Geared Head Engine Lathe Cnc Turning Center Lathe Fanuc Cnc Turning Center Lathe Tailstock Emco Unimat Sl Db Lathe Emco Unimat Sl Db Daewoo Puma Chuck Fanuc Gap Bed Engine Lathe Doosan Puma Swiss Cnc Lathe Toolroom Lathe Cnc Lathe W Live Haas Cnc Lathe Cnc Lathe Live Leblond Regal Sub Spindle Geared Head Cnc Lathe Live Tooling Cnc Swiss Haas Lathe Engine Lathe Model Engine Lathe W Taper Chuck Tailstock Lathe Live Tooling Swiss Cnc Cnc Gang Live Tooling Gap Bed Lathe Swiss Lathe Genuine Emco Unimat Sl Db Mazak Cnc Lathe Genuine Emco Unimat Gap Bed Heavy Duty Engine Lathe Clausing Colchester Mori Seiki Lathe Mazak Quick Bed Cnc Gap Lathe Toolroom Engine Lathe Daewoo Doosan Mazak Lathe Leblond Engine Lathe Cnc Lathe W Fanuc Mori Lathe Lathe W Taper Attachment Bore Cnc Swiss Type Cnc Lathe Lathe Fanuc Taper Attachment Lathe No Reserve American Pacemaker Okuma Cnc Lathe Fanuc 0T Chip Conveyor 40 Geared Head Teach Lathe Okuma Lathe Rigid Tap 2-Axis Cnc Cnc Turning Center Lathe Mazak Slant Haas Sl-30T Mazak Cnc Chucker Lathe Hardinge Hlv-H Lodge Shipley Bench Lathe Emco Unimat 3 Chk Tailstock Haas Sl-20T Cnc Bar Feed Live Milling Geared Head Gap Bed Super Precision Milling Center Monarch Lathe Fanuc Ot Precision Toolroom Lathe Lathe Tooling Automatic Screw Machine Slant Bed Bridgeport Romi Live Tools Bar Feeder Sl-30T Cnc Live Tool Mori Seiki Doosan Lynx Thru Hole Miyano Fanuc 18T Genuine Emco Unimat Sl Db Lathe 15 Chuck Bar Loader Okuma Howa Okuma Cadet Haas Cnc Vertical Turret Lathe Fanuc 0T Control Bar Capacity Mazak Integrex Presetter Tailstock 00 Chuck Hardinge Conquest Live Tooling Sub Spindle Myford Hitachi Seiki Steady Rest Inch Metric Warner Swasey Center Live Tooling Collet Closer Gear Head Lathe South Bend 16 Boxford Hardinge 3C Collet Super Quick Tail Stock Mini Lathe Small Lathes 10 Chuck 12 Chuck 13 X 40 14 X 40 16 Inch 2 Axis 2 Chuck 3 Jaw Chuck 3 Phase 4 Axis 4 Inch 4 Jaw Chuck 5 Swing 5C Collet 8 Chuck Atlas Atlas Lathe Axis Cnc Brown Sharp Clausing Cnc Cnc Control Cnc Lathe Cnc Manual Cnc Mill Cnc Turning Center Cnc Vertical Coventry Half Inch Die Box Threading Craftsman Cutting Tooling Die Box Threading Chasers 1 Die Box Threading Chasers Iso Emco End Mill Engin Lathe Engine Lathe Fanuc Control Flat Bed Gang Tooling Grinder Grizzley Metal Lathe Grizzly Haas Half Inch Die Box Threading Chasers Hardinge Hardinge Lathe Harrison Heavy Duty Inch Die Box Threading Chasers Industrial Jaw Chuck Jet Lath Lathe 10 Lathe 12 Lathe 15 Lathe 16 Lathe 2 Lathe 20 Lathe 3 Lathe 4 Lathe 6 Lathe Milling Lathe Model Lathe New Lathe Parts Logan Logan Lathe Low Hours Machine Center Machine Shop Machines Manual Lathe Manufacturing Metalworking Mazak Metal Lathe Metal Working Tools Metalworking Equipment Micro Mill
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
24.99
6d 16h 37m 20s
0 bids
Condition: Used
Location: Auburn, United States
Click to view the detailed equipment information of this item. bidadoo is the largest and most trusted online auction company delivering weekly no-reserve ... moreauctions of backhoes, skid steers, excavators, lifts, trucks, trailers, industrial tools and more.
$
12990.00
Buy It Now
$495.00 Shipping
Condition: New
Location: Dover, United States
WorkFar V3 Humanoid Robot. WorkFar Robot Teaser Video. 22 Degrees of Freedom WorkFar V3. • WorkFar V3 Humanoid Robot Clearance Sale - 50% Off ! Works ... morein Automatic/Semi-Manual Mode only; Full-Manual Mode Not Installed in this Clearance sale (See our Website).
$
2999.00
Buy It Now
$48.00 Shipping
Condition: Used
Location: De Pere, United States
$
1000.00
Buy It Now
Free Shipping
Condition: New
Location: Martinsville, United States
1 set of 2 female adapters included 1-1/2" steel VOLVO 120 female adapters - mounts are cnc plasma cut Make any attachment a VOLVO 120 attachment with ... morethese adapters CL top hook to center of pin hole is 24.26" Bottom Pin hole diameter is 1.98" 135 lbs per adapter 39.36 center line spacing These ship on a pallet, to a commercial address, you must have equipment to unload. Additional $50 for residential delivery. * Your shipment will include a notify. An appointment clerk will call you to set up a delivery appointment to make sure you are available with equipment to unload. Unsure if this will fit your loader? Give us a call or send us a message, and we can help make sure you get the mount you need! Want to see more? Check out our other products by clicking on this link: [https://www.ebay.com/str/expresssteel] (https://www.ebay.
$
24300.00
Buy It Now
Condition: Used
Location: Houston, United States
HYSTER S120FT FOKLIFT. Make: Hyster. Year: 2016. CUSHION TIRES. Watch this video Model No.: S120FT. Talk to one of our Machinery experts to get a price ... morequote and more information. Condition: Very Good.
$
1489.00
Buy It Now
$100.75 Shipping
Condition: New
Location: De Pere, United States
Part No: HF303S.
$
207.06
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
JOHN DEERE 1025R rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
196.19
Buy It Now
$69.35 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX23S front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
47.21
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
APPLICATION Three are used on Catetpillar C-15,C-16. But each can be used on many other models of CAT. REPLACEMENT The Engine Barring Socket is Similar ... moreto Factory Tool J-38587-A, and the Automatic Engine Timing Pin is alternative to J-42083, 139-7064 (adapter for C11), 220-2793, 136-4632. ( C-11 and C-13 require adapters 139-7063 or 139-7064 depending on the application.)Alternative to 9U-7227,properly maintain the Caterpillar Injector height. FUNCTION.
$
261.53
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX23S rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
352.06
Buy It Now
$90.15 Shipping
Condition: Brand New
Location: Rowville, Australia
KUBOTA B2601 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
34500.00
Buy It Now
Condition: Used
Location: Santa Paula, United States
MAKE: GEOBOY. MDL: HD250. SPECIFICATION SHOWN ARE TO BE USED. we reserve the right to relist the item without further notice. -SHREDDER ROTOR IN GOOD ... moreSHAPE. Purchasing Information BE RESPONSIBLE FOR ERROR OR OMISSIONS.
$
196.16
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX2380 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
123.44
Buy It Now
Free Shipping
Condition: New
Location: China
For 1/10 Traxxas MAXX Stainless Steel Chassis Armor Skid Plate Guard Parts USA. l The operation of replacing the fork bucket is simple. Players only need ... moreto unload the original bucket and install the fork bucket.
$
28.49
Buy It Now
Free Shipping
Condition: New
Location: China
Milling machine parts shifting gear fork B63. Automatic feed speed plastic fork. Feed change fork.
$
112.35
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
REESE 74294. JOHN TILLMAN & CO 1338M Gloves,PR PK 6. 10,000, Ball Dia. 2 5/16 in, Shank Dia. 1 1/4 in, Shank Length (In.). Hitch Ball,2-5/16 In. GRAINGER ... moreAPPROVED IBI-20 Hanging Strap,10 Ft L,Galv Steel.
$
79.50
Buy It Now
$16.46 Shipping
Condition: New
Location: Warren, United States
10L1102 Up for sale s a hagglunds denison directional valve new in box marked 026 32157 H A4do 135 151010100A5G 0Q327. this type of valve was used on ... moremany old cnc applications and other hydraulic applications. buyer to pay shipping and packing calculated to your usa location. see our store for more stuff like this Thank you RWK
$
2880.00
Buy It Now
$295.00 Shipping
Condition: New
Location: Hagerstown, United States
Great for lifting products & materials to feed into CNC and other machines at a specific height, or simply as a lifting work area. Powerful Lift + Work ... moreTable all in one! - Lift height: 9" - 39". - 110v/ 115v/ 120volt Electric Cord powered.
$
3750.00
Buy It Now
$379.00 Shipping
Condition: New
Location: Hagerstown, United States
BigBlue HW Stationary Lift Table 48" X 68" X 40" 8000lb. Large Work Table & Powerful Lift. - 110/ 115V/ 120V Electric Cord powered, regular plug. -Actual ... moretable size: 47.25" x 67". Great for lifting products & materials to feed into CNC and other machines at a specific height, or simply as a lifting work area.
$
239.67
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX1860 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
457.68
Buy It Now
$97.08 Shipping
Condition: Brand New
Location: Bayswater North, Australia
You are buying one set of 4 wheel spacer suitable for KUBOTA BX25, BX24 and BX23.
$
159.00
Buy It Now
Free Shipping
Condition: New
Location: Orlando, United States
When the front and rear mounting holes are not suitable, you can directly drill holes on the slide. Aluminum mold- Computer-aided design, CNC precision ... moreprocessing mold standard, smooth foam, straight lines.
$
174.37
Buy It Now
$69.35 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX1800 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
261.53
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
You are buying one pair 3" wheel spacer suitable for KUBOTA BX25, BX24 and BX23 rear wheels. Suitable for REAR wheels. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia.
$
1555.00
Buy It Now
$95.00 Shipping
Condition: New
Location: Cottage Grove, United States
This new Rock Crusher from K&M Krushers. These crushers are the next generation of crushers. All of the critical parts are cut out with a CNC Laser cutter ... moreto insure everything is square and precise.
$
336.80
Buy It Now
$90.15 Shipping
Condition: Brand New
Location: Rowville, Australia
KUBOTA L1802DT rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
250.65
Buy It Now
$69.35 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX23S front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
2350.00
Buy It Now
$348.00 Shipping
Condition: New
Location: Hagerstown, United States
Great for lifting products & materials to feed into CNC and other machines at a specific height, or simply as a lifting work area. - Lift height: 8" - ... more39.5". - 110v/ 115v/ 120volt Electric Cord powered.
$
592.47
Buy It Now
$100.00 Shipping
Condition: New
Location: Minooka, United States
Pltfrm Lift, 220 lb. Cap.73-1/4 In H. GRAINGER APPROVED 53701 8 Stndrd UBolt w Plate, Inside H 4 1/2 in. OSG 2841201 Spiral Point Tap,5/16"-24,HSS-E. ... moreDiversion contrary to U.S. law is prohibited. Grainger Part #:2MPU2.
$
92.60
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
BULLDOG 500246. JOHN TILLMAN & CO 1338M Gloves,PR PK 6. GRAINGER APPROVED IBI-20 Hanging Strap,10 Ft L,Galv Steel. Grainger reserves the right to accept ... moreor reject any order. Diversion contrary to U.S. law is prohibited.
$
217.51
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
AIRLOC 1.15200.68. Leveling Mount, Internally Leveled, Leveling Mount Type Anti-Vibration, Thread Size M24, Base Dia. 8 1/16 in, Load Capacity 5400 to ... more7200 lb, Height 9.125 in, Bolt Length 7 in, Nitrile Base, Nitrile Construction.
$
50.99
Buy It Now
Free Shipping
Condition: New
Location: Covington, United States
The CURT vertical trailer hitch adapter is designed to turn a vertical receiver into a standard ball mount platform or horizontal receiver tube. and a ... moretongue weight capacity of 500 lbs. It has a length of 4-1/4" and a drop of 2-7/16".
$
56.98
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
APPLICATION Three are used on Catetpillar C-15,C-16. But each can be used on many other models of CAT. REPLACEMENT The Engine Barring Socket is Similar ... moreto Factory Tool J-38587-A, and the Automatic Engine Timing Pin is alternative to J-42083, 139-7064 (adapter for C11), 220-2793, 136-4632. ( C-11 and C-13 require adapters 139-7063 or 139-7064 depending on the application.)Alternative to 9U-7227,properly maintain the Caterpillar Injector height. FUNCTION.
$
280.33
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
You are buying one pair 3" wheel spacer suitable for FERGUSON GC1720 rear wheels. Tread size: 1/2" x 20 UNF. Suitable for REAR wheels. 2- Bank Deposit.
$
49900.00
Buy It Now
Free Shipping
Condition: Used
Location: Signal Hill, United States
Scan up to 110 m away with this professional LIDAR solution. Artec Ray 3D Scanner. As a result, data capture is noticeably cleaner than that from other ... more3D laser scanners, with noise levels at an absolute minimum.
$
10.07
Buy It Now
$5.03 Shipping
Condition: New
Location: 鼓楼区, China
$
207.06
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX23S rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
207.06
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX1880 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
14.88
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka, United States
Hinge Strap,6" L,Unfinished. Hinge Strap, Length 6 in, Finish Unfinished, Manufacturers Warranty Length 1 yr. Jurisdictions have varying laws, codes and ... moreregulations governing construction, installation, and/or use of products for a particular purpose.
