|
High power 808nm bar diode for laser diode burning or hobbyist projects. HOT.
I guarantee this lightly-used bar diode will arrive in full working condition or it will be replaced. Burns aggressively. I have 25 of these which will be sold on ebay as I am able to list them. If you want all 25. Send me an offer. The Coherent laser diode bar on passive cooler series has been designed to provide the high brightness and and reliability required for both collimated solid-state laser pumping and direct applications. features: Mounted 10mm x 1.2mm laser diode bar•Passive 1" x 1" Cu block cooler•30% fill factor(150µm emitter/ 500µm pitch) 20W operating power•Highly reliable single quantum well MBE structure•Telecom grade AuSn mounting technology•RoHS Compliant
|
|
|
Fiber-Couple laser Jenoptik diode laser 808nm 20watt cw 20w diode laser
Diode Lasers. Design: 215415624, 20 W cw, 880 nm, fiber-coupled 0.4 mm, NA 0.22. Pumping of solid-state lasers: high power( 1kW)Low power( Diode direct: non-metal, Medicine/ophthalmology: laser surgery and others, High optical output power, Cooling: passively cooled with integrated TEC, Operation mode: cw. Power modulation only between threshold and maximum current, Lifetime: 20.000 h(constant current) under qualification, Power monitor: Infineon. SFH 229, Temperature sensor: PT 100 and PT 1000, Quantity of submounts: 1, if you can not see the pdf.Ask me JOLD-X-CPXF-1l laser diode Jenoptik JOLD-20-CPXF-1L fiber-coupled diode laser 808nm。20cw. I have sold 32 psc yet. working. On Jun-30-11 at 07:09:16 PDT. Seller added the following information:
|
|
|
3 watt Cutting Burning Portable IR 808nm Laser Night Vision Illuminator
This is a very powerful laser infrared laser. You must observe safety precautions and avoid any direct or reflected contact with the beam. It will easily and nearly instantly burn printed paper(the white parts reflect light better. So take longer) By adding a beam expander, this would make an excellent long range night vision illuminator. Buy bidding on this, you agree that you are knowledgeable of and responsible for the proper use of this item. It is self contained with a rechargable battery. It only has about 15 minutes of use as a demonstrator. At this wavelength, the light is nearly impossible for the eye to see(though at very high power levels, a slight perception is possible) but is easily seen with night vision equipment.
|
|
|
Diode Laser module 808nm 20W CW 1AC808LI4, from LASERVALL 0FDW0251L3
apps.froo.com | Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Item condition& description: To find in the Item specifics(top of description MENU tap) and all above pictures. You can intentionally find the defective on body. Scratch, and test if any in the pictures. Please advise me if pictures are not clear. You can find the" Technical specification" in the Google.com and product WEB link. Thank you. This item listin g is not including as follow ing. 1. Calibration. 2. All cable. 3. Laser cable unit. 4. Laser Head Focusing Lens unit. 5. Controller and software unit. Shipping Info: Usually Items send out within 1 working day after receiving cleared payment. Shipping time 18-26 Days for Economy international/ Free Shipping. Shipping time 7-10 ... moreDays for Expedited international Shipping. Varies for items shipped to an international location depend on local post. Shipping service and receipt of Delivery times may vary. Especially during peak periods. Track& Confirm: The registered and tracking number will be see in the eBay purchased history and PayPal after shipment. Could you please to enter your item tracking number at link following. http:track.thailandpost.co.th/trackinternet/Default.aspx?lang=en In the United States can track item at below. https:tools.usps.com/go/TrackConfirmAction.action or https:trkcnfrm2.smi.usps.com/PTSInternetWeb/index.jsp Question: If you have any question about the item. Feel free to email us at eBay messages. I will do my best to answer. Thank you for interesting and let me know. Feedback: The 5 star Positive feedback is very important to me. I have to highly standard of excellence 100% customer satisfaction. Could you please contact me immediately to satisfactorily solve problem for best service. Would not give me unfair. Neutral or negative feedback. Thank you. Payment: We accept only Get PayPal buyer protection for your item when you pay with PayPal. Return: Generally standard
|
|
|
Coherent Spectra Head Diode Array 20 Watt DPSS 808nm
Coherent diode array USED 808nm For Spectra Laser Head jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13efe3a54be-0xf7-
|
|
|
Dilas 808nm Laser Diode 40W-50W DPSS Conduction-Cooled Single bar / Avail QTY
Payment Policy Dilas 808nm Laser Diode 40W-50W DPSS Conduction-Cooled Single bar/ Avail QTY Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Dilas 808nm Laser Diode 40W-50W DPSS Conduction-Cooled Single bar/ Avail QTY Used Condition Dilas Laser Diode Conduction-Cooled Single Bar DPSS Array Wavelength: 808nm Output Power: 40W-50W http:www.dilas.com/gdresources/downloads/products/DILAS_SB_808nm.pdf INV# 8J90538-05-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. ... morePayment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is UPS for all domestic and international
|
|
|
Dilas Conduction Cooled Fiber Coupled 808nm Laser
Dilas 808nm. 400µm, Conduction-Cooled, Single Bar, Fiber-Coupled Module. Model: M1F-SS2.1 Details: Comes as shown Lightly used. Perfect physical condition Specifications: Weight: 10oz Dimensions: 3" x 1 1/4" x.5" Wavelength: 808nm Fiber couple size: 400 µ m Manufacturer Details:
|
|
|
(LOT / 2) Coherent 20,000 mw 808nm Fiber Array Diode Package FAP Laser DPSS Pump
NOTE: IMAGES ARE*TYPICAL* OF UNITS BEING SHIPPED AND ARE NOT NECESSARILY THE UNIT SOLD READ LISTING CAREFULLY NOTE: THIS LISTING IS FOR A LOT OF TWO(2) ITEMS. These are used and untested(but known to have been removed from working systems) coherent FAP IR laser arrays. Inside of each is a diode array bar connected to optical fibers that join at a singular fiber optic terminal for direct output or coupling to a fiber optic cable to deliver laser light to the intended device. These are labeled anywhere from 15 w(15.000 mw) to 45 w(45,000 mw) and have various minor visible problems such as slightly bent or even broken electrical terminals, heat sink base and case scratches and small dents, broken or bent external fiber optic ports, and other apparent damage that(of itself) won't affect the ability of the diode bar to lase. Still, because ... morethese are neither tested nor opened to inspect the diode bar, they are being sold at deep discount as parts or repair only. No returns will be accepted on these items. All lasers came and will be shipped with an ESD terminal short(if possible) and in ESD protective materials.
|
|
|
Lot of 8 Dead Laser Diodes 445nm 405nm 808nm red violet blue - scrap recovery ?
