|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Use Mytee’s 3601 System Maintainer weekly formaximum performance and pressure and to prolong the life of your machine. The Mytee Lite™ features 8070 Mytee-Lite™ ... moreCarpet Extractor. 1,000-watt in-line heater which produces hot water to quicklybreak up grease and dirt.
Buy It Now
$299.00 Shipping Condition: New Location: China 3900W Water Drilling Machine Diamond Drilling Tool High-quality Engineering Drilling Machine 220V 600r/min Max.260MM. Power: 3900W. Installation, communication, ... moreengineering quality inspection and other industries.
Buy It Now
$335.00 Shipping Condition: New Location: China Installation, communication, engineering quality inspection and other industries. This product has the characteristics of low noise, high power, long ... morelife and high precision. Model: Z1Z-CF-260. Weight: 24kg.
Buy It Now
$310.00 Shipping Condition: New Location: China T his product has the characteristics of low noise, high power, long life and high precision. Installation, communication, engineering quality inspection ... moreand other industries. Power: 3900W. Model: Z1Z-CF-260.
Buy It Now
Condition: New Location: Piscataway, United States BRIDGEPORT GRAY COLOR. FITS BRIDGEPORT & MOST TAIWANESE IMPORTS. Machine Can Run on Single or Three. MATCH HOLE PATTERN TO PHOTO ABOVE. 10 Great Reasons ... moreto Go E-Mill. C.N.C. Vector Type A.C. Frequency Drive.
Buy It Now
$6.49 Shipping Condition: New Location: Grand Forks, United States We understand that when you need a tool, you need it now. Over 70 years of Industry Experience. We may not have all the answers, but we'll do our best ... moreto get you an answer. Our call center is available for expert advice.
Buy It Now
Free Shipping Condition: New – Open box Location: Tupelo, United States Part # 1719641 (updates to 810171441). They will fit Manitowoc 16000 & 18000’s and #59 Luffing Jibs. Takes 1” wire rope.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Use Mytee’s 3601 System Maintainer weekly formaximum performance and pressure and to prolong the life of your machine. The Mytee Lite™ features 8070 Mytee-Lite™ ... moreCarpet Extractor. Citrus Slam is a concentrated, heavy-duty, high-pH carpet cleaning pre-spray.
Buy It Now
$6.49 Shipping Condition: New Location: Grand Forks, United States Milwaukee Eye & Eye Nylon Web Sling 4 In. We understand that when you need a tool, you need it now. Over 70 years of Industry Experience. We may not have ... moreall the answers, but we'll do our best to get you an answer.
Buy It Now
Condition: Used Location: Bothell, United States Integrated fork lift channels for easy loading and unloading. Full set of LifeLine AGM Zero Maintenace batteries. - Adjustable parking brake.
Buy It Now
Free Shipping Condition: New Location: Goleta, United States MODEL #: 600DB. MR. DEBURR. VIBRATORY TUMBLER. DO OUR BEST TO BEAT THE PRICE. FINISHING MACHINE. Motor: 3 HP, Three phase, 220 volts @ 60 hertz or 440 ... morevolts @ 60 hertz. Included with this machine, but not pictured, is a complete fluid system, sound reduction lid and anchor bolts.
Buy It Now
Condition: Seller refurbished Location: Cleveland, United States Replaceable bolt on skid shoes made of 1/2" AR400 wear plate. Hydraulic Brake (Can stop in 20 seconds). Dust seals and wire cutters keep debris out of ... morethe machine bearings.
Buy It Now
Free Shipping Condition: New Location: United States Red Devil 4100 Professional Series Wall Scraper 3in 4109 - Sold as 1 Each. Red Devil Professional Series 4100 Stiff Putty Knife, 3" Blade. Red Devil Putty ... moreKnife is precision ground and has rust-resistant lacquered steel blade that extends through handle for flexibility and long life.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Use Mytee’s 3601 System Maintainer weekly formaximum performance and pressure and to prolong the life of your machine. The Mytee Lite™ features 8070 Mytee-Lite™ ... moreCarpet Extractor. 4 gallon (approx.).
Buy It Now
Condition: New Location: Live Oak, United States The photographs and any video shown are of the actual item (unless otherwise noted). We take pride in the products and services we provide.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States The Powerbuilt Unijack is the world's first and only portable jack designed to safely lift and hold both regular and unibody cars and trucks. But with ... morea conventional jack, it’s challenging to properly lift and hold a unibody vehicle, because once the vehicle is raised with a jack, there’s no space left to add a jackstand.
