|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Ellenwood, United States 1.Split type wear-resistant aluminum case design. 2.Built-in high-speed marking laser motion control system. 3.The fiber laser beam has good quality,high ... morereliability and high precision. 4. Fast marking on metals and certain non-metal materials(such as certain hard plastics). .
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States Built-in Autofocus. This laser engraving machine's workbeds adjust up and down at the touch of a button and the preinstalled autofocus will automatically ... morefind the right focal distance for you. Get Right to Work with Autofocus.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's laser engraver! I have been using the OMTech 20w fiber for a few months now and I have to say that is has been a great experience.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's laser engraver! I have been using the OMTech 20w fiber for a few months now and I have to say that is has been a great experience.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Carlstadt, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States Engravings on round objects are always demanding, but this Rotary Axis has the capabilities to help you get the job done right. 1 x Rotary Axis. Your ... morekind consideration is highly appreciated. We cannot take back used products.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR Industrial Water Chiller CW-3000 Upgraded 16 L/min CO2 Laser Tube Engraver. VEVOR Industrial Water Chiller Upgraded CW 5000 16 ... moreL/min for Laser Engraver CNC. VEVOR CW5200 Laser Industrial Water Chiller for CO2 Cutter Tube Laser Engravers.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States EzCad2 LightBurn Software FΘ Field Lenses Red Dot Guidance. A:The machine use the EZCAD2 software. JPT YDFLP-E2-100-M7-M-R 100W. JPT MOPA M7 100W Fiber ... moreLaser Machine x 1. JPT E2 M7 Laser Source Motorized Z Axis ZBTK Scanner ZB2D10.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States This OMTech red laser pointer can help you get the job done right easily and safely. Its clear design and detailed instructions guide easy setup and use. ... moreOnce you're done, just turn it off, replace your focal lens, and you're ready to get back to engraving!
Buy It Now
$450.00 Shipping Condition: New Location: United States 1. Please double check shipping address before placing order. If buyer put wrong address, buyer will take liability of send/return shipping cost. Please ... morenote. Thanks. 2. US buyer will be shipped from California warehouse, shipping time is 7-15 business days. Brand: HLJ LASER CUT Model: HL-1060D 100W Laser tube: RECI W2 Controller: RUIDA RDC6445 Effective working area: 960x600mm / 23.6"x37.8" Engraving speed: 0-500mm/s Cutting speed: 0-200mm/s Cutting depth: 0-10mm Working table: Honeycomb & blade Focal length: 63.5mm/2.5" Software: RDworks(compatible with lightburn) Operating system: Window 7/8/10 Extended Z travel: 0-200mm Auto focus/Red dot: Yes Ammeter: Yes Linear guide: X&Y axis Warranty: 1 year.
Buy It Now
Free Shipping Condition: New Location: China Laser power RAYCUS 100W. Frequency of pulse 20-200 KHz. Marking Speed 15000mm/s. 5 years warranty, 24 hours online technician support. Marking Content ... moreText, pattern, date, bar code, etc. Marking Depth 0.1-1 mm.
Buy It Now
Free Shipping Condition: New Location: Alloway, United States ENJOYWOOD M4 Laser Marking Machine. -Machine power: 100W. High power: 100W whole machine electrical power, the pulse peak optical power can reach 15000W. ... moreFine engraving: 0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States Bring power and precision to your creative work with High-Performance CO2 80W Laser Tube. ADVANCED TECHNOLOGY: The laser tube utilizes TEM00 mode for ... moreoutput, which promises high spot concentration, high energy density, and a stable spot, leading to superior machine performance.
Buy It Now
Free Shipping Condition: New Location: United States Laser tube type Reci 90W laser tube. We have catalyst plating in the inner wall of the laser tube. working life is up to 10000 hours. This new technology ... moremakes the high stability in W series laser tubes.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's laser engraver! I have been using the OMTech 20w fiber for a few months now and I have to say that is has been a great experience.
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport. 3-month warranty on laser tubes and ... morelaser power supplies 80W and up. This engraver includes 2 workbeds—one honeycomb and one aluminum blade—for handling projects large and small with maximal safety and efficiency.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective cover is opened and provides an installed air assist ... moreto blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: China Support Lightburn software! Laser power:RECI W2 (90-100W). Econocial Laser Engraving & Cutting Machine 700 500mm. Laser tube type: Co2 Glass sealed laser ... moretube. PC Interface: USB2.0 and USB Disk. Sketch map of Optical system, the laser beam is from laser tube, then reflecting mirrors and focus lens, As following.
Buy It Now
Free Shipping Condition: New Location: Chino, United States JPT M7 has a wide range of applications, can m arking on hard plastics, lea ther, color marking on stainless steel. 100W JPT MOPA fiber laser marking ... moremachine empowers you to bring your ideas to life with unparalleled speed, precision, and versatility.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States This OMTech red laser pointer can help you get the job done right easily and safely. Its clear design and detailed instructions guide easy setup and use. ... moreOnce you're done, just turn it off, replace your focal lens, and you're ready to get back to engraving!
Buy It Now
Free Shipping Condition: New Location: United States Reci 100W laser tube. - Working Table: Steel Honeycomb. Does it have Honey comb table?. Does it have Linear guides?. About Laser tube. you can ask a truck ... moreto help you. Does it have red dot position finder?.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's laser engraver! I've experienced a few problems; however, the OMTech team has been great at getting my issues resolved.