This auction is for the following: This is a LOT sold together(1) 250mw red diode. Let it sit around and as soon as i decided to connect it, it winked out. could not return(3) 445nm 1w from the original projector- dead(i have heard you can replace a few in a projector with these and the projector will keep running. No idea if its true) 1) 405nm working. Unknown MW(I think 50mw but unsure, the diode with the green and red wire) 2) really messed up c mount diodes(scrap i dont know what these could be for otherwise) 1) 1w 808nm diode unknown condition. Could have seen better days but I think it works Scrap recovery? could be gold? not sure I ship by USPS or UPS Ground. The choice is yours on checkout. There are advantages and disadvantages to both. USPS: Does NOT guarantee arrival time unless you use express mail. Their tracking is not really ... moretracking but rather usually only shows when the item has been delivered. It does not show when an item has been picked up. I usually ship the very next day with USPS since they do at home pickup everyday free of charge-USPS Priority mail is usually cheaper and quicker to get small items across the country-They offer free boxes for priority mail so I do not charge an extra fee for packaging UPS: Offers up to date tracking-I usually ship this within the following 2 days of payment. I can not drive to the UPS store every day to drop off packages-Free insurance up to $100-Shipping from east coast to west coast via UPS ground takes 6 business days from the date of drop off Upon receipt. Please leave positive feedback with 5 stars. 5 stars is important to eBay sellers. If you feel this transaction was not 5 star worthy please e-mail me and let me know what I can do to better the transaction. I do respond extremely quickly. Ebay has buyers rate sellers on 4 categories. I will outline them below and explain how they should be rated. I will leave feedback as soon as I receive it Item as described: Is the item described in my written description above accura
|
|
|
Laser Diode Bar High Power 40W 808NM JDSU Coherent
These are Laser Diode Bar High Power 40W 808NM I don't have any additional info on these units. But they look great cosmetically, and come with 30 days warranty. We believe they are JDSU or Coherent. Probably used. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if we can. All sales are final. Please understand ... morethat this is an auction/liquidation environment, not a retail store, so make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is no extra cost to ship to AK, HI, PR, or PO boxes, the
|
|
|
Iridex Laserscope Iris lasers fiber optic cable 808nm 810nm 3 meters 200 micron
Nice Fiber optic cable for Iris or Iridex(formerly laserscope) laser delivery systems. This one is the 810nm version. 200 microns dia. core. For the Iridex 810 Ophthalmic lasers. Cleaned and ready for use. Fiber core will be similar to one in pic. shown in center. 3 meters long. Used for around 3 watts laser power. Possibly more. The ferrule is metal and not plastic to handle more power. Thanks for looking
|
|
|
Iridex Laserscope lasers fiber optic cable 808nm NIR 3 meters 1500 micron
Nice Fiber optic cable for laserscope laser systems. 1500 microns dia. core. Yes. It's huge. These have SMA connectors on the laser end( large knob around the SMA) and a smaller output end with no connector. you clamp in place) Cleaned and ready for use. Fiber core close up in last pic. just fit in my 1500 micron view area) no burns, some discoloration to the coating that should not hinder your beam. 3 meters long. See my other auctions for other cables bending radius about 6" heavy duty. AR coated ends appear the same coloring as on Verdi laser fibers. The core of the fiber has a rectangular aspect. I'm not sure if this is for polarity or what. Only have one. Thanks for looking
|
|
|
High Power 5 Watt 808nm Laser Diode Chip Emitters Box of Over 20 of Them!
This is a lot of over 20. 5 watt laser diode die chips. These are unused parts from a project that was canceled. They were intended to be used for a small but very powerful dpss Q-switched laser. These are delicate parts that need extreme care to solder right. Also included is a box with several 860nm 1w laser emitters to use to practice soldering these tiny things with. I have lots of laser and other unique stuff for sale this week.
|
|
|
Large High Power Industrial Laser Diode Welder Cutter Cylindrical Lens 808nm 3KW
This is a very large cylindrical lens used for industrial laser diode welding and heat treatment machines up to 3KW optical power at 808nm+. 15nm. It is part of an optical system that will correct the beam from the arrays to make it able to be focused to about 10mm on the workpiece. The lens will work with other wavelengths up to 980nm and as short as visible ranges, with some attenuation in the green region. The lens measures 150mm FL and is approximately 60mm long by 50mm tall. This lens appears unused. This item is very hard to find. I have lots of laser and other unique stuff for sale this week.
|
|
|
2-3 Watt 808nm High Power Laser Diode Chip Emitters Box of Over 10 of them
This is a lot of over 10. 5 watt laser diode die chips. These are unused parts from a project that was canceled. They were intended to be used for a small but very powerful DPSS Q-switched laser. These are delicate parts that need extreme care to solder right. I have lots of laser and other unique stuff for sale this week.
|
|
|
High Power IR 808nm Knife Edge Pump Mirrors for 1-5W Laser Diodes 10 Pieces
This is a box of 10 Lambda Research knife edge mirrors for combining high power laser diodes up to 5 watts per mirror block. The mirrors reflect at 45 degrees and are usable for laser beams from 780nm to 860nm. This means you can build an array with a combined power of 50W total using easily replaceable 5w laser diodes. The arrays these were made for was a technology made for Boston Lasers BLI-MODULE super-bright light sources. The final beam spot out of the complete module as either 150 or 250um into a fiber. The mirrors are new old stock. Only unwrapped to show you what you are getting. These items are pretty hard to find. I have lots of laser and other unique stuff for sale this week.
|
|
|
High Power 808nm 50W Coherent FAP Laser Diode Collimator Lens SMA Optic
This is a collimator lens for an 808nm 50W FAP laser diode block. The laser it is used with looks like a gold block with a SMA connector on one end. It will make the beam into a much more manageable spot useful for heat treating and other uses. The optical lens is fine. But the outer casing has some scuffing as pictured. I have lots of laser and other unique stuff for sale this week.
|
|
|
808nm High Power IR Illumination Target Designator Laser Diode Module 500mw Max
This is a module that outputs up to 500mw of 808nm IR light. You can remove the lens for a very efficient IR floodlight for NV gear. Or it can be collimated into a beam for a long range target designator. It can even be used at close range for burning stuff or driving DPSS crystals. Overall it's pretty handy. I have lots of laser and other unique stuff for sale this week.
|
|
|
Antique Optical Schott Glass Photography Laser Filter Near IR Transmitting 808nm
This is a 2x2 inch square of Schott glass filter that passes wavelengths longer than 800nm. It was designed either for laser filter use or photographic use. I took a picture of some lights and you can see it filters out nearly all the visible light. The hot pink color is how most digital cameras see near infrared light. You can barely see through it. This glass is nice to use when testing laser pointers for leakage of 1064nm or 808nm as it blocks all the green light. I have lots of laser and other unique stuff for sale this week.
|
|
|
High Power 50W 808nm Coherent Thermoelectric Laser Diode TEC Cooling Module
This is a laser cooling assembly for a 50W 808nm(or any other) Coherent FAP laser diode. It can cool up to 300W of load to 5 degrees C from room temperature at 25 degrees C. Besides use as a laser cooler it would work nicely to build a small lab refrigerator or cool a fish tank using a few CPU liquid cooler pump and heatsinks. This item is pretty hard to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Coherent 25W 808nm DPSS Pump Burning Cutting Laser Diode Lens Optic
This is a very high quality meniscus lens used for DPSS pumping. It can also be used as a workpiece lens for an industrial cutting/burning laser. It has a FL of about 6mm. And will accept beam diameters of up to 9mm. I used one of these to replace a damaged lens in a small industrial micro-welder, and it worked BETTER than the original lens did when it was new! The optical lens elements in this one were OEM'ed by Coherent, so this is an extreme quality optic! This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Thermo Electric Cooler Mount 3w 808nm Nd:Yag YVO4 Pump Laser Diode
This is a neat assembly that emulates an expensive HHL or TO3 laser diode with integral TEC cooling. It has a 3 to 5W C-mount laser diode on top of a nice TEC cooling mount with thermistor feedback. It would be ideal for pumping nd:yag or YVO4 crystals. Also you may remove the IR laser diode and use it for more expensive red laser diodes for light show use. Shown is the 808nm laser diode running at about 2.5A. This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143d3829614-0xf0-
|
|
|
808nm 1-2W High Power Laser Diode Module Head Assembly Industrial Burning Part
This is a nice 808nm 1-2w laser diode in a heatsink/lens assembly. It is tested with 1.3A and burns stuff quite nicely. it went through anti-static foam almost instantly!You must limit the current to use this assembly. It is NOT a complete module, just the diode, lens/heatsink, and leads. Note: THE LASER BEAM IS a BARELY VISIBLE DIM RED, but MY CAMERA SEES IT AS MAGENTA! I have lots of lasers, tubes, and other unique stuff for sale this week.
