In 
 
Order by: 
Available to: 
Price: 
 - 
$
70.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a single 1.6 W 450nm laser module. Unit is upgraded with a copper module for max cooling and stability. It is prewired with a 1.8A X-Drvie ... morebucking laser driver and comes with a 405-450nm coated three element glass lens. The unit is ready to be dropped into your final project. No setting current or soldering diode to driver. Just place in heatsink and connect leads to your power supply. Here is the info on the diode. Datasheet Check out this thread for details. Osram 1.6W PLTB450B 450nm Laser Diode Input voltage range is 6V-8.4V. Great for use with two Li-Ion's or Lipo's. Suggest two 16340/18350/18650 3.7V Li-Ion's or 3.2V Lipo's. You can also use a 6-8V 2A wall adapter or bench power supply. Here is what you get. The X-Drive is encased in the back of the model connected to the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. Wire assignment is: Red + Black- Wavelength 445nm +/ 5nm. Input Voltage 6V-8.4V. Driver Output Current 1800mA. Driver Current Draw 1.4A +/ 0.5A. Power Output 1.5W-1.8W. Driver Type Constant Current. Lens M9x0.5mm Threaded Three Element Glass Lens. Reverse Polarity Protection Yes. Duty Cycle 120 seconds on 30 seconds off with proper heatsinking. If this is your first laser build here is a great place to start. The. I want to build a laser" Thread If you are looking for a host here are some of the more popular host/heatsink kits that will work with these diodes and if you want something that is not listed in those links that I show in my tutorials below shoot me a message and I can point you in the right direction for them. Host Kits/Heatsinks Here is one of my favorite hosts. The Sirius 1-C Here is a list of all the items that I carry. Here is a list of tutorials I have made and experiments that can help give you ideas for your next project. Check Out My Reviews& Build Tutorials* Shipping is Free in the US International First Class mail"Not Tracked" Delivery estimate is 10-30 busi
$
48.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a brand new single Oclaro 700m W 638nm laser diode in a copper 12mm module with leads and Aixiz three element glass lens. The copper module ... moreupgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Oclaro HL63193 638nm 700mw Diode. Save yourself the headache of pressing and soldering. Just add heatsink and driver. The current must be limited the diode.1100mA max suggested) Don't attempt to connect directly to a battery or you will damage this diode. This is the diode that everyone has been talking about. Modules are fully tested to be in working order and the leads will have the ends twisted and soldered together for ESD protection. Please use all ESD precautions and short your driver leads discharging any capacitors before hooking up your driver to this module. Data Sheet Here is what you get. A single brand new module with leads including a case lead if you need it. Wire assignment is: Red + Black- White Case Please note These are multi-mode display diodes similar to the 1W+ 445nm diodes. Check these threads for info on output and beam correction. Here are some more threads about these diodes. Running off my bench power supply and encased in a finned heatsink. Check out these awesome shots. Finned heatsink not included) Oclaro 700mW 638nm Diode(HL63193MG) First thing I did was to compare the divergence to a Mitsubishi ML520G71 diode both using a standard G-2 glass lens. While it is a fraction smaller when I actually measured it they are nearly the same but the new Oclaro has less light concentrated in the wings and splash and of course 400mW more power. So with that said lets get on with the power test with a G-2 lens. So there we have it the Oclaro 700mW 638nm diode. Hopefully this helps bring this diode into perspective. If this is your first laser build here is a great place to start. The. I want to build a laser" Thread Diodes are current h
$
78.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a brand new single Oclaro 700m W 638nm laser diode in a standard 12mm copper module with Flexdrive bucking laser driver set to 1.1A and ... morea Three Element Glass lens putting out over 500mW after optics. If you need 700mW see the option with the high pass G-2 lens. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Perfect for running off a single rechargeable 3.7V Li-Ion or a 5V 2A wall adapter. Unit is ready to be dropped into your final project. Just throw in a heatsink and apply power source. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. Data Sheet Here is what you get. The driver is contained in the module. You can discard the back half if you need the extra room just be careful not to let the driver short on anything. Wire assignment is: Red + Black- Specs Wavelength 638nm +/ 5nm Input Voltage 3.2V-5.5V Driver Output Current 1.1A(default) Driver Current Draw 950mA +/ 0.5A Power Output 500mW-700W Driver Type Constant Current Lens 9mm Threaded Three Element(Aixiz) Glass Lens Reverse Polarity Protection Yes Duty Cycle Continuous with proper heatsinking Please note These are multi-mode display diodes similar to the 1W+ 445nm diodes. Check these threads for info on output and beam correction. Here are some more threads about these diodes. Running off my bench power supply and encased in a finned heatsink. Check out these awesome shots. Finned heatsink not included) Oclaro 700mW 638nm Diode(HL63193MG) First thing I did was to compare the divergence to a Mitsubishi ML520G71 diode both using a standard G-2 glass lens. While it is a fraction smaller when I
$
35.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
This is the most powerful 405 diode available currently. Save yourself the headache of extracting, pressing and soldering on your diode. Just add host, ... moreheatsink and driver.The current must be limited to no more than 700mA to the diode suggest 600mA for best life expectancy.
