy. A great value if you have one of these heavy duty industrial saws. Product Media: Your Choice of Hardcopy or PDF on CDROM. Sample Page:
$
8.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. (Preferred & cheapest). There is a couple of options.
$
5999.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Country of Manufacture: United States. Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will need to know the ... morefollowing We choose the carrier. Need it urgently?.
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Delta Getting the Most Out of Your Radial Arm Saw book manual. This book goes into details of ... moresetting up your radial arm saw for different types of cuts.
$
11.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
$
2449.00
Buy It Now
Condition: Used
Location: Pico Rivera, United States
This is a Heavy Duty Radial Arm Saw in working condition. Made in the U.S.A. by Delta Machinery. Out Rip: 28". Saw Head Tilt: 90 degrees L/R. Blade Size: ... more14" maximum. Arm Swivel: 90 degrees L/R. Surface Area: 39" x 40".
$
54.75
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
This Oshlun 10" 60 tooth blade (SBW-100060N) has been designed for cutting all types of hardwood, softwood, and plywood with sliding miter and radial ... morearm saws. Great for crosscutting applications where a smooth cut is needed.
$
39.99
Buy It Now
$15.50 Shipping
Condition: New
Location: West Palm Beach, United States
Tenryu 12" x 80T.
$
3999.99
Buy It Now
Condition: Used
Location: Millersburg, United States
5 hp motor. Can be wired 230 or 460V. Model RN 700. Pallet Racking. Lift Tables. This saw is wired for 480V. Our mission is to empower industries with ... morethe tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
$
127.81
Buy It Now
$118.59 Shipping
Condition: For parts or not working
Location: Middlebury, United States
Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will need to know the following Condition: For Parts or Not ... moreWorking. Need it urgently?. Call us and we will do what we can to get it to you quickly.
$
19.97
Buy It Now
$3.97 Shipping
Condition: Seller refurbished
Location: Addison, United States
Sears Craftsman 10 Accra-Arm Radial Saw. Nothing flashy, just all the information you need to Operator, Maintain & Adjust Your Craftsman. Operator Manual ... more113.29401.
$
4999.99
Buy It Now
Condition: Used
Location: Columbus, United States
Comes with indeed and outfeed conveyors. I only have the outfeed pictured at this time. Good Used Condition. 7.5 hp 3 phase 230/460 Local pick up, Columbus ... moreIN 47201. I can load onto your truck.
$
12.90
Buy It Now
$6.00 Shipping
Condition: New
Location: Stockbridge, United States
$
18.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
$
68.95
Buy It Now
$17.80 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. ( depends on your device ).
$
8.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
$
25.00
Buy It Now
$2.30 Shipping
Condition: New – Open box
Location: South Lyme, United States
Document Title: Dewalt 12 Inch Radial Arm Saw Manual Bulletin 2544-4 Number Of Pages: 20 Condition Of Original: Very Good Scan Type: Augmented Grayscale ... moreconversion of Black& White Contents Scan Quality: Very Good Description: Installation. Operation, Maintenance and Parts Manual for the the DeWalt No.7790/3431- 7791/3432- 3436 Type I No. R-1512 Type A Radial Arm Saw. This manual contains a great deal of set up and maintenance information as well as a section on common operations illustrated(as is the rest of the manual) with high quality photos for additional clarity. Electrical diagrams, and exploded parts drawings for major assemblies with associated parts lists finish out a very worthwhile manual. This is a fully restored and augmented version of the original manual has been nicely renovated from a good copy and is clean clean clean. Better than the original! Product Media: Hardcopy Or PDF on CDROM Sample Page:
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction of an original Dewalt GR Radial Arm Saw Instructions Manual. 'Heeling', to correct in bevel position... 5. Rip scale, to adjust ... morefor in-ripping..
$
418.78
Buy It Now
Condition: Used
Location: Middlebury, United States
Prefer to pick it up yourself?. BULLSEYE INDUSTRIAL SALES, LLC. Will there be a dock or forklift. Unless otherwise specifically agreed to in writing by. ... moreSold for parts or repair. To get a freight quote we will need to know the following.
$
1299.64
Buy It Now
Condition: Used
Location: Middlebury, United States
Model: Hydracut. Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will need to know the following Size: Length: ... more84 in. Width: 20 in. Height: 55 in. Need it urgently?.
$
17.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It has 30 pages. Basic Saw Operations. About This Manual : This is a high quality reproduction manual which has been scanned with a high resolution scanner. ... moreOpera tor and Parts List Manual. Reprinted from original manual using high quality 24lb.
$
22.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Delta Multiplex 30-A Radial Arm Saw Instruction and Parts List Manual For models: Delta 30-A Multiplex Description: This is an Instruction and Parts List ... moremanual for the Delta 30-A Multiplex Radial Arm Saw. It has sections on: Operation. Maintenance, Assembly, Adjustments, Expanded Parts Diagrams, Parts List. It has instructions on how to set up for multiple woodworking operations including Compound Mitering, Dadoing, Ploughing, Tenoning, Rabbeting, Grooving, Moulding, Routing, Shaping, Planing, Sanding, and others. It has 28 pages. and was printed in 1950. To inspect the quality of the manual, and to view select pages, please click on the gallery images above to enlarge. Includes sections on: Operation Maintenance Assembly Adjustments Setup Instructions for numerous operations Parts List Expanded Parts Diagrams Rabbeting Moulding Routing Shaping Planing Compound Mitering Number of pages: Approx 28 Condition of original: Very Good Publication date: 1950 Publication No. PM-1732 Added Notes: Due to others making copies of these manuals for resale. I have lightly watermarked select pages to discourage this practice. About This Manual: This is a high quality reproduction manual which has been scanned with a high resolution scanner. Each page is then digitally edited in Photoshop to remove grease marks. Fingerprints, writing, and other imperfections that the original manual may have had. It is then printed on 24 lb heavy paper and 65 lb cardstock for the covers with a 600 DPI LaserJet printer. The result is a clean and durable manual which many times is better than the original and should last many years in your shop. Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. Sales tax charged for Kansas sales. See my for more manuals. Be sure to add me to your
$
25.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of a Rockwell 14" & 16" Radial Arm Saws Instructions and Parts Manual. This manual covers the following known ... moremodel numbers 33-770, 33-771, 33-772, 33-780, 33-781, 33-782, 33-783, 33-784, and more.
$
15.00
Buy It Now
$5.95 Shipping
Condition: Used
Location: La Grange Park, United States
knob and rod off 33-890 radial arm saw
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Delta-Rockwell 12" and 14" Radial Saws Instruction and Parts Manual. I have collected this information ... morefor many years and have found the information they contain to be priceless in using and setting up the machines properly.
$
11.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest).
$
20.00
Buy It Now
$2.20 Shipping
Condition: New – Open box
Location: South Lyme, United States
Document Title: DeWalt Model GE Manual Radial Arm Saw Instructions Number Of Pages: 12 Condition Of Original: Very Good Scan Type: Augmented Grayscale ... moreconversion of Black& White Contents Scan Quality: Very Good Description: Installation. Operation, Maintenance and standard adjustment for the the DeWalt Model GE Radial Arm Saw. This manual contains a great section on common operations illustrated(as is the rest of the manual) with labled high quality photos for additional clarity. This is a really nicely arranged manual. This is an augmented version of the original manual has been nicely renovated from a good copy and is clean clean clean. Better than the original! We also have the Parts Manual for this machine as well. Check out our store or contact us directly if you don't see it. Product Media: Your Choice of Hardcopy Or PDF on CDROM. Sample Page:
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Rockwell/Delta 12" Radial Saw "Plus 10" Instruction and Parts Manual. This radial arm saw manual ... morecovers how to install and set up this machine for use.
$
1150.00
Buy It Now
Condition: Used
Location: Guilford, United States
Hz: 60 RPM: 3425. model: DEWALT T1831. Radial Arm Saw. Global Machine Brokers, LLC.
$
16.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
There is a couple of options. I believe the below link is the manual for this machine. (Preferred & cheapest).
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of an original Rockwell-Delta 10" Deluxe Radial Arm Saw Operator's and Parts Manual. It also contains instructions ... morefor squaring the table and squaring the saw blade to the fence.
$
16.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Dewalt 1500 Radial Arm Saw. The manual has about16 pages. About this manual : This is a high quality reproduction manual which has been scanned with a ... morehigh resolution scanner. Type of Manual : Instruction, Maintenance, & Parts.
$
19.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
(Preferred & cheapest). ( depends on your device ). I believe the below link is the manual for this machine.
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction of an original Dewalt MB & GW Radial Arm Saw Instructions and Parts Manual. This manual contains information on operations of this ... moremachine, and parts diagrams with parts numbers.
$
6.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. (Preferred & cheapest). There is a couple of options.
$
32.95
Buy It Now
$21.80 Shipping
Condition: Used
Location: North Tonawanda, United States
I believe the below link is the manual for this machine. ( depends on your device ). (Preferred & cheapest). There is a couple of options.
$
16.95
Buy It Now
$10.95 Shipping
Condition: Used
Location: Kimberly, United States
$
10750.00
Buy It Now
Condition: Used
Location: Wichita, United States
The Original Saw Co 20" Model 3553 Type 8 Radial Arm Saw LIKE NEW CONDITION.
$
1299.64
Buy It Now
Condition: Used
Location: Middlebury, United States
Take up to an 18" Blade. Country of Manufacture: United States. Prefer to pick it up yourself?. Will there be a dock or forklift. 7.5Hp Direct drive 3500RPM. ... moreSize: Length: 25 in. Width: 50 in. Height: 57 in.
$
4299.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Part Number Radial 600 P3S FM US. Model 600 P3S. 5 hp motor. Can be wired 230 or 460V. Pallet Racking. Lift Tables. This saw is wired for 480V. Cast Iron ... morearm.