|
|
|
High Power 10W 808nm Green Nd:YAG YVO4 Laser Diode Collimator Lens Optic
This is the lens used in a high end dpss laser to collimate a 5W pump diode. It could be used with emitters of up to 10W of actual power. Possibly higher, but the lens input diameter is the real limiting factor to power input. The input side is 6.5mm, and the FL is about 3mm. It also has been tested to work very well with high power red laser diodes too. The optical elements in this one were OEM'ed by Coherent, so this is an extreme quality optic! This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
810nm 808nm Fiber Optic Laser Diode Photodiode Detector Band Pass Filter Lens
This is a narrow band 810nm +.3nm bandpass interference filter for target designators and long range optical sensors based on laser diode sources. It can also be used for power measurement of IR pump leakage from laser pointers, or as a quick go/no go test for testing surplus so called 808nm laser diodes with. The long wavelength makes the signal to noise ratio very high compared to shorter wavelength lasers for machine vision applications also. It is 1 inch diameter. This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
808nm 25W Thor Labs Spectra Physics Laser Diode Fiber Optic Collimator Lens Inva
This is the ultimate fiber optic collimator lens for high power fiber coupled laser diodes. It has an invar case and a precision AR coated lens that is good for 25W of power. The lens is coated for both a red 635nm aim beam with the peak transmission at 808-815nm. But is usable to about 910nm. The lens is 1/4 inch diameter with the standard SMA style connector on the back. Like any other fiber collimator lens, the smaller the diameter of the fiber the better the collimation will be. I have lots of lasers and other unique stuff for sale this week. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14443f0a505-0xec-
|
|
|
High Power 808nm 60W FAP Coherent Laser Diode 800um SMA Optic Fiber 3 Meter
This is a sma optical fiber that fits the smaller size FAP Coherent lasers with the 800um core. It will work with the Coherent 20W+ gold FAP laser diodes with the 800um core output connector. This was used on a galvo steered laser welder machine. I have the collimator lens that attaches to this fiber in another listing. This item is quite difficult to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power TEC Cooled Red Ir C-mount 808nm 3-7W Laser Diode Mounting Assembly
This is a precision TEC cooled mounting for a c-mout diode. It will work well for diodes up to 7W of optical power. If you have a high power red C-mount diode that you want to keep cool. You need this part! It has thermal sensor feedback too. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Infared IR laser Beam shaping optic Melles Griot Collimator C-mount diode 808nm
High quality mounted IR collimating set multi glass lens and fully coated Posted with
|
|
|
LASER-THERAPY US COLD LASER 808NM & 635NM
LASER-THERAPY US COLD LASER 808NM& 635NM WORKS GREAT. DUE YOUR RESEARCH. GOGGLES HAVE ONE BROKEN ARM. MUST BE LICENSED HEALTH CARE PROFESSIONAL TO PURCHASE
|
|
|
Oclaro 20 watt 808nm Laser Diode DPSS BPC808-20
20 Watt Diode These diodes were obtained from another eBay seller. He said these diodes are from Oclaro q/a engineering and were from pre- production test runs of this 20 watt diode type. Actual operating specifications will be with in 15% of the Specification Chart below. The 20 watt diode specs are in the second column shaded green. Every diode will be tested for power and wavelength prior to shipping to you. Description The Oclaro BPC808-20 30% fill factor laser diode baron passive cooler series has been designed to provide the high output power and high reliability required for both solid-state laser pumping and direct applications. The laser diode bars are mounted on an expansion matched submount onto a Cu block package providing very high reliability in CW and pulsed(1-Hz type)applications) applications. Applications § Solid state ... morelaser pumping § Direct applications such as material processing § Printing § Medical Features § Mounted 10mm wide laser diode bar § Passive 1" x 1" Cu block cooler § 30% Fill Factor(150µm emitter/ 500µm pitch) § 20W operating power § Highly reliable single quantum well structure § Telecom grade AuSn mounting technology § RoHS Compliant BPC808-20 BPC808-40 for ref purp Wavelength 2 808 ±3 nm 808 ±3 nm Typical Spectral Width(FWHM) Maximum Spectral Width(FWHM) 5 nm 5 nm Output Power Po 3 20 W 40 W Operating Current I op 4 30 A 54 A Maximum Operating Current I op 34 A 60 A Threshold Current I th 5 7.9 A 9.9 A Maximum Threshold Current I th 9.0 A 12.0 A Number of Emitters 19 19 Typical Conversion Efficiency 35% I op 35% I op Typical Beam Divergence 90% of rated power within 14° cone angle(0.12 NA) 90% of rated power within 14° cone angle(0.12 NA) Electrical Maximum Operating Voltage 2 V 2 V Maximum Reverse Voltage 3 V 3 V Maximum Negative Current 25 µA 25 µA 1. Centroid wavelength@ 25°C thermistor temperature 2. Guaranteed minimum optical output power 3. Typical operating curre
|
|
|
Anamorphic Prism Set works for 445nm thru 808nm
Nice mounted prism set used shape laser diode output. These were made to shape IR laser light but work well on the 445nm lasers as well with only a small ammount of light lost. Posted with
|
|
|
Compact Faraday Rotator / Isolator variable 750-900nm 808nm, 4mm aperture
Robust and compact Faraday Isolator for 750nm to 900nm lasers. A little under 4mm dia. aperture. Figure 3mm clear. Simple heavy aluminum base with rotation set/lock screw. Unit is solid with one of the two waveplates tunable. Just dial in your wavelength. Dimensions are: 71mm long. 35mm dia. 48mm tall, 40mm wide with 25mm deck to optical axis. Base has 3 1/4-20 tapped holes for mounting. Highly magnetic. Exit and entry ports are bluish AR coated. Last 2 pics show how it works as a light valve or optical diode. Look through one end and see red. Look through the other and see yellow. Don't know of any other optics that do this trick. No part number or maker. Though it could be an"Isowave" As it's base style looks identical to their current models. Thanks for looking
|
|
|
Coherent 40 Watt 808nm Laser Diode Module DPSS Green
You are bidding on a Coherent 40 watt 808nm laser diode module. This module includes a thermoelectric cooling system. Pinout specifications can be provided. I have tested this module to be putting out 40 watts@ 57 amps. The fiber core has been inspected and is free from any burns or scratches. Due to the sensitive nature of this item, it is being sold as-is without a warranty. The buyer takes full responsibility for safety risks involved with this type of equipment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144e22707ed-0x106-
|
|
|
Dilas 40W 808nm Laser Diode Bar CCP 19 Emitter High Power
