In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
89.00
Buy It Now
Free Shipping
Condition: New
Location: United States
1x 1W or 2.5W or 5.5W 450nm engraving laser module. ♞【Easy to Engrave & Assemble】Wavelength: 450nm; Input: DC 12V,1-3A; Power adjustable: Support PWM ... moremodulation;. Wave length: 450nm. Power: 1W 2.5W 5.5W.
$
69.99
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
With air assist, when performing laser cutting operations, the air assist system blows air through the air nozzle to remove dust and debris to improve ... morecutting performance and reduce burn marks, and can also prevent the dust and debris generated during the cutting process from contaminating the optical lens and lens surface, thereby increasing the service life of the lens.
$
249.95
Buy It Now
Free Shipping
Condition: New
Location: Southwick, United States
Custom Build Your Own Pointer Kit. The kit is fully modular and easy to assemble and disassemble. This is NOT A TOY and should be treated with respect. ... moreNever aim the beam at any living creature, aircraft, another person's property or anything you shouldn't!
$
97.64
Buy It Now
Free Shipping
Condition: New
Location: China
1pc 520nm 1000mW Dot Laser Module. Output power: 1W. Spot Mode: Green spot light. Optical system: optical coated glass lens. Wavelength range: visible ... morelight. Service life:≥8000H. Wire length:50cm (note optional wire length).
$
42.60
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
LASER TREE 40W 20W Laser Head 450nm Blue Light TTL PWM Module for Laser Engraver. Wavelength: 450nm. Upgraded Magnetic eye protective cover, easy to remove ... moreand install. suitable for DIY engraving and cutting machine.
$
53.89
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 450nm. Output power: 1W / 1.6W / 2.5W / 4W. Burnt material. Dot pattern: dot. Lens: K9 glass lens. Optical components: focusing lens.
$
119.59
Buy It Now
Free Shipping
Condition: New
Location: Hainesport, United States
Optical power:10W. Air assist system: When performing laser cutting jobs, an air assist system blows air through the air nozzle, enhancing the cutting ... moreperformance and reducing the burn marks. Blue laser module---a professional laser head with high speed and high stability.
$
44.65
Buy It Now
$4.00 Shipping
Condition: New
Location: China
Modulation: TTL+ Analog. 1pc RGB 1W laser module. Luminous form: white light fine beam. Optical system: optical coated glass lens. Working temperature: ... more-10~50℃. Service life: ≥ 8000H.
$
63.23
Buy It Now
Free Shipping
Condition: New
Location: China
1pc 445~450nm 1000mW /1W Blue Laser Module. Output wavelength:450nm/±10nm. Output power:
$
54.05
Buy It Now
Free Shipping
Condition: New
Location: China
Output power: 1000mW. 1pc Industrial 850nm 1W 1000mW IR Laser Diode Dot Module 12V UV curing. Structure features: laser tube + lens + cooling shell. Reverse ... moreconnection protection: with automatic identification of positive and negative polarity.
$
50.66
Buy It Now
$4.00 Shipping
Condition: New
Location: China
450nm 1W Blue Dot Laser Diode Module Fan Cool +12V Adapter. Wavelength: 450nm. 1x 450nm 1W Dot Laser Module. Output power: 1000mW. Burnt material. Laser ... moreshape:Dot. 1x 12V Adapter. Laser size: 33x55mm.
$
41.29
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
Laser TreeK30 is a real 30W+ output laser module designed for powerful cutting. It uses beam compression technology, built-in 6pcs 5.5W laser diodes. ... moreThe adapter board is used for electrical compatibility (suitable for Z aitu,O tur,Tw Trees,S ulpful9, Xtool, A omstack and other models of DIY laser engraving machines).
$
43.61
Buy It Now
$6.00 Shipping
Condition: New
Location: China
850nm 1W IR Focusable Dot Laser Diode Module + Fan + Driver TTL +Adapter. Output power: 1000mW. Note: 850nm high power modules can only be seen a weak ... morered light. Wavelength: 850nm. Modulation : Adujstable TTL modulation.
$
149.00
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
Effect power output: 80W. - Designed for Laser Engraver,CNC Mill, DIY Engraving and Cutting. 1 80W laser module with air assist nozzle and lens. - Engravable ... moreMaterials: MDF, Balsa, Paper, Wood, Fabric, Plastic, Leather, Plywood, Foam Paper, Anodized Aluminum, Stainless Steel, Ceramics, Bone, Coated glass, Black acrylic, Stone, Bamboo, Rubber, Leather, etc.
$
319.00
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
K1 Mini Laser Engraver Cutter 10W Higher Accuracy Laser Engraving Machine DIY. Laser Optical Power: 10W. Optical Power:10W (±1W). Laser Engraving Machine. ... moreLaser Module. Application: Engraving & Cutting.
$
272.99
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
It uses beam compression technology to combine six 5.5W laser diodes into a powerful laser beam with 30W+laser power. 15mm basswood plywood: 180mm/min, ... moreone pass. It uses beam compressed technology to combine 4pcs 5.5W laser diodes into a powerful laser beam with 20W+ laser power.
$
160.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a single 1W 520nm laser module using the 9mm NDG700 green laser diode. Unit is upgraded with a high thermally conductive copper module ... morefor max cooling and stability. It is prewired with a 1.8A X-Drvie bucking laser driver and comes with a G-2 glass lens. The unit is ready to be dropped into your final project. No setting current or soldering diode to driver. Just place in heatsink and connect leads to your power supply. Input voltage range is 6V-9V. Great for use with two Li-Ion's or Lipo's. Suggest two 16340/18350/18650 3.7V Li-Ion's or 3.2V Lipo's. You can also use a 6-8V 2A wall adapter or bench power supply. Here is what you get. The X-Drive is encased in the back of the model connected to the diode. Datasheet Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. Wire assignment is: Red + Black- Wavelength 520nm +/ 5nm. Input Voltage 6V-8.4V. Driver Output Current 1800mA. Driver Current Draw 1.7A +/ 0.5A. Power Output 900mW-1.1W. Driver Type Constant Current. Lens M9x0.5mm Threaded G-2 Glass Lens. Duty Cycle 120 seconds on 30 seconds off with proper heatsinking. If this is your first laser build here is a great place to start. The. I want to build a laser" Thread Check out this build 1.4W 520nm- The Hulk- MS-SSW-II Custom Direct Green Here is my testing on this diode Nichia NDG 700mW 520nm Laser Diode They look just like the 1W version. With the same off center pins. Here it is. The little brother to the 1W 520nm Diode. Pretty much the same as the 1W version other than slightly less powerful and a lower pricetag. I won't bother with a picture of the output as it looks identical to the 1W version. I was not given the datasheet but maybe someone resourceful can dig it up like we did for the 1W version. The supplier is trying to avoid a big to do like there was when the 1W ones were leaked. Apparently they have been available all along but it was the 1W ones that originally escaped into the wild. It is a 1.4A rated diode
$
100.69
Buy It Now
Free Shipping
Condition: New
Location: China
SS Pocket Laser Pointer 450nm Blue Laser Pointer Torch + Eye Protection Goggles. • Wavelength: 450nm. 4x 230W 7R Moving Head Light Beam Clear Rain Cover ... moreDj Disco Night Club Rain Coat. 1 x Powerful Laser Flashlight.
$
58.87
Buy It Now
Free Shipping
Condition: New
Location: China
1pc 500mW/1000mW RGB Laser Module. Full color white light laser lamp 2 wavelengths :638nm, 520nm, 450nm 3. Pupil output power :500mw/1W 4. spot mode: ... moreDot 5. output bands :visible light 6. optical systems:Focusing lenses 7.
