|
|
Order by: Available to: eBay Affiliate Links
|
$21.90 Shipping Condition: Used Location: Holliston, United States Mixed lot of new and used shaper cutters carbide tipped. Rockwell shaper to 1/4” router bit adapter.
Buy It Now
$400.00 Shipping Condition: Used Location: Mancos, United States Giant lot of woodworking shapers cutters collars and more.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, TILT TABLE CASTING. NO CRACKS OR REPAIRS.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States
Buy It Now
$14.13 Shipping Condition: Used Location: Millstadt, United States Condition - Good used condition. The repair was done very well. Can only be seen inside the jaw. Ensure the item will fit your needs. Approximate Weight ... more- 15 lbs. Forklift loading isFREE. Height - 7".
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ANSWER ANY QUESTIONS FREE ... moreSHIPPING TO THE LOWER 48 USPS FLAT RATE SHIPPING
Buy It Now
$4.19 Shipping Condition: New Location: Concord, United States IT IS PRINTED ON THE SPECIAL ALUMINIM SHEET. SEE THE PICTURES TO VERIFY WHICH ORIGINAL PLATE IT'S REPLACING. THERE ARE DIFFERENT THREADING CHARTS ON A ... moreROCKWELL 11 LATHE WERE USED.
Buy It Now
$19.95 Shipping Condition: For parts or not working Location: Upland, United States 1/2" SHAPER SPINDLE FOR ROCKWELL/ DELTA HEAVY DUTY Picture of sample item You are bidding on a 1/2" Shaper Spindle for a late model Rockwell/ ... moreDelta Heavy Duty Shaper. Matches up to a Delta PN 43-347. New but no box or packing. Nuts and Lock Washers are available on E-bay and or Delta dealers. If item to be returned. Refund will be given for original item and original packaging. Buyer pays for return shipping.
Buy It Now
Condition: Used Location: Dalton, United States Swing: 14". Fully Functional! Complete w/ NEW Toshiba Motor! It is imperative that you provide all pieces of information! Local pickup is available as ... morewell. Can you believe our price?.
Buy It Now
$91.79 Shipping Condition: Used Location: North Ridgeville, United States shaper from woodworkers estate send offer
Buy It Now
$39.99 Shipping Condition: Used Location: Waterford, United States USED, DELTA ROCKWELL OUTBOARD LATHE TURNING STAND STAND BASE. THE TOP FITTING THAT HOLDS THE TOOL REST IS MISSING. LOOK AT THE PICTURES.
Buy It Now
$88.44 Shipping Condition: Used Location: Dammeron Valley, United States This was used by my husband. It is 20 plus years old. It appears to be electric and has looks like it has an alternate power source.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States It will clean up good. I use goo gone but I am out. Thank you for considering to support our family and small business. Words cannot express how grateful ... morewe are for your business no matter how big or small your contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
Free Shipping Condition: Used Location: San Ramon, United States Vintage 6” RISER KIT DELTA ROCKWELL 14" BANDSAW W/ 15/16" DIAMETER ROUND POST in nice shape as shown. All original parts. Ready to use. Wood blade guard. ... moreFree shipping to all 50 States!!! Thanks, Steve
Buy It Now
Condition: Used Location: Valencia, United States Reconditioned Delta/ Rockwell 10" Tablesaw(RM# 806) 3HP; 1PH; 230 Volt Reconditioned. Repainted, Re-wired New Bearings in Arbor Set of 3 New Belts ... more5" Uni-Fence or 52" Biesmeyer your choice! PLEASE CALL KEVIN 239-947-0348 OR 239-250-1528
Buy It Now
Condition: Used Location: Thomaston, United States SPEEDS AVAILABLE 425, 600, 1100, 2050, 3900, 5500. 42" MAXIMUM DRILL HEIGHT, 15" DRILL CIRCLE. 208-220/440 VOLT 3 PHASE MOTOR. THIS IS A GOOD WORKING ... moreHEAVY DUTY DRILL PRESS. 6" PLUS QUILL TRAVEL. BASE HAS PROVISIONS FOR T-SLOTS AND HOLES TO BOLT TO FLOOR.
Buy It Now
$99.99 Shipping Condition: Used Location: Lombard, United States Used condition with dings dents and scratches to the base. Some surface rust spots. Missing ID tag. Please see photos for details. Thanks for looking ... moreShipping price to the lower 48 only
Buy It Now
Free Shipping Condition: New Location: Holly, United States A08514 or 904166 Delta & Rockwell variable speed motor pulley (both halves).
Buy It Now
$150.00 Shipping Condition: Used Location: Corvallis, United States And it is 13 in. high -- 115 VAC 9 amp 60 cycle - 3/4 hp -- includes a heavy duty miter gauge and original rip fence [no rails found with this unit] --.
Buy It Now
$5.15 Shipping Condition: Used Location: Albuquerque, United States Delta Rockwell lathe 3" adapter 3/4"-10 tpi RH threads HL615 in good condition. This will adapt Delta 8 1/2" sanding plate (DDL-33) to older Delta 10" ... morewood lathe or any lathe with 3/4"-10 tpi spindle.
Buy It Now
$53.25 Shipping Condition: Used Location: Melrose, United States Delta Crecsent Rockwell 20" Bandsaw wheel - with rubber tire installed. Lower wheel (upper is also available).
Buy It Now
$20.93 Shipping Condition: Used Location: Waterford, United States DESCRIPTION: USED. DELTA ROCKWELL TOOL REST BASE FOR THE 12" LATHES. IT USES 1" DIAMETER TOOL RESTS. CLICK ON THE" SHIPPING AND PAYMENTS" ... moreTAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States It will clean up good. I use goo gone but I am out. Thank you for considering to support our family and small business. Words cannot express how grateful ... morewe are for your business no matter how big or small your contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 240V 1-Phase 3HP. No separate break circuit is required.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States 1x LTA-516.
Buy It Now
$15.00 Shipping Condition: Used Location: Riverside, United States
Buy It Now
$58.56 Shipping Condition: Seller refurbished Location: New Port Richey, United States
Buy It Now
$8.81 Shipping Condition: Used Location: Mount Dora, United States Delta Rockwell 6" x 48" belt & disk sander dust port chute and guard that fits over the drive drum (# BS-209). Good used condition with some dings and ... morescratches. See pictures for what is included and more on condition as pictures are part of the description. You will be receiving the pictured item. Feel free to ask any questions you may have. Ships with USPS Mail using calculated shipping.
Buy It Now
$6.99 Shipping Condition: New Location: Nampa, United States IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
Buy It Now
$6.99 Shipping Condition: New Location: Nampa, United States IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
Buy It Now
$16.00 Shipping Condition: Used Location: Fairfax, United States The manual covers all aspects of the lathe, including its features, functions, and capabilities.
Buy It Now
$6.99 Shipping Condition: New Location: Nampa, United States IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
Buy It Now
$189.95 Shipping Condition: Used Location: Wolcottville, United States Tested and works as it should. About 17" of travel .
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$28.27 Shipping Condition: Used Location: Waterford, United States USED, CAST BELT GUARD FOR THE SLO SPEED (BIG PULLEY) DELTA 14" DRILL PRESS WITH THE DP220 HEAD CASTING. THE MOUNT BRACKET HAS A CHIP OUT OF IT. IT STILL ... moreHOLDS ONTO THE FRONT PULLEY COVER. THERE ARE NO CRACKS OR REPAIRS ON THE BELT COVER SECTION.
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States DESCRIPTION: USED. DELTA ROCKWELL SAFETY COLLAR. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. ... moreI WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE TOOL
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States New Delta Rockwell 17" Drill Press Spindle Load Spring Washer SP-7352.
Buy It Now
Free Shipping Condition: New Location: Naperville, United States Each manual has been digitally reproduced and "cleaned up" by a professional computer artist to achieve the best results possible with the existing data ... moreavailable. This particular manual contains 44 pages total.
Buy It Now
$6.99 Shipping Condition: New Location: Nampa, United States IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
Buy It Now
$6.99 Shipping Condition: New Location: Nampa, United States IF YOU NEED MORE PHOTOS. WHEN YOU BUY MORE THAN 1 ITEM.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Nut is machined with an extra wide shoulder to compensate for loose or worn threads.
