In 
 
Order by: 
Available to: 
Price: 
 - 
$
99.99
2d 23h 56m 11s
0 bids
$0 Shipping
Condition: Used
Location: Denver,CO,USA
$
49.99
2d 23h 54m 3s
0 bids
$0 Shipping
Condition: Used
Location: Denver,CO,USA
$
49.99
2d 23h 54m 45s
0 bids
$0 Shipping
Condition: Used
Location: Denver,CO,USA
$
263.55
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
4.2
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
25.35
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
Replacement switch plate covers for your vintage Delta UNISAW or other Delta machines. HURRY! Delta Unisaw and Rockwell Unisaw plates are almost gone. ... moreSEE BELOW This sale is for a"new" switch plate cover any one of your pieces of vintage Delta shop equipment. The original switch plate covers were made from thin aluminum and were easily dented. Dinged, damaged, or lost. We have several styles of Delta and Delta Rockwell plates available. All are newly manufactured and better than the originals. All of these plates are made of stainless steel and have been carefully and painstakingly recreated from the dimensions of the original plates and from the original artwork. The switch plate blanks were laser cut from.030" thick 304 stainless steel before being carefully deburred and brush finished. Prior to the high quality screenprinting of the artwork. Four different Delta switch plate styles are currently offered: Item A" The black Delta UNISAW plate was used on all Delta table saws up to around 1945. When the plate was changed to include the Rockwell name. Only two pieces of this plate are left. Item B" The black Rockwell/ Delta UNISAW plate was used on all Delta table saws built after Rockwell acquired the Delta company somewhere around 1946. I believe the original part number for this Unisaw plate with the now added Rockwell name is 41687. Only three pieces of this plate are left. Item C" The black Delta Mfg. plate was used on early Delta woodworrking equipment. includung the Delta shapers, until sometime in the early 1940's. I believe the Delta part number for this black plate was 41685. Item D" The red Delta Mfg. plate was introduced around the 1941-1942 timeframe to differentiate from the black switch plate of the now very poplar Delta UNISAW. I believe the Delta part number for the red plate is 41686. IF YOU ORDER. YOU MUST SPECIFY(EITHER BY ITEM# OR BY DESCRIPTION) AS TO WHICH PLATE OR PLATES YOU WISH TO RECEIVE. YOU CAN DO THIS ON YOUR PAYPAL PAYMENT FORM. WHERE IT ALLOWS
$
120.75
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
270.99
Buy It Now
$0 Shipping
Condition: New
Location: Baltimore,MD,USA
Why wait for Byrd to make one? We have them in stock and can ship within the hour! Woodworkers know that a shear cut is far better than a straight cut. ... moreYou also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple. It is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. Call Dave at 410-465-6209 for more details or to add inserts to your order! 3"D x 3"W x 1-1/4"Bore Shelix with matching rub collar oellasawandtool.com Major Diameter 3" Cutting Edge Length 3" Uses 15 x 15 x 2.5 inserts Bearing included, Wrench included Box included Bore 1-1/4" Balanced and verified Made in USA by Byrd Tool#48301202-5 5 lbs Black Oxide Finish Useful in other woodworking applications. Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you integrate this philosophy with the open box program, you get a customer for life! Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s)
$
25.35
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
1,795
Buy It Now
$130 Shipping
Condition: New
Location: Kaysville,UT,USA
$
170
Buy It Now
Free Shipping
Condition: Used
Location: DeKalb,IL,USA
$
119.25
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
76.41
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
38.19
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
115.78
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
18
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
183.44
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
75
Buy It Now
Free Shipping
Condition: Used
Location: Newburgh,NY,USA
I came across a box of metal cutters mixed in with some other tools. The seven cutters look to me as if they are designed to go on a 1/2" spindle ... moreshaper used in woodworking. They are all designed to cut different molding profiles with the exception of one that would appear to be used to bore a hole. In the box was also a 1/2 shaft(4 1/2" long) that ends with a carbide cutter. You get all 8 Pieces. Picture 2 shows three cutters: from left to right they are marked: LS-16. LS-17, and LS-18, and MADE IN USA. Picture 3 shows three cutters: from left to right they are marked: LS-19. LS-26, and no markings. The first two are also marked MADE IN USA. Picture 4- there are no markings on the two cutters.
$
75
Buy It Now
Free Shipping
Condition: Used
Location: Newburgh,NY,USA
$
75
Buy It Now
Free Shipping
Condition: Used
Location: Newburgh,NY,USA
I came across a box of metal cutters mixed in with some other tools. The seven cutters look to me as if they are designed to go on a 1/2" spindle ... moreshaper used in woodworking. They are all designed to cut different molding profiles with the exception of one that would appear to be used to bore a hole. In the box was also a 1/2 shaft(4 1/2" long) that ends with a carbide cutter. You get all 8 Pieces. Picture 2 shows three cutters: from left to right they are marked: LS-16. LS-17, and LS-18, and MADE IN USA. Picture 3 shows three cutters: from left to right they are marked: LS-19. LS-26, and no markings. The first two are also marked MADE IN USA. Picture 4- there are no markings on the two cutters.
$
950
Buy It Now
$0 Shipping
Condition: New
Location: Beaver Falls,PA,USA
ACCURA/COMATIC 03303(AF-38) 1/2 HP 220 VOLT STOCK FEEDER/POWER FEEDER This is the Stock Feeder of choice for the mid-sized to larger shop. Powered by ... morea 1/2 hp 220 volt motor. It features 4 speeds, fully adjustable support collumns and forward/reversing switch. 16" of horizontal travel and 9" vertical movement allow for handling of larger pieces. Rollers are synthetic rubber with a 50-56 durometer rating and we sell replacement rollers in another Ebay listing. This unit is manufactured by one of the largest power feeder manufacturers in the world! New in Box. Please contact us for shipping quote. Please email with any questions BEFORE you bid or order. We try to describe each item as accurately as possible. And want the bidder to be confident that the item is what they want. Our feedback record proves that We are trusted. We treat folks right. WE USUALLY SHIP WHICHEVER W AY IT WILL BE MOST AFFORDABLE TO YOU. IF YOU HAVE ANY REFERRENCE OF SHIPPING THAT DIFFERS FROM OUR METHOD. PLEASE S TATE IT IN ADVANCE. WE WILL BE HAPPY TO SHIP IT YOUR WAY. BUT Y OU MUST LET US KNOW IN ADVANCE! If you are close to Beaver Falls. A Western PA 40 miles north of Pittsburgh and close to Ohio and West Virginia) you can certainly drop by and pick up your purchase during our store hours. You are invited. Just plan on staying a while. It is a* TRUE TOOL EXPERIENCE* If you have a problem with the transaction or the item received please call us or write us before you go negative with feedback. We will work it out. Unless otherwise stated all gas powered tools and machines are sold AS-IS. If you bid and buy something that does not fit YOUR needs. But is not our fault we will have to charge a 10% restocking fee. Any returned item must be in the same condition as when you received and in salable condition. If it has been altered
$
4.2
Buy It Now
$0 Shipping
Condition: New
Location: Freeland,MI,USA
$
89.99
Buy It Now
$0 Shipping
Condition: New
Location: Baltimore,MD,USA
Huge LRH Clearance Sale Now! Call Dave at 410-465-6209 for current inventory list while supplies last! Download PDF Price List! List Price: $172 H-725C ... moreFlooring Outside Diameter- 1-5/8" Shank- 1/2" carbide tipped New in packaging balanced and verified 100% American Made 1 lb Useful in other woodworking applications. Product Guarantee LRH cutters are guaranteed against defects in workmanship. Materials, and performance provided the tool has not been incorrectly applied or misused. www.O ellaSawAndTool.com Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you integrate this philosophy with the open box program, you get a customer for life! FREE Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and want an open box, its best to email right away, eve
$
15.5
Buy It Now
$0 Shipping
Condition: New
Location: USA
THE MACHINIST'S LIBRARY THE WELDER'S LIBRARY 100 RELOADING& 1000 FIREARM MANUALS STILL PLANS. HOME DISTILLATION, ETHANOL FUEL_ Welcome to ... morea product distributed by Krypton-Hersir Gift Quality CD TO BE PLAYED ONLY ON a Windows. Mac or Linux COMPUTER or TABLET You will receive a CD- You will not receive physical books_ 60 days full refund guarantee and return shipping paid by us if you are not satisfied Try this DISC before buying an inferior work elsewhere The Library of Ornamental Turning The Master Works Published by Etelond Engineers Contents: THE MASTER WORKS ON ORNAMENTAL TURNING Turning Lathes. J. Lukin, 3rd ed. 1890 Ornamental Turning. J. H. Evans, 1903-1904 Vol I Vol II Vol III The Lathe& Its Uses. With Appendix on Eccentric Turning, etc. J. Lukin, 1898 The Practice of Hand Turning in Wood. Ivory, Shell, etc. F. Campin, 2nd ed. 1868 The Turner's Manual. L. E. Bergeron, 1877 Turning& Mechanical Manipulation. C. J.J Holtzapffel, 2nd ed. 1852-1881 Vol I Vol II Vol III Vol IV Descriptive Catalogue of the Woods for the Mechanical& Ornamental Arts. C. Holtzapffel, 1852 GEOMETRIC. CONCENTRIC, ECCENTRIC, ELLIPTIC TURNING A Brief Account of Ibbetson's Geometric Chuck. J. H. Ibbetson, illustrat. Holtzapffel, 1833 Simple Decorative Lathe Work. J. Lukin, 1905 Specimens in Eccentric Circular Turning. J. H. Ibbetson, 3rd ed. 1900 The Handbook of Turning- Concentric. Elliptic& Eccentric& Patterns, Anonymous, 1842 The Turner's Companion- Concentric. Elliptic& Eccentric Turning& Patterns, Anonymous, 1868 PATTERN MAKING A High School Course in Wood Pattern Making. J. H. Wilson, 1919 Pattern Making. J. Ritchey, 1908 Pattern Making. J. A. Shelly, 1920 Patterns for Turning. H. W. Elphinstone, 1872 The Pattern Maker's Assistant. J. Rose, 1878 Wood Pattern Making. H. T. Purfield, 1908 Pattern Making Kinks. F. H. Colvin& F. A. Stanley, 1908 WOOD TURNING COURSES& TRAI
$
236.39
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
1,295
Buy It Now
$135 Shipping
Condition: New
Location: Kaysville,UT,USA
$
150
Buy It Now
Free Shipping
Condition: Used
Location: Newburgh,NY,USA
$
261.77
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
183.44
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
34.99
Buy It Now
$0 Shipping
Condition: New
Location: Baltimore,MD,USA
Huge LRH Clearance Sale Now! Call Dave at 410-465-6209 for current inventory list while supplies last! Download PDF Price List! List Price: $100 H-748M ... moreLock Miter for 3/8" to 11/16" material Outside Diameter- 2" Shank- 1/2" carbide tipped New in packaging balanced and verified 100% American Made 1 lb Useful in other woodworking applications. Product Guarantee LRH cutters are guaranteed against defects in workmanship. Materials, and performance provided the tool has not been incorrectly applied or misused. www.O ellaSawAndTool.com Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you integrate this philosophy with the open box program, you get a customer for life! FREE Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and want an open bo
$
127.82
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
114.63
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
50.44
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
75
Buy It Now
Free Shipping
Condition: Used
Location: Newburgh,NY,USA
I came across a box of metal cutters mixed in with some other tools. The seven cutters look to me as if they are designed to go on a 1/2" spindle ... moreshaper used in woodworking. They are all designed to cut different molding profiles with the exception of one that would appear to be used to bore a hole. In the box was also a 1/2 shaft(4 1/2" long) that ends with a carbide cutter. You get all 8 Pieces. Picture 2 shows three cutters: from left to right they are marked: LS-16. LS-17, and LS-18, and MADE IN USA. Picture 3 shows three cutters: from left to right they are marked: LS-19. LS-26, and no markings. The first two are also marked MADE IN USA. Picture 4- there are no markings on the two cutters.
