In 
 
Order by: 
Available to: 
Price: 
 - 
$
497.99
Buy It Now
$0 Shipping
Condition: Used
Location: Wooster,OH,USA
$
1,200
Buy It Now
$0 Shipping
Condition: Used
Location: Santa Cruz,CA,USA
$
69.99
Buy It Now
Free Shipping
Condition: Used
Location: Waterford,MI,USA
$
500
Buy It Now
$0 Shipping
Condition: Used
Location: Belvidere,IL,USA
$
595
Buy It Now
$125 Shipping
Condition: Used
Location: Heber City,UT,USA
$
1,699.99
Buy It Now
Free Shipping
Condition: Used
Location: Findlay,OH,USA
$
136.97
Buy It Now
$0 Shipping
Condition: New
Location: Perth Amboy,NJ,USA
$
1,499.99
Buy It Now
$0 Shipping
Condition: Used
Location: Elysburg,PA,USA
$
995
Buy It Now
$0 Shipping
Condition: Used
Location: Houston,TX,USA
$
2,000
Buy It Now
$0 Shipping
Condition: Used
Location: Houston,TX,USA
$
850
Buy It Now
$0 Shipping
Condition: Used
Location: Rancho Cucamonga,CA,USA
$
3,000
Buy It Now
$0 Shipping
Condition: Used
Location: Tucson,AZ,USA
Call Brett At 309-261-5695 for questions. BUYER PICKUP ONLY. 5 HP Price Self Contained Hydraulic Punch Press Power Unit with Table& Dies. Don't ... moreknow much about. Came out of plant liquidation. 5 HP Lincoln motor. 230/460 3 phase. Oil has been drained from reservoir. The pump is Vickers PVB5-RSY-20-CM11 Stored inside Buyer pickup or responsible for sending truck. I will strap to pallet and load truck. Call Freightquote for shipping quote. 800-323-5441. Reference item number. View all photos carefully. Check out my! Payment due within 7 days of auctions end. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f3b9acd92-0xf9-
$
979
Buy It Now
$0 Shipping
Condition: New
Location: Grand Forks,ND,USA
$
950
Buy It Now
Free Shipping
Condition: Used
Location: Edison,NJ,USA
$
2,125
Buy It Now
Free Shipping
Condition: Used
Location: Osseo,MN,USA
$
3,499.99
Buy It Now
Free Shipping
Condition: Used
Location: Millersburg,IN,USA
$
2,999.99
Buy It Now
$0 Shipping
Condition: Used
Location: Cedar Lake,IN,USA
$
12,900
Buy It Now
Free Shipping
Condition: Used
Location: O'Fallon,MO,USA
$
1,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Middlebury,IN,USA
$
999
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale,NJ,USA
$
3,000
Buy It Now
Free Shipping
Condition: Used
Location: Fort Wayne,IN,USA
$
1,450
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
Up for sale here is an Alva F Allen Model B2 2-Ton OBI Bench Top Punch Press& Tooling Needs Assembled. I bought this for a small stamping project ... morethat I never got around to and I'm ready to part ways with it. When I purchased it it was working. But they had a counterweight basically tied to the back of the motor and several other poor fixes installed. A few of the guards and the foot pedal have been cleaned and painted, they've been sitting here for better than a year though. It includes a variety of punch press tooling. You'll need to reassemble and fine tune I'm sure. Feel free to ask any questions. SCT3324
$
1,799
Buy It Now
Free Shipping
Condition: Used
Location: Coloma,WI,USA
$
2,750
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
2,200
Buy It Now
Free Shipping
Condition: Used
Location: San Bernardino,CA,USA
$
2,000
Buy It Now
$0 Shipping
Condition: Used
Location: Westminster,MD,USA
$
895
Buy It Now
Free Shipping
Condition: Used
Location: Andover,MA,USA
$
3,259.5
Buy It Now
$0 Shipping
Condition: New
Location: Rosemead,CA,USA
$
157.99
Buy It Now
$0 Shipping
Condition: Used
Location: Wooster,OH,USA
$
491.24
Buy It Now
$81.87 Shipping
Condition: Used
Location: United Kingdom
$
450
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown,VA,USA
$
1,300
Buy It Now
$175 Shipping
Condition: New – Open box
Location: Miami,FL,USA
$
2,799.99
Buy It Now
Free Shipping
Condition: Used
Location: Middlebury,IN,USA
$
42,999
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
$
625.1
Buy It Now
$95 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
1,700
Buy It Now
$0 Shipping
Condition: Used
Location: Glenn,MI,USA
$
999.99
Buy It Now
$0 Shipping
Condition: Used
Location: Columbia,TN,USA
$
1,950
Buy It Now
Free Shipping
Condition: Used
Location: Bristol,CT,USA
aims NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 ... morePM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Di Acro- Houdaille of Lake City. Minnesota. This is a 18-Station Turret Punch Press in GREAT condition. Model# 18-E Stylus Serial# 0660875150 Specifications: Number of Stations: 18. Maximum Material Capacity: 1/8" Punching Capacity: 2" in 16-gauge mild steel. Throat Depth: 19" Punching Speed: Up to 140 holes per minute. Crankshaft Speed: 245 strokes per minute. Overall Table Size: 60" x 36" Carriage Travel: 19" x 24" Work Piece Size: 19" x 24" Punch Motor: 1/2 Horsepower. 115/230 Volt, 1,725 rpm, 9/4.5 Amp, 60 Hz, Single Phase. Turret Motor: 1/4 Horsepower. 115 Volt, 1,725 rpm, 4.4 Amp, 60 Hz, Single Phase. Overall Dimensions: 62" x 66" x 68" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH P
$
2,023.99
Buy It Now
$0 Shipping
Condition: Used
Location: Baroda,MI,USA
$
1,750
Buy It Now
Free Shipping
Condition: Used
Location: Gardena,CA,USA
$
689.5
Buy It Now
$0 Shipping
Condition: New
Location: Rosemead,CA,USA
$
341.05
Buy It Now
$119 Shipping
Condition: New
Location: Hayward,CA,USA
$
1,295
Buy It Now
$180 Shipping
Condition: Used
Location: Springfield,MO,USA
$
3,259.77
Buy It Now
$0 Shipping
Condition: New
Location: Monrovia,CA,USA
$
450
Buy It Now
Free Shipping
Condition: Used
Location: Sidney,OH,USA
$
995
Buy It Now
$0 Shipping
Condition: Used
Location: Houston,TX,USA
$
500
Buy It Now
$0 Shipping
Condition: Used
Location: Osseo,MN,USA
$
1,950
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
180
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Winnetka,CA,USA
$
759.99
Buy It Now
Free Shipping
Condition: Used
Location: Lockport,NY,USA
$
750
Buy It Now
$0 Shipping
Condition: Used
Location: Chicago,IL,USA
$
1,750
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
10,500
Buy It Now
Free Shipping
Condition: Used
Location: Pomona,CA,USA
$
1,299.99
Buy It Now
Free Shipping
Condition: Used
Location: Millersburg,IN,USA
$
999.98
Buy It Now
Free Shipping
Condition: Used
Location: Millersburg,IN,USA
$
14,950
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale,NJ,USA
$
17,500
Buy It Now
Free Shipping
Condition: Used
Location: Pomona,CA,USA
$
879.99
Buy It Now
Free Shipping
Condition: Used
Location: Tacoma,WA,USA
$
1,200
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale,NJ,USA
$
1,297.99
Buy It Now
$0 Shipping
Condition: Used
Location: Wooster,OH,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
GRAHAM BOND- HOLY MAGICK VERTIGO SWIRL VERTIGO 6360 021 First UK Press Large Swirl First HEAVY vinyl. A whopping 139 gr. in weight! early stamped machined matrices UK PRESS 1970 This is extremely scarce and the first time I have ever had this album. It is definitely a very strange otherworldly album that did not have many takers. Very obscure then and on the all-time collectable Vertigo label. I thoroughly enjoyed listening to it. Bond was born in. Adopted from a Dr. Barnardo's home. He was educated at the in. East London, where he learned music. His first jazz gig was in 1960 with the Goudie Charles Quintet, staying for a year. He first gained national attention as a as a member of the Don Rendell Quintet. Then briefly joined's before forming the Graham Bond Quartet with musicians he met in the Korner group. On and on. Together with ... moreon; and adopting the Hammond organ as his main instrument. The group then became the Graham Bond Organization(GBO) While John McLaughlin was later replaced by on saxophones. Lack of commercial success. Plus internal struggles, brought an end to the group in 1967 as Bond's mental and physical health deteriorated. Jack Bruce and Ginger Baker had already left, to form Cream with. Baker's replacement. And Dick Heckstall-Smith went on to form. After the break-up of the Organization. Bond continued to exhibit mental disorders, with manic episodes and periods of intense. Exacerbated by heavy drug use. Moving to America, he recorded two albums and performed session work for and among others. But he returned to England in 1969. He then formed Graham Bond Initiation with his new wife Diane Stewart, who shared his interest in. And in 1970 Holy Magick, which recorded a self-titled album and We Put Our Magick On You. He was also re-united with old band members while playing saxophone in and spending a short time in the Jack Bruce Band. Solid Bond. A double-album compiling live tracks recorded in 1963 by the Graham Bond Quartet(Bond, McLaughlin, Bruce and Baker) and a studio sess
Cincinnati Milacron Arrow 500 CNC Vertical Machining Center New 1997 EQUIPPED WITH: Acramatic 2100 CNC Control w/ Color CRT(P.C. Based) Hand Held Pendent. Max Program Storage, Tool Cycle Timer and Counter, Fanuc 0 Translation, MC Extended Cycles. 3-1/2" Floppy, Rigid Tapping, 21 Station Automatic Tool Changer, Full Coolant Enclosure, Keyboard, Spindle Load Meter, Chip and Coolant System. CATALOGUE SPECIFICATIONS: X Travel(Longitudinal) 20" Y Travel(Cross) 20" Z Travel(Vertical) 20" Table Working Surface. 27.5"x20.5" Table Work Load Capacity. 770 LBS Spindle Horsepower. 10 HP Spindle Speeds. 30-6000 RPM Spindle Taper. 40 CAT Feed Rates. X& Y. 0.1 to 472 IPM Feed Rate. Z. 0.1 to 393 IPM Rapid Traverse X& Y. 787 IPM Rapid Traverse Z. 787 IPM Tool Storage Capacity. 21 Approximate Dimensions. 79" x 87" ... moreApproximate Height. 106" Approximate Weight. 8.820 LBS
NICE" BRIDGEPORT Milling Machine This Machine Is"READY" TO WORK FOR YOU! Serial# 221009 1.5 HP R8 Spindle 9 x 42 Table Chrome Ways Specifications Main Motor: Motor: 1.5 Horsepower Vari Speed The Head VERY QUIET and Smooth through the Speed Ranges(Head Rebuilt 1- 2013 and New Spindle Bearings) Electrical: 220/ 230/ 440/ 460 Volt. Three Phase(currently wired for 208/ 220 Volt) New Quick Position Operators Handle Draw Bar Bijur 1 Shot Way Oiler New Spindle Bearings 1- 2013 with Head Rebuild This mill has a NEW X Axis Screw/ Nut on the Table.006 Backlash This mill has a NEW Y Axis Screw/ Nut on the Saddle.006 Backlash The Variable Speed Head is VERY VERY Smooth& Quiet Chrome Ways This Machine is located in- Wichita KS AirCap Aerospace Hdq USA Can Be Seen Under Power This machine is READY TO WORK! Questions? Inspection? Call ... moreRoger@ 316- 214- 8100 cell to schedule cstz NO international Bidders FREE LOADING Item Pick Up Recommended For a shipping Rates call Freight Quote@ 800-323-5441 x 1736 Scott Pelan Reasonable Rates- Helpful Service Machine Details Table: Overall Size: 9 x 42" T-slots: 3@ 2.5" centers T-slot Size: 0.625" Table Load: 750 lbs. Height Above Floor: 47-1/4" Travels: Table Travel(X-Axis) 30" Saddle Travel(Y-Axis) 12" Knee Travel(Z-Axis) 16" Quill Travel: 5" Ram Travel: 12" Spindle: Throat Distance: 6.75"min. 18.75" max. Table to Spindle Nose: 2.5" min. 18.25" max. Spindle Diameter: 1.875" Quill Diameter: 3.375" Quill Feed: 0.0015/ 0.003/ 0.006 in.rev Taper: R8 Speed Range: Low(infinitely variable) 60- 500 rpm High(infinitely variable) 500- 3.000 rpm Head Adjustments: Head Cant(forward/back) 45 degrees Head Tilt(side to side) 90 degrees Head Swivel(side to side) 360 degrees Capacities: Drilling Capacity(Manual) 3/4" Drilling Capacity(Power) 3/8" Milling Capacity(mild steel) 2 cu. in.min. Boring Range(mild steel) 6" diameter Powered by The free listing tool. List your items fast and easy and manage y
