|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$3.99 Shipping Condition: Used Location: Shafer, United States The item is used but has been well-maintained and has no cracks or repairs. Switch is untested.
$21.90 Shipping Condition: Used Location: Holliston, United States Mixed lot of new and used shaper cutters carbide tipped. Rockwell shaper to 1/4” router bit adapter.
Buy It Now
Free Shipping Condition: Used Location: Milwaukee, United States OEM Delta 43-800 router bit adapter. Came with a 43-435 Delta 3/4 shaper bought new circa 2004. Router spindle never used. Will need the draw bar and ... morewrenches. As shown
Buy It Now
$14.13 Shipping Condition: Used Location: Millstadt, United States Condition - Good used condition. The repair was done very well. Can only be seen inside the jaw. Ensure the item will fit your needs. Approximate Weight ... more- 15 lbs. Forklift loading isFREE. Height - 7".
Buy It Now
Free Shipping Condition: Used Location: South Bend, United States Delta No. 43-941 ConcaveStyle CarbideTipped Shaper Cutter 3/4”Hole 1/2” Bushing. Condition is Used. Shipped with Standard Shipping.
$59.01 Shipping Condition: Used Location: Visalia, United States This is a Delta Versa-Feeder model 36-865. This is the older 1/4" hp stock feeder and it's considered superior to deltas current model. I listed ... morethis as"new other" since I don't have the original box but it's never been used and it's complete. Most of the items are still in the Delta plastic they shipped in. The unit is complete with no damage. Instructions included. I have it packed up for weight and shipping and I forgot to photograph it before packing. I am a hobbiest woodworker and an active member on many online woodworking forums. Please see my feedback and buy with confidence. Attached is a factory picture. Thanks. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146fde5fbd8-0x111-
$6.05 Shipping Condition: New – Open box Location: Fortuna, United States This Delta Milwaukee 35-224 3-Piece Molding Shaper Cutter Set is perfect for all your woodworking needs. Made in the United States, this set is brand ... morenew and comes in an open box. The set includes various cutter sizes to fit your specific needs. Crafted for use in CNC, metalworking, and manufacturing, this cutter set is ideal for woodworking supplies. The set is perfect for creating precise and intricate designs, making it a must-have for woodworking enthusiasts. Don't miss out on the opportunity to have this top-quality cutter set.
Buy It Now
Condition: Used Location: Willoughby, United States On eBay for over 16 years! We are a trusted seller with 100% feedback approval& high star ratings in all categories. We are honest in our listings. ... moreWe ask that you read the ad carefully. If you are not sure about an item please ask questions before bidding. To ask a question please scroll down to the bottom of the page on the left side and click on the"ask a question" link. We rarely answer questions on weekends and during holidays. We will reply first thing next business day. Thank you for looking at our items. Dan Batson, DGD Inc Shipping cost is by freight truck. Please email for a quote before bidding! Include zipcode& if you have a forklift or loading dock Delta DJ-20 8 inch. 1 1/2 HP Jointer. This jointer is in nice physical condition. Jointer powers on. I ran a board over it several times and had to readjust the table then it did a straight level cut. Runs smooth and plenty of power. It has a 115/230 volt single phase 1 1/2 horsepower motor. 115/230 means you can set it to run on regular house plug or 230, you can see how to set it to either voltage in the picture showing the specs plate for the motor. It is setup for 230 volt right now with a plug that looks like this( This unit includes the jointer, catalog#37-350(little older model that is made in the Delta Base, catalog#52-672, and magnetic motor starter, catalog#52-704. It is missing a knob for the table adjustment lever on the front(right) of the machine. I am selling this unit as I have described it. Shipping cost is by freight truck, please email for a quote. Include zipcode& if you have a forklift or loading dock or not. Click for more information about this nice item.Click to see an online manual for this nice jointer. This unit is big and will need to be truck shipped on a pallet. You can pickup this equipment in Springfield. MO at no charge. Email me for accurate shipping quote. When you email please include your zipcode. Commercial or residential address(home businesses do not qualify as commercial address) and if you hav
$8.50 Shipping Condition: Used Location: Peyton, United States I'm not sure what the part number is but this is for the ability to use 1/2" router bits. Greats shape
Buy It Now
$9.00 Shipping Condition: New Location: Freeland, United States THIS IS AN ALL NEW CNC MACHINED THREADED SHAFT AND KNURLED NUTS. FINGER NUTS, A D-SHAPED FLAT WASHER, AND THE 3/8-16 HEAVY HEX. NUT FOR SECURING THE STOP ... moreROD IN THE DRILL PRESS. BEFORE BEING BRIGHT ZINC PLATED FOR APPERANCE AND CORROSION.
Buy It Now
$3.99 Shipping Condition: Used Location: Shafer, United States The item is used but has been well-maintained and has no cracks or repairs. Older Version with Delta Stamped into bell housing.
Buy It Now
$9.62 Shipping Condition: Used Location: Washington, United States Hello, Here's two drill press quills, Jacobs chucks, and pulleys. The box they were in had writing on it that said Delta DP220 and Craftsman King Seeley, ... morebut if you're reading this you know more about them than I do. ¯\_(ツ)_/¯ Please look over the pictures to assess their condition. They will be packaged carefully, cheap shipping from here on Capitol Hill (they're heavy though!), and I always ship quickly. Thanks for looking!
6d 22h 57m 11s 0 bids
$15.00 Now
$12.00 Shipping Condition: New – Open box Location: Fort Worth, United States New legs with bolts to shaper 43 122 goes to top bolts underneath cast iron top .
Buy It Now
Condition: Used Location: Willoughby, United States DELTA SHAPER MODEL 43-373. IN EXCELLENT SHAPE. TWO SPEED 7000 AND 10.000 RPM. 3 HORESPOWER 220 VOLTS 3 PH. SERIAL#93618743. 325. QUESTIONS CALL JUSTIN ... more619-253-6499. YOU ONLY GET WHAT IS PICTURED AND DESCRIBED IN AD AND NOTHING ELSE. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $50.00 PACKAGING COST FOR LARGE ITEMS THAT NEED PALLETIZING OR SPECIAL PACKAGING. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. IF I CAN I TEST EVERYTHING BEFORE SHIPPING TO MAKE SURE IT WORKS BEFORE YOU GET IT. IF IT DOESN'T WORK WHEN YOU GET IT. IT IS YOUR RESPONSIBILITY TO REPORT IT TO THE SHIPPING COMPANY AND I WILL NOT BE HELD RESPONSIBLE IF YOU DO NOT. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR C
Buy It Now
$400.00 Shipping Condition: Used Location: Mancos, United States Giant lot of woodworking shapers cutters collars and more.
Buy It Now
$7.75 Shipping Condition: New Location: Freeland, United States The plate has holes spaced at 4.562” center to center to match the original rivet holes in the grinder motor housing. The Model number on the plate was ... moreintentionally left blank. Delta stamped this info in the plate but we preferred not to, based on the decal being in place on the aluminum backing.
Buy It Now
$150.00 Shipping Condition: Used Location: Corvallis, United States And it is 13 in. high -- 115 VAC 9 amp 60 cycle - 3/4 hp -- includes a heavy duty miter gauge and original rip fence [no rails found with this unit] --.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, TILT TABLE CASTING. NO CRACKS OR REPAIRS.
Buy It Now
Condition: Used Location: Dalton, United States Swing: 14". Fully Functional! Complete w/ NEW Toshiba Motor! It is imperative that you provide all pieces of information! Local pickup is available as ... morewell. Can you believe our price?.
6d 23h 40m 5s 0 bids
$28.00 Now
$35.00 Shipping Condition: New – Open box Location: Fort Worth, United States Delta shaper 43 122 table support with pulley guard and bolts new old stock.
Buy It Now
$28.57 Shipping Condition: Used Location: Salem, United States Delta Milwaukee Homecraft 31-200 8-1/2" Disc Sander This is the sander as it was sold as an accessory to the Homecraft combination machine"Deltashop" ... moreComplete with the no. 5400 arbor pulley. Appropriate v-belt and the base that fits the table saw's blade opening. As such it does not include a stand or motor. But would be fully functional installed on a stand with a motor. It also does not include the accessory miter gauge or table saw arbor pulley. That pulley is being auctioned simultaneously. See photos for condition. It is fully functional but does show use and age. Watch my auctions over the next few weeks for a variety of other Homecraft machinery parts. I will combine shipping when feasible.
Buy It Now
$20.93 Shipping Condition: Used Location: Waterford, United States DESCRIPTION: USED. DELTA ROCKWELL TOOL REST BASE FOR THE 12" LATHES. IT USES 1" DIAMETER TOOL RESTS. CLICK ON THE" SHIPPING AND PAYMENTS" ... moreTAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER
Buy It Now
$99.99 Shipping Condition: Used Location: Lombard, United States Used condition with dings dents and scratches to the base. Some surface rust spots. Missing ID tag. Please see photos for details. Thanks for looking ... moreShipping price to the lower 48 only
Buy It Now
$50.13 Shipping Condition: Used Location: Morrow, United States Delta Unihead, Universal Grinding Indexing Head, Made in USA. spins, other than that, I cant use or test it. comes with the chuck
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This also includes a new keyway. I have modified this pulley to work on the 22-560/580. You will not have the arbor holding notches on this pulley. It ... morewill get your machine up and running again though.
