|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Brand new No time wasted with shims All working parts hardened and precision ground Piston type tool post are precision engineered to assure ... morerepeatability accuracy Piston type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-100 Piston Type Tool Post Swing Dia 12".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-111 Wedge Type Tool Post Swing Dia 12".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to the lathe ... morecenter line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service Quality Assurance For Your Peace Of Mind Package List:.
Buy It Now
$16.53 Shipping Condition: For parts or not working Location: Hudson, United States It is rusty and seized. It will need to be lubed and cleaned. There was a Delta lathe and a craftsman lathe in the estate. I am not sure if it went to ... moreeither. See pictures for condition.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States We have collected all the information we've ever found on this scroll saw series into one book. This manual covers the following models, and more: 1440, ... more40-205, 40-406, 40-407, 40-409, 40-211, 40-213, 40-416, 40-417, 40-419, 40-203, 40-207, 40-441, 40-442, 40-444, 40-305, 40-306, 40-311, 40-313, 40-440 ,and 40-400.
Buy It Now
$17.80 Shipping Condition: New Location: Saint Charles, United States 11/16" Retrofit GTN2 Cut-Off and Grooving Blades202-9576 11/16" Retrofit GTN3 Cut-Off and Grooving Blades 202-9577. Certificate for each batch. LATHE ... moreSWING 10-15. Lathe swing: 10" -15". Made of high quality Alloy tool steel 40Gr which is forged and has longer life,not Aluminum.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 5140066-25. This is the drive belt for the Delta Midi lathe, 46-455 type 1.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This is a reproduction, not a photocopy, of an original Delta Getting the Most Out of Your Circular Saw and Jointer book. GETTING THE MOST OUT OF YOUR ... moreCIRCULAR SAW AND JOINTER. Saw Blade, Paper Patterns, Crosscut Saw, Planer Saw, Rip Saw, Combination Saw, Filing Vise.
Buy It Now
Free Shipping Condition: New – Open box Location: Goddard, United States Delta 12" Gap Bed Wood Lathe 46-221, 46-222, 46-223, 46-224, 46-541, 46-542, 46-543, 46-544, 46-612, & 46-613. It also contains a parts breakdown for ... morethe 46-840 Turning Duplicator. It contains 28 pages.
Buy It Now
$3.97 Shipping Condition: Used Location: Houston, United States Lathe 46-525 Instruction Maintenance Parts Manual. Not for a COLLECTOR.
Buy It Now
$10.40 Shipping Condition: Used Location: Cheswick, United States ROCKWELL 14" LATHE HALF NUTS.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This is a reproduction, not a photocopy, of an original Delta 12" Gap Bed Wood Lathes Instruction and Parts Manual. This manual covers the variable speed ... moremodels: 46-541, 46-542, 46-543, 46-544, 46-545, 46-525, and four speed models: 46-200, 46-201, 46-203, 46-221, 46-222, 46-223, 46-224.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment： Brand New Suitable For Lathe Center Height 0.7 - 2.2" (top Compound Surface To Lathe Center Line) , Such As: South Bend 13" , 14" & 1307 , Delta ... more14" , Logan 14" Emco: Elnomat13s , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 Series, Monarch: 13 , Nardini: Ms1400 Ms1600 Acer: 1340 And Many Other Import Lathes. This Wedge Type Tool Post Is Precision Engineered To Assure Repetitive Accuracy Wedge Type Tool Posts Have The Maximum Ridigity To Get The Chatter Free Performance No Time Wasted With Shims All Working Parts Hardened And Precision Ground Description：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description： Brand new. No time wasted with shims. All working parts hardened and precision ground. Piston type tool post are precision engineered to ... moreassure repeatability accuracy. Piston type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. .
Buy It Now
$12.00 Shipping Condition: New Location: Schaumburg, United States Whole set includes one each of: (Total 6PC ). All working parts hardened and precision ground. 250-202 Boring,Turning Tool Holder, use tool bit up to ... more5/8" and round shank tool bits up to 1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
$12.99 Shipping Condition: Used Location: Spring Grove, United States
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Untitled Document Free. Fast Shipping Every Business Day! Delta Getting the Most Out of Your Drill Press Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 48. Printed 5.5" x 8.5" This is a reproduction. Not a photocopy, of an original Delta Getting the Most Out of Your Drill Press book. This is a complete handbook covering all the branches of drill press operation in the home workshop with over two hundred photographic illustrations and line drawings. Please see index below. One reason that I've reprinted some of these older books is because they have a lot of information with illustrations that get directly to the point. Other books in this series that I have in my eBay Store: GETTING THE MOST OUT OF YOUR LATHE• GETTING THE MOST OUT OF YOUR SHAPER• GETTING THE MOST OUT OF YOUR CIRCULAR SAW AND JOINTER• GETTING THE MOST OUT OF YOUR ABRASIVE TOOLS• GETTING THE MOST OUT OF YOUR BAND SAW AND SCROLL SAW. Requires Adobe Acrobat) Index CHAPTER ONE—THE DRILL PRESS. Construction—Size—Power and Speed—Spindles—Inserting Spindle—Belt Tension— Inserting Drills—Centering Table—Adjusting Spindle Return Spring—Tilting Table.4-7 CHAPTER TWO—LAYING OUT THE WORK. Laying Out Necessary—The Combination Square—Hermaphrodite Calipers—Mark- ing—Examples of Layout—Laying Out Dowel Holes—Surface Gage—Punches.8-10 CHAPTER THREE—WOOD BITS. Names of Parts—Common Styles of Wood Bits—Screw and Brad Points—Conditioning— Other Bit Styles—Plug Cutters—Mortising Bits and Chisels—Twist Drills for Wood—Sanding Drums—Grinding Wheels.11-13 CHAPTER FOUR—DRILLING PRACTICE IN WOOD. Speed—Boring a Hole—Boring Holes at an Angle—Boring Holes to Depth—Boring Holes in Series—Holes in Round Work—Use of Pivot Pin—Boring Deep Holes— Boring Large Holes—Drilling Screw Holes—Countersinking—Boring Mortises— Cutting Dowels—Boring Dowel Holes—Fitting Dowels.14-19 CHAPTER FIVE—TWIST DRILLS. Twist Drills—Point Angle—Lip Clearance—How to Grind—Web
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States LOOK AT THE PICTURES. NO WARRANTIES GIVEN OR IMPLIED.