1 2 3 4 5 6 7
 In 

Former Listings  
 
Delta 16" Single Phase 3 HP Radial Arm Saw Model 33-410 w/ Accessories
Radial Arm Saw You are bidding on one one Delta 16" Radial Arm Saw. Model 33-410. Item is used, but in great condition. There are some cosmetic scratches and scrapes to the unit, but these will not affect the unit's function. This unit is from a labratory environment and saw limited use. Comes with everything pictured. For more pictures of the accessories see: Motor Specifications: Delta No. 438-02-314-2032 8H1498FL5501AAP HP: 3 RPM: 3450 Volts: 230 Amps: 13.0 Hz: 60 Ph: 1 Encl. TEFC Service Factor: 1.0 Frame: 149Z-87 Insul Class: B3 Max Ambient: 40 Deg C Type: BFL Design Rating: L KVA Code Letter: H Cont. Saw Duty Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. When requesting a shipping quote. Please include your zipcode and whether the unit will be delivered to a residence ... moreor a business with a truck high dock or forklift. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves($75 packaging fee added to total) or we can provide a competitive quote to the buyer. Shipping weight 680 lbs. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details, but please be advised that we will not sign a freightquote.com BOL. We apologize for any inconvenience and we will do everything we can to assist in finding the best freight price we can. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and business's. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
INDUSTRIAL DEWALT RADIAL ARM SAW
This is a huge saw; Made by Dewalt. model GE I don't know much about this machine but I know it came out of a working shop. This is local pick up only because of its size.
AMERICAN SAW 16" RADIAL ARM SAW
THE CASTING ON THE SAW SAYS"AMERICAN SAW MILL MACHINE CO. THATS ABOUT ALL I KNOW ABOUT THE SAW. IT HAS A 16" BLADE ON IT AND IT LOOKS AS THOUGH THE MOTOR WAS REBUILT BUT CAN'T BE SURE. SO THIS WILL BE AS IS.
DEWALT 18" RADIAL ARM SAW
THIS IS A DEWALT 18" RADIAL ARM SAW. IT HAS BEEN IS STORAGE FOR MANY YEARS AND I DON'T KNOW IF IT RUNS OR NOT, SO THIS IS AS IS CONDITION.
Delta 10" Radial Arm Saw 110 Power Used But In Great Working Condition
Delta 10" Radial Arm Saw 110 Power Used But In Great Working Condition! This is a Great Piece Of Machinery. Just No Longer Needed In Our Production! Please see my other auctions for more equipment at reasonable prices. Local Pickup Only On This Item, From New Strawn, Kansas, Unless Shipping Can Be Arranged! Item Can Be Viewed At 308 N. Industrial, New Strawn, Kansas, By Appointment. Please Call Ron At 620-203-0652. Thank You.
ALPINE ENGINEERED PRODUCTS MODEL 405A COMMERCIAL TRUSS 3 PHASE RADIAL ARM SAW GD
Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Manufactured by Alpine Engineered Products.MODEL 405A RADIAL ARM SAW. 3 phase motor. Good for heavy duty projects. Call Ernie 602-421-8082 Heavier unit than Delta OR ANY REGULAR BRAND ANY QUESTIONS. CALL ME PLEASE AND THANKS FOR LOOKING LOCATED IN GILBERT. ARIZONA CALL GARY AT 480-694-9479 WITH ANY FREIGHT OR PAYMENT QUESTIONS UNIT IS SUBJECT TO PRIOR SALE AND IS SOLD"AS IS WHERE IS" OUR EBAY FEEDBACK SPEAKS FOR ITSELF. ANY QUESTIONS. CALL GARY AT 480-694-9479 OR EMAIL ME. YOUR QUESTIONS ARE IMPORTANT. BUYER RESPONSIBLE ... moreFOR THEIR LOCAL SALES TAX.
Dewalt Radial Arm Model 790 12" Contractors Powershop, 110V, Used
You are bidding on a Dewalt Radial Arm Model 790 12" Contractors Powershop. Wired for 110V now. Can be wired for 110/208-240 Volts. Single phase. Table top is 47" X 27" X 1 7/16" thick. I have plugged it in and it runs fine. This can be picked up. Condition of item: Not the same as Ebay's canned condition statement) Auction Item purchased at auction so we are selling as is. We have 77% discounted shipping rates for large palletized items. The trucking conpany delivering this MUST HAVE YOUR PHONE NUMBER! Reference& Location# xxxx/xxxx R510 Please Read Before Bidding My Buying& Selling Terms Payments I accept Paypal. Please pay ASAP. If you have reasons for a delay let me know. My Shipping Policy I base all my shipping on the UPS rates. You the buyer pay all shipping costs. However I do give FREE INSURANCE FOR ... moreUPS AND FED EX SHIPMENTS. I reserve the right to ship via other carriers. Even though I base my rates on UPS. Sometimes one is more convenient than others. Resolution of Problems If there are any problems with this sale contact me via email and I will solve the problem. I take pride in customer satisfaction. My Return Policy Pictures 150 + Lb Items Handling Fee Ebay Store Item Description All Sales Are Final. Please ask questions first. If I don’t know the answer I will find more info for you. Even if the item ends while I’m finding the answer keep in contact because I will be relisting it for you. If you need more details ask for more pictures. I can email them to you, include email address. If your item weighs over 150 pounds we can help arrange shipping. We get a 77% discount from a large trucking company. We will ship it as a collect shipment. I charge a $30.00 handling fee for large heavy items. We might lower this if you pick the item up. http:stores.ebay.com/Your-Surplus-Riches What you see in the picture is what you will receive. Unless additional parts are mentioned in the ad, assume there are none.
Speed Cut RAS-12 Heavy Duty Radial Arm Saw
Speed Cut RAS-12 Heavy Duty Radial Arm Saw Speed Cut Industrial Radial Arm Saw Looks to have a 21” blade. Model RAS-12. Serial S0589 5HP 3 Phase motor This machine came from a working environment and appears to be well maintained. Shipping will be VIA freight– please let me know if you would like a shipping quote. There will be a $75.00 charge for crating and preparing for shipment. Local pickup is also available at no charge. This is being sold as a used working item. If the item is not functioning(unless otherwise noted in the description above) or if you feel it is not as described we will take it back and refund your money. You must notify us within seven days of receipt if you have an issue with this item and return the item in its original packaging. Batteries and plastic socket/ tool trays are not included in our warranty.
DEWALT GE634 RADIAL ARM SAW 16" 5 HP SINGLE PHASE 230V
USED EXCELLENT CONDITION DEWALT 16" 5 HP RADIAL ARM SAW. UNUSUAL TO FIND A 5 HP ONE THAT RUNS ON SINGLE PHASE POWER. AFTERMARKET ON/OFF SWITCH. ARM IS IN GREAT SHAPE. BEARINGS ARE NICE AND TIGHT, NO SLOP SEE MY OTHER LISTING FOR OTHER MODELS. BUYER PAYS FREIGHT SHIPPING ON 650LBS FROM 30527 OR FREE LOCAL PICKUP IN NORTH GEORGIA. 012-06-04-145/752 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY ... moreREASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or
BLACK & DECKER DELUXE POWER SHOP OLD RADIAL ARM SAW LONG ISLND PICKUP CASH ONLY
Visit My eBay Store: DYNAMITE SURPLUS Be sure to add me to your favorites list! SITTING A LONG TIME WORKS WELL. FROM 60'S? IT WILL CLEAN UP NICE WITH A LITTLE ELBOW GREASE READS BLACK AND DECKER ON ARM AND HAS DEWALT NAME ON SIDE OF BLADE AS WELL. NOT SURE IF THEY WERE SAME COMPANY OR WHAT I THINK THE MODEL NUMBER IS DELUXE POWER SHOP( EBAY WILL NOT ALLOW ME TO USE CERTAIN WORDS REGARDING PAYMENT TYPE. WE ALL KNOW WHAT GREEN PAPER MEANS) PLEASE LEAVE CONTACT EMAIL AND/OR TEL. NUMBER ABSOLUTELY PICK UP ONLY- NO EXCEPTIONS- LOCATED IN ISLAND PARK LONG ISLAND N.Y. I DO NOT DELIVER NO EXCEPTIONS PLEASE LEAVE EMAIL AND/OR TEL. NUMBER TO ARRANGE PICKUP OR CALL 516 5154138 TO LEAVE MASSAGE WITH YOUR TEL NUMBER PAYMENT TERMS: GREEN PAPER ONLY UPON PICK-UP PLEASE SEE PICTURES FOR MORE INFO Customer Service- 5 Star Commitment! We are committed ... moreto your satisfaction. We have over 4500 positive feedbacks and an impeccable feedback rating. We are dedicated to earning a positive feedback and a 5-star rating in all categories from every customer. Here is our commitment to you: Item Descriptions: Very Accurate. We take our own pictures for most all listings and we will tell you when we are using a factory picture for reference purposes. we write all of our own custom descriptions so you know exactly what you're getting. No surprises. Communication: Very Responsive. We answer all emails within one business day! Status updates are automatically emailed at every step of the order process! Time to Ship: Very Quick. We ship all orders within one business day of payment! SOMETIMES THE SAME DAY! You can choose from many shipping speeds. From First Class to Express! Shipping Charges: Very Reasonable. No inflated shipping! When there is a charge for shipping we caculate only the overall weight of the item with proper packing material and is always the actual cost for domestic shipping. We NEVER CHARGE for HANDLING! Overall Satisfaction: Very Positive. 100% Satisfaction Guarantee;A
VINTAGE AMF DE WALT 9" RADIAL ARM SAW MODEL MBF 110 VOLTS
This Item is a Vintage AMF DeWalt 9" Radeal Arm Sa w, it is hard to find in GOOD working Condition I have used and tested it. I have only Cross cut with it but It also Rip. Miter and also will Bevel Rip, Bevel Miter. It is model MBF 110 volt serial#24420. Do to the weigh of the saw it is a Pickup only Item. Must leave a deposit of $50.00 via PayPal within 24 hours of sell or end of auction. being sold as is. Thanks for looking and good Luck bidding.
DeWalt 740 Powershop 10" Radial Arm Saw Single Phase Cross-cut, rip, miter
great working dewalt saw everything works as it should table size is 44 x 31 overall unit is 5 feet tall very nice running saw local pick up only
omga radial arm saw
used omga 14 inch 5hp 230 volt 3 phase radial arm saw in good working order with 24 inch cross cut.
