In 
 
Order by: 
Available to: 
Price: 
 - 
$
162.40
Buy It Now
Free Shipping
Condition: New
Location: Greece
1 xLaser Module 36W. for Cutting / Engraving with TTL / PWM + Safety Goggles. New Upgraded Powerful Blue Laser Focusable M odule Head 36 WATT (Input Power). ... moreCan be use for CNC as well. Laser Wavelength: 450nm(Blue).
$
162.40
Buy It Now
Free Shipping
Condition: New
Location: Greece
1 xLaser Module 36W. for Cutting / Engraving with TTL / PWM + Safety Goggles. New Upgraded Powerful Blue Laser Focusable M odule Head 36 WATT (Input Power). ... moreCan be use for CNC as well. Laser Wavelength: 450nm(Blue).
$
245.20
Buy It Now
Free Shipping
Condition: New
Location: Greece
Laser Wavelength: 520nm(Green). Focusable 1,2 WATT (1200mW) Laser module for Cutting / Engraving. Focusable 1.2W Green Laser Module ✔✔. Power:1,2 Watt ... more(1200mW). Powerful Green Laser. with TTL / PWM + 12V Adapter + Safety Goggles by Zeus.
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: China
Decent 520nm Green Laser Beam. Built by Nichia 520nm 1.2W laser diode. Wavelength 520nm. Output Power 1000mW. Modulation Analogue /TTL Modulation. Industrial ... moreDesign with Analogue modulation. Power Stavility(20-30° C)
$
150.00
19h 5m 40s
0 bids
$199.99 Now
Free Shipping
Condition: New
Location: Lexington, United States
This laser is NOT a cheap 100-200mw Chinese model. THIS LASER IS THE CHEAPEST OF ITS TYPE. The laser’s host is made of excellent black anodized aluminum.
$
45.00
6d 13h 28m 58s
0 bids
$10.00 Shipping
Condition: For parts or not working
Location: Colorado Springs, United States
I don't have the power plug for it any more, or the software to run it. The laser cutter itself is in great condition and if you can find a power adaptor ... morethat works for it, it will make a great project piece.
$
45.06
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Focusable 2 Watt 450nm Blue Laser Module 2000mW+TTL Driver Board 12V Engraving Specifications: Wavelength:445nm~450nm Output Power:2000mW Adjust the focus:Yes(By ... morefingers),2A; TTL:Yes,White cable at + and Blue cable at -; TTL signal input 0~5V input.(0V OFF/5V ON)(TTL Modulation control the output beam OFF / ON ) Outer driver board:working more steady than inner driver board; Frequency for TTL control:0-20KHz; Duty cycle:input 1%-100%; Red cable at "+",Black cable at "-"; Package: 1 X 450nm 2000mW laser module with TTL Driver board USE: * It can adjust the focus(By Fingers),smallest dot
$
48.47
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: Wavelength:445nm~450nm Output Power:2000mW Adjust the focus:Yes(By fingers),2A; TTL:Yes,White cable at + and Blue cable at -; TTL signal ... moreinput 0~5V input.(0V OFF/5V ON)(TTL Modulation control the output beam OFF / ON ) Outer driver board:working more steady than inner driver board; Frequency for TTL control:0-20KHz; Duty cycle:input 1%-100%; Red cable at "+",Black cable at "-"; Package: 1 X 450nm 2000mW laser module with TTL Driver board.
$
154.20
Buy It Now
Free Shipping
Condition: New
Location: Greece
Focusable 15 WATT (15000mW) Laser module head for Cutting / Engraving. Power:15 Watt (15000mW). Focusable 15W Laser Module ✔✔. Can be use for CNC as well. ... morePowerful Blue Laser. The most laser modules in the market have fixed focus.
$
169.95
Buy It Now
Free Shipping
Condition: New
Location: Southwick, United States
Because the NDG7475 laser diode is a multi-mode diode you will always get a rectangle as opposed to a dot. This is a characteristic of all multi-mode ... morelaser diodes. You want to focus it so you have the cleanest and thinnest line possible.
$
180.00
Buy It Now
Free Shipping
Condition: New
Location: China
(1) Wavelength: 520nm. 2) Output Power: 1000mW. 9) Lens: Glass.
$
174.50
Buy It Now
Free Shipping
Condition: New
Location: Greece
Laser Wavelength: 450nm(Blue). Cooling mode: Heatsink and Fan. Focusable 15 WATT (15000mW) Laser module diode for Cutting / Engraving. Can be use for ... moreCNC as well. Powerful Blue Laser. 1 xLaser Module.
$
196.00
Buy It Now
$3.87 Shipping
Condition: Seller refurbished
Location: Clarksville, United States
Applying full power (3A) to this array with reverse polarity will permanently burn out at least an entire row of diodes. Excessive heat will also shorten ... morethe life of it substantially. If you don't plan on using active cooling, I would highly suggest you mount a 70°c normally closed plastic KSD9700 temperature switch to the side of the array and wire it to cut power to the array when it gets too hot.
$
148.00
Buy It Now
Free Shipping
Condition: New
Location: China
(Wavelength : 520nm(120mW)+638nm(300mW)+445nm(600mW). Combined Optical Power outut: 1000mW. 1 pcs RGB Laser Module. Module Size:63*50*40mm. Beam Characteristics ... more:(Near to TEM)) model, Divergence85%.
$
47.50
Buy It Now
$6.15 Shipping
Condition: New – Open box
Location: Alviso, United States
This batch is a little too high wavelength to be temperature tuned to 808nm. Test report included with each module. Manufacturer: JDSU / SDL. Photodiode ... moreSensitivity: 0.1 - 10.0 uA/mW. Thermistor type: 10K NTC.
$
11.90
Buy It Now
Free Shipping
Condition: New
Location: China
CO2 Si mirror By Cloudray Laser Features and specifications: Mateial: Gold-coated Si Wavelength: 10.6 μm Diameter Tolerance: +0/-0.13 mm Thickness Tolerance: ... more±0.25 mm FL Tolerance: 90% Surface Figure:
$
49.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Wauchula, United States
Must use a constant current laser driver to power this diode. Driver should be tested under load with a device of similarly low impedence, before connecting ... morethis or any laser diode. NUBM47-A1 445NM, 7+Watts, 1x single 9mm diode.
$
44.95
Buy It Now
Free Shipping
Condition: New
Location: Southwick, United States
A constant current driver must be used to power the diode.
$
139.99
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 980nm. Working Mode: TTL >20KHz. 3, Good cooling, with TTL. Diode is high quality. 4, The output beam is IR beam. Laser Shape:Dot(Rectangular ... moreto oval). Module Size: 33mmx33mmx80mm. But you can buy high quality products and satisfied products.
$
131.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Nichia NDG7475 1W 520nm Laser Diode. So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2. ... moreHere is what you get. I expected this thing to dim maybe around 2.5A but it just kept going.
$
577.50
Buy It Now
$15.92 Shipping
Condition: For parts or not working
Location: Alviso, United States
Water cooled, 650 watt CW, 801nm laser diode stack with FAC lenses. These modules contain a vertical stack of 7 100W water cooled 1cm wide bars, each ... morewith a fast axis correction (FAC) lens. The lenses collimate the fast axis so the output from the array is 7 stripes in a 10mm x 13mm area.
$
497.50
Buy It Now
$15.92 Shipping
Condition: For parts or not working
Location: Alviso, United States
Water cooled, 650 watt CW, 801nm laser diode stack. These modules contain a vertical stack of 7 100W water cooled 1cm wide bars. These modules require ... morecooling water and will be. Wavelength: 801nm +/- 3nm.
$
1577.50
Buy It Now
$31.94 Shipping
Condition: New – Open box
Location: Alviso, United States
NEW water cooled, 650 watt CW, 801nm laser diode stack with FAC lenses. These modules contain a vertical stack of 7 100W water cooled 1cm wide bars, each ... morewith a fast axis correction (FAC) lens. The lenses collimate the fast axis so the output from the array is 7 stripes in a 10mm x 13mm area.
