In 
 
Order by: 
Available to: 
Price: 
 - 
$
1999.00
Buy It Now
$20.00 Shipping
Condition: New
Location: Los Angeles, United States
NAIZEA 60W Cutter Machine CO2 Laser Engraver 20 × 28 in with Autolift Autofocus. ▶【Auto-Lifting & AUTOFOCUS】:It has both honeycomb and blade engraving ... moreplatforms, so that the machine can better engrave harder and softer objects (the blade platform suits hard objects/ honeycomb platform suits soft objects).
$
529.99
Buy It Now
Free Shipping
Condition: New
Location: Memphis, United States
The desktop laser engraver is known for its accessibility, versatility, and portability. No need to worry! 6-month warranty on all laser tubes and power ... moresupplies 40W. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.
$
409.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 40W K40 CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 8"x12" Workbed (DF0812-40BW). 40W Laser Engraver 50W Laser Engraver ... more55W Laser Engraver 60W Laser Engraver 60W Laser Engraver 70W Laser Engraver.
$
399.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 40W K40 CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 8"x12" Workbed (DF0812-40BW ). The desktop laser engraver is known ... morefor its accessibility, versatility, and portability.
$
2299.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (MF-2028-60E ). Our Mid-Range CO2 Laser Engravers — ... moreknown for efficient engraving speeds and considerable cutting capabilities.
$
1799.99
Buy It Now
Free Shipping
Condition: New
Location: Carlstadt, United States
We garnered over ten years of experience in the laser engraving industry before launching OMTech out of Anaheim, California. Our mission: to make quality ... morelaser machines accessible to all. Laser Power: 50W.
$
252.00
5d 11h 13m 30s
1 bids
Condition: New – Open box
Location: Kingwood, United States
Equipped with an adjusting lift table to accommodate objects of various sizes, simply plug in the USB connector to your computer system and you’re ready ... moreto develop stunning laser engraved/cut materials.
$
1799.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 50W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 12"x20" Workbed (MF-1220-50BW ). Our Mid-Range CO2 Laser Engravers — ... moreknown for efficient engraving speeds and considerable cutting capabilities.
$
1000.00
6d 9h 49m 5s
0 bids
$1950.00 Now
Free Shipping
Condition: Used
Location: Ormond Beach, United States
Has NEW CO2 Laser Tube.
$
2199.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 16"x24" Workbed (MF1624-55 ). Our Mid-Range CO2 Laser Engravers — known ... morefor efficient engraving speeds and considerable cutting capabilities.
$
429.99
Buy It Now
Free Shipping
Condition: New
Location: Carlstadt, United States
OMTech 40W K40 CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 8"x12" Workbed (DP0812-40BGE ). The desktop laser engraver is known ... morefor its accessibility, versatility, and portability.
$
2299.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Bring your ideas to life with OMTech's high-powered laser engravers! When your work is done, just unlock the casters and wheel it anywhere you want for ... moreeasy storage and quick transport. 1 x CO2 Laser Engraver.
$
1999.00
Buy It Now
$60.00 Shipping
Condition: New
Location: Los Angeles, United States
Stock photos are used above. I can/will send additional pictures of the unit installed upon request* If you are in the market for a new laser engraver/cutter. ... moreYou have come to the right auction. I purchased this machine brand new from Legacy Lasers, Dec 2012 for $8,000 and have since put less than 200 hours on the tube. Please take a minute to view their site for all the machine specifications and details that I may not have listed here. Why am I selling so soon after purchase? I currently have 2 lasers setup and running, we are moving out of state and will only be taking one machine with us so.one has to go. Our loss will be your gain on this auction. This machine is in perfect condition and operates flawless as designed. Included in this auction is the Series 800 60w machine with tube installed. 6" exhaust fan, CW5000 Chiller, air assist, bottle rotary attachment, software, two spare focus lens, and 2 brand new 60w spare tubes. If you price the items listed out seperately, you will easily be in the $9,000 plus price range. This machine is currently setup and will be fully demonstrated upon pickup. This auction is"as is" however. Check my feedback and bid with confidence as the machine is as close to brand new as you could possibly get without ordering it from the factory. Local pickup only from Elyria, OH, no shipping offered or implied. Please ask any questions prior to bidding. I am accepting PAYPAL or cash only for this auction. Check my feedback, bid with confidence, and Happy Bidding! Please note that you will need either a pickup truck or full-sized cargo van to pick this unit up. It WILL NOT FIT into a minivan without taking it apart. Engraving/ Cutting Area 35.4 x 23.6" Laser Power 60W Laser Type Co2 Machine Dimensions 53.5 x 39.7 x 40.9" Max Material Height 10.6" by Motorized work table Cutting Depth 3/4" Acrylic Engraving Speed 39"Sec Cutting Speed 23"Sec Resolution(Dpi) Up to 1200 Dpi Position Repeatability.0004" Drive Type Stepper Power Requirement 1
$
1599.00
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
This CO2 laser engraver includes 2 workbeds include the honeycomb platform and blade platform, they are suitable for engraving materials of different ... morehardness, the honeycomb platform suits both hard ans soft material and the blade platform suits hard material.
$
409.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 40W K40 CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 8"x12" Workbed (DF0812-40BW ). The desktop laser engraver is known ... morefor its accessibility, versatility, and portability.
$
2299.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Bring your ideas to life with OMTech's high-powered laser engravers! When your work is done, just unlock the casters and wheel it anywhere you want for ... moreeasy storage and quick transport. 1 x CO2 Laser Engraver.
$
1800.00
2d 6h 11m 29s
0 bids
$130.01 Shipping
Condition: Used
Location: Hubbardston, United States
The Laser tube has only 48 hours of use. It can last for 1000 to 2000 hours depending on the power setting. Introducing the FLUX beamo (30W) Laser Cutter. ... moreIntroducing the world's smallest CO2 laser printer and engraver.
$
275.00
Buy It Now
$14.95 Shipping
Condition: New
Location: Mansfield, United States
A powerful and efficient 2 phase Nema 23 stepper motor is included and prewired with the standard round 4 pin aviation connector found on many makes of ... morethe Chinese laser engravers for a hassle free plug and play experience.
$
3500.00
6d 5h 42m 14s
0 bids
Condition: Used
Location: Plaistow, United States
The laser interface board gets a signal to stop firing prior to the cut finishing.
$
419.99
Buy It Now
Free Shipping
Condition: New
Location: United States
The desktop laser engraver is known for its accessibility, versatility, and portability. No need to worry! 6-month warranty on all laser tubes and power ... moresupplies 40W. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.
$
2899.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 80W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (MF-2028-80E ). Our Mid-Range CO2 Laser Engravers — ... moreknown for efficient engraving speeds and considerable cutting capabilities.
$
2299.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Bring your ideas to life with OMTech's high-powered laser engravers! Rated Laser Power: 60W. When your work is done, just unlock the casters and wheel ... moreit anywhere you want for easy storage and quick transport.
$
2899.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (AF2028-60 ). Our Mid-Range CO2 Laser Engravers — known ... morefor efficient engraving speeds and considerable cutting capabilities.
$
132.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Why Choose VEVOR?. CW-3000 Industrial Water Cooler Chiller. The water cooler chiller features a stable performance with an 9L large-capacity cooling box. ... moreA professional forced air-cooled radiator inside quickly takes away the heat.
$
21000.00
Buy It Now
Condition: Used
Location: Englewood, United States
Trotec Speedy 360 Laser Engraver. Aluminum grid table. Speedy 360 CO2. Lens 2.0, 2.5. 32"x20" cutting/engraving area. CO2: 80 Watt.
$
2699.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (MF2028-60 ). Our Mid-Range CO2 Laser Engravers — known ... morefor efficient engraving speeds and considerable cutting capabilities.
$
4500.00
Buy It Now
Condition: Used
Location: San Antonio, United States
Almost an entire business for sale! Universal Laser Systems Cutter/Engraver VLS 6.60 60 Watt CO2 Laser Options include: 2.0 lens Air Assist w/cone System ... moreSpecs Work Area 32 x 18 in(813 x 457 mm) Maximum Part Size37 x 23 x 9 in(940 x 584 x 229mm) Dimensions44 x 39 x 36 in(1118 x 991 x 914 mm) Motorized Z Axis Lifting Capacity40 lbs(18 kg) Lens+ 2.0 in(51 mm) Laser Platform Interface PanelFive button keypad PC ConnectionUSB 2.0 Optics ProtectionAir Assist Optional Cabinet StyleFloor-Standing Laser 60 Watts Approximate Weight 325 lbs(147 kg) Power Requirements110V/10A One Touch Photo Software Also comes with: Penn State Industries Dust Collector-Blower. Vector Cutting Table, Three(3) Laser Engraveable Flask Sets(Pink, Black, Leather) 12" Table Shear for Metal& Plastic Cutting, Two(2) Commemorative Flag Cases, Various Sheets of engraving stock(Metal& Plastic) Bottle of LaserClean
$
3799.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 80W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (AF2028-80 ). Our Mid-Range CO2 Laser Engravers — known ... morefor efficient engraving speeds and considerable cutting capabilities.
$
343.99
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
◆ Model:K40. Plus, you can watch it all happen through the protective-tinted viewing window. The inclueded exhaust fan makes this laser engraver features ... moreof better ventilation, lower noise, easier operation and better portability.
$
3399.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 80W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (AF2028-80 ). Our Mid-Range CO2 Laser Engravers — known ... morefor efficient engraving speeds and considerable cutting capabilities.
$
1500.00
Buy It Now
Condition: Used
Location: Astoria, United States
Co2 laser engraver cutter Hurricane Lasers Agnes 40 watt works with laser cut software. ATTN Laser has been recently tested (06/19/2021) it produced beam ... moreand engraved on wood (basic water cooling system was connected) laser operated successfully.
$
2399.99
Buy It Now
Free Shipping
Condition: New
Location: United States
OMTech 60W CO2 Laser Engraver Cutter Ruida with 16x24 in. Bed & Rotary Axis C. Our Mid-Range CO2 Laser Engravers — known for efficient engraving speeds ... moreand considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm (.25" to. 35") thick plywood and acrylic.
$
3799.99
Buy It Now
Free Shipping
Condition: New
Location: Memphis, United States
OMTech 100W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (MF-2028-100E ). Our High-Power CO2 Laser Engravers ... more— known for potent laser beams with heavy-duty cutting ability and professional precision.
$
3799.00
Buy It Now
Free Shipping
Condition: New
Location: United States
Reci 100W laser tube. - Working Table: Steel Honeycomb. Does it have Honey comb table?. Does it have Linear guides?. About Laser tube. you can ask a truck ... moreto help you. Does it have red dot position finder?.
$
250.00
21h 56m 40s
0 bids
$325.00 Now
$12.65 Shipping
Condition: New – Open box
Location: North East, United States
Ruida CO2 Laser Controller Board RDC6445S Support Lightburn for CO2 Laser Engrav.
$
8500.00
Buy It Now
Condition: Used
Location: Oak Lawn, United States
Paradigm Medical Equipment Please call us anytime! 423-991-0086 Please call us anytime. 2007 Active FX Lumenis Ultra-Pulse Encore Co2 surgical& cosmetic ... moreLaser DOM/ March 2007 for this available"Active FX" CPG surgical/ cosmetic laser Lumenis ENCORE ULTRA-PIULSE Co2- no deep IR scanner included To confirm. This is not a total FX system to include the Deep IR scanner. Whether or not a set of the optional surgical pins is with this system has yet to be determined. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
$
2299.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Bring your ideas to life with OMTech's high-powered laser engravers! Rated Laser Power: 60W. When your work is done, just unlock the casters and wheel ... moreit anywhere you want for easy storage and quick transport.
$
3800.00
3d 5h 48m 21s
0 bids
Free Shipping
Condition: Used
Location: Houston, United States
It is in excellent condition, and I recently bought a new fiber optic cable for it.
$
12.59
Buy It Now
Free Shipping
Condition: New
Location: Lexington, United States
Simple clamp on system for the the K40 laser to hold a laser cross/dot (not included) and air nozzle in angle adjustable brackets so you can get everything ... morelined up. (not included). This isOur Own Design 3D printed in quality PLA and ready to use.
$
435.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
The included compatible 40w laser tube can work with the K40 laser engraver&cutter perfectly, it will help you complete lots of designs in the future. ... morePlus, you can watch it all happen through the protective-tinted viewing window.
$
159.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 880mm CO2 Laser Tube 50W for Engraving Cutting Machines W/ Water Cooling. Length: 880mm. It is excellent in laser spot mode, has strong laser energy, ... moreand a long service life. Max Power: 50W. 1 × 50W Laser Tube.
$
2349.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Bring your ideas to life with OMTech's high-powered laser engravers! When your work is done, just unlock the casters and wheel it anywhere you want for ... moreeasy storage and quick transport. 1 x CO2 Laser Engraver.
$
219.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Engravings on round objects are always demanding, but this Preenex Rotary Axis has the capabilities to help you get the job done right. 1 x Rotary Axis. ... moreYour kind consideration is highly appreciated.
$
2999.00
Buy It Now
Free Shipping
Condition: New
Location: United States
This machine is suitable to: woodworking, textile cutting, industrial prototyping, industrial. Can not work on. desk sets, scrap booking,photo albums, ... morejewelry, crafts, Italian charms.