DEWALT GP RADIAL ARM SAW 12"
Manufacturer: Dewalt Serial# 22691 Model# GP Item Capacity 12" The item is in good condition
*CRAFTSMAN RADIAL ARM SAW ACCESSORIES/ATTACHMENTS* VINTAGE*
CRAFTSMAN 10" RADIAL ARM SAW ATTACHMENTS* 1- SHAPER FENCE ATTACHMENT WITH MOUNTING BRACKET 1- SAW DUST COLLECTOR US 341724 11" X 10" SQ TOP WITH 4" TUBE HOLE STEEL ARM ATTACHMENT 1970'S ERA GREAT CONDITION GREAT DEAL
2-craftsman radial arm saw angle iron leveling brackets
2-craftsman radial arm saw angle iron leveling brackets Good condition Slight bend on end of bracket but still works fine Posted with
FOOTBURT JACK-KNIFE ARM RADIAL DRILL
FOOTBURT JACK-KNIFE ARM RADIAL DRILL PROPOSAL Model: Serial Number: 2025- 47 Specifications: 54" MAXIMUM DRILLING DISTANCE FROM COLUMN 7" SPINDLE 24" ARM VERTICAL TRAVEL 95 TO 1140 RPM(6) SPINDLE SPEEDS# 3 MT SPINDLE MANUAL ARM ELEVATION RIGHT ANGLE TABLE 440 VOLT/ 2 HP/ 3 PH MOTOR FOB: Dallas. TX ALL SPECIFICATIONS SUBJECT TO VERIFICATION SELLER DOES NOT WARRANT THAT USED MACHINERY/EQUIPMENT COMPLIES WITH O.S.H.A SAFETY STANDARDS. THEREFORE, COMPLIANCE BECOMES THE RESPONSIBILITY OF THE BUYER.
SEARS 34IN.CRAFTSMAN RADIAL ARM DRILL PRESS 5 SPEED 1/3HP
UP FOR BIDS IS A 34IN. SEARS CRAFTSMAN RADIAL ARM DRILL PRESS 1/3HP 5 SPEEDS WITH A 1/2IN CHUCK ALSO THE KEY COMES WITH IT ONLY THING I DO'NT HAVE IS THE YELLOW SAFETY LOCK KEY.SEEN THEM ON E-BAY FOR $7.00 TO $12.00 WORKS GREAT IT TURNS ON WHEN IT'S PLUGED IN FOR NOW,IT CAN BE SHUT OF WITH A SQREW DRIVER OR SOMETHING, SELLING AS IS THANKS PICK UP ONLY IT'S TO HEAVY AND EXPENSIVE TO SHIP ALL MOST 100LBS. Check out my other items!
Walker Turner Radial Arm Saw 10 in
10' WALKER TURNER RADIAL ARM SAW 220 VOLT NO WAY TO TEST 220 VOLT TO SEE HOW MOTOR RUNS SELLING AS IS. HAS ORIGINAL BASE. SEEN NO BROKEN OR WELDED PARTS
Anti-Kickback Fingers w/Handle For DeWalt, Delta, Craftsman ? Radial Arm Saw
Anti-Kickback fingers. With handle for the radial arm saw. Total length is 10" with 1-1/2" fingers on a 1/2" round handle with a flat side. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases,on the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
Archdale Radial Arm
We are selling one(1) Archdale Radial Arm. This is a used machine and selling as is. 15"col. and a 5' Arm. Please email us with questions or concerns. And check out our other auctions!
Cincinnati Bickford Radial Arm
We are selling one(1) Cincinnati Bickford Radial Arm. This is a used machine and selling as is. Run but needs a setup. Please email us with questions or concerns. And check out our other auctions!
Frankfurt Bricks for radial arm polisher
Frankfurt Bricks for radial arm polisher for granite and marble. These were used on a park wizzard. This is well over $1000 original cost. Marble 2m 24 4m 14 4.5m 6 5m 6 10p 5 FG 9 Granite 24g 11 36g 3 60g 3 180g 3 220g 6 400g 6 800g 6 3000g 6 5000g 6 Total 114 bricks
ACRA RADIAL ARM DRILL PRESS
ACRA RD 1300 RADIAL ARM DRILL 12" COLUMN. 4' ARM VIDEO Machine is in good running condition Under power on our floor in Cleveland Call 216 470 0270 for more information Machine weighs 6.000 lbs FREE loading on YOUR truck Ships worldwide(any prep is at buyers expense) PLEASE CONTACT SELLER PRIOR TO PAYMENT!
Bickford 19” Radial Arm Drill w/ Right Angle,Knee Table 14025
in titles& description Name: Bickford 19” Radial Arm Drill w/ Right Angle.Knee Table, Ticket# 14025, Size: 19" Manufacturer: Bickford, Item located at: Morrisville. PA, Serial# 6NE105, Year: 1959, Condition: Used, Terms& Condition: As is where is, Selling Price: $7950.00 Description: Normal 0 false false false EN-US X-NONE X-NONE Bickford 19” Radial Arm Drill with Right Angle. Knee Table and Vise 1959. Spindle Speeds: 18-2300. 19” Column. 480v. 10-8”H. Overall Weight: 29.180. Ticket: 14025-10427 Additional information will be posted as it becomes available. PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION Subject To Prior Sale. | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers ... morePlace Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
DeWalt Model GE 13 Radial Arm Saw
DEWALT GE MODEL 13 RADIAL ARM SAW WITH A MODIFIED STEEL TOP CUTTING TABLE 20 INCH BLADE 7.5 HP THREE PHASE WITH THE MOTOR STARTER"THIS IS THE BIG DOG STEEL CUTTER" FREE SHIPPING THIS SAW IS IN PERFECT WORKING ORDER NOW IS THE TIME TO BUY SEND ME YOUR BEST OFFER SHIPPING WILL BE ARRANGED THRU USHIP.COM HANDLING TIME IS ABOUT A WEEK. USHIP.COM IS A BIDDING SITE FOR HOTSHOT TRANSPORTATION AS SEEN ON TV AS SHIPPING WARS
VINTAGE DEWALT 230 FRAME RADIAL ARM SAW MOTOR 1 HP 3500 RPM 120V 9.7A EXCELLENT
This is a vintage Dewalt AMF 1HP Motor in excellent operating condition, for use on various DeWalt Radial Arm Saws. Here are the specs: Dewalt AMF 1 HP Radial Arm Saw Motor Frame 230 Model 500180-00 1HP 3500 RPM 120 Volt 9.7 Amp 60 Hz Serial Number 60110487 Works on Dewalt radial arm saws 925.1200, 1400, and 7770 Manufactured between 1960& 1989 Will power a 8" blade effectively Motor weighs 22-1/4 lbs. The cord has been cut off and will need to be replaced Please study the pictures and email with any questions. Thanks for stopping by. FAST SHIPPING INCLUDED in the lower 48 U.S. states. All others must email for a shipping quote before buying. Shipping weight is 24 lbs.
Rockwell 12 RAS 12"single phase radial arm saw.
Nice running machine. It is 1.5 HP and ready to use. Feel free to contact me with your questions and I will do my best to help. PLEASE FEEL FREE TO EMAIL OR CALL ME WITH ANY SPECIFIC QUESTION. THANKS, DANNY 757-544-7206 SHIPPING IS THE RESPONSIBILITY OF THE WINNING BIDDER. WE CAN HELP IN FINDING A SHIPPER IF NECESSARY. JUST EMAIL YOUR ZIP CODE. MACHINE WEIGHS APROX. 500LBS. Powered by The free listing tool. List your items fast and easy and manage your active items.
Delta Radial Arm Saw 5HP 230/460v 35-411 400-06-137-0002
Delta Radial Arm Saw 5HP 230/460v 35-411 400-06-137-0002 Part No. 400-06-137-0002 Cat No. 35-411 Serial No. 93J26923 41" Table Length 34-1/2" Table Height Delta Electric Motor 438-02-314-2034 5 HP. 3450 RPM 230/460 Volt. 3 Phase 60 HZ. 13/6.5 Amps Estimated Weight: 850 lbs. 0213.1 AB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: ... morePlease provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Mo
Dewalt MBF MBC Radial Arm Saw: Miter Rotation Indexing Handle
Dewalt MBF& MBC Miter Rotation Indexing Handle We have several of these Dewalt 9" Radial Arm Saws(MBF/MBC) that we have parted out. Contact us if you have other part inquiries. We have arms with clean ways. Yokes, handles, rip loc k. Rip scales, columns. Bases, column caps, elevation crank assemblies. Angle lock handles, bevel lock handles. Motor caps, motor relays, king bolt. Carriage. Etc. etc. etc. This is a Miter Rotation Indexing Handle for a MBF/MBC Dewalt Radial Arm Saw. Picture is of actual item. Terms& Conditions: US bidders only! All auction sales are final. Accepted payments include PayPal(WE WILL SHIP TO CONFIRMED ADDRESSES ONLY) Item shipped within 2-3 business days of funds being received. S/H is FREE to all 50 states. Shipping costs are reflective of fast and prompt shipping via USPS or FedEx.
Dewalt MBF MBC Radial Arm Saw Rip Lock Arm Clamp
Dewalt MBF& MBC Rip Lock We have several of these Dewalt 9" Radial Arm Saws(MBF/MBC) that we have parted out. Contact us if you have other part inquiries. We have arms with clean ways. Yokes, handles, rip loc k. Rip scales, columns. Bases, column caps, elevation crank assemblies. Angle lock handles, bevel lock handles. Motor caps, motor relays, king bolt. Carriage. Etc. etc. etc. This is a rip lock for a MBF/MBC Dewalt Radial Arm Saw. Picture is of actual item. Terms& Conditions: US bidders only! All auction sales are final. Accepted payments include PayPal(WE WILL SHIP TO CONFIRMED ADDRESSES ONLY) Item shipped within 2-3 business days of funds being received. S/H is FREE to all 50 states. Shipping costs are reflective of fast and prompt shipping via USPS or FedEx.