Buy It Now
$39.99 Shipping Condition: Used Location: Waterford, United States USED, DELTA ROCKWELL OUTBOARD LATHE TURNING STAND STAND BASE. THE TOP FITTING THAT HOLDS THE TOOL REST IS MISSING. LOOK AT THE PICTURES.
Buy It Now
$10.75 Shipping Condition: Used Location: Salem, United States Drill press table support bracket. I believe this is an early Delta drill press table support bracket. But it might also be for a Walker Turner, Buffalo ... moreForge Drill or Atlas press. The casting numbers on the matching drill press column clamp read D.D.P. 62, this part came from the same drill press but isn't included in this auction. The casting number on this I believe reads 1. The bracket fits a 2-3/4" column/ post. Returns accepted. Will bundle multiple items for cheaper shipping.
Buy It Now
$22.47 Shipping Condition: Used Location: Salem, United States Delta Dp600 tilting drill press table- no column mount, Part# DP662.Fair condition, need cleaning, rust, markings, a few extra holes.
Buy It Now
$15.00 Shipping Condition: Used Location: Riverside, United States
Buy It Now
$12.84 Shipping Condition: Used Location: Salem, United States Excellent used condition vintage(50s) Delta Rockwell premium tool rest banjo. If you have the one that you need a wrench to adjust. This makes an excellent ... moreupgrade. Ships to USA only. I will combine shipping- buy multiple items and only pay the listed shipping cost of the highest shipping rate. Other items ship at no additional cost. I have several delta lathe accessories listed. Posted with
Buy It Now
$5.00 Shipping Condition: New Location: North East, United States Delta Moulding Cutterhead Knives, various part numbers and profiles. Choose which profile you need.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States It will clean up good. I use goo gone but I am out. Thank you for considering to support our family and small business. Words cannot express how grateful ... morewe are for your business no matter how big or small your contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$91.79 Shipping Condition: Used Location: North Ridgeville, United States shaper from woodworkers estate send offer
Buy It Now
Free Shipping Condition: Used Location: San Ramon, United States Vintage 6” RISER KIT DELTA ROCKWELL 14" BANDSAW W/ 15/16" DIAMETER ROUND POST in nice shape as shown. All original parts. Ready to use. Wood blade guard. ... moreFree shipping to all 50 States!!! Thanks, Steve
Buy It Now
$25.98 Shipping Condition: Used Location: Salem, United States Good condition, need cleaning, normal wear, no cracks or breaks, glass is in good condition.
Buy It Now
Free Shipping Condition: New Location: Holly, United States A08514 or 904166 Delta & Rockwell variable speed motor pulley (both halves).
Buy It Now
$11.62 Shipping Condition: Used Location: Salem, United States Good condition, need cleaning, normal wear.
Buy It Now
$22.75 Shipping Condition: Used Location: Salem, United States Good condition, need cleaning, normal wear, couple extra holes.
Buy It Now
Free Shipping Condition: Used Location: Pooler, United States Olympus Delta Workstation. -Delta Workstation. We strongly encourage you to study these images closely before you commit to purchasing the item.
Buy It Now
Free Shipping Condition: Used Location: Pooler, United States DP-4050-C 50Kv Unit. Olympus Delta Premium DP-4050-C XRF Analyzer. Rugged, High Performance Handheld XRF. The DELTA Professional with a 40kV tube and ... moreSDD detector is the best value solution from Olympus for handheld XRF analyzers.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States DESCRIPTION: USED. EYESHIELD FOR THE DELTA MILWAUKEE TRIPLE DUTY GRINDER. THE GLASS HAS A SMALL SCRATCH ON IT. NO CRACKS OR REPAIRS. THE SOCKETS DO NOT ... moreHAVE ANY WIRING OR BULBS. THE FRAME NEEDS TO BE PAINTED. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no. 1343852,crank handle for the Delta 22-540 type one and two, 22-560 type one, TP300, TP305 planers. A new OEM mounting screw is included. ... moreThe shaft size is 11mm. The mounting stud OD is 20mm and the height is 17mm.
Buy It Now
$6.00 Shipping Condition: Used Location: Chula Vista, United States Delta SBS-47 Wrench, Compound Slide Rest, Shaper, Etc. 7/16 & 9/16. 1 Per Sale.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ANSWER ANY QUESTIONS FREE ... moreSHIPPING TO THE LOWER 48 USPS FLAT RATE SHIPPING
Buy It Now
$15.35 Shipping Condition: Used Location: North Bend, United States Delta /Rockwell light duty shaper complete spindle cartridge.Good bearings.1/2” spindle with nut and 3/4” plastic reducers.See images for gnarling on ... moretop of the spindle. The threads are fine.See images for cosmetic flaws, stains, rust etc.
Buy It Now
$9.50 Shipping Condition: Used Location: Seattle, United States THREE (3) BITS OR CUTTER BLADE INSERTS PER BOX. BITS CUTTERS ONLY DOES NOT INCLUDE TOOL HOLDER. plus TWO (2) RICHARDS ENGINEERING CUTTER SETS.
Buy It Now
$16.95 Shipping Condition: Used Location: Salem, United States Good condition, need cleaning, normal wear, no handles, or internal gear.
Buy It Now
$28.27 Shipping Condition: Used Location: Waterford, United States USED, CAST BELT GUARD FOR THE SLO SPEED (BIG PULLEY) DELTA 14" DRILL PRESS WITH THE DP220 HEAD CASTING. THE MOUNT BRACKET HAS A CHIP OUT OF IT. IT STILL ... moreHOLDS ONTO THE FRONT PULLEY COVER. THERE ARE NO CRACKS OR REPAIRS ON THE BELT COVER SECTION.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States It will clean up good. I use goo gone but I am out. Thank you for considering to support our family and small business. Words cannot express how grateful ... morewe are for your business no matter how big or small your contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$24.63 Shipping Condition: Used Location: Salem, United States Delta Rockwell 10" bandsaw or 4" jointer stand. This is in very good condition. The stand has some light rust. Extra holes drilled in the bottom ... moreplate( for mounting the motor) All the bolts are included. Shipping is to the continental U.S. only. Payment is to be made within 5 days of auction close by Paypal only. Thanks for looking!
Buy It Now
$6.49 Shipping Condition: New Location: Grand Forks, United States This auction is for a Delta 4 inch Reversible Dust Chute. This Item is new in the box and never been used. This unit fits the Model#22-580 13 inch Two ... moreSpeed Finishing Planer. PayPal and US Shipping Only. Thank You and Happy Bidding.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States
Buy It Now
Free Shipping Condition: New Location: Murfreesboro, United States The chuck key is equipped with the spring loaded ejector pin to not allow the key to be left in the chuck. This is for safety to prevent accidentally ... moreleaving the key in the chuck and then starting the drill press making the key a projectile.
Buy It Now
Free Shipping Condition: New Location: United States The easiest and most efficient way to reset your blades, fits most planer blades. elta 22-540 guage for the Delta 12" portable planers (22-540) type 1 ... more& 2, and the TP300. THIS GAGE WILL NOT WORK ON ANY FULL SIZE PLANERS, 15" PLANERS, 13" PLANERS, 16" PLANERS, OR 20" PLANERS.
Buy It Now
$5.00 Shipping Condition: New Location: Freeland, United States This product line will be using similar decals, but each being partially clear. These decals will be adhered to either a stainless steel or aluminum plate ... morefor affixing to your Delta machine. There are 10 types of decals to choose from.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 1x LTA-516.
Buy It Now
$28.00 Shipping Condition: New Location: Freeland, United States We now have three styles of riser kits for the Delta 14" band saw. A ¾-10 x 8” bolt, lock washer, and nut for securing the top and bottom saw castings ... morethrough the riser block. The square headed bolt has been modified by adding a secondary key the bolt head to prevent rotation during tightening.
Buy It Now
Free Shipping Condition: New Location: Belleville, United States This is Delta no.1343868.
Buy It Now
$19.50 Shipping Condition: Used Location: Blaine, United States Excellent condition, not sure if it was ever used
Buy It Now
Free Shipping Condition: New – Open box Location: Glendale, United States Point Angle 90 Degree. TiAlN Coated. Coolant Through. Length of Flute 38mm (1.496").
|
|
|
|
USED/ JET WIDE BELT SANDER JWB25P, 3P.H. W/ DELTA DUST COLLECTOR
USED/ JET WIDE BELT SANDER. JWB25P, WORKING WIDTH 24" THICKNESS 1/8" 5" MAIN MOTOR 15HP, 220V/440V, 3 P.H. FEED MOTOR, 1 HP. 22-V/440V, 3 P.H. WEIGHT NET 1562 LBS. GROSS 2,046 LBS. 47"D X 51" W X 70" H. RUNS GREAT, EXTRA BELTS, MOUNTED ON TOP IS A DELTA DUST COLLECTOR FOR THIS UNIT, WITH PIPE FOR DUCTING, MANUELS ON SANDER AND DUST COLLECTOR, I HAVE WHEELS THAT MOUNT UNDER THE SANDER FOR MOVING BUT I DO NOT HAVE A LIFT OR FORK LIFT FOR RAISING TO INSTALL WHEELS OR FOR LOADING SANDER. THIS IS PICK UP ONLY ITEM, SELLING DUE TO HUSBANDS DEATH AND CLOSING CABINET SHOP. ANY FURTHER QUESTIONS PLEASE FEEL FREE TO ASK, I WILL TRY TO ANSWER ANY CONCERNS OR QUESTIONS. On Mar-21-13 at 08:34:41 PDT. Seller added the following information: PLEASE NOTE THIS IS PICK UP ONLY. AND I DO NOT HAVE EQUIPTMENT TO LOAD IT. I added ... moresome more pictures of the dust collector. I was trying to put more showing the wheels for the sander and the extra belts and some others of the dust collector but I can only post 12 pictures if you need more contact me with your email address and I can send them to you. If you are interested in these items separately I will sell the dust collector for 100.00 and the Sander for 2000.00.