Dilas 40W 808nm CCP Laser Diode Each conduction-cooled. Single bar diode laser is manufactured to the industry's highest standards, resulting in stable sources with the highest beam quality. Available as free-beam, fast-axis collimated, fully collimated or fiber-coupled modules and in open design or sealed housings, combined with appropriate soft solder or CTE-matched hard-solder technologies. These diodes are lightly used and we have carefully inspected them and tested them to confirm power and wavelength. Each diode comes with a spectral plot and operating current. Specification: CW Output Power: 40W. Center Wavelength: 808nm +/ 3nm at 25C Number of Emitters: 19. Stripe Width: 150um Beam Divergence. Fast Axis(90% Beam Divergence. Slow Axis: Threshold Current: 8A Operating Current: Click for detailed specifications from the manufacturer's ... moreweb site. To see other related items. Be sure to Visit my eBay Store If you like what you see. You can Add Junktronix to your Favorite Sellers List Why Buy From Junktronix? eBay member in good standing since 1996 We specialize in lasers and photonic test equipment and have developed expertise and tools to properly test most of the items we sell All items offered with a 100% Satisfaction Guarantee Payment We always accept payment by PayPal. If your organization does not allow PayPal. Please contact us to arrange payment by credit card or bank wire transfer. California residents will be charged sales tax. Shipping Please use the eBay shipping calculator to determine the carrier and cost for shipping. We ship most items by USPS with no packing or handling charge added. Some heavier or more expensive items will ship by UPS. We can ship by FedEx on request and international delivery by DHL is also available. Please contact us before bidding if you require a different shipping method. Warranty Items listed AS-IS do not include any warranty. Items listed as NEW or USED are guaranteed to arrive in the condition described in the listing. Items which are found to be significantly
|
|
|
Lot of Coherent High Power Laser Diode Parts Chips 0-7W 860nm 808nm
You are bidding on a lot of laser diode chips and parts. There are 7) 860nm? laser diode chips that are rated 5-7W of output- they probably work. But no guarantee on the wavelength. There are 3x 808 chips on sub-mounts rated 2W, they are from 2002 so they might work, but no guarantees. There are also 2x 798nm InGaAs VESCEL lasers that probably DO NOT WORK. If even one item in this lot works well, you are ahead. This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
Coherent 18 Watt 808nm Laser Diode Module DPSS Green
You are bidding on a Coherent 18 watt 808nm laser diode module. This module includes a thermoelectric cooling system. Pinout specifications can be provided. I have tested this module to be putting out 18 watts@ 24 amps. The fiber core has been inspected and is free from any burns or scratches. Due to the sensitive nature of this item, it is being sold as-is without a warranty. The buyer takes full responsibility for safety risks involved with this type of equipment.
|
|
|
High Power Coherent 808nm 5w Burning Cutting DPSS Nd:YAG Pump Laser Diode Cmount
This is a 808nm laser diode that is good for pumping small Neodymium DPSS lasers. As with any other higher power laser diode it can be used to cut and burn very thin materials. But is best suited for IR illumination, and laser pumping. It is extremely well suited for a potent Night Vision illumination for most commercial grade stuff! This item is pretty hard to find reasonably priced. I have lots of laser and other unique stuff for sale this week.
|
|
|
High Power 808nm 25W Spectra Physics Laser Diode Fiber Array DPSS Yag Pump Cable
This is a Fiber array cable for a spectra physics millennia laser. It adapts a 19 emitter 25W laser diode bar to a 800um fiber bundle. Or it can be used in reverse with a Coherent FAP laser(to 50W) to make a line of energy for pumping a small yag rod such as the one in my other listings. The fiber is a very clean pulled spare part from new old stock laser diode modules that failed confidence testing. The length of the cable is about 17 feet(5 meters) not counting the connectors, and even has the protective end cap on the output end. If you fried the tip of your SP millennia pump laser, this will fix the problem. Alignment is sort of tricky, but can be done by running the diode at low power(near threshold) and using a sensitive power meter to measure the output. I have lots of lasers and other unique stuff for sale this week. 336.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1455dc12fc9-0x10e-
|
|
|
High Power Spectra Physics 808nm FCbar Laser Diode DPSS Yag Pump Module Parts
These are 3 very low power. Nearly dead, output spectra physics FCbar laser diodes. The laser diode bars have a long FAC microlens that could be easily removed and used to correct the beam on other laser diodes if so desired. They have the protection boards and the heat sinks too. These would be good for bench testing laser diode power supplies to make sure the current is operating correctly when you don't want to risk damaging your expensive new or good used diode. See my other listing for the very useful fiber cable assemblies I carefully pulled from these diodes. I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Coherent Titanium Sapphire Laser Mirror Optics Part 808nm to 1050nm
This is a Coherent Ti sapphire HR laser mirror. It is highly reflective at the near IR between 800nm and about 1000nm. The optic measures about 3/3 inch long and 1/4 inch wide. It is pretty hard to find. I have lots of lasers and other neat items this week also!
|
|
|
Sony SLD3nn-XT Laser 808nm 0,75 W@ 1.5 amp
Sony SLD3nn-XT Laser 808nm 0.75 W@ 1.5 amp Data sheeet can be easily found on the web. Some of these have collimating Lens attached by Spectra Physics. Please let me know if you do not want the attached lens.
|
|
|
Dilas Laser Diode Assembly 808nm #330
Dilas Laser Diode Assembly 808nm Center Wavelength Range: 808 nm For sale is the item shown in the pictures for this listing. No additional accessories included. 30 days warranty is included with purchase. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if we can. All sales are final. Please understand that this ... moreis an auction/liquidation environment, not a retail store, so make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is no extra cost to ship to AK, HI, PR, or PO boxes, these are all fi
|
|
|
Spectra Physics Fiber Coupled 808nm 20w Diode w/ TEC Forced Air Heatsink BURNS
Spectra Physics J20 Head Assembly Fiber Coupled 808nm 20w Diode w/ TEC Forced Air Cooling Fins. Diode at Fiber tip(FC connector) is 16w at 35 amps/ Fiber is in Excellent Condition. 12v TEC x2 is working perfectly. Just add power and air. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Coherent High Power Laser Diode 808nm Galvo Welder Mirror Optic Set Matched Pair
This item is a lot of two galvo mirrors that reflect near IR laser diodes used for precision welding and soldering of SMD parts. The mirrors are definitely used with some small traces of glue on them. They are about 1cm square. They have a lot of life left in them. This item is pretty hard to find I have lots of laser and other unique stuff for sale this week.
|
|
|
Large Gold Coherent 808nm 50W Laser Diode Pumped Crystal Optical Assembly YVO4
This is a large dpss lasing crystal in an extremely heavy duty water cooled mounting block. The lasing crystal itself measures 3x3x5mm. And is in a large heavily gold plated mounting block. The mount seemed to be gross overkill until i found out the laser it went to originally made 20+ WATTS of green light output! The crystal ends are in perfect condition, so if you want to build that big scary DPSS laser project you have in mind, but never could afford, this is for you. Side 1 has AR 808nm, HR 1064/532nm, side 2 has AR 1064nm and 532nm. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Coherent High Power Laser Diode Welder FAP Primary Collimation Lens 808nm 60W
This is the primary collimator assembly from a high end DPSS micro welder engraver. This optic collimates the beam from a FAP laser diode. It turns the flashlight like output of these modules into a laser pointer like beam which was then focused onto a DPSS crystal. The lens diameter is about 3/4 inch. Focal length is about 1.5 inches, and the collimated output beam is about 1/2 inch. I have other optical parts from the dpss laser set up on ebay as well. I have lots of laser and other unique stuff for sale this week.