$
202.55
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
27.99
Buy It Now
$0 Shipping
Condition: Used
Location: Webster,NY,USA
$
34
Buy It Now
$8 Shipping
Condition: Used
Location: Saint Louis,MO,USA
$
118.23
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
6,999
Buy It Now
$300 Shipping
Condition: New
Location: Brashear,TX,USA
$
124.67
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
121.59
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
62.48
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
69.99
Buy It Now
$0 Shipping
Condition: New
Location: Ellicott City,MD,USA
Huge LRH Clearance Sale Now! Call Dave at 410-465-6209 for current inventory list while supplies last! Download PDF Price List! List Price: $285 K-1199 ... moreDetail Cutter for 3/4" stock Bore 3/4" carbide tipped New in packaging balanced and verified 100% American Made 1.5 lbs Useful in other woodworking applications. Product Guarantee LRH cutters are guaranteed against defects in workmanship. Materials, and performance provided the tool has not been incorrectly applied or misused. www.O ellaSawAndTool.com Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you integrate this philosophy with the open box program, you get a customer for life! FREE Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and want an open box, its best to email right away, even be
$
124.67
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
119.25
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
69.99
Buy It Now
$0 Shipping
Condition: New
Location: Ellicott City,MD,USA
$
226.84
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
119.25
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
103.36
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
111.3
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
217.25
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
38.19
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
262.46
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
38.19
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
62.48
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
75
Buy It Now
Free Shipping
Condition: Used
Location: Newburgh,NY,USA
$
58.77
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
127.82
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
74.1
Buy It Now
$0 Shipping
Condition: New
Location: Cedarhurst,NY,USA
$
35
Buy It Now
$0 Shipping
Condition: Used
Location: Augusta,ME,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
For auction is this large lot of vintage shaper knives. 1/2' spindle holes, most will need a little dressing before use. The shaper tools have been stored in a craftsman table shaper cabinet for a long time and have not been used in years, all look to be in good condition.
Vitor Sabadell 3 phase motor 3400 rpm 277/480volt has extended shaft for cutters off of working high production moulder Model ALF90- cutter area 6 1/2" long shaft from motor length is 9" I don't have any more info on it. No liability expressed or implied on installation or suitability for a particular use. See my feedback. And bid with confidence. Winning bidder must reply within 3 days of final bid and payment received with 7 days of final bid. TERMS: ALL non-paying bidders will be filed with ebay. All items sold as is-please see pics and ask questions, SHIPPING: Ship UPS Ground We no longer accept INTERNATIONAL bids. Please email ahead of time, if you wish to have it dropshipped to a US address, please don't bid unless you can make these arrangements. FOB point of origin, If you do not accept the above shipping terms. ... morePlease do not bid.
see more photos online here We enjoy visitors by appointment. COME SEE THIS IN NORTHERN il ZIP 60115! We have been buying and selling used woodworking machinery for 40 years. MORE PHOTOS AT THIS LINK. SCMI made these for compact shapers for Rockwell. Model T100 with 1.25 inch single spindle. Heavy cast iron fence. Approximate 5hp 230volt 3phase motor, includes reversing switch and speed switch. Bearings seem fine, no electrical issues, no vibration when we ran it. You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as machinery rebuilders and dealers. To help you choose the right woodworking equipment for your shop. Pleasant St Woodworking Machinery has been serving skilled craftsmen, world-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt ... morewoodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You! Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.00% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on all items. An additional $25/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. ALL
CMS 4027 Shaper Manufacturer: SCMI Model: T130 Programmable YMFG: 2003 Condition: As Taken From Service Location: Southwest USA Price: $12.000 1-1/4" spindle Programmable Controller for fence. Spindle and table Aluminum fence contact: Chris Deal 704-288-1904 x 108 link to machine: http:www.carolinamachinerysales.com/page=detail&id=used&machine=4027&input=Go
RBI INDUSTRIES ROUTER TABLE M/N 1830 UNIT WAS REMOVED FROM A WORKING ENVIROMENT. FULL CAPABILITIES OF MACHINE HAVE NOT BEEN FULLY TESTED SO AS ALL OF OUR AUCTIONS ITEM IS BEING SOLD AS IS AND ALL SALES ARE FINAL. UNIT CAN BE UNASSEMBLED AND SHIPPED UPS OR LOCAL PICK UP IS AVAILABLE. JUST GOT A TRUCK LOAD OF DELTA WOODWORKING EQUIPMENT SO BE SURE TO CHECK OUT OUR OTHER ITEMS. Check out my other items!
one) Vertical spindle shaper. Whitney model 589, 5hp, 220/440 vac, 3500 rpm motor. We believe the spindle speed is approx. 8000 rpm. Approx. 4 ½" spindle space under nut. 1" diameter spindle. We also have a ¾" diameter spindle. Approx. 100) milling cutters, 7) adjustable cutter heads that accept steel tool inserts. 30) Pairs of inserts that are included. 30) Spacers. With disconnect switch, motor starter, and pushbutton starter, 7) shop made fence guards. We will palletize and load for free. No handling charge if you pick up or make your own shipping arrangements, otherwise shipping is $1175.00 in the continental US. You can email text messages to my phone at 9374165497@vtext.com D-5101, 102, 103, 105, 106, 107-114 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image ... moreAlbum Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $1175.00 tru International Shipping. $2000.00 s FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
This it a good condition. Used carbide cutter for a shaper with a 1 1/4 inch spindle. All of the knives edges are in good shape. It could possibly be made by LRH but that is unknown. Knives are 1-1/4 in long, and start cutting at 3/8" and taper up to 1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any ... moreitem requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities
I think this is a Baldor shaper but not positive but motor is a Baldor 220 1 phase 1.5 hp or can run on 110 volt. Runs perfect electric brake works great see video.Big table has cutters on it now but sold seperate blades just for video.Cradle in pic's is sold seperate Great for making doors and mouldings and trim.Have a lot tool from dads old shop for sale take a look thanks Local pick up but will ship freight but buyer pays freight
aims SMITHWAY 3.5" WOODWORKING SPINDLE SHAPER- XL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Smithway Machine Co. This is a Woodworking Spindle Shaper in working condition. Model# XL Specifications: Spindle: Cutting Diameter: 3.5" Travel: 3" Arbor: 1" Table: Table Size: 42" x 22" Height From Floor: 38" General: Motor(believed to be) 3 Horsepower Electrical: 220/440 Volt. Three Phase Overall Dimensions: ... more37" x 42" x 50" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SMITHWAY 3.5" WOODWORKING SPINDLE SHAPER- XL SMITHWAY 3.5" WOODWORKING SPINDLE SHAPER- XL SMITHWAY 3.5" WOODWORKING SPINDLE SHAPER- XL SMITHWAY 3.5" WOODWORKING SPINDLE SHAPER- XL SMITHWAY 3.5" WOODWORKING SPINDLE SHAPER- XL SMITHWAY 3.5" WOODWORKING SPINDLE SHAPER- XL Reliable Tool Inc. c 2011 | Powered by
This is an assemblage of 12 molder or shaper blades for crafting profiles into molding. They are used- but generally in good shape. Some are sharp- some need a little work. This is a nice little assemblage of sharps for making stuff. The smaller ones have a 17/32 arbor and the large shaper is 1 1/16" Happy cutting. We ship within 1-2 days of purchase. Thank You 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e9e7e2785-0x103-
VOORWOOD L110 EDGE SHAPER. SANDER& FOILER/ WOODWORKING Click Images to Enlarge ​VOORWOOD L110 EDGE SHAPER. SANDER& FOILER/ WOODWORKING COMES AS SEEN IN PHOTOS ALL THE INFORMATION THAT WE HAVE IS STATED BELOW OR CAN BE SEEN IN THE PHOTOS. MADE BY VOORWOOD MODEL L110 SHOP NO. 6108 THREE PHASE Hz 60 AMPS 25 VAC 220 VOORWOOD MOTORS(1) 5HP 60Hz 230/460 RPM 3450 THREE PHASE 12.8/6.4 AMPS(1) 1 HP 230/460 3.0-1.5 AMPS 1725/1425 RPM CONTROLS REWIND TORQUE TEMP CONTROL SERIES 807 REWIND SHAPE FEED JOG HEAT SAND FEED FILM JOG WEIGHT 1100 LBS OVERALL SIZE 72"x42"x53" $30.00 LOADING FEE. $50.00 FOR PALLET. WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST. NO PAYPAL FOR ITEMS BEING WILL CALLED Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: ... moreDomestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Pre
Excellent Master Carpenter/ Furniture Maker Estate Collection or Lot of roughly 28 shaper cutter or moulding heads. Boxed shaper collars, boxed specialty drill bits, boxed collet chuck(missing one of the jaws) and so much more, most in near absolutely mint condition, just needing a good cleaning or oiling This fantastic and huge woodworking tool set was formerly the proud possession of a local master carpenter. Who throughout his life was quite well known for many things, including more recently being one of the leading finish carpenters for the esteemed Eldred Wheeler Company, and was truly a pioneer in his work in tiger oak, maple, and burled walnut too. This set also includes a few that are carbide tipped and would honestly cost you a small fortune to replace retail today, likely well over $1000 or more. Everything pictured is included ... moreand free insured shipping in the U.S.A. is included as well! Less than $10 each for the shaper cutter heads to your door, and everything else is included too! Please check the pictures very carefully for exactly what's included. And for their exact age and condition, they're nice! Thank you for looking and Insured Priority Mail Shipping is Free in the U.S.A. Just listed and now with a lower price! This collection of top of the line carpentry tools will simply not last at this price. Make them yours!