$
500.00
Buy It Now
$36.45 Shipping
Condition: New – Open box
Location: Jonesboro, United States
New CO2 Laser Tube W2 90 W Peak Power 101 W Agreement Power 90 W Please refer to RECI Laser website for conditions and working with this model.
$
1799.99
Buy It Now
Free Shipping
Condition: New
Location: Memphis, United States
OMTech 50W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 12"x20" Workbed (MF-1220-50BW ). Our Mid-Range CO2 Laser Engravers — ... moreknown for efficient engraving speeds and considerable cutting capabilities.
$
167.98
4d 22h 33m 49s
0 bids
$156.01 Shipping
Condition: New
Location: Ontario, United States
Replace your old tube with Orion Motor Tech's heavy-duty 80W F4 laser tube. Made of tough borosilicate glass, this durable CO2 laser tube leaves competitors ... morebehind with its 8000-hour service life. (Its beam can function as high as 95W, but at the cost of a shorter expected life.).
$
529.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
The desktop laser engraver is known for its accessibility, versatility, and portability. No need to worry! 6-month warranty on all laser tubes and power ... moresupplies 40W. Not readily compatible with rotary axis devices.
$
3699.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 100W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (MF-2028-100E ). Our High-Power CO2 Laser Engravers ... more— known for potent laser beams with heavy-duty cutting ability and professional precision.
$
399.00
Buy It Now
Free Shipping
Condition: New
Location: Swampscott, United States
40W Water Cool Sealed CO2 Laser Tube for Engraving Engraver Cutting Cutter Machine Description 1) Input voltage: AC 220v+30 or AC 110v+20(to be specified ... morewhen placing order) 2) Maximum output voltage: DC 25DV(40W; 50W) DC28KV(60W) DC35KV(80W) 3) Maximum current: DC20mA(40W;50W) DC23Ma(60W)DC28ma(80W) 4) Isolation withstands voltage: Input-output. Input-enclosure: AC2000V-100Ma-60s; negative pole of output connected to enclosure. 5) Protection: with well-grounded enclosure. Output circuit of power supply can be opened for short time( but arc between positive pole and enclosure should be avoided) 6) Response time(from time of input being available to the output current being up to nominal value) 7) TTL voltage level control: effective voltage level can be high or low through setting 8) Protection switch: for detection of cooling water. To protect laser device; or activate with enclosure is opened. 9) Laser power adjustment: a. by adjusting the output current of power supply through resistor; b. through PWM control(magnitude being TTL voltage level) 10) Environmental requirements: temperature(10~40? Relative humidity laser tube Specifications 40W 50W 60W 80W 100W Wavelength 10600nm 10600nm 10600nm 10600nm 10600nm Beam diameter 1.95 2.2 2.5 3.5 3.8 Power output(W) 40 50 60 80 100 Triggering voltage(KV) 22 22 24 28 35 Operating voltage(KV) 15 16 16 18 20 Operating current(mA) 18 20 22 25 30 Outer diameter(mm) 50 52 55 60 60 Length( mm) 700 1000 1200 1600 1800 Power stability ±5% ±5% ±5% ±5% ±5% We have 40w. 50w, 60w, 80w, 100w, 130w, 150w laser tube, power supply, optics parts. And other components for sale, Please contact us via ebay for. More information. Specification of this 40w Laser Tube. Model CO2-TUBE-40W-700CM Output Power 40W Wavelength 10600nm/10.6um Working Voltage 15KV(Trigging Voltage=22KV) Working Current 18mA Divergence 2.2(beam diameter) Dimensions Length 700mm Package 1pc 40W laser tube If you need the details of the instructions. Please contact us for more. ATTENTION: 1. We
$
2699.99
Buy It Now
Free Shipping
Condition: New
Location: Memphis, United States
OMTech 60W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (MF2028-60 ). Our Mid-Range CO2 Laser Engravers — known ... morefor efficient engraving speeds and considerable cutting capabilities.
$
1567.02
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Telephone Number: US +1(302) 319-2166 UK +44 20 3239 5699 AUSTRALIA +61 7 31888297 Products are 110V in our US warehouse. If you need 220V item. Please ... morecontact us. We will ship 220V item from non-USA warehouse and customer will pay the additional shipping fee for the 220V item. Brand New! Updated New 50W CO2 Laser Engraving Cutting Machine AC110V/220V+USB Interface + Auxiliary Rotary Device Certification(FDA.CE,ISO9001) High Quality 3 Years Warranty This machine is suitable to: woodworking. Textile cutting, industrial prototyping, industrial marking, signmaking, medical part marking, aerospace, architectural modeling, specialty advertising, plastics fabricating, flexo, point of purchase, rubber stamps, picture framing, gift manufacturing, bar coding, engraving, gasket cutting, puzzles, cabinetry, awards& recognition, personalized pens, door pulls, cut scroll patterns, games& toys, finger joints, inlays& overlays, fraternity paddles, music boxes, light switch plates, jewelry boxes, parts marking, router templates, desk sets, scrap booking, photo albums, jewelry, crafts, Italian charms. Feature: FDA Compliant. CE Certification, ISO9001 Quality Certification. USB Interface, U-Flash Disk Supported. Machine will read files from memory stick.You can work even without a PC. Smooth and Precise Engraving and Cutting. Manual up/down table. Red Dot Pointer. Provides a visible means of determing engraving location. Raster/Vector Color Mapping. Change your engraving speeds and power by using color settings. Air Assist. Remove heat and combustible gases from the cutting surface and make the engraving and cutting projects a breeze. Adjustable Speed and Power. Intuitive Control Panel. Set Speed, power and more controls directly from the laser. Exhaust Fan system included. Reinforced and thickened machine body make transportation absolutely to be safer and longer life time. Cylinder Rotary Attachment. Engrave any cylindrical object.Process the cylinder object such as cup. Brush pot, musical instrument and so on. Separ
$
3599.00
Buy It Now
Free Shipping
Condition: New
Location: United States
CO2 laser engraving machine. 100W Rici W2 Tube. Widely used: Can be used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber,marble, glass, ... moreand etc. 5200W chiller 1. the chiller is CW-5000 now.
$
240.00
Buy It Now
Free Shipping
Condition: Used
Location: Ridgeville, United States
$
1799.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
OMTech 50W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 12"x20" Workbed (MF1220-50 ). Our Mid-Range CO2 Laser Engravers — known ... morefor efficient engraving speeds and considerable cutting capabilities.
$
1999.00
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
It has both honeycomb and blade engraving platforms, so that the machine can better engrave harder and softer objects (the blade platform suits hard objects/ ... morehoneycomb platform suits soft objects). The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height.
$
159.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Radiate the heat away from your laser tube and cool down your machine with ease and reliability! Our industrial cooling systems are known for their consistency, ... moredurability, and compatibility with 40W CO2 Laser Engraver machines.
$
429.99
Buy It Now
Free Shipping
Condition: New
Location: Memphis, United States
OMTech 40W K40 CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 8"x12" Workbed (DP0812-40BGE ). The desktop laser engraver is known ... morefor its accessibility, versatility, and portability.
$
1799.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
4-Pin Port connection for rotary axis devices. CO2 Laser Lens Spec. CO2 Laser Tube Spec. AIR ASSIST: A pre-installed air compressor guides a pressurized ... moreair stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
$
4500.00
Buy It Now
Condition: Used
Location: Bowling Green, United States
Worktable: Honeycomb. Used RX-1911 40W laser (Aeon MIRA 5). Manufacturer: Falcon Laser (AEON Laser). Laser Power: 40W. Aiming Laser: Included. Misc: 11-3/4" ... moretube extension for laser tube upgrade. Cut Speed: up-to 680mm/Second (material dependent).
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Universal Laser - 50 Watt CO2 Laser and Power Supply
Universal Laser UL-50-OEM 50 Watt CO2 Laser& Power Supply 50 Watt Carbon Dioxide Laser and matching DC power supply. Used in an in-house demo system. About 10 years old. But hours are very low. Warranted to be functional, and produce at least 40 Watts. Sales tax will be added to invoice for shipments for California and Washington. Unless resale certificate provided.
25 watt Co2 Laser Synrad model H48-2-28SW with Power One Supply
25 watt Co2 Laser Synrad model H48-2-28SW-4664 Comes With 1. 1. Power One supply with ac power and dc power cable with connectors. 2. 2. Key for laser supplied. 3. 3. Guarantied working. The picture of unit burning wood is actual laser listed in this auction. Wood. Controller and control cables NOT supplied please check my other auctions for these items. Total Weight of 28 lbs. Note: This is not a toy and should be treated with respect. DO NOT attempt to. Power up this laser without a proper controller or you could damage the. Internal drive electronics. All the information needed for safe operation can be had from Synrad's web site. If bidding on this auction you should have the knowledge to safely operate and use high powered lasers. Thank you for looking. Jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e03018d23-0xfa-
can demo! YEAR 2010 CO2 SYNRAD 100 WATT LASER MARKER - COMPLETE MARKING SYSTEM
These items will ship via Insured FedEx Gound in foam padded plywood box packaging* COMPLETE Synrad 100 Watt Laser Marking System Year 2010 ~ Very Low Use Operates 100% ~ Absolute Perfect System both Functionally& Cosmetically INCLUDES: ~ Synrad T-100 Firestar Laser(Air-cooled) ~ Synrad FH Flyer Marking Head(Synrad's latest model) ~ PC with Software- Latest version WinMark Pro 6.3(this has rotary marking support) ~ USB Licensing Hardlock(dongle) ~ RF Supply with RF Cable ~ DC Power Supply(Purchaser has choice of single phase or 3 ph) ~ Hardware& Software Manuals ~ All Cables*The T-100 is Synrad's Best& By Far Most Expensive 100 Watt Laser* This Entire System is Priced Less Than Just the Cost of the Laser New! Pricing is Basically A 50% Off Sale As Compared To New Cost! This Complete& Totally Functional System is Absolutely ... morePerfect! We Can Demo Customer Is Welcome To Bring Their Materials for Testing and Try It Out E-mail If You Have Questions IN PURCHASING THIS ITEM BUYER IS ACKNOWLEDGING he/ she has full understanding and experience to work with this equipment in a safe manner! Buyer assumes all responsibility related to this equipment. This is NOT a toy! Buyer is responsible in every way for the safe operation of this equipment. Payment and Shipping Terms: Buyer must make contact within 24 hours of auction end to arrange payment and shipping. Payment must be received within 4 days of auction closing. Buyer pays ACTUAL shipping ~ items will be shipped FedEx ground in foam padded plywood box packaging ~ OR buyer may arrange pick up/ shipping. Accepted Forms of Payment Within the 50 US States: CASHIER'S CHECK. COMPANY CHECK, BANK WIRE TRANSFER ~ Checks must be sent via UPS or FedEx express to ensure timely arrival and have the ability to track. Checks must clear through bank prior to shipping. Accepted Forms of International Payment(Anywhere Outside the 50 US States) BANK TO BANK WIRE TRANSFER*Items Subject To Walk In Sale*
TESTED - COMPLETE SYNRAD FENIX CO2 LASER MARKING SYSTEM ~ WILL MARK STAINLESS
TESTED ~ FULLY FUNCTIONAL Synrad Fenix Marking System Includes PC With WinMark Pro Software& Licensing Dongle- Version 4 This One Will Mark Stainless We Have Other Field Sizes Available for Other Marking Applications if Preferred E-mail if you have questions IN PURCHASING THIS ITEM BUYER IS ACKNOWLEDGING he/ she has full understanding and experience to work with this equipment in a safe manner! Buyer assumes all responsibility related to this equipment. This is not a toy! Buyer is responsible in everyway for the safe operation of this equipment. Payment and Shipping Terms: Buyer must make contact within 24 hours of auction closing to arrange payment and shipping. Payment must be received within 5 days of auction closing. Buyer pays ACTUAL shipping or buyer may arrange pick up/ shipping. Accepted Forms of Payment Within the 50 US States: ... moreCASHIER'S CHECK. COMPANY CHECK, BANK TO BANK WIRE TRANSFER ~ 10 business days for check to clear through bank prior to shipping ~ Checks must be sent via FedEx/ UPS Express to ensure timely arrival and ability to track. Accepted Forms of Payment Outside the 50 US States(International) BANK TO BANK WIRE TRANSFER*Items Subject To Walk In Sale*
Coherent General Everlase Arrow 1200W Co2 Laser MOTIVATED SELLER
1992 Coherent General Ever Lase 1200W co2 Laser. Clean unit. Will cut 3/8 steel at 30 inches/minute call 508-272-7901 with any questions Serial#250491 Manufacture Date-12/1991 Model Number-Everlase Arrow Hours- 6364. Rev 1 power supply Early Version Electronics Lasercut System Serial Number- hp126 Manufacture Date 1/92 Model Number- hp 50100 Table Travel Size in the X axis 100" Table Travel Size In the Y axis 50" Table Size 51"x102" CNC Controller Model Number Fanuc 0M Serial Number-N3158 1191 10