Buy It Now
$68.80 Shipping Condition: New Location: Oxford, United States Generic riser block kit machined to fit the Delta 14" bandsaw with a 15/16" round guide post that inserts into either the round or hex upper ... moreguide bracket hexagon on the lower end. It has a flat milled on one side for the height adjusting screw to bear on and to align the upper guide bracket. Increases resaw capacity from 6" to 12" resaw. Requires 105" long blades. one included) See my other listing for the kit with hex post for saws with hex guide post hole in upper arm. Includes: Cast iron riser block with Delta pattern dowel pins machined and inserted-Longer 15/16" round post for guide-Longer bolt-Extended front blade guard-Extended column blade guard-105" X 3/8" blade-Instructions are in photo section of this listing MEASURE YOUR EXISTING POST BEFORE ORDERING! SOME USED 15/16"and some 1" Exchange of post for 1" after purchase and delivery is $25 Satisfied customers report on this hard to find item: shipped promptly. Exactly as described. Perfect condition on arrival! thanks! See my other listings for Delta bandsaw parts: Top side guide bracket item: 150964738129-Guide bearings item: 110901408726-Wheel bearings and guides: 150654192974-Delta Rockwell 14" Bandsaw table taper pin Delta part# LBS-55 Item 150916012600-14" Bandsaw Trunnion Shoe Delta part# 426-02-027-0001 band saw item: 110901644826-Bandsaw table insert Fits Delta 14" Part# 426-02-063-0001 item: 110996429828-14" Delta Rockwell Jet Grizzly Bandsaw Tire 426010940001 item: 110991699776-14" Urethane Delta Rockwell Jet Grizzly Bandsaw Tire item: 150967827083-Delta or import 14" bandsaw rear trunnion 426-02-0-950-002S or LBS-60 Item: 150974016667- 14" Delta Rockwell Bandsaw.1370" THE Thickest Tire Heavy Duty 426010940001 ITEM: 110993116089-Delta or import 14" bandsaw Front trunnion 426 023 950 005 or LBS-60-s w/scale Item:150974039522-Delta 14" Bandsaw Upper wheel Shaft& Hinge 426-02-059-0001 ITEM: 150975435851 Rebuild kit for Delta and other 14&q
Buy It Now
$18.80 Shipping Condition: Used Location: Saint Paris, United States This auction is for a pair of tool Rests 1 DDL 12" and a DDL4" both in great shape. Check the pictures and ask any questions before bidding.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description?? Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
Buy It Now
$10.50 Shipping Condition: Used Location: Miller Place, United States HAS A 2 MORSE TO A JACOBS 6. WITH 3/8-16 THREADED END, CHUCK LOOKS EXCELLENT, JAWS ARE IN VERY GOOD CONDITION AS CAN BE SEEN IN PIC’S.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Untitled Document Free. Fast Shipping Every Business Day! Delta-Milwaukee 37-205 37-207 6-inch Short Bed Jointer Operations and Parts Manual Click for ... moreOur Complete Catalog Manual Description: Number of Pages: 4 This is a reproduction. Not a photocopy, of an original Delta-Milwaukee 37-205, 37-207 6" Short Bed Jointer Operations and Parts Manual. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
Buy It Now
$18.00 Shipping Condition: New Location: Schaumburg, United States All working parts hardened and precision ground. 250-201 Turning & Facing Tool Holders, use tool bits up to 5/8". 250- 204 Heavy Duty Boring Bar Holder, ... morecan use 3/4" and 1" two size shank boring bars.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This is a reproduction, not a photocopy, of an original Rockwell-Delta 15-665 & 15-660 15" Drill Press 6 speed, 6" travel Instructions and Parts Manual. ... moreThe manual contains a complete set of exploded view diagrams of all the parts with parts list for this Rockwell drill press.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: BXA Size 250-222 Wedge Type Tool Post Tool Holders Set for Swing Dia 10 - 15" Suitable for lathe center height 0.7-2.2" (top compound surface ... moreto lathe center line) Interchangeable with Aloris, Dorian , Yuasa & Phase II Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes..
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description： Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: 250-111 Wedge Type Tool Post .
Buy It Now
Free Shipping Condition: New Location: Chino, United States BXA Size 250-222 Wedge Type Tool Post Tool Holders Set for Swing Dia 10 - 15" Suitable for lathe center height 0.7-2.2" (top compound surface to lathe ... morecenter line) Interchangeable with Aloris, Dorian , Yuasa & Phase II Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. .
Buy It Now
$15.00 Shipping Condition: New Location: Schaumburg, United States Such As:South Bend 9" & 10",Atlas 6", 10" & 12",Delta 10" &11",Nardini TT1000 &TT1200 and Many Other Similar Size Imported Lathe. It's too big, Not Suitable ... morefor 7" x 8", 7" x 12", 7" x 14" and 7" x 16" mini lathe Made in China.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Untitled Document Free. Fast Shipping Every Business Day! Delta-Milwaukee. 14-inch Metal and Wood Cutting Band Saw Operating and Maintenance Manual Click ... morefor Our Complete Catalog Manual Description: Number of Pages: 8. This is a reproduction. Not a photocopy, of an original Delta-Milwaukee 14" Metal and Wood Band Saw Operating and Maintenance manual. This manual contains information on set up. Lubrication, maintenance, adjustments, and controls as well as a parts list and diagrams. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
Buy It Now
$99.02 Shipping Condition: Used Location: Laurel, United States
Buy It Now
Free Shipping Condition: Used Location: Ottawa, United States
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is one pair of bearings.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States Headstock Spindle bore Reducer Sleeve for a Rockwell Delta 11" Metal Lathe, Click to View Image Album Click to View Image Album This tapered spindle ... morebore reducer sleeve has been tested on a R-D 11" metal lathe. Since I don't know the taper on adapter OD. I don't know if it fits other lathes. The ID is tapered for a 2 MT center or? Guaranteed to fit the R-D 11" lathe spindle! We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing se
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States It covers the model 46-110 and more. I have collected this information for many years and have found the information they contain to be priceless in using ... moreand setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find.
Buy It Now
$4.25 Shipping Condition: Used Location: Spring Grove, United States
Buy It Now
$172.80 Shipping Condition: For parts or not working Location: Webster, United States Because of this, they are sold AS IS, as found. WE WILL NOT!
$10.95 Shipping Condition: Used Location: Troy, United States Has an end bracket with a 5/8" bore mounts with 2 set screws. Local Pick-up Available.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Steel Quick Change CNC Tool Turning Facing Holder 250-101 202-9401. All working parts hardened and precision ground. 250-102 Boring,Turning Tool Holder,use ... moretool bit up to 1/2" and round shank tool bits up to 7/16".
Buy It Now
$4.25 Shipping Condition: Used Location: Spring Grove, United States
Buy It Now
Free Shipping Condition: Used Location: Point Pleasant Beach, United States
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This is a reproduction of an original Rockwell 34-440 10" Contractor's Saw Instruction and Parts manual. Also there is a nice drawing of the parts. If ... moreyour machine looks similar to the one pictured, this manual should cover your machine.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This is a reproduction, not a photocopy, of an original DELTA-Rockwell 16" Scroll Saw 4C-170, 40-100, 40-102 Owner's, Instructions & Parts Manual. The ... moremanual contains optional accessories that were available for this scroll saw.