Buy It Now
Free Shipping Condition: Used Location: Ontario, United States CO2 Rotary Axis. custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ... moreideas into reality on a large scale. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States CO2 Laser Tube is the ultimate tool for precision cutting and engraving. This ensures exceptional accuracy and efficiency. Its versatile nature allows ... moreit to work with various materials such as acrylic, cloth, leather, bamboo, and wood.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this Preenex Rotary Axis has the capabilities to help you get the job done right. 1 x Rotary Axis. ... moreYour kind consideration is highly appreciated.
Buy It Now
Free Shipping Condition: New Location: Memphis, United States Red Dot Assist. Lifespan (hr.). Length( mm). EFR Series. Yongli H series. Yongli AS series. Marking Spray. Rotary Axis.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this OMTech Rotary Axis has the capabilities to help you get the job done right. 1 x Rotary Axis. ... moreNet Weight: 13.2 lb.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 100W JPT MOPA fiber laser marking machine empowers you to bring your ideas to life with unparalleled speed, precision, and versatility. Its adjustable ... morepulse frequency and width enable a wide range of colorful designs on stainless steel, along with high-contrast marking on anodized aluminum.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States NEW OFFICIAL MONPORT 130W CO2 Laser Engraver, (35" x 55") Laser Engraving Machine with Autofocus Butilt-in Air Assist Red Dot Pointer LightBurn Compatiable. ... moreIndustrial Laser Cutter Cutting Etching Machine for Wood Glass Acrylic and More.
Buy It Now
Free Shipping Condition: New Location: Anaheim, United States Rated Power: 100W. Replace your old tube with OMTech's heavy-duty H4 laser tube. Made of tough borosilicate glass, this durable 100W CO2 laser tube leaves ... morecompetitors behind. 1 x H4 100W Laser Tube.
Buy It Now
Free Shipping Condition: New Location: United States Manufacturer: Cloudray. Color: 100W. It even includes a convenient button to manually check the output laser, ensuring peace of mind and smooth operation. ... moreSize: 110V. MPN: MYJG-100W MONITOR 110V. Item model number: MYJG-100W MONITOR 110V.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this OMTech Rotary Axis has the capabilities to help you get the job done right. This compact rotary ... moreaxis can easily work with all 50 Watts and above OMTech CO2 Laser engravers to mark your curved surfaces.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Product Length: 49” (1450mm). Monport 100w CO2 Laser Tube for Laser Engraver. The 100W borosilicate glass CO2 laser tube, with an expected service life ... moreof 8,000 operation hours depending on the power setting.
Buy It Now
Free Shipping Condition: New Location: United States Why Choose VEVOR?. 100W CO2 Laser Engraving Machine. Adopts premium CO2 glass sealed laser tube with high power and fast speed. The machine is equipped ... morewith CO2 Infrared Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, etc.
Buy It Now
Free Shipping Condition: New Location: China Software: RDworks. Reci W2 (90-100W) CO2 Laser Tube with CE, FDA. Laser power:Reci W2 (90-100W). Warranty: 12 Months (3 months for Laser tube,mirrors ... moreand lens, 12months for Reci W2 tube). Econocial Laser Engraving & Cutting Machine 1000 600mm.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States NEW OFFICIAL MONPORT 130W CO2 Laser Engraver With CW-5200 Water Chiller, (35" x 55") Laser Engraving Machine with Autofocus, Butilt-in Air Assist, Red ... moreDot Pointer, LightBurn Compatiable. Industrial Laser Cutter Cutting Etching Machine for Wood Glass Acrylic and More.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Experience Monport's latest, independently developed autofocuslaser marking machine. Upgraded for enhanced performance and cost-effectiveness, users can ... moreenjoy advanced features without significant cost increase.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Protective Cover Fume Extraction Rotary Axis Metal Sheet Holder Lightburn Controller Galvo Head F-theta Lens Lifting Column Worktable 1.Split type wear-resistant ... morealuminum case design..
Buy It Now
Free Shipping Condition: New Location: Chino, United States This laser cutting and engraving machine Compatible with most third-party graphic software, this laser etching machine lets you upload your designs using ... morethe included software or via the Ethernet or USB ports.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Replace your old tube with our's heavy-duty 100W F4 laser tube. Made of tough borosilicate glass, this durable CO2 laser tube leaves competitors behind ... morewith its 8000-hour service life. (Its beam can function as high as 115W, but at the cost of a shorter expected life.).
Buy It Now
Free Shipping Condition: New Location: Fontana, United States NEW OFFICIAL MONPORT 130W CO2 Laser Engraver With CW-5200 Water Chiller, (35" x 55") Laser Engraving Machine with Autofocus, Butilt-in Air Assist, Red ... moreDot Pointer, LightBurn Compatiable. Industrial Laser Cutter Cutting Etching Machine for Wood Glass Acrylic and More.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Answer:The HL laser machine is CE&FDA certified. Hello, i would like to buy your co2 laser. Anything else do I need for HL CO2 laser machine?. Are HL ... moreCO2 laser machines safe to operate?. Answer:Sure, the HL CO2 laser machine is safe to operate through correct operation.It is with safety protection device.
Buy It Now
Free Shipping Condition: New Location: Buford, United States CALCA RECI 90W 20" x 28" CO2 laser engraver and Cutter, Electric Lift Bed, industrial water chiller, Compatible with LightBurn Software. The machine is ... morea laser engraver and cutter equipped with 90W CO2 Laser Tube.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Aligned Workstation--- 900x600 mm engraving area with integrated through entrances allows you to easily engrave longer objects. This device is compatible ... morewith Windows 2000, Windows XP, WIN7, WIN8, WIN10 and Vista.