$
51.39
Buy It Now
$4.00 Shipping
Condition: New
Location: China
(450nm 1000mW Blue Dot Laser Diode Module + 12V Adapter. 1x 450nm 1W dot module. Cow horn, leather wallet), like leather chapter, photosensitive chapter, ... moreprinting paper (mainly for carving, can cut the material is relatively small): sponge paper and other easy to burn materials.
$
131.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Nichia NDG7475 1W 520nm Laser Diode. So next I decided to put the NDG7475 head to head with the NDB7875 @ 25 Feet they were both about 23mm with a G-2. ... moreHere is what you get. I expected this thing to dim maybe around 2.5A but it just kept going.
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: United States
1x 10000mW 10W Module with cable. Power: 15W. 1x 15000mW 15W Module with cable. Option (with 1W / 2.5W / 5.5W / 10W laser module). Power: 10W. How to ... moredecrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.
$
194.73
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
Protect your yourself from the laser when you operate on it. We will try our best to solve your problem as soon as possible. We cherish your suggestions ... morevery much. We are always ready and will try our best to help you!
$
112.37
Buy It Now
$10.00 Shipping
Condition: New
Location: China
1pc 520nm 1000mW DOT Laser Module. Working Mode: CW (Continuous) TTL. Laser diode power: 1.1W. Laser Curtain 2. Laser Demonstration 4. Spectral Analysis ... more5. Laser Pointing 6. Laser Engraving.
$
55.46
Buy It Now
Free Shipping
Condition: New
Location: China
For green laser pump.This Infrared laser diode is an industrial electronic component. and protect your eyes before laser ray. Be sure the operator has ... moreexperience in optics DIY or testing. Only for professionals.
$
49.17
Buy It Now
Free Shipping
Condition: New
Location: China
Spot shape:Dot(rectangle). Lens Material:PVC Focus Lens. Optical portion:Focus Lens. Material:Aerospace aluminum.
$
42.51
Buy It Now
Free Shipping
Condition: New
Location: China
5pcs 850nm 1W 2V beauty-specific mole removal laser module. Output power: 1W. Laser wavelength: 850-860nm. Lead length: 98mm. Storage temperature: - 40°C ... moreto 80°C.
$
299.00
2d 14h 19m 42s
0 bids
Free Shipping
Condition: New
Location: Hainesport, United States
【4 Beam compression technology, 20W ultra-strong optical power laser module】. Laser Diode:4 Beam. 【Excellent heat dissipation design, keep stable cutting ... moreability and extend service life】. With cross laser positioning, easy connection, you can see where the laser is located.
$
425.00
Buy It Now
Free Shipping
Condition: Used
Location: Sacramento, United States
Retired from a multline argon laser system that produced ~150mW.
$
99.99
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 980nm. Power output: 1000mW. Working Mode: TTL 0~5V 1Hz-100KHz. 3, Good cooling, with TTL. Diode is high quality. 4, The output beam is IR ... morebeam. Laser Shape:Dot(Rectangular). Module Size: 33.5mmx33.5mmx80mm.
$
136.99
Buy It Now
Free Shipping
Condition: New
Location: China
Effect output power: 80W. You can peform engraving without wearing laser goggles for convenience. High Power Laser Module--- 2-Beam compression technology, ... more10W optical power laser module. When cutting with this laser head, the air assit system will blow air through the air nozzle.
$
299.06
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
LASERTREE K1 Mini 10W Laser Cutting & Engraving Machine. Laser Optical Power: 10W. Most popular 10W laser module for cutting & engraving. Optical Power:10W ... more(±1W). Laser Engraving Machine. Application: Engraving & Cutting.
$
52.00
Buy It Now
Free Shipping
Condition: New
Location: China
Focusable: YES. Output Power: 1000mW. 1pc 850nm 1000mW Laser Dot Module. Wavelength: 850nm. High power 850nm module is IR lasers which can only be seen ... morea weak red light.It's normal. Modulation frequency: Adujstable TTL.
$
38.59
Buy It Now
$6.00 Shipping
Condition: New
Location: China
Output power: 1000mW. 850nm 1W IR Focusable Dot Laser Diode Module + Fan + Driver TTL +Adapter. Note: 850nm high power modules can only be seen a weak ... morered light. Wavelength: 850nm. Modulation : Adujstable TTL modulation.
$
129.60
Buy It Now
$4.00 Shipping
Condition: New
Location: China
Wavelength: 520nm. Otherwise, permanent blindness may occur at your own risk! It can also be used to drive away birds.
$
54.63
Buy It Now
$4.00 Shipping
Condition: New
Location: China
Wavelength: 638nm. 1 set 638nm 1w Laser Diode Module. Spot mode: red light fat beam. Band range: visible light. Output power: 1w.
$
45.99
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 850nm. 1pc Focusable 850nm 1W 1000mw IR Infrared Diode Laser Dot Module. Laser shape:Dot(rectangular to oval). Laser head size: 50mmx33mmx33mm. ... more1pc 12V Adapter. Reverse polarity protection: with automatically identify the positive and negative.
$
13.99
Buy It Now
Free Shipping
Condition: New
Location: China
Note: Default power is 500mW. Output Current: Max 4A. Wavelength: 405/445/450 Violet Blue. Power: 500mW-1W-2W-3W-4.5W.
$
105.79
Buy It Now
Free Shipping
Condition: New
Location: China
• Wavelength: 450nm. 1 x Powerful Laser Flashlight. This laser pointer can be used for presentation, teaching indicator and more. • Beam style: continuous ... moreline. Use your laser pointer to point at any desired targets on projection screen, video.
$
139.99
Buy It Now
Free Shipping
Condition: New
Location: China
1 X TTL Signal 638nm 1000mW/1W Red laser module. 7,TTL Signal:Yes,Low level(0V):OFF,High level(5V):ON;. 8, TTL:Yes, White cable at + and Blue cable at ... more-;. 13,Size:Laser Module:90 40 40mm;. 14,Life of Laser module:>5000 hours.
$
55.58
Buy It Now
$4.00 Shipping
Condition: New
Location: China
1pc 808nm 500mw/ 850nm 1w laser module. The laser interface has three pins. If you don't connect the signal directly to 12V+and GND, you can emit light! ... moreThere is no need to connect the signal again.
$
47.87
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 638nm. 1pc 638nm 1000mW laser DOT Module. Output power: 1w. Spot mode: red dot shaped spot. Line length: 50cm.
$
149.47
Buy It Now
Free Shipping
Condition: New
Location: China
Compatible with 10W optical power laser module for CNC 3018 Machine. Optical Power 10W (±1W). The optical power of laser module is 10W+. It has 0.08mm ... moresharp compressed focal point and 0.01mm engraving accuracy.
$
217.48
Buy It Now
Free Shipping
Condition: New
Location: United States
Duty Cycle: 2 hours on, 1 hours off. Yello wire=PWM+, white wire=PWM-(3-4pin wire). this one can only engraving on dark color paper. Style: Laser. Operation ... moreMode: Automatic. Manufacturer: shanghai zhuo long dian zi you xian gong si.
$
40.47
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 638nm. Spot pattern: red spot spot. Optical system: optical coated glass lens. Note: with driver board. Output power: 1W. Line length: 50cm.