Moak No. 7 single spindle shaper. Ser. No. 5852 Year. About 1962 1" spindle Length of spindle above table 4-1/2" Vertical adjustment on spindle 3-1/2" Table size 22"x42" Spindle speed 8350 rpm 2 hp. 3Phase, 220/440 volt, Currenty wired for 220volt. 700lbs I removed the old paint with a needle scaler. Primed and repainted. The top was surface ground by Simcox Grinding in Brimfield.Ohio The motor was cleaned. Baked out, checked and new bearings installed by Hunnel Electric Motor repair in Akron, Ohio The spindle was disassembled. Bearings washed out,inspected and reassembled by Hunnel Electric as well. The drive belt was replaced while the spindle was disassembled. It is a"Panther" flat belt from Musson Rubber in Akron. Ohio. I started this project several years ago. I then acquired another Moak No. 7 with ... morethe larger top in mint condition. I was able to put that one right into service. These Moaks are rock solid. I was really surprised at the performance compared to my Powermatic or Delta shaper Buyer pays freight. Figure on 800lbs. Shipping from a business dock at Zip 44311. Akron, Ohio. Pickup is also fine. I will band securely to suitable pallet and strech film for shipping. I cannot quote shipping cost in advance of auction end. I can set up shipping and add final shipping cost to invoice. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f3c635ca3-0xfd-
UP FOR BID IS A LOBO 3 HP SHAPER. CUTTERS INCLUDED. HAS AIR CLAMP FOR COPING. GOOD WORKING ORDER. FOR LOCAL PICK-UP ONLY. ITEM IS LOCATED IN MANASQUAN. NJ AND MUST BE PAID FOR AND PICKED UP BY JUNE 30. CHECK MY OTHER AUCTIONS FOR ADDITIONAL EQUIPMENT FOR SALE!
UP FOR BID IS AN SCMI T110 SHAPER. IT IS 25 YEARS OLD BUT IS IN FINE WORKING ORDER. FOR LOCAL PICK-UP. ITEM IS LOCATED IN MANASQUAN. NJ AND MUST BE PAID FOR AND PICKED UP BY JUNE 30. CHECK OUT MY OTHER AUCTIONS FOR ADDITIONAL EQUIPMENT!
Two large boxes of shaper knives are part of the sale. One of the spindles has been removed but can be reinstalled. Prior to me purchasing this machine the 7hp. 22 amp motor had been rewound. I have put on very few hours since then. There is a new on/off magnetic switch installed to insure greater safety when using the shaper. The machine worlds great; I have not had any problems with it. Because of the weigh of this machine, 1000+ pounds, it will have to be picked up at my shop.
Please phone with questions( 815) 758- 6534 and check out other PLEASANT STREET MACHINERY woodworking machinery pictures here some Youtube machine videos we have made here. Casolin F90c shaper. Came from a small 1 man cabinet shop. Slider travels 34+ inches, internal build is very heavy. Removeable 1.25 inch spindle. Wired 230volt 3phase. Appears nearly new. 4 speed. Heavy dust port with micro-offset infeed fence. Outstanding european quality that is in very good running condition. LTL box truck freight should be about $225-$375 to a US business dock. more photos online here: We run your machines and go through all operation and sand wood. Call(815)758-6534 to request a video. Shipping weight approx. 2300 lbs. Phone with your zip for a quick freight quote at our discounted rate structure. Pleasant St Woodworking Machinery has been rebuilding ... moreequipment for 20 years and working with wood for 40 years. Our customers are industrial manufacturers. Skilled craftsmen, and high end hobbyists looking for the right machine for the job. Our 20,000 square foot warehouse and full metalworking shop is located in DeKalb, Illinois. We completely go through, run, and test the used machines we sell. 815)758-6534. please call( 815) 758-6534 because we like questions and can show you over 200 other woodworking machines that we own in our workshop. We will help find reasonably priced freight-SEE below or ASK SELLER QUESTION with your zip code and residence?yes/no or loading dock or forklift. Shipped F.O.B. from 60115. WE LIKE LOCAL pickup too! to see this powered up or request a video; send us a note to pleasantstmachinery a t gmail dot com. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized in rebuilding American machines that are ready to work and do what you want them to do. Our inventory is constantly changing. We get most machines from our client. send us an email. Thank You! Payment All auction payments must be received within 7 days of the close of the auction. After t
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! FOR ALL QUESTIONS PLEASE CONTACT US WITH ANY QUESTIONS 925-872-0929 OFFICE CSWAFFORD925@GMAIL.COM THIS MACHINE IS LOCATED IN OUR FACILITY AND HAS PASSED AN ALL POINTS INSPECTION AND READY TO SHIP! Used SAC Model#TS-90 Heavy Duty Shaper. 230 volt, 3-phase machine, 1986 Year Built machine in Good running order, Large Table, Nice Older Italian Built Shaper, Make Offer! Rating: Good Contact Information: 925-872-0929 Cswafford925@gmail.com Financing Available Payment Methods: Visa. Mastercard, Amex, Check, Cash Location: California Please contact for Terms and Condition We offer no warranties on the sale of used equipment. However. We do guarantee that the machine will be in good working condition upon delivery to your facility. We will ship Via Air Ride Flat Bed. Across the entire ... moreUnited States, and Canada. International Shipping as well. Please contact us for a freight rate. Auction Bid does not include Shipping Price, or Sales Tax if Applicable. On Nov-15-09 at 10:04:49 PST. Seller added the following information: On Aug-03-10 at 12:47:12 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio!
Automatic Woodworking Shaper Model# WA50 was made by Onsrund Machine Works. Inc. Chicago, IL The machine is 8' wide x 70" high x 44" deep and has cutter and feeder buttons. It has a GE Motor. Model# 5K224D39, Serial# 2768 The motor has 550 Volts. Type K, Code K, 60 Cycles, Frame 224 Additional motor made by the Louis Allis Co. in Milwaukee. WI Type OX. Frame 2554, Class F, Form B, Code G7 10 HP. 3520 RPM's, 550 Volts, 3 Phases, 60 Cycles, 11 Amps, Full Load Temp. Rise: 40 degrees C. Time Hours: Continuous. No. 409881 Call us at 845-626-3761 or contact us via ebay if you are interested. If you don’t see what you are looking for. Call us at 845-626-3761 or email us at to see what we have in stock. We list items that are cleaned and tested on Ebay. Unless otherwise specified, but you never know what we have in our warehouse! ... moreGuarantee Everything is sold as-is. By placing a bid on or by purchasing this item you have read and understand that this auction or purchase is an as-is auction or purchase. If you want to send someone to look at the equipment at your own expense you are welcome to do so. Please let us know if you are coming by so that we can have the unit(s) that you are interested in ready for you to look at. All sales are final. Shipping Please contact us for a shipping quote at 845-626-3761 or email us at. We will need your zip code(if the address is residential. Please let us know) Also, if you need a lift gate to lower the unit off the delivery truck, please let us know. IMPORTANT! Please inspect your unit(s) immediately and BEFORE the carrier departs. Immediately report any damage or missing parts to Hudson Wholesalers at 845-626-3761. Note damages on the Bill of Lading. Damages that do not appear on the Bill of Lading or that are reported after the shipper departs are not the responsibility of the carrier. Shipper or the seller. If damages occur. We will do our best to help you recover the cost of damages with the freight company. You may also pick your item up at our 40.000 sq. ft. wa
Big D Guitars Jet JWS-18HO Shaper Auction: Getting ready to make a long distance move and thinning out the machines that I don't use all that much. Have had it for the past 5 years and this was used to make les paul necks with all the jigs that I have. This is a Made in Taiwan vs. china. Its a much better machine than the china stuff. I have the manual somewhere in the house have to dig it out. I just cleaned the top and rewaxed it so its all smooth and ready to go. 1HP Machine. With forward and reverse, multiple attachments please take a look at all the pics. Machine has been in my basement and I will move it up to the garage. No issues with the machine works fine you will be able to test before you walk out. Local pickup. And cash transaction only. I am in naperville close to washington and 75th.