$
91.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a brand new single Oclaro 700m W 638nm laser diode in a standard 12mm copper module with Flexdrive bucking laser driver set to 1.1A and ... morea high pass G-2 glass lens. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Perfect for running off a single rechargeable 3.7V Li-Ion or a 5V 2A wall adapter. Unit is ready to be dropped into your final project. Just throw in a heatsink and apply power source. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. Data Sheet Here is what you get. The driver is contained in the module. You can discard the back half if you need the extra room just be careful not to let the driver short on anything. Wire assignment is: Red + Black- Specs Wavelength 638nm +/ 5nm Input Voltage 3.2V-5.5V Driver Output Current 1.1A(default) Driver Current Draw 950mA +/ 0.5A Power Output 700mW-1W Driver Type Constant Current Lens 9mm Threaded Three Element(Aixiz) Glass Lens Reverse Polarity Protection Yes Duty Cycle Continuous with proper heatsinking Please note These are multi-mode display diodes similar to the 1W+ 445nm diodes. Check these threads for info on output and beam correction. Here are some more threads about these diodes. Running off my bench power supply and encased in a finned heatsink. Check out these awesome shots. Finned heatsink not included) Oclaro 700mW 638nm Diode(HL63193MG) First thing I did was to compare the divergence to a Mitsubishi ML520G71 diode both using a standard G-2 glass lens. While it is a fraction smaller when I actually measured it they are nearly the same but the new Oclaro has less light concentrated in the
$
85.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Here is what you get. One 9mm 4W NUBM07 465nm diode mounted in a 12mm x 30mm copper module with leads. This diode is an amazing shade of blue and is capable ... moreof over 4W output when using a G-2 lens and 4A current with proper heatsinking.
$
61.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a brand new single Oclaro 700m W 638nm laser diode in a copper 12mm module with leads and G-2 lens. The 405-G-2 lens has been tested to ... moregive about around a 30% increase over the Aixiz three element glass lens. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Oclaro HL63193 638nm 700mw Diode. Save yourself the headache of pressing and soldering. Just add heatsink and driver. The current must be limited the diode.1100mA max suggested) Don't attempt to connect directly to a battery or you will damage this diode. This is the diode that everyone has been talking about. Modules are fully tested to be in working order and the leads will have the ends twisted and soldered together for ESD protection. Please use all ESD precautions and short your driver leads discharging any capacitors before hooking up your driver to this module. Data Sheet Here is what you get. A single brand new module with leads including a case lead if you need it. Wire assignment is: Red + Black- White Case Please note These are multi-mode display diodes similar to the 1W+ 445nm diodes. Check these threads for info on output and beam correction. Here are some more threads about these diodes. Running off my bench power supply and encased in a finned heatsink. Check out these awesome shots. Finned heatsink not included) Oclaro 700mW 638nm Diode(HL63193MG) First thing I did was to compare the divergence to a Mitsubishi ML520G71 diode both using a standard G-2 glass lens. While it is a fraction smaller when I actually measured it they are nearly the same but the new Oclaro has less light concentrated in the wings and splash and of course 400mW more power. So with that said lets get on with the power test with a G-2 lens. So there we have it the Oclaro 700mW 638nm diode. Hopefully this helps bring this diode into perspective. If this is your first laser build her
$
125.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Nichia NDG7475 1W 520nm Laser Diode. So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2. ... moreHere is what you get. One 9mm 1W 520nm diode mounted in a 12mm x 30mm copper module with leads.
$
115.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Here is what you get. One 9mm 4W NUBM07465nm diode mounted in a large 25mm x 30mm copper module with leads. This diode is an amazing shade of blue and ... moreis capable of over 4W output when using a G-2 lens and 4A current with proper heatsinking.
$
15.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Sun Valley, United States
These mounts allow improved thermal coupling from the diode module to the mount. Aluminum 12mm diode module holder/mount for Aixiz style 12mm diode modules.
$
20.00
Buy It Now
$8.09 Shipping
Condition: New
Location: Sun Valley, United States
Aluminum 12mm diode module holder/mount for Aixiz style 12mm diode modules. These mounts allow improved thermal coupling from the diode module to the ... moremount.
$
37.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
It can not handle the power this unit can put out. It will keep contaminates out of the module until you are ready to put yours glass lens in. Replace ... morewith your glass lens of choice before powering the module.
$
130.00
Buy It Now
Free Shipping
Condition: New
Location: Holland, United States
AixiZ Version of the G2 lens.
$
20.00
Buy It Now
Free Shipping
Condition: New
Location: China
(4) Suitable for blue laser module/Blue laser Torch/Blue laser Pointer/12x30mm host of Aixiz.
$
17.90
Buy It Now
Free Shipping
Condition: New
Location: China
(4) Suitable for red laser module/red laser Torch/red laser Pointer/12x30mm host of Aixiz. Other Countries. UK, CA, AU, DE. Expedited Service.
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: China
(4) Suitable for blue laser module/Blue laser Torch/Blue laser Pointer/12x30mm host of Aixiz.