Buy It Now
Free Shipping Condition: New Location: Milwaukee, United States Flat face hydraulic couplers with 1/2" NPT thread+ 1/2 body. Our Hydraulic Quick Connect Couplers are designed with improved flow performance and maximum ... moreservice life, ensuring smooth and efficient operation.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States "S" Hooks on Both Ends. Hooks are Crimped to Prevent Loss. 15" from Center to Center Hole (Eye-to-Eye) of Strap. Heavy Duty Natural Black Rubber (Not ... moreSynthetic EPDM). Made FromNATURAL RUBBER, NOT Stiff Synthetic EPDM, For Better Quality & Longer Life.
Buy It Now
$335.00 Shipping Condition: New Location: China Installation, communication, engineering quality inspection and other industries. This product has the characteristics of low noise, high power, long ... morelife and high precision. Model: Z1Z-CF-260. Weight: 24kg.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Tongue weight. On top, the dolly features a 1-7/8" hitch ball that will fit most trailer couplers. The whole unit is powder coated to resist rust and ... morecorrosion and built to last many seasons of trailer moving.
Buy It Now
$310.00 Shipping Condition: New Location: China 3900W Water Drilling Machine Diamond Drilling Tool High-quality Engineering Drilling Machine 220V 600r/min Max.260MM. Power: 3900W. Installation, communication, ... moreengineering quality inspection and other industries.
Buy It Now
$335.00 Shipping Condition: New Location: China Installation, communication, engineering quality inspection and other industries. This product has the characteristics of low noise, high power, long ... morelife and high precision. Model: Z1Z-CF-260.
Buy It Now
Condition: New Location: Lakeland, United States The trailer is a 2019 Freedom V- NOSE 36' triple axle all wheel electric brakes "Dexter"5,200 LB torsion axles with 5,200 LB capacity each axle. It has ... morea total capacity of 15,600 LB's. Gross weight of trailer dry is 5,200 LB's.
Buy It Now
Condition: New Location: Los Angeles, United States Use Mytee’s 3601 System Maintainer weekly formaximum performance and pressure and to prolong the life of your machine. The Mytee Lite™ features 8070 Mytee-Lite™ ... moreCarpet Extractor. Citrus Slam is a concentrated, heavy-duty, high-pH carpet cleaning pre-spray.
|
|
|
|
2000 GILDEMEISTER GM 67 CNC SCREW MACHINE LIVE TOOLS LOADED
Specifications Notes Machine basic datas CNC multi-spindle turning center for bar work Manufacturer Gital Year of manufacturing 2000 within tolerance and working Control Name Sinumerik 840C Manufacturer Siemens Kind/Type CNC control Detail description Technical details Drum Number of spindles 3 Spindle bore max. 65 mm Distance between centers of spindles 369.5 mm Power of the spindles at 100% duty cycle 9 kW Power of the spindles at 40% duty cycle 13.5 kW Spindle speed-3000 rpm Miscellaneous Colour Floor space/Weight Dimensions(L x W x H) 9.25 x 1,94 x 2,53 m Weight approx. 20000 Kg Equipment Chip conveyor Counter spindle Clamping chuck diameter max. 175 mm Torque(100%ED)114 Nm Torque(40%ED) 172 Nm Spindle speed: 3000 U/min Longitudinal stroke: 920 mm Rapid traverse Z-Axis: 20 m/min Compound slide Transverse travel X1 und X2: 155 mm Transverse ... moretravel X3: 180 mm Transverse travel Z1 und Z2: 565 mm Transverse travel Z3: 580 mm Rapid traverse X-Axis Slide 1. 