3hp 230v Jet Shaper. Works fine with roller base. This is up for local pickup. I could strap it to a pallet and deliver it to a local trucking company in Columbia MO for an extra $50 if the buyer makes shipping arrangements. Posted with
This auction is for a JET JWS-18O WOOD SHAPER I bought it new for my stereo shop years ago and has been used very little. Works great. Got one bit for it and manual. Thanks for Looking Features: 1 hp. 1 phase motor 115/230v• Overall dimensions 18-1/2 inch x 22-3/8 inch x 40 inch• Open steel stand• 4 inch dust chute• Independent left and right fences From the Manufacturer: 1 hp motor delivers plenty of power for even the toughest shaping jobs. Heavy. Rigid cast-iron table creates a large working surface. Open style stand provides stable work station. Left and right fences are independent and feature micro adjustments. Standard equipment includes 1/2-inch and 3/4-inch interchangeable spindles, 1/2-inch and 1/4-inch router bit collets. Technical data: Horsepower: 1 hp Amps: 11 Watts out: 1.050 Volts: 115/230 AC Phase: Single Spindle diameter: ... more1/2 in. and 3/4 in. Spindle travel: 1-7/16 in. Spindle speed: 7.000 and 9,000 rpm Table size: 18-1/4 in. by 22-1/4 in. Table height: 35-1/2 in. Table construction: Cast iron Insert opening diameters: 5-1/4. 3-1/4, and 1-5/8 in. Dust port diameter: 4 in. Fence size: 23 in. by 3 in. Fence construction: Cast iron/wood Drive type: Belt Switch type: Push button Cord type: 3-prong. Rubber Cord length: 6 ft. Country of manufacture: Taiwan Grade: Professional Also included: 1/2 in. router collets. Hold-downs Variable speed: Yes Spindle brake: No Dust collection capable: Yes Cutterhead guide: Yes Reversing spindle travel: Yes Double-ended spindle: No Ball bearing construction: Yes Blade guard included: Yes Accepts 1/4 and 1/2 in. bits: Yes Miter gauge included: Yes Other features: N/A Depth: 23 in. Width: 24 in. Height: 38 in. Tool weight: 170 lbs. Shipping weight: 190 lbs. Product: 2 years Service: 2 years Customer Reviews: Not too small after all. June 29, 2002 Reviewer: veyda from Hollister. CA USA I originally wanted to buy a larger machine. But the 1.5 HP Jet was not available- so I opted for the 18HO(same spindle and travel spec.s) and hoped it could get the job done. Wa
This is from when i still had a shaper.This are lighly used cutters that i believe is the set i used to made raised panel doors and rails and stiles.nice wooden box Canadians please wait for invoice with gst tax included.GST charged to canadians and will be added to shipping portion of invoice.Gst# 10995 4222 rt0001,USA SHIPPING has to clear customs so allow 10-14 days min. after receipt of payment,i mail within 48 hours of payment(exc. weekends)overseas shipping allow 6-8 weeks surface,you can see by feedback i am trust worthy,americans i can take international m.o.please do not try to negotiate a different shipping rate after the auction.
This is a Good used blade. But probably will need to be sharpened before use. The actual diameter is 6.043" The main steel body thickness is 1-1/2" each blade is 3/8" thick We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international ... moreshipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395
Industrial Woodworking Shaper Category: Shaper- Single Double Brand/Model: Griggio- T2000 Machine Type: Single Spindle Year of Manufacturing: 1986 Condition: Excellent Condition Elect.Voltage 8.85 HP. 220, 3 Phase Literature: Manual is Available Description: 8.85 Horsepower motor 1" spindle 6" spindle clamping length under the nut with" of spindle travel 5 speeds: 2.900- 4,500- 6,000- 8,000- 10,000 4 rings Micro adjustable fence Reversible Self braking A comparable new shaper sells for over $7.000. Shipping: I will ship anywhere in the USA at the buyer's cost. The weight of the unit is around 1.600 pounds. It must go by a common carrier, LTL, FOB South Bend, IN. If you live in the South Bend. IN area and want to set up a local pickup of the shaper please contact me. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-140a6041131-0xf1-
aims ITALIAN MADE! SAC#TS.90 HEAVY DUTY WOODWORKING SHAPER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Italy by SAC. This is a used Heavy Duty Woodworking Shaper in GREAT condition. Model# TS.90 Serial# 8712 Specifications: Table Dimensions: 43-1/2" x 35-1/2" Table Height From Floor: 34-1/2" Spindle Size: 1-1/4" interchangable) Speeds(5) 2.900- 4,400- 6,000- 7,800- 10,000 rpm. Maximum Opening in Table: 10" Electrical: 220 Volt. Three Phase, 60 Hz. Overall Dimensions: 50" x 43" x 45" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for ... moremore Great Deals! Bidding starts at a dollar with no reserve. ITALIAN MADE! SAC#TS.90 HEAVY DUTY WOODWORKING SHAPER ITALIAN MADE! SAC#TS.90 HEAVY DUTY WOODWORKING SHAPER ITALIAN MADE! SAC#TS.90 HEAVY DUTY WOODWORKING SHAPER ITALIAN MADE! SAC#TS.90 HEAVY DUTY WOODWORKING SHAPER ITALIAN MADE! SAC#TS.90 HEAVY DUTY WOODWORKING SHAPER ITALIAN MADE! SAC#TS.90 HEAVY DUTY WOODWORKING SHAPER Reliable Tool Inc. c 2011 | Powered by
aims ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Italy by Sueri Alfredo. This is a Woodworking Spindle Shaper in GREAT condition. Model# TS.70 Serial# 84A42 Specifications: Spindle: Cutting Diameter: 6" Travel: 3" Arbor: 1" Table: Table Size: 31-3/4" x 27" Height From Floor: 33-1/2" General: Motor: 3.5/4.5 Horsepower. 230 Volt, 1,700/3,300 rpm, 13.7/16.9 Amp, 60 Hz, Three Phase Electrical: 230 Volt. Three Phase Overall Dimensions: 36-1/2" x 28" x 41" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category ... moreby visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 ITALY! SAC 6" WOODWORKING SPINDLE SHAPER- TS.70 Reliable Tool Inc. c 2011 | Powered by
aims ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Rockwell-Invicta. This is a used Heavy Duty Woodworking Shaper in GREAT condition. Model# RS-15 Serial# 626 Specifications: Table Dimensions: 43" x 36" Table Height From Floor: 33-3/4" Spindle Size: 1-1/4" interchangable) Speeds(5) 2.800- 4,500- 6,000- 8,000- 10,000 rpm. Opening in Table: 6" Electrical: 115/ 230 Volt. Three Phase, 60 Hz(currently wired for 230 Volt) Overall Dimensions: 47" x 48" x 45" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting ... moreour page for more Great Deals! Bidding starts at a dollar with no reserve. ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER ROCKWELL-INVICTA#RS-15 HEAVY DUTY WOODWORKING SHAPER Reliable Tool Inc. c 2011 | Powered by
aims L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by L.A Weaver. This is a Panel Raising Woodworking Shaper in GREAT condition. Model# 1536 Serial# 942780 Over the years Weaver's has specialized in the design. Manufacture and sales of wood shaping products with an emphasis on crown raised panel cabinet and house door systems. Our equipment is in hundreds of large and small cabinet shops, door companies and millwork plants whose production output ranges from 50 doors in a month to 300 doors per day. Specifications: Table Dimensions: 20" x 28" Table Height From Floor: 33" Spindle Size: 1-1/4" Opening in Table: 5" Horse Power: 5. Electrical: 230/460 Volt. Three Phase, 60 Hz Overall Dimensions: 28" x ... more20" x 35" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER L.A WEAVER#1536 PANEL RAISING WOODWORKING SHAPER Reliable Tool Inc. c 2011 | Powered by
=================================================================== The MAKE OFFER option in THIS sale(little or NO WAIT time- 24 HOURS a DAY) I know that with many eBay auctions/sales. When you use the MAKE OFFER option- you sometimes have to wait 2 DAYS to see if your offer is accepted or rejected and t his keeps you from moving on the other opportunities. NOT SO WITH THIS AUCTION! If you make an offer of a lower price(and you type nothing into"Message to Seller: Add Your Note" area on the MAKE OFFER page) your offer will be accepted or rejected within 10 MINUTES or SOONER that applies 24 HOURS A DAY. So. You can make an offer and know RIGHT AWAY if your offer is accepted or not- BUT. Remember- You can make a MAXIMUM of 3 offers on THIS or any eBay item. Then eBay stops you from making any more offers on that i tem. So MAKE YOUR ... moreOFFER COUNT! If your offer IS ACCEPTED you must make payment with i n 24 HOURS. ============================================================= Y ou're bidding on: RELIANT HEAVY DUTY WOOD SHAPER SPINDLE DD34 w/FENCE + DUST COLLECTOR HOUSING WOODWORKING- Can be run on 110 VAC or 220 VAC(currently set up for 110 V) EXCELLENT CONDITION- This professional machine was LIGHTLY used in a home shop. It's see n VERY little use. It's in dang near new condition other than M INOR oxi dation and staining on the surface(see pics) It comes with the fence and dust collector housing. Y es. ALL these are pictures of the actual unit you'll receive. BA SIC SPECIFICATIONS: Can be run on 110 VAC or 220 VAC- C o mes with 1/2" Spindle(3/4" spindle available) 1 1/2 HP motor NEED TO ASK A QUESTION? You can contact me by clicking the"Ask a Questions" link. Just down the page- just below the end of the description section SHIPPING: Buyer pays actual shipping. Plus $ 9 7.00 for a custom made. Full 6 sided wood shipping crate(to ensure that arrives in the same wonderful condition it leaves here in) Please contact us for a shipping quote before bidding. We ship only to P
spindle tilting-5 to 45 deg.vertical spindle adjusting 170 mm.5 speed,motor power 6,6kw,230v 3phase,sliding table,1'1/4 spindle SECURED WARRANTY!SECURED WARRANTY! SECURED WARRANTY! ONE YEAR. YOU PAY 80%NOW AND 20% AFTER 1YEAR.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141448a8e33-0x105-
