In 
 
Order by: 
Available to: 
Price: 
 - 
$
1192.49
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
MFR: VAN MARK PRODUCTS WEIGHT: 94 LB MODEL: T1050 SKU: 744873 SHIPPING NOTICE: Due to the size and weight of this item. A specialized carrier will be ... moreutilized, and will need to schedule a delivery for this item. The carrier will contact you directly when your order arrives in your area to schedule a convenient delivery date and time. Please include your daytime phone number in the shipping information at the time of check out. The carrier will deliver your order to the first available entrance of the delivery address that is accessible by the truck carrying your goods, so please make proper arrangements to accept this delivery, and bring it into your home. You must have the ability to move your items at the time of delivery. Drivers do not assist with unpacking, set up or clean up, and cannot bring the order into your home, so make sure you have help available. Upon delivery please inspect your item(s) You will be required to sign a Proof of Delivery receipt. Please note any damage to the item or packaging on the delivery receipt or, if refusing delivery due to damage please note'Refused due to damage' on this receipt, get the order tracking number, then contact us. Product Features: Scoring pocket eliminates knife damage to hinge components, Rigid“I” beam base rails ensure brake stays in calibration, Full loop handle provides uniform bending along entire piece, Material stops allow repeat bending without re-measuring, Brake has a 3/8” x 13” throat and vinyl strip for protecting material, Perfect for maintenance crews and management companies, Short Description: Aluminum Siding Brake. Used To Trim Out Residential Windows, Door Sidings, Roofing, 027 Aluminum& 26 Gauge Galvanized Steel. Please Note: We try very hard to present accurate product images. But product changes occur constantly. All images should be considered approximations. If a particular product feature, color or characteristic is especially important, please contact us to verify that information before placing your order. Product Overview
$
1150.00
Buy It Now
Condition: Used
Location: Wilmington, United States
Chicago 818 sheet metal brake.It has some extra bending dies show resting in the brake from an end view. I have never used them. I always used the angle ... morebar attachment that is shown installed. The right handle was broke off and welded back on many years before I bought it. It all works fine. This item is for sale locally I reserve the right to end auction early. Immediate non refundable deposit thru paypal of $100.00. Remaining balance to be paid in cash at time of pick up. Please ask questions. Brake weights approx 1500 lbs. Local pick up only. I have a gantry crane that can be used to help load on to your open trailer.
$
1025.00
16h 54m 55s
6 bids
$200.00 Shipping
Condition: New – Open box
Location: Liberal, United States
Di Arco Pipe Bender No. 6 Opened, never used. All parts present..
$
73.99
Buy It Now
Free Shipping
Condition: New
Location: Aurora, United States
BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO? Air Tools? Air Riveters? Air Saws& Blades? Compressors& Tanks? Grease Guns? Grinders& ... moreGinding Discs? Hammers. Drills& Screwdrivers? Hopper Texture Guns? Hoses. Reels& Accessories? Nail Guns& Nails? Paint& Spray Guns? Punch Flange Tools? Sand Blasters? Sanders? Sockets. Ratchets& Impacts? Automotive? Accessory Lights? Air Compressors& Portables? Air Horns? Auto Body& Frame? Auto Maintenance& Care? Diagnostic Tools? Electrical. Wiring& Testers? Jacks. Engine Stands& Hoists? Specialty Tools? Tie Downs? Tires& Wheels? Truck. Trailer& Accessories? Batteries? 12 Volt SLA Batteries? 12AH SLA Batteries? 17 18 20 AH SLA Batteries? 32 33 34 35 AH SLA Batteries? 4 4.5 5 AH SLA Batteries? 7 7.2 7.5 8 AH SLA Batteries? 9 10 AH Batteries? Misc. 12V SLA Batteries? 6 Volt SLA Batteries? 10. 12 AH SLA Batteries? 4. 4.5, 5 AH SLA Batteries? APC Computer Back Up Batteries? Motorcycle Batteries? 12N12A-4A-1? 12N12A-4A-1 AGM? 12N14-3A? 12N7-3B? 12N9-4B-1? 12N9-4B-1 AGM? 6N2-2A? 6N2A-2C? 6N4-2A? 6N4B-2A? 6N5.5-1D? 6N6-1B? 6N6-3B? 6N6-3B-1? B54-6? YIX30L? YT12B-BS YT12B-4? YT14B-BS YT14B-4? YT7B-BS YT7B-4? YT9B-BS YT9B-4? YTX12-BS? YTX12A-BS? YTX14-BS? YTX14AH-BS? YTX14AHL-BS? YTX14L-BS? YTX16-BS-1? YTX20-BS? YTX20L-BS? YTX24HL-BS? YTX4L-BS? YTX5L-BS? YTX7A-BS? YTX7L-BS? YTX9-BS? YTZ10S? YTZ12S? YTZ14S? YTZ7S? NiCd Batteries? AA NiCd Button Top Cells? Sub C NiCd Cells w/Tabs? Optima Blue Top Batteries? Optima Red Top Batteries? Optima Yellow Top Batteries? Other Batteries? Power Wheel Batteries? Replacement for GREEN Battery? Replacement for RED Battery? Replacement Dewalt Batteries? 12 Volt Dewalt Replacements? 14.4 Volt Dewalt Replacements? 18 Volt Dewalt Replacements? 24 Volt Dewalt Replacements? 9.6 Volt Dewalt Replacements? Replacement Lincoln Batteries? 12 Volt Lincoln R
$
599.99
Buy It Now
$79.99 Shipping
Condition: Used
Location: Lombard, United States
Diacro 1-A Bender, Di-acro 1-A Rotary Bender. Used condition with dings and scratches. Normal wear from use. Overall nice shape. Please see photos for ... moredetails. Thanks for looking Shipping price to the lower 48 only
$
1995.00
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Van Mark TM10 Aluminum Siding Brake FREE COMMERCIAL SHIPPING- More Shipping Info Below Trim Master Bending Capacities Recommended: Trim Coil. Aluminum: ... moreRec. 024- Max.040• Gutter Coil: Rec. 024- Max.024• Galv. Grade D: Rec. 28 ga. Max 24 ga. Galv. Grade E: Call Plant• Copper. 1/4 Hard: Rec. 16 oz. Max 20 oz. POWERslot™: New technology adds more bending power without sacrificing capacities. 1-3/4" x 14" Throat Depth: For complex custom bends. Quick Hemming: Easily makes 180 degree over bends. Built-In-Tape Rule: Standard/Metric scale takes the guess work out of your bending routine. Large Working Pocket: For complex custom bends without brake interference. Vinyl Strip: Does not mar metal finishes while providing cushioned contact during bends. Still Adjustable: You may never have to adjust your brake. But if you want to, that option is up to you! Full Loop Handle: Ergonomic and Easy to grab. Ensures even bending. Detaches quickly for transport. FREIGHT TERMS FOR FREE COMMERCIAL SHIPPING ON ALL VAN MARK SIDING BRAKES: 1. Free Shipping applies to a Commercial Delivery Address w/ Semi Truck Access(Loading Dock or Fork Lift Access) 2. This also includes Customer Pick-Up at the Common Carriers Trucking Terminal. 3. For Residential Delivery Address there will be a extra charge based on location. 4. A daytime telephone number must be supplied for all orders shipping Common Carrier. Bird Ladder& Equipment Co. Inc. 800-776-3595
$
2200.00
Buy It Now
Condition: Used
Location: Nogales, United States
ROPER WHITNEY PEXTO 416A SLIP ROLLER! UNIT IS ON A STEEL BASE. We have, however, described each item to the best of our abilities. If you do not like ... morewhat you see, that is ok too. GREAT UNIT SOLID USED CONDITION.
$
1925.00
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Van Mark 3015 Trim former bending brake aluminum siding There is some rust on the little wheels Please read these sales terms carefully before bidding! ... moreIf you miss the Auction please contact me and I will relist it for you. I also combine shipping on some things. Auction Policies 1. This item is used and is likely to be several or more years old. Please consider that the description of appearance cannot include each and every flaw, whether evident or undetected. Pics are part of the description so please look carefully and if you need more do not hesitate to ask. The more informed a buyer is the better the e-bay experience so ask questions we really do not mind. 2. Payment: Preferred Payment is Pay Pal. Please contact me or pay for your item within three days. I reserve the right to re-list my items after 4 days if I have had no contact or payment from the winning bidder. 3. Shipping insurance is a option available if desired by purchaser, with it loss or damage liabilities during transit can be mitigated by purchasing Shipping Insurance, as the Seller cannot be held responsible for item loss and/or damage during transit. The cost of initial shipping as well as return shipping is non-refundable. Allow 3 to 12 days after cleared payment to receive your item. 4.OVERSEAS CUSTOMERS PLEASE ASK FOR A SHIPPING QUOTE BEFORE BIDDING WE SHIP TO MANY COUNTRIES BUT NOT ALL.PLEASE DON'T ASK US FOR SEPARATE BILLS FOR CUSTOMS FOR TAX OR WHATEVER REASONS WE ARE HONEST HERE AND ARE NOT INTERESTED IN VIOLATING ANY COUNTRY'S LAWS 5.POSITIVE FEEDBACK IS EXPECTED FROM ALL OF MY PATRONS AND IS ALWAYS GIVEN BY ME AFTER I’VE RECEIVED YOURS.OUR CUSTOMERS ARE VERY IMPORTANT TO US. ANY ISSUES MUST BE DEALT WITH RIGHT AWAY PLEASE DO NOT WAIT AS THIS CAN MAKE RECOVERING MONEY FROM THINGS LIKE INSURANCE FOR DAMAGES ALMOST IMPOSSIBLE. Thank you for reading this.
$
1650.00
Buy It Now
Condition: Used
Location: Yorktown, United States
A couple of the dies have chipped spots but overall in working condition.
$
99.50
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
The surfaces of the tool are heat-treated and hardened to provide a long service life. Flat steel capacity: 1-3/16".
$
480.00
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Effortlessly integrate custom profiles into your trim work. Crown Mold dies & Bead Form dies are optional. Rib dies, included wwith tool, stiffen and ... moreenhance panels. Not compatible with the Van Mark Trim-A-Brake II.
$
950.00
Buy It Now
Condition: Used
Location: Fowler, United States
Up for sale is a 36 inch Niagara Bar Folder. Nice Shape. Local pickup only in Fowler, Ohio Once paid in full I can hold until you can arrange pickup. 
$
1275.00
Buy It Now
Condition: Used
Location: Eliot, United States
LOCAL PICK UP ONLY.
$
31.59
Buy It Now
Free Shipping
Condition: New other (see details)
Location: China
6mm 8mm 10mm Pipe Bending Tool Tube Bender Car Tubing Hose Brake Fuel Line Plier. 180 Degree Pipe Bending Tool Tube Bender Car Tubing Hose Brake Fuel ... moreLine Plier. A strong, sturdy construction allows this Tubing Bender to smoothly bend copper, aluminum, and other thin walled steel tubing without crimping.
$
84.50
Buy It Now
Free Shipping
Condition: New
Location: Mayapuri Shopping Centre S.O, India
Will not bend copper tubing. Made of hardened tool steel Mounts on a workbench or held in a vise. Made of hardened tool steel.
$
31.59
Buy It Now
Free Shipping
Condition: New other (see details)
Location: China
180 Degree Pipe Bending Tool Tube Bender Car Tubing Hose Brake Fuel Line Plier. A strong, sturdy construction allows this Tubing Bender to smoothly bend ... morecopper, aluminum, and other thin walled steel tubing without crimping.
$
899.99
Buy It Now
Condition: Used
Location: Wilmington, United States
It's in good working order. This is for local pickup only .
$
1000.00
Buy It Now
Condition: Used
Location: San Jose, United States
If space is limited and you are in need on a machine that can do variety of function then Baileigh Industrial's MPB-15 universal bender is perfect ... morefor you. This ornamental metal bender offers three machines in one and is capable of scroll bending. Radius bending and angle bending simply by swapping out the tooling. The MPB-15 metal bender has the ability to bend wrought iron, mild steel, aluminum and much more. This isn't just a flat bar bender. Because it can bend rounds, squares, rectangles, or any number of other profiles. The MPB-15 flat bar bender has a mild steel capacity of 5/8" round bar, 19/32" square bar, and 1-3/16" x 5/16" flat bar. This is a great ornamental bender for producing fences, gates, railings and much more. Alaska& Hawaii& International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. Columbus. Ohio. 43204 1-800-543-5998 After purchasing. Pay instantly with your credit card through PayPal!
$
945.00
Buy It Now
Condition: Used
Location: Brookpark, United States
HOSSFELD# 2 INSTRUCTION MANUAL SET FACTORY PRINTED HOSSFELD INSTRUCTION MANUAL 32 pages. FULLY ILLUSTRATED EDITION Full color Hossfeld sales Brochure ... more8 pages with ILLUSTRATIONS OF OPERATIONS of Bender Hossfeld# 2 bender COMPLETE PARTS CATALOG fully ILLUSTRATED EDITION 43 pages Hossfeld# 2 Price sheet showing special USER NET Costing for Benders/ Dies/ Hydraulics 8 pages This is a MUST HAVE SET for any Hossfeld Owner 91 pages total. LIMITED TIME OFFER For a LIMITED TIME we are adding: A 10% DISCOUNT CERTIFICATE GOOD FOR 90 DAYS! This means you will SAVE 10% on all Hossfeld Orders For a LIMITED TIME this auction will INCLUDE your 90 day 10% DISCOUNT CERTIFICATE* Note. We have been a HOSSFELD dealer for the past 40 years! We will help you in your selection of Hossfeld benders/ dies/ parts. When you get your new Hossfeld pack( above Auction) simply e-mail us for any Hossfeld product/s you may need. We have included photos of Manuals/ parts catalogs/ price sheets/ sales brochure* BATAVIA MACHINERY 2881 SUNLINE DR Reno. Nevada 89523 e-mail for more information Website: http:www.bataviamachinery.net We are overstocked on this item.NOW IS YOUR CHANCE TO BUY NOW AND SAVE $$$! See Pictures! FREE SHIPPING! OUR WEBSITE: http:www.bataviamachinery.net OR CALL US TOLL FREE WITH ANY QUESTIONS AT: 1(877) 528-2809
$
143.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
This bender is made of high hardness steel and it is sturdily constructed. 【WIDE APPLICATION】- The lightweight design allows it to be mounted on work ... moretrucks, tractors, or any concrete floor. T he bender can be used to shape steel, iron, wrought iron, brass, copper and aluminum.
