In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
1800.00
Buy It Now
Condition: Used
Location: Muskegon, United States
Up for sale is a good used Bimba Pneumatic Forming Punch Press Bore 8 - 19,000lb Capacity. These units are custom made and very heavy duty. We have many ... moreavailable as well as different tonnage. The item received may not be the exact item pictured but all are in like condition.
$
1200.00
Buy It Now
Condition: Used
Location: Muskegon, United States
Up for sale is a good used Bimba Pneumatic Forming Punch Press Bore 5 at 3,000lb Capacity. These units are custom made and very heavy duty. We have many ... moreavailable as well as different tonnage. The item received may not be the exact item pictured but all are in like condition.
$
1700.00
Buy It Now
Condition: Used
Location: Muskegon, United States
Up for sale is a good used Bimba Pneumatic Forming Punch Press Bore 6 - 10,000lb Capacity. These units are custom made and very heavy duty. We have many ... moreavailable as well as different tonnage. The item received may not be the exact item pictured but all are in like condition.
$
2200.00
Buy It Now
Condition: Used
Location: Muskegon, United States
Up for sale is a good used Bimba Pneumatic 2 Process Forming Punch Press Bore 5 - 3,000lb Capacity. These units are custom made and very heavy duty. We ... morehave many available as well as different tonnage.
$
120.00
Buy It Now
$6.16 Shipping
Condition: Used
Location: Appleton, United States
Set of 5 used punch and die for Roper Whitney No 16 Bench Punch. Sizes are 3/32 , 7/32 , 1/4 , 5/16 and 11/32
$
149.99
Buy It Now
$16.25 Shipping
Condition: Used
Location: Garden Grove, United States
MUBEA KBL16-135 640 Punching Machine Tool Seat?.
$
2300.00
Buy It Now
$500.00 Shipping
Condition: Seller refurbished
Location: Peoria, United States
It had no issue punching through 16ga and I don't see why you couldn't do this with others if you wanted. 15 Total punches installed leaving three empty ... moreslots. Diamond Shape.
$
15.95
Buy It Now
$3.95 Shipping
Condition: Used
Location: Andover, United States
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Kent, United States
OPEN SHUT HGT 5 1/2.
$
999.00
3d 17h 43m 41s
0 bids
Condition: Used
Location: Otsego, United States
This is a ROUSELLE 5 ton punch press. It has a Dayton motor. It measures: 62" high. 26 1/2" deep and 3" high. Shipping costs and arrangements ... morewill be determined when the machine is sold.
$
103.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
VEVOR CH-60 Hydraulic Busbar Hole Puncher 31 Ton Knockout Punch Set Max 10mm. VEVOR CH-70 Hydraulic Busbar Hole Puncher 35 Ton Knockout Punch Set Max ... more12mm. Top-Grade Vertical Pneumatic Punch Press Machine.
$
664.95
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
2205Lbs/1000kg Pneumatic Punch Machine. Power Type: pneumatic. Easy to adjust output, simply adjust the air pressure to reach the desired pressure is ... moreadjustable, high yield. Equipped with anti-rotation guide rods, guide plate, high precision, able to adapt to high-speed precision punch overload.
$
750.00
Buy It Now
$203.65 Shipping
Condition: Used
Location: Yorktown, United States
Actual item pictured. You should be able to make a handle out of a piece of pipe that you thread.
$
495.00
Buy It Now
Condition: Used
Location: Middletown, United States
Wow! Great looking! 1 Littell Uncoiler unwinder Chicago Automatic punch Press Feeder 300Lbs Cap Up for bidding a#1 Littell Uncoiler unwinder Chicago Automatic ... morepunch Press Feeder 300Lbs Cap MODEL#1 in perfect working condition please see all the pectures For more info on machine specification please see pitures Come with very items you see. please don't be shy. but be fair. but make me an offer. no seas tímido por favor. pero sea justo. pero hazme una oferta. APPROXIMATE WEIGHT. 500 LBS local pick up OK it is over 500 Lbs from zip. 91706 Local pick up OKAY or if need to ship or load it please add a $125.00 for special pallet or crate Bid with confidence- Check My feedback Any question 626 536 6202 Thanks for being happy buyer“MAY GOD KEEP ON BLESSING AMERICA” High bidder to secure own shipping including quotes. Please have your freight company Email Me a completed prepaid"bill of laden" and all necessary paperwork to mikemolina@roadrunner.com For quote info: 40" x 48" x 50" high and is abouth 500 Lbs From Zip Code 91706 freightquote com or call 1.800.323.5441 ext.1588 check with Mr. Jose
$
169.95
Buy It Now
$25.00 Shipping
Condition: Used
Location: Santa Rosa, United States
Used. As pictured. This listing is for 1 item. I have 6 available.
$
216.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
A good pneumatic punch press machine can undoubtedly help you solve many problems in work or life. Power Type: Pneumatic. Working Assistant: With a workforce ... moreof 440lbs and a table area of 5.91 5.31in you can operate with ease.
$
447.32
Buy It Now
Condition: Used
Location: Middlebury, United States
Country of Manufacture: N/A. Air Mite press possibly model 19. Unless otherwise specifically agreed to in writing by. To get a freight quote we will need ... moreto know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
$
40.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Monteview, United States
This heavy-duty punch press from Mate is a top-quality machine designed for industrial-grade tasks. With a .407 model number, it boasts high precision ... moreand reliability, making it the perfect tool for professionals in the metalworking industry. Its brand, Mate, is synonymous with top-notch quality, ensuring that you get the best value for your investment.This punch press falls under the CNC, Metalworking & Manufacturing category and is specifically designed for use in Punch Presses. Its 1-4065 capability ensures that it can handle even the toughest of jobs with ease. Whether you're looking to expand your metalworking business or simply need a reliable tool for your personal projects, this Mate Heavy Duty Press Punch .407 is an excellent choice.
$
6.89
Buy It Now
$4.00 Shipping
Condition: Used
Location: Diamond Point, United States
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. ... moreCraft, Technical Magazines. grandpas_secrets Store for lots more great Items. Bench Punch How-To build PLANS Holes up to 3/8 in 22ga Plans to build a Bench Punch- this lever operated punch will make a clean. True hole in sheet metals up to 22 ga. in sizes up to 3/8" 2 1/2" reach from metal edge- and a 12" throat. Made from stock materials. Machining of parts is needed. This is an original 3 page magazine article from 1959. We do not photocopy these. Article Includes Measured Drawings and Diagrams, Complete Instructions, SHIPPING TERMS: Buyer to prepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority mail service. Add $1.75 to total if you would like insurance with delivery confirmation. $3.00 for shipping to Canada. $5.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Kent, United States
OPEN SHUT HGT 5 1/2.
$
45.00
Buy It Now
$25.00 Shipping
Condition: Used
Location: Mountain Home, United States
Video) http:www.youtube.com/watch?v=BafI3u9x-YU BRAND, Amada, Model, 244 Pega. CNC Turret Punch Press Machine, Pressure, Max. 20 Ton, YEAR, 1987. 244 ... morePega. CNC Turret Punch Press Machine, Max. 20 Ton Brand: Amada Model: 244 Pega Year: 1987 CNC TURRET PUNCH PRESS MACHINE• Press capacity 20 ton• Maximum hole diameter 3.5" Maximum sheet size 20" 40" 40" Maximum sheet thickness. Mild steel 1/4" Maximum sheet weight 110 Lbs. Maximum table speed. X& Y 2,000 I.P.M. Strokes per minute on 1" centers 200• Strokes per minute 350• Turret rotation speed30 R.P.M. Equipped With• Hydraulic clutch• AMADAN(FANUC) AC servo motors for all axes• 36) Station bi-directional thick turret with(2) auto index stations• Built-in ball transfers in table• Automatic sheet repositioning• Scrap chute• Dual work clamps with remote electric foot pedal control• Assorted punch tooling as shown in photos• 3 H.P. 3/60/230-460 volt hydraulic pump motor• 7-1/2 H.P. turret press motor• Approximate Weight: 20.000 Lbs. Approximate Dimensions: 170" L-R x 93" F-B x 78" H Condition: Very Good. PAYMENT: Cash. Cashier Check or Money order, PayPal not Accepted For any question contact me by E-Mail Buyer is respond for shipping cost. Sold as is. No guarantee no money back. We have more equipment for sale If you need any machine. Please give me the opportunity to make a budget, send me a E-Mail:
$
37.99
Buy It Now
$9.60 Shipping
Condition: Used
Location: Mc Lemoresville, United States
Up for sale is a setup gauge for a strippitt punch press, does have a fair amount of scuffs and scratches. See pictures for details
$
35.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Monteview, United States
This pack of 5 Mate Precision Tooling Punch Press Parts with a diameter of .433 and model number 1-4806 is a must-have for any workshop dealing with CNC ... moremetalworking and manufacturing. The parts are specifically designed for use with punch presses, ensuring accuracy, precision, and seamless operation. Crafted from high-quality materials and manufactured to meet the highest industry standards, these Mate Precision Tooling Punch Press Parts are built to last, and are compatible with a wide range of metalworking equipment. Whether you're a professional metalworker or a DIY enthusiast, these parts will help you achieve flawless results every time.