Description Item: Nice Shaper Bit Cutter Condition: This great Shaper bit is in good condition. Shows signs of light use. But appears to be in good condition. Very solid, strong, and sharp. Overall a great attachment for your machine, will definitely get the job done. View pictures for greater detail. Size: 1 1/4" center 3 1/2" accross 3 1/4" tall Colors: N/A Comments: This item was previously owned. We are an estate liquidation company and are not experts on any one particular product. So please view photos closely for details and ask questions before purchasing. All items are sold"As-Is, Where-Is" with no warranty implied. Please refer to the terms of our return policy. Buyer pays return shipping. Thank you for looking! We stand behind each listing; our customer ratings are very important to us. We strive to do ... moreour best to ensure our customers are 100% satisfied. So please contact me if you have any questions. Concerns or problems prior to purchase or upon arrival of shipment. View My Other Items For Sale View My Feedback DZ-090913-RCK15 Payment Paypal is the only form of payment we accept. Winner is excepted to pay within 7 days or I will relist the item. Sometimes exceptions can be made but please contact me first. Buyers in California will be charged 8.00% sales tax. Shipping Items are shipped by Fedex Ground or by USPS depending on weight and size of item. We ship daily. Monday through Friday. If you pay for your item before 7:00am Pacific Time, it will ship the same day. Otherwise, it will ship the next business day. International Buyers- Please Note: We offer international shipping on everything we're able to. If an item can be shipped internationally(outside the US and Canada) there will be an advertised shipping rate included in the listing. If you do not see international shipping offered on the listing then the item is too large to ship to your country. Your customs form will include accurate information. Do not ask me to falsify the customs form. Import duties. Taxes, and
Up for sale is a HUGE LOT Wood Moulding Knives. Come from a closed down frame factory. They are all used and as you see them. 250 pounds. Maybe you can use them. See all pics and make up your mind. FREIGHT SHIPPING TO CONFIRMED CONT US BUSINESS ADDRESS WITH LOADING DOCK or FORKLIFT ONLY NO RESIDENTIAL. Any questions call 662-550-5217 or email us. Payment DUE WITHIN 48 HOURS AFTER AUCTION CLOSING. PLEASE READ: Items will be shipped within 5 days after payment has been made. Go by OUR DESCRIPTION ONLY Not Ebay's We're the ones selling it. Ebay is bidding site with a certain risk! Our Items come from Government surplus. Estate sales, Bankruptcy auctions, IRS auctions,or university surplus. You are buying as if YOU went to an auction yourself and bought it yourself. As they announce at all auctions. All items sold as is where is with ... moreno warranties expressed or implied. Ebay doesn't have a category description for untested. So if I state untested. Go by that description only. Most Items are dirty. Items will need to be cleaned. I don't clean or refurbish items. Accessories such as remote controls. Batteries, cables or paperwork may or may not be included and if it is not in the pictures or mentioned in the listing, it's just not there! A lot of items will have stickers or sticker residue on them. To take them off use some goof off or other solvent. All of our merchandise is sold As-Is. Contact me if you have any issues before leaving negative feedback. It is important that all bidders understand what they are bidding on and feel confident. Of course we can't possibly do it right for EVERYONE.we're trying really hard! So- one more time: all of Ebay auctions pose a degree of RISK for buyers and is not for every bidder. The pricing on the auction site is reflective of the risk a buyer takes and as it is in auctions: everything is sold as-is
Jesada Millennium Shaper Cutters CIT 111 MAN(3-1/2 X 31/32 X 3/4" insert cutter carrier This review covers the following 3/4" bore cutters: Made in Italy. Combination Rail and Stile(CIT-107) Door Edge(CIT-251) Double Rail and Stile(CIT-221) Multiple Profile(CIT-263) These cutters are fairly new items from Jesada(as of this writing) and utilize insert tooling. Meaning you can replace the cutting knives(or in some instances use different knife profiles with the same cutter body) For further information, please see. Please note this review was produced after approximately eight hours of"shop time" with the cutters. Summary Overall fit and finish of the tooling is superb and the resulting cuts are first-rate. I simply could not get cherry nor maple to burn. Even with a pretty good range of feed rates(I feed by hand and my ... moreshaper runs at 6000 rpm) I also felt more in control with these cutters than three-wing cutters. The resulting surfaces are downright silky. When you combine this performance with replaceable knives and the versatility of the designs, my take is that that these are outstanding products. As for permanent-knife shaper cutters(or even router bits for that matter) I've always worried about sharpening when that time comes- can you find a reliable service or reliably do it yourself? In this respect I really feel like the Millennium shaper cutters are"lifetime" tools- replace the knives and off you go. I am a huge fan of this type of setup(which is one of the main reasons I installed the Esta disposable blades in my jointer/planer last year) The only issues I ran into were very minor. And fell into two categories: Use on the Robland X31 Shaper: First. My Robland X31 shaper has a staggered spindle(it has a 1.25" section and a 3/4" section) I did not think to actually measure my 3/4" spindle length before contemplating the 3/4" spindle cutters. That may have been stupid on my part, but it's something I could have easily overlooked- some of these cutte
Click to Enlarge Click to Enlarge Click to Enlarge This is an original vintage manual on woodworking machinery published by the Walker-Turner Company of Plainfield. New Jersey with a 1934 copyright date. This manual is 76 pages including the end papers plus the covers measuring about 6" x 9" The front cover is titled The Bench Saw. Jointer and Spindle Shaper- Their Use And Application. The title page reads: A Comprehensive Handbook on Uses adn Applications of the Bench Saw Jointer and Shaper containing over 100 photographic illustrations and line drawings- Copyright 1934. The Walker-Turner Co. Inc. Plainfield, New Jersey The page opposite the title page indicates"Second Printing October 1934" This manual is illustrated throughout with numerous photos and drawings and is divided into three sections covering The Bench Saw. ... moreThe Jointer and The Vertical Spindle Shaper. This is an original vintage manual published almost 80 years ago which I presume probably came with the purchase of one of these Walker Turner woodworking machines in the 1930s. This manual has some toning to the end papers and some modest wear but is clean. Fully complete and intact and in good shape overall. Email any questions. Thanks for looking, Payment Terms Winning bidders will receive an email at the end of the auction explaining the option for paying with Paypal. If you have questions about how to pay for this item please let me know. If you made multiple purchases for a single shipment contact us for combined shipping charges which will normally be less than the amount shown on Paypal invoice. You will receive an email notifying you when your item ships. Buyers outside the USA. Please provide a telephone number for customs forms. Shipping Terms Please click on the Shipping& Payment tab above to access the eBay shipping calculator which will give you the options and costs for shipping your item depending on your zip code or country. Our shipping charges are based on actual postage cost plus less than one dollar to cover
Date of Manufacture: June 200Machine Specs: Volts 230. AMPS 18, Motor HP 7.5, Phase 3.nbsp One Unit comes with a 2007 Maggi Auto Feed Unit, Model 2044 Type 13601515
Up for sale is a Grizzly three headed shaper I purchased it new about 4 yrs ago. condition is about a 7 only because one of the spindles has a wable to it could be a simple fix haven't had time to even look at it. It come with everything that came with it 1/2 spindles I also spent 1000.00 on the 1 1/4 spindles that come with it. fences and any spacers come too. This unit is 220. The board feeder is included I paid. 6000.00 shaper. 1000.00 1 1/4 spindles. 1100.00 power feed. 8000k total Please make offer need to move to up grade. I can pack it and ship Customer pays for all freight and 100.00 for crating Local Pickup Free. Geoff 813 240 9897.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141c542d642-0x10a-
aims TENSILKUT HEAVY DUTY WOODWORKING SHAPER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by TensilKut. This is a Heavy Duty Wood Working Shaper in good condition. Specifications: Collet Capacity: 5/8" Free Speed: 18.000. Motor: 115V. AC-DC, 8A, SIngle Phase. Overall Dimensions: 18" x 14" x 12" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TENSILKUT HEAVY DUTY WOODWORKING SHAPER TENSILKUT HEAVY DUTY WOODWORKING SHAPER TENSILKUT HEAVY DUTY WOODWORKING SHAPER TENSILKUT ... moreHEAVY DUTY WOODWORKING SHAPER Reliable Tool Inc. c 2011 | Powered by
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES Rockwell 2-Speed Heavy Duty Shaper Model No: Not Available Year: Not Available Condition: Great Rating: 3) Used/Tested Apx. Replacement Cost: $ NOT AVAILABLE Technical Specifications: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ... moreNormal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false fal
BUYER MUST EMAIL PRIOR TO PURCHASE FOR ACCURATE FREIGHT& CRATE CHARGES Lobo Heavy Duty Shaper Model: SP-202T Year: 2007 Condition: Excellent Rating: 3) Used/Tested Replacement Cost: $ 2.690.00 Technical Specifications: 5HP. 220V, 60CY, 3PH Table Dims. 35.5" x 28" Spindle Speed: 3600- 10000 RPM Standard Spindle Dia. 1" 0.75" Spindle Travel: 3.5" Spindle Under Nut(1" 5" Spindle Tilt: 5 ~+ 45 Degrees Table Insert: 7" All specifications are listed to the best of our knowledge. Please email with any questions prior to purchase. Machine Ratings: 1) New Surplus: Equipment or parts are new. 2) Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, ... morethe complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was rece7ived by us as an individual part or integrated equipment that could not or was not tested. Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. Shipping: Buyer is responsible for all shipping. Crate, freight charges, and any applicable taxes. Items will be shipped within 10 business days from the date paymen
YOU ARE BIDDING ON/ BUYING A REBUILT WIENIG GRINDER SPINDLE PART/ MODEL: UNKNOWN THESE UNITS CAME FROM A SPARE PARTS ROOM OF A WOODWORKING MANUFACTURING PLANT THAT CLOSED IT'S DOORS. IT WAS REBUILT. BUT NVER PUT BACK INTO SERVICE. WE WILL GUARANTEE IT TO BE IN PERFECT WORKING CONDITION. B-367
This is used and a little dirty but does work. Some minor rust. I may have to take it apart slightly to fit it into a box and the weight is pushing 70 lbs. Shipping will be through USPS or Fed-ex.
