|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
Free Shipping Condition: Used Location: Wilmington, United States Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
Buy It Now
Free Shipping Condition: New – Open box Location: Wilmington, United States Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
Buy It Now
Free Shipping Condition: Used Location: Wilmington, United States Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$6.00 Shipping Condition: New Location: Durham, United States Delta Rockwell Cutter Set 35-191, 3 Piece Molding Head Cutting Knives.
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Lot of weinig Moulder/Shaper head shaft spindle spacers. Everything photographed is included in the lot. Bore size is 2-1/8” on all of the spacers.See ... moremy other listings for knives or heads.
Buy It Now
Free Shipping Condition: Used Location: Pompano Beach, United States Schmidt 15 Degree Shaper Head ID8240A. Used but in very good condition. Bore and head are immaculate. Small chip in carbide on replaceable knife . 1 1/4” ... morespindle size.6” diameter 2 1/2” height Charles G.G Schmidt & Co. flooring shaper cutterhead Free USA shipping Amana, Freeborn, Shaper Cutter, Bit, Woodworking
Buy It Now
$24.75 Shipping Condition: Used Location: Raymond, United States This is part of my corrugated knife collection that I used with my shaper. Tons of different profiles. Crown, base, table edge, cove, raised panel, flute, ... moreogre, and just about everything else. The shaper head is 4” diameter and 4” height. Please study the pics. I am open to serious offers. The shaper head is for a 1 1/4” arbor shaper. These typically run over $300 alone new. If you have purchased moulding or knives you know this stuff is very expensive now! If you like playing around with moulding then this set is for you. Please ask if you have any questions!!
Buy It Now
$6.00 Shipping Condition: New Location: Durham, United States Delta Rockwell Cutter Set 35-198, 3 Piece Molding Head Cutting Knives.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.45 Shipping Condition: Used Location: Montville, United States This is set of three (3) matched molding knife blades for a shaper head. Blades are 1" wide. 160" thick, and 1-1/2" long. 5/16" bolt hole mount. One side ... moreis about a 3/8" radius, and the other side about 5/8" radius.
Buy It Now
$6.00 Shipping Condition: New Location: Durham, United States Delta Rockwell Cutter Set 35-235, 3 Piece Molding Head Cutting Knives 3/8 Flute Knife. Rockwell Delta Cutter Set 3 piece molding head cutting knives Set ... more35-235 3/8 Flute Knife.
Buy It Now
$30.00 Shipping Condition: New Location: Ukraine Planing and Jointing Spiral Cutter Head L=2"- 10". The helix head high performance helical cutter head is enhancing the woodworking industry. D=5 1/2" ... more( with inserts). Body material - aluminum alloy.
Buy It Now
$24.63 Shipping Condition: Used Location: Salem, United States Top is 16 1/2" x 12 1/2" and it is 26" tall.
Buy It Now
$5.00 Shipping Condition: New Location: Ukraine Planing and Jointing Spiral Cutter Head L=2"- 8" D=3". The helix head high performance helical cutter head is enhancing the woodworking industry. Body ... morematerial - aluminum alloy. We will work with you to find the best solution for both of us.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is a well used but still very nice Miter Master from the Master Specialty co. of Minneapolis. Minnesota. In very small letters under the oblong opening ... moretoward the top it says"Dowel and Drill Diameter Gage" Off to the side there is a series of holes that says"Marking Gage Insert" There is a little wing nut on the front on the bottom panel that when loosened the top angels back and forth. I have looked all over this item but I don't find a date anywhere. However it does say"Patent Pending" so I would think that it makes this a very early make of this particular product. This gage is in need of a cleaning so you can read all the wording and measurement details more easily but I didn't want to clean away the details that may come with it. This gage is attached to a thin wood base which makes it free standing. The gage is 8" tall and at the wides paint just 7" wide. This gage is black on top and the bottom is a dark olive gree. This probably came out of my grandpas tool crib. Because he was a Mr. Fixit and had just about every tool there is. The Gage you see in the photos is the gage you will recieve. I am no handy man so my description is based upon looking at previous Ebay sales and research on Bing. I accept only PayPal. Payment is due within 3 days of committing to purchase. I will ship only to continental USA addresses.I will NOT ship to p.o. boxes. So please have a physical address prior to committing to purchase. Please note- All sales are FINAL. I do not accept"returns" simply due to the fact that I am not a dealer but a private seller. Please take a minute to look at my other auctions. Thank you and Happy Bidding! jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13d1d9c1ea2-0xfe-
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
Free Shipping Condition: New Location: China Are you looking for professional, yet affordable vacuum cleaner brush tool adapter?. Are you in search of sturdy, trustworthy tool that can do multiple ... morejobs at once?. If yes, look no further! It is one of the best choices for you.
Buy It Now
$38.75 Shipping Condition: Used Location: Enola, United States A shaper blade or cutter to make 1" X 1/2" shoe molding. Looks to be in good lightly used condition. We have been giving quality service to the on-line ... morecollector community for over 19 years. Expect minor evidence of use or imperfections, dings etc. from age.
Buy It Now
$6.00 Shipping Condition: New Location: Durham, United States Delta Rockwell Cutter Set 35-103, 3 Piece Molding Head Cutting Knives.
Buy It Now
Free Shipping Condition: Used Location: Wilmington, United States Most appear new and the used ones appear to be in good/great condition. Sold AS-IS.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom Base Board. Most of the knives have only been sharpened lightly ... moreonce so they are practically new. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Introduction: 1. The punch former is a tool which grinds the standard punching pin head blade(POINT) 2. There is centre hole, the longer punch pin and ... moreits body can through it easily and be clamped rasily. 3. Regardless of the circular, the round art. the polygon and so on,each kind of different shape punch cutting edge,according to the equalpart sangle adjustment division,it can complete the angle or the circular art which you need without taking down in process. 4. The accessory arm and angle trimming and diamond tools can easily trim the concave-convex R of grinding wheel,and various forming angles,so it is unnecessary to get other triming tools. Specification: Height of rotation center:80mm 24sub division:sub-degree 15° Clamping diameter in V-solt:3-30mm Clamping up & down in-solt:25mm.
Buy It Now
Free Shipping Condition: New Location: Linden, United States [CNC Aluminum Alloy Material] This dowel maker jig kit is made of premium CNC aluminum alloy material, and the surface is anodized, rust-proof and durable ... moreto use. 1 × Dowel Maker Jig. Blade specification: 15×15×2.5mm 30°R150.
Buy It Now
$25.00 Shipping Condition: Used Location: Layton, United States Moulder/Shaper cutting heads for industrial size machines. I have 8 available at the moment.In very good used condition Size: 150mmx100mmx2-1/8”Brand: ... moreWeinigKnives are also available on my page in lots if you are in need of them.
Buy It Now
$12.00 Shipping Condition: Used Location: Washburn, United States SY industrial part # C2121 ¾ ” bore woodworking “V” paneling cutter head. Looks like it has been used very little.
Buy It Now
$25.00 Shipping Condition: Used Location: Layton, United States Brand: weinigSize: 150mm x 60mm x 2-1/8 bore Moulder cutterheads / shaper cutterheads I have knife sets available in my other listings for the heads as ... morewell if interested.There are 11 of these heads available for sale, contact me for a bulk discount if that’s something you are interested in.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Powermatic TS29 Shaper, 7.5HP 3PH 230/460V, Sliding Table. Style (Type) Shaper. Sliding table with 4-foot stroke works with miter head, hold-down and ... morefence to accommodate everything from multiple end cuts to tenons.
Buy It Now
$6.00 Shipping Condition: New Location: Durham, United States Delta Rockwell Cutter Set 35-221, 3 Piece Molding Head Cutting Knives.
Buy It Now
Free Shipping Condition: New Location: United States Each table saw pusher also prevents tear-out so you never again have to refabricate. The rubber foam friction pad is smooth, slip-resistant, and prevents ... moreyou from scratching your workpiece. Wipe clean with cloth.