$
61.00
Buy It Now
Free Shipping
Condition: New
Location: Saint Louis, United States
Listing is for a brand new single Oclaro 700m W 638nm laser diode in a copper 12mm module with leads and G-2 lens. The 405-G-2 lens has been tested to ... moregive about around a 30% increase over the Aixiz three element glass lens. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Oclaro HL63193 638nm 700mw Diode. Save yourself the headache of pressing and soldering. Just add heatsink and driver. The current must be limited the diode.1100mA max suggested) Don't attempt to connect directly to a battery or you will damage this diode. This is the diode that everyone has been talking about. Modules are fully tested to be in working order and the leads will have the ends twisted and soldered together for ESD protection. Please use all ESD precautions and short your driver leads discharging any capacitors before hooking up your driver to this module. Data Sheet Here is what you get. A single brand new module with leads including a case lead if you need it. Wire assignment is: Red + Black- White Case Please note These are multi-mode display diodes similar to the 1W+ 445nm diodes. Check these threads for info on output and beam correction. Here are some more threads about these diodes. Running off my bench power supply and encased in a finned heatsink. Check out these awesome shots. Finned heatsink not included) Oclaro 700mW 638nm Diode(HL63193MG) First thing I did was to compare the divergence to a Mitsubishi ML520G71 diode both using a standard G-2 glass lens. While it is a fraction smaller when I actually measured it they are nearly the same but the new Oclaro has less light concentrated in the wings and splash and of course 400mW more power. So with that said lets get on with the power test with a G-2 lens. So there we have it the Oclaro 700mW 638nm diode. Hopefully this helps bring this diode into perspective. If this is your first laser build her
$
50.83
Buy It Now
Free Shipping
Condition: New
Location: China
25x60mm Adjustable 450nm 1000mw 1W Dot Wood Carving Laser Diode Module with OD3+ 400nm 450nm safe glasses. 1pc 450nm 1000mw 25x60mm adjustable laser light ... moremodule for carving / engraving ( dot ). Wavelength: 450nm.
$
34.00
Buy It Now
$4.00 Shipping
Condition: New
Location: China
850nm 1W Infrared IR Focusable Dot Diode Laser Module + Fan Cooling + Driver TTL. 1x 850nm 1000mW Infrared IR Dot Laser Diode Module. Note: 850nm high ... morepower module is IR lasers which can only be seen a weak red light.It's normal.
$
79.80
Buy It Now
$1.50 Shipping
Condition: New
Location: China
Wavelength(nm): 520nm(Green). Modulation: TTL Modulation (0V on and 5V off). Laser Shape: Dot. Input current: 2A. Output power(mw): 1000mW.
$
66.49
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength 450nm. 445nm 1W/1000mW focusable blue laser module. SS Pocket Laser Pointer 450nm Blue Laser Pointer Torch + Eye Protection Goggles. Power ... moreoutput: 1W(1000mW). 4x 230W 7R Moving Head Light Beam Clear Rain Cover Dj Disco Night Club Rain Coat.
$
356.18
Buy It Now
$10.00 Shipping
Condition: New
Location: China
Laser wavelength: 520nm. 1pc 520nm 1000mW 12V High Power Head Moving GreenLaser Module. The joint between the base and the laser can be moved to change ... morethe irradiation angle of the laser lamp. Laser current: 1.6A.
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: China
Laser TreeK30 is a real 30W+ output laser module designed for powerful cutting. It uses beam compression technology, built-in 6pcs 5.5W laser diodes. ... moreThe adapter board is used for electrical compatibility (suitable for Z aitu,O tur,Tw Trees,S ulpful9, Xtool, A omstack and other models of DIY laser engraving machines).
$
54.28
Buy It Now
Free Shipping
Condition: New
Location: China
Spot Mode: Circular Dot. Input stability: ±5%. Wavelength: Red 638nm Green 520nm Blue 445nm. Life span: 10000h. Output power: R:300mW, G:80mW, B:800mW. ... moreRated power consumption: 14W.
$
13.99
Buy It Now
$3.00 Shipping
Condition: New
Location: China
5,TTL Signal:0~5V;. Could to protect your laser module,work for long hours,it's very good choice;. 4,DC 12V input;. This driver used a high-cost high-quality ... moreIC, more stable and to protect the laser diode.
$
36.90
Buy It Now
$4.00 Shipping
Condition: New
Location: China
1pc 850nm 1000mW Laser Dot Module. Modulation frequency:TTL modulation. Laser head size: 69.5mmx30mmx30mm (including fans). Laser Shape:Dot. Storage temperature: ... more-10 ℃ ~ +40 ℃.
$
52.40
Buy It Now
Free Shipping
Condition: New
Location: China
Wavelength: 450nm. Output power: 1000mW. 1pcs High-Power 450nm 1000mW 1W Pure Blue Laser Dot Module. Aluminum alloy shell + imported laser diode + K9 ... moreglass lens + constant current drive board. Spot mode: Dot.
$
122.52
Buy It Now
$4.00 Shipping
Condition: New
Location: China
1pc 520nm 1000mw fat beam laser module.
$
10.52
Buy It Now
$2.00 Shipping
Condition: New
Location: China
Suitable for 405nm 445nm 450nm 520nm laser diode. 1xHigh Power 405nm 450nm 520nm 1w 1.6w 2w Blue Green Laser Module 12V Laser Diode Driver. Buck circuit, ... moreconstant current output (output current and output power adjustable);.
$
299.06
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
Laser Engraver With 10W Laser Module Engraving Cutting Machine 450nm Blue Light CNC Machine. Laser Optical Power: 10W. Optical Power:10W (±1W). Laser ... moreengraving machine. Application: Engraving & Cutting.
$
115.00
Buy It Now
$16.27 Shipping
Condition: New
Location: 江夏区, China
1 450nm Laser Module. It can be continuously lit for 8 hours at a constant temperature (25 °C).
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
VIASHO 1W 532NM GREEN DPSS LASER SYSTEM - STABLE BEAM BUT LOW OUTPUT POWER
I removed this 1W Viasho 532nm laser from my projector because the output power is low. Power output is around 400mW and the beam is stable. But I suspect there is a problem with the pump diode, KTP crystal, or the alignment(I have not opened the laser head to investigate) Maybe you know how to repair these, or maybe you just need a replacement driver(the driver is working perfectly) The auction includes the laser head, laser driver, and the power supply, so it's ready to plug-in and use. The driver has selectable TTL- TTL+, and analog modulation. It's currently set to TTL- so the laser turns on automatically without any input, but you would probably want to select analog modulation for use in your projector. If you have any questions, please ask me. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13d9c6e06c2-0xef-
Fuji Dart 1w Laser Diode CTP Computer to plate Platesetter
Laser diode for Fuji Dart CTP engine. 1w. Ma level over 400. Please call with any questions. 201) 410-3537. Dealer pricing also discounted. Please call or email. LOWEST PRICE ON THE INTERNET.
Wicked Lasers Krypton Spyder III Green 1W Hand-Held Laser
Wicked Lasers' Spyder III Krypton Series 1 Watt Green Laser Pointer with All Accessories Seven(7) Special Effect Lenses Battery Charger& 2 New Spare Batteries Ballistic Nylon Case Free Shipping by Priority Mail!
Screen Platerite 1w Laser Diode CTP Computer to plate 4100, 4000, 4300, 8000
Laser diode for Screen Platerite CTP engine. 1w. 4100. 4000, 4300, 8100, 8000, 8300 Ma level over 400. Please call with any questions. 201) 410-3537. Dealer pricing also discounted. Please call or email. LOWEST PRICE ON THE INTERNET.