SC MI T 130-N Heavy Duty 9HP Shaper with Power Feed General Info: Stock# CB-13100 Condition: Used. Good Tested: Yes. Good Working Condition Brand: SCMI Model: T 130 N Serial: AB.72027 Year: N/A Shipping Weight: 1500 Lbs. Shipping Dimensions: 68" L x 42" W x 78" H Location: Stone Mountain. GA Specifications: 1-1/4" Diameter Spindle. 9HP Motor, 230V, 3Ph, 5 Spindle Speeds at 3000/ 4500/ 6000/ 7000/ 10000 RPM Speeds, 47" x 28.5" Cast Iron Table, 4" Dust Outlet, Forward/ Reverse Switch, Foot Brake, Spindle Lock, 3 Roll Samco Mini Max Power Feed, Cord& Plug. Additional Info: Shaper and Power Feed has been tested and both are in good working condition. Comes with miscellaneous accessories such as wrenches. Blade guard and other items shown in photos. Seller Contact Information: Mark Davis 404-272-1285 The ... moreEquipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14206c45586-0xf3-
DESCRIPTION: LOOKS NEW. SELLING USED, SHAPER HEAD. THE PAPER THAT WAS TAPED AROUND IT SAYS SCHMIDT LOCK EDGE SHAPER COLLAR. THE DIAMETER OF THE HEAD IS 5" DIAMETER X 1 1/2 THICK. THE BORE IS 1" THE CENTER RECESS IS 2 15/32 X 1" DEEP APPROX. THE KNIVES HAVE A 2" CUTTING EDGE. One-Shot Machine Oiler. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED ... moreIN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or ma
More woodshop machinery photos at this link: http:www.pleasantstmachinery.com/ and a few videos here too and short youtube clip of other Jointers here: https:www.youtube.com/watch?v=UxHpUNMhi-o Rare Wadkin RD 17 inch jointer. Large 4.5 inch diameter 2 knife head. Head is designed to run moulding cutters. Used as a radius moulder and arch shaper as well. Short bed does not require much floorspace: 73x30 inch. Surety cutterhead swing-away guard. 5hp 3 phase 230 volt motor. Belt drive. With our straightedge. Beds are level within 2.5 to 4 thousandths now. Sold used. Tested, ready to run and cut wood. If you want a rebuild. We will replace bearings and belts, update electricals, install new knives, and adjust the bed to level within a few thousandths(most manufacturers ship new at about 10 thou. freight should be about $325-$475 to a business ... moreaddress. $35 fee to band to standard pallet 42 inch x 96 inch wide x 40 inch tall, approx wt. 1200 lbs, SHIPPED F.O.B. from 60115, no charge to load a flatbed or your own truck with no pallet Email us your business zip and we will get a freight quote. We do not mark it up if you pay direct to freight companay(at our discounted rate! we enjoy visitors by appointment in our 20.000 sq foot workshop 60115, please phone first(815)758- 6534 More woodshop machinery photos at this link: and a few videos here too We specialize in solid wood processing machines. Share extensive rebuild knowledge, and stock 20,000 sq. foot of used machines. You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as used equipment rebuilders and dealers, to help you choose the right woodworking equipment for your shop. We have been serving skilled craftsmen, world-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt woodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized
Newman No. 351 5HP Heavy Duty Shaper General Info: Stock# CB-131028 Condition: Used. Good Tested: Yes. Good Working Condition Brand: Newman Model: 351 Serial: 9005 Year: N/A Shipping Weight: 1700 Lbs. Shipping Dimensions: 48" L x 48" W x 58" H Location: Stone Mountain. GA Specifications: 1" Spindle Arbor. 5HP Motor, 220/440V(Wired 220) 3Ph, 3" Spindle Travel, 40" x 38" Cast Iron Table Top, Forward/ Reverse Switch, Foot Brake, Cord& Plug. Additional Info: Shaper has been tested and is in good working condition. Comes with cord with female plug to hook up Power feeder to. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions ... moreor would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
CMS 4285 Pallet Nailer Manufacturer: Morgan Model: Pallet Nailer Condition: As Taken From Service Location: Northeast Price: $5.000 Minimum Pallet size: 20" x 24" Max Pallet size: 48" x 48" 3 or 4 Stringer setup Manual Pallet Flipper Produce approx 90-100 pallets per hour Price includes dismantling and loading This system does use use pneumatics to drive the nail. It is a gear operated system and requires a motor of approx 30 HP CONTACT: RALPH VIEGELMANN 704-288-1904 X 101 link to machine:
CMS 4025 Shaper Manufacturer: Unique Model: 310 Double Cope Machine YMFG: 1998 Condition: As Taken From Service Location: Southeast. USA Price: $6.500 DESCRIPTION: 2) Counter rotating 5 HP shaper spindles with 1-1/4" arbors, Sliding table with automatic lock and pleumatic clamps on each end, 24" Capaacity between the spindles, 6" Maximum material width, 1" Maximum material thickness, Machine weight- approx 1.000 lbs, This unit is from a bankrupt shop. Copes the end of two cabinet door rails each pass. Contact: Ralph Viegelmann 704-288-1904 x 101 link to machine:
SCOVILLE BROWN COOPERATIVE Where History and Creativity Meet From the late 1800's until the 1940.S the Scoville Brown Warehouse in Wellsville NY hummed with the sounds of a busy grocery wholesaler. Though the wares have changed, the sounds of a busy building remain. Also evident is the"Hearts Delight" slogan, still visible on the north side of the brick exterior. The Scoville Brown cooperative is a perfect blending of history and creativity. The artistic glow of modern light illuminates three floors of antiques. A myriad of architectural finds and local skilled artwork. If You haven't been able to find that perfect piece to make Your home complete- or to complete an era. Visit the Scoville Brown Cooperative. You're likely to find exactly what You're looking for. where history and creativity meet. Jim Braunscheidel. ... moreOwner Craftsman Forty or more cutter blades for woodworking shaper The majority are 1 1/4" with a 1" bushing for a 1" spindle The smaller measure 1/2" I have provided high resolution photos and when zoomed in will provide fine details and a sense of condition A buyer is responsible for all Taxes.Duties,Broker Fees,Insurance and Shipping Charges.
Model 43-355 1.5 HP marathon motor reversible with switch. Cast iron top 7000/10000 rpm. 4 spindles 3/4" 1/2" 1/2" stub spindle; router collet with 1/4" added magnetic starter and start/stop( not LVC) Only issue is it is missing the sheet metal converter for the dust collection for the fence and a few of the phenolic fence fingers are broken. other wise works great. Don't use it any more now that I went with new felder shaper. Buyer pays freight. I use Fed ex freight with 75% discount. Call or text question to 985 8079729.
Steel bushing set for installing a 1 1/4" cutter on a 1 inch spindle shaper. Like new condition.
Freud shaper cutter woodworking box WB101 plus extra optional OPT101 cutter(red one in pictures) Place these cutters together in different combinations to make all the cutting the profiles shown in the listing pictures. The blue diagrams that show the various cutting combinations are a part of the cutter set and they are included with this listing. The added optional red OPT101 cutter that this set includes adds an extra layer of functionality beyond the stock set. It allows the Woodworking Box cutters to be set up to the edge of the material while shaping and it also eliminates the need for jointing the stock before shaping. Please look at the listing pictures for condition. The only issue I could find with the set is a small chip in one of the corners of the N2 carbide cutter. I show that chip in the last listing picture. You can see the ... morecondition of all the other carbide cutter edges in the listing pictures as well. Freud's Woodworking Box Shaper Cutter Set includes four carbide tipped profile cutters that will make many moldings and rails and stiles for raised panel doors. By combining different cutters. Changing height and fence position, and making multiple passes the cutters can produce many different profiles. Profiles include: beads. Ogees, half rounds, corner rounds, rabbets, coves, grooves, crown molding, chair rail, and many more. This set will also make rail and stile doors both in 3/4" stock and 1" stock with interlocking profiles. This Shaper Cutter Set is so versatile that it can make a complete raised panel door including the door lip. 3/4" bore. Your order will be shipped via FREE USPS Priority Mail. My official Ebay handling time on orders is 2 business days. But almost all my orders are dropped off at the Post Office the next business day. I will send you a confirmation message after processing your order, and I will post a tracking code on Ebay for you to follow. Thanks for looking. Please have a look at my other items for sale.
DESCRIPTION: USED. LOOKS NEW, AMANA CARBIDE TIPPED SHAPER CUTTER NO. 971. 1/8 RADIUS X 2 5/8. THE ARBOR IS 3/4 BUSHED DOWN TO 1/2" CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT ... moreWAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWE
SCMI T120K WOODWORKING SHAPER w POWER FEED SERIAL-KF 1740282 THIS IS A NICE HEAVY DUTY COMMERCIAL SHAPER THAT CAME OUT OF A CLOSED WOODWORKING SHOP HERE IN DENVER. UNIT COMES AS PICTURED. THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION. THERE IS A $25 PALLET FEE FOR THIS ITEM! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" then you are ... moreto assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing the items for shipment. 4. We gladly accept PAYPAL or email me about payment options. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7
3/4 shaft shaper head 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143ee847028-0xfe-
3/4 shaft bearing for doing radius work on shaper
This auction is for a pair of fully reconditioned vintage Delta woodworking machines. A Unisaw and a HD shaper. This auction is for a 1945 Delta 10” Unisaw and a Delta Heavy Duty shaper of the same era. Both machines have been totally disassembled and completely rebuilt. Both machines are in excellent condition. Fully functional, and ready to run with no additional effort or required work. They are being sold as a pair and will not be offered separately. The Unisaw The saw is Model#1450. Serial number 38-2405, and was built in August of 1945. The saw has a 27” x 36” top, comprised of the base center unit and two extension wings. This saw was totally disassembled, with all components being thoroughly cleaned and/or sandblasted before everything was finish painted and reassembled. The saw is as good on the inside as it is on the outside. There ... moreis no rust or corrosion on this saw. The cabinet has no dings. Dents, or extra holes in it. The cast iron base is as solid as the day it was made. The following list details the saw’s rebuild work and features: The arbor bearings were replaced with new. The matched set of three v-belts is new. The electrical cord and plug are new. The shafts. Spacers, and gears were cleaned and/or polished like new. Thrust washers at the lift and tilt shafts are new. A galvanized sheet metal cabinet bottom plate was installed to replace the original carbon steel piece. The 1½ HP repulsion induction. High torque motor was reconditioned. The work included installing new bearings and brushes. The electrical switch is a new Pass-Seymour single pole commercial toggle switch. Reworked to correctly fit the cast switch housing. The Unisaw switch plate is a new reproduction stainless steel replacement plate. The dust door was missing. But has been replaced with a CNC water-jet cut Baltic Birch plywood non-louvered. Non-leaking door. No-drill” wrench hangers were installed at each front table top bolt. The saw top is free of holes. Flat, and has a fine grain sanded finish. T
Type: SHAPER Manufacturer: UNIQUE Model: 325 Shape and Sand Electrical Specs: 460 V. 3 Ph, 60 Cy 325 Shape and Sand is capable of stackable spindles. Variable speed 35 ft. per min- 5 rows of staggered urethane hold down rollers- Air jets on all sander stations- Stackable spindle capability- 4 total stations with clock wise or counter-clock wise rotation on spindles- overload protection for each station Technical Specifications: 460V. 60CY, 3PH(2) 7.5HP Baldor belted motor- 6.000 to 7,500 RPM spindle shaping stations, non-tilting, 1-1/4" spindle diameter with 5" stacking capacity. 2) 1HP Baldor reversible variable speed AC belted motor- sanding stations equipped with(6) air jets per sanding station to minimize dust build up. Non-tilting 1" spindle diameter with 5" stacking capacity for up to 8" diameter sanding heads, ... moreincludes horizontal and vertical digital position indicators in 0.001" increments. 2HP Baldor AC variable speed feed motor up to 35 FPM drives heavy duty infeed chain with 6" wide metal plates with replaceable urethane pads. Upper feed section consisting of(5) staggered rows of urethane hold down rollers, feeds from right to left. Heavy duty fence with leadscrew adjustment and digital position indicator. Item was pulled out from liquidated woodworking business. Machine is in very good working condition- has been tested and it's ready to go. We can arrange freight in contiguous U.S. You can also come. Pick-up and check what I have at my shop in Santa Anna, CA. 626*329*3980. Flat shipping fee( Local Pickup or freight) U.S. Only. NO international shipping!