Buy It Now
$6.05 Shipping Condition: New Location: Wilton, United States Things happen. I will be happy to work with you. I have a large database and have only listed a fraction of thus far. New reproduction of owner parts ... moremanual, Printed in black and white. 8 1/2 X 11" format, lay flat when open.
Buy It Now
$14.60 Shipping Condition: Used Location: Dekalb, United States The larger and taller a machine is the more likely they will require more than your average pallet. Now you can! Pallets that need to be enlarged will ... morerequire a larger pallet fee. We have two of these available.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This is a reproduction, not a photocopy, of an original Delta 10" Band Saw 28-195 Instructions and Parts Manual. Assembling Band Saw To Stand..7. CONNECTING ... moreBAND SAW TO POWER SOURCE.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Fits all Front Shaft Delta Rockwell 1/2hp Motors.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Untitled Document Free. Fast Shipping Every Business Day! Delta-Rockwell 16.5-inch 17-900 and 14-inch 14-040 Drill Press Operations and Parts Manual Click ... morefor Our Complete Catalog Manual Description: Number of Pages: 23 This is a reproduction. Not a photocopy, of an original Delta-Rockwell 16.5" Floor Drill Press 17-900 and 14" Bench Drill Press 14-040 Operations and Parts Manual. This manual contains information on adjusting the operation, adjustments, maintenance, and a complete set of exploded view parts diagrams of all the parts. Please read index below picture. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
Buy It Now
Free Shipping Condition: Used Location: Laurel, United States
Buy It Now
$13.53 Shipping Condition: New Location: Perth Amboy, United States Fits both Standard and Taper Lathes.
Buy It Now
$6.05 Shipping Condition: New Location: Wilton, United States New reproduction of owner parts manual, Printed in black and white. I have a large database and have only listed a fraction of thus far. Things happen. ... moreI will be happy to work with you. 8 1/2 X 11" format, lay flat when open.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: AXA Size Quick Change Tool Post Set for Lathe 6 - 12" 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2" and round shank tool bits ... moreup to 7/16" Brand new Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many other import lathes Interchangeable With Aloris, Dorian , Yuasa & Phase II It is precision engineered to assure repetitive accuracy No time wasted with shims.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description?? Brand new No time wasted with shims All working parts hardened and precision ground Wedge type tool post are precision engineered to assure ... morerepeatability accuracy Wedge type tool post Have the Maximum rigidity to get the chatter free performance Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11" Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of: .
|
|
|
|
Vintage Delta Rockwell Milwaukee wood lathe motor, pulley, cord, plug, no switch
SHIPPING TO USA 48 STATES ONLY FOR THE STATED PRICE. Motor from a Delta lathe in great original condition. J-box tweaked but EZ fix. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14162fb4b67-0xfc-
|
|
|
Vintage Delta Rockwell Milwaukee wood lathe 3" faceplate with original wrench.
Delta 3" faceplate with original Delta wrench. 1" X 8 threads-per-inch mounting. Right-hand threads for inboard turning. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1416a2aa2c4-0xfb-
|
|
|
Vintage Delta DDL-30 Lathe Sander Table ONLY Very Good No Reserve
Vintage Delta DDL-30 Lathe Sander Table ONLY Very Good No Reserve You are bidding on the Vintage Delta Rockwell Lathe sander table casting. Part number DDL 30, with it's three original mounting screws shown in the photos. No other items are included. This is the table which is part of several sanders that mount on Delta lathes. Model 347 and 347A. It fits many Delta Rockwell 11" and 12" lathes- Please do your own research before bidding. This may be an older version because it has no sign of ever having a nameplate, but it does have"DELTA" cast on the underside along with the part number. It has some surface rust on the unpainted areas and the paint could use some refreshing. No deep pitting, No cast iron cracks, No major gunk or grime. This table can be cleaned up and painted in short order if you have a wire wheel ... moreon your drill or grinder. Or skotch-brite pads. I'm saving my time and your bid money by selling it without that effort. GUARANTEE- This item is guaranteed to be in the condition stated above on arrival. IF that is not found to be the case. You may return the complete item, shipped within 14 calendar days of receipt, for a full refund of the bid price. NO partial returns. NO refund of two way shipping costs. No refund if returned after 14 days. Your bid price will be promptly refunded after it arrives back with no shipping damage. Shipping damage(in either direction) will be handled through an insurance claim. You are responsible for return-shipping insurance if you choose to return the item. The Fine Print- Read BEFORE bidding. By placing a bid. You agree with all written below: The winning U.S. bidder pays the bid price + $ 14.00 shipping cost. Your payment must arrive within 7 Calendar days of auction end and must be made by PayPal. Ebay no longer allows other payment methods for items that will be shipped. Sorry. This item may also be picked up locally with no shipping or handling charge by the winning bidder at a mutually convenient time, but in that case payment canno
|
|
|
Vintage 24" TOOL REST #694 DDL 57 for Delta Rockwell Wood Lathe
Vintage Delta Model 694 DDL-57 24" Lathe Rest with 1" posts Very Good No Reserve You are bidding on the Vintage Delta Rockwell Lathe Rest shown in the photos. No other items are included. This is the extra long Model 694(part number DDL 57) Rest with two posts. It fits many Delta Rockwell lathes. Please do your own research before bidding. I think this is an older version becaue it has the model number cast in along with the part number. It has some surface rust on the unpainted areas and the paint could use some refreshing. No deep pitting, No cast iron cracks, No major gunk or grime. This lathe rest can be cleaned up and painted in short order if you have a wire wheel on your drill or grinder. Or skotch-brite pads. I'm saving my time and your bid money by selling it without that effort. GUARANTEE- This item is guaranteed to ... morebe in the condition stated above on arrival. IF that is not found to be the case. You may return the complete item, shipped within 14 calendar days of receipt, for a full refund of the bid price. NO partial returns. NO refund of two way shipping costs. No refund if returned after 14 days. Your bid price will be promptly refunded after it arrives back with no shipping damage. Shipping damage(in either direction) will be handled through an insurance claim. You are responsible for return-shipping insurance if you choose to return the item. The Fine Print- Read BEFORE bidding. By placing a bid. You agree with all written below: The winning U.S. bidder pays the bid price + $ 16.00 shipping cost. Your payment must arrive within 7 Calendar days of auction end and must be made by PayPal. Ebay no longer allows other payment methods for items that will be shipped. Sorry. This item may also be picked up locally with no shipping or handling charge by the winning bidder at a mutually convenient time, but in that case payment cannot be by PayPal because of their online delivery confirmation requirement. You must ask for payment terms before bidding if you plan on picking up locally. Items th
|
|
|
Delta Rockwell Metal Lathe, Saw Adjusting Hand Wheel - DJ 28
This auction is for a Delta Rockwell Metal Lathe. Saw Adjusting Hand Wheel. It is marked DJ 28. It is in fair used condition. Scratches throughout and coating lose. No cracks to metal. Measures approx 4" Hole section is approx 5/16" Inside is approx 3/4" deep. This is AS IS! What you see is what you get! I aquired this from a local sale along with other woodworking machine parts that I will be listing over the next couple weeks. I require payment within 4 days of end of auction. I also require insurance to be paid by buyer on all standard post mail items reguardless of item cost, and all priority mail items over $50.00, or item will not be shipped. I ship to address provided by paypal, so if address differs, shipping cost will be affected. Please view my other auctions for more woodworking machine parts, and items. Feel free ... moreto email with questions or for more pics. Happy Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-141748eaf88-0x103-
|
|
|
Rockwell Delta wood lathe outboard hand wheel
Delta Rockwell wood lathe outboard hand wheel. Overall good condition. A couple of the holes are worn. This is threaded 1"8 left hand. Part# 938. Shipping is to the continental U.S. only. Payment is to be made within 7 days of auction close by Paypal only. Thanks for looking!