$
79.99
Buy It Now
Free Shipping
Condition: Used
Location: Kent, United States
STRIPPIT 8BN 3/4 P METAL STAMPING PUNCH C-FRAME KEY HOLED DIE BRAKE UNIT
$
350.00
Buy It Now
Condition: Used
Location: Oxnard, United States
$
3999.99
Buy It Now
Condition: Used
Location: Watertown, United States
$
625.00
3d 4h 3m 6s
0 bids
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Power Type: pneumatic. Easy to adjust output, simply adjust the air pressure to reach the desired pressure is adjustable, high yield. Equipped with anti-rotation ... moreguide rods, guide plate, high precision, able to adapt to high-speed precision punch overload.
$
50.00
4d 12h 58m 10s
0 bids
$48.88 Shipping
Condition: Used
Location: Beebe, United States
This vintage Roper Whitney No. 8 medium duty portable metal punch is a high-quality tool for metalworking. It is perfect for those in the CNC, metalworking, ... moreand manufacturing business. The brand speaks for itself with Roper Whitney being a trusted name in the industry. This punch press is versatile and can be used for a variety of projects. It is made with durable materials that ensure it will withstand heavy use. Whether you are a professional metalworker or just starting out, this punch press is a great addition to any workspace.
$
202.35
Buy It Now
$15.00 Shipping
Condition: New
Location: Chino, United States
Package Included 1* Pneumatic Punch Press Machine 1* Air Handler 1* English Instruction Notes Please read the instructions carefully before use and pay ... moreattention to the safety matters inside. Please keep your hands out of the work area and please do not use a wrench to tighten the adjusting nut. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
$
999.00
Buy It Now
$175.75 Shipping
Condition: Used
Location: Marietta, United States
Plc From A Trumpf 240 Punch Press plc
$
1249.00
Buy It Now
Condition: Used
Location: Hulbert, United States
We will provide any information needed. We are not experts in these fields and so may not be able to give you the answers you require.
$
950.00
Buy It Now
$45.00 Shipping
Condition: Used
Location: Salt Lake City, United States
Multicyl DX252816 Double Action Hydraulic punch press cylinder. Pre-owned, shows some scuffing and cosmetic wear. Threading shows some wear from shipping ... more(as pictured) but still functional. Does not include any accessories, mounting nut is not present.Specs are as follows 12.5 @ 120 PSI10.5 @ 100 PSI8.5 @ 80 PSI3-1/4" OVERALL STROKE1/2" POWER STROKE12 1/2 TON MAX OUTPUT30 STROKES PER MINUTEApprox Retail $7,200
$
125.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Gilbert, United States
Strippit C-Frame Tooling Press Brake Unit 8BL3 complete w/ Punch and Die
$
89.99
Buy It Now
Free Shipping
Condition: Used
Location: Kent, United States
STRIPPIT 8BN 3/4 P METAL STAMPING PUNCH C-FRAME KEY HOLED DIE BRAKE UNIT
$
119.99
Buy It Now
Free Shipping
Condition: Used
Location: Forked River, United States
What is the history of the item?. We test each item thoroughly and picture their current condition.
$
1250.00
Buy It Now
Condition: Used
Location: Aiken, United States
Appears to be in good working order. Item was bought at factory closing sale.
$
228.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Package Included 1* Pneumatic Punch Press Machine 1* Air Handler 1* English Instruction Notes Please read the instructions carefully before use and pay ... moreattention to the safety matters inside. Please keep your hands out of the work area and please do not use a wrench to tighten the adjusting nut. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
$
7.89
Buy It Now
$4.00 Shipping
Condition: Used
Location: Diamond Point, United States
Plans to build a miniature Punch Press. Using this handy punch with its interchangeable punches and dies makes quick work of putting small holes in thin ... morematerials, heading rivets, forming wire into rivets, stamping, gasket making, and driving gears on or off shafts.
$
196.00
Buy It Now
$13.05 Shipping
Condition: New – Open box
Location: Los Angeles, United States
The plates are made to high standards and will help improve efficiency and productivity in your workplace.
$
216.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Package Included 1* Pneumatic Punch Press Machine 1* Air Handler 1* English Instruction Notes Please read the instructions carefully before use and pay ... moreattention to the safety matters inside. Please keep your hands out of the work area and please do not use a wrench to tighten the adjusting nut. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
$
1350.00
Buy It Now
$500.00 Shipping
Condition: Used
Location: Farmington, United States
574-825-4990 SKU: 59541 Press Rite Mechanical NO.0 5 Ton OBI Punch Press 4" Throat 1" Stroke 1/2HP. Brand: Press Rite Size: Length: 41 in. Width: ... more38 in. Height: 69 in. Condition: Used Model: Mechanical Country of Manufacture: United States Consigner: B Items in Lot: 1 Lister: 8 MPN: NO.0 Weight(lbs. Oz) 427.0 Ser. 6538. 5 Ton. 1" stroke. 4" Throat depth. 7-1/4"FB X 8-1/4"w Table. Mechanical Foot Trip. Open-Back-Inclinable(OBI) 1/2HP- 115V motor. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or as
$
175.00
Buy It Now
Free Shipping
Condition: Used
Location: Scribner, United States
C- Frame Punch, Unipunch 8AJ 1-1/2 ( Lot Of 3 ). These Punches appear to be in good condition, they came from a machine shop retirement sale. You need ... moreto look at the pictures and decide for yourself.
$
400.00
Buy It Now
Condition: Used
Location: Oxnard, United States
$
40.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Monteview, United States
This precision tooling press punch, model .407, is designed for heavy duty use in industrial settings. Crafted by Mate, a trusted brand in metalworking ... moreequipment, this piece is perfect for use with heavy duty punch presses. With its durable construction and precise design, this punch press can handle even the toughest of materials. Ideal for use in metalworking, manufacturing, and CNC settings, this punch press is an essential tool for any professional looking to increase their productivity and efficiency. Get the job done right with this high-quality Mate press punch.
$
1750.00
Buy It Now
$22.59 Shipping
Condition: Used
Location: Hayden, United States
$
1550.00
Buy It Now
$500.00 Shipping
Condition: Used
Location: Farmington, United States
PRESSRITE 5ton obi press. 1.25" stroke, 4" Throat, 5 ton. Works great, comes with Dayton electric motor so it's standard 110volt plug in. Nice foot pedal ... moreto activate. Electric over air actuation. Does not come with the stabd it's on just the press. This press must have safety guards installed to safely use per osha.
$
1500.00
Buy It Now
Condition: Used
Location: Niles, United States
Strippit 15B Punch Press. Hydramatic Head. 8" Table with Adjustable Fences. Machine No. 189.
$
40.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Monteview, United States
This Mate Precision Tooling Press Punch is designed to deliver precision and accuracy in your metalworking projects. Made for use with a variety of materials, ... moreit is perfect for those in the CNC, metalworking, and manufacturing industries. The .433 HD model is specifically tailored to meet the needs of your business. Crafted by the trusted brand Mate, this Punch Press is the ideal choice for those looking for a reliable tool that delivers outstanding results. Whether you are working on a small or large-scale project, this precision tooling press is sure to get the job done. Invest in the Mate Precision Tooling Press Punch today and take your metalworking capabilities to the next level.
$
39.00
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
2 sets available with Stripper Plate. Made in the USA, it is designed to withstand heavy use and provide accurate results. This die and stripper plate ... moreis made to exacting standards, ensuring that your finished products are of the highest quality.
$
34.00
Buy It Now
$9.94 Shipping
Condition: New
Location: Los Angeles, United States
$
200.00
Buy It Now
$125.55 Shipping
Condition: Used
Location: Carey, United States
The double crank handle drive provides easy operation. The body is ductile iron and wearing parts are hardened and ground. Price includes 1/4" Round Punch ... moreand Die Set unless other size is specified.
$
1150.00
Buy It Now
Free Shipping
Condition: Used
Location: Groveland, United States
Use in good working condition. See picture for info. New punch and dies are available from Whitney.
$
2999.99
Buy It Now
Condition: Used
Location: Watertown, United States
This press has seen less than 6 months service. It's old but mechanically very tight and in excellent condition. It's fitted with a 3/4 H.P DC ... moremotor( 110 V) with speed control.
$
1300.00
Buy It Now
Free Shipping
Condition: Used
Location: Hartland, United States
Used Perkins Junior Bench Top Small OBI Stamping Punch Press 1 PH 120 Volt. Really nice shape in working condition, minimal use. Or we can get you a price ... morequote on pallet freight to your location.
$
6.00
Buy It Now
$6.75 Shipping
Condition: New – Open box
Location: Robbinsville, United States
$
5499.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Country of Manufacture USA. This unit sits on a 6.25 base. Has fork pockets. Model No 24. LET'S STAY IN TOUCH. Part Number N/A. Ending Soon. We are dedicated ... moreto understanding the unique challenges and opportunities that each industry faces.