Here’s a nice. Little, lightly used, 3 Ton Perkins Junior Punch Press that was only used to crimp brass wire terminals- Not Punch Holes in Steel Plate… It includes an Etco“power cord prong crimping die” with strip feed that is fully functional. Electric solenoid actuated(GE. 115V) single stroke, dog clutch Includes belt& flywheel guarding with door safety switch. AB Motor Starter w/Therm. Prot. missing cover) FPE S/P Fuse Disconnect and 115V Work Light. Perkins Junior OBI Punch Press· Capacity: 3 Ton· Model: JR. Serial: 44057· Stroke: 1.125” Shank: 1” Ram Adj: 1” Shut Hgt. Over Bed: 4” Bed Area: 5½”x 9” Motor: GE. 1/3 HP, 1725 RPM, 115V, 6.4A, 1 Phase· Etco Crimp Die Tooling; Warwick. R.I. Model: B817/ 8935· Etco Press No: 44057· Net Weight: 203 lbs. as pictured) Fully Tested– Quiet. Tight& Fast– ... moreFully Guaranteed. May be inspected under power at our facility. If you don’t have the $ to PAY FOR this machine within 3 days of purchase- please Don’t press the“COMMIT TO BUY” button. Free Credit and Free Lay-a-way are not offered or included. Free Loading For Buyer Pick Up! OR $29 to palletize press on approx. 36”x 36” pallet at approx. 250 lbs. for shipping by buyer’s common carrier from zip 44440 We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3734 for competitive motor freight rates. Give them our listed pallet size& weight(from our ad) your zip& our(44440) zip code and they can advise their best deal. Many Thanks, Tom/ Lloyd If you have any questions or want more pictures or information please call us at(330) 652-7535
QUOTE#24550. 7) 32 TON HEIM OPEN BACK GAP FRAME PRESSES New 1977. Serial No 2232, Model 3-G-F, EQUIPPED WITH: Air Clutch& Brake Flywheel Drive 1.5" Thick Bolster Plate CATALOGUE SPECIFICATIONS: Tonnage Capacity. 32 TON. Stroke Length. 2" Shut Height to Bed. SDAU) 10.75" Ram Adjustment. 2.5" Ram Area. L-R x F-B. 12" x 9" Bed Area. L-R x F-B. 24" x 15" Opening In Bed. L-R x F-B. 14" x 7" Hole In Ram. 2" Throat Depth. 8.5" Width Of Opening In Back. 16" Strokes Per Minute. 140 SPM. Motor. Horsepower. 3 HP. Electrical System. 220-440/3/60. Floor Space Required. W x D. 4' x 4'2" Overall Height. 7'9" Weight Approximately. 3000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $3.950.00(EACH) ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
USED 75 TON MINSTER O.B.I. MECHANICAL PRESS MODEL 7 WITH AIR CLUTCH AND 13 TON DIE CUSHION YEAR: 1953 Specifications: Type: Single geared Tonnage: 75 tons Strokes per minute: 40 Stroke of slide: 7” Max adjustment of slide: 3-1/4” Shut height: Over Bolster: 13” Over Bed: 16” Capacity of die cushion: 13 tons. 100 PSI Cushion stroke: 4-1/2” Clutch: Location: Driveshaft Type: 12-AFC No. discs: 2 Lubrication system: Farval Dualine We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact us. 800 899 8182 ext. 208 Check out my! PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call ... moreand verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately the machine or machines to conform to all Federal, State and Local Government Safety Standards, and all Industry Safety Standards. MDNA return privilege applies to all machines(unless sold as-is) We will accept(within 30 days of shipment) any machines and equipment. Freight prepaid, for refund of t
ELMEG TYPE III 3500 ELECTRIC PUNCH PRESS Click Images to Enlarge ​ ELMEG ELECTRIC PUNCH PRESS PREVIOUSLY USED TO PUNCH THE CENTERS ON ALBUMS TYPE III 3500 VOLTS: 220 SERIAL NO: 13140 JAHR: 66 TABLE: 14.5" x 13" THROAT: 10-1/4" HEAD HEIGHT ADJUSTMENT: 3-3/4" TABLE HEIGHT: 34" APPROXIMATE RAM DIAMETER: 3-1/4" OVERALL MEASUREMENTS: 29" x 18" x 61" TALL WEIGHT: 881 LBS LOADING FEE: $20 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship ... moreto: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verification of payment status which could be credit card or any other
Bruderer BSTA 30 3 Post High Speed Press Completely Reconditioned Machine Our expert staff has been repairing and reconditioning Bruderer Presses for over 30 years. We can completely recondition one of our presses or for discounted price one of yours. Lead time for a completely reconditioned Bruderer BSTA 30 3 post press 4-5 weeks The pictures are of a recent completely reconditioned machine performed by our fully trained technicians. All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes Metric Services with a tax exemption certificate, any sales, use, excise, ... moreor other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of Metric Services, be added to the quoted purchase price and invoiced by Metric Services to Purchaser. The failure of Metric Services to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by Metric Services and Purchaser in writing. Smaller machinery or equipment will be sold with FOB terms with the Purchaser only being responsible for freight charges. A qualified rigger with liability insurance must perform all removal of machinery or equipment when terms are not FOB. No Purchaser will be allowed to load their own machinery or equipment unless proof of insurance is submitted prior and all other factory requirements are met. Loading dock hours are 9:00a.m.2:00p.m. Monday-Friday. Unless specifically stated in writing by Metric Services, all freight carriers must use flat bed truck only. Some skidding and crating of machinery or equipment can be performed by Metric Services for an additional fee. Upon reasonable notice to M
QUOTE# 26569. 4) 25 TON ROUSSELLE/HEIM O.B.I. PRESSES Refurbished 2007. Serial No P30153RF, Model 3, EQUIPPED WITH: Air Clutch& Brake Eccentric Shaft Drive Non-Geared Flywheel Design 1.5" Bolster Plate Bijur Lube System SSC-1500 Rockford Revolution Control w/Dual Palm Buttons CATALOGUE SPECIFICATIONS: Tonnage Capacity. 25 TON. Stroke Length. 2" Shut Height. SDAU) 10.75" Ram Adjustment. 2" Bed Area. L-R x F-B. 20" x 14" Bed Opening. L-R x F-B. 12" x 7" Width Of Opening In Back. 13.5" Throat Depth. 7.5" Crankshaft Diameter. 2.5" Strokes Per Minute. 135 SPM. Floor Space Required. W x D. 2'11" x 3'7" Machine Height. 7' NOTE: This Machine Was Refurbished By The Factory In 2007 With A Replacement Price Of $31.043.00 PRICE: F.O.B. OUR WAREHOUSE. $9.950.00(EACH) ALL ... moreMACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- Midland Ross® 3803 Press Punch comes with what you see in the pictures. If you don't see it. You probably won’t get it. Specifications are from manufacturer and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. Model Number: 3803 Serial Number: 364 Condition: Used Disclaimer: All items are ... moresold as is and untested in fair to excellent condition. Returns are not and will not be allowed for these items. For More Pictures Please Click the Following: The charge for freight will be determined by the destination upon the ending of the auction. There will be a packing fee on larger and heavier items it will be determined by the size and the care that has to go into packing an item. Most of the time. People are impressed with the job we do because we customize our own skids for larger items and we take the utmost care to provide a safe and cozy journey for your item. We strive to make our customers happy and want you to feel that we have treated you with the ultimate respect. If you have any questions please call Bennie at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. 04/30/2012 BL Powered by The free listing tool. List your items fast and easy and manage your active items.
The Waterbury Farrel Foundry and Machine Co. Power Press. There is a Joseph Hyman and Sons decal on this press. Press has a Dayton 1/2 HP. 3 Phase, 220 Volt Electric Motor. Model No. M1E1174JP with 1425/ 1725 RPM and bus station with I-T-E XJ-L Non Switch Fusible Plug Cat. no. XP 421, Max. Amps: 30 Great for stamping various metals with your companies custom logos. Numbers and other marks. Used condition. Item comes as is. Are willing to ship to location costs will be added to final price. Shipping fees will be calculated and quotes will be provided to serious buyer. On May-17-12 at 11:16:21 PDT. Seller added the following information: Shipping Price Estimator, Delivery Zip: Weight: lbs. powered by,
Item#0553-230 Micro Power Press used to make Jewelry. Electronic, Watch Parts, Small Precision Part-Making Stamping A great Display. Trade Show Machine! Technical Details: 115V/1PH/50-60HZ Bodine electric D-C motor speed control and gear box motor Bench size: 36" W x 24" D x 30" H Size: 11-1/2" H x 8" W x 9" D EQUIPPED WITH: Bench with one door. Two shelves and a butcher block top
Nice looking machine. All original. 14 gauge mild steel. Will ship. I'm 10 miles west of Milwaukee if you would like to inspect or pickup. As is Jeff 262 227 7774
Floor type. Dual Head, motor driven, hydraulically operated machines of"C" frame construction which have been designed to be used with a single or multiple cutting die to cut cloth, paper, wood, plastic or similar materials.
USED AMADA OCTO 334 TURRET PRESSMACHINE. 9 STATION( THICK- W/ ONE AUTO INDEX) 29.528" X 39.37" MAXIMUM TRAVERSE, 29.528" X 78.740" MAXIMUM SHEET WITH REPOSITIONING, 60" X 120" MAXIMUM SHEET WITH APPROPRIATE SUPPORT TABLES, REAR ADDRESS CLAMPS, 250 MAXIMUM SHEET THICKNESS, 150 HITS PER MINUTE( ON 1" CENTERS) 1,575 I.P.M. FEED SPEED, ONE AUTO INDEX STATION, FANUC SYSTEM 6M CNC CONTROL, AUTO SHEET REPOSITIONING, 2 MILLER SAFETY MATS INSTALLED BY AMADA WITH OPERATOR RE-SET, THICK STYLE TURRET. YOU MUST ARRANGE FOR MOVING AND SHIPPING SERVICES. CALL 636-532-7000 AND ASK FOR HOWARD WITH ANY QUESTIONS.
Strippit Turret punch press FC-1000.Punching capacity 30 Tons. Includes Tool holders. Call Dave 321-289-7713 if you have any questions or email.
Rousselle SS-30-80 Double Gear Straight Side 80 Ton Punch/Perf Press 10S80 NICE USED PRESS WITH ALLEN-BRADLEY CONTROLS. LUBE SYSTEM, AND LIGHT CURTAIN SAFETY SYSTEM. EVEN INCLUDES A MANUAL. THE RAM MEASURES 20.5" X 80" AND THE BED IS 30" X 80" WITH T-SLOTS ON 10" CENTERS. THE TAG WITH THE RAM INFORMATION IS MISSING BUT AS WE HAVE A SIMILAR PRESS THE INFO SHOULD BE SIMILAR AND IS LISTED BELOW. IF YOU NEED EXACT SPECIFICATIONS, PLEASE CONTACT ROUSSELLE. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 10S80 SERIAL# 11697 OTHER: 460 VOLT. 3-PHASE STROKE: 6(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) SHUT HEIGHT: 7.25(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) ADJUSTMENT: 4(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) STROKES/MINUTE: ... more50(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) OVERALL DIMENSIONS: WIDTH: 5' LENGTH: 112" HEIGHT: 143" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $5.00 HANDLING CHARGE FOR ALL DOMESTIC UPS AND USPS PACKAGES. $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES, AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBL
Quote#26566. 5) 35 TON BLISS DOUBLE-CRANK GAP FRAME PRESSES New 1980. Serial No H69068, Model C2-35, Order Number HP53451 EQUIPPED WITH: Air Clutch& Brake Air Counterbalance Stock Feeder(Front to Back) 2" Bolster Plate Trabon Automatic Lube System Control Stand(Moveable) CATALOGUE SPECIFICATIONS: Tonnage Capacity. 35 TON Stroke Length. 2" Shut Height to Bed. SDAU) 11.25" Ram Adjustment(Power) 2.25" Ram Area. L-R x F-B. 42" x 15" Bed Area. L-R x F-B. 54" x 18" Bolster Area. L-R x F-B. 54" x 18" Bolster Thickness. 2" Distance Between Housings. 46" Bed to Gibbs. 15" Strokes Per Minute. 200 SPM Motor. Horsepower. 3 HP/1200 RPM Overall Dimensions. W x D. 6'7" x 4' Overall Height. 8'4" Weight Approximately. 6000 LBS NOTE: We Have 5 Of These Presses Available ... moreIn Our Warehouse. PRICE: F.O.B. OUR WAREHOUSE. $12.500.00(EACH) All machines/equipment subject to prior sale.
