|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States 【20W High-performance Cutting Capability】ATEZR P20 20W laser engraver with air assist adopts compressed spot technology, with a spot area as small as ... more0.06 x 0.08mm, making the cutting ability more powerful and the carving work more vivid.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States 【20W High-performance Cutting Capability】ATEZR P20 20W laser engraver with air assist adopts compressed spot technology, with a spot area as small as ... more0.06 x 0.08mm, making the cutting ability more powerful and the carving work more vivid.
Buy It Now
$49.00 Shipping Condition: New Location: China W2 90W 100W 1240mm 80mm Yes 10,000h 10 months. Length: The length is 1240mm. RECI CO2 Laser Tube W2 / S2 90W-100W. Besides, you get 10 months warranty ... moreand the top level after sale service. Reci W2co2 laser tube is suitable for laser marking,laser cutting andlaser engraving which are the ideal choice of laser paper - cut, laser cloth cutting and marble marking.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States 【20W High-performance Cutting Capability】ATEZR P20 20W laser engraver with air assist adopts compressed spot technology, with a spot area as small as ... more0.06 x 0.08mm, making the cutting ability more powerful and the carving work more vivid.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States 1x 50W CO2 Laser Engraver. Rotary Axis Compatible. 40W Laser Tube. The honeycomb and aluminum blade beds feature a 12"x20" (300x500 mm) work area to fit ... moremost projects. Air Assist & Exhaust Fan. Experience Safe & Clean Laser Engraving.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States 【20W High-performance Cutting Capability】ATEZR P20 20W laser engraver with air assist adopts compressed spot technology, with a spot area as small as ... more0.06 x 0.08mm, making the cutting ability more powerful and the carving work more vivid.
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States 1x 60W CO2 Laser Engraver. 40W Laser Tube. Experience Safe & Clean Laser Engraving Air Assist & Exhaust Fan. The honeycomb and aluminum blade beds feature ... morea 20"x28" (500x700 mm) work area to fit most projects.
Buy It Now
Free Shipping Condition: New Location: China Model: SG2206. SG2206 Galvo Head x 1. Good linearity, lower drift, high resolution and repeat positioning. Solved the common problems of motor temperature ... moredrift, signal interference and zero drift. W ith high signal-to-noise ratio and strong anti-interference ability.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States With Water Chiller. 1x 130W CO2 Laser Engraver. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and down at the touch ... moreof a button and the preinstalled autofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States 1x 60W CO2 Laser Engraver. Rotary Axis Compatible. 40W Laser Tube. Experience Safe & Clean Laser Engraving Air Assist & Exhaust Fan. The honeycomb and ... morealuminum blade beds feature a 16"x24" (400x600 mm) work area to fit most projects.
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States Your EzCad2-based fiber laser engraver works with LightBurn's latest galvo functionality on Windows, MacOS, and Linux systems to let you create even the ... moremost intricate patterns easily. LightBurn Compatible.
Buy It Now
Free Shipping Condition: Used Location: China Pulse width/maximum single pulse energy: 10-500ns Adjustable 1.2mJ. Pulse type. Laser Cleaner Specifics. Laser working mode/cooling mode: Pulsed/ Air ... morecooling. Average output power: ≥100W. Cleaning head weight (including isolator):
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically ... morefind the right focal distance for you. Get Right to Work with Autofocus.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Motorized Workbed. Included CW-5200 Water Chiller. 1x CW-5200 Water Chiller. 1x 60W CO2 Laser Engraver. This laser engraving machine's motorized workbeds ... morecan easily be adjusted up and down at the touch of a button.
Buy It Now
$24.80 Shipping Condition: New Location: China Laser source: 500mW 405nm blue purple light (optical power equivalent to 1500mW). File Transfer: Wireless Bluetooth 4.0. Product material: Aluminum alloy ... moreanodizing. Product weight: 190g. Support for: Android and Apple systems.
Buy It Now
$49.99 Shipping Condition: New Location: China Digital display current.
Buy It Now
Free Shipping Condition: New Location: China Model: S30 S30X(See the chart below for the difference). --Color: S30 black/red/green S30X Black.
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States Our 1650 mm CO ₂ laser tube provides 130W of power for up to 8000 hours or up to 12000 hours of operation when consistently used at lower settings. Compatible ... morewith most third-party graphic software, this laser etching machine lets you upload your designs using the included software or via the Ethernet or USB ports.
Buy It Now
Free Shipping Condition: New Location: United States OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series! We love keeping ... morethe OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Included CW-5000 Water Chiller. Built-in Autofocus. 1x 130W CO2 Laser Engraver. This laser engraving machine's workbeds adjust up and down at the touch ... moreof a button and the preinstalled autofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Raycus Laser Source. Laser Source: Raycus. and other materials with quick turnaround and perfect accuracy. Instead, it provides solid-state efficiency, ... morequality, stability, and durability for its entire service life of 100,000 hours.
Buy It Now
Free Shipping Condition: New Location: 庐阳区, China One piece water pump for 50w tube. One piece air pump for 50w tube. CO2 laser tube. X axis and Y axis guide rails integration including the motor and ... morediver. Two X axis guide rails integration,one Y axis guide rails integration the motor and diver.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States With Water Chiller. 1x CW-5200 Water Chiller. 1x 60W CO2 Laser Engraver. 40W Laser Tube. The honeycomb and aluminum blade beds feature a 20"x28" (500x700 ... moremm) work area to fit most projects. Experience Safe & Clean Laser Engraving.
Buy It Now
$10.00 Shipping Condition: New Location: China LC100 Laser Engraver 3D Printer Engraving Machine Desktop Etcher Cutter Engraver with Bracket Portable With Bluetooth. - Model: LC100. - 1 LC100 laser ... moreengraving machine host. [High-precision engraving, richer details] Using Japanese 405nm high-frequency laser light source, 0.1mm precise spot, with higher engraving accuracy and efficiency, long service life; unlimited engraving height, engraving range: 10 10CM; file format : JPG/BMP/PNG/G-code, photos/vectors are all supported.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically ... morefind the right focal distance for you. Get Right to Work with Autofocus.
Buy It Now
Free Shipping Condition: New Location: Carlstadt, United States Built-in Autofocus. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled ... moreautofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States Built-in Autofocus. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled ... moreautofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States With Water Chiller. 1x CW-5200 Water Chiller. 1x 60W CO2 Laser Engraver. 40W Laser Tube. The honeycomb and aluminum blade beds feature a 20"x28" (500x700 ... moremm) work area to fit most projects. Experience Safe & Clean Laser Engraving.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States With Water Chiller. Built-in Autofocus. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and down at the touch of a ... morebutton and the preinstalled autofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: China Applicable materials: color board, plexiglass, glass, acrylic, wood, leather, cloth, marble, bamboo, paper, rubber, plastic Etc. Laser Engraver Suitable ... moreUser. Laser type :CO2 laser engraving machine.
Buy It Now
Free Shipping Condition: New Location: China Features of SFX laser 50W handheld laser engraving machine. Laser output power: 50W. Marking speed: 800 characters (depending on material and marking ... morecontent). Marking speed/marking line type:
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Manual Focus Workbed. Included CW-5000 Water Chiller. 1x CW-5000 Water Chiller. 1x 60W CO2 Laser Engraver. The honeycomb and aluminum blade beds feature ... morea 16"x24" (400x600 mm) work area to fit most projects.
Buy It Now
Free Shipping Condition: New Location: United States With Water Chiller. Built-in Autofocus. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and down at the touch of a ... morebutton and the preinstalled autofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States 1x 60W CO2 Laser Engraver. Rotary Axis Compatible. 40W Laser Tube. Experience Safe & Clean Laser Engraving Air Assist & Exhaust Fan. The honeycomb and ... morealuminum blade beds feature a 16"x24" (400x600 mm) work area to fit most projects.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States 1x 60W CO2 Laser Engraver. Experience Clean Laser Engraving The honeycomb and aluminum blade beds feature a 16"x24" (400x600 mm) work area to fit most ... moreprojects. The built-in air assist efficiently removes smoke and dust to protect your laser lenses and reflective mirrors.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States Built-in Autofocus. Get Right to Work with Autofocus This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled ... moreautofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States With Water Chiller. Rotary Axis Compatible. 1x CW-5200 Water Chiller. 1x 80W CO2 Laser Engraver. 40W Laser Tube. Experience Safe & Clean Laser Engraving ... moreThe honeycomb and aluminum blade beds feature a 20"x28" (500x700 mm) work area to fit most projects.
Buy It Now
Free Shipping Condition: New Location: United States With Water Chiller. 1x CW-5200 Water Chiller. 1x 60W CO2 Laser Engraver. 40W Laser Tube. The honeycomb and aluminum blade beds feature a 20"x28" (500x700 ... moremm) work area to fit most projects. Experience Safe & Clean Laser Engraving.
Buy It Now
Free Shipping Condition: New Location: China Make sure to follow the operation instructions of model W8 as shown in the illustration. The dedicated power DY20 should be equipped. It may cause the ... morefollowing consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
Buy It Now
Free Shipping Condition: New Location: Rincon, United States OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series! and other materials ... morewith quick turnaround and perfect accuracy.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Bring your ideas to life with OMTech's laser engraver! Included CW-5000 Water Chiller. 1x CW-5000 Water Chiller. Safe as can be, this laser engraver and ... morecutter automatically cuts off the laser beam if the protective cover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: China Model: SG7110. SG7110 Galvo Head x 1. Solved the common problems of motor temperature drift, signal interference and zero drift. Good linearity, lower ... moredrift, high resolution and repeatpositioning. With high signal-to-noise ratio and strong anti-interference ability.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically ... morefind the right focal distance for you. Get Right to Work with Autofocus.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States The separate TEST button also speeds fault detection, so you can troubleshoot system problems with ease. Your kind consideration is highly appreciated. ... moreInput AC Frequency: 47-440Hz. Temperature Testing: Full Load for 12 hours at 140F (60C).
Buy It Now
Free Shipping Condition: New Location: Ontario, United States The separate TEST button also speeds fault detection, so you can troubleshoot any system problems with ease. Cutting Edge Features Output Current: 38mA ... moreDC. SIMPLE INSTALLATION: Each connection port is clearly labeled to facilitate quick and easy installation, and the connector boxes from similar models easily plug in directly.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States CO2 Laser Engravers. CO2 AF Series. CO2 MF Series. CO2 ZF Series. CO2 DF Series. CO2 Accessories. CO2 Rotary Axis. Others CO2 Accessories.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Motorized Workbed. This laser engraving machine's motorized workbeds can easily be adjusted up and down at the touch of a button. 1x 60W CO2 Laser Engraver. ... moreExperience Safe & Clean Laser Engraving 1x Water Pump.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Sealed Co2 Laser Beam --- The sealed C02 laser beam has a power of 80W and a wavelength of 10.6 µm. The improved mount generates stable laser beams for ... morefaster. The water cut protection system protects the laser tube from being burned out.If the water cooling system fails suddenly, the temperature of the laser tube will rise.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States With Water Chiller. Rotary Axis Compatible. 1x CW-5200 Water Chiller. 1x 80W CO2 Laser Engraver. 40W Laser Tube. Air Assist & Exhaust Fan. Experience ... moreSafe & Clean Laser Engraving Detachable Base.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Included CW-5000 Water Chiller. 1x CW-5000 Water Chiller. 1x 60W CO2 Laser Engraver. The honeycomb and aluminum blade beds feature a 16"x24" (400x600 ... moremm) work area to fit most projects. The built-in air assist efficiently removes smoke and dust to protect your laser lenses and reflective mirrors.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States 1x 130W CO2 Laser Engraver. Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled ... moreautofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States 1x 130W CO2 Laser Engraver. Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled ... moreautofocus will automatically find the right focal distance for you.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically ... morefind the right focal distance for you. Get Right to Work with Autofocus.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective cover is opened and provides an installed air assist ... moreto blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States 【20W High-performance Cutting Capability】ATEZR P20 20W laser engraver with air assist adopts compressed spot technology, with a spot area as small as ... more0.06 x 0.08mm, making the cutting ability more powerful and the carving work more vivid.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States 1x 50W CO2 Laser Engraver. Rotary Axis Compatible. 40W Laser Tube. Experience Safe & Clean Laser Engraving Air Assist & Exhaust Fan. The honeycomb and ... morealuminum blade beds feature a 12"x20" (300x500 mm) work area to fit most projects.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States With Water Chiller. 1x CW-3000 Water Chiller. 1x 50W CO2 Laser Engraver. 40W Laser Tube. The honeycomb and aluminum blade beds feature a 12"x20" (300x500 ... moremm) work area to fit most projects. Experience Safe & Clean Laser Engraving.