$
48.45
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: Wavelength:445nm~450nm Output Power:2000mW Adjust the focus:Yes(By fingers),2A; TTL:Yes,White cable at + and Blue cable at -; TTL signal ... moreinput 0~5V input.(0V OFF/5V ON)(TTL Modulation control the output beam OFF / ON ) Outer driver board:working more steady than inner driver board; Frequency for TTL control:0-20KHz; Duty cycle:input 1%-100%; Red cable at "+",Black cable at "-"; Package: 1 X 450nm 2000mW laser module with TTL Driver board.
$
50.00
Buy It Now
Free Shipping
Condition: New
Location: China
FOCUSABLE 1000mW~1200mW 450nm 445nmBlue Laser Module Outer driver CNC Cutter Engraving/TTL. 2,Output Power:1000mW~1200mW ( without focusable ). 1,Wavelength:445nm~450nm. ... more4,TTL:Yes,0V OFF,5V ON; ( TTL Modulation: Make sure input TTL level PWM dightal signal ).
$
355.00
Buy It Now
$5.72 Shipping
Condition: New – Open box
Location: Clarksville, United States
Excessive heat will also shorten the life of it substantially. If you don't plan on using active cooling, I would highly suggest you attach a plastic ... more70°c normally closed KSD9700 temperature switch to the side of the block and wire it to cut power to the bank when it gets too hot.
$
48.45
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: Wavelength:445nm~450nm Output Power:2000mW Adjust the focus:Yes(By fingers),2A; TTL:Yes,White cable at + and Blue cable at -; TTL signal ... moreinput 0~5V input.(0V OFF/5V ON)(TTL Modulation control Outer driver board:working more steady than inner driver board; Frequency for TTL control:0-20KHz; Duty cycle:input 1%-100%; Red cable at "+",Black cable at "-"; Package: 1 X 450nm 2000mW laser module with TTL Driver board.
$
100.69
Buy It Now
Free Shipping
Condition: New
Location: China
• Wavelength: 450nm. 1 x Powerful Laser Flashlight. This laser pointer can be used for presentation, teaching indicator and more. • Beam style: continuous ... moreline. Use your laser pointer to point at any desired targets on projection screen, video.
$
165.35
Buy It Now
$10.00 Shipping
Condition: New
Location: China
1pc Focusable 800mW 980nm Infrared IR Laser Diode Module 12V w/TTL & Driver Out. Wavelength 980nm. LD 980nm 1W. Output Power 800mw 0.8W. Focusable YES. ... moreThis is a focusable laser module. Red wire connects”+” pole; Black wire connects ”-” pole.
$
186.97
Buy It Now
$4.00 Shipping
Condition: New
Location: China
High Power 515nm 520nm 1w 1000mw Green Laser Dot Module Fan DC12V 40x40mm. Output wavelength: 515nm. 1pc 515nm 100mw Laser Module. Output power: 1000mW. ... moreLight shape: Dot. Beam style: Continuous line. We will send the item to you as soon as you won and paid.
$
119.99
Buy It Now
Free Shipping
Condition: New
Location: China
2 Output Power: 1000mW+. TTL function depends on your engraving machine signal. 5 TTL signal input: 0V ON/5V OFF. Can work with PWM and Gift PMW Regulator ... moreand Google. 9 Lens: Glass Optic. 1 Wavelength: 520nm-525nm.
$
100.50
Buy It Now
Free Shipping
Condition: New
Location: China
• Wavelength: 450nm. 1 x Powerful Laser Flashlight. This laser pointer can be used for presentation, teaching indicator and more. • Beam style: continuous ... moreline. Use your laser pointer to point at any desired targets on projection screen, video.
$
849.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
IPG LASER Ytterbium Fiber Laser. label missing.
$
51.99
Buy It Now
Free Shipping
Condition: New
Location: China
1 X 450nm 1000mW~1200mW blue laser module with TTL Driver board. 2,Output Power:1000mW~1200mW. 1,Wavelength:445nm~450nm. 1000~1200mW blue laser module ... more7, TTL signal input 0~5V input. ( TTL Modulation: Make sure input TTL level PWM dightal signal ).
$
180.39
Buy It Now
$4.00 Shipping
Condition: New
Location: 江夏区, China
520nm 1000mW Focausable Dot Laser Diode Module TTL + 12V Adapter. 1x 520nm 1W TTL Laser Diode Module with Fan. Note: We have 12V US/EU/AU/UK-Plug Adapter. ... moreSpot mode: DOT. (If there is no PWM signal, can connect the PWM line to 12V in parallel.).
$
66.49
Buy It Now
Free Shipping
Condition: New
Location: China
445nm 1W/1000mW focusable blue laser module. Wavelength 450nm. Power output: 1W(1000mW). Laser Shape: dot beam. Modulation Mode (TTL ) 2.1/5.5 DC input ... moreinterface. 1X 1W/1000mW Focusable Blue Laser Module.
$
199.99
Buy It Now
Free Shipping
Condition: New
Location: China
1 X TTL Signal 638nm 1000mW/1W Red laser module. 7,TTL Signal:Yes,Low level(0V):OFF,High level(5V):ON;. 8, TTL:Yes, White cable at + and Blue cable at ... more-;. 13,Size:Laser Module:90 40 40mm;. 14,Life of Laser module:>5000 hours.
$
299.99
Buy It Now
Free Shipping
Condition: New
Location: China
15W 450nm Laser Head DIY Laser Machine Focus Adjustable TTL/PWM 15000mW blue laser module laser cutter for CNC engraving machine. --Light power: 15 Watts ... more(15000mw). --Laser module power is relatively large, only for industrial use, to prohibit the exposure of the eye, otherwise it will cause permanent blindness, the consequences at your own risk.
$
185.00
Buy It Now
Free Shipping
Condition: New
Location: China
1 Wavelength: 520nm. 2 Output Power: 1000mW. 6 TTL signal input: 0V ON/5V OFF. It can burn plastic, paper, balloons, cigarettes, wood and so on. 10 Lens: ... moreGlass. 8 Cooling mode: Heatsink and Fan. 3 Adjust the focus: Yes.
$
57.50
Buy It Now
$6.15 Shipping
Condition: New – Open box
Location: Alviso, United States
Test report included with each module. Manufacturer: JDSU / SDL. Photodiode Sensitivity: 0.1 - 10.0 uA/mW. Thermistor type: 10K NTC. TEC Current: 3.5A ... moremax. The manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user with all necessary safety warnings and information.
$
166.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Nichia NDG7475 1W 520nm Laser Diode. So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2. ... moreI expected this thing to dim maybe around 2.5A but it just kept going.
$
84.98
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 638nm. Laser diode in: Nichia. Focal length: 20mm-200mm for engraving/marking. Net weight of the laser: 180g. Focal lens: glass. Working life: ... more8000-10000hrs. Note: the adapter only have US, EU standard.
$
58.05
Buy It Now
Free Shipping
Condition: New
Location: 江夏区, China
Wavelength: 450nm. Output power: 1000mW. 1pcs High-Power 450nm 1000mW 1W Pure Blue Laser Dot Module. Aluminum alloy shell + imported laser diode + K9 ... moreglass lens + constant current drive board. Spot mode: Dot.
$
199.99
Buy It Now
Free Shipping
Condition: New
Location: China
Light power: 2.5 Watts (2500mW). --Laser wavelength: 445nm (blue violet). Carving wood / bamboo / paper / plastic / leather / rubber / horn. --Module ... morematerial: copper. --Drive mode: external ACC constant current drive.
$
53.67
Buy It Now
$6.00 Shipping
Condition: New
Location: 江夏区, China
Output power: 1000mW. Structure features: laser tube + lens + cooling shell. Housing material: aluminum. Reverse connection protection: with automatic ... moreidentification of positive and negative polarity.