Omga 800 5 hp radial arm saw hardly used 31" crosscut
Very. Very few hours on this RADIAL 800 P3S $100 crating fee for shipments. loads for free from a loading dock with forklift Technical Data Cross cut capacity 31 Max. Depth of cut-90 4 1/2" Max. Depth of cut-45 3 3/16" Ripping capacity 39 5/16" Motor power HP 5 Saw Blade bore 1" Saw Blade diameter 14" Max. dado capacity 1 1/2" Arbor speed RPM 3200 Miter positive stops 45-0-45 Bevel positive stops 0-45 0 Table size 40"x35" Overall dimensions 47"x51" Crated dimensions 65"x18"x46" new cost $5100 Ships FOB your freight account or freight collect I recommend ODFL(302)322-2801-ask for a"4848 rate" dimensions 42"X48"X72" tall-weight 850# Class 100 ships from a commercial address with loading dock and forklift at 19363 Oxford You will need to pick it up at the ... moreterminal unless you are commercial with loading dock or forklift or can ship to someone who is.
Dewalt MBF MBC Radial Arm Saw : Arbor Collars and Nut
Dewalt MBF& MBC Arbor Collar Set w/ Arbor Nut We have several of these Dewalt 9" Radial Arm Saws(MBF/MBC) that we have parted out. Contact us if you have other part inquiries. We have arms with clean ways. Yokes, handles, rip loc k. Rip scales, columns. Bases, column caps, elevation crank assemblies. Angle lock handles, bevel lock handles. Motor caps, motor relays, king bolt. Carriage. Etc. etc. etc. This is the complete arbor set(2 c ollars/washers and nut) for a MBF/MBC Dewalt Radial Arm Saw. Picture is of actual item. Includes mounting screws. Terms& Conditions: US bidders only! All auction sales are final. Accepted payments include PayPal(WE WILL SHIP TO CONFIRMED ADDRESSES ONLY) Item shipped within 2-3 business days of funds being received. S/H is FREE to all 50 states. Shipping costs are reflective of fast and prompt shipping ... morevia USPS or FedEx.
Dewalt MBF MBC Radial Arm Saw: Cast Iron Arm with Dewalt Badges
Dewalt MBF& MBC Cast Iron Arm with Clean Bearing Ways Inc ludes Dewalt Badges We have several of these Dewalt 9" Radial Arm Saws(MBF/MBC) that we have parted out. Contact us if you have other part inquiries. We have arms with clean ways. Yokes, handles, rip loc k. Rip scales, columns. Bases, column caps, elevation crank assemblies. Angle lock handles, bevel lock handles. Motor caps, motor relays, king bolt. Carriage. Etc. etc. etc. This is a cast i ron for a MBF/MBC Dewalt Radial Arm Saw. Picture is of actual item. This weighs approximately 35lbs. Terms& Conditions: US bidders only! All auction sales are final. Accepted payments include PayPal(WE WILL SHIP TO CONFIRMED ADDRESSES ONLY) Item shipped within 2-3 business days of funds being received. S/H is $39.99 to the lower 48 states only. Shipping costs are reflective of fast ... moreand prompt shipping via USPS or FedEx.
Radial arm saw Delta , 5hp , 16" , 3phase
one) Radial arm saw. Delta, model 33-073, s/n 89C12416, 5 hp, 200/208/400 vac, 3 phase, 3450 rpm. 16" blade, 24" travel. Head bevels and rotates. Arm rotates. 28" x 42" table. Very clean. 100 tooth carbide blade. $295 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-7601, 02, 03, 04, 05 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $295.00 tru International Shipping. $2500.00 sea FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
DeWalt Radial Arm Saw 10” Model GWI S/N 280843: This saw is a dandy, I ran one a
0 0 1 213 1220 Full Moon Boat Works 10 2 1431 14.0 Normal 0 false false false EN-US JA X-NONE DeWalt Radial Arm Saw 10” Model GWI S/N 280843: This saw is a dandy. I ran one as a kid and when I needed another for a special project I sought it out. The project is complete and no longer need it. The saw is in great shape. The GX-1 will run on 120 or 220 volts with the flip of a switch. Don’t think this is a saw like a Sears saw or a cheap saw you find in the big box stores. It is a quality built tool for the serious wood worker. Built in the late1950’s all cast construction weighing 215 Pounds. There are two of the original booklets with the saw; Instruction Maintenance and Parts Book” copyright 1957 and a nineteen page DeWalt Power Shop” showing all twelve operations the saw is capable of preforming with additional options(NOT INCLUDED) and ... moremany operational tips. There are two of the original booklets with the saw; Instruction Maintenance and Parts Book” copyright 1957 and a nineteen page DeWalt Power Shop” showing all twelve operations the saw is capable of preforming with additional options(NOT INCLUDED) and many operational tips. The saw is skidded. Wrapped in cardboard and wrapped in stretch wrap. Ship by common carrier, freight paid by buyer, additional insurance is strongly encouraged, the trucker will only cover $25.00 for damaged used equipment. The seller will not be held liable for any damage during shipping. Net weight 215 pounds. Approximate size 56” tall x 47” wide x 29” deep.
ROCKWELL DELTA 16" RADIAL ARM SAW WITH HUGE CUT TABLE 3 PHASE 16-RAS
USED EXCELLENT CONDITION ROCKWELL DELTA 16" RADIAL ARM SAW MODEL 16-RAS. WORKS GREAT. INCLUDES VERY HEAVY DUTY INFEED AND OUTFEED TABLES. BUYER PAYS FREIGHT SHIPPING ON 750LBS FOR THE SAY ALONE FROM 30527, SEPARATE SHIPMENT OF 450LBS PLUS FOR THE TABLES OR FREE LOCAL PICKUP IN NORTH GEORGIA. 012-06-04-320/650 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT ... moreTO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted
Delta Radial Arm Saw 33-401 This Is A 6000$ Saw!!
Delta 33-401 saw for sale great saw! Buyer arranges and pays shipping. I will load free on whatever truck is arranged Here is the prod spec sheet from website: View all DELTA Machinery products Product Description Delta 33-401 14" Radial Arm Saw 5HP. 230 Volt, After nearly 90 years of expertise in the woodworking business. DELTA Machinery has become one of the most revered brands in woodworking tools today. DELTA Machinery focuses on innovations to help the woodworker create masterpieces easier and with more precision. Delta 33-401 14" Radial Arm Saw 5HP. 230 Volt, Features: Exclusive. Turret Arm" construction permits the sawblade to rotate a full 360° above the work table. Gives full table capacity for cutting both right and left hand miters. Unique. Micro-Set" miter stops assure perfect right& left miter cuts ... morefor the life of the saw. Lifetime. Track rods feature glass-smooth hardened surfaces to minimize roller friction. Up-front operating controls are conveniently located for safe. Easy operation. Six positive. Convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy. Table measures a full 44" X 36-1/2" Convenient fence lock knobs allows user to adjust and lock-in the desired fence position at front of the machine. Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut. Extra-long turret arm provides maximum outboard rip and crosscut. Delta 33-401 14" Radial Arm Saw 5HP. 230 Volt, Specifications: Motor: 5 HP. 3 Phase, 230/460V(wired 230V) 60 hz, 3450 RPM, TEFC(totally enclosed, fan cooled) motor• Motor Control: 24V Push-Button Station. Magnetic Starter, Transformer and Overload Protection(LVC) Blade Diameter: 14• Arbor Size: 1" 25 mm) Crosscut Capacity(1" depth of cut) 29" 737 mm) Miter at 45° R& L(1" depth of cut) 22" 559 mm) Depth Of Cut At 90 Degrees: 4" 102 mm) without leaf guard: 4-1/16" 117 mm)
2003 OMGA 5 HP RADIAL ARM SAW WITH 19' BENCH AND COMPUTERIZIED CONTROLLED STOP.
Please read before bidding: TO AVOID SHIPPING DELAYS. PLEASE PROVIDE NAME OF BUSINESS AND PHONE NUMBER WITH PAYMENT. THANK YOU! IF PAYING WITH PAYPAL. I WILL ONLY SHIP TO THE ADDRESS THEY PROVIDE. I accept all forms of paymentand can accept credit cards through paypal. Please have patience with questions and shipping quotes. I have just picked up from a huge wood shop that closed down. The power was off and everything disconnected so I wasn't able to test it. I ran into a previous employee when I was loading this up and he told me the saw worked good but the computerized stop did not work. I prefer local pick up. This 19 feet and 2 inches long and heavy. I may be able to ship but it will be VERY expensive. Not quite sure on the model. I think UPM3400. 230-460 VOLTS, S/N 302280. Lower right of Id tag reads 2003, so I figure that is the ... moredate of manufacturer. 5 HP and set up for 480 volts, and 3 phase. Shroud has a 4" chunk missing also the computerized stopper is partailly disassembled. If you have immediate questions or negotiations(602) 908-3006. Check my 100% positive feedback and bid with confidence. LOCAL PICK UP IS FREE! I HAVE A FORKLIFT. I get a 81% discount with my frieght company. Payment required within 7 days of auction close. A check may require a 10 day hold. What you see is what you get. There isn't any hidden accessories.
CRAFTSMAN PROFESSIONAL RADIAL ARM SAW TEN INCH BLADE GUARD 976879
UP FOR AUCTION CRAFTSMAN PROFESSIONAL RADIAL ARM 10 INCH BLADE GUARD. NUMBER 976879. THIS GUARD LOOKS LIKE IT TAKEN WHEN THE SAW WAS NEW, AND LAYED ON THE SHELF. VERY GOOD CONDITION, IS MISSING ONE NUT. THANKS FOR LOOKING ANY QUESTIONS PLEASE ASK.
ROCKWELL 16 INCH RADIAL ARM SAW MODEL 16-RAS
We have for sale a used ROCKWELL 16 INCH RADIAL ARM SAW MODEL 16-RAS. The table measures 44 1/2 inches wide and 29 inches deep. Some of the adjustment are tight and will need loosened up. It is also missing the guard off of the blade. The cover on the electrical box is also missing. BE SURE AND LOOK AT PHOTO TO SEE THE PARTS THAT ARE MISSING. The photos tell all that we know about it. It is being sold UNTESTED AS We do not have the expertise to test it so it is being sold as is with no warranty implied. We only accept Paypal as a form of payment. If you have any questions email them and we will try to answer them. WE SHIP ONLY TO THE UNITED STATES. BUYER IS TO PICK UP AT OUR LOCATION OR ARRANGE THEIR OWN SHIPPING. THE WEIGHT WOULD BE APPROXIMATELY 750 POUNDS. Powered by The free listing tool. List your items fast and easy and manage your ... moreactive items.