Photon Sources Model 303 CO2 Laser 475W 10600 nM
Quality Used Packaging and Processing Equipment for the Food. Chemical, and Pharmaceutical Industries. Photon Sources CO₂ Laser Model 303. This listing is for a used Photon Sources Model 303 carbon dioxide laser. Serial#4399. 475 watt, 10,600 nM beam for cutting, heat treating, etc. Manufacture date March, 1981. Control pedestal is included; wires have been cut between pedestal and laser. Requires 230 VAC 3 phase power. This item has not been tested and is sold"Used-As-Is. There is a crack in the glass towards the end of the laser. And it appears there is a switch missing from the control panel; other than that this item appears to be complete. Please feel free to ask any questions about this item. Click the thumbnails to load a larger version below. Bidding Information. Terms of Sale: All items are offered as"Used-As-Is" This ... moredoes not mean that the item does not work. It just means that we have not run this item in production ourselves and we don't have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can't come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. Further Terms and Conditions of Sale can be viewed below. Shipping: Skidding and Crating: If the item that you are bidding on requires skidding or crating. Then we do this at cost. Contact us for more info. Shipment: We ship items as soon after your payment clears at our bank as is possible. If your item requires special skidding or crating then it may take a few days to prepare. Contact Us: Phone: Call 502-778-3883 during regular business hours to contact Michael Rougeux or Chris Miller for answers to your questions. Fax: 502-778-3787. Hours: 8:00 am to 5:00 pm Monday thru Friday except holidays. Although we do our best to respond quickly. Email and calls made outside those hours will most
SYNRAD FIRESTAR V-20 CO2 LASER TUBE & POWER SUPPLY
2004 SYNRAD CO-2 FIRESTAR V-20 LASER TUBE WITH POWER SUPPLY 2004 SYNRAD-POWER ONE POWER SUPPLY INCLUDED BOTH COMPONENTS WERE PULLED FROM A LAB SETUP& WERE BARELY USED AS YOU CAN SEE IN THE PICS. BOTH COMPONENTS ARE IN LIKE NEW CONDITION SHIPPING TO THE 48 STATES ONLY BECAUSE THIS IS AN ELECTRONIC DEVICE. NO WARRANTY OR GUARANTEE IS EXPRESSED OR IMPLIED
Everlase Coherent S51 Industrial 1500 Watt CO2 Laser
Click to verify PesaMember Click to verifyify Buy& Sell with confidence from Consider It Sold. Inc- Colorado's largest online eBay Consignment seller. We can help you sell your items on eBay! Just give us a call at TOLL FREE at(877)264-3233 for more information! Everlase Coherent S51 Industrial 1500 Watt CO2 Laser Up for your consideration is Coherent General Everlase S51 Industrial CO2 Laser. This item is currently in storage near Denver Colorado and was pulled from the assembly line in excellent working condition to make room for another project. The Everlase S51 CO2 laser consists of three interconnected units: the laser head. The power supply, and the control panel. These three units form the laser. The specifications are as follows: Rated Power.1500 Watts Power Stability.+/ 2percent long term Maximum Adjustable Power.200 to 1500 ... moreWatts. CW Wavelength. 10600nm(10.6um) continuous wave laser Mode.TEM 00 at 3 Meters Beam Diameter a 1/e2 pts.16mm measured at output Operating Requirements: 380-480 VAC 50/60 Hz 3-phase wye connected 60 amp service consumption is 30 amps at 480 volts Gas proportions CO2.1.2% N2.14.8% He.84% Size and Weight Laser Head L=2.5m W=0.52m H=0.55m Weight =360 lbs Power Supply L=2.3m W=0.91m H=1.31m Weight =3500 lbs This item can be freight shipped anywhere in the world and cost will depend on location and services available at your location. This unit exceeds limitations by FEDEX and UPS and must be palletized for freight shipment. If you do not intend to pick the item up locally. Then it will require freight shipping. The freight shipping cost for this item will vary depending on your zip code. We have included sample rate quotes to various cities above and the sample quotes do include a $50 charge to cover th
Universal M-360 Co2 Laser Cutter Engraver 30 Watt UL-30 working video Auto-Focus
Universal Laser Systems. Inc. C02 laser engraver/cutter/ Model M-360/ Manufactured June 2007/ Rated 30 watts/ Air-cooled/ 12" X 24" work area/ Unit is being sold in as-is, where-is, tested operational, as described above condition with no returns/ Buyer is responsible for all shipping and insurance charges. Please feel free to contact us with any further questions/ Feel free to contact us for a video clip of laser in operation Please Note: We do not accept Credit Cards. We do not accept PayPal on items over $1000.00. Please contact us for payment options. Manufacturer's Specifications are available on their web site. 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13e2f9f697f-0xfd-
RF 050, Rofin Sinar Co2 laser 5000 W + KOOLANT KOOLERS CHILLER + LASER MECH ARM
RF 050 Rofin Sinar Co2 laser 5000 W + Chiller + Arm Used ROFIN RF 050 5000 Watts Co2 L aser. C hiller and B eam Delivery System(ARM) Note: Two complete systems are available as well as one set of calibration equipment and many spare and consumable parts. Units were in good working condition at the time of removal as stated by the laser operator. Units have been professionally packaged. Laser operator would be available for consultation for a TBD fee. Included in this auction are the following matched for RF 050: Rofin Sinar: One RF 050 Koolant Kooler: One chiller Model HCV2.0000PR-NF-FILT-H a 20 ton capacity matched for RF 050. Laser Mech: One laser beam delivery component and articulated arm system. Head. Etc. Total package price $149.000 USD. Sold F.O.B. Ann Arbor. Michigan. Will assist with loading. Spare and consumable Laser Mech and ... moreRofin equipment is available for an additional $24.000 if one complete system is purchased or $14.000 with purchase of both systems. Many preventative maintenance spare and consumable parts. 1 Complete Arm, Arm mounting columns, Laser platform(steel stand) Cabling, Control interface, Air regulator, turbine oil, Beam benders, light bulbs, 1 Calibration equipment. Bearings, manuals… Technical data: ROFIN RF 050 Excitation RF Output power 5000 W Power range 500- 5000 W Beam quality factor K 0.4 Pulse frequency 0-10 kHz; cw RF-series principle: ROFIN RF is the first high-powered CO 2 laser with a wear-free outcoupling window made of synthetic diamond. This makes it possible to keep beam parameters constant across the entire control range. And increases up-time. Its excellent beam quality of M² 01* makes the ROFIN RF laser suitable for cutting thick sheet metal. As well as thin sheet metal and for welding with minimal heat affected zones. The laser is a compact unit with all supply and control systems integrated in it. Which minimizes the footprint, and means extremely short startup times. The maintenance-free. Free-running, high-power RF generator is coupled directly to
Coherent Model 44 Gas Dynamically Fed CO2 Laser with Power Supply and Gas Contro
Used Coherent Model 44 Dynamically Gas Fed CO2 Laser. 80 watt output at infrared 10.6 microns, S/N: 44-524, with Power Supply and Gas Control Unit. It requires N2, CO2 and He gases, as well as water coolant and 220V 25A power supply. The laser is fully operational to be used by a laser trained professional. Due to the fact that we have not recently tested and calibrated the laser, it is sold as is. L482) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for ... moredifferent research and development projects. And are now sold due to the termination of these projects. At this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these cr
60mm Cu Total Reflector / mirror for Laser CO2 cutting machine
60mm Cu Total Reflector for La ser CO2 cutting machine T HE ITEM IS USED BUT IT IS IN GOOD WORKING CONDITION. Cu Total Reflector 60mm dia. x 10mm thick side 1: PO/TRZ side 2: SPT/UC Coated@ 10.6um Manufacturer: II-VI INFRARED- made in Singapore Suitable for Mazak: STX44/ SGU44 1.5kw T-8 STXMKII/ SGMKII 1.5kw MAZAK Part Number: Z50MB000060
CO2 Laser Lens - ZnSe - 0.600" Diameter - 4" FL
Found while cleaning out an old office. Laser Research Optics CO2 laser lens. 4" focal length, 6" diameter. I assume this to be the lens described on the label- as it was found inside the container. I have no way of knowing for sure.
VERY NICE PANASONIC 1000 WATT CO2 LASER MODEL YB-1006LB3M2 35 LITERS PER MINUTE
VERY NICE PANASONIC 1000 WATT CO2 LASER MODEL YB-1006LB3M2 35 LITERS PER MINUTE Prev Stop Play Next You are bidding on a Panasonic CO2 Industrial Laser. Model: YB-1006LB3M2. This is a very nice laser in good condition and it is fully guaranteed. 1000 Watts Flow Rate: 35 Liters per Minute We would be happy to load on your truck at no charge or assist in planning the most economical delivery. Any questions? Email us NO RESERVE Please click here to see my other auctions.
CO2 Coherent Laser 70w
4 KEMPCO POWER SUPPLIES 4 COHERENT CO2 70W LASERS 1 SIEMENS RACK P.C. CONTROL 4 SCANLAB GALVO'S WITH MIRRORS THIS WAS ALL WORKING WHEN REMOVED FROM THE BUILDING. PLEASE EMAIL ME WITH ANY QUESTIONS. BUYER PAYS ALL SHIPPING FEE'S
50 Watt CO2 Laser Engraving System- Universal Epilog Coherent Synrad Marking
Focused Light Engraving 853 Waterway Place* Unit#109* Longwood* FL* 32750 Voice: 407) 830-8885* e-mail: sales@focusedlightengraving.com C50W- Refurbished 50 Watt CO2 Laser Engraving System System Specification& Quotation Laser Marking System Price Laser: $14.950 50 Watt CO2 laser. Air Cooled. 120 Volt AC. Single Phase, 15 Amp, Class IV: No Dust Enclosure. Requires Interlocked Room. Remote Power Control Computer Interface. Software controlled Red Spot Pointer Laser for Aiming, Scan Head: High Speed XY Digital Interface Scan Head. Choice of focusing lens. 100. 150, 200, 300, 360 mm Focal Length. Digital Interface Card to control Scan Head& Laser Power, Shielded Cables, Computer& Software: Minimum Pentium IV Class. Required but not included. a. Color Monitor, b. Mouse& Keyboard, c. CD Drive, Windows 7 or WinXP Operating System, ... moreFLE Laser Mark laser engraver software. Accessories. Optional@ Additional Cost Aluminum Extrusion Base& Legs. Specify Leg Height. $799, Safety Enclosure. $4.999, Z-Axis Work Table. Class 4 design. Welded steel and tooling plate fabrication. $4999 Approximately 30” wide x 60” long x 32” tall. Spare Parts Kit. $150, Laser Safe Glasses or Goggles. $155, Patented FOC-ALIGNTM focus finder and beam positioning device. Eliminates costly laser positioning devices. Increases productivity and versatility of the system. Sold exclusively with Focused Light Engraving Systems $1450 Rotary positioning system. See attached specification sheet. $3.495, Programmable X-Y Positioning System. 14” x 14” Travel. See attached $3.950, Auto Focus. $3.950, Installation and training; 2) Days. $2.500*
Synrad C48-2 Liquid Cooled Co2 Industrial Laser
Laser was test fired successfully. But we have no way to test the power output. Burned a quarter inch hole in wood in 1 second. No warranties expressed or implied and may require refurbishment by Synrad, Inc. to operate according to original specifications. DO NOT USE SHIPPING CALCULATOR. CONTACT US FOR A SHIPPING QUOTE PRIOR TO BIDDING. BUYER PAYS ACTUAL SHIPPING COSTS.
LUMONICS LASEMARK 930 HER 8 JOULE CO2 LASER SYSTEM 10.6 um
J&J INDUSTRIAL SERVICES INC. PHONE# 864-474-9207 EMAIL: JJINDUSTRIALSERVICES1064@GMAIL.COM YOU ARE BIDDING ON: A LUMONICS 930 HER 8 JOULE CO2 LASER SYSTEM. IT COMES WITH WHAT IS SEEN IN PICTURES BELOW. THESE PICTURES ARE OF THE UNIT YOU ARE BIDDING ON, ONLY COMES WITH WHAT IS SEEN IN PICTURES. THIS WAS A WORKING UNIT WHEN IT WAS REMOVED FROM SERVICE. IF YOU HAVE ANY QUESTIONS FEEL FREE TO EMAIL J&J INDUSTRIAL SERVICES INC AT THE EMAIL LISTED ABOVE. All products sold by J&J Industrial will have a security sticker. To prevent exchange of an item that is broken for our item. Each sticker is serialized for tracking purposes. Thank-you for taking the time to view this listing if you have any questions or concerns feel free to send us an email before you bid. As soon as we receive payment we will handle and ship your package we strive ... moreto ship same business day as payment received if possible. For an extra fee we can arrange expedited shipping if you need something sooner then the calculated time. PLEASE DO NOT LEAVE NEGATIVE FEEDBACK BEFORE YOU CONTACT US SO WE CAN RESOLVE ANY PROBLEMS. If you have a problem please call us at the office so we can take care of any problems you may have. We work to provide the best customer service possible to all. We will be more then happy to answer any questions about this or any other product J&J is selling. We will do our best to return any inquiries in a timely manner.
ARGES CO2 Laser Scan Head for repair parts
reomved from working equipment,but the glass of the glave scanner missing 14 days money back.