Buy It Now
Free Shipping Condition: New Location: China Model: S30 S30X(See the chart below for the difference). --Color: S30 black/red/green S30X Black.
Buy It Now
Free Shipping Condition: New Location: China Model: S30 S30X(See the chart below for the difference). --Color: S30 black/red/green S30X Black.
|
|
|
|
Scientific Laser Box with Power Supply
Scientific Laser Box with Power Supply Model SLC9mWdiode. 9mW Diode. Made in America! Works! As-is. Not Calibrated.
|
|
|
ELECTRIC BOX W/ 2 SYNRAD RF POWER SUPPLY M/N 60 RF FOR ROFIN LASER DVANCE 14F200
TAG#8324- ELECTRIC BOX W/ 2 SYNRAD RF POWER SUPPLY M/N 60 RF FOR ROFIN LASER. SERIAL#147 AND 153. 2 DVANCE MODEL# 14F20006027L1, OPTION: G, SERIAL# 00936 AND 00931, DATE: 1998. SPRECHER + SCHUH MODEL# CA3-43-N-11, ELECTRIC BOX SIZE: 47" X 32" X 12" WEIGHT ON PALLET: 352 POUNDS. THERE WILL BE AN ADDITIONAL $25.00 HANDLING FEE* PLEASE WAIT FOR OUR INVOICE BEFORE SENDING PAYMENT FOR ACCURATE SHIPPING CHARGES* This Disclaimer has no effect on our Warranty or Return Policy in ANY way. MACHINERY/EQUIPMENT DISCLAIMER. TERMS& CONDITIONS 1. Buyer hereby acknowledges and confirms that its provision of this WAIVER OF LIABILITY AND INDEMNIFICATION AGREEMENT is a material inducement to TEST HEAVEN/EEE/MERVIS EQUIPMENT SALES. Divisions of MERVIS INDUSTRIES, INC. hereinafter referred to as"Seller” to sell said materials and equipment ... moreto Buyer, that the provision of this agreement is a material part of such sale by Seller to Buyer, and the terms and conditions contained herein shall apply to any and all sales by Seller to Buyer. 2. DISCLAIMER. SELLER HEREBY DISCLAIMS AND BUYER HEREBY WAIVES ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR DEMAND IN CONTRACT, OR(INCLUDING NEGLIGENCE) STRICT LIABILITY, PATENT INFRINGEMENT OR OTHERWISE WITH RESPECT THERETO. Without limiting the generality of the foregoing, Buyer acknowledges and agrees(i) that Buyer accepts the entire risk and responsibility of taking any necessary action(including performing inspections and undertaking physical modifications) to make the materials and equipment operate satisfactorily and comply with any applicable federal, state, or local laws, ordinances, regulations and standards, including regulations and standards promulgated under federal and state occupational safety, environmental and health laws and(ii)that Buyer shall indemnify and hold Seller and The Third Party Beneficiary harmless from all claims, causes of action, costs and expenses arising out of the purchase and use of the materials and equipment without exception. 3. LIMITATION OF
|
|
|
Hoya Optics Laser Power Supply L-210-P2 150w w/ HEAD (L-212-G2N), READ
Hoya Optics Laser Power Supply L-210-P2 150w w/ HEAD(L-212-G2N) In good condition. Powers on, fan ON but nothing is displayed. AS IS. Shipping: Domestic: $45. FedEx Ground(including insurance) shipment within the United States. International: Fed Ex is our preferred carrier. If you have a different preference, please let us know. You may also use your own shipping account(FedEx or DHL or UPS) Please email your account number and the type of shipping service. Items will usually ship the same day payment clears. We will attempt to combine shipping wherever possible. Items is available for local pickup. However an appointment is required. Payment: We accept Paypal. Wire Transfer, Check, Credit Card(Visa/MC/AMEX) All transaction must clear before item ship. Unsecured funds must clear prior to shipment. Sales Tax is charged to all shipment to ... morea California address. Unless a valid tax exemption certificate is provided. Payment must be received within 7 days. Warranty: Warranted returns will be replaced or repaired. A refund will only be issued if the item cannot be replaced or repaired. This privilege does not cover items purchased in error. Damaged by customer misuse. Sales Listed"AS-IS" Items that are sold AS-IS are not covered under any warranty; express or implied. We do not accept returns on items sold AS-IS. NO EXCEPTIONS. Sales Listed"30 Day Right-to-Return" The buyer has 30 days in which to check the functionality of their purchase. If a problem is discovered. The buyer must notify us within the 30 day period. Defective items will be replaced or repaired. A refund will only be issued if the item cannot be replaced or repaired. Warranty starts the day item is shipped. Terms and Conditions: Your bid is a contract. Once you have placed a bid. You have entered a legally binding contract to purchase the item if you are high bidder at the auction close. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Melles Griot Laser power supply 561nm 85-YCA-010
This is a power supply/controller for a Solid State Yellow Laser System. For a 10mW system. Perfect for Cytometry. Scanning microscopy, metrology, spectroscopy, fluorescence and interferometry. Has no key, but was jumped for testing. Comes with a 30 day warranty. BN:5
|
|
|
SPECTRA-PHYSICS LASER POWER SUPPLY 285-F11 285F11 REV. 0W 180-210VDC 4-12A
SPECTRA-PHYSICS LASER POWER SUPPLY MODEL: 285-F11 REV. 0W INPUT: 230~16A 50/60Hz OUTPUT: 180-210VDC@ 4.0-12.0A Condition: NEW. In box. NEW. No box. NEW. Old inventory. X USED. But in good working condition. REPAIRED. Unused since repairs. USED. SOLD AS IS, No warranty's no refunds. DETAILS: This listing is for only what is pictured. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise ... morediscussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or
|
|
|
500 Watt Coherent Diamond K500 Co2 Laser Head with Power Supply & Beam delivery
500 watt Coherent Co2 Laser manufactured in 2004. Comes with everything shown. Item was purchased in a lot sale of other items that we were interested in. This is a very high end laser. Sealed laser no external gas required. We have no capacity or knowledge of lasers to test this item. Sold as shown as is. Thank you for looking Pick up preferred If not picked up shipping and packaging costs will be buyers responsibility.
|
|
|
Brother MFC - 8220m Laser printer parts - Low Voltage Power Supply PCB Assy.
Up for sale are many parts for a brother MFC-8220 laser printer: Part description: Low Voltage Power Supply PCB Assembly All parts are used but were in very good working condition upon last inspection. All parts are being sold“as is” But at“VERY REASONABLE” prices, with a“14 day money back guarantee” If the part does not function properly, all serial#s are recorded to prevent fraudulent returns) I will refund your full purchase price(shipping charges excluded) I will combine shipping charges with multiple part orders to save the buyer as much money as possible. If you have any questions please e-mail me and I’ll respond ASAP. Thanks for looking and have a great day!
|
|
|
Major MJJG 60 watt CO2 Laser Power Supply
60 Watt power supply for CO2 lasers. I have a few hours on this unit powering the laser tube I also have listed. Includes a wiring diagram(which wasn't included when I bought it.
|
|
|
MAXWELL ALS175025R0003A LASER POWER SUPPLY, 220VAC, 4500W, 25A, SCRIPT 75
All Auctions Start at $3.99 Inventory Number: 12131680006 Manufacturer: Description: MAXWELL ALS175025R0003A LASER POWER SUPPLY. 220VAC, 4500W, 25A, SCRIPT 75 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, WIRES CUT FOR REMOVAL FROM MACHINE BEING SCRAPPED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payment& Taxes: Payment MUST be received within 5 business days of auction's end. Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing under 50 pounds. We only accept PAYPAL for our auction items. We collect sales tax for the following states: KS. MA, MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna for instructions on how to supply us with a tax exempt form via fax or email. The invoice will ... moreautomatically charge tax and you will need to notify us PRIOR to payment to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. Shipping: We ONLY combine items won within the same calendar week(Monday-Friday) We cannot issue shipping refunds after payment has been made. To receive a combined shipping rate you must contact us for a combined invoice. PRIOR to payment. Payment MUST still be received within 5 business days of auction end. All orders over $100 will require a UPS Delivery Signature Confirmation. Local pick up is available during eBay Department business hours Monday-Friday 8AM- 3PM(holiday hours vary. Please call) Saturday pick up requires 24 hour notice. Items must be paid through PAYPAL prior to pick up. If you need to make pick up arrangements outside of our business hours, please call 440-668-4517. Items MUST be picked up within ONE WEEK of payment. We do not falsify customs declaration values of purchased items for international shipments. Cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any refunds. Buyer pays return shipping. We do not c
|
|
|
Melles Griot 05-LHP-401 HeNe LASER & Melles Griot 05-PSAF-829-045 Power supply
what you are buying or bidding. ONLY 1 psc used woring Melles Griot 05-LHP-401 HeNe LASER(MFG'D:2008) And ONLY 1 psc used working Melles Griot 05-PSAF-829-045 Power supply(DC12v input) NO others come with MY AC Power supply ARE NOT INCLUDED. Terms and Conditions PAYMENT: Buyer prepays with PayPal. Or Credit Card using PayPal and pays shipping and handling charges as noted in the listing. SHIPPING: HongKong Post Air Mail 20 business days To most countries To USA or UK. 10 business days. TO RU，ITA，BR. 50 business days. Winning bidders will receive a payment request by e-mail within 48 hours of the auction's completion. Payment must be received within 7 days of the auction's closing date. Or the next highest bidder may be offered the sale. If you have any questions. Please contact me BEFORE bidding RETURNS& WARRANTY: Guaranteed ... moreto arrive in condition as described in the listing. Otherwise we will refund your money(less shipping) or replace the unit if a replacement is available. Items must be returned within 14 days after receip
|
|
|
Innova Technology Coherent Enterprise II ENTCII-653 Laser Power Supply Unit
Search our eBay Store! Innova Technology Coherent Enterprise II ENTCII-653 Laser Power Supply Unit SKU: JV-MAT-A-COHERENTPS653 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Innova Technology Coherent Enterprise II ENTCII-653 Laser Power Supply Unit Model: ENTCII-653· Unit is untested. Dimensions(L”xW”xH” 25.5*19.5*8.25 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities ... morewhere item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. DO NOT bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT MILPI
|
|
|
JDS UNIPHASE CYONICS LASER POWER SUPPLY 2101-25ML 20AMP,115VAC, 50/60Hz
CLEAN USED WORKING JDS UNIPHASE CYONICS LASER POWER SUPPLY MODEL 2101-25ML.20AMP 115VAC SIGNAL PHASE 50/60 HERTZ. BUYER TO ADD $20 FOR UPS SHIPPING TO LOWER 48 STATES. SHELF:BILL-F-1 SCOTT
|
|
|
Spectra Physics171 ION Laser System including 270 Exciter power supply
This is a ION LASER from Spectra Physics model 171 with the Power Supply Spectra Physics 270 Exciter it is in good working condition it was tested. Power cables are included. They are both in crates waiting to be shipped you will need to make the shipping arrangements i can and will deliver these up to 20 miles away for free any thing after that we will need to negotiate
|
|
|
Omnichrome 160 220V Argon Ion Laser Power Supply
Omnichrome 160 220V Argon Ion Laser Power Supply Up for auction is a used Omnichrome 160 220V Argon Ion Laser Power Supply. This item is in good cosmetic condition with some minor wear including scuff marks and scratches. The function buttons and connections are in good condition. Please refer to the photos below for more details on the item. This item was wired up and powered on properly. The red power light came on. We were able to turn the power key properly as well. We are unable to test this item beyond powering on and the item will be sold as is. This item does include two keys. This item will need an electric plug. Thank You. Good Luck, and Happy Bidding! ATTENTION INTERNATIONAL BIDDERS: Import duties. Taxes, and Customs charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please ... morecheck with your country's customs office to determine what these additional costs will be prior to bidding or buying. It is illegal to falsify customs documentation by changing the value or marking items sold as"gift" We will not accommodate any such requests. Quick Stop Auctions. Inc. Feel free to ask questions via email or(540)381-3011
|
|
|
Lightwave 125/126 Laser Power Supply 125/6-OPN-PS POWERSUPPLY Lazer Key/Lock
Powers Up. Comes with Locking Key Lightwave 125/126 Laser Power Supply 125/6-OPN-PS.