$169.00 Shipping Condition: New Location: United States Simultaneously rotating axis suitable for all VEVOR engraving machines except 40W. Why Choose VEVOR?. CNC Rotational Rotary Axis. Accurate Chuck. Precision ... moreChuck. 80mm chuck with high precision provides better precise positioning and good concentricity, suitable for clamping various types of materials, high compatibility.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Bring your ideas to life with OMTech's laser engraver! Safe as can be, this laser engraver and cutter automatically cuts off the laser beam if the protective ... morecover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States 🔥【All-in-One Fiber Laser】 :Experience Monport's latest, independently developed autofocus laser marking machine. Upgraded for enhanced performance and ... morecost-effectiveness, users can enjoy advanced features without significant cost increase.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. The machine arrived in excellent condition. Bring your ... moreideas to life with OMTech's laser engraver! I've experienced a few problems; however, the OMTech team has been great at getting my issues resolved.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Bring your ideas to life with OMTech's laser engraver! Included CW-5000 Water Chiller. 1x CW-5000 Water Chiller. Safe as can be, this laser engraver and ... morecutter automatically cuts off the laser beam if the protective cover is opened and provides an installed air assist to blow debris clear of the laser as it is created.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Red Dot Assist. Lifespan (hr.). Length( mm). EFR Series. Yongli H series. Yongli AS series. OMTech+ Series. OMTech Series.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Monport 100w CO2 Laser Tube for Laser Engraver. The 100W borosilicate glass CO2 laser tube, with an expected service life of 8,000 operation hours depending ... moreon the power setting. 100W Laser Tube 1. Minimum Power 10–40% → laser tube lifespan 7,000–8,000 Hours.
|
|
|
|
LASER 100W Nd-YAG 1.06um TOSHIBA mod. UYM-D3000
LASER 100W Nd-YAG 1.06um TOSHIBA mod. UYM-D3000 REMOVED FROM WORKING EQUIPMENT- NO CONTROLLER- USED IN VERY GOOD CONDITION EXCEPT FOR SOME OXIDATION ON PUMP BULB HOLDERS(MUST BE CLEANED BEFORE USE) SEE PIC#9 HAS SIGHTING LASER BUT NO SUPPLY SEE PIC#2 UNIT HAS BEEN IN STORAGE FOR 4 YEARS AND HAS NOT BEEN TESTED SINCE THEN CAN ONLY SELL TO VERIFIABLE COMPANYS
|
|
|
8x Coherent Radiation 201 Laser Energy Power Watt Meter Sensor 300nm 30um 100W
Search our eBay Store! 8x Coherent Radiation 201 Laser Energy Power Watt Meter Sensor 300nm 30um 100W SKU: JV-NIO-B-L8C201 Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Lot of 8 Coherent Radiation 201 Laser Energy Power Watt Meter Sensor 300nm 30um 100W*FOR PARTS OR REPAIR* Model: 201. Physical Condition: Poor; Power cord has been cut. Display glass is broke. Major scuffs/scratches. It sounds like parts rattle around inside. We do not have the necessary resources to further test this unit. Dimensions(L" x W" x H" 11 1/8” x 5 1/2” x 6 3/8” BEING ... moreSOLD AS-IS FOR PARTS OR REPAIR. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have eno
|
|
|
IPG Photonics 100W Industrial LASER DLR-100 DLR-100-AT
You are bidding IPG Photonics 100W Industrial LASER DLR-100 DLR-100-AT. Unit not test, Sold"as is" Any question please contact: SquareTrade © AP6.0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f1038fbfe-0x108-
|
|
|
Rofin Sinar 100D Powerline D Diode Pumped Laser. Markers w/ 50W or 100W output
ROFIN SINAR 100D Powerline Diode Pumped Laser Markers with 50W or 100W output power. Diode pumped Nd: Yag Laser Marker Models: 100D. High productivity with high marking speed(1200 characters per second) Ease of integration in existing production equipment through a modular design and use of a specific OEM version. Low operating cost through highly efficient pumping process with laser diodes. User friendly operating software VisualLaserMarker under Windows NT. The Rofin-Group provides a worldwide service for maximum system availability through short intervention. SPECIFICATIONS: Laser head: Laser Medium Nd: Yag Wavelength 1064 nm/532 nm optional Pulse Frequency 0-65kHz(programmable) Nominal Power 100W Dimensions(LxWxH) 100 X 210 X 200 mm Weight 35 kg Safety Class IP 65 Marking Unit Marking Field Size 100 X 100 mm Focal Length 160 mm Dimensions(LxWxH) ... more175 X 118 X 166 mm Weight Approximately 2.7 kg Safety Class IP 65 Power Supply Cabinet: Dimensions(LxWxH) 600 X 800 X 978 mm Weight 170 kg Electrical mains 400V/230V(+/ 10% 50Hz, 3 P/N/PE Power Consumption Air-Cooled system: 3.8 kVA. Water-cooled system:400 V-3.4 kW Flow Rating Cooling Water 90-660 I/h FREE SHIPPING TO THE CONTINENTAL U.S. ON THIS WHEN PURCHASED AT LISTED PRICE. IF BEST OFFER IS ACCEPTED. CUSTOMER WILL BE RESPONSIBLE FOR ALL FREIGHT CHARGES. Looking for other Rofin parts not listed here? Please call 734-456-3100 Items shipped to the following states will be charged applicable sales tax: Arizona California Georgia Illinois Michigan Minnesota New Mexico New York Ohio South Carolina Texas Utah Washington Wisconsin
|
|
|
Coherent 201 Laser Power / Energy Meter 300nm-30um / 1W-100W / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Coherent 201 Laser Power/ Energy Meter 300nm-30um/ 1W-100W/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Coherent 201 Laser Power/ Energy Meter 300nm-30um/ 1W-100W/ Warranty Used Condition Coherent Laser Power/ Energy Meter Model: 201 Serial No. 2476 Range: 300nm-30um Wavelength Power Range: 1. 3, 10, 30& 100 Watt With Stand/ BNC Connector Cable/ AC Power Cord INV# 20C71349-12-12 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary ... morefrom the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is