Buy It Now
$20.00 Shipping Condition: New Location: Monroe Township, United States Introduction: 1. The punch former is a tool which grinds the standard punching pin head blade(POINT) 2. There is centre hole, the longer punch pin and ... moreits body can through it easily and be clamped rasily. 3. Regardless of the circular, the round art. the polygon and so on,each kind of different shape punch cutting edge,according to the equalpart sangle adjustment division,it can complete the angle or the circular art which you need without taking down in process. 4. The accessory arm and angle trimming and diamond tools can easily trim the concave-convex R of grinding wheel,and various forming angles,so it is unnecessary to get other triming tools. Specification: Height of rotation center:80mm 24sub division:sub-degree 15° Clamping diameter in V-solt:3-30mm Clamping up & down in-solt:25mm.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$6.05 Shipping Condition: New Location: Wilton, United States 27 SETTING UP. ...... 27 DRILLING. ......
Buy It Now
$48.65 Shipping Condition: Used Location: Millersburg, United States Lift Tables. These heads weigh over 5lb each. Country of Manufacture N/A. It is neither inferred or implied that any item sold by Arrow Industrial is ... morea product authorized or in any way connected with any manufacturers displayed on our pages.
Buy It Now
Free Shipping Condition: New Location: China Feature 【Wide Application】W1218A Indicator is ideal for checking any planer and other machine setups, tolerances and adjustments. Use the indicator to ... morefine-tune and perfectly set up your planer, table saw, jointer, drill press, or shaper. 【Versatile and Useful】Fine-tune your planer for consistent, even feed speeds and reduced chatter. Quickly and accurately adjusted infeed and outfeed rollers, pressure bars, feed-bed rollers, chip breakers, etc. .
Buy It Now
Free Shipping Condition: New Location: China There are Woodworking Pencil Refills, useful and flexible. The woodworking marker is easy and convenient to use. - graphite, this Carpenter Pencils Refill ... morewill give you a nice writing experience. 10 Pcs Wen Tools for Woodworking Carpentry Short Version Drill Industrial Bits.
Buy It Now
$90.00 Shipping Condition: New Location: Ukraine D=290mm B=90mm. The cutter head high performance is enhancing the woodworking industry. For woodworking & other machine. Bore - 80 mm. Cutting Length ... more- 90 mm (3 ½" ).
Buy It Now
$18.90 Shipping Condition: New Location: China Dowel maker M6, M8, M10, M12 HSS cutter head woodworking punching straight hole locator. 1 Dowel Maker. After marking the board, put a circular pointer ... morein the drilled hole and align it with the drawn line to easily find the center point.
Buy It Now
Condition: Used Location: Lansing, United States GANNOMAT DS 32. 2:GannoMat DS-32 ELEKTRONIK BORING MACHINE. Two-line boring machine (10 horizontal & 23 vertical spindle drill heads on a 32 mm system ... more. 1:Custom Built LAMINATE BENDING MACHINE ( 2 avail.). ).
Buy It Now
Condition: New Location: Fort Myers, United States And just like the MIKRON R200, wood blanks are stacked in the hopper, the cutting head is aligned and the rest is left up to the MIKRON R300, producing ... moreupto 350 8" rosettes per hour. uses standard rosette corrugated 2-knife cutting heads.
Buy It Now
Free Shipping Condition: New Location: China Blade material: HSS high speed steel. Drill sleeve specification: M6/M8/M10/M12. Function: drilling, taking center point. We continually strive to update ... moreand improve our product line. We are always glad to assist you and stand by our products.
Buy It Now
$7.00 Shipping Condition: New Location: Кам'янець-Подільський, Ukraine Planing and Jointing Spiral Cutter Head L=2" - 8" D=4". The helix head high performance helical cutter head is enhancing the woodworking industry. Body ... morematerial - aluminum alloy. We will work with you to find the best solution for both of us.
Buy It Now
$30.00 Shipping Condition: New Location: Ukraine Planing and Jointing Spiral Cutter Head L=2" - 9" D=5". The helix head high performance helical cutter head is enhancing the woodworking industry. Body ... morematerial - aluminum alloy. We will work with you to find the best solution for both of us.
Buy It Now
$9.00 Shipping Condition: New Location: Trumbull, United States WE CARRY OTHER PARTS FOR THESE UNITS ALSO. Bridgeport Milling Head Repair, Inc. "The Bridgeport Experts".
Buy It Now
Free Shipping Condition: New Location: China If yes, look no further! - premium graphite, this carpenter pencils refill will give you a nice writing experience. Aluminum Alloy Kerosene Lamp Accessories ... moreMason Jar Retro Oil Burners. 100 Pcs Sinker Slides Fishing Line Space Bean Connector Accessories Marine.
Buy It Now
Condition: Used Location: Pomona, United States Length of Ram Stroke: 0 – 7″. Head Swivel: 360 Deg. Vertical Travel: 3″. Horizontal Travel: 9-1/2″. Vertical Travel: 5″. Depth of Table: 5-3/8″. Table ... moreSize: 6-5/16″ x 5″. Wheeler Machinery Sales, Inc.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States 1. NO SALES TAX 2. LOW COST EXPEDITED SHIPPING FOR US BUYERS 3. WE ARE NOW SHIPPING WORLDWIDE NEW Woodstock D1701 3-Inch Moulding Head System Cutter head ... morewith 1-Inch Bore $82.43 $110.95 Woodstock D1701 3-Inch Moulding Head System Cutter head with 1-Inch Bore- 3-Inch Diameter- 3-Inch Long- Accepts 2 inch and 3 inch Knives We only accept PayPal. + We are now shipping to worldwide addresses. The item is sent to logistic center in NJ and shipped from there to the rest of the world + International customers are responsible for all duties and taxes. Contact your local authority for questions related to the amount of duties or taxes you will be responsible for. + We ship within two business days of payment. Usually sooner. + Standard FREE shipping takes between 3-5 business days + We use a selection of shipping services such as UPS. FedEx, USPS etc. + Expedited shipping takes between 2-3 business days + Overnight shipping takes between 1-2 business days(Ships within 12 hours of payment) + We do not accept P.O. BOXES-PLEASE PROVIDE A PHYSICAL ADDRESS. We accept returns within 14 days from date you received the purchase. Please contact us for a Return Merchandise Authorization(RMA) number. Customer satisfaction is very important to us. If you have any problem with your order.Please contact us and we will do our best to make you satisfied, please do not leave a negative feedback. We guarantee that your issue will be solved quickly. As long as you are happy with your purchase. Please leave a positive feedback for us. Your feedback and DSRs are very important to us as better DSR scores affects our search placement on eBay. We will leave a positive feedback for you in return automatically. Thank you for looking at our list! You're welcome to watch other items we sell. If you have any questions please feel free to ask- We're always happy to answer your queries. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-145a91044bb-0x105-
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States DESCRIPTION: USED. DELTA MOLDING KNIVES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I ... moreWILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE TOOLS OF AN
Buy It Now
$18.90 Shipping Condition: New Location: China Dowel maker M6, M8, M10, M12 HSS cutter head woodworking punching straight hole locator. 1 Dowel Maker. After marking the board, put a circular pointer ... morein the drilled hole and align it with the drawn line to easily find the center point.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States D1700 2" Moulding Head with 3/4" Bore. The D1700 2" Moulding Head with 3/4" Bore is designed to be used on a vertical spindle shaper. A 2" moulding head ... moreto be used with 3" spindles. The moulding head accepts matched pairs of interchangeable, corrugated-backed high-speed knives (not included).