$
121.99
Buy It Now
Free Shipping
Condition: New
Location: China
This laser adopts an imported 520nm green laser diode, that a green laser diode directly emits light. The non-808nm laser diode is converted into a 532nm ... moregreen laser by a crystal. It can start and work at low temperature.
$
41.89
Buy It Now
$4.00 Shipping
Condition: New
Location: 江夏区, China
850nm 1W IR Focusable Dot Laser Diode Module + Fan Cool + Driver TTL. Output power: 1000mW. Note: 850nm high power modules can only be seen a weak red ... morelight. Wavelength: 850nm. 1x 850nm 1W Dot Laser Module w/ Driver.
$
112.18
Buy It Now
$15.00 Shipping
Condition: New
Location: China
5.5W 450nm Blue Laser Module Laser Engraving and Cutting TTL Module 5500mw for Stainless Steel 3mm Wood. - Light power: 5.5 Watts (5500mW). - Laser wavelength: ... more450nm (blue violet). - Collimator lens: optical glass coating.
$
55.89
Buy It Now
$4.00 Shipping
Condition: New
Location: 江夏区, China
450nm 1000mW Blue Dot Laser Diode Module + 12V Adapter. Wavelength: 450nm Output power: 1000mW. 1x 450nm 1W dot module. Laser shape: Dot.
$
199.99
Buy It Now
Free Shipping
Condition: New
Location: China
1000mW 445NM Adjustable focus 12V high power laser head blue purple light laser module accessory for DIY Laser engraving machine. Wavelength: 445nm. Power: ... more1000mW. Luminance: green light>red light>bluish violet light.
$
41.89
Buy It Now
$5.00 Shipping
Condition: New
Location: 江夏区, China
850nm 1W IR Focusable Dot Laser Diode Module + Fan Cool + Driver TTL. Output power: 1000mW. Note: 850nm high power modules can only be seen a weak red ... morelight. Wavelength: 850nm. 1x 850nm 1W Dot Laser Module w/ Driver.
$
140.00
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength : 520nm(120mW)+638nm(250mW)+450nm(600mW). Combined Optical Power output: 1000mW. Modulation: TTL 0-30kHz /0V off and 5V on. 1 PCS RGB Laser ... moreModule.
$
35003.22
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Part No: WAFERLASE ULTRA. This Rofin Baasel WAFERLASE ULTRA 100mm to 200mm Wafer Laser Marking System is used working surplus. The physical condition ... moreis good, but there are signs of previous use and handling.
$
245.00
Buy It Now
Free Shipping
Condition: New
Location: China
Modulation :Analouge Modulation. Wavelength(nm) :520nm. Output power(mw) :1000mW+. Transverse mode : square shape. Polarization ratio >100:1.
$
140.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Nichia NDG7475 1W 520nm Laser Diode. So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2. ... moreHere is what you get. One 9mm 1W 520nm diode mounted in a 12mm x 30mm copper module with leads and a G-2 glass lens.
$
52.34
Buy It Now
$4.00 Shipping
Condition: New
Location: China
1pc Focusable 1000mW 450nm Blue Laser Diode Module. Spot shape:Dot. Lens Material:PVC Focus Lens. Structural features:Aluminum shell+ laser diode+ K9 ... moreglass lenses+ Constant current driver board. 1pc 12V Adapter.
$
48.46
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: Wavelength:445nm~450nm Output Power:2000mW Adjust the focus:Yes(By fingers),2A; TTL:Yes,White cable at + and Blue cable at -; TTL signal ... moreinput 0~5V input.(0V OFF/5V ON)(TTL Modulation control the output beam OFF / ON ) Outer driver board:working more steady than inner driver board; Frequency for TTL control:0-20KHz; Duty cycle:input 1%-100%; Red cable at "+",Black cable at "-"; Package: 1 X 450nm 2000mW laser module with TTL Driver board.
$
109.48
Buy It Now
$18.89 Shipping
Condition: New
Location: 江夏区, China
Modulation Option: TTL/Analog 10KHZ. Output Current: 3.0A.
$
77.50
Buy It Now
$6.15 Shipping
Condition: New – Open box
Location: Alviso, United States
Test report included with each module. Manufacturer: JDSU / SDL. Photodiode Sensitivity: 0.1 - 10.0 uA/mW. Thermistor type: 10K NTC. TEC Current: 3.5A ... moremax. The manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user with all necessary safety warnings and information.
$
127.50
Buy It Now
$6.15 Shipping
Condition: New – Open box
Location: Alviso, United States
Test report included with each module. Manufacturer: JDSU / SDL. Photodiode Sensitivity: 0.1 - 10.0 uA/mW. Series: 2380. Thermistor type: 10K NTC. TEC ... moreCurrent: 3.5A max. The manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user with all necessary safety warnings and information.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
1 Watt Fiber Coupled IR Laser Diode Burns! made by SDL
High Power fiber coupled IR Laser Diode! This is a great laser diode made by SDL. It is doing about 1 Watt of ~835nm laser radiation out of the fiber. At a current of 1.5 to 2 amps. It can do even more at a larger current, with some reduction in the diode's overall working lifetime. Updated information: The diode is SDL model 2364-L2. Take a look at the of this diode by following. Here are a few key specifications: Output power: 1 Watt, Center wavelength: 830nm +/ 15nm, Threshold current: 0.3A(nominal) Operating current: 2.0A(max) Fiber core diameter: 60 um, Fiber cladding diameter: 125 um, Fiber sheath diameter: 900 um, Fiber NA: 0.22, This is more than enough laser power for setting paper on fire. Woodburning, etc. It is also more than enough for permanently blinding you- so use only with knowledge of laser safety. Most of all. USE ... morePROPER LASER PROTECTION EYEWEAR! The seller or eBay will not be held responsible for any damages to body or property caused by the use of this item. The diode is tested and works great. ESD precautions were strictly followed when handling this diode. You should use a"clean" power source to power this diode- voltages spikes would damage it. Two"D" size batteries with a current limiting resistor would do fine. I have written an instruction sheet to help people safely operate this diode. It is not meant to be a complete guide to using laser diodes. But it should help you get started. Here is the. This item is guaranteed non-DOA! Take a look at my on eBay! Terms and Conditions. If you have any questions regarding this item. Feel free to ask and we'll answer to the best of our knowledge. Payment through Paypal is preferred. a bank wire transfer is also possible. For other methods. Please contact us directly. We ship all over the world. We've shipped countless times to the USA and Europe. And it goes smoothly and quickly. Estimated delivery time is up to 14 days. The preferred shipping method is EMS(Postal Service Express Mail Service) very reliable in our e
Optopower 1 watt, 830nm FC Laser Diode. (Business closing. Clearance)
Presstek AHH03131.FC Diode with Focusing Lens. Business Closing. Clearance* PHOTOS Click picture to see actual image size BACK TO TOP- DESCRIPTION Optopower OPC-A001-FC. 825 Fiber Coupled Laser Diode. Listed Below are some estimates: Wavelength: 825nm Threshold: 385mA Output:0.5a-50mw 1.0a-440mW 1.5a- 800mw 1.8a-1000mw 2.0a 1150mw Wiring: Gray is case(+) Blue is( The values noted above are offered estimates only. Clearance Sale. Preparing to Close the Business. Due to the ESD and shock sensitivity of this/these items there will be NO refunds or exchanges on lasers under any circumstances. Please bid accordingly. BACK TO TOP- PAYMENT TERMS You must pay within 5 business days after purchasing or winning an item. Items not paid for within five business days may be sold to another buyer. CASHIER'S CHECK PERSONAL/BUSINESS CHECK(check must ... moreclear before the item is shipped) or BANK WIRE TRANSFER(Buyer to pay $16.00 wire transfer fee) BACK TO TOP- SHIPPING INSURANCE Please specify your zip code when requesting a shipping quote. USA- Continental CALL FOR QUOTE USA- Hawaii or Alaska CALL FOR QUOTE Canada CALL FOR QUOTE International CALL FOR QUOTE Insurance is not offered. Buyer to pay all shipping and handling costs. Shipping Notes: Our shipper of choice is If a flat shipping and handling charge is not specified the Buyer must request a shipping quote. Combined shipment accepted only if the items can be combined and are shipped at the same time. Buyer should contact us before assuming combined shipping terms. Most items are available for pickup unless otherwise specified. Items must be prepaid or Cash/Cashier's check only at the time of pickup. Duties and taxes are the Buyer's responsibility and are paid directly by the Buyer. BACK TO TOP- RETURN POLICY The items you are buying from MrGizmos.com are used. Surplus, or refurbished and are sold in the condition received by MrGizmos.com. All items that are NEW will be clearly noted. We make no express or implied warranties or representations
Spectra-Physics Navigator 1 X15SC Q-switched Laser System 1064 nM 7 Watt