SYNRAD CO2 LASER MODEL J48-1S-7262
The laser tube is a rigid box structure design that provides an ultra-stable platform for the laser resonator. Synrad’s 48-series tubes are mounted into an H-shaped heat sink extrusion that also serves as the chassis for the drive electronics. This guarantees that the laser will withstand the harsh requirements of modern industrial environments. The all-metal sealed tube design and proprietary manufacturing process ensure high gas purity. Essential for long operating lifetimes. With 100,000 Synrad lasers operating worldwide, Synrad is the only CO 2 laser manufacturer that can boast of proven operating lifetimes in excess of 45.000 hours(at which time, a simple and inexpensive gas refill returns the laser to full operation) Synrad lasers can be operated from 0-100% duty cycle. With laser power adjusted using a pulse width modulation(PWM) control. ... moreThe laser is controlled directly with a TTL signal(rear-mounted BNC connector) Alternatively, a DB-9 connector provides remote access to all laser functions, including laser control, fault conditions monitoring, remote interlock, and failure shutdown options. All 48-series lasers operate from standard 30VDC power supplies. And can be either fan-cooled( and models) Or water cooled. Synrad’s 48-series lasers are ideal for incorporation into marking. Engraving, and small cutting systems, where performance, low price and high reliability are essential. ON SYNRAD'S WEBSITE. THEY LIST THE J48-1 SERIES LASER AS 10 WATTS. THERE IS A STICKER ON THE LASER THAT SAYS 30w(THE 7th PHOTO) NOT SURE WHICH ONE IS CORRECT.
LASER BEAM SWITCH SPLITTER SWITCHER CO2 OPTICS WATER COOLED style #2
LASER BEAM SWITCH OPTICS ARE FOR A CO2 LASER BEAM ONE LASER INPUT CAN BE SWITCHED TO EITHER OF TWO OUTPUTS WATER COOLED AIR OPERATED REMOVED WORKING FROM LASER WELDING CELL SEE PICTURES THANKS FOR LOOKING
Cobalt 350 CO2 Laser Engraver
Designed with the operator in mind and carrying various innovative features. Reliable mechanics, and excellent output quality. It's the missing piece in your operations puzzle, putting you on track for continued growth in your engraving and cutting business! Extendable to 29" x 18" 740 mm x 460 mm) work area Patented SmartACT TM innovation to reduce ramping and increase productivity Plug-and-play standard USB port for rapid data transmission, Closed-loop DC servo motor for precise movement of laser carriage, SmartLIGHT light module to illuminate the workspace, SmartLid top lid device for easier access from both ends, SmartBOX cutting accessory for flexible cutting jobs, LaserPro DirectPrint MAC AI Plug-In available for use with MAC OS TrueImage(patent pending) features to assure homogeneous engraving output,
PSI Pulse LP-140 3-Joule Pulsed CO2 Carbon Dioxide Low Pressure Laser+Amplifier
Search our eBay Store! PSI Pulse LP-140 3-Joule Pulsed CO2 Carbon Dioxide Low Pressure Laser+Amplifier SKU: JV-RYA-C-SYSLP140 Condition: For parts or not working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge PSI Pulse Systems Inc. LP-140 Three-Joule Pulsed CO2 Low Pressure Laser w/Amplifier*FOR PARTS OR REPAIR* Laser Label Product: Low Pressure Laser Model: LP-140 Amplifier Label Product: Amplifier Model: LP-140 Physical Condition: The laser and amplifier have scuffs. Scratches and nicks throughout the housings. The seal to the top cover of the amplifier is missing. The label on the laser is damaged. ... moreThe internal components of both laser and amplifier appear to be undamaged. We do not have the necessary resources in our facility to test this system. LP-140 Laser Dimensions: L" W" H" 48* 15* 15 LP-140 Amplifier Dimensions: L" W" H"48* 15* 15 Please visit the following link for more information(for informational purposes only) BEING SOLD AS-IS FOR PARTS OR REPAIR. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and
Cutting Edge 30 watt CO2 Veterinary Surgical Laser. Just fully refurbished.
Cutting Edge Veterinary Surgical CO2 30 watt Laser Save lots of money on a quality pre-owned system. Includes: Cutting Edge 30w CO2 laser: Just had Tube fully regassed and refurbished. Full Power Handpiece Set Foot Pedal. Key. Manual 3 Pair Laser Eyewear Includes FREE Smoke Evacuator with filter and tubing! $2.000 value) Professional Crating and will ship worldwide Sometime easier to get specifics on laser by speaking directly to our sales team. Call directly at 317-570-0448 If interested. Please contact us. We are always happy to do a Live Skype Videocall Demonstration or to videotape the system in operation and upload to YouTube for your viewing. We sell only from inventory we have in stock and has been fully inspected and prepared for sale. Unit is in stock and ready to be packed and shipped. Will ship worldwide. Interested parties are ... moreinvited and encouraged to contact us with any questions or offers. We reserve the right to cancel the auction early as this unit has been listed locally and through other venues. Payment and Shipping: We will ship and deliver your system as soon as funds have been received and verified. If paying by check. Will hold until check clears completely. Accepted Forms of Payment: Cashier's Check or Bank-to-Bank Electronic Funds Transfer(No PayPal) We will crate and ship internationally. Buyer responsible for all shipping, duties and taxes. Please call with any questions to 317-570-0448 Pictures shown are the actual unit! Please contact me directly to arrange payment and delivery. Taxes: 7% Indiana Sales Tax will be added only on sales to Indiana buyers. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e94e193d8-0xfe-
RF 050 Rofin Sinar Co2 laser 5000 W ( RF050 ) 5000W
RF 050 Rofin Sinar Co2 laser 5000 W( RF050) 5000W Auction is for one: ROFIN RF 050. 5000 Watts Co2 L aser Laser is in excellent working condition. We will provide the laser manufactuire's certification of"excellent working condition" with purchase agreement. Many spare and consumable Laser Mech and Rofin RF 050 equipment is available for additional cost. Technical data: ROFIN RF 050 Excitation RF Output power 5000 W Power range 500- 5000 W Beam quality factor K 0.4 Pulse frequency 0-10 kHz; cw RF-series principle: ROFIN RF is the first high-powered CO 2 laser with a wear-free outcoupling window made of synthetic diamond. This makes it possible to keep beam parameters constant across the entire control range. And increases up-time. It's excellent beam quality of M² 01* makes the ROFIN RF laser suitable for cutting thick ... moresheet metal. As well as thin sheet metal and for welding with minimal heat affected zones. The laser is a compact unit with all supply and control systems integrated in it. Which minimizes the footprint, and means extremely short startup times. The maintenance-free. Free-running, high-power RF generator is coupled directly to the resonator without cables. The use of only one RF transmission tube gives the laser a long lifetime. Operation with premix gas. As opposed to separate gases, means that an internal gas mixer can be dispensed with. This reduces the external laser gas installations to one third. International buyers are welcome. Pending import/export regulations and restrictions. For additional information. Pictures or shipping information please call: 510-681-7015- The items below are matched with laser RF 050 and could be included in this package for additional cost. Koolant Kooler: One chiller Model HCV2.0000PR-NF-FILT-H a 20 ton capacity matched for RF 050. Laser Mech: One laser beam delivery component and articulated arm system. Head. Etc. Many laser and accesseries Note: Two Complete systems are available. Sold F.O.B. Ann
MPB CO2 Laser System GN-302-MES, Newport, New Focus, Melles-Griot, ULO Optics
MPB CO2 Laser System MPB CO2 laser mounted on a 36" x 36" x 2" TMC optical table with several optical components. This is for the laser and instruments only. There is no controller(what you see in the pictures is what is included) This system was used in a laboratory environment. There is one lens missing. I tried to get a good picture of it, but you should be able to see where it was in the pictures. Below is a list of what is included with this system. This list is not all inclusive. But contains what we found- there is more to this system than what is listed. MPB CO2 Laser- model GN-302-MES. Serial CO2-0146-299, November 16, 2001 Includes: New Focus: 8081 8401 Newport: MRL-3 VPH-3 U100-A U200-A(quantity 5) U300-A(quantity 4) 423 Series Stage GM-1R PO80BL 850G Actuator 460A X/Y/Z Stage 600A-2R ID-1.0 ULO Optics SZL25 50-150 ... moremm Zoom Lens. Controlled by KR motor Several Melles-Griot items Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves($100 packaging fee added to total) or we can provide a competitive quote to the buyer. Shipping weight 550 lbs. fully crated International Buyers– Please Note: International packaging of these items will be $200 for crating Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. PLEASE NOTE: Due to the way freightquote.com words their Bills of Lading. We will no longer be allowing any shipments made through them. You can contact us for more details,
HIGH POWER CO2 LASER OPTICS AND MOUNTS ,5000 WATT WATER COOLED COMPLETE SET
High power CO2 laser mirrors and optics mounts. THIS SALE IS FOR TWO MOUNTS. ONE SET! Two folding mirrors 4 inch and two smaller mirrors, one out put and one high ref. for CO2 gold coated.
ROFIN LASER SCX30 300+ WATT Co2 LASER
THIS IS A ROFIN MODEL SCX30 LASER IN EXCELLENT WORKING CONDITION HOWEVER IT HAS BEEN SITTING FOR THE LAST TWO YEARS BECAUSE I DO NOT HAVE THE POWER SUPPLY AND LIKEWISE CANNOT TURN IT ON. THE FOLLOWING IS THE REST OF THE INFORMATION THAT I HAVE AVAILABLE(FROM THE TAG) MFG. 2003. S/N X30/1080-1 WAVELENGTH 9.3. 11.5. AVG. MAX POWER 500W. PEAK PULSE 1500 W. PULSE DURATION 5 M S. IF YOU HAVE THE REMAINDER OF THIS SYSTEM OR A FULL SYSTEM WITH A DEAD HEAD AND WOULD BE INTERESTED IN SELLING IT PLEASE CONTACT ME AT DIODIUM1@YAHOO.COM. PAYMENT AND SHIPPING TERMS: BUYER MUST RESPOND WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECIEVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS ITEM WILL BE PACKAGED IN A(QUALITY) PADDED PLYWOOD CRATE AND SHIPPED AS FREIGHT(BUYER PAYS SHIPPING) OTHERWISE, ON SITE BUYER PICKUP CAN BE ... moreARRANGED. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL, BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER. THIS ITEM SUBJECT TO WALK IN SALE*
PFEIFER sky laser 8050N CO2 laser ignition with leather cutting table RM LC-1800
PFEIFER skylaser 8050N + ignition leather cutting table RM LC-1800 CO2 Laser Cutting Machine Manufactured in 2008. CO2 laser skylaser 8050N Laser cutting& engraving laser: 1 aluminum honeycomb lattice. 5 mm grid Equipped with passive water cooling system. Air compressor. Ventilator: Jiuya Sirocco Fan Focusing lens 45 mm for laser engraving and cutting Applications: organic materials. Glass, porcelain, textiles, leather, paper, cardboard, wood, felt, rubber, foam materials, granite, films, sheets& molded parts, coated and anodized metals. Working area: 850 × 500 mm Range: x. Y, 750 × 480 mm Laser power 60 W Laser method CO2 laser Engraving max. 1200 mm/ s 72 m/ min Cutting speed max. 300 mm/ s 18 m/ min Located in UK. Will ship insured upon request. Please ask any questions you might have, or if you need more information ... moreabout the unit, prior to bidding. Thank you and good luck!
TEA CO2 Gas laser
This is a multi-gas TEA Laser core that operates at ~20KVDC and is used to test various gas mixtures ranging from N2. Neon, CO2, Argon, Xenon for spectral and related experiments and general product coding. When used with CO2 mixture. Unit produces ~.5 Joule/ pulse with FWHM of The laser is easily incorporated into HVDC circuit/ capacitor load and trigger using off-the-shelf parts. The Laser is supplied with full documentation& schematics and all support accessories are available thru Andromeda Laser LLC for a nominal fee. We used this core and others like it to prove out mix/ load for various projects. The unit is extremely damage resistant. You would have to run it past failure mode for K's of shots before any damage occurs and repair is easily within the average experimenter ability. Power requirements(TEA CO2) 20 KVDC/ approx.16NF ... morecapacitor load/ Plasma- beam size.625"H) x.625"W) x 10"L) Aluminum alloy electrodes in hermetically sealed.25" G-10 epoxy shell. Internal fast corona-glow G-10 pre-ionizers. If you are into high power gas lasers then you know what this system is. Serious inquiries' will be answered. We are not here to educate.
Wolf 8914.401M Offset Operative Laparoscope w/ CO2 Laser & Stopcock 0* 10mm
Wolf 8914.401M Offset Operating Laparoscope. 0 degree. 10mm. with CO2 Laser Channel and Stopcock Assembly. Autoclavable. Use with Wolf Coupler. 26.7cm Working Length. Excellent condition. 60 day warranty. Payment is due immediately upon purchase or contact me with arrangements. If you don't receive"5 Star Service" please let me know what I can do to improve your experience. Kim Hensley. Didage Sales Co, 907 S 325 E, Warsaw, IN 46582, 574-268-9098"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Coherent Model 44 CO2 laser and Remcor CH2002-A Chiller
Coherent model M44 CO2 industrial laser. Laser is rated at 80 watts and utilizes 220 volt 25 amp service. Laser was used with an engraving system and comes with a Remcor Products Model CH2002-A air cooled chiller. Both machines were in good working condition when removed from service. Item is available for local pickup only. Items are located in Springfield. MA. I also have some spare parts for laser as well as a gas regulator.