Buy It Now
Free Shipping Condition: New Location: Walton, United States For Kreg KMS7215 Fine-Tuning Micro Adjuster Precision Band Saw Router Fence Fitment: The KMS7215 Micro Adjuster is compatible with Kreg precision band ... moresaws and router table fences. KMS7215 Micro Adjuster is suitable for home improvement premium tools and can be precisely adjusted to the band saw fence-accurate to 0.005"(0.127mm) Features: Easy to Adjust: Use this Micro-Adjuster you can easy to adjust with the simple turn of a thumb wheel. Also provided more controlled adjustments makes small fence adjustments much easier. Precise Adjustments:.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States It will clean up good. I use goo gone but I am out. Thank you for considering to support our family and small business. Words cannot express how grateful ... morewe are for your business no matter how big or small your contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States DESCRIPTION: USED. DELTA ROCKWELL SAFETY COLLAR. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. ... moreI WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE TOOL
Buy It Now
$15.35 Shipping Condition: Used Location: North Bend, United States Delta /Rockwell light duty shaper complete spindle cartridge.Good bearings.1/2” spindle with nut and 3/4” plastic reducers.See images for gnarling on ... moretop of the spindle. The threads are fine.See images for cosmetic flaws, stains, rust etc.
Buy It Now
$5.50 Shipping Condition: Used Location: Dennis, United States Vintage Delta Rockwell 43-190 Stub Shaper Spindle for Delta Heavy Duty Shapers
Buy It Now
Free Shipping Condition: Used Location: Waterford, United States USED, DELTA SPIDER HANDLE. 2 OF THE 3 HANDLES ARE MISSING. THE HANDLE BORES ARE 3/8-24. THE MOUNT BORE IS 1-1/4". NO CRACKS OR REPAIRS.
Buy It Now
$58.56 Shipping Condition: Seller refurbished Location: New Port Richey, United States
Buy It Now
$22.95 Shipping Condition: Used Location: Kearneysville, United States HUGE LOT Delta Rockwell Shaper Cutters, Spindles & Collars 41 SHAPERS MORE! Come as pictured. Please view pics for best description and condition. Box ... morenumbers may not match content. Zoom in on pictured. Many unique cutters, shapers etc.
Buy It Now
$15.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOU !!!!I do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$129.99 Shipping Condition: Used Location: Ashby, United States Nice Delta Rockwell CAST IRON and steel PEDESTAL STAND FOR buffer . Shipping lower 48 states
Buy It Now
Free Shipping Condition: New – Open box Location: Goddard, United States Delta 12" Gap Bed Wood Lathe 46-204, 1460, 46-305, 46-450, 46-500, 46-510. It contains 30 pages. About this manual : This is a high quality reproduction ... moremanual which has been scanned with a high resolution scanner.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. ... moreI believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find.
Buy It Now
Free Shipping Condition: New Location: New Port Richey, United States Right tilt saws have left hand threaded arbors while left tilt saws have right. -New Arbor. -New Arbor Nut.
Buy It Now
$7.55 Shipping Condition: New Location: Berlin, United States AS SHOWN
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Untitled Document Free. Fast Shipping Every Business Day! Delta/Rockwell/Milwaukee 6" Belt Sanders Instructions and Parts Manual Manual Description: ... moreNumber of Pages: 19 This is a reproduction. Not a photocopy, of an original Delta-Milwaukee-Rockwell 6" Belt Sanders Instructions and Parts Manual. This manual contains information installation, operating instructions, belt adjustments, belt recommendations, and explosive view parts diagams of all the parts with descriptions. Delta made this sander for decades. They also made this sander with a 12" disc on the side. And we have the manual for that machine too. We combined two different manuals together to cover the different vintages of this sander. The older Delta/Milwaukee didn't usually have the model/catalog number on them, but the newer Rockwell covers the 1400, 35-501, 31-505, 31-506, 31-520, 31-576, 31-630, 31-014, and 31-403. If your sander looks similar to the ones below, this manual will be useful. I also highly recommend the"DELTA Getting Most Out of Your Abrasive Tools Book Manual 0211" Which we carry. It covers a lot of different set ups and unique uses for these sanders. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the pho
Buy It Now
Free Shipping Condition: Used Location: New Port Richey, United States
Buy It Now
$6.80 Shipping Condition: New Location: Delaware, United States I have never gotten a DRO for my lathes and it’s been a pain trying to mount an indicator to the bed. Dial indicator is obviously not included . Precise ... moreindicator hole which ensures indicator is firmly held.
Buy It Now
Free Shipping Condition: Used Location: Spring Grove, United States
|
|
|
|
ROCKWELL DELTA COMBINATION 6X48 BELT AND 12" DISC SANDER WITH TILTING TABLES
BUY IT NOW NO WAITING. ROCKWELL DELTA COMBINATION 6X48 BELT SANDER AND 12" DISC SANDER. WORKS GOOD. HAS TWO TILTING TABLES NO MARKS OR RUST. 1.5 HP 230-460 VOLTS 3PH. MISSING TOP COVER FOR BELT SANDER DOESN'T AFFECT ITS ABILITY TO OPERATE. YOU GET WHAT IS PICTURED AND NOTHING ELSE. PAYPAL TAKEN. QUESTIONS CALL JUSTIN 619-253-6499. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $ 50.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING ... moreYOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS, WITH OUT LIMITATION, ANY
|
|
|
Delta Rockwell 12 Disc and 4x52 belt sander combo restored
12 inch disc and 4x52 inch belt. All pieces professionally powder coated and reassembled with new bearings. New graphite on platen. Includes 5 new 80grit belts. NO motor or stand. Tracking has to be adjusted. I hate to see this go. But really need the space more than the machine. My loss is your gain. For pick up in Milwaukee WI. Will store with payment for up to one month.
|
|
|
delta rockwell 6 X 48 BELT SANDER GUARD/SHIELD COVER
A Delta Rockwell 6 by 48 belt guard in good working condition. No rust I can see. Some marks on it from wear and tear. Measures 15" by 6 5/8" by 3/4"
|
|
|
Delta Rockwell 1x42 sander grinder platens manual
3 platens and one original manual. Two identical inch platen and a curved platen. No significant wear on the used ones. Sold as one lot. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13fa08b1839-0xff-
|
|
|
ROCKWELL DELTA 1" x 42" BELT SANDER GRINDER MODEL 31-355
Picked this up locally. Runs very smooth, it is in plug and play condition. I don't believe the belt guard/cover is an original, just a well made, home made one in very nice condition. The 2 small idlers are made from aluminum with roller bearings in them and are self centering. There are light scratches all over the machine from previous use. This machine will be shipped in a wooden box!
|
|
|
DELTA ROCKWELL DUAL BELT GRINDING POLISHING DEBURRING SANDER 2-1/2" X 48" - RARE
Vintage Delta Dual Belt Grinding. Polishing, Deburring and Sanding Machine SN# 72-9439. I believe the sander was manufacture in the mid 1950's. The sander is currently running 2-1/2" x 48" belts and can probably run belts to about 60" in length or maybe just a little longer. Stout heavily built Master 220/ 440 volt motor 1 Hp three phase motor. The tracking of the sanding belts is easily adjusted by a simple belt tracking mechanism, the upper knob on each idler arm can be turned clockwise or counter clockwise to control the belt tracking. The sander is in good condition, and runs very well bearings in the motor and lower and upper sanding shafts are tight. There are no broken or cracked pieces, what might appear to be damage on the right side of the upper right main idler arm casting is just paint, not a casting imperfection, ... moreflaw or damage. Includes original paperwork/ sales brochure. The machine is missing one small black plastic ball end knob for the belt tensioning lever. And one metal post cap for one of the vertical support columns. Please confirm total weight and pallet size before paying.