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ELECTROLAB INC. 10121#A IMPERIAL AVE. CUPERTINO. CA 95014 U.S.A. TEL: 408-257-2445 FAX: 408-257-6310 elctrolb@electrolab.com Sale. Leasing& Buy Test Equipment Spectra-Physics Navigator 1 X15SC Q-switched Laser System 1064 nM 7 Watt. Tested, good. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 These SP Navigator I industrial Q-switched lasers are used. Have been fully tested. The laser output is stable. At good working condition. Multiple units are available. Wavelength: 1064nm Output Power: 7W at 20KHz, 100% rate(Actual power for each unit may be ± 5% high/low from 7W) Repetition rate: 20KHz Pulsewidth: This completed laser system includes a Navigator I laser ... moreoscillator, a diode laser pump system(40W) and power supply. All connected cables and operating CD/manual. The laser is ready to be operated after simple hook-up and software installation. Highlights of SP Navigator Q-switched laser The Navigator design focuses on high uptime and easy serviceability through: Unique diode modules and fibers that can be easily replaced in the field. Diodes that last up to double the industry average. Unique field-replaceable laser output window to allow operation in typical industrial environments which are subject to contamination and airborne particulates generated from the ablation process. A Graphical User Interface(J-Win) enables easy access to the many advanced features that are accessible through RS-232 Serial Communication Application• Laser scribing of thin film solar cells• Laser resistor trimming• Laser marking on various metals and plastics• LIDAR• Cutting PCB and film For detail. Please ref manufacturer’s website: NOTE TO BUYER: Price is for FOB. Buyer pays for all Shipping and Handling costs. For International Buyers. Buyer is responsible for all customs and duties. For California Buyers. Buyer pays state tax. If you are interested
405nm 1000mW 1W 1 Watt Laser Diode Module with 405-G2 Lens Opnext HL40023MG
1000mW(1 Watt! 405nm Violet Laser Diode Module Here is a laser diode assembly removed from low hour prototype equipment which houses a very high power 405nm ultraviolet laser diode. This diode has similar specifications to the Opnext HL40023MG which is rated to produce 400-500mW and is easily overdriven to 1000mW or more. We've individually tested these and guarantee that they will produce 1000mW at around 750mA. Please note that like all laser diodes. These are sensitive to static, overcurrent, reverse voltage and back reflections. Our warranty does not cover diodes damaged due to misuse. Specifications: Output Power: 400-500mW(rated) 1000mW(tested) Wavelength: 405nm +/ 5nm. Threshold Current: 160mA. Operating Current(400mW) Operating Current(1000mW) Operating Voltage: Package: 5.6mm can. Isolated leads. Thorlabs sells the Opnext HL40023MG ... morefor over $1600 each new! Click for more information and a complete spec sheet from the Thorlabs web site. These diodes have 2 leads rather than 3 as shown on the spec sheet. But otherwise have the same specifications. The module is easily disassembled to extract the laser diode and a very nice 6.3mm aspheric collimating lens AR coated for extremely low loss at 405nm. This lens performs similarly to the popular 405-G2 lens. Here I've got a module with the extra optics removed leaving just the collimated laser diode. The laser diode is pressed into a copper heat sink. It can be pressed out with the appropriate tool. See our other auctions for brand new. Bare laser diodes. To see other related items. Be sure to Visit my eBay Store If you like what you see. You can Add Junktronix to your Favorite Sellers List Why Buy From Junktronix? eBay member in good standing since 1996 We specialize in lasers and photonic test equipment and have developed expertise and tools to properly test most of the items we sell All items offered with a 100% Satisfaction Guarantee Payment We always accept payment by PayPal. If your organization does not allow PayPal. Please contact us to arran
Blue Laser 1.2 watt Focusable
You are bidding on my personally owned Blue flashlight-styled focusable Blue laser. This laser is rated over 1.2 watts. It will burn hair. Skin matches and light wood on fire. It is not a toy, and I wouldn't fire it without the free supplied glasses.
1 Watt Fiber Coupled IR Laser Diode Burns! LOT of 10
LOT OF 10 High Power fiber coupled IR Laser Diode! NOTE: This is a listing for a lot of 10 diodes at a special price! This is a great laser diode made by SDL. It is doing about 1 Watt of ~835nm laser radiation out of the fiber. At a current of 1.5 to 2 amps. It can do even more at a larger current, with some reduction in the diode's overall working lifetime. Updated information: The diode is SDL model 2364-L2. Take a look at the of this diode by following. Here are a few key specifications: Output power: 1 Watt, Center wavelength: 830nm +/ 15nm, Threshold current: 0.3A(nominal) Operating current: 2.0A(max) Fiber core diameter: 60 um, Fiber cladding diameter: 125 um, Fiber sheath diameter: 900 um, Fiber NA: 0.22, This is more than enough laser power for setting paper on fire. Woodburning, etc. It is also more than enough for permanently ... moreblinding you- so use only with knowledge of laser safety. Most of all. USE PROPER LASER PROTECTION EYEWEAR! The seller or eBay will not be held responsible for any damages to body or property caused by the use of this item. The diode is tested and works great. ESD precautions were strictly followed when handling this diode. You should use a"clean" power source to power this diode- voltages spikes would damage it. Two"D" size batteries with a current limiting resistor would do fine. This item is guaranteed non-DOA! Take a look at my on eBay! Terms and Conditions. If you have any questions regarding this item. Feel free to ask and we'll answer to the best of our knowledge. Payment through Paypal is preferred. a bank wire transfer is also possible. For other methods. Please contact us directly. We ship all over the world. We've shipped countless times to the USA and Europe. And it goes smoothly and quickly. Estimated delivery time is up to 14 days. The preferred shipping method is EMS(Postal Service Express Mail Service) very reliable in our experience. It has online tracking and insurance is also available for a small fee. We COMBINE SHIPPING for multi
Synrad H48-1 Sealed CO 2 10 Watt Laser & Power Supply input 30 VDC Excellent
This auction is for 1 Synrad H48-1 Sealed CO 2 10 Watt Laser input 30 VDC Includes good working Power One Power Supply SPL250-1024 Excellent Used Pullout these may be new units ready for a quick install they are fully wired with the connectors supplied ready to hook up. li Best Offers Responded to within 24 hours. We are a seller and buyer of industrial equipment with over 35 years experience. Purchase our products with confidence. If you are not satisfied returns are gladly accepted. Contact us about all of your industrial equipment needs: All best offers on Ebay will be responded to within 24 hours. Thanks for looking! My Policies: 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and we will try to work it out with you. We usually ship the next business day after ... morepayment is received. We also offer Expedited shipping on all products. Look under shipping options near the top of the page. We reserve the right to ship via the fastest and most affordable method for our customers. We will always try to combine shipping. Although we will add a small supplies charge to each shipment to cover costs. Checkout my feedback and buy with confidence! No liability expressed or implied on installation or suitability for a particular use. Visit our Ebay stores for more great items and ProStores website at WWW.INDUSTRIALSURPLUSSTUFF.COM Pictures are typical of the units described. I DISCLAIM ANY WARRANTY OF SUITABILITY FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO. BUT NOT EXCEEDING, THE AMOUNT PAID TO ME FOR THE PRODUCT, INCLUDING: I SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. I am not a distributor of original manufacturers and I am not a party to any manufacturer’s warranty that may or may not apply. Another auction from Surplus and Used Electrical Stuff. Powered by
Equinox Apache 7 Colour Laser 1.2 watt DMX512 ILDA
Amazing Laser. Multi-colour, great FX. Used a handful of times. Boxed and in great condition. See it in action on this video: http:www.youtube.com/watch?v=B2LXBeTJRv8 Posted with ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-1404051d745-0x101-
Laser Blau 1 WATT 1000mW 445 Nm
Hallo, verkaufe hier meinen selbst gebauten Laserpointer. Hab mir einfach einen chinalaserpointer und eine 1000mW Laserdiode gekauft und versucht daraus einen Laserpointer zu bauen. Leider komme ich damit nicht so klar. Bei der Diode war eine glaslinse dabei. Aber irgendwie hab ich das nicht geschafft einen schönen strahl hinzubekommen. bei mir geht der nach vorne hin auseinander. Für jemanden der sich besser auskennt wird das bestimmt ein Kinderspiel sein wie man die Linse ausrichten muss. Es ist auch eine Schutzbrille dabei die ich sehr empfehle aufzusetzen. Da das eine sehr starke Laserdiode ist. Mit dem Laser hab ich sogar ein stück Papier durchgeschnitten. Ich verkaufe den Laser deshalb defekt weil er noch nicht fertig ist. man muss hald noch die linse ausrichten und er wird sehr schnell heiß deshalb geht er nur kurz ... moremit voller Leistung. das beste wär wenn man die diode ausbaut und in einen größeren kühlkörper einbaut.