$
626.19
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
AIRLOC 3.07252.70. Vibe Iso Pad, 19 11/16 x 39 3/8. Vibration Isolation Pad Sheets, Material Nitrile, Max. Use it whole or cut to a custom size. Order ... moreAcceptance. Grainger reserves the right to accept or reject any order.
$
207.06
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX2680 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
185.21
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX2350D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
185.21
Buy It Now
$69.35 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX23S front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
196.16
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX23S rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
196.19
Buy It Now
$69.35 Shipping
Condition: Brand New
Location: Bayswater North, Australia
Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
$
352.06
Buy It Now
$90.15 Shipping
Condition: Brand New
Location: Rowville, Australia
KUBOTA L1802DT rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
185.21
Buy It Now
$69.35 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX2200D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
207.06
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
You are buying one pair 2" wheel spacer suitable for KUBOTA BX25, BX24 and BX23 rear wheels. Suitable for REAR wheels. The item made from forged aluminium. ... moreDesigned and CNC machined in Australia.
$
261.53
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX1880 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
196.16
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX24D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
196.16
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX25 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
$
344.43
Buy It Now
$90.15 Shipping
Condition: Brand New
Location: Rowville, Australia
KUBOTA B2601 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
196.16
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX25D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
352.06
Buy It Now
$90.15 Shipping
Condition: Brand New
Location: Rowville, Australia
KUBOTA B26 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
$
228.84
Buy It Now
$69.35 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX2360 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
207.06
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX1800 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
207.06
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX25DLB rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
261.53
Buy It Now
$83.21 Shipping
Condition: Brand New
Location: Bayswater North, Australia
KUBOTA BX2380 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
$
27.16
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka, United States
REESE 85060. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, ... moreand/or use of products for a particular purpose.
$
618.71
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
AIRLOC 2.00425.70. Vibe Iso Pad, 19 11/16 x 39 3/8. Vibration Isolation Pad Sheets, Material Neoprene, Max. Use it whole or cut to a custom size. Order ... moreAcceptance. Grainger reserves the right to accept or reject any order.
1 2 3 4 5 6 7
 In 

Past Items  
 
Paxton Patterson CNC Training Lathe. Model HP Lathe Condition: Good. Has some minor marks& scratches on housing surfaces Does not come with any other accessories aside from what is shown which includes: spindle head. Collet/tailstock, cross slide/tool post with positioning servo motor Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
We are selling our Haas HL-1 CNC lathe as we no longer use it. The machine has low hours. Has not been abused, and has tool holders and tools to go with it! I am also including 3 sets of soft jaws and one set of stepped jaws. We can load it onto a flatbed at no charge. Shipping and set up is buyers expense. I recommend using a trailer with air ride.Machine can be view under power at our facility or buyer can arrange inspection through Selway Machine in Portland OR. Our facility is 1 hour from PDX. Machine Hours- Servo:4687/ Motion: 6463/ Spindle: 6991 Call Garin if you have any questions@ 541-399-3613 Machine specifications. Date of Manufacture– 6/98 Swing over front apron 20” Swing over cross slide 9.5” X Axis travel 8.45” Z Axis travel 20” Rapid traverse rate all axes 710 IPM Spindle Speed 3750 Spindle Motor 15/20HP Spindle nose A2-6 Spindle ... moreBore 3.00” Max bar capacity 2.06” Turret capacity 10 stations Approximate dimensions 120” X 75” x 74” Machine weight 9200 lbs. Equipped with: Haas 32-Bit CNC control with 10” CRT screen RS-232C Port Interface 3.5” Floppy disk drive Quick code programming 8” 3-Jaw hydraulic through hole chuck Rigid tapping The following tool holders are included: THID-3/4 2 3/4" Boring Bar Holder THID-1 1 1" Boring bar Holder THOD-3/4 5 3/4" Tool Holder THER32 4 ER32 Collet Holder TW 1 Tool Wrench
Dynamic Real Machines. Solid Performance. Dynamic Machine Resources offers over 22 years of specialized experience in CNC Gang tool turning centers. We offer an array of brand new cnc lathes as well as“factory rebuilt and refurbished lathes” We were involved with the production of our factory rebuild machines as new machines when they were first built. Now we offer them as factory rebuilt machines. Our principals owned part of this company hence we are authorized and can certify them as an original manfacturer. We know these machines inside and out. All provide superior space efficiency, world class components, high performance and quality output. The Accuslide CNC System shown reflects the complete rebuild that we provide. All machines are made to order. See photo of machines in production) The machine is brought back to original specifications ... moreand all components which do not meet this criteria are either repaired/rebuilt or completely replaced with new components. Below is a list of items that are completely restored as stated above. You can see our website for further info and details www.dynamiccnc.com The Accuslide is extremely economical. It is a solid. Rigid machine offering speed and superior accuracy. It is a complete cnc turning center. We also offer options that can be added to the Accuslide such as spindle positioning for using live tooling for cross drilling and milling. We also have a video on youtube that allows you to see how our gang tool machines work. You can click on the link below. See the GT27-FX on Youtube- This is a GT27 with a number of options- http:www.youtube.com/watch?v=rj5UI2epDKI Mechanical Ballscrews Linear Guideways Spindle Bearings and Seals Collet Closer Bearings and Seals Way covers and Seals New Hardware is installed on the machine. Machine is completely repainted Electrical Servo Motors. Cables and Drives Spindle Motor and Drives All electrical wiring Fagor CNC Controller Spindle encoder Electric push buttons New labels are applied Coolant pump Miscellaneous Items F
Citizen L32 VII sliding head CNC lathe Age 2000 Citizen Cincom CNC control( Mitsubishi Meldas 500) 7 axis Full‘ C‘ axis on main spindle with 8000 rpm Sub spindle with 6000 rpm 4 live drilling spindles 5 turning and forming tool stations 3 back working stations 3 end working stations High pressure coolant LNS Hydrobar Mini Sprint magazine bar loader for 12' bars Machine very well maintained by former owner and by Citizen company.2 more machines available. Machine has recent service and ballscrews at cost of $ 10.000 Full set of photos on request to: office@emtec-cnc.com See machine running at: We will pack the machine into container for safe ocean shipment.Estimated shipping charges to most US mainland destinations is around $ 9000. We offer the machine: BUY IT NOW for $ 70.000 USD or MAKE BEST OFFER Please feel free to call Roger Roberts ... moreanytime on +44.7831.850595
Citizen L20 CNC Swiss lather. Serial#QO649 Buy it now $60.000.00 or make best offer! Mfd. 1998. With LNS express 226 bar loader. Mist buster. Cool blaster. 3 cross live tools. Excellent condition. Inspect the Citizen with Jim Graff! For more information contact Jim at. Phone: 708-217-2476 Fax: 847-400-0790 or iphone facetime Skype name: jimgraff We sell worldwide. Buyer pays loading and shipping. Machines and Tooling must be paid for. Shipped and/or picked up within 7 days of winning bid. We accept payment by wire transfer or company check only. While we sell machines worldwide. Graff Machine Tools is not a shipper or rigger. Please ask your rigger or shipper for an estimate of loading, shipping cost and time. If you do not have a rigger or shipper, we will suggest several companies you can contact.
Acme-Gridley 1-5/8" RB8#85345 with 2 CNC slides Buy it now $39.500.00 or make best offer! With 2 CNC slides(4th& 5th positions) new in 2000 by PMC(Sieb& Meyer. America) 6 cross slides, reaming. Universal chip conveyor. Just out of production. Watch the Acme run! For more information contact Jim at Phone: 708-217-2476 Fax: 847-400-0790 or iphone facetime Skype name: jimgraff We sell worldwide. Buyer pays loading and shipping. Machines and Tooling must be paid for. Shipped and/or picked up within 7 days of winning bid. We accept payment by wire transfer or company check only. While we sell machines worldwide. Graff Machine Tools is not a shipper or rigger. Please ask your rigger or shipper for an estimate of loading, shipping cost and time. If you do not have a rigger or shipper, we will suggest several companies you can contact.
Mazak Quickturn 8G CNC Lathe. Control: EIAT. S/N: 79564. Kitagawa 6” chuck. 3 jaw with 1-1/2” thru hole- full grip, mild steel top jaws. Gang Style Station. No Turret. External Discharge Chip Conveyor. With some tooling. Machine is in Good condition! Part run was finished and now we are no longer needing it. Machine runs great. Nothing missing or taken off. Machine is in good shape for its age and has no known issues before power was removed. The machine has been moved to our warehouse and ready to ship. We had to make room for the next part run operations coming in. This machine would make someone a good machine and at a very good price. If you have any questions please contact us and we will answer to the best of our ability. We have all the manuals to go with it. NOTE: This machine has no tail stock! GOOD MACHINE! We can load machine. ... moreBuyer will need to arrange for pick up and transportation.
We are selling this Emco Maier 220 CNC Lathe. The machine is in excellent condition. It has a Fanuc 16i control. Turret, and Tailstock. It has very little use. I don't think it has an hour meter, but I would estimate about 750 hours. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions. Machine is located in California and is being sold as is. Where is.
Lightly used(Previous original owner claimed 6 months. 1 shift) I used it for 2 years, about 8 hours per week, always using oil for cutting(no rust) Chevalier is a Taiwanese made machine. Approx 6500 pounds. Very heavy built, straight true, better than current Chinese 3500 pounds lathes. Control systems is a PC-based Anilam(still made) Very nice conversational interface and it pretty much adheres to Fanuc G-codes(minimizes POST issues from your CAM system) CNC controlled 3 geared headstock allows for very good range of speed for virtually any application. In addition to gears(31 to 3100 RPM) The motor(10 HP 3 phase) is CNC controlled for accurate speeds. Although this lathe does not have fixed tapping cycles[it does include Thread cycles] I have used a tap in flexible holder with no problem. This is a rather unique tool room lathe in that ... moreit also has a: CNC controlled turret(Dorian Smartdex 20. 8 position) VCMT tools are included] as are boring bar holders and stick holders. Pratt Bernhard Air operated(CNC controlled) collet chuck(B42. No collets included) B42 collets are available from Pratt Bernhard and Hardinge at reasonable prices] Manual 3 jaw chuck. With centering pads(allows for TIR of less than.0005 if you are so inclined) External headstock chiller($3000 option when new) External link(CNC controlled) and plumbing to connect a standard electric pressure washer for 1000 PSI cooling This lathe is still being manufactured.here is a link. All manuals and passwords. Including machine builder passwords to let you add or modify M-codes, change system config, etc. are included. For an additional $1800 I will include a fully transferred licensed of OneCNC XR4 two axis CAD/CAM software. For an additional $1000 I will include a 20HP GWM rotary 3-phase convertor Note that BUYER is responsible for removal/rigging/transport etc. I can help arrange riggers. Or assist with rigging, but I don't have equipment that can lift this lathe.
We are selling one(1) Index CNC Lathe- Model GE65. This machine is being sold"as is" and is not currently running. It is the second of two of this model that we are selling(2 of 2) This auction is for one machine only. There are 6 manuals that come with the machine. As well as one manual provided 3/1/13 direct from Index HQ in Noblesville IN. See pictures. Serial number/machine number GE11193(see pictures for more information) Please email us with questions or to set a time to see our machines that we are selling.
Mori Seiki TL-5 Lathe W/Fanuc2System 5 Control SN N0 60 12"Diameter 3 jaw hydraulic chuck. 4" hole thru spindle,tail stock, extra jaw 8 Position turret. 30HP Spindle Drive Motor.Mitsubishi Electric DL-SCZ 22 K-D Type 220/440V. 2 axis CNC Control with RS-232 port. Spindle 25-2500RPM. Maximum cross travel 12" Maximum longitudinal travel 48" Approximate Weight 14000lbs. Approximate O A L 160"L-R 96" F-B 86"H.
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE WASINO LG60 CNC GANG TYPE LATHE FANUC SYSTEM 3T. 6,000 RPM, HOLDS + 02- 0001, 5C COLLET, AND THIS MACHINE COMES WITH AN ADDITIONAL MACHINE SUITABLE FOR SPARE PARTS Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE FOR MORE INFORMATION PLEASE CALL ED SCHLICK AT: 510 506-1752 M-th cell. Or 510 506-1752 M-Th office 530 336-6813 Fri and Sat WEBSITE LOCATED AT: PACIFICMACHINERYEXCHANGE.COM WAREHOUSE LOCATED AT 3402 ENTERPRISE AVE. HAYWARD. CALIFORNIA 94545* TERMS AND CONDITIONS* SALES Your bid is a contract. If you are the ... morewinning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. For industrial machinery. Please do NOT pay until you are invoiced! PAYMENT TERMS Pacific Machinery Exchange accepts PayPal. Cash, cashier’s checks, wire transfer, and major company checks. Money Orders. Cashiers checks of more than $1,000.00 U.S. Dollars must be sent via FedEx Priority Overnight, UPS Next Day Air or UPS Overnight Certified Mail. Money Orders and Cashiers Checks are to be made out and sent to: PACIFIC MACHINERY EXCHANGE 3402 ENTERPRISE AVE HAYWARD. CA 94545 CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS- unless we receive a valid resale card. EBAY TERMS If a customer cannot or does not pay for an eBay purchase in the specified amount of time. Pacific Machinery Exchange will file a non-paying bidder alert with eBay. We will hold the non-paying bidder responsible for the eBay fees and comm
We are selling this 1997 Romi Bridgeport Powerpath 15. It comes with the turret and tailstock. The machine is in Excelent Condition. Just look at the photos. It was only use at a college for training purposes and was almost never used. The machine is spotless. The controller is very easy to program. It's a steal for the money. Buyer is respondsible for loading. There is a $650 fee to load. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions. Machine is being sold as is. Where is.