|
|
|
Rockwell Delta 12" Disc Sander on Stand Runs Solid and Quiet
Up for grabs is a 12" Delta Rockwell disc sander. With a 1 hp motor which runs really strong and quiet and is 115/230 volt. The sander can be set up to collect dust although it does not have the down pipe. It has been painted and looks pretty good, but it was not done professionally. I prefer local pick up because I am not a machinery company, but I will ship freight with prior authorization from me prior to purchase. I will pallet, but there will be a $50 fee as to cover costs and the buyer must purchase the freight as well as coordinate the shipping from 93033. My guess is this unit weighs approximately 150-170 lbs and the dimensions are 43"h x 17" w x 25" d. Do not hesitate to ask any questions prior to bidding and if you would like to come test the unit please message me on Ebay so we can coordinate. Thanks for looking ... moreand good luck!
|
|
|
Delta Rockwell Belt Sander Trunnion Abrasive Finishing 6 x 48 drill saw jointer
Delta Rockwell Trunnion from 6 x 48 abrasive finishing machine machine serial 9-5409 part number cast into trunnion BS 207 includes U-shaped segment. Pointer, and set screws- ready for new set screws no cracks no repairs no welds no damage no undue wear machined areas are flat and undamaged trunnion is used to mount table to sander body all mounting ears in good shape- will include three mounting screws has been repainted by a previous owner can bolt on and use or clean and repaint to taste a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions ... moremust contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own
|
|
|
Delta Rockwell Belt Sander Idler Drum Bracket 6 x 48 drill saw jointer
Delta Rockwell Idler Drum Assembly from 6 x 48 abrasive finishing machine machine serial 9-5409 part number cast into trunnion BS 204 idler drum bracket. Two piece idler drum, idler drum shaft, and associated hardware bearings are present. Probably original, and should be replaced no cracks no repairs no welds no damage no undue wear machined areas are flat and undamaged has been repainted by a previous owner can bolt on and use or clean and repaint to taste only parts shown are included- look carefully at the pictures and ask questions internal parts also available- check other items for sale a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship ... moreonly to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Picture
|
|
|
Delta Rockwell Belt Sander Drive Drum 6 x 48 drill saw jointer
Delta Rockwell Drive Drum- lower from 6 x 48 abrasive finishing machine machine serial 9-5409 part numbers BS 219 S matched pair from same machine no cracks no repairs no welds no damage no undue wear bore OK- drums remain reasonably round with eyeball check has been repainted by a previous owner can bolt on and use or clean and repaint to taste only parts shown are included- look carefully at the pictures and ask questions a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal ... morerules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and research. Ask questions! I will offer whatever hone
|
|
|
Delta Rockwell Belt Sander Platen 6 x 48 drill saw jointer
Delta Rockwell Belt Sander Platen cast iron construction from 6 x 48 abrasive finishing machine machine serial 9-5409 part number BS 205 no cracks no repairs no welds no damage flat platen surface has some wear associated with typical use shallow divots and wear at table intersection remains fully functional has been repainted by a previous owner can bolt on and use or clean and repaint to taste only parts shown are included- look carefully at the pictures and ask questions a nice rare piece to finish off the restoration of your belt sander see O W W M for more detail- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before ... morebidding please read and understand eBay and PayPal rules before bidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and res
|
|
|
Delta Rockwell Stand Flared Foot 50-406 band table saw drill sander bugle bolt
Delta Steel Stand flared foot bolt together construction 29" legs- top is 16" x 8" 15 proper bugle bolts nuts and star washers catalog# 50-406 or# 329 proper stand for Delta 6 x 48 abrasive belt sander finishing machine may fit others no cracks chips repairs or damage mounting holes in legs feet and tables added by previous owners buyer may wish to clean and/ or repaint to taste good sturdy stand with no"issues" shipping is for lower USA CONUS only other locations please ask- payment required within five days of auction close items not paid for within this time frame are re-listed w/ nonpaying report filed with eBay I will ship only to your PayPal confirmed address bidders with less than less than ten positive eBay transactions must contact me before bidding please read and understand eBay and PayPal rules before ... morebidding I follow these rules and expect bidders will do same- I have been buying. Selling, trading, collecting, and, most importantly, using vintage USA made wood and metal working tools for more than twenty years. Please bid with confidence knowing that any tool I offer for sale has been selected with care and consideration informed by that experience. I do not hide flaws and use detailed descriptions and clear pictures to give you the bidder as much information as I can, to help you make an informed purchase. I would rather leave a tool on the shelf than have an unsatisfied buyer. I do not know everything. Nor do I present myself as an expert; just as an informed, honest seller. As a bidder, your responsibility is to consider carefully all the information I have offered. The pictures are the primary descriptor and supersede all other descriptions. Pictures are of the actual item offered for sale unless stated otherwise. Augment this information with your own knowledge and research. Ask questions! I will offer whatever honest answers I can. Purchase price refunds/
|
|
|
8 1/2 " diameter sanding disc backup Plate Craftsman Rockwell Delta
8 1/2" diameter sanding disc backup plate. Has a 1/2" diameter removable shaft. Not sure of the make or what it's actually made for. The only markings are"Made in United States of America"
|
|
|
DELTA ROCKWELL 6 X 48 BELT SANDER TABLE FROM MODEL 52-611
FROM MODEL 52-611 BUT I BELIEVE IT WILL FIT MANY OTHER DELTAS. PROTRACTOR + TABLE SHIPPED AS SHOWN. INCLUDES 7/16 STUD FOR LOCK-MOUNT TO FRAME. TOP TABLE SURFACE HAS THREE"RED" LINES + ONE OTHER SMALL AREA. THESE ARE MARKS(NOT CRACKS) SHALLOW"SCALLOP" AND 3 LONGITUDAL BLEMS. I WOULD GAUGE.015/020 WOULD GIVE 100% CLEAN UP. NO CRACKS. DAMAGE, LITE RUST ON BOTH PARTS AND SOME BLACK STAINING ON TABLE SURFACE. NOTE DIM'S FOR PROTRACTOR. 3 BOLT MOUNT. FOR REF. DIMENSIONS LISTED B/W CENTERS. DELTA CAST# ON BOTTOM 406-03-091-2001 NOT IMPORT MODEL PITTS, PA EMAIL WITH ANY?S.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14387c9fbf5-0x102-
|
|
|
Vintage Table for a *DELTA Rockwell* 6 X 48 *Belt Sander Grinder* Real Nice User
This is a Table for the Classic DELTA Rockwell 6 X 48 Belt Sander Grinder. This table is in nice working condition, and would be a great'User' Or replacement! The three round holes drilled in it are tapped. I could see those. And the slot cut in it. As being very useful for jigs. Or guides. There's a'wear edge' Added to the back side, which is now itself somewhat worn. But it's easily replaceable. On the bottom. You can see where several steel blocks have been brazed. These are strongly. But not very neatly. Attached. At first glance. This looks like the repair; of a break. It's not. Though. The replaceable wear edge is fastened to those blocks; and that's why they were added. Actually. Not such a bad way to deal with the fact that this area of these tables always wears out. You can see. Though, that the table ... moreis overall flat and straight. With no significant marring to the working face. Let me know if you've got questions! Thanks! Local Pick-Up is available, and encouraged!
|
|
|
Delta Dual 12" Disc & 6" Belt Sander on Stand w/Rockwell Dust Collector - 1 PH
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: P32751 A: 0013000000CXCfg O: 0065000000PmHNG PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Delta Dual 12" Disc& 6" Belt Sander w/Stand& Rockwell Dust Collector- Single Phase. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Delta Model: ... more31-730 Type: Disc& Belt Sander Serial No: 85N42935 Features/Specifications: Disc Size: 12" diameter Belt Size: 6" wide Disc Table: 7" x 16" Belt Table: 7.5" x 14.5" Delta Motor: 3/4 HP- 115/230V- 9.8/4.9A 3 450 RPM- 60 Hz- 1 PH Includes: Rockwell single phase dust collector Delta stand(M: 52-611F) Dimensions: Dimensions(Sander) L 25" x W 24" x H 58" Dimensions(Dust Collector) L 22" x W 20" x H 27" Shipping Weight: 480 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenan
|
|
|
DELTA Milwaukee 6 x48 *Belt Sander Grinder Finisher* Idler Drum Cover* Rockwell
Here's the Idler Drum Cover for a 6" x 48" Delta Milwaukee Belt Sander Grinder Finisher(will also fit the Rockwell models of this machine) As you can see in the photos, this part needs some TLC! but. In light of what these pieces sometimes go for. I thought it might be a worthwhile project. There's one smaller repair to one end. The very common groove left behind by poor belt tracking. This repair has been partially filled, with a common product called"Plastic-Weld" I've had very good luck with this filler. It's durable. Sticks well, and takes paint well. The repair could be completed with other products as well. Though, as I've found the"Plastic Weld" to be very stable. And inert, once hardened. These partial repairs were made several years ago) The second partial repair. Involves the Guide ... morepin. Inside the cover. There was some cracking around it's base. This repair looks to be very sound. And is nearly completed. Of course. The major concern here, is the large break. This is a clean break; meaning. That only one piece is broken off. And when held together. The pieces mate nicely. This would need to be strongly glued at the edges. Perhaps this repair could also be reinforced. From inside, an adhesive backed sheet. Or tape. Ultimately. I think this item could be restored to usefulness with limited effort. And at a significant cost savings, over a better condition used. Or new PVC, replacement. ~* ~ Let me know if you've got any questions. Will ship in a USPS Medium Flat Rate box. Thanks!