|
|
|
ROCKWELL DELTA COMBINATION 6X48 BELT AND 12" DISC SANDER WITH TILTING TABLES
BUY IT NOW NO WAITING. ROCKWELL DELTA COMBINATION 6X48 BELT SANDER AND 12" DISC SANDER. WORKS GOOD. HAS TWO TILTING TABLES NO MARKS OR RUST. 1.5 HP 230-460 VOLTS 3PH. MISSING TOP COVER FOR BELT SANDER DOESN'T AFFECT ITS ABILITY TO OPERATE. YOU GET WHAT IS PICTURED AND NOTHING ELSE. PAYPAL TAKEN. QUESTIONS CALL JUSTIN 619-253-6499. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $ 50.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING ... moreYOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS, WITH OUT LIMITATION, ANY
|
|
|
VINTAGE DELTA MILWAUKEE 6 x48 BELT SANDER
Item Details Item Information Item Name: VINTAGE DELTA MILWAUKEE 6 x48 BELT SANDER Item# 10037 Price/Each: $495.00 Year: Brand Name: DELTA MILWAUKEE Model: Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description VINTAGE DELTA MILWAUKEE 6 x 48 BELT SANDER 6" WIDE BELT 1 HP 220/440 VOLT 3 PHASE DIMENSIONS: 56"H x 19"W x 24"L- Contact Us About This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including ... moreshipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred in tr
|
|
|
DELTA SHOPMASTER MODEL SA446 4" BELT 6" DISC SANDER W/ MANUAL
This is in very nice used condition and works great and comes with the original manual.
|
|
|
BELT SANDER BOTTOM SHIELD FOR DELTA 6X48 BELT DISC SANDER SANDER MODEL 52-611
BELT SANDER BOTTOM SHIELD FOR DELTA 6X48 BELT DISC SANDER SANDER MODEL 52-611 USED BELT SANDER BOTTOM SHIELD FOR DELTA 6X48 BELT DISC SANDER SANDER MODEL 52-611.
|
|
|
DELTA CAST IRON DRIVE BELT COVER $25SHIPPING TO LOWER USA
DELTA ROCKWELL DRIVE BELT COVER. CENTERS MEASURE 19in, OVERALL IS 26in. $25.00 SHIPPING TO ANY LOWER U.S.A. LOCATION
|
|
|
DELTA BELT disc sander BADE ARBOR FROM BELT DISC SANDER 31-730f
DELTA BELT disc sander BADE ARBOR FROM BELT DISC SANDER 31-730f USED DELTA BELT disc sander BADE ARBOR FROM BELT DISC SANDER 31-730f. THE GAURD WAS TAKEN OFF OF A DELTA BELT DISC SANDER MODEL 31-730F PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE GAURD.
|
|
|
Delta Bench Top Oscillating Boss Sander Model 31-780 1/4 HP
Delta Bench Top Oscillating Boss Sander Model 31-780 1/4 HP Description. Delta Boss Spindle Sander Lightly used item in very good working condition Hasn't seen much use. Cared for properly Comes with all accessories shown on sander 1/4 HP. 1725 RPM Model number: 31-780 Local pickup is available for this item as well 120 VAC. 3.5 Amps
|
|
|
Delta Rockwell 12 Disc and 4x52 belt sander combo restored
12 inch disc and 4x52 inch belt. All pieces professionally powder coated and reassembled with new bearings. New graphite on platen. Includes 5 new 80grit belts. NO motor or stand. Tracking has to be adjusted. I hate to see this go. But really need the space more than the machine. My loss is your gain. For pick up in Milwaukee WI. Will store with payment for up to one month.
|
|
|
DELTA 31-390 48" DOUBLE SIDED EDGE SANDER, 220 SINGLE PHASE
USED DELTA 48" DOUBLE SIDED EDGE SANDER. IT IS MODEL 31-390 AND IS SINGLE PHASE 220. THE MOTOR SAYS: 60-055 4VAL145TBFR5529DF HP 2 RPM 1730 VOLTS 230 AMP 10 Hz 60 PH 1 THIS WAS PULLED FROM A WORKING ENVIRONMENT. THIS IS A LOCAL PICKUP OR BUYER TO MAKE SHIPPING ARRANGEMENTS. ITEM IS LOCATED IN HAVEN KS 67543. EMAIL OR CALL 316-209-6001. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e6aca2586-0xfe-
|
|
|
DELTA 6" DIAMETER X 9" PNEUMATIC SANDING DRUM WITH 1" ARBOR HOLE
DELTA 6" DIAMETER X 9" PNEUMATIC SANDING DRUM- 1" ARBOR HOLE- USED LIKE NEW CONDITION-LOOKS LIKE THE SANDING SLEEVE SANDED ONE ITEM OR SO-AS PICTURED- AS- IS- Shipping to the lower 48 will be $14.50. PayPal preferred. Please click on"other auctions by Seller" to see my other items I have listed. Thanks. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Gothenburg 2026 Oscillating Spindle Sander delta grizzley jet professional sand
this is a nice used spindle sander has many different plates has from 1/4" to 3" spindles also has a box full of new and used paper can pallet up and ship most anywhere for under $200 if you have any question just ask thanks
|
|
|
DELTA 31-460 4" Belt / 6" Disc Sander Phase1 HP 1/3 120V +extra discs & belts
Delta 4" Belt 6" Disc sander 31-460 with extra parts This Delta 4" Belt/ 6" Disc sander 31-460 SN# R8929 1/3 HP. 3450 RPM, Phase 1, 120 Volts, 4 Amps, 60 Hz It is working, it does NOT come with the bench(just the belt/disc sander) I know from receipts that on 10/11/03 timing belt was replaced… NOTE the safety shield/ cover on the end of the belt area is cracked/broken off… it will sit there. But is NOT attached, see close up pictures. Overall dimensions Width 21" x Depth 16" x Height 11" Table NOT included See more pictures here: smartresale.com/Commercial_Items_FOR_SALE.html More pictures upon request. Ask all questions before committing to buy! We require cash upon pick up. Please bring additional help/ hands/ people to assist with loading. Feel free to contact us any time! SquareTrade © AP6.0
|
|
|
Delta Milwaukee 6x48 belt sander lower drum
Up for bid is the lower drum assembly off of a Delta Milwaukee 6x48 belt sander. Item is in great condition. Please ask questions before bidding. Thank you.
|
|
|
Delta Backstand Idler belt grinder Sander
Delta backstand idler. Missing one special nut. Costs 8 dollars to replace. Some marring and minor flats on the idler itself. 4 inch idler. Pictures by the weekend. Posted with
|
|
|
Timesaver Model 137-HD 36" Wide Belt Sander Furniture Cabinet Shop Planer Delta
Up for your consideration is a Timesavers Model 137-HD 36" belt sander serial#19404T. It has a Leeson 3 phase 20 hp 1760 rpm 208-230/460 volt. 53-48/24 amp motor serial#U74201772. The sander is currently wired 460 volt 3 phase. To test it I changed it temporarily to 208 volt 3 phase as my warehouse does not have 460 volt. Both the sander motor and the feed motor work fine. I did not run a board through as I was not sure if everything was set up properly. It has a pneumatic belt tensioner and it works fine as well. It does have some scratches, and the rubber boots on the table lifting screws need to be replaced, and some of the push buttons on the control panel are cracked(they still work fine) Please ask any questions you might have. Make sure to look at the other woodworking equipment that I currently have listed. I prefer this to be ... morepicked up and I will load on your truck for free. If you want to ship please make your own arrangements. But if you need help in this area, just ask. If it is going to be shipped I charge $40.00 for palletizing. If you have any questions you can reach me at 618-559-6011 and ask for Andrew or leave a message and I will get right back to you.
|
|
|
As Is Delta Power Equipment Corp 31-140 Disc Sander 1/2 Horse Power 12"
ebay template As Is Delta Power Equipment Corp 31-140 Disc Sander 1/2 Horse Power 12" Click for more Pictures As Is Delta Power Equipment Corp 31-140 Disc Sander. 1/2 Horse Power, 12-Inch PART ONLY/ NO RETURN/ NO EXCHANGE/ NO REFUND ~ Open Box Item ~ Brand: Delta ~ Model: 31-140 ~ Condition: ~ One of the legs is broken. And the motor case is dent, so the motor would not move. One of the knobs is also damaged. Please look at the last two pictures to see some of the damages on the sander ~ There are signs of wear/use on this sander ~ What’s included: Delta 31-140 Disc Sander FOR PART ONLY/ NO RETURN/ NO EXCHANGE/ NO REFUND ~ Please Review all the pictures ~ Retail Value: $380.00 ~ 100% Authentic! Specifics: ~ Please look at manufacturer's website for product details*The digital images we display have the most accurate color possible. ... moreHowever. Due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen. ~ Pictures indicate actual Item*Please click‘enlarge’ to see more pictures* HY-CH 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues before leaving us bad feedback. Business Hours: Monday- Friday 10:00am-5pm EST Local eBay Pickup Hours: Friday: 10am- 5pm EST and Saturday 11am-4pm EST(Buyers MUST present the Paypal receipt and photo ID upon pickup. OUR PHONE NUMBER: 770-623-1808 EMail: Please Contact us through eBay Message) Sorry. But we only answer emails and phone calls during our business hours. We offer a 14 day Money back or Exchange. EXCLUDING AS-IS/ For parts items. If there is a shipping damage. Please contact us as soon as possible so we can arrange return with shipping company. THANK YOU AND HAPPY BIDDING! Please bid only if you agree on our terms. Continentail US Shipping Only. Seller reserve the right to choose method of shipping without notice. No sale outside continental US. No
|
|
|
DELTA 1" Belt / 5" Disk Sander 31-080 Extra 1" Belt Woodworking, Metalworking,
Up for auction is one DELTA BENCHTOP 1" Belt/ 5" Disk Sander; includes extra belt. This Bench Top Sander is from my personal Shop; may have used it 10 times; works great; just doesn't work for what I produce. It's in Excellent Condition. Pictures are of actual DELTA Bench Top Sanders. Winner can pick this item up or I can ship it; will cost $25.00. If you are picking up sander; I require payment through PayPal after sale. In the past; buyer put me off for various reasons but in the end buyer never showed. Check out my feedback; I will be here. If you have any questions or need more pictures; contact me.