Coherent LaserMate Laser Power Energy Meter with LD-1 Detector, 1 watt Max.
Used In Excellent Working Condition Coherent LaserMate Laser Power Energy Meter with LD-1 Detector. 1 watt Max. For Fiber Optics Applications Comes with AC Adaptor
High Power Blue Green 1 to 3 Watt Laser Diode Glass Collimator Lenses Set of 2
These are small glass collimator lenses that are about 5.6mm in diameter and have a focal length of about 4.5mm. They are coated for blue to green laser light and are rated for up to 3 watts of laser power. The lenses could also be used to pump crystals or launch a beam down an optical fiber as well. For the cost of these and a few bucks more you could fix a 2.000 dollar piece of gear! I have lots of laser and other unique stuff for sale this week.
1-2 Watt 445nm Diode Laser Host Glasses and most of the partz.
Mouse over each photo to see whats up. A complete laser host that needs TLC to work with that 1-2W 445nm laser diode that may be laying around. Includes the nice carrying case. A working Axiz 1W laser diode driver. Adjustable focus lens and all original parts except the original driver that was just a crispy critter. Either one 18650 or two 16340 Li-Ion batteries will fit and are not included. The original diode was removed and is now in LEO. If I never see another laser diode again it'll be too soon. Until you've lived in New Mexico at 7400' with an average humidity of less than 10% it is impossible to appreciate what static electricity can be like. Routine 3/4" sparks. bed sheets that flare bright enough to read by. That and my truly dynamic response to it's effects. All of which is a good reason to move to Houston. ... moreTX. PLEASE READ THIS! I PRINT ALL USPS POSTAGE AND FEDEX LABELS USING EBAY'S SERVICE SO DON'T ASK ME TO SEND TRACKING INFORMATION. IT SHOWS UP AUTOMATICALLY IN THE"PURCHASE HISTORY" LINK NEAR THE TOP OF THE LEFT COLUMN OF YOUR LANDING PAGE. Ask me(I'm easy) and I'll combine shipping for up to 7 days AND. PLEASE PAY ASAP. I HAVE EXPENSIVE HABITS.
Coherent LaserCheck Handheld Laser Power Meter 400~1064nm / 9.99 µW to 1 Watt
This Ebay listing is for ONE Coherent LaserCheck Handheld Laser Power Meter with a spectral range of 400 to 1064nm and power range of 9.99 µW to 999 mW. We now only have 2 pieces available. These were included in a field maintenance kit for a piece of BioTech equipment that had a 150mW 532nm laser inside. These were included in the kit and returned to the service department afterwards, They have been used less than 5 times each. They all come with instructions, original Coherent certificate of calibration and declaration of conformity. These do not come with cases as the others I had did. 3 have S/N's lightly engraved on the back and 1 does not. List price is $450 from Coherent. Save big here. $160 each with FREE USPS Priority mail in the US. I was selling the ones with cases for $180 so I lowered the price for these by $20. In perfect ... moreworking order and ready to go! We'll give each our 90 day No DOA warranty(Batteries not covered) The winning bidder has 48 hours to make contact via email providing a shipping address and the method of payment. Payment must be received no later than 5 days after the auction ends. If paying via PayPal after the auction ends you do not need to contact us, You will receive an invoice with a total amount due and a link to PayPal. Bid with confidence at esoteric_specialties! Specifications, Sensor Type, Silicon Cell, Built-in Attenuator, 1 mm-thick NG-10, Aperture Size, 8 mm, Wavelength Range, 400-1064 nm, Accuracy, ±5% Max. CW Power, 10 mW, Max. CW Power with Built-in attenuator, 1W, Min. CW Power, 0.5 µW, Min Power Resolution, 0.01 µW, Displayed Power Ranges, 9.99 µW to 999 mW, Max. Power Density, 0.5W/cm2, Max. Power Density with Built-in Attenuator, 30W/cm 2 Measurement Display, 3-digit LCD with power unit indicator,
Coherent LaserCheck Laser Power Meter Multimode 400-1064 nm .5 uW to 1 Watt
Coherent LaserCheck Laser Power Meter Multimode 400-1064 nm.5 uW to 1 Watt Very little used. If at all. Power meter was part of the tool kit included with an instrument that contained a Coherent 150Mw DPSS laser. Shown below measuring a 250MW green DPSS laser set to its lowest power setting. Comes with case, user manual and certification papers. Laser Checker is in excellent cosmetic condition. Cases have minor skuffs. Guaranteed to be working perfectly. For more info see: NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of auction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included ... morein the shipping price. Flat fee shipping amounts apply to lower 48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or have any questions. Please contact me BEFORE placing your bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software.
1,500 Watt Amada Model Lasmac LC 1212 CX II Laser, S/N 11212307 (1995)
INDUSTRIAL ASSETS MACHINERY IS PLEASED TO OFFER FOR YOUR CONSIDERATION: REFERENCE# 10188 Amada Lasmac Laser MODEL: Lasmac LC 1212 CX II S/N: 11212307 Year: 1995 Specifications: Wattage 1.500 Sheet Size 49" x 49" Sheet Length With One Reposition 98" X Axis 49.2" Y Axis 49.2" Z Axis 11.8" Max. Material Thickness(Carbon Steel) 0.375" Max. Material Thickness(Stainless Steel) 0.125" Max. Material Thickness(Aluminum) 0.080" Max. Cutting Speed 785 IPM Max. Table Speed 3.150 IPM Work Chute Size 21" x 96" Dimensions(LxWxH) Equipped With: Fanuc 16L CNC Control Fanuc C1500B. 1,500 Watt Laser Resonator Automatic Sheet Repositioning Programmable Assist Gas Control Work Chute Chiller Dust Collector Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon ... morerequest. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ o
Coherent 1-3 Watt Red IR Laser Diode Optic Glass Collimation Lens Lot of 2
These are extremely high precision glass collimator lenses for use with lasers up to 1 watt of red. Or 3 watts of IR at 808nm. These lenses are about 5mm in diameter and about 3mm FL. They are ideal for the first optic in the collimation system for higher power C-mount laser diodes due to their short focal length allowing you to gather most of the light. Optics suppliers sell these for upwards of 25 dollars each PLUS SHIPPING, which i think is ridiculous for such a small simple part! I have lots of laser and other unique stuff for sale this week.