KEYENCE CO2 LASER MARKER ML-G9300F CONTROLLER ML-G9310F LASER HEAD 30 W LASER
YOU ARE BUYING ONE KEYENCE CO2 LASER MARKER ML-G9300F CO2 LASER MARKER CONTROLLER WITH ML-G9310F LASER HEAD 30 WATT LASER ML-G9300F CO2 LASER MARKER CONTROLLER AND ML-G9310F LASER HEAD. THIS IS USED SURPLUS REMOVED FROM A SHUTDOWN ABOUND SOLAR FACILITY AND IS GUARANTEED WORKING. THIS IS FOR THE LASER HEAD AND CONTROLLER ONLY. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MW) ESTIMATED RETAIL PRICE $6.000.00(ML-G9300F) ESTIMATED RETAIL PRICE $23.000.00(MLG9310F) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value ... moreor mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your! 1000lbs)
California Laser CO2 Laser Power Supply
For bid 1 CO2 laser power supply. I purchased this item and never user it. The supply comes with manual. There is a key switch on the front but I do not have the key however it can be replaced. According to the manual this power supply will run a 10 watt co2 laser.
Multi-Mega-Watt TEA CO2 Laser Core
This is a first generation RALS TL laser core that produces 3-4 joules/ pulse at up to 5 PPS. The laser operates using an UC/ UC Germanium or Zinc Selenide output coupler and metal overcoat rear mirror of 10 M radius. The core measures 40" x 4" x 4" and the active electrode length is ~ 36" x.75" x.75" Weight ~ 30 LBS. Power load is ~ 40 NF@ 30-40 KVDC. Gas circulation is by external gas loop- see ports on ends. The Laser uses fast corona-glow pre-ionizers and machined 303 Stainless Steel electrodes which are next to impossible to damage. This core was originally used to generate air sparks to trigger high voltage spark gaps for synthetic lightning testing. This type of laser is also used for coating removal and product marking similar to the Lumonics 900 series lasers but has a much shorter pulse width and higher ... morepeak pulse power. New fields of interest are stone restoration and antique surface restoration like brass and copper plaques and ornaments. Also specific paint layer removal. Visit for more info on these applications. Picture 3 shows actual raw beam marks on thermo printer paper showing the beam size and mode line components. The high voltage capacitor and triggered sparkgaps used on the core are sold separately. Picture 10 shows adjustable optic mounts and holders that are recommended to use with the laser core- NOT INCLUDED Picture 11 shows the recommended High Voltage capacitor for use with this laser core- NOT INCLUDED For more information please contact us. Serious inquiries only please.
Exotic Multi-unit TEA CO2 Laser
This is a multi-gas TEA Laser core centered around TEA CO2 gas mix that operates at ~30-40KVDC. This laser core is very unusual in that it consists of(2) separate TEA Laser sections that operate along a common optical axis and use separate modified transverse gas flows for high speed operation. This X-Core was built to test the damage limits of the TI DLP chip as a high speed imaging device. The DLP has a low power damage limit and this unit was used to deliver(2) low power pulses separated by Both units can be driven as a single system which provide a large beam of sufficient power for a lot of apps at 10+ PPS. This unit can also be used with Visible and UV gas mixes which open up photo apps of bio actions where laser power levels need to be low The core is made of G-10 Epoxy so that the optic mounts can be mounted directly on the core. ... moreThe G-10 has very low thermal expansion so this works for stable calibration. Core size is:16.5" x 4" x 3.75" Weight ~ 25 LBS. Each Laser plasma section is ~.875 x.875(95" x 5.5" load is 6-7 NF per section at 40 KVDC. When used with CO2 mixture. Unit produces ~.075 Joule/ pulse with FWHM of The Laser is supplied with full documentation& schematics and all support accessories are available thru Andromeda Laser LLC for a nominal fee. This system has Aluminum electrodes and fast corona-glow pre-ionizers' and is basically like new. We ran this for tests and then lost funding.
Storz CO2 Laser Focusing Coupler #26033LH
SELLING: Storz CO2 Laser Focusing Coupler P/N: 26033LH. Attachment is in good condition. What is shown in the photo is what is offered in the sale. For a list of other items in Inventory offered by APM Asset Management visit our website at the link below: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. BRIAN PETERSON 239-233-6498 280 NATURE VIEW COURT FORT MYERS BEACH. FLORIDA 33931 APMAM.COM
Lumenis Luxar Novapulse LX-20SP CO2 Laser
Lumenis Luxar NovaPulse LX-20SP CO2 Laser The Lumenis Luxar CO2 surgical laser is a precision instrument that offers significant advantages to the surgical practitioner. With potential for use in a multitude of applications as an addition to traditional instruments and techniques. Depending on the clinical application, the Lumenis Luxar laser may be used for: Char-free ablation; Incision or excision; Vaporization or ablation; Providing hemostasis. This laser has been service by a Luxar/Lumenis trained tech, and is in working condition. Please contact me if you have any questions(919) 740-4919. Luxar NovaPulse LX-20SP CO2 Laser Manufacture Date: October 2007 Serial Number: 007-62415 115V ~ 50/60 Hz 10A Laser Aperture(Laser Arm) Support Arm Foot Pedal Key Accessory fan on the first picture is not included; laser arm and support arm are already ... morepackaged for shipment and are not shown the on the 2nd and 3rd picture. 2nd and 3rd picture are of the actual laser you are bidding on. 1st picture is of a like model to show how everything looks when assembled.
Sharplan 30C CO2 Laser System
Sharplan 30 C is a precision instrument that offers significant advantages to the surgical practitioner. With potential for use in a multitude of applications as an addition to traditional instruments and techniques. Depending on the clinical application, the Sharplan laser may be used for: char-free ablation; incision or excision; vaporization or ablation; providing hemostasis. This laser is in working condition. Please contact me if you have any questions(919) 740-4919. Lumenis 30C Laser Manufacture Date: August 1995 Serial Number: 32-011 120 V ~ 60 Hz ~ 3.5 A 7 joint articulated arm is included, but is not attached and may be missing attachment hardware Foot Pedal Key Continuous Wave, Superpulse, or Single Pulse modes Save and recall capability for up to 5 protocols Optional wheel base is included for easy portability
Free USA Shipping With Uvex / Sperian - LSK-YAG/CO2 - Dvo Eyewear Laser Type Yag
Uvex/ Sperian- LSK-YAG/CO2- Dvo Eyewear Laser Type Yag Co2 Featuring: Polycarbonate(POLY) is the lens material found in Yag laser glasses· Weight: 0.28 lb· Laser Type ND YAG. CO2, LSK Frame Design, Visible Luminous Transmission 52 Percent· Optical Density@ Wavelength Greater Than 7@ 1064nm and 10600nm· Uncoated Lens Coating. Light Yellow/Green Lens Color Please Note: Comes with case as show in picture 1& fr ee USPS Priorty Mail shipping. Enjoy Life Everyday and Be Prepared in Every Way. Happy Bidding! By The Way. You Can Get Your Shipping Costs Back From: Freeshipping.com
Synrad Evolution 125 60-1 CO2 Laser w/UC-2000 Controller
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com Description, Synrad Evolution 125 60-1 CO2 Laser w/UC-2000 Controller Used For applications such as Kiss Cutting Multilayer material. Wafer processing, thin film welding, acrylic and die-board cutting, machining of thin metals and high speed coding and marking. Product Type: Type@ Model/Part No:Evolution 125 Our Item ID: 252455 Description Specific Details: Used 125 Watt laser from Synrad with UC-2000 controller and controller power supply. Power supply(RF-3000) for Laser is NOT included. Sold as pictured. Condition: Product Type: Used Terms of sales: 14-Day Warranty Physical Condition: Good 60.00 | 61.00 x 15.00 x 15.00 | 0. Manufacturer"s Product Information: Description: The all-metal sealed tube design and proprietary manufacturing process ensure high gas purity. Essential ... morefor long operating lifetimes. With over 100,000 Synrad lasers operating worldwide, Synrad is the only CO2 laser manufacturer that can boast of proven operating lifetimes in excess of 45,000 hours(at which time, a simple and inexpensive gas refill returns the laser to full operation) The rugged construction of the evolution lasers guarantees high performance and reliability. And the long cavity length provides an inherent power and wavelength stability critical to many applications. Synrad lasers can be operated from 0- 100% duty cycle, with laser power adjusted using a pulse width modulation(PWM) control. The laser is controlled directly with a TTL signal(rear-mounted BNC connector) Alternatively, a DB-9 connector provides remote access to all laser functions, including laser control, fault conditions monitoring, remote interlock, and failure shutdown options. Specific Details: Laser Specifications: Output Power: 125W, Mode Quality: M², Ellipticity Rise Time: Beam Diameter: 4.4mm, Beam Divergence(full angle) 3.2mR, Wavelength: 10.59µm, Power Stability(cold start) ±5% Polarization: Linear(Vertical) Cooling: Water, Heat Load(max) 3000W, Flow Rate
80 watt CO2 Laser Cutting/Engraving Machine - SH G570
This is an 80w Laser Cutting machine from one of the best Chinese manufacturers Shen-Hui I bought from them and imported to California. Paid all import fees and shipping to get it here. Ordered with all the extras(Rotary attachment, chiller, red dot focusing laser, honeycomb worktable) This machine was used for approx 6 hours to test and focus the laser and to assure that it was fully operational. Selling now for much lower then any other seller on Ebay. The lowest you can find these machines is approx $8,000. Here is some technical info from the manufacturer. And in the gallery are some sample engravings from their website as well as pictures of the machin at my storage facility in Lodi, CA where the item will ship from, if you have any questions regarding this listing don't hesitate to ask! Thanks for looking- SH-G570 Laser Engraving/Cutting ... moreMachine. Applicable mateicals Plexiglass.Acrylic,wooden board,plastic,rubber,crystal,ceramic tile,bamboo,grantile,marble,resin etc. non-metal materials. Applicable industry Art gifts.Cloth toy,marble,grantile,crystal,paper product,acrylic etc. industries. Technical parameters Laser power. 80WATTS. Laser type. Hermetic CO2 glass tube. Power supply. AC220±1050 HZ/AC110±1050 HZ. Working area. 700mmx500mm. Max moving speed. 1500mm/s. Locating precision. Min shaping character. Character:3x3mm.Letter:2x2mm. Operating temperature. 5-35. Resolution ratio. 4500dpi. Control configuration. DSP. Data transfer interface. USB(offline) Worktable. Up and down worktable. Syetem environment. WINDOWS 2000/WINDOWS XP. Cooling way. Water cooling and protection system. Graphic format supported. The file which CoreDraw.Photoshop,AutoCAD can dentify(BMP, GIF.JPGE,PCX,TGA,T. Powered by The free listing tool. List your items fast and easy and manage your active items.
Water Cooled CO2 Laser Beam block +filter Shutter + water cooled beam block
Please read before bidding] You are bidding on used High Power CO2 Laser Shutter with filter and water cooled beam block. It has two limit switches(microswitches) indicators in case the shutter does not work you can shut the laser. Excellent condition! see pictures) Subscribe to our mailing list My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! Please ... morenoted we are working 6 days a weak between: 5:00AM(GMT) 14:30(GMT) Sunday throw Friday. WE DON'T WORK IN THE WEEKEND! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price dose not includes V.A.T. Please contact us for shipping and v.a.t. SHIPPING Shipping options: Registered. EMS, UPS. Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office
HP CO2 10791A LASER HEAD CABLE
RECEIVED AS SURPLUS Manufacturer: HP MODEL# CO2 10791A I ONLY HAVE WHAT IS PICTURED-IF YOU WOULD LIKE MORE PICTURES OR HAVE ANY QUESTIONS JUST LET ME KNOW GUARANTEED WORKING
Coherent GEM Series Co2 Laser 1071323 REV AC 10.6µm 48VDC 12A 30w
item weigh: 25lb. Removed from working condition. 14 days money back.
Coherent Gem 50 Co2 Laser Tube w/ Exciter and RF Cable
Coherent GEM 50 Co2 laser tube. Exciter and RF cable. Laser is completely refurbished with one-year warranty. 6 month RF exciter warranty. Laser output is 70 watts on most of our units. The laser and exciter are water cooled giving you thousands of hours of usage. Warranty conditions due apply. Laser makes an excellent replacement for your lower power engraver. Use to upgrade a system that currently uses Coherent GEMS laser tubes. Would make a great laser incorporated into your marking or cutting product. Additional information at Photovac Laser Corporation, Grove City, Ohio. 614.875.3300.