2, 3: 15 m/min Rapid traverse Z-Axis Slide 1. 2, 3: 20 m/min 5. Make R"ohm, incl. connecting elements Front slide Quantity: 2 Radial stroke X: 110 mm Longitudinal stroke Z: 565 mm Rapid traverse X: 15 m/min Rapid traverse Z: 20 m/min Turret mounted on compound slide Number of tool stations: 12 Shank diametre according to DIN 69880: 30 mm Tool holder mounted on front slide Number of tool stations: 2 Shank diametre according to DIN 69880: 30 mm Tool carrier w. index. turret f. slide pos. 1 Tool carrier with hydraulic indexing turret for front slide position 1 with 2 toolholders VDI 30 instead of tool carrier Tool carrier w. index. turret f. slide pos. 2 Addt'l cost for frontal slide with 2 pos. revolver with VDI 30 holder in pos.2 Drive for rotating tools. Turret 1 Drive for revolver pos.1 drive capacity 4 KW by power rate 5000 rpm max. speed: 6000 rpm max driven tools: 12 Drive for rotating tools. Turret 2 Drive for revolver pos.2 drive capacity 4 KW by power rate 5000 rpm max. speed: 6000 rpm max driven tools: 12 Drive for rotating tools. Turret 3 Drive
|
|
|
2007 DMG Sprint 65-3 Linear CNC Lathe 3 turrets Live Tools
2007 DMG Sprint 65-3 Linear CNC Lathe Max. Bar Diameter: 2.8" 3.5" Chuck Diameter: 6.9" Spindle Nose: 5.5" Max. Rotational Speed: 5.000 RPM Power(S6: 25% S1) Siemens: 32.2/ 29.5 HP Counter Spindle: Max. Bar Diameter: 1.8" Chuck Diameter: 6.9" Spindle Nose: 5.5" Max. Rotational Speed: 5.000 RPM Power(S3 25% S1) Siemens: 33.5/ 22.8 HP Axes: Max. Rapid Traverse of Axes: 1181.1 IPM Max. Axes Acceleration: 196.9 IPS Path X1: 6.5" Path Z1: 8.7" Path X2: 6.5" Path Z2: 5.9" Path X3: 6.5" Linear) Path Y3: 3.1" 2.0" +1.2" Path Z3: 25.6" Path W2: 27.2" Turret: Number of Turrets: 3 Tool Stations per Turret: 12 Driven Stations: 12 Diameter of the Tool Holder(DIN 69880) 30 Max. Rotational Speed of Driven Tools: 4000 RPM Power(S3 25% S1) 7.4/ 3.4 HP General: Weight: 22.928 ... moreLbs Equipped With: Siemens 840D Control IEMCA VIP 80r E-11 Bar Loader(6 foot) Spindle Liner Software for tool life monitoring only for CNC Artis Chipblaster High Pressure Pump Powertools Software Chiller for the coolant Assorted Tooling(Original cost- $145.000) Schunk Chuck(high precision) Chip Conveyor Comments: It has been lightly utilized and has primarily been machining aluminum since new. New replacement cost($340.000) plus tooling($145,000) = $485,000 Machine On Hours- 4852 Machine Working Hours- 1646. Price: $259.500 FOB Truck Pennsylvania Thank you, Maury Cohn 5 attachments— Share all images DMG Sprint 65-3 Linear CNC Lathe 01.jpg 30K Share DMG Sprint 65-3 Linear CNC Lathe 03.jpg 28K Share DMG Sprint 65-3 Linear CNC Lathe 08.jpg 40K Share DMG Sprint 65-3 Linear CNC Lathe 11.jpg 49K Share DMG Sprint 65-3 Linear CNC Lathe 16.jpg 38K Share 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f126d3438-0x102-
|
|
|
Hardinge Conquest T42 CNC Turning Center with Live Tools and Subspindle