|
|
|
30 Watt Coherent FAP 808nm Diode Array Laser Package
Untested(presumed to be functional) Coherent Fiber Array Package diode laser. We believe that this laser is 808nm and had a design peak power output of 30 Watts. Because they aren't tested(we only test these with their design TEC in operation) We are listing them as"for parts" Use at your own risk, these units are sensitive to ESD.
|
|
|
Coherent 808nm High Power Laser Diode Chip Dies 14 Pieces 1-3W LARGE LOT
This is lot of high power 808nm laser diode chips. These chips are in good condition. You get 14 laser diode chips rated for 3W as pictured. If you can use them you have a great deal on a hard to find item good for DPSS pumping or covert IR illumination! This item is pretty hard to find I have lots of lasers and other unique stuff for sale this week.
|
|
|
12 Watt Coherent FAP 808nm Diode Array Laser Package WORKS,TESTED AND GUARANTEED
Independently tested Coherent Fiber Array Package diode laser. This laser is 808nm and had a design peak power output of 12 Watts. The unit is known to output 11.71 optical watts at a maximum current of 16.0 amps. Because these units are frequently damaged by inexperienced users who don't take ESD. Active cooling and overcurrent precautions we won't accept returns except for doa or out of spec units. Please note that our contracted tester microphotographs the semiconductor materials on these to confirm returned units weren't damaged by user error. If you're not familiar with the operation of laser diodes, these are NOT the unit to get your feet wet with. Use at your own risk, these units are sensitive to ESD and are IR class 4 diode lasers. Your eyes have no blink reflex protection against IR. Nor does flesh or flammable materials. ... moreEye protection, beam stops, and protective gear is MANDATORY.
|
|
|
Coherent 808nm 1000mw High Power 9mm Burning Cutting DPSS YAG Pump Laser Diode
Look at it BURN! This is a 808nm laser diode that is good for pumping small Neodymium DPSS lasers. As with any other higher power laser diode it can be used to cut and burn very thin materials. But is best suited for IR illumination, and laser pumping. It is extremely well suited for a potent Night Vision illumination devices for very long range use! This item is pretty hard to find reasonably priced. I have lots of laser and other unique stuff for sale this week.
|
|
|
CNC Laser Cable. FAP 800 laser combining cable 808nm 18 feet / 5.5 meter long.
Use this cable to deliver powerful laser energy to your work piece. By combining two 40w or 50w FAP-800 lasers for a total of up to 100W. According to the manufacturer. it is a 5 meter cable. Including branch leads it measures approximately 5.5 meters or a little over 18 feet. FAP-800 Laser units NOT included.
|
|
|
Coherent 12 Watt 808nm Laser Diode Module DPSS Green
You are bidding on a Coherent 12 watt 808nm laser diode module. I DO NOT KNOW THE CONDITION OF THIS ITEM. Due to the sensitive nature of this item. It is being sold as-is without a warranty. The buyer takes full responsibility for safety risks involved with this type of equipment.
|
|
|
ADSS model FG2000-B 808nm Diode Laser IPL for Hair Removal
ADSS model FG2000-B 808nm Diode IPL Laser for Hair Removal Please read our policies below including those on shipping BEFORE bidding! Please inquire about additional payment methods. For Local Orders that are picked up at our facility we can accept Visa. Mastercard, Checks, and Wire Transfers, Buy with confidence from#1 rated medical seller online. As an accredited business we maintain an A+ Better Business Bureau Rating and we take pride in putting our customers first! For more info about our company feel free to visit the‘about me” page. Click the icon next to our Ebay username. There you will find a link to our website and more. 30 Day Warranty! No handpiece included with this as it was lost in shipping. Beautiful working laser just removed from bankrupt facility. Please see our other auctions for more equipment from this closed facility! ... moreBeautiful touch screen laser! This one will not last long! Any questions about this item. Please contact Dylan Redd At 770-939-5971 or Cell# 404-403-1125 We offer dealer prices to the general public! Click the Icon next to our name to visit our Ebay Store and view our Incredible Year-Round Values! We Pride ourselves on being 25% CHEAPER than Anyone online! PLEASE NOTE: QualityMed. Inc. makes absolutely nothing on shipping whether it be freight or Fed Ex. So PLEASE. PLEASE when leaving feedback, and the Detailed Seller Ratings{DSR}s… Please do not leave us a 4 out of 5 on the shipping and handling charges. Please understand that 4 out of 5 according to Ebay is a FAILING score which costs us literally thousands of dollars and puts us in the bottom of the search listings. Currently our rating under shipping and handling fees is a 4.55 out of a possible 5. This is a FAILING score. Anything less than a 4.7 is failing. So please, please do not give us a 4 on the DSR ratings. If you have any problems with our service please let us know BEFORE leaving the DSR ratings or bad feedback. We strive very hard to process all orders quickly and effectively. Thank You for your co
|
|
|
Coherent 40W 808nm Laser Diode Bar CCP 19 Emitter High Power DPSS Pump (40-42A)
Coherent 40W 808nm CCP Laser Diode Conductively-cooled diode laser single-bar packages for solid-state pumping. Direct-diode materials processing, medical, reprographics, and illumination applications. Coherent’s industry-leading front, end-technology– including our unique AAA material systems– combine with a portfolio of rugged, high-quality packaging options to produce reliability 20k hours for most products in most applications. PulseLife technology enables reliability of 20k hours even in hard-pulsed ON-OFF applications and enables operation at temperatures as high as 75C. These diodes are in good. Used condition and we have carefully inspected and and tested them to confirm power and wavelength. Each diode comes with a spectral plot and operating current like the one shown in the last picture. This lot all produce the rated 40W output ... moreat a current between 40.5A and 41.9A. Maximum diode current is specified as 46A so these have lots of head room and should have a long life. All diodes have clean, narrow spectrum as well. Check my other listings for less expensive diodes that operate at 42.0- 43.9A. Specification: CW Output Power: 40W. Center Wavelength: 808nm +/ 3nm at 25C Number of Emitters: 19. Stripe Width: 150um Beam Divergence. Fast Axis: 35 deg. Beam Divergence. Slow Axis: Threshold Current: 8A(typical) Operating Current: Click for detailed specifications from the manufacturer's web site. To see other related items. Be sure to Visit my eBay Store If you like what you see. You can Add Junktronix to your Favorite Sellers List Why Buy From Junktronix? eBay member in good standing since 1996 We specialize in lasers and photonic test equipment and have developed expertise and tools to properly test most of the items we sell All items offered with a 100% Satisfaction Guarantee Payment We always accept payment by PayPal. If your organization does not allow PayPal. Please contact us to arrange payment by credit card or bank wire transfer. California residents will be charged sales tax. Shipping Please use
|
|
|
Coherent 50W 808nm FAP Laser Diode TEC Water Cooling Module Heat Sink
This is a heat sink with TEC modules for cooling a 50W FAP laser module. It is unique in that it is water cooled. Though it has enough thermal mass that it can be bolted on an aluminum heat sink as well. Extremely heavy duty part! I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Power Industrial Coherent Laser Diode 30W 808nm Burning Cutting Beam Gold
This is one of those high power gold laser diodes similar to the one that I offered months ago that was in a miniature precision welding machine. This one however. Came from a really powerful DPSS laser I stripped for parts because the YVO4 was fried. It makes 806nm at 25 deg C which is good for pumping higher power DPSS rods. You can run a little warmer if you want exactly 808nm output for a self-q-switched Yag or similar crystal. It takes about 2.3V at up to 40A to operate and makes an industrial strength burning laser beam out of the lens on the end. Included in the sale is a collimator lens for a welder machine. The lens is removable to use on other similar laser diodes(795-980nm) if you like. These lasers are very hard to find with the matching lens attached. Definitely not something you'll find at Radio shack! I have lots of lasers, ... moretubes, and other unique stuff for sale this week.