60W CO2 LASER ENGRAVING MACHINE ENGRAVER CUTTER
Stock photos are used above. I can/will send additional pictures of the unit installed upon request* If you are in the market for a new laser engraver/cutter. You have come to the right auction. I purchased this machine brand new from Legacy Lasers, Dec 2012 for $8,000 and have since put less than 200 hours on the tube. Please take a minute to view their site for all the machine specifications and details that I may not have listed here. Why am I selling so soon after purchase? I currently have 2 lasers setup and running, we are moving out of state and will only be taking one machine with us so.one has to go. Our loss will be your gain on this auction. This machine is in perfect condition and operates flawless as designed. Included in this auction is the Series 800 60w machine with tube installed. 6" exhaust fan, CW5000 Chiller, air ... moreassist, bottle rotary attachment, software, two spare focus lens, and 2 brand new 60w spare tubes. If you price the items listed out seperately, you will easily be in the $9,000 plus price range. This machine is currently setup and will be fully demonstrated upon pickup. This auction is"as is" however. Check my feedback and bid with confidence as the machine is as close to brand new as you could possibly get without ordering it from the factory. Local pickup only from Elyria, OH, no shipping offered or implied. Please ask any questions prior to bidding. I am accepting PAYPAL or cash only for this auction. Check my feedback, bid with confidence, and Happy Bidding! Please note that you will need either a pickup truck or full-sized cargo van to pick this unit up. It WILL NOT FIT into a minivan without taking it apart. Engraving/ Cutting Area 35.4 x 23.6" Laser Power 60W Laser Type Co2 Machine Dimensions 53.5 x 39.7 x 40.9" Max Material Height 10.6" by Motorized work table Cutting Depth 3/4" Acrylic Engraving Speed 39"Sec Cutting Speed 23"Sec Resolution(Dpi) Up to 1200 Dpi Position Repeatability.0004" Drive Type Stepper Power Requirement 1
Epilog Mini 18 45 Watt CO2 Laser Engraver Cutting Machine
BUY NOW PRICE $3.000. FOR BUY NOW ORDERS ONLY AT EBAYLOT2013@GMAIL.COM Epilog Mini 18 45 Watt CO2 Laser Engraver/ Cutting Machine Don't let the small size fool you- with a 18" x 12" 457 x 305 mm) work area and 45 watts of CO2 laser power. The Mini 18 is anything but entry-level. Featuring our high-speed, high-precision Accupoint™ Motion Control System(with the most technologically advanced servo motors and linear encoders) the Epilog Mini 18 runs at 30% faster than our Epilog Zing Starter Series and engraves up to 1200 dpi. System Features High Speed Servo Motors Highly Accurate Linear Encoders Automatically Focusing Air Assist to Reduce Flare-Ups Ethernet and USB Networking More Robust. Level Engraving Table 1" thick Integrated Cutting Table Lenses Rated to 500 watts Stainless Steel Bearings Motorized Table Super-Silent™ ... moreCooling Fans Memory in the Machine Easy to Maintain CO2 Waveguide Laser Tubes Integrated Vacuum Table 3D Engraving Mode Stamp Engraving Mode Drop-Down Front Loading Door Moveable Home Position Raster/Vector Color Mapping Strong Kevlar Drive Belts Adjustable Speed and Power on the Fly Made in the USA Quality Engraving Area 18" x 12" 457 x 305 mm) Maximum Material Thickness 4" 102 mm) Maximum Material Thickness with Table Removed 6" 152 mm) 17.5" x 10" 444 x 254 mm) engraving area. Laser Wattage 45 watts Laser Source State-of-the-art. Digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. Intelligent Memory Buffer Store unlimited files up to 64 MB. Rolling buffer allows files of any size to be engraved. Permanent Job Save at the Laser Store up to 10 jobs at the laser. Each up to 2 MB in size. Air Assist Attach an air compressor to our included Air Assist to remove heat and combustible gasses from the cutting surface by directing a constant stream of compressed air across the cutting surface. Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of soft
Ophir OEM Laser Power Meter Sensor for CO2 YAG 60W
Ophir Power Sensor for IR Lasers! This great OEM Thermopile laser power meter is made by. It is model 150C-A-1-C/ERB. Which according to the catalog means: 60W maximum laser power(with a heatsink) Smart Head: only connect +/ 12V and read the output as voltage. Pinout info is included. Calibration: 0.1 Volts/ Watt. the Absorber is optimized for CO2(10.6um) and Er:YAG(2.94um) lasers. Other CW or long pulse lasers should be OK as well(non Q-switched lasers) Please note that this OEM head does NOT need(or compatible with) any power meter display. Instead. It simply needs a common voltmeter for displaying the power output. This head was TESTED and it works great! The absorber surface is in an excellent condition. you can check(see page 8 in this PDF) for some additional data about this meter. Here are some with pinout information and usage notes. ... moreThis item is guaranteed non-DOA! Take a look at my on eBay! Terms and Conditions. If you have any questions regarding this item. Feel free to ask and we'll answer to the best of our knowledge. Payment through Paypal is preferred. a bank wire transfer is also possible. For other methods. Please contact us directly. We ship all over the world. We've shipped countless times to the USA and Europe. And it goes smoothly and quickly. Estimated delivery time is up to 14 days. Our shipping method is EMS(Postal Service Express Mail Service) very reliable from our experience. It has online tracking and insurance is also available for a small fee. We COMBINE SHIPPING for multiple items! this will significantly lower your shipping costs if you buy several items. Please note that any customs duties and taxes are the responsibility of the buyer- however in our experience. In many cases there is no charge. When in doubt, please consult the regulations in your country. Israel residents must pay 17% VAT as required by law. GOOD LUCK BIDDING! Powered by
Luxarcare Luxar LX-20i NovaPulse CO2 Dental Medical Surgical Laser System
Search our eBay Store! Luxarcare Luxar LX-20i NovaPulse CO2 Dental Medical Surgical Laser System SKU: JV-NIC-C-ALUZAR Condition: For parts or not working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Luxarcare Luxar LX-20i NovaPulse CO2 Dental Medical Surgical Laser System Listing Includes: 1x Luxar LX-20i System 1x Luxar LXFR-LF1.0 Wave Guide· P/N: 00867-01 1x Luxar Laser Aperture Pencil 1X Treadlite II T-91-S· 15A 125-250VAC· ½ HP 125-250VAC Physical Condition: Good; Unit has minor scuffs and scratches*Keys Are Included* LX-20 Pulse Mode Power Settings: Average Power Watts ... moremSec Hz% on Mode 2 4 6 8 10 12 14 16 18 20 5 2 1 1 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 5 10 5 2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 5 20 10 3 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 10 2 2 4 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 0.36 0.4 10 10 10 5 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 10 20 20 6 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4 20 20 40 7 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 50 2 10 8 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 100 2 20 9 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4 200 2 40 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 Unit powers on with a working digital display. Service light comes on but buttons seem responsive. We do not have the necessary resources to further test this unit. Power cable is not included. BEING SOLD AS-IS FOR PARTS OR REPAIR. Overall Dimensions(L"W"H" 37* 12 ¾* 69 Please visit the following link for product information(For Informational Purposes Only) Or Visit: Manufacturer's Information(For Informational Purposes Only) The Luxar CO2 surgical laser is a precision instrument that offers significant advantages to the surgical practitioner. With potential for use in a multitude of applications as an addition to traditional instrumen
High Power CO2 Laser Mirror, Silicon 1 inch diameter
This auction is for a high power CO2 laser mirror manufactured by Coherent Optics Division. It has a 1 inch diameter silicon substrate which is 3/16 inch thick. And the coated reflective area is 3/4 inch diameter. It was designed to be used at a 45 degree angle of incidence. Obvious quality for some high power application. A perfect bounce mirror for your CO2 laser. This optic is brand new in the original box. Sealed in an airtight packet. As you probably know, Coherent manufactures some of the best quality laser optics around, and you won't be disappointed with this optic. Be sure to visit my Ebay store. Cheap-Optics, for lots more great deals on mirrors, optics, Newport stuff, and other optical mounts. To quickly find what you need, use the search option at the left of my store to quickly search the many categories of optics in my store. ... morePayment by Paypal is preferred. But also cashier's check or money order. Powered by The free listing tool. List your items fast and easy and manage your active items.
General Laser CO2 Laser Marker LMC-2001 PC
This General laser marker is used untested surplus. It is being sold as is. The physical condition is good and clean. Model No: LMC-2007 PC, ll0- Condition: Sold as is Estimated Packed Shipping Dimensions: Freight Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister AZ# Can't find the answer you're looking for? contact us! Business Hours: 8am to 5pm MST Monday to Friday We are closed on Weekends ... moreand all major US holidays. Arizona Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: eric@usedeqsales.com Phone: 480-322-5025, Fax: 855-233-8618, Mailing Address: All items will ship from UES Arizona Facility. 2877 N. Nevada Street Suite 100 Chandler. AZ 85225 United States of America Arizona Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.8% Sales tax applies to ARIZONA residents(or provide a resale tax ID for our records. A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive the NM or AZ sales tax or a copy of your tax ID. All items will ship from UES Arizona Facility. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling(pos
Ophir Laser Power / Energy Meter For Yag CO2 AR / Dye Lasers / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Ophir Laser Power/ Energy Meter For Yag CO2 AR/ Dye Lasers/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Ophir Laser Power/ Energy Meter For Yag CO2 AR/ Dye Lasers/ Warranty Used Condition Ophir Laser Power/ Energy Meter For Yag. CO2, and AR/ Dye Lasers System powers-up Serial No. 8144 Voltage: 115/230V. 50/60 Hz With AC Power Cord Inventory Number: 20F63172-01-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown ... moreabove. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is UPS for all domestic and in
Grohmann Bestückungsautomat mit Laser Lötanlage DPSS Laser kein CO2 Laser
Grohmann Laser Lötanlage Bei fragen bitte nur anrufen da ich sehr wenig zeit habe 06401 222077 Der Automat legt ein Bauteil auf die Platine und lötet dieses dann fest. Zwei Dioden Laser! Die Lötung erfolgt über zwei automatisch zugeführte Lötzinnrollen. Bleifreies Lötzinn ist derzeit installiert. Siemens Win2000 Serverrechner Siemens AOI und Rechner. Service Unterlagen sind vorhanden. Der Automat ist Inlinefähig Service Unterlagen und Schaltpläne sind Vorhanden Zwei DPSS Lötlaser sind im Kopf verbaut. Der verkauf erfolgt unter Ausschluss jeglicher Genwehrleistung! Es gibt auch keinerlei Nachtverhandlung. Interessenten sollten in Ihrem eigenen Interesse vorbeikommen und sich die Anlage vorher betrachten bzw. Vorführen lassen. Obwohl die Anlage funktioniert wird diese als Defekt verkauft. ... moreIdeal für Wärme empfindliche Bauteile Ich weise Ausdrücklich darauf hin. Das das Gerät kein Spielzeug ist! Im Gegensatz zu CO2 Lasern. Bedingt durch die andere Wellenlänge gehen größere Gefahren durch diesen Laser aus. Der damalige Neupreis lag bei ca. 500K€
Optical Engineering CO2 Laser Spectrum Analyzer Model 16-A
www.meci.com Optical Engineering CO2 Laser Spectrum Analyzer Model 16-A Click image to enlarge. Manufacturer: Part# MECI Part# Condition: Dimensions: Weight: Description: Optical Engineering 16-A 738-1601 Used-Used Good 18” Length. 10” Width, 6 ¾” Height 15.6 Lbs Optical Engineering CO2 Laser Spectrum Analyzer Model 16-A Optical Engineering CO2 Laser Spectrum Analyzer Model 16-A 60Hz 112V 6W Manufactured by: Optical Engineering Part# 16-A Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Payment We accept the following forms of payment: PayPal- We will ship to the address provided on your PayPal payment only. Credit Cards(Visa. MasterCard, American Express& Discover) Please call MECI to make your Credit Card Payment 800-422-3525 ext 5 830am to 500pm EST ... moreMon-Fri Shipping Cost and Policy USA USPS Priority Mail or ground services are used. International Shipped USPS International Priority Mail or USPS First Class International. We will not mark as a gift in any circumstance. Shipping cost does not include import taxes. Duties or brokerage fees, these charges are the buyer's responsibility. Please check with your customs office to determine what additional cost my apply. COMBINED SHIPPING We will combine shipping the best we can. If you purchase other items we will put them in the same box if they can be shipped securely and safely together. Shipping cost at checkout will show the combined charges but additional charges may apply if needed. Please wait to make your payment until you have purchased all items. You have 3 days from the end of the first purchase to add additional items to your order. All of your purchases will be consolidated into one checkout with one payment. SALES TAX- For shipments to Ohio. We are required by State law to collect 7% Sales Tax. STORE PICKUP Please note in checkout the estimated date/time you want to pickup your item(s) Handling fee(if stated) sales tax still apply. Customer Service. Warranty
Luxar Lumenis Novapulse LX-20SP Surgical CO2 Laser System
Luxar Lumenis Novapulse LX-20SP Surgical CO2 Laser System Luxar Lumenis NovaPulse LX-20SP CO2 Laser The Lumenis Luxar CO2 surgical laser is a precision instrument that offers significant advantages to the surgical practitioner. With potential for use in a multitude of applications. It been removed from working condition. This laser has been service by a Luxar/Lumenis trained tech in 2012. Unit in Excellentent Phyiscal Conditon- Please see pictures. No further test can done.