$
8166.51
Buy It Now
Condition: Used
Location: Middlebury, United States
Weight (lbs, oz): 10000. Country of Manufacture: United States. Main motor forward /reverse button broken. Light curtains light up but do not stop press. ... moreUnless otherwise specifically agreed to in writing by.
$
80.00
Buy It Now
Free Shipping
Condition: Used
Location: Oxford, United States
The sizes are 4 1/4", 4", 3 7/8", 3 3/4", 3 1/4", 3 3/16". These are sold as individual sets.
$
175.00
Buy It Now
$78.37 Shipping
Condition: Used
Location: Bridgewater, United States
No dies included
$
216.60
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Package Included 1* Pneumatic Punch Press Machine 1* Air Handler 1* English Instruction Notes Please read the instructions carefully before use and pay ... moreattention to the safety matters inside. Please keep your hands out of the work area and please do not use a wrench to tighten the adjusting nut. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Perkins 3 Ton OBI Punch Press Etco Wall Plug Power Cord Prong Punch Crimping Die
Here’s a nice. Little, lightly used, 3 Ton Perkins Junior Punch Press that was only used to crimp brass wire terminals- Not Punch Holes in Steel Plate… It includes an Etco“power cord prong crimping die” with strip feed that is fully functional. Electric solenoid actuated(GE. 115V) single stroke, dog clutch Includes belt& flywheel guarding with door safety switch. AB Motor Starter w/Therm. Prot. missing cover) FPE S/P Fuse Disconnect and 115V Work Light. Perkins Junior OBI Punch Press· Capacity: 3 Ton· Model: JR. Serial: 44057· Stroke: 1.125” Shank: 1” Ram Adj: 1” Shut Hgt. Over Bed: 4” Bed Area: 5½”x 9” Motor: GE. 1/3 HP, 1725 RPM, 115V, 6.4A, 1 Phase· Etco Crimp Die Tooling; Warwick. R.I. Model: B817/ 8935· Etco Press No: 44057· Net Weight: 203 lbs. as pictured) Fully Tested– Quiet. Tight& Fast– ... moreFully Guaranteed. May be inspected under power at our facility. If you don’t have the $ to PAY FOR this machine within 3 days of purchase- please Don’t press the“COMMIT TO BUY” button. Free Credit and Free Lay-a-way are not offered or included. Free Loading For Buyer Pick Up! OR $29 to palletize press on approx. 36”x 36” pallet at approx. 250 lbs. for shipping by buyer’s common carrier from zip 44440 We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3734 for competitive motor freight rates. Give them our listed pallet size& weight(from our ad) your zip& our(44440) zip code and they can advise their best deal. Many Thanks, Tom/ Lloyd If you have any questions or want more pictures or information please call us at(330) 652-7535
ELMEG TYPE III 3500 ELECTRIC PUNCH PRESS
ELMEG TYPE III 3500 ELECTRIC PUNCH PRESS Click Images to Enlarge ​ ELMEG ELECTRIC PUNCH PRESS PREVIOUSLY USED TO PUNCH THE CENTERS ON ALBUMS TYPE III 3500 VOLTS: 220 SERIAL NO: 13140 JAHR: 66 TABLE: 14.5" x 13" THROAT: 10-1/4" HEAD HEIGHT ADJUSTMENT: 3-3/4" TABLE HEIGHT: 34" APPROXIMATE RAM DIAMETER: 3-1/4" OVERALL MEASUREMENTS: 29" x 18" x 61" TALL WEIGHT: 881 LBS LOADING FEE: $20 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship ... moreto: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verification of payment status which could be credit card or any other
Midland Ross 3803 Press Punch
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL BEN- 1-866-MHZ-ELEC- Midland Ross® 3803 Press Punch comes with what you see in the pictures. If you don't see it. You probably won’t get it. Specifications are from manufacturer and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. Model Number: 3803 Serial Number: 364 Condition: Used Disclaimer: All items are ... moresold as is and untested in fair to excellent condition. Returns are not and will not be allowed for these items. For More Pictures Please Click the Following: The charge for freight will be determined by the destination upon the ending of the auction. There will be a packing fee on larger and heavier items it will be determined by the size and the care that has to go into packing an item. Most of the time. People are impressed with the job we do because we customize our own skids for larger items and we take the utmost care to provide a safe and cozy journey for your item. We strive to make our customers happy and want you to feel that we have treated you with the ultimate respect. If you have any questions please call Bennie at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. 04/30/2012 BL Powered by The free listing tool. List your items fast and easy and manage your active items.
Thor 10 Station Rotary Punch 1210 1/8 to 1" Real sharp
Nice looking machine. All original. 14 gauge mild steel. Will ship. I'm 10 miles west of Milwaukee if you would like to inspect or pickup. As is Jeff 262 227 7774
50 Ton Hydraulic Punch Press
Floor type. Dual Head, motor driven, hydraulically operated machines of"C" frame construction which have been designed to be used with a single or multiple cutting die to cut cloth, paper, wood, plastic or similar materials.
Strippit FC 1000 Turret Punch Press
Strippit Turret punch press FC-1000.Punching capacity 30 Tons. Includes Tool holders. Call Dave 321-289-7713 if you have any questions or email.
Rousselle SS-30-80 Double Gear Straight Side 80 Ton Punch/Perf Press 10S80
Rousselle SS-30-80 Double Gear Straight Side 80 Ton Punch/Perf Press 10S80 NICE USED PRESS WITH ALLEN-BRADLEY CONTROLS. LUBE SYSTEM, AND LIGHT CURTAIN SAFETY SYSTEM. EVEN INCLUDES A MANUAL. THE RAM MEASURES 20.5" X 80" AND THE BED IS 30" X 80" WITH T-SLOTS ON 10" CENTERS. THE TAG WITH THE RAM INFORMATION IS MISSING BUT AS WE HAVE A SIMILAR PRESS THE INFO SHOULD BE SIMILAR AND IS LISTED BELOW. IF YOU NEED EXACT SPECIFICATIONS, PLEASE CONTACT ROUSSELLE. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 10S80 SERIAL# 11697 OTHER: 460 VOLT. 3-PHASE STROKE: 6(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) SHUT HEIGHT: 7.25(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) ADJUSTMENT: 4(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) STROKES/MINUTE: ... more50(FROM SIMILAR PRESS AND MAY NOT BE CORRECT) OVERALL DIMENSIONS: WIDTH: 5' LENGTH: 112" HEIGHT: 143" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $5.00 HANDLING CHARGE FOR ALL DOMESTIC UPS AND USPS PACKAGES. $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES, AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBL
Hidaka Mark 45 Ton Punch Press
HIDAKA Punch Press Model: Mark-45• Serial Number: 113• Mfg: 7/85 SPECIFICATIONS: Capacity. 45 Tons• Stroke. 4¾" Strokes per Minute Variable. 50-120• Adjustment of Ram. 2 1/ 3" Shut Height. 10¾" Bed Area: Left to Right. 32" Front to Backe. 15¾" Motor. 5 HP
Rousselle S2-30-100 Double Gear Straight Side 100 Ton Punch/Perf Press 10S100
Rousselle S2-30-100 Double Gear Straight Side 100 Ton Punch/Perf Press 10S100 NICE USED PRESS WITH ALLEN-BRADLEY CONTROLS. LUBE SYSTEM, AND LIGHT CURTAIN SAFETY SYSTEM. EVEN INCLUDES A MANUAL. THE RAM MEASURES 20.5" X 99" AND THE BED IS 30" X 99" WITH T-SLOTS ON 10" CENTERS. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 10S100 SERIAL# 23479 OTHER: 460 VOLT. 3-PHASE OVERALL DIMENSIONS: WIDTH: 5' LENGTH: 11' HEIGHT: 140" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& ... moreHANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $5.00 HANDLING CHARGE FOR ALL DOMESTIC UPS AND USPS PACKAGES. $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES, AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN E
FEDERAL 1973 S-55 8 INCH STROKE PUNCH PRESS EXCELLENT CONDITION
FEDERAL S-55 8IN STROKE 60 TON PUNCH PRESS 1973 YEAR CALL FOR DETAILS SEAN 818-355-2974
Punch Press Open Back Inclinable Plain Flywheel 60 ton Danly
60 ton Danly Open Back Inclinable Plain Flywheel Punch Press Specifications Rated capacity: 60 Tons, Stroke of slide: 3.5" Shut height. SDAU, over bed: 13.5" Adjustment of ram: 3" Area of bed: 32" L to R) X 21" F ro B) Depth of throat: 11" Width of opening through back: 17" Strokes per minute: 100, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
88 Ton Minster 40-5 Straight Side *See Video* 14" stroke, Punch Press SSSC