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom crown molding. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for making custom door and window casing.
|
|
|
|
Large Shaper Molder Cutter Head, 5" Tall, 1-9/16" Bore, 4-13/16" OD, 4 Knife
Wadkin 4 Knife Large Shaper Molder Cutter Head General Info: 5" Tall 1-9/16" Bore 4 Knives 4-13/16" Outer Diameter Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Rosette Cutter Head Lathe Shaper Custom 8" Diameter
This is a custom designed. One-of-a-kind cutterhead· Designed to cut large diameter rosettes and small radius profiled wooden parts. Mounted on a lathe headstock or other type of 1-1/2" threaded spindle. Uses standard corrugated knife stock. Head diameter = 8" Runs 2 knives. Max width 3-1/4" with option for running 2 more perimeter knives 1-1/2" width. Wt = 19 lbs· Includes one set of miscellaneous knives as a sample. For the custom shop or plant with the need for specialty parts. Original price exceeded $2500. Postage includes careful packing and fast shipping. Excellent condition. Terms and Conditions Payment: Payment for all auctions should be made with PayPal within 24 hours of the end of the auction. Shipping: I ship Monday through Friday using primarily USPS priority mail. Or Parcel Post. Shipments will ... moreonly be sent to eBay and PayPal verified addresses. Combined shipping is available but only for items purchased on the same day. And if packaging restraints allow it. An extra handling fee is charged to combine orders. That will be provided at the time of checkout or by request if needed. Handling time is usually two days from the end of the auction. Estimated shipping time is 2-3 business days from the ship date for Priority packages. Buyer is responsible for all shipping related costs for returned items. Feedback: The importance of good feedback is well known. I want to maintain a record of satisfied customers and will do everything possible to ensure you are pleased with your purchase. Each product is described as accurately as possible. And photographed to best display everything of interest. If there is a problem with your purchase. Please let me help to resolve it before leaving negative comments. My policy is to always leave Feedback. Generally after your feedback has been received. I do that so that I know you have received your purchase and are pleased with the transaction.
|
|
|
Shaper 3 Knife Corrigated Cutting Head
You are bidding on a Aluminum corrigated cutting head for a shaper. The arbor is 1" but could be machined out to 1 1/4" The diameter is 10" and is 2" high. Wt. 15 lbs. Do not bid on this cutting head unless your shaper is a heavy duty machine with a speed adjustment of 3500 rpm or slower! I have not run this cutter myself on my 1 1/4" shaper so can only pointout the potential issues. I would think it would run on a 1" spindle since that's whats there. It comes with the cutter knife that's in there now. You can't beat this price if you need a cutting head. Just be sure it will fit inside of the fence systems cutting area.
|
|
|
THIEL MILLING SHAPING HEAD ATTACHMENT SHAPER
USED THIEL MILLING SHAPING HEAD 2 HOLES 15MM DIA ACCROSS HOLES CENTER TO CENTER 180MM
|
|
|
saturn shaper head for rabbeting , sizing or other uses 1.1/4" bore 30mm height
older Saturn shaper head. Personally used for rabbeting and smoothing edges on lumber products and manmade sheetgoods, has other uses as well, 1.25 inch bore, 30mm in height, have several carbide inserts, some brand new some resharpened some used, sold as a package deal, what you see in pictures is what you get, sold as is no returns, for sale locally, I reserve the right to end auction early as it is for sale locally and other sites, thanks for looking relisted due to non paying bidder
|
|
|
Small 6" Metal End Stock & head for shaper or Milling
These were used with a shaper. Thank you for your interest.
|
|
|
woodworking shaper head bearing
3/4 shaft bearing for doing radius work on shaper
|
|
|
Aluminum Insert Head for Industrial Shaper
You are bidding on an Aluminum Insert Cutterhead for a Shaper. The head without the cutters is 10" in diameter and 2" high and the weight is 14 lbs. 8 oz. The arbor hole is only 1" but could be machined out to 1 1/4" The head takes corrigated backed knives. Do not bid on this cutter head if you don't have an industrial quality shaper with speeds under 3500 rpm's. I have not used this cutter head since the protected space inside the fence system I have will not accommodate this cutter. This was purchased along with a number of other cutterheads from an industrial auction house. I have left one insert cutter in the head for viewing purposes. The knives for this cutterhead are not for sale and are only shown for demonstration purposes. All three of the knife holders and corresponding set bolts are included in the ... moresale. Ships to the continental U.S. only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-143f7362095-0xee-
|
|
|
Vintage Dewalt radial arm saw multi guard/ shaper guard, knife, head - 30013
DeWalt/ Black and Decker Shaper attachment package with TR 6480 shaper head. TR 6477 Knife set and R 119826 tool guard. This was purchase and used one time. It is in like new condition and comes with instruction sheet and original box as shown. Photos are recent and actual. What you see is what you get. No Returns. No Refunds. No Warranty. Will only ship within the US48 Thanks for looking!
|
|
|
Grizzly C2175 Entry Door Shaper Cutter Head Set
Grizzly C2175 Entry Door Shaper Cutter Head Set Can use C2194 to extended panel slot with door cutter set Excellent Used Condition 1/2" 3/4" Spindal On Feb-03-14 at 17:17:02 PST. Seller added the following information: Grizzly C2194 in additional auction is the matching center cutter and center spacer for thicker center panels and/or door frames.
|
|
|
Kitchen Cabinet Reversible Rail &Stile Shaper Head 201-8401
Kitchen Cabinet Reversible Rail&Stile Shaper Head 201-8401 Excellent Used Condition Some discolor on red paint area 1/2" 3/4" Spindal.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1440bd8ee71-0xe4-
|
|
|
Frued Door Shaper Head Set EC-270
Frued Door Shaper Head Set EC-27 Excellent Used Condition 1/2" 3/4" bore
|
|
|
Vtg Dewalt Shaper Head-8 Sets Molding Knife Cutters-Collars-Tools-Book-Adapter
This listing is for a lot of vintage Dewalt parts and accessories as listed below. These came from an estate sale and contains both used and unused items. Many still in original boxes. Most items in good to excellent condition, some light surface rust on some items. There are 8 sets of molding knives/cutters, collars, adapter, book, adjustment tools and assorted other items. Included are the following: 1. 6480 2-knife shaper head- 5/8” arbor hole- 5” diameter. 2. 201262 R.H. adapter for 1/2- 20 internal threaded tools. 3. Molding knife cutters for# 6480 shaper head. A. 3) 3076- 5/16” bead and 5/16” cove(1) in box(2) no box. B. 3068- 3/16” bead and 3/16” cove in box. C. 3067- 3/8” quarter rd. in box. D. 6477- 2” straight knives in box. E. 3077- 5/16” cove and 5/16” bead in box. F. Unmarked cutter set. 4. Spacing collars- 2” O.D. x 5/8” I.D. ... moreA. RT2432- 1/16” thick in box. B. RT2433- 1/8” thick in box. C. RT2434- 1/4” thick in box. 5. 2 hex and 1 double end adjustment wrenches. 6. Dewalt woodworking book. 7. Dewalt Instruction and Maintenance Manual for Model 1200& 1400. 8. Few extras as seen in photos. This lot sells without reserve and“as is” I do not take offers after the auction ends on items that do not sell. If you are interested in this lot. Make a bid. This lot ships with a USPS tracking number, buyer may request insurance. I DO NOT SHIP OUT OF THE UNITED STATES. RETURN POLICY* On items I sell I try to provide as much descriptive and photographic information on condition. Size, known damage and what it is you are buying as my space and knowledge will allow. I try to provide as accurate information as possible and will try to answer additional questions when asked, if possible. If an item is listed as untested or unknown if item works, it is usually because I have no ability or means of testing it, not that the item does not work, it means I do not know. For this reason if an item is listed as selling“as is” there is no return of this item unless I have made
|
|
|
Stehle rebating insert cutter head 1 1/4 bore Shaper
Nice condition Higher end cutter head 125x50x1 1/4 bore Rebating cutter head 6 new inserts Tooling wrenches
|
|
|
3 SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER 6Y
3 SHAPER Cutter head KNIVES CARBIDE MOLDER WOOD WORKING ROUTER 6Y Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here are 3 used sets of Carbide SHAPER CUTTERS. The shaft holes are 1/2" and 1" They should be sharpened and that will take out some of the edge imperfections. These have been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for ... morebest view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Payp
|
|
|
1 SHAPER CUTTER HEAD CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11Y
1 SHAPER CUTTER HEAD CARBIDE 3 WING 1" bore MOLDER WOOD WORKING ROUTER 11Y Click to Enlarge Click to Enlarge Click to Enlarge 913 W 1# f11 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a used older Carbide SHAPER CUTTER. It is a 3 WING model with a 1" bore. Carbide is about.125 thick where I can measure it. They should be sharpened and that will take out some of the edge imperfections. This has been sitting for a spell in the garage and shows rust from no use. I took one of my listed shaper heads and put a wire brush to parts of it and the rust is removable. I used a wire brush on a drill press. I have other cutters in the store. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which ... moreis included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close
|
|
|
Saber Moulder Head #1 molder shaper head for wood shaper 2 1/8" bore
Item was pulled out from liquidated woodworking business. These are very heavy pieces for production of drawers and doors- check profile on the pics. We also have other blades and dado blades. You can also come and check what I have at my shop in Santa Anna. CA. 626*329*3980 Will ship by First Class Mail within U.S. Local pick-up is also available. Flat shipping fee( Priority mail) $69.00 U.S. Only NO international shipping!