Fuji Javelin CTP Platesetter - Laser Diode, 1W Can
Fuji Javelin CTP Platesetter- Laser Diode. 1W Can- U1150073- This is a re-certified used Part. Every Part is inspected. Cleaned, installed and tested with imaging verification. Order through ifix.com and we'll include a 6 month warranty on any of our parts. Including diodes. If for any reason you are not happy with its performance. We will exchange it or refund your money. The image shown is a generic image and representation of the product for sale. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for dealers. ... moreService representatives and end users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com. Company Background iFix.com. Inc. was founded by Rick Littrell. A 30-year veteran of the print and electronic imaging industry. As a former worldwide Product Line Manager for platesetting solutions at a major imaging equipment and media supplier, Rick spent years visiting customers throughout the world and saw firsthand, the need for a reliable and economical imaging system parts supplier to the graphics industry. Getting the right parts. On time and for the right price helps Rick’s customers operate at full capacity and extend the life of their platesetting and imagesetting equipment. Since its inception in January of 2008. IFix.com has built a successful bus
AGFA Avalon N8 CTP Platesetter - Laser Diode, 1W Can
AGFA Avalon N8 CTP Platesetter- Laser Diode. 1W Can- U1150073-This is a re-certified used Part. Every Part is inspected. Cleaned, installed and tested with imaging verification. Order through ifix.com and we'll include a 6 month warranty on everything. Including diodes. If for any reason you are not happy with its performance. We will exchange it or refund your money. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for dealers. Service representatives and end users around the world. And now we look forward to ... moreserving your parts requirements. If you are servicing an Agfa. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com. Company Background iFix.com. Inc. was founded by Rick Littrell. A 30-year veteran of the print and electronic imaging industry. As a former worldwide Product Line Manager for platesetting solutions at a major imaging equipment and media supplier, Rick spent years visiting customers throughout the world and saw firsthand, the need for a reliable and economical imaging system parts supplier to the graphics industry. Getting the right parts. On time and for the right price helps Rick’s customers operate at full capacity and extend the life of their platesetting and imagesetting equipment. Since its inception in January of 2008. IFix.com has built a successful business based on a single founding principal: delivering quality parts reliably at an
AGFA Avalon N4 CTP Platesetter - Laser Diode, 1W Can
AGFA Avalon N4 CTP Platesetter- Laser Diode. 1W Can- This is a re-certified used Part. Every Part is inspected. Cleaned, installed and tested with imaging verification. Order this or any item through ifix.com and we'll include a 6 month warranty on any parts. Including diodes. If for any reason you are not happy with its performance. We will exchange it or refund your money. The image shown is a generic image and representation of the product for sale. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for dealers. ... moreService representatives and end users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com. Company Background iFix.com. Inc. was founded by Rick Littrell. A 30-year veteran of the print and electronic imaging industry. As a former worldwide Product Line Manager for platesetting solutions at a major imaging equipment and media supplier, Rick spent years visiting customers throughout the world and saw firsthand, the need for a reliable and economical imaging system parts supplier to the graphics industry. Getting the right parts. On time and for the right price helps Rick’s customers operate at full capacity and extend the life of their platesetting and imagesetting equipment. Since its inception in January of 2008. IFix.com has built a successful bu
405nm 1000mW 1W 1 Watt Laser Diode Module with 405-G2 Lens Opnext HL40023MG
1000mW(1 Watt! 405nm Violet Laser Diode Module Here is a laser diode assembly removed from low hour prototype equipment which houses a very high power 405nm ultraviolet laser diode. This diode has similar specifications to the Opnext HL40023MG which is rated to produce 400-500mW and is easily overdriven to 1000mW or more. We've individually tested these and guarantee that they will produce 1000mW at around 750mA. Please note that like all laser diodes. These are sensitive to static, overcurrent, reverse voltage and back reflections. Our warranty does not cover diodes damaged due to misuse. Specifications: Output Power: 400-500mW(rated) 1000mW(tested) Wavelength: 405nm +/ 5nm. Threshold Current: 160mA. Operating Current(400mW) Operating Current(1000mW) Operating Voltage: Package: 5.6mm can. Isolated leads. Thorlabs sells the Opnext HL40023MG ... morefor over $1600 each new! Click for more information and a complete spec sheet from the Thorlabs web site. These diodes have 2 leads rather than 3 as shown on the spec sheet. But otherwise have the same specifications. The module is easily disassembled to extract the laser diode and a very nice 6.3mm aspheric collimating lens AR coated for extremely low loss at 405nm. This lens performs similarly to the popular 405-G2 lens. Here I've got a module with the extra optics removed leaving just the collimated laser diode. The laser diode is pressed into a copper heat sink. It can be pressed out with the appropriate tool. See our other auctions for brand new. Bare laser diodes. To see other related items. Be sure to Visit my eBay Store If you like what you see. You can Add Junktronix to your Favorite Sellers List Why Buy From Junktronix? eBay member in good standing since 1996 We specialize in lasers and photonic test equipment and have developed expertise and tools to properly test most of the items we sell All items offered with a 100% Satisfaction Guarantee Payment We always accept payment by PayPal. If your organization does not allow PayPal. Please contact us to arran
Fuji Dart CTP Platesetter Laser Diode, 1W Can U1150073
Fuji Dart CTP Platesetter Laser Diode. 1W Can U1150073- This is a re-certified used Part. Every Part is inspected. Cleaned, installed and tested with imaging verification. Order through ifix.com and we'll include a 6 month warranty on any of our parts. Including diodes. If for any reason you are not happy with its performance. We will exchange it or refund your money. The image shown is a generic image and representation of the product for sale. www.ifix.com The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for ... moredealers. Service representatives and end users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com. Company Background iFix.com. Inc. was founded by Rick Littrell. A 30-year veteran of the print and electronic imaging industry. As a former worldwide Product Line Manager for platesetting solutions at a major imaging equipment and media supplier, Rick spent years visiting customers throughout the world and saw firsthand, the need for a reliable and economical imaging system parts supplier to the graphics industry. Getting the right parts. On time and for the right price helps Rick’s customers operate at full capacity and extend the life of their platesetting and imagesetting equipment. Since its inception in January of 2008. IFix.com has built a successf
445nm 1W Blu Laser Diode/Cut Pin/5.6mm TO18/DIY/Test
Main Features: Wavelength length:445nm. Power Output: CW 1000mW. Working Current: I. Working Voltage: 3.0V-5.0V. Sealed Size: TO18(5.6mm) Note before buying: This diode is extracted from laser sleds. Laser diode is kind of special sensitive optical compoents. Please be sure opertor has enough DIY and electronics experience. Actual view of the PIN: Attention 1.Laser beam is harm for eyes during process please avoid any directly see on the aperture. 2.Please use the suitable LD power driver. Instant reverse current can not exceed than 25uA. Reverse voltage cannot exceed than 2V.Otherwise the LD will be damaged. 3.Please install the LD well before connecting to the power.The initial input voltage should be zero. 4.To increase/ decrease the current gradually for avoiding any current pulse which will damage the LD. 5.Please store or use the LD ... moreunder dry and air flow ambient.To avoid any situation of condensation which will damage the LD. 6.Working under high temperature will increase the threshold current and decrease the efficiency conversion.Speed up the aging of the LD. 7.The exceed power output will speed up the aging of the LD. 8.To use the LD with enough head dispensing or uner the cooling ambient. 9.Laser diode belongs to electrostatic sensitive components. Should deal with anti-electrostatic method. To touch the LD directly unless humanbody is well connect with ground. Otherwise the LD will be burned easily. To wear anti-eletrostatic wrist band is necessary. Remark:1pcs in selling under this list.Thanks! Statement of Deal Quality Warranty All items are 100% new& never used.sometimes we may open the package to double check their quality before shipping. Electronic/Optical parts are fragile but for all items we would offer 3 month quality warranty. In this period we would exchange for any defective parts. Buyer and seller bear their shipping fee separately. Bid or Buy Return for Exchange If you place bid/order and win it means you enter into a legally binding contract to purchase the item and agree all ter
Coherent 201 Laser Power / Energy Meter 300nm-30um / 1W-100W / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Coherent 201 Laser Power/ Energy Meter 300nm-30um/ 1W-100W/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Coherent 201 Laser Power/ Energy Meter 300nm-30um/ 1W-100W/ Warranty Used Condition Coherent Laser Power/ Energy Meter Model: 201 Serial No. 2476 Range: 300nm-30um Wavelength Power Range: 1. 3, 10, 30& 100 Watt With Stand/ BNC Connector Cable/ AC Power Cord INV# 20C71349-12-12 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary ... morefrom the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is
Green Laser (1W) DPSS 532 nm
The HeNe laser(GXP-1000) is approximately 5 years old and has been gently used(used approximately 20 times. For less than 1 hour each sitting) The collimated beam expander creates a uniform intensity beam upto 20X of the original beam size. Two full rotations of the focus knurl provide smooth movement for the optics in order to vary the output from collimated to the minimum focus distance of 1.2 meters. Items are being sold as is, so please ask any questions before purchasing.