|
|
|
*Delta ROCKWELL* 1" X 42" Belt Sander Grinder ~Body,Base,&Table ~Good Condition~
Here's the Frame(or Body) from a nice Vintage Delta ROCKWELL 1" X 42" Belt Sander Grinder All the parts here are in Good Working Condition! Included are: a Nice Table all the Wheel arbors the Idler arm all the Panels, Fasteners and the Sander Base. No wheels or Pulleys included in this listing. Otherwise Ready to Rock and Roll! The Drive Arbor bearings are in Good Condition! and I hooked a motor up to the arbor. And ran it at speed. And it sounds great! If you've seen what these go for when complete, then you'll know that this is an excellent value. ~* ~ Let me know if you've got any questions. Thanks!
|
|
|
Delta Rockwell 12" Disc Sander Sanding Disk & Hub Part
For sale is a 12" Sanding Disk& Hub for a Delta 12" Disc Sander. Hub has a 3/4" diameter bore with a standard keyway. Bore is not wallowed out.
|
|
|
Delta Rockwell 6"x 48" Belt/12" Disc Sander Combination Pulley Guard
Original Delta Rockwell pulley/belt guard for the 6"x 48" belt/12" disc sander combination machine in very good condition.
|
|
|
Rockwell Delta 12" Disc / 6" Belt Sander ***NO RESERVE***
Rockwell Delta Finishing Machine. Model 31-71C. 3 Phase 220 volt. In good operating condition. Cleaned and re-painted and ready to work. This is a heavy duty piece of machinery made in the USA during the mid 1900's. Belt driven so it can easily be converted to single phase just by changing the motor. Located in Myrtle Beach, SC and pick-up is preferred. Shipping is the responsibility of the seller to arrange and any cost incurred by shipping including its preparation be paid by the purchaser. Only what is shown in the pictures is included in this auction.
|
|
|
delta rockwell sander finisher with 6x48 belts,and manual
hi.You get machine,8 sanding belts,3 abrasive belts,6 cans of belt cleaner,local pickup only,NO FREE SHIPPING,or you pay crating and freight to your destination,it's heavy and expensive to ship,call 321-639-7311 disregard ebay free ship.B
|
|
|
Rockwell Delta 12" Disc / 6" Belt Sander Grind Grinding Disk Sand Sanding
brighton112 This Machine is in plant- part of a liquidation we are doing! to see items from this facility- save on shipping when you buy multiple items from the same location! Email us for more pics/ info! OR. You are bidding on a Rockwell Delta 12" Disc/ 6" Belt Sander! Good condition- in plant UNDER POWER! Email for more information or video! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
Delta Rockwell 6"x48" belt sander 1940s
Delta Rockwell 6" x 48" Belt Sander I think it in the 1930s/1940s roller are free amd are not stuck. It has some rust but it can be restored, I got it years ago from the Norge where i worked, they sold alot of the old war thing, I use it years ago, but it has ben siting in the barn for 30years:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1453ac4901d-0x111-
|
|
|
Delta / Rockwell 31-730F Belt and Disc Sander + NO RESERVE!
Manufacturer: Delta/ Rockwell Model: 31-730F Belt and Disc Sander Serial: 87E20607 Condition: This machine is in good working condition. Was being used in a local school until they declared it as surplus. Note: The disc table is not included. You can buy these separately. Shipping: Shipping is available and we are fully capable of palletizing this item correctly. Please email us with your shipping address and also let us know if you need a liftgate for delivery and if this is going to a residence or a business. This is a great belt/ disc sander offered by Rockwell Delta. Perform jobs quicker with this two in one machine! 12" Disc Sander 6" Belt Sander Belt Table Size: 14-5/8" x 7-3/8" Disc Size: 12" Belt Size: 6" x 48" belt not included) Electrical: best guess on voltage) 208-230 V 3 PH*Item specs. were ... moreobtained from the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items are being sold sold As-Is. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Delta Rockwell 6x48 Belt Sander Pulleys (2) .75 bore
For sale two delta rockwell 6x48 belt sander pulleys. Larger pulley 5" 3/4 bore Smaller pulley 4" 3/4 bore Both of these pulleys are in very good condition. They spin true and have no damage Thanks for looking!
|
|
|
Vintage Delta Rockwell 6x48 Belt Sander Table Adjustment Mount
Up for sale is a vintage Delta Rockwell 6x48 belt sander table adjustment mount. It has been repaired by welding it back together from a break. The weld looks very clean. The repair was done correctly. Also the C shaped pivoting part is cracked, it looks like it should still work. Thanks for looking!
|
|
|
Delta Rockwell 6x48 Belt Sander backing enclosure plate vintage
Up for sale is a Delta Rockwell 6x48 belt sander backing enclosure plate. It is in good condition with no major issues. There is a small belt tracking grind mark. The paint is faded, and there is very minor rust on the surface. Thanks for looking!
|
|
|
Delta Rockwell Adjustment Handle Fine Pitch 1/2-24 Belt sander
Up for sale is an adjustment handle off a delta rockwell piece of equipment. It is fine thread 1/2-24. I'm not sure where it's from?