|
|
|
Met 1 Laser Particle Counter LB-100W
Don't like our price? Make us an offer! Item Description: Met 1 Laser Particle Counter LB-100W. Includes everything pictured. About Free Shipping: Free shipping is only for domestic shipping to the lower 48 states to a physical(ie. non PO Box) address deliverable by Fedex/ UPS ground. If you only have a PO Box or live in Alaska. Hawaii, or other, please contact us regarding the difference in the shipping cost. Please let us know if you have any questions. About our Feedback: Please do leave us good feedback on all our categories. Unfortunately. Ebay has made it more difficult for smaller sellers and so anything less than perfect actually counts against a seller. Please let us know if there is anything we can do to accomodate so you can provide us with top ratings on all our categories! If there are any problems or questions, please do ... morenot hesitate to ask! Powered by
|
|
|
Synrad Evolution 100 (100W) CO2 laser system + RF 3000 supply + 3600W DC supply
You are bidding on a Synrad Evolution 100(100W) CO2 laser system which includes the following: Synrad Evolution 100 laser tube. Synrad RF 3000 RF power supply. Set of coaxial cables to provide RF power to laser tube. Phase One 3600W DC power supply(230V AC 3phase in. 30V 120A out) Set of power cables(AC in to Phase One. DC out) What you will need to get this running(not included in auction) Chiller to pump coolant through laser tube and RF supply. Coolant lines. Both laser and RF supply have terminals for plastic tubing, but you will have to provide the tubing. Signal generator for control signal into RF supply. You should be able to use a standard bench-top signal generator for this. This unit has been used to engrave approximately 3000 metal pieces since it was bought new and was decommissioned in favor of a smaller unit in 2011. I have ... moredocumentation that the last routine service was performed 12/2011 and then the unit was put in storage. I do not have a way to verify that the unit is operational since I do not have a chiller available. However, all indications point that everything is working. If you are within a reasonable distance of the San Francisco Bay Area(California, USA) and have the necessary equipment to fire this up(chiller + 3phase power) I would be happy to bring this by to test out. Otherwise, I am selling the unit AS-IS(last known to be working) and will not accept any returns. Please feel free to contact with any questions, happy bidding! Fine print: No returns accepted. Payment must be made within four days of auction completion unless otherwise agreed upon. Can deliver within 100 miles of SF Bay area for free. Also local pickup is fine(free) Shipping is $200 for everything to the continental United States via FedEx ground. International/AK/HI bidders, please contact for shipping quite before bidding. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f6dd0dee7-0xf2-
|
|
|
SYNRAD FIRESTAR T100,100W,fst100swb,CO2 LASER SOURCE MARKING, /w RF GENERATOR
F100 Outline& Mounting Drawings fseries Operation Manual Download f-series Brochure Download f-series data sheets Search by Power Level 10-40 watts 50-125 watts 200-240 watts 400 watts Search by Product Line 48-Series(10-50 watts) Evolution(100-240 watts) firestar(20-400 watts) Take the guess-work out of your next laser project. Try our web-based laser processing calculator! See Synrad lasers in action! The firestar f100 features: 100 watt CO2 laser Excellent Beam Quality Integrated RF Water Cooled Small Footprint. Compact Design Ruggedized. 3-point Mounting System The firestar f100 is constructed around the basic building block of all f-series lasers. Synrad’s patented, compact free-space resonator tube. Together with the f-series’ innovative integrated on-board RF drive system. The f100 represents the industry’s smallest fully RF integrated ... more100 watt laser solution. The firestar f100’s patented tube design creates a laser that is only 25.1inches in length and operates from a single low-cost 96 VDC power supply. In applications such as production line high-speed parts marking where space constraints can be a key project requirement. The f100 is a perfect fit. firestar f-series 100 Watt Specifications: Output Power 100W Mode Quality M²<1.2 ± 0.1 Ellipticity <1.2 Rise Time <150µsec Beam Diameter 3.5mm Beam Divergence(full angle) 4.0mR Wavelength 10.2-10.7µm Power Stability: cold start(guaranteed) after 2 minutes(typical) ±10% ±6% Polarization Linear(Horizontal) Cooling Water Heat Load(max) 2000W Flow Rate(18-22°C) 2.0 GPM. <60PSI Input Voltage/ Current 96 VDC/ 18A Dimensions. Laser head(in) 25.1 x 6.3 x 5.6(mm) 638 x 160 x 142 Weight 38 lbs/ 17.2 kg removd from working condition. 14 days money back. On Jun-30-11 at 07:09:16 PDT. Seller added the following information:
|
|
|
rofin sinar oem10ix 10.6LP 100W CO2 Laser
rofin sinar oem10ix 10.6LP 100W CO2 Laser with RSDC1096 Laser Power Supply TESTED WORKING CONDITION Information Condittion used a+++++++++. This unit is fully tested prior to shipping Shipment We will ship your order within 2-3 business days via post airmail. It will usually take 10-14 business days after shipment. Return Policy We carefully inspect the item before shipment. In case you found a defect on the purchase. We will exchange or refund it Contact Us We are willing to respond to your inquiry If you have a question or problem.Please contact us first. It is the fastest way to settle your concern or issue.