Make offer Manufacturer: Minster Model: 40-5-3853 Straight Side Single Crank Double End Drive Dual palm control When we got this machine we had the motor rewound and new bearings installed. We have never used this machine for production. Specifications: Tonnage 88 Size Of Bed& Ram 29" X 31" Distance Between Sides 29" Ram Stroke 14" Ram Adjustment 3-1/2" Shut Height 12" Table Depth 31" Weight 17.000lbs? I was told by rigging company. Please call or email me with any questions you may have. PayPal is NOT accepted. The preferred method is by check or ETF. Shipping is FOB Murfreesboro, TN 37129. I do not have equipment to move this press. I can unhook all utilities so the movers can just move it. Consolidated Mill Supplies(CMS) has been a leader in the particle size reduction and selection industry since ... more1946. Starting as a regional supplier to feed mills. Our business has grown into supplying customers in various industries in all 50 states and over ten foreign countries. CMS strives to unite our many suppliers with our customers needs in the most efficient, cost effective solution. Since 1995 we have grown by over 15% a year by offering new products and expanded services to an ever-growing customer base. Our customers include large animal feed producers, aqua feed producers, poultry feed and pet food manufacturers, ethanol and bio-diesel producers, coal and mineral mining, wood and fiberglass processors and an extensive array of rendering and recycling processors. Clint Russell Consolidated Mill Supplies LLC 841 Commercial Ct. Murfreesboro, TN 37129(615)8nine3-77one7 office(616)9zero1-9one70 cell
Buffalo Iron Worker, W-10533 Shear Punch Notcher 220/3
Buffalo 60 ton Iron Worker Serial W-10533. 220/3ph This very nice Buffalo 60 ton Iron Worker just came in from the county. It has never been in the manufacturing business sector and was only used for local government work. It is in Good condition. Below are the Specifications of the machine: SPECIFICATIONS Throat Depth 6" Punch 1" hole in 1/2" 13/8" hole in 3/8" Bar Shear 1 3/8" x 14" 1 1/4" x 10" 1" x 6" Angle Shear 90° Slug Type Sever Cut 3" x 3" x 1/2" 3" x 3" x 1/2" Miter Angle 45° Bar Shear Slug Type 3" x 3" x 1/2" 2" x 2" x 1/2" Channel Shear 4" or 6" standard Coper Notcher 90° For 3" x 3" x 1/2" angle Square Notcher 1 3/4" x 2" x 1/2" Pipe Notcher Sched 40 or 80 1/2" ... more3/4" 1" 1 1/4" 1 1/2" Brake 6" or 9" x 1/2" Strokes per minute(light material) at max capacity) 50 17 Hydraulics 1.000 psi Oil Capacity 15 quarts Motor Standard Optional 3 HP. 3 phase 3 HP. 1 phase Dimensions Width Length Height Bar shear working height Punch table top ht. Cavity table top ht. Notcher station working height 28" 34" 60" 29" 38 1/4" 37 1/2" 22" N42-14 only) Weight(net) 2.000 lbs Buyer to pick up in Norco. CA 92860 or pay for shipping thru Freightquote.com by calling 800-323-5441 x 1118 Michelle Grabber. Iron worker can be bolted to a pallet. Shipping can also be found at Uship.com. I will ship Worldwide by Freight Forwarder using a Container/Boat for transportation to your closest port. Buyer is responsible for all import duties required in his country. Check out my! Be sure to add me to your! Payment will be made by calling 928-899-8208 for payment by Credit Card or Paypal. Items will be shipped as soon as bank confirms payment. Buyer to pay all shipping/freight charges. We can load with forklift if needed. Buyer to find own shipping companies but in the past we have had good rates with
Wasino PUX 25 25T Punch Press
Wasino Pux 25 25t Punch Press Runs Excellent! Questions Call Steve@ 866-803-5202 Shipping Quotes Contact SPECIFICATIONS;
Steel Rule Cutting Die / Punch Press - Rectangles
Steel Rule Cutting Die/ Punch Press- Rectangles Description Cutting/ Punching Die Well made in sharp/ good condition This die/punch is made to punch 2 rectangular shapes measuring 4"x8" 4"x8" These dies came from a rubber company that is downsizing. Please feel free to ask any questions. Thanks for looking. for more great items! Payment We accept PAYPAL payments. Please make payments within 36 hours of purchase. Shipping We ship within 48 business hours of cleared payment. We will combine shipping whenever possible with no handling charges. Thanks for looking. Have a great day! txzj pxzj229 txzj-4 txzj1
ROUSELLE 3F 25 TON OBI PUNCH PRESS
ROUSELLE 3F 25 TON OBI PUNCH PRESS 2HP 3PH 135 STROKES PER MIN.GREAT SHAPE
Sonic Strippit 18/30 sheet metal fabricator Single Station Punch Press
Our internal inventory number on this product is To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! DESCRIPTION: You are bidding on a Strippit 18/30 Single Station Punch. We bought from company storage. They said it ran fine, just no longer had a use for it. Below are specs we got ONLINE, please verify independently: Strippit Model Sonic 18/30 Single Station Punch. 30-Ton Capacity. 19" Throat, 1/4" Maximum Material Thickness, 165 SPM, 5 13/32" Shut Height. 3 1/2" Maximum Hole in 3/32" Mild Steel, 3/4" Maximum Hole in 1/4" Mild Steel, Assorted Tooling, Remote Foot Switch, 3-Phase Motor and Controls, Approx 36"x48"x72" ... moreand 3.500 lbs*NOTE* Top Bidder to pay $100.00 Loading& HANDLING + Actual shipping costs from Zip 49534! On Payments under $250.00 we only accept Paypal or certified funds by wire transfer. For payments over $250.00 we prefer Paypal. But will accept other forms of certified funds and company checks(non certified checks held 10 business days for clearance) Good Luck& Good Bidding! Email Nu Tek Sales! OUR RETURN POLICY. We are a WHOLESALER of all types industrial equipment! Usually when you purchase items from us you will be getting anywhere from a 25% 50% discount from what fair market value would be from a used machinery dealer. We will gladly stand behind what we sell. But because of the LOW MARGINS we work with and extraordinary deals we pass on, we can not offer partial refunds on ANY SALES! We gladly offer a 30 day NO QUESTIONS ASKED return privilege. This is a 100% refund of your WINNING EBAY BID, you are responsible for ALL Packaging and Shipping costs! Good Luck. Email Nu Tek Sales! INTERNATIONAL BUYERS READ BEFORE PURCHASING! Our policies have changed: All buyers(except for those in Canada) must send via Paypal a $100.00 deposit upon making purchas
Punch Press OBI 110 ton Minster Model No. 9
110 ton Minster Model No. 9 OBI Punch Press Specifications and Equipment Tonnage Capacity: 110 Ton, Length of Stroke: 4" Adjustment of Ram: 3.5" Shut Height over Bed: 17.5" Equipped with: Power Ram Adjustment. Air Clutch, Air Counter Balance, Air Knockout Cushion, Dual Palm Buttons, Minster Safety Control, Dies, Plates, Strippits and Punches, Dies, Plates, Strippits and Punches, Counter, Leveling Pads, Machine being sold As Is. Where Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Air-Mite Device Inc. DAP 7 Air Arbor Punch Press (Stroke 2" )
Air-Mite Device Inc. DAP 7 Air Arbor Punch Press(Stroke 2" Description Air-Mite Device Inc. DAP 7 Air Arbor Punch Press(Stroke 2" We have tested it and it appears to provide a stamping force of about 1/4 ton. Manufacturer Air-Mite Device Inc. Manufacturer Part Number DAP 7 Item/Ship Weight 151 LBS Tech Condition This item has not been fully tested and is being sold as is. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably ... morenot included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 29952 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an a
Peddinghaus CNC Duplicator Punch 150TON YA18995
SquareTrade © AP6.0 Peddinghaus CNC Duplicator Punch 150TON YA18995 This machine is listed as parts only because it needs a new board. FABRILINE Division of Peddinghaus Corp. GE Mark Century 1050 Control Panel CNC 2 axis positioning system Model: YA18995 Serial: 0-111 150 TON 20" Reach Max Material Thickness: 1 1/4" Positioning Range: 20" x 40" Min Programmed increment: 001" Positioning Accuracy: +/ 010" Full stroke of press ram: 2" Part positioning rate: 500 IPM Max Hole Dia: 1.5" on 1" plate Max Hole Dia: 1.25" on 1.25" plate Hydraulic clamp mechanism 15 HP 230/460v 3Phase Estimated Weight: 15.000 lbs. AB) We strive to deliver 5-star customer service. Bid with confidence! WE SHIP UPS GROUND TO UNITED STATES& WORLDWIDE. LARGE ITEMS WILL SHIP TRUCK FREIGHT. CONTACT US FOR RATE ... moreQUOTES. YOU WILL NEED A FORKLIFT TO UNLOAD. YOU ARE WELCOME TO PICK UP AT OUR NJ FACILITY. M-F 8AM-5PM& SAT 12-NOON. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY YOUR ZIP CODE& ITEM WEIGHT. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS V
Taber 5 Ton Kenco Kompac Punch Press 5K-7-100
Taber 5 Ton Kenco Kompac Punch Press 5K-7-100 Serial 70-270 Weight: 269 lbs(ADM141 W1 Vidmar L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge ... moreto the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-318
STRIPPIT 30 TON FABRI-CENTER N/C TURRET PUNCH PRESS MOD# FC 1000 III TOOLING
SquareTrade © AP6.0 STRIPPIT 30 TON FABRI-CENTER N/C TURRET PUNCH PRESS MOD# FC 1000 III TOOLING Prev Stop Play Next You are bidding on Strippit N/C Turret Press Tooling. Tooling for a Model: FC 1000 III This is very nice tooling in great condition and it is fully guaranteed. Includes all of the tooling shown in the photos. Note: the Cabinet is not included. We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery.