|
|
|
delta rockwell sander finisher belts only,.. 6x48 belts, sanding and abrasive
hi.Sold the sander, and now selling the belts, abrasive belts,metal sanding belts, cans of abrasive belt cleaner, these are new bought from granger supply,I'm selling just 3 belts in this auction,your choice.as I have many to choose from,call 321-639-7311,will ship to lower 48 states only,ask questions as all sales are final.REMEMBER YOUR BIDDING FOR CHOICE OF 3 BELTS ONLY,THANKS,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1459c8efca1-0x105-
|
|
|
Delta Rockwell Belt/Disc Abrasive Finishing Machine Table Support/Disc Sander
Original 12" disc sander complete cast iron table support/lower dust collection shroud from a 1970's belt/disc abrasive finishing machine. It is in very good condition and includes the threaded studs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-145bb1976f9-0x10a-
|
|
|
Delta Rockwell Original Heavy Duty 12"Disc For Disc Sander
Original 12" heavy duty disc for Delta Rockwell disc sander in very good condition. The disc surface is excellent with the original machining marks. There is only minor dried adhesive on the surface. This was on a 1970's American made Delta Rockwell belt/disc combination machine. And the disc sander was rarely used. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145c0c8b22a-0x11a-
|
|
|
Delta Rockwell Grinding Polishing and Deburring Machine Model # 41-
Delta Rockwell grinding polishing deburring machine. The sander machine is in good working condition. I am unsure of how the sander was originally configured when shipped from Delta. And if this is how it originally appeared or not. Please use your own judgement and look at the photos carefully. From what info I have the sander was sold under the model number's# 31-411 through# 31-414 each being configured in a different way. Though none of the configurations I can find appear exactly the same as the one I have. The last group of photos are pictures of the small wings/ supports that sat under each arbor that had guards mounted to them. The guards are in very poor shape and most likely not usable. Commercial loading dock with forklift onsite
|
|
|
Rockwell Delta Finishing Machine Platen And Backstop, 31-700
Platen and back stop for rockwell delta finishing machine. Very good condition. See other listings for more. Buyer pays actual shipping. Flat rate usps box. Posted with
|
|
|
Rockwell Delta Finishing Machine End Bracket With Hardware 31-700, Knobs
End bracket and all hardware shown for 31-700 rockwell delta finishing machine. I've just relisted this item because I found a small crack in the casting. 2 close-up photos attached) It is in a spot where everything else around is very strong. And has had no effect on the operation of the machine as far as I could tell. Also it is not visible when assembled. But obviously, this detail needed to be added to this description. Also, I have added the pulley shaft and associated parts to this item. Happy to answer any questions you may have. Buyer pays actual shipping, flat rate USPS, 17.50 large flat rate box. Thanks. Posted with eBay Mobile
|
|
|
Delta Rockwell 6x48 Belt Sander Belt Guard Vintage Complete
Up for sale is a vintage delta rockwell 6x48 belt sander belt guard complete with knob. The guard is in good shape with no dents. It does have some rust on the bottom. I wire wheeled this area and it started to clean up, the rust is only on the surface. Thanks for looking
|
|
|
Vintage Delta/Rockwell 31-700 Belt and Disc Finishing Machine on a Stand
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Vintage Delta/Rockwell 31-700 Belt and Disc Finishing Machine on a Stand Item Description: This vintage Delta/Rockwell belt and disc finishing machine is on a metal stand. Appears to be 110 volt single phase. ... moreNOTES: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Spring Valley. CA 91977 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 40721) nbsp, nbsp, Model: 31-700, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Condition: This item is used and sold as-is. This item was not tested for operation. It was removed from an operating environment and placed in storage. We can not verify operational status. May need service and/or parts to make fully operational. nbsp, nbsp, Pickup Logistics and Handling: Forklift may be available on site to assist in loading on pickup day. However. NO loading dock
|
|
|
Delta Rockwell belt/disc sander tilting table
Used table from a Delta rockwell belt/disc sander. Cast iron. See pics for model numbers of the parts. No warranties or guarantees expressed or implied. See my other auctions for some great deals.
|
|
|
Rockwell Delta 1 HP 1725 motor 3 phase 230/460v 6 x 48 belt sander 31-520 Baldor
Rockwell Delta 1 HP 1725 motor 3 phase 230/460v 6 x 48 belt sander 31-520 Baldor, Click to View Image Album Click to View Image Album Click to View Image Album This auction is for an original Delta Rockwell 230/460v 3-phase electric motor from a 6" x 48" belt sander model 31-520. The motor was manufactured by Baldor and came off a working sander. Tested good at 480v. This motor fits the Delta/Rockwell sanders and comes with a 5" dia pulley# 5500 and shaft key. Below are the specs from the name plate. Motor weighs about 31 lbs: Specifications: 66-039 F1073 M7115 35P29-87 181394811788 Type: 516M Frame: 56YZ RPM: 1725 1 HP Here's your chance to get an excellent used vintage Rockwell replacement motor for your sander. It could also be used for other applications. Check my other auctions for additional Delta Rockwell sander ... moreparts. PLEASE SCROLL ALL THE WAY DOWN TO SEE MORE IMAGES* Buyer pays actual UPS Ground shipping cost from zip code 49504. Simply enter your zip in the calculate shipping field to determine the cost. Please email us with any questions you may have. We will be happy to answer. We can also provide additional photos of any area of this item you wish to see. Thanks for looking! PAYMENT TERMS* PLEASE READ BEFORE BIDDING* We accept PayPal Payment is expected within 3 days of auction end. Payment I accept the following forms of payment: PayPal Shipping& Handling We package all items well for a safe trip. We use appropriate padding and adequate boxes to insure all items are well-protected. Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%
|
|
|
Rockwell High Speed 1" Vertical Belt Sander Grinder w/ Tilt Table Delta
ROCKWELL TABLE TOP MOTORIZED BELT SANDER GRINDER. MADE IN THE UNITED STATES. STEEL FRAME& TABLE. This Is A Real Tool! It's Not A Plastic Toy! Sometimes These Are Called- Band File. Band Sander, Strip Sander, Profile Sander, Mead Sharpener, Table Sander. Perfect For Cabinet Makers. Luthiers, Picture Frame Makers, Metal Workers, Body Shop Panel Fabricators, Die Makers. Tool Repair Shops& More. Just About Any Craftsperson Will Find Many Uses For This Sander-Grinder. Great For Sharpening Lathe Bits. Turning Tools, Milling Cutters, Axes, Mower Blades, Knives& Similar Items To A Perfect Edge. Can Be Adapted For Polishing Small Parts& Buffing Wood Finishes. See Later In The Listing For How To Make Your Own Polishing Belts& Buffs For This Sander Grinder.
|
|
|
Rockwell-Delta 31-520 Sander/Gringer
Rockwell- Delta Sander/ Grinder Model 31-520 S/N EX6913. Good working order. This is a 240/480 volt 3 phase motor. Motor recently replaced with a Dayton(Grainger) 1 HP motor. Unit will need a new OFF/ON switch as this one was removed and installed on another unit. All wiring is in place only the switch will need wired. This unit weighs about 150# so local pick up only or crating and shipping arranged by buyer. The item is located in Valparaiso. IN
|
|
|
Rockwell Delta lower drive drum BS-219 for 6 x 48 belt sander 31-520 Delta wheel
Rockwell Delta lower drive drum BS-219 for 6 x 48 belt sander 31-520 Delta wheel, Click to View Image Album Click to View Image Album Click to View Image Album This auction is for an original 2-piece Delta Rockwell lower drive drum wheel for a 6 x 48 belt sander. Both halves are marked BS-219. Condition is excellent used. There are no cracks or repairs to the inside webbing. Here's your chance to get an excellent used vintage Delta Rockwell replacement drum drive wheel for your sander. Check my other auctions for additional Delta Rockwell sander parts. PLEASE SCROLL ALL THE WAY DOWN TO SEE MORE IMAGES* Buyer pays shipping. Please email us with any questions you may have. We will be happy to answer. We can also provide additional photos of any area of this item you wish to see. Thanks for looking! PAYMENT TERMS* PLEASE READ BEFORE BIDDING* ... moreWe accept PayPal Payment is expected within 3 days of auction end. Payment I accept the following forms of payment: PayPal Shipping& Handling We package all items well for a safe trip. We use appropriate padding and adequate boxes to insure all items are well-protected. $12.35 USPS Priority Mail® FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Tensioner assembly for Rockwell Delta 6 x 48 sander model 31-520 Delta 31-710
Tensioner assembly for Rockwell Delta 6 x 48 sander model 31-520 Delta 31-710, Click to View Image Album Click to View Image Album Click to View Image Album This sale is for an original Delta Rockwell tensioner assembly that was salvaged off an old Rockwell 31-520 belt sander. I believe it also fits the Delta 31-710 and possibly others. It is complete except for the crank handle. It is in excellent used condition and functional. Here's your chance to get a used tensioner assembly for your Delta Rockwell 6 x 48 belt sander. Check my other auctions for additional Delta Rockwell sander parts. PLEASE SCROLL ALL THE WAY DOWN TO SEE MORE IMAGES* Buyer pays shipping. Please email us with any questions you may have. We will be happy to answer. We can also provide additional photos of any area of this item you wish to see. Thanks for looking! ... morePAYMENT TERMS* PLEASE READ BEFORE BIDDING* We accept PayPal Payment is expected within 3 days of auction end. Payment I accept the following forms of payment: PayPal Shipping& Handling We package all items well for a safe trip. We use appropriate padding and adequate boxes to insure all items are well-protected. $5.80 USPS Priority Mail® Click to View Image Album Click to View Image Album FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
Rockwell Delta riser for 6 x 48 belt sander 31-520 Delta 31-710 cabinet riser
Rockwell Delta riser for 6 x 48 belt sander 31-520 Delta 31-710 cabinet riser, Click to View Image Album Click to View Image Album Click to View Image Album This sale is for a cabinet riser section that came off a vintage Rockwell 31-520 6 x 48 belt sander. It should also work for the Delta 31-710 and possibly others. It is in good used condition with the center circle indent intact and no extra screw holes or modifications. There is some paint loss( see images) This is the section that sits on the slanted base cabinet. It measures 16" x 14" x 5 1/8" Here's your chance to get a used riser section for your vintage sander. Check my other auctions for additional Delta Rockwell sander parts. PLEASE SCROLL ALL THE WAY DOWN TO SEE MORE IMAGES* Buyer pays actual UPS Ground shipping cost from zip code 49504. Simply enter your zip ... morein the calculate shipping field to determine the cost. Please email us with any questions you may have. We will be happy to answer. We can also provide additional photos of any area of this item you wish to see. Thanks for looking! PAYMENT TERMS* PLEASE READ BEFORE BIDDING* We accept PayPal Payment is expected within 3 days of auction end. Payment I accept the following forms of payment: PayPal Shipping& Handling We package all items well for a safe trip. We use appropriate padding and adequate boxes to insure all items are well-protected. Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
DELTA ROCKWELL TABLE SANDER FILER 115 VOLT WOOD SHOP ( LATHE SALE ) shiner, tx.