|
|
|
Northfield Heavy Duty Shaper with Byrd Shelix head installed
A 1964 Northfield Heavy Duty Shaper in good condition. Serial number 644232. The table measures 36" by 26" The 3 HP motor requires 3 phase power and runs at 3490 RPM. These shapers now cost $8030.00 from Northfield. I installed a 3 1/4" by 3" Byrd Shelix head that comes with it. The spindle diameter is 1" I will take the listed price or best offer. Local pickup only. Check out my! I will contact the winning bidders by e-mail within 24 hours after the auction has ended. Winning bidders must confirm the order within 3 days. Payment must be received within 7 days after the auction has ended. All items not paid for within the 7 day will be relisted. I will combine shipping for multiple items purchased. And will contact you with the lower combined shipping price. Payment must be made via Paypal due to eBay rules. If you ... morehave less than ten transactions, please contact me before bidding. If you have a question, please ask me before you start bidding. Feel free to contact me with any questions you may have. If you have a problem, send me an email through the eBay system.
|
|
|
FELDER Insert Cutter Head 100X40X30 Bore Shaper
THIS IS A FELDER STRAIGHT SHAPER CUTTER W/ INSERT TOOLING, 30 MIL BORE CHECK OUT ALL THE OTHERS IN MY EBAY STORE SHIPPING POLICY: I SHIP WITHIN 24 HOURS OF PAID PURCHASE EXCLUDING WEEKENDS AND HOLIDAYS PAY PAL ONLY USA SALES ONLY RETURNS ARE ACCEPTED WITH A 10% RESTOCKING FEE BUYERS PAYS RETURN SHIPPING 14 DAY RETURNS ONLY AND ITEM MUST BE RETURNED IN THE SAME CONDITION IT WAS RECEIVED WE CLAIM NO RESPONSIBILITY FOR LOST OR DAMAGED ITEMS DUE TO THE USPS ALL ORDERS CAN BE TRACKED BY THE TRACKING#LISTED FROM YOUR PURCHASE WE ONLY SHIP THROUGH EBAY FOR BETTER TRACKING OF THE PACKAGES PLEASE CONTACT US BEFORE LEAVING FEEDBACK WE STRIVE TO RESOLVE ANY ISSUES YOU MIGHT HAVE IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME THRU EBAY I RESPOND WITHIN 24 HOURS
|
|
|
shaper molder 2" cut length corrugated head 1-1/4" bore with 3 sets of knives
head is 4" in diameter.2" tall.1 1/4" bore.comes with three sets of knives two have templates for sharpning.all knives are very sharp.never sharpned.head is corrugated as are the knives i think they are 16/60.steel head as u can see by the surface rust.
|
|
|
Freeborn Tools custom shaper head for solid surface coved back splash,1" spindle
I had this custom cutter made specifically for cutting solid surface cove back splash prior to gluing onto deck. The flat center section means that the glue line is also cleaned up. Reducing finishing time. The use of this cutter made made cove back splash a breeze and meant my expensive cove router had to do very little work. I could also go years on the cove router bits(95.00 each) This shaper head paid for itself on the first 100' of back splash.
|
|
|
LEITZ spindle moulder shaper molder cutter head
LEITZ 165139198 WE 500-1-50
|
|
|
LEUCO spindle moulder shaper molder cutter head
LEUCO 021-S19 167 967
|
|
|
Bridgeport Shaper shaping head attachment mill milling with tooling
Bridgeport Shaping head attachment. Model E shaper head. 220 volt 3 phase. Comes with 8 pc shaper tooling package which is new. best value on market. Unit works perfect see video" We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1447aac7347-0xec-
|
|
|
wood shaper carbide insert head 46mm bore x 40mm height
this was used on shaper to create the end cope on the rail for cope and stick or style and rail cabinet doors. Have the other one for molder on another auction, have the insert tooling in another auction, dimensions for this head are 46mm bore x 40 mm height, sold as is no returns thanks for looking 25.00 to ship
|
|
|
Delta Rockwell Shaper Cutter moulding cutter head # 43-343 and 31 Bits
There are 31 sets of bits with this cutter set. Look at the pictures for what is in clouded I will not be shipping the board with this sale Posted with
|
|
|
Delta Rockwell Shaper Cutter moulding cutter head # 43-343 and 10 Bits
There are 10 sets of bits with this cutter set. Look at the pictures for what is included I will not be shipping the board with this sale. There are spacers and other cutter included in this auction Posted with eBay Mobile.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144a022cfdf-0x105-
|
|
|
Vintage Dewalt tool # 6480 two knife shaper head 5/8" arbor hole carpenter too
Nice tool! I believe it has never been used. Just a tad bit surface rust.low starting bid with no reserve.Goodluck USA shipping only Thankyou
|
|
|
RVS MOULDING / SHAPER HEAD WITH 11 SETS OF CUTTERS - SWISS MADE FLURY SYSTEMS
LISTINGS: Most all the tools I am listing are'fresh' to the market in that I have found them through'picking' Or at antique stores, flea markets etc over the past 25 years. I will be listing a significant number of excellent tools(and the odd non tool! over the next few months. I am really thinning out my tool collection. Items will include many quality tools including patent items, planes, chisels, saws, braces, rules, levels, squares, pieces of ox bone, whalebone or ivorey and many others. Condition will be described, but items are in uncleaned'as found' condition unless indicated otherwise. Please see all my other listings. SHIPPING: My goal is to provide the best price possible so expedited s hipping to the US will be calculated from the Postal website and a $2 per item packaging and handling fee will be included ... morein the shipping amount. I will ship overseas so for Canadian and overseas buyers prices will vary according to where you are so contact me if you need a quote. If requested before the auction end I will quote alternate(overseas. Combined etc) mailing price options. I will combine shipping on multiple purchases in order to give you the best price possible. Email any questions. INVOICE& PAYMENT: I have a small handling fee of $2 per item(included in shipping cos t- see above) to offset packaging and fuel costs. Again. Email me with any questions. NB: I have listed on Ebay since 1998 with impeccable feedback. So please bid with utmost confidence. Thank you. WHALEBONE SCRAPER Over the next few days I am listing dozens of very interesting tools including Jon Walters Stanley book. An excellent Stanley#1 plane, mint Stanley trammel points NIB, a Berg chisel set, patented planes, rare squares, three superb Starrett cast iron levels, Davis levels set etc etc. I will combine shipping to give you the best price possible(see shipping info above) RVS MOULDING/ SHAPER HEAD WITH 11 SETS OF CUTTERS- SWISS MADE FLURY SYSTEMS. Cutter head is 3 3/4" across with a 30 mm opening and cutte
|
|
|
Shaper Spiral Cutter Head 4" Diameter
Grizzly 4" shaper cutter. Used excellent condition. ww.grizzly.com/products/H2876 Description Spiral cutterheads reduce tearout and leave a finish that is second-to-none. Our Spiral Cutterheads have 9 spirals. Which results in an incredible finish in even the most highly figured woods! Each indexable solid-carbide insert has 4 cutting edges, so you essentially get 4 cutters for the price of one. This results in a huge savings over conventional carbide cutters with both decreased replacement cost and minimized down time. If any of the inserts get chipped or become dull, simply rotate them 90° for a fresh, sharp cutting edge! The solid carbide inserts we use are extra thick and heavy-duty. Diameter: 4" Bore: 1-1/4" Height: 3-1/8" Number of Inserts: 33 Comes with follower bearing and 1" reducing bushings. Paypal ... moreonly. Free Shipping Continental US Only!