$
40.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Osram 1.6W PLTB450B 450nm Laser Diode. Here is a test of the new PLTB450B 1.6W 450nm diode from Osram. Tested 5 of these so far and they all seem to average ... moreabout 2W @ 1.8A with a G-2 where the M140 averages around 2.3W @ 1.8A.
$
19.00
Buy It Now
Free Shipping
Condition: New
Location: China
(4) Suitable for red laser modul/laser Pointer/12x30mm host of Aixiz.
$
15.30
Buy It Now
Free Shipping
Condition: New
Location: China
(4) Suitable for blue laser module/Blue laser Torch/Blue laser Pointer/12x30mm host of Aixiz. Other Countries. UK, CA, AU, DE. Expedited Service.
$
3.30
Buy It Now
$2.50 Shipping
Condition: New
Location: Houston, United States
Laser Shape: Line (5, 28, 45, 60, 90, 120 degrees or Cross). Lens Wavelength: 200nm-1100nm. Lens: PMMA.
$
4.75
Buy It Now
$3.50 Shipping
Condition: New
Location: Houston, United States
Cooling effect is very good. Suitable for 12mm red, green, blue-violet light or IR laser module. Round laser heat sink module. Quantity: 21CS heat sink. ... moreMaterial: Aluminum.
$
15.00
Buy It Now
$2.50 Shipping
Condition: New
Location: Houston, United States
650nm 5mW red laser diode / red LD module light source. Output Powe: 5mW. Notes: For DYI and laser hobbyists.
$
9.00
Buy It Now
$2.50 Shipping
Condition: New
Location: Houston, United States
This glass lens is now coated to work AR with 400-455nm applications. This lens will will fit the 12X30mm modules and blank module sets. Recommended for ... moreany power level over 50mw in home-brew projects or for those that would prefer glass lensing. This lens will also fit all our 12X30mm crosshair and line generator products(remove plastic lens and insert glass one) You are purchasing the glass lens only. The module is shown for reference purposes. AixiZ Service and International LLC 10503 Sageyork Drive. Houston, Texas 77089 USA AixiZ LLC is licensed laser manufacturing and service company for Class IIIA. IIIB and IV products under Texas license#Z02105. We are a certified US Government supplier CAGE code 4MF77 AixiZ will combine shipping with other products.
$
4.50
Buy It Now
$3.50 Shipping
Condition: New
Location: Houston, United States
This is a high quality aluminum heatsink/heat sink holder for 12mm laser modules like 12mm red, green and IR laser modules. 1 x Aluminium Cooling Heatsink ... morefor 12mm Laser Modules Heat Sink 20x27x32mm Blac.
$
71.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Unit is ready to be dropped into your final project. This is the most powerful single mode 405 diode available currently. Wavelength 405nm +/- 5nm. 900mW ... more405nm 16X BDR-209DBK Diode. Here is what you get.
$
96.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a single Nichia NDB7875 445nm laser module. Unit is upgraded with a highly thermaly conductive copper module for max cooling and stability. ... moreIt is prewired with a 2.1A X-Drvie bucking laser driver and comes with a three element(Aixiz) glass lens. The unit is ready to be dropped into your final project. No setting current or soldering diode to driver. Just place in heatsink and connect leads to your power supply. Input voltage range is 6V-9V. Great for use with two Li-Ion's or Lipo's. Suggest two 16340/18350/18650 3.7V Li-Ion's or 3.2V Lipo's. You can also use a 6-8V 2A wall adapter or bench power supply. Need a host/heatsink kit for this unit. Here are some of the more popular host/heatsink kits that will work with these diodes and if you want something that is not listed in those links that I show in my tutorials below shoot me a message and I can point you in the right direction for them. Host Kits/Heatsinks Here is what you get. The X-Drive is encased in the back of the model connected to the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. Wire assignment is: Red + Black- Wavelength 445nm +/ 5nm. Input Voltage 6V-8.4V. Driver Output Current 2100mA. Driver Current Draw 1.7A +/ 0.5A. Power Output 2.2W-2.7W. Driver Type Constant Current. Lens M9x0.5mm Threaded Three Element Glass Lens. Reverse Polarity Protection Yes. Duty Cycle 180 seconds on 30 seconds off with proper heatsinking. If this is your fist laser build here is a great place to start. The. I want to build a laser" Thread Here is one of my favorite hosts. The Sirius 1-C Here is a list of all the items that I carry. Here is a list of tutorials I have made and experiments that can help give you ideas for your next project. Check Out My Reviews& Build Tutorials* Shipping is Free in the US International First Class mail option"Not Tracked" Delivery estimate is 10-30 business days most falling around 15. or Express 5-7 day Tracked with Delivery
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: China
(4) Suitable for red laser module/red laser Torch/red laser Pointer/12x30mm host of Aixiz.
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Nichia NDG7475 1W 520nm Laser Diode. So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2. ... moreHere is what you get. One 9mm 1W 520nm diode mounted in a large 25mm x 30mm copper module with leads.
$
130.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Nichia NDG7475 1W 520nm Laser Diode. So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2. ... moreHere is what you get. One 9mm 1W 520nm diode mounted in a large 20mm x 30mm copper module with leads.
1
 In