NICE!! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS - #18-E STYLUS
aims NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Di Acro- Houdaille of Lake City. Minnesota. This is a 18-Station Turret Punch Press in GREAT condition. Model# 18-E Stylus Serial# 0660875150 Specifications: Number of Stations: 18. Maximum Material Capacity: 1/8" Punching Capacity: 2" in 16-gauge mild steel. Throat Depth: 19" Punching Speed: Up to 140 holes per ... moreminute. Crankshaft Speed: 245 strokes per minute. Overall Table Size: 60" x 36" Carriage Travel: 19" x 24" Work Piece Size: 19" x 24" Punch Motor: 1/2 Horsepower. 115/230 Volt, 1,725 rpm, 9/4.5 Amp, 60 Hz, Single Phase. Turret Motor: 1/4 Horsepower. 115 Volt, 1,725 rpm, 4.4 Amp, 60 Hz, Single Phase. Overall Dimensions: 62" x 66" x 68" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH P
TOLEDO 4-1/2 34.5 TON PUNCH PRESS 3" STROKE AIR CUSHION
TOLEDO 4-1/2 34.5 TON PUNCH PRESS 3" STROKE AIR CUSHION ​TOLEDO 4-1/2 34.5 TON PUNCH PRESS 3" STROKE AIR CUSHION MIN SHUT HEIGHT: 7-1/4" MAX SHUT HEIGHT: 7-1/4" SERIAL NO: 58248 TABLE: 24" x 17" DISTANCE BETWEEN COLUMNS: 12-5/8" OVERALL MEASUREMENTS: 44" x 52" x 110" PLEASE CALL FOR WEIGHT LOADING FEE: $30 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish ... moreto use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a
TORC PAC 60 TON PUNCH PRESS 13-1/4" SHUT HEIGHT 4" STROKE OF SLIDE
TORC PAC 60 TON PUNCH PRESS 13-1/4" SHUT HEIGHT 4" STROKE OF SLIDE ​TORC PAC 60 TON PUNCH PRESS 13-1/4" SHUT HEIGHT 4" STROKE OF SLIDE TABLE: 32" x 20-7/8" x 2-3/4" THICK DRILLED AND TAPPED DISTANCE BETWEEN COLUMNS: 18-7/8" SERIAL NO: 57-8774 STROKES/ MIN: 45- 90 SLIDE ADJUSTMENT: 3 OVERALL MEASUREMENTS: 65" x 51" x 111" PLEASE CALL FOR WEIGHT LOADING FEE: $40 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service ... morePolicy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers
75 Ton NIAGARA Model AF- 4 ½ O.B.I. Punch Press
75 Ton NIAGARA Model AF- 4 ½ O.B.I. Flywheel press with air clutch. Rating of press 75 Tons Safe capacity near bottom of stroke 90 tons Diameter of shaft at main and connection bearings 4 ½”6 ¾” Stroke 4” Strokes per Min 42 Ram adjustment 3 3/8” Throat depth 12 ½” Slide area 15” x17 1/8” Distance between gibs 13 ¼” Bed area 36” x 24” Rectangular opening in bed 18” x 14” Width of opening in back 20” Shut height 15 ¾” EQUIPPED WITH: Electro-pneumatic friction clutch and brake Flywheel design Bolster plate Air Counter balance of ram Dual palm controls 7 ½ H.P. 3/60/220-440 variable speed drive w/ controls Dimensions: 66”LR x 90”FB x 129”High Approx. weight: 13.000 lbs.
30 TON NISSHINBO "HIQ-1250" 37-STATION CNC TURRET PUNCH - #26838
Quote# 26838. 30 TON NISSHINBO"HIQ-1250" 37-STATION CNC TURRET PUNCH New 2000. Serial No HIQH-12016, Model HIQ-1250. EQUIPPED WITH: Nisshinbo PAL-510T 5-Axis Simultaneous CNC Control w/CRT 37-Station"Thick" Turret(Bi-Directional) w/3 Auto. Index Stations 49.2" X 196.85" Sheet Size w/Automatic Repositioning Automatic Sheet Repositioning. CATALOGUE SPECIFICATIONS: Tonnage Capacity 294.OkN 30 TON Material Thickness. Maximum.250" 6.35MM Hole Capacity. Maximum 3.5" 11 GA Hole Capacity. Maximum 88.9MM- 2MM Hole Capacity. Maximum 1.625" 250" Hole Capacity. Maximum 41.3MM- 6.35MM Workpiece Size. Without Repositioning 49.2" X 98.4" Workpiece Size. Without Repostioning 1250MM X 2500MM Workpiece Size. With Repositioning 49.2" X 196.85" Workpiece Size. With Repositioning 1250MM X 5000MM ... moreMaximum Sheet Weight w/o Outboard Tables 397LBS 180KG Hits Per Minute@ 1" Moves 260 HPM Nibbling Hits Per Minute 650 HPM Axis Speeds. Max. 60M/MIN 2400 IPM Auto-Index Speed 30 RPM(Bi-Directional) Overall Dimensions. L x W 17'4" x 14'11" Overall Height 7'5" Weight. Approximately 34,000 LBS. PRICE: F.O.B. OUR WAREHOUSE $39.500.00. All machines/equipment subject to prior sell.
ROUSELLE Model 2G 15 Ton Deep Throat Gap Frame Punch Press Machine
2G Deep Throat Gap Press Machine. 15 Tons Brand: Rousselle Model: 2G Deep Throat Gap Press Machine Description: Capacity: 15 Ton- Stroke: 2" Shutheight: 7-3/4" Adjustment: 1-1/2" Bed Area: 11" x 16" Throat Depth: 18" Flywheel Type. Speed: 160 SPM. Motor: 1 HP 115/230 Volt 1 Phase. Air-Actuated Mechanical Clutch. Electric Foot Switch. Weight: 2075 lbs.
L&J 27-TON OPEN BACK INCLINABLE MECHANICAL PUNCH PRESS
L&J 27-Ton OBI Mechanical Punch Press Description: In great working& cosmetic condition! This L&J is pure American made heavy-duty iron. Features include front dual palm. Single& continuous stroke and a 5 HP motor. We are in desparate need of space and need to clear our aisles. So this machine is being offered at a rediculously low reserve. We are selling this machine for a customer who has stored the machine is our warehouse but no longer has use for the machine thus the machine is being sold"as is, where is" and our regular return policy does not apply. We are unable to load this machine due to the weight though we have the resources to a local rigger that will load at a reasonable rate of $200. Check out our feedback& bid with confidence! L&J OBI Inclinable 27-Ton Mechanical Punch Press Manufacturer: L&J ... moreModel: 27 S/N: 35751A Year: 1977 Specifications: Tonnage 27 Stroke 2.5 Slide Adjustment 2" Shut height 8 1/4 Bed 21.5" x 13" Ram 16 x 10 Speed 120 SPM variable Motor 5HP Dimensions appx 51" x 48" x 89" Weight 4.000 lbs Equipped With: Single/ Continuous Setting Dual Palm Control Flyweel Guard Electrical Cabinet The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Any taxes shall be paid by the buyer in addition to the quoted purchase price. DELIVERY DATES: While every e
Rousselle No 2 15 Ton 2"stk OBI Punch Press Metal Stamping Die Tool Bending
Rousselle No 2 15 Ton 2"stk OBI Punch Press Metal Stamping Die Tool Bending Tested as pictured– Mechanical dog clutch functions in and out positively– Coaster brake holds Motor starter w/therm O/L included Incline adjuster handwheel is broken(see pic. Specifics- Rouselle: Chicago. IL· Model: No 2· Tons: 15· Stroke: 2” Platen Size: 14.5”W.x 11.25”D. Daylight Opening: 10” Throat: 5.75” Die Set Shank Dia: 1½” Motor: 1.5 HP. 1725 RPM, GE, Cont. Duty· Volts: 208-230/460. Amps: 5.8-5.6/2.8, 3Ph· O/A Dimensions: 24”W.x 40”D.x 68”H. Net Weight: 1080 lbs. May be inspected at our facility w/power available PLEASE NOTE WELL: If you don’t have the $$$ to pay for this item within 3 DAYS of purchase– Please DON’T press the“Buy It Now” button. Free Credit and Free“Lay-a-Way” are NOT included. Item will be relisted for ... moresale to a $ buyer if not paid for in 3 days… Free Loading For Buyer Pick Up! OR Add $49 to palletize press on approx. 48”x 48” pallet at approx. 1300 lbs. for pick-up by BUYER’S common carrier(pallet freight) from zip 44440. We do not arrange for common carrier shipping directly. I refer buyers to“Felix”ext.213) at Small Business Transport(888) 368-6022 or“Kam” ext. 727) at Freight Guru(877) 937-3734 for competitive motor freight rates. Give them our listed pallet size& weight(from our ad) your zip& our(44440) zip code and they can advise their best deal. If you have any questions or want more pictures or information please call us at(330) 652-7535
AMADA PEGA 304050 30 TON CNC TURRET PUNCH PRESS Must Sell! No Reserve!