|
|
|
Vintage Delta Rockwell Milwaukee lathe wrench #942 for banjo or tailstock
Delta tailstock or banjo wrench. Number cast into the back is CAT.942.
|
|
|
Delta Lathe Cast Iron Legs 945 1460 saw drill jointer sander
Delta Lathe Cast Iron Legs catalog# 945 one pair heavy cast iron construction fits Delta 12" and 11" woodworking lathes. Including 1460 and others no cracks chips repairs or damage buyer may wish to clean and/ or repaint to taste shipping is for lower USA CONUS only other locations please ask- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than ... moretwenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and research. Ask questions! I will offer whatever honest answers I can. Purchase price refunds/ returns are accepted in the event I have expressly misrepresented an item or it's condition. Working together, I hope to make this a no hassle, FUN buying experience that you will want to
|
|
|
15 kva 3 phase transformer, 480 delta - 208Y/120, CNC, wire edm, lathe, vmc
Here is a 15 kva 3 phase transformer. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
|
|
|
BANJO TOOL REST HOLDER Delta Rockwell Homecraft Wood Lathe DDL 171
Banjo tool rest holder handle moves easily good cond.
|
|
|
Delta cat no 942 wood lathe wrench
Up for bid is a very nice Delta cat no 942 tailstock/banjo wrench. Item is in great condition. Please ask questions before bidding. Thank you.
|
|
|
Delta Milwaukee vintage motor lathe drill press 1/3 hp RI dual shaft
I bought this motor restored several years ago from Walker Turner Machine restoration and last had it on a drill press. Bearings replaced. New motor leads and armature turned, repainted. This much restoration was done, maybe more. 1/3hp 1725 rpm 1/2 dual shaft. Runs smooth and strong.
|
|
|
ROCKWELL DELTA 11" METAL LATHE 40 TOOTH SPINDLE DRIVE GEAR - GREAT SHAPE!
The following parts came from an 11" ROCKWELL lathe. This lathe was in great shape when it was broken up and was NOT parted out due to wear& tear! THIS AUCTION IS FOR THE FOLLOWING PARTS: This is the 40T drive gear that sits on the end of the spindle. It's in great shape with no damage or significant wear. The ID is 1.750" Don't miss it! I'm going to include USPS Priority mail shipping for FREE! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item ... morein 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
Vintage Delta Milwaukee METAL LATHE COMPOUND TOOL CROSS SLIDE Working
Vintage Delta Milwaukee METAL LATHE COMPOUND TOOL CROSS SLIDE Working Generally good condition. Slides very nice and smooth. A little surface rust but not deep or bad. Check the pictures and request more if needed. One ball on a handle is broken off as shown in picture. ~~~ Ask questions. Be skeptical. Satisfy your curiosity. Request photos. I'm here to help. ~~~ I nter national buyers are responsible for any duties. Fees. Import taxes,VAT or b ri bes for border guards over and abo ve the cost of shipping. M y Policies with regard to any auction I list: 1. Please pay promptly. If you need an invoice before paying please ask and I'll send you one. If you need a little time email before you bid and we can discuss it. I try to be flexible but some people have taken advantage and messed it up for other honest folks who just need a few ... moreextra days til payday or til they win the lottery. 2. All items are described to the best of my knowledge. If any item is not as I have described, please contact me before leaving a negative feedback. I am happy to help if I have made a mistake or have unknowingly misrepresented something. All opinions I give in descriptions are my own. As I am not an expert on everything or anything. I might screw up. That being said, if something is sold"AS-IS" It is just that. I am honest and fair so please be the same to me. 3. Please leave positive feedback when you receive the item(s) if you are satisfied. Then I will know you are happy and it gives me a warm fuzzy feeling to see my positive count go up. If you have a reason to not leave me positive feedback. Please contact me before doing so and let us see what's up with that. I leave feedback in batches once a week or so. If you don't see my feedback for you please be patient. I leave feedback for all transactions. I will make every reasonable effort to please my customers. 4. I try very hard to ship the next business day after payment is received. However since I live in the country and it's a schlep to the USPS of
|
|
|
Delta Milwaukee DP220 vintage motor lathe drill press 1/3 hp dual shaft
Works good cord has been replaced. USA lower 48 state shipping only. Used so no returns or refunds.
|
|
|
Vintage Delta Milwaukee 3/4 H.P. Heavy Duty Dual Voltage 1725 RPM Lathe Motor
Vintage Delta Milwaukee 3/4 H.P. 1725 RPM Motor from Delta No. 1460 Wood Lathe This is a great dual voltage dual shaft 3/4 horsepower heavy duty Delta motor from a vintage Delta No. 1460 Wood Lathe. It's not pretty on the outside but it runs smooth and quiet and seems more powerful than one would think for a 3/4 horse motor. I doubt newer 3/4 HP motors could compare. It includes the built in switch on the side of the motor. It also includes the shaft cover on the back side. The motor specs are below. It's in e xcellent mechanical con dition. It have some light rust and scrapes and scratches on the outside. The cords should propably also be replaced. Overall. It's a great motor for our wood lathe, band saw, or other vintage tools. Please see the pictures for details. Model ML 82M950 3/4 horsepower Capacitor Start 1725 RPM 115/220 ... morevolts 8.8/4.4 Amps Single phase Frame 174 3/4" Shaft Reversible Includes motor switch Please see the pictures for details. We accept PayPal. Item to be shipped via USPS Parcel Post or FedEx Ground. and
|
|
|
Delta Rockwell Milwaukee Industrial Leg Lathe Base - Nice
The item featured is the item you are bidding on and will receive. Bidding will begin at $ 300.00. This item is for pick up only in Southbury. CT. All items shipped exclusively to the C ontinental United States ONLY PAYPAL IS ACCEPTED You are bidding on: ONE(1) ANTIQUE DELTA ROCKWELL MILWAUKEE INDUSTRIAL LEG LATHE BASE SEE PHOTOS FOR DETAILS Up for auction is an antique Delta Rockwell Milwaukee Industrial leg lathe base. It appears to be in nice condition. It is approximately 32" high and about 56" long. It is for pick up only at my consignor's in Southbury. Connecticut. This auction item was brought to me by my consignor. I do not know all the details about the items he brings me. But I do my best based on the information he tells me and what I can research on my own. If you have any questions, please ask BEFORE YOU BID and ... moreI will be more than happy to contact my consignor for the answer- so bear with me. ONLY SERIOUS BIDDERS PLEASE. Thank you. If you have any questions. Please feel free to ask and I will do my best to answer them. Thank you. Good luck and happy bidding! Sold as is. You determine the value from the pictures. Payment expected within 5 days from the end of the auction unless prior arrangements are made before the auction ends. I discount shipping for multiple items won. This item does not ship outside the United States. Paypal is the only acceptable form of payment.