HIDAKA Punch Press Model: Mark-45• Serial Number: 113• Mfg: 7/85 SPECIFICATIONS: Capacity. 45 Tons• Stroke. 4¾" Strokes per Minute Variable. 50-120• Adjustment of Ram. 2 1/ 3" Shut Height. 10¾" Bed Area: Left to Right. 32" Front to Backe. 15¾" Motor. 5 HP
QUOTE# 24896. 30 TON MINSTER"HUMMINGBIRD" HIGH-SPEED FLYWHEEL DESIGN STRAIGHT SIDE DOUBLE CRANK PRESS New 1977. Serial No HB2-30-23211, Model HB2-30-24 EQUIPPED WITH: Air Clutch& Brake w/Selector Controls Minster 4" Cam Feed Variable Speed Drive 3" Thick Bolster Plate Tie Rod Construction Automatic Recirculating Lubrication System 15 HP Eddy Current Main Drive Motor CATALOGUE SPECIFICATIONS: Tonnage Capacity. 30 TON. Stroke Length. 1.26" Shut Height Over Bed. SDAU) 13.125" Slide Adjustment(Power) 1" Slide Area. L-R x F-B. 24" x 12" Bed Area. L-R x F-B. 24" x 16" Window Opening. Width. 12.75" Bed Opening. L-R x F-B. 18" x 5" Strokes Per Minute. Variable. 200 to 1000 SPM. Main Drive Motor Horsepower. 15 HP. Overall Dimensions. W x D. 5'10" x 4' Overall Height. ... more9'2" Weight. Approximately. 13000 LBS. PRICE: F.O.B. ELK GROVE. IL. $9,500.00 AS IS. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Quote# 24552. 45 TON STAMTEC OPEN BACK GAP FRAME PRESS New 1991. Serial No 0225, Model G1-45S, EQUIPPED WITH: Air Clutch& Brake Air Counterbalance Variable Speed Drive 3.5" Thick Bolster Plate Crank Angle Indicator Electrical Control w/Programmable Controller CATALOGUE SPECIFICATIONS: Tonnage Capacity. 45 TON. Stroke Length. 3.15" Die Height to Bolster. SDAU) 9.45" Shut Height to Bed. SDAU) 12.45" Ram Adjustment(Power) 2.36" Ram Area. L-R x F-B. 16" x 12" Bed Area. L-R x F-B. 33.5" x 17.5" Opening In Bed. L-R x F-B. 19.7" x 13.2" Strokes Per Minute. Variable. 40 to 100 SPM. Motor. Horsepower. 5 HP VS. Electrical System. 230-460/3/60. Floor Space Required. W x D. 4' x 3'2" Weight Approximately. 7500 LBS. PRICE: F.O.B. OUR WAREHOUSE. $16.500.00. All Machine/Equipment subject ... moreto prior sell. A1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e08c53ab7-0xfd-
AUTOMATIC 8 HEAD FLUID LIQUID CUP FILLER + SEALER SYSTEM Click Images to Enlarge ​8 HEAD FLUID FILLER PREVIOUSLY USED TO FILL CUPS SHOWN IN PHOTOS WITH GELATIN. HOWEVER THIS MACHINE CAN BE USED FOR OTHER FLUID APPLICATIONS. FEATURES TRI CLOVER PUMP SYSTEM TRI CLOVER MODEL: 76TTR-30M-205-11/2-316L KITZ MODEL: C-1 KITZ PSI: 60- 100 WORK TEMP: 20 ~ 60 DEGREES C OVERALL MEASUREMENTS: 150" x 77" x 90" TALL APPROXIMATE WEIGHT: 2.200 LBS COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic ... moreI will ship to: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) e-mail: ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verification of payment status which could
QUOTE#25969. 22 TON PRECISION GAP O.B.I. PRESS New 1996. Serial No 22-PN0075, Model 22N-GOBI EQUIPPED WITH: Air Clutch& Brake Palm Buttons Inch. Single& Continuous Modes CATALOGUE SPECIFICATIONS: Tonnage Capacity. 22 TON. Stroke Length. 3" Shut Height. SDAU) 8.25" Ram Adjustment. 2" Bed Area. 20" x 12" Ram Area. 11" x 10" Throat Depth. 7" Strokes Per Minute. 150 SPM. Note: Machine Appears To Be In Very Good Condition. PRICE: F.O.B. OHIO(MONCLOVA) $9.950.00. Machinery/Equipment Subject to Prior Sale.
Now available for inspection and purchase at our JV Partners warehouse in Cincinnati. Ohio is this excellent operating Bliss C45 Flywheel Type OBI Punch Press, S/N 65010, Manufactured New in 1975. SPECIFICATIONS: CAPACITY 45 TONS BED AREA 29 1/2" X 18" RAM AREA 15 1/2" X 10 1/2" 12.25" SHUT HEIGHT 3" ADJUSTMENT 4" STROKE 45 SPM to 110 SPM VARIABLE AIR CLUTCH AND BRAKE AIR COUNTERBALANCES(2) VARIABLE SPEED MOTOR AND CONTROLS MANUAL ADJUSTMENT SCREW FOR SETTING INCLINE You can see this very nice machine tool under power at our JV Partners warehouse in Cincinnati. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Bliss Model C45 OBI w/ Variable Speed Motor. Built with quality in the USA. Overall. A"Great Operating. Good Looking" Punch Press that is ready to go to work. ... moreThe appearance speaks for itself(see photo's) If you need a good 45 Ton Flywheel Type OBI Punch Press. Don't pass up this opportunity. Y ou will have no regrets if you buy this machine. We believe the new owner of this Bliss C45 OBI will be very happy with it. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be. Send it back to us and we’ll refund what you paid us. Every item we sell. Unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse(515 Kercher St. Miamisburg, OH 45342) We request that the successful buyer contact us within 72 hours f
GOEBEL HYDRAULIC PRESS MODEL- C15 SN- 246/1200 15 TON C FRAME#51116 Payment All payments must be received by Industrial Asset Recycling within 7 days. Shipping Buyer responsible for shipping. And costs related to shipping. FOR AN EXTRA FEE- PALLETIZE AND SHRINK WRAPPING CAN BE ADDED* About Us At Industrial Asset Recycling LLC we still believe in a personal relationship with our clients and attuning all our resources to their best advantage and needs. Regardless of your business we have an expert to fit your specialized need. Collectively. We have experience in all business areas of Asset Management, Recycling and Environmental Remediation to service your ever changing business needs. SEE OUR STORE FOR MORE GREAT DEALS Item sold"As Is"
QUOTE#26622. 400 TON HEIM"MAXI-STAMPER" STRAIGHT SIDE TWO-POINT ECCENTRIC DRIVE PRESS New 1995. Serial No H-3849, Model S2-400MS, EQUIPPED WITH: HI-PRO Combination Air Clutch& Brake(Low Inertia) Steel Fabricated& Tie-Rod Construction Variable-Speed Drive Flywheel Brake Hydraulic Overload Slide Adjustment Indicator 8" T-Slotted Bolster Plate T-Slotted Slide Moveable Operators Console w/PLC CATALOGUE SPECIFICATIONS: Tonnage Capacity. 400 TON. Stroke Length. 8" Shut Height. 26" Ram Adjustment. Power) 12" Bolster Area. L-R x F-B. 100" x 48" Bolster Thickness. 8" Window Dimension. L-R. 28" Strokes Per Minute. 20 to 45 SPM. Motor Horsepower. 60 HP. Weight Approximately. 95000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $139.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Rousselle S2-30-100 Double Gear Straight Side 100 Ton Punch/Perf Press 10S100 NICE USED PRESS WITH ALLEN-BRADLEY CONTROLS. LUBE SYSTEM, AND LIGHT CURTAIN SAFETY SYSTEM. EVEN INCLUDES A MANUAL. THE RAM MEASURES 20.5" X 99" AND THE BED IS 30" X 99" WITH T-SLOTS ON 10" CENTERS. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 10S100 SERIAL# 23479 OTHER: 460 VOLT. 3-PHASE OVERALL DIMENSIONS: WIDTH: 5' LENGTH: 11' HEIGHT: 140" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& ... moreHANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $5.00 HANDLING CHARGE FOR ALL DOMESTIC UPS AND USPS PACKAGES. $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES, AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN E
FEDERAL S-55 8IN STROKE 60 TON PUNCH PRESS 1973 YEAR CALL FOR DETAILS SEAN 818-355-2974
60 ton Danly Open Back Inclinable Plain Flywheel Punch Press Specifications Rated capacity: 60 Tons, Stroke of slide: 3.5" Shut height. SDAU, over bed: 13.5" Adjustment of ram: 3" Area of bed: 32" L to R) X 21" F ro B) Depth of throat: 11" Width of opening through back: 17" Strokes per minute: 100, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
QUOTE# 24452. 60 TON BLISS(EW) O.B.I. PRESS New 1971. Serial No H63050, Model C60 EQUIPPED WITH: Air Clutch& Brake Electromat Air System Link 501 Controls Palm Buttons 3" Bolster Plate CATALOGUE SPECIFICATIONS: Tonnage Capacity. 60 TON. Stroke Length. 4" Shut Height. SDAU) 14.25" Ram Adjustment. 3" Slide Area. L-R x F-B. 20" x 15.25" Bed Area. L-R x F-B. 32" x 21.5" Throat Depth. 18" Strokes per Minute. 90 SPM. Overall Dimensions. W x D. 6' x 8' Weight. Approximately. 10000 LBS. NOTE: Machine Appears To Be In Good Condition. PRICE: F.O.B. OHIO(MONCLOVA) $19.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
QUOTE# 24856. 60 TON MINSTER"PULSAR 60" ULTRA-HIGH-SPEED STRAIGHT-SIDE PRESS New 1984. Serial No TR2-60-25494, Model TR2-60 EQUIPPED WITH: Air Clutch& Brake 4000 LB Littell Double End Automatic Centering Reel(Model 40-12. Serial No 85593-83) Minster Slant Bed Feeder/Straightener(Serial No 13-11088) Minster Die Check Control Sankyo"Variax" Adjustable Cam Feed Helm Loadguard(Model TLG2300) 3.62" Thick Bolster Sound Enclosure Pedestal Control Stand CATALOGUE SPECIFICATIONS: Tonnage Capacity. 60 TON. Stroke Length. 1" Shut Height to Bolster. Maximum, SDAU 11.5" Shut Height to Bolster. Minimum, SDAU 9.75" Bolster Adjustment. 1.75" Ram Area. L-R x F-B. 36" x 16" Bolster Area. L-R x F-B. 36" x 30" Opening In Bolster. L-R x F-B. 30" x 4" Strokes Per Minute. Variable. 100 ... moreto 1200 SPM. Motor. Horsepower. 30 HP. Weight. Approximately. 25000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $29.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
QUOTE# 25971. 60 TON BLISS O.B.I. PRESS New 1975. Serial No HP50717, Model C60 EQUIPPED WITH: Air Clutch& Brake Air Counterbalances Press Feed and Drive Link 1000 Tonnage Monitor Masa Die Monitor System Magnetek Frequency Drive Palm Buttons CATALOGUE SPECIFICATIONS: Tonnage Capacity. 60 TON. Stroke Length. 4" Shut Height. SDAU) 14.25" Ram Adjustment. 3" Ram Area. L-R x F-B. 17" x 11" Bed Area. L-R x F-B. 32" x 21.5" Throat Depth. 18" Strokes per Minute. Variable. 0 to 90 SPM. Overall Dimensions. W x D. 6' x 8' Weight. Approximately. 10000 LBS. NOTE: Machine Appears To Be In Very Good Condition. PRICE: F.O.B. OHIO(MONCLOVA) $14.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Quote# 25915. 500 TON LIEN CHIEH STRAIGHT-SIDE DOWN-ACTING GIB GUIDED HYDRAULIC PRESS New 1999. Installed Nov 2000, Serial No KHM04582, Model LHS500-2800x2200 EQUIPPED WITH: Allen Bradley Panel View 900 Programmable Control Rolling Bolster w/98" Travel And 25 Ton Maximum Die Weight T-Slotted Ram Face And Bolster Dual 14" Diameter Cylinder Rods Rexroth Pumps And Valves Windows- Factory Operation Manual CATALOGUE SPECIFICATIONS: Tonnage Capacity. 500 TON. Stripping Capacity. 100 TON. Return Capacity. 24 TON. Stroke Length. 60" Daylight. Maximum. 70" Bed Area. L-R x F-B. 110" x 86" Slide Area. L-R x F-B. 110" x 86" Rapid Advance Speed. 720 IPM. Pressing Speed. 60 IPM. Return Speed. 720 IPM. Main Motor Horsepower. 100 HP. Electrical System. 460/3/60. Floor Space Required. L x W. 11'8" x 11'8" ... moreOverall Height Above Floor. 20'10" Weight Approximately. 140.000 LBS. NOTE: This Machine Appears To Be In Very Good Condition As Taken From Service PRICE: F.O.B. OUR WAREHOUSE. $99.500.00. All Machine/equipment subject to prior sell.