|
|
|
Laser Drive 9480-01 Argon Power Supply w/ Spectra Physics 361C Remote Control
Laser Drive 9480-01 Argon Power Supply w/ Spectra Physics 361C Remote Control Laser Drive 9480-01 Argon Power Supply w/ Spectra Physics 361C Remote Control. Serial#s 040225752& 8L4254C: This auction consists of a pre-owned Laser Drive 9480-01 Argon Power Supply w/ Spectra Physics 361C Remote Control which are in good physical condition. Both the Laser Drive 9480-01 Argon Power Supply& Remote Control have some features. Controls, connections, mechanisms, devices contained on their front sides. These features, controls, connections, devices, mechanisms contained on the Laser Drive 9480-01 Argon Power Supply w/ Spectra Physics 361C Remote Control can be viewed in one of the included photographs. The seller advises all potential bidders to view the photos provided in this auction listing in order to develop an inventory of the features, ... morecontrols, connections, other components which are contained on the Laser Drive 9480-01 Argon Power Supply& Spectra Physics 361C Remote Control. This Auction Includes: The Laser Drive 9480-01 Argon Power Supply. The Spectra Physics 361C Remote Control, 2 Sets of Keys(which are installed in a lock device on both the Remote Control& the Power Supply. Testing Completed With The Laser Drive 9480-01 Argon Power Supply& Spectra Physics 361C Remote Control: The seller does not have the means or the expertise to install the Laser Drive 9480-01 Argon Power Supply w/ Spectra Physics 361C Remote Control& test them in an in depth manner. He has only completed a test regarding their simple ability to power up. The seller plugged in the Laser Drive 9480-01 Argon Power Supply with a compatible power cable(this power cable is NOT included in this auction) activated it with the power switch. Both the Laser Drive 9480-01 Argon Power Supply& Spectra Physics 361C Remote Control powered up immediately& an indicator light on each component illuminated in a bright fashion. This power test is the extent of the testing the seller has completed with the Laser Drive 9480-01 Argon
|
|
|
ABI 3130 3130XL 3730 3730XL laser power supply (JDSU or Showa)
Must trade-in. Picture for reference only. Not the actual item you will get. Showa or JDSU laser power supply. I have one each in stock. Either u sed or repaired laser power. Shipping time is after receiving your trade-in. Trade-in must be in good physical condition that is repairable.
|
|
|
Working MELLES GRIOT HE NE Laser Power Supply 05-LPL-901-045
WORKING MELLES GRIOT HE-NE GAS LASER POWER SUPPLY MANUFACTURER: MELLES GRIOT# 05-LPL-901-045 INPUT: 115/230 VAC OUTPUT KVDC: 1.45-2.05 MA: 4.5 wMAX: 13 HZ: 50-400 LISTING INCLUDES: 1) NE HE GAS LASER Power Supply only. PLEASE feel free to make a reasonable offer( NO low-balling! if you are interested. Thank You. WARRANTY/GUARANTEE: 14 Day Guarantee that item is as described ONLY. Terms& Conditions: By Clicking on the“ Buy It Now. Bid Now. Accept Offer and/or by Submitting/Making an offer” Y ou are agreeing to be legally bound by these terms. Which shall take effect immediately, If you do not agree to be legally bound by all the following terms please do not Click on the“ Buy It Now. Bid Now. Accept Offer and/or by Submitting/Making an offer” link(s) If you have any questions not answered here. Please ask your question using the"Ask ... morea question" link located near the bottom of the items page, Before Purchase! I am a one person. With a family in which one is handicapped and needs my constant attention. With that in mind, Please understand that I will answer all inquiries in the most timely manner as I possibly can. All items must be paid within 3 days or an unpaid item dispute will open. Address Information: Buyer must have correct shipping information upon payment. I use the shipping address provided to me on the PayPal email. It is the responsibility of the BUYER to ensure that the address listed on their account is current and correct. I will not accept responsibility for a shipment being sent to the wrong address. If the buyer provides an incorrect address on their PayPal account. PLEASE update your account address before bidding and do not send notes, emails, etc expecting me to correct the address that is provided on your account. Shipping: Item will be shipped once payment is cleared and it normally takes 7-10 business days for Packing and shipping carrier to deliver after it leaves the warehouse. Tracking# will be entered on EBAY& Message sent to buyer. Once item is shipped. Handling Cha
|
|
|
Jodon PS-12 Hene Laser Power Supply. Condition Unknown.
For sale is a Jodon PS-12 Hene Laser Power Supply. It's Condition is Unknown. I'd plug it in but it is missing the fuse and fuse cap. I'm selling this as is.
|
|
|
Melles Griot 25-LHP-213-249 Laser Power Supply with Keys / Interlock Dongle
This Ebay listing is for ONE Melles Griot 25-LHP-213-249 Laser Power Supply with 2 keys and interlock dongle. Used and in perfect working order. Comes as shown and described with 1x AC power cord. We will give it our 90 day No DOA warranty! The winning bidder pays $6 S/H/INS in the US(Lower 48 States) via USPS Priority mail. It ships the next business day with tracking number provided. Bid with confidence at esoteric specialties!
|
|
|
KIMMON IK4151R-C-H He-Cd LASER 442nm 25mW w/ IM120C POWER SUPPLY (#961)
KIMMON IK4151R-C-H He-Cd LASER 442nm 25mW POWER SUPPLY IM120C 220VAC Used 3817 Hours Used Working We ship FAST via DHL or EMS worldwide This item comes with a 30 day warranty!
|
|
|
CO2 Dynamic 80W Laser Coherent Model 44 w/Power Supply and Gas Control L482a
Used Dynamically Gas Fed CO2 Laser. Coherent Model 44. 80 watt output at infrared 10.6 microns, S/N: 44-524, with Power Supply and Gas Control Unit. It requires N2, CO2 and He gases, as well as water coolant and 220V 25A power supply. The laser is fully operational to be used by a laser trained professional. Due to the fact that we have not recently tested and calibrated the laser, it is sold as is. L482) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for ... moredifferent research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these c
|
|
|
US/Control Laser Model 258T 1.06 micron YAG 150W laser w/power Supply L483a
Used Holobeam Laser/Control Laser/US Laser Corp. Model 258T Nd:YAG 1.06 micron laser(S/N: 90184) on 5 ft. Optical Table. Emergent beam size: 1.6 mm2. Max Average Output: 150 Watt, with power supply: 240V, 3φ, 50/60 Hz, 35A. The laser is fully operational to be used by a laser trained professional. Due to the fact that we have not recently tested and calibrated the laser, it is sold as is. L483) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different ... moreresearch and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is
|
|
|
Kimmon KR1801C HE-Cd Laser Power Supply
Kimmon KR1801C HE-Cd Laser Power Supply Item Condition: Used Quantity: 1 Unit Cosmetic Condition: No power on missing keys. Some scratces Functionality: Remarks: Actual Weight: 7.2Kg Dimension: 41x31x17- Comes with 14 days money back guarantee. We always strive to ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 140644-ACS. BFWAREHOUSE-B2166(1) UNQ123 =================================================================================================================== TERMS AND CONDITIONS ... moreON EACH SALE WARRANTY: All NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you badly need the item and customs charges will not be a problem, we can still ship via DHL. If you want the item sh
|
|
|
Zygo 7702 Laser 6mm Head 8070-0102-05 & ZMI LH Power Supply 8010-0104 / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Zygo 7702 Laser 6mm Head 8070-0102-05& ZMI LH Power Supply 8010-0104/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. We don't accept PayPal for this item Item Description Zygo 7702 Laser 6mm Head 8070-0102-05& ZMI LH Power Supply 8010-0104/ Warranty We don't accept PayPal for this item Used Condition Zygo ZMI Series Laser Head with Power Supply Zygo Model 7702 Laser Head Part No. 8070-0102-05 Serial No. 99-21-F395 Output Power: 400uW Beam Size: 6mm Mfg Date: June 1999 With Zygo ZMI LH Power Supply Part No. 8010-0104-01 Serial No. 99-51-004 Voltage: 90V/264V. 47/63 Hz, 100W Mfg Date: ... moreDec 1999 Note: Cables not included. Please bid accordingly Inventory Number: 16C82840-09-14 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction
|
|
|
COHERENT MINI G LASER POWER SUPPLY & LASER
COHERENT MINI G LASER POWER SUPPLY& LASER Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description Used.Power supply does power up but I cannot get the laser itself to come on. Sold on an"as is" basis.No warranty.No returns accepted. Any reapirs are the sole responsibility of the buyer. By bidding you are agreeing to these terms. Sorry no instruction manual or other accessories. Cosmetically clean with minor scuffs and scratches. PLEASE CLICK ON THE PICTURES TO GET A LARGER MORE DETAILED VIEW OF THE ITEM. We do our best to describe all items to the best of our ability.Please do not assume that accessories that are not shown are present or the condition of the item is other than described or pictured.Any questions please feel free to ask. Payment ... moreand Shipping PAYMENT TERMS: Payment must be received within 3 days of the closing. Item will be re-listed after this period if I have not heard from the buyer. SHIPPING TERMS: We ship via FedEx ground or USPS whichever is more economical to the lower 48 states.At this time we are not offering our items to residents in Hawaii or Alaska.Items normally ship in 3 days or less once payment is made. inkfrog terapeak. I000000.
|
|
|
Potomac Photonics Ultraviolet Waveguide Laser Dual GX-1000 w/ Power Supply
Potomac Photonics Ultraviolet Waveguide Laser Dual GX-1000 w/ Power Supply Description: PLEASE READ BEFORE PURCHASING ASK ALL QUESTIONS BEFORE PURCHASING TO AVOID ANY CONFUSION. Please contact me at 515 707 8120. Please do not use email to contact me. Ebay messages or phone only. EXACTLY what is pictured is included. If it is not pictured. Assume it is not included. IF YOU RECEIVE YOUR ITEM AND IT IS NOT TO YOUR 100 PERCENT SATISFACTION. CONTACT US BEFORE LEAVING FEEDBACK! We strive to make sure every transaction a positive one! CONDITION OF ITEM IN THIS LISTING IS:2 Unit was purchased from a local university lab and is in good working condition. The item condition numbers and their definitions are below: 1. NEW 2. I guarantee this item to fully work or I will send you a full refund within seven days of you receiving the item. 3. I guarantee ... morethis item to power on. I have not tested the functionality of this item. If it does not power up. I will send you a full refund. Beyond that, no refunds will be offered. 4. Unable to test due to lack of knowledge or inappropriate power source. This item is sold AS-IS with no guarantees or refunds offered. 5. Failed to power up or testing and is being sold for parts. This item is sold AS-IS with no guarantees or refunds offered"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1493f5b04ae-0x116-
|
|
|
Spectra-Physics Rotary Laser Level SL Model 942 In Case & Power Supply
Used spectra-physics rotary laser level. Model#942 in case. Case scratched up, and few scratches on level itself, see photo. Also comes with power supply box. Serial#4925. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-1494256cf9a-0x10c-
|
|
|
For Parts, not working Coherent DEOS D1000 RF Laser Power Supply.