|
|
|
Delta 6" Belt / 9" Disc Sander 1-HP Open Stand w/ Manual No. 31-695
WE ACCEPT ALL MAJOR CREDIT CARDS Please call us for Direct Payments: 818) 241-2265 Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm We are located at 4587 Brazil St. Los Angeles. CA 90039 Local Pickup is also Welcome! DESCRIPTION Delta Open Stand Belt/ Disc Sander This unit was tested and found to be in excellent. Fully functioning order. Cosmetically, it is in great condition with normal signs of use. Please see my pictures for more details on the cosmetics of the item for sale. Part No. 31-695 ~ Information taken from the Manufacturer’s Website ~ Product Description The DELTA 31-695 6-Inch/9-Inch 1 HP Open Stand Belt/Disc Sander includes an adjustable 80-grit abrasive belt unit that operates vertically. Horizontally, at an angle, or can be removed for contour sanding jobs. The sander is powered by a 1 HP, 120-volt induction motor, ... morewhich runs a 9-inch disc sander that spins at 2,800 RPM. The 48-by-6-inch adjustable belt is kept in aligned by an easy-to-use belt tracking knob. It cycles at 2,200 square feet per minute across a graphite pad that reduces friction heat and preserves belt quality and life. The cast-aluminum worktable includes a miter gauge slot and tilts at 45 degrees for versatile surface work. The sander also includes a 2-1/4-inch dust port that connects to a standard shop vacuum and a steel stand with non-slip pads. Technical Details* Sander with an adjustable belt unit for vertical. Horizontal, and angled operation* 1 HP. 120-volt induction motor spins 9-inch disc sander at 2,800 RPM* Graphite belt pad reduces friction heat and preserves belt life* Measures 29 x 16 x 15 inches* Weighs 91.5 pounds_ Shipping: Due to the size and weight of the item. We are offering LOCAL PICK UP or FREIGHT SHIPPING- Please email us for freight shipping estimates- We ship worldwide! Salesbaron is in Los Angeles. 90039 SL PAYMENTS We accept PayPal and all major credit cards. Please contact us for direct credit card paymen
|
|
|
LOCAL PICKUP AS IS Delta Power Equipment Corp 31-140 Disc Sander 1/2 HP
ebay template LOCAL PICKUP AS IS Delta Power Equipment Corp 31-140 Disc Sander 1/2 HP. Click for more Pictures LOCAL PICKUP AS IS Delta Power Equipment Corp 31-140 Disc Sander 1/2 HP Brand: Delta. Model: 31-140. Features: Dust collection draws from under the table. 2 1/2in OD attaches quickly to any standard shop vac or dust collector Cast Iron Base with pre-drilled holes for easy bench mounting Condition: Open box. Item powers on but motor only hums(doesn't run) item is dirty but is in acceptable cosmetic condition for an item of its class. What you get: DELTA disc sander shown on images. Parts/accessories not shown are not included with this listing. Retail value: $379.99. THIS IS A LOCAL PICKUP ITEM. YOU OR YOUR PREFERRED SHIPPING CARRIER WILL HAVE TO PICK UP THE ITEM FROM OUR WAREHOUSE. Item location: Duluth GA. 30096. Item weight(pounds) ... more75.9. Item dimension(inches) 22 x 18 x 19. ITEM IS SOLD AS IS/FOR PARTS. NO RETURN/EXCHANGE/REFUND! ~Please review pictures for the actual item(s) What you see is what you get! ~Our listed products are 100% genuine. Specifics: Please look at manufacturer's website for product details* The digital images we display have the most accurate color possible. However. Due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and what you see on screen. ~Pictures indicate actual item(s) Please click"enlarge" to see more pictures* JL& EE 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues before leaving us bad feedback. Business Hours: Monday- Friday 10:00am-5pm EST Local eBay Pickup Hours: Friday: 10am- 5pm EST and Saturday 11am-4pm EST(Buyers MUST present the Paypal receipt and photo ID upon pickup. OUR PHONE NUMBER: 770-623-1808 EMail: Please Contact us through eBay Message) Sorry. But we only answer emails and phone calls during our business hours. We offer a 14 day Money bac
|
|
|
DELTA MOTOR cover door FROM BELT DISC SANDER 31-730f 13" wide x 19" opening
DELTA MOTOR cover door FROM BELT DISC SANDER 31-730f USED DELTA MOTOR cover door FROM BELT DISC SANDER 31-730f. THE door WAS TAKEN OFF OF A DELTA BELT DISC SANDER MODEL 31-730F PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE door.
|
|
|
Delta / Rockwell 31-730 Belt and Disc Sander + NO RESERVE!
Manufacturer: Delta/ Rockwell Model: 31-730 Belt and Disc Sander 4- 6" Sanding Belts Included! Condition: We do not know the working condition of this machine. This machine is being sold for a school. It was being used in the school's woodshop until they shut their shop down and declared this machine as surplus. Note: Please view our other auctions as we are selling many assets at NO RESERVE! Note: All items being sold for this school district are being sold AS-IS and for LOCAL PICK-UP ONLY. NO SHIPPING. There is a forklift that will be on site to assist with the removal of your item(s) REMOVAL: ALL ITEMS MUST BE REMOVED BEFORE JUNE 24th. WE HAVE 3 DATES SET ASIDE FOR THE ASSETS TO BE REMOVED AND THEY ARE: JUNE 19th. JUNE 20th AND JUNE 21st. ALL DAYS WILL HAVE THE REMOVAL TIME OF 8-3. THIS SCHOOL IS BEING DEMOLISHED ON JUNE 24th ... moreAND ANYTHING LEFT IN THE BUILDING WILL BE DEMOLISHED WITH IT. NO OTHER PICKUP DAYS ARE ALLOWED. Note: At the end of the auction. We will give the winning bidder the contact information for the administrator at the school(Holland, MI) in which all the assets are located. Once this information is received, it is up to the winning bidder to make contact and set up an appointment for removal. Please keep in mind that these items are being sold for a school district. It is not always easy to make contact. It is necessary to be persistent until you get hold of the administrator in charge. This is a great belt/ disc sander offered by Rockwell Delta. Perform jobs quicker with this two in one machine! 12" Disc Sander 6" Belt Sander Belt Table Size: 14" x 7" estimate) Disc Table Size: 14" x 7" estimate) Disc Size: 12" Belt Size: 6" x 48" Electrical: 230 V 1 PH*Item specs. were obtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items are being sold for Holland Public Schools are being sold As-Is. Powered by The free listing tool. List your items fast and easy and manage
|
|
|
DELTA 31-695 DISC SANDER 1HP 48"x 9" WOODWORKING MACHINE
BT# 14361 TJ-099.1Y You are looking for: DELTA 31-695 DISC SANDER 1HP 48"x 9" WOODWORKING MACHINE USED AND TESTED ITEM. IN EXCELLENT CONDITION! 30 DAYS WARRANTY! Manufactured by: DELTA. Additional info: DISC SANDER/ WOODWORKING MACHINE Model: 31-695 Motor: 1 HP. 120V, 60 hz, 1 Phase, 3450 RPM Abbrasive Belt Size: 48" x 6" 1219 x 152 mm) Disc Diameter: 9" 229 mm) Speeds: Belt speed: 2200(671 SMPM) Cast-aluminum table with miter gauge slot tilts 45° for bevel sanding and may be used on either the belt or disc unit. Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 5 business days We ship with: Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f14bf8aaa-0x100-
|
|
|
delta rockwell 6 X 48 BELT SANDER GUARD/SHIELD COVER
A Delta Rockwell 6 by 48 belt guard in good working condition. No rust I can see. Some marks on it from wear and tear. Measures 15" by 6 5/8" by 3/4"
|
|
|
Delta 12" Disc Sander - 3 phase
Delta 12" disc sander- 3 phase- works great! Local pickup preferred. Delivery negotiable in Maryland/Pennsylvania/Virginia/West Virginia. Freight is also possible- buyer pays shipping. Message me to discuss.