|
|
|
LOCK MITRE SHAPER MOLDING HEAD BIG AND SHARP
HERE WE HAVE A LOCK MITRE SHAPER MOLDING HEAD USED BUT SHARP. BIG THREE WING SIX INCHES DIAMETER BORE IS ONE INCH AND QUARTER WITH BUSHING DOWN TO THREE QUARTER. 1-7/8 INCHES THICK WITH BUSHINGS INSTALLED VERY THICK CARBIDE 1/8" + WEIGHS IN AT 3LB-13OZ ANY QUESTIONS WILL BE ANSWERED QUICKLY I WILL SHIP IN A SMALL PRIORITY SMALL FLAT RATE BOX COST YEARS AGO WAS OVER 350.00 FOR THIS CUTTER
|
|
|
RAISED PANEL MOLDING HEAD FOR SHAPER
RAISED PANEL MOLDING HEAD MFG BY L.H.R. ENTERPRISES INC NUMBER 1041. BORE,ONE AND ONE QUARTER INCHES WITH BUSHINGS DOWN TO ONE INCH AND DOWN TO THREE QUARTERS CHOICE OF THREE SPINDLE SIZES. NOT DULL BUT MAY NEED TOUCHED UP BEFORE SERIOUS USE. IT IS SIX INCHES IN DIAMETER PLEASE ASK ME QUESTIONS IF NEEDED I WILL SHIP THIS CUTTER IN SMALL PRIORITY FLAT RATE BOX
|
|
|
122x60mm x 1 1/4"(bore) corrugated shaper cutter molder head plus knives and spa
Shaper Cutter Molder head for sale. It is used but still perfectly functional. blades are pretty sharp! downsides: there are a couple of slightly dull burn spots on part of one set of knifes(can be sharpened) And there are 4 of the 8 knife set screws missing and collars are missing set screws as well(not a big deal, your local hardware store should have some for a few bucks) the 1 1/4" to 1" adapter is kind of stuck in the bore. I didn't try very hard to get it out though. a little WD and a tap or two should get it out. what you see in the pictures is what you get: extra set of bull nose knifes included. Collars shims and nut included. spacers and adapters included as well. imprinted writing says: nbis 9000 mech vorschub 60deg Leitz Nr. 599 122 x 60 x 1 1/4
|
|
|
Pair Stark MP140/ 40 Universal shaper cutter molder multi profile insert head
Pair Stark MP140/ 40 Universal shaper cutter molder multi profile insert head. Both are in used condition. Please check out all the photos. Selling As Is with No Reserve. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144dcb9e1d5-0x103-
|
|
|
Carolina Specialty Tool Universal shaper cutter molder multi insert head EC2018M
Carolina Specialty Tool Universal shaper cutter molder multi profile insert head. Used condition. Please check out all the photos. Looks like a# EC2018M. Selling As Is with No Reserve. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144dd6deaa3-0x10e-
|
|
|
Dewalt Shaper Head Fits 5/8" Arbor For Edge/Surface Shaping #T/R6480 W/blades
Very Light Use. Dewalt Shaper Head Fits 5/8" Arbor For Edge/Surface Shaping with Radial& Bench Saws with 2-knives. T/R6480 Please take a look at all pictures. What you see in the pictures is what you will receive. I am not a expert in the metalworking/milling/machining industry. But we do my best to describe the item I'm selling and the condition that it's in. Parts are listed with part numbers when available- please do your research before bidding. CHECK MY OTHER LISTING FOR MORE TOOLS AND AUTO-PARTS! Thank You.
|
|
|
POWR-KRAFT SHAPER MOLDING HEAD: 5/8 ARBOR SIZE. IOB.
PLEASE READ TERMS BELOW BEFORE BIDDING! UP FOR SALE IS: OLD STOCK: SHAPER MOLDING HEAD: 5/8 ARBOR SIZE. MADE BY POWR-KRAFT( MONTGOMERY WARD BRAND) WITH 3 KNIVES. MOLDING HEAD IN ORIGINAL BOX. LOOK LIKE UNUSED. ANYWAY SALE AS USED! ARBOR SIZE: 5/8" DISK 3 3/4" DIA. X 7/8" T KNIFE: 1" WIDE ALL PICTURES SHOWN FOR DETAILS.PLEASE TAKE LOOK IT BEFORE BID! ALWAYS CHECK FOR REVISIONS TO DESCRIPTION
|
|
|
Ø5-7/8" DML 730153 Four Pocket Moulder / Shaper Head 6" Length, 1-13-16 Bore
5-7/8" Moulder Diameter 8-1/2" Overall Diameter 6" Moulder Length 6-5/8" Overall Length 1- 13/16" Bore I HAVE MANY OTHER MOULDER HEADS IN STOCK. FEEL FREE TO CONTACT ME FOR OTHERS NEEDED. SEE MY OTHER LISTINGS FOR MORE GREAT VALUES.
|
|
|
VINTAGE CRAFTSMAN MOLDING MOULDING HEAD CUTTER SETS TABLE SAW SHAPER RADIAL ARM
DESCRIPTION: USED. MIGHT BE NEW, 3 KNIFE MOLDING CUTTER SETS. THE AUCTION IS FOR ALL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY
|
|
|
Shaper head, 4 inch diameter, wit 3 knives, vintage________2900/5
shaper head 4 inch diameter 7/8 inch thick 5/8 inch diameter of shaft has 3 knives 5/32 inch thick 1 inch wide based on patent search it is likely a Delta product Made in USA we use recycled materials for packing combine shipping check my other listings international bidders; e-mail me for shipping quote before bidding. And pay after You receive invoice absolutely not responsible for foreign country customs: retards. Detains, lags, tardiness, delays, and slow downs buyer is responsible for all duty and customs fees
|
|
|
Delta Rockwell Heavy Duty Moulding Cutting Head Cutter Set Shaper Vintage Case
This is great vintage Moulding Cutter set by Delta Rockwell in its original case. Cutter has a 4" diameter body with the set screws to fasten the 3 cutting blades 1/2" spindle hole 6 different cutter sets: 35-102 35-103 35-196 35-197 35-208 35-221 Includes the allen tool to fasten the blades. Used. But very nice condition, ALL blades are clean, sharp, unmolested, no chips or damage. The plastic case displays the classic Delta Rockwell logos. Cool Nostalgic Quality Woodworking Power Tool from Milwaukee. Wisconsin- how they should be made! Thank you for your interest!
|
|
|
Bridgeport Shaper Head Adapter
I have a adapter for mounting a shaper head or another mill head on your Bridgeport mill.