CLICK BELOW TO WATCH THE VIDEO OF THIS MACHINE: ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDELENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE ... moreAND ACTION WILL BE TAKEN AGAINST THESE BUYERS THRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL. WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION SPECIFICATIONS: SWING DIAMETER CAPACITIES SPINDLE TRAVELS& FEEDRATES TURRET ACCURACY MISCELLANEOUS 3-phase 60 Hz 3-phase 60 Hz WITH BIG BORE OPTION- CAPACITIES WITH BIG BORE OPTION- SPINDLE Standard Standard WITH TAILSTOCK OPTION THE MACHINE HAS NEW THRUST BEARINGS ON X AN D Z AXIS. NEW MOTHER BOARD AND A NEW HYDRAULIC VAL VE. IT WAS SERVICED BY HAAS/SELWAY MACHINE TOOL IN NORTHERN CA. SPECS SUBJECT TO VERIFICATION. THE MACHINE IS IN GREAT RUNNING ORDER. THIS IS A VERY SMOOTH MACHINE AND RUNS EXCELLENT. BE SURE TO SEE THE VIDEO ON TOP. YOU'RE WELCOME TO COME IN FOR INSPECTION. PLEASE CALL OR EMAIL IF YOU HAVE ANY QUESTIONS. THIS BELONGED TO ONE OF OUR CUSTOMERS WHO WAS DOWNSIZING HIS SHOP. 5 FADAL MILLS ARE ALSO AVAILABLE FROM THE SAME SELLER. THERE IS NO CHIP CONVEYOR OR AUGER WITH THE LATHE REGARDS ARPI MACHINE S
2000 Hitachi-Seiki TF-25 CNC Lathe Seicos Control, Excellent Condition! Runs and Looks Beautifull. Questions Contact Steve@ 866-803-5202, Shipping Quotes Contact Shipping Dimensions 25 L with chip conveyor and coolant tank x 8' D x 6' H 10000lbs, VIDEO Hitachi Seiki Presents the TF25 Turning Center The Hitachi Seiki TF25 NC turning center is the latest addition to the loader-integrated TF series which has been developed for customers who require higher cutting performance. Larger capacity, and increased power in a compact design. It was designed to deliver fast, powerful, highly accurate machining without sacrificing ease of operation. The machine is controlled by the Seicos Lambda 10L. Which combines multiple programming features with a user-friendly personal computer interface. According to Hitachi Seiki, the TF25 offers large-machine ... morefeatures in a compact package, making it the most powerful model in the TF series to date. The TF25 includes several standard features to enhance speed and accuracy. A Q-Setter and one-touch tailstock simplify setup. Square cast iron sliding guideways provide stability for heavy-duty cutting. A built-in spindle motor minimizes vibration for increased precision and a smoother finished piece. The thermosymmetric spindle motor and head design and pre-tensioned. Double-anchor, X- and Z-axis ball screws greatly reduce thermal distortion. Machine travels measure 10.6" along the X-axis and 24.8" along the Z axis. With spindle speeds up to 4000 rpm. The TF25 has a rapid traverse rate of 1181 ipm, and a maximum bar capacity of 2.5" The turret features 10 tooling stations, each capable of accepting ID or OD tools. The TF25 can be used alone. Or connected by the MR20F high-speed overhead robot with other TF25's and additional machine tools to form a versatile machining cell, adds Mark Leeser, Vice President-General Manager of Hitachi Seiki. The MR20F functions as an integrated loader, thus saving floor space while enabling both machining and workpiece transfer for
Click Photo(s) to Enlarge Stock Model Age 2501, Fast Trace 1995, Specification Description Control, Fanuc 20-T CNC Control, Chuck Size, 8" 3-Jaw, Max Swing, 17.5" Max Swing Over Cross Slide, 11.75" Max Between Centers, 40" Max Cutting Length, 40" Max Spindle Speed, 18 Speeds 37.5- 3.000 RPM, Spindle Nose, D1-6 Camlock, Spindle Bore, 2" Hole Thru Spindle, Spindle Drive, Equipped with: Fanuc 20-T CNC Control with Teach Programming Features. 8" 3 Jaw Chuck, Aloris Tool Post, Tailstock, Steady Rest, Coolant/ Chip Pan, 37-3000Max RPM, RS 232 Port, Manuals/Schematics. YouTube Link: http:www.youtube.com/watch?feature=player_embedded&v=VIoekAl3BCc FOB Truck. Payment Methods Accepted: Wire Transfer. Cashiers Check, Or Money Order. Or Call us at 763-745-1166 Machinesused.com
4" chuck Hardinge Quest GT27SP Gang Style CNC Turning Center(2003) Specifications Bar Size: 1.062" 27mm) Chuck Size: 4" 100mm) Spindle Speed: 8.000 RPM, X-Axis Travel: 11.96" 304mm) Z-Axis Travel: 11.062" 281mm) C Axis: 360.000, Tool Shank: 0.500" Square/Rotary) Tool Shank: 0.750" Round) Main Motor Drive: 5 HP, Equipped With: Fanuc 21iT CNC Control. C Axis Contour Milling, 16C Collet Chuck, 000010"00010mm Resolution Control, Custom Macro B, Rigid Tapping. Run Time Parts Counter, Headwall Coolant, SP Certification, Laser Ball Bar Tested Dynamic Balanced Spindle and Drive Motor, Harcrete Polymer Composite Base, Full Machine Documentation, Part Chute, 1) Extra Top Plate with Holders, M Function Air Blasts@ Bulkhead and Cross slide, Machine being sold As Is. Where Is. Buyer is responsible for shipping and ... moreloading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
WARNER& SWASEY SC-32 Machine is in great mechanical condition Ready for new CNC control on our floor in Cleveland We do offer retrofit services THIS AUCTION IS FOR A SC-32 TURNING CENTER IN GREAT MECHANICAL CONDITION WITH NO OPERABLE CNC CONTROL. MACHINE IS 100% MECHANICALLY COMPLETE; 75 HP SPINDLE MOTOR AND DRIVE. 32" CUSHMAN/W&S 3 JAW POWER WRENCH CHUCK. ADJUSTABLE POWER WRENCH. ALL TURRET TOOLING AND EXTRA TOOLING. CHIP CONVEYOR. COOLANT PAN AND PUMP. Call 216 470 0270 for more information Machine weighs 38.000 lbs FREE loading on YOUR truck Ships worldwide(any prep is at buyers expense) PLEASE CONTACT SELLER PRIOR TO PAYMENT!
63" Nomura Model NN160D CNC Swiss Type Lathe(1995) Specifications and Equipment Max. Bar Capacity: 0.63" Max. Machining Length: 5.9" Main Spindle Speeds: 300- 8000 RPM, Main Spindle Indexing: 15 Degrees, Number of Tools: Turning Tools(4/4) Number of Tools: Front End- Working Tools 3, Rapid Traverse Rates: X.Y/Z) 394/630 IPM, Milling Speed: 300- 6000 RPM, Max Front Drlling/Tapping Dia. 8 mm/ 7 mm, Equipped With: Mitsubishi 310NC CNC Control with 9" Monochrome CRT. C-Axis Milling, Auto Parts Catcher, Condition Light, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Mori Seiki Model ZL15S 4 Axis CNC Lathe with Subspindle Specifications(Preliminary) Swing Over Bed: 18.9, Distance Between Centers: 23.4" Collet Capacity(Main Spindle) 1.61" Chuck Size(Sub Spindle) 6" Spindle Nose(Main Spindle) A2-5, Hole Through Spindle: 2" Spindle Speeds(Main Spindle: 5.000 RPM, Spindle Speeds(Sub Spindle) 5.000 RPM, Tool Capacity(Upper Turret) 12, Tool Capacity(Lower Turret) 8, Equipped with: Fanuc 0TT CNC Control. 10 HP Main Motor, 7.5 HP Sub Spindle Drive Motor, Parts Catcher, 8" Chuck on Main Spindle, 4" Chuck on Subspindle, Machine being sold As Is. Loaded on truck Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com Video available at http:www.youtube.com/watch?v=uRhflq-T-uM&feature=youtu.be
I own this cnc lathe. I recently order a new(bigger)one so this one is for sale. The cnc is in perfect condition. I have never run it over the capacity. Very fast accurate machine. Yasnac LX3 controler 10 stations turret 8" hydraulic chuck Small foot print abount 12' X 8' Buyer take charge of shipping. Watch video
WASINO CNC TURRET LAT HE MODEL: SL-104D S/N: 672 MAX DIAMETER: 17" BETWEEN CENTERS: 12" THROU GH HOLE: 1.75" TWO TURRETS SIX POSITIONS EACH MAX RPM: 6000 FANUC 0-TT CONTROL BAR FEEDER NO TOOLING Y EAR: 1990 Please call(256) 536-7871 from 7:30am to 4:00pm Central Mon-Friday. We do not arrange shipping but will load anything we sell onto your truck or trailer. We do offer a 30 day return policy and are members of MDNA. We do reserve the right to cancel the auction at any time in the event of local sale. Payment is required within 5 business days from end of auction. Buyer is responsible for all shipping costs and arrangements. We will load on a flatbed trailer unless otherwise noted. Please contact us with further shipping and payment questions. Normal 0 false false false EN-US X-NONE X-NONE
Be sure to add me to your! Quality new and used industrial parts at an affordable price! start_elivehelp_btncode end_elivehelp_btncode Cincinnati Milacron Avenger 200S CNC Turning Center 850SX Acramatic Control Move mouse over images to see enlarged version Click to open supersize image This is a Used Cincinnati Milacron Avenger 200S CNC Turning Center with 850SX Acramatic Control. Lexair Inc. Rhinobar Stock Feeder System, Jorgenson Chip Conveyor, Parts Catcher, Sub-Spindle, Oil Skimmer and Coolant System. I have listed all the included equipment below. We have powered this unit and the system booted up without a problem. The fluids have all been drained for shipping so the system flashed an alarm for low fluid level. The CRT Screen is not operational and we have replaced it with a new flat screen monitor. We will load this on your truck ... moreat no charge. We have a great feedback score so buy with confidence! Lexair Inc. Rhinobar Bar Feeder Model# RB12-2.75. 1/4" to 2 3/4" Bar Stock(handles Hex, Round, Square, and some Asymmetric Stock) Siemens Servo Control 12 Tool Turret Tool Setter Metric Tooling A-2 Spindle Nose A2-5 Spindle Nose on Sub-Spindle 24-5000 RPM on Sub-Spindle Left and Right Hand Tool Capability Parts Catcher Jorgenson Chip Conveyor Gusher Coolant Pumps Machine Weight 12.000 lbs. Manuals and Wiring Diagrams Included We carry a wide variety of Industrial Automation. Process Controls, Material Handling Equipment, Machining Equipment, Electrical, Power Transmission, Hydraulics, Pneumatics, PLC, HMI, etc. You will reconize many of the brands such as Allen Bradley, Omron, Banner Engineering, Sick, STI, Siemens, Mitsubishi, Emerson, Turck, Effector, Fanuc, Motoman, KUKA, Square D, Cutler Hammer, Keyence, Festo, SMC, Vickers, Parker, and many more! Be sure to check our our store! We list new items everyday. INDUSTRIAL PARTS R US INC. will guarantee all items for 30 days from the date of delivery(see our terms and conditions) We have a great feedback rating and a history of excellent customer ser
Nakamura-Tome Model TMC-12 2-Axis CNC Lathe(1995) Specifications Maximum Swing: 11.8" Maximum Machining Length: 7.87" Turning Diameter: 9.06" Spindle Bore: 1.8" Bar Capacity: 1.6" Spindle Nose: A2-5, Center Distance: 7.8" Rapid Traverse Rates: X/ Z) 470/ 945 IPM, Spindle Speed: 4500 RPM, Equipped with: Fanuc 21T Control. 6" 3 Jaw Hydraulic Chuck, Bar Feed, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
We are pleased to quote the following machine for your consideration: Click for Photos Click for Movie Click for PDF Please Refer To Machine# 945003 Famar CNC Lathe Pronto 6 L2155 Lathes- Combination N/C& CNC 3 Axis Or More Chuck Size 12.5" Manufacturer Famar. Model No. Pronto 6. Tooling VDI. Year Mfg. 2007. Control Fanuc 21-ITB. Axis 4 Axis with Y Axis. Max Length 9.5" Max Part Diameter 10" X Axis Travel 13.8" Rapid 3.540 IPM. Automation Easily Integrated in Automation Cell. Spindle Speeds 6.000 RPM. Conveyor Chip Conveyor and Load and Unload Conveyor. Turret Configuration 12 Position. Features/Accessories 20 Pallets for Full Automation. Motor HP 40 HP. Spindle Nose/Taper ISO6. Condition Excellent. Comments Brand New. Never Used. FOB Point Midwest. Price