|
|
|
DELTA 18" -36" DRUM SANDER MODEL 31-250 1 1/2hp NR
Delta 18" to 36" drum sander in excelent condition. Includes a 1 1/2hp heavy duty motor and a 1/30hp. Variable speed feed motor. Runs on 115V. Steel stand, dust hood, manual and some extra sandpaper(60& 80 grit) This is a great little sander that I used to sand and calibrate thickness on the back, sides and tops of 4 or 5 acoustic guitars I built. Works great. Brand new sandpaper already installed, it does need to have the table raising/lowering belt tightened-look pretty easy. Pick-up welcome or I live just north of Atlanta and would be willing to deliver or meet within a reasonable distance(30 miles or so)
|
|
|
Oliver table saw Oliver planer Delta 31-396 Oscillating Edge Sander
NOTE: THIS LISTING IS ONLY FOR THE DELTA31-396 OSCILLATING EDGE SANDER. PICK UP ONLY. CASH ONLY OR USPS MONEY ORDER"NO PAYPAL, ONLY ACCEPTING PAYPAL IF YOU PAY THE FEES. Interested in starting your own cabinet shop! I have all the machinery needed, please see my other items.The Delta 31-396 Oscillating Edge Sander is used but in good working condition. Please copy and paste the following link for information for this item.cpodeltamachinery.com/delta-31-396-oscillating-edge-sander-with-spindle-sanding-attachment/dwwn31-396,default,pd.html?ref=bizrate31-396&zmam=31282435&zmas=47&zmac=493&zmap=31-396 The current pictures on the post are the best that I could get because the container(Size 8' X 20' is so full that I can barely move inside. We can set up an appointment for you to see items in person. Thank you. This ... moreitem is used and sold as-is. It was removed from an operating environment and placed in storage. NOTE: SHIPPING is NOT AVAILABLE for this item- LOCAL PICKUP ONLY. Due to the location of this item, this item can not be shipped. The item can be prepared for pickup. Item must be removed AS-IS. Buyer must pickup at location and must be prepared to remove the item at their cost and with their own resources.
|
|
|
Delta Model 31-460 is a 4" Belt; 6" Disc Sander -1/3 hp 120 Volt Single Phase
Here is a little used Delta Model 31-460 is a 4" Belt; 6" Disc Sander and comes equipped with; 1/3 hp 120 Volt Single Phase Induction Motor. Tilting table, miter gage, backstop, 4" x 36" 60 grit sanding belt and 6" 60 grit sanding disc. The tilting aluminum table can be mounted for use on either the belt or disc unit. Belt operates horizontal. Vertical and at any angle in between. The 3100 rpm disc and 2000 sf/m belt speed will handle just about any sanding job in hard and soft wood. to see more information check this link. Payment must be received by no later than two days of the auction ending.
|
|
|
Delta Rockwell 1x42 sander grinder platens manual
3 platens and one original manual. Two identical inch platen and a curved platen. No significant wear on the used ones. Sold as one lot. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13fa08b1839-0xff-
|
|
|
Delta 31-401 Tilt Table with Trunnion for Belt/Disc Sander 31-730
Tilt table for Delta upright belt/disc sander. Minor surface rust spots on face and rear of table. Trunnion has a broken bolt hole(see images) but will still function.
|
|
|
Delta Boss Oscillating Bench Spindle Sander
this is just the plastic base inc switch too Posted with
|
|
|
DELTA MODEL 31-460 TYPE 2 4" BELT 6" DISC SANDER
Up for sale is a Delt 31-460 disc/belt sander type 2. Item is in good usable condition and comes with manuel.Safety sheet and miter gage. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including ... morereturn shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked items the amou
|
|
|
Delta Mdl 31-695 9 in Disc 6 in X 48 in Belt Sander
From estate sale. Runs fine! Owner's manual.
|
|
|
Delta model 31-050 1 x 30 bench top belt sander with belts included
Delta bench top 1" belt sander. In excellent working condition. Two belts included. One medium(lightly used) and one coarse(brand new in pkg) jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13ff1211525-0xff-
|
|
|
Delta 6 inch belt sander 9 inch disk sander
Delta 6" Belt/ 9" Disc Sander performed well and was never really used. Original belt still on it with another belt to go with it. The 6" belt unit can be operated vertically or horizontally or any angle in between. 1 HP. 120-volt induction motor spins 9-inch disc sander at 2,800 RPM Measures 29 x 16 x 15 inches; weighs 91.5 pounds Some paint pealing and other scratches but overall a really good machine. Will need new belt put on that I have supplied and a new 9" disk that I do not supply. No square or guide with it.
|
|
|
Delta 6" Belt 9' Disc Belt Sander With Stand Local Pick Up Pk Ridge,IL
Available sander for local pick up in Park Ridge.IL. Comes with stand. Used approx. 10 times. Great Condition!
|
|
|
DELTA 6" X 48" SANDER TABLE - IT HAS VERY MINOR SURFACE RUST
I will gladly ship multiple items together as long as it is safe to do so. Please feel free to contact me for a shipping quote on combined items. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14019b18c8f-0xf3-
|
|
|
ROCKWELL DELTA 1" x 42" BELT SANDER GRINDER MODEL 31-355
Picked this up locally. Runs very smooth, it is in plug and play condition. I don't believe the belt guard/cover is an original, just a well made, home made one in very nice condition. The 2 small idlers are made from aluminum with roller bearings in them and are self centering. There are light scratches all over the machine from previous use. This machine will be shipped in a wooden box!
|
|
|
Delta Edge Sander , NIce
Delta Edge Sander Model 31-380. S/N 889050 1 ½ HP Single Phase 5” x 48” Platens 4” x 124” Belt 12” x 60” Tables Non Oscillating Inspect in Our Branchburg NJ Warehouse Questions Call Dave@ 908-399-8133.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-140a6006dd4-0x100-
|
|
|
Industrial Spindle sander oscillating sander heavy duty delta jet grizzly nice
nice used industrial spindle sander comes with 1/2" 3/4" 1" 1 1/2" 2" and 3" along with a box of paper sander is 220 volt 3 phase but can put a single phase motor on it if you have any questions please ask thanks
|
|
|
Delta Belt Sander & Disc Sander Parts in Box Appears New Delta Sander Parts
Delta Belt Sander and Disc Sander Table Top Parts Lot. This sander looks unused, I am not sure if it was never put together, or taken apart for some reason, I am also not sure if all parts are included, This is how I found it, The sander is being sold for parts, STUDY THE PHOTOS, Delta part# 31-460, Buyer pays all shipping costs, International shipping is offered, Please contact me with any questions or concerns, Thank you for shopping
|
|
|
Delta Disc - Belt Combination Sander Model #31-710
Delta Combination Disc/Belt Sander Model#31-710. Made in USA Vintage cast iron machine with steel base made way better than most today. 12" disc and 6" x48" belt. 1HP Delta motor. Newer models by Jet. Etc. start around $1,000 and are made in Taiwan/China. Currently has 9" aluminum disc but original 12" disc can be got for $45 and tension crank for $25 if you want, but it functions as is. Can restore fully for around $900, depending. Will sell as is for $400(plus eBay fees)Please/text call Jeff@ 818 793 4411Prefer pickup but can arrange deliver in multiple small crated boxes for a fee(approx $100) Contact me for shipping details or to see in person. On Sep-19-13 at 07:19:54 PDT. Seller added the following information: Motor: 1hp 1ph Delta 12" disc and ball crank are missing but on hold with source. Other parts ... moremissing- typical: cabinet access door. Idler drum guard, drive drum guard, and side belt guard. All are not hard to find.
|
|
|
DELTA ROCKWELL DUAL BELT GRINDING POLISHING DEBURRING SANDER 2-1/2" X 48" - RARE
Vintage Delta Dual Belt Grinding. Polishing, Deburring and Sanding Machine SN# 72-9439. I believe the sander was manufacture in the mid 1950's. The sander is currently running 2-1/2" x 48" belts and can probably run belts to about 60" in length or maybe just a little longer. Stout heavily built Master 220/ 440 volt motor 1 Hp three phase motor. The tracking of the sanding belts is easily adjusted by a simple belt tracking mechanism, the upper knob on each idler arm can be turned clockwise or counter clockwise to control the belt tracking. The sander is in good condition, and runs very well bearings in the motor and lower and upper sanding shafts are tight. There are no broken or cracked pieces, what might appear to be damage on the right side of the upper right main idler arm casting is just paint, not a casting imperfection, ... moreflaw or damage. Includes original paperwork/ sales brochure. The machine is missing one small black plastic ball end knob for the belt tensioning lever. And one metal post cap for one of the vertical support columns. Please confirm total weight and pallet size before paying.
|
|
|
Vintage Industrial Belt Sander Flywheel Pulleys DIY Kit 2x48 Kalamazoo Delta
This is a pair of pulleys that were used in conjunction with a motor and mounting surface to run a 2x48 sanding belt. Only the large 10" flywheel with 5/8" key center and the pully arm are included. No mounting surface or tool rests. These parts however are heavy duty industrial grade weighing about 40 lbs. The smaller pulley is 3.75" in diameter and both are 2.75" wide. They are not marked but the smaller pulley has Stephens Adamson sealed bearings. These could be remounted and with the addition of a motor. Make a fine sanding station either vertical or horizontal. The motor that was with it but is not included 3/4 HP 1725 RMP 5.3 Amp. for reference. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-1416dabbbd0-0x102-
|
|
|
Rockwell Delta 12" Disc Sander on Stand Runs Solid and Quiet
Up for grabs is a 12" Delta Rockwell disc sander. With a 1 hp motor which runs really strong and quiet and is 115/230 volt. The sander can be set up to collect dust although it does not have the down pipe. It has been painted and looks pretty good, but it was not done professionally. I prefer local pick up because I am not a machinery company, but I will ship freight with prior authorization from me prior to purchase. I will pallet, but there will be a $50 fee as to cover costs and the buyer must purchase the freight as well as coordinate the shipping from 93033. My guess is this unit weighs approximately 150-170 lbs and the dimensions are 43"h x 17" w x 25" d. Do not hesitate to ask any questions prior to bidding and if you would like to come test the unit please message me on Ebay so we can coordinate. Thanks for looking ... moreand good luck!