|
|
|
High Power Coherent FAC Corrected Laser Diode Bar Collimation Lens 808nm 50W
This is a 1 inch diameter by about 4 inch FL lens used to correct the beam from a FAC corrected laser diode bar to make it into a usable beam for standard delivery to industrial galvo scanners in a micro welding machine. The laser diode bar this lens was used with has a small lens glued on them. In short. It can make the beam from the raw diode like the one in a SP FC bar module behave like a laser poinnter's beam. It can also be used with FAC corrected red laser diodes up to 5W without a problem to make a very nice lightshow beam display laser. This item is very hard to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Indigo Optima Medical Laser System Coherent FAP Diode 808nm LS83F
For sale is a working Indigo Optima 808nm medical laser system. Model LS83F. This has a broken top case from something falling on it. It has been tested and passes all functional checks. Fiber not included. Inside there is a Coherent FAP diode on a TEC cooled heatsink, also a nice constant current driver. Likely not suitable for medical use anymore. Shipping via USPS Priority Mail to the US/International. Insurance is the option of the buyer.
|
|
|
Spectra Physics High Power DPSS Millennia 20W 808nm Pump Laser Diode Fiber Optic
This is a high powered fiber coupled laser pump diode. It is good for up to 15W delivered through the fiber. Typically they are used to pump DPSS lasers like the Millenia and Vector systems. This diode still has the protective end cap on the fiber tip which is unusual for a typical pulled part. It is likely this is either NOS or briefly installed and tested. Then immediately removed from service. The company I got these from upgraded their millenia systems to coherent Verdi systems. This item is extremely rare and esoteric, I have lots of lasers and other unique stuff for sale this week.
|
|
|
High Precision Coherent 12W 808nm Laser Array DPSS Pump Target Designator Module
This is a prototype long range IR target illumination module that makes 12W of 808nm in a CW or modulated laser poinnter like beam. It has 6 FAC corrected laser diodes that are knife edged. And collimated into a beam with a small telescope assembly. This laser assembly also uses 6 standard FAC lensed 808nm 2W emitters that are desirable for DPSS pumping. Power requirements would be about 13 to 15V at up to 2.5A. The good news is that this is on par with most common TEC drivers so building a driver for it should not be too difficult. I don't even want to think what this thing cost to build. This item is very hard, almost impossible? to find. I have lots of lasers and other unique stuff for sale this week.
|
|
|
Spectra Physics 40W 808nm 797nm Laser Diode Bar DPSS Pump Fiber optic coupled
Fiber optic coupled. Split into 2x20W outputs. Removed from working system but the fiber optic ends have damage and need reworked or the fiber assemble replaced or not used. Diode assemble needs to be screwed to a heatsink/cooling system.
|
|
|
10 watt laser diode 10w 808nm 808 nm infrared pump for green laser ktp yvo4 yag
10( Max) watt tested laser.Continuous operation with Active heat sink at 5 watt. also i will add one used 2 watt laser(used only for testing) Please its sensitive device so no returns. Specifications: Optical Wavelength(nm) 808, Wavelength Tolerance(nm) ±3, Operating Power(W) 10, Slope Efficiency(W/A) ≥1.1. Spectral Width FWHM(nm) ≤ 2, Spectral Width FW90%E(nm) ≤ 3, Fast Axis Divergence(90% Degree) 70, Slow Axis Divergence(90% Degree) 10, Wavelength Temp. Coefficient(nm/C) ~0.28, Electrical Threshold Current(A) ≤ 0.8, Power Conversion Efficiency( ≥ 48 Operating Voltage(V) ≤ 2, Operating Current(A) 5.0 ± 0.1, Thermal Operating Temperature(C) 15~35, Storage Temperature(C) 40~60, Recommended Heatsink Capacity(W) ≥ 6, 1. Data at the temperature of 25 degree C. Unless otherwise stated. 2. For fast axis collimation: Divergence o 3. Under ... morenormal operating condition. The lifetime of the diode is 10,000 hours.
|
|
|
20 watt laser diode 808nm peltier tec 300 watt fiber optic Lenz 20w laser head
This is 20 Watt 808 nm Solid State Laser diode With Heat Sink and Peltier Thermoelectric Cooling technology. Laser Diode is tested working and connected to Fiber optic.Peltier Thermoelectric is 250 Watt of cooling operating at 288 watt. Temp sensor is also attached to control feedback to temperature. I also added Lens( Basic Focus L1 lens. Attach Heat sink for Long operation. Operating voltage is 2.2 V for Laser Diode@ 22-26 Amp for 20 Watt output I found following details Parameter Conditions Min Typ Units CW Power Output 26A at 25˚C Heat Sink 20— W Operating Current 20W at 25˚C Heat Sink— 26 A Threshold Current 25˚C Heat Sink— 9 A Slope Efficiency 25˚C Heat Sink— 1.15 W/A Efficiency 20W at 25˚C Heat Sink— 45% Number of Emitters— 46 Emitter Size— 80x1 µm Emitter Pitch— 200 µm Center Wavelength 20W at 25˚C Heat Sink— 808 nm Wavelength ... moreTolerance 20W at 25˚C Heat Sink— +/3 nm Spectral Width 20W at 25˚C Heat Sink— 1.8 nmd
|
|
|
Oclaro 32 watt 808nm Laser Diode DPSS BPC808-32 Burns Spectra Physics
32 Watt Diode Actual operating specifications will be with in 15% of the Specification Chart below. The 32 watt diode specs are in the third column. Every diode will be tested for power and wavelength prior to shipping to you. Description The Oclaro BPC808-32 laser diode has been designed to provide the high output power and high reliability required for both solid-state laser pumping and direct applications. The laser diode bars are mounted on an expansion matched submount onto a Cu block package providing very high reliability in CW and pulsed(1-Hz type)applications) applications. Applications § Solid state laser pumping § Direct applications such as material processing § Printing § Medical Features § Mounted 10mm wide laser diode bar § Passive 1" x 1" Cu block cooler § 30% Fill Factor(150µm ... moreemitter/ 500µm pitch) § 32w operating power § Highly reliable single quantum well structure § Telecom grade AuSn mounting technology § RoHS Compliant BPC808-20 BPC808- 32 for ref purp Wavelength 2 808 ±3 nm 808 ±3 nm Typical Spectral Width(FWHM) Maximum Spectral Width(FWHM) 5 nm 5 nm Output Power Po 3 20 W 32 W Operating Current I op 4 30 A 54 A Maximum Operating Current I op 34 A 60 A Threshold Current I th 5 7.9 A 9.9 A Maximum Threshold Current I th 9.0 A 12.0 A Number of Emitters 19 19 Typical Conversion Efficiency 35% I op 35% I op Typical Beam Divergence 90% of rated power within 14° cone angle(0.12 NA) 90% of rated power within 14° cone angle(0.12 NA) Electrical Maximum Operating Voltage 2 V 2 V Maximum Reverse Voltage 3 V 3 V Maximum Negative Current 25 µA 25 µA 1. Centroid wavelength@ 25°C thermistor temperature 2. Guaranteed minimum optical output power 3. Typical operating current required to achieve P o 4. Typical threshold current Typical wavelength temperature coefficient: 0.20-0.30 nm/°C Powered by The free listing tool. List your items fast and easy and manage your active items. 643.RcmdId ViewI
|
|
|
Oclaro 20 watt 808nm Laser Diode DPSS BPC808-20 Burns Spectra Physics
20 Watt Diode Actual operating specifications will be with in 15% of the Specification Chart below. The 20 watt diode specs are in the second column shaded green. Every diode will be tested for power and wavelength prior to shipping to you. Description The Oclaro BPC808-20 30% fill factor laser diode baron passive cooler series has been designed to provide the high output power and high reliability required for both solid-state laser pumping and direct applications. The laser diode bars are mounted on an expansion matched submount onto a Cu block package providing very high reliability in CW and pulsed(1-Hz type)applications) applications. Applications § Solid state laser pumping § Direct applications such as material processing § Printing § Medical Features § Mounted 10mm wide laser diode bar § Passive 1" ... morex 1" Cu block cooler § 30% Fill Factor(150µm emitter/ 500µm pitch) § 20W operating power § Highly reliable single quantum well structure § Telecom grade AuSn mounting technology § RoHS Compliant BPC808-20 BPC808- 32 for ref purp Wavelength 2 808 ±3 nm 808 ±3 nm Typical Spectral Width(FWHM) Maximum Spectral Width(FWHM) 5 nm 5 nm Output Power Po 3 20 W 32 W Operating Current I op 4 30 A 54 A Maximum Operating Current I op 34 A 60 A Threshold Current I th 5 7.9 A 9.9 A Maximum Threshold Current I th 9.0 A 12.0 A Number of Emitters 19 19 Typical Conversion Efficiency 35% I op 35% I op Typical Beam Divergence 90% of rated power within 14° cone angle(0.12 NA) 90% of rated power within 14° cone angle(0.12 NA) Electrical Maximum Operating Voltage 2 V 2 V Maximum Reverse Voltage 3 V 3 V Maximum Negative Current 25 µA 25 µA 1. Centroid wavelength@ 25°C thermistor temperature 2. Guaranteed minimum optical output power 3. Typical operating current required to achieve P o 4. Typical threshold current Typical wavelength temperature coefficient: 0.20-0.30 nm/°C.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d