This listing is for a business acquaintance in Reading. PA 19607 and not being shipped from Los Alamos 87544. Questions? Send your name and phone number to me and they will be forwarded to the owner of this item. Description: Coherent DEOS D1000 Radio Frequency laser power supply. Fits any DEOS laser to maximum size. Does not work. When powered on. Nothing happens. Looks old and not working. No cables. No documentation. No returns. Sold As Is.
|
|
|
ROFIN C02 LASER COSEL G2W G SERIES CNC POWER SUPPLY 12VO 12V0 6A
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDULENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS ... moreTHRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION WE JUST STRIPPED A ROFIN C02 LASER RS-500 RS-700 RS-1200 RS-1500 MACHINE WE WILL SEPARATE IF YOU SEE SOMETHING YOU WOULD LIKE TO BUY TO SEE ALL PARTS FROM THIS MACHINE PLEASE PLEASE CALL IF YOU NEED OTHER PARTS FOR IT. ROFIN C02 LASER RS-500 RS-700 RS-1200 RS-1500 PALLET 1 ~BK 6/5/14 CALIFORNIA BUYERS TO PAY 9% SALES TAX SHIPPING& HANDLING: INTERNATIONAL AND EXPEDITED SHIPPING AVAILABLE PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 298-9685 or by e-mail. TERM
|
|
|
POWER SUPPLY FOR HELIUM NEON LASER HIGH VOLTAGE BIN#55
POWER SUPPLY FOR HELIUM NEON LASER HIGH VOLTAGE BIN#55 Sold as is. Thanks.
|
|
|
Laser power supply, 115V, 2104-10SL, Cyonics Uniphase
This is a used laser power supply made by Cyonics(Uniphase) Model 2104-10LS. 115 VAC, 20 amps, Keyed laser on switch, Specifications: MFG: Cyonics, Model: 2104-10LS, Serial: Volts: 115, Amps: Phase: 1, Drive: Controls: Manuals: Air: Weight: 13 Lbs, Condition: Used, Length: 13 Width: 6.5, Height: 5.5, All dims inches unless otherwise noted, Inventory# 5605 For more information call 610-286-1655. Please call or email for shipping rates. International purchases: A $40 documentation processing fee will be added to total purchase for items under $150. When communicating with us please use your own email address or call 610-286-1655. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send emails to heritageequipment AT gmail.com The new ebay buyer protection program has ... moreinspired us to offer all of our items“as-is” This does not mean that you are buying a machine with deficiencies. Known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment. As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine. Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment. The very few times we hav
|
|
|
Melles Griot 05-LPL-900-045 Laser Power Supply with keys, used working condition
Melles Griot 05-LPL-900-045 Laser Power Supply with keys*used. Working in excellent cosmetic condition.
|
|
|
Matisse Titanium Sapphire Laser & Wave Train Frequency Doubler & Power Supply
The company is dismantling the lab and this equipment has become available. I am not the owner. But can obtain additional information and answers to questions from the qualified owners and technicians who are familiar with this item. What is up for auction is: 1. Matisse Brand Titanium Sapphire Laser(Part of a Spectrum Physics System) o Model# Matisse DS o Manufactured April 2008 Picture#1 is th e Laser Picture#2 is th e Wave Train Frequency Doubler(with the cover off) 2. Spectrum Physics Wave Train Frequency Doubler o S/N# SC1190708 o Manufactured March 2008 3. Power Supply and Accessories for the Laser These items are located in Beverly. MA and are available only for pick-up. Interested parties should inquire and possibly bid and we can take it from there. Units are available for on site inspection. Thanks for looking. `4`.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14960d6a075-0x112-
|
|
|
TESTED SYNRAD RF-3000 CO2 LASER POWER SUPPLY ~ REPLACEMENT UNIT
Synrad RF-3000 Power Supply Replacement Unit Tested Just Hours Ago Using a Synrad Evolution 125(note- laser is NOT included) Tested Over 140 Watts On an Ophir Laser Power Meter Which is Correctly Calibrated! NOTE: Photo shows that the cover is off but it is now on and is included with it ~ Cover was taken off to blow any dust out and to clean the fans. Payment and Shipping Terms: Buyer must make contact within 24 hours of auction end to arrange payment and shipping. Payment must be received within 4 days of auction closing. Free insured ground shipping anywhere in the 48 contiguous states ~ if shipping elsewhere. Buyer pays actual insured shipping. Accepted Forms of Payment Within the 50 US States: COMPANY CHECK. CASHIERS CHECK, MASTERCARD, VISA, BANK WIRE TRANSFER Accepted Forms of International Payment(anywhere outside the 50 US states) ... moreBANK TO BANK WIRE TRANSFER- No Exceptions*Items Subject To Walk In Sale*
|
|
|
IPG YTTERBIUM FIBER LASER-POWER SUPPLY/CONTROLLER
AS SHOWN IN THE PICS.A USED,UNTESTED,AS-IS,WHERE IS IPG YTTERBIUM FIBER LASER MODULE POWER SUPPLY.UNIT POWERS ON,HAS ERROR THAT THE LASER ISNT PLUGGED INTO IT. SELLING AS-IS,WHERE IS,FOR PARTS OR REFURB.SHIPPING TO THE 48 STATES ONLY,PAYMENT DUE WITHIN 7 DAYS OF BID CLOSE,PLEASE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1496b8885cc-0x108-
|
|
|
LOT. TDK 60A Laser power supply, high power laser 808nm, crystals, optics. SALE.
Here for sale my laser hobby. SALE. Lot includes: One great and rare TDK VAX06-60RS regulated CC CV power supply. Output 6V max. 60A. Works fine. Any country input voltage. GUC One laser diode. Probably 30.40w, 808nm(tested for green lasing) Tested in 40 Amperes. GWC. Burns. Mounted in base from B&W TEK laser and screwed to huge aluminium heatsink. Also I put(all what I can find) other details for this laser housing(look pictures) Lost one gum ring and all screws. One unknown exotic IR laser with 10mm wide single emitter. Tested with 10A. Working. From numbered picture: 1. Laser shutter. Aperture 6mm, driving voltage 12V. Has a switches to know a position. GWC. 2. Two pair of glass focusing IR 808nm lenses. Taken from B&W TEK laser 473nm. EUC. 3. Pair of glass anamorphic prism coated for 808nm from B&W TEK laser. Using for beam ... morecorrection. EUC. 4. Crystal from 593.5nm laser pointer 2x2x10mm. Bad coating + output laser mirror in GUC. 5. Two rare one-side metallized TEC. 30x30x3mm. Takes 1.4A at 6V. I think can much more. GUC. 6. 15x15 small TEC glued in aluminium alloy base. GUC. 7. DC/DC converter. 9 Amperes. Regulated output. Type = PT6601D 8. ND:YAG crystal 2x2x12mm. Coated for transmission 1064nm. Was tested. Working. EUC. 9. ND:YVO4 from 593.5nm laser pointer. Approx 3x3x2mm. GUC. 10. Pair of high quality cylindrical lenses. One frameless(plano-concave) 15x25mm. One glued in anodized aluminium frame(plano-convex) same size. EUC, like new. Was used in IR device. 11. EREM 776E cutters. Very sharp. Length 105mm, blade 9mm. 12. 0.5 mm thick STAEDTLER permanent industrial marker. All that you see in photos. But isn't listed here, isn't on sale! And not included in lot. Please pay via PayPal within 3 days after end of auction or contact me for details. Please look carefully pictures. All sales are final. AS IS. NO returns NO refunds. The buyer pays item and shipping cost. The buyer pays all import duties. I will ship internationally via AIRMAIL PARCEL SERVICE($90 anywhere in the world) Thanks fo
|
|
|
D18B9 Reo Electro Optics Model LPS Voltex Laser Power Supply S-22-LI
Reo Electro Optics Model LPS Voltex Laser Power Supply S-22-LI DESCRIPTION Item was pulled from a working environment and has been tested here for power. We are unable to test the item here for full functionality. Item is in cosmetic condition with normal wear from every day use. Including minor scratching and/or scuffing, as pictured. AUCTION INCLUDES Reo Electro Optics Model LPS Voltex Laser Power Supply S-22-LI. Power Cord. Keys AUCTION DOES NOT INCLUDE Original Packaging. Manual WARRANTY INFORMATION 14 Day Hassle-Free Warranty CONTACT US Store hours: Monday- Friday 7AM- 4PM Central Time Closed: Saturday& Sunday. We are also closed on holidays. Address: 11543 S. Memorial Parkway Huntsville. AL 35803 Phone Number: 256-650-6223 ext. 2 PAYMENT We accept PayPal and eCheck payments only. SHIPPING We ship within three business days from ... morethe day of your cleared payment. Most items are shipped within one business day of cleared payment. Once your item has shipped the tracking information will be available in your eBay account. We only ship within the 48 contiguous states. And we only ship to confirmed paypal addresses. WARRANTY 14 Day Hassle-Free Warranty Buyer pays return shipping. Please contact us should you have any issues. We will be happy to work with you to your satisfaction and can often resolve issues without the need to return the item. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-149771bbb17-0x110-
|
|
|
Coherent Innova I90C-4 Argon Ion Laser +Controller 90C Power Supply LaserPure 5!