|
|
|
Coherent DIAMOND GEM-100L Laser & D1000 RF Power Supply - 100W CO2 10.6 um Laser
This auction is for a Coherent GEM-100L laser head and Coherent D1000 RF Power Supply. Both units are used and are in normal working order. Laser and RF were tested to have an average output of 103 watts. The manufacture date of the laser is 9/26/05 and for the RF is 4/23/04. The RF power supply has a 230V AC input as the DC Power supply is built in to the RF Unit. Feel free to email with any questions you may have. The laser and RF have been fully inspected and tested using a calibrated power meter. If unit is defective on arrival I will issue a replacement or a refund.
|
|
|
Lee Laser 8100M 100W CW
Lee Laser 8100M 100W CW Used as shown in the photographs. This laser requires 3 Phase 240V power which we do not have at our current location so we are unable to test the laser. The sticker on the side of the laser head reads 100W. It is complete with power supply as shown and cooling system as shown. Also has a Crystal Technology AOQ Switch Driver. Again. We have not tested this laser. It is being sold as-is, as pictured. All pictures contained in this auction are of the actual item up for auction. Click on the pictures to enlarge them to full size. Contact information: Our contact information will be provided to the high bidder upon auction completion including our address and phone number. If you are having email problems. It is possible that our email is being stopped by your spam filter. Make sure you check your ebay registered email. ... moreOur software, Ebay's Blackthorne Pro uses your ebay registered email address for communication not Ebay messaging. If you cannot locate the email from us, use ebays"Find Contact Information" on the Advanced Search page to get our phone number so you can call us to let us know you are having a problem receiving email. We are available Monday, Wednesday and Friday for phone calls. This is an internet based business, so the majority of our communication will be done through email and ebay messaging. Payment: We accept payment through PayPal from US and Canadian account holders with a confirmed PayPal address. We do not accept international PayPal so do not ask and do not assume that we will. Again PayPal payments must have a confirmed address. We will only ship to your confirmed PayPal address. Again. We do not accept international PayPal All California residents will be charged 8.75% sales tax. Payment must be received within 7 days of the time you receive you total including shipping. Shipping: We ship within the United States and Canada only. We do not ship to PO boxes including APO/FPO. Upon request. And with the understanding that we do not take international Pa
|
|
|
Optical Eng. Macken Instruments P-10K YAG / CO2 Laser Power Meter Probe 100w
HELLO. UP FOR AUCTION IS FOR 1 P-10K Laser Power Measurement Probe: This sale is for one: P-10K Laser Power Measurement Probe. This product is manufactured by Macken Instruments for Optical Engineering and Directed Light. Measures laser power for YAG(900-1250 nm) and CO2(8-11 microns) Laser measurement range from 0 to 10000 watts. This probe is tested and fully operational. Laser power measurements are quick and easy with the P-10K. Position the power meter in front of the laser beam(as shown in the photo) and 20 seconds later read the power measurement. It does not involve a time consuming setup and alignment like other power meters. Unfortunately, most laser power meters have sacrificed ease of use to gain continuous power readings. However, in most laboratory and production situations, the usual requirement is for a quick spot-check of ... morepower with a minimum of disruption. This power probe is a calorimeter type power meter which measures laser power using a timed exposure. It will display the average power absorbed on the calibrated readout scale and can be used with continuous or repetitively pulsed lasers. Key Features of this probe are: The absorbing probe head is conveniently sized. The head is large enough to be easily used, yet small enough to be inserted between optical components to measure the laser power without disturbing set-up. The hand-held meter requires only about one minute to make a laser power measurement The absorbent coating is very tough, resisting mechanical abrasion and water immersion A zero adjustment mechanism has been incorporated into the design to expedite and simplify the power measurement process An accurate and durable all metal construction has been used to ensure a long life Taking Measurements The P-10K power probe is a self-contained unit consisting of an absorbing head, a temperature measuring mechanism, a zeroing knob and a readout dial. In operation, the dial is zeroed. Then, the absorbing head on the end of the power probe is exposed to the laser beam for 20 seconds.
|
|
|
US Laser Corp 403L 403C FOBD 100W Yag Laser Fiber Optic Beam Delivery 13 Hours
For sale is a used US Laser Corp. 403L FOBD s/n 21223 100 Watt 1064nm Nd: Yag Laser. New 5/2001 The laser only has 13 hours on it. The laser head is p/n 3731 s/n 36902 The laser has fiber optic beam delivery option. Comes with the owners manual. It has a computer monitor and a computer included as shown in the photos. The computer has a built in monitor. We are not sure if they belong with the system or not. They were in the crate. You also get the other piece that reads: Output coll. 60mm p/n 3303-7 That's all we know. Purchased at a surplus auction. It was put in to storage and that is all we know. We will secure the system in the crate shown. Buyer pays for shipping. Thank you for looking
|
|
|
CO2 ND:YAG Laser Beam Block Shutter Mirror 100W+ Beam Combiner system
Please read carefully before bidding You are bidding on: Laser Failsafe Beam block shutter + Beam combiner The shutter can handle with 100W+ laser(estimation) see pictures) Subscribe to our mailing list My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! Please noted we are working 6 days a weak between: 5:00AM(GMT) 14:30(GMT) Sunday throw Friday. PAYMENT ... morePayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price dose not includes V.A.T. Please contact us for shipping and v.a.t. SHIPPING Shipping options: Registered. EMS, UPS, FedEx Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive your item within 26 business days after making the payment please contact us immed
|
|
|
IPG POHOTONICS 100W CW SINGLE MODE FIBER LASER YLM-100 INDUSTRIAL CUTTING LASER
IPG POHOTONICS 100W CW SINGLE MODE FIBER LASER YLM-100 INDUSTRIAL CUTTING LASER. Beam Expander and Isolator. USED. Working Conditions.