|
|
|
Shaper Collar Set - Safety Head
Vintage"Jet" Safety Collar Set- 2-1/4" Plain Collars- 1/2" bore- excellent
|
|
|
Delta Milwaukee, Rockwell Moulding, shaper, Head and bits, 4 SETS VINTAGE BLADES
JUDGE FOR YOURSELF THESE HAVE BEEN SETTING AROUND FOR 50 PLUS YEARS AND NEED TO BE PUT TO WORK OR COLLECTED
|
|
|
Grizzly C2169 Entry Door Shaper Cutter Head Set
Grizzly C2169 Entry Door Shaper Cutter Head Set Up for auction is a door shaper cutter set. They have wear and tear from previous use. They are ready for every day use. NO INTERNATIONAL SHIPPING. WE ONLY SHIP TO U.S. ADDRESSES! RETURNS ACCEPTED ON ITEMS. THAT ARE DEFECTIVE OR DESCRIBED INCORRECTLY! FEEL FREE TO MESSAGE ME IF YOU HAVE ANY QUESTIONS MON-FRI! PLEASE REVIEW PICTURES FOR MORE ON PHYSICAL CONDITION AND INCLUDED ACCESSORIES. 04/07/2014(OS) I-44(P2)
|
|
|
HEAD SCI SUPER SHAPER MISURA 160 + ATTACCO SP 130
WWW.SPORTSPRINT.IT tel. 0571/537369 fax 0571/537370 francesco@sportsprint.it MARCA: HEAD MODELLO: SUPER SHAPE ATTACCO: SP 130 ANNO: 2011/2012 USATO Velocità Sostenuta Capacità Esperti Terreno Piste tracciate Stile Tecnica molto buona Lengths 160 Radius 10.7 Misure: 120- 65- 105. CONDIZIONI: NOSTRO SCI TEST UTILIZZATO DUE STAGIONI. COMPLETAMENTE RICONDIZIONATO PER QUANTO RIGUARDA LAMINE SOLETTA E SCIOLINA. NORMALI GRAFFI SULLA PARTE SUPERIORE SERIGRAFATA. RICHIEDETE ULTERIORI FOTOGRAFIE ALL'INDIRIZZO: francesco@sportsprint.it SAREMO LIETI DI MANDARVELE. COMPRESO NEL PREZZO REGOLAZIONE ATTACCHI A NORMA ISO PER MEZZO DI MACCHINA A CONTROLLO ELETTRONICO. CON RILASCIO DI CERTIFICAZIONE CHE NE COMPROVA IL PERFETTO FUNZIONAMENTO. SPEDIZIONE: A MEZZO CORRIERE. CONSEGNA IN 24/72 ORE- PRIORITARIA ENTRO 24 ORE(RICHIEDERE PREVENTIVO) PAGAMENTO: ... moreVAGLIA POSTALE- BONIFICO BANCARIO- CARTA DI CREDITO- PAYPAL- CONTRASSEGNO(€ 5.00) RICHIEDERE ULTERIORI FOTO VIA MAIL VENITE A VISITARE IL NOSTRO. TANTISSIME OCCASIONI VI ASPETTANO!
|
|
|
Schmidt Tool Shaper Head Corrugated Cutter
Schmidt Corrugated knife head. 3" tall with a 3/4" bore. 2 3/4" diameter. This head as seen almost no use. Comes with two straight knives which have never been used. Very high quality tooling from NJ. Happy to answer questions More info an retail price at; http:www.cggschmidt.com/store/proddetail.php?prod=MH223P6 Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145583cdde8-0x116-
|
|
|
euro shaper head & knives, 3/4 bore
euro head 130x48x3/4 takes 60 mm knives. 4 sets included, solid steel, runs fine
|
|
|
Craftsman 7" Shaper Head & 6 Sets Cutters Table Radial Saw COMPLETE
Craftsman 7" 3 Bit Molding Shaper Head& 6 Sets Cutters This Molding cutter bit set is"old" Classic"Craftsman Vintage" and complete. Look at the"Craftsman" symbol on the blade portion of this set. It is the vintage crown around the Craftsman wording.SPECTACULAR! It has everything you need to make moldings in the(6) patterns of cutter shown. It was used a few times. But is in good condition for its age. Model No. 9-3200 in original plastic case with cutters and allen wrench. Sorry no instructions sheet. Thanks for Looking
|
|
|
Smooth Edge Not Lockedge Shaper Head. Versitile Cutterhead. 1 1/4" Bore.
Unknown mfg head. The spindle nut compresses the two sides together to clamp the knives in place. One side has a rub bearing built in with a spring ball for greasing. Bearing makes some noise and may be dry or worn. Apparently DOES NOT use the adjustable worm gear locking edge knives. I have some lockedge knives posted for sale as well. Please consult an expert before using this if you are unfamiliar with this type of cutterhead. Will combine shipping. Posted with eBay Mobile
|
|
|
Grey Unknown Brand Shaper Or Moulder Head. Bore 35mm 5" Wide By 2" Tall
Unknown mfg head. Body is 5" diameter and thickness is 2" but bore is right at 35 mm. Take a close look. Because I don't know anything about it. Low starting bid. Will combine shipping. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14590a6016d-0x117-
|
|
|
Shaper Cutter Head 1 1/4" Bore 3"Tall 4" Diam Great Shape. Leitz Wm 501-2-02
Nice condition Unknown brand head. 1 1/4" bore. Marked 100x80x30 but bore is now 1 1/4" 15000 max rpm Will combine shipping. Posted with eBay Mobile.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14592c839e2-0x113-
|
|
|
CG Schmidt 5"h Corrugated Shaper Head
I'm offering this CG Schmidt corrugated shaper head. It is a 5" tall. By 4" diameter head with 1-1/4" bore. It's in good overall shape though is missing one gib screw easily replaced through CG Schmidt. Other than that it is ready to work, this is part of a selection of items I'm selling in advance of moving my shop. These are selling new for roughly $260! thanks for looking!
|
|
|
13 Sets Molding Head Cutter Blades Knives Planer Shaper fit Craftsman FREE SHIP
13 SETS of 3 Molding Cutters These knives were purchased from the estate of a gentleman who was very partial to Craftsman tools. There was a Craftsman shaper. Joiner and planer at the sale and I assume that these cutters fit the Craftsman tools. There is no name or model# on the blades themselves. Some of the cutters have been used but are in Very Good used condition. Most appear to be new. All measure 1" wide and all but 2 sets have a 1/4" hole to accommodate the retaining bolt. There are 2 sets with no hole. GREAT ASSORTMENT PAYMENT Payment is due immediately for all“ Buy it Now” sales and within 2 days of the end of all on- line auctions. The eBay Office Assistant has been set to automatically open an“Unpaid Item” case 2 days after the end of the auction if payment has not been received. If there is any reason you cannot comply ... morewith the above terms. Such as a cash transaction for a local pick up or an unanticipated payment delay, please contact us ASAP and make us aware of your situation. SHIPPING Domestic shipping is FREE. This charge covers both the shipping cost as well as the cost of packaging and materials. The package will ship USPS Priority Mail. USPS Parcel Post. Fed Ex Ground or UPS Ground within 2 business days of receipt of payment. We are happy to offer Consolidated Shipping rates whenever possible. Please contact us and let us know which items you are interested in and what you Zip Code is so we can provide you with the reduced cost and arrange invoicing for the purchase. We welcome International buyers for all items that do not present shipping or customs challenges. We understand that International shipping costs are high and do not add any additional handling charges to International orders. International buyers please review calculated shipping costs prior to ordering. RETURNS We do our best to provide eBay buyers accurate descriptions and photographs and encourage you to ask questions prior to bidding on or purchasing an item. If you are not satisfied with your item after receiving
|
|
|
Moulder/Shaper Head For Corrugated Insert Knives
It measures 2-1/2" x 4-3/4" for 1-1/2" Arbor with sleeves to 1-1/4"
|
|
|
Wisconsin Knife Works Wood Moulder Shaper Cutter Head / Molder Head HR5917
A Wood Moulder Cutter Head. This side head was used on a Mattison 276- 4 head- wood molder for high speed production cut molding. 6 knife head for a smooth cut. 6" wide. 2 1/4" thick, and 1 13/16" arbor. Complete and ready to go, with reversible collet.Also work on a Wenig, Diehi, Leader Mac, and others with same arbor size. Made by Wisconsin Knife Works in good condition, with knives. Thanks for looking. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146225f465d-0x112-
|
|
|
4 3/4"" Diameter Mech. Varschub Weinig Molder Cutter Shaper Head
4 3/4" Diameter Mech. Varschub Weinig Molder Cutter Shaper Head I bought these at an estate sale for a wood working shop. The ID is 1.544" ~39 mm) on my micrometer. Check my other auctions for additional woodworking equipment. I do my best to describe the items. But I am not an expert. Please look at the pictures and ask if you have any questions. My goal is 100% satisfaction. Please contact me if you purchase the item you have any problems. Check out my other auctions. I will combine shipping on multiple purchases whenever possible.