1W RGB ILDA Animation Laser - SHINP AL-980RGB - 500mW Red 300 BluemW 100mW Green
Selling used ~1W RGB TTL Animation Laser- SHINP: AL-980RGB- Cheap looking for quick sale Red 500mW 650nm- Green 100mW 532nm- Blue 300mW 445nm Lasers work 100% Approx. 100-200 hours used) Motors& dials all work perfectly Automatic(Both Pattern& Image) + Sound Active mode work perfectly fine Fully working except a few minor problems(Dip Switch& DMX control problems) Problem 1) When all dip switches off laser is always on sound active mode and fully on(However on/off switch still turns everything off/on) Problem 2) DMX mode does not work- Changes unable to be read by the board? Able to blackout and turn laser off in DMX(Note: Unable to try ILDA control as software already sold) Video of automatic(pattern& image) as well sound active mode working below: Specs of AL-980RGB: Taken directly from the manual) 1. Voltage: AC100V-240V/ ... more50HZ/60HZ/ Fuse 2A/250V. 2. Rated Power: 50W. 3. Scanner: High-speed optical scanner. Big angle scanning. 4. Laser: 100mW 532nm wavelength green laser. TE-cooled. 500mW 650nm wavelength red laser. TE-cooled. 300mW 445nm wavelength blue laser. TE-cooled. 5. Working Modes: Sound Active. AUTO-Beam, AUTO-Animation, DMX512(14 CH) Universal DMX Operation(DMX mode) Master/Slave. PC Control. 6. Graphics& Effects: 256/128 beam show and animated graphics show patterns. 7. Interface: 3 pins XLR jack for DMX or Maser-Slave linking. Laser comes with power cord. Manual& metal hanger for truss. Will be tightly packed and shipped within 1-2 days of sale. Perfect for laser enthusiasts, someone looking for parts or want a cheap professional laser to do a quick fix up. Let me know if you have any questions.
Green Laser DPSS 532 nm 1000 mW (1W) GXP-1000
The laser(GXP-1000) is a diode-pumped solid state laser(532 nm) and is approximately 5 years old. It was purchased from"Extreme Lasers" and has been gently used(used approximately 20 times. For less than 1 hour each sitting) Items are being sold as is, so please ask any questions before purchasing. Below are the specs for the laser. Output Power: 1000 mW Wavelength: 532 nm Beam Diameter(1/e2) ~2mm Beam Divergence: Beam Quality(M2) Cooling Means: Thermo Electric Cooling(TEC) Dimensions(Head) 130x77x60mm Dimensions(PSU) 245x152x113 mm Expected Lifetime: 8000 hrs Frequency: 1-10 kHz(optional up to 50 kHz) Linewidth: Operating Current: Operating Temperature: 10-35oC Operating Voltage: 110 VAC. 50-60 Hz Output Mode: CW or Modulation(TTL) Pointing Drift: Stability: +/ 2% at 4 hrs Transverse Mode: TEMoo Warm-up time:
SYNRAD Carbon Dioxide Laser model J48-1W
I just sell this eqipment as the picture is shown. This device is out of order and not working. I do not know how to operate detail. I just sell it as shown in the picture. Anyone who want to buy should take into careful consideration about it before making decision. I do not know how to handle it. I sell it for repair or parts purpose. I DO NOT ACCEPT RETURN. Thank you. God bless you. shipping- The shipping company is EMS. I send my item by using this company. The delivery is performed by every post office of each country. If you order the item. Then I pack the product right away and let you know the tracking number. search- track-trace.com/post
Coherent Compass 501QM-VD-ES 532nm Green Laser 4.1W plus!! Show, engraving, lab
Coherent 501QM-VD-ES This is one. Of only a handful of lasers I know of, that was modified by Coherent for an aerospace company. These units typically put out 3 watts, max. This one is currently doing 4W's of 532nm green output. I just replaced the pump diode with a brand new 18W unit. It comes stock with either a 9 or 12W depending on options selected. Those of you who know this unit will also know how to turn the current up to reach the 5-6 watts its capable of without any additional hardware. Runs in CW mode or q-switched to 80khz. Everything was just gone through by Coherent. Heat sink added to head, optics and components re-aligned and replaced as necessary. If you're looking for a laser for show use, in the lab, or for marking/engraving, I doubt you will find a better one at this price point. It's basically new at this point. ... moreThe diode has about 30min of use for testing and pictures. That's it. Only 1 of 5 lasers in existence! Includes: power supply/control unit. Laser head, armored AR coated fiber, q-switch cable, interface cable from head to supply, power cord, lock key. Ready to go right out of the box, you need nothing else to get it to work. I will guarantee the laser for 14 days after receipt to not be doa or broke, contingent upon not opening the unit or modifying the output current or any other option. It must be returned in the same exact condition it was sent in, and no returns for buyers remorse or wive's/husband's being upset! But this wont be an issue since it is as described.
New Wave Research 1W Q-Switched 532nm green DPSS laser head
Prototype laser head from New Wave Research- we received this item and are unable to fully test it due to the lack of a matching power supply; driving the pump diode with a power supply resulted in a pink glow. But no output at 532nm. All optical surfaces are in good condition.
Screen Platerite 1w Laser Diode CTP Computer to plate Platesetter
Laser diode for Screen Platerite 4000/ 4100/ 4300/ 8000/ 8100/ 8300 CTP engine. 1w. Ma level over 400. Please call with any questions. 201) 410-3537. Dealer pricing also discounted. Please call or email. LOWEST PRICE ON THE INTERNET.
High Power 1W Blue 447nm Industrial Dye Laser Burning Pump Diode Module & 3V PSU
This is a high power blue laser diode module made to pump a small low power tunable dye laser. The laser output is about 1w at 447nm. The laser draws about 2.5A at 3V. The lens is adjustable from a pinpoint burning spot to a fairly well collimated beam that can travel for miles. This laser module must be cooled with a heatsink for constant use. The power output is enough to set lots of stuff on fire. So I am sure you can only imagine what it would do to your eyes if you look in the beam. Needless to say, eye protection is highly recommended with this laser! BE CAREFUL with this item, I will not be held responsible for misuse or careless use of this item! This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
Screen PTR PlateRite CTP - Laser Diode, 1W Can
Scre en PTR PlateRite CTP Platesetter- Laser Diode. 1W Can- U1150073- This is a re-certified used Part. Every Part is inspected. Cleaned, installed and tested with imaging verification. Order through ifix.com and we'll include a 6 month warranty on any of our parts. Including diodes. If for any reason you are not happy with its performance. We will exchange it or refund your money. Send in your defective diode for store credit. Contact us for details. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for dealers. ... moreService representatives and end users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. C reo/Kodak. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com.
Synrad J48-1W Carbon Dioxide Laser, 30VDC, 30 Watts Max, 10510 - 10650nm w/Key
Sinrad J841W Co2 Medical welding laser. Pulled from working Device.
High Power Coherent 980nm 1W Burning Cutting Dpss Erbium Pump Laser diode
This is a 980nm laser diode that is good for pumping erbium glass fiber lasers. Small erbium yag rods or other devices. As with any other higher power laser diode it can be used to cut and burn very thin materials, but is best suited for IR illumination, and laser pumping. This item is pretty hard to find reasonably priced. I have lots of laser and other unique stuff for sale this week.