Hardinge Conquest T42 CNC Turning Center Live Tools- sub-spindle New 1996 General Specifications As Per Brochure(please verify details) SPECIFICATIONS: CNC Control. Fanuc 0T Spindle configuration. A2-5" 16C Round collet capacity. 1.625" 42 mm AC digital drive system.10 hp Speed range. 50-5000 rpm Max swing over upper way cover. 19.5" Max swing over lower way cover. 14.5" X-axis travel. 5.43" Z-axis travel. 13.62" X-axis rapid traverse rate. 472 ipm Z-axis rapid traverse rate. 630 ipm Bi-directional vertical turret. 12 stations(6 live) Rotary tool motor. 1.2 hp Subspindle speed. up to 3000 RPM Approx machine weight. 9.800 lbs Approx machine dimensions. 93" x 70" x 67" Equipped with: 16C collet chuck on main spindle Parts catcher Misc. OD/ID Tool holders(1) SG54 Endworking Live Holder Please contact ... moreBrandon for more details 303-651-6545
|
|
|
Hardinge Talent 6/45 CNC Turning Center Live Tools Full C Axis
HARDINGE TALENT 6/45 CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 2003 MAXIMUM SWING 18" MAXIMUM TURNING DIAMETER 11.1" MAXIMUM PART LENGTH 15" X AXIS TRAVEL 9" Z AXIS TRAVEL 16" C AXIS MINIMUM INCREMENT 0.001º RAPID TRAVERSE RATE X AXIS 1181 IPM RAPID TRAVERSE RATE Z AXIS 1181 IPM SPINDLE NOSE A2-5 BAR CAPACITY 1.75" SPINDLE SPEEDS 60- 6.000 RPM SPINDLE MOTOR 15 HP TURRET CAPACITY 12 STATIONS LIVE TOOL MOTOR 5 HP LIVE TOOL SPEEDS 5.000 RPM TAILSTOCK BODY TRAVEL 13.42" TAILSTOCK TAPER MT#4 APPROX. DIMENSIONS 80" x 65" x 69" MACHINE WEIGHT(APPROX) 6.500 LBS EQUIPPED WITH: FANUC 0iTC CNC CONTROL WITH 9" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION FULL C AXIS CONTOURING WITH LIVE TOOLING 1MB P ROG RAM MEMORY. FLASH MEMORY CARD SLOT CUSTOM MACRO B. 120 TOOL ... moreOFFSETS, FLOPPY DRIVE 6" 3-JAW HYDRAULIC THROUGH HOLE CHUCK W/JAWS STANDARD COOLANT SYSTEM. ALL AVAILABLE MANUALS AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE ON OUR WAREHOUSE FLOOR IN KENOSHA. WISCONSIN ZIP CODE 53144. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com
|
|
|
Hardinge Talent 8/52 CNC Turning Center with Live Tools
HARDINGE TALENT 8/52 CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 2005 MAXIMUM SWING OVER WAY COVER 18" MAXIMUM TURNING DIAMETER 11.1" MAXIMUM TURNING LENGTH 15" X AXIS TRAVEL 9" Z AXIS TRAVEL(W/ COLL ET) 16" C AXIS INCREMENTS 0.001º RAPID TRAVERSE RATE X& Z AXES 1181 IPM SPINDLE NOSE A2-6 MAX. BAR CAPACITY 2.0" SPINDLE SPEEDS 100-5.000 RPM SPINDLE MOTOR 15 HP TURRET CAPACITY 12 STATIONS TURRET INDEX TIME(1 STATION) 0.78 SECONDS LIVE TOOLING SPEEDS 5.000 RPM LIVE TOOLING MOTOR 5 HP TAILSTOCK TAPER MT#4 TAILSTOCK BASE TRAVEL 13.42" APPROX. DIMENSIONS 75" x 65" x 69" MACHINE WEIGHT(APPROX) 6.200 LBS EQUIPPED WITH: FANUC OiTC CNC CONTROL WITH 10" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION RIGID TAPPING(SYCHRONIZED/ SOLID TAPPING) 8" 3-JAW HYDRAULIC ... moreTHROUGH HOLE CHUCK W/JAWS AUTO PARTS CATCHER. FULL CONTOURING C AXIS ALL AVAILABLE TOOLING. ALL AVAILABLE MANUALS AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE ON OUR WAREHOUSE FLOOR IN KENOSHA. WISCONSIN ZIP CODE 53144. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and
|
|
|
Okuma LR10-M - 5 Axis CNC Turning Center CNC Live Tools
Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Normal 0 false false false MicrosoftInternetExplorer4 Okuma LR10-M T-2S X 200 5 Axis CNC Turning Center Serial# 0358 Year 1993 Great Condition Specifications: Control OSP 5020 Full Model Number: LR10-M Swing Over Bed: 17.32" Swing Over Carriage: 11.02" Swing Over Cross Slide: 9.06" Max Turn Diameter: 6.69" Max Turn Length: 7.87" Spindle Thru Hole: 3.15" Spindle Motor: 10 HP Spindle Speed: 15-6.000 RPM Number of Tools(Upper Turret) 12 Number of Tools(Lower Turret) 8 Live Tool Speed: 100-6.000 RPM Machine Dimensions: 128"L x 73"W x 65"H Machine Weight: 9.500 LBS Chip Conveyor Full C Axis(2) Turrets Lots Of Tooling Live tool holders. Qty. 9) 90 degree tool holders. Qty. 3) Boring bar holders. ... moreQty. 14) ER-25 collet holders. Qty. 3) T urning tool holders. ¾ square, qty. 16) Turret plugs(when live tooling is not used) qty. 9) PRICE… $29.970.00 For More Information Please Call Maury Cohn 1 800 888 4312
|
|
|
1995 MAZAK INTEGREX 30Y CNC LATHE w/20 TOOL ATC, LIVE TOOLS, 12" Chk
THIS IS A VERY NICE TIGHT MACHINE THAT IS WORKING DAILY IN MY SHOP. I AM NOT A BROKER OR LIQUIDATION COMPANY THAT HAS NO REAL HISTORY ON THE MACHINE BEING SOLD. THIS MACHINE IS IN TOP SHAPE AND YOU CAN COME RUN IT OR I CAN RUN SOME PARTS FOR YOU BEFORE BIDDING OR BUYING. IF YOU ARE NEW TO THESE CNC MACHINES I CAN GO OVER THE BASIC OPERATION WITH YOU TO GET YOU STARTED. I HAVE A LOT OF TOOLING, TOOLS, INSERTS, ETC. THAT GO WITH IT. DRILLS, BORING BARS, SLOTTERS, CUTTERS, ETC) MAZAK INTEGREX 30Y/1000 CNC LATHE. NEW: 1995 SPECIFICATIONS: CHUCK SIZE. 12" HYD. CHUCK MAX. SWING/ OVER CARRIAGE. 20" 15.75" MAX. CUTTING DIA.LENGTH. 20" 40" TRAVEL X-AXIS. 17.75" TRAVEL Y-AXIS. +/ 3.5" TRAVEL Z-AXIS. 40.5" SPINDLE NOSE/BORE. A2-8/ 2.50" SPINDLE SPEED. 35- 3.500 RPM SPINDLE HP CONT/ 30 MIN. AC 35/30 HP ROTARY ... moreTOOL SPINDLE NOSE. 40 TAPER ROTARY TOOL SPINDLE SPEED. 15-6000 RPM ROTARY TOOL SPINDLE HP. AC 10 HP RAPID TRAVERSE X/Y/Z. 393/ 472/ 708 IPM MAGAZINE CAPACITY. 20 POSITION ATC MACHINE DIMENSIONS. 216"x89"x120" MACHINE WEIGHT. 14.330 LBS EQUIPPED WITH: MAZATROL T-PLUS- TOOLEYE- 12" 3-JAW HYD. CHUCK- 20 POSITION TOOL CHANGER- TAILSTOCK- CHIP CONVEYOR- MANY TOOLHOLDERS TOOLS INSERTS AND MANUALS DO NOT TRY TO MAKE PAYMENT UNTIL YOU TALK TO ME FIRST.
|
|
|
Miyano BND-34S-2 CNC turning Center Live Tools Sub Spindle Parts Catcher
MIYANO BND-34S-2 CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 1993 BAR CAPACITY 1 5/16" MAX TURNING DIAMETER 4 3/4" MAX WORK LENGTH BAR/CHUCKING 7 7/8"4 7/8" X AXIS TRAVEL 5.50" Z AXIS TRAVEL 8.25" RAPID TRAVERSE ALL AXES 472 IPM MAIN SPINDLE SPEED 170- 5.000 RPM MAIN SPINDLE MOTOR 10 HP SUB SPINDLE SPEED 170- 5.000 RPM SUB SPINDLE MOTOR 3 HP MAX B AXIS SLIDE STROKE 12.75" TURRET CAPACITY 8 POSITIONS NUMBER OF LIVE TOOLS 4 LIVE TOOL SPEED 150-4.500 RPM APPROX. DIMENSION(W/O BARFEED) 96 X 65 X 70" APPROX. WEIGHT 8.000 LBS EQUIPPED WITH: FANUC OTC CNC C ONTR OL 9" SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 5.00" CHUCK MAIN SPINDLE. 4.00" CHUCK SUB SPINDLE MIYANO SINGLE TUBE BARFEEDER WITH REDUCERS PROGRAMMABLE PARTS CATCHER. 7.5 DEGREE POSITIONING SUB SPINDLE SYCHRONIZATION ... moreFOR SECONDARY WORK STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE MANUALS AND TOOLING ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER IN KENOSHA, WISCONSIN LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further