CREO KODAK LASER DİODE 20 PCS 1 WATT FIBER DIODES
CREO KODAK LASER 1 WATT FIBER DIODE. THIS DIODE IS USED FOR KODAK THERMOFLEX MID THERMOFLEX NARROW CREO PLATESETTER KODAK MAGNUS 400 AND OTHER CREO SCITEX CTP MACHINES WITH FIBER DIODE HEAD 1+1 YEARS KODAK GRAPHIC OFFICAL WARRANTY PERFECT CONDITION SIPPING BOX INCLUDES 20 PCS 1 WATT FIBER DIODES + 1 MORE DIODE(FREE OF CHARGE) FOR IFIX PREPRESS COMPANY KODAK GRAPHIC WORLWIDE SHIPPING SYSTEM Item: 1 watt fiber diode Quantity: 20 pcs +1pcs 21 pcs Warranty: 2 Years Shipping to IFIX prepress company/Ohio USA
DPSS LASERS 3510-100 SERIES 3500 UV LASER SYSTEM 1 WATT 100 KHZ 355 NM THERMOTEK
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. DPSS LASERS 3510-100 SERIES 3500 UV LASER SYSTEM 1 WATT 100 KHZ 355 NM This auction is for one ... moreDPSS Lasers 3510-100. This auction includes the following: One(1) DPSS Lasers 3510-100 Laser, One(1) DPSS Lasers Controller, One(1) Thermotek T255p Chiller, One(1) User's Manual, All Cables Shown, The Series 3500 DPSS laser(US Patent#6.002,695) is the most efficient, high power, quasi-CW DPSS UV laser commercially available. Using only a single 20W diode bar, the Series 3500 has demonstrated powers in excess of 3.0 Watts at 355 nm. This high efficiency conversion means that the laser can be operated at the normal specification, with minimum stress to the optical components and with a reduced diode current to extend the operating life. Minimizing the diode power required to generate the 355 nm third harmonic also minimizes the thermal effects in the gain medium(Nd:YV04) Which results in the lowest possible distortion to the beam. Both the second and third harmonics are generated intra-cavity, thus reducing the need for tight focusing into the non-linear crystals. The result is a stable, high power UV laser with an M² specification of This unit has the following features: Up to 3W Power at 355 nm, Rugged. Low Maintenance Design, Excellent Beam Quality M² Q-Switched R
1 Watt Blue Laser Module With Power Supply.
1 Watt Blue Laser Module With Power Supply. Search This auction is for a 1 Watt Blue Laser Module With Power Supply. It comes as you see it in the photos with the power suply and regulator board so it runs straight from a normal 240v plug. Idel if you are building your own laser or if you want to upgrade your old one. Please note that this module MUST be used with a set of galvo's or scanners and never left in a static position as it does burn. AS WITH ALL OUR SALES i F ITS NOT IN THE PHoTOS OR DESCRIPTION IT IS NOT INCLUDED. Visit our ebay store for more bargains and fixed price goods. We will try and answer all questions via the"ask seller a question form" but please do not leave it until the last few hours of the auction as we may not have time to answer. We will offer replacement or refund on goods found to be not as desecribed ... moreprovided you inform us within 24 hours. All returns must be in original packing and condition. Refunds are less delivery costs and EBAY fee's and charges. and the buyer is responsible for returning goods at there cost(recorded delivery advised) Goods listed as sold as seen only are excluded from this service and carry no guarantee or return… Auction terms and conditions. We reserve the right to relist items if no contact is made within 48 hours and/or goods not paid for within 2 days. Negative feedback will be left for non-payers full stop! As we sometimes sell old/outdated technical hardware please satisfy yourself that it is what you need before you bid as we will not refund on goods that are not what you expected/needed. Or that you are unable to get hold of drivers/leads/information etc. also note that as most of our goods are second user we offer no warranty on built in battery packs. Packaging may be incomplete and there may be marks and or scuffs etc on the products. All items sent will require a signature on delivery and if a parcel is returned to us as undelivered we will have to charge again for re-posting. We pack all products with care and all items delive
ARCTIC SPYDER III by Wicked Lasers 1 WATT (1000mW) 445nm, class 4 laser
1000mW ARCTIC S III. CLASS 4 LITHIUM POWERED, WATERPROOF, AND ULTIMATELY POWERFUL HANDHELD LASER! This LASER is completely legal, its cool-blue but blazing hot, 1WATT laser beam will burn through balloons, plastic, and much more. The S3 has 9 different operating modes as well as powerful safety features including a safety interlock,as well as the SmartSwitch 2.0. You can lock out unauthorized access making it safe while your not around. Also included is(1x) Li-Ion 18650 IMR rechargeable battery and charger. You should never operate this laser without approved safety eyewear(1x) pair approved eyewear IS included, along with(1x) belt holster. 100% unlimited duty cycle, allows you to operate laser continuously, 24/7 with no risk of damaging the diode. WARNING: Extremely dangerous is an understatement to 1 Watt of laser power. At close range, ... morethis class 4 beam will cause immediate and irreversible retinal damage. use with extreme caution, and only while wearing the approved protective eyewear. DO NOT SHINE LASER AT AN AIRCRAFT! This is a FELONY. NEVER AIM AT VEHICLES OR LAW ENFORCEMENT. DO NOT USE AS A LASER POINTER. AVOID EXPOSURE TO BLUE LIGHT(can cause photochemical eye damage) This laser is sold as is, i will not accept any returns, and I will not be liable for anything resulting from use of this laser. Also included is the owners/ operational/ safety manual, It is Highly recommended reading before operating laser. THIS IS NOT A TOY. WITH GREAT POWER COMES GREAT RESPONSIBILITY. THAT ALL SAID THIS LASER IS SUPER FUN VERY COOL. AND WOULD BE AN INVALUABLE TOOL FOR SURVIVAL SITUATIONS. LASER IS CAPABLE OF INSTANTLY IGNITING, AND BURNING PAPER, PLASTIC, WOOD, AND MUCH MORE. AT NIGHT BEAM CAN BE VISIBLE UP TO AND GREATER THAN 6+ MILES! 9 different modes include both high and low power strobe and constant beams. also S.O.S. beacon mode(both also have hi and low power modes) and tactical hibernation mode. GOOD LUCK BIDDING.
Wicked Lasers 1 watt Krypton and 1.25 watt Arctic laser
This is a WickedLasers true 1 watt Krypton and a 1.24 watt Arctic laser+ both expended lens sets batteries charger and safety glasses both are very powerful and you should wear safety glasses when ever using these lasers never point at people animals cars or planes
Wicked Lasers Spyder Arctic III S3 - Blue - 1 Watt 445nm handheld Laser
I bought this 1W laser when they were first released. And at the time were the most powerful production blue laser. Since then I've built my own 2W laser and hate to see the Arctic III collecting dust so I figured I'd sell it and let someone else enjoy it. Remember this is NOT a toy! It comes with the safety goggles. A beam spreading lens, two Li-Ion rechargeable batteries and charger. There are many accessories available for it as well.