sharplan 30c Co2 Laser Lumenis
2008 Lumenis Sharplan 30C! Gently used! This is a 2008 Lumenis Sharplan 30C. And has been only lightly used. Unit works as it should, performs system check and is fully adjustable between 0-30 watts. Completed automatic system check everytime. Display works perfectly- due to refresh rate the display did not always show up in pictures correctly. But every digit/pixel functions completely 100% and is in excellent working order. Unit can also be used in Superpulse mode. Accessories are as shown. Unit is missing one half of the bottom knuckle cover. But it does not affect use or performance. Unit can be shipped at buyer's expense. Approx. weight is 90 lbs. Seller will delivery free locally in Indiana. Or deliver to the shipper/packer of your choice in the Metro Indianapolis area. Immediate payment required. No warranty. Implied or otherwise ... moreis applicable. This is a Lumines Sharplan 30c Laser- it is the buyer's responsibility to know what this device is. And how it is operated. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f02e6a02e-0xff-
CO2 Laser Head 200mm Focal Set/ For Laser Engraving- Cutting Machine
CO2 Laser Head 200mm Focal Set/ For Laser Engraving- Cutting Machine YOU ARE BIDDING ON: 1- CO2 Laser Head 200mm Focal Set/ For Laser Engraving- Cutting Machine FEEL FREE TO MAKE OFFER. NO REASONABLE OFFER REFUSED PLEASE FEEL FREE TO ASK QUESTIONS! International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. If not listed as new PLEASE make sure you understand the following: They are from a working environment. They are untested and sold as-is. This means they may work fine they may not work at all. ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE DETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* ... morePLEASE CONSIDER THE FOLLOWING WHEN BUYING ITEMS. WE ARE A RESALE WAREHOUSE. WE DO OUR BEST TO DESCRIBE EACH ITEM IN ITS TRUE CONDITION! Freight: Freight prices listed apply only when being shipped to a commercial address that has a loading dock and a receiving forklift. Shipping anywhere that doesn’t have these. Please contact us so we can requote the shipping costs. If you have any question please call JAY Cell 1-574-312-4837 Office 1-855-869-6191 Please check us out on Facebook and“LIKE” us! http:www.facebook.com/RCRecycling Thanks Again RC Resale Warehouse Location: D-Room Listed By: OBE We gladly accept PayPal. Certified Funds, or Cash for local pickups. Shipping price shown is for shipping in the US to lower 48 states only. Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our hours are from 8am-5pm Eastern time. Contact us about combined shipping rates. All items come with a 14 day gurantee unless stated in listing. Buyer pays return shipping unless stated otherwise. NO RESTOCKING FEE. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next busin
SYNRAD FENIX 25W CO2 LASER POWER SUPPLY UNIT x2 with Power Distribution (#085)
SYNRAD FENIX 25W CO2 LASER POWER SUPPLY UNIT x2 15vdc+15vdc = 30vdc Power Distribution board x1 80-017929-02 The apparatus working normally is dismantled
SYNRAD FENIX CO2 LASER SCAN HEAD UNIT FH30-125-107
SYNRAD FENIX CO2 LASER SCAN HEAD UNIT FH30-125-107 75W MAX 10510-10650nm The apparatus working normally is dismantled
COHERENT LASER CO2 OPTIC LENS SEE PICTURES
CO2 LASER OPTIC SEE PICS FOR SPECS COHERENT LASER SEE PICTURES. THANKS FOR LOOKING INVENTORY LOCATION: Bin-12
SYNRAD FENIX-395 CO2 LASER MARKER ***XLNT***
SYNRAD CO2 LASER MARKER SERIAL NUMBER: FENIX-395; INPUT POWER: AC 120/240V; 6/3A 1∅; 47-440HZ EXCELLENT CONDITION PHOTO IS ACTUAL ITEM R1TOP WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Shipping charges for the U.S. will apply as listed. There are no Packaging or Handling fees for regular orders. However. If equipment is needed immediately, evenings, or weekends, an additional fee may be added. International shipments will be handled by USPS unless another carrier is requested. Please call or email with any special instructions and for an exact quote. A discount on shipping may apply if more than one item is purchased. Please call or email for an exact quote. PAYMENT Payment can be made with Paypal. Credit Card, ... moreCashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any remanufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 20:05:36 PDT. Seller added the following information:
CO2 LASER SCANNER HEAD 10mm HAIR REMOVAL WITH OPTIC VIBER LIGHT
Please read carefully before bidding You are bidding on CO2 LASER SCANNER HEAD 10mm HAIR REMOVAL WITH OPTIC VIBER LIGHT the rubber of the optic cable has a small hole but no fibers were damaged. The fiber optic cable works. See picture Subscribe to our mailing list My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! Please noted we are working 6 days ... morea weak between: 5:00AM(GMT) 14:30(GMT) Sunday throw Friday. WE DON'T WORK IN THE WEEKEND! PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price dose not includes V.A.T. Please contact us for shipping and v.a.t. SHIPPING Shipping options: Registered. EMS, UPS, FedEx Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven
LOT OF EIGHT USED PLASMA VACUUM TUBES TETRODES FROM AN ELECTROX M1500 CO2 LASER
NATIONAL ELECTRONICS NL 10277-1 PLASMA VACUUM TUBES(TETRODES) MADE IN FRANCE FROM AN OBSOLETE ELECTROX M1500 CO2 LASER. GLASS INSULATORS INCLUDED. AS WELL AS THE CARDS SHOWN IN PICTURE A. ALL EIGHT TUBES HAVE HUNDREDS OF HOURS OF USE, BUT ARE STILL IN VERY GOOD OPERATING CONDITION AND WERE ALL WORKING WHEN THE M1500 WAS DECOMMISSIONED. EMAIL WITH ANY QUESTIONS. ANY OFFER WILL BE CONSIDERED. SO GIVE IT A TRY! NOTE TO INTERNATIONAL BIDDERS: SHIPPING IS FREE IN THE USA ONLY. SHIPPING IS $100 INTERNATIONALLY. OTHER THAN CANADA AND MEXICO, WHERE I WILL REDUCE THE CHARGE TO THE ACTUAL SHIPPING FEES. IF YOU ARE AN INTERNATIONAL BIDDER AND HAVE AN ADDRESS IN THE USA WHERE YOU WOULD LIKE TO SHIP THIS LOT, I WILL DO THAT FOR FREE.
Optical Eng. Macken Instruments YAG / CO2 High Power Laser Power Meter Probe
This sale is for one: P-10K Laser Power Measurement Probe. This product is manufactured by Macken Instruments for Optical Engineering and Directed Light. Measures laser power for YAG(900-1250 nm) and CO2(8-11 microns) Laser measurement range from 0 to 10000 watts. This probe is tested and fully operational. Laser power measurements are quick and easy with the P-10K. Position the power meter in front of the laser beam(as shown in the photo) and 20 seconds later read the power measurement. It does not involve a time consuming setup and alignment like other power meters. Unfortunately. Most laser power meters have sacrificed ease of use to gain continuous power readings. However, in most laboratory and production situations, the usual requirement is for a quick spot-check of power with a minimum of disruption. This power probe is a calorimeter ... moretype power meter which measures laser power using a timed exposure. It will display the average power absorbed on the calibrated readout scale and can be used with continuous or repetitively pulsed lasers. Key Features of this probe are: The absorbing probe head is conveniently sized. The head is large enough to be easily used. Yet small enough to be inserted between optical components to measure the laser power without disturbing set-up. The hand-held meter requires only about one minute to make a laser power measurement, The absorbent coating is very tough. Resisting mechanical abrasion and water immersion, A zero adjustment mechanism has been incorporated into the design to expedite and simplify the power measurement process, An accurate and durable all metal construction has been used to ensure a long life, Taking Measurements The P-10K power probe is a self-contained unit consisting of an absorbing head. A temperature measuring mechanism, a zeroing knob and a readout dial. In operation, the dial is zeroed. Then, the absorbing head on the end of the power probe is exposed to the laser beam for 20 seconds. After the laser probe is removed from the laser beam. The aver
PHOTON SOURCES INC. OEM CO2 LASER BEAM BENDER 90 DEGREE 176597
LASER BEAM BENDER co2 5 AVAILABLE PULLED FROM PHOTON LASER SEE PICTURES THANKS FOR LOOKING.
Luxar Lumenis Novapulse LX-20SI CO2 Laser WARRANTY
Luxar(Lumenis) LX-20SI 20 watt CO2 laser system System also sold under the Accuvet trade name for Veterinary Use Meets full factory specifications. Full tube power. I ncludes: LX-20SI Laser System 20 watts of CW power(this SI model is same as the Novapulse LX-20SP without the SuperPulse feature) 30 day warranty(USA and Canada only) Key. Foot Pedal, Power Cord Operators Manual 3 straight handpieces 3 pair laser eyewear Waveguide. Mast, Support Arm Packing and Shipping in custom box System sold New for over $30.000! Sometime easier to get specifics on laser by speaking directly to our sales team. Call directly at 317-570-0448 If interested. Please contact us. We are always happy to do a Live Skype Videocall Demonstration or to videotape the system in operation and upload to YouTube for your viewing. We sell only from inventory we have in stock ... moreand has been fully inspected and prepared for sale. Unit is in stock and ready to be packed and shipped. Will ship worldwide. Interested parties are invited and encouraged to contact us with any questions or offers. We reserve the right to cancel the auction early as this unit has been listed locally and through other venues. Payment and Shipping: We will ship and deliver your system as soon as funds have been received and verified. If paying by check. Will hold until check clears completely. Accepted Forms of Payment: Cashier's Check or Bank-to-Bank Electronic Funds Transfer(No PayPal) We will crate and ship internationally. Buyer responsible for all shipping, duties and taxes. Please call with any questions to 317-570-0448 Pictures shown are the actual unit! Please contact me directly to arrange payment and delivery. Taxes: 7% Indiana Sales Tax will be added only on sales to Indiana buyers.
CO2 Azuryt CTL 1401 Dental Laser
2008 CO2 Azuryt CTL 1401 is a medical unit designed for a wide range of applications e.g. in dentistry. Laryngology, dermatology, esthetical surgery, gynaecology, general surgery, oncology, and many others. It is intended for a non-contact surgery, vaporisation, and coagulation. Dentist purchased an existing dental practice and this equipment was already there but we do not need it.