|
|
|
2006 NAKAMURA-TOME WT-250 MULTI-AXIS CNC LATHE. FANUC 18iTB, C AXIS & LIVE TOOLS
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 2006 NAKAMURA-TOME WT-250 MULTI-AXIS CNC LATHE. FANUC 18iTB. C AXIS& LIVE TOOLS Ref# 152271 iammdna XCNCTC NAKAMURA-TOME WT-250 MULTI-AXIS CNC TURNING CENTER. NEW: 2006. SPECIFICATIONS: SWING OVER ... moreBED. 9.84" SWING OVER CARRIAGE. 9.84" MAX. TURNING LENGTH. 21.85" MAX. BAR CAPACITY. LEFT SPINDLE. 2.56" MAX. BAR CAPACITY. RIGHT SPINDLE. 2.01" AXIS TRAVEL. X1& X2. 7.68" AXIS TRAVEL. Z1& Z2. 23.62" SPINDLE SPEED. LEFT. 4500 RPM. SPINDLE NOSE. A2-6. HOLE THRU SPINDLE. 3.15" SPINDLE SPEED. RIGHT. 4500 RPM. SPINDLE NOSE. A2-5. HOLE THRU SPINDLE. 2.48" C-AXIS INDEXING. BOTH SPINDLES. 0.001 DEGREE. NUMBER OF TURRET HEADS. 2. TURRET HEAD TYPE. DODECAGON. NO. OF TOOL STATIONS. 12. TOOL SIZE. 1" ID TURNING TOOL. 1.26" ROTARY TOOL SPINDLE SPEED. 30 TO 3600 RPM. SPINDLE DRIVE MOTOR. LEFT. 25/20 HP. SPINDLE DRIVE MOTOR. RIGHT. 15/10 HP. ROTARY TOOL DRIVE MOTOR. 7.5/5 HP. APPROX. MACHINE WEIGHT. 18.000 LBS. EQUIPPED WITH: FANUC 18iTB CNC CONTROL. COLLET CHUCKS ON LEFT AND RIGHT SPINDLES. 12 STATION UPPER AND 12 STATION LOWE
|
|
|
Job lot of lathe cutting tools for model engineering or live steam by Wickman
Job lot of lathe cutting tools for model engineering or live steam by Wickman. There are lots of various sizes. They have some rust. Some of them are by Wickman. Postage discounts for multiple purchases. Click on photos to enlarge.
|
|
|
Doosan Lynx 220 LM CNC Turning Center Live Tools Fanuc 21iTB Control Parts Catch
DOOSAN LYNX 220LM CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 2007 DATE OF INSTALLATION 2010 SWING OVER BED 20.08" SWING OVER SADDLE 11.42" MAX. TURNING DIAMETER 9.84" MAX TURNING LENGTH 20" X AXIS TRAVEL 6.9" Z AXIS TRAVEL 21.6" C AXIS INCREMENTS 0.001º RAPID TRAVERSE RATE X AXIS 1181 IPM RAPID TRAVERSE RATE Z AXIS 1417 IPM SPINDLE NOSE A2-6 SPINDLE SPEEDS 60- 6.000 RPM SPINDLE MOTOR 20 HP SPNDLE BORE 2.4" MAX. BAR CAPACITY 2.0" TURRET CAPACITY 24 STATIONS TURRET INDEX TIME(1 STATION) 0.15" LIVE TOOLING MOTOR 5 HP LIVE TOOLING SPEEDS 60- 6.000 RPM TAILSTOCK QUILL TAPER/DIAMETER MT#4/ 2.53" TAILSTOCK QUILL TRAVEL 3.15" APPROX. DIMENSIONS 140" x 64" x 65" MACHINE WEIGHT(APPROX) 8.900 LBS EQUIPPED WITH: FANUC OiT CNC CONTROL WITH 10.4" LCD SCREEN ... moreRS-232C PORT INTERFACE FOR DNC OPEATION 8" 3-JAW HYDRAULIC CHUCK WITH SOFT JAWS AUTO PARTS CATCHER. TOOL EYE/PRESETTER RIGHT SIDE DISCHARGE LIFT-UP CHIP CONVEYOR STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED SPLASH GUARDING& ENCLOSURES ALL AVAILABLE MANUALS. ALL AVAILABLE TOOLING*APPROXIMATELY 1100 TOTAL CUT HOURS OF USE* SHOWROOM MACHINE RUNNING DEMOS UNTIL 2010* COLLET CHUCK IN PHOTOS NOT INCLUDED. CHUCK ONLY* AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANU
|
|
|
Tsugami S16D Swiss Type CNC Lathe New 1992 - Live tools, sub, bar feed, Fanuc