Dewalt MBF MBC Radial Arm Saw: Yoke
Dewalt MBF& MBC Yoke We have several of these Dewalt 9" Radial Arm Saws(MBF/MBC) that we have parted out. Contact us if you have other part inquiries. We have arms with clean ways. Yokes, handles, rip loc k. Rip scales, columns. Bases, column caps, elevation crank assemblies. Angle lock handles, bevel lock handles. Motor caps, motor relays, king bolt. Carriage. Table cleats. Etc. etc. etc. This is a yoke for a MBF/MBC Dewalt Radial Arm Saw. Terms& Conditions: US bidders only! All auction sales are final. Accepted payments include PayPal(WE WILL SHIP TO CONFIRMED ADDRESSES ONLY) Item shipped within 2-3 business days of funds being received. S/H is $12.99 to all 50 states. Shipping costs are reflective of fast and prompt shipping via USPS or FedEx.
(1) Used 4' Soraluce Model TRO-1250 Radial Arm Drill
1) Used 4' Soraluce Model TRO-1250 Radial Arm Drill Specifications: Arm length: 49.2" Column diameter: 11.8" Drilling capacity- mild steel: 2" iron 2 1/8" Motor: 5 HP Speeds(12) 29-1700 RPM Feeds(6) 005"013" Spindle taper: 5 MT Spindle stroke: 11 3/4" Head travel on arm: 37 1/2" Arm travel on column: 27 1/2" Max height under spindle 52 1/4" Base working area: 52 1/2"x39 3/4" Equipped with: Power elevation& power clamping Power spindle down feed Box table FOR MORE IN FORMATIO N ON THIS MACHINE OR ANY OTHERS PLEASE CALL JEFF AT MACHINERY NETWORK 888-998-440
Omga Radial Arm Saw 600 p3 18 inch crosscut 5hp
more photos of grinders and moulders and used inventory here: To request a short video of this OMGA 14 inch radial arm saw running. Send us your e mail at pleasantstmachinery@ G mail. com if you want to see it. Pleasant St Woodworking Machinery has been rebuilding equipment for 20 years and working with wood for 40 years. Our customers are industrial manufacturers. Skilled craftsmen, and high end hobbyists looking for the right machine for the job. Our 20,000 square foot warehouse and full metalworking shop is located in DeKalb, Illinois. We completely go through, run, and test the used machines we sell. 815)758-6534 Omga 600 p3s radial arm saw, 18 inch cross cut. Up to 14 inch blade, needs only a table, Ways and arm bearing rollers are very tight. Not much evidence of use. No evidence of motor heat. Bearing chatter, or vibration, sold as ... moreis in running condition, 5.0 hp motor wired 240v/440volt 3phase. Shipping will be on a pallet 48 inch x 60 inch. 50 inch tall, weight 650 lbs. We get great freight rates, call with zip code of business address. Should be around $125-$325 in U.S. Residential adds about $100) Call us for a video*815*758-6534. Local pickup is always welcome, by appointment. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized in rebuilding American machines that are ready to work and do what you want them to do. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You!
Craftsman 113.198611 10” Electronic Radial Arm Saw with 6-Drawer Cabinet Base
The Auction Store Item Description: This is a Sears Craftman Model 113.198611 10" electronic radial arm saw with a 6-drawer cabinet base. This saw was retired from service and placed in storage pending auction sale. The operating condition of this saw was not tested because of its current location. Online research indicates that this saw qualifies for a recall of the blade cover assembly which can be obtained by going to'radialarmsawrecall.com' however. There is also a lot of discussion regarding issues with the electronic component and LED readout. The circuit board is no longer available, and many owners have had to resort to manual methods of setting angle and miter on the cut. Interested bidders should assume that this unit has a faulty board, but likely still functions without the aid of the LED readout for angle and miter ... moresettings. Please bid accordingly. Additional Details: Overall Dimensions: 44"W x 28"D x 56" H(as shown in pictures) Work Table Height: 37" Electrical Input Required(as wired) 120VAC/1PH/60Hz Owners Manual can be obtained at: vintagemachinery.org/pubs/222/2861.pdf Motor Specifications: SN: 89059.M0212 MOTOR SPECIFICATIONS: RATED H.P. 1.5 MAXIMUM DEVELOPED H.P. 2.75 VOLTAGE. 120/240VAC AMPERES. 12/ 6 PHASE. SINGLE RPM. 3450 Condition: This item could not be tested to confirm operating status. It is used. But operational status was not confirmed. Because of issues known to exist with the electronic cicuitry of this tool, it is being listed as non-operational. Please bid accordingly. Pickup Logistics: Pickups for this item and others listed for this client will be on Wednesday. April 24th from 9:00am to 2:30pm by appointment. Winning bidders will be given pickup information to the location once payment has been made
Dewalt Model 3573 Heavy Duty Radial Arm Saw
Dewalt Model 3573 Heavy Duty Radial Arm Saw Model 3573. Type 1 3 HP 3 Phase Motor 16” capacity. Looks like a 14” blade installed Includes steel stand and motor starter This machine came from a working environment and appears to be well maintained. Shipping will be VIA freight– please let me know if you would like a shipping quote. There will be a $75.00 charge for crating and preparing for shipment. Local pickup is also available at no charge. This is being sold as a used working item. If the item is not functioning(unless otherwise noted in the description above) or if you feel it is not as described we will take it back and refund your money. You must notify us within seven days of receipt if you have an issue with this item and return the item in its original packaging. Batteries and plastic socket/ tool trays are not included in our warranty.
Delta Rockwell 14" Radial Arm Saw, 3HP, 3PH, O.K. Cond
Delta Rockwell 14" Radial Arm Saw 3HP 3PH motor As is. As taken from service and stored at a production facility. Machine can be loaded at no charge. Please Email or call 1-800-793-4494 if interested in this machine. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping and freight costs associated with getting this machine to your location. Pick-up of this machine is available also. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to prior sale. May be withdrawn from sale at any time as it is listed on our website and in other advertising. TERMS: Immediate Payment with order. Full payment or deposit required within 24 hours of purchase. Items with no payment ... moreor deposit after the 1st seven days will be immediately reported to eBay as unpaid. Cash in person. M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. Powered by The free listing tool. List your items fast and easy and manage your active items.
CASER RADIAL ARM DRILL
CASER Model F40 RADIAL ARM DRILL 11" Column; 40" Arm Call Gil at 812-499-7998 for more information
USED IKEDA 4.5' X 13" RM1300 RADIAL ARM DRILL #5M.T. POWER ELEVATION
Used 4.5’ x 13” IKEDA RADIAL ARM DRILL MODEL: RM1300 ♦ YEAR:1978 Specifications Capacity: Steel Iron Drilling: 2-1/4” 2-5/8” Tapping: 1-3/4” 2” Boring: 4” 6” Column Diameter: 13-5/8” Arm Length: 54-1/2” Face of Column to Center of Spindle: 9” min. 52-5/8” max. Spindle to Base: 15-1/4” min. 56-3/4” max. Working Surface of Base: 57-1/4” x 36” Height of Base: 8-1/2” Vertical Travel of Spindle in Head: 12” Spindle Diameter(driving dia. 3-5/8” Morse Taper in Spindle: 5 Traverse of Head on Arm: 47” Feed and Tap Leads: 4) 0.004” 0.021” rev Spindle Speeds: 12) 30-1.440 rpm Drive Motor: 5 HP Dimensions: 82” x 36” x 96” Weight of machine(less motor) 7.700 lbs. Equipped with: ¨ Power elevation ¨ Power clamping ¨ Coolant We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact ... moreus. 800 899 8182 ext. 208 Check out my! PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately
Drill Radial Arm Drill 5' x 13" WMW Model BR60-1600-GH (2001)
5' x 13" WMW Model BR60-1600-GH 5' x 13" Radial Arm Drill(2001) Specifications Cross Travel Of Head On Arm: 60" Column Diameter: 13.0" Vertical Travel Of Arm On Column: 30" Feeds: 0015"025" Quill Dia: 4" Quill Travel: 12.4" Main Drive Motor: 5.4 HP, Spindle Speed Range: 36-1600 RPM, Equipped With: Power Elevation. Power Clamping, Power Rapid Traverse, Machine being sold As Is. Where is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
SAW RADIAL ARM POWER KRAFT JAPAN working •••• ALL OR PART •••• ~~• } ((((º ~•
I've had two of these. They're as noisy when just idling as they are when cutting. On acount of the gear train. But it is an excellent tool because that provides the high-speed accessory shaft and allows the output shaft to be located close to the bottom of the motor case. It cuts four-by lumber in one pass. You can come and get it. I have it partly disassembled for shipping. Take all or part. In total it weighs maybe 140 pounds. So, count on the actual shipping being at least four times what Ebay indicates. It's in decent condition. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies ... moreand CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items.
Delta Rockwell 14" radial arm saw woodworking pallet maker machine
Bidders please read the ad. Welcome to another listing by Best Bay Machinery Sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. This listing is for the following. You Are Bidding On A Pre-Owned Delta Rockwell 14" RAS saw Model 14-RAS 230 v 3HP 3 phase. info from manufacturer for reference, Blade Diameter, 14" Table Type, Table Height, Table Size with Standard Extension(L x W) Table Size without Extension(L x W) 50x40x60 H Dust Port Dust Collection Minimum CFM Required, n.a. Dust Collection Adapter Port, n.a. Leg Stand with Steel Storage, n.a. Miter Gauge Type, Deluxe Motor Power, 3 HP, Motor Voltage, 230/460 V Motor Current, 13 A Motor Phase, 3 Ph, Model Number, RAS-14 Brand, Delta Overall Dimensions, 50 x 40 x 60 Height, 60 inch, Width, 50 inch, ... moreLength, 40 inch, Net Weight, 675 pound, Part# Description Questions email or call BOB 773-392-5055 Terms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is lited then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of an
DeWalt Radial arm saw Model GK
GK Model DeWalt radial arm saw. Needs TLC. I will package for shipping for a flat rate of $50.00. I am thinking that I would remove the saw from the base if needed or if the buyer requests. Actual shipping cost paid by buyer. Of course. Available for local pick up. This saw has sat idle for 3 years. When in service, it was a work horse.