|
|
|
7" OD, ~2.25" ID, Cutter,Molder,Shaper Head, Marked "Double 1/2 T&G" on Box
7" Outside Diameter. ~2.25" ID, Cutter Head, Marked"Double 1/2 T&G" on Box I know this is a cutter/molder head. There are no markings on it. I hope someone recognizes it. I bought this at an estate sale for a wood working shop so I do not know the history. I do my best to describe the items. But I am not an expert. Please look at the pictures and ask if you have any questions. My goal is 100% satisfaction. Please contact me if you purchase the item you have any problems. Check out my other auctions. I will combine shipping on multiple purchases whenever possible.
|
|
|
~6.5" Dia x ~4" 6 blade cutter, molder, shaper head, ~2.75" ID with 1.75" ID Sle
~6.5" Dia x ~4" Tall 6 blade cutter. Molder, shaper head, ~2.75" ID with 1.75" ID Removable Sleeve and removable blades. I know this is a cutter/molder head. The only marking on it is 75398. I hope someone recognizes it. I bought this at an estate sale for a wood working shop so I do not know the history. This weighs almost 32 pounds. I do my best to describe the items. But I am not an expert. Please look at the pictures and ask if you have any questions. My goal is 100% satisfaction. Please contact me if you purchase the item you have any problems. Check out my other auctions. I will combine shipping on multiple purchases whenever possible.
|
|
|
4 3/4" Diameter DML 20 Deg 723725 Molder Cutter Shaper Head
4 3/4" Diameter DML 20 Deg 723725 Molder Cutter Shaper Head I bought this at an estate sale for a wood working shop so I do not know the history. I listed it as used. But it looks almost new. The id is ~1.8" 46 mm) by my micrometer. Check my other auctions for additional woodworking equipment. I do my best to describe the items. But I am not an expert. Please look at the pictures and ask if you have any questions. My goal is 100% satisfaction. Please contact me if you purchase the item you have any problems. Check out my other auctions. I will combine shipping on multiple purchases whenever possible.
|
|
|
Large Metal Shaper Head & Clapper
Unknown shaper head. Moving parts are kinda tight. They do move when tapped with a hammer. Screw works fine. Mounting holes are 5 1/2" center to center. Ruler in pic is 18" long. Hope someone out there can use it!
|
|
|
Molder or Shaper Head---Roundover Carbide---1 9/16 Bore---2" Blade---8" Diameter
Scroll down to see all the information on the item. We take many pictures of the labels. Condition, size, so that you know what you are getting and so that you can research more before you purchase. We respond to emails within 24 hours if you have a question. Launched from my store- Powered by inkFrog Analytics.
|
|
|
Large shaper molder Cutter Head 1 13/16" bore 4" tall 6 3/8" dia. W/ Hydrolock
For Sale: Large shaper. Molder cutter head In good shape. Still very sharp. 4" tall 6 3/8" outter diameter. 1 13/16" bore Also has included with hydrolock Has 8 knives on the cutter Please take a good look at the pictures for cutting pattern. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the ... morecrate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to
|
|
|
WKW 2Z shaper molder 2" cut length 16/60 corrugated head 10 hook 1-1/4" bore
Your tool will arrive ready for production or properly protected to store for that unique job. 2 knife corrugated back shaper head 10 degree hook 2" Cut Length 4" diameter oellasawandtool.com 10 degree hook diameter- 4" cutting edge length- 2" gibbs and screws in good condition some comestic marks 1-1/4" bore balanced 7/8" deep pocket can run 1/4" 5/16" 6-8mm) corrugated back steel 1 6-60 degree corrugations Made in USA shipping weight 6 lbs Open Box Program. F.A.Q. 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for our international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound ... morelimit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and want an open box, its best to email right away, even before your payment. flat rate box postage rates(insurance is strongly recommended and is extra) USA including Puerto Rico $10.35 up to 70lbs Canadian and Mexico $25.95 up to 20lbs* UK. Europe, Asia and Australia $41.95 up to 20lbs* International buyers please note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your c
|
|
|
Shaper Cutter 1 1/4" Bore 1 1/2" High 4 1/2" Dia Moulder Cutter Head
Can not tell if it is new or resharpened.
|
|
|
Top pulley/belt cover (Bridgeport) shaper head
Bridgeport Shaper Head top belt/pulley cover. Part is in good useable condition.It needs a little cleaning it be nice.Has been painted and is flaking off.
|
|
|
Bridgeport shaper head housing
Item pictured on right w/o adj. slide. Includes drive haft and worm gear. No adj.slide.
|
|
|
Bridgeport shaper head stroke adj. housing
This is the piic. on left. Stroke adj housing with drive shaft and worm gear. Also includes stroke adj. slide.
|
|
|
Bridgeport Shaper Head Motor
Motor and step pulley for Bridgeport shaper head.1/3 hp 220-440 3 ph. Motor is set up on 220 3 ph.Tested and runs fine. Has push button on/off switch mounted on motor. Plug is no longer on cord,removed to test and discarded.
|
|
|
Older Dewalt 2 Knife Shaper Cutter Head 6480 & Jointing Panel Raising Knives
Older Dewalt 2 Knife Shaper Cutter Head 6480& Jointing. Surfacing and Panel Raising Knives 6477 with a 5/8" opening. This may have been used at one time, in condition as shown. Please see the other cutters I have listed. Important Note: Items shown are out of an estate sale and may have been restored or cleaned at some point during their life. What you see is just as I obtained them and are meant for collectors or tool users who understand that these tools are many years old and may need some restoration prior to use. SALE TERMS: Payment due within 3 days after the end of the auction. Paypal only. The items being offered in this auction are in"as found" condition from local estate sales. All pieces are sold"AS IS" Since I sell many older items. And it is hard to describe every imperfection, scratch or scuff, I ... morewill do the best that I can in my descriptions and offer any further information or pictures you may require via email. I am not expert in many of the items that I sell, so please ask questions so you get exactly what you are expecting. Returns are accepted under certain conditions. I try to be as accurate as possible in my descriptions. If I make a mistake, I will do the best that I can to correct it. Depending on the amount of packing required, a handling charge up to $1.00 may be added. I do this as a hobby, not as a business, and I may not always be available to answer questions quickly. Once your item has arrived, please post positive feedback and I will know your item has arrived safely and you are a satisfied buyer. Shipping weight is 2lbs. I use the post office for shipping. And will ship only within the USA. No pick up please. Multiple winning auctions can be combined for reduced shipping costs.