High Power Burning Industrial Fiber Coherent Laser Diode 835nm 1W Agfa CTP Part
This is a 1W 835nm laser diode that is coupled to a ST style fiber. It is very good for IR illumination and industrial applications like cutting and engraving. These lasers are extremely hard to find. And unlike the standard bare diodes, you do not need special optics to use it, a simple focusing lens will do. Oh, you could also use this diode to repair an agfa plate setter as long as the diode it uses is less than 1W and has the ST style fiber connector. It even comes with a coupler/generder bender! I also have some 1-2W 835nm 9mm plate setter diodes listed as well. This item is pretty hard to find reasonably priced, they sell for about 500 surplus, and over a grand new from a prepress repair shop. I have lots of laser and other unique stuff for sale this week.
high power laser diode assembly peltier coolers photodiodes N2172 664nm 1W (B9)
This one's a mystery. Folks. This came from a bio-med research company that's moving to its next phase of trials and no longer needs its laser setup. We were told that this goes at 664nm with 1W output, but we can't verify that, and we're not sure if the power rating is per diode or total. We took the top off of the assembly, and found what you see in the pictures. We were worried that we'd break something if we took it apart further, so that's all we've done. We figure this is a custom unit. Maybe you know what this is and want it. Feel free to make us an offer. We're a surplus store. And we aren't experts with most of this stuff. So, we don't make any guarantees beyond what's stated in the listing& pictures. Please note that international shipping will cost more than domestic. Feel free to ... morecontact us with any questions via ebay. By giving us a call during business hours at 651.646.8653, or by visiting our St. Paul store! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1455d3f4fe9-0x110-
Synrad J48-1W CO2 Laser, 30VDC, 30 Watts Max, 10510 - 10650nm w/Key
Synrad J48-1W CO2 Laser. 30VDC, 30 Watts Max, 10510- 10650nm w/Key From our inventory. We are selling a Synrad J48-1W Carbon Dioxide Laser. 30VDC, 30 Watts Max, 10510- 10650nm w/Key. Specifications: Model# Synrad J48-1W Carbon Dioxide Laser. 30VDC, 30 Watts Max, 10510- 10650nm w/Key More Information: For Further Information Please see: Comes with Key 30VDC 30 Watts Max 10510- 10650nm Power Output Guaranteed: 10W Power Stability: ±10% Mode Quality: TEMoo Equivalent: 95% Purity Beam Diameter/ Divergence: 3.5mm/4mR Polarization: Linear-Vertical 50:1 Extinction Minimum Modulation/Rise or Fall Time: 150us. 10% 90% 5kHz PWM 20% 50% Duty Factor. 1kHz Square Wave Gate Electrical Control. Command Input: Opto-Isolated LED Input- Positive Logic- 20 kHz Max Frequency High = On = +3.5V min. +10V Max; Low = Off = +0.5V Max, 0V min 6mA Max Load@ 5V(48-1. ... more48-2) 12mA max load@ 5V(48-5) ST7-6 25 lbs D&S Machined Products focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 25 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBay’s policy. However. You can use a Credit Card through PayPal as a “one time payment”. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S M
Equine Laser Thor (LLLT) - 810nm 1W laser cluster (5 x 200mW
Analgesic 810nm 1Watt laser cluster(5 x 200mW) A Drug Free Alternative for Horses With Laser Therapy you can heal and relieve pain: Muscle. Tendon& ligament injuries Pain management from trauma& post surgical wounds Inflammation& swelling Wound healing including degloving injuries Degenerative disc disease& more When the drugs don't work Anti-inflammatory drugs do not heal. They can not be used before a competition and they often have side effects. We believe that our Cold laser therapy should replace NSAIDS as the first treatment for equine injuries. Cold Laser can be applied by vets, owners, riders and trainers and is best delivered as soon as an injury occurs. MD's and scientists have now published over 1.000 laboratory and clinical trials(RCT's) in medical journals now proving that not only can cold lasers ... moreheal soft and hard tissue, but they can also offer pain relief and rapidly resolve inflammation without side effects of drug therapies and for less cost. What is it? Laser and LED beams of light can stimulate the cells in the body that repair tissue. Reduce inflammation and transmit pain. How LLLT/ cold laser therapy works Certain wavelengths of light can stimulate or inhibit cellular function according to it's intensity and the time applied. Lasers and LED's produce intense beams of light at specific wavelengths. When the right wavelength at the right intensity is used at the correct anatomical location for the right amount of time you can stimulate repair. Resolve inflammation and reduce pain. One of the primary mechanisms is the effect of light on cytochrome c oxidase and the consequently the unbinding of nitric oxide and release of ATP leading to improved cellular function. For anti-inflammatory effects we have found a measurable reduction in PGE2. TNF Alpha and IL-6 in the synovia surrounding damaged tendons and for analgesia high intensity lasers over nerve supply can inhibit fast axonal flow. In addition. High intensity single point lasers can rel
Coherent Golden Yellow DPSS Laser KTP Crystal 593.5nm 1W+ Power Optic Part
EXTREMELY RARE ITEM VERY FEW LEFT! This is a sum frequency doubler crystal for a 0.5 to 2W 593.5nm yellow beam laser. This crystal set is specially coated for the yellow light and AR coated for 1064nm and 1.3um. With the right optics you could make a bright true yellow laser. The AR coatings on this crystal are bluish rather than the typical reddish coatings. It is amusing to watch these lasers when they are warming up. Because you get first green 532nm, than red 660nm, finally you start getting the 593.5nm. It is interesting that what is happening is the crystal is first acting as doubler, then acting as a OPO when the correct temperature is reached. This part is extremely hard to find and exotic to be sure. I have lots of lasers and other unique stuff for sale this week. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-146d1b73383-0x103-
Wicked Lasers ARC44501 1W Arctic Spyder III 3 - Blue Laser
You are bidding on a Wicked Lasers Arctic Spyder III 3- Blue Laser Item has been tested and is in working order. This item is not my personal property. So I am not knowledgeable of its' history. I ACCEPT PAYPAL I offer shipping to the United States only. SHIPS W/IN LOWER 48 STATES/ U.S. ONLY I will ship this out within 3 business days via USPS(to your verified Paypal/ Ebay confirmed address) after the payment is received. Your tracking number will be sent to you when it goes out. I always pack well and Delivery Confirmation is included. Please feel free to ask any questions you may have and good luck!
High Power Coherent Burning Fiber Laser Diode 835nm 1W Industrial Parts Lot of 2
This is a lot of two 1W 835nm laser diodes. Both diodes are useful for tests and experimentation. But have mechanical problems that prevent their use in an industrial plate setter machine: As follows; one has the pin that is tied to the case broken with a fiber that is coupled to a ST style fiber connector, this diode should have the anode directly tied to the case using a mounting screw. The other diode has the ST connector is missing, output is directly from the fiber itself. Both diodes are tested to function well electrically and optically. These are very good for IR illumination and industrial applications like cutting and engraving. These lasers are extremely hard to find, and unlike the standard bare diodes, you do not need special optics to use it, a simple focusing lens will do. I have lots of lasers and other unique stuff for sale ... morethis week.
Wicked Laser Spyder 3 1W Krypton - Collector Item - Available 48 hours only!