SET-UP FOR 115 VOLT OR MODIFY TO 220 VOLT! BRAND NAME"ROCKWELL/ DELTA" MADE IN. USA, APPROXIMATLY 8 YEARS OLD THIS MACHINE IS ONE OF SEVERAL WOODWORK MACHINES. RADIAL SAW, WOOD LATHE, METAL LATHE DRILL, ETC. SEPARATE AUCTIONS) RATED WORKING CONDICTION AND IS SOLID HEAVY DUTY INDUSTRIAL MODEL THIS MACHINE INCLUDES STAND BUT MAY SAVE YOU $70.00 SHIPPING. IF YOU EXCLUDE IT MACHINE IS PRECISION BUILT. HEAVY METAL BIDDERS ARE WELCOME TO VIEW OR TEST WIN BIDDER WELCOME TO PICK UP OFF MY DOCK. 412 W. RUNK/SHINER, TX. 77984 OPTION TO SHIP IN PACKAGE 1 AND CRATED PACKAGE2- UPS TO ANY 48 CONTIGOUS STATES- REQUIRES 10 DAY PREPARATION- $140.00 S&H PAYMENT TO MADE WITH PAYPAL OR OK TO MAIL PAYMENT. DUE 5 DAYS AFTER AUCTION THIS IS NOT FOR SALE OUTSIDE OF U.S.A. AMERICAN BUYERS ONLY Powered by The free listing tool. List your items fast and ... moreeasy and manage your active items.
|
|
|
Delta Rockwell 6"x 48" Belt Sander Complete Tension Adjustment Assembly
Complete belt tension assembly for older 6"x 48" Delta Rockwell belt sanders including all mounting hardware and hand crank. All original.and in very good condition.
|
|
|
Rockwell 500 belt sander 4x27 vintage woodworking Vintage Delta 500 belt sander
Up for sale is a nice Rockwell 500 belt sander Porter Cable 500 belt sander. This is a very hard to find piece of vintage woodworking tools. It is a HUGE sander and takes the 4x27 belts. I collect and use vintage woodworking equipment but sometimes I get a few more pieces then I need. I will be selling more tools in the future I stand behind what I sell and if you have a issue then just contact me. I will take returns but shipping is at your expense. I have hundreds of saws so if you need something just call me in the evening after 7PM CDT 309-537-3181. Please note this is a HEAVY item so shipping is a bit higher than usual. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14876993376-0x114-
|
|
|
BEAUTIFUL ROCKWELL-DELTA 6" BELT 12" DISC SANDER 1 1/2 HP 220 3 PH VIDEO LOOK
BEAUTIFUL ALL ORIGIONAL CONDITION AND PAINT. GENUINE ROCKWELL-DELTA 6" BELT-12" DISC SANDER. I BOUGHT A WOOD WORKING SHOP AND THIS WAS PART OF THE DEAL. TAKES STANDARD 6" X 48" BELTS AND 12" PSA SANDING DISCS. SERIAL# EJ-3188. ITS GOT A 1 1/2 HP 220 3 PHASE MOTOR. HAS TILTING TABLES WITH 1 MITER SLIDE. I HAD IT RUNNING TODAY AND ITS PERFECT. THERE IS ONE COVER MISSING AS YOU CAN SEE IN THE PHOTOS. EMAIL WITH QUESTIONS. BUYER PAYS SHIPPING. THANKS KENNY RUMFORD SUPPLY& MACHINERY COMPANY INC. SERVING THE MACHINE TOOL INDUSTRY FOR 55 YEARS
|
|
|
Delta Rockwell 6” x 48” Belt Sander model 31-520 110 V
This is Delta Rockwell Sander b eing retired from use in Public School shop classes. Please read all details. Terms& conditions! Buying this item benfits education! This surplus item is sold on behalf of a local school district. Sale proceeds. Less a sales commission, will be returned to schools. very brief tests were performed: buffer was powered on. Motor ran loudly and had difficulty turning; Motor may need replacement. sorry for the lack of photos. This item is shown stored on a pallet with other Delta items available in separate listings. this listing is for the Sander ONLY! Local Pickup Only; Primary Pickup Days are: Wednesday. November 12, 10:00 AM- 12:00 noon Wednesday. November 19, 10:00 AM- 12:00 noon Please read before bidding! Summary of terms& pickup conditions: details below) There will be two primary pickup days in ... moreBaltimore/ Middle River. Maryland, 21220. School personnel will load your item using their forklift. These are surplus goods and are sold“As Is. Please take a look at our other items for sale from this and other area schools. We ask that every effort be made to pick up your item on the pickup days shown above. This is to prevent the confusion of multiple buyers coming onto school property on different days to pick up many different items! We will work within reason to accomodate pickup times. Particularly for buyers coming from long distance, buyers who have hired a professional trucking company or buyers of large, complex items. This location is only open Weekdays, 9:00- 2:00. Weekend pickups cannot be arranged. Items cannot be held for lengthy amounts of time after purchase; such situations will result in cancellation of the purchase. This item is located on school property in Baltimore/ Middle River. Maryland 21220. Buyer will be given the pick up address only after payment to avoid possible interruptions on school property while the item is listed. Maryland residents will be charged 6% sales tax on their eBay invoice unless tax exempt status is proven. Scho
|
|
|
DELTA ROCKWELL 6" BELT SANDER FINISHING MACHINE TABLE + TRUNNION CAST BS 206 207
Rockwell Delta Tilting Table- Part BS 206 With Trunion- Part BS 207 This came from a Rockwell 31-710 6" Belt and 12" Disc Finishing Machine. Good condition. See pictures. The pieces are together but I may take them apart for shipping.
|
|
|
MA C ROCKWELL DELTA 12' DISK DISC SANDER WITH TILTING TABLE 115 VOLTS SEE VIDEO
ROCKWELL DELTA 12' DISK SANDER WITH TILTING TABLE. 115 VOLT. DATA PLATE IS MISSING SO DON'T KNOW MODEL OR HORSE POWER. WORKS GOOD VERY STRONG MOTOR BUT SOME TIMES MOTOR NEED TO BE SPINED FOR IT TO START. QUESTIONS CALL JUSTIN 619-253-6499. YOU ONLY GET WHAT IS PICTURED AND DESCRIBED IN AD AND NOTHING ELSE. IF I CAN I TEST EVERYTHING BEFORE SHIPPING TO MAKE SURE IT WORKS BEFORE YOU GET IT. IF IT DOESN'T WORK WHEN YOU GET IT. IT IS YOUR RESPONSIBILITY TO REPORT IT TO THE SHIPPING COMPANY AND I WILL NOT BE HELD RESPONSIBLE IF YOU DO NOT. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL ... moreYOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $50.00 PACKAGING COST FOR VERY LARGE ITEMS PALLET ECT. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO W
|
|
|
VINTAGE DELTA ROCKWELL 6 X48 BELT SANDER TRUNNION CASTING PART BS207
VINTAGE DELTA ROCKWELL 6 X 48 BELT SANDER TRUNNION CASTING PART NUMBER BS207 OR BS 207. SOLID WITH NO CRACKS OR WELDS. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
|
|
|
3 phase Rockwell Delta Belt Sander with factory steel frame
Sander is in great condition. Price includes a newer 80 grit belt on machine. It is a floor model and can change from vertical to horizontal sanding. Due to weight of machine, pick up will be needed.