Title: Okuma LR-15 4 Axis CNC Turning/ Milling Center. Okuma OSP-5020L Control, 1993 Description: DONT MISS THIS RARE OPPORTUNITY! PRE-REMOVAL PRICE ONLY. FIRST PERSON TO USE BUY IT NOW IS PROUD OWNER OF A FANTASTIC DEAL ON THIS FINE MACHINE. WITH SOME TOOLING AS WELL. Our Internal Stock# 4-19-13 dale) You are about to purchase the following item: 1- Okuma LR-15 4 Axis CNC Turning/ Milling Center. Okuma OSP-5020L Control, 1993 Model# LR-15 S/N 2098 New 1993 Okuma OSP-5020L CNC Control 4-Axis 75- 4200 RPM. 20.47” Max. Swing Over Bed 14.57” Max. Swing Over Slide 3.54” Spindle Bore 30/40 HP 8” 3-Jaw Chuck Chip Conveyor 10 Pos. Upper Turret 8 Position Lower Turret Misc. Turret Tooling Machine is located in Washington. PA. There will be a loading/ rigging charge of $ 1.000.00 to get machine loaded onto truck of your choice. This unit was taken ... moreDirectly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) We can get you a great shipping rate on this Motor to a Business location with a Loading Dock/ Lift Truck. We use UPS LTL ground freight. With our Volume we get great discounts and we pass these savings on to our customers. If you would like to get the exact rate to your destination feel free to contact us at any time. Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Num
CNC Machine Tool Services 1666 Oakbrook Drive. Gainesville, GA. 30507 706-783-5091 fax 770-401-3572 cell Email- sales@cncmts.com For a link to our website. Please click on this icon OKUMA L-1420 TWO AXIS CNC LATHE SPINDLE NOSE: ASA A2-8 SPINDLE BORE: 3.15" BAR CAPACITY: 2-5/8" MAXIMUM SPINDLE SPEED: 2800 RPM NUMBER OF SPINDLE SPEEDS: INFINITELY VARIABLE CHUCK SIZE 15" KITAGAWA) MACHINE TRAVELS CROSS SLIDE(X-AXIS) 9.05" LONGITUDINAL(Z-AXIS) 26.38" CUTTING FEED RATE: 0.0001– 40 IPR RAPID TRANSVERSE X: 472 IPM RAPID TRANSVERSE Z: 591 IPM TURRET TYPE: AUTO/V12 NUMBER OF TOOLS: 12 TOOL CLAMPING: BOLT CLAMP BED LENGTH OF SLIDEWAY: 59.94" WIDTH OF SLIDEWAY: 18.11" MOTORS MAIN SPINDLE: 30 HP X-AXIS SERVO MOTOR: 2.7 HP Z-AXIS SERVO MOTOR: 5" HYDRAULIC POWER PUMP MOTOR: 2 HP COOLANT PUMP MOTOR: 34 HP COOLANT ... moreCAPACITY: 60 GALLONS HYDRAULIC TAILSTOCK DIAMETER OF QUILL: 3.94" TAPER OF CENTER: MT#5 QUILL STROKE: 4.72" WEIGHT BETWEEN CENTERS 1375 LBS. HYDRAULIC POWER UNIT TANK CAPACITY: 14 GALLONS PRESSURE RANGE ADJUSTMENT: 450 PSI FLOW: 6.6 GPM FLOOR SPACE. APPROX. 128.7" X 68.7" WEIGHT. APPROX. 13,600 LBS ELECTRICS: 220V. 3 PH, 60 CYCLE I ALSO HAVE A 12' KITIGAWA CHUCK AND A COLLET CHUCK THAT CAN BE INCLUDED WITH THIS MACHINE- DEPENDING ON FINAL SALES PRICE. THESE ITEMS ARE NOT INCLUDED IN THE PRICE. BUT CAN BE NEGOTIATED. Please go to our website for our terms and conditions. This machine is under power and ready for inspection. Very good condition. Quiet Spindle. Turret, Axis, etc. Very Strong, heavy duty machine. Its ready to start producing now. We have all the manuals& Toolholders. 2) Riten Live Centers are included. Rear Discharge Chip Conveyor. We also can arrange the transportation to your facility using one of our trusted truck lines. Considering we ship machines all over North America. We get great rates on shipping costs. Sold with a 30 day return privilege. Please refer to our website for all the terms and conditions of sale. CNCMTS will also prov
1987 OKUMA LB15 2 AXIS CNC TURNING CENTER S/N 6101.3290. 6 MONTH OLD LCD CRT EXCEPTIONALLY CLEAN MINT CONDITION. BRAND NEW SPINDLE BEARINGS INSTALLED 4/15/2013! SPECIFICATIONS: SWING OVER SADDLE 15.75" MAXIMUM TURNING DIAMETER 9.84" MAXIMUM TURNING LENGTH 19.69" X AXIS TRAVEL 6.89" Z AXIS TRAVEL 20.47" RAPID TRAVERSE RATE X AXIS 472 IPM RAPID TRAVERSE RATE Z AXIS 472 IPM SPINDLE NOSE A2-6 SPINDLE BORE 2.2" MAXIMUM BAR CAPACITY 1.8" SPINDLE SPEEDS 75- 4.200 RPM SPINDLE MOTOR 15 HP TURRET CAPACITY 12 STATION TURRET TAILSTOCK QUILL TAPER MT#5 TAILSTOCK QUILL DIAMETER 3.54" TAILSTOCK QUILL STROKE 4.72" APPROXIMATE DIMENSIONS 139" x 73" x 69" MACHINE WEIGHT(APPROXIMATE) 11.000 LBS EQUIPPED WITH: OSP-5000L-G CNC CONTROL WITH IGF 8" 3-JAW KITIGAWA CHUCK 12 POSITION TURRET PROGRAMMABLE ... moreTAILSTOCK CHIP CONVEYOR MANUALS
Specifications Notes Machine basic datas CNC multi-spindle turning center for bar work Manufacturer Gital Year of manufacturing 2000 within tolerance and working Control Name Sinumerik 840C Manufacturer Siemens Kind/Type CNC control Detail description Technical details Drum Number of spindles 3 Spindle bore max. 65 mm Distance between centers of spindles 369.5 mm Power of the spindles at 100% duty cycle 9 kW Power of the spindles at 40% duty cycle 13.5 kW Spindle speed-3000 rpm Miscellaneous Colour Floor space/Weight Dimensions(L x W x H) 9.25 x 1,94 x 2,53 m Weight approx. 20000 Kg Equipment Chip conveyor Counter spindle Clamping chuck diameter max. 175 mm Torque(100%ED)114 Nm Torque(40%ED) 172 Nm Spindle speed: 3000 U/min Longitudinal stroke: 920 mm Rapid traverse Z-Axis: 20 m/min Compound slide Transverse travel X1 und X2: 155 mm Transverse ... moretravel X3: 180 mm Transverse travel Z1 und Z2: 565 mm Transverse travel Z3: 580 mm Rapid traverse X-Axis Slide 1. 2, 3: 15 m/min Rapid traverse Z-Axis Slide 1. 2, 3: 20 m/min 5. Make R"ohm, incl. connecting elements Front slide Quantity: 2 Radial stroke X: 110 mm Longitudinal stroke Z: 565 mm Rapid traverse X: 15 m/min Rapid traverse Z: 20 m/min Turret mounted on compound slide Number of tool stations: 12 Shank diametre according to DIN 69880: 30 mm Tool holder mounted on front slide Number of tool stations: 2 Shank diametre according to DIN 69880: 30 mm Tool carrier w. index. turret f. slide pos. 1 Tool carrier with hydraulic indexing turret for front slide position 1 with 2 toolholders VDI 30 instead of tool carrier Tool carrier w. index. turret f. slide pos. 2 Addt'l cost for frontal slide with 2 pos. revolver with VDI 30 holder in pos.2 Drive for rotating tools. Turret 1 Drive for revolver pos.1 drive capacity 4 KW by power rate 5000 rpm max. speed: 6000 rpm max driven tools: 12 Drive for rotating tools. Turret 2 Drive for revolver pos.2 drive capacity 4 KW by power rate 5000 rpm max. speed: 6000 rpm max driven tools: 12 Drive for rotating tools. Turret 3 Drive
Gildemeister Model CTX 400 Twin Spindle Live Tool Y Axis CNC Lathe(2002) Specifications and Equipment Max Swing: 22" 570 mm, Turning length: 25" 635 mm, Swing Over Cover: 16.54" 420 mm, Spindle bore: 3.11" 79 mm, Y-Axis Travel: 3" +- 79 mm, Z-Axis Travel: 25" 635 mm, X-axis travel: 8.6" 220 mm, Equipped With: Heidenhain Turn Plus CNC Control. Y Axis, Full C Axin on Both Spindles, Tool Presetter, Parts Catcher, Large Quantity of Live Tooling, Static Tooling, Collets and Holders, Chucks, Chip Conveyor, 2) Collet Chucks, Sub Spindle, LNS Quick Load Servo Barfeed, Full Set of Manuals, Video Available,
HTML Online Editor Sample 7918 E McClain Drive Suite 101 Scottsdale AZ 85260 Tel: 480-212-0775 Fax: 480-922-1675 One(1) 1998 Haas HL-4 LATHES. CNC Control: Haas General Specifications: Chuck: 10" Bar Capacity: 2.5" Standard Bar Capacity: Turning Diameter: 14.5" Between Centers: 39" Spindle: Maximum Speed: 3.400 RPM, Peak Horsepower: 30 HP, Turret: Number of Tools: 12, Miscellaneous: Weight: 14.000 lbs, Power Requirement: 480V, Options: Haas Control, Tailstock, Chip Auger, Tool Presetter, Quick Code, Rigid Tapping, Remote Jog Handle, Gear Box, Macros, Floppy, Approximate Spindle Hours: 4.023, Can be inspected under power in NH warehouse location. Video here: We can provide shipping quotes upon your request. Contact Tom at 480-212-0775 with any questions. Etc.
Star RNC 16 Specification Description Control, Fanuc OT, Spindle HP, 3 Hp, RPM, 300 to 8.000, Bar Cap, 16mm- 5/8" Machine Size, 72" 84" 48" Machine Weight, 2.500 lbs, Equipped With: FMB Mini turbo magazine barfeed- This is one of 5 machines for sale. All are at the same price. Have Fanuc OT Controls, Model-RNC-16, and come with FMB Bar Feeds. Machines range from 1988- 1993 in year. NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. Need help with Questions on shipping or assistance with this machines specifications? ... moreFeel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
WARNER& SWASEY CNC TURNING CENTER MODEL NO. SC-20 M4570 S/N 2859035 SPECIFICATIONS: 28" SWING OVER BED 21" SWING OVER TURRET SLIDE 52" CENTERS 6-1/4" HOLE THROUGH SPINDLE SPEEDS 12 TO 851 RPM 40 HP MOTOR 8 TOOL POSITION VERTICAL TURRET TAILSTOCK 18" 2-JAW CHUCK CHIP CONVEYOR UPGRADED- RETROFITTED WARNER AND SWASEY CNC CONTROL Contact Justin at 503.464.6013 with any questions. Located in Lombard. IL. Buyer responsible for any required skidding or crating charges. WORLDWIDE FREIGHT SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT BID IF YOU CANNOT PAY ... moreFOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from the facility closure. This means the
Hello I am selling my Labvolt 5300(sherline) CNC lathe. It has been converted to Mach 3! Details: 1. Very accurate and rigid design. 2. Spindle has is hole through and programmable up to 2800 rpm with spindle tach feedback! That means you make threads on this machine! 3. Takes any kind of G and M Code. 4. Mach 3 Included. You do not need any additional software or hardware to make parts with this machine. Simply use the wizards in the program to make anything u want! 5. Comes with the computer. Monitor, keyboard, mouse, and machine. You just plug it in, and make parts! Model 5300-B– CNC Lathe(Light Duty) 120 V– 60 Hz 220 V– 50 Hz 240 V– 50 Hz. Power Requirement Current 3 A 1.5 A 1.5 A. Lathe Swing Over Bed 90 mm(3.5 in) Center Height 101.6 mm(4 in) Distance Between Centers 200 mm(8 in) Swing Over Cross Slide 48 mm(1.9 in) X-Axis Travel 47.8 ... moremm(1.88in) Z-Axis Travel 105.4 mm(4.15in) Resolution ±0.00318 mm(±0.000125 in) Headstock Spindle Bore 10 mm(0.405 in) Spindle Taper Morse No. 1. Tailstock Taper Morse No. 0. Sleeve Stroke 38.1 mm(1.5 in) Main Spindle Drive Programmable Speed Range 0-2800 r/min. Motor 160 W(0.21 hp) Overload protected. Feed Motors Type Stepper. Resolution 400 steps/r. Rapid Traverse Speed 356 mm/min(14 in/min) I Will be uploading a video of the machine in action soon! So keep posted! Shipping is the buyers responsibility. I will put this machine on a pallet and shrink it for you, but shipping is your responsibility. This machine weighs 170 lbs with computer and monitor. 20% of the purchase price is due within 12 hours. And the full price must be paid for within 72 hours. Here is my number if you have any questions! 303-587-859two Thank you, Good luck! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e4302f2dc-0xfc-
Please see info below and photos on a very nice Tsugami NP-32 Swiss Type CNC Lathe with Live Tooling. Sub-spindle, Iemca Boss 542 Barfeeder and Large Tooling Package. This machine can be seen under power in Cincinnati, OH and is in great running condition! I do have the ability to load this machine on your truck. I can shop and get you a freight rate if you want me to. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. TSUGAMI NP-32 AUTOMATIC PRECISION SWISS TYPE CNC LATHE w/Milling/ Drilling/ Subspindle Model NP32. New 1995, S/N 9566 EQUIPPED WITH: Fanuc 0T CNC Control w/ CRT. Iemca CNC Boss 542 Barfeeder, RS 232 Port, Linear/Circular Interpolation, Thread Cutting, Dwell, Automatic Coordinate System Setting, Single Canned Cycles, X-Axis Diameterical and Radius Designations, Circular ... moreArc Radius Designation, Constant Surface Speed Control, Background Editing, Twin Turrets, Subspindle, Live Tooling, Tooling Package, Chip Conveyor, Coolant System. CATALOGUE SPECIFICATIONS: Minimum Bar Stock Diameter. 314" Maximum Bar Stock Diameter. 1.26" Maximum Drilling Diameter. 787" Cross Travel Front Turret(X1-Axis) 3.46" Cross Travel Rear Turret(X2-Axis) 4.52" Headstock Travel(Z1-Axis) 8.46" Subspindle Travel(Z2-Axis) 8.46" Minimum Indexable Degree(C-Axis) 5 Degrees. Spindle Center Height. 35.43" Number of Turrets. 2. Number of Tool Mounting Stations. 16. Number of Rotating Tool Mounting Stations. 16. Rotary Tool Spindle Speed. 270- 5400 RPM. Rapid Traverse X1. X2, Z1, Z2 Axes. 315 IPM. Subspindle Maximum Chucking Diameter. 1.26" Subspindle Speeds.