Make offer Manufacturer: Minster Model: 40-5-3853 Straight Side Single Crank Double End Drive Dual palm control When we got this machine we had the motor rewound and new bearings installed. We have never used this machine for production. Specifications: Tonnage 88 Size Of Bed& Ram 29" X 31" Distance Between Sides 29" Ram Stroke 14" Ram Adjustment 3-1/2" Shut Height 12" Table Depth 31" Weight 17.000lbs? I was told by rigging company. Please call or email me with any questions you may have. PayPal is NOT accepted. The preferred method is by check or ETF. Shipping is FOB Murfreesboro, TN 37129. I do not have equipment to move this press. I can unhook all utilities so the movers can just move it. Consolidated Mill Supplies(CMS) has been a leader in the particle size reduction and selection industry since ... more1946. Starting as a regional supplier to feed mills. Our business has grown into supplying customers in various industries in all 50 states and over ten foreign countries. CMS strives to unite our many suppliers with our customers needs in the most efficient, cost effective solution. Since 1995 we have grown by over 15% a year by offering new products and expanded services to an ever-growing customer base. Our customers include large animal feed producers, aqua feed producers, poultry feed and pet food manufacturers, ethanol and bio-diesel producers, coal and mineral mining, wood and fiberglass processors and an extensive array of rendering and recycling processors. Clint Russell Consolidated Mill Supplies LLC 841 Commercial Ct. Murfreesboro, TN 37129(615)8nine3-77one7 office(616)9zero1-9one70 cell
QUOTE# 25956. 300 TON KOMATSU STRAIGHT SIDE DOUBLE CRANK PRESS New 1986. Serial No 10047, Model E2M300, EQUIPPED WITH: Air Clutch& Brake Variable-Speed Drive Floor Standing CATALOGUE SPECIFICATIONS: Tonnage Capacity. 300 TON. Tonnage Capacity. Short Tons. 330 TON. Stroke Length. 7.87" Die Height. 21.65" Ram Adjustment. Power) 4" Bolster Area. L-R x F-B. 59.1" x 43.3" Bolster Thickness. 7.75" Window Dimension. L-R. 28-3/4" Window Height. 25-7/8" Strokes Per Minute. 30 to 80 SPM. Weight. Approximately. 92000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $129.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
QUOTE# 21264. 150 TON NIAGARA STRAIGHT SIDE DOUBLE CRANK PRESS New 1975. Serial No 48704, Model SC2-150-48-36 EQUIPPED WITH: Air Clutch Straight Side Double Crank Design Variable Speed Drive CATALOGUE SPECIFICATIONS: Tonnage Capacity. 150 TON. Stroke Length. 6" Shut Height to Bed. SDAU) 22" Ram Adjustment. Power) 22" Bed Area. L-R x F-B. 48" x 36" Window Dimensions. W x H. 17" x 5" Speed. Variable. 45 to 90 SPM. Motor. HP/RPM. 40 HP/1770 RPM. Electrical System. 230-460 VOLTS. Machine Height. Shipping. 13'4" Foot Print. 12' x 6' Weight. Approximately. 45,000 Lbs. PRICE: F.O.B. OUR WAREHOUSE. $29.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Please see info below and photos on a 10 Ton Enerpac Dual Cylinder H-Frame Press. This unit is in extremely nice condition and does not appear to have much use on it at all. Please see information and photos below. This Unit is available immediately. I do have the ability to load this on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. 10 TON ENERPAC DUAL CYLINDER H-FRAME PRESS EQUIPPED WITH: H-Frame Design. 2) Enerpac RC1010 Cylinders, Enerpac GP-10S Gauges, 18" x 24" Bed, Adjustable Vertical Height of Bed, Portable It is Mounted on Casters. CATALOGUE SPECIFICATIONS: Tonnage Capacity. 10 Tons. Bed Area. 24" x 18" Maximum Pressure. 10.000 PSI. Maximum Ram Stroke. 10.1" Maximum Height ... moreUnder Cylinder. 44" Minimum Height Under Cylinder. 1" Cylinder Effective Area. 2.25 Sq.In. Oil Capacity. 22 Cu. In. Approximate Machine Dimensions. 24" x 36" Approximate Machine Height. 69" Approximate Machine Weight. 500 LBS. CONDITION: Machine Appears to be in Excellent Condition!
QUOTE# 25623. 150 TON BLISS(EW) STRAIGHT-SIDE TWO POINT VARIABLE SPEED HIGH-PRODUCTION PRESS New 1976. Serial No H-66881, Model HP2-60-36X60 EQUIPPED WITH: Air Clutch& Brake Air Counterbalance Ceico Programmable Cam Switch Variable Speed Drive Power Ram Adjustment w/Indicator Light Curtain Safety Device Operators Control Pedestal Micro-Level Vibration Isolation Pads Recirculating Oil Lubrication System Floor Standing Design CATALOGUE SPECIFICATIONS: Tonnage Capacity. 150 TON. Stroke Length. 3" Shut Height To Bed. SDAU) 14" Ram Adjustment. Power) 4" Slide Area. L-R x F-B. 60" x 24" Bed Area. L-R x F-B. 60" x 36" Window Width. 21" Strokes Per Minute. Variable. 150 to 300 SPM. Motor Horsepower. 20 HP. PRICE: F.O.B. OUR WAREHOUSE. $79.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
60 TON ROUSSELLE STRAIGHT-SIDE TWO POINT PRESS New 1980. Serial No 25424, Model 6SS44 EQUIPPED WITH: Air Clutch& Brake Air Counterbalance Non-Geared 36" Front to Back Feeder w/Durant Counter CATALOGUE SPECIFICATIONS: Tonnage Capacity. Nominal) 60 TON. Stroke Length. 2" Shut Height. SDAU) 12" Ram Adjustment. Power) 3" Ram Area. L-R x F-B. 40" x 14" Bed Area. L-R x F-B. 44" x 22" Bed Opening. L-R x F-B. 36" x 14" Opening Between Uprights. L-R x F-B. 44" x 12" Strokes Per Minute. 110 SPM. Motor Horsepower. 5 HP. Floor Space. W x D. 5' x 3' Overall Height. 9'6" NOTE: Machine Has A Replacement Price Of $55.577.00. PRICE: F.O.B. OUR WAREHOUSE. $9.950.00. Machinery/Equipment Subject to Prior Sale. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e08c53ca2-0xf4-
Quote#16211. 1000 TON URSVIKEN HYDRAULIC PORTAL-TYPE SHIPBUILDING PRESS New 1970/Rebuilt 2008. Serial No. 836, Model VPF1000 EQUIPPED WITH: Double Column Design Synchronous Laterally Sliding Press Unit And Table Swiveling"T"Slotted Upper Platen Hydraulic Lifting Attachment In Table 1 Set of Toolholders CATALOGUE SPECIFICATIONS: Tonnage Capacity. Metric Tons. 1000 TON. Upper Platen Stroke Length. 39.4" Daylight. Ram to Table. 67" Lateral Travel. W/Guide Protections. 134" Lateral Travel. W/o Guide Protection. 173.4" Table Dimensions. L x W. 55.1" x 62.8" Ram Dimensions. L x W. 51.16" x 51.16" Distance Between Pillars. 236.6" Working Height. 25.5" Ram Speed. Rapid Approach. 2.56 IPS. Ram Speed. Pressing. 242 IPS. Ram Speed. Rapid Return. 2.56 IPS. Lateral Travel Speed. 1.97 IPS. Hydraulic ... morePump Motor. Horsepower. 75 HP. Weight. Approximately. 212000 LBS. NOTE: The VPF Type Press Is A Double Column Press For Straightening And Bending Ships' Plates And Similar Items. It Has A Synchronized. Laterally Sliding Press Unit And Table. Because Of This Feature The Press Is Capable Of Covering The Entire Width Of The Plate. This Machine Was Completely Rebuilt In 2008. Price $750.000. All machine/equipment subject to prior sell.
Buffalo 60 ton Iron Worker Serial W-10533. 220/3ph This very nice Buffalo 60 ton Iron Worker just came in from the county. It has never been in the manufacturing business sector and was only used for local government work. It is in Good condition. Below are the Specifications of the machine: SPECIFICATIONS Throat Depth 6" Punch 1" hole in 1/2" 13/8" hole in 3/8" Bar Shear 1 3/8" x 14" 1 1/4" x 10" 1" x 6" Angle Shear 90° Slug Type Sever Cut 3" x 3" x 1/2" 3" x 3" x 1/2" Miter Angle 45° Bar Shear Slug Type 3" x 3" x 1/2" 2" x 2" x 1/2" Channel Shear 4" or 6" standard Coper Notcher 90° For 3" x 3" x 1/2" angle Square Notcher 1 3/4" x 2" x 1/2" Pipe Notcher Sched 40 or 80 1/2" ... more3/4" 1" 1 1/4" 1 1/2" Brake 6" or 9" x 1/2" Strokes per minute(light material) at max capacity) 50 17 Hydraulics 1.000 psi Oil Capacity 15 quarts Motor Standard Optional 3 HP. 3 phase 3 HP. 1 phase Dimensions Width Length Height Bar shear working height Punch table top ht. Cavity table top ht. Notcher station working height 28" 34" 60" 29" 38 1/4" 37 1/2" 22" N42-14 only) Weight(net) 2.000 lbs Buyer to pick up in Norco. CA 92860 or pay for shipping thru Freightquote.com by calling 800-323-5441 x 1118 Michelle Grabber. Iron worker can be bolted to a pallet. Shipping can also be found at Uship.com. I will ship Worldwide by Freight Forwarder using a Container/Boat for transportation to your closest port. Buyer is responsible for all import duties required in his country. Check out my! Be sure to add me to your! Payment will be made by calling 928-899-8208 for payment by Credit Card or Paypal. Items will be shipped as soon as bank confirms payment. Buyer to pay all shipping/freight charges. We can load with forklift if needed. Buyer to find own shipping companies but in the past we have had good rates with
Minster Model P2-60 60 Ton Straight Side High Speed Stamping Press Specifications Tonnage Capacity: 60 Ton, Bolster Size: 32" X 25" Slide Adjustment: 3" Shut Height: 12" Stroke: 2" Strokes Per Minute: 160 Fixed, Equipped With: Dual Palm Controls. Feed Unit, Air Clutch, Air Brake, Air Counter Balance, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Quote# 22313. 5 TON PRECISION"FLEXOPRESS" STRAIGHT SIDE DOUBLE CRANK HIGH-PRODUCTION PRESS New 1965. Serial No 461928, Model SA35 24X18, Series"FLEXOPRESS" EQUIPPED WITH: Air Clutch Double Eccentric Style Crankshaft Precision#RF58-10 Double Feed w/Rotary Cam Lifts And A Feed Vernier(0" to 8" Width Capacity x 0" to 10" Feed Length) 212-17PD Littell Straightener Variable-Speed Drive Knockout Bolster Plate CATALOGUE SPECIFICATIONS: Tonnage Capacity. 35 TON. Stroke Length. 2" Shut Height Adjustable Over Bolster. 9" to 6" Ram Area. L-R x F-B. 21" 18" Die Area. L-R x F-B. 26" x 18" Bed Opening. L-R x F-B. 15" x 9" Bolster Size. L-R x F-B. 24" x 18" Bolster Thickness. 2.5" Window Opening. Width. 9.5" Strokes Per Minute. Variable. 100 to 300 SPM. ... moreMotor Horsepower. 7.5 HP. Overall Height. 10' Weight. Approximately. 12000 LBS. PRICE: F.O.B. OHIO(MONCLOVA) $6.950.00. All machine/equipment to prior sell.