$
360.85
Buy It Now
$180.60 Shipping
Condition: New
Location: SHREWSBURY, United Kingdom
The S12 R/T hydraulic press brake has a folding capacity of 305mm (12"). This machine will fold 5mm thick steel up to 100mm, 3mm thick steel up to 200mm ... morewidths and 2mm thick steel for up to 305mm widths.
$
238.95
Buy It Now
Free Shipping
Condition: New
Location: Petersburg, United States
Unclip the white bushing that connects the clutch pedal to the push rod.2. Unbolt the 3 bolts holding the plastic pedal in.4. Either dismantle the entire ... moredash and many parts under the dash to remove the plastic pedal assembly.
$
3250.00
Buy It Now
Condition: Used
Location: Sicklerville, United States
Chicago Model BPC-414-8 Finger Brake. Original Paint. Complete Set Of Fingers.
$
2950.00
Buy It Now
Condition: Used
Location: Pomona, United States
MOTOR. . 1 HORSEPOWER. Used power slip roll in good condition. 3 phase, 220 volt. MODEL. . X5016E. LENGTH OF ROLLS. 50".
$
3199.00
Buy It Now
Condition: Used
Location: West Covina, United States
DREIS & KRUMP CHICAGO 48" x 12ga. BOX & PAN FINGER BRAKE L31. Made in the U.S.A. by Dreis & Krump. This is a uséd Chicago Box & Pan Finger Brake in good ... morecondition. Model #: L31. Maximum Bending Length: 48" Capacity (mild steel): 12 gauge.
$
109.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
30 Inch Sheet Metal Bending Brake Bender Brand New Features: Bends materials up to 17 gauge steel Makes up to 90 degree bends Bends materials up to 30" ... moreWide Designed for Bench Top Mounting Using 4 3/8" Diam. Bolts Dimensions: 34 1/2" x 6" x 2 7/8" Make adjustments quickly using a protractor*California residents only* sales tax will be added at check out. Shipping and Handling Fee to Lower 48 States: FREE SHIPPING Ground Service. No PO box Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller for additional information. Shipping To Canada: $68.88(1st unit) + $54.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area Zip 91733: All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Contact Information: If you have any questions about our product or your purchased order. Please feel free to contact us. We are here to help. We answer our emails everyday. However, we do ask that you allow us 24 hours for a reply. Return Policy: Buyers have 72 hours to inspect item for damages and must contact the seller immediately if shipping damage is discovered. No returns for any reason after that.
$
1395.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
Mild Steel: 16 gauge at Half Width, 18 gauge at Full Width. Soft Copper: 14 gauge. Hard Copper: 15 gauge. Finger Brake Dies: 2" x 5, 3" x 6, 4" x 5. Aluminum: ... more11 gauge. Annealed Phosphor Bronze: 15 gauge.
$
200.00
Buy It Now
$41.72 Shipping
Condition: New
Location: Blue Ball, United States
# 200055 Made In USA! 8” work piece width. Excellent to use as a letter brake or for small aluminum flashing project. It has adjustable clamping tension ... morewith toggle clamp for easy setup and use.
$
31.59
Buy It Now
Free Shipping
Condition: New other (see details)
Location: China
6mm 8mm 10mm Pipe Bending Tool Tube Bender Car Tubing Hose Brake Fuel Line Plier. 180 Degree Pipe Bending Tool Tube Bender Car Tubing Hose Brake Fuel ... moreLine Plier. 1pc Tube Pipe Bender. A strong, sturdy construction allows this Tubing Bender to smoothly bend copper, aluminum, and other thin walled steel tubing without crimping.
$
52.99
Buy It Now
$10.99 Shipping
Condition: New
Location: Fort Mill, United States
Manufacturer: Ironton. This Ironton® 18in. The brake is compact and lightweight yet sturdy enough for professional production runs. The design allows ... morefor a full 90° capacity in steel as thick as 18 gauge.
$
7500.00
Buy It Now
Condition: Seller refurbished
Location: Westlake Village, United States
Bradbury Rollformer Tooling Large Lot of Roll Forming Dies And Mixed Items. (5) Crates of Tooling as shown in photos and several boxes of mixed items ... morefor use with this lot of tooling. Items have been refurbished and are all in very good condition. Will load crates on your truck with forklift. Shipping quotes available by request.
$
31.59
Buy It Now
Free Shipping
Condition: New other (see details)
Location: China
180 Degree Pipe Bending Tool Tube Bender Car Tubing Hose Brake Fuel Line Plier. A strong, sturdy construction allows this Tubing Bender to smoothly bend ... morecopper, aluminum, and other thin walled steel tubing without crimping.
$
480.00
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Up for auction is a Van Mark Trimcutter Model 3017. It has been used only a few times and is still in very good shape. All wheels and cutters roll freely ... moreand do not bind at all. The Van Mark TrimCutter#3017 is used to slit aluminum. Steel and copper for residential siding, roofing, window and gutter installation right on your Van Mark Brake. The TrimCutter rides on the top lock bar of the Mark I, Mark II TrimMaster, Mark IV Industrial and Metal Master Series brakes. Designed to protect Van Mark brakes from potential hinge damage from use of utility knives. The rotary knives make consistent cuts giving factory edges every time. Its unique four point track bearing system and low profile grip ensures the tool does not ride off the tracks. Van Mark makes the strongest, most durable and highest quality jobsite tools in the industry and all of Van Mark's products are manufactured and assembled in the USA. Case hardened knives for durability Four point track bearing system for stability Low profile grip for ease of use and stability Aluminum and steel construction for durability Protects bending brake hinges from potential damage Cuts aluminum up to.050. Painted steel up to 24 guage and copper up to 36 oz. IF YOU HAVE ANY QUESTIONS PLEASE ASK! Don't miss out on this one! After the auction ends. You must call us after auction's end to pay by Visa or Master credit card we do NOT take online payments. paypal) Our hours of operation are Monday-Friday 9AM to 8PM central time only. You must call in order to pay for this item. Texas residents must pay 8.25% sales tax. We accept Visa and Master Card only. Shipping and handling for this item is stated in auction and insurance is included. Feel free to ask any questions. No overseas bids. Mainland 48-states only. THANK YOU! H21612 DH
$
1999.00
Buy It Now
Condition: Used
Location: West Covina, United States
This is a Precision Manual Hand Bender in working condition! Radius forming range from 0" to 12". The Di-Acro Bender is a multi-purpose machine that is ... morequickly adaptable to a variety of bending operations.
$
599.99
Buy It Now
Condition: Used
Location: Cocoa, United States
For local pickup.
$
692.87
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. 1/4" / 6 mm #2 Rebar(0-55°), 1" / 25 mm #8 Rebar(0-90°). ... moreIt is able to satisfy your various bending demands.
$
389.76
Buy It Now
$75.44 Shipping
Condition: New
Location: CHELTENHAM, United Kingdom
The ring roller allows you to shape arcs or circles with large radii on bars, flat bars, pipes and profiles. The ring roller is equipped with a ruler ... moreto facilitate the repeatability of arcs. - round pipe Ø 20 x 3mm (3/4in).
$
125.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Better Values Friendly Service Fast Shipping BRAND NEW 36" Sheet Metal Bender Max. Length: 36" Bending Material Gauge Up to: 20 Gauge Mild Steel& ... more14 Gauge Aluminum Makes up to 90 º degree bends. Angle 45 º degree Designed for Bench Top Mounting*C-Clamp Required* NOT INCLUDED Make adjustments quickly using a protractor Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
266.99
Buy It Now
Free Shipping
Condition: New
Location: China
Pipe Bender Stainless Steel. Bending Durable Tools. Iron Copper Aluminum Tube.
$
4600.00
Buy It Now
Condition: Used
Location: Oxnard, United States
THE PICTURE IS CLEARER IN PERSON. THESE PLANS ARE FOR THE MODEL 32 PIPE TUBE BENDER. HYDRAULIC OR MANUAL. ALL PARTS ARE THE EXACT SIZE SO YOU SHOULD HAVE ... moreNO PROBLEM WITH MEASUREMENTS. ANY ROUND EDGES CAN BE LEFT SQUARE THEY DON`T HAVE TO BE ROUND. I SUGGEST YOU MAKE YOUR PART OUT OF WOOD FIRST THEN USE THE WOOD FOR A GUIDE. THIS BENDER USES DIES UP TO 2-1/2 OD TUBING WITH A WALL THICKNESS OF.125. STENCILS ARE DRAWN ON A 22" X 28" PAPER. YOU DON`T HAVE TO MAKE EVERY HOLE JUST THE HOLES THAT ARE NEEDED FOR THE DIE YOU ARE USING. IF YOU NEED ANY PICTURES OR MEASUREMENTS FOR ANY PARTS AND IT IS AVAILABLE YOU CAN EMAIL ME ANY TIME.
$
312.25
Buy It Now
$22.75 Shipping
Condition: New
Location: Eastpointe, United States
Van Mark Quick Score Precision Sheet Scoring Tools. Be sure you get the right score, a QuickScore™. View all of our Van Mark Brakes and Accessories. Van ... moreMark Model No. 3016. Rugged aluminum construction for durability.
$
1200.00
Buy It Now
Condition: Used
Location: Yorktown, United States
$
274.99
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Columbus, United States
The rest of it looks totally fine, but it is being sold as is.
$
341.82
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
900W Pure Copper Coil Motor: This portable rebar bender features a 900W pure copper coil motor, which can run quietly with low noise and significantly ... moreimprove your working efficiency, reducing unnecessary wear.
$
9000.00
Buy It Now
Free Shipping
Condition: New
Location: Laporte, United States
Here are some new heavy duty import plate bending rollers. The OEM rating for these is 4.5mm x 1300mm. Most importers of these 120mm diameter roll machines ... moreswitch this to 3/16" thick. We find this rating rather slippery as 4.5mm is less than 3/16" so we conservatively specced our imports for 8 gauge (0.171") which it does well. We have used one of these rollers in house and have been very pleased with it. The construction is good and with the pre-crowned hardened rolls, it keeps sheets very flat parallel to the rolling axis. Further specs are listed above. These are in stock in our warehouses and are ready to ship. Specs listed above.
$
2195.00
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
They are 15% lighter, and 20% stronger than the 50 series model brake C Castings. This siding brake is made in a contractor model and a heavy-duty residential ... moremodel, with the main difference being the thickness of the material each brake can bend.
$
2095.00
Buy It Now
$225.00 Shipping
Condition: New
Location: Eastpointe, United States
The POWERslot™ was developed for two reasons: to increase the strength of the hinge and to allow smaller bends. The free-motion feature allows the POWERslot™ ... moreto keep a targeted, maximum pressure on the material throughout the entire bend.
$
1999.00
Buy It Now
Condition: Used
Location: West Covina, United States
This is a Precision Manual Hand Bender in working condition! Radius forming range from 0" to 12". The Di-Acro Bender is a multi-purpose machine that is ... morequickly adaptable to a variety of bending operations.
$
350.00
Buy It Now
Condition: Used
Location: Port Richey, United States
We are located 30 minutes north of Tampa. Brake angle: 0-135 degrees. Like new mostly. And the pull handle was replaced. Material thickness capacity: ... more20 gauge mild steel. Material width capacity: 24".
$
6500.00
Buy It Now
Condition: Used
Location: Keedysville, United States
Roper Whitney's Connecticut hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss ... morerods and braces provide strength and durability.
$
125.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
36 Inch Sheet Metal Bending Brake Bender Descriptions: Brand NEW 36" Sheet Metal Bender Max. Length: 36" Bending Material Gauge Up to: 20 Gauge ... moreMild Steel& 14 Gauge Aluminum Makes up to 90 º degree bends. Angle 45 º degree Designed for Bench Top Mounting*C-Clamp Required* NOT INCLUDED Make adjustments quickly using a protractor Quantity: 1 We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* 9.25% sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground Service. Excluding PO BOX. APO, HI, AK, PR and GU. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $58.88(1st unit) + $44.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buyers have 72 hours to inspect item for damages and must contact the seller immediately if shipping damage is discovered. All returns required an RMA#Return Au
$
44.99
Buy It Now
$4.99 Shipping
Condition: New
Location: Camarillo, United States
The brake is compact and lightweight yet sturdy enough for professional production runs. Handles material as thick as 16 gauge.
$
254.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
Descriptions: BRAND NEW 8' mini shear/ brake Base dimension: 9' x 5' Blade length: 8' Maximum cutting and bending length: 7-7/8' Capacity: ... moreAluminum: 1.2mm-Copper: 1.0mm-Circuit board: 1.5mm-Tinplate sheet metal: 1.0mm-Brass: 1.0mm P erfect for those small arts and crafts projects where a larger machine is just too big to be used efficiently. H as an 18 Gauge aluminum maximum capacity and a 20 Gauge copper/brass maximum capacity. Overall dim: 11'L x 8-1/2'W x 11-1/2'H Quantity: 1 We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Some Products are available for Local Pick-Up in Los Angeles Area Zip Code 91733. Please contact us for availability and discounts. California residents only* 9.25% sales tax will be added at check out. Shipping and Handling Fee to Lower 48 States: FREE SHIPPING Ground Service. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller for additional information. Shipping To Canada: $80.00(1st unit) + $64.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: Buyers have 72 hours to inspect item for damages and must contact the seller immediately if shipping damage is discovered. No returns for any reason after that. THANK YOU FOR VISITING
$
830.00
Buy It Now
Free Shipping
Condition: New
Location: Poland
The bending machine must be attached to the locksmith table - the table must be securely, firmly attached to the ground. bending capacity (steel) –1.0mm ... more(19 Gauge). bending capacity (aluminuim) –1.5mm (15 Gauge).
$
792.10
Buy It Now
$182.31 Shipping
Condition: New
Location: SHEFFIELD, United Kingdom
New design of ring roller, 75mm wide rolling capacity. Drive roller deep knurled for maximum grip on work piece, no slipping or getting clogged up with ... morescale. Rollers are instantly removable no un-bolting of components, main shaft simply slides out to change roller or remove the rolled circle.
$
175.00
Buy It Now
$27.20 Shipping
Condition: Used
Location: San Pierre, United States
Brand new Baileigh ring roller. Never used. Still has factory grease coating it to prevent rust. Will roll up to 1/4 tubing
$
850.00
Buy It Now
$200.00 Shipping
Condition: New
Location: Greeley, United States
Air over hydraulic powered, and set up for Pro-Tools 105 bending dies. We also have one for JD2 model 32 dies depending on your brand preference. Our ... morebender has 3/4 inch thick bending arms and 5/8 hardware so you can bend thick wall tubing without having to worry about bending or damaging the bender. It doesn't include the dies, you will have to order those off Pro-Tools website. It takes 2-8 weeks to build and get in parts. 