Hello. Thanks for checking out my listing. Please read this description fully before bidding/buying/offering. Please note that this item is now being relisted WITHOUT ACCESSORIES. The previously-included Wicked Lasers Expanded Lens Set and 10x Beam Expander will now be listed separately by request. Please note also that I will end all listings by no later than 2112h(9:12 p.m. EDT. Wednesday July 16, 2014, regardless of posted end time. What you see in the photographs is the item the winning bidder/buyer will receive(tripod/holder not included)a collector item no longer available from the manufacturer. This 1W Krypton Wicked Laser has been very lightly used(and thoroughly enjoyed! It is in excellent working and physical condition. There's only one minor surface flaw; part of the function switch is scuffed(see photo) It functions perfectly ... morehowever and is otherwise in excellent condition. Function photos demonstrate low- and high-power modes in a shaded. Day lit room. At night it lights up the whole room without need for other lighting. I am confident you will not be disappointed! That being said. It should go without saying that this is NOT A TOY but a powerful item that must be respected and operated lawfully. Safety glasses MUST be worn at all times when operating this laser! The winning bidder or buyer will receive a pair of protective glasses from Wicked Lasers for the Krypton. However, I*strongly* urge the buyer/bidder to acquire a better pair of protective glasses. Wicked Lasers protective glasses in my opinion only provide the minimal amount of protection one should wear during brief usage. One recommended American firm I trust for safety glasses is Eagle Pair. From whom I got my protective glasses and with whom I'm very satisfied. They list on eBay from time to time, and can be easily found via a Google search too. I will also include 2 extra batteries(for a total of 3) and a charger. Holster included. All items in this auction are being sold AS-IS with no warranties. Express or implied, beyon
Laserbee LB T3N 1W laser power meter
Laserbee T3N laser power meter. The readings of the LaserBee I start at 5mW and go to 1050mW. Below 5mW the LCD Display will read 0mW. Works great! Powered by a 9v battery(not included) This is the model without datalogging capability.
1000mw (1w) Custom Built, Blue Burning Laser Pointer
Custom built
AGFA Avalon N4/N8 CTP Platesetter - Laser Diode, 1W Can
AGFA Avalon N4/N8 CTP Platesetter- Laser Diode. 1W Can- U1150073-This is a re-certified used Part. Every Part is inspected. Cleaned, installed and tested with imaging verification. Order through ifix.com and we'll include a 6 month warranty on everything. Including diodes. If for any reason you are not happy with its performance. We will exchange it or refund your money. Send in your defective diode for store credit. Contact us for more details. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for dealers. Service ... morerepresentatives and end users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. Creo/Kodak. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-147fc6b854c-0x10a-
High Power 1W Blue 447nm BURNING BLUE laser module with 3V driver
High power BLUE laser module. Output: ~1W. Wavelength: 447nm. This is a high power blue laser diode module made to pump a small low power bench top tunable dye laser. The laser draws about 2.5A at 3V. The laser module is mounted in an Aixiz housing and MUST be mounted in a heatsink for more than a few seconds of operation. The lens is adjustable. As with any laser. Eye protection is a MUST. This laser is powerful enough to blind you. Seller not responsible for misuse of this item. Photos show entire assembly. And laser burning a notebook cover.
Wicked Laser Spyder 3 Artic 1W
Wicked Lasers Arctic Spyder III 3 Blue Laser. Laser works great! Very powerful. Comes with charger plus extra battery and instructions.
1W Blue Laser Diode TO-18 5.6mm 445nm in Module
Only for Professionals! Used approx 4000h. In perfect condition, all tested and working. Color output: Blue- 445nm Typ. Continuous optical output power: 1W. Operating current: 1.0A Typ. Operating voltage: 4.2V Typ. For Lens: M9x0.5mm- not included. Small package: TO-18 5.6mm Oher Information: http:www.lz4gv.com/Laser/Laser.html. Powered by The free listing tool. List your items fast and easy and manage your active items.
300mW GREEN ANIMATION ILDA DMX LASER liquid sky royal dj american chauvet rgb 1w
This auction is for a used 300mW green ILDA Laser made by CASA model“Luxury-G. It is fully tested and works great. I posted a video of me testing it. The laser in this video is the actual one in this auction: Specifications: Manufacturer’s website: 300mW green laser ILDA controllable DMX512 controllable 15KPPS wide angle Galvo scanner 150 built in patterns and animations Fan cooled for reliable continuous operation Adjustable pattern size Adjustable sound sensitivity Operating modes: Auto. Sound active, Master/Slave, DMX, ILDA Power Supply: 110V~220V. 50-60HZ Suitable for commercial Show.Disco, Pub, Bar, Clubs, Large stage, Entertainment center, Casinos, Family party etc Why buy from me? I have been selling on eBay since 2002 with happy customers who leave nothing but positive feedback. I work professionally as an Electrical Engineer. My ... morehobby is selling things on eBay. Specifically video projectors and other electronics. Rest assured that any item that I am selling has been thoroughly tested and inspected resulting in item descriptions being extremely accurate. I will not knowingly withhold information or attempt to mislead the buyer in any way. My Integrity and honesty are core values that I will not compromise on. Don’t forget to check out my other items for more video projectors. Audio gear, and electronics! If you have any questions. Please feel free to ask. I will be happy to answer them: ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14a4ad43a6b-0x102-
Screen PTR CTP Laser Diode, 1W Can, Part #U1150073-10 - 6 Months Warranty
Scre en PTR CTP Laser Diode. 1W Can- U1150073- This is a re-certified used Part. Compatible with Screen PlateRite PT-R4000. 4000-II, 4100, 4300, 8000, 8000-II, 8100, and 8300 CTP Platesetters, plus OEM equivalents. Every Part is inspected. Cleaned, installed and tested with imaging verification. Includes 6 months warranty-If for any reason you are not happy with its performance. We will exchange it or refund your money. Note: Pictures representative of diodes supplied and packaging. Actual serial number and IOPD value will vary. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained ... morea reputation as the“go-to” imaging systems parts supplier for dealers. Service representatives and end users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. C reo/Kodak. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com.
AGFA Acento/Avalon N4/N8 CTP Laser Diode, 1W Can, Part #U1150073-10
AGFA Acento/ Avalon N4/N8 CTP Platesetter- Laser Diode. 1W Can- U1150073-This is a re-certified used Part. Every Part is inspected. Cleaned, installed and tested with imaging verification. Compatible with Agfa Acento. Acento E, Acento S, Acento II E, Acento II S, Avalon N4-10E, Avalon N4-10S, Avalon N8-10E, Avalon N8-10S-Includes 6 months warranty-If for any reason you are not happy with its performance. We will exchange it or refund your money. Note: Pictures representative of diodes supplied and packaging. Actual serial number and IOPD value will vary. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast ... moreresponse iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for dealers. Service representatives and end users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. Creo/Kodak. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com.
RGB laser 1w ILDA RGB very bright and works perfectly. Stored in case.