Hitachi Seiki HT-15 CNC lathe Machine runs great. We don't have any work for it. Need to make room for larger lathe. 6" hyd. chuck Tool presetter Chucker no tailstock 1.25" spindle hole 5000 RPM max spindle speed(with chuck) YuYu software Backup copy of PLC ladder Disconnected April 23. 2013 Video: Buyer pays all freight charges Selling"AS IS"
We are selling one(1) Leadwell MCH-500 CNC Horizontal Machining Center. This machine is being sold"As Is" and is not currently running. Also. It is not currently hooked up to A/C. It is the first of two of this model that we are selling(1 of 2) This auction is for one machine only. This machine was purchased from Milwaukee Area Technical College[MATC] there are lables and barcodes on the machine to prove this. And came to us running at that time. We did NOT have a need for running this machine. They have been in storage since that time, and that is why they are listed"As Is" We always offer an open invitation to anyone interested in purchasing equipment from us. To come inspect any machine in person at our facilities. Please email us with questions or to set a time to see our machines that we are selling.
HARDINGE CONQUEST 42 CNCTURNING CENTER MAXIMUM SWING OVER UPPERWAY COVER- 19.5" MAXIMUM SWING OVER LOWERWAY COVER- 14.5" MAXIMUM DIST. SPINDLEFACE TO TURRET FACE- 14.0" MAXIMUM DIST. SPINDLE TOTAILSTOCK- 17.5" MAXIMUM X-AXIS TRAVERSERATE- 472 IPM' MAXIMUM Z-AXIS TRAVERSERATE- 630 IPM TURRET INDEXING TIME.STATION TO STATION- 5 SECONDS HOLE THROUGH SPINDLE-1.875" SPINDLE SPEED- 50 TO5000 RPM SPINDLE MOTOR- 10HP EQUIPPED WITH FANUC OT CONTROL PARTS CATCHER TAILSTOCK COOLANT SYSTEM TURBO CHIP CONVEYOR TOOL BLOCKS LIVE TOOLING TOOLHOLDERS MACHINE IN GOOD WORKING ORDER EXCEPT FOR DRAW TUBE IS STUCK IN SPINDLE. IF YOU HAVE THE TIME TO REPAIR YOU WILL HAVE AN EXCELLENT MACHINE. PLEASE CALL ALEX@864-879-4719 FOR MORE PICTURES AND INFORMATION ABOUT THIS MACHINE. THANKYOU FOR LOOKING.
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Motherboard A16B-100-0010/08F Circuit Board This part came from a Miyano BNC-34 CNC Lathe Serial No. BN31374C I bought the CNC lathe from a bankruptcy auction. And I don't know if the machine was working at the time it was sold. Therefore, I do not know if this part is in working condition nor do I have the ability to test it. If you receive this part and it does not work, you are welcome to return it for a full refund, MINUS SHIPPING. You would be responsible for ALL shipping costs. I have many parts for sale from this same machine and am very interested in combined and bulk purchases for multiple items. I can ship freight on a pallet. This is preferable to me and would be an easier and safer way to ship the items. No foreign bidders. No exceptions. NO CANADIANS. The goods ... moreare sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
ID# 88783 Machine Specifications: Swing Over Cross Slide. 7.88" Bar Capacity. 1.576" Spindle Nose. A2-4. Spindle Speed. 6.000 RPM. Spindle Motor. 12 HP. X-Axis Travel. 6.1" Z-Axis Travel. 7.1" Turret Positions. 8. Equipped With: Fanuc OTC Control. ALPS PF-V1S Magazine Bar Loader. 1-Cross Drilling Live Tool. Chip Conveyor. Sub Spindle. Collet Adapter. Long Part Tray Collector. Machine Dimensions(Approx) 69"L) x 57" W) x 69" H) Machine Weight(Approx) 4.620 lbs Machine Location: Johnsburg. IL USA Additional Information: Photos shown are of machine while still at plant. Machine can be seen under power in Johnsburg. IL, Video links: Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and ... morewith all faults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Jason Sanda or at 847-497-9800 for any questions and for payment detail.
This Auction is for a 1981 CNC 48" Giddings& Lewis Vertical turret Lathe with an M800 Control the Machine is in good working order and can be inspected under power untill the end of June. we are currently using this machine in production easly holding tight tollerances of +/ 0005 and tighter. the auction includes some tool holders. Chuck and jaws. and manuals Specs. Max Swing 60" chuck dia 48" chuck type 4 jaw chuck rpm( inf veriable) 0-320 rpm Max hight under tool 56" max hight under rail 60" feed rate 0-100 ipm jog rate 0-40 ipm rapid traverse 240 ipm main drive motor 40 hp control axis 2 simultaneous axes drives 4 hp each servo rail motor 3 hp machine waight 60,000 lb approx floor space 11' x 12' 12' configured with power 5 position turret the buyer is responsable for shipping and rigging we will ... moreasist with rigging at our descretion feel free to ask guestions available for inspection with apointment We are not a dealer we have had this machine in our facility sence 1990 and would be glad to answare questions `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e6c03718e-0xfe-
Miyano BNC 34C3, Runs Very Good! Questions Call Steve@ 866-803-5202. Shipping Quote Contact Control: Fanuc 21T. Bar Capacity 1.312" Chuck Work 3" dia. Max Work Length Bar Work 5.9" Chuck Work 3.15" Spindle Speeds 200-6000rpm, Turreet 8station,
Please see the info below and photos for an really nice CNC Enhancements Autobar 400 Barfeeder. It has a capacity up to 4" Diameter and 60" Maximum Length. Please see Description Below. Please advise if you would like any additional information. I can shop a freight rate for you if you would like me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. Please feel free to call or email anytime. CNC ENHANCEMENTS AUTOBAR 400 BARFEEDER Model AB-400. S/N 592, New 2002 MACHINE DESCRIPTION: The Autobar 400 Loads Spindle Length Bars(up to 60 Inches Long) from a Tray into a Lathe. It Measures the Bars as it Loads them. And Positions the Bar in the Lathe so the Bar is Ready for an Initial Cut Off or Facing to Square the Front of the Bar. Each Time the Chuck or Collet Closes and ... moreThen Opens Again the Autobar 400 will Feed Out(with or without a Turret Stop) Enough of the Bar to Make a Part. While Doing This, the Autobar 400 Screen will List the Number of Parts and the Length of the Bar that Remains. It can also Provide a Count of Total Parts Made and a Pre-Programmed Total Parts Wanted. When There is not Enough Material to Make Another Part. The Autobar 400 will Pick up a New Bar Off the Tray and Prepare to Load it the Next Time the Chuck or Collet Opens. The Lathe will be Stopped While this New Bar is Being Loaded, and Restarted(without the Operator's Assistance) When the Bar is in Position. Loading the New Bar will Push the Remnant from the Last Bar Out into the Chips. The Autobar 400 will Continue this Cycle until it Runs out of the Material on the Tray, Reaches Total Parts Programmed, or is Turned Off. The Autobar 400 is Equipped with a Keypad with a Main Menu with Four Options. The First Two Options are"Run Job" These are Used When You are Ready to Enter the Data and Run a Particular Job. The Third is"Setup" This Tells the Loader Where the Front of the Chuck or Collet is. Every Time you Change the Spindle Nose. You Must Use
Auction Wizard 2000 Listing Template- AW2KLOT#10927 Emcotronic TM02 Controller for EMCO Maier EMCOTURN 242 CNC Lathe Slant Bed Lathe 60 Day Warranty This Emcotronic controller has not been tested but is believed to be in good working condition. Unless otherwise stated. This item comes only with what is pictured. Contact us through eBay, or call 304-489-2226 with questions. If there is anything that would prevent your leaving 5-star feedback, please call or e-mail within 60 calendar days after receipt of your item. WE WILL MAKE IT RIGHT! PROMPT& PROFESSIONALLY PACKAGED WORLD WIDE SHIPPING This item will be shipped via UPS Ground(upgrades available for additional cost) to Continental US& Canada only. OTHER COUNTRIES: We are not able ship this item outside the Continental US or Canada. International buyers are additionally responsible ... morefor customs and related charges payable to the appropriate authorities. 99% of our items are packaged in our warehouse using the Instapak foam packaging system in new. Strong boxes. Packaged shipping weight is approximately 29 lbs from zip 26150. ||10927|alp|alp|$500.00|130430_|fpaaI7|05/07/13
Prototrak 1840 Lathe If you arre looking for a prototrak lathe in absolutely great shape here is the one you are looking for. The Toolpost does not come with it however you will get a collet drawbar a steady rest and a nice chuck. Thank you for your Business God Bless! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e856dd517-0xfd-
Now available for your inspection and purchase at our Warehouse in Beautiful Downtown Miamisburg. Ohio is this Beautiful Nardini Fast Trace. CNC Engine Lathe, S/N D5JFM173, Manufactured New in 1996 w/ Teach-In Feature. We just purchased it yesterday from one the cleanest Tool and Die shops we have ever seen. Specifications are as follows: CNC Controller: Fanuc 20T Capacity: Distance Bewteen Centers 40" Dustance Between Chuck& Tailstock 33" Max Turning Length w/ Quick Change Turret 31" Swing Over Bed 17" Swing Over Wings of Saddle 15 3/4" Cross Slide Travel 11 3/4" Tool Section 3/4" x 3/4" Bed: Width 10 1/2" Height 12 1/2" Headstock: Spindle Nose D-1 Camlock Spindle Bore 2" Spindle Speed Range 37. 5- 3.000 RPM Tail Stock: Quill Diameter 2 3/8" Quill Travel 8 1/2" Tailstock ... more8" Manual Chuck Coolant System Dimensions: 89 1/2" x 54 1/2" x 72" Weight: 4.410 Lbs If you buy this machine we know you'll be very happy with it. The photos were taken as we bought it. We didn't even have to wipe it off. That's the way this Tool and Doe shop keeps their Machine Tools. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be. Send it back to us and we’ll refund what you paid us. Every item we sell. Unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse(515 Kercher St. Miamisburg, OH 45342) We request that the successful buyer con
Cincinnati Model Cinturn 1212U Live Tool CNC Lathe(1993) Specifications Maximum Swing: 21.7" Maximum Turning Length: 40" Spindle Speeds: 3500 RPM, Spindle Bore: 3.15" Main Motor: 40 HP, Turret Capacity: 12 position, Equipped With: Acramatic 850 SX TC Control. Live Tooling, Cinturn 3 Update with Threading Package, Hydraulic Steady Rest, Chip Conveyor, All Available Live Tooling, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
1/2" bar cap Tornos DECO 13a CNC Swiss Type Lathe(2009) Specifications and Equipment Max. Bar Capacity: 1/2" Length of parts- rev guide bush: 180 mm, RPM of programmable spindle: 100- 10.000 rpm, Positioned stop& indexing: 0.1 degree, Max. spindle power: 2.2(3.7) kW, Guide bush holder(X1/Y1) X2/Y2) Specifications Below, No. of tools in the guide bush: 2 x 5 position, Tool section: 12 x 12 mm(12.7 x 12.7) No. of drills/cross mills: 6(2 x 3) Programmable rpm: 100- 8.000 rpm, Max. turning spindle power: 0.55(1.1) kW, End unit(X3/Y3) Specifications Below, Max. no. of fixed end tools: 4, Max. number of turning end tools: 3, Programmable rpm: 100- 8.000 rpm. Max. power of turning spindles: 0.55(1.1) kW, Z4/Y4) and(X4) +C4 as option) Specifications Below, Max. diameter clamping capacity: 13(16) mm, Standard part length: 180 mm, Programmable ... morerpm: 100- 12.000 rpm, Positioned stop and indexing: increment 0.1 degree, Max. power of counter-spindle: 1.5(2.2) kW, Max. number of counter-operations: 6, No. of fixed and turning spindles: 6, Equipped With: LNS Alpha ST320 Magazine Bar Loader. W/ 17, 14& 11 mm Channels) 3) Mini Tool Breakage Detector, Donaldson/Torit Mist Collector, Adaptation for TF20 Collets(16mm) on Main and Sub Spindles, Positioned Spindle Stop(S1) Motorized S2, S3, S4, S5, S6, 16mm Rotary Type Guide Bushing, Approximate tooling, 4) 226-1001 Long Turning Holder, 7) 226-1600 Mill/ Drill Spindles, ER20, 1) 226-1630 Mill/Drill Spindle(max Mill cutter 40mm) ER20, 7) 226-1650 Extension Arbor Shaft E20 for Collet ER16, 2) 226-3100 Mill Arbor Shaft E20 for Circular Milling Cutter Bore 13mm, 4) 226-3100 End Unit Tool Holder, 25mm Bore hole, 3) 226-3202 Extention Arbor Shaft 25mm, ER20, 2) 226-3300 Long Mill/Drill Unit, ER20, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
HWACHEON HI-TECH 300LMC LIVE TOOL LONG BED CNC TURNING CENTER BUILT: 9-2005/ Installed in 2006 SPECIFICATIONS: CHUCK SIZE 12” MAXIMUM SWING 23.62” MAXIMUM CUTING DIAMETER 14.9” MAXIMUM MACHINING LENGTH 48” Long Bed Version) BAR CAPACITY 3.1” X-AXIS TRAVEL 11” Z-AXIS TRAVEL 50” SPINDLE MOTOR 30 HP SPINDLE SPEED 25– 3200 RPM(2 SPEED GEAR BOX) SPINDLE NOSE/ SPINDLE BORE A2-8 TOOL TURRET TYPE 12-POSITION TURRET MILLING SPINDLE on TURRET 5HP/ 3000 RPM STANDARD CUTTING TOOL 1” BORING BAR SIZE 2” RAPID TRAVERSE 708 I PM TAILSTOCK QUILL STROKE 4.72” TAPER OF TAILSTOCK QUILL MT#5 DIMENSIONS(w/o chip conveyor) 157” x 74” x 84” High WEIGHT 23.000 LBS. EQUIPPED WITH: FANUC 18i-TB with COLOR LCD DISPLAY· FULL C AXIS/ LIVE TOOL MACHINE· AUTOMATIC TOOL SETTER· 12” 3 JAW HYDRAULIC CHUCK(HOWA BRAND) PROGRAMMABLE TAILSTOCK BODY& QUILL· ... more12-POSITION TURRET/ 6 of 12 STATIONS ARE LIVE/ 8 STD BORING BAR HOLDERS· TURBO LIFT UP CHIP CONVEYOR/ COOLANT SYSTEM· HWACHEON MANUALS INCLUDED· 4 RADIAL LIVE TOOL HOLDERS INCLUDED· HEAVY DUTY BOX WAY CONSTRUCTION· CUSTOM STEADY REST w/ MANUAL OPEN& CLOSE(SEE PHOTO) PRICE: $114.900 F.O.B. FREMONT. CA(PREP& LOADING INCLUDED) TERMS: DUE IN FULL PRIOR TO SHIPMENT WARRANTY: AS IS PER BUYER INSPECTION NOTE: INSPECT UNDER POWER IN OUR FREMONT SHOWROOM VIDEOS: First is an overview of the machine running. http:www.youtube.com/watch?v=ZoRhxReMfWo&list=UU5mLJbgLTLjM6pqbj8dNPmQ&index=2 This video is of the spindle in high and low gear. http:www.youtube.com/watch?v=v4slfhGvGO4&list=UU5mLJbgLTLjM6pqbj8dNPmQ&index=1 Call or email us with any questions. We can also assist in getting a trucking quote for you. We will included machine prep and loading. Thank you for your interest. We look forward to working with you. Sincerely, PERFORMANCE MACHINE TOOLS/ Sales Team
Citizen C16 CNC Swiss lathe. Serial#X11132. Buy it now $63.000.00 or make best offer! Mfd. 2002. With LNS hydrobar single tube bar loader. 3 cross live tools. Mist buster. Cool blaster. Excellent condition. Watch the Citizen run! For more information contact Jim at. Phone: 708-217-2476 Fax: 847-400-0790 or iphone facetime Skype name: jimgraff We sell worldwide. Buyer pays loading and shipping. Machines and Tooling must be paid for. Shipped and/or picked up within 7 days of winning bid. We accept payment by wire transfer or company check only. While we sell machines worldwide. Graff Machine Tools is not a shipper or rigger. Please ask your rigger or shipper for an estimate of loading, shipping cost and time. If you do not have a rigger or shipper, we will suggest several companies you can contact.