$
17.99
Buy It Now
$4.25 Shipping
Condition: New
Location: Augusta, United States
4 NEW Tapco 11397 - Faspin PINS.
$
675.00
Buy It Now
$8.95 Shipping
Condition: New
Location: Ontario, United States
Search Search by Category ► Air Tools Compressors ► Automotive ► Cordless ► Drywall Lifts ► Generators ► Hand Tools ► Inside The Home ► Masonry ► Outdoor ... moreHeating ► Outdoor Power Equip. ► Pool Equipment ► Power Tools ► Safety Gear ► Tarps ► Welding ► Woodworking ► Other Click an Image to Enlarge Product Details Model: M1011* Condition: NEW MSRP: $340.00* Warranty: 1 Year Warranty* This pan and box brake is an indispensable tool if you need to increase the strength of sheet metal plates with bends. Or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal. The Model M1011 bends mild steels up to 20 gauge thick, 24" wide, and ranging in angle from 0° to 135°. Material width capacity: 24" Material thickness capacity: 20 gauge mild steel, Brake angle: 0-135 degrees, Box fingers: 2-1" 4-2" 2-3" 2-4" Maximum box depth: 1-3/4" M1011 SHOP FOX 24" Box/ Pan Brake Owners Manual, 2-Year Limited Factory Warranty, 30 Day Satisfaction Guaranteed Specifications Material width capacity: 24" Material thickness capacity: 20 gauge mild steel, Brake angle: 0-135 degrees, Box fingers: 2-1" 4-2" 2-3" 2-4" Footprint: 10-1/2" x 26-1/4" Maximum box depth: 1-3/4" Approximate shipping weight: 134 lbs. All electrical items are meant for use with 120v power. Unless otherwise stated. Domestic International Domestic(Lower 48 States) $0.00 Canada: $114.04 2nd Day Air: $145.00 Australia: $218.69 Hawaii& Alaska: $145.00 Western Europe: $160.24 Local Pick Up Available: $0.00 Other International Destinations: $218.69 Orders are usually processed and shipped within 24 to 48 hours of receipt of your payment. Most orders are shipped by FedEx Ground. So please provide us with a physical shipping address(failing to do so may delay your order) We may ship an order by a different courier at our discretion(usually larger i
$
89.81
Buy It Now
Free Shipping
Condition: New
Location: Sultanpuri F Block S.O, India
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
aims NICE! NATIONAL 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- U4816 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by National Sheet Metal Machines. This is a used Manual Box and Pan Finger Brake in working condition. Model# U4816 Serial# 1115-979 Specifications: Capacity(mild steel) 16 gauge(1.6 mm) Capacity(stain. steel) 20 gauge(0.9 mm) Maximum Forming Width: 48" Shut Height: 1-1/4" Fingers Included: 5) 2" 6) 3" and(4) 4" Overall Dimensions: 77" x 43" x 46" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category ... moreby visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! NATIONAL 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- U4816 NICE! NATIONAL 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- U4816 NICE! NATIONAL 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- U4816 NICE! NATIONAL 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- U4816 NICE! NATIONAL 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- U4816 Reliable Tool Inc. c 2011 | Powered by
DIACRO 24" SLIP ROLLER.IN VERY NICE CONDITION.SHIPPING IS $99.
USED RAS TURBOBEND CNC FOLDER MODEL 61.31 ♦ YEAR: 2003 Specifications: Working width: 124” Max sheet thickness: 16 gauge Smallest inside bend radius: 1.5x material thickness Smallest inside flange dimensions: 6x material thickness Max upstroke: 4.72” Folding beam adjustment max: 0.19” Backgauge range: 31” 39.4” Working height: 33.5” Air requirements: 5 bar Speeds: Down stroke speed: 2.5” per second Folding beam speed max: 80° per second Backgauge speed: 31” 30.4” 1.9 seconds Dimensions: 172” x 60” x 54” Weight: 5.500 lbs Equipped with: ¨ System 5000 Controls holds 49 programs& floppy drive ¨ Portable dual function foot pedal ¨ 10mm& 20mm folding beams We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact us. 800 899 8182 ext. 208 Check out my! ... morePLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately the machine or machines to conform to all Federal,
Quote#25397. 3' x 1-1/4" BERTSCH INITIAL-TYPE PLATE BENDING ROLL New 1974. Serial No M-10210, Model 14 EQUIPPED WITH: Air Drop End Operators Control Console Power Rear Roll Adjustment Power Front Roll Adjustment CATALOGUE SPECIFICATIONS: Plate Bending Capacity. 3' x 1-1/4" Length Of Top Roll. 4' Length of Bottom& Rear Rolls. 3' Top-Roll Diameter. 14" Bottom-Roll Diameter. 12" Rear-Roll Diameter. 12" Main Drive Motor. HP. 40 HP. Rear Roll Adjusting Motor. HP. 25. Weight. Approximately. 37100 LBS. CONDITION: Appears to be in Very Good Condition From a Precision Naval Facility PRICE: F.O.B. LESTER. PA. $39,500.00. All Machines/Equipment Subject to Prior Sale.
Quote 25702. 27.5" X 0.040" CAVANI& GOLDONI INITIAL PINCH ROLL Serial No A-248. Model CP7/86 EQUIPPED WITH: Initial Pinch Type Design Air Drop End Manual Rear Roll Adjustment Pneumatic Pre-Bend Roll CATALOGUE SPECIFICATIONS: Bending Capacity. 27.5" X 0.040" Top Roll Diameter. 3-3/8" Bottom Roll Diameter. 3-3/8" Motor. Horsepower. 1 HP. Electrical System. 220-440/3/60. Floor Space Required. W x D. 6' x 3' Overall Height. 4'4" Note: Replacement Cost Approximately $27.000.00 PRICE: F.O.B. OUR WAREHOUSE. $4.950.00. Machinery/Equipment Subject to Prior Sale.
Webb Single Pinch Plate Rolls 3/8” Mild Steel Plate Pinch Rolls 8’ With 9” Diameter Rolls 3 Phase 440/480V/ 208-240V Frame: 3’9” Wide x 5’ High x 17’6” Length List of maintenance recently completed& spare parts: Machined rolls– 4 years ago. New drive clutch& spare part for clutch assembly. Rebuilt air cylinder for lift on top roll& opens rolls up. Put grease bank on all spots that take grease. Rolls are still under power and currently being used. Cone being rolled in picture was for a customer last week. Company is purchasing larger capacity rolls. Contact seller for shipping rate.
newtech ssr standing seam metal roofing machine with the 1" nail flange profile. built on a nice custom traile& top. this is not a rain gutter machine. will do 6 roofing profiles. 808 357 5194
www.meci.com Greenlee Rigid Pipe Roller Support Attachment 17984 Click image to enlarge. Manufacturer: Part# MECI Part# Condition: Dimensions: Weight: Description: Greenlee 17984 735-0692 Used-Used Good 5 ½” Length. 3” Width, 5 ½” Height 5.8 Lbs Greenlee Rigid Pipe Roller Support Attachment 17984 Greenlee Rigid Pipe Roller Support Attachment 17984 For Rigid Pipe: 1½” 2” Manufactured by: Greenlee Part# 17984 Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Payment We accept the following forms of payment: PayPal- We will ship to the address provided on your PayPal payment only. Credit Cards(Visa. MasterCard, American Express& Discover) Please call MECI to make your Credit Card Payment 800-422-3525 ext 5 830am to 500pm EST Mon-Fri Shipping Cost ... moreand Policy USA USPS Priority Mail or ground services are used. International Shipped USPS International Priority Mail or USPS First Class International. We will not mark as a gift in any circumstance. Shipping cost does not include import taxes. Duties or brokerage fees, these charges are the buyer's responsibility. Please check with your customs office to determine what additional cost my apply. COMBINED SHIPPING We will combine shipping the best we can. If you purchase other items we will put them in the same box if they can be shipped securely and safely together. Shipping cost at checkout will show the combined charges but additional charges may apply if needed. Please wait to make your payment until you have purchased all items. You have 3 days from the end of the first purchase to add additional items to your order. All of your purchases will be consolidated into one checkout with one payment. SALES TAX- For shipments to Ohio. We are required by State law to collect 7% Sales Tax. STORE PICKUP Please note in checkout the estimated date/time you want to pickup your item(s) Handling fee(if stated) sales tax still apply. Customer Service. Warranty& Return Info We are
Quote#26792 3'6" x 3/8" HENDLEY& WHITTEMORE INITIAL-TYPE PLATE BENDING ROLL New 1955. Serial No 14738, Model 4B EQUIPPED WITH: Manual Drop End CATALOGUE SPECIFICATIONS: Plate Bending Capacity. 3'6" x 3/8" Length of Rolls. Overall. 44" Top-Roll Diameter. 7" Bottom-Roll Diameter. 7" Rear-Roll Diameter. 7" Motor. Horsepower. 5 HP Floor Space Required. L x D. 10'2" x 3'6" Weight. Approximately. 4500 LBS PRICE: F.O.B. OUR WAREHOUSE. $7.950.00 Machine/Equipment Subject to Prior Sale.
LARGE LOCKFORMER ROLLFORMER. WE BOUGHT THIS MACHINE 6 OR 7 YEARS AGO, TO MAKE PANELS FOR BILLBOARD FACES IT HAS BEEN USED VERY LITTLE AND IS IN GOOD WORKING CONDITION. PLEASE CALL ME@ 864-992-2539 FOR MORE INFO AND PICTURES
Ercolina 030 Mega Bender with A40/P Two Axis Positioner Bending Capacities: Model- 030 Mega Bender Tube(Min. 1/4" Max. 3" Pipe(Max. 2 1/2" Sch. 10 Centerline Radius(Min. 2 x Profile Diameter(Max. 15" Degree of Bend- 0-120 Degrees Specifications: Bending Speed- variable to.6 to 2.2 RPM Programming- NC with touchpad(30) programs(9) bends per program Voltage- 220 or 440V 3ph Length. Width, Height- 27" x 15" x 36" Weight- 480 lbs. A40/P Two Axis Positioner Dimensions and Specifications Height- 43" Length- 110" Width- 32" Material Capacity 1/2" 2 3/4" Through Spindle(Max. 1" O.D Chuck Rotation- 360 Degree Weight- 180 lbs This item is being sold“As Is” and with No Warranty. Express or implied. Buyer assumes all risks of operation or transporting this item and will not hold Emrick ... moreMachinery Sales Inc responsible for and injuries or damages. All goods and services are provided“AS IS” and with No Warranty. Express or implied. The Seller(Emrick Machinery Sales Inc. and their respective affiliates, officers, directors, employees and contractors specifically disclaim all items are sold“As Is, Where Is” No Warranties. These are used goods. No complete thorough inspection has been undertaken. The buyer takes the entire risk as to the quality and performance of the goods. And you assume the cost of any and all necessary servicing or repairs, should the goods prove defective or not to your liking after purchase.
Pexto 36 inch Finger metal brake used. Good working cond. Closing shop everything must go!
USED NIAGARA MODEL 6-72 INITIAL PINCH PLATE BENDING ROLL Specifications: Rolling length: 72” Thickness: 3/16” Minimum diameter of rolled cylinder: 12” Size of all three rolls: 6” Overall roll length: 76” Rolling speed: 25 FPM Main motor drive: 7-1/2 HP Dimensions: 108”L x 48” W x 48”H Weight: 6.000 lbs Equipped with: All rolls driven Manual pinch roll adjustment Manual forming roll adjustment Forward/Reverse Motor brake Manual drop end Safety cable Longitudinal grooves in lower rolls We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact us. 800 899 8182 ext. 208 Check out my! PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If ... moreyou have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately the machine or machines to conform to all Federal, State and Local Government Safety Standards, and all Industry Safety Standards. MDNA return privilege applies to all machines(unless sold as-is) We will accept(within 30 days of shipment) a
SELLING A MULTIQUIP MB25-HD REBAR BENDER.INDUSTRIAL BENDS 3/8" TO 1" COMES WITH DIES AS SHOWED IN PICTURES AND ALSO FOOT PEDAL.ANY QUESTIONS PLEASE CONTACT ME THANK YOU FOR LOOKING AT MY AD! THIS ITEM IS LOCAL PICK UP ONLY. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e041bb7f9-0xf3-
US PAMCO MANDRAL TUBE& PIPE BENDER W/ TOOLING Description: Up for sale is a Mandral Tube& Pipe Bender. This bender is in good working and operating condition. It comes with the pictured tooling below. The machine has dies on it for 1-1/2" x 1/8" tubing. FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may ... morebe offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon@comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder alert with eBay. Gary S. Aragon LLC will hold the non-paying bidder responsible for the eBay fees and commissions occurred by us. SHIPPING Buyer is responsible for all shipping costs and arranging shipping for bigger/heavier items. Most of our items are shipped from San Leandro. California 94577. UPS only handles up to a maximum of 150 lbs. Over that weight will require the services of a freight company. Please inquire about the freight/shipping charges before you bid or purchase
Fabricated Metal Bending Machine Sold AS IS Located at: Rambros Inc 6141 Arlington Expressway Jacksonville. FL 32211 904-641-0822 RambrosMachinery.com
LEONARD HYDRAULIC TUBE BENDER MODEL 60 2" O.D. CAPACITY( 16ga-065) MAX TUBE LENGTH: 11 1/2' MAXIMUM RADIUS: 12" 10 POSITION TURRET 7 1/2 HP MOTOR 220/440 VAC 3 PHASE WEIGHT: 1500lbs NO TOOLING Please call(256) 536-7871 from 6:30am to 4:00pm central Mon-friday. We do not arrange shipping but will load anything we sell onto your truck or trailer. We do offer a 30 day return policy and are members of MDNA. We do reserve the right to cancel the auction at any time in the event of local sale.