I am selling a used 1w RGB DMX or ILDA Laser. It is in great condition and used 12 times. It has been stored in a case during its entire life when not used. The specs are listed below. I also have another one that I am selling as well that is identical. This unit also has an output for ILDA(standard din connector) so that you can daisy chain them. This laser is extremely bright and throws beams out a very far distance. It can be used in medium sized venues without a problem. I added a few pics of these being used at shows. So you can see how bright they are! Technical Specifications: Lasers: aircooled DPSS Diode Laser 500 mW/650nm(Red) wavelength red laser aircooled DPSS Diode Laser 150 mW/ 532nm(Green) wavelength green laser aircooled DPSS Diode Laser 350 mW/ 450nm(Blue) wavelength blue laser Laser protection class: 3B, beam specifications: ... more4*6mm(red) 2.5mrad? Scanner system: fast galvo system with excellent projection qualit.X/Y Scan Angle max:50° optical, Scanspeed: High-speed optical scanner 20KPPS. Big angle scanning, Safety: Design according to security and good performance. Safer to human and environ ment. Control mode: ILDA. DMX 512, sound, automatic& PC software PC laser show software: Pangolin,Phoenix, iSHOW and etc.via ILDA port) ILDA: 25pin ILDA Standard Sub-D shaped 25pin connector; Can be operated with any ILDA-compatible controller; when the ILDA interface connected to the console.Light will automatically change and follow the console's operation; and you don't need to convert switch. DMX 512: 12 channels Basic patterns: gobos + animations(layers. Tunnels, fences, graphics. Movement: Rotation. Bounce, zoom, color, slowdraw, stretch& rolling etc. Cooling method: Fan cooling accessories:10m ILDA cable. Power cable, DMX cable, manual Applicable: Disco. KTV, Pub, Bars, Clubs, Family party, Opera House, Advertisement, large stage, entertainment center, trade show, corporate special events, casinos, etc. power supply: 110V~240V AC 50/60 Hz Rated power:30W Condition temperature: 10℃
Arctic Spyder 3(iii) laser 1W bundle
In this listing I have my Arctic Spyder 3 with accessories. I’ve had it for about a year. Everything is in perfect condition except for tiny microscopic scuffs on the corners of the metal. Also. The bottom cap of the charger kept coming off so I super glued it. I have always stored it with the battery outside of the laser and taken extreme care with it. It is a 1W laser with a blue light and will without a doubt burn through things and also blind people. Be careful with it. What you see in the photos is what you get. So make sure you take a look at them. Everything functions perfectly. I haven't even used most of the accessories.You most likely will have to charge the battery before using it. Feel free to message me if you have any questions on how it functions or what not. Normal 0 21 false false false ES X-NONE X-NONE
Synrad J-48-1W Laser System w/ Synrad Controler Ophir Smart Display Parker Slide
Synrad J-48-1W Laser System w/ Synrad Controler Ophir Smart Display Parker Slide From our inventory we are selling a Synrad J-48-1W Laser System w/ Synrad Controller Ophir Smart Display. Specifications: Model# J-48-1W. UC-2000, 1Z01500, SPL250-1024, 402002LN-MP-D2L3C4M1 More Information: Laser: J-48-1W, Key: Included, Voltage: 30-32VDC@ 7A Power Output: 10W Power Stability: ±10% Beam Diameter: 3.5mm Cooling System: Not Included Cooling Rating: 200W Flow Rate: 0.5 GPM Temperature: 18-20°C Thermal Shutdown: 60°C, Overall Dimensions: 2.8" x 4.45" x 18.13" Length Hours: Unknown, Controller: Synrad UC-2000 Voltage: 15-30VDC@ 100mA Clock Frequencies: 5kHz. 10kHz, 20kHz Control Knob Increments: 0.5% or 5% Interface: RS-232, Power Display: Ophir Nova 1Z01500 Display: 32 x 122 Pixels Digit Size: 12mm Refresh Speed: 15/sec ... moreBattery: Rechargable 12VDC Est. 18 Hours Power Supply: 120VAC to 12VDC Included Recommended Laser Heads: Pyroelectric. Photodiode, Thermopile, Power Supply: Power-One SPL250-1024 Input Voltage: 120VAC Input Amperage: 8A Output Voltage: 30VDC Output Amperage: 7A Wattage: 250 W DC, Slide: Parker 402002LN-MP-D2L3C4M1 Travel: 50mm Mounting: Metric Grade: Precision Drive Type: 2mm Leadscrew Limit/ Home: Fixed Optical Limit/ Home Switches Motor Coupling: 1/4" Bore. Bellows Motor Mount: NEMA 23, Please Note: We have no records of the service hours for this laser system. All information above is taken from the manufacturer's data sheets. The laser is used so performance may vary. Our 14 day return policy does apply. Due to the sensitive nature of the laser freight shipping is required. Feel free to contact us for a freight quote. Bay 3 SKU# SB-081073 90 lbs Next Day Automation focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. We will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you wi
1W, 910NM Hand held laser, battery operated--- with black aluminum body
Today up for your consideration is 1W 910NM Hand held. Laser that looks to be battery operated. It has an aluminum body with a purple or blue glass lens in it. On the rear is a cap that screws on like a flashlight cap dose. In the cap is a button that I assume is used to turn it on. I Have no idea if this works or not, in fact I don’t even know what kind of batteries to put in it. This came in a box of laser stuff I got at an estate sale several years ago. The guy I bought them from stressed that these are not toys and that the appropriate eye and skin protection must be worn when using them. By bidding you agree to know the danger of this item if not used with the proper protection. If you have any questions please ask. THANKS for looking!
High Power Coherent Laser Diode Burning Industrial Fiber Optic 1W Agfa CTP Part
LAST ONE! This is a 1W 835nm laser diode that is coupled to a ST style fiber. It is very good for IR illumination and industrial applications like cutting and engraving. These lasers are extremely hard to find. And unlike the standard bare diodes, you do not need special optics to use it, a simple focusing lens will do. Oh, you could also use this diode to repair an agfa plate setter as long as the diode it uses is less than 1W and has the ST style fiber connector. It even comes with a coupler/generder bender! I also have some 1-2W 835nm 9mm plate setter diodes listed as well. This item is pretty hard to find reasonably priced, they sell for about 500 surplus, and over a grand new from a prepress repair shop. I have lots of laser and other unique stuff for sale this week. Just a heads up, several people notified me of trouble bidding near ... morethe end of listings, to avoid this disappointment, if you actually NEED this item either bid what you think it's worth early, or Buy it now outright. Many of the items i sell are extremely unique and several of them when they are gone, they are sold out for good. Thank you for looking at my auctions!
Nichia NDB7475T 520nm 1000mW/1W Green Laser Diode TO-5 Φ9mm Solder-Pin Version
Specification Wavelength(nm) 520nm, Power output(mW) 1000mW(Full 1W version NOT the 700mW version) Beam Details, DOT Effect(need Extra collimation Lens) Working Voltage(Voltage) Working Current(mA) Working Temeprature( °c) +10~+35, Storage Temeprature( °c) 10~+45, Size, TO5 φ9mm Package List 1 laser Diode with solder Pin(Non Brand New) Operation Tips, 1.Avoid overling lighting duration. 2.Avoid heavy vibration in operation. Shipping Time Ship Via Desternation Delivery Period Fees Tracking Status Airmail Post, US, 10-15 Days, Free, Y, Other Countries, 15-25 days, Free, Y, DHL/Fedex/EMS, US, 3-7 days, $20, Y, Other Contries, 7-12 days, $25, Y
Wicked Lasers Arctic Series Spyder III-World's Most Powerful Handheld Laser-1W
This unit has been used once for a demo and is in all other ways new. There are no cosmetic or other defects. Comes in original box with glasses. Charger, battery, and additional optic lens set of mirrors, prisms, and lenses(pictured)
1W Blue Laser Diode TO-18 5.6mm 445nm #8
This laser diode emit high intensity visible light which can be hazardous to the human eye. Only for Professionals! Used approx 13 000 h. Tested and working. Color output Typ. Blue- 445nm. Continuous optical output power: 1W. Operating current Typ. 1.0A. Operating voltage Typ. 4.2- 4.8V. Efficiency approx. 1 A/W. Small package: TO-18/ Ф5.6mm. Live Time min. 20 000 h. Without a cooling system: overheat and destroy to 5S after power on. Rear side used for cooling. Recommended 2mm thickness copper plate with triangle hole for pins. This laser diode needs Driver- NOT included. For focusing requires 445nm three Layer coated glass focusing lens- NOT included. Other Information: http:www.lz4gv.com/Laser/Laser.html. Attention: The following practices should be followed to minimize damage to static sensitive devices. 1. Discharge personal static before ... morehandling devices. Use grounding wrist strap. 2. After removed from anti static packing. Handle laser diode by the body. 3. Do not slide laser diode over any surface. 4. Only grounded tip soldering irons should be used. 5. Connect to ground Soldering Wire with Rosin Core. 6. Shorted both pins after finished. 7. Remove Short after connect to driver. 8. Use quality Constant Current Driver for this LD- accurate Current and Voltage. 9. Direct connect to Standard Power Supply will damage the LD. Note: If you do not follow these. This will damage the laser diode. For this reason Returns will not be accepted for this item. Delivery: Аirmail + Тracking information Powered by The free listing tool. List your items fast and easy and manage your active items.