QUOTE#25970. 45 TON PRECISION GAP O.B.I. PRESS New 1996. Serial No 45-PN0062, Model 45NGOBI EQUIPPED WITH: Air Clutch& Brake Palm Buttons Inch. Single& Continuous Modes Vibration Pads CATALOGUE SPECIFICATIONS: Tonnage Capacity. 45 TON. Stroke Length. 3" Shut Height. SDAU) 11" Ram Adjustment. 2.5" Bed Area. 28" x 18" Ram Area. 17" x 13" Throat Depth. 10" Strokes Per Minute. 120 SPM. PRICE: F.O.B. OHIO(MONCLOVA) $17.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Quote# 26449. 250 TON DAKE 2-POST GUIDED PLATEN HYDRAULIC PRESS Serial No. 169893. New 1974, Model 18-494 EQUIPPED WITH: 4-Post Down Acting Design Guided Platen Top Mounted Hydraulics CATALOGUE SPECIFICATIONS: Tonnage Capacity. Stroke Down. 250 TON. Tonnage Capacity. Stroke Up. 98 TON. Stroke Length. Maximum. 24" Daylight Opening. Maximum. 24" Overall Bed Area. L-R x F-B. 103" x 24" Distance Between Posts. L-R x F-B. 77" x 24" Pressing Speed. 8 IPM. Return Speed. 20 IPM. Hydraulic Motor. Horsepower. 10 HP/1745 RPM. Electrical System. 230-460/3/60. Overall Dimensions. W x D. 9'10" x 5'3" Overall Height. 13'1" Weight. Approximately. 31872 LBS. PRICE: F.O.B. OUR WAREHOUSE. $24.500.00. All machine/Equipment subject to prior sell.
Wasino Pux 25 25t Punch Press Runs Excellent! Questions Call Steve@ 866-803-5202 Shipping Quotes Contact SPECIFICATIONS;
QUOTE#24259 20" x 240" THOMPSON"CH" HEAVY-DUTY HYDRAULIC HORIZONTAL-SPINDLE SURFACE GRINDER New 1966. Serial No. 20CH667243, Model CH EQUIPPED WITH: 4) 12" x 60" 240" Electro-Magnetic Chucks w/Neutrofier Travatrol Electonic Cross Feed Reversal Incremental Power Down Feed w/Micometer Back-Up Stop Heaviest Square Type Saddle Construction Hydraulic Head-Mounted Wheel Dresser CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 20" x 240" Height Under 20" Grinding Wheel. 28" Longitudinal Table Travel. Maximum. 268" Grinding Wheel. Maximum Diameter. 20" Grinding Wheel. Widths. 6" Grinding. Hole Diameter. 12" Grinding Wheel Speed. Feet Per Minute. 6000 FPM Incremental Down Feeds. Range. 0002 to.004 IPR Longitudinal Table Feeds. Range. 10 to 100 FPM Power Rapid Table Traverse. ... more240 IPM Grinding Wheel Spindle Motor. 30 HP Overall Dimensions. L x D. 44' x 8'8" Weight. Approximately. 65000 LBS. PRICE: F.O.B. OUR WAREHOUSE. $49.500.00. MACHINE/EQUIPMENT SUBJECT TO PRIOR SALE.
Steel Rule Cutting Die/ Punch Press- Rectangles Description Cutting/ Punching Die Well made in sharp/ good condition This die/punch is made to punch 2 rectangular shapes measuring 4"x8" 4"x8" These dies came from a rubber company that is downsizing. Please feel free to ask any questions. Thanks for looking. for more great items! Payment We accept PAYPAL payments. Please make payments within 36 hours of purchase. Shipping We ship within 48 business hours of cleared payment. We will combine shipping whenever possible with no handling charges. Thanks for looking. Have a great day! txzj pxzj229 txzj-4 txzj1
Bruderer BSTA 10 The MINI Bruderer Technical Specifications Punching Capacity 10 Tons Speed Variable 100-500 SPM Stroke(Adjustable) 0.25 to 1.50 Ram Height Adjustment 1.50 Tool Opening R to L 12.50 to 14.69 Drive 220V 3HP Height 78x24x30 Approx Weight 2500 Electrical 220V. 50 or 60 HZ Control Voltage 24v AC Preliminary specifications are subject to verification All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes Metric Services with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility ... moreof Purchaser and may, at the election of Metric Services, be added to the quoted purchase price and invoiced by Metric Services to Purchaser. The failure of Metric Services to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by Metric Services and Purchaser in writing. Smaller machinery or equipment will be sold with FOB terms with the Purchaser only being responsible for freight charges. A qualified rigger with liability insurance must perform all removal of machinery or equipment when terms are not FOB. No Purchaser will be allowed to load their own machinery or equipment unless proof of insurance is submitted prior and all other factory requirements are met. Loading dock hours are by appointment only. Unless specifically stated in writing by Metric Services, all freight carriers must use flat bed truck only. Some skidding and crating of machinery or equipment can be performed by Metric Services for an additional fee. Upon reasonable notice to Metric Services. Purchaser shall have the right to inspect the equipment prior to shipm
OSTONI COMPLETE WITH TWO-HAND SAFETY DEVICE. FILTER LUBRICATING SYSTEM WITH PRESSURE GAUGE AND BENCH. CE AND USDA APPROVED. IT IS SUITABLE FOR EXECUTING SEVERAL WORKINGS, SUCH AS ASSEMBLY, BLANKING, RIVETING, KEYEING, DRAWING, CAULKING, BENDING, STAMPING, ETC.THE NOT ROTARY SHAFT, MADE IN HARDENED AND TEMPERED STEEL, IS GUIDED BY TWO SELF-LUBRICATING BUSHES AND IT IS EQUIPPED WITH ADJUSTABLE STROKE BY MEANS OF A VENIER PLACED ABOVE THE CYLINDER: IT IS SO POSSIBLE TO CARRY OUT VERY ACCURATE WORKINGS, ALSO OF NOT CIRCULAR OUTLINES AND OF VERY BRITTLE WORKPIECES. OSTONI COMPLETA DI COMANDO BIMANUALE CON DISPOSITIVO ANTINFORTUNISTICO. GRUPPO FILTRO LUBRIFICATORE CON MANOMETERO E REGOLATORE DI PRESSIONE, VALVOLA A 5 VIE, CASSETTA E TAVOLO DI SOSTEGNO, A NORME CE ED USDA. L'ALBERO NON ROTANTE, DI ACCIAIO BONIFICATO, E' GUIDATO DA DUE BRONZINE ... moreAUTOLUBRIFICANTI ED E' DOTATO DI CORSA REGOLABILE MEDIANTE UN NONIO POSTO SOPRA IL CILINDRO: E' COSI' POSSIBILE EFFETTUARE LAVORAZIONI MOLTO ACCURATE ANCHE DI SAGOME NON CIRCOLARI E DI PEZZI ASSAI FRAGILI. OSTONI COMPLETE AVEC DISPOSITIF DE COMMANDE A DEUX MAINS CONTRE LES ACCIDENTS. GROUPE DE FILTRAGE, REGOLATEUR DE PRESSION,ET TABLE, CE ET USDA APPROUVE' L'ARBRE NON ROTATIF, D'ACIER TREMPE' ET RECUIT, EST GUIDE' PAR DEUX BAGUES EN BRONZE AUTOLUBRIFIANTS ET IL EST DOUE DE COURSE REGABLE AU MOYEN D'UN VERNIER PLACE' AU-DESSOUS DU CYLINDRE: IL EST AINSI POSSIBLE D'EFFECTUER DES USINAGES TRES SOIGNEUX, MEME DE PROFILS NON CIRCULAIRES ET DE PIECES TRES CASSANTES.
ROUSELLE 3F 25 TON OBI PUNCH PRESS 2HP 3PH 135 STROKES PER MIN.GREAT SHAPE
SCHMIDT Feintechnik 24-044-03 Pneumatic Press 1850lbs 3" Stroke From our inventory. We are selling a SCHMIDT Feintechnik 24-044-03 Pneumatic Press 1850lbs 3" Stroke. Specifications: Model# 24-044-03 Pneumatic Press More Information: 3" Stroke 1850lbs Capacity RR-3-A Box 3 30 lbs D&S Machined Products focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 30 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment ... moreper eBay’s policy. However. You can use a Credit Card through PayPal as a “one time payment”. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive.
QUOTE#25325. 100 TON BLISS O.B.I. PRESS New 1966. Serial No H55520-1/HP43696, Model 108A EQUIPPED WITH: Air Clutch& Brake Air Counterbalance Bijur Auto Lube System CATALOGUE SPECIFICATIONS: Tonnage Capacity. 100 TON. Stroke Length. 6" Shut Height to Bed. SDAU) 17" Ram Adjustment. 3" Ram Area. L-R x F-B. 61" x 22" Bed Area. L-R x F-B. 76" x 27" Bed Opening. L-R x F-B. 54" x 16" Bolster Area. L-R x F-B. 76" x 27" Bolster Thickness. 2" Strokes Per Minute. 90 SPM. Drive Motor. Horsepower/RPM. 10 HP/900 RPM. Electrical System. 220-440/3/60. PRICE: F.O.B. OUR WAREHOUSE. $12.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Our internal inventory number on this product is To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! DESCRIPTION: You are bidding on a Strippit 18/30 Single Station Punch. We bought from company storage. They said it ran fine, just no longer had a use for it. Below are specs we got ONLINE, please verify independently: Strippit Model Sonic 18/30 Single Station Punch. 30-Ton Capacity. 19" Throat, 1/4" Maximum Material Thickness, 165 SPM, 5 13/32" Shut Height. 3 1/2" Maximum Hole in 3/32" Mild Steel, 3/4" Maximum Hole in 1/4" Mild Steel, Assorted Tooling, Remote Foot Switch, 3-Phase Motor and Controls, Approx 36"x48"x72" ... moreand 3.500 lbs*NOTE* Top Bidder to pay $100.00 Loading& HANDLING + Actual shipping costs from Zip 49534! On Payments under $250.00 we only accept Paypal or certified funds by wire transfer. For payments over $250.00 we prefer Paypal. But will accept other forms of certified funds and company checks(non certified checks held 10 business days for clearance) Good Luck& Good Bidding! Email Nu Tek Sales! OUR RETURN POLICY. We are a WHOLESALER of all types industrial equipment! Usually when you purchase items from us you will be getting anywhere from a 25% 50% discount from what fair market value would be from a used machinery dealer. We will gladly stand behind what we sell. But because of the LOW MARGINS we work with and extraordinary deals we pass on, we can not offer partial refunds on ANY SALES! We gladly offer a 30 day NO QUESTIONS ASKED return privilege. This is a 100% refund of your WINNING EBAY BID, you are responsible for ALL Packaging and Shipping costs! Good Luck. Email Nu Tek Sales! INTERNATIONAL BUYERS READ BEFORE PURCHASING! Our policies have changed: All buyers(except for those in Canada) must send via Paypal a $100.00 deposit upon making purchas
Item 5042 230 Technical Details: 220V/3ph/60hZ Tonnage: 7 Stroke 1st Plunger: 1" Stroke 2nd Plunger: 1½" Transfer Stroke: 2½" Equipped With: Air Feed Work Lamp Note: 2 Available
Sanson Machinery Group is pleased to offer: MULTI-PRESS ABEX DENISON Model FH-20 Date of Mfg: 1974 Serial: 24646 Model FH20 20 Ton Capacity 21” Open Height 12” Stroke 10” Throat with cushion Shadow V light Curtains 550 IPM close 250 IPM press 600 Return + or– 10% Reservoir 85 gallons 3200 lbs 38 L X 60 W X 92” TALL 20 HP Call Sanson today for more information: 1-800-822-8152 www.sansonmachinery.com FOB: Lynnwood. WA
Quote# 26009. 33 TON ABESEIKI HYDRAULIC DIE SPOTTING PRESS New 1988. Serial No 8400606, Model CDS-2015-30S EQUIPPED WITH: Push Button Controls T-Slotted Bed& Ram Lower Platen Sliding Bed Upper Tilting Platen Floor Standing Design CATALOGUE SPECIFICATIONS: Tonnage Capacity. 33 TON. Pull Out Capacity. 14.33 TON. Stroke Length. Maximum. 70.87" Daylight Opening. 70.87" Bed Area. L-R x F-B. 78.74" x 59.05" Windows. Approximately. 30" Wide. Note: Machine Appears To Be In Very Good Condition. PRICE: F.O.B. OUR WAREHOUSE. $89.500.00. All machine/equipment subject to prior sell.