Coherent Innova I90C-4 Argon Ion Laser w/Controller. 90C Power Supply and LaserPure 5 Chiller/Circulator Manufacturer date of 1999/2000 This was pulled from a FLIPR microplate reader and looks like it's in great condition. The cord was hard wired(208v 3Ø) So we have no way to test it. We will offer a warranty with the understanding that the laser may need to be charged or calibrated before use. Save a few bucks on a sweet laser! Includes: I90C-4 Laser Head I90C controller(0169-628-03A) 90C Power Supply w/keys Connecting cables as pictured LaserPure 5 Chiller/Circulator(Model LP-51) Terms of Sale Buyer pays shipping from 55107 by dock truck. Paypal usually ships within 24 hours. Crating is available for an extra $100. International bidders are welcome to email for a shipping quote. Please be aware that it may take 24- 48 hours to ... morereturn a shipping quote. Thanks for your interest. Please email with any questions
|
|
|
40W Carbon Dioxide CO2 Laser Tube and Power Supply
40 watt carbon dioxide laser tube and 110VAC power supply. The power supply is wired and ready to go. Attach the red. High voltage wire to the HR mirror end of the tube and the white ground return wire to the OC mirror end of the tube, plug in the power supply and you are ready to go. Add cooling water to the tube water inlet using a sink tap or chilled water supply(fish tank pumps work great) Start the water flow, press the red button on the power supply and a 40 watt beam emerges. WARNING: CLASS IV LASER SYSTEM Carbon dioxide lasers emit an invisible beam at 10600nm. They will readily burn most organic materials such as clothing and skin. Specular reflections are relatively rare in CO2 lasers due to the wavelength but a direct hit to the eye will burn the cornea and lens of the eye resulting in cataract. Eye protection is highly recommended.
|
|
|
Helium Neon (HeNe) Red Laser head and Power Supply
This is an unmarked red helium neon(HeNe) laser head. And an unmarked power supply. Both are in good condition, and fully functional. Laser is housed in a machined aluminum tube with shutter that will cut off the laser beam without removing power. The power supply runs from 115 volts AC. I would suspect that the laser output is less than 10mw, but this is not confirmed. This unit would be good for a science project, or other experimentation. CONDITIONS OF SALE: 1. Buyer to pay shipping charge of $15.00. only to areas of the United States or its processions served by the USPS) Any other shipping service chosen by the buyer will incur actual shipping costs. Shipping to AK or HI might be higher, and no International sales or shipments will be made. Fed Ex ground shipping will be used for heavier or larger items, and the same terms apply. 2. ... morePayment for auction must be received no later than 5 days following the auction closing unless seller is contacted and other arrangements are made. After 5 days, it will be turned over to the Ebay Resolution center to be treated as a“non-payment for goods” matter. 3. All items sold“as-is” and no return. 4. By bidding on this auction, or using“buy it now” if applicable, you are agreeing with these conditions of sale. Thanks. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14999b5241f-0x10d-
|
|
|
Uniphase Red Helium Neon (HeNe) Laser and Hughes Power Supply
This is a used Uniphase model 1125-1133 red helium neon laser head. The power output of the tube is stated to be 10mw. But is likely less, and has not been tested for power output. Also included is a used Hughes Instruments model 437LF4 laser power supply that runs off of 115/230 VAC. Laser head is housed in a machined aluminum tube, and has a shutter to cut off the beam without removing power. Both units are functional as can be seen in the photos. Physical condition is good. There may be some scuffs, scratches, and old label residue present on the tube housing and power supply, but neither affects function. This would make a good science project, or for lab experiments. CONDITIONS OF SALE: 1. Buyer to pay shipping charge of $15.00. only to areas of the United States or its processions served by the USPS) Any other shipping service chosen ... moreby the buyer will incur actual shipping costs. Shipping to AK or HI might be higher, and no International sales or shipments will be made. Fed Ex ground shipping will be used for heavier or larger items, and the same terms apply. 2. Payment for auction must be received no later than 5 days following the auction closing unless seller is contacted and other arrangements are made. After 5 days, it will be turned over to the Ebay Resolution center to be treated as a“non-payment for goods” matter. 3. All items sold“as-is” and no return. 4. By bidding on this auction, or using“buy it now” if applicable, you are agreeing with these conditions of sale. Thanks.
|
|
|
Melles Griot Helium Neon (HeNe) red laser and power supply
This is a used Melles Griot red helium neon laser head. And Melles Griot 05-LPM-917-065 power supply. The power supply runs off of 115/230 volts AC. It also requires application of a +5vdc source to the TTL leads of the power supply to turn on the laser tube. This can be done with any low current 5vdc source. For test purposes I used two 3 volt lithium batteries as the voltage source, and this worked fine. Power output of the laser tube is unknown, and most likely under 10mw. The laser tube housing is made from machined aluminum, and has a shutter to turn off the beam if power remains connected. The unit is fully functional. Overall condition of the units are good, and other than some scuffs, physically it is very clean. There is some label residue on the tube housing, and a couple of scuffs on the power supply, which appears to have never ... morebeen installed judging by the way the power supply leads were coiled, and full length. This should be useful for experimentation in your lab or for a science project. CONDITIONS OF SALE: 1. Buyer to pay shipping charge of $15.00. only to areas of the United States or its processions served by the USPS) Any other shipping service chosen by the buyer will incur actual shipping costs. Shipping to AK or HI might be higher, and no International sales or shipments will be made. Fed Ex ground shipping will be used for heavier or larger items, and the same terms apply. 2. Payment for auction must be received no later than 5 days following the auction closing unless seller is contacted and other arrangements are made. After 5 days, it will be turned over to the Ebay Resolution center to be treated as a“non-payment for goods” matter. 3. All items sold“as-is” and no return. 4. By bidding on this auction, or using“buy it now” if applicable, you are agreeing with these conditions of sale. Thanks. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14999b5245f-0x101-
|
|
|
Gravograph CO2 laser engraver LS200 LS series 48V DC power supply
Gravograph CO2 laser engraver LS200 LS series 48V DC power supply This listing is for a business acquaintance in Reading. PA 19607 and not being shipped from Los Alamos 87544. Gravograph LS Series laser engraving machine 48 volt DC power supply. Fully tested. Gravograph SQ488-1F-48. Input voltage 90-264 volts 50/60 Hz 7A. Power control system. Power Supply Unit. Provides stablized DC voltage to your Gravograph laser cutting machine.
|
|
|
Helium Neon / HeNe Laser Power Supply, Desktop or Lab by Hughes / Laser Drive
This is a desktop or lab power supply for a helium neon(HeNe) laser. It may be useable for other laser tubes as well. It is marked Hughes Aircraft Company. But is made by Laser Drive. It is a working power supply, and is in very good physical condition. I do not have a key to go with this supply, but unit was tested with another key that I have with another power supply. I had planned on changing out the key switch for a toggle switch, and this would be an easy fix. The switch jack on the back of the power supply is probably jumpered internally, as it is not needed in order to activate the HV output. I have other supplies that require that a momentary switch be plugged into the jack, but not in this case. CONDITIONS OF SALE: 1. Buyer to pay shipping charge of $13.00. only to areas of the United States or its processions served by the USPS) ... moreAny other shipping service chosen by the buyer will incur actual shipping costs. Shipping to AK or HI might be higher, and no International sales or shipments will be made. Fed Ex ground shipping will be used for heavier or larger items, and the same terms apply. 2. Payment for auction must be received no later than 5 days following the auction closing unless seller is contacted and other arrangements are made. After 5 days, it will be turned over to the Ebay Resolution center to be treated as a“non-payment for goods” matter. 3. All items sold“as-is” and no return. 4. By bidding on this auction, or using“buy it now” if applicable, you are agreeing with these conditions of sale. Thanks.
|
|
|
Canadian Instrumentation & Research Stabilized Laser Diode Power Supply 902
Canadian Instrumentation and Research Stabilized Laser Diode Power Supply model 902 in good condition. Marks. Scuff marks, and scratches noted. Previous owners name is written in black on the top panel. Total functionality is unknown. Sold"AS IS" untested. Please look at the images provided for overall condition and wear. Buyer agrees to pay an additional cost(based on location) for shipping and Insurance anywhere in the U.S. Cashiers Checks. And PayPal ONLY please, payable in U.S. dollars. Thanks for bidding/buying and good luck.
|
|
|
COHERENT LASER POWER SUPPLY CR90-115 115/230 VAC 1700/2450 VDC output
Hi: For sale or"best offer" Used solid state"Coherent" CR90-115 laser power supply. P/N 0155-942-00. Input: 115/230 VAC@120/60mA Output: 1700/2450 VDC@5.25/6.5mA Currently wired for 115 VAC with inline power switch. Tested and has high voltage output. Unable to check actual voltage output. Came from the laser research/teaching department of a large& very well funded University here in Ohio. Please feel free to send your"best offers" I have a history of accepting"reasonable" best offers. Flat rate shipping applies to continential US purchases only. Thanks for looking.
|
|
|
SPECTRA-PHYSICS EXPLORER 349NM Q-SWITCHED LASER PS-L08-S-196 POWER SUPPLY *2011*
SPECTRA-PHYSICS/ NEWPORT EXPLORER 349NM Q-SWITCHED DPSS LASER PS-L08-S-196 POWER SUPPLY*2011* Unit's Specifics Make: Spectra-Physics Model: Explorer 349nm Q-Switched DPSS Laser System Power Supply Part No. PS-L08-S-196 Date: April 2011 Note: Includes all/only components/items shown(Does not include the keys for keyswitch) Description This unit is used and is in clean. Excellent physical condition. The warranty seals are intact. We've listed the unit under the"For parts or not working" category as we do not have any means to test the unit. And hence we are selling it on an"AS IS BASIS" Shipping We ship worldwide. Please email us for a shipping quote My Store | Follow us on Twitter for Real-Time Inventory Updates | Contact Us
|
|
|
Topcon Laser Level LTS-3, Case, Laser, Laser Power Supply, Vintage 1986
This is a listing for a Topcon Laser Level LTS-3. Case, Laser, Laser Power Supply, Vintage 1986 This includes the following: Topcon Laser Level LTS-3 Case Laser Laser Power Supply All Vintage 1986 Description: This is a Topcon Laser Level LTS-3. Case, Laser, Laser Power Supply, Vintage 1986 in excellent condition. The laser powers on and seems to work fine. Information: Not much available on the web about this. I am guessing it's because of the age of the unit. You can see a picture of this on the on the Topcon web site showing vintage products. This ships free in the USA. If you receive your item and it is not to your 100 Percent Satisfaction. Please contact us before leaving feedback. I strive to make sure every transaction is a positive one! I wanted to reach out and let you know that eBay is changing the way Sellers are rated. I am ... morenot overjoyed with what's happening. But I have to roll with it. IF you have a problem with my item, I would like you to use the"Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved. I stand behind my items and will work out any problems that you may have with an item. So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication. International Buyers. Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
This is a Dry view 8700 Laser Imager Power supply
View my Other Auctions EMAILS answered M-F 8-5 MST SHIPPING TERMS: We use UPS ground service for delivery in the lower 48 states. International customers We use USPS Priority for international delivery. International customers click here for shipping guidelines Shipping fees listed on all auctions via cost calculator for international and domestic. All packaged items include 2" of bubblewrap and/or foam if applicable. Freight Delivery: In Most cases. We will pelletize for free. Any crating would be subcontracted. We have forklift loading. We also have local pick up. For larger, heavier items customer is required to make arrangements. We can also get a freight quote for you. And/or ship on your account. If you have any questions about our freight shipment guidelines. Or to get a quote don't hesitate to contact us. Returns Policy: ... moreitems sold"as is" have no return. No warranty& no guarantee. AS IS items are not covered by return policy. These sales are final. Southwest Liquidators does not warranty the item in AS-IS auction/store in any way. No refunds. These statements maybe used as an evidence for PayPal dispute or chargeback. DOA means dead on arrival For items with a guarantee. no guarantee unless stated otherwise) items must be returned within 15 days Item must be in original shipped condition(not modified. Not missing parts) Contact us before returning any items Items that are returned more than 15 days after delivery will receive No refund. Buyer is responsible for return shipping charges if applicable. Shipping charges are directly quoted from the shipping company. Please consider these costs when intending to purchase an item. We sell mostly USED Industrial Equipment. Please email us with any questions or if the description is unclear to you. This is a Dry view 8700 Laser Imager Power supply. We pull this item from a good working Dry view 8700 Laser Imager. This Dry view 8700 Laser Imager is in good working condition. We used to part all of the big item for parts because we run out of
|
|
|
Conoptics M25DS Laser Modulator / Power Supply
Conoptics M25DS Laser Modulator/ Power Supply SHIPPING NOTICE: We offer several shipping options. Including FedEx Overnight. To see your different options, please click on the"Shipping and Payments" tab. Conoptics M25DS Laser Modulator/ Power Supply Used and in good condition. This unit is very clean and in nice cosmetic condition also. It powers on and the fan runs. I can select meter 1 or 2 and am able to adjust the voltage with the bias control knobs. I am not able to test it further. It does not come with any cables or accessories. It only comes with what is shown in the pictures. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day ... morewarranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about this, please contact us prior to purchasing. sg 3-3-3.