YOU ARE BIDDING ON A USED LOT OF SHAPER CUTTERS. I GOT THESE AT A GARAGE SALE AND KNOW NOTHING ABOUT THEM! THE BOXES READ AS FOLLOWS: DELTA CAT#45 921 COMPLETE CABINET SET. DELTA CAT# 45-941 CONCAVE STILE, ROCKWELL INT. CAT# 43-901 DOOR LIP, ROCKWELL INT CAT# 43-947 RAIL FOR CONVEX STYLE, ROCKWELL INT CAT# 43-915 COVE, BEAD, R.H. COPE, GRIZZLY MODEL G1562. ALL OF THESES ARE FOR 3/4" HOLE WITH 1/2" BUSHING. COMES WITH EVERYTHING YOU SEE IN PICS. ALL ITEMS ARE AS THEY APPEAR IN PICTURES!~!~ BUYER IS TO PAY $12.00 MAIL BASED ON BUYER LOCATION. PLEASE EMAIL ME ANY QUESTIONS YOU MAY HAVE AND I WILL DO MY BEST TO ANSWER THEM. AS SOON AS YOU RECEIVE YOUR ITEM AND ARE SATISFIED PLEASE LEAVE POSITIVE FEEDBACK AND I WILL DO THE SAME. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE PLEASE CONTACT ME ASAP SO WE CAN COME TO A SOLUTION. ... moreNO RESERVE! GOOD LUCK
This listing is for a vintage used Dewalt Radial Arm Saw Shaper Guard. There are 2 other guards also included as seen in photos. This comes in original Dewalt box marked- Part No. 119826 Shaper Guard. This sells“as is” I do not take offers after the auction ends on items that do not sell. If you are interested in this item. Use the BIN to purchase it. This item ships with a USPS tracking number, buyer may request insurance. I DO NOT SHIP OUT OF THE UNITED STATES. RETURN POLICY* On items I sell I try to provide as much descriptive and photographic information on condition. Size, known damage and what it is you are buying as my space and knowledge will allow. I try to provide as accurate information as possible and will try to answer additional questions when asked, if possible. If an item is listed as untested or unknown if item works, it ... moreis usually because I have no ability or means of testing it, not that the item does not work, it means I do not know. For this reason if an item is listed as selling“as is” there is no return of this item unless I have made a major error in its description. I have no desire to deceive my buyers and I also have no desire to be taken advantage of by a buyer. I DO NOT SHIP OUT OF THE UNITED STATES. SHIPPING TIME* Barring unforeseen circumstances. Purchases are normally shipped within one business day from when your payment is received. When this falls on a holiday, weekend or special occasion this would be the shippers next day of operation. If payment for your item is made after 8:00 AM EST on a Friday your item may be shipped on the following Monday. Please understand that I can only ship in a timely manner, I can not control the speed of the postal service or any other shipper. Shipping to the west coast, shipping during holiday periods and shipping via media mail are often slower. When your item is shipped I will provide you with a delivery confirmation or tracking number to show your item was shipped in a timely manner and so you can monitor its progress.
This is a WALKER TURNER"ADD-A-TOOL" MACHINE which was sold in the late 1930's. The idea was to allow the purchaser to buy a basic 7-1/2" x 30" WOOD LATHE and then add various components including a 7" TABLE SAW. With rip fence and miter gauge, GRINDER and BUFFING ATTACHMENTS, A COMPOUND SLIDE REST for Metalworking a STEADY REST, a JOINTER SHAPER FENCE AND TABLE, a MORTICE ATTACHMENT, FENCE AND HOLD DOWN and a MULTI-SPEED MOTOR BRACKET. A metal bench with casters was available with plenty of surface area to add a 500 SERIES JOINTER and BAND SAW, or JIG SAW which would be driven by the same motor by means of a FLEXIBLE SHAFT. A WOODEN TOOL CABINET was also an optional accessory. This is the only one of these machines I know of, even vintagemachinery.org only shows this one. I have included the following in this ... moreoffering: WOOD LATHE with DOUBLE TOOL REST AND SINGLE TOOL REST(TWO TOOL REST SUPPORT BRACKETS) TABLE SAW with RIP FENCE. MITER GAUGE with REPEAT CUTTING GUIDE and BLADE GUARD with SPLITER, JOINTER SHAPER FENCE AND TABLE WITH SPRING HOLD DOWN MORTICE ATTACHMENT with MORTICE FENCE AND HOLD DOWN and HOLLOW CHISEL HOLDER MULTI-SPEED MOTOR BRACKET with a 1/2 HORSEPOWER WALKER TURNER MOTOR enabling 9 SPEEDS by using FOUR STEP PULLEYS and TWO"V" BELTS. Note the belt from motor bracket to headstock pulley was not installed when these photos were taken because the machine is on public display so for safety reasons it is only put on when in operation I also included original DRIVER LINE TABLE SAW BLADES. STACK DADO BLADE SET, MORTICE HOLLOW CHISELS, SPUR CENTER, DEAD CENTER, FACE PLATE, SANDING DISC and WALKER TURNER REVERSING VARIABLE SPEED CONTROL SWITCH. This machine was totally restored by AMERICAN MACHINE of Shelby NC and can be viewed under power in our shop
This is a Vintage 20 1/2" Long Jointer Shaper Fence from a Vintage Shopsmith 10-ER Multi- Purpose Woodworking Machine Serial#42708. Minor wear and tear rust and dust and dirt but in very good working condition. Made by Magna Engineering Corp San Francisco Local Pick-up available. I will combine shipping when practical on multiple purchases. Please complete bidding then request a combined invoice 14-004
Old Double A Products Co tabletop style router or shaper. Looks an awful lot like some hobbyist type Walker Turner equipment I've seen. Don't know anything about Double A other than the obvious Ann Arbir Michugan connection. Unit is grimey and has discoloration. Rust and signs of use. Belt is rotting but believe this can easily be put back to use. Will ship in flat rate box(disassembled) Winning bidder pays $12.35 shippjng. Please see photos for better idea on condition and please email me with any questions or for additional photos. Please see my other auctions. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1441c07aae8-0xce-
Metal Stand/ Legs for A Porter Cable Model 698 Shaper tableCondition is used. Works as it should. The ROUTER TABLE is in another auction and is NOT included in this auction you are bidding on the Metal Stand only. Questions on this auction? call Joel@6512487314 go to classicboathardware.com By bidding you are accepting the item as is. Where is, there are no warranties or guaranties on this item. There will be NO refund on this auction.
Porter Cable Model 698 Shaper table. Condition is used. Works as it should. The stand is in another auction and is NOT included in this auction you are bidding on the bench top 698 shaper table only. Questions on this auction? call Joel@6512487314 go to classicboathardware.com By bidding you are accepting the item as is. Where is, there are no warranties or guaranties on this item. There will be NO refund on this auction.
Rockwell 43-350 3HP Shaper General Info: Stock# CD-141039 Machine Name: Rockwell 43-350 3HP Shaper Condition: Used. Good Tested: Yes. Good Working Condition Brand: Rockwell Model: 43-350 Serial: KB6487 Year: N/A Shipping Weight: 400 Lbs. Shipping Dimensions: 48" L x 40" W x 52" H Location: Stone Mountain. GA Specifications: Rockwell 43-350 3HP Shaper. 3HP Main Motor. 230/460V, 3-Phase, 27" x 28" Cast Iron table, 3/4" Spindle, 3" Spindle Travel, Fence, On/Off Button. Additional Info: The Rockwell 43-350 3HP Shaper has been tested and is in good working condition. If you are looking to upgrade to this Shaper from one you are currently using visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone ... moreMountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
Professional Shaper This is a stationary machine. It is in excellent condition. I bought it new and I have been the only owner. It has been very well maintained and is clean. It’s prewired for 230 volt power but can be switched to run on 115 volt as well. 2 speeds. 8,000 and 10,000 rpm. The spindle runs clockwise or counterclockwise. It has 3 spindles: 1/2, 3/4 and 1” You can use router bits in this shaper too. I have 2 collets, 1 for 1/4” and 1 for 1/2” shank router bits. The fence system is equipped with a dust shoot. It will come with 14 carbide tipped cutters for the 3/4” spindle. They are sharp and in perfect condition. I build raised panel cabinet doors, mantels with fluted columns, moldings, drawer parts, ogee edges on tables etc. I am not in business full time anymore so I don't do work like this. I don't like seeing this ... moreshaper in my shop just sitting there not being used. You are welcome to come and look it over and see it run. Feel free to contact me with questions. This is a must see! It cannot be shipped or delivered. It must be picked up in Brooks. Oregon.