CARLTON 7' ARM X 17" COLUMN RADIAL DRILL
CARLTON 7' ARM X 17" COLUMN RADIAL DRILL SPECIFICATIONS EXTENDED ARM- 7' COLUMN- 17" SPINDLE TAPER- 6 M.T. MAIN SPINDLE MOTOR- 15 H.P.230 VOLT BASE- 7'DOUBLE END SPINDLE SPEED(96) 10-1250(RPM) CAPACITY- 4" OVERALL DIMENSIONS(APPROX. 13'6" LONG X 5'WIDE X 13' HIGH WEIGHT(APPROX. 25-30.000 LBS. EQUIPPED WITH- ADJUSTABLE SPEED MOTOR DRIVE WITH 2-SPEED CROSS DRIVE
TURN-PRO ARM RADIAL SWING DRILL PRESS 220V 4/2008 440V 3PHASE *WITH CHUCK
Check out my! TURN-PRO ARM SWING DRILL PRESS TYPE: 00693358 YEAR OF MFG 4/20 08 SET T O 220 V BUT IT CAN WORK WITH 440V AS WELL. 3 PHASE*WITH JACOBS CHUCK* IT IS IN MINT CONDITION. LIKE N EW. IT CAM E FROM SNAP-ON FACILITY Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within-7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by ... moree-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. F.O.B. SUN VALLEY.CA 91352. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to
MORRIS 5' X 11" RADIAL ARM DRILL
MORRIS 5' X 11" RADIAL ARM DRILL. S/N A1645 SPECIFICATIONS ARM LENGTH- 5' COLUMN DIAMETER- 11" SPINDLE SPEEDS(12) 56- 1500 RPM FEED RATES(6) 004- 025/REVOLUTION QUILL TRAVEL- 12-1/4" MORSE TAPER- 5 MOTOR- 5 HP/ 870 RPM VOLTAGE- 440/3/60 DIMENSIONS- 39"W X 118"L X 95"H. EQUIPPED WITH
AMERICAN 7 Ft 19 In RADIAL ARM DRILL 21801
in titles& description Name: AMERICAN 7 Ft 19 In RADIAL ARM DRILL, Ticket# 21801, Model: 77848. 7X19, Size: 7'X19" Manufacturer: American, Item located at: Hanover. MD, Serial# 77848-1965, Condition: Used, Terms& Condition: As is where i, Description: WITH 20-1600 RPM SPINDLE SPEEDS. POWER CLAMPING, POWER ELEVATION, COOLANT, CONTROLS | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Heavy Duty Steel T-Slot Radial Arm Drill Press Box Table for your Vise TSLOT
FREIGHT Shipped banded to a Pallet OR LOCAL PICKUP ONLY This item weighs about 250 pounds. I am sorry. I am not willing to box it up to ship it. I am willing to ship this item banded to a pallet. See details below about banding it to a pallet. I do not list a shipping amount. I have no way to know what zip code it will ship to before it sells and zip code and weight are of course what determines the cost, plus shipping amounts do change occasionally and at our warehouse we do have walk in customers that buy items, so I do not package items up or band them to a pallet until they sell, plus this way I can also combine items for you without repacking things which saves you money and saves me time. If you would please wait to pay until I send you an invoice, then I will get this item banded to a pallet, get a shipping quote and send you a total ... morefor the shipping amount. Of course if you want a shipping quote before you buy it, and that's usually a good idea, just send me an email. I will load it on your truck or trailer for FREE. I will not box it up and ship it via UPS or similar carrier. Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within 30 days of receiving it. And if it is in the same condition as when I first shipped it, and if you are willing to pay for shipping both ways. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 49534 616-791-9395 Buyer pays all shipping costs. If it needs to be banded to a pallet there is a $25.00 fee for the pallet. Strengthening the pallet, blocking it in with boards to keep it from moving around on the pallet and banding it. If you choose to have an enclosed van type truck and trailer haul it for you they may require you to have it crated. Not likely with this item, most will ship without having to have it crated, but If so or if you choose to have it crated there is a $40.00 fee for crating, labor, time and materials, so total $65 extra if it needs to be crated. As high bidder you agree that this item wil
Rockwell, #33-072, 16" Radial Arm Saw, 5HP 3Phase 230/460V, H Duty
Older Saw but in good condition and was working when recentlypulled from service. No Crating Charge! We ship large items all the time so we have the supplies to build a wood crate to ship it in. We're Charging shipping charge of $225 for this item but if it costs less we'll refund the difference.
DELTA 10" Professional Radial Arm Saw
DELTA 10" Professional Radial Arm Saw includes Stand. 1-1/2HP, 120/240V Motor, automatic blade brake, 10" Saw Blade, Cast-iron track. Column and column support for rigidity and continued accuracy. Depth-of-cut control handle and locking levers are positioned above the table for easy access Steel stand for sturdy support Extra-large table provides support for wide panels or large work pieces Provides greater cutting capacity for crosscutting nominal 2" thick stock up to 16" wide Miter cutting capacities in nominal 2" thick stock are 10-1/2" at 45° left and 11" at 45° right
Dewalt Auto Brake Radial Arm Saw 7749 Used
| ICE-MTE has provided quality products and services to the Cinema Industry since 1956 and is pleased to present: DEWALT Used Auto Brake Radial Arm Saw Working Good! Model 7749 Used working condition Good! Don't miss this wonderful opportunity! See our other interesting Ebay offers by going to our. Magna-Tech Electronic Company Inc. Atlanta Branch 5066 Charbett Drive College Park. GA(404) 305-0797 Thanks for visiting!
Craftsman Radial-arm table saw Model No. 113.29411
Craftsman Radial-Arm table saw in good condition. Ready to be used for a long time to come. The saw is 16 inches long. 3450 RPM, 115/230 Volts. Comes with operations handbook. The saw sits among a large table with shelf and wheels for easy job movement.
Detla Radial Arm Saw 5VN56T34006D
You are looking at a delta radial arm saw5VN56T34006D It has 1 1/2 hp I'm not too familiar with saws so please contact me before purchasing. If you have any questions contact John at 732-620-3051 Follow us on twitter- aatruckparts
SEARS CRAFTSMAN 10" RADIAL ARM SAW MITER w/ STAND on WHEELS NEW BLADE - CHICAGO
This is a used 10" Craftsman Radial Arm Saw(Part#113.197752) that I received from my Father-in-Law. It's been sitting in my garage for a few years and I have never used it.so it's time to sell it! I took a lot of hi-resolution photos so you can see exactly what you're bidding on. The saw works just fine. Motor starts right-up(and is quiet) You can make straight cuts. Miter cuts, compound miter cuts, and cut horizontally like a table saw. This saw does it all! Based on the metal tag on the motor. It looks like the motor can run on either 120 or 240 volts. It's currently setup to run on common 120 volt. It comes with the original stand on wheels. A copy of the owner manual, and a BRAND NEW 10" blade. The saw also looks like it has a vacuum attachment in the front(if needed) It looks like the wood top might need to ... morebe replaced and you can use this saw to cut it! This saw is for local pickup only in Palos Hills. IL(about 15 minutes southwest of Chicago, IL) Cash payment on pickup. If you have any questions. Please ask before bidding. THANK YOU!
16" Speed Cut Heavy Duty Industrial Radial Arm Saw 5HP/3 ph. RAS-12 220/460
16" Speed Cut Heavy Duty Industrial Radial Arm Saw Model#RAS-12 Serial# W0686 Baldor Motor 208-230/460 3 phase 5hp Includes 5 extra blades one needs repair Saw is in very good condition and is fully functional Cut is 24" deep x 6" tall and up to 10" double cut. Cuts on 3 plains x y z, Table size is 46" x 24" Weight is 800- 1.000 lbs? Buyer is responsible for all shipping but I will put this on a pallet. I also have a forklift and loading dock. If you send your info I can see about a freight quote I get a 62% Discount with FedEx Freight or can try Can also be picked up for FREE in Andrews.NC 28901 If you have any questions use the Ask seller a question link at top of page P ayment by Paypal or Bank Check or Money Order at pickup. Contact within 3 days and payment within 7 days. I can store item if paid in full ... moreas well. Freight orders are usually shipped within 2-3 weekdays of receiving payment. PLEASE see my EXCELLENT FEEDBACK and BID with CONFIDENCE Thanks for looking and Good Luck!