We are pleased to offer the following for your consideration. Please advise of any interest or questions. Pictures attached. THREE AVAILABLE 1992. 1992, 1995(1995 machine has Iemca magazine bar loader- price on request) Tsugami S16D Swiss Type CNC Lathe(used) New 1992 Equipped with: Fanuc 0T control.630” dia x 8” length capacity 5 axis plus 5 deg. main spindle indexing(X. Z, B, T1, T2) 8000 rpm main spindle 4000 rpm sub spindle 5 turning stations 3 live cross mill stations 3 end working stations 3 rear end working stations LNS Super Hydrobar Singel Bar feed system for 12' bars Machine ran oil and made precision medical parts. Machine is just coming out of production having run oil and being well maintained. TERMS& CONDITIONS: Unless otherwise arranged. Machines are sold"as is, where is" with payment due in certified funds. ... moreIn full, prior to shipment. Prices quoted are subject to change without notice and are exclusive of taxes. Duties, shipping and handling. This quote is for immediate acceptance since all items are subject to prior sale or disposition. We reserve the right to correct any errors or omissions. Specifications and pictures are intended as guidelines only and are not binding. Your on-site inspection is recommended prior to purchase to confirm and verify specific details. Ask for our terms and conditions of sale if not attached. We broker machinery offering manufacturers a wide variety of used turning machines. We are specialists in automatic screw machines. Rotary transfers, CNC lathes, CNC swiss, bar loaders and machining centers. We find quality machines to buy that specifically match your requirements and sell machines that may be surplus to your current operation. Whether selling or buying, we can assist with all of your used machinery needs. CLICK HERE FOR OTHER MACHINES& BAR LOADERS: IAMMDNA Citizen. Star, Tsugami, Tornos, Hanwha, KSI, Nextrun, Ganesh, Nomura, Esco, Bechler.
|
|
|
Wasino A-12 CNC Turning Center Live Tools Gantry Robot Load/Unload System
WASINO A-12 CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 9/1998 X AXIS TRAVEL 5.5" Y AXIS TRAVEL 3.9" Z AXIS TRAVEL 9.854" C AXIS MIN INCREMENT 0.001º RAPID TRAVERSE RATE X AXIS 630 IPM RAPID TRAVERSE RATE Y AXIS 236 IPM RAPID TRAVERSE RATE Z AXIS 787 IPM SPINDLE NOSE/ SPINDLE BORE A2-6/ 2.12" SPINDLE MOTOR 7.5 HP SPINDLE SPEED 4.000 RPM TURRET CAPACITY(ALL LIVE CAPABLE) 12 STATIONS RADIAL TOOL MILLING SPEEDS 10000 RPM AXIAL TOOL MILLING SPEEDS 5000 RPM MILLING SPINDLE MOTOR 5 HP S-ROBO 1 LOADER SYSTEM: IDEAL WORK DIAMETER 6.0" IDEAL WORK WEIGHT 6.6 LBS APPROX LOAD/UNLOAD TIME 6.0 SECONDS MACHINE WEIGHT(APPROX) 5500 LBS EQUIPPED WITH: FANUC 21iT CNC CONTROL WITH 10.4" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 6" HYDRAULIC 3-JAW THROUGH HOLE CHUCK W/JAWS S-ROBO 1 GANTRY ROBOTIC ... moreLOAD/UNLOAD SYSTEM ROTARY PARTS STOCKER. PARTS OFFLOAD CONVEYOR TURN OVER STATION(FLIP PARTS FOR 2 SIDED TURNING) LIVE MILLING WITH C AXIS& Y AXIS OFFSET MILLING ALL AVAILABLE LIVE MILLING AXIAL& RADIAL HOLDERS ALL AVAILABLE TURNING TOOL HOLDERS& WEDGES REAR DISCHARGE LINK BELT TYPE CHIP CONVEYOR FULLY ENCLOSED GUARDING. ALL AVAILABLE MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER IN KENOSHA, WISCONSIN LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE. PLEASE PROVIDE US WITH YOUR ZIP CODE. AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR S
|
|
 |