|
|
|
Delta Rockwell Milwaukee 4 Step 5/8" Pulley for Lathe Band Saw Drill Press # 932
VINTAGE FOUR STEP PULLEY FROM A DELTA ROCKWELL WOOD LATHE. THIS PULLEY IS IN EXCELLENT CONDITION WITH NO BREAKS OR CRACKS. IT HAS A 5/8" KEYED BORE. THE PULLEY IS PART NUMBER 932 AND WAS USED MOSTLY AS THE MOTOR PULLEY ON WOOD LATHES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14216621cba-0x107-
|
|
|
Delta Ironbed1440 Lathe Used Good Condition WORKS! Model: 46-715
You are looking at Used Delta Ironbed1440 This lathe has been gently used over the last year and has worked well for us Great for light sanding and light work The original motor has been replaced with one that has a lower torque There is an added switch that allows easy on and off control of the lathe The serial number is: 015031Q3052 Model# 46-715 The lathe stands alone on its own self contained table and is great for any craftsman. More photos available upon request. Local pick up available. We will ship. But the cost of shipping and arranging the shipment would be handled by the buyer. Please let us know if you have any questions. We will be happy to answer them
|
|
|
Delta Part Steady Rest Shaper Fence Lathe Table Saw Tenoner Tail Stock FREE SHIP
Delta Part Steady Rest Shaper Fence Lathe Table Saw Tenoner Tail Stock FREE SHIP Offering to you today. We have this vintage DELTA SF1 SF2 machine part. 7 1/2" tall, 14" front to back by 2 3/8" side to side. Embossed on the arch. Great piece to add to your collection or shop or garage today! View more auctions from Wehavituneedit! A buyer is strongly encouraged to fully review the item details and ask questions before you bid or buy. Please contact us through eBay or call at 217-779-3992. We do our very best to describe the item being sold. Our store is located 10 minutes south of Quincy. Illinois. Payment Please send your Paypal payment within twenty-four hours of being invoiced. Shipping We use FedEx Ground. And FedEx Freight to ship our items. Free Shipping" ONLY applies to purchases that will be shipped within the ... morecontinental United States. Alaska. Puerto Rico, Hawaii, or International buyers are welcome to contact us for a shipping quote. Tax Illinois state sales tax is 6.25% and will be charged if a buyer picks up and pays for an item at our location. Powered by
|
|
|
Rockwell Delta 11" Metal Lathe Forward Reverse Handle w/ Gears
Rockwell Delta 11" Metal Lathe Forward Reverse Handle w/ Gears in excellent condition but needs to be cleaned I have a Logan 10" 1821. South Bend 9A and a 10" Atlas metal lathe that I will be listing parts from this month so if you need anything from one of these lathe message me through ebay and I will list the parts you need. This will be shipped USPS Insured within 24 hours of receiving cleared payment not including weekends or local pickup is available
|
|
|
(2) ROCKWELL-DELTA 46-525 12" x 36" WOOD LATHE WITH GUARDS! ~ THREE PHASE
USED(2) ROCKWELL-DELTA 46-525 12" x 36" WOOD LATHE WITH GUARDS! ~ THREE PHASE These lathes came out of a local wood shop education center that was shut down. Both units were working well when removed. The hinge on one of the cabinet doors is broken. These units have been in storage and may need tightening or miscellaneous nut and bolt hardware replacement. They come exactly as shown. Items are sold AS-IS NO WARRANTY. Free pickup or Buyer is responsible for all shipping costs. Shipping Dimensions: ~ 48x58x52" Tall/ 700#
|
|
|
Delta-Rockwell 12" x 36" Wood Lathe - With Gap - Variable Speed - Single Phase
We are offering a Used Delta Rockwell 12" x 36" Wood Lathe. With removable gap, Single phase variable speed drive, tool rest, small face plate, As per photos. No charge to load, Reasonable shipping may be available into parts of Nevada and California. Please email your questions. Thanks for Looking!
|
|
|
Rockwell Delta International 4 Speed Wood Lathe Model 46-111 Cabinet Tail Stock!
Rockwell Delta International 4 Speed Wood Lathe Model 46-111 Cabinet Tail Stock! Today we are offering this ROCKWELL International 4 Speed Wood Lathe. 42 1/2" tall(with equipment) 30" table alone. 55 1/2" side to side by 16 3/4" front to back. Working condition! Model 46-111, Serial L08502. Add this to your shop today! Did not plug in to see if works! View more auctions from Wehavituneedit! A buyer is strongly encouraged to fully review the item details and ask questions before you bid or buy. Please contact us through eBay or call at 217-779-3992. We do our very best to describe the item being sold. Our store is located 10 minutes south of Quincy. Illinois. Freight items are shipped with FedEx freight. So please send us your zip code and type of location(home, business, loading dock, etc. and we will send you a quote. ... moreYou may also make your own freight arrangements, but we will charge a fee to box or palletize if necessary. We do not ship freight items outside the continental United States. Payment Please send your Paypal payment within twenty-four hours of being invoiced. Tax Illinois state sales tax is 6.25% and will be charged if a buyer picks up and pays for an item at our location. Contact us]View other listings] Another auction from WehaveitUneedit! Powered by
|
|
|
Bed / Delta Milwaukee 12" Woodworking Lathe / model 76-5167 with 36" bed
Bed Delta Milwaukee 12" Woodworking Lathe/ model 76-5167 with 36" bed The bed is in nice physical condition though repainted. NOTE: You are buying the bed only. The headstock is listed separately and the remaining parts have been sold. Pick up only in Petersburg. Virginia. Loading help will be provided.