|
|
|
808nm laser lens set of TWO!!! HIGH POWER AR coated
Here for sale pair used optical blocks collimating lenses for high power 808nm laser. I measured transmission on 808nm. Through two blocks penetrate not less 95% of input 808nm power! Each of block contains 3 high quality coated glass lens. Was extracted from well known B&W TEK 473nm laser head. I have no another information about this components. Please look carefully pictures. All sales are final. AS IS. No returns no refunds. The buyer pays item and shipping cost. All import duties are paid by the buyer. I will ship internationally via AIRMAIL SMALL PACKET($12 anywhere in the world) Thanks for looking)
|
|
|
CB01L163Z Line beam 30:35w,808nm (LIMO Wavelength 780-1000nm max.Power 500W)
what you are bidding or buying ONLY 1 psc LEISTER Laser light source USED( CB01L163Z Line beam 30:35w.808nm(LIMO Wavelength 780-1000nm max.Power 500W) CLASS IV LASER PRODUCT Payment: We accept PayPal or Bank transfer or WU Payment must be made within 5 days after the end of auction. Unpaid dispute will be filed to eBay for any non payable bidders. Shipping: We only ship to your confirmed Paypal address. Please make sure your Paypal shipping address is correct before purchase. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. All items shipped with careful packaging to protect and ensure saftey of contents during shipment. Most ... moreorders will be shipped out within 1-2 business days upon payment confirmation. Shipping time: 7-18 days United States.United Kingdom, Australia, Canada, Singapore, New Zealand, Japan, South-Korea. 10-30 days France.Germany,Switzerland,Sweden,Denmark,Belgium,Ireland Terms of Sale: All our items come with one 14 days warranty. Please feel free to contact us if you are not satisfied with the purchase. Contact Us: Negative feedback can not solve anything. If you have any problems. We are very glad to help you. Please allow us to reply your email within 24 hours. Please contact us through ebay message(welcome) or Emai Check out our eBay store for other similar items. amoj1010 Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-147bbcbe0ff-0x111-
|
|
|
Opto Power OPC-A001-FC/100 1w Burns 808nm single emitter fiber coupled
THE FOLLOWING IS FROM Sam's Laser FAQ. Copywrite The first unit I dissected is typical of 0.5 to 1.5 W fiber-coupled diode lasers. Refer to and while reading the following description. WARNING: The output beam of high power laser diodes with an attached microlens(or other collimating optics) is much better collimated than we are used to for laser diodes- closer to that of a"real" laser. The divergence(total at the half power point) is typically 10x4 degrees as opposed to 10x40 degrees for a bare laser diode. What this means is that both the direct beam and any specular reflections are MUCH more dangerous to vision even several feet away from the source. Even the reflection from a shiny IR detector card can be dangerous. This is especially scary for people who have become complacent working with laser diodes being used to beams ... morethat spread out to safe levels in a few inches. The overall package is 1.5"L) x 0.75"W) x 0.5"H) and is made of a block of gold plated brass with a milled cavity. There are red and black wires for power and a single-mode fiber with SMA 905 connector for beam delivery. After prying off the Epoxied lid. The following can be seen: The laser diode is an open heatsink device similar or identical to the Spectra-Physics(now Newport) Prolite SCT open heatsink semiconductor laser. Go to and search for"Prolite SCT" It includes reverse polarity protection in the form of a second laser diode chip wired in parallel with the primary laser diode. It may actually lase if driven with enough current but since it's mounted upside-down and there is only one bonding wire. It would probably fail at a relatively low drive current. The beam also isn't anywhere useful. The heatsink is fastened to the case with a 2-56 cap screw. In between is a metal thermal washer(probably indium, no silicone) Multiple gold bond wires connect the laser diode to a ceramic circuit board just for connections to the external power supply wires(there are no components on the circuit board)
|
|
|
Coherent 1057693 40W 808nm CCP Laser Diode For CCP 19 Emitter DPSS Pump #287
Coherent 40W 808nm CCP Laser Diode Made by Coherent. Part number 1057693. Compatible with CCP 19 Emitter High Power DPSS Pump. For sale is the item described in this listing. No additional accessories included. 30 days warranty is included with purchase. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if we can. ... moreAll sales are final. Please understand that this is an auction/liquidation environment, not a retail store, so make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is no extra cost to
|
|
|
Diode 808nm + Elight laser hair removal machine Best 2in1 permanent hair removal
Tattoo ink laser tattoo machine IPL machine RF machine Elight machine Multifunvtional Gutiar Contact, Shipping, | | | | | Company, Normal 0 7.8 磅 0 2 false false false Our company is committed to providing customers with inventive. High quality products and it is a specialized that produce the tattoo ink.We can supply different type.Different color,different capacity ink.Our base is one of the largest production base and we sell the tattoo ink many years.Our products have ISO13485 and medical CE.They are exported abroad.We accept the wholesale.We also represent tattoo machine, tattoo accessories(tip power,Tattoo needle Etc. and the(IPL) machine,RF)machine,Elight and so on.We can offer you high quality, cost-effective products together with best service and technical support. Hope to build long-term business relationship with you.In summary, ... morewe will provide best service for you. Description, Welcome to visit our shop! Diode 808nm + Elight laser hair removal machine E-LIGHT Treatment People who are allergic to light. Pregnant women.Diabetes suffers,cardiac patients,people with Hypertension,Epilepsy and skin cancer. People with cardiac pacemaker and defibrillator. People whose treatment parts are damaged. People are just back from the beach.The skin is very weak after the exposure in the sun in this time. People have taken some photosensitive food or drug recently. Theory of Diode 808nm laser The System use special laser with long Pulse-Width 808nm. Can penetrate to hair follicle. Using selective light absorption theory. Laser can be preferentially absorbed by the melanin of the hair and then heating the hair shaft and hair follicle. Moreover to destroy the hair follicle and oxygen organization around hair follicle. When laser outputs. System with special cooling technology, cool the skin and protect skin from being hurt and reach a very safe and comfortable treatment. Elight technical parameter Elight part Display 8.4 inch touch display Stand ard handle 13*30mm( 15x50mm optional) Energy 1-50J/cm2(IPL) 1-50
|
|
|
Mounted High Power 808nm 50W Coherent FAP Laser Diode Collimator Lens SMA
Up for grabs is an: Extremely Rare FAP COLLIMATION LENS ASSEMBLY in MOUNT! This is a nicely made lens that screws onto a Coherent 808nm 50W FAP laser diode block or onto a delivery fiber. The laser this is used with looks like a gold block with a SMA connector on one end. It makes it from a flashlight like 60 degree spread to a beam that can be used with normal optics. It will make the beam into a much more manageable spot useful for heat treating and other uses. The base of the lens has scuffing from a failed removal attempt. But it is still usable, the optical surfaces are fine. I have lots of lasers and other unique stuff for sale this week.