Pioneer CLD-52 Laser Disc Player & VSX-95 7.1 Channel 125 Watt Stereo Receiver
Search Our Store: Pioneer CLD-52 Laser Disc Player& VSX-95 7.1 Channel 125 Watt Stereo Receiver Welcome to ONE1STOPAUCTIONS Pioneer CLD-52 Laser Disc Player& VSX-95 7.1 Channel 125 Watt Stereo Receiver Units are in great working order! CLD-52 Laser Disc Player Details: 1-Bit DLC D/A Converters Auto Loading and Automatic Disc Discrimination Functions Last Memory Function Plays all New Disc Types and Sizes Features'Film Mode; for reproducing Natural Movie Ambience Provided with S-Video Connector and 3-Line Digital Y-C Separation Circuit Single-Play Mode for Use with Sing-Along Karaoke Discs Digital Level Control Using JOG-Dial Adjustment VSX-95 Elite Receiver Details: Dolby Pro Logic Surround performed by a Digital Signal Processor(DSP) DSP provides five Sound Field Control(SFC) simulated surround settings Multi-Room and Source- ... moreUsing this unit in combination with the optional MR-100 Multi-room System Remote Control Sensor(Not included) Unit lets you enjoy different sources in different rooms at the same time Enhancer. Split Screen Function Input Attenuator Auto source control function Confirm function(remote control operation) Equipped with the JOG dial. Designed for easier operation There are a few scratch and scuff marks and some residue from prior use. Overall good cosmetic condition. Comes with Remote. See Photos for further Details. We Are Pottstown Cash Traders 232 East High Street Pottstown. PA 19464 SHIPPING | PAYMENTS | RETURNS | ABOUT US | CONTACT US Continental US shipping is quoted in the auction. We do not sell or ship internationally Shipping& handling is quoted flat rate parcel post or priority for the U.S. Parcel post shipping does not include tracking. Only delivery confirmation. Parcel post can take up to 11 working days. Larger packages will be assessed according to the U.S.P.S. charges past zone 5. All items selling for over $250.00 will include signature confirmation. Please contact us for a quote on larger items. If you feel that our shipping& handling is too high-PLEASE d
1 Watt (1,000 mW) Laser Special FX Light
The pictures above show the laser beam in light fog pointing towards a rotating disco ball. Items will be shipped within 2-3 business days of purchase. I will be out of town from August 16th until August 23rd and will be unable to ship items during this time.
WICKED LASER BLUE HANDHELD 1.0W ARCTIC SERIES SPYDER III 3 1 WATT HIGH POWER EC!
New Page 6 Welcome to Simple Easy Auctions. the way it should be. PLEASE MAKE US AN OFFER AS ALL OFFERS ARE CAREFULLY CONSIDERED. AND THE OFFER AMOUNT WE ARE WILLING TO ACCEPT MAY CHANGE AT ANY TIME! WICKED LASER BLUE HANDHELD 1.0W ARCTIC SERIES SPYDER III 3 1 WATT HIGH POWER Spyder 3 Arctic Blue Handheld Laser. 1.0W. Wicked Lasers. FIRST GENERATION. USED ONLY 2 OR 3 TIMES WORKS PERFECTLY. NOT A TOY. WEAR EYE PROTECTION OR PERMANENT BLINDNESS CAN OCCUR. INCLUDES EYE PROTECTION. LENS, CASE, CHARGER AND TWO BATTERIES. THERE IS A STRICT BUTTON PRESS SEQUENCE TO KEEP FROM UNAUTHORIZED USERS. DO NOT USE FOR A LASER SIGHT. INTENDED ONLY FOR HOBBYISTS AND ENTHUSIASTS ONLY. SOLD AS IS. NOT LIABLE FOR ANY RESULTS FROM ANY MISUSE OR LACK OR WEARING PROTECTION. FAST SHIPPING. Any Questions Please Contact Through Email-or- Questions Can Also Be Called ... moreIn To 845-430-1917-Please Leave A Message If I Cant Get To The Phone WHAT YOU SEE IS WHAT YOU GET- SOLD AS IS- INCLUDES EVERYTHING YOU SEE THE PICTURES ARE OF THE ACTUAL ITEM YOU WILL RECEIVE FINE PRINT: Please bid. Buy, or make an offer with absolute confidence. Check our feedback.upon writing this description we have well over 1300 all-positive feedback comments! QUESTIONS: Please ask any and all questions prior to bidding. Buying, making an offer or buying-it-now, Just click on the user ID: SimpleEasyAuctions under"Seller Information" at the top and follow the steps to submit a question, be sure to include the listing number and title if you can with your inquiry. If you want to call us we can be reached at 845-430-1917. But email through eBay is preferred. PAYMENT: Full payment must be received within 5 business days for items under one thousand dollars; anything over one thousand dollars full payment should be made no later than 10 business days of the end of the auction. Unless pre-arranged. Please calculate total cost and include shipping charges as indicated. Please include the item number with your payment. I accept payment made via Pay Pal
Green laser model # DHOM-100B 532nm 1.5 watt analog modulation
532nm 1.5 watt analog laser in excellent condition. Very low hours.
Wicked lasers green 1.5 watt lab laser DHOM high power burning 532nm
1500mw green laser 520nm stationary lab type laser model number dhom-100b this is a like new laser. Very nice and blindingly bright as seen in photos. No smoke or fog was used while taking pictures just ordinary household particles floating around. It comes with laser, a 5vdc power supply and a the analog trigger so it's ready to go out of the box thank you for looking g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-149be8f577e-0x110-
700mw 638nm Burning Laser Kit (no soldering) Red Handheld "1 Watt 1000mw"
Laser diode is new. And has no previous run time. Host has minimal signs of wear from an electric experiment- enamel scratched with sand paper/knife in inconspicuous places(starting price set to $138.82 instead of $155- subtracted cost of the host and inconvenience) Avoid exposure to rain- minimally water resistant. Tested 20min total to ensure proper working order. Due to the nature of the device(how easily parts are removed or altered out of the range of working specifications) no returns are accepted. This is not a toy. Must be 18 years or older to order. Assembly: Keeping the customer in mind. I have already done all the wiring. All that's left for you to do is to screw in the separate parts- ebay sellers are not allowed to sell complete lasers above"5mw" so I am selling this laser as a kit that you have to screw together. ... moreBe careful when assembling the laser; the wires can easily over-twist and break loose from the laser diode. So assemble it in the following order- keeping the wires from twisting around each other, screw in the: driver pill to the battery tube, the heatsink tube to the battery tube, and then the retaining ring. These instructions are shown visually in the pictures above. Device Operation: Laser driver set to 1.25A. Laser estimated to produce 700mw of output power. Replace the included glass lens with a G-2 or G-1 lens for red lasers for a full 1000mw(beam will be fatter/less pretty) The device operates on either 1x 18650 or 2x 16340 batteries(3.5 to 8.4 volts) Operation on the single battery will allow the laser to put out half power. And operating on two batteries will allow full power. I cannot include the batteries due to expensive shipping regulations- it would cost $20 more. Maintenance: If the laser ever stops working at all. Please disassemble the laser and if the wires connecting to the laser diode came loose, solder them back on: with the middle pin on the right hand side, the red wire goes to the top pin, and the black wire goes to the bottom pin. If these pins hav
1 USED 4000 WATT AMADA 6’ X 12’ LASER CUTTING MACHINES
REF. NO. C-4181 MFG: 2001 MODEL: FO-3015‘GEMINI’ 4000 Watts Power 60” X 120” Sheet Size 134” X-Axis 61” Y-Axis 7.87” Z-Axis 3.148 IPM Max. Positioning Speed 2.028 Lbs. Max. Table Weight Dual Pallet Table Shuttle Flying Optic Laser Fanuc 160il. 32 Bit Control Fanuc 4000 Watt Resonator Chiller Updated A/O– Pneumatic Original One Owner Machine Kept Under AMP Maintenance Contract Good Condition; Under Power In Midwest Plant Power On Hours: 67.082 Beam On Hours: 23.450 Price– Midwest Location $125.500.00
1 Watt 520nm Handheld Green Laser
Today I'm selling my ~1 watt 520nm build for a fair price. I had this laser for a month and it is still in good condition. There is a little wear on the top edge of the host. Please note that my laser power meter is about 15% off on reading the true power of any visible laser. For example if the meter reads 850mw the lasers power is really 1000mw. I found this out after cross comparing with two properly calibrated meters when doing a middle man trade back then. First off. This laser is extremely bright. The dot is a complete eye sore when not wearing goggles. 520nm light at 1000mw is approx 550 lumens. Putting that in perspective, this laser is twice as bright as a 5w 445nm laser. I'm asking for $400 for the laser and including 16340s batteries plus charger. Specs Wavelength: 520nm Output power: 1000mw Diode: ndg700 Diode current: ... more1.8 amps Driver used: x drive Host: x1 18650 sized white powered host. Use two smaller batteries. Operating voltage: 6-8 volts Boot method: side momentary doorbell button. No click) Lens: g-2 Has adjust focus