tool stand, radial arm saw stand
Tool stand from a Black and Decker radial arm saw. The top is 18 x 22 1/2. The base is 31 3/4 x 27 3/4, the height is 30" There is rust on the legs and some bends in the stringers. The plywood top is not included. Shipping is to the continental U.S. only. Payment is to be made within 7 days of auction close by Paypal only. Thanks for looking! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e20d32e0e-0xe9-
Original 3571 7.5HP Radial Arm Saw
Original 3571 7.5HP Radial Arm Saw General Info: Stock# 54254 Condition: Used Tested: Yes Brand: Original Model: 3571 Serial: N/A Year: N/A Weight: N/A Unit Dimensions: 62.5" W x 59" L x 73.75" T Specifications: Original 3571 Radial Arm Saw. Maximum cross cut 1" stock 33" Maximum miter 45 degrees 1" stock 24" Maximum depth of cut 5" 7.5 HP 3 ph motor. 230/460 Volt. 3425 RPM. 1" arbor. 52" arm length, 24" crosscut. 16" blade and guard size. Automatic electro-mechanical brake Additional Details: One of the locking arms are cracked in the back. Everything seems to lock up fine. Motor runs well. We are not trained mechanics or specialists of the following machinery listed and therefore can't guarantee full functionality or specs of the machine. It is always recommend to come out ... moreand inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084
Vintage Dewalt MBF radial arm saw multi guard/ shaper guard
Vintage Dewalt MBF radial arm saw multi guard/ shaper guard. Very nice vintage piece. Some paint missing from use. A few scratches on lable. No bends. Original shipping for returned items is not refunded. International buyers contact me for a shipping quote. International shipping will be by USPS priority mail. I do not ship International First Class because there is no tracking. For Alaska. Hawaii. And US territories Shipping may be higher. Contact me for a shipping quote. Contact me with any questions via ebay or call 610-449-1218. I will combine shipping on multipal orders. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e2510f59f-0xfd-
Sears Craftsman 10" Radial Arm Saw on Metal Stand Model #113.196120
999 Remington Blvd. Unit D Bolingbrook. IL 60440 Sears Craftsman 10" Radial Arm Saw on Metal Stand Model#113.196120, Powered by Title: Sears Craftsman 10" Radial Arm Saw on Metal Stand Model#113.196120 Condition: Pre-Owned. Good condition, some cosmetic wear(see photos) Tested: Powers on and saw blade spins well. Description: Sears Craftsman 10" Radial Arm Saw. Model#113.196120 on metal stand Dimensions L- 43" x 40" x 60" dust bag not included. Brand: Sears Craftsman Model: 113.196120 Location: If you are picking this item up locally instead of having it shipped. Please call or message for the location of this item. This item may not be located in our store. Thank you. Disclaimer* Please note that we do our best to describe all damage and details- dimensions are approximate by hand. If you the buyer are not happy ... morewith an item. Please see our return policy under the Returns tab below. We do NOT do partial refunds but we want every buyer to be happy with their purchase. Please read below for further description on the item. Thank you! It is our highest goal and best intention to provide exemplary customer service. Open and honest two-way communication is the key. If you feel that you cannot leave 5 star feedback for any reason. Please contact us so we may resolve the situation prior to feedback being left. Please View PHOTOS for further details pd/w847/ 67128] We accept payments via Paypal. Mastercard and Visa as well as debit cards with the Mastercard or Visa logo. We do not accept any type of International Payment at this time. Please allow PayPal ePayments at least five(5) business days to clear. Sales Tax: All State of Illinois residents will be charged state and local sales tax during the payment process. In addition. As required by Illinois state law, sales tax is required on shipping and handling charges for all shipments terminating within the State of Illinois. Please note that if you reside outside the State of Illinois and you pick your item up locally in Illinois. Ownership
6' x 17" Carlton Radial Arm Drill Model 4A
One) Pre-Owned 6' x 17" Carlton Radial Arm Drill Model 4A Machine As Taken From Service. Videos Available Upon Request. Inv# EI3557 Specifications: Area of Base: 77" x 48" Spindle Speeds(36)12 to 1200 RPM Spindle Feeds(18) 004 to.125 IPR Taps: 8. 11 1/2, 14, 18 TPI Diameter of Spindle: 3 3/16" Taper Spindle: 5MT Spridle Travel: 18" Distance Spindle to Column: 13 1/2" to 72" Max Distance Spindle to Base: 14 1/2" to 72" Max Travel of Head on Arm: 58 3/4" Travel of Arm on Column: 37 1/2" Equipped With: Power Head Clamping Power Head Traverse Power Arm Elevation Power Arm Clamping Box Table w/Vises Coolant Condition: BMC has been advised by the previous owner and operator that machine was in very good condition when taken from service. As seen in videos. Videos available of machine under-power ... moreby request. Click here to learn more about financing for this machine. Please Note: Not all machines may qualify. MACHINE IS BEING OFFERED AT AUCTION/ AS-IS/ AS TAKEN FROM SERVICE/ $150.00 LOADING FEE) 30 DAY RETURN PRIVILEGE DOES NOT APPLY ON THIS AUCTION OFFERING. Preliminary specifications subject to verification and should be used as a guide only. BMC makes no guarantees in the accuracy of specifications and/or condition. BMC can assist buyer in securing competitive freight quotes from our preferred freight providers for shipping and assist in scheduling a pick-up and delivery to buyers facility. Please note that delivery constitutes delivery only. Buyer will be responsible for unloading machine(s) Delivery may take up to two-weeks depending on freight provider schedule. All payments are to be made in full within 5 days of auction end. Machinery will not be shipped until payments for machine(s) and any freight charges are paid in full. BMC is not responsible for any damage to machine after being loaded onto truck. It is the responsibility of, buyer, freight company provider and driver to insure that machine is fastened, secured and tarped after loading. All Pick-Up
mori speed Morris Radial arm Drill Press will need some cleaning
MOrris or Mori Speed Radial arm Drill press Well this drill Press we purchased for a customer and it has been sitting ever since. We are planning on pulling it out and cleaning it up however this is as far as we got with it. it does need the lifting screw put back in. This machine is a very heavy machine it has a#6 morse taper and an 11 inch column. Thank you for your Business! God Bless!
The Original Saw 16" Radial Arm Saw Type 8 - Model 3571
Greetings from West Oakland's friendliest metal recycling center! We've just upgraded our equipment and are looking for a new home for this little guy. Here's the basics: The Super Duty Series is the ultimate workhorse of the industry. Capable of operating 2 to 3 shifts per day,and able to do a wide variety of cutoff and dado operations. These massive 850-pound machines are constructed of cast and ductile iron for vibration free operation. This unit is capable of cutting off 7” thick material in a single pass. The entire Super Duty Series is better than ever with its improved finish, more durable powder coated castings and heavy steel frame. This machine coupled with our power carriage feed accessories make the machine a semi-automatic platform capable of a wide variety of production cutoff and dado operations. Series Specific ... moreHighlights 7.5 hp 3 phase motors on the 16" Automatic blade braking system Carriage return spring Adjustable cross cut stop Standard lower elevation on front of frame 24" crosscut on Medium arm machines(cat# 3551. 3571, 3553, 3554) Base column lock on all Super Duty models Precision carriage riding on 8 wide contact double row ball bearings. Providing a very smooth vibrations free travel. Oversized MDF table top Powder coated heavy gage steel frame and legs Standard work table height 33" Approximate weight 750 lbs
Original Saw Co. 20" Radial Arm Saw
3 phase with electric brake. I will deliver within 150 miles of Birmingham. AL for $150. Otherwise, you must pick up and load. I will NOT ship. 205) 261-8521 if you have any questions.
DEWALT GE634 RADIAL ARM SAW 16" 5 HP 3 PHASE 230V 1" ARBOR
This is a used HEAVY DUTY DEWALT GE634 RADIAL ARM SAW 16" 5 HP 3 PHASE 230V 1"ARBOR Motor powers up fine. Runs smooth there is no electrical boxes present on this unit, comes as shown on the pictures Packing or crating will incur additional charges. Please send me a message for quotes if interested in this machine. This item can be picked up in Upland CA or shipped by freight company. Buyer responsible for shipping and handling cost. Send a message to get a shipping quote. Posted with jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e3e404351-0xff-
WADKIN 14" RADIAL ARM SAW 220 V 3 PH
Discription: Capacity max. diameter blade 14" Motor hp 3. Manufacturer: Model: DM200 Serial# 11028 Condition: Very Good Shipping Footprint: 120(length) x 27(width) Weight: 1050 lbs.
part of a dewalt radial arm saw in aurora colorado buyer to arrange shipping
Auction Consisting Of: 1- part of a dewalt radial arm saw weights around 95 lbs Those ppl that run those parcel carrier outfits ups and fedex like to screw people out of as much money as they can. I entered into the eBay shipping calculator what I estimate this will cost to ship. Since I don't want to be screwed out of as money as those previously mentioned can The high bidder will be person that pays for shipping on their shipping account and will send me a shipping label either by mail or email. local pickup is available by appointment at no cost. It sometimes take me up to ten(10) days to ship items if you are in a hurry to get your item move along to the next auction. Ebay nor anyone else will ever tell me what types of payments I will accept so if you want to pay with some sort of paper payment feel free. Just send me a message asking ... morefor my mailing address. Will only ship to U.S. addresses. Foreign bidders will be approved to bid only after providing a U.S. shipping address. this has been outside for many years so if there is anything that can go bad by sitting outside then that part is bad. Since ebay is forcing a limited number of condition selections you the auction browser, bidder or buyer will have to learn to ignore that condition selection whatever it may be as there is no unknown Age, history and operating condition choice. Items may have some scratches. Image is Actual. Click Image for LARGER Version
DEWALT 10" MODEL 1400 RADIAL ARM SAW ACCESSORIES
Selling original Dewalt accessories from my 10" model 1400 radial arm saw. Selling this one as a package so it goes with the guard. Email if you have any questions.
Dewalt MBF MBC Radial Arm Saw: Elevation Crank Handle
Dewalt MBF& MBC Elevation Crank We have several of these Dewalt 9" Radial Arm Saws(MBF/MBC) that we have parted out. Contact us if you have other part inquiries. We have arms with clean ways. Yokes, handles, rip loc k. Rip scales, columns. Bases, column caps, elevation crank assemblies. Angle lock handles, bevel lock handles. Motor caps, motor relays, king bolt. Carriage. Etc. etc. etc. This is a Elevation Crank for a MBF/MBC Dewalt Radial Arm Saw. Picture is of actual item. Terms& Conditions: US bidders only! All auction sales are final. Accepted payments include PayPal(WE WILL SHIP TO CONFIRMED ADDRESSES ONLY) Item shipped within 2-3 business days of funds being received. S/H is FREE to all 50 states. Shipping costs are reflective of fast and prompt shipping via USPS or FedEx. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e3e404348-0xfc-
IMPERIAL RADIAL ARM DRILL 8'' X 3'
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 03130810020 Manufacturer: IMPERIAL Description: IMPERIAL RADIAL ARM DRILL 8' X 3' Capacity: 8' X 3' Model Number: Serial Number: Additional Information: 18' X 22' TABLE BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCL
Dewalt MBF MBC Radial Arm Saw: Elevating Screw with Elevating Nut Assembly
Dewalt MBF& MBC Elevating Screw with Elevating Nut Assembly We have several of these Dewalt 9" Radial Arm Saws(MBF/MBC) that we have parted out. Contact us if you have other part inquiries. We have arms with clean ways. Yokes, handles, rip loc k. Rip scales, columns. Bases, column caps, elevation crank assemblies. Angle lock handles, bevel lock handles. Motor caps, motor relays, king bolt. Carriage. Etc. etc. etc. This is a Elevating Screw with Elevating Nut Assembly for a MBF/MBC Dewalt Radial Arm Saw. Picture shows 3 assemblies. This auction is for ONE elevation assemblies. Terms& Conditions: US bidders only! All auction sales are final. Accepted payments include PayPal(WE WILL SHIP TO CONFIRMED ADDRESSES ONLY) Item shipped within 2-3 business days of funds being received. S/H is $11.99 to all 50 states. Shipping costs are ... morereflective of fast and prompt shipping via USPS or FedEx.