aims AMADA PEGA 304050 30 TON CNC TURRET PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST PLEASE BE SURE AND READ ENTIRE AUCTION DESCRIPTION BEFORE BIDDING. MACHINE IS LOCATED AT A FABRICATION FACILITY IN NEWBERG. OREGON( NEAR PORTLAND) AND NOT OUR IRWINDALE, CA. WAREHOUSE. WE ARE LOOKING FOR A QUICK SALE AND REMOVAL. THE WINDOW FOR REMOVAL IS BETWEEN 19TH AND 22ND ONLY. THIS IS A NO RESERVE AUCTION BUT PLEASE BE SURE THE TERMS OF THIS AUCTION CAN BE MET BEFORE BIDDING. Machine just came from a Fabrication shop that had to close its doors. What a great oppurtunity. Yes. Amazingly, this is being offered at $1 starting bid. High bidder wins machine whether its $10 or $100,000! The facility where this is located had to be vacated for the new property owners, thus the need for a ... morequick sale and removal. Take advantage of this situation as you don't get an oppurtunity like this all the time. Machine was being used as shown but the indexing tool motor needs replacement. Was running jobs but they were not using the indexing feature for the two indexable stations. Photos were taken last week when machine was under power. Since then the control has been carefully disconnected to allow removal of other machines in the facility. Please email richard@reliabletools.com with any questions. Machine is being sold as is, where is. Payment needs to recieved after auction closes, next business day is fine and machine needs to picked up between 19th and 22nd of July. Please be prepared to help and make the necessary arrangements to remove machine. There is a local machinery mover that is familiar with the location and the machine. The machinery mover has qouted approx. $3000 to load. Buyer is responsible for loading/ rigging charge and shipping arrangements. You are welcome to use your own preferred mover. Made in Japan By Amada. Model# PEGA-304050. Serial# AK450167 Features: Amada-Fanuc-P System 6M(2) Indexable Tool Stations Auto Sheet Repositioner Pneumatic Punch
NICE!! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS
aims NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Whitney Metal Tool Co. This is an 18" Deep Throat Mechanical Punch Press in GREAT condition. Specifications: Throat Depth: 18" Throat Height: 7-1/2" Punch Diameter: 1" Die Diameter: 2-3/4" Stroke: 2" Table Size: 12" x 6" Motor: 1 Horsepower. 220/440 Volt, 1,155 rpm, 3.5/1.75, 60 Hz, Three Phase. Electrical: 220/440 Volt. Three Phase. Overall Dimensions: 45" x 26" x 68" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check ... moreout our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS NICE! WHITNEY-JENSEN 18" DEEP THROAT MECHANICAL PUNCH PRESS Reliable Tool Inc. c 2011 | Powered by
Foot Operated Whitney Metal Tool Company Punch Press
208v 3 phase Foot Operated Punch Press. AS IS. $500.00 Call 208-286-0460 and ask for Dustin
Perkins junior 3 ton punch press ,1 1/8 stroke,4 3/4 shut height,1 inch shank
Nice little punch press.You can hardly hear it runing!115 volts.Has foot switch to trip machine. 1.125 inch stroke,1 inch adj,1 inch shank,4 1/2 x 9 inch bed,4 3/4 shut height.Can skid for shipping no charge.For more info 909-641-2144-don
Diarco Rotary Punch #18 Lots of extra tooling
Nice machine. Comes with loads of extra tooling. Shapes and rounds. The dies in the picture on the left side of the pipe have matching tops and bottoms. The ones on the right side. Don't have matching sets. There might be spares for the ones in the press or for the ones on the left. The machine is missing one upper die holder. I'm 10 miles west of Milwaukee if you would like to inspect or pickup. Will ship. As is Jeff 262 227 7774
BLISS 18 TON O.B.I. PUNCH PRESS 110 VOLT 1 PH
WELCOME! ITEM LOCATION: Orem Utah. 84057 ITEM DETAILS TYPE: 18 TON O.B.I. PUNCH PRESS M AKE: BLISS MODEL: 8430 S/N: 3903 CAPACITY: 18 TON SPECS: 28" W* 30" L* 62" T CONDITION: FAIR CONDIT ION. RUNS AND OPERATES SHIPPING: PLEASE SEE THE SHIPPING CALCULATOR IN AD Please see our store for more equipment/ machinery Visit our eBay Store: A VERY SIMPLE MISSION Provide our customers the lowest cost good equipment/ machines. With the best personal service and support you can get. We stake our reputation on your satisfaction. GUARANTEE We do not list items on eBay that we would not buy for ourselves. We evaluate and complete a detailed condition report and pictures on our items to be included in our auction. We provide this service as a convenience to you. As we aren’t able to guarantee everyone’s satisfaction. We must adhere to the ... morestandard“as-is” auction format. Our feedback and reputation is our best guarantee of good value. SHIPPING Buyer is responsible for shipping. However we are glad to assist you should you need it. Packaging We do charge for packaging up items. It is money well spent to ensure that your purchased item gets to you unharmed and in good working order. Here is our charge break down. Boxing: $10.00-$35.00(depending on size of item) Pallet: $35.00-$95.00(depending on size of item) Crating: $95.00- $300.00(depending on size of item) Loading: The first 30 minutes of loading is free any additional time will be charged at $65.00 an hour PAYMENT $900(if item is $1500 or more) PayPal deposit within 24 hours of auction end or 50% of purchase if under $1500 PayPal deposit within 24 hours of auction end. Balance due by PayPal. Wire transfer, credit card by phone or cash in person within 7 days of auction end. Contact us at 1-801-787-5868 with your information for your documents and we will promptly fax or email them to you. Thank you. TAX Sales are transacted at our Home Office in Orem. Utah. Utah resident buyers pay State Sales tax. Out of Utah buyers are tax exempt. RESERVES Some auctions wi
AMADA PEGA 204040 22 TON CNC TURRET PUNCH PRESS
aims AMADA PEGA 204040 22 TON CNC TURRET PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST PLEASE BE SURE AND READ ENTIRE AUCTION DESCRIPTION BEFORE BIDDING. MACHINE IS LOCATED AT A FABRICATION FACILITY IN NEWBERG. OREGON( NEAR PORTLAND) AND NOT OUR IRWINDALE, CA. WAREHOUSE. WE ARE LOOKING FOR A QUICK SALE AND REMOVAL. PLEASE BE SURE THE TERMS OF THIS AUCTION CAN BE MET BEFORE BIDDING. Machine just came from a Fabrication shop that had to close its doors. The facility where this is located has to be vacated for the new property owners. Thus the need for a quick sale and removal. Take advantage of this situation as you don't get an oppurtunity like this all the time. Photos were taken last week when machine was under power. Machine was running jobs up until a few weeks ago. ... moreNo know issues and everything appears to be functioning as it should. Please email richard@reliabletools.com with any questions. Machine is being sold as is, where is. Payment needs to recieved after auction closes, next business day is fine and machine needs to be moved quick. Please be prepared to help and make the necessary arrangements to remove machine. There is a local machinery mover that is familiar with the location and the machine. The machinery mover has qouted approx. $3000 to load. Buyer is responsible for loading/ rigging charge and shipping arrangements. You are welcome to use your own preferred mover. Made in Japan By Amada. Model# PEGA-204040. Serial# AP440085 Features: Amada-Fanuc-P System 6M(2) Indexable Tool Stations Auto Sheet Repositioner Pneumatic Punch Die Extractor Specifications: Capacity. 22 Ton Table Size. 39" x 81" Ball-Top Table Thickest Material. 1/4" M.S. Max Sheet Weight.110 lbs. X and Y Travel. 43 1/4" X. 41" Y Number of Stations. 24 Station Turret Maximum Speed. 350 SPM Axis Speed. 2000 I.P.M. Turret Speed. 30 R.P.M. Standard Control.