|
|
|
IPG PHOTONICS 100W CW SINGLE MODE FIBER LASER YLM-100 INDUSTRIAL CUTTING LASER
IPG PHOTONICS 100W CW SINGLE MODE FIBER LASER YLM-100 INDUSTRIAL CUTTING LASER. Beam Expander and Isolator. USED. Working Conditions. Posted with
|
|
|
100w IPG Photonics diode pumped fiber laser 110v TEM00 M^2 1.05 air cooled
Free domestic shipping. I WILL sell this unit internationally but will ship at cost. I have priced this unit low for a quick sale. Payment by bank wire only at this price. Warning: The small size. Light weight, air cooling and 110v operation of this unit might seem deceptive. This is a serious laser and can be very dangerous if mistreated. All kidding aside, this is the closest thing to a laser-death ray most will ever have the opportunity to use. This will make concrete glow cherry red 100 ft away. This will light the drapes on fire of the house across the street, and instantly blind someone at even greater distances. Unless this is built into a class 1 enclosure, ALWAYS use safety goggles with this unit. The potential performance of this laser will nothing short of astound anyone who is in the laser engraving business. Run your process ... moreat 10x the speed OR move into new territory such as rapid. Deep marks on brick and other stone, or highly reflective metals such as gold silver and copper. Instead of just marking metal business cards you can cut them out of sheet stock. Cut out metal pop-ups. Build a 3D printer that crafts solid objects from metals, instead of thermoplasitc. Most engravers in the field today will put out 5 to maybe 10w of TEM00 power. A high power diode pumped machine might do 20w. This laser does 100- yes thats not a typo- one hundred watts TEM00 with an M^2 of This laser can be run either with the front panel. Via RS232, or with more conventional analog inputs with 0-10v for power and ttl input to control blanking. Since this is a MOPA there is no issue with first pulse suppression. Plug and play with your existing machine, just shine the output end of the fiber at your upcollimating telescope or galvo assembly, wire the controls and go! The first photo is of the actual laser. The remaining photos are of the type of work that can be done with this laser. The OEMs website is: Application note that shows actual welds and cutting of thin metals in a production environment using a similar powe
|
|
|
Coherent 100W GREEN DPSS YAG Laser Rod End Pump Optic Lens HR Assembly
This is a rare find! It is a 20mm diameter DPSS end pumping assembly for 20 to 100W+ green DPSS lasers. The design of this optic allows the user to end pump most Yag or YVO4 laser crystals up to 1.5cm long and 1/4 inch diameter effectively. The 1064 side faces the rod. And the 808nm side faces the roughly collimated pump diode beam. It can take several hundreds of watts at 808nm and over 200W of IR 1064nm power as well. Your choice of lasing crystal is the only realistic limiting factor. It is made out of a special mirror that is HR 1064nm, and AR 808nm and a BBIR intracavity lens. Due to the design, it is quite tolerant of small misalignments making it ideal for portable high energy laser applications requiring ultra high power. To say this part is hard to find is a gross understatement. I have lots of lasers and other unique stuff for sale ... morethis week.
|
|
|
nLIGHT Pearl™ P14 series 100w diode Fiber LD LASER
nLIGHT Pearl™ P14 series 100w diode Fiber LD LASER Plastic Welding Soldering ACF Bonding PV Annealing FPD Annealing Marking Wavelength: 900-990 nm CW output power: 105w Fiber core diameter: 200um Power conversion efficiency(typical) 47% Operating current(typical) 9.2A Operating voltage(typical) 23.8V Storage temperature range2: 40 to +80°C Operating temperature2: +15 to +35°C NEW OTHER/ TEST ONLY Information Condittion used a+++++++++. This unit is fully tested prior to shipping Shipment We will ship your order within 2-3 business days via post airmail. It will usually take 10-14 business days after shipment. Return Policy We carefully inspect the item before shipment. In case you found a defect on the purchase. We will exchange or refund it Contact Us We are willing to respond to your inquiry If you have a question ... moreor problem.Please contact us first. It is the fastest way to settle your concern or issue.
|
|
|
Laser Etcher Miyachi Technos Corp 100W
Miyachi Technos Corp 100W Class IV Laser Product. Taken out of production in 2011. Comes with Laser Head. Chiller, PC, and supporting documents and hardware. Also comes with all cables and connectors for connecting to I/O card such as Programmable Logic Controller(PLC) or other similar controller. Was in perfect working condition when removed from production. Ran for 5 years etching metal parts.