|
|
|
Lasos 100mW Krypton Ion lab Laser and power supply 110VAC input
Lasos 100mW Krypton Ion lab Laser and power supply 110VAC input Do not have key or AC power cord. Power cord uses horizontal contacts. See image. Power contact IEC320-620 Mate IEC320-619 Sold"as-is" but is in excellent physical condition. Laser and supply are 30lbs. Shipping is $100.00. in N. America
|
|
|
2 watt Coherent Enterprise UV ION laser AS IS power supply water pump
2 watt Coherent Enterprise UV ION laser. Power supply, Spectra-Physics 2550 water pump cooler. Untested and sold as-is but appears to be in good condition physically. Total component's weight is approx 300lbs. Shipping would be $300 in the U.S. and Canada. Freight. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-149bd3a6601-0x100-
|
|
|
melles griot laser 05-LHR-151 power supply 05-LPM-902-065
melles griot laser 05-LHR-151 power supply 05-LPM-902-065 This item appears to work. Power supply works RED laser lights up, have no knowledge about item. Overall condition can be seen in pictures CHUCK 928 566 1105
|
|
|
FANUC C3000 LASER POWER SUPPLY MODEL A14B-0082-B314-01
UP FOR AUCTION IS A NICE USED FANUC C3000 LASER POWER SUPPLY MODEL A14B-0082-B314-01
|
|
|
High Power FAP Laser Diode Power Supply - Xantrex XFR 0-7.5V 0-140A
Variable zero to 7.5 volt up to 140 amps DC power supply. Voltage and current limit adjustable. I will add better pictures later showing the unit turned on. I have been using this power supply but have two of them and need the money, so up for sale it goes. Nothing wrong with this unit other than the normal signs of wear, I will guarantee it. Search under Xantrex XFR 7.5-140 here on ebay and you will see this is the lowest priced offering. One as high as 900 but for an older unit manufactured under the previous company name. 100/120 VAC 47-63 Hz. Note: Girl in the background not included. Comes with power cord.
|
|
|
Kingwin Laser LZ-1000 ATX Modular Power Supply - 1000W, 80 Plus Bronze
Item is in great and working condition. Used for about a year. Still almost like brand new. Comes with the original box. Please ask if you have any questions. I do not ship internationally or to APO/FPO/DPO. Sorry.
|
|
|
Uniphase Laser Power Supply - 1205-1 & Laser 1108P
used works great.
|
|
|
FTIR Midac power supply board HeNe Laser Power supply Laser Drive Inc
Thanks for Looking. Midac FTIR power supply board. Spare parts inventory for FTIR spectrometer. The power supply board output +5. +15, 15, as well as the 12VDC for the laser HeNe Laser power supply is: Model 106-13 12VDC input 1250VDC@ 4.0 MA output 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14a1ef0a395-0x106-
|
|
|
Laser Drive power supply model 106-13 used for HeNe 12VDC input
Thanks for looking. Working Laser Drive Inc. power supply. spare part: new old stock) used for spectrometer for HeNe laser. Model: 106-13 Input: 12VDC Output: 1250VDC@4.0MA
|
|
|
HeNe Laser Melles Griot 05-LPHP-701-88 Power Supply 05-LPM-900-045
Thanks for looking Tested and working. Pulled from unused spectrometer. Laser powers on and is strong. Sold'as is' described by pictures. Model: Melles Griot 05-LHP-701-88 HeNe: 632.8 nm Length 7 3/4 inches. 1 5/16 dia. The power supply is a Melles Griot mfg by Laser Drive Inc. Input: 115/230 VAC Output: 1.10-1.50 KVDC
|
|
|
HE NE Laser Test Jig ADJUSTABLE from 4 3/4"-10" includes Power Supply.
HE NE Laser Test Jig ADJUSTABLE from 4 3/4"10" includes Power Supply. Simply adjust contacts. Insert He Ne Laser Tube& Plug it in! Power Supply: Laser Driver Inc. 006-1013998 INPUT: 115 VAC OUTPUT: DC 1300 Volts MA: 3.5 HZ: 60 LISTING INCLUDES: 1) Adjustable Contacts& Power Supply only. LASER NOT INCLUDED PLEASE feel free to make a reasonable offer( NO low-balling! if you are interested. Thank You. WARRANTY/GUARANTEE: 14 Day Guarantee that item is as described ONLY. Terms& Conditions: By Clicking on the“ Buy It Now. Bid Now. Accept Offer and/or by Submitting/Making an offer” Y ou are agreeing to be legally bound by these terms. Which shall take effect immediately, If you do not agree to be legally bound by all the following terms please do not Click on the“ Buy It Now. Bid Now. Accept Offer and/or by Submitting/Making ... morean offer” link(s) If you have any questions not answered here. Please ask your question using the"Ask a question" link located near the bottom of the items page, Before Purchase! I am a one person. With a family in which one is handicapped and needs my constant attention. With that in mind, Please understand that I will answer all inquiries in the most timely manner as I possibly can. All items must be paid within 3 days or an unpaid item dispute will open. Address Information: Buyer must have correct shipping information upon payment. I use the shipping address provided to me on the PayPal email. It is the responsibility of the BUYER to ensure that the address listed on their account is current and correct. I will not accept responsibility for a shipment being sent to the wrong address. If the buyer provides an incorrect address on their PayPal account. PLEASE update your account address before bidding and do not send notes, emails, etc expecting me to correct the address that is provided on your account. Shipping: Item will be shipped once payment is cleared and it normally takes 7-10 business days for Packing and shipping carrier to deliver after it leaves the ware
|
|
|
Melles Griot 05-LHR-991 RED HeNe laser 632.8nm with power supply
For sale Melles Griot 05-LHR-991 RED HeNe laser 632.8nm with power supply. unit is pull from low hour lab equipment.
|
|
|
COHERENT 31-2772-000 Green HeNe laser 543.5nm with power supply
For sale COHERENT 31-2772-000 Green HeNe laser 543.5nm with power supply. unit is pull from low hour lab equipment.
|
|
|
COHERENT 31-2230-000 Yellow HeNe laser 594.1nm with power supply
For sale COHERENT 31-2230-000 Yellow HeNe laser 594.1nm with power supply. unit is pull from low hour lab equipment.
|
|
|
JDS Uniphase 1201-1 HeNe Laser Power Supply 1700V 4.9mA - Good Working
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- JDS Uniphase 1201-1 HeNe Laser Power Supply 1700V 4.9mA- Good Working(needs interlock plug. Key switch has been removed) Only what is listed above and/or shown in the pictures below are included in this auction. This auction is for a HeNe laser power supply. Unit is rated at 1700V at 4.9mA. Total weight of the unit is about 3 pounds. Used item in good physical and electrical condition. We have powered this unit up with a laser head and it appears to be in good working condition. Units needs an interlock plug(Jones 2-pin) to operate. The key switch has been removed from the unit and the wires joined which makes it operate anytime power is applied. This item is being sold with a 30-day ... morewarranty. Check the shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions: There is no need for us to email you after the auction ends. Simply pay the amount of the winning bid plus the S/H indicated by the shipping calculator for your ZIP code. We do not try to make(or lose) money on our S/H cost. We try to offer quality shipping at a fair price. We use new boxes. Peanuts, and bubble wrap and try to pack our items well(check our feedback) We pack items immediately after auction closing. If you are bidding on multiple items please contact us and we will be happy to combine items if possible to lower cost. This item will be insured for the winning bid amount. Shipping is limited to addresses within the United States(U.S. ONLY. We ship via unless other arrangements are made. Small items may be shipped via USPS. Please contact us about combining items to reduce you
|
|
|
SICK LCU-AM 7022760 Power Supply Safety Relay for Laser Scanner
SICK LCU-AM 7022760 Power Supply Safety Relay for Laser Scanner.
|
|
|
Amray 91118-7-1 Power Supply with Laser Probe
Amray 91118-7-1 Power Supply 30-day Guarantee Actual item pictured Here is an Amray 91118-7-1 Power Supply. Including gun with 12 foot connector, probe and power connector. The power supply is a working unit removed from active service. The power supply is guaranteed to be in proper working order. Please contact us with any questions. ebay@hbelectronics.com(714) 963-9100 Why buy from us? Guarantee. We guarantee our products to be in proper working condition(unless otherwise stated in the listing) There is no need to risk time and money on"as is" items. Experience. We know how to ship delicate electronics safely to your door. Your equipment will be shipped with the protection of 14 years of shipping experience. You can track the progress of your package on-line. And Yes, we ship internationally. Integrity. We do business in honor ... moreand with integrity. We are a legitimate. Licensed company, and a decorated seller since the year 2000. Thank you for choosing
|
|
|
Argon Ion Laser / Cyonics Uniphase / 2201-20SLE / Power Supply / Working / 25mW
Argon Ion Laser/ Cyonics Uniphase/ 2201-20SLE/ Power Supply/ Working/ 25mW Rare. Used but in excellent physical condition/ Tested working/ Power output better than original specifications Argon Ion Laser Head: 2201-15SLB Power Supply: 2102-20SLE Remote Therma-Wave Argon Power Controller Turn Key Operation: Power Supply. Fan, Cable, Interlock Plug, Remote Controller and Key are all Included Factory specification: 15 mW. Single Line, 488nm wavelength Power meter shows better than 25mW of output power! Operating manual can be downloaded here: No scratches or dents on the case. Not Included in this Auction Bid with Confidence- 100% Positive Feedback! g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14a28ca2971-0x107-
|
|
|
JDS UNIPHASE LASER 1108P - 2933 & E-15-00 power supply.
tested. working. what you see in the pictures is what you will receive. ships same day or next business day. returns accepted. questions welcome. thanks for looking!