3" x 3" x 3/8" Roundo Model R-4M Hydraulic Angle Bending Roll(2000) Specifications Angle Leg Out: 3-1/2" x 3-1/2" x 3/8" Angle Leg In: 3" x 3" x 3/8" Schedule 40 Pipe: 3" I Beam& Channel: 6" Square Bar: 2" Flat Iron: 7" x 1" Flat Iron On Edge: 4" x 3/4" Equipped With: 6 Button Portable Control Box w/ LCD Digital Readouts. Standard Set of Tooling, Manually Adjusted Guide Rolls, Rebuilt in(2010) Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4(2) LNS HYS Gatling Type Bar Feeders Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Model HYS 6.68-5.2 3/4" 2 5/8" diameter 12' max length s/n 37346-95. New 1995 Model HYS 6.65– 5.2 3/4" 2 1/2" diameter 12' max. length s/n 37312. New approx. 1994. Both equipped with hydraulic units and front& rear stands Terms: No shipping. Sold loaded on a truck. A Mirada, CA FOR MORE IN FORMATIO N ON THIS MACHINE OR ANY OTHERS PLEASE CALL JEFF AT MACHINERY NETWORK 888-998-440
| ICE-MTE has provided quality products and services to the Cinema Industry since 1956 and is pleased to present: Vintage Whitney Jensen Model 29 Foot Press This item is in good working condition when removed from service. The purchase price does not include. Shipping, packing, or any other cost. These are the responsibilty of the buyer. We will try to assist and will give tailgate load at no extra cost. Other services are additional. Fla. Georgia resident must pay sales tax. Don't miss this wonderful opportunity! See our other interesting Ebay offers by going to our. Magna-Tech Electronic Company Inc. Atlanta Branch 5066 Charbett Drive College Park. GA(404) 305-0797 Thanks for visiting!
Good condition Buffalo#2 angle bending roll- we had to apint it because the paint was peeling but the roll seems to be in good shape. The electric was recently updated with new contactors. Capacity is 4 x 4 x 5/8 angles. Comes with the standard rolls. Wired 230v 3 phase. Inspection in my Aberdeen. NJ shop under power is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
Pines Vertical Bender Pines G.O. No. M95053. S# 44361-69503, 230/460v 3ph 60hz, Cleaned& Painted. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item ... moreplease contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
Pre-owned HAEUSLER Heavy Duty 4-Roll Plate Roll Model: VRM-HY• Serial No. W010412• Jorgenson Stock No. 4661• Material Bending Width(Max. 60" Bending Thickness class 2 material. 1.75” to 53" Diameter. Bend 2.25" x 3'wide to 54" diameter• Prebend Thickness class 2 material. 1.25” to 27" Diameter. Prebend 1.75" x 3' wide to 71" diameter• Upper and Lower Roll Diameter. 17.72" Bending Roll Diameter. 13.78" Electrical. 460V/AC• Main Drive. 60 HP• Hydraulic Pump. 20HP• Hinge and Upper Roll Tilt. Hydraulically Operated• Lowering of Lower Roll. Hydraulically Operated• Adjusting Movement. Hydraulically Operated• Machine Dimensions: Width. 108" 2750MM) Length. 228" 5780MM) Height. 112" 2840MM) Weight. 65.000 lbs(31,000 Kg) Features: Cone Bending Attachment• Guide Shoe Connection Roller• ... moreOptical Indicator• One Man Operation• Automatic Plate Alignment• Definite Internal and External Drive• Plate Edge Setting with Shortest Flat• Accurate Rolling Tolerance To see Small Video of machine under Power click:
Quote#23817. 20' x 1/8" BERTSCH INITIAL-TYPE PLATE BENDING ROLL New 1957. Serial No. 8888, Model 9 EQUIPPED WITH: Manual Drop End Power Bottom-Roll Adjustment Dial Indicator for Bending Roll Position CATALOGUE SPECIFICATIONS: Plate Bending Capacity. 20' x 1/8" Plate Bending Capacity. Mild Steel. 16' x 3/16" Top-Roll Diameter. 10.5" Bottom-Roll Diameter. 10.5" Rear-Roll Diameter. 10.5" Main Drive Motor. HP/RPM. 10 HP/1130 RPM. Rear Adjusting Motor. HP. 7.5 HP. Electrical System. 230-460/3/60. Weight Approximately. 31000 LBS. CONDITION: Appears to be in Very Good Condition. PRICE: F.O.B. OUR WAREHOUSE. $15.500.00. All Machines/Equipment subject to prior sell.
PLATE ROLLS 55"WIDTH X 6" DIA. ROLLS FORWARD& REVERSE FOOT SWITCH FOOT OPERATED E-STOP 480V. 3 PH, 60 HZ QUESTIONS OR MULTI-LISTING DISCOUNT? CONTACT JACK WHITMIRE(864) 706-2384 or JAMIE RENFROW(864) 303-1512 jamier@u-equipment.com. Powered by The free listing tool. List your items fast and easy and manage your active items.
Please Refer To Machine# 944957 Pines Tube Bender B1804 Benders- Pipe Tube& Bar Bar/Pipe/Tube Capacity Manufacturer Pines. Model No. Serial No. 11015-61363. Year Mfg. Vertical/Horizontal Design Maximum Bending Radius Clockwise/Counter Clockwise Rotation Features/Accessories Condition Comments FOB Point Elk River. MN.
Pexto 055 154070055 Adjustable Bar Folder 36" 20ga Hand Brake SPECIFICATION Bullseye Catalog# 28241 Used machine in good condition. Folding edges show signs of normal use. Machine does not appear to have been abused or missused. See specs link for specificaitons. Weight: 485 lbs, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE ... moreREAD INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If y
Richards Hydraulic Pipe/ Tube Bender Specifications: Maximum radius capacity: 12" Maximum degree of bend: continuous for coil bending, Power 3 HP. 220V-3 phase, 440V-3 phase, Rotary table size: 14" Rotary table speed: 0-10 RPM, Height: 41" Width: 36" Depth: 25" Shipping Weight: 875 lbs. Capacity: 1/4" x 4" mild steel- flat, 3/8" x 1" mild steel- edge, 3/4" round mild steel, 3/4" square mild steel, 1-1/4" steel tubing. 16 gauge, 3/4" schedule 40 pipe
ONE– USED WINTON MULTI RADIUS. 2 AXIS CNC ROLL BENDER MODEL TR40 ♦ YEAR: 2002 Specifications: Tube bending capacity: 1-1/2” OD x.035” wall S.S. Repeatability: 002 on linear ram movement Pitch control: Manual support adjustments Max pressure: 2000 psi/ 1 HP Program storage: 100 programs Dimensions: 48” x 33” Approximate weight: 780 lbs. Features: Microprocessor controlled. Program up to 30 ram/roll moves Keypad& display(24 keys) for user input Fast production bending. Variable speed control on roll and ram drive High-resolution encoder. Direct drive to roll dies Heavy duty linear ball bearings guide ram head Multi-radius bending. Programmable Equipped with Dynaflux R1100 Cooling System sn-11V21252 1” round. 1-1/4” round and 1” square tooling PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside ... moreof Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately the machine or machines to conform to all Federal, State and Local Government Safety Standards, and all Industry Safety Standards. MDNA r
Conrac/Leonard Bend Master Model PBHDX. S# 5326-201. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative ... morefeedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
METALWORKING MACHINERY* BUY* SELL* APPRAISE* LIQUIDATE* ADVERTISE* LOCATE Quotation is for immediate acceptance and subject to change without notice. It is understood there are no conditions or agreements outside of this written proposal and that all prior conversations. Agreements or representations with reference to the subject matter are superseded. We reserve the right to correct typographical errors. Specifications are approximate only and intended solely as a guide. Title to property described above shall remain vested in seller until the entire purchase is paid in full. The described equipment does not incorporate approved activating mechanisms, operator safety devices, or safety guards as required by O.S.H.A. or otherwise. It is the purchaser's responsibility that said equipment be so equipped and safeguarded to meet O.S.H.A. ... moreand other requirements before placing such equipment in operation. We do not imply or guarantee any compliance with any government safety requirements or standards. It is further understood and agreed this buyer or subsequent buyers will hold vendor harmless for causes of action whatsoever. This agreement constitutes the entire contract of sale of the goods named herein. No modification of this contract shall be binding upon Seller unless in writing and signed by authorized officer of Seller. Date: 10/08/12 CST Time: 01:39:10 We are pleased to quote the following machine for your consideration: Click for Photos Click for Movie Click for PDF Please Refer To Machine# 944860 Winton CNC Tube Cutoff w/ Rotary Draw Bend CTL-23PA& RD25 T6855 Tube Machinery(Cut Off) Typical Dia. Capacity 23mm OD Capacity. Tooled for 1/2" and 7/8" Manufacturer Winton. Model No. CTL-23PA& RD25. Use Efficient way to produce low to medium HVAC Tubular Parts. Year Mfg. 2010. PLC PLC controlled chipless cutter + controlled draw bender. Draw Bending CNC rotary draw bending- servo controlled. Cutoff CNC chipless cutoff- pull apart type. Cuts 2 types of cuts: pull apart or depth. Condition Like
Description Draw Board for Making Shapes out of thin guage metal Highly Specialized Machine for taking either plain or fancy designed rolled flat stock and making continuous shape. Great for Custom shaped borders or molding Used by Lighting Manufacturer. Could be used by Manufacturer for Architecture Products, Lighting Manufacturers or anyone Manufacturing Continuous Borders or Accents. 16 feet long. 13 1/2" wide General Electric Motor Model 5K225D1377. 3 HP, 550Volts, 3.30 Amps, 1725 rpm, 60 Cycles Limited forming dies available Payment Paypal accepted. Payment to be made no later then 3 days after the invoice is sent to buyer. We accepted PayPal payment or Company check only. If you don't have PayPal account, please sign up and learn more about paypal at www.paypal.com. It's easy and fast. All non-pay bidders will result in ... morea non-payment buyer alert from Ebay which may suspend your account. Shipping I will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received my invoice. Items less than 100 lbs will go out UPS Ground. If item is to be shipped by common carrier, please send me an email with the following info: Going to a shipping dock, residential, lift gate need. Local Pickup is always welcome. If buyer wishes to arrange to use their own freight account or carrier, they will be responsible for all scheduling, paperwork, claims and any or all damages incurred during shipping. Terms of Sale Purchaser is encouraged and acknowledges that it can inspect the Equipment and that it is not relying upon any photos. Videos, representation, statement or other assertions made by the seller with respect to the Equipment condition, but is relying upon its own knowledge regarding the Equipment and/ or its own examination of the equipment. As-Is/Where-Is under this disclaimer is hereby agreed, that the Seller and Purchaser agree that the purchaser is taking all the used equipment"As-Is"FOB, Where-Is" with any and all latent and patent defects and
1) Used 4' Soraluce Model TRO-1250 Radial Arm Drill Specifications: Arm length: 49.2" Column diameter: 11.8" Drilling capacity- mild steel: 2" iron 2 1/8" Motor: 5 HP Speeds(12) 29-1700 RPM Feeds(6) 005"013" Spindle taper: 5 MT Spindle stroke: 11 3/4" Head travel on arm: 37 1/2" Arm travel on column: 27 1/2" Max height under spindle 52 1/4" Base working area: 52 1/2"x39 3/4" Equipped with: Power elevation& power clamping Power spindle down feed Box table FOR MORE IN FORMATIO N ON THIS MACHINE OR ANY OTHERS PLEASE CALL JEFF AT MACHINERY NETWORK 888-998-440
Pines Model 3T Vertical Tube Bender(1986) Specifications Model: 3T- M-64622, Bending Capacity: 1-1/4" O.D. x.065" Wall(Steel Tubing) Tube Size Range: up to 1-1/4" O.D. Centerline Radius: Permitting Bend to Max angle) 3-1/2" Maximum C.L.R. Minimum Work Diameter: 2" to 3" Maximum Bend Angle: 140 Degrees- w/Normal Tooling, With Special Tooling: 165 Degrees- w/Special Tooling, Operating Pressure: 2.000 PSI, Production Rate: up to 1500 Bends/Hour, Main Motor Drive: 20 HP, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Just Removed From Service Now at eBay auction and available for your inspection at our JV Partners warehouse in Cincinnati. Ohio is this"EXCELLENT" Montgomery 6' X 14 Gage Initial Pinch Bending Rolls. Specifications: Initial Type Bending Capacity. Mild Steel: 14 Ga. Maximum Bending Length: 6' Diameter Of Rolls: 4-1/2" EQUIPPED WITH: 7-1/2 HP Forward/Reverse Foot Switch Manual Adjustment Of Lower Front and Lower Rear Rolls Drop End Approximate Weight: 5.000 Lbs. F.O.B. Cincinnati. Ohio PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. ... moreFirst of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be. Send it back to us and we’ll refund what you paid us. Every item we sell. Unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse(515 Kercher St. Miamisburg, OH 45342) We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days. Whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping. We accept Company Checks. Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, PayPal, or even Cash. We are: Machine Tools of America and you can contact us by phone: Bruce at 937-545-8475 or Andy at 937-604-6031. Our fax is 937-866-6668 or 937-866-8514 and the office phone is 937-866-
ENERPAC STB-101H HYDRAULIC PIPE BENDER 1/2" TO 2" + PUMP XTRA NICE! Description: ENERPAC HYDRAULIC PIPE BENDER SET Model# STB-101H Pipe Range Nominal Size 1/2" 2" MAX bending is 90 degrees, Max. Operating Pressue 700 bar. Set includes genuine Enerpac cylinder. Hose and manual hand pump. Storage case, angle indicator, and shoe lock pin. Each set is in excellent used condition! It has been tested. And works great! New, this item would cost over $3,500.00! This set is GUARANTEED AGAINST DOA! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it ... morein and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are open Monday- Friday. 8 to 5 pm. We list new item da
Lang Model HY80 CNC MR Heavy Duty CNC Tube Bender(2000) Specifications Tube Bending Cell Capacity: 3.55" Centerline Radius: 1.97"10" Tube Track Length/Tube Draw Length: 118" Debundler Length: 23.6"118" Cobtrol Type: Lang MMI Multicontrol 2020 CNC Control, Origin: Built in Germany, Equipped With: Lang MMI Multicontrol 2020 CNC Control. Manual Pulse Hand Wheel Generator. Counter Clockwise Bender, Misc Tooling, Built in Germany, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Selling With No Reserve! Hi! This week I have come across 5 unique Pexto Beader. Crimper and Roller Tools! Some date back to around 1860. All of these Tools came from an older gentleman who made tractor sheet metal, fenders and hoods. He also made sheet metal for Model A and T Ford's, and Studebaker's from the 1920's. I will make mention of the condition of each individual Tool. I have for Auction here a nice antique Pexto? Deep Throat Beader/Crimper. I'm not a 100% sure but I think it is a Pexto. It comes with the base. This item is freed up and all parts are loose/free(also base) The adjustable stop will probably need new bolts as the one is slightly bent.See Pictures. This item will be shipped for $70.00 via FedEx in the lower 48 States. Get yourself a great deal here. Local pick-up is always welcome! For more information ... moreyou can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Hon
REED MFG 7/16" OD TUBE CAPACITY TUBE BENDER HAND OPERATED 2744 LS1 Click Images to Enlarge Item Description REED MFG. 7/16" TUBE BENDER 02744 Qty: 1 Tube Capacity: 7/16" Bend Radius: 1 1/2 This bender appears to be in good used condition. New. This item would cost over $130.00 Each! You are purchasing one bender per order! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's ... morewebsite when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are open Monday- Friday. 8 to 5 pm. We list new item daily so check back often We Appreciate Your Business! Shipping& Payment Stock# 41582 LS1 WE ONLY SHIP TO EBAY AND PAYPAL CONFIRMED ADDRESS. This item will ship via UPS or USPS within the USA. Please use our calculator below for accurate rates. Outside of the US we ship b