NOMURA NN-20BII CNC SWISS LATHE SCREW MACHINE 1995 W/FMB 5-42 BAR LOADER SPECS: Control; Mitsubishi Meldas 320LV CNC MAX Machining Diam; 20mm MAX Machining Length; 7.87" Main Spindle Speeds; 300-10.000 RPM Main Spindle Indexing; 15 degrees Back Spindle Speeds; 200- 6.000 RPM Sub-Spindle Indexing; No Indexing Rotary Tool Speeds; 200- 6.000 RPM Back Spindle Max Chucking Diam; 20mm Turning Tools; 5 Static on Main Spindle Rotary(Live) Tools; 4) Live Tools on Main Spindle Front Endworking Tools; 3 Stations Back Endworking Tools; 3 Stations Endwork Plus(1) Static Back Turning Raid Traverse(X/Y/Z) 551 IPM X/ 787 IPM Z Main Spindle Drive; 5 HP Rotary Tool Drive; 53 HP Equipped with: Mitsubishi Meldas 320LV CNC Control. RS-232 Port, Parts Catcher/ Small Part Conveyor.Assorted Tool Holders, Filtermist Mist Collector, FMB Turbo 5-42 Bar Loader ... moreElectrics: 220 V. 3 Phase Main Unit Approx. Weight: 5100 lbs Main Unit Dimensions(in inches) L 92" x W 50" x H 78" Machine is available for inspection under power by appointment. ALL ITEMS ARE SOLD AS IS. WHERE IS stock#043 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e8e202be8-0x105-
Please Refer To Machine# 944885 Promach CNC Vertical Mill PM-40S M2824 Millers- Vertical Longitudinal Travel Cross Travel Vertical Travel Quill Travel Manufacturer Promach CNC. Model No. PM-40S. Serial No. 2405. Year Mfg. 1996. Table Size 12" x 50" T Slotted Table. Spindle Spds And Type(Variable. Belted, etc) Spindle Taper 40 Table. Motor HP 5 HP. Features/Accessories Box Ways. Power Draw Bar. Condition Comments FOB Point Elk River MN.
Manufacturer: CITIZEN | Stock Number: 00147-A-0512 | Description: CITIZEN B12 TYPE 1 CNC LATHE Year: 1996 Specifications: Comes with Ikura Seiki automatic barloader 12.7 mm capacity Headstock travel 135mm 65mm with rotary guide bushing 12000 rpm 5 turning tools 3 end working tools Installed in 1997 Fanuc 16T control Other information: Good condition In stock Additional information and/or images of this product may be available– please contact us and we will send it to you. Please check out our other items for sale by clicking‘See other items’ to the upper right. Thank you for viewing this item. We stand behind all items we sell and you may purchase with confidence. If you would like more information please feel free to contact us. Our contact info is located at machinerywarehouse.ca. This item is available for previewing at our warehouse ... morein Hamilton. Ontario. Please contact us to arrange a personal viewing if you wish to inspect this item before purchasing. Pick up in Hamilton. Ontario is welcome(during regular business hours) and can be arranged at no extra charge. If you wish to have the item shipped, we will provide you with the item weight and dimensions. You are responsible for making your own shipping arrangements with a freight forwarder or carrier. If you decide to purchase this item. Please wait for our invoice before making payment. We accept Visa, MasterCard, American Express, Paypal and certified cheque. Payment must be received within five business days or sale will be void and item will be relisted. Canadian customers will be charged GST or HST(depends on your province/territory) International customers are not charged Canadian tax. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e8e202c45-0xf1-
Reference#22863 HITACHI SEIKI HG-400II CNC Horizontal Machining Center Age 1998 Seicos EM 16M CNC Control X-Axis. 22.04" Y-Axis. 22.83" Z-Axis. 20.07" Pallet Size. 15.75" x 15.75" Table Center to Spindle Nose. 4.92" 25" Pallet Indexing. 001 degrees Spindle Speeds(Inf. Variable) 6-12.000 RPM Spindle Taper. 40 CAT EQUIPPED WITH: Seicos EM 16 M CNC Controls 60-Station Automatic Tool Changer Spindle Chiller Complete Enclosure Guards. Contact for Machine Location
WARNER& SWASEY 25C-M5060 CNC LATHE W/FANUC 21i-T CNC CONTROL SPECIFCATIONS: Chuck Size: 12" Spindle Nose: 11" A1 Thru Hole in Spindle: 5" Bar Capacity: 4 1/2" Max Swing diameter over turret bar: 24 1/2" Max Swing diameter over turret face: 16 1/2" Longitudinal Work Area: 26 1/2" Tooling OD Cutter(qualified) 1 1/4" sq x 6" Bore in ID Holder: 3" Turret with Coolant Distributor: 12 stations Longitudinal Stroke: 12" Cross Stroke: 8 3/4" Max Motion Rate: 01 to 300 IPM Motor-Heavy Duty DC Variable Speed Standard: 50 HP Spindle Speeds: 35- 1518 RPM High Clutch Spindle Speed Range: 100-1518 RPM Low Clutch Spindle Speed Range: 35- 519 RPM Floor Space(approx) With Cabinet Doors Open: 222" x 113" Shipping weight(approx) 17.000 lbs Equiped with: Coolant Pump. Work Area Enclosure, ... more5 Plain Heads, 7 Turning Heads, Chip Conveyor, Tailstock, Work Light and a Fanc 21it cnc control. Machine was refurbished and retrofitted with Fanuc Control 21i-t. With Fanuc motors, drives and chuck in 2007 by previous owner. Gardner Denver Compressor, in Quincy, MO power on- 21.883 hrs cut time- 4.398 hrs operator time- 1.924 hrs ALL ITEMS SOLD AS IS. WHERE IS stock# 053 MACHINE IS AVAILABLE FOR INSPECTION UNDER POWER BY APPOINTMENT BUYER IS RESPONSIBLE FOR ALL SHIPPING ARRANGEMENTS AND COST. LINK TO VIEW MACHINE RUNNING:
QUOTE#25619. ZL-15S MORI-SEIKI 4-AXIS CNC TURNING CENTER New 1994. Serial No 427, Model ZL-15S EQUIPPED WITH: Mori-Seiki MF-D6 CNC Control FMB Turbo 5-42 Bar Feed Collet Chuck on Main& Sub Spindle 12-Position Upper Turret 6-Position Lower Turret Parts Catcher- Chip Conveyor CATALOG SPECIFICATIONS: Bar Capacity. Round. 1.6" Spindle Bore. 2.05" Swing Over Bed. Maximum. 18.9" Swing Over Cross Slide. 14.6" Turning Diameter. Maximum. 9.06" Turning Length. Maximum. 3.94" Distance Between Spindle Noses. 23.4" Rapid Traverse Rate. X-Axis. 472 IPM. Rapid Traverse Rate. Z-Axis. 590 IPM. Spindle Speeds. Main Spindle. 50-5000 RPM. Spindle Speeds. Sub Spindle. 60-5000 RPM. Main Spindle Drive Motor. Horsepower. 10/7.5 HP. Subspindle Drive Motor. Horsepower. 7.5/5 HP. Floor Space Required. W x D. 198" x 109" ... moreOverall Height. 79" Weight Approximately. 12.276 LBS. PRICE: F.O.B. OUR WAREHOUSE. $59.500.00. Machinery/Equipment Subject to Prior Sale.
QUOTE# 22880. V200 INDEX CNC VERTICAL TURNING LATHE New 1997. Serial No V200100299, Model V200, EQUIPPED WITH: Index#C200-4 CNC Control w/10" Monitor(14) Station Tool Turret w/Tooling Vertical Thermosymmetric Headstock Hydraulic Solid Chuck Actuator 5.12" Chuck- Variable Speed AC Drive Through Spindle Coolant CATALOGUE SPECIFICATIONS: Swing Diameter. Maximum. 16.54" 420MM. Turning Length. 7.87" 200MM. Compound Slide X-Axis Travel. 20.47" 520MM. Compound Slide Z-Axis Travel. 7.87" 200MM. Spindle Through Capacity. 2.3" 60MM. Spindle Speed Range. 0 to 5000 RPM. Compound Slide Feed Force. 1124LBS 5000N. Compound Slide Rapid Traverse. 1181 IPM 30 MPM. Chuck Actuating Stroke. 1.26" 32MM. Spindle Horsepower@ 100% 27 HP 20 KW. Spindle Horsepower@ 40% 39 HP 29 KW. Floor Space Required. L x W. 6'11" ... morex 6'3" Weight Approximately. 7300 LBS. NOTE: This Machine Appears To Be In Very Good Condition With A Replacement Price Of Over $230.000.00 PRICE: F.O.B. OUR WAREHOUSE. $29.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
QUOTE# 24620. EMCO-MAIER EMCOTURN 465MC TWIN-SPINDLE 6-AXIS CNC TURNING CENTER New 1999. Serial No. R4B-A03-M1003 EQUIPPED WITH: Siemens 840D 6-Axis CNC Control(2) 12-Position Turrets w/ Live Milling All Stations 7" 3-Jaw Chuck On LH Spindle. Collet Chuck On RH Tool Presetter For Both Turrets- C Axis Left& Right Sub Spindles- Coolant System- Chip Conveyor Automatic Gantry Loading System CATALOGUE SPECIFICATIONS: Maximum Diameter Bar Stock. 2.56" Swing Over Bed. Maximum. 14.5" Turning Length. 7.4" Spindle Nose. A-6. Cross Travel(X-Axis) 9.5" Longitudinal Travel(Z-Axis) 7.4" Longitudinal Travel RH Spindle(Z2-Axis) 26.77" Turret Index Time. 0.1 Second. Toolholder. VDI 30. Main Spindle Speeds. Range. 0-4000 RPM. Live Tool Spindle Speeds. Range. 0-4000 RPM. Left Spindle Drive. Horsepower. 20 HP. Right Spindle ... moreDrive. Horsepower. 15 HP. Live Tool Drive Motor. Horsepower. 7.5 HP. Electrical System. 440/3/60. PRICE: F.O.B. OUR WAREHOUSE. $69.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
QUOTE# 24621. EMCO-MAIER EMCOTURN 465DS TWIN-SPINDLE 6-AXIS CNC TURNING CENTER New 1999. Serial No. R4B-V01-M37004 EQUIPPED WITH: Siemens 840D 6-Axis CNC Control(2) 12-Position Turrets w/ Live Milling All Stations 7" 3-Jaw Chuck On LH Spindle. Collet Chuck On RH Tool Presetter For Both Turrets- C Axis Left& Right Sub Spindles- Coolant System- Chip Conveyor Automatic Gantry Loading System CATALOGUE SPECIFICATIONS: Maximum Diameter Bar Stock. 2.56" Swing Over Bed. Maximum. 14.5" Turning Length. 7.4" Spindle Nose. A-6. Cross Travel(X-Axis) 9.5" Longitudinal Travel(Z-Axis) 7.4" Longitudinal Travel RH Spindle(Z2-Axis) 26.77" Turret Index Time. 0.1 Second. Toolholder. VDI 30. Main Spindle Speeds. Range. 0-4000 RPM. Live Tool Spindle Speeds. Range. 0-4000 RPM. Left Spindle Drive. Horsepower. 20 HP. Right Spindle ... moreDrive. Horsepower. 15 HP. Live Tool Drive Motor. Horsepower. 7.5 HP. Electrical System. 440/3/60. PRICE: F.O.B. OUR WAREHOUSE. $69.500.00. Machinery/Equipment Subject to Prior Sale.