|
|
|
VINTAGE DELTA ROCKWELL 6 X48 BELT SANDER LOWER DUST COVER/COLLECTOR
This one is more of a project. But these are hard to find and somebody with some skills could fix this up and put it back to work. It is broken in two places. One piece is there. And needs to be welded back on. The other is missing, and will need to be fabricated. Missing the screws that hold the interior dust deflector. Part no. BS 209. As pictured.
|
|
|
Rockwell Delta 6" Belt Sander # 31-520 Serial FX1517 Casting # BS 201
Rockwell 6" belt sander base casting# BS201. Used in excellent condition. Original grey factory paint and original model number plate. Please research to make sure that this is the part that you need. Ask questions before bidding. If bidding from a country other than the US. Please ask for a shipping quote. I combine shipping if buyer requests this in a timely manner. Size: 13" X 8" X 2" and weighs 9 lbs. I ship by standard shipping unless USPS Flat Rate Box cost is less.
|
|
|
Delta ROCKWELL OUTSIDE SHIELD FOR 6" BELT SANDER
Delta ROCKWELL OUTSIDE SHIELD FOR 6" BELT SANDER. THE SHIELD IS IN GOOD WORKING CONDITION. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE SHIELD. IT SHOWS MARKS WHERE THE BELT HAS WORN INTO THE SHIELD.
|
|
|
Delta ROCKWELL DUST PORT FOR 6" BELT SANDER
Delta ROCKWELL IDLER DRUM ASSEMBLY FOR 6" BELT SANDER. THE PORT IS IN GOOD WORKING CONDITION. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE PORT. IT HAS BEEN PAINTED BEFORE AND COULD USE REPAINTING.
|
|
|
Rockwell Delta 6 x 48 Belt Sander Drive Shaft
Normal 0 false false false MicrosoftInternetExplorer4 Rockwell Delta 6 x 48 Belt Sander Drive Shaft# 406-03-106-002. Used. In very good condition.
|
|
|
ROCKWELL DELTA Oscillating Wood Shaper Sander REFIRBISHED
Office: 830-775-2580 Our Asset# KSC631/ 162 Qty available: 1 ROCKWELL DELTA Oscillating Wood Shaper Sander REFIRBISHED Gallery Photo Appraised Value FOB our location: $950.00 Price With Free Shipping to lower 48 States: Note: All free shipping is quoted to BUSINESSES WITH DOCKS. FORKLIFTS OR FOR PICKUP OR AT LOCAL TERMINAL If there is no price above please contact us for shipping quote as shipping prices vary greatly on freight items. NEW REPLACEMENT COST OR WHEN NEW: Click here to view our profile: Manufactures Tag: DELTA ROCKWELL 43-34- DK 6100 Manufacturer: Model: Serial# Year: HP/Amp/KW/KVA: Voltage: Phase: Other Info: General Photos: Background Our attempt to answer buyer questions in advance or to give a little history as represented to us. We are not making any representations simply passing along 3rd party info. Inspections are our ... morefindings only and not representation of fitness for a purpose 4. Used: Tested in our shop Inspection 14 Day Money Back Guarantee with Yellow Tag! Factory Information* King Surplus is not making any representations. Warranty of merchantability or any implied warranty of fitness for a particular purpose. For reference only: We offer Assistance Shipping& Packaging Worldwide as follows: 1. All shipping is quoted to BUSINESSES WITH DOCKS. FORKLIFTS OR FOR PICKUP OR AT LOCAL TERMINAL. 2. All PayPal payments require us to ship to address shown on PayPal and not on your account. Please make sure you add the correct delivery address to your PayPal account. 3. RESIDENTIAL& LIGHT COMMERCIAL ITEMS: Residential delivery for items under 70 lbs that can be shipped via USPS. UPS or FedEx will require additional services averaging about 10 dollars to deliver. Palletized freight items, bulky items or items that weigh more than USPS, UPS or FedEx will take, must go freight. 4. ACCESSORIAL FEES: Delivery to non-commercial areas. I.e. farms, business' that require liftgates, home business' or residential areas require additional fees charged by freight carriers to deliver in residen
|
|
|
Delta Rockwell 6x48 Belt Sander Idler 4" Pulley
4" Idler Pulley from a Delta Rockwell 6x48 belt sander. Other parts available as well. Will combine shipping where possible
|
|
|
Delta Rockwell 6x48 Belt Sander tracking/Tension Mechanism
Used tension assembly parts from a Delta Rockwell 6" x 48" belt sander. Good condition. See pics for details. Includes what is in the pics. I have other 6x48 parts. Please see my other listings. I will gladly combine shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14a8911e6ec-0x10a-
|
|
|
Delta Rockwell 6x48 Belt sander Pulley Cover
THIS ROCKWELL DELTA BELT SANDER BELT COVER 6 X 48 FROM MODEL 31-520; GOOD USED CONDITION. LOOKS LIKE ITS BEEN REPAINTED SOMETIME IN ITS LIFE. Check my other listings for more 6x48 sander parts
|
|
|
Delta Rockwell 6x48 Belt Sander Table Stop
This is the table stop for the Delta 6x48 belt sander. This stops the table from going below the desired table level.
|
|
|
DELTA ROCKWELL 6 X 48 BELT SANDER 1.5 H.P. MOTOR OTHER MACHINES PER SPECS
CAME FROM 6 X 48 DELTA COMBO SANDER THIS MOTOR HAD A LITTLE EXTERIOR GRINDING GRIT ON FRAME. RAN WELL AS IT WAS TOTALLY ENCLOSED MINIMAL DIRT. I DIS'ASSEMBLED AND CLEANED INSTALLED NEW NTN DOUBLE SEAL BEARINGS- STARTER CONTACT CLEANED. RE-ASS'M AND PAINTED. I RE-BUILD MOTORS AS A HOBBY AN DUSED ALL PROPER TOOLS I.E PRESS, PILOTS, ELCTRO-KLEEN ETC. SPECS. DELTA# 62-129 MFG BY MARATHON ELEC. 1.5 H.P. DUAL VOLTAGE 110V/220V 16.8/84 AMPS TOTALLY ENCLOSED FRAME 56-70 5/8" SHAFT(MIKES.6247/6245) EXCELLENT 3/16 KEYWAY-FEW SMALL SET SCREW MARKS ON BOTTOM OF KEYWAY(8-SOME ONE DIDN'T USE KEY) NO HARM-COSMETIC SHAFT LENGTH 2 5/16" 3 7/16" BASE TO SHAFT CENTERLINE MOTOR IS 12 1/2" O/A LENGTH SHAFT 9" FROM BASE TO TOP OF CAP. SEE PHOTO FOR MOUNT SPECS. VERY NICE MOTOR THRU-OUT CAN BE WIRED EITHER ROTATION OR VOLTAGE ... morePER FULLY LEGIBLE NAMEPLATE- EASY CHANGE OVER BENCH TESTED- SMOOTH AND QUIET. EMAIL WITH ANY?S SHIPPED IN WOOD LINED BOX WITH FILLER
|
|
|
Rockwell Delta 6 x 48 Belt Sander Model 31-520- NO MOTOR
Rockwell Delta 6 x 48 Belt Sander Model 31-520- NO MOTOR THIS SANDER IS USED AND HAS NO MOTOR. SEE PICTURES ABOVE AND DETAILS BELOW FOR FURTHER DESCRIPTION AND OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: LENGTH: 16.5" WIDTH: 21" HEIGHT: 57.5" SHIPPING WEIGHT: 214 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR WAREHOUSE(19522) FACILITY. SHIPPING: WILL SHIP VIA FREIGHT GROUND TO ALL UNITED STATES.CANADA, AND MEXICO. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. INTERNATIONAL BUYERS PLEASE CONTACT US FOR A QUOTE. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ... moreALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPO
|
|
|
Delta/Rockwell 6" belt and 12" Disc sander/finishing machine
Hello all. My name is Rog; I am a part time wood worker/auction picker. I will be offering tools(primarily woodworking hand tools) from time to time that in some cases may be rare to good solid users. I will do my best to describe all items to the best of my ability, but I am by no means an expert. If after you view the pictures of an item and you believe I have not been accurate in my description, please let me know. I will make every effort to get it right. There will always be plenty of pictures and I do answer questions. Returns will be on a case by case basis, but I do not accept returns because of buyers remorse. Ebay is a feedback driven sales site for buyers and sellers. As a rule, I will leave honest feedback for a buyer once honest feedback is received, that said; if for some reason you are unhappy with your purchase, please let ... moreme know. Here we have a Rockwell/Delta 6" belt and 12" disc abrasive finishing machine. It is equipped with a 2 HP delta motor. 240 volt. I purchased the sander one and a half years ago in Phila. I believe it was used in an industrial setting, but that is a guess. Documentation shows machine was purchased new in January 1984. I took the motor to my local re-builder and had it cleaned and new bearings installed, runs great. The on/off switch(an old furnas 12BAT) finally gave out a month ago, so I hard wired it to make sure that was the problem. I took the switch apart, you can actually rebuild them, you just need a little brass to fabricate a new connector if your handy, or you can purchase a replacement switch from"the Saw Center" for about $60.00. It has 2 extra belts and 2 extra discs included in sale. It's missing the"idler drum guard" on the belt section and the belt section does not have a table, but it does have a backstop. This is another one of those machine pieces that is taking up too much room for the use I'm