C100781 GCC LaserPro Venus V-12 CO2 12W 12 Watt Laser Engraver Engraving Machine
C100781 GCC LaserPro Venus V-12 CO2 12W 12 Watt Laser Engraver Engraving Machine(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C100781 This GCC LaserPro Venus V-12 CO2 12W Laser Engraver looks to be in good cosmetic condition. Showing some signs of wear. It powers up, as shown in the photos above, and the digital display is bright and clear, and it responds to input from the buttons, and the engraving head emits a red aiming laser. I was able to get the stage to move up and down, and the engraving head to move side to side and back and forth using the keypad buttons. I'm not sure how to make it actually do some laser engraving. This is the extent of my testing of this machine. I lack the knowledge ... moreand equipment to formally test this system, so it is being sold as-is. It comes with one cable, that is plugged into the back of the unit, as shown. I do not have any other accessories or software for it. It comes as shown in the photos above. Approximate overall unpacked dimensions 25"L x 22"W x 20"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 80.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a
Lasersonics Illumina 740 CO2 Surgical Laser
Lasersonics Illumina 740 CO2 Surgical Laser Please read our policies below including those on shipping BEFORE bidding! We are pleased to announce new payment options: For local orders or upon special request we accept: Visa and MasterCard Directly. Checks, and Wire Transfers! Buy with confidence from#1 rated medical seller online. As an accredited business we maintain an A+ Better Business Bureau Rating and we take pride in putting our customers first! 30 Day Warranty! Recent Biomed Inspection! See Picture) Laser Works Great! See our pics of burning wood) Manual Included! Just removed from a bankrupt facility! Dealer Priced to sell! Buy with confidence from#1 rated seller online! No Reserve! Any questions about this item. Please contact Dylan Redd At 770-939-5971 or Cell# 404-403-1125 We offer dealer prices to the general public! Click the ... moreIcon next to our name to visit our Ebay Store and view our Incredible Year-Round Values! We Pride ourselves on being 25% CHEAPER than Anyone online! PLEASE NOTE: QualityMed. Inc. makes absolutely nothing on shipping whether it be freight or Fed Ex. So PLEASE. PLEASE when leaving feedback, and the Detailed Seller Ratings{DSR}s… Please do not leave us a 4 out of 5 on the shipping and handling charges. Please understand that 4 out of 5 according to Ebay is a FAILING score which costs us literally thousands of dollars and puts us in the bottom of the search listings. Currently our rating under shipping and handling fees is a 4.55 out of a possible 5. This is a FAILING score. Anything less than a 4.7 is failing. So please. Please do not give us a 4 on the DSR ratings. If you have any problems with our service please let us know BEFORE leaving the DSR ratings or bad feedback. We strive very hard to process all orders quickly and effectively. Thank You for your consideration. Sincerely. Dylan C. Redd Return Policy and Guarantee: THIS EQUIPMENT IS OFFERED WITH OUR AS-REPRESENTED GUARANTEE: For U.S. shipping addresses within the lower 48 states. This equipment is
Laser Sonics Laserscope Heraeus Paragon 50 Watt Co2 Surgical Laser Permaline
Laser Sonics Laserscope Heraeus Paragon 50 Watt Co2 Surgical Laser Permaline- Warranty! Please read our policies below including those on shipping BEFORE bidding! We Warranty all goods with a 30 Day“No Questions Asked” return policy. We are pleased to announce new payment options: For local orders or upon special request we accept: Visa and MasterCard Directly. Checks, and Wire Transfers! Buy with confidence from#1 rated medical seller online. As an accredited business we maintain an A+ Better Business Bureau Rating and we take pride in putting our customers first! 30 Day Warranty! Nice 110 Volt 50 Watt Laser· Works and Looks Great· Just removed from a bankrupt facility Any questions about this item. Please contact Dylan Redd At 770-939-5971 or Cell# 404-403-1125 We offer dealer prices to the general public! Click the Icon next ... moreto our name to visit our Ebay Store and view our Incredible Year-Round Values! We Pride ourselves on being 25% CHEAPER than Anyone online! PLEASE NOTE: QualityMed. Inc. makes absolutely nothing on shipping whether it be freight or Fed Ex. So PLEASE. PLEASE when leaving feedback, and the Detailed Seller Ratings{DSR}s… Please do not leave us a 4 out of 5 on the shipping and handling charges. Please understand that 4 out of 5 according to Ebay is a FAILING score which costs us literally thousands of dollars and puts us in the bottom of the search listings. Currently our rating under shipping and handling fees is a 4.55 out of a possible 5. This is a FAILING score. Anything less than a 4.7 is failing. So please, please do not give us a 4 on the DSR ratings. If you have any problems with our service please let us know BEFORE leaving the DSR ratings or bad feedback. We strive very hard to process all orders quickly and effectively. Thank You for your consideration. Sincerely. Dylan C. Redd Return Policy and Guarantee: THIS EQUIPMENT IS OFFERED WITH OUR AS-REPRESENTED GUARANTEE: For U.S. shipping addresses within the lower 48 states. This equipment is guaranteed to be as we re
R. WOLF LAPAROSCOPY CO2 LASER PANOVIEW 0 DEGREE SCOPE
R.Wolf Laparoscopy CO2 Laser Panoview 0 Degree Scope Includes: 1) R.Wolf Laparoscopy CO2 Laser Panoview 0 Degree Scope This scope is used. But has a great view Regardless of the few dents in the shaft. Please see pictures for cosmetic condition) Sold as is. 14 Day Return Policy Any questions send us a message through eBay. SHIPS FROM THE U.S.A. VIA FEDEX or USPS. International Customers: Please Email Postal Codes For Accurate Shipping Costs Before Submitting Payment Shipping May Be Less Than The eBay Calculation!PLEASE READ ALL POLICIES BELOW! The sale of this item may be subject to regulation by the U.S. Food and Drug administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser ... moreof this item before shipping the item. DISCLAIMER: Regardless of the origin of the equipment. Documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer. INTERNATIONAL PURCHASER IS RESPONSIBLE FOR ANY& ALL CUSTOMS RELATED ACTIVITIES SUCH AS: Determining if these types of goods are allowed to be imported into your country. Etc. Determining if your country requires these types of goods to be shipped to an individual or a corporation. etc. Acquiring any and all Certificates or Licenses needed to receive this equipment.etc. Paying any& all Customs Related Duties Taxes Fees etc. We will not under-value an item on the customs for Returns: If you feel the item is not as described in the listing or is not working properly please contact us imm
Sharplan 1055S CO2 Laser
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Sharplan 1055S CO2 Laser with alot of extras included SOLD AS-IS as shown on the pictures, All sales are final. Anything else not mentioned is not included* If you are not a serious bidder. Please do not bid on the item. Please ask all of your questions in advance of purchase. If you do not ask questions. And just purchase the unit, we are not held responsible for refunding your money if the item doesn’t work. Any questions about this item. Please contact Victor At 775-830-6090 or by email at victor@omednevada.com The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid ... moreon this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. OMED of Nevada LLC. Is a provider of new and pre-owned medical equipment, of all modalities, serving private clinics, imaging and surgery centers and hospitals worldwide. OMED of Nevada LLC also provides a direct source for: defibrillators, microscopes, infusion pumps, OR scopes, laboratory, ICU monitoring, surgical monitors, endoscopes, beds, stretchers, NEW and used OR tables, OR lights, anesthesia machines, respiratory, EKG, and electro surgical units. As an integral part of a complex industry. We take pride in our expertise and ability to satisfy our customers. Shipping and Handling• ITEMS WILL BE SHIPPED ONCE FUNDS HAVE CLEARED. Our normal handling time is 2 business days(excluding weekends and holidays) after funds have cleared. In the event of a return; Return Shipping Charges is the responsibility of the Bidder. It is the responsibility of the customer to return the goods safely to us before we return the purchase price. Items are shipped via FedEx Ground Service. If
LaserSonics Hercules 5100 Co2 CO2 Surgical Laser
LaserSonics Hercules 5100 Co2 Laser Please read our policies below including those on shipping BEFORE bidding! Please inquire about additional payment methods. For Local Orders that are picked up at our facility we can accept Visa. Mastercard, Checks, and Wire Transfers, Buy with confidence from#1 rated medical seller online. As an accredited business we maintain an A+ Better Business Bureau Rating and we take pride in putting our customers first! For more info about our company feel free to visit the‘about me” page. Click the icon next to our Ebay username. There you will find a link to our website and more. 30 Day Warranty! We were told by bimed that the laser is in working condition. However we do not have the fiber cable to test. Dealer Priced to sell! Buy with confidence from#1 rated seller online! No Reserve! Any questions about this ... moreitem. Please contact Dylan Redd At 770-939-5971 or Cell# 404-403-1125 We offer dealer prices to the general public! Click the Icon next to our name to visit our Ebay Store and view our Incredible Year-Round Values! We Pride ourselves on being 25% CHEAPER than Anyone online! PLEASE NOTE: QualityMed. Inc. makes absolutely nothing on shipping whether it be freight or Fed Ex. So PLEASE. PLEASE when leaving feedback, and the Detailed Seller Ratings{DSR}s… Please do not leave us a 4 out of 5 on the shipping and handling charges. Please understand that 4 out of 5 according to Ebay is a FAILING score which costs us literally thousands of dollars and puts us in the bottom of the search listings. Currently our rating under shipping and handling fees is a 4.55 out of a possible 5. This is a FAILING score. Anything less than a 4.7 is failing. So please. Please do not give us a 4 on the DSR ratings. If you have any problems with our service please let us know BEFORE leaving the DSR ratings or bad feedback. We strive very hard to process all orders quickly and effectively. Thank You for your consideration. Sincerely. Dylan C. Redd Return Policy and Guarantee: THIS EQUIPM
Sharplan 14200 CO2 Fiber Adaptor Laser Hand Piece
Sharplan 14200 CO2 Fiber Adaptor Laser Hand Piece Please read our policies below including those on shipping BEFORE bidding! Please inquire about additional payment methods. For Local Orders that are picked up at our facility we can accept Visa. Mastercard, Checks, and Wire Transfers, Buy with confidence from#1 rated medical seller online. As an accredited business we maintain an A+ Better Business Bureau Rating and we take pride in putting our customers first! Please feel free to visit our website at www.qualitymedinc.com 30 Day Warranty! Just removed from a bankrupt facility! Stunning Condition! Works and Looks Great! Dealer Priced to sell! Buy with confidence from#1 rated seller online! No Reserve! Any questions about this item. Please contact Dylan Redd At 770-939-5971 or Cell# 404-403-1125 We offer dealer prices to the general public! ... moreClick the Icon next to our name to visit our Ebay Store and view our Incredible Year-Round Values! We Pride ourselves on being 25% CHEAPER than Anyone online! PLEASE NOTE: QualityMed. Inc. makes absolutely nothing on shipping whether it be freight or Fed Ex. So PLEASE. PLEASE when leaving feedback, and the Detailed Seller Ratings{DSR}s… Please do not leave us a 4 out of 5 on the shipping and handling charges. Please understand that 4 out of 5 according to Ebay is a FAILING score which costs us literally thousands of dollars and puts us in the bottom of the search listings. Currently our rating under shipping and handling fees is a 4.55 out of a possible 5. This is a FAILING score. Anything less than a 4.7 is failing. So please. Please do not give us a 4 on the DSR ratings. If you have any problems with our service please let us know BEFORE leaving the DSR ratings or bad feedback. We strive very hard to process all orders quickly and effectively. Thank You for your consideration. Sincerely. Dylan C. Redd Return Policy and Guarantee: THIS EQUIPMENT IS OFFERED WITH OUR AS-REPRESENTED GUARANTEE: For U.S. shipping addresses within the lower 48 states. This equipm
Coherent Diamond C30L Series Industrial CO2 Liquid Cooled Laser 30W
1x Coherent Diamond C30L Series Industrial CO2 Liquid Cooled 30W Laser This sale is for one Coherent C30L Laser with mounting plate. This item was pulled out of a clean room and appears to look like new and was hardly used. However, it is being sold as-is, as described. Accessories. Software, manuals, original packing not included other than what is pictured or described. Buyer will have t he option of purchasing an additional. Identical Coherent Diamond C30L Laser. Please make sure you know what you are bidding on and if you have any questions. Please feel free to contact us. If you are the winning bidder please wait for an invoice BEFORE paying. Canadian buyers will be responsible for any G.S.T.H.S.T taxes applicable. We ship Internationally and International buyers are responsible for any customs or duty fees incurred. Please contact us ... morefor shipping rates.
Synrad model J48-2SW-6648 Co2 Laser with Power One Supply, Arm and Extra's
25 watt Co2 Laser Synrad model J48-2SW-6648 comes with 1. Power One supply with ac power and dc power cable with connectors. 2. Articulated arm with gas supply hose and inline filter for hand pieces. 3. 5 hand pieces with optics and ¼ turn end effectors 5. Guarantied working. Picture of wood being burned is actual laser listed in this auction. 6. This laser was purchase for a plastic cutting project I decided not to build and it has just sat since I purchased it other then to show it works which was just before listing the unit. N Note: Laser has been tuned for cutting plastics. More information about this laser can be had from Synrad by suppling the complete model and serial number. Wood. Controller and control cables NOT supplied. Total Weight of 37 lbs. Note: This is not a toy and should be treated with respect. DO NOT attempt to. ... morePower up this laser without a proper controller or you could damage the. Internal drive electronics. All the information needed for safe operation can be had from Synrad's web site. If bidding on this auction you should have the knowledge to safely operate and use high powered lasers. Thank you for looking.
SHARPLAN 40C CO2 LASER
Sharplan 40C CO2 Laser. This came from working hospital and was working. The sale of these items may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item
Directed Energy 60W CO2 Laser VERY NICE!
Directed Energy. Inc. Model# L35PS, 60W CO2 laser in great condition, with very little signs of wear. This item has been well cared for. If you have any other questions please don't hesitate to ask. Dimensions 38"L x 4"T x 2 1/2"W
LSI PRF-150F 45 Watt CO2 Laser Science Programmable System
LSI PRF-150F 45 Watt CO2 Laser Science Programmable System Description LSI PRF-150F Laser Science Inc. Programmable CO2 Laser System 45 watt. 10.6 Micro Meters Main Power Supply Trigger Generator Gas Control Wideband. Low power Modulator 115VAC Input Power Required We were able to power this item. Connected coolant lines etc, All safety lights went off including filament low temp. We did not take it any further due to the fact that we do not have N2, He, Co2 Gas that this unit requires with a flow of 2.75 lbs pressure Manufacturer LSI Manufacturer Part Number PRF-150F Item/Ship Weight 940 LBS Tech Condition This item is used and has been tested to be in good working condition. We were able to power this item. Connected coolant lines etc, All safety lights went off including filament low temp. We did not take it any further due to the fact ... morethat we do not have N2, He, Co2 Gas. This product can be previewed at our facility in Ventura, Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 35754 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico,
Keyence CO2 Laser Marker System ML-9310F 80W Head/ML-9300 Controller
THIS IS A COMPLETE SYSTEM. INCLUDING ALL CABLES AND SOFTWARE($2000 VALUE) PLUG IT IN TO A COMPUTER AND YOU ARE READY TO GO. Item is a Keyence CO2 laser marker system: Controller(ML-G9300) CO2 Laser Head(ML-G9310F) UNIT IS This is a laser marker system for high speed(production line) marking of numbers. Bar codes and other graphics. Software allows a variety of marking patterns to be input either via software or printer emulation(print directly from MS-Word, etc. This unit was from medical device R&D lab and used very little. Unit is very clean and complete with everything at purchase. Includes all power and communication cables, software and user manual. Controlled via USB cable(included. Unit is still currently manufactured model. All specifications can be viewed at for head and for controller. Price New is $30.000 USD Item in operative ... morecondition as of time of shipment.
HIT Horiuchi Intelligence Technology LSS-S050VAH LSSS050VAH CO2 Laser Marker
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal ... more0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE HIT Horiuchi Intelligence Technology LSS-S050VAH LSSS050VAH CO2 Laser Marker Item Condition: Used Quantity: 1 unit Actual Weight: 13.4kg Dimension: 69X14x16- Comes with 14 days money back guarantee. We ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current ph
CO2 Laser Mirror Zero Phase @9.4 microns CQE
This auction is for a Coherent Laser mirror for a CO2 carbon dioxide laser operating at 9.4 microns. The mirror is made of silicon. And is 1.5 inches in diameter, and 4mm thick This mirror is a zero phase retarder mirror at 9.4 microns, and is what is called a cut quality enhancer(CQE) This is a very special mirror for your machining applications, and is in absolutely new condition, still hermetically sealed in the foil pouch. Pick up a spare mirror for your laser at a small fraction of the new cost. This optic is brand new in the original plastic container. As you probably know. Coherent manufactures some of the best quality laser optics around, and you won't be disappointed with this optic. Be sure to visit my Ebay store. Cheap-Optics, for lots more great deals on mirros,optics, Newport stuff, and other optical mounts. Payment by Paypal ... moreis preferred. But also cashier's check or money order. Powered by The free listing tool. List your items fast and easy and manage your active items.