|
|
|
Rockwell 3" Lathe Face Plate DDL 180 Delta Wood Lathe 46-450 1970's Vintage Tool
Vintage 1970's era Rockwell 3" Lathe Face Plate Marked DDL 180. From Delta Wood lathe 46-450 Three holes for mounting. See photos. Original finish. Barely used. Posted with
|
|
|
DELTA ROCKWELL TOGGLE SWITCH FOR TABLESAW DRILL PRESS JOINER LATHE SCROLL SAW
DELTA ROCKWELL( TOGGLE SWITCH FOR TABLE SAW. DRILL PRESS, JOINER, LATHE, AND 24 INCH. SCROLL SAW. WORKS. THERE ARE 2 PLATES AND 2 SCREWS. USA SHIPPING ONLY. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Delta Lathe Metal/ Woodworking Compound XY Cross Slide
Delta Lathe add on Metal and Wood compound XY cross slide. This is a finely crafted compound XY cross slide device to be attached to your Delta lathe but would probably fit other lathes with the same bed type and swing capacity. There is no play in the X and Y slides. I originally got it with the lathe and have used it on ocassions. It did not come with the cutting head which I had manufactured at a machine shop. Everything works perfectly as far as I can tell. One of these sold last month for $265 and I think the original cost was around $700. Shipping only the continental U.S.Thanks for looking.
|
|
|
Rockwell Delta dust door knob for Unisaw, shaper, or wood lathe
Delta Rockwell dust door knob for Unisaw. Shaper, or wood lathe. This is in good condition, but has some wear on the cam face( yes, I know it's together backwards in the picture) Shipping is to the continental U.S. only. Payment is to be made within 5 days of auction close by Paypal only. Thanks for looking!
|
|
|
ROCKWELL DELTA 1/3 HP ELECTRICAL .33 MOTOR DRILL PRESS LATHE SCROLL BAND SAW
UP FOR SALE HERE IS A ROCKWELL 1/3 HP 1725 RPM 115 VOLTS ELECTRICAL MOTOR THAT CAME OFF AN METAL LATHE BUT COULD BE USED ON A DRILL PRESS SMALL SANDER WOOD LATHE SETUP SCROLL OR BAND SAW. OR A SLOW SPEED GRINDER GRINDING BUFFER BUFFING ARBOR. HAS 1/2" SHAFT WITH A FLAT ON IT(BUT NO KEYWAY) THIS.33 HP ELECTRIC MOTOR HAS A BUILT IN FOWARD/ REVERSE SWITCH THAT IS MOUNTED ON THE MOTOR. JUST TURN THE MOTOR OFF AND THOW THE SWITCH IN THE OPPOSITE POSITION AND TURN IT BACK ON AND IT CHANGES DIRECTION. THE MOUNTING HOLES ARE 4 3/8" X 2 3/4" ON CENTER. THE TWO BARE WIRES ARE FOR YOUR ON/ OFF SWITCH. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
6" face plate for a Rockwell Delta wood lathe 1" x 8 tpi
Nice used faceplate. 1"x 8 TPI. Posted with
|
|
|
DELTA ROCKWELL Wood Lathe # 5792
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! DELTA ROCKWELL Wood Lathe# 5792 Item Description: This is a DELTA ROCKWELL Wood Lathe. Serial# 5792. Bed approx 46" Approximate dimensions: 58"W x 47"H x 10"D The items in this auction were ... moreremoved from a working environment prior to storage. But were not tested at inspection. NOTE: No loading dock. Forklift or District Personnel available for assistance at this school location. All Buyers must remove their items and be off of School premises by 1:50 p.m. on pick up days. No exceptions. NOTES: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Ojai. CA, 93023 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 37655) nbsp, nbsp, Model: 5792, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Size: 58"W x 47"H x 10"D, nbsp, nbsp, Condition: This item is used and sold as-is. This item w
|
|
|
Vintage 8 piece Delta Turning Tool Lathe set No. 130 in original box
You are looking at a 8 piece lathe tool set by Delta. The box is 17 3/4" X 10 3/4" I took pictures of both sides of the tool ends. Two still have the"wax" coating. I did not try to clean the tools. It does not appear to be rust. The pictures should show details and condition.
|
|
|
Delta Rockwell 12" Wood Lathe, Stand Planks.
Used vintage original stand planks from a vintage Delta 12" wood lathe. Good used condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell 12" Wood Lathe, Cast Iron Leg Set. DDL 187
Used cast iron leg set from a vintage Delta 12" wood lathe. Great condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell Wood Lathe, Drill Chuck 5/8" Jacobs
Used Jacob 5/8" drill chuck from a vintage Delta 12" wood lathe. M-2 Taper. Good used condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell Wood Lathe, Centers Spur & Live
Used spur drive. live tail centers from a vintage Delta 12" wood lathe. Good used condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell 12" Wood Lathe, Tailstock CBL 402 & CBL 403
Used tailstock from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell Wood Lathe, Toolrest 4" DDL 4
Used 4" tool rest from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell 12" Wood Lathe Headstock Cover
Used headstock cover from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143bb668805-0x106-
|
|
|
Delta Rockwell 46-140 46-146 16" woodworking lathe center bed extension assembl
16 inch lathe bed extension for a Rockwell Delta 46-140 woodworking lathe. Stamped 425-99-006-0003 I believe is also known as center bed section 46-146. May fit other models but that is what it came from. A hard to find accessory for the 46-140 lathe. Is used with signs of prior rust and grime/use. Overall in decent shape. There is a Beaver lathe that is apparently the same but I'm unsure of model. Comes with connecting bolts for one end which I assume are original. Nice addition for your lathe. See my other auctions for related part. Also have the 46-140 this came from for local pickup if interested. Please e-mail with questions or for additional photos. Winning bidder pays $16 shipping.
|
|
|
Vintage ROCKWELL DELTA US 12" wood lathe 938 OUTBOARD HAND WHEEL 1" 8tpi Left #A
This sale is for one Nice ROCKWELL DELTA USA 938 OUTBOARD HAND WHEEL 1" 8tpi Left 4 12" WOOD LATHE#A. Excellent very nice clean fresh paint close inspection reveals small nicks and scratches on metal before being painted please refer to photographs for more detail. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government ... morewhen items cross the border. These are the sole responsability of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arisng from the use or possession of any purchased equipment, device or compo
|
|
|
DELTA 12" x 36" HEAVY DUTY VARIABLE SPEED WOOD LATHE SINGLE PHASE 46-200
DELTA 12" x 36" HEAVY DUTY VARIABLE SPEED WOOD LATHE SINGLE PHASE 46-200. Comes with many extra accessories. Please review photos for extras. Feel free to ask any questions before bidding. Thanks. Possible delivery option if within 50 mile radius of Springfield. IL.