|
|
|
Vintage combination sander, 12" disk 6" belt. Maybe a Delta Rockwell heavy duty
Up for auction is a large 12" disk and 6" wide belt. Combination sanding machine. This machine runs well and quietly. It is wired for 110 V home workshop use. The disk and belt's bearings turn smoothly with no slop or play. I don't know the brand since there is no maker's name on it. The 12" diameter disk is made from aluminum and is about 3/8" thick. It has a table that can be angled and includes a miter gauge. The 6" wide belt also has a tilting table. It's table runs parallel to the belt as shown in the photos. Also, the table for the disk can be bolted onto the belt's location for use there when the belt is vertical. But you need to remove the belt's side table to do so. The sanding belt on the machine now has a rip in it and is pretty used up. I don't have any new belts or disks for ... morethis. This is more sanding machine than I need. I have a smaller one and it is sufficient for the little bit of wood working that I do. There are some extra parts included. There is an extra tilting table but it's missing the tightening knob. Also an additional top section of the sanding belt cover. I think the guy I got this from may have had a second sander to use as a parts donor and that's where these extras come from. They are included if you want them. The sanding belt cover shown is definitely not the original. It is shop-made and is not a perfect fit. But it seems to do the job. A hole for attaching a dust collecting system can probably be cut in it for your shop work. And lastly the motor could stand to be upgraded to something more powerful it is currently 1/3 HP. Thanks for checking out this auction and feel free to ask questions. Good luck and have fun bidding! Delivery: I may be willing to deliver this item if you pay(in advance) $1.50 per loaded mile. This means if you live 100 miles away the cost will be $150.00($1.50 x 100 = $150.00) The mileage distance is measured online by"Yahoo Maps" or"Mapquest" from my location(New Rochelle. NY
|
|
|
Delta/Rockwell 6" Belt 8" Disc Sander 31-710 1.5HP 3PH with Dust Collector
SKU: 2471565 A: 0013000000CXCfg O: 0065000000TxrFv PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Delta/Rockwell 6" Belt 8" Disc Sander 31-710 1.5HP 3PH with Collector This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great buying formats to serve you– Bid Now Auctions and Fixed Price Buy Now listings. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles, industrial machine tools, general rental tools and other heavy equipment. View our Fixed Price store- also featuring construction machinery. Fleet vehicles& other industrial equipment in a convenient Buy It Now(or Best Offer) format. ... moreBid with confidence- 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Request Freight Estimate button above. Overview: Make: Delta/ Rockwell Model: 31- 710 Type: Dual Disc and Belt Sander Serial No: JP4119 Features/Specifications: Motor: 1.5 HP- 230V 3450 RPM- 60 Hz- 3 PH 12" Disc Table Size: 16" x 7" 6" Belt Sander: Table Size: 15" x 7" Rockwell Dust Collector: Model: 54 Baldor Motor Model: L1606M 3/4HP- 115/208V- 9.8/4.9A 3450RPM- 60HZ- 3PH Dimensions& Weight: Dimensions: L 41" x W 29" x H 58" Shipping Weight: 706 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. View Photo Galle
|
|
|
Rockwell Delta Belt Sander Parts # 406-03-088-2001 9" x 2" Flat Rest Surface.
Nice Used Rockwell Delta Belt Sander Parts# 406-03-088-2001 9" x 2" Flat Rest Surface. You are purchasing the actual item in the photo's. Free shipping in the 48 Continental States of America.
|
|
|
1959 Rockwell Delta 12" Disc Sander
1959 Rockwell Delta 12" Disc Sander. Model 1426 or 31-122. Not sure which because it changes somewhere in the late 50s to early 60s. Serial Number CD 7349. Runs great. Has a single phase 1/2 HP 1725 RPM motor. Currently running at 115 volts but can be wired for 230 volts.
|
|
|
Rockwell Delta 8" Bench Disk Sander disc
This Rockwell Delta 8" bench disk sander is solid American made cast iron. It's grubby but works smooth. Includes only what's shown in the photos. i.e. it does not include a motor or stand but does include the drive pulley. Buyer pays actual shipping cost only with no additional packing or handling charges.
|
|
|
DELTA ROCKWELL (31-520 ??) BELT SANDER 6 X 48 115 3/4 HP Original Motor
DELTA ROCKWELL BELT SANDER 6" X 48" 115 3/4 HP Original Motor in working condition as shown in pictures. The belt guard and support dust and drum guard are broken. Also the adjusting plate handle is missing. Shipping will be FREE LOCAL PICK UP or $150 Domestic Continental Freight plus $40 Lift-gate fee in case it is needed. COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the ... moreitem or refund your money if there is a problem that we cannot fix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. Mycyberoffice.com eBay Store Visit My eBay Store: MyCyberOffice The place for all your tools. Military surplus and much more needs Visit my eBay Store: MyCyberOffice
|
|
|
Rockwell/Delta 31-710 6" Belt Sander 12" Disc (last time listing item on ebay)
Rockwell/ Delta Belt Sander 6" Belt 12" Disc. This thing works great and is ready to run. Local pickup from north Long Beach. on pallet. If you want it shipped(YOU) setup the shipping and pick up. forklift available for loading if truck doesn't have a lift gate. This machine has been owned by a very well respected company in the injection molding industry and has been used but not abused. We are the original owners. THIS WILL BE THE LAST TIME I LIST THIS SANDER ON EBAY)
|
|
|
Rockwell Delta 31-426 12" Disc Sander with Short-Stop Motor Brake
Rockwell 12" disc sander model 31-426 230 volt 3 phase motor. Serial number EE6123 puts this as a 1968 model. This sander comes complete with disconnect. Motor starter and a very nice feature the Short-Stop electronic motor brake. This alone is a $1,000 part. This sander can be wrapped and shipped via motor freight. Local pickup much preferred.
|
|
|
Delta Rockwell 31-350 1 x 42 Belt Sander Grinder W/ Original Stand
Delta Rockwell 31-350 1" x 42" Strip Sander/ Grinder Made In USA This machine is in good used condition and includes the somewhat rare Cat.No. 50-106 open legged steel stand. The sander does not have a serial number badge but I'm guessing it dates from around the late 1960's to early 1970's. All four wheels are brand new aftermarket replacements which ran me about $80. The cast iron table is patinated but not pitted and shows little sign of belt damage. Platen is in great shape. It is powered by a Delta Rockwell 3/4 HP. 3450 RPM motor and is controlled by a pull rod switch. V-belt should probably be replaced. Runs and tracks great. Ready for work. This machine is located approximately 30 minutes north of Milwaukee. WI and is local pickup only. I can hold for a short period of time with full payment. Questions are welcome ... moreand additional pictures available upon request WI Residents add 5.6% sales tax
|
|
 |