Rotodie 12Ft Sheet Metal Break For use on light gauge metals Free loading. Unloading will be done or arranged by purchaser Shipping charges will be supplied when requested through email Serial Number 82073 Model Number 1542 PAYMENT& SHIPPING TERMS We accept payment via PayPal If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within14 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 14 days and you have not contacted us regarding ... morepayment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number and buyer ID with all forms of payment and correspondence. Items are also available locally and available only while supplies last. Buyer pays actual freight cost. E-mail for shipping quote. Pick up is also available loading free. Shipping costs figured for lower 48 states. Outside the lower 48 contact for shipping quote. ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e238f98a6-0xf1-
0 false 18 pt 18 pt 0 0 false false false 0 false 18 pt 18 pt 0 0 false false false I will now offer shipping to the lower 48 only but keep in mind you will have to do the legwork. I will not give out quotes. Please call the number below. Here is the info you need. I’ll be shipping from, RAC Transport 460 N 17 th St. Las Cruces, NM 88005 1-800-777-0381- Call This Number for quotes Provide your Address: 1-Pallet-L-40” W-48” H-45” Weight- 400lbs Pre-paid or collect Residential or Business I’m selling my Tube Shark Bender and Endmill nothcer. The Tube Shark is in great condition and comes with everything you see in the pics. Basically everything I received when I bought it new(instructions/tools) I have 5 dies for it. 7/8” 1” 1-1/2” 1-3/4” and 2” The only die that has ever been used is the 1-3/4” die. Similar die sets on Tube Sharks website ... moresell for $2.350. Tube Shark sells the tube bender and dies separate. This bender has seen limited use and everything is in great working condition. I am also including my endmill notcher in this auction. It is easy to use and has a very strong 1.5 HP motor. It is mounted on a 1” solid billet steel stand. This baby is heavy. This type of notcher is a perfect compliment to the Tube Shark bender. I paid $3.500 for it new. Similar notchers are selling new here on eBay for over $4.000. These rarely come up for sale on eBay and now is your chance to own them. I have close to 10K in all this equipment, happy bidding. I won't be able to ship this due to the weight and i'm not sure how I could package this up. Email me if you have any questions. Here is some info from the Tube Shark website; TubeShark® Bender with Pneumatic Pump Power Unit TSA-2-1-0002 TubeShark® is perfect for the home shop. Fabrication shop, race car or aircraft builder. anyone who needs a practical and affordable precision tube bender. In the shop or in the field, TubeShark® produces quality bends in a wide variety of materials without distortion, equal to machines costing thousands more. Produce
You are buying a used sheet metal brake. It needs the adjusting bolts on the cam locks replaced. The previous owner did not keep the maintenance of this piece up an just used it. With a little care it will work great for you. Please ask questions before you buy it. THIS ITEM IS A LOCAL PICKUP ONLY! We will help you load it or you may have a shipping company pick it up at your expense. They will be responsible for for it's care from there. This item can be seen at. Ace Welding 2461 N Indianapolis Road Columbus. IN 47201
ENERPAC HYDRAULIC PIPE TUBE BAR BENDER 10.000 PSI + MANY DIES! ​ENERPAC HYDRAULIC PIPE TUBE BAR BENDER 10.000 PSI DIE SIZES INCLUDED. 3/4" 1/2" 1" 1-1/4" 1-1/2" 2" COMES AS SHOWN IN PHOTOS MAY BE TAKEN FROM THE STAND TO SAVE ON SHIPPING OVERALL MEASUREMENTS: 37" x 40" x 47" WEIGHT: 183 LBS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight ... morecharges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Brid
ERCOLINA MEGA BENDER 030 WITH TWO AXIS POSITIONER TONS SHOES AND FOLLOW BARS ERCOLINA MEGA BENDER 030 WITH TWO AXIS POSITIONER TONS SHOES AND FOLLOW BARS. THIS SET IS IN LIKE NEW CONDITION. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 ... more698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
RIDGID GEARED TUBE BENDER 368 MODEL 3-3/4" RADIUS 3/4" TUBE OD Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 RIDGID GEARED RATCHET TUBE BENDER Model: 368 3-3/4" radius to center of tube. 3/4" tube OD This item appears to be in good used condition. Refer to pictures for details. New, this item would cost over $430.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular ... moreitem or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our t
INECO QB76-VDM PIPE/ TUBE BENDER W/PLC CONTROL DATE OF MANUFACTURE: 2002 DATE OF PURCHASE: 2003 CAPACITY: 2 1/2" SCHD. 40 PIPE STEEL 1 5/8" SOLID S TEEL ELECTRICAL: 220V SINGLE PHASE DIES: 1 1/4" TUBING 4.4" CLR W/ BRONZE CB DIE 1 1/4" PIPE 5.31" CLR W/ BRONZE AND ERTHALON CB DIES 1 1/2" PIPE 5.9" CLR W/BRONZE AND ERTHALON CB DIES 2" PIPE 6.69" CLR W/ ERTHALON DIE PART& ACCESSORIES: SMALL& LARGE FORMER SHAFTS W/ BOLT CB DIE SWIVEL HOLDER CB EXTENDED HOLDER OWNERS MANUAL
This is an excellent operating frame straightener with a 22' deck. Three towers. Magna Rack III model. Please call Emil for more information- 404.992.2705 Item is located in Jonesboro. Ga.
Quote# 26827. 160" X 13 GA. RAS REINHARDT"FLEXIbend" CNC FOLDING MACHINE New 2004. Serial No 36/8, Model: FLEXIbend 73.40 EQUIPPED WITH: RAS System 6000 CNC Touch Screen Control"J"Shape Backgauge CNC Folding Beam Adjustment For Varying Thickness CNC Lower Beam Adjustment For Optimum Bend Radii Automatic Upper Beam Tool Clamping System CATALOGUE SPECIFICATIONS: Sheet Thickness. Maximum. 13GA 2.5MM. Working Length. Maximum. 159.8" 4060MM. Upper Beam Open Height. Maximum. 11.81" 300MM. CNC Folding Beam Adjustment. Maximum. 3.15" 80MM. CNC Lower Beam Adjustment. Maximum. 3.15" 80MM. Folding Beam Speed. 90 DEG/S. Upper Beam Speed. 1.575"S40MM/S. Backgauage Speed. 1.9 S. Upper Beam Drive Motor. 5.5 HP. Folding Beam Drive Motor. 5.5 HP. Machine Length. 203" 5155MM. Machine Width. 87.6" ... more2225MM. Machine Height. 70" 1775MM. Weight. Approximately. 11750 LBS. PRICE: F.O.B. ON WAY IN. $89.500.00. All Machines/Equipment subject to prior sell.
$21.000 to buy bender as-is* Pricing for the following quote and options can be discussed separately. Pyramid Tubular Technologies. Inc. 3214 S. Dye Rd. Flint. MI 48507 810-732-6335- 6” Eagle Bender Rebuild Quote*this quote will be in addition to the base price of $21.000* Bender Rebuild: 1. Bender Clean Up and Paint a. Perform an overview of the bender b. Degrease and clean machine c. Strip. Sand, prep and paint bender 2. Bender Mechanical a. Disassemble bend head. Bend arm, pressure die, mandrel, and POB to clean and repair as required, then re-assemble b. Inspect all rails and bearings on all assemblies and replace as needed c. Modify the C-Axis to bend 180 degrees d. Manufacture a 2-stack tube support 3. Add Y-Axis Push Assist 6.000 lbs. a. Remove and replace the Y-Axis rack. Pinion, gearbox, motor and drive b. Manufacture new gearbox ... moremounting bracket. And POB support system 4. Bender Electrical a. Replace all Indramat Electrical Components with Control Techniques Components i. New drives on the Y-Axis. B-Axis, and both X-Axis ii. New motors on the Y-Axis. B-Axis and both X-Axis iii. Power and feedback cables. Brake resistor kits, line reactors and motor adapters 5. Bender Hydraulics a. Clean out hydraulic reservoir. Repair all leaks, pressure test, and install new suction screens b. Replace all hydraulic piping and hoses as needed c. Inspect machine lube and repair as needed d. Modify or replace C-Axis cylinder to increase degree of bend to 180 6. Install new“BendPro G2 v2 Control” a. Current Tech“BendPro G2 V2 CNC” control 7. Bender Preventative Maintenance Program a. Pyramid Tube service technician will perform an annual preventative maintenance on the bender for the first year Bender Options: 1. Integrated Tube Shearing System a. Hydraulically powered single blade shear integrated with bend tooling up to.060 wall thickness. 6” OD 2. Turn Bang-Bang Z-Axis into a Hydraulic Servo Axis a. Add an encoder and proportional valve to both the mandrel and POB assemblies 3. Install a 2000 lb. hoist t
Just purchased and available for your inspection at our JV Partners warehouse in Cincinnati. Ohio is this"Excellent Operating" Kling# 1/2A. 3" X 3" X 1/2" Horizontal Angle Bending Roll, S/N 390641. Manufactured New in 1953. The rolls are equipped with Leg In- Leg Out Rolls and have been bending, less than capacity, 3" X 3" X 3/8" angle all of their life according to the owner of the Fab Shop we purchased them from. GENERAL SPECIFICATIONS Lower Roll Centers: 12" Roll Speed: 10 FPM Top Shaft Diameter: 4-1/2" Lower Shaft Diameter: 4" Roll Diameter: 11-3/8" Maximum Rolling Speed: 30 FPM BENDING CAPACITY Minimum Inside Diameters Material Size Leg In Leg Out Angles 3-1/2" x 3-1/2" x 3/8" 46" 30" Angles 3" x 3" x 1/2" 36" 28" Angles 2-1/2" ... morex 2-1/2" x 1/2" 34" 24" Angles 2" x 2" x 3/8" 30" 18" Angles 1-3/4" x 1-3/4" x 1/4" 28" 16" Angles 1-1/2" x 1-1/2" x 1/4" 24" 14" Angles 1" x 1" x 1/4" 18" 12" Channels 6" x 13 Lb. 36" 24" I-Beams 5" x 14.75 Lb. Easy Way 40" Flat Bars 6" x 1" On Flat 22" Flat Bars 2" x 1/2" On Edge 34-1/2" Square Bars 1-3/4" 22" Round Bars 2-1/8" 22" Pipe Std. Steel 2-1/2" 24" EQUIPPED WITH 10 HP Motor Guide Roller Leg-In Attachment Forward/Reverse Switch You can see this very nice machine tool under power at our JV Partners warehouse in Cincinnati. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Kling# 1/2A Horizontal Angle Bending Roll. Built with quality in the USA. Overall. A"Great Operating. Good Looking" Angle Bending Roll that is ready to go to work. The appearance speaks for itself(see photo's) If you need a real good 3" X 3" X 1/2" Angle Bending Roll. Don't pass up this opportunity. Y ou will have no regrets if yo
aims PITTSBURGH HEAVY DUTY COMPACT TUBING/ PIPE BENDER- 31980 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Pittsburgh. This is a used Heavy Duty Compact Tubing/ Pipe Bender in GREAT condition. Model# 31980 Specifications: Mounting Holes: 4) 1/2" Maximum Width of Stock: 1-15/16" Maximum Stock Thickness: 5/16" Maximum Bar Stock Diameter: 5/8" Overall Dimensions: 10" x 36" x 39" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PITTSBURGH HEAVY DUTY COMPACT TUBING/ PIPE BENDER- ... more31980 PITTSBURGH HEAVY DUTY COMPACT TUBING/ PIPE BENDER- 31980 PITTSBURGH HEAVY DUTY COMPACT TUBING/ PIPE BENDER- 31980 PITTSBURGH HEAVY DUTY COMPACT TUBING/ PIPE BENDER- 31980 Reliable Tool Inc. c 2011 | Powered by
aims NICE! PEXTO 24" x 16ga. BOX& PAN FINGER BRAKE- PX24-A read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Roper Whitney Co. of Rockford. Illinois. This a Box& Pan Finger Brake in GREAT condition. Model# PX24-A Serial# 970D Features: Light duty bending brakes are for light forming requirements(up to 16 gauge mild steel) When used within their rated capacity. They will form a minimum 1/2" flange over their entire length. The PX24 Box and Pan Brakes adjustable back gauge are ideal for small. Precise box and pan work(up to 3" deep) It will accommodate sheet metal up to 16 gauge. The PX24 will bend as much as a 135 degree angle in up to a 24-inch length. Fingers are heat-treated die steel. Precision ground. Set of fingers can be arranged to form ... more3/4: to 24" in 1/4" increments. Back gauge adjustment is from 0-18" Adjustable friction brake lock stops upper bar dead-weight drop and permits precise positioning of upper bar to scribed line on workpiece before final clamping. The pan brakes have optional special fingers to adapt them to inside mitered lip boxes. 9" long square tubes and radius bends up to 1" Minimum 1/4" PX24) reverse bends are possible with these light duty brakes by removing both the apron angle iron work support and apron filler plate and reducing the capacity by four gauges. Specifications: Capacity(Mild Steel) 16 gauge. Maximum Bending Length: 24" Maximum Jaw Opening: 1" Maximum Bend Angle(past horizontal) 45 degrees. Minimum Flange Bend: 1/2" Minimum Reverse Bend: 1/4" Fingers Included: 1) 3/4" 1) 1" 1) 1-1/2" 1) 1-3/4" 2) 3" 2) 6" Overall Dimensions: 40" x 32" x 41" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auct
$70.000 to buy bender as-is* Pricing for the following quote and options can be discussed separately. Pyramid Tubular Technologies. Inc. 3214 S. Dye Rd. Flint. MI 48507 810-732-6335. electric C-Axis. Bend arm, and POB internal components not shown, but are included] Specifications Max tube size(stainless steel) 3" 76mm) OD x.125" 3.175mm) wall, Max center-line radius 8" or per customer specifications, Max Y-Axis speed(DBB) carriage travel 3.000 inches per minute, Max B-Axis speed(POB) plane of bend 450 degrees per second, Max C-Axis speed(DOB) degree of bend 180 degrees per second, Max bend angle DBB Accuracy: +/ 001 inches POB Accuracy: +/ 05 degrees DOB Accuracy: +/ 02 degrees, Max tube length over mandrel 108 inches or per customer specifications, Working height 52 inches, Bend arm motor horsepower 40HP, Service required ... more440- 480 volts. 3-phase, 60 Hz, Quote for Rebuild* not included in"as-is" price. Call to discuss) 1. Bender Clean Up and Overview Perform an overview of the tube bender, Degrease. Clean and paint machine, 2. Bender Mechanical Disassemble bend head. Bend arm, pressure die, mandrel, and POB as required to clean, repair, paint and re-assemble, Replace all rails and bearings on all assemblies, 3. Bender Electrical. Re-wire machine complete, Clean all electrical panels, Replace all limit switches, Replace all proximity switches, Replace all flexible conduit, Inspect encoders, 4. Bender Hydraulics. Replace all hydraulic valves, Inspect hydraulic motors, Inspect hydraulic pump, Inspect machine lube, Replace all hydraulic hoses, 5. Replace Baldor servos with Control Techniques components. New drives on the Y-Axis. B-Axis and C-Axis, New motors on the Y-Axis and B-Axis, Power and feedback cables. Brake resistor kits, line reactors and motor adapters, 6. Install new"BendPro G2(v2) Control" New BendPro G2(v2) control system for multi-axis. Single stack CNC bender, 7. Additional Options. Supply guarding around bender, Sick laser scanner to provide operator protecti
SKU: 639833 A: 0015000000lqdLz O: 0065000000MjtbW PA: View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Ram-Pac Large Hydraulic Pipe Bender in good condition. This unit features a 50 ton hydraulic ram. 3 phase electric pump, 2 1/2" 6" pipe capacity, 1" thick steel construction, and 2 forming dies. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Ram-Pac ... moreModel: 2 1/2" 6" Serial Number: Pump serial is HEP-760-4-5 Shipping Weight: Approx 2.100 lbs Shipping Dimensions: 108"L x 100"W x 30"H Features: 50 ton hydraulic ram 3 phase electric pump 2 forming dies Hydraulic hose 1" heavy steel plate construction Heavy caster wheels for portability Condition: Unit appears to be in good overall condition Hydraulic hose has some cuts and wear 3 phase pump is untested but last known to be working Unit is in good overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: Buyers will
SKU: 2316077 A: 0013000000CXCfg O: 0065000000NKPbK PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Lockformer Hydraulic Roll Former Metal Bender 12" Throat 8" Bore- 460V/3PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Lockformer Model: Unknown Type: Metal Roll Serial No: Unknown Features/Specifications: ... moreCunningham Model AP hydraulic cylinder Bore: 8" Stroke: Unknown(figure on data plate is obscured) Also labeled: American Fluid Power Baldor Electric Motor 2 HP- 208-230/460V- 6.6-6.4/3.2A 1725 RPM- 60 Hz- 3 PH Throat: 12" to edge of shield. 16.5" to end of roll tooling) Shaft Diameters: 2" Fixture/Tooling Diameters: 4.25" Norgren pressure gauge: 0-160 psi Allen-Bradley power cabinet& control box Dimensions& Weight: L 47" x W 30" x H 67" Shipping Weight: 1.450 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maint
Baileigh tube bending dies. 1/2. 3/4, 1, 1 1/4, 1 1/2. Pipe Dies all in good shape. This auction is for one set of dies only but a bulk purchase for all the dies is available.