|
|
|
L-00 Spindle Nose Protector Lathe Rockwell Delta
I no longer own my Delta 11 X 37 lathe. This is an aluminum cover that you screw onto the spindle when you use a collet adapter and a draw bar. In very good condition. Should fit any lathe with an L-00 taper. What you see is what you get. Please ask any and all questions before you bid. Sold as is no returns. Good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-143f3e8faa8-0xf0-
|
|
|
Rockwell Delta 4 four Speed 718 Pulley 24" Scroll Saw Lathe Band Saw 5/8" Bore
DELTA ROCKWELL FOUR STEP PULLEY NUMBER 718. WAS USED AS A MOTOR PULLEY FOR THE MODEL 40-440 24" SCROLL SAW. WAS ALSO USED WITH THE 14" BAND SAW AND SOME LATHES. HAS A 5/8" KEYED BORE AND IS IN EXCELLENT CONDITION WITH NO BREAKS. CRACKS OR REPAIRS. Will be parting out Vintage Delta Rockwell 24" Scroll Saw, including all parts. Retirement light, motor and the stand. If you need any parts please message me. Using the"ask a question" function. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143f3e9e2ff-0xef-
|
|
|
Three inch faceplate for Delta Rockwell Milwaukee wood lathe
Shipping to USA 48 states only. No charge for pick up in Vista CA 92083 This auction is for the Delta Rockwell Milwaukee Three inch faceplate shown in the photos below. Thanks for looking!
|
|
|
Delta-Rockwell Wood Lathe - Guard - Variable Speed - 3 Phase - 1HP
USED Delta-Rockwell Wood Lathe- Guard- Variable Speed- 3 Phase- 1HP I believe that this is a Model 46-400. ID Tag states Serial#121-7108 I will place on a Pallet. Buyer responsible for free pickup or all freight related charges. Shipping dimensions are approx. 24x60x52" Tall and approx. 450#
|
|
|
LATHE CHISELS DELTA SET OF (7)
LATHE CHISELS DELTA- SET OF(7) DELTA LATHE CHISELS. MADE IN U.S.A. IN GOOD/ VERY GOOD VINTAGE CONDITION. SEE PICTURES FOR DETAILS 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144126f2e9b-0xe8-
|
|
|
VINTAGE 1935 GETTING THE MOST OUT OF YOUR LATHE ~ DELTA ~ PAPER EPHEMERA ~ BOOK
This listing is for a 13th edition of a publication originally produced in 1935 published by Delta on Getting the most out of your lathe. This book is full of great tips and tricks for use on a lathe. Overall condition is good with no missing or torn pages. This listing includes free shipping anywhere in the USA. Sorry. No international sales. Thanks for looking!
|
|
|
VTG 1935 GETTING THE MOST OUT OF YOUR LATHE ~ DELTA ~ PAPER EPHEMERA ~
Measures 6" x 9" with 48 pages of wonderful graphics. Photos and informative text. VTG 1935 GETTING THE MOST OUT OF YOUR LATHE ~ DELTA ~ PAPER EPHEMERA ~
|
|
|
Medium Delta Rockwell Crank Handle Part # BM-4-S Jointer Lathe Table Saw
THIS IS THE MEDIUN SIZE BALL HANDLE USED BY DELTA ROCKWELL ON VINTAGE JOINTERS. LATHE CROSS SLIDE TABLES, TABLE SAWS AND OTHER EQUIPMENT. IT IS APPOX. 3-3/4" LONG AND HAS A 7/16" BORE. IT IS THE UNPLATED VERSION AND HAS A SPINNER HANDLE.
|
|
|
DELTA ROCKWELL DOUBLE DUTY LATHE TAIL STOCK HOLD DOWN DDL 112
Up for sale is a Delta Rockwell Double duty wood lathe hold down for tail stock or cross feed. Item is in good usable condition. DDL 112. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including ... morereturn shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked items the amou
|
|
|
Set of 4 Disston Wood Lathe Turning Tools - Delta, Craftsman
These Disston turning tools are in very good condition- some surface discoloration. Any questions- please ask. Happy to combine shipping- check my other listings. Shipping calculator is often high- if you wait for my invoice accurate charges will be reflected. Local pickup in upper Bucks County. PA always welcome- COD please.
|
|
|
Set of 3 Craftsman Wood Lathe Turning Tools - Delta, Powermatic
These Craftsman turning tools are in very good condition- some surface discoloration. The blades are 4" and the handles are 10" Any questions- please ask. Happy to combine shipping- check my other listings. Shipping calculator is often high- if you wait for my invoice accurate charges will be reflected. Local pickup in upper Bucks County. PA always welcome- COD please.
|
|
|
Delta Lathe 12 inch Wood Lathe Model 46-700 TAIL STOCK ONLY
Parting Out Delta 12 inch Variable Speed Wood Lathe Model 46-700. 1 1/2 inch Gap Bed Lathe. Complete Tailstock ONLY. Does not come with Cup Center or any other parts pictured. Excellent condition has had very little use. Need the space.
|
|
|
Delta Wood Lathe 12 inch Tool Rest Only
Parting Out Delta Lathe. This listing is for a Delta 12 inch Tool Rest Only. Does not include banjo or any other part pictured. Tool Rest Only. 12 inch long rest with 1 inch post mounting. Excellent condition has had very little use. I need the space;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144149fef26-0xef-
|
|
|
DELTA ROCKWELL 11/14 46-111 WOOD LATHE TOOL REST BASE
DESCRIPTION: USED. TOOL REST BASE FOR THE DELTA ROCKWELL 11/14 LATHE. NO CRACKS OR REPAIRS. IT USES 1" DIAMETER TOOLS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS ... moreIN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLA
|
|
|
DELTA ROCKWELL HOMECRAFT WOOD / METAL LATHE 46-230
Delta Rockwell Homecraft Wood/ Metal Lathe 11 inch lathe part number 46-230 Manufactured Sept. 1954 in Missippi Single phase 1/4 hp motor@ 1725 RPM w/ a four speed pully system In Great shape/ In working condition Many Accessories. 2 original manuals This was used by a home hobbiest not a shop Look at pictures for they are part of my description Ask questions at or 815-735-9125 This is a PICK-UP ONLY no shipping located in north central Illinois(50 miles s/w of chicago) a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14419ca2522-0xf5-
|
|
|
Delta 46-700 Lathe Offset Tool Rest Base; Ex. Cond.