Quote# 25618. HARDINGE COBRA 42 2-AXIS CNC LATHE New 1996. Serial No. C-265-T, MODEL COBRA 42 EQUIPPED WITH: Fanuc#21TB CNC Control w/CRT Tailstock Collet Chuck- 12-Position Turret 10 HP Spindle Drive Motor Chip Conveyor CATALOGUE SPECIFICATIONS: Bar Capacity. 1.625" Maximum Turning Length. 14" Maximum Turning Diameter. 8.25" Spindle Nose. A2-5" Maximum X-Axis Travel. 17.7" Max. X-Axis Traverse Rate. 400 IPM. Longitudinal Travel(Z-Axis) 14" Max. Z-Axis Traverse Rate. 630 IPM. Spindle Speeds. to 5000 RPM. Spindle Motor. 10 HP. PRICE: F.O.B. OUR WAREHOUSE. $17.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
PUMA CNC LATHE TOOL PRESETTING PROBE GUARANTEED NOT DOA REMOVED FROM A PUMA CNC LATHE ORIENTAL MOTOR 4TK10GN-A TORQUE MOTOR Powered by The free listing tool. List your items fast and easy and manage your active items.
INDEX ABC CNC LATHE TURNING CENTER- 51mm(2 inch) BAR CAPACITY SUB SPINDLE with LIVE TOOLS WATCH MACHINE ON YOUTUBE.COM CLICK LINK BELOW SIEMENS CONTROL 8 STATION UPPER TURRET- 6 STATION LOWER PART CATCHER CHIP CONVEYOR 12 ft. auto loading bar feed All tool holders shown in pictures and video included. instruction manual- electrical manual included RIGGING& SHIPPING ARE THE RESPONSIBILITY OF THE BUYER! Call CNC Digital for more info. 440-263-1878 SUBJECT TO LOCAL SALE. A $500 DEPOSIT IS DUE IMMEDIATELY THRU PAYPAL. BALANCE DUE WITHIN 3 BUSINESS DAYS. ALL CHECKS MUST CLEAR BEFORE MACHINE RELEASE. WIRE TRANSFER PREFFERED. Terms& Conditions of Sale: ACCEPTANCE: Purchasing equipment from CNC Digital. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICE: All Prices are in ... moreU.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Buyer is responsible for any applicable taxes. SHIPPING: BUYER IS RESPONSIBLE FOR LOADING(RIGGING) AND TRANSPORTATION from F.O.B. point. CNC Digital. Inc. is not responsible for any damage due to weather, rigging, trucking, or any damage involved in transport, loading, unloading or situations beyond CNC Digital, Inc. control. ACCEPTANCE: All Sales are made with the understanding that orders are not subject to cancellation. And that a Payment in Full is REQUIRED prior to machine release. NO WARRANTY: The goods described are pre-owned used goods and are offered"As Is" where is" Seller makes no warranties or guarantees of any kind, either expressed or implied, of merchantability, and fitness for a particular purpose. All specifications, descriptions of equipment should be used as a guide only. It is the buyers responsibility to inspect item(s) and details of machine capabilities prior to bidding or purchase. CNC Digital, Inc. reserves the right to correct any typographical errors. INDEMNIFICATION: Seller does not warrant that the used equipment complies with O.S.H.A. safety standards. Buy
Pratt& Whitney Star-turn 1800 18" chuck with chuck jaws and collets 8 tool turret positions 33" swing Z- axis travel 60" 0-1600 RPM 50 hp Tailstock Chip conveyor Pallet of chuck jaws 20+ collets Teammate control 3 extra control cabinets Still hooked up to power Thanks For Looking
ebay template SL- 20T 2004 Tailstock CNC Turning Lathe I TEM S OLD A S P ICTURED PACO NOT INCLUDED The SL-Series Haas CNC Lathes offer a wide range of turning options and capacities. The SL-20 is considered to be Haas’ versatile lathe with plenty of power to do YOUR job! This beautiful Haas CNC Lathe is in good condition. Take a look at the pictures below to see this spectacular machine! Full demonstrations available! Come into our fully powered showroom and see this BEAUTIFUL Haas CNC Lathe at a BEAUTIFUL PRICE! Affordable and reasonable! Buy through us Machinery Exchange Inc. A trusted& conscientious MDNA dealer, get assurance and peace of mind with your money-saving investment! INCLUDES 8” Chuck Coolant/Chip Pan Assembly Tooling/Holders As pictured FEATURES Made entirely in The U.S.A. Fully Programmable Hydraulic Tailstock 10-Position ... moreAutomatic Turret with VDI Type Turret Configuration 50 to 3.400-RPM High Torque Spindle Driven by a 15/20 HP Intermittent Duty Spindle Motor Chip Auger Automatic Lubrication System Dual RS-232 Ports One Button Power-up User Friendly Haas Control Graphic Tool-Path Verification Double Anchored Ballscrews for 100% Parallelism Heavy-Duty Sheet metal Enclosure ISO Standard G-Code Programming Fast and Powerful Fanuc Compatible 32-Bit CNC Control SPECIFICATIONS SWING DIAMETER S.A.E. Metric Over Front Apron 23.0" 584 mm Over Cross Slide 9.5" 241 mm CAPACITIES S.A.E. Metric Chuck Size 8.3" 210 mm Max Cutting Diameter 10.3" 262 mm Max Cutting Length 20.0" 508 mm Max Cutting Length w/Std Workholding 19.0" 483 mm Bar Capacity 2.0" 51 mm Between Centers 24.0" 610 mm TRAVELS& FEEDRATES S.A.E. Metric X Axis 8.45" 214.6 mm Z Axis 20.00" 508.0 mm Rapids on X 1200 in/min 30.5 m/min Rapids on Z 1200 in/min 30.5 m/min Max Thrust X 2400 lb 10676 N Max Thrust Z 3700 lb 16458 N SPINDLE S.A.E. Metric Spindle Nose A2-6 A2-6 Max Rating 20 hp 14.9 kW Max Speed 4000 rpm 4000 rpm Max Torque 154 ft-lb@ 650 rpm 209 Nm@ 650 rpm Spindle Bore ø 3.00&q
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 20.5" Swg 24.6" cc Mori Seiki SL-25B/500 CNC LATHE. Fanuc 16T, Toolsetter, 12"ch Ref# 149575 iammdna XCNCTC 1997 MORI SEIKI SL-25B/500 CNC TURNING CENTER SPECIFICATIONS: Chuck Size. 12" ... moreMax Diameter Bar Capacity. 2.5" Max Swing Over Bed. 20.5" Max Swing Over Carriage. 13.8" Max Turning Diameter. 10.2" Distance Between Centers. 24.6" Max Machining Length. 20.9" Spindle Motor. 20/ 15 HP AC Spindle Speed. 35- 3500 RPM Spindle Bore. 3.15" Spindle Nose. A2-6 Tools. 10 Rapid Traverse Rates(X/ Z) 472/ 590 IPM X-Axis Travel. 6.3" Z-Axis Travel. 23.2" Tailstock Taper. MT#3 Turret Index(Single Step/ Full) 0.7/ 1.5 Seconds Machine Dimensions. 112" x 63.4" x 74.6" Approx. Machine Weight. 9240 lbs. EQUIPPED WITH: MORIC MSD-516(FANUC 16T) CNC CONTROL 14" Color CRT Super Caps Conversational Programming 12" Matsumoto ZA8-12-93-12 Hydraulic 3-Jaw Chuck Tool Presetter Programmable Tailstock Turbo Chip Conveyor(Side Exit) Slant Bed Box Way Construction All Available Toolholders and Manuals Machine Location: Click Here For More Mori Seiki Machines Click Here For More CNC Machines- C
Miyano BNC-34S CNC lathe. Serial#BN30550S. Buy it now $17.500.00! Mfd. 1990. GE Fanuc OT. With subspindle. Single turret. LNS hydrobar bar feed Type 6.35HS-4.8. 33364. Watch the Miyano run! For more information contact Jim at. Phone: 708-217-2476 Fax: 847-400-0790 or iphone facetime Skype name: jimgraff We sell worldwide. Buyer pays loading and shipping. Machines and Tooling must be paid for. Shipped and/or picked up within 7 days of winning bid. We accept payment by wire transfer or company check only. While we sell machines worldwide. Graff Machine Tools is not a shipper or rigger. Please ask your rigger or shipper for an estimate of loading, shipping cost and time. If you do not have a rigger or shipper, we will suggest several companies you can contact.
aims 1996! FEMCO DURGA-25E CNC TURNING CENTER w/ FANUC O-M CONTROL + CHIP CONVEYOR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Femco Inc. This is a used CNC Turning Center in GREAT condition. Model# DURGA-25E Serial# L5E880 Date of Manufacture: 01/1996 Retails for over $70.000.00! Photos were taken on location. But machine will ship from our Irwindale, CA warehouse. Features: Turret- The turret is a proven and mature twin disk design with an exclusive ... moreFEMCO patent. The turret holds 12 OD tools on the front disk and 11 ID tools on the rear disk. Bi-directional. With automatic selection of the shortest route. Index time is a quick 1 second to the nearest tool and 1.8 seconds to the farthest tool. Bed and Saddle- The bed is a one piece casting of close grain meehanite cast iron. The ribbing locations and wall thickness are placed in strategic locations determined by computer finite element analysis. This design assures consistent accuracies and excellent finishes. The saddle has a 30 degree incline. Directing chips and coolant to the chip conveyor. Spindle and Headstock- The headstock is a precisoin machined close grain meeganite casting assuring precise alignment of the critical spindle bores. The pindle rotates on six precisoin class P4(AFBMA B7) bearings and are permanently grease lubricated. The large 2.4" spindle provides for a 2.04" bar working diameter. Spindle and Drive- The high torque 20 Horsepower Fanuc spindle motor gives the power for heavy stock removal and minimizes the number of roughing cuts taken. The powerful A.C. digital spindle drive system gives fast spindle acceleration and excellent low end tor
OKUMA MODEL MC-V4020 VMC 2004/05 Machine In Superb Condition Less The n 6.000 Hours EQUIPPED WITH: OSP-E100M CNC 15.000 RPM Spindle 32 Position ATC 1000 PSI Thru Spindle Coolant 4th Axis Wired High Column Option Chip Conveyor Transformer All Available Manuals SPECIFICATIONS: Machine Travels 40.0" x 20.0" x 17.7" Table Size 48" x 20" Load Capacity 1.540 Lbs Spindle Taper CAT-40 Rapid Traverse(X/ Y) 1,417 IPM Rapid Traverse(Z) 1,187 IPM Main Spindle Motor 15 HP Spindle Speeds 15,000 RPM Tool Magazine Capacity 32/ Side-Mount Machine Weight: 13,750 Lbs Machine Size 130 x108 x 105 INSPECT UNDER POWER IN Philadelphia PRICE: $ 79.5 8 0.00“ AS INSPECTED ON LOCATION” IN PA For Inspection or More Info Please Call Maury Cohn 1 800 888 4312
Im selling our 1996 Hyundai HIT 18s lathe with an 8 station turret. We do very little lathe work in our facility and need to move this out to make room for another mill. Weve owned the machine for about 2 years and In that time I only ran it a few times. It has a less than 3 year old 10" 3 jaw chuck. A tailstock and a conveyor. With me having ZERO Seimens control experience and not having a good manual to go by its been easier to knock the few parts we do get out on a manual lathe than it would be to set this thing up. Im listing it in NON working condition because when I started it up to take the picures Im getting a servo alarm for the spindle(see picture of alarm number on screen) Im not sure whats causing it. For those of you who know these machines it could be an easy fix. Overall the machine is in good condition and holds tolerance. ... moreSince buying machines and shipping is usually a headache I will help out by covering the rigging cost at MY FACILITY ONLY. One less thing youll have to worry about. Please contact for any questions. Thanks!