110 ton Minster Model No. 9 OBI Punch Press Specifications and Equipment Tonnage Capacity: 110 Ton, Length of Stroke: 4" Adjustment of Ram: 3.5" Shut Height over Bed: 17.5" Equipped with: Power Ram Adjustment. Air Clutch, Air Counter Balance, Air Knockout Cushion, Dual Palm Buttons, Minster Safety Control, Dies, Plates, Strippits and Punches, Dies, Plates, Strippits and Punches, Counter, Leveling Pads, Machine being sold As Is. Where Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Cadillac Stamping Co. Air Impact Press#52 Standard Serial Number: FF-5806 Power Supply: 110V Developed Impact: 8 Tons with 100# Air Line and 3" stroke. Static Pressure: 500# at 100# air line pressure Air Consumption: 0.020 cu.ft. at 80# air line pressure. 2" stroke. Speeds: up to 10000 strokes per min. Weight: 220lbs Last used in production. Jan 2013. Former liquidated asset of Saturn Industries. Warren MI, USA. Operation Manual Included. Parts. Dies available from Cadillac Marking Div. For an inspection appointment. Please call +1 734 644 1793 Shipping: We will secure to a pallet and load for free. Freight Shipping to be arranged and paid for by buyer. Weight: 220lbs. Class 125. ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e10c2a2bc-0xf9-
Air-Mite Device Inc. DAP 7 Air Arbor Punch Press(Stroke 2" Description Air-Mite Device Inc. DAP 7 Air Arbor Punch Press(Stroke 2" We have tested it and it appears to provide a stamping force of about 1/4 ton. Manufacturer Air-Mite Device Inc. Manufacturer Part Number DAP 7 Item/Ship Weight 151 LBS Tech Condition This item has not been fully tested and is being sold as is. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably ... morenot included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 29952 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an a
SquareTrade © AP6.0 Peddinghaus CNC Duplicator Punch 150TON YA18995 This machine is listed as parts only because it needs a new board. FABRILINE Division of Peddinghaus Corp. GE Mark Century 1050 Control Panel CNC 2 axis positioning system Model: YA18995 Serial: 0-111 150 TON 20" Reach Max Material Thickness: 1 1/4" Positioning Range: 20" x 40" Min Programmed increment: 001" Positioning Accuracy: +/ 010" Full stroke of press ram: 2" Part positioning rate: 500 IPM Max Hole Dia: 1.5" on 1" plate Max Hole Dia: 1.25" on 1.25" plate Hydraulic clamp mechanism 15 HP 230/460v 3Phase Estimated Weight: 15.000 lbs. AB) We strive to deliver 5-star customer service. Bid with confidence! WE SHIP UPS GROUND TO UNITED STATES& WORLDWIDE. LARGE ITEMS WILL SHIP TRUCK FREIGHT. CONTACT US FOR RATE ... moreQUOTES. YOU WILL NEED A FORKLIFT TO UNLOAD. YOU ARE WELCOME TO PICK UP AT OUR NJ FACILITY. M-F 8AM-5PM& SAT 12-NOON. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY YOUR ZIP CODE& ITEM WEIGHT. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS V
USED… K. R. WILSON HYDRAULIC PRESS Type: H-Frame/ Hand Model: 37E Serial Number: 1998 Condition: Good General Specifications: Capacity: 50 Tons/ Hydraulic 3 Tons/ Mechanical Distance Between Uprights: 31" Bed Adjustment: 40" Ram Travel: 7-1/2" Ram Diameter: 2-1/4" Distance Ram toTop of Table: 4-1/2" Minimum 44-1/2" Maximum Approximate Weight: 1.000 Lbs Approximate Dimensions: 48" L x 30" W x 84" H PRICE: F.O.B. Odessa. Florida…$995.00(Plus any applicable taxes.
MINSTER PULSAR MODEL TR2-30 30 TON SGRAIGHT SIDE HIGH SPEED PRESS Serial Number: TR2-30-26965 ONE OWNER MACHINE! Year 1988 Bed Area: 31" x 22" T-Slotted Bolster: 30" x 21" Tonnage Rating: 30 Tons@ 040" Off Bottom Strokes Per Minute: Variable to 0-900 Stroke of Slide: 2" Maximum Adjustment of Slide: 1.75" Shut Height: 6.75" Minimum. 8.50" Maximem Windows: 15 5/8" x 23" Flywheel Type Design Equipped With: Masa DMS-302 Die Monitor System Minster Pulsar Hydraulic Recirculating Lubrication System Hydraulic Clutch 25 HP. 230/460 Volt, 1760 RPM, 3 Phase Motor(Currently Wired for 460 Volts) MINSTER HAS BEEN THE ONLY ONE TO SERVICE THIS PRESS It had acceptable tolerances when last checked by Minster. Dimenstions of Press: 7' 6" FB x 8' LR x 10' 3" H Approximate Total Weight: ... more22.000 Lbs. We are going to start the bidding on this Minster Pulsar Model TR2-30 30 Ton Straight Side High Speed Press at $22.000. USD. We will send the winner an email with payment instructions. Payment to be in the form of a cashier's check, money order or wire transfer. International buyers will need to use a customs broker. Buyer to pay freight. Ask one of your local trucking companies for a LTL, Less than load) rate from zip 48444. Our rigging and loading for this machine is FREE. This would have to be a lowboy because of the height of over ten feet. We load weekdays between 8 am and 2 pm onto an open top truck. No van loading. Should you have any questions. Please feel free to contact us at(248) 892-5233 weekdays between 7 am& 4 pm EST. Time is money. Payment to be made within 5 business days of award and shipment within 7 days. MUST SELL. WE REALLY NEED THE ROOM. Beware of fraudulent second chance offers. Please contact us direct with any concerns. We will not offer any second chance offers. If anyone contacts you. Including eBay, it is not us.
Taber 5 Ton Kenco Kompac Punch Press 5K-7-100 Serial 70-270 Weight: 269 lbs(ADM141 W1 Vidmar L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge ... moreto the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-318
Schmidt Pneumatic Toggle Presses Type 34 with maximum Force at the End of Stroke. Press is in excellent condition with very low hours and minimal use. Some pneumatic controls might need to be upgraded. FeaturesAnti-rotational square ram with fully adjustablegibs for precise travel, no die set required.Exact positioning due to fine adjustment scale(1 division line = 0.05mm)Press Type34Working stroke0- 12mm4- 40mm6- 60mmNominal force28 kNThroat depth131mmThroat depth frame151, 170mmFixture mounting platen suitable forthroat depth frameRam boreØ mm20H7External ram dimensionsG x HØ mm36 x 63Working heightFrame No. 34100- 250mm
SquareTrade © AP6.0 STRIPPIT 30 TON FABRI-CENTER N/C TURRET PUNCH PRESS MOD# FC 1000 III TOOLING Prev Stop Play Next You are bidding on Strippit N/C Turret Press Tooling. Tooling for a Model: FC 1000 III This is very nice tooling in great condition and it is fully guaranteed. Includes all of the tooling shown in the photos. Note: the Cabinet is not included. We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery.
aims CLEAN! HARDINGE#B COMPOUND RADIUS TURNING ATTACHMENT- 001" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Hardinge Brothers of Elmira. New York. This is the Hardinge Compound Cross Slide and Radius Turning Attachment in GREAT condition! Model# B Retails Used for Over $3.499.00! Features: The radius turning attachment for precision turning of concave or convex surfaces up to 1 1/2" radius. Useful for turning punches. Dies, ball shaped valve seats and special spherical cutting tools. The swivel slide is mounted on precision preloaded ball bearings for accuracy and rigidity. The swivel slide moves through 360 degrees. The compound cross slide rest can be applied to the Hardinge Second Operation Lathe. The large diameter feed screws are hardened and mounted ... moreon preloaded ball bearings. The hardinge black and white feed screw dials are 2-1/2" in diameter. Both dials give direct readings in.001" and are adjustable for zero settings. Specifications: Base Cross Slide: Dimensions: 9-1/2" x 4" Travel: 5-1/2" Top Radius Turning Attachment: Dimensions: 9" x 4" Travel: 750" Tool bit: 5/16" x 3/8" Spindle center height from Base: 5-1/4" Overall Dimensions: 13" x 18" x 7" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! HARDINGE#B COMPOUND RADIUS TURNING ATTACHMENT- 001" CLEAN! HARDINGE#B COMPOUND RADIUS TURNING ATTACHMENT- 001" CLEAN! HARDINGE#B COMPOUND RADIUS TURNING ATTACHMENT- 001" CLEAN! HARDINGE#B COMPOUND RADIUS TURNING ATTACHMENT- 001" CLEAN! HARDINGE#B COMPOUND RADIUS TURNING ATTACHMENT- 001" CLEAN! HARDINGE#B COMPOUND RADIUS TURNING ATTACHMENT- 001" CLEAN!
aims NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Di Acro- Houdaille of Lake City. Minnesota. This is a 18-Station Turret Punch Press in GREAT condition. Model# 18-E Stylus Serial# 0660875150 Specifications: Number of Stations: 18. Maximum Material Capacity: 1/8" Punching Capacity: 2" in 16-gauge mild steel. Throat Depth: 19" Punching Speed: Up to 140 holes per ... moreminute. Crankshaft Speed: 245 strokes per minute. Overall Table Size: 60" x 36" Carriage Travel: 19" x 24" Work Piece Size: 19" x 24" Punch Motor: 1/2 Horsepower. 115/230 Volt, 1,725 rpm, 9/4.5 Amp, 60 Hz, Single Phase. Turret Motor: 1/4 Horsepower. 115 Volt, 1,725 rpm, 4.4 Amp, 60 Hz, Single Phase. Overall Dimensions: 62" x 66" x 68" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH P
SquareTrade © AP6.0 VERY NICE THOMPSON 8" X 24" HYDRAULIC SURFACE GRINDER MODEL 2F- 220/440 VOLTS Prev Stop Play Next You are bidding on a Thompson Hydraulic Surface Grinder. Model: 2F. T his is a very nice grinder in excellent condition and it is fully guaranteed. 8" X 24" Walker Ceramax Magnetic Chuck Rapid Traverse: 20 FPM Max Height under 12" Wheel is 12" Variable Table Speeds: 5-75 FPM 29" Longitudinal Travel 9" Cross Travel 3 Phase. 220/440 Volts, 60 Hz We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. Any questions? Email us NO RESERVE Please click here to see my other auctions.
QUOTE# 25965. 75 Ton MINSTER OBI PRESS Serial No. 7-16835. New 1967, Model 7 EQUIPPED WITH: Air Clutch& Brake Flywheel Design Inch. Single& Continuous Operation Wintress Light Curtains Link 1000 Tonnage Monitor Palm Button Controls CATALOGUE SPECIFICATIONS: Tonnage Capacity. 75 TON. Stroke Length. 4" Shut Height to Bed. SDAU) 15" Ram Adjustment. 4" Bed Area. L-R x F-B. 36" x 24" Ram Area. L-R x F-B. 24" x 16" Weight. Approximately. 16500 LBS. Note: Machine Appears To Be In Good Condition. PRICE: F.O.B. OHIO(MONCLOVA) $29.500.00. ALL MACHINE.EQUIPMENT SUBJECT TO PRIOR SELL.
TOLEDO 4-1/2 34.5 TON PUNCH PRESS 3" STROKE AIR CUSHION ​TOLEDO 4-1/2 34.5 TON PUNCH PRESS 3" STROKE AIR CUSHION MIN SHUT HEIGHT: 7-1/4" MAX SHUT HEIGHT: 7-1/4" SERIAL NO: 58248 TABLE: 24" x 17" DISTANCE BETWEEN COLUMNS: 12-5/8" OVERALL MEASUREMENTS: 44" x 52" x 110" PLEASE CALL FOR WEIGHT LOADING FEE: $30 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish ... moreto use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a
TORC PAC 60 TON PUNCH PRESS 13-1/4" SHUT HEIGHT 4" STROKE OF SLIDE ​TORC PAC 60 TON PUNCH PRESS 13-1/4" SHUT HEIGHT 4" STROKE OF SLIDE TABLE: 32" x 20-7/8" x 2-3/4" THICK DRILLED AND TAPPED DISTANCE BETWEEN COLUMNS: 18-7/8" SERIAL NO: 57-8774 STROKES/ MIN: 45- 90 SLIDE ADJUSTMENT: 3 OVERALL MEASUREMENTS: 65" x 51" x 111" PLEASE CALL FOR WEIGHT LOADING FEE: $40 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service ... morePolicy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers
75 Ton NIAGARA Model AF- 4 ½ O.B.I. Flywheel press with air clutch. Rating of press 75 Tons Safe capacity near bottom of stroke 90 tons Diameter of shaft at main and connection bearings 4 ½”6 ¾” Stroke 4” Strokes per Min 42 Ram adjustment 3 3/8” Throat depth 12 ½” Slide area 15” x17 1/8” Distance between gibs 13 ¼” Bed area 36” x 24” Rectangular opening in bed 18” x 14” Width of opening in back 20” Shut height 15 ¾” EQUIPPED WITH: Electro-pneumatic friction clutch and brake Flywheel design Bolster plate Air Counter balance of ram Dual palm controls 7 ½ H.P. 3/60/220-440 variable speed drive w/ controls Dimensions: 66”LR x 90”FB x 129”High Approx. weight: 13.000 lbs.