Freud WB101 The Woodworking Box Complete Door and Molding Shaper Cutter Set- 3/4-Inch Bore Thick micrograin carbide tips Kickback reducing design All Freud Shaper Cutters feature our exclusive Micrograin carbide for the longest life and kickback reducing design for added safety. These cutters are computer balanced and the cutting edges are precision ground for the smoothest cuts without vibration or chatter. Perma-Shield Coating on most Freud cutters results in less stress on your shaper for a faster cut and less tool maintenance. Payment Methods: You may pay instantly with PayPal by clicking the pay now button at the top. Credit cards: Visa. Master Card, Discover via phone direct. American Express only accepted with PayPal. 509-327-5544 M-F 9-6pm Pacific Time. Ask for Donny. Payments with PayPal and Credit Card orders will ship upon receipt ... moreof payment or after being cleared by Pay Pal. Pay Pal Check payments may take up to 4 days to clear Pay Pal and then shipped. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary. But are the same product. Payment is expected within 14 days of auction close. We can not guarantee availability of product if you are past 14 days& items is re-listed. Buyer is responsible for all shipping charges. Unless Specified by Doughboys Tools& Equipment. Shipping: SAVE on SHIPPING Combined shipping ONLY when multiple items are purchased in your shopping cart as per E-Bays New Shipping policy’s as summer of 2013. Any additional item paid and shipped together with the first one. The discount will only show when you REQUEST INVOICE after your last bid and based on all items in your shopping cart. BULKY AND HEAVY ITEMS MAY BE EXEMPT FROM COMBINED SHIPPING DO TO BOX SIZE& WEIGHT. WE SHIP FASTER AND WITH BETTER PACKED PACKAGES THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our RETAIL STORE, and mo
SCM T100 Linvincible 5HP Shaper General Info: Stock# CD-141034 Machine Name: SCM T100 Linvincible 5HP Shaper Condition: Used. Fair Tested: Yes. Good Working Condition Brand: SCMI Model: T100 Serial: N/A Year: N/A Shipping Weight: 1500 Lbs. Shipping Dimensions: 48" L x 40" W x 52" H Location: Stone Mountain. GA Specifications: SCM T100 Linvincible 5HP Shaper. 5HP Main Motor. 220V, 3-Phase, 33" x 28" Heavy duty cast iron table, 3/4" Spindle, Fence with micro adjustment, Miter Slot, Magnetic starter. Additional Info: The SCM T100 Linvincible 5HP Shaper has been tested and is in good working condition. The way the machine is wired. Only the magnetic starter turns on/off, the speed switch has been disconnected from the unit. If you are looking to upgrade to this Shaper from one you are currently using visit our to ... moreget a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
I came across a box of metal cutters mixed in with some other tools. The seven cutters look to me as if they are designed to go on a 1/2" spindle shaper used in woodworking. They are all designed to cut different molding profiles with the exception of one that would appear to be used to bore a hole. In the box was also a 1/2 shaft(4 1/2" long) that ends with a carbide cutter. You get all 8 Pieces. Picture 2 shows three cutters: from left to right they are marked: LS-16. LS-17, and LS-18, and MADE IN USA. Picture 3 shows three cutters: from left to right they are marked: LS-19. LS-26, and no markings. The first two are also marked MADE IN USA. Picture 4- there are no markings on the two cutters.
DESCRIPTION: USED. COLLARS FOR SHAPER CUTTERS. THEY ARE USED ON 1/2" SPINDLE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND
5HP Shaper General Info: Stock# CD-141043 Machine Name: 5HP Shaper Condition: Used. Fair Tested: Yes. Good Working Condition Brand: N/A Model: N/A Serial: N/A Year: N/A Shipping Weight: 400 Lbs. Shipping Dimensions: 48" L x 40" W x 50" H Location: Stone Mountain. GA Specifications: 5HP Shaper. 220V, 3-Phase, 30" x 28" Table Top, 3" Spindle Travel, 2-Speed, Magnetic Starter, Forward/Reverse Switch, Cord. Additional Info: The 5HP Shaper has been tested and is in good working condition. What you see in the photos is what you get. It does not have fence or spindle. If you have surplus machinery, visit our to get a price quote on what we will buy or trade it for. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine ... morethan the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
This is a lightly used or new set of 4 shaper collars from a 1981 Vintage Shopsmith Mark V Power Tool Woodworking Machine from Vandalia Ohio In very good condition. Local Pick-up available. I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. 14-012
Freeborn Shaper Cutter Set 6 Pc. Cope Stick Set Cabinet Doors JK11K Versatile and easy to use. This Set Does the Classic Quarter Round Detail Counterclockwise Rotation 3 Wing 2 15/16" Diameter 3/4" Bore Carbide Tipped Great Cutters ~ Nice Tight Fit No Nicks ~ Sharp Ready to Go Check Images as They are Part of the Description Thanks for Looking Good Luck
Used one time to fabricate a dozen small boxes. Finish appears perfect. Is complete with all stops and parts. A necessary fence jig for precision woodworking. I will be happy to answer any question. I do not sell damaged. Or junk items on E-bay. Overseas bidder, please contact me for shipping cost prior to bidding. Thanks for looking.
This is a Rockler 1/2" shaft router/shaper bit. This bit is for creating the popular cabinet door edge. This edge creates a lip that can be grabbed easily thus eliminating the need for a door pull. This bit is slightly used and still very sharp. Please look at pictures closely and message me with any questions. I will ship within 2 days of cleared payment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-144b274fbc6-0xea-
This auction is for 5 professional pieces of woodworking equipment. All equipment is high end. Previously owned equipment in excellent shape. All equipment is 3 phase equipment but we are throwing the 3 phase converter(romp phase converter-see last picture) with this sale. Items are from a family estate and being sold as a package only and as is with no returns. There will be"Local Pick-up Only" on these items. Items are located in Savannah, GA on Skidaway Island. Bid is starting at $8000.00 for all items. Items included are listed as follows: Oliver Machinery Co. Planner. No. 399-D, SN 91520(1958?This is an 18" planner, 3 hp, in perfect condition with new blades and guide sharpener for blades. Oliver Machinery Co. Table Saw. No. 270-D, SN 91048(1958?Has a 12" blade at this time but will take up to a 14" blade. Has ... moreextra blade set with it and set of dato blades also. Yates American Machine Co. Spindle Shaper. N-4, B18672(1943)reversible spindle shaper, type N-4. Similar in build to the Oliver 285 and the Onsrud W200. The Yates is the Cadillac of spindle shapers. If you are looking for the best of the best this is it! Has a heavy duty fence and a set of bits for the machine. Has a set of spacers and 2 main jam nuts included. Spec: Spindle diameter 1 1/8" Spindle length is 8" 3 phase, 5 hp, 220/440 volts, Round over bit set, cabinet set, raised panel, and tongue and groove set included. J.A. Fay& Egan Co. Cincinnati. OH 506 Lightning Jointer(1920?12 inch, 3 phase machine. Great working condition with 5 hp motor. Rockwell Radial Arm Saw. Model 16-RAS, SN 6W3056, 16" saw with one extra blade. New factory table top, new bearing, great shape! Please feel free to contact us with questions on this equipment. Buyer will be required to pick items up locally by appointment.
Up for is a barely used in excellent condition Grizzly drop-leaf cove shaper cutter. It has a 3/4" bore. Grizzly retails new $39.95.Message me before check out if you purchase 2 or more of my cutter listings so I can send you an invoice on a combined shipping to save you money. Thanks for looking.
Up for sale in very good working order is a 1/4" 3/4" Quarteround combo shaper cutter. You are essentially getting two cutters in one.Message me before check out if you purchase 2 or more of my cutter listings so I can send you an invoice on a combined shipping to save you money. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144ef8c783f-0x10d-
This shaper cutter is made by woodcraft. Though it is used it is in perfect like new condition. It has a 2 5/8" diameter with a 3/4" bore but does have a 1/2" bushing for the smaller spindle shapers.Message me before check out if you purchase 2 or more of my cutter listings so I can send you an invoice on a combined shipping to save you money. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-144ef8c7695-0x102-
This is a cabinet door lip shaper cutter with a 3/4" bore and 2 5/8" diameter. Though it is used it is in excellent condition with no signs of wear or chips barely used.Message me before check out if you purchase 2 or more of my cutter listings so I can send you an invoice on a combined shipping to save you money. Thanks for looking.
This shaper cutter is in excellent sharp condition like new. It has a cut height of 19/32" Diameter of 2 5/8" and a 3/4" bore. Will work good with some of my other cutters. Please check them out.Message me before check out if you purchase 2 or more of my cutter listings so I can send you an invoice on a combined shipping to save you money. Thanks for looking.
This 3/4" bore 2 5/8" diameter 1" high shaper cutter is in excellent very sharp condition with no signs of wear or chips.Message me before check out if you purchase 2 or more of my cutter listings so I can send you an invoice on a combined shipping to save you money. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-144ef8c75a5-0x101-
Up for sale is a 3/4" bead cutting 3/4" bore shaper cutter in very good sharp working order.Message me before check out if you purchase 2 or more of my cutter listings so I can send you an invoice on a combined shipping to save you money. Thanks for looking. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144f0914757-0x110-
DESCRIPTION: USED. SHAPER SPINDLES FOR J33 TAPER DRILL PRESSES. LOOK AT THE PICTURES. A COUPLE ARE MISSING THE RETAINING NUT AND COLLAR. THE AUCTION IS FOR ALL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS ... moreAND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE
Delta Rockwell 43-340 Heavy Duty Shaper General Info: Stock# CB-141002-24 Machine Name: Delta Rockwell 43-340 Heavy Duty Shaper Condition: Used. Good Tested: Yes. Good working condition Brand: Delta Rockwell Model: 43-340 Serial: GX4561 Year: N/A Shipping Weight: 400 Lbs. Shipping Dimensions: 48" L x 40" W x 50" H Location: Stone Mountain. GA Specifications: Delta Rockwell 43-340 Heavy Duty Shaper. 1.5HP? 230/460V, 3-Phase, 1/2" Spindle, 3" Spindle Travel, Fence, Forward/Reverse Switch, On/Off Switch. Additional Info: The Delta Rockwell 43-340 Heavy Duty Shaper has been tested and is in good working condition. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If ... moreyou have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
PICK UP ONLY Trenton. IL NO PAYPAL Cash or Check at Pick up Used Delta 3 Wheel Powerfeed Model# 34-995 3 PHASE 3/4/1 HP 1725/3400 RPM 2 speeds Forward& reverse www.kunzcarpentry.com Kunz Carpentry 618-224-9636 Powered by The free listing tool. List your items fast and easy and manage your active items.
A VERY NICE HARDLY USED#27 POWERMATIC SHAPER.USED IN HOME WORKSHOP ONLY,INCLUDES JET MODEL#JPF-48-3 POWERFEEDER BOTH IN PERFECT WORKING ORDER,A LITTLE DUSTY BUT VERY NICE,NEED TO MAKE SOME ROOM,SO BUY IT NOW WITH NO RESERVE THANKS FOR LOOKING AND LOCAL PICKUP IS ALWAYS WELCOME AND REMEMBER TO CHECK OUT OUR OTHER AUCTIONS