American 3220 CNC Lathe and the Fagor 8025 Control. This lathe was remanufactured in 2000-2001 with new and rebuilt ball screws. AC Digital Drives, rebuilt x- axis. Linear encoder on x- axis. Eurotherm Main Spindle Drive. Not a lot of use since machine was rebuilt in 2000-2001. The 3220W swings over 32" and 10' between centers. This is a good machine and I just do not have the work to keep it. Machine is being sold as it is. Please inspect before purchasing to make sure the machine is what you want. We will load on your truck at our shop. We recommend buyer hires Apollo Machine Tool Services in Arlington. Texas to unhook the machine for shipment and to get it going again on your floor. Buyer is responsible for all shipping cost. Cashier's check or wired funds to my bank only before machine is unhooked and loaded. 6gf1.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13eafe716f3-0xf7-
1993 Star SST-16 CNC LATHE SPECIFICATIONS: Maximum Cutting Diameter 0.62” Max. Head Stock 12.2” Spindle Bore 0.62” Spindle Speed 10.000 RPM Spindle Motor 3 HP Turret Positions: Main Spindle 9 Turret Positions. Sub-Spindle 3 Turret Positions Sub-Spindle Speed 6.000 RPM Sub-Spindle Motor 2 HP Machine Dimensions(Approx. 6.73' x 3.25' x 5.53' Machine Weight(Approx. 5070 lbs. EQUIPPED WITH: Fanuc O-TT Control. 12’ FMB Mini Turbo Barfeed. Back Working. Live Tooling. ReSell CNC Servicing the Needs of Manufacturers Worldwide ORLANDO | CHICAGO | HOUSTON | LOS ANGELES 2600 Maitland Center Parkway#290 Maitland FL. 32751 Email: Curt@ReSellCNC.com Website: Office) 407-478-8181 TERMS: Full payment via bank wire prior to removal-See Terms& Conditions for details. Machine sold"as is where is" with no expressed or implied warranties-Machine ... moresold free and clear of any and all liens and encumbrances. Out of state sales no taxes. Buyer responsible for all rigging and shipping charges. Subject to additional Terms and Conditions found on reverse side or attached hereto which customer acknowledges it has read and agreed to an invoice. Signature acknowledges final Invoice as a legal binding contract. Any and all disputes will be handled under Florida law in Seminole County. ReSell CNC LLC Location(Office) 2600 Maitland Center Pkwy. Suite 290 Maitland. FL 32751(Warehouse) 1065 Nursery Rd. Suite 1115 Winter Springs FL 32708 Quotations and Acceptances are subject to prior sale and immediate acceptance. And to change without notice. Orders are not subject to cancellation. Unless by written mutual consent. We reserve the right to correct typographical errors. It is understood that there are no conditions or agreements outside of this written proposal. Any clauses in the customers purchase orders which are contrary to these terms and conditions shall be null and void upon acceptance by the buyer of this proposal. ALL prior conversations, agreements and representations with reference to the subject matter are supersed
More photos detail and video are available upon your request. Call Gregg. Scott, Mark or Steven Doosan Daewoo Puma 2000SY CNC Lathe with Live Tool and Sub Spindle and Y Axis(2005) Installed in(2006) Y Axis. Sub Spindle, Live Tooling, Bar Feed, Chip Conveyor, Fanuc 18iTb CNC Specifications(Preliminary) Swing Over Bed: 23.6" Swing Over Carriage: 21.6" Distance Between Spindles: 33.8" X-Axis Travel: 9.84" Y-Axis Travel: 3.94" Z-Axis Travel: 22.8" Spindle Speeds: 5000 main/ 6000 Sub, Equipped With: Full'C' axis on both Spindles. 6" Sub-Spindle Chuck, Collet Chuck on Main Spindle Chuck, Automatic Tool Presetter, Rigid Tapping On Both Spindles/ Nice Assortment of Live Tooling, Tool Monitoring System, Box Way Construction, Turbo Systems Chip Conveyor, SMW Space Saver 2200 Barfeed, Y" Axis Traverse, ... moreContact Us Call for more information: 773-866-9600. Ask for Gregg or Scott Click for video:
1989 DAEWOO PUMA 10 TURNING CENTER WITH JORGENSON CONVEYOR. FANUC CONTROLS, OT SERIES. GREAT WORKING CONDITION. REMOVAL AND SHIPPING WILL HAVE TO BE ARRANGED BY BUYER OR WE CAN GET A QUOTE TO HAVE IT MOVED AND SHIPPED.FOR ANY QUESTIONS CALL 636-532-7000 MONDAY THRU THURSDAY AND ASK FOR HOWARD. WAS LISTED FOR $ 14,995.00* NOW MARKED DOWN TO $ 12,500.00. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13eb07d4533-0x105-
` QUALITY NEW AND USED CNC AND MANUAL MACHINERY INCLUDING MILLS AND LATHES. CENTROID, ANILAM, FANUC, CHECK US OUT FOR TOOLS AND SUPPLIES CHARNEY MACHINE& TOOL. INC 160 84th STREET SW BYRON CENTER. MI 49315 616-455-3800 Mazak QT-15N CNC Lathe Quckturn Programmable Tailstock Mazatrol T32-2 CNC Control Our Stock Number 1239-020113 Machine Description MAZAK QUICKTURN 15N CNC TURNING CENTER Year: 1990 Serial# 87984 Specifications: are accurate to the best of our knowledge) Chuck Size 8" 3-Jaw Swing Over Bed 17.32" Max. Turning Length 19.69" Max. Turning Diameter 11.81" Max. Bar Diameter 2" Spindle Nose A2-6 Spindle Bore 2.4" Travels X-Axis 7.09" Z-Axis 20.08 Spindle Motor 20/15 HP Electrics 3/60/460 Rapid Traverse 1180 IPM Cutting Feed Rate 197 IPM No Station On Turret 8 EQUIPPED WITH Mazatrol T-32-2 CNC ... moreControls. Tool Presetter Programmable Tailstock 8" 3-Jaw Hydraulic Chuck Chip Conveyor Coolant System Approximate Overall Dimensions: 98" L-R x 60" F-B x 80" H(Does not include bar feed) Approximate Weight: 10.000 Lbs. Tooling pictured not included This machine is in good working order. You may inspect under power. in Byron Center. MI 49315 Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted.
Please see info below and photos on a really nice Okuma Captain L-370 BBMW CNC Lathe with Live Tooling. C-Axis, and Sub Spindle. This machine is loaded with options. Please see description below. It is under power in Cincinnati, OH and is available to show to you. This Okuma Captain has less than 4800 Cutting Hours. This machine will make someone an excellent machine. I do have the ability to load this on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. OKUMA CAPTAIN L-370 BBMW CNC TURNING CENTER w/ Live Tooling& Sub-Spindle Model Captain L-370BBMW. New 2005 EQUIPPED WITH: Okuma E100L CNC Control w/CRT. Live Tooling, 6.5" Kitagawa 3-Jaw Chuck Sub-Spindle, 10" Kitagawa 3-Jaw Chuck Main Spindle, ... moreLive Tooling, C-Axis, 3.15" Big Bore Spindle Bore Option, Touch Setter, One Touch IGF, 3D Animation, Tool Life Management, Tool Wear Compensation, Lap 4, User Task 2, Exp. Auto Chamfering, Programming Help, Servo Link NC, Servo Link Spindle, Heavy Tools, HI-G Control, Inch/Metric Switchable, 2) Axial Live Holders, Chip Conveyor and Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 20.08" Maximum Turning Diameter Main Chuck. 14.56" Maximum Turning Diameter Sub-Spindle. 8.23" Maximum Turning Length. 20.47" Main Chuck Size. 10" Sub-Spindle Chuck Size. 6.5" Cross Travel(X-Axis) 10.23" Longitudinal Travel(Z-Axis) 20.47" Feed Range(Infinitely Variable) 1-400 IPM Rapid Traverse Rate(X-Axis) 787 IPM. Rapid Traverse Rate(Y-Axis) 984 IPM. Number of Turrets. 1. Tool Positions.
Up for sale is this Hardinge Super Slant CNC lathe with a Fanuc GN6 control system. The machine seems to be in good condition. But the paint is bad. Machine was originally Blue, but has been poorly painted white. I does have a chip conveyor. Hydraulic chuck and manuals are included. I bought this machine to retrofit a new control on to for development. Got it to my rigger and it is to large for me to handle with the equipment I have access to. The previous owner stated that the machine powered up but needed"parameters" installed. I planned on upgrading the older Fanuc control to a newer PC based unit. My loss is you gain. Please contact me for more information and I will do my best to help you. It has been re painted at some point. Not very well done. I really do not know a whole lot more than what I have stated. I can have it loaded. ... moreAnd even arrange a shipper. Thank you
2006 Milltronics ML22 Lathe. 60" Between Centers. 8 Station Tool Changer. 16" Bison Adjustable Chuck. Manual Tailstock. Chip Conveyor. Steady rest. Surplus to our needs.
HWACHEON CUTEX-240 CNC TURNING CENTER with LIVE TOOLING and SUB-SPINDLE Model Cutex-240ASMC. New 6/2006 Stock# K13610 EQUIPPED WITH: Fanuc 0i-TC CNC Control. Multiple Part Program Storage, RS-232 Port, Live Tooling. Full Contouring C-Axis Spindle, Sub-Spindle, Parts Catcher, Barfeed Interface, MTA 12' Magazine Bar Feeder. Sub-Spindle Part Ejector, Rigid Tapping with Rotary Tools. Chip Conveyor and Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 22.8" Max Turning Diameter. 15" Max Machining Length. 23.6" Standard Chuck Size. 8" Spindle Bore. 2.99" Spindle Nose. A2-6 Cross Travel(X-Axis) 8.46" Longitudinal Travel(Z-Axis) 26.19" Rapid Traverse Rate(X-Axis) 1417 IPM Rapid Traverse Rate(Y-Axis) 1417 IPM Number of Turrets. 1 Tool Positions. 12 Total Spindle Speed Range. 50-5000 RPM Spindle Horsepower. ... more25 HP Sub-Spindle Speed Range. 60-6000 RPM Sub-Spindle Horse Power. 10 HP Milling Spindle Speed Range. 50-5000 RPM Milling Spindle Horse Power. 5 HP Approximate Machine Dimensions. 161" x 84" Approximate Machine Height. 73" Approximate Machine Weight. 10.000 LBS All Tool holders. Collet pads and manuals included. Machine is in excellent working order and is under power in production use. I have video of it running if you want to see it e-mail me. $2500 Deposit required within 24 hours of purchase. Purchaser is res
OKUMA LU-15-2SC-600 4-AXIS BIG BORE CNC LATHE TURNING CENTER General Specifications Swing over saddle 14.96" Max. Turning diameter 14.17" Max. Turning length 23.62" Travels(X1& X2) 10.24" 5.50" Travels(Z1& Z2) 25.20" 24.21" Spindle bore diameter 3.15" Spindle nose A2-8 Spindle motor 30 HP Spindle speeds(2 ranges) 75-3800 RPM Tool positions upper 12 Tool positions lower 8 Rapid traverse X-axis 591 IPM Rapid traverse Z-axis 787 IPM Tailstock Taper MT5 Tailstock quill travel 4.72" Approx. weight 12.000 Lbs Motor Specifications Not Available Equipped With OSP 7000L CNC Control(2) Turrets 8 Station Lower 12 Station Upper Chip conveyor Tailstock Collet chuck Turret position compensation Tool life management. Auto door, NC Turret, In/Metric, Animation, Load monitor, Touch setter, Mac Management, ... moreTool gauging system, Lap 4, Nose-R 2B, User task 2, Exp. Auto champfering. Serial Number 821 Year 1997 Location Livonia. MI
We are selling this Yam CK-2 CNC Lathe. It has a Fanuc OT Control. 10" Chuck Turret, and ProgramableTailstock. The machine is in good condition.The outside of the machine could use a little touch up paint, other than that, it's in good shape.This machine is located in Washington State. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions Machine is being sold as is. Where is.
ID# 90173 Machine Specifications: Max Machining Length. 18.5" Diameter of Spindle Face. 5.5" ID of Draw Tube. 1.41" Spindle Nose. A2-5. Spindle Speeds. 25- 5.000 RPM. Spindle Motor. 10 HP. X-Axis Travel. 5.75" Z-Axis Travel. 13.5" Rapid Traverse X. 315 IPM. Rapid Traverse Z. 354 IPM. Turret Positions. 8. Tailstock Max Stroke. 9.844. Tailstock Max Adj Pressure. 1.400 lbs. Equipped With: Fanuc 3T Control. Collet Chuck. Chip Conveyor. Chip Pan. Tailstock. All Available Manuals and Tooling. Machine Dimensions(Approx) 11ft(L) x 6ft(W) x 6ft(H) Machine Location: MI. Additional Information: Machine can be seen under power. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer ... moreis responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Jason Sanda at 847-497-9800 for any questions and for payment detail.
Equipped With: Autocon Delta Dynapath CNC control- Teach mode- G code programming- Constant surface speed Electronic hand wheels for manual operation 12" 3 Jaw chuck Sauter Disc Type Tool Turret 0.5.480.516-089 768 Manuals included Lathe was re-furbished by local machinery re-builder prior to our purchase. We have not run jobs on lathe job was cancelled Buyer to arrange shipping. We will load to your semi for you. Dimensions 177"L x 64" W x 77" T Wt 10.000 lbs. ecification Description Max Swing over Bed, 24" Swing Over Cross Slide, 14.5" Centers, 80" Spindle Bore, 3.15" Spindle speeds, 40- 1800 RPM, Spindle HP, 20 HP, Chuck Size, 12" 3 Jaw, Tool Turret, Sauter Disc Type
ID# 90216 Machine Specifications: Max Machining Length. 7 7/8" Max Turning Diameter. 4 3/4" ID of Draw Tube. 1.47" Spindle Nose. Flat. Spindle Speeds. 170- 5.000 RPM. Spindle Motor. 10 HP. X-Axis Travel. 3 7/8" Z-Axis Travel. 11 3/8" Turret Positions. 6. Equipped With: Fanuc 3T Control. Collet Chuck. Chip Conveyor. Machine Dimensions(Approx) 59"L) x 100" W) x 67"H) Machine Weight(Approx) 5.290 lbs Machine Location: MI. USA Additional Information: Machine can not be seen under power. Description: Machine has a turret switch problem and is not running for that reason. Buyer is responsible for removal. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer ... moreis responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Buyer is responsible for removal. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Jason Sanda at 847-497-9800 for any questions and for payment detail.
We are selling this Hardinge HNC CNC Turret Lathe. It has been upgraded to a Yasnec Control. It has been disconnected from power and sitting for about a month, but was running fine before that. I am selling for about what it is worth in scrap, but it's a nice machine. This machine is located in North Carolina. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions Machine is being sold as is. Where is.