Finn-Power CNC Turret Punch Press TP-2525-IF2
Recently serviced and tuned. Has 80 gallons of fresh oil and comes with a lot of extra dies. All that is missing to make this baby run is the software. Details 21 Station Turret Model# TP-2525-IF2 Punching Force 33 Ton Maximum Material Thickness 5/16" Max. Working Area 48" x 100" Max. Sheet Weight 440 Lbs. Table Travel 51.8 X 101" X-Axis Traverse Speed Max. 3150 IPM Y-Axis Traverse Speed Max. 2362 IPM Hits Per Minute On 1" Centers 300 Hits Per Minute Nibbling 600 Siemens Sinumeric 3N CNC Control Fully Programmable Depth& Stroke Length 21 Station Turret(Amada Thick) 3) Auto Index Stations(3) Multitool Stations Please call to arrange shipping(818) 768-5924
1988 NIAGARA 50-TON MECHANICAL PUNCH PRESS. NO RESERVE! USA MADE! CALIFORNIA.
Niagara 50-Ton Mechanical Punch Press. NO RESERVE Description: In great working& cosmetic condition! This Niagara is pure American made heavy-duty iron. Features include front dual palm& foot control. Single& continuous stroke and a 7.5HP motor. We are in desparate need of space and need to clear our aisles. So this machine is being offered at a rediculously low reserve. We are selling this machine for a customer who has stored the machine is our warehouse but no longer has use for the machine thus the machine is being sold"as is, where is" and our regular return policy does not apply. We are unable to load this machine due to the weight though we have the resources to a local rigger that will load at a reasonable rate of $550. Buyer responsible for all loading& transportation costs. Check out our feedback& bid ... morewith confidence! Niagara 50-Ton Mechanical Punch Press Manufacturer: Niagara Model: M-45 S/N: 53014 Year: 1988 Specifications: Tonnage 50 Stroke 3.5" Shut Height 12" Slide Adjustment 2-5/8" Bed Area 28" x 18" Slide Area 12" x 14" Throat Depth 9" Opening Thru back 14" Speed 60-180 spm Dimensions Appx 50" x 62" x 110"H Weight Appx 7.000 lbs Equipped With: Air Clutch& Brake Dual Palm Controls Continuous Setting Auto Lube System 7.5HP Motor Inching Flywheel Guard Clutch Control Full Enclosure Foot Control The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to th
BLISS 93-TON OPEN BACK INCLINABLE PUNCH PRESS. CHEAP!!!
Bliss#28 Open Back 93-Ton Inclinable Press. No Reserve! Description: In great working& cosmetic condition! This Bliss is pure American made heavy-duty iron. Features include open back inclinable. Front dual palm control, front saftey guard and a 10HP motor. We are in desparate need of space and need to clear our aisles. So this machine is being offered at a rediculously low reserve. We are selling this machine for a customer who has stored the machine is our warehouse but no longer has use for the machine thus the machine is being sold"as is, where is" and our regular return policy does not apply. We are unable to load this machine due to the weight though we have the resources to a local rigger that will load at a reasonable rate of $650. This machine is a monster. Buyer responsible for all moving costs incurred. Check out ... moreour feedback& bid with confidence! Bliss 93-Ton Open Back Inclinable Press Manufacturer: Bliss Model: 28 Year: 1950 Specifications: Bed Area 37 x 29 Ram Area 21" x 14" Shut height 14" Stroke 8" Tonnage 93-Ton Strokes per minute 35 Motor 10HP 3/60/220/440 Appx Weight 20.000 lbs Appx dimensions 95" x 70" x 135"H Equipped With: Air-Clutch Front Enclosure Open Back Inclinable Single Back Gear Front Dual Palm Controls The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contact us@714-441-1527 or Email Us GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. A
Di Acro Houdaille Turret Punch Press
This is a good working Di Acro turret punch press. Model VT-199. It has 18 punch stations, and I believe it is rated at 20 tons, but I could be wrong. It weighs around 2000 lbs, and it is currently on a very heavy duty roll stand, so that we can roll it around, if needed. The stand goes with the punch press. It can easily punch 3/8" holes in 1/8" thick steel. and is perfect for sheet metal punching. The motor is powered by 240 volt AC. This punch press also has dual air powered finger grips, to hold the metal that is being punched. We're cleaning up the shop, and since we don't use it much, we can let her go to someone who can put her to good use. There are punch dies in the machine, and plenty more in a box. Di Acro is still in business, and punches are still being made for this machine. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1402293ad38-0xfa-
STRIPPETT-HOUDAILE 1830 punch--1/4 inch mild steel
The punch is currently wired for 460. It can be wired for 230. Will work 240/480. Punches and dies can be seen in the pictures. This machine is for heavier material than I use. This machine is very heavy and top heavy. I will have to charge for materials to build a pallet if you require it. Questions-email or call 910-470-7966
Janesville Tool & Manufacturing A3151 Air Press With Punch & Die Set
Janesville Tool& Manufacturing A3151 Air Press With Punch& Die Set Adjustable stroke pnuematic press. Used a short time for prototype medical device manufacture. Setup with a die for punching.8" by 1.25" rectangular parts. Die block posts are spaced at 4" so this setup can be reused with new dies for parts up to 3" by 3" 1208lbs downforce@ 80 psi. 1510 lbs at 100 psi. Palm safety button system installed. Good cosmetic condition. Guaranteed to be working perfectly. For more info see: Shipped ground freight in a custom crate attached to a skid. Packed professionally in Instapak 2 part foam for added shipping security! NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of ... moreauction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included in the shipping price. Flat fee shipping amounts apply to lower 48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or have any questions. Please contact me BEFORE placing your bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software.
Strippit FC1000 II Turret Punch Press
1979 Strippit FC1000 II Turret Punch Press 30 Ton. 20 Stations. 3 Phase. 230 Volts. Upgraded board for CNC program operation via attached PC. Fully Operational and under power. Demonstration available. Includes: Operation and Repair Manual. PC for program loading. Buyer is responsible for all shipping costs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-140546a8217-0x104-
Minster # 5 45 Ton OBI Punch Press
Up for auction is this used Minster# 5 S/N 5-11579 45 ton OBI Punch Press. This press has a 2" stroke 125 S.P. M. Is under power, 230 volt 3 phase, and I welcome, and encourage a on site inspection by anyone who may truely be interested in bidding on this item. In my opinion this press is in very good mechanical condition, having most of the origional pneumatics, air tanks, shoots, FRLs ect. Electrically, the inching control is inoperative, and the electrical system will need be updated by the buyer, to meet any and all saftey standards. The lube system appeares to function properly; I have shown a picture of the gauge reading approx. 60 P.S.I. This press is being sold in"as is where is condition" and any rigging, shipping, ect. charges are the responceabilty of the buyer. Shipping is"not free" as it may imply on ... morethe listing. I will need proof of insurance by anyone hired by the buyer to move this press. Please contact me with any questions, or to arrange an on site inspection. Payment will be cleared in my paypal account before pickup. No returnes on this item.
Perkins 15-Ton Series-B Mechanical Power Punch Press 201-B Single Phase
SKU: 2359955 A: 0013000000CXCfg O: 0065000000O2OxA PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Perkins 15-Ton Series-B Mechanical Power Press 201-B Single Phase. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Perkins Model: 201-B Type: Power Press Serial No: 35136 Features/Specifications: Capacity: 15 tons ... moreStroke: 1-1/2" Ram Adjustment: 2" Shank: 1-1/2" Shut Height: 13" Bed Area: 16" x 8" Power: 3/4 HP- 115V- 60 Hz- 1 PH Allen-Bradley power switch Foot control Pneumatic connection Click here to learn more about this type of press from the current. Dimensions& Weight: L 32" x W 40" x H 83" Shipping Weight: 1.750 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if
Bliss CH-35 OBI Mechanical Punch Press
BlissCH-35 OBI 35 Ton Punch Press*S/N: 8-55922*Yr: 1966*5 H.P. 3 Phase motor*Bed: 17 1/2" x 26" Air Clutch*Ram Clamping*Slide Adjustment: 2 1/2" Shut Height: 9 1/4" Approx. Weight: 5400lbs. Item is used and appears to be in good condition. It will turn on. However we have not been able to get the machine to stroke, therefore we are selling this as a PARTS ONLY machine. This item/machine is for sale locally. So the auction/listing may be cancelled due to a local sale. Please call us if you have any question at 214-631-1434, arrowmachinery@sbcglobal.net Items ship from Dallas. TX. or Lubbock, TX. via UPS Ground. www.arrowmachinery.com Payment Curnterenterprises aka Lubbock Machine Tool aka Arrow Machinery Sales accepts: PayPal. Visa, Master Card, American Express, Money Orders, Cashier Checks as payment of goods purchased ... morein our store. Please send payment to 6310 Singleton Blvd. Dallas, TX. 75212) All payments must be received within 7 business days. Bidders can call 214-631-1434 or arrowmachinery@sbcglobal.net for further information. All buyers residing in Texas add 8.25% sales tax. Shipping and Handling Buyer pays shipping charges based off of UPS rates plus any crating or handling fees. Fees apply on individual basis please see item description for information about any fees) Orders being shipped to P.O. Boxes will be delivered by United States Postal Services(USPS) Note: Weight restrictions may apply in some cases. Buyers can check for shipping rates at www.usps.gov or www.UPS.com) Orders under 150 lbs. can be shipped by U.P.S. Freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Curtnerenterprises aka Lubbock Machine Tool aka Arrow Machinery Sales: offers a group of carriers that can quote you with an estimate of shipping charges for all items. Check www.conway.com. Www.roadway.com. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. Buyers are responsible for payment of all Shipping and Handling charges on all
VERSON 105 TON METAL STAMPING PUNCH PRESS
Verson 105 Ton Metal Stamping Punch Press Model#V 7-1/2 OBG Serial#22549 Punch press. Open back gap frame, 105 ton capacity, 8" stroke, 4" ram adjustment, 18" shut height, 39"x39" bolster area, air clutch, die cushion, 40 strokes per minute, push button operation, STI Mini-Flex light curtain. Previously rebuilt drive assembly. New Air Solenoid 2 years ago, good life remaining on clutch pad, two surge tanks, missing one counterbalance. Currently hooked up to electrical and air systems and is available for test operation. Located in Minneapolis, MN(55449) metro area. We have ran this punch press in normal operations for many years with excellent results. Priced to sell at $5,999 Bank Wire Transfer or Cash only. Call John 763-780-9387 Copy of Original Factory Safety and Operations Manual from Verson Allsteel Press Company ... moreis included. BUYER IS RESPONSIBLE FOR ALL RIGGING AND SHIPPING. We cannot move this punch press with any of our in house equipment. Approximate weight of machine is 17,500# SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED AND VERIFIED. Powered by The free listing tool. List your items fast and easy and manage your active items.