|
|
|
Universal Laser Systems Cutter and Engraver ULS X100 100W 32" x 18" bed
This is a 100 watt ULS laser cutter and engraver with a 32" x 18" cutting bed that allows for parts up to 9" tall. It has a 100 watt Coherent laser tube with less than 100 hours on it since being professionally recharged. It has air and gas assist. A downdraft vector cutting table(which I built) and a brand new full size honeycomb for the table from the manufacturer to replace the used partial honeycomb pictured. Here's a video of the laser in use: The laser runs directly from desktop graphics programs like Corel Draw and Adobe Illustrator. It can cut and engrave all kinds of materials. The high power is particularly nice for cutting materials 1/4" or thicker, and the large bed is nice for large pieces or to reduce the number of times you have to switch out materials for large batches. Here's a link to the manual: ... moreI can also email the software driver for the laser. All ULS lasers are made and supported in the US. Which is really handy. Everything needed to run the laser is included as seen in the images. That includes a 1 hp. Low noise air compressor for gas assist; a compressed air dryer to protect the optics; a water cooler to keep the laser tube cool during operation; and an exhaust fan. A new setup like this is about $40.000 and this laser has been well taken care of. Please let me know if you have any questions.
|
|
|
C110505 Lee Laser LHH-30P Flash Lamp Brick Gas Laser Head (100W @ 1064nm)
Click to Enlarge) Product ID# C110505 This Lee Laser LHH-30P Flash Lamp Brick Gas Laser Head looks to be in good cosmetic condition. Showing some signs of wear. However, I have no way of powering it up or testing it, and it is being sold as-is. It has a danger sticker on it, which reads: 1.06 Microns 100W Max/ 0.632 Microns 5mW Max, and another sticker which reads: 100W Max@ 1064nm. Approximate overall unpacked dimensions: 22"L x 18"W x 10"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 47 dollars(for DOMESTIC shipments only- 48 contiguous states excluding ... moreHawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 28 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California and Texas Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County, the current basic state tax rate applie
|
|
|
US Laser Corp Manual Zoom Upcollimator from 1064nm 100W Lee Laser System
Make US Laser Corp, Design Wavelength 1064nm, Here is what appears to be a US laser upcollimator. These were in a box of spare parts for a 100W/ 1064 nm Lee Laser system. Most all the mounts were labeled as US Laser components. This one doesn't appear to have any labels or part numbers so we do not have exact specs on it. Location; C 1408 14-5ListC Shipping Costs We do not look to make money on shipping charges. We only try to cover actual postage and shipping costs. If you feel a shipping quote is too high. Please contact us as we may very well be able to do better. The Ebay calculator is simply one estimate and can be off at times. Turnaround Time About 95% of our orders ship within one business day and if you let us know that there is rush. We can almost always ship the same day. Freight items usually have a 2 day turn around time. ... moreNext Day Shipping We can offer next day shipping on just about all our products even if its not shown as an option on the shipping calculator. Please contact us for next day shipping options. We usually can get products out the same day even if paid for as late as 5:00 PM MST. Will You Reduce an Items Value on the Commerical Invoice to Reduce Customs Fees No. Unfortunately, we cannot reduce an items value on an invoice or shipping document. We understand paying customs fees is no fun(we have to pay them often as well) but lying about customs fees is against federal law and Ebay policy and the fines are severe. Can You Ship on My Account/Local Pickup Yes. We can ship on a customer's UPS and FedEx account. Local pickups are also accepted weekdays from 10-5 PM and by appointment. Packaging We take packaging very seriously and use only the best void fill and cushioning products. We have a foam in place system. Full crating department, and hundreds of in stock box sizes. We feel the added cost of the best shipping materials is worth it to make sure your products arrive safe. Freight/Items near/over 150 lbs/ Very Large Items Many of our products are too large to ship through small
|
|
|
Synrad 57-1 CO2 Laser Tube 100W Epilog Express Replacement
Synrad 57-1 CO2 Laser Tube 100W Epilog Express Replacement Used- Output 70+ watts BUY IT NOW $30 has been added to shipping calculator to cover insurance charge Working Synrad laser tube. Currently tested at 70+ watts. Will require gas filled to output 100 watts. I can send you a contact that can do this for approximately $1500. Buyer will require additional equipment to operate laser. Including but not limited to; RF supply, power supply cables, controller. Buyer accepts all responsibility connecting and operating this laser tube. This is not a toy. C02 laser can be dangerous without proper knowledge and protection. Includes: item as pictured. Check out our other items! Combined shipping available. SHIPPING: We only ship to confirmed Paypal address or local pickup is available. We attempt to ship within 24 hours after payment received on ... morebusiness days. Our goal is to ship as soon as possible. We ship by USPS or UPS regularly. If buyer desires alternative shipping we will work with the buyers agent but additional costs are the responsibility of the buyer. For large items check out Uship. We use it regularly. Items will be shipped in the retail packaging. If not available generic packaging will be used. Large overweight items will be disassembled or pallet for shipping. $30 additional charge for Pallet) Notice: I nternational will require additional air shipment charge. Please contact us for a quote. We only ship to the confirmed address provided by PayPal. Before you pay. Please make sure your address in PayPal matches the address you would like us to ship to. We can't ship to POBOX.APO address, thanks for your understanding. International Information: We strive our best to provide you the most reliable. Affordable way of shipping service. But sometimes international delivery is highly dependent on the courier company and local customs/duties. If you do not receive your item on time, please contact us immediately for further assistance. Import duties. Taxes and charges are not included in the item price or sh