|
|
|
DELTA 52-611 DISC DISK BELT SANDER HOUSING
12" DISC HOUSING CAST IRON 16-02-054 2003 NO DAMAGE
|
|
|
DELTA 52-611 BELT DISC DISK SANDER TABLE BUILD YOUR OWN
TABLE ORIGNIALLY FROM MODEL 52-611 BARE TABLE ONLY. FEW STAINS ON TOP SURFACE NO"CRATERING" COULD BE SUITABLE FOR BUILD YOUR OWN WITH DIRECT DRIVE MOTOR PER FOLLOWING SPECS. 16 1/4 X 9 7/8 OUTSIDE DIMS"U" SHAPE CUT-OUT 12 3/16 X 2 3/4 4 BOSS PADS ON BOTTOM WITH 1/4-20 TAPPED HOLES
|
|
|
Delta Rockwell Belt Sander Trunnion Abrasive Finishing 6 x 48 drill saw jointer
Delta Rockwell Trunnion from 6 x 48 abrasive finishing machine machine serial 9-5409 part number cast into trunnion BS 207 includes U-shaped segment. Pointer, and set screws- ready for new set screws no cracks no repairs no welds no damage no undue wear machined areas are flat and undamaged trunnion is used to mount table to sander body all mounting ears in good shape- will include three mounting screws has been repainted by a previous owner can bolt on and use or clean and repaint to taste a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions ... moremust contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own
|
|
|
Delta Rockwell Belt Sander Idler Drum Bracket 6 x 48 drill saw jointer
Delta Rockwell Idler Drum Assembly from 6 x 48 abrasive finishing machine machine serial 9-5409 part number cast into trunnion BS 204 idler drum bracket. Two piece idler drum, idler drum shaft, and associated hardware bearings are present. Probably original, and should be replaced no cracks no repairs no welds no damage no undue wear machined areas are flat and undamaged has been repainted by a previous owner can bolt on and use or clean and repaint to taste only parts shown are included- look carefully at the pictures and ask questions internal parts also available- check other items for sale a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship ... moreonly to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Picture
|
|
|
Delta Rockwell Belt Sander Drive Drum 6 x 48 drill saw jointer
Delta Rockwell Drive Drum- lower from 6 x 48 abrasive finishing machine machine serial 9-5409 part numbers BS 219 S matched pair from same machine no cracks no repairs no welds no damage no undue wear bore OK- drums remain reasonably round with eyeball check has been repainted by a previous owner can bolt on and use or clean and repaint to taste only parts shown are included- look carefully at the pictures and ask questions a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal ... morerules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and research. Ask questions! I will offer whatever hone
|
|
|
Delta Rockwell Belt Sander Platen 6 x 48 drill saw jointer
Delta Rockwell Belt Sander Platen cast iron construction from 6 x 48 abrasive finishing machine machine serial 9-5409 part number BS 205 no cracks no repairs no welds no damage flat platen surface has some wear associated with typical use shallow divots and wear at table intersection remains fully functional has been repainted by a previous owner can bolt on and use or clean and repaint to taste only parts shown are included- look carefully at the pictures and ask questions a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before ... morebidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and res
|
|
|
Delta 31-460 4" Belt / 6" Disc Sander 1/3 HP 120V + 9 Belts - Some New Some Used
Delta Sander Model 31-460 4" belt 6" disc 1/3 HP Works great! A little dirty- could be cleaned pretty easily Comes with sander and belts as pictured 9 extra belts- some are new and some are used Posted with
|
|
|
Delta Rockwell Stand Flared Foot 50-406 band table saw drill sander bugle bolt
Delta Steel Stand flared foot bolt together construction 29" legs- top is 16" x 8" 15 proper bugle bolts nuts and star washers catalog# 50-406 or# 329 proper stand for Delta 6 x 48 abrasive belt sander finishing machine may fit others no cracks chips repairs or damage mounting holes in legs feet and tables added by previous owners buyer may wish to clean and/ or repaint to taste good sturdy stand with no"issues" shipping is for lower USA CONUS only other locations please ask- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before ... morebidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and research. Ask questions! I will offer whatever honest answers I can. Purchase price refunds/
|
|
|
8 1/2 " diameter sanding disc backup Plate Craftsman Rockwell Delta
8 1/2" diameter sanding disc backup plate. Has a 1/2" diameter removable shaft. Not sure of the make or what it's actually made for. The only markings are"Made in United States of America"
|
|
|
Delta 31-250 18x36 Drum Sander 9855-1
Delta 31-250 18x36 Drum Sander 9855-1-Catalog No. 31-250-Serial No. 02K84656-Made in the U.S.A. Specifications: 115 Volt-60 Hz-12.8 Amp-Singlt Phase-Type 2 QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not ... morerun. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Shipping Quotes: Send us your zip code and ship to address is it commercial with or without loading dock or residential. All quotes will be for street delivery. Due to the cost of fuel. Please ask for a freight quote. We do not mark up freight; we will add a handling cost to the quote. NJ Sales tax; Items delivered within the State of New Jersey are subject to a 7% sales tax. All shipments will ship to the confirmed address in the buyer's PayPal account. RETURN POLICY; Ret
|
|
|
Refurbished Delta Wood shaper Router. Good condition. 14 day money back guarraty
Founded by: Roger O. King I on July 1. 1970 Currently over 50.000 items in liquidation at our 100,000 sqft warehouse& on our website by clicking on Our Asset# KSC631/ 162 Qty available: 1 Gallery Photo Customer Service Contact below THERE IS NO FREE SHIPPING. EBAY IS FIXING AN ISSUE AND IT SHOWS FREE SHIPPING, THERE IS NO FREE SHIPPING ON THIS ITEM. IF YOU NEED A SHIPPING QUOTE YOU MUST EMAIL US VIA EBAY FIRST BEFORE PURCHASE, OTHERWISE YOU ARE AGREEING TO THE SHIPPING CHARGES UPON PURCHASE. Normal 0 false false false EN-US X-NONE X-NONE Appraised Value: $950.00 NEW REPLACEMENT COST OR WHEN NEW: Full Description or Background Unlike most auctioneers. King Surplus does not knowingly sell dysfunctional assets without disclosure. Nor do we hide behind an ASIS auction statement. However, please keep in mind that we liquidate ALL TYPES OF ... moreBUSINESSES and our warehouse personnel may not posses the expertise to properly assess the condition of an asset in liquidation. When possible, we will try to start up and run an item but our folks may not have to expertise to actually operate and asset. If possible we will attempt to get reliable back ground history from our client on assets. Such reports are their words not ours. We are simply doing out best to assist buyers with background info. Buyers must reply upon their own expertise regarding the purchase and application of all assets being sold. All assets are available for inspection at our locations. Inspection: 4. Used: Tested in our shop We are not dealers in the assets we sell so unfortuantly we can not help buyers with parts and functionality questions. Nor can KSC make any representations or guaranties as to functionality or fitness for a particular purpose. All assets in liquidation. Including those with a 14 day money back guaranty, are sold as is where is. We are liquidation/ auction professionals and go out of our way to inspect and fully disclose any faults we see. Liquidation Type: 14 Day Money Back Guarantee with Yellow Tag! YELLOW TEST TAG: When we are
|
|
|
DELTA ROCKWELL 6 X 48 BELT SANDER TABLE FROM MODEL 52-611
FROM MODEL 52-611 BUT I BELIEVE IT WILL FIT MANY OTHER DELTAS. PROTRACTOR + TABLE SHIPPED AS SHOWN. INCLUDES 7/16 STUD FOR LOCK-MOUNT TO FRAME. TOP TABLE SURFACE HAS THREE"RED" LINES + ONE OTHER SMALL AREA. THESE ARE MARKS(NOT CRACKS) SHALLOW"SCALLOP" AND 3 LONGITUDAL BLEMS. I WOULD GAUGE.015/020 WOULD GIVE 100% CLEAN UP. NO CRACKS. DAMAGE, LITE RUST ON BOTH PARTS AND SOME BLACK STAINING ON TABLE SURFACE. NOTE DIM'S FOR PROTRACTOR. 3 BOLT MOUNT. FOR REF. DIMENSIONS LISTED B/W CENTERS. DELTA CAST# ON BOTTOM 406-03-091-2001 NOT IMPORT MODEL PITTS, PA EMAIL WITH ANY?S.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14387c9fbf5-0x102-
|
|
|
DELTA 6 X 48 BLET DISC SANDER BELT GUARD
FROM MODEL 52-611 USA MADE OTHER MODELS SIMILAR SEE SKETCH FOR DIMS.