60 TON NIAGARA MODEL AA4-1/2 PUNCH PRESS W/ AIR CUSHION
60 TON NIAGARA MODEL AA4-1/2 PUNCH PRESS W/ AIR CUSHION Click Images to Enlarge ​60 TON NIAGARA PUNCH PRESS W/ AIR CUSHION MODEL AA4-1/2 SERIAL NO: 330520 SLIDE ADJUSTMENT: 3-3/8" 7 HP 220/ 440 VOLTS 3 PHASE 60 HZ BOLSTER PLATE MEASURES: 36" x 24-1/4" x 4" THICK DISTANCE BETWEEN COLUMNS: 20-1/4" 3" DIE MOUNT 12.5" THROAT MEASURES: 60" x 80" x 127" TALL WEIGHT: 8.000 LBS LOADING FEE: $50 COMES AS SHOWN IN PHOTOS WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight ... morecharges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgep
Good Working Alva Allen Model BHS2 2 Ton Electric Motor Punch Press
You will need to contact me call or text at 989-802-9508 to get a freight quote. I will need the whole address to get an accurate quote. It weighs approx. 175 lbs. It will ship in 2 different packages with Fedex Ground. Hi! I have for Auction here a good working Alva Allen Model BHS2 2 Ton Punch Press with an Electric Motor. I don't know a whole lot about these so if you have any questions about any measurements please don't hesitate to ask. It is in pretty good condition. The shroud cover doesn't fit on the way it is as it needs a shorter belt and the motor move in a little closer. The cord and switch may need some work for it to be totally safe but it works the way it is. See Pictures. Get yourself a great deal here. Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to ... morecontact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction
STRIPPIT SPM 750 DI-ACRO FABRI CENTER N/C TURRET PUNCH PRESS + TOOLING
STRIPPIT SPM 750 DI-ACRO FABRI CENTER N/C TURRET PUNCH PRESS + TOOLING Click Images to Enlarge ​STRIPPIT SPM 750 DI-ACRO FABRI CENTER N/C TURRET PUNCH PRESS + TOOLING HOUNDAILLE THIS PUNCH PRESS COME INCLUDES TOOLING CABINET WITH TOOLING INSIDE FANUC GN SERIES 19 STATION TABLE: 77" x 44" CAT NO: 108195-510 230/ 460 VOLTS 60 HZ 3 PHASE SERIAL NO: 082886006 MEASURES: 134" x 77" x 99" TALL PLEASE CALL FOR WEIGHT LOADING FEE: $35 COMES AS SHOWN IN PHOTO NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the ... moreinvoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo,
Mubea 55-Ton Ironworker HPSN-500 Punch Shear Notcher Coper Muhr & Bender - 3 PH
SKU: 640707 A: 0013000000DsITx O: 0065000000OTxat PA: View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Mubea 55-Ton Ironworker HPSN-500 Punch Shear Notcher Coper Muhr& Bender- 460V/3PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Mubea(Muhr& Bender) Model: HPSN-500 Type: Ironworker Serial No: 0157585414199 Origin: Made in Germany Features/Specifications: ... morePlate Shear: Flat Bars: 13-3/4" x 1/2" or 12" x 5/8" Angles 45 Deg: 4" x 4" x 3/8" Cutting Length: 13-3/4" Knife Length: 14" Section Shear: Angles 90 Deg: 4" x 4" x 1/2" Angles 45 Deg: 2-3/4" x 2-3/4" x 3/8" Bar Shear: Round: 1-1/4" Square: 1-1/8" Coper-Notcher: Plates: 3/8" Coping Width: 2" Coping Depth: 3-1/2" Punch: Pressure: 55 tons Diameter Thru Thickness: 1-1/4" thru 19/32" Length of Stroke: 1-1/4" Depth of Throat: 10" Other: No. of Strokes@ Full Stroke: 10 per min Motor: 7.5 HP- 208-220/440-480V- 3 PH 15 gallon hydraulic fluid tank Foot control Power cord Dimensions& Weight: L 51" x W 22" x H 62" Shipping Weight: 1.475 lbs Condition: Good- reported as working at time of decommission by consignor Normal wear from age& previous use in working industrial environment Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(whe
TELEDYNE TABER KENCO 5 TON PUNCH PRESS 051-070-100 SINGLE PHASE!
TELEDYNE TABER KENCO 5 TON PUNCH PRESS 051-070-100 SINGLE PHASE! Click Images to Enlarge ​TELEDYNE TABER KENCO 5 TON PUNCH PRESS SINGLE PHASE MODEL: 051-070-100 MADE IN U.S.A SERIAL NO: 75-619 250 SPM 115 VOLTS 1 PHASE 60 HZ 4.5" THROAT TABLE AREA: 10" x 7" MEASURES: 27" x 31" x 57" 1/2 HP MOTOR WEIGHT: 616 LBS COMES AS SHOWN IN PHOTOS loading fee: $20. WE DO NOT OFFER FREE SHIPPING. YOU ARE WELCOME TO PICK UP THE ITEM AT OUR LOCATION AT NO COST NO PAYPAL FOR WILL CALLED ITEMS Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please ... morecontact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and eq
W.A. WHITNEY 30-TON HEAVY DUTY PORTABLE C-FRAME PUNCH
aims W.A. WHITNEY 30-TON HEAVY DUTY PORTABLE C-FRAME PUNCH read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by W.A. Whitney. This is a used Heavy Duty Portable C-Frame Punch in good condition. Model# 730 Serial# 6987 Specifications: Capacity: 30 Tons. Throat: 3" Clearance Height of C-Frame: 2" Die Sizes Range: 11/32" to 1" Overall Dimensions: 11" x 10" x 16" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. W.A. WHITNEY 30-TON HEAVY ... moreDUTY PORTABLE C-FRAME PUNCH W.A. WHITNEY 30-TON HEAVY DUTY PORTABLE C-FRAME PUNCH W.A. WHITNEY 30-TON HEAVY DUTY PORTABLE C-FRAME PUNCH W.A. WHITNEY 30-TON HEAVY DUTY PORTABLE C-FRAME PUNCH W.A. WHITNEY 30-TON HEAVY DUTY PORTABLE C-FRAME PUNCH Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1415840409c-0xfe-
KOMATSU 80TON PUNCH PRESS YEAR 2000
KOMATSU PUNCH PRESS capacity: 80 TON. Year: 2000. Very nice working machine! THE MACHINE IS LOCATED IN MIAMI. FL WHERE WE CAN LOAD IT ON TO YOUR TRUCK AT NO EXTRA COST. IF YOU WILL LIKE TO COME INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING THE MACHINE. PLEASE INSPECT THE MACHINE BEFORE THE END OF THE AUCTION OR PLACING A BID. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE.
AMADA PEGA 344 TURRET PUNCH PRESS 30TON
AMADA PEGA 344 TURRET PUNCH Dims: 110"LX165"D X 80" Capacity: 30ton Year 1985 2Auto Index With Out Repositioning: 40"X 40" With Repositioning: 40"X80" Thickness Material: 1/4" M.S. M.S. Maximum Hole Diameter: 4-1/2" Number of Stations: 582AI Strokes Per Minute:350 Axis Speed:2000 I.P.M. Turret Rotation: 30 R. P. M. Hits Per Minute: 1" moves: 220 Nibbling Hits per Minute:350 Tape Format: E.I.A. or A.S.C.I. Programming Mode: Absolute/incremental Smallest Programmable Increment: 001" Axis And Turret Drive: DC Motor Main Motor: 5HP. 220/440/3/60V Control: Fanuc 6M CNC control with CRT THE MACHINE IS LOCATED IN MIAMI. FL WHERE WE CAN LOAD IT ON TO YOUR TRUCK AT NO EXTRA COST. IF YOU WILL LIKE TO COME INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING THE MACHINE. ... morePLEASE INSPECT THE MACHINE BEFORE THE END OF THE AUCTION OR PLACING A BID. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. Thank you. On Apr-15-13 at 09:15:30 PDT. Seller added the following information: MACHINE IS IN GOOD WORKING CONDITION AND WE CAN SEND YOU THE VIDEO OF THE MACHINE OPERATING AT YOUR REQUEST.
32 Ton Heim OBI Punch Press, 3.A.OBI.F
32 