DHOM 1.5 watt 532nm lab laser pointer wicked burning laser
DHOM 1.5 watt lab laser. Very bright and powerful green laser,always use safety goggles when using and never point at people,planes,cars or flammable objects
Laserworld CS-1000RGB XS 1 Watt RGB Laser Light Show Projector ILDA Ex Demo
eBay- BayShopDesign.com |, |, |, |, |, sales@laserknowhow.co.uk Sign up for our FREE newsletter and be the first to hear about products offers! Please note that orders from unconfirmed addresses will be subject to a security check. Order and refund payment if the address cannot be confirmed. Item Description The Laserworld Club Series– SE Speed Edition is equipped with superfast 50kpps(special Xscan) scanners that significantly increase the quality of the effects and beams. However sometimes this is beyond the budget of a lot of customers. And therefore for the first time NRG Lasers by Laser Know How are offering our new XS Go faster scanners with a 50% improvement in speed and size on the standard CS range of ILDA lasers at an affordable price. The test set up has 3 laser projectors wired in parallel to 1 FB3 running Pangolin Quickshow. ... moreEach shot has the standard CS-1000 RGB left, top is our XS upgrade and right is the SE version. Our XS gives good value for money with bigger images, less flicker and sharper graphics than the standard model. The Laserworld CS-1000RGB is a RGB laser system with a total output power of up to 1'000mW. The red diode laser modules with a wavelength of 650nm. The green DPSS laser module with a wavelength of 532nm and the royal-blue diode laser module with a wavelength of 445nm ensure brilliant colors and powerful laser beams. The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of 2.0mrad. At the same time it offers a galvo system with up to 30kpps as well as a scan angle of up to 40°. The Laserworld CS-1000RGB has a professional ILDA interface. Thus own or pre-programmed lasershows can be shown by use of a laser control software. E.g. of Phoenix or Pangolin. Through DMX about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colors and in a various speed. The laser system has an automatic mode, which runs the pre-programmed patterns without assistance. If the music mode is active, the la
IPG ytterbium fiber laser 30 Watt ylp-1/100/30/30-HC
IPG 30 Watt ytterbium fiber laser YLP-1/100/30/30-HC. in excellent used condition laser was in service for a short period of time between 2010 and 2011 and has been in storage since. unit was used on semiconductor prototype machine. free shipping to continental US buyers only. buyers in other locations please contact for shipping quote. seller will ship to some international locations. Contact for more info. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14aad385ad4-0x102-
X-Laser Skywriter 1.8 Watt RGB Animation Laser with Pangolin QuickShow & Case
This auction is for"Skywriter RGB 1.8W" Pangolin QuickShow Laser Control Software with USB& ILDA Cable" Included Pangolin Software/Hardware costs almost($600) I have used this items 5 times in the last 2 years. So not much at all. This is due to my most gig being mobile& small gig, having to rig this was really hard as one man show. Laser& Software works grate no problem& issues at all! Included is everything that is in he pictures attached. Local pickup is free. Can arrange for delivery as well. Within 200miles range. Call or message for any more info 601-329-3881. Below is the details for both Laser& Control Software/Hardware Laser Skywriter RGB 1.8W Full Color 30K PPS Scanner Laser- Advanced Graphics/ Aerial Systems- Sound. Auto, DMX, ILDA& SD“X-LASER Skywriter” The name alone conjures up endless ... morepossibilities that are uniquely suited for an X-Laser. Production companies at home and abroad alike agreed and ordered it in record numbers making it our most frequently specified high powered laser platform of the last few years. Roadworthy and field serviceable. The 2012 Skywriters now feature higher output power, crisper optics, double the scanner speed, and even an SD card reader built right in so.ild files can be fired remotely from DMX. FDA Certified. Class IIIB& IV. Skywriters comply with UL, cUL, ETL, CE and IEC standards for high powered entertainment laser systems. Highlights 2X Scanner Speed: The 2012 Skywriters now feature even faster graphics scanners with up to 2x the speed of the 2010-2011 models. More speed is great for rendering larger or more complex graphics smoothly. Road Ready Skywriter’s front panel flips down allowing laser technicians to easily perform critical alignments and field service while on the road with nothing more than an allen key set. Loaded With Features From filtered air intakes to an integrated SD card reader and beyond. X-Laser’s 2012 Skywriters are ready to meet virtually any task wherever it may be. Features• 2x Scanner Speed: 2012
1.5 Watt Viasho laser with psu
Powerfull 1.5 Watt 532nm green laser from Viasho. Doing 1.8W) Used approx 35 hours Lid of the PSU has been removed for better coolanse. buildt inside an DIY projector. TTL and analog modulation TEM00 When shipped. It will be well packed. With tracking no
S3 Spyder Arctic V1 1 Watt BLUE pen laser + Expanded lens kit + Safety glasses
Lightly used. Like new Spyder S3 Laser kit, working. Includes: 1) Arctic Spyder S3 Laser(Version 1. Simple on/ off switch) 1) Pair of safety glasses(DO NOT USE WITHOUT SAFETY GLASSES) 1) Case with cleaning cloth for glasses(1) 18650 Charger(1) Pack of 8 lenses(7 in box. One attached) 1) 18650 Battery(Battery not guaranteed. New 18650 batteries are less than $10) Seller is not responsible for use or misuse of this item. Use common sense and safety gear at all times. Severe legal consequences exist if misused. Check your local laws and ordinances to verify legality before ordering. Package must be signed for by an adult 21 or over. No exceptions.
Refurbished 1100mw Osram 450nm Blue Burning Laser Kit (assembled) "445nm 1 watt"
Avoid exposure to heavy rain- minimally water resistant. Tested 30min total to ensure proper working order. Due to the nature of the device(how easily parts are removed or altered out of the range of working specifications) No returns are accepted. This is not a toy. Must be 18 years or older to order. About: I bought this laser broken from the previous owner and I fixed it. And it is in perfect working order. I found that this laser uses an Osram PLT450B laser diode. Which is designed to have a smaller, tighter beam than the A140 and M140 laser diodes especially at long distances. The PLT450B is also able to produce more output power than the A140. Careful. I accidentally vaporized the white paint on my living room wall. Assembly: Keeping the customer in mind. I have already done all the wiring. Ebay won't allow me to list it fully assembled, ... moreso this is a listing for a kit to assemble. It is currently assembled, but if you would like me to disassemble it, please tell me when you order this item. Always assemble it in the following order- keeping the wires from twisting around each other. Screw in the: driver pill to the battery tube, the heatsink tube to the battery tube, and then the retaining ring. These steps are shown visually in the pictures above. Device Operation: Laser driver set to 1.25A. Laser estimated to produce no less than 1100mw and no more than 1200mw of output power. The device operates on 2x 16340 batteries(8.2 volts) Using 1x 18650 battery will cause the laser to operate at about 150mw. Batteries only ship domestic(US 48) Not legal to ship the batteries to APO, FPO, and DPO locations and internationally. Package Contains Lithium-ion Batteries(no lithium metal) Always insert batteries into the charger in the right direction; backwards insertion can ruin batteries. Laser Safety: This is a Class IV laser product and can cause macular degeneration if you even just stare at the dot for a long period of time. The reflections off a wall can hit your eyes like a thousand 1mw laser pointers.