USED ERCOLINA CE100 RING ROLL YEAR: 2012 THIS MACHINE IS LIKE NEW. ITS A 2012 MACHINE THAT WAS A BANK REPO IN GREAT SHAPE! Specifications: Roll shaft diameter: 100mm Center roll position Hydraulic/ 30 tons Maximum pipe capacity: 4” Schedule 40(special tooling required) Maximum angle capacity: 4” x 4” x ½” Universal tooling: Included– 12-5/8” O.D. Programming: NC-Touch Pad Number of programs: 8 Roll shaft speed: 6 RPM Operating position: Horizontal or Vertical Twist correction: Yes/Hydraulic Foot pedal stand: Yes w/ joystick Operating voltage: 220/440V 3 phase. Currently 220 volt Drive motor“upper”1) 2-1/2 hp into planetary Drive motor“lower”2) 2 hp into planetary Hydraulic pump: 2.6 hp Distance between shafts: 19-1/4” Weight: 5.500 lbs Dimensions: 66” L x 58” W x 83” H Features: Bending speeds 20% faster than competitive machines Forged ... moreroll shafts precision ground and fitted for maximum performance and minimum deflection Heavy duty structure and rigid components for high section modulus ratings Patented by Ercolina; simultaneous downfeed and roll movement to minimizes deformation Programmable touch pad controls with digital center roll positioning display Universal tooling set included Memory storage with eight individual programs and unlimited passes Remote control pendent with low voltage controls and foot pedal switch Threaded roll shafts with micrometric flange adjustment helps eliminate spacer usage Manual anti-twist correction system for angle iron leg“IN” applications Inline direct drive roll shaft system Three axis hydraulic anti-twist system for angle iron“Leg In” applications Check out my! We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact us. 800 899 8182 ext. 208 PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please cal
Please Refer To Machine# 944862 Winton RD25 T7301 Tube Machinery(Miscellaneous) Typical Dia. Capacity 25mm. Manufacturer Winton. Model No. RD25. Serial No. 757. Year Mfg. 2010. Cut Length PPH Features/Accessories NC. Bending Powered bend head with programmable degree of bend. Condition Like New. Comments Immediately Available. FOB Point Elk River. MN.
Please Refer To Machine# 944892 Winton CTL23PA T7301 Tube Machinery(Miscellaneous) Typical Manufacturer Winton. Model No. The CTL-23PA is a free standing tube cutoff machine that automatically feeds and cuts from a bulk spool of tubing(level wound spool) or straight lenghts. Designed for production. The CTL-23PA automatic tube cutter makes use of two backup rolls and(1) c. Serial No. 755. Year Mfg. 2010. Type/Description 3/4" Tooling with machine. Features/Accessories Motor HP Condition Like New. Comments Immediately Available. FOB Point Elk River. MN. Price
aims HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hossfeld Manufacturing Co. This is a Disassembled Universal Hydraulic Tube& Pipe Bender. Hydraulic unit powers up fine. Everything appears to be there. Unfortunately. Due to an influx of new inventory, we do not have time to sit here and piece the bender back together. Great opportunity for a repair project for someone with the time and knowledge. See if this can work for you. Happy Bidding! Model# 2 Serial# B-42779 Specifications: Bends Following Materials: Round Tube. Square Tube, Schedule 40 Pipe, Rectangle Tube, Angle Iron, Flat, Bar, Handrail, Scrolls. Maximum Round Capacity: 2" OD. Maximum Square Capacity: 1-1/2" Maximum Schedule ... more40 Capacity: 2" Pump Motor: 1 Horsepower. 115/208-230 Volt, 1,725 rpm, 12.8/6.4 Amp, 60 Hz, Single Phase. Electrical: 115 Volt. Single Phase. Overall Dimensions: 64" x 43" x 45" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED HOSSFELD UNIVERSAL HYDRAULIC TUBE& PIPE BENDER- DISASSEMBLED Reliable Tool Inc. c 2011 |
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 21919 DiAcro Hydraulic Bender MODEL: No. 6 SERIAL NUMBER: GENERAL SPECIFICATIONS Bending Speed: 6 to 12 RPM Hydraulic Cylinder Bore: 3-1/2" Radius Capacity: 9" Maximum Degree of Bend: 280 Degrees Hydraulic Pressure: 1000 P.S.I. Angle: 1/8" x 1" x 1" Channel: 1/8" x 1/2" x 1" MATERIAL CAPACITY Steel Tubing-16 Gauge: 1-1/4" O.D. Standard Iron Pipe: 3/4" I.P.S. Flat Steel Bar-Edgewise: 1/4" x 1" EQUIPPED WITH 3 HP Motor Approximate Weight: 1000 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be ... moresold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a m
Florida Hydraulic Industrial RE-CONDITIONED 115V AC Custom Power Unit used in Metal Working. Pipe Bending(JD2 Compatible) Agriculture and Farm Applications. Specifications: Motor- 115/208-230VAC; 17.8/9.0- 8.9 Amps; 60 Hz 3450 RPM; 1PH; 1.5HP; 56FR; Continuous Duty; TEFC Pump- A.F.C. 0.8 CC/REV. 049 CU.IN.REV. Relief- Adjustable Relief Valve Set At 4300 P.S.I. Endhead- 3/8 NPTF Pressure-Return Port(2) 3/8-16 Tap x 1.38 Deep Mounting Holes D03 Valve Manifold Block with 9/16 SAE Ports"A" and"B" Tank- Plastic 1.0 Gallon(193 CU.IN. Usable) Horizontal Mount With Breather-Fill Port Valving- Relief Valve Wiring- 115 VOLTS AC Unit Performance- 0.57 GPM AT 4000 PSI AT 115 VOLTS AC& 18 AMPS AT 45 CENTISTOKES(200 SSU) The C1014C Cylinder is used in the JD2 Pipe Bender. Hose assembly included- 3/8 ID 10.000psi rated hose w/6SAE ... morePower Unit connection, and male plug Quick Connect(Compatible with Enerpac and Power Team cylinders) We have designed units for 220V(Australia. UK) as well as multiple function units(Cow Tippers) Call us at 1-866-206-9381 if you have any questions. Please call us directly for International Orders 1-352-291-0160 Check out my other items! Be sure to add me to your!
aims CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Roper Whitney- Pexto. This is a Manual Slip Roller in GREAT condition. Model# 381-D Serial# 77939-00 Work rolls are manufactured of precision turned and ground high carbon steel. 2" diameter rolls with wiring grooves and fully enclosed gear housings. Upper roll lifts for convenient removal of workpiece. Specifications: Capacity(Soft Steel) 22 gauge. Maximum Sheet Width: 36" Roll Diameter: 2" Wiring Grooves: 3/16" 1/4" 5/16" Overall Dimensions: 49" x 14" x 13" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable ... moreTool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D CLEAN! RW PEXTO 36" x 22ga. MANUAL SLIP ROLLER- 381-D Reliable Tool Inc. c 2011 | Powered by
QUOTE# 26941. 13' LVD 150-TON 5-AXIS CNC HYDRAU LIC PRESS BRAKE W/CROWNING New 2003. Serial No 28839, Model 150BH13, Type PBEB135/40 EQUIPPED WITH: LVD"Cadman" 5-Axis CNC Control Crowning Adjustable Stroke Lazersafe Guarding System CATALOGUE SPECIFICATIONS: Tonnage Capacity. 150 TONS 1350 KN Overall Bed Length. 14'5" MM Overall Ram Length. 13'1" 4000 MM Working Length. 13'1" 4000 MM Distance Between Housings. 10'4" 3150 MM Table Width. 7" 180 MM Stroke. Maximum. 7.87" 200 MM Distance Table to Ram. Maximum. 15.75" 400 MM Throat Depth. 15.75" 400 MM Speeds. Advance. 5.1 IPS 130 MM/S Speeds. Press. 47 IPS 12 MM/S Speeds Return. 4.5 IPS 115 MM/S Back Gauge Stroke. X-Axis. 23.6" 600 MM Hydraulic Pump. Horsepower. 15 KW Weight. Approximately. 23200 LBS. PRICE: F.O.B. OUR ... moreWAREHOUSE. $69.500.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13fefe298a9-0xff-
QUOTE# 26945. 14' LVD 240-TON 7-AXIS CNC HYDRAULIC PRESS BRAKE W/CROWNING New 1993. Serial No 20652, Model 240/14 PPI-MNC95, Type PPI 220/42 MNC95C EQUIPPED WITH: LVD#MNC95C 7-Axis CNC Control Crowning Adjustable Stroke Large Quantity of Upper& Lower Dies CATALOGUE SPECIFICATIONS: Tonnage Capacity. 240 TONS 2200 KN Overall Bed Length. 14"2" 4318 MM Overall Ram Length. 13'9" 4200 MM Working Length. 13'9" 4200 MM Distance Between Housings. 12'4" 3760 MM Table Width. 7" 180 MM Stroke. Maximum. 7.87" 200 MM Distance Table to Ram. Maximum. 17.72" 450 MM Throat Depth. 11.81" 300 MM Speeds. Advance. 3.15 IPS 80 MM/S Speeds. Press. 33 IPS 8.4 MM/S Speeds Return. 3.4 IPS 86.4 MM/S Hydraulic Pump. Horsepower. 24.2 HP 18 KW Weight. Approximately. 37050 LBS. PRICE: F.O.B. OUR WAREHOUSE. ... more$69.500.00. ALLMACHIBES/EQUIPMENT SUBJECT TO PRIOR SELL.