Manufacturer is dated 1985, Purchased in1993 refurbished, 3 Phase, Flat shear capacity 24" x 5/8" and 16" x 3/4" Angle shear capacity 6" x 6" x 1/2" Cropper capacity 2" round- 2" square, Punching capacity 1 3/16" x 1" Oversize punch attachment, Notcher capacity 1/2" Assorted Punches and Dies 7/16" to 2 1/2" included, New set of round and square dies, Shear Blades are in good condition,
PRICE REDUCED! This is a used Littell 5 Roll Feeding and Straightening Machine. Model 412 HRP, Serial Number 65805-59. The machine has been in storage for a few years. It was removed from service when the company changed product lines. It was working at the time of removal. Basic info on the machine is: Five Straightening Rolls; Diameter of Straightening Rolls is 3.125" Center Distance of Straightening Rolls is 5.5" Pinch Rolls are 4.25" x 12.5" Max Capacity is.090" x 12" or.125" x 4" Minimum Capacity is.042" x 12" Approx Weight of Machine is 2250 lbs. Buyer pays all shipping; Loading is free of charge: $100 fee for skidding and crating for common carrier shipment; Ohio sales tax rules apply; Payment must be received within 5 days of close of sale. Machine is sold as is. Keywords: stock straightner ... morestraightening roll feeder
C100506-P54 JT&M Janesville Tool Air Cylinder Pneumatic Press 528 lbs@ 80psi(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C100506 This JT&M Janesville Tool& Manufacturing Inc. model A-1066 Air Cylinder Pneumatic Press(Capacity: 528 lbs@ 80psi) looks to be in good cosmetic condition. Showing some signs of wear. I hooked it up to my air compressor, and the press shaft extended when the two buttons on either side of the unit were pressed, and retracted when the buttons where released. However, this is the extent of my testing of it, and it is being sold as-is. Approximate overall unpacked dimensions: 21"L x 21"W x 26"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. ... moreAs is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $108.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 67.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verif
HERE FOR SALE THIS AMADA VIPROS KING 358 1995 FANUC 04-PC 58 STATIONS 4 AUTO-INDEX VERY GOOD CONDITION BUYER TAKE CARE OF SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ef5aa12e3-0x107-
ARIES 245. MAX. 20 TON, TURRET PUNCH TURRET STYLE: THICK AXIS DISTANCE: 36" X 50" MAX WORKABLE SHEET SIZE(W/AUTO REPOSITIONING) 36" X 100" MAX SHEET WEIGHT: 110LB 20 STATION- 2 AUTO-INDEX 9 X 1/2" 6 X 1 1/4" 1 X 2" 2 X 3 1/2" AUTO INDEX 2 X 1 1/4" MAX SHEET THICKNESS: 7 GAUGE MILD STEEL TURRET SPEED: 20 RPM NIBBLING HITS PER MINUTE: 300 SPM MAX HIT RATE: 180 HPM CLUTCH/ BRAKE TYPE: HYDRAULIC BALL TRANSFER TABLE ELECTRICAL: 240/3 PHASE- 440/3 PHASE APPROX. DIMENSIONS: 149" X 104" X 77" WEIGHT 21.500LBS This machine have problem with y-axis servo unit
Quote# 26838. 30 TON NISSHINBO"HIQ-1250" 37-STATION CNC TURRET PUNCH New 2000. Serial No HIQH-12016, Model HIQ-1250. EQUIPPED WITH: Nisshinbo PAL-510T 5-Axis Simultaneous CNC Control w/CRT 37-Station"Thick" Turret(Bi-Directional) w/3 Auto. Index Stations 49.2" X 196.85" Sheet Size w/Automatic Repositioning Automatic Sheet Repositioning. CATALOGUE SPECIFICATIONS: Tonnage Capacity 294.OkN 30 TON Material Thickness. Maximum.250" 6.35MM Hole Capacity. Maximum 3.5" 11 GA Hole Capacity. Maximum 88.9MM- 2MM Hole Capacity. Maximum 1.625" 250" Hole Capacity. Maximum 41.3MM- 6.35MM Workpiece Size. Without Repositioning 49.2" X 98.4" Workpiece Size. Without Repostioning 1250MM X 2500MM Workpiece Size. With Repositioning 49.2" X 196.85" Workpiece Size. With Repositioning 1250MM X 5000MM ... moreMaximum Sheet Weight w/o Outboard Tables 397LBS 180KG Hits Per Minute@ 1" Moves 260 HPM Nibbling Hits Per Minute 650 HPM Axis Speeds. Max. 60M/MIN 2400 IPM Auto-Index Speed 30 RPM(Bi-Directional) Overall Dimensions. L x W 17'4" x 14'11" Overall Height 7'5" Weight. Approximately 34,000 LBS. PRICE: F.O.B. OUR WAREHOUSE $39.500.00. All machines/equipment subject to prior sell.
Hydraulic Multipress by Denison Engineering Description: This is a used machine in good working condition it is a little wear on it but in good shape. feel free to contact us for more info. Specifics: 3 Horse Motor Motor rpm: 1800 Tank Capacity 11 Max PSI 970Volts 440 Cycle Bore:3.25 Stroke: 6 Ram Diameter: 2 Throat: 6 60 Cycle 3Phase Daylight 12* We can provide local delivery for a separate discounted price* We can also assist with out of state trucking for an additional cost PLEASE FEEL FREE TO CONTACT US WITH ANY SHIPPING QUESTIONS Phone(562) 927-0020/ email: jiossales@gmail.com
Serial#761151. Motor voltage 220-410, connection voltage 220/0-HZ. This press works like a charm and is reliable. It would be palitized for shipping. Approximate size when shipped 48x40x64(tall) inches. Approximate weight 2300. It is FOB our warehouse here in Lewisville, TX. It is dock high and requires such for pickup. If you have questions you may call 972-221-8665 during work hours or email It is still plugged into the wall should someone wish to come and see it prior to purchase. We bought it for a project and now no longer need it.
2G Deep Throat Gap Press Machine. 15 Tons Brand: Rousselle Model: 2G Deep Throat Gap Press Machine Description: Capacity: 15 Ton- Stroke: 2" Shutheight: 7-3/4" Adjustment: 1-1/2" Bed Area: 11" x 16" Throat Depth: 18" Flywheel Type. Speed: 160 SPM. Motor: 1 HP 115/230 Volt 1 Phase. Air-Actuated Mechanical Clutch. Electric Foot Switch. Weight: 2075 lbs.
L&J 27-Ton OBI Mechanical Punch Press Description: In great working& cosmetic condition! This L&J is pure American made heavy-duty iron. Features include front dual palm. Single& continuous stroke and a 5 HP motor. We are in desparate need of space and need to clear our aisles. So this machine is being offered at a rediculously low reserve. We are selling this machine for a customer who has stored the machine is our warehouse but no longer has use for the machine thus the machine is being sold"as is, where is" and our regular return policy does not apply. We are unable to load this machine due to the weight though we have the resources to a local rigger that will load at a reasonable rate of $200. Check out our feedback& bid with confidence! L&J OBI Inclinable 27-Ton Mechanical Punch Press Manufacturer: L&J ... moreModel: 27 S/N: 35751A Year: 1977 Specifications: Tonnage 27 Stroke 2.5 Slide Adjustment 2" Shut height 8 1/4 Bed 21.5" x 13" Ram 16 x 10 Speed 120 SPM variable Motor 5HP Dimensions appx 51" x 48" x 89" Weight 4.000 lbs Equipped With: Single/ Continuous Setting Dual Palm Control Flyweel Guard Electrical Cabinet The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Any taxes shall be paid by the buyer in addition to the quoted purchase price. DELIVERY DATES: While every e
aims SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Scotchman Industries of Philip. San Diego. This is a used Heavy Duty Hydraulic Ironworker with Attachment and Dies in working condition. Model# 9075 Serial# CA10074P282 Specifications: Tonnage: 90 Tons. Punching: 1-1/8" Throat Depth: 7-3/4" Shear Length: 24" Hydraulics: 2.500 psi. Motor: 7.5 Horsepower. Electrical; 220 Volt. Three Phase, 19.2 Amps, 60 Hz. Overall Dimensions: 29" x 88" x 67" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please ... morecheck out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES SCOTCHMAN 90-TON HEAVY DUTY HYDRAULIC IRONWORKER- 9075 + ATTACHMENTS& DIES Reliable Tool Inc. c 2011 | Powered by
Rousselle No 2 15 Ton 2"stk OBI Punch Press Metal Stamping Die Tool Bending Tested as pictured– Mechanical dog clutch functions in and out positively– Coaster brake holds Motor starter w/therm O/L included Incline adjuster handwheel is broken(see pic. Specifics- Rouselle: Chicago. IL· Model: No 2· Tons: 15· Stroke: 2” Platen Size: 14.5”W.x 11.25”D. Daylight Opening: 10” Throat: 5.75” Die Set Shank Dia: 1½” Motor: 1.5 HP. 1725 RPM, GE, Cont. Duty· Volts: 208-230/460. Amps: 5.8-5.6/2.8, 3Ph· O/A Dimensions: 24”W.x 40”D.x 68”H. Net Weight: 1080 lbs. May be inspected at our facility w/power available PLEASE NOTE WELL: If you don’t have the $$$ to pay for this item within 3 DAYS of purchase– Please DON’T press the“Buy It Now” button. Free Credit and Free“Lay-a-Way” are NOT included. Item will be relisted for ... moresale to a $ buyer if not paid for in 3 days… Free Loading For Buyer Pick Up! OR Add $49 to palletize press on approx. 48”x 48” pallet at approx. 1300 lbs. for pick-up by BUYER’S common carrier(pallet freight) from zip 44440. We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3734 for competitive motor freight rates. Give them our listed pallet size& weight(from our ad) your zip& our(44440) zip code and they can advise their best deal. If you have any questions or want more pictures or information please call us at(330) 652-7535
113 TON MINSTER PRESS THIS MACHINE WAS REBUILD A YEAR AGO. WAS RUNNING BEFORE TAKING OUT OF SERVICE. WE CAN LOAD ON YOUR TRUCK NO CHARGE. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13f9692dc4a-0xf3-
Built by Assembly Technology& Test in Michigan. I couldn't find a date on it but I think its pretty new from the condition. The press is set up with a three position indexing table. Slides side to side. Runs on shop air and 110 volt. Everything works fine. Has a light curtain on front and sides. The TOX Powerpackage is a air over hydraulic cylinder. First one I have had. Its a pretty slick set up. Check out there web sight for details The model type is S30.200.20D-US The S30 stands for 31.1 ton at 90 psi 200 is the stroke 7.87" 20 is the power stroke.787" There are two air valves that control the cylinder. One runs the fast approch at 1483 lbs force. The second brings in the power stroke at 31.1 tons. Return force is 2079 lbs The power stroke comes in automaticly when resistance above the fast approach force is met. The ... morecylinder is rated at 145 psi but they are only running it at 90 psi. See it in operation on you tube video. Its a little over 10' tall. I can take the cylinder off for shipping so it will fit in a standard trailer. I'm 10 miles west of Milwaukee if you would like to inspect or pickup. There is also a light fixture that goes on the machine. I took it off when I transported it. 500 dollar deposit with paypal or credit card. Balance with wire or cashiers check. Check my feedback. I only sell nice equipment. As is Jeff 262 227 7774 open 24/7
aims AMADA PEGA 304050 30 TON CNC TURRET PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST PLEASE BE SURE AND READ ENTIRE AUCTION DESCRIPTION BEFORE BIDDING. MACHINE IS LOCATED AT A FABRICATION FACILITY IN NEWBERG. OREGON( NEAR PORTLAND) AND NOT OUR IRWINDALE, CA. WAREHOUSE. WE ARE LOOKING FOR A QUICK SALE AND REMOVAL. THE WINDOW FOR REMOVAL IS BETWEEN 19TH AND 22ND ONLY. THIS IS A NO RESERVE AUCTION BUT PLEASE BE SURE THE TERMS OF THIS AUCTION CAN BE MET BEFORE BIDDING. Machine just came from a Fabrication shop that had to close its doors. What a great oppurtunity. Yes. Amazingly, this is being offered at $1 starting bid. High bidder wins machine whether its $10 or $100,000! The facility where this is located had to be vacated for the new property owners, thus the need for a ... morequick sale and removal. Take advantage of this situation as you don't get an oppurtunity like this all the time. Machine was being used as shown but the indexing tool motor needs replacement. Was running jobs but they were not using the indexing feature for the two indexable stations. Photos were taken last week when machine was under power. Since then the control has been carefully disconnected to allow removal of other machines in the facility. Please email richard@reliabletools.com with any questions. Machine is being sold as is, where is. Payment needs to recieved after auction closes, next business day is fine and machine needs to picked up between 19th and 22nd of July. Please be prepared to help and make the necessary arrangements to remove machine. There is a local machinery mover that is familiar with the location and the machine. The machinery mover has qouted approx. $3000 to load. Buyer is responsible for loading/ rigging charge and shipping arrangements. You are welcome to use your own preferred mover. Made in Japan By Amada. Model# PEGA-304050. Serial# AK450167 Features: Amada-Fanuc-P System 6M(2) Indexable Tool Stations Auto Sheet Repositioner Pneumatic Punch