|
|
|
BELT SANDER BOTTOM SHIELD FOR DELTA 6X48 BELT DISC SANDER SANDER MODEL 31-730
FROM MODEL 31-730 THIS COVER FITS BACK OF 6 X 48 BELT. I BELIEVE IT FITS MANY SIMILAR DELTA MODELS BUT GO BY FOLLOWING SPECS. LITE CLEAN + PAINT IF DESIRED. MINOR MARKS- BELT DRIFT- COSMETIC ONLY SPECS. 15" LONG X 6 11/16 WIDE 11/16 SIDES WITH CUT-OUT SLOTS SEE PHOTO FOR DIM'S B/W CENTERS
|
|
|
DELTA 6 X 48 BELT SANDER UPPER DRUM MODEL 52-611
FROM MODEL 52-611 DRUM/DISC COMBO OTHER 6 X 48 MODELS? SPECS. 3 1/2 DIA. CROWNED" MADE IN USA CAST#406-03-014-2005 GOOD BEARINGS-NO DAMAGE- GUIDE BARS LITE RUST 1/2 X 1/4 ON ROLL PIN PIVOT. FULLY USEABLE TAKEN FROM GOOD RUNNING. TRACKING MACHINE On Jan-14-14 at 04:50:00 PST. Seller added the following information: REVISION MISTAKE ON THE MODEL# MODEL# 31-730
|
|
|
Vintage Table for a *DELTA Rockwell* 6 X 48 *Belt Sander Grinder* Real Nice User
This is a Table for the Classic DELTA Rockwell 6 X 48 Belt Sander Grinder. This table is in nice working condition, and would be a great'User' Or replacement! The three round holes drilled in it are tapped. I could see those. And the slot cut in it. As being very useful for jigs. Or guides. There's a'wear edge' Added to the back side, which is now itself somewhat worn. But it's easily replaceable. On the bottom. You can see where several steel blocks have been brazed. These are strongly. But not very neatly. Attached. At first glance. This looks like the repair; of a break. It's not. Though. The replaceable wear edge is fastened to those blocks; and that's why they were added. Actually. Not such a bad way to deal with the fact that this area of these tables always wears out. You can see. Though, that the table ... moreis overall flat and straight. With no significant marring to the working face. Let me know if you've got questions! Thanks! Local Pick-Up is available, and encouraged!
|
|
|
DELTA 6 X 48 BELT SANDER TRACKING STUD KNOB
FROM MODEL 31-730 NOTE: 1/2-24 THREAD WITH LOCK KNOB CK THREAD ON SIDE UPRIGHT BEFORE BIDDING MINOR CLEAN HAS GOOD THREAD OTHER MODELS 6 X 48
|
|
|
DELTA 6 X 48 BELT SANDER LOWER DRUM
FROM MODEL LISTED IN TITLE(COMBO MACHINE) MAY FIT MANY DELTA SIMILAR MODELS. SPECS. CAST# 406-03-062 63/64 BORE(985) GOOD SIZE 5 1/2" O.D. VERY NICE- NO DAMAGE. SLOP, CRACKS, DISTORTION- YOU MINOR CLEAN BORE
|
|
|
DELTA 6 X 48 BELT SANDER BELT TENSION ASSEMBLY
FROM MODEL 31-730 MAY FIT OTHER SIMILAR DELTA MODELS WILL SHIP AS SHOWN 10 PIECES TOTAL FOR REF. 7/16-14 STUD + KNOB THREAD CAST# ON SQUARE HOUSING BS-234 ALL GOOD PARTS- THE FLAT ON SHAFT FOR KNOB LOCK DUGGERED UP SOME SEE"RED" IN PHOTO- STILL LOCKS WELL
|
|
|
DELTA 6 X 48 BELT SANDER DRIVE SHAFT
FROM MODEL 31-730 MAY FIT OTHER 6 X 48 MODELS PER SPECS. SHAFT DIA'S KEYWAY. THREADS. VERY GOOD CONDITION BEARING 6204 + 6205 WILL INCLUDE BUT I WOULD REPLACE BOTH
|
|
|
DELTA 6 X 48 BELT SANDER BASE CABINET LOUVERED DOORS
FROM CABINET MODEL# 52-611 2 DOORS 13 W X 20 3/4 LONG NICE CONDITION.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-143bea807c2-0xee-
|
|
|
Delta Bench Oscillating Spindle Sander Model 31-780 2201-22
Delta Bench Oscillating Spindle Sander Model 31-780 2201-22-Model No. 31-780C-Serial No. J0103-Manufactured in Taiwan Specifications: 120 Volt AC-60 Hz-1/4 HP-1725 RPM-3.5 amp Features: Heavy Duty Casting Table top approx. 1 inch thick. Built-in dust collection system. Plus Delta dust bag for collection. Different diameters/ various sizes of sanding drums which interchange quickly. Manual included QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is ... moreremoved it was sold locally. We attempt to remove item/s posted on eBay that have sold out of your brick and mortar shop in a timely manner. If in the event an item/s is purchase on eBay and it has sold out of our store, we will cancel the eBay sale and issue a full refund to the buyer. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the orde
|
|
|
VINTAGE DELTA ROCKWELL 6 X48 BELT SANDER ARBOR BASE CASTING PART BS201
VINTAGE DELTA ROCKWELL 6 X 48 BELT SANDER ARBOR BASE CASTING PART NUMBER BS201. SOLID WITH NO CRACKS OR WELDS. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
VINTAGE STEEL TOP PLATE OFF OLD DELTA 6 X 48 BELT SANDER FLARED LEG STAND
VINTAGE DELTA TOP PLATE OFF A OLD STYLE STEEL 6 X 48 BELT SANDER STAND. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
VINTAGE DELTA 6 X 48" BELT SANDER MAIN LOWER DRIVE SHAFT
UP FOR SALE HERE IS A VINTAGE DELTA 6 X 48" BELT SANDER MAIN LOWER DRIVE SHAFT. THIS CAME OFF AN OLDER UNIT AND IS IN GOOD USABLE SHAPE. IT IS 14 3/8" LONG AND THE OD'S ARE(STARTING AT THE SMALL END) ARE.750. 7865, 1.123 AND 9835. I DID NOT INCLUDE THE DIAMETER OF THE SINGLE BEARING SHOWN IN THE MEASUREMENTS. THE BEARING GREASE IS ALL DRIED OUT AND I DO NOT KNOW IF IT COULD BE SAVAGED. GOOD THREADS AND NUTS ARE INCLUDED. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
VINTAGE DELTA 6 X 48" BELT SANDER MAIN FRAME PLATEN LOCKING COLLAR & BOLTS
VINTAGE DELTA 6 X 48" BELT SANDER MAIN FRAME PLATEN LOCKING COLLAR& BOLTS. SOLID WITH NO CRACKS OR WELDS. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
VINTAGE DELTA 6 X 48" BELT SANDER BOTTOM STAMPED COVER PLATE
VINTAGE DELTA 6 X 48" BELT SANDER BOTTOM COVER PLATE SHIELD. THIS HAS BEEN REPAINTED SOMETIME IN IT'S PAST AND THERE ARE RUNS IN THE PAINT. SOLID WITH NO CRACKS OR WELDS. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
VINTAGE DELTA HOMECRAFT 4" JOINTER 37-110 HEIGHT ADJUSTING HAND KNOB SET
VINTAGE DELTA HOMECRAFT 4" JOINTER MODEL 37-110 HEIGHT ADJUSTING HAND KNOB SET. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
Early Delta Milwaukee Homecraft Belt-driven 8.5" Disc Sander Model # 31-200
For sale is an early Delta Milwaukee Homecraft Model No. 31-200. 8.5 inch belt-driven disc sander. Only the early Homecraft machines had serial number tags and this style of tag was used on Delta machines until the late 1940's. Comes exactly as shown in great working order. You will need to add a motor and I recommend a 1/3 to 1/2 HP motor that runs at 1725 RPM. The sander was spot-painted with silver paint. I cleaned up the rust on the table and the table surface has some light surface pitting. The sander will ship to you partially disassembled so nothing gets broken. Its fairly easy to take apart and reassemble.
|
|
|
Delta 6" Belt 12" Disk Sander Name Plate / 52-613
Delta 6" Belt 12" Disk Sander Name Plate/ 52-613 Machine serial number 85K25900. Acceptable but not perfect condition.
|
|
|
Delta Dual 12" Disc & 6" Belt Sander on Stand w/Rockwell Dust Collector - 1 PH
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: P32751 A: 0013000000CXCfg O: 0065000000PmHNG PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Delta Dual 12" Disc& 6" Belt Sander w/Stand& Rockwell Dust Collector- Single Phase. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Delta Model: ... more31-730 Type: Disc& Belt Sander Serial No: 85N42935 Features/Specifications: Disc Size: 12" diameter Belt Size: 6" wide Disc Table: 7" x 16" Belt Table: 7.5" x 14.5" Delta Motor: 3/4 HP- 115/230V- 9.8/4.9A 3 450 RPM- 60 Hz- 1 PH Includes: Rockwell single phase dust collector Delta stand(M: 52-611F) Dimensions: Dimensions(Sander) L 25" x W 24" x H 58" Dimensions(Dust Collector) L 22" x W 20" x H 27" Shipping Weight: 480 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenan
|
|
|
The DELTA X5™ Model 31-255X 18" x 36" Drum Sander
You are bidding on a seldom used DELTA X 5 ™ Model 31-255X 18" x 36" Drum Sander has a 4" dia. port to handle fine dust plus a sturdy welded stand and cast iron table. It comes WITH the dolly for easy portability around your shop. 120V. 1-1/2HP, 1PH motor and 1/30HP, 90V DC permanent magnet motor. 2.210 and 3,300 SFM drum speeds- 1-12 FM conveyor speed. 46"H x 24-1/2"D x 28-1/2"W. Net weight 190 lbs. 215 lbs. shipping weight. THIS IS LOCAL PICKUP ONLY. Email me for options on receiving this.