|
|
|
JDS Uniphase 2214-40MLA 458-515nm Argon-Ion Laser Head +2114B-40MLA Power Supply
Search our eBay Store! JDS Uniphase 2214-40MLA 458-515nm Argon-Ion Laser Head +2114B-40MLA Power Supply SKU: JV-LEV-B-JDS2214ARGION Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge JDS Uniphase 2214-40MLA 458-515nm Argon-Ion Laser Head +2114B-40MLA Power Supply Model: 2214-40MLA(Laser Head) 2114B-40MLA(Power Supply) We were unable to test both the laser and the power supply Unit comes with the 2114B-40MLA Power Supply Power supply comes with its control key Both the laser and power supply have scuff marks. Scratches, and sticker marks All ports and cables are intact Cumulative Dimensions(L" ... morex W" x H" 16 x 11 x 10 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as an 8. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. DO NOT bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation,
|
|
|
5V 15V -15V 10488B Power Supply Adapter For Agilent Laser Interferometer System
10488B Power Adapter For Agilent Laser Interferometer System Note: Used item and Tested Worrking well. I feel look 80% new only. If you care this please do not buy! Item we sale Model: 10488B Power Adapter For Agilent Laser Interferometer System; item include: 10488B Power Adapter For Agilent Laser Interferometer System itself only.No include AC Cable. no include other accessories. This item is USED. We do guarantee this item. COSMETIC CONDITION: some scuffs/scratches For more info you can search in internet. ================== Note: About shipment. All Item ship from China Mainland or HongKong.This is oversea shipping,not local shipping! You can select the shipping ways. If you want get the parcel fast, please select Express Mail. When select Free Shipping.Ship VIA Standard Oversea Air Mail. $10 all country will use Registered Airmail to ... moreship. $25 all countrys we will Fast Express mail to ship. Standard Air mail take 20-40 days Can Not tracking(USA/UK/German will 20-30 days. Other country maybe 25-40 days) Registered Air mail take 20-40 days Can tracking(USA/UK/German will 20-30 day. Other country maybe 25-40 days) Express mail take 5-15 days Can tracking( Asia Country will need 2-7 days. Other country need 7-15 days) Attention: if the holiday or newyear or Xmas the parcel maybe will delay 10-30 days! I hope you can understanding. Thank you for your cooperation. If the parcel lost on it's way. Don't worry, I can re-send you another one or give you full refund.Just contact us ok, do not open any eBay or paypal CASE, that's no sense for our do business together. Thank you your cooperation. If you have any inquiries. Please feel free to Contact us at any time. Have a nice day! Kind regards
|
|
|
Hughes 4000 Series High Voltage Laser Power Supply and Laser
Hughes 4000 Series High Voltage Laser Power Supply And Laser BRAND: Hughes MODEL: 4000 Series. 3209H-C Laser CONDITION: The bottom is missing two feet that are used to prop the device up. T his item has been tested to power on. Due to our inability to test this item further it is being sold AS-IS: For parts or not working. These are being sold AS-IS pictured. Thank you for reading! Jobs Foundation. ABOUT US Our mission is to help economically disadvantaged adults overcome barriers to employment. Jobs are the foundation to becoming financially independent. We create job opportunities for people who want to work. Learn a vocational skill and demonstrate a desire to invest in themselves. Learn more by visiting our. PAYMENT& TAXES We accept PayPal. Visa, MasterCard, and Discover. Payment must be received within 7 business days or an eBay ... moreunpaid item case will be opened and the item may be re-listed. Sales tax is 7.275% for Minnesota residents only. SHIPPING Our shipping services operate Monday-Friday 8am-12pm(CST) Payment received after 12pm(CST) will be shipped out the following business day. Your purchase will be shipped within two business days after payment confirmation Monday-Friday(excluding holidays) via USPS or UPS Ground. We cannot ship to the following: Alaska. Hawaii, Puerto Rico, International or APO's. We ship to the contiguous continental U.S. only. RETURN POLICY Please read: we do not accept returns. However. We warrant the product to be in the condition as described in the eBay listing. If you receive the item and the condition does not match the description, please notify us immediately via eBay messaging, so we can work together to find a suitable solution. Stay up to date on our postings by adding us to your! On Oct-09-14 at 11:31:47 PDT. Seller added the following information:
|
|
|
Melles Griot Ion Laser Power Supply 176B-230B (parts or not working)
Melles Griot Ion Laser Power Supply 176B-230B(parts or not working) For parts or not working: Item for sale is a" Melles Griot Ion Laser Power Supply 176B-230B(parts or not working) This item is in good condition with normal wear(light scuffing. See pictures) The power supply is missing the keys for the on/off/start. Item has not been tested due to lack of equiptment and knowledge, but was pulled from a working enviroment. Item is being SOLD AS IS. Included in Sale: Qty: 1. Melles Griot Ion Laser Power Supply 176B-230B(parts or not working) No reasonable offer refused. Shipping: This unit will securely ship via Fedex Ground within 1-3 business days of confirmed payment. We are able to provide tracking numbers upon request. Please be aware that as this item is being shipped through Fedex. We are unable to ship to P.O. boxes so make sure ... morethat your address in eBay is correct. For our international customers, we are unable to guarantee your package outside of the continental United States; once your package leaves the US, we are unable to offer any refunds or returns. Please be aware of this before making an offer or purchase. Feel free to message us if you have any questions regarding our shipping policies and practices. ATTENTION: If item(s) have not been paid for within 7 days. The invoice will be cancelled and the item(s) can be relisted at any time. If you have any questions feel free to ask. Thanks for Shopping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
argon laser show aurora power supply
for sale is a aurora single phase 220 ion laser power supply used to run a variety of small frame ion lasers from single phase power- will include umbilcal cord which attaches to unit and terminates bare wire to your laser head works great on lexel 95's it was put away working- i believe i have the key- worse case senario you can jumper the keyswitch- i will also include instructions you need to know what your doing with this- if your looking. You probably do- not responsible for fried tubes or misuse- all sales final Posted with
|
|
|
Spectra-Physics Used J40-8S40-18K-09 Laser Power Supply B16E10-106 Laser Head
Specification ITEM Type: Laser Power Supply and head Part Number: J40-8S40-18K-09 + B16E10-106Q-09. The Serial Number and detail number may be different from actual. But the quality of item is almost equal. If you want to review actual item, please contact us freely. Manufacturer: Spectra-Physics Country Of Origin: U.S.A Quantity: 1SET. Condition: Used(keeps good cosmetic condition- this item sold as is) This item removed from working good conditions. Semiconductor machine- ESI. Keeps good cosmetic condition as photo. Please review with the photo. Other stock's condition is almost same. If you want to review other. Contact us freely. This item is not tested. Sold as is. If You Want If you want review actual item then request actual image before buying. Send message. You c an purchase more quanti ty of goods. Please message to us. Actual ... moreitem quantity is more exist. If you have any questions about product or shipping method. Send message us and we will help your business with pleasure. If you have any request about CUSTOMS or shipping method please contact us before purchase. Shipping Notice: We Use shipping address by PAYPAL Information. Also let us know your contact number(phone or mobile number) for accurate delivery. Or you check your shipping address and information before you buy. delivery address and PAYPAL address should same) This item will be shipped via UPS. FEDEX service or e quivalent shipping service(EMS) It usually takes 5 to 10 days to deliver. Sometimes it takes more than usual. Please understand it depends on the customs and carrier of your country. But please don't worry. Most of the time it is delivered on time. we serve to you free shipping service. But you should consider duty, tax, or brokerage charge. If you don't want FEDEX.UPS,DHL shipping, please let us know. UPS. FedEx: North America, Europe. EMS: Commonwealth of Independent States(CIS-Russia. Ukraine… And so on) China France. South America and some county If you want to know exact carrier and delivery time plea
|
|
|
HUGHES SERIES 4000 LASER POWER SUPPLY & 5+ MW HeNe LASER
HUGHES MODEL 4000 LASER POWER SUPPLY& 5+MW HENE LASER This is NOT a toy and must be handled by adults. The auction consists of a Hughes 4000 HeNe laser power supply and a Hughes 5mw red HeNe laser. The power supply gives out in excess of 2000 volts dc and must be handled with care not to open it up. Etc. The laser tube itself is coaxial in design and is approximately 14" long. Generating between 5 mW of laser light. These laser tubes are much better than the small keychain ones, in that only these lasers can be effectively used for Holograms due to their long coherance length. If you want to make holograms, this is what you need! IT IS UNDERSTOOD THAT THIS IS NOT A TOY AND THAT YOU WILL OBSERVE ALL PROPER SAFELY IN HANDLING THIS UNIT. Used. Tested, photos show this fully working. Shipping is $18.00 for FedEx Ground. USA sales and ... moreshipping only. No exceptions. Payment by PayPal as per Ebay rules. I stand by everything I sell. And should something arrive not as it should be- contact me before leaving feedback. I strive to make sure you are happy with your purchase. Check my feedback before you bid. Thank you for your bid. Good luck and best wishes- Bob
|
|
|
C113009 HP 5517B HeNe Laser Head, 10780B & 10780C Receiver, Cables, Power Supply
Click to Enlarge) Product ID# C113009 This lot includes an HP 5517B HeNe Laser Head. Along with a 10793B Cable, a 10780B Receiver, a 10780C Receiver, two 10790A Cables, a Plug-In Card Chassis with ESI Laser Interferometer Boards, and an ESI Auxillary Electronics Power Supply, as shown. These items look to be in good cosmetic condition, showing some minor signs of wear. They power up, as shown in the photos above. However, I lack the knowledge and equipment to formally test them, and they are being sold as-is. Approximate overall unpacked dimensions: 22"L x 19"W x 19"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below ... moreShipping. Buyer pays a fixed shipping and handling fee of 117 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 56 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California and Texas Sales Tax For all California ship-to locations within Santa Clara County
|
|
|
JDS Uniphase JDSU Laser Power Supply 2111P-25MLHCH #S5
JDS Uniphase JDSU Laser Power Supply 2111P-25MLHCH Made by JDS Uniphase. Model Number: 2111P-25MLHCH. Item has been tested to power on. For sale is the item shown in the pictures for this listing. No additional accessories included. This item includes a 30 day warranty. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer ... moreif we can. All sales are final. Please understand that this is an auction/liquidation environment, not a retail store, so make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is n
|
|
|
Melles Griot HeNe Helium-Neon Laser Tube Head 11mW +Uniphase POWER SUPPLY TESTED
You are bidding on HeNe Laser Tube + POWER SUPPLY Laser Made by Melles Griot Laser model: 05-LHP-991. 632.8nm; 11.0 mW. PS made by Uniphase PS input V: 20-24VDC. 22W max. The Unit Is Working GOOD CONDITION See pictures My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders ... moreare always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price does not include V.A.T. Please contact us for shipping + V.A.T. SHIPPING Shipping options: Registered. EMS, UPS, FedEx, DHL Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within up to 3 business days after receiving the payment from the buyer. Register- Buyer usually receive the item within 11-23 business days. EMS- Buyer usually receive the item within 4-8 business days. UPS. FedEx, DHL- Buyer usually receive the item within 2-4 business days. It all depends on the Post office and custom. If you haven't receive your item within 30 bus
|
|
|
Trimble Spectra Precision GL722 Dual Slope Rotating Laser Level, Power Supply
Trimble Spectra Precision GL722 Dual Sloping Laser This Includes: Trimble Spectra Precision GL722 Laser 12 V Power Supply w/ Alligator Clips Charger Carrying Case This does not include a Receiver or Remote. Condition: This is in good working condition and the battery holds a charge. There is a 14 Day Return Policy and 30 Day Warranty to give you time to look at it yourself. Please contact us at 360-571-2346 with any questions. Shipping: We ship Fedex Ground Insured within 1 day on this item. Please specify if you need expedited or specific shipping. There may be extra shipping costs. Payment: We Accept Paypal. Company and certified check, wire transfers and credit cards. We do offer a discount if paid with a check or wire transfer. We also accept trades for partial or full payment, let us know if you want to switch some of your gear around. ... moreReturns: We do accept returns for 14 days. Buyer pays return shipping. Taxes: Washington State sales tax of 8.4% will be charged when item is shipped to Washington Only. Liens: Seller agrees that items being sold are free of all liens and encumbrances. And has full authority to sell. Warranty: 14 Day return policy Disclaimer: By purchasing this equipment the buyer assumes all liability resulting from the use of this equipment whether considered appropriate or inappropriate use of the equipment and will not hold the seller responsible for any failure of the equipment that results in financial and/or bodily harm. About Us: We have 23 years of experience in construction and equipment related fields. Including laser, GPS, machine control, small and large equipment, and tools. We do our best to test whatever we sell, and will usually note that under condition. Please contact us with any questions, we value your business! 19132.