aims NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Whitney Metal Tool Co. This is an 18" Deep Throat Mechanical Punch Press in GREAT condition. Specifications: Throat Depth: 18" Throat Height: 7-1/2" Punch Diameter: 1" Die Diameter: 2-3/4" Stroke: 2" Table Size: 12" x 6" Motor: 1 Horsepower. 220/440 Volt, 1,155 rpm, 3.5/1.75, 60 Hz, Three Phase. Electrical: 220/440 Volt. Three Phase. Overall Dimensions: 45" x 26" x 68" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check ... moreout our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS Reliable Tool Inc. c 2011 | Powered by
208v 3 phase Foot Operated Punch Press. AS IS. $500.00 Call 208-286-0460 and ask for Dustin
Nice little punch press.You can hardly hear it runing!115 volts.Has foot switch to trip machine. 1.125 inch stroke,1 inch adj,1 inch shank,4 1/2 x 9 inch bed,4 3/4 shut height.Can skid for shipping no charge.For more info 909-641-2144-don
its is 13"x19" printing& die cutting press very good running condition
Pre Owned 100 Ton Niagara Model IB 65-8-10 Power Press Brake w/ Rockford Part-Revolution Control& Rockford Light Curtain Approximate Overall Weight: 15500 LBS Approximate Overall Dimensions: 124” L X 64” FB X 112” H Unit is located in Kemp. Texas 75143(south east of Dallas, Texas) and can be seen under power with advance notice. Included with the unit is all paperwork/user manuals for the Niagara Press Brake and Rockford systems. See video of this press brake in action. Bending 1/4" steel plate- The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Kemp. Texas. Niagara Model IB 65-8-10 Specs: Capacity(Near Bottom of Stroke) 100 Tons, Capacity(Mid Stroke) 65 Tons, Overall Length of ... moreBed& Ram- 10’ Distance Between Housings- 8.6” Stroke- 3” Adjustment of Ram- 5” Shut Height(SDAU) 12” Strokes Per Minute- 40 Main Motor Horsepower- 7 1/2” Rockford SSC-1500 Press Control: Meets and exceeds OSHA 1910.212. ANSI B11.3 and B11.9 Provides two-hand control safeguarding, Redundant/cross-checking microprocessors, Redundant microprocessor logic power supplies, Redundant solenoid relays, 4-line x 20-character LCD display with 20-key operator interface, Wide range of input power: 85-135V AC, Absolute resolver w/ sync sensor for timing and motion detection, Time-based brake monitor w/ programmable warning and fault set points, Stop-time measurement test, Adjustable sequence stop angle, 6 user-programmable 24V DC static diagnostic inputs, 2 user-programmable 24V DC cyclic die protection inputs, 7-digit stroke and batch counters w/ preset. And a 7-digit total counter, Light curtain interface w/ off/on selector, Light curtain mute during the nonhazardous portion of the stroke, Rockford PSD-400 Light Curtain System: The Rockford system lets people control whether they use hand or foot controls or both. For safety reasons. The light curtain is designed to stop the syst
Nice machine. Comes with loads of extra tooling. Shapes and rounds. The dies in the picture on the left side of the pipe have matching tops and bottoms. The ones on the right side. Don't have matching sets. There might be spares for the ones in the press or for the ones on the left. The machine is missing one upper die holder. I'm 10 miles west of Milwaukee if you would like to inspect or pickup. Will ship. As is Jeff 262 227 7774
WELCOME! ITEM LOCATION: Orem Utah. 84057 ITEM DETAILS TYPE: 18 TON O.B.I. PUNCH PRESS M AKE: BLISS MODEL: 8430 S/N: 3903 CAPACITY: 18 TON SPECS: 28" W* 30" L* 62" T CONDITION: FAIR CONDIT ION. RUNS AND OPERATES SHIPPING: PLEASE SEE THE SHIPPING CALCULATOR IN AD Please see our store for more equipment/ machinery Visit our eBay Store: A VERY SIMPLE MISSION Provide our customers the lowest cost good equipment/ machines. With the best personal service and support you can get. We stake our reputation on your satisfaction. GUARANTEE We do not list items on eBay that we would not buy for ourselves. We evaluate and complete a detailed condition report and pictures on our items to be included in our auction. We provide this service as a convenience to you. As we aren’t able to guarantee everyone’s satisfaction. We must adhere to the ... morestandard“as-is” auction format. Our feedback and reputation is our best guarantee of good value. SHIPPING Buyer is responsible for shipping. However we are glad to assist you should you need it. Packaging We do charge for packaging up items. It is money well spent to ensure that your purchased item gets to you unharmed and in good working order. Here is our charge break down. Boxing: $10.00-$35.00(depending on size of item) Pallet: $35.00-$95.00(depending on size of item) Crating: $95.00- $300.00(depending on size of item) Loading: The first 30 minutes of loading is free any additional time will be charged at $65.00 an hour PAYMENT $900(if item is $1500 or more) PayPal deposit within 24 hours of auction end or 50% of purchase if under $1500 PayPal deposit within 24 hours of auction end. Balance due by PayPal. Wire transfer, credit card by phone or cash in person within 7 days of auction end. Contact us at 1-801-787-5868 with your information for your documents and we will promptly fax or email them to you. Thank you. TAX Sales are transacted at our Home Office in Orem. Utah. Utah resident buyers pay State Sales tax. Out of Utah buyers are tax exempt. RESERVES Some auctions wi
aims AMADA PEGA 204040 22 TON CNC TURRET PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST PLEASE BE SURE AND READ ENTIRE AUCTION DESCRIPTION BEFORE BIDDING. MACHINE IS LOCATED AT A FABRICATION FACILITY IN NEWBERG. OREGON( NEAR PORTLAND) AND NOT OUR IRWINDALE, CA. WAREHOUSE. WE ARE LOOKING FOR A QUICK SALE AND REMOVAL. PLEASE BE SURE THE TERMS OF THIS AUCTION CAN BE MET BEFORE BIDDING. Machine just came from a Fabrication shop that had to close its doors. The facility where this is located has to be vacated for the new property owners. Thus the need for a quick sale and removal. Take advantage of this situation as you don't get an oppurtunity like this all the time. Photos were taken last week when machine was under power. Machine was running jobs up until a few weeks ago. ... moreNo know issues and everything appears to be functioning as it should. Please email richard@reliabletools.com with any questions. Machine is being sold as is, where is. Payment needs to recieved after auction closes, next business day is fine and machine needs to be moved quick. Please be prepared to help and make the necessary arrangements to remove machine. There is a local machinery mover that is familiar with the location and the machine. The machinery mover has qouted approx. $3000 to load. Buyer is responsible for loading/ rigging charge and shipping arrangements. You are welcome to use your own preferred mover. Made in Japan By Amada. Model# PEGA-204040. Serial# AP440085 Features: Amada-Fanuc-P System 6M(2) Indexable Tool Stations Auto Sheet Repositioner Pneumatic Punch Die Extractor Specifications: Capacity. 22 Ton Table Size. 39" x 81" Ball-Top Table Thickest Material. 1/4" M.S. Max Sheet Weight.110 lbs. X and Y Travel. 43 1/4" X. 41" Y Number of Stations. 24 Station Turret Maximum Speed. 350 SPM Axis Speed. 2000 I.P.M. Turret Speed. 30 R.P.M. Standard Control.
Recently serviced and tuned. Has 80 gallons of fresh oil and comes with a lot of extra dies. All that is missing to make this baby run is the software. Details 21 Station Turret Model# TP-2525-IF2 Punching Force 33 Ton Maximum Material Thickness 5/16" Max. Working Area 48" x 100" Max. Sheet Weight 440 Lbs. Table Travel 51.8 X 101" X-Axis Traverse Speed Max. 3150 IPM Y-Axis Traverse Speed Max. 2362 IPM Hits Per Minute On 1" Centers 300 Hits Per Minute Nibbling 600 Siemens Sinumeric 3N CNC Control Fully Programmable Depth& Stroke Length 21 Station Turret(Amada Thick) 3) Auto Index Stations(3) Multitool Stations Please call to arrange shipping(818) 768-5924
Niagara 50-Ton Mechanical Punch Press. NO RESERVE Description: In great working& cosmetic condition! This Niagara is pure American made heavy-duty iron. Features include front dual palm& foot control. Single& continuous stroke and a 7.5HP motor. We are in desparate need of space and need to clear our aisles. So this machine is being offered at a rediculously low reserve. We are selling this machine for a customer who has stored the machine is our warehouse but no longer has use for the machine thus the machine is being sold"as is, where is" and our regular return policy does not apply. We are unable to load this machine due to the weight though we have the resources to a local rigger that will load at a reasonable rate of $550. Buyer responsible for all loading& transportation costs. Check out our feedback& bid ... morewith confidence! Niagara 50-Ton Mechanical Punch Press Manufacturer: Niagara Model: M-45 S/N: 53014 Year: 1988 Specifications: Tonnage 50 Stroke 3.5" Shut Height 12" Slide Adjustment 2-5/8" Bed Area 28" x 18" Slide Area 12" x 14" Throat Depth 9" Opening Thru back 14" Speed 60-180 spm Dimensions Appx 50" x 62" x 110"H Weight Appx 7.000 lbs Equipped With: Air Clutch& Brake Dual Palm Controls Continuous Setting Auto Lube System 7.5HP Motor Inching Flywheel Guard Clutch Control Full Enclosure Foot Control The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to th
Bliss#28 Open Back 93-Ton Inclinable Press. No Reserve! Description: In great working& cosmetic condition! This Bliss is pure American made heavy-duty iron. Features include open back inclinable. Front dual palm control, front saftey guard and a 10HP motor. We are in desparate need of space and need to clear our aisles. So this machine is being offered at a rediculously low reserve. We are selling this machine for a customer who has stored the machine is our warehouse but no longer has use for the machine thus the machine is being sold"as is, where is" and our regular return policy does not apply. We are unable to load this machine due to the weight though we have the resources to a local rigger that will load at a reasonable rate of $650. This machine is a monster. Buyer responsible for all moving costs incurred. Check out ... moreour feedback& bid with confidence! Bliss 93-Ton Open Back Inclinable Press Manufacturer: Bliss Model: 28 Year: 1950 Specifications: Bed Area 37 x 29 Ram Area 21" x 14" Shut height 14" Stroke 8" Tonnage 93-Ton Strokes per minute 35 Motor 10HP 3/60/220/440 Appx Weight 20.000 lbs Appx dimensions 95" x 70" x 135"H Equipped With: Air-Clutch Front Enclosure Open Back Inclinable Single Back Gear Front Dual Palm Controls The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. A
This is a good working Di Acro turret punch press. Model VT-199. It has 18 punch stations, and I believe it is rated at 20 tons, but I could be wrong. It weighs around 2000 lbs, and it is currently on a very heavy duty roll stand, so that we can roll it around, if needed. The stand goes with the punch press. It can easily punch 3/8" holes in 1/8" thick steel. and is perfect for sheet metal punching. The motor is powered by 240 volt AC. This punch press also has dual air powered finger grips, to hold the metal that is being punched. We're cleaning up the shop, and since we don't use it much, we can let her go to someone who can put her to good use. There are punch dies in the machine, and plenty more in a box. Di Acro is still in business, and punches are still being made for this machine. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1402293ad38-0xfa-