Delta Rockwell 14" Radial Arm Saw; Model 40-C-L 3HP, 220/440 3Phase
Up for auction is a Rockwell Model 40-C-L Radial Arm Saw. The saw was running when taken out of service several months ago. The saw is missing the small gear on the hand crank that changes the cutting height. All other adjustments are working. But will need a little TLC. The unit runs on 3 phase power. It is palletized and ready to ship. We can deliver the unit free of charge in the greater Dallas, TX Metro Area. We will also gladly deliver the saw to a freight company at no charge. Local pick up is great too. Good luck and happy bidding. There is no reserve on this saw so be on top when the auction is over. Posted with
Sears Craftsman Eat My Dust Belt Buckle Radial Arm Saw
This auction is for 1 BUCKLE 2 7/8 X 2 1/4 INCH. Says CRAFTSMAN EAT MY DUST. I DO COMBINED SHIPPING. I ship internationally. Please look at my store listings for railroad photo. School yearbooks, manual farm and construction, I have a lot of farm Implement manuals keep looking for all the manuals that I have you may need.
Omga Radial Arm Saw model RN 700 FM
Omga Radial Armsaw. 220V 3PH. This came out of storage and was used in a blinds factory. It's located in Brooklyn. NY. I can not ship this item. I can help with loading. Email any questions. I have other pieces that I will be listing soon.
CRAFTSMAN 10 inch RADIAL ARM SAW w/ laser trac. 32 inch arm length
At auction: LOCAL PICK UP CRAFTSMAN 10 inch RADIAL ARM SAW w/ laser trac. 32 inch arm length Purchased new. Used very little.as a hobby more than a business. Has been stored, maintained. AS PICTURED Thank You! Email me with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e4e7379a5-0x105-
Ryobi RA-200 Radial Arm Saw 8 1/4" - Blase Guard / A 263
Hello Folks. This is a Ryobi RA-200 Blade Guard. This is a used, metal guard, no damages; Anit- kickback fingers are Not included. Sticker is torn and peeling on side, please see all pics. Thank you for shopping with us today. And please check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days, and you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Ryobi RA-200 Radial Arm Saw 8 1/4" - Raise / Lower Crank Handle / A 262
Hello Folks. This is a Ryobi RA-200 Crank Handle. Metal crank, it is used, no damages with plastic spinning handle, please see all pics. Thank you for shopping with us today. And please check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days, and you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
Ryobi RA-200 Radial Arm Saw 8 1/4" - Post Assembly / A 261
Hello Folks. This is a Ryobi RA-200 Post Assembly with Mitre Lock. It is used, no damages. There is some light rust on lower section of post, please see all pics. Thank you for shopping with us today. And please check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days, and you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
VINTAGE SEARS CRAFTSMAN 10" RADIAL ARM SAW ON / OFF SWITCH Tool Accessories
I am pleased to offer the following item: VINTAGE SEARS CRAFTSMAN 10" RADIAL ARM SAW ON/ OFF SWITCH I removed this from a 113.23100. But it will fit many di fferent models. This item is in very good condition. Please use the picture to verify that this switch will fit your saw. Used: Very Good Condition. Free US Shipping Check out my! Powered by The free listing tool. List your items fast and easy and manage your active items.
searse craftsman radial arm saw ball bearing motor
this is a good working radial arm saw with 10 inch blade all it needs is a new piece of 3/4 inch plywood bolted on top for a cutting board pay with paypal ship usa only this is a commercial heavy duty saw this could be used in a lumber yard it will cut a board up 20 inches wide
Craftsman 10" Radial Arm Saw Stand Dado Molding 8 12 tooth blades Guard NJ/PA
Up for auction is a real nice great working Craftsman 10" Radial Arm Saw plus extras. See Pics use the zoom feature. Trying to make room in my garage. Local pickup only. the item are located in Stewartsville. NJ. Exit 7 off 78 west, first exit in NJ coming from PA. Thanks for looking.
Radial arm saw Delta Industrial 7 1/2 hp 16" 3phase
Radial arm saw Delta Industrial 7 1/2 hp 16" 3phase Condition: THIS Delta Saw IS USED BUT WAS REMOVED FROM A WORKING SYSTEM. IT SHOULD BE IN WORKING ORDER. ALTHOUGH WE COULD NOT TEST IT AT OUR FACILITY TO BE CERTAIN. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS, EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
Sears Craftsman 315.220100 3 HP 10" Laser-Trac Radial Arm Saw 0428-1
Sears Craftsman 315.220100 3 HP 10" Laser-Trac Radial Arm Saw 0428-1-Used for one minor job by homeowner; extremely light use-Model No. 315.220100-Made in China Comes with: 10"x40T carbide blade mounted-2 extra 10" blades-User Manual From Manufacturer: Specifications: Rating: 13.0/6.5 Amp-Input: 120/240 Volt-Frequency: 60 Hz-No Load RPM: 3.450 RPM-Blade Arbor: 5/8" Blade Diameter: 10" Blade Bevel Angle: 0 Deg. to 90 Deg. Radial Arm Swing Range: 45 Deg. Min. Left-90 Deg. Right-Blade Height Adjustment: 5.35" Carriage Travel: 17.25" Cutting Capacity: Max. Cross Cut: 15.50" Max. Out-Rip: 25" Max. In-Rip: 16" Depth of Cut: at 90 Deg. 3" at 45 Deg. 2.25" Table Size: 40"L x 27"W x 1"H-Table Height: 36" Features: 10"x40T Carbide Blade-Gives depth accurate rips and ... morecross cuts with more surport surface than competing tools-Delta 33-400 14" Radial Arm offers extra cutting capacity with the extra-long turret arm-Laser Trac technology assists in aligning the blade to the work piece-3 HP maximum deviation Control Cut feed rate motor-Sturdy Work Surface accommodates large work pieces-Built-in accessory shaft accepts a wide variety of optional accessories-Automatic blade brake stops blade in seconds increasing work safety QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 201-497-6767 SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay t
DEWALT 16" RADIAL ARM SAW, WITH 42 TRAVEL, CONVEYOR 20158
in titles& description Name: DEWALT 16" RADIAL ARM SAW. WITH 42 TRAVEL, CONVEYOR, Ticket# 20158, Model: 3571, Manufacturer: DeWalt, Item located at: Hanover. MD, Condition: Used, Terms& Condition: As is where i, Selling Price: $1250.00 Description: Major Plant Liquidation being held in conjunction with Koster Industries and Norman Machine Tool SPECIFICATIONS: BLADE CAPACITY: 16 In ARBOR: 1 In x 3 1/8 In. BLADE TILT: UP TO 90 Degrees. BLADE SWIVEL: 360 Degrees. TRAVEL: 42 In. MOTOR: 7 1/2 HP/ 3 PHASE/ 220/440 VOLTS/ 3425 RPM. EQUIPMENT INCLUDED: FRONT MOUNTED ROTATION& ELEVATION LOCKS ON ARM. HEAD ELEVATION ON FRONT OF BASE FOR EASY ACCESS. STAND. MAGNETIC STARTER. BLADE GUARD. BLADE. INFEED& OUTFEED CONVEYOR. NOTE: PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE. LIQUIDATION PRICE: $ 1.250.00. THIS MACHINE IS BEING SOLD ... moreAT A LIQUIDATION; AS IS. WHERE IS. RIGGING IS AN ADDITIONAL CHARGE AS WELL AS SKIDDING AND OR CRATING. | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Dewalt 7740 740 Radial Arm Saw Motor 120v 2hp 12amp
800x600 Dewalt 7740 740 Radial Arm Saw Motor RATED: 2 HP. 12 amp, 120 volt(overload protected) See the pictures to view the motor- specification plate. Condition: Used. FULLY TESTED AND FULLY FUNCTIONAL. Specifications: Motor# 70589-51 Winding# 80413-51 Voltage: 120V Amps: 12A Hz: 60hz RPM: 3450- Compatibility: Dewalt 7740/740 Radial Arm Saw( May fit other DeWalt Radial Arm Saw models. But I can only guarantee fit to 7740/740 model. Feel free to ask if you have questions… Informed buyers are the best buyers. Email me anytime. And I’ll respond asap, M- F. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e5413fd88-0xfa-
DELTA 10" Radial Arm Saw No. 424-02-131-0014
This is a used DELTA 10" Radial Arm Saw No. 424-02-131-0014 missing a handle. Powers up fine! This machine can be tested prior to purchase. Packing or crating will incur additional charges. Please send me a message for quotes if interested in this machine. This item can be picked up in Upland CA or shipped by freight company. Buyer responsible for shipping and handling cost. Send a message to get a shipping quote. Comes as shown on the pictures Posted with
TOPS 5 HP Radial Arm Saw Retracto-Glide Swivel & Tilt Arm
TOPS 5 HP Aluminum Radial Arm Saw with a Retracto-Glide Swivel& Tilt Arm. It is equipped with a Push Button Start/Stop and the Base is Mounted on Legs; it also includes a Saw Guard. It would be a Tremendous Asset to any Construction Site. Building Crew, Manufacturing/Toolroom/Fabrication/Maintenance Setting, Woodworking or Machining Area, or possibly the At-Home User. This unit is in Very Good Condition Physically. PLEASE SEE PHOTOS ABOVE Call 951-361-9187 WILL SHIP WORLDWIDE CONTACT ME FOR A QUOTE TO YOUR LOCATION Buyers should verify all information! Equipment is being sold as is where is and is subject to availability. But we can provide pricing to ship anywhere in the US for an extra fee. Feel Free to call us anytime 1-951-361-9187 951-361-9187 562-295-7669(Espanol) Just ask for anyone in sales.
Cincinnati Instal/Oper/Maint/Parts Radial Drill 3' Arm 71/2" col. Inv 4210
Cincinnati Installation. Operation, Maintenance, and Parts List Manual for 3' Arm 7-1/2" Column Radial Drill: Flame-Hardened Hard Clad Column Catalog Number D-132-1(Inv.4210) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international ... moresales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Summit Radial Arm Drill
Radial Arm Drill