|
|
|
Delta Sanding Station 31-300
For sale is a well taken care and gently used Delta 6" Belt/12" Disc Model 31-300 Cast iron tilting tables. Heavy-duty Excellent condition. This is the made in USA 1 1/2hp heavy duty model with mobile base. Currently wired for 110volt Posted with
|
|
|
DELTA Milwaukee 6 x48 *Belt Sander Grinder Finisher* Idler Drum Cover* Rockwell
Here's the Idler Drum Cover for a 6" x 48" Delta Milwaukee Belt Sander Grinder Finisher(will also fit the Rockwell models of this machine) As you can see in the photos, this part needs some TLC! but. In light of what these pieces sometimes go for. I thought it might be a worthwhile project. There's one smaller repair to one end. The very common groove left behind by poor belt tracking. This repair has been partially filled, with a common product called"Plastic-Weld" I've had very good luck with this filler. It's durable. Sticks well, and takes paint well. The repair could be completed with other products as well. Though, as I've found the"Plastic Weld" to be very stable. And inert, once hardened. These partial repairs were made several years ago) The second partial repair. Involves the Guide ... morepin. Inside the cover. There was some cracking around it's base. This repair looks to be very sound. And is nearly completed. Of course. The major concern here, is the large break. This is a clean break; meaning. That only one piece is broken off. And when held together. The pieces mate nicely. This would need to be strongly glued at the edges. Perhaps this repair could also be reinforced. From inside, an adhesive backed sheet. Or tape. Ultimately. I think this item could be restored to usefulness with limited effort. And at a significant cost savings, over a better condition used. Or new PVC, replacement. ~* ~ Let me know if you've got any questions. Will ship in a USPS Medium Flat Rate box. Thanks!
|
|
|
*Delta ROCKWELL* 1" X 42" Belt Sander Grinder ~Body,Base,&Table ~Good Condition~
Here's the Frame(or Body) from a nice Vintage Delta ROCKWELL 1" X 42" Belt Sander Grinder All the parts here are in Good Working Condition! Included are: a Nice Table all the Wheel arbors the Idler arm all the Panels, Fasteners and the Sander Base. No wheels or Pulleys included in this listing. Otherwise Ready to Rock and Roll! The Drive Arbor bearings are in Good Condition! and I hooked a motor up to the arbor. And ran it at speed. And it sounds great! If you've seen what these go for when complete, then you'll know that this is an excellent value. ~* ~ Let me know if you've got any questions. Thanks!
|
|
|
DELTA MILWAUKEE homecraft DISK SANDER w/ MITER GAUGE vtg home craft
please click then supersize the photos for a good look NOTE: this is available with a motor and stand. As a whole working unit, to the high bidder if he wants to come and pick it up(SEE LAST PHOTO) Your bid gets you the whole item or whatever you want off of this machine. HOWEVER for shipping purposes i just calculated the Delta sander and the Miter Gauge that appear in most of the photos. Not the wooden stand or motor. IF you win and want to pay extra to ship this motor separately that's up to you, know that the motor weighs 25 lbs and other than testing it to see if it works, I know nothing about it. I would not recommend shipping the sander and motor in the same box as damage may incur) HomeCraft disk sander by Delta Milwaukee One side is set up for an eight inch disk and the other is set up for a nine inch disk. Has an oil cup on ... morethe shaft. Originally was attached to a 1/3 horse power motor. Comes with the often lost miter gauge to keep your fingers away from the spinning sand paper(OUCH! From a local estate. The wheels spin freely without play. More TOOLS and neat stuff FROM THIS ESTATE are listed this week. Click here to see my other listings. I will combine shipping when possible Any Questions? Please feel free to ask. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14476f55ff8-0xe3-
|
|
|
Delta Rockwell 12" Disc Sander Sanding Disk & Hub Part
For sale is a 12" Sanding Disk& Hub for a Delta 12" Disc Sander. Hub has a 3/4" diameter bore with a standard keyway. Bore is not wallowed out.
|
|
|
DELTA SA350 Shopmaster Boss 1,724 RPM Bench top Spindle Sander - Complete
Up for sale is a DELTA SA350 Shopmaster Boss 1.724 RPM Bench top Oscillating Spindle Sander. 18" cast iron table top. 1-inch. 1-1/2-inch, 2-inch, and 3-inch rubber spindles and drum plates, dust bag, and necessary wrenches for changing spindles. This machine is from my personal shop. It is complete. Well cared for, and in great working condition. It runs quiet and smooth. See pics and let me know if you have any questions.
|
|
|
Delta 18 x 36 Drum Sander 31-250 with Attachments
Up for sale is a Delta model 31-250 open head drum sander. The 18" drum allows total sanding width of 36" Also included is a 4 x 9 Pneumatic drum attachment. And a shaft for a flapper wheel. The extra shafts can be attached to one end of the main drive shaft, and removed when not in use. This machine is from my personal shop and works well for light to medium sized projects. I used it to sand Clipboards. Cutting Boards, and Lazy Susans. It has seen quite a bit of use, and has been well maintained. The only issue is that the main power switch does not work. I rewired it so that it's always on and just plug it into a power strip and use the on/off switch on the power strip. This is a heavy machine. So local pick up only. View pics and let me know if you have any questions.
|
|
|
Delta Rockwell 6"x 48" Belt/12" Disc Sander Combination Pulley Guard
Original Delta Rockwell pulley/belt guard for the 6"x 48" belt/12" disc sander combination machine in very good condition.
|
|
|
Rockwell Delta 12" Disc / 6" Belt Sander ***NO RESERVE***
Rockwell Delta Finishing Machine. Model 31-71C. 3 Phase 220 volt. In good operating condition. Cleaned and re-painted and ready to work. This is a heavy duty piece of machinery made in the USA during the mid 1900's. Belt driven so it can easily be converted to single phase just by changing the motor. Located in Myrtle Beach, SC and pick-up is preferred. Shipping is the responsibility of the seller to arrange and any cost incurred by shipping including its preparation be paid by the purchaser. Only what is shown in the pictures is included in this auction.
|
|
|
delta rockwell sander finisher with 6x48 belts,and manual
hi.You get machine,8 sanding belts,3 abrasive belts,6 cans of belt cleaner,local pickup only,NO FREE SHIPPING,or you pay crating and freight to your destination,it's heavy and expensive to ship,call 321-639-7311 disregard ebay free ship.B
|
|
|
Delta model 31-250 drum sander Feed Motor
Used DC Gear motor for the feed table on a Delta model 31-250 open head drum sander. Motor works and is in good condition
|
|
|
Rockwell Delta 12" Disc / 6" Belt Sander Grind Grinding Disk Sand Sanding
brighton112 This Machine is in plant- part of a liquidation we are doing! to see items from this facility- save on shipping when you buy multiple items from the same location! Email us for more pics/ info! OR. You are bidding on a Rockwell Delta 12" Disc/ 6" Belt Sander! Good condition- in plant UNDER POWER! Email for more information or video! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
Delta Woodworking 18" x 36" Drum Sander Md.# 31-255X
Delta 18" x 36" drum sander model# 31-255X in great shape very gently used. Must sell as owner is unable to use equipment due to health reasons. We have listed it as local pickup only but will ship common carrier at buyers expense. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14526b7b57a-0x105-
|
|
|
DELTA-Disc Sander- 12" 1/2 HP -1725 RPM 120 Volt On 22x22x 31"metal Stand
DELTA. 12" disc sander on 22 x 22 x 31" high metal Stand. Used. Excellent condition. As is. Posted with
|
|
|
Delta Industrial Belt Sander 1/3 HP Repulsion Induction Motor
Nice older belt sander Used in a university machine shop- Turns on and belt stays on and grinds- Sold As is- No Returns We can load- Local Pickup- Cash Check or money order- E-Mail if you have questions If you arrange for pickup and shipping we will assist loading. Our zip code is 14850
|
|
|
Delta Rockwell 6"x48" belt sander 1940s
Delta Rockwell 6" x 48" Belt Sander I think it in the 1930s/1940s roller are free amd are not stuck. It has some rust but it can be restored, I got it years ago from the Norge where i worked, they sold alot of the old war thing, I use it years ago, but it has ben siting in the barn for 30years:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1453ac4901d-0x111-
|
|
|
Delta Rockwell Belt & Disc Dander Combo- 4" Wide Belt Sander & 12" Disc, 3 Phase
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Delta Rockwell Belt& Disc Dander Combo- 4" Wide Belt Sander& 12" Disc. 3 Phase Item Description: This is a Delta Rockwell Belt& Disc Dander Combo- 4" Wide Belt Sander& 12" ... moreDisc. 3 Phase- Included are T-Square 60 degree attachment. The Disc Sander has 90 degree tilt. Unit is currently hardwired and you can see it running at the inspection.The power will be cut off after the inspection date and the units will not be unbolted from floor( it is the buyer's responsibility to unbolt or rip saw them)and hardwire removed.There is no forklift at the location so you will be responsible for bringing your own equipment to load this unit. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 38970) nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Features: clean working condition, nbsp, nbsp, Date of Manufacture: unknown, nbsp, nbsp, Size: 31 25 38, nbsp, nbsp, Color: gray, nbsp, nbsp, Condition: This item is used and sold as-is. The item did power-on. But NO other functions were tested. May need service and/or parts to make fully operational. nbsp, nbsp, Pickup Logistics and Handling: No load
|
|
 |