|
|
|
LOT. TDK 60A Laser power supply, high power laser 808nm, crystals, optics. SALE.
Here for sale my laser hobby. SALE. Lot includes: One great and rare TDK VAX06-60RS regulated CC CV power supply. Output 6V max. 60A. Works fine. Any country input voltage. GUC One laser diode. Probably 30.40w, 808nm(tested for green lasing) Tested in 40 Amperes. GWC. Burns. Mounted in base from B&W TEK laser and screwed to huge aluminium heatsink. Also I put(all what I can find) other details for this laser housing(look pictures) Lost one gum ring and all screws. One unknown exotic IR laser with 10mm wide single emitter. Tested with 10A. Working. From numbered picture: 1. Laser shutter. Aperture 6mm, driving voltage 12V. Has a switches to know a position. GWC. 2. Two pair of glass focusing IR 808nm lenses. Taken from B&W TEK laser 473nm. EUC. 3. Pair of glass anamorphic prism coated for 808nm from B&W TEK laser. Using for beam ... morecorrection. EUC. 4. Crystal from 593.5nm laser pointer 2x2x10mm. Bad coating + output laser mirror in GUC. 5. Two rare one-side metallized TEC. 30x30x3mm. Takes 1.4A at 6V. I think can much more. GUC. 6. 15x15 small TEC glued in aluminium alloy base. GUC. 7. DC/DC converter. 9 Amperes. Regulated output. Type = PT6601D 8. ND:YAG crystal 2x2x12mm. Coated for transmission 1064nm. Was tested. Working. EUC. 9. ND:YVO4 from 593.5nm laser pointer. Approx 3x3x2mm. GUC. 10. Pair of high quality cylindrical lenses. One frameless(plano-concave) 15x25mm. One glued in anodized aluminium frame(plano-convex) same size. EUC, like new. Was used in IR device. 11. EREM 776E cutters. Very sharp. Length 105mm, blade 9mm. 12. 0.5 mm thick STAEDTLER permanent industrial marker. All that you see in photos. But isn't listed here, isn't on sale! And not included in lot. Please pay via PayPal within 3 days after end of auction or contact me for details. Please look carefully pictures. All sales are final. AS IS. NO returns NO refunds. The buyer pays item and shipping cost. The buyer pays all import duties. I will ship internationally via AIRMAIL PARCEL SERVICE($90 anywhere in the world) Thanks fo
|
|
|
Osram high power laser diode array Unique 808nm DPSS 300+ Watt
One of a kind Osram R&D laser array. 8 high power liquid cooled lasers in one array 10mm wide emitters. I have tested each laser diode to as I removed them. They glow nicely but I don't have a driver capable of bringing them up to threshold. They appear to be 808-810nm from years of observing these things but I can't guarantee this. These can be anywhere from 30-100 Watts each. My best guess is 40-50 Watts X 8. Osram currently has nothing like these available on their site. I took it all apart for inspection in an anti-static work station carefully not touching the emitters. And found that there is some residue in the coolant chambers in the diodes as seen in pics. This is worse near one end of the array and gradually dissipates. That must be the hotter exit end. This will not interfere with its function as the residue does not ... moreseem to come off easily. All the emitters are in perfect condition. I inspected under my microscope. There are 3 holes for the coolant. There was an un-tapped hole on each end of the array which didn't seem very functional for the layman. I tapped the hole in the plastic end and added a hose fitting. The opposite end hole is in stainless so I'll leave that up to you to tap if you wish. I inserted a brass tube in there for testing. It's a pretty tight fit. You can remove this with pliers or add a little epoxy around it or figure a way to plug this as there is another hole on the back side. this one came tapped with a screw/plug. But was the same size as my hose fitting so I will include a couple fittings with the unit. I will mark the correct polarity before sending. Thanks for looking
|
|
|
800 mw 808nm Laser - Inferred Laser
800 mw 808 nm Inferred Laser. Includes Driver has about 1 hour total use time. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14a28ca73a5-0x106-
|
|
|
Denmat laser safety glasses goggles 808nm
Used laser safety glasses from Denmat. They are rated 795 to 820nm. VERY IMPORTANT: The right lens has a crack! I have taken pictures of this crack. If you win this auction. Inform me that you are aware of this crack before I ship the glasses. $10 shipping no international
|
|
|
Coherent 40W 808nm Laser Diode 1273368 DPSS Bar CCP Cutting Burning / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Coherent 40W 808nm Laser Diode 1273368 DPSS Bar CCP Cutting Burning/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Coherent 40W 808nm Laser Diode 1273368 DPSS Bar CCP Cutting Burning/ Warranty Used Condition Coherent CCP Conduction Cooled Package Laser Diode Single Bar Module. Part No. 1273368. Coherent 40W 808nm Cutting Burning Solid-State Pumping DPSS Pump High Power Laser Diode Bar Module. Fast/ Safe/ Free Shipping within the Contiguous U.S. Inventory Number: 4K83288-01-15 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is ... morewhat you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However l
|
|
|
Coherent 40W 808nm Laser Diode Bar 19-Emitter DPSS Pump High Power / Warranty
Payment Policy New Page 2 Brand New Sony CyberShot 8 MP Di Coherent 40W 808nm Laser Diode Bar 19-Emitter DPSS Pump High Power/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Coherent 40W 808nm Laser Diode Bar 19-Emitter DPSS Pump High Power/ Warranty Used Condition Part No. 1057693 Fast/ Safe/ Free Domestic Shipping Coherent 40-Watt 808nm Conduction Cooled Diode CCP Single-Bar Package for Solid-State Pumping. Medical, illumination, Direct-Diode Material Processing, Barning, Cutting, Reprographics and etc. CW Output Power: 30W- 40W Wave length: 808nm Inventory Number: 3J93497-01-14 Item Condition Used Condition Fast/ Safe/ Free ... moreDomestic Shipping Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping&
|
|