|
|
|
Coherent DIAMOND GEM-100L 100W CO2 laser Excellent Condition
Coherent DIAMOND GEM-100L 100W CO2 laser With D1000L Laser RF Power Supply. With 48V DC Power Supply TESTED WORKING CONDITION Condition: used a+++++++++. This unit is fully tested prior to shipping
|
|
|
General Photonics TWO-10, 1064nm 100W CW Nd-YAG Water cooled laser for repair
General Photonics TWO-10. 1064nm 100W CW Nd-YAG Water cooled laser for parts or repair, or it may even work for all I know) It is rated at 100W continuous duty. This has been sitting around the shop for a while, I always meant to try to fire it up, but never got around to it. The label on the laser head says S/N 314, Mfg. Date: July 1981. The 9-pin connector is chipped, but looks alright. I just opened it and there is good news! There is no sign(or smell) of overheating. I see that someone bypassed the internal microswitch and wired the 120V directly to the flash lamp, so perhaps the microswitch failed or they didn’t have the mating connector to the DIN plug. The heat exchanger/pump unit is included in the sale. But, this system has not been tested so is sold for parts or repair only. Please Note: All items to be shipped outside the USA will ... morebe exported via eBay’s Global Shipping Program only. Please bid freely if you live in the USA or in a country served by eBay's Global Shipping Program! Returns accepted only in cases of misdescription. We try very hard to correctly describe items. If you feel an item has been misdescribed, please contact us. Thanks for bidding! Handling charge includes full insurance. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14ac6e8df5c-0x104-
|
|
|
TOSHIBA MN: UYH-C8500 100W ND-YAG 1.06UM LASER
Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. TOSHIBA MN: UYH-C8500 100W ND-YAG 1.06UM LASER*DOLLY NOT INCLUDED* Condition: USED& UNTESTED. DOLLY NOT INCLUDED* Estimated Packed Shipping Weight: 150.00 lbs. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: JN Can't ... morefind the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-6712, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical
|
|
|
SLT/Registrant CLMD 220 YAG 220-100W Medical Surgical Laboratory Laser System
Search our eBay Store! SLT/Registrant CLMD 220 YAG 220-100W Medical Surgical Laboratory Laser System SKU: JV-LEV-C-CLMD220SLT Condition: Used Packaging: Pallet/Skid Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge SLT/Registrant CLMD 220 YAG 220-100W Medical Surgical Laboratory Laser System Model: CLMD 220 Manufacturer's specifications: Input Voltage: 220 Input Current: 25 We were unable to test this unit at the time Unit uses a NEMA L6-30 industrial plug Unit has visible scratches. Scuff marks, sticker marks, and paint wear Unit's control panel is intact. But also has scratches and visible marks Unit Dimensions(L" ... morex W" x H" 23 1/2 x 17 4/5 x 36 1/2 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FD
|
|
|
Yaskawa Servo Drive & Motor SGDH-01AE SGMAH-01AAA21 100W cnc router laser
Yaskawa Servo Drive& Motor Servo Drive: SGDH-01AE Servo Motor: SGMAH-01AAA21 Used item in working conditon. Photos show the actual item you'll receive.Thanks! i000000. Thank you for visiting
|
|
|
High-power CNC laser light source MODEL 010389 100w
buyer paid the shipping fee. what you are bidding or buying ONLY 1 psc USED( High-power CNC laser light source MODEL 010389 100W) Payment: We accept PayPal or Bank transfer or WU Payment must be made within 5 days after the end of auction. Unpaid dispute will be filed to eBay for any non payable bidders. Shipping: We only ship to your confirmed Paypal address. Please make sure your Paypal shipping address is correct before purchase. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. All items shipped with careful packaging to protect and ensure saftey of contents during shipment. Most orders will be shipped out within 1-2 business ... moredays upon payment confirmation. Shipping time: 7-18 days United States.United Kingdom, Australia, Canada, Singapore, New Zealand, Japan, South-Korea. 10-30 days France.Germany,Switzerland,Sweden,Denmark,Belgium,Ireland Terms of Sale: All our items come with one 14 days warranty. Please feel free to contact us if you are not satisfied with the purchase. Contact Us: Negative feedback can not solve anything. If you have any problems. We are very glad to help you. Please allow us to reply your email within 24 hours. Please contact us through ebay message(welcome) or Emai Check out our eBay store for other similar items. amoj1010 Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14b405762a5-0x104-
|
|
|
Topcon LS-100W Mount Laser Receiver With RD-100W
the auction is for a Set of Topcon mount laser receiver models LS-B100W and RD-100W in good working conditions/ please check the pictures for more details. The items are used with many scratches, it include everything in the pictures. If you have any question please email us thanks WHAT YOU SEE IS WHAT YOU GET winner pays for shipping and handle FREE to the lower 48 states only. the item is going to be shipped with FedEx ground 4-5 business days depending on your area location or weather. we don't ship PO BOX at least that the item weight is 15lbs or less. trough POST OFFICE. OTHER places like ALASKA, HAWAII, CANADA, GERMANY,EUROPE, SPAIN, ITALY,UNITED KINDONG AND MORE. PLEASE CONTACT US BEFORE BIDDING for a shipping quote. OUR POLICES: ALL ITEM MUST BE RETURN IT WTHIN 4-5 days after received if there any dissatisfaction with it. please ... morecontact us before any negative feedback. so that we can resolve the issue. OUR GOAL IS TO HAVE A SATISFASE CUSTOMER AT ALL TIMES. THANK YOU AND HAPPY BIDDING. GOOD LUCK SE HABLA ESPAÑOL
|
|
|
ND YAG LASER Head 100W.
In working condition.
|
|
|
Laser Cutter/engraver GCC LaserPro 100W
Laser and Plasma Cutter 100+Watt. Cut Acrylic 1' thick, Metal and aluminium up to 1/4' High definition registration/alignment software, 1000 CFM fume extraction system with activated charcoal, perfect condition ready to work, paid over 70 000.00$
|
|
 |