This is an offset tool rest base for a Delta 46-700 variable speed wood lathe. It has a one inch post so that will determine if it will fit any other model lathes. This is a used item but as you can see it wasn't used very much. It's in great condition with only minor paint wear and chips. Ask any questions. Shipping will be USPS Medium Flat Rate at $12.35.
|
|
|
Delta 46-700 Wood Lathe Curved Tool Rest
This is a curved Delta tool rest for a model 46-700 wood lathe. It's used but in very good condition with little wear. The pictures should tell the rest of the story but if you do have any questions feel free to ask. Shipping is $12.35 USPS Medium Flat Rate.
|
|
|
Delta Milwaukee 1460 Lathe Headstock Spindle Pulley
From a Delta Milwaukee wood lathe as shown. Headstock spindle pulley with two set screws. The indexing holes are not perfect but still function. Used in good condition. Always glad to combine shipping when practical. Local pick up is good too.
|
|
|
Delta Rockwell/Milwaukee/Homecraft Wood Lathe Live Center-No 2 MT
A nice no. 2 Morse taper ball bearing live center from a Delta lathe in very good condition.
|
|
|
Delta Rockwell Wood Lathe Cabinet, Door Latch Handle
Used latch handle from a vintage Delta wood lathe cabinet. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1442ed9a8a5-0xfd-
|
|
|
Delta Rockwell Lathe 6" Face Plate 1" x 8tpi
From a Delta Rockwell wood lathe as shown. 6" face plate with 1" x 8tpi RH& LH. Used in very good condition. Always glad to combine shipping when practical. Local pick up is good too.
|
|
|
Delta Rockwell Lathe Jointer Sander Ball Crank Handle
From a Delta Rockwell machine as shown. Ball crank. 7/16" bore. Used in good condition. Always glad to combine shipping when practical. Local pick up is good too.
|
|
|
Delta Rockwell Lathe 12" Tool Rest with 1" Posts
Items from a Delta Rockwell lathe as shown. 12" tool rest. 1" posts. Used in very good condition. Always glad to combine shipping when practical. Local pick up is good too.
|
|
|
DELTA ROCKWELL WOOD LATHE ACCESSORY CLAMP - FITS A 1 1/2" GROOVE
I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
DELTA ROCKWELL 12" WOOD LATHE STEADY REST - INCLUDES MOUNTING CLAMP
Fits beds with a 1 1/2" gap. I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
DELTA ROCKWELL TAIL STOCK casting for a 12" WOOD LATHE
Here is a TAIL STOCK CASTING for a DELTA 12" WOOD LATHE. This part may be NOS and was taken from a school parts inventory in the 70's and has been on the shelf ever since. Not sure as to model so please check measurements. Ram opening is 1.11" the screw opening is 3/4" the base measures 5-3/4X 5-1/2. Part has almost all original paint and is shelf worn only. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost.
|
|
|
Rockwell Delta 12" WOOD LATHE Head Stock HEADSTOCK Item No. K2
Rockwell Delta 12" WOOD LATHE Head Stock HEADSTOCK Item K2. The head stock is used. And has no cover, and the indiexing pin is broken. The paint is chipped, scratched and dirty please see photographs. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to Combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encoura/ged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their/government when items cross the border. These are the sole responsability ... moreof the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arisng from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use,
|
|
|
DELTA ROCKWELL WOOD LATHE (2) LEGS SET - FOR LEGS ONLY SERIES 46-111 FK-6630
YOU ARE LOOKING AT A GREAT DELTA ROCKWELL WOOD LATHE(2) LEGS SET- MODEL SERIAL 46-111- FK-6630- THIS AUCTION IS JUST FOR THE LEGS ONLY- I STILL GOT THE 2 CROSS PIECES- EVERTHING ELSE BEEN SOLD- GREAT FOR RESTORING FOR MANY PROJECTS- GREAT POPULAR BRAND- GREAT LOW STARTING PRICE- GREAT FOR COLLECTION- SHIPPING IS 99.99- I DO COMBINE SHIPPING- INTERNATIONAL IS 999.99- JUST COST SO MUCH TO SHIP THERE- THANKS FOR LOOKING AT MY AUCTIONS! KEITH Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Delta 14" x 41" Precision Belt Drive Lathe - WELL EQUIPPED! LOOK!
Gold International Machinery Corporation | Delta 14" x 41" Precision Belt Drive Lathe Our Inventory Number: 7456-440 Technical Specifications: 230V/3PH/60HZ, S/N: 1368221, Swing over bed and saddle wings: 14-1/4" Swing over cross slide: 9-1/8" Distance between centers: 41" Hole through spindle: 1-3/8" Maximum collet capacity: 1-1/16" Spindle speeds: 40- 1750 RPM. Variable, Threading: 4- 224 TPI(54) Longitudinal feeds: 0017" to.099" 54) Cross feeds: 00089" 052" 54) Headstock/Tailstock centers: 3 MT, Spindle nose: L-00, Cross slide travel: 8" Compound slide travel: 4-3/4" Motor: 2 HP, Overall dimensions: 86" x 25" x 48" high, Estimated weight: 1950 lbs. Equipped With: 7" 3-Jaw chuck, Lever operated 5C draw bar, Flame hardened bed ways, 10 Face plate, This item ... moreis in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-
|
|
|
Delta Rockwell Milwaukee Lathe Live Center #2 Morse Taper
This auction is for a Delta Rockwell Lathe Live Center#2 Morse Taper. Very nice live center spins freely.
|
|
|
ROCKWELL-DELTA 12" x 36" WOOD LATHE ~ SINGLE PHASE 46-525
Welcome to my listing. Up for your consideration is a one owner Rockwell/Delta wood lathe 46-525 purchased new from a local Rockwell/Delta distributor. I have recently done a major upgrade to all my shop tools and replaced this lathe with a new one earlier this year. The lathe is in perfect condition, and has provided me excellent service without any issues, it has never been repainted all original. The headstock bearings are the original and still in great condition, and have many years of life left without the need to change them out. The headstock and tailstock line up perfectly, Reeves drive is in good condition and motor is a real workhorse. I have taken immaculate care of this lathe and wish I could keep it but I just don't have the room in the shop. Included with the listing is a new set of generic turning tools, I think I might ... morehave used them once or twice, new pulley belt, new change speed plate and original owners manual. I do have an extra original Rockwell motor for it and will be included with a"buy it now" purchase only. SPECIFICATIONS Swing over bed: 12" Gap over bed: 1 1/2" Distance between centers: 36" Bed size: 44" x 5 1/2" Spindle size: 1" x 8 TPI Headstock taper: 2 MT Tailstock taper: 2 MT Tool rest diameter: 1" Speeds(variable) 340- 3600 Motor: 3/4 HP/ 1725 RPM/ 115/230 V/ SINGLE PHASE EQUIPMENT INCLUDED* Rockwell stand and shelf* 2 Faceplates 3" and 6" Live center* Tool rest bed clamp* Dead center* Leveling feet* 6" 12" Tool rest* V-Belt* New speed indicator plate
|
|
|
Delta Rockwell Lathe Hold Downs for Banjo
Delta Rockwell Lathe Hold Downs for Banjo 5 hold downs with extra hardware. These will fit a 1 1/4" inch gap bed Delta Lathe. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144613e1f15-0x10e-
|
|
 |