|
|
|
Spectra-Physics 2040-35 Argon Ion Laser Head w/2570 Power Supply +2470 Remote
Search our eBay Store! Spectra-Physics 2040-35 Argon Ion Laser Head w/2570 Power Supply +2470 Remote SKU: JV-LEV-C-SPPH2040ARG Condition: Used Packaging: Pallet/Skid Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Spectra-Physics 2040-35 Argon Ion Laser Head w/2570 Power Supply +2470 Remote Controller Model: 2040-35(Laser Head) 2570(Power Supply) 2470(Remote Controller) Power supply specifications: 3 Phase 13A/ 60 kW Input Operating Mode: Continuous Duty Water Cooling Regulation: 5.0GPM(20LPM) 10C to 35C We were unable to test this unit Unit's 2470 Remote Controller comes with its key Unit's Water In/Water to ... moreHead tubes have been severed off from the Laser Head Unit uses an Appleton ACP1034CD Style 2 Power Connector Laser Head's footing are bent Laser Head's top cover panel is loose and is not screwed in the the base Unit's housing has light scratches/scuff marks Laser Head Dimensions(L" x W" x H" 77 1/2 x 9 1/4 x 8 1/2 Power Supply Dimensions(L" x W" x H"30 x 19 3/4 x 22 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional informat
|
|
|
JDS Uniphase 2211-65MLQYV 458nm Argon-Ion Laser Head +2111-65MLQYV Power Supply
Search our eBay Store! JDS Uniphase 2211-65MLQYV 458nm Argon-Ion Laser Head +2111-65MLQYV Power Supply SKU: JV-LEV-B-UNI221165ML Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge JDS Uniphase 2211-65MLQYV 458nm Argon-Ion Laser Head +2111-65MLQYV Power Supply Model: 2211-65MLQYV/2111-65MLQYV We were unable to test both the laser and power supply Unit comes with a Uniphase 2111-65MLQYV Power Supply Laser unit is missing a top cover/fan attachment Power supply unit comes with control key Both the laser and power supply have scuff marks. Scratches, and sticker marks All ports and cables are ... moreintact upon inspection Collective Dimensions(L" x W" x H" 14 1/2 x 13 3/4 x 10 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. DO NOT bid on this item unless you are an authorized pu
|
|
|
Omnichrome 643R-LICA-B02 Series 43 Ar-Kr Ion Laser Head +171-B Power Supply
Search our eBay Store! Omnichrome 643R-LICA-B02 Series 43 Ar-Kr Ion Laser Head +171-B Power Supply SKU: JV-LEV-B-OMNI643RARKR Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Omnichrome 643R-LICA-B02 Series 43 Ar-Kr Ion Laser Head +171-B Power Supply Model: 643R-LICA-B02/ 171-B This unit's power supply powers on. Indicated by lit LED lights, but we were unable to test its functionality due to a missing control key Unit comes with these 4 components: 1x 643R-LICA-B02 Laser Head 1x 171-B Power Supply(NO KEY) 1x Laser Head to Power Supply Connector 1x SCSI Remote w/ Key We were unable ... moreto test this unit's laser head or connector All of unit's ports and switches are intact upon inspection Unit's remote is in an unassembled/loose form(see image) Unit's housing has light scratches. Scuff marks, and sticker marks Unit does not come with a power cord Collective Dimensions(L" x W" x H" 20 3/5 x 15 4/5 x 7 3/4 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DIS
|
|
|
BERTAN HIGH VOLTAGE POWER SUPPLY KV LASER OPTICS AS IS BIN#54
BERTAN HIGH VOLTAGE POWER SUPPLY KV LASER OPTICS AS IS BIN#54 Sold as is. As pictured. Thanks.
|
|
|
Coherent RF750 AMP CO2 Laser Power Supply for SL400R System High Frequency
Coherent CO2 Laser Power Supply Model RF750 AMP for SL400R System, System Part Number R162-491-01, Model Part Number R161-063-00, Power supply has not been tested and is being Sold As Is, Case has been opened- see photos, Measures approximately 29" x 8" x 5.5" Please contact us if you have any further questions, We charge 8.25% sales tax for all items shipping within Illinois. Including local pickups. Tax exemption is available if we are provided with a valid Illinois resale certificate.
|
|
|
Laser Products Laser with Melles Griot Gas Lasers Power supply
Fully functional laser with high voltage power supply p/n: 05-LPM-340-065 1.70-2.45 kVDC 115-230VAC
|
|
|
Light Age 101 PS 208V 3-Phase Pulsed Alexandrite Laser Power Supply Unit PSU 4U
Search our eBay Store! Light Age 101 PS 208V 3-Phase Pulsed Alexandrite Laser Power Supply Unit PSU 4U SKU: JV-LEV-C-LITEAGE101PS Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Light Age 101 PS 208V 3-Phase Pulsed Alexandrite Laser Power Supply Unit PSU 4U Model: 101 PS We were unable to test this unit Unit comes with its control key Unit is mounted on a 4U Rackmount All of unit's switches. Displays, and ports are intact There are light scratches. Scuff marks, sticker marks, and paintwear on this unit's front panel and housing Unit Dimensions(L" x W" x H" 18 4/5 ... morex 19 x 7 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. DO NOT bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an
|
|
|
MELLES GRIOT HeNe LASER 05-LHR-073-434 2mW+ and 05-LPL-340-045 Power Supply
MELLES GRIOT HeNe LASER 05-LHR-073-434 2mW+ and 05-LPL-340-045 Power Supply in nice working condition. Laser itself is near mint with no scratches or damage of any kind. Power supply shows some slight wear but still present 8/10 condition! Switchable for 115V or 230V operation. Everything works great. This is rated at greater than 2mW! The beam looks nice and bright and collimated. This unit has been stored in a cabinet in a climate controlled laboratory. Thanks for looking!
|
|
|
Melles Griot 633nm HeNe Laser W/ AC power supply with key type power switch
Melles Griot Model# 05-LHP-073-515 633nm HeNe Laser(S/N# 5944ED) with matching 05-LPL-901-050 AC power supply with key type power switch. Laser is nicely mounted on a metal plate by 2 machined supports with rubber feet on the bottom of the metal plate. The power supply is just held on with tape and can be remote about 1.5 feet(approximate cable length) from the laser tube if desired. IEC power cord IS included. Nice experimenter item for lab. School, or shop use. Item is functional; I have no instrumentation to measure its output power. So bid accordingly. The label on the laser tube says Class IIIa(CDRM) CLASS 3B(IEC825-1 1993) 5mW maximum@ 632.8nm. Please note that I am selling this item as USED, STRICTLY AS-IS. I ship within 3 days of receipt of funds. CALIFORNIA residents pay sales tax. Item will ship upon receipt of guaranteed funds. ... morePayPal Will ONLY be accepted from users with a CONFIRMED ADDRESS* AND* the Item MUST ship to that SAME ADDRESS. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14a977292e3-0x107-
|
|
|
Brother Power Supply HL-2240 Laser Printers P/N: MPW3052
This power board has been fully tested and each feature functions as it should. It is in great used condition and has no major physical defects. Specifications, Manufacturer Brothers Model MPW3052 Device Type Power Supply Click on the image below to get zoomed view of the item. Shipping: Domestic: Free Shipping covers all shipments to the lower 48 states. We ship globally using eBay's Global Ship program. Usually. We ship within 24hrs after payment. Items purchased after 12:00pm on Friday, on a holiday, or over the weekend will be shipped next business day. We will only ship to the address on file with eBay/Paypal. Most shipments are sent USPS and include $50.00 shipping insurance. For additional services or insurances, please call immediately after placing the order. Order Cancelation: Upon payment. The sale is considered complete and ... morethe item is scheduled to ship. If you wish to cancel an order, you must do so BEFORE payment is sent. Payment: Please pay within 7 days of purchase date. Otherwise an unpaid item case will be automatically opened. Sales tax is applied to Texas buyers, please contact us prior to payment if you qualify for tax exemption(sales tax paid will not be refunded) Warranty: All sales include a free 30 day warranty! The warranty covers items that are not as described. Items that are incompatible or mistakenly purchased may be returned within the 30 day window. But will incur a restocking fee equal to the cost of shipment incurred on our end. ALL of our items bear our logo"power button" stamp and some also include a warranty sticker; please do not remove either of these QC markings, or the item can not be returned, any warranties will be void. Returns: Returns are accepted within 30 days of purchase date. Please request an RMA via ebay messaging. We must have contact from you via ebay messages prior to the end of the 30 days. Buyer pays return shipping. Returns can be made for exchange or refund if a replacement is not available. We reserve the right to end any listing or auction
|
|
|
Spectra-Physics 2560-56 Laser Power Supply Refurbished
This Spectra-Physics 2560-56 Laser Power Supply is refurbished surplus. Includes Final Inspection and Test Report. The physical condition is good. Part No: 2560-56 Model No: 2560 Made in the USA Condition: Refurbished. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 37"x32"x32" 310 lbs. Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See ... moreDetails Below) Lister 1 RL0 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 7.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and
|
|
|
MELLES GRIOT 532nm 500mw laser with DPSS power supply and controller
Very well kept! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14aa40048c1-0x101-
|
|
|
C113018 Spectra-Physics 7960-L4-VS Diode Pumped Laser Head 7300E-L4 Power Supply
Click to Enlarge) Product ID# C113018 This lot includes a Spectra-Physics 7960-L4-VS Diode Pumped Laser Head. Along with a 7300E-L4 Power Supply, which contains a Spectra-Physics 0129-1462 Module(mfd. 5/96, s/n: 1027K05) and a Robidart& Associates 012-1734 Module, as shown. These items look to be in good cosmetic condition, showing some minor signs of wear. The power supply powers up, as shown in the photos above. However, I'm not sure how to actually make the laser head laze. This is the extent of my testing of these items, and they are being sold as-is. Approximate overall unpacked dimensions: 25"L x 21"W x 10"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the ... moreitem description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 77 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 41 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California and Texas Sales Tax For all
|
|
|
NICE CLEAN VERY LIGHT USE SPECTRA PHYSICS HENE LASER & POWER SUPPLY
CLEAN PULL FULLY TESTED COMBINED SHIPPING ALWAYS AVAILABLE TERMS DO NOT BID IF YOU HAVE ZERO FEEDBACK UNLESS YOU CONTACT US FIRST NO FOREIGN BIDS I will ship to certain countries. BUT ONLY IF YOU ASK FIRST! DO NOT BID UNTIL AFTER I ACKNOWLEDGE YOUR REQUEST! If you have a feedback rating of less than 5 please contact us first. Before you place a bid. If you are a non-US payer you must also contact us first. All items must be paid for within 7 days of the auction ending. If we do not receive payment or have had no communication within those 7 days, we will report you as a non-paying bidder. All shipping cost for items sent USPS will include charges for Delivery Confirmation. Insurance will be optional, but we will not be responsible for lost or damaged items that are not insured. We must do this because of problems we have encountered in the ... morepast with unscrupulous, bidders with 0 or very low feedback ratings. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hughes Laser Power Supply 5020 for HeNe 115V 310mA - Series 5000
Hughes Helium Neon Laser Power Supply Used. Military lab surplus power supply is from the Hughes Series 5000. Model No. 5020. 115V, 50/60 Hz, 310mA. Safety interlock present. Came with a note stating in good condition, but does not have key so we are unable to power it up and test it. Attached power cord. Good used cosmetic condition. Light scuffs and scratches. As shown. No laser, manuals, software, or other accessories. Selling as-is. Shipping Shipping weight is 3 lbs. Ships via your choice parcel select or priority mail. Seller provides delivery confirmation and insurance within the U.S. Sorry. No international sales on this one. Our Sales Policies Money Back. Minus shipping, if not satisfied. International sales are"As-Is. If you have any questions, please email us before purchase. We package carefully and ship quickly. PayPal is ... morethe accepted payment method, expected within 3 days. Terms and conditions of sale: All items are sold as is. With no warranty or guarantee implied or intended by the seller or the auctioneer, other than money back, if applicable. It is recommended the buyer make every effort to confirm item descriptions to their satisfaction before bidding on or purchasing any item. Seller is not responsible for how items are handled, used, or operated upon sale. Once the item is declared sold it becomes the responsibility of the buyer with all liabilities attached thereto.
|
|
 |