Keins CNC KB-15-NW Tube Bender COMCO KB Series Specifications Model KB-15 Bending capacity Tube(Pipe) OD x t) 19.1 x 1.2 16 x 1.6 Nonferrous metal 22.2 x 1.0 Stainless steel 19.1 x 1.2 Steel bars 6 Square pipe- Maximum bending radius(mm) 60 Bend radius differential(mm) 30 Maximum pipe length(mm) 1500 CNC control axis 3-axis AC servo Speed Feed speed(mm/sec) 120 ∼ 1200 Plane speed(°/sec) 36 ∼ 360 Bending speed(°/sec) 25 x 260 Accuracy Feed accuracy ±0.05mm Plane accuracy ±0.05° Bending accuracy ±0.05° Dimensions L 2600 W 810 H 1220 Weight kg 1050 Electric capacity kw 7 If you have any questions please contact us at 866-803-5202 or 714-892-9800 I f you need a shipping quote please contact Tim at Abba Freight 866-779-9350 or tims@abbafreight.net Dimensions: 94in x 3ft x 5ft Weight: 1050
WEBB 9L-1206 INITIAL PINCH PLATE POWER ROLL 6’ X ¾” CAPACITY Description: Up for sale is a Webb 9L-1206 initial power pinch plate roll. This pinch plate roll is in great working and operating condition. It features 6’ long rolls that are 12” in diameter. And can bend up to ¾” thick steel. It also features power front and rear roll elevation, pneumatic drop end, central grease station, and a modern dead man safety switch. This machine is currently located in our indoor facility in San Leandro. CA. To make an appointment to see this machine under power please call Gary Aragon at(510)453-0513. A video of the machine under power can be seen below. SPECIFICATIONS MANUFACTURER WEBB MODEL 9L-1206 SERIAL 7375 CAPACITY 6’ X ¾” YEAR 1973 FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON ... moreAT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder
Wysong Press Brake. Model# 55-8, 55 ton machine, 120" long, 102 between uprights, 8" throat, has penumatic palm buttons and pneumatic foot peddle to operate, press under power, 220 volt, 3 ph, have instruction manual. With parts list, eccentric shaft bearings worn, press runs under own power now, weight is about 11000 LBS buyer to pay all moving expences
aims DI-ACRO 24" HEAVY DUTY CLEAT BENDER/ FORMER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Di-Acro. This is a used Heavy Duty Cleat Bender/ Former in good condition. Specifications: Forming Width: 24" Overall Dimensions: 31" x 20" x 43" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DI-ACRO 24" HEAVY DUTY CLEAT BENDER/ FORMER DI-ACRO 24" HEAVY DUTY CLEAT BENDER/ FORMER DI-ACRO 24" HEAVY DUTY CLEAT BENDER/ FORMER DI-ACRO ... more24" HEAVY DUTY CLEAT BENDER/ FORMER Reliable Tool Inc. c 2011 | Powered by
aims LOCKFORMER 24" HEAVY DUTY CLEAT BENDER/ FORMER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Lockformer. This is a used Heavy Duty Cleat Bender/ Former in good condition. Specifications: Forming Width: 24" Overall Dimensions: 31" x 20" x 43" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOCKFORMER 24" HEAVY DUTY CLEAT BENDER/ FORMER LOCKFORMER 24" HEAVY DUTY CLEAT BENDER/ FORMER LOCKFORMER 24" HEAVY DUTY CLEAT BENDER/ ... moreFORMER LOCKFORMER 24" HEAVY DUTY CLEAT BENDER/ FORMER Reliable Tool Inc. c 2011 | Powered by
Tennsmith 36" metal fabrication Roll Former. Cheek Roller, used, in excellent condition. Local pick up or arrange your own shipping. Located south of Chicago conveniently located close to I-57 and I-294.
PLEASE NOTE: Inspection encouraged as there is no 30 day return on this item! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a VERY NICE 650 Ton Cincinnati Press Brake. App 10' Between Housings, 12" Maximum Stroke. Machine was manufactured in 1995, good operating condition! Email for more information or video! Please check out our Feedback, we are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. We are currently getting exact cost. But estimate is $5000 +. OUR RETURN POLICY. Inspection encouraged as there is no 30 day return on this ... moreitem! Good Luck.
Kansas Jack WORLD RACK 2001 Frame Machine- 18ft. long 2- 10 Ton Pulling Towers Pinch Weld Clamps Ramps Pump and other accessories Picture is NOT of the actual unit- Pictures shows three towers. My unit only has 2 towers
WORKS GREAT. BOTH IN GOOD CONDITION. COMES WITH EXTRA MATERIALS. I OWN A ROOFING COMPANY IN MIAMI. T& S ROOFING SYSTEMS. WE PURCHASED IT FOR OUR BUSINESS FOR 10K BUT NEVER USED IT. IF YOU HAVE ANY ADDITIONAL QUESTIONS SEND ME AN EMAIL. The 1700 K5 seamless gutter forming machine produces 5" K-Style seamless gutters. With the K-5. You get the quality, features and engineering that have made these roll formers the most trouble-free machines in the industry. It not only transports easily, but there are also removable sides for easy access. Comes inside of a Lark enclosed trailer with a steel frame and aluminum skin. The trailer has side by side doors in the rear. A side door, roof rack with ladder included and shelves inside for storage. Trailer also has a roof vent.
aims DI-ACRO 24" x 16ga. HEAVY DUTY BOX& PAN FINGER BRAKE- 4 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Di-Acro This is a Heavy Duty Box and Pan Finger Brake in good condition. Model# 4 Flexibility is the key to the Di-Acro finger brakes. Several adjustments provide convenient and economical forming of simple flanges to multiple-sided products such as chassis and boxes. Segmented fingers from 3/4" 19.05mm) to 6" make it possible to fabricate at full width of the machine or in increments as small as 1/4" 6,35mm) Specifications: Maximum Capacity(Mild Steel) 16 ga. Maximum Forming Width: 24" Clearance Thru Top Opening: 3/4" Maximum Depth of Box or Pan: 3" Minimum Reverse Bend: 1/4" Maximum Angle Bend(one operation) 135 ... moredeg. Fingers Included: 1) 3/4" 2) 1-1/4" 2) 3" 2) 6" Overall Dimensions: 40" x 39" x 12" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DI-ACRO 24" x 16ga. HEAVY DUTY BOX& PAN FINGER BRAKE- 4 DI-ACRO 24" x 16ga. HEAVY DUTY BOX& PAN FINGER BRAKE- 4 DI-ACRO 24" x 16ga. HEAVY DUTY BOX& PAN FINGER BRAKE- 4 DI-ACRO 24" x 16ga. HEAVY DUTY BOX& PAN FINGER BRAKE- 4 DI-ACRO 24" x 16ga. HEAVY DUTY BOX& PAN FINGER BRAKE- 4 Reliable Tool Inc. c 2011 | Powered by
SKU: 2474120 A: 0013000000CXCfg O: 0065000000OTlaX PA: View Photo Gallery. Request Freight Estimate. Location: Everett. WA 98204 Item Description. This is a no reserve auction for an Eaton Leonard Vectorbend 1/2" Hydraulic CNC Tube Bender VB-50-HP-LH w/EL-2000 Control. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. This item is located on Boeing property in Everett. WA. Rigging charges for professional ... moreremoval will apply. Please see details below. Overview: Make: Eaton Leonard Model: VB-50-HP-LH Type: CNC Tube Bender Serial No: VB-50-HP-L-015-MTL-11-88 Hours: 45294.5 Features/Specifications: Capacity: 1/2" diameter Control: Eaton Leonard EL-2000 Motor: 5 HP- 460V- 10A 60 Hz- 3 PH Includes STI safety mat system w/control Dimensions& Weight: L 198" x W 32" x H 50" Shipping Weight: 10.000 lbs(estimated) Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Cylinder previously connected to the follower is disconnected& a tension spring is used in it's place(see photos) Some EPROM modification noted by shop- no further information available Rigging& Removal: This equipment is sold"as shown" at a production facility owned by The Boeing Company in Everett. WA. The successful bidder will be required to have the equipment removed from Boeing property by Tuesday. September 24th, 2013. The high bidder is responsible for removal. Shipping, and transportation costs. Only Boeing approved riggers will be allowed to remove and load these machines. Please click"Ask A Question&
SKU: 2474374 A: 0013000000CXCfg O: 0065000000OVBWS PA: View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for an Eagle EPT-10 CNC Tube Bender 10MM Automatic Bending Machine w/Xycom Control. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Eagle Precision Technologies Model: EPT-10 Type: Tube Bender Serial No: 95-894 Hours: ... moreUnknown Features/Specifications: Max. Tube OD: 10 mm(0.4" Control: Eagle Xycom CNC control VMEbus system XVME-677 cpu XVME-955 drive module XVME-113 memory module 6008-SV I/O scanner Power: 7.5 HP- 480V 60A(service) 31A(full load) 60 Hz- 3 PH Allen-Bradley AC Servo Controllers for Y/B/C axes Cat No: 1391B-AA15 Allen-Bradley remote I/O adapter unit Note: We do not have any further specifications for this unit Dimensions: Machine Overall: L 147" x W 44" x H 64" On Pallet(as shown) L 222" x W 44" x H 78" Machine Weight: 4.000 lbs(estimated) Condition: Very Good- working at time of decommission Normal wear from previous use in working industrial production environment Regular. Thorough maintenance performed by previous owner since new Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report
aims CENTRAL 12-TON HYDRAULIC PIPE BENDER- 32888 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Central Hydraulics. This is a used Manual Hydraulic 12-Ton Pipe Bender in GREAT condition. Model# 32888 Specifications: Capacity: 12 Tons. Ram Diameter: 1-3/4" Ram Travel: 9-1/2" Die Sizes: 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Bending Bar Adjusting Distances: 8-1/2" 11-1/4" 12" 16-3/4" 19-1/2" 22-1/4" Overall Dimensions of Frame: 24" x 5" x 22" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great ... moreDeals! Bidding starts at a dollar with no reserve. CENTRAL 12-TON HYDRAULIC PIPE BENDER- 32888 CENTRAL 12-TON HYDRAULIC PIPE BENDER- 32888 CENTRAL 12-TON HYDRAULIC PIPE BENDER- 32888 CENTRAL 12-TON HYDRAULIC PIPE BENDER- 32888 CENTRAL 12-TON HYDRAULIC PIPE BENDER- 32888 Reliable Tool Inc. c 2011 | Powered by
Rexon 12 Ton Manual Pipe Bender Bending Machine*TAX INVOICE INCLUDED IN ALL PURCHASES* PLEASE READ* By participating in the sale or auction. You have read and agreed to ALL of our terms and conditions. For more information. Please click on the below links. Terms& Conditions Payment Packing& Handling National Postage International Postage Returns Warranty Feedback Overview On offer is a Rexon 12 Ton Manual Pipe Bender Bending Machine Sale includes 1 x Rexon 12 Ton Manual Pipe Bender Bending Machine Condition Item is used but in great working order when it was removed from service. Overall conditions is very good. The images in the listing are of the actual item you will receive. The unit has been tested and is in great working order. There are minor cosmetic blemishes on the case but it doesn't affect it's performance. Additional ... morephotos are available upon request. All offers(if available) are welcome! Please submit them through the Best/ Make Offer option* Don't forget to view our other items to take advantage of our combined postage option and further your savings! National Postage from Brisbane. Australia We do complete door-to-door service and all items are tracked for your protection Due to the nature of the item. Local pickup(south west Brisbane) is much preferred. For all remote buyers. Please contact us for a quote. International Postage from Australia Please contact us for a quote Please be advised that we only send via Registered Post(Air) International(Australia Post) Express Post International(Australia Post) or TNT Express with tracking and signature on delivery Terms& Conditions Payment Packing& Handling National Postage International Postage Returns Warranty Feedback SP16101 MN_gsrx_vers_525(GS 6.6.5(525)
Don't buy a machine that has been used and abused. This machine. Although used, has had very little hours put into it. Get a great machine at a great price with all of the tools you need to get working right away. It has thousands of dollars of dies included, all at one low price. This machine is powerful. 65 Tons of force and 5 stations. Get the right machine for the job, and save thousands by buying this machine. You can pick it up locally if you like. Or we can arrange freight for you and get it to your location, buyer pays shipping costs, which will be added at the end of the sale based on the cost to your location. You may also arrange your own freight if you'd like, also paid by you. PUNCH Rating, 65 Tons, Max. Capacity, 1-1/16" Dia. in 3/4" A36(65.000 PSI Tensile) Stroke, 1-3/8" Throat Depth, 9-3/4" Open ... moreHeight, 8-1/8" Shut Height, 6-3/4" Work Height, 36" FLAT BAR SHEAR Max. Width, 3/8" x 24" Max. Capacity, 1/2" x 14" or 1" x 4" Max. Round, 1" Max. Square, 1" Work Height, 33-1/2" ANGLE SHEAR Max. Capacity, 5" x 5" x 1/4" or 4" x 4" x 3/8" Work Height, 42" COPER NOTCHER Max. Capacity, 2-1/2" x 6" x 3/8" Work Height, 35-1/2" OPEN CAVITY Width, 11-1/2" Height, 9-3/4" Work Height, 42" GENERAL SPECIFICATIONS Standard Motor, 7.5 HP 3 Phase 208/240v 1765 RPM 21 AMP, Optional Motors, 7.5 HP 3 Phase 440/480v 1765 RPM 12 AMP 7.5 HP 3 Phase 575v 1770 RPM 8 AMP 5 HP 1 Phase 208/240v 1725 RPM 26 AMP*7.5 HP 1 Phase 208/240v 1765 RPM 36 AMP*Required for 1 Ph Hydraulic Accessory Pack Hydraulic Pump, 10-1/2 GPM- 2 Stage, Valve Pressure, 3500 PSI, Reservoir, 17 Gallons, Cylinder, 3-1/2" Ram, DIMENSIONS Base, 43" x 42" Height, 55" Shipping Weight, 4220 lb*specs above provided by manufacturers website
aims HUTH PORTABLE TUBE/ PIPE EXPANDER/ SWAGER MACHINE- 1673 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Midas-International Corp. Huth. This is a used Portable Tube/ Pipe Expander/ Swager Machine in GREAT condition. Model# 1673 Serial# 224 Retails for over $4.500.00! Huth's Model 1673 Portable Swager/Expander equips you to form ball joints. Slip joints, flares and flanges and perform doming and reducing anywhere in your shop. This tubing expander and reducer has 25,000 lbs of power provided by 5 HP electric/hydraulic pump. It is also equipped with the Huth Accu-Sizer system which is an automatic preset expanding system that allows precise expanding every time. Expanding and beading capacity ranges from 1" to 5-1/2" additional tooling required) And tube swaging, ... morereducing, and flaring capacity up to 3" OD. Mounted on its own easy-wheeling cart with heavy duty casters and a 15 foot power cord. This machine is great for end forming mild steel, aluminum, stainless steel, black pipe, and tubing. Features: 25.000 pounds of expanding power. A 3-1/2" cylinder. Expanding capacity from 1" to 5-1/2" Features Huth's Accu-Sizer system. Adjustable Collar for expanding 1" to 3-1/2" Collet Holder for 1" to 2-1/2" O.D. tubing. Swaging capacity from 1" to 3" Front swivel caster with brake. Specifications: Motor: 5 Horsepower. 208-230/ 460 Volt, 1,740 rpm, 23-21 Amps, 60 Hz. Electrical: 208-230/ 460 Volt. Three Phase. Overall Dimensions: 46" x 19" x 40" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HUTH PORTABLE TUBE/ PIPE EXPANDER/ SWAGER MACHINE- 1673 HUTH PORTABLE TUBE/ PIPE EXP
This is a USED USA made Chicago D& K 10ft x 14 Gauge Floor Brake. This brake has a good nose bar and is tight. Came out of Sheet Metal shop that really took good care of the machines. This Brake is Not an Import but made in the USA unlike the new Chicago's. Rated by Chicago D& K 10' x 14 Gauge Mild Steel. 10' x 18 Gauge Stainless KY SALES TAX WILL APPLY IF BUYER PICK UP MACHINE AT OUR FACILITY Questions
aims DREIS& KRUMP CHICAGO 48" x 16ga. BOX& PAN FINGER BRAKE- 416 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Dreis& Krump. This is a used Chicago Box& Pan Finger Brake in working condition. Model# 416 Specifications: Maximum Bending Length: 48" Capacity(mild steel) 16 gauge. Capacity(stainless steel) 18 gauge. Shut Height: 1-1/2" Overall Dimensions: 74" x 28" x 58" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DREIS& KRUMP CHICAGO 48" x ... more16ga. BOX& PAN FINGER BRAKE- 416 DREIS& KRUMP CHICAGO 48" x 16ga. BOX& PAN FINGER BRAKE- 416 DREIS& KRUMP CHICAGO 48" x 16ga. BOX& PAN FINGER BRAKE- 416 DREIS& KRUMP CHICAGO 48" x 16ga. BOX& PAN FINGER BRAKE- 416 Reliable Tool Inc. c 2011 | Powered by
ROTO-DIE HYDRAULIC BENDER- MODEL 15: S/N 81971 Max. Capacity 3/8" Die Opening: 18 Gage x 10' Max Capacity 7/8" Die Opening: 14 Gage x 10' Max Capacity 1/2" Hemming Die Opening: 20 Gage x 10' With Autogauge CNC150
aims HEAVY DUTY 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- 130-5061 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a used Manual Box and Pan Finger Brake in GREAT condition. Model# 130-5061 Serial# 0403344816-24 Specifications: Capacity(mild steel) 16 gauge(1.5 mm) Maximum Forming Width: 48" Shut Height: 1-3/4" Minimum Reverse Bend: 5/16" Maximum Box Depth: 3" Fingers Included: 5) 2" 6) 3" and(4) 4" Overall Dimensions: 57" x 17" x 44" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts ... moreat a dollar with no reserve. HEAVY DUTY 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- 130-5061 HEAVY DUTY 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- 130-5061 HEAVY DUTY 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- 130-5061 HEAVY DUTY 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- 130-5061 HEAVY DUTY 48" x 16ga MANUAL BOX& PAN FINGER BRAKE- 130-5061 Reliable Tool Inc. c 2011 | Powered by
aims DI-ACRO 24" x 20ga. MANUAL HAND OPERATED SLIP ROLLER- 24 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Di-Acro. This is a used Manual Hand Operated Slip Roller in GREAT condition. Model# 24 Features: Di-Acro Slip Rollers feature a cam-actuated idler roller which permits the operator to locate bends at any point along a sheet of material with straight sections on one or both ends. The idler roller always returns to its present position. Allowing duplication with a high degree of accuracy. Calibrated rear roller indicators enable the operator to quickly adjust the machine when changing from one rolling size to another. Small circles. Approximately the same diameter as the forming rolls, can be produced in one operation.Circles of any larger diameter can ... morebe formatted in just two passes through the rolls. Specifications: Capacity(Mild Steel) 20 gauge. Maximum Sheet Width: 24" Roll Diameter: 2" Minimum Radius: 1" Maximum Radius: No Limit. Overall Dimensions: 34" x 11" x 13" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DI-ACRO 24" x 20ga. MANUAL HAND OPERATED SLIP ROLLER- 24 DI-ACRO 24" x 20ga. MANUAL HAND OPERATED SLIP ROLLER- 24 DI-ACRO 24" x 20ga. MANUAL HAND OPERATED SLIP ROLLER- 24 Reliable Tool Inc. c 2011 | Powered by
BODY REPAIR JACK American Hydraulics Model PP4 4 Ton Porta Power Prev Stop Play Next This is a working hydraulic body jack. It is in good condition. It does have grease and oil on it and some scratches and dust. It has several attachments and the box has a dent on the back side of it. Please supersize all images as they are considered part of the description. Smoke free home. It has not been cleaned or polished for images. Expedited shipping is 2-3 days USPS with tracking number that will be posted on the listing the day it is shipped. Thank you! Please ask questions or request more photos before bidding. All items are described to the best of my ability. If I mistakenly misrepresent any item in description or photo. Any issues will be resolved quickly. Payment is due within 5 days of the end of the auction. I ship Mon. Weds& Fri except ... moreholidays. Thanks!