|
|
|
Innomed Surgical Femoral Head Bone Shaper Shaver Orthopedic Drill Bits Cutters
Innomed Inc20 Femoral Head Shaper Set Sterilization Case Included For sale is a set of Innomed Femoral Head Shapers. These cutters are stainless steel and range in size from 40 trough 70. The set is complete minus the extension. You will receive the following femoral shapers and the case: Innomed Inc part numbers: 5450-40 5450-44 5450-48 5450-52 5450-56 5450-60 5450-64 5450-70 Condition Technician reports the instruments are in excellent condition with no broken or bent cutting edges. All the shafts are straight and not chipped. The case locks tight for sterilization. You will receive all the instruments pictured in the description. Warranty We test all our equipment to the best of our ability and our technicians accurately report their findings. We guarantee all our equipment to be exactly as described. You will receive the actual item pictured. ... moreWarranty covers damaged. Defective or items not as described. Age Unknown Dimensions 18” x 10” x 4” Weight: 8lbs total Shipping Varies by location Legal Disclaimer Anyone can bid/buy but it is a blanket requirement by Ebay that I post the following disclaimer on all medical category auctions.The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Medical Supply Company 959 W Desert Sky Drive San Tan Valley AZ 85143 We do our best to test everything and make sure it is working. We will state the results of the test in the description. Some items are not able to be tested due to power requirements and the availability of equipment. The scope of our warranty is“Item as described in description” Or defective/ damaged equipment. Calibration and maintenance are the buyers responsibility.
|
|
|
#6 Mattison ~6" Dia Molder Cutter Shaper Head
6 Mattison ~6" Dia Molder Cutter Shaper Head MH0436. 21428 The cutter is ~3" Thick I bought this at an estate sale for a wood working shop so I do not know the history. Check my other auctions for additional woodworking equipment. I do my best to describe the items. But I am not an expert. Please look at the pictures and ask if you have any questions. My goal is 100% satisfaction. Please contact me if you purchase the item you have any problems. Check out my other auctions. I will combine shipping on multiple purchases whenever possible.
|
|
|
#8 ~6" Dia Weinig Molder Cutter Shaper Head ~9" Long
8 ~6" Dia Weinig Molder Cutter Shaper Head ~9" Long ~1 7/8" Hole No blades or blade holders I bought this at an estate sale for a wood working shop so I do not know the history. Check my other auctions for additional woodworking equipment. I do my best to describe the items. But I am not an expert. Please look at the pictures and ask if you have any questions. My goal is 100% satisfaction. Please contact me if you purchase the item you have any problems. Check out my other auctions. I will combine shipping on multiple purchases whenever possible.
|
|
|
#7 ~6" Dia Mattison Molder Cutter Shaper Head ~6" Long
7 ~6" Dia Mattison Molder Cutter Shaper Head ~6" Long ~1.25" Hole MH081 Removable insert in the hole. Blades are chipped I bought this at an estate sale for a wood working shop so I do not know the history. Check my other auctions for additional woodworking equipment. I do my best to describe the items. But I am not an expert. Please look at the pictures and ask if you have any questions. My goal is 100% satisfaction. Please contact me if you purchase the item you have any problems. Check out my other auctions. I will combine shipping on multiple purchases whenever possible.
|
|
|
(2@)Bridgeport shaper head stroke adj. housings
This listing is for 2 Bridgeport shaper head stroke adj. housings. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146ee48bf61-0x10c-
|
|
|
Lot 151 Lock Edge Lockedge Shaper Head Versitile Cutterhead. 1 1/4" Bore
Unknown mfg head. 1 1/4" bore Uses adjustable worm gear locking edge knives of infinite variability. Unusual 3 knife system. Spindle nut clamps the two halves together and the knives can be dialed in with the screws built into the holder. I have some knives posted for sale as well. Please consult an expert before using this if you are unfamiliar with this type of cutterhead. Will combine shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-146ee514093-0x10b-
|
|
|
Fantastic Four (1961) #137 1st Print Shaper War-Head Mark Jewelers Buscema FN+
Welcome to Mustang Comics! We are new to ebay but we have been around the collecting world for awhile because we are the sister store of Duncanville Bookstore(ebay id: andymac2570 10.600+ positive feedbacks) When you buy something from us, you can expect the same great service as if you are buying from them. Item: Fantastic Four(1961) 137 Special Notes: This issue is a First Printing! This issue has a SCARCE Mark Jewelers insert. Which means this comic was sold only on a military base! We do not use stock photos! What you see in the pictures is what you will be getting. Writer: Gerry Conway. Interior Artist: John Buscema. Cover Artist: John Buscema. Condition: Fine +(6.5) Nice book. But a round stain on the back cover. Bagged and Boarded Shipping: US Priority Flat Rate Envelope: $5.50 US Media Mail: $3.50 Global Priority Flat Rate Envelope: ... more$24.50 We can only ship Global Priority Mail on International Shipments because it is the best way we can track your shipment. We will be happy to combine the shipping cost for multiple purchases. We can ship up to 12 comic books for the same rates as above. If you buy more than 12 comics. We can give you an exact shipping cost quote. Shipping& Payment Terms: If you would like to have your item insured. Please contact us and we will send you an invoice with the adjusted shipping charges. We will be happy to combine the shipping charge for multiple auction wins. If you win a single item, you do not have to wait for an invoice to make your payment. IF YOU WIN MULTIPLE AUCTIONS. PLEASE WAIT UNTIL WE SEND YOU A COMBINED INVOICE BEFORE PAYING FOR YOUR ITEMS. Please DO NOT pay for items separately. We will ship your items within 1 business days upon receiving your payment. Payment Options: PayPal is the preferred method of payment per ebay's policies. Payment MUST be received within 7 business days of the auction ending or your bid will be cancelled and ebay will be contacted. Questions: We will be happy to answer any questions you have about our items before the auction
|
|
|
BRAUN Cruzer5 Beard & Head 2 in1-Perfect Stubble trimer shaper Cruzer 6
WE PRIDE OURSELVES IN FAST SHIPPING AND GREAT SAVINGS $$$. Braun`s most powerful beard trimmer Powerful dual battery system that adjusts to tough beard conditions for an even trim Ultra sharp stainless steel trimming element for defined beard styles Adjustable beard comb with six settings for a perfect stubble or full beard look(1-11mm) Adjustable hair comb with six settings for precisely trimmed hairstyles(10-20mm) The Braun cruZer 6 beard&head is the most powerful Braun tool for styling your beard and head exactly the way you want. Boasting a dual-battery system for powerful trimming. The cruZer 6 beard&head also features remarkably long battery life. Its unique, sliding trimmer is perfect for styling hard-to-reach areas like the inside edges of your goatee. The trimmer also conveniently works when the comb is attached. Fully washable ... moredue to its sealed body, the cruZer 6 beard&head is a hassle-free and handy tool for easy styling and trimming. Clip beards and hair to 12 different lengths The provided beard comb lets you choose from 6 different length settings(1—11mm) Then. The hair comb offers 6 longer settings(10—20mm) helping you create a customized hairstyle. Both combs come with click&lock functionality, while the ultrasharp, stainless-steel trimming element allows for precise beard shaping with or without the comb attached. Create precise edges and customized shapes The small precision trimmer was specially designed for convenient beard styling. Even in hard-to-reach areas. Give your beard exact shapes and contours without having to stop to remove the comb. And the same goes for your hairstyle. Lines, patterns, it's up to you. Powerful dual-battery system that adjusts to all hair conditions The trimmer is equipped with a powerful dual-battery system that makes it easy to trim even tough beard hair. By keeping constant trimming power even in tough conditions. The cruZer 6 beard&head ensures an even trim without the risk of irregularities. Fully washable for easy cleaning The cruZer 6
|
|
|
SWIVEL HEAD METAL SHAPER or PLANER TOOL HOLDER hss bit ARMSTRONG USA Pat 1901
used swivel head tool holder BODY ONLY- NO HEAD Armstrong Bros USA Pat may 28 1901 swivel head is missing shank is approx 5/8" x 1 5/16" x 8" long please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
 |