Strippit 30/30 CNC Turret Punch new 1971 CNC Retrofitted in 1989 with CNC Control 30 Ton Punching Capacity 1.00" Round in 1/4"Mild Steel 3.5" Round in 12 Gauge Mild Steel 30.00" Throat Depth 39.00" Die Height From Floor 5/8" Stroke 5 15/32" Shut Height 2.25" Vertical Table Adjustment 220V/3P/60 hz Machine Weight 7.000 lbs. Equipped With: Northern Control Systems MTC-700 CNC Control Tape Reader. Control Manual ON OUR FLOOR IN KENOSHA. WI PHOTO'S IN LISTING TAKEN PRIOR TO REMOVAL FROM SHOP. AS TAKEN FROM SERVICE. NOT UNDER POWER IN OUR FACILITY, SOLD"AS IS" eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an ... moreitem on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. SOLD"AS IS" AS PICTURED. PAYMENT IN FULL PRIOR TO SHIPPING. WE WILL LOAD THIS ON YOUR TRUCK OR YOU CAN PICK THIS ITEM UP FROM OUR WAREHOUSE IF YOU ARE LOCAL TO THE IL/WI BORDER SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and we'll be happy to help. Buyer to verify all specifications and options prior to purchase. Buyer responsible for shipping charges to end destination. Meridian Machinery is located in Kenosha. WI. We are a half hour south of Milwaukee and an hour and a half north of Chicago. The closest airport is Milwaukee's Mitchell Field, about 20 minutes away. For private aircraft, Kenosha Airport is across the street, code ENW. Meridian Machinery. Inc. is a stock deale
For Sale is a Wysong Model D-60 Powered Initial Pinch Plate Roll. It is rated at 60" of 1/4" mild steel. The rolls I would rate at a 8.5-9. As the are smooth with very minimum wear. No grooves for rod. This was under powered and working until it was taken out of service and replaced with a 6' Roll. It is equipted with the quick stop foot brake. Air drop end and oiling system. 3 phase powered required. All Shipping charges and setup will be completely up to the buyer, we can load this unit on a truck. It is approximately 96" long x 60" wide x 48" tall and weighs about 4-5,000 lbs. Any questions,Please feel free to email or Call 715-246-9665 Tom Jr.
TODAY UP FOR SALE IS A LARGE EATON LEONARD VECTORBEND METAL TUBING BENDER. THIS MACHINE IS USED. WE ACQUIRED IT THROUGH AN ESTATE SALE. I BELIEVE IT WAS USABLE WHEN THE OLD MAN STORED IT. I BELIEVE IT COULD BE MADE TO WORK ALTHOUGH THERE MAY BE SOME MISSING PARTS. THANK YOU FOR LOOKING ANY QUESTIONS PLEASE ASK!
Specifications Model 2300 Motor size 3 H.P. Current type 208/220/440 volt. 3 phase, 60hz Gauge cap. material Aluminum- Steel- Copper 10.5" wide(267mm) operating speed(65 F.P.M. 20 meters/minute Shipping Weight Approx. 1800 lbs(800kg.
Set of 4. Pipe Benders, Some Working, Some for Parts. $ 6000.00 + tax- as is condition These are as is items- no returns
Durma- JMT Profile Roll Model PBH 100 Shaft Diameters. 4.3" Roll Diameters. 12.4" Motor Power. 15 HP Turning Speed. 0- 26 FPM Dimensions. 69" L x 53" W x 65" H Weight. 7392 lbs. STANDARD SPECIFICATIONS: 1 set of standard Universal. Hardened and ground rolls(special steel) All 3 rolls Driven• 3-axis side supports with hydraulic forward-backward movement and mechanical up-down and r ight-left movement• Forward and back movement of lateral guide rolls are made hydraulically(Thrust) Side supports are suitable for angle iron Leg in-leg out bending• Portable control panel• Horizontal and Vertical operation• Body constructed of stress-relieved steel• Overload protection on hydraulic and electrical systems• Bottom rolls hydraulically adjust with 2 Programable digital readouts You are bidding on a Durma/JMT PBH-100 Profile ... moreAngle Roll Bender that was purchased brand new in 2010 from JMT. And is in very good condition. Used sparingly. And almost exclusively for rolling aluminum tubing. This is a quality built bender. No cheap parts on it. This roll bender is ready for lot's of serious bending. I'm upgrading to a CNC roll bender so this baby needs to go. Pictures show a sample of the roll bending we've done with this bender. And what it can do for you. Machine comes with 3 sets of tube dies 1" OD(delrin) 3" OD. 4" OD smooth steel and universal hardened dies. New cost for same bender is 43K. Without tube dies) These tube dies cost over 3.5K each set. Save thousands buying this roll bender. Bender capacity: will bend 4" x 4" x 1/2" mild steel angle. 4" sch 40 pipe, 3" x 3" x 1/4" wall square tube. Bender can be used in either vertical or horizontal position(currently in horz. position but will be turned vertical for shipping) Thank
Specifications Model 3400 Size L-W-H(inches) 168" x 23" 54" Current type 208/220/440V. 3 phase, 60 HZ Gauge cap. material Aluminum- Steel- Copper 13.75" wide(349mm) operating speed(65 F.P.M. 20 meters/minute Shipping Weight Approx. 2500 lbs(1134 kg.
Eaton Leonard 3" CNC Tube Bender Model VB300-115. S# VB300-HS-R-21-H-MT-0498, New head& hydraulics upgraded in'95, Right hand machine, Clockwise, Auto lube, Velog control, Max tube length to tangent 12' Low hour machine, 30hp 230/460v 3ph Wired 460v. Video- Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the ... moreitem until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
PINES CNC 040HYDRAULIC TUBE BENDER- PINES#040- PRESSURE DIE ASSIST- HYDRAULIC MANDREL EXTRACTOR- WIPER DIE HOLDER- R H(CLOCKWISE ROTATION) S/N 13800-97089- 480 volts- 15 hp motor NO TOOLING. CAN LOAD ON FLATBED TRUCK ONLY CUSTOMER RESPONSIBLE FOR TRUCKING CHARGES. FOB Burrton Kansas LET ME KNOW IF YOU HAVE ANY QUESTIONS. Ultimate Tube Bender Parts Plus. Inc. David Ulrich. 810-599-7862 cell.
Pines#3 Vertical Compression Bender. S/N 4524558151, New 1981. Stock# 30585 Capacity- 30 Ton. PRICE: $7.500.00 USD FOB TRUCK DAYTON OH. This unit is offered untested. Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
Machine Sold with a 30 Day MDNA Money Back Return Guarantee. Seller will load on Buyer's Truck at No Charge. Payment Due 10 Days after Auction Close. Machinery Dealers National Association Member FASTI 9ga x 127" CNC FOLDING MACHINE New 2000. Model 225-32-4, Stock# K13889 EQUIPPED WITH: Delem FM200 CNC Control. Programmable Flip Fingers, Gauging Arms, 120" Back Gauge. Deflect and Fold Adjustments, Foot Pedal. Tooling, Manuals. CATALOGUE SPECIFICATIONS: Bending Capacity. 9ga(157" Bending Length. 127" Maximum Gackgauge Depth. 120" Maximum Open Heigth. 13.7" Angle Setting Range. 0 to 180 Degrees. Bending Speed. 115 DegreesPer Second. Beam Adjustment. 3.15" Electrics. 440.220/3/60 Motor. 12 HP Approximate Machine Dimensions. 160" x 85" Approximate Machine Height. 76" Approximate Machine Weigh. ... more16.000 LBS. CONDITION: Machine Appears to be in Very Good Condition! VIDEO on Youtube: 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 Summary of Selling Policies Payment We accept business checks. Personal checks, money orders, PayPal, American Express, Visa and MasterCard credit cards, bank wire transfers, ACH, and, of course, cash for items picked up at our facility. Sales Tax Machinery. Tooling and Accessories used in manufacturing are usually exempt from sales tax in our state(Ohio) A sales tax exemption certificate will be required if you are a Ohio company. Equipment purchased for personal use is subject to sales tax if you are a Ohio resident. Shipping We ship anywhere in the world. Small items(under 150 Lbs) can be shipped UPS. Larger items. Sold in North America, are usually shipped via flat bed truck- load
Control Type: Bend Pro G1 Motor Horsepower: 40 HP, Weight: 19.000 lbs, In-Line Pressure Die Assist: Yes Hydraulic Mandrel Extractor: Yes Wiper Die Holder: Yes Direct Acting Clamp Die: Yes Direct Acting Pressure Die: Yes Bender Type- Horizontal: Yes Bending Capacity- Mild Steel Round: 3 Inches, Bending Capacity- Stainless Steel Round: 3 Inches, Swing Arm Arm Safety Plate: Yes CNC Dual Radius Stack: Yes Safety Mat: Yes Dual Overhead Tie Bars: Yes Bend Die Align: Yes Bend Rotation RH(Clockwise) Yes Oil Cooler: Yes Additional Information Bender was rebuilt for the customer and does not need. No hours on it after rebuild. Let me know if you have any questions or would like to see it under power. YOU TUBE VIDEO LINK: Located near Milwaukee WI. Bender can be loaded on flatbed truck at no exta cost.
Conrac Hydraulic Tube bender Model 474 RH(Clockwise Rotation) Hydraulic Mandrel Extractor Boost(Clampiing Style) New Sierra Corp. Digital Control(Includes 1 year warranty on Board) some mandrel rods FOB Illinois Machine loaded on flat bed truck only($500.00 rigging charge not included) Lot of tooling: TOOLING EXTRA COST: Bend Dies: 1/2" Pipe x 1.5" CLR- 1" Pipe(1.315) x 2.2" CLR- 1.5" Pipe(1.90) x 3.25" CLR- 2" Pipe(2.375) x 3.75" CLR- 3" Pipe(3.5) x 4.5" CLR- 4" Pipe x 6" CLR Pressure Dies: 2) 1/2" Pipe- 2) 3/4" Pipe- 1) 1" Pipe- 2) 1-1/2" Pipe- 1) 2" Pipe- 1) 3" Pipe- 1) 4" Pipe Mandrels: 2" IPS Schedule 40- 3" IPS Schedule 40 Chrome by Omni-x- 1.5" IPS Schedule 40 Chrome- 3" IPS Schedule 10 Chrome- 4" IPS Schedule 10 ... moreChrome- 4" IPS Schedule 40 Bronze MISC Wipers& Clamps CAN BE SEEN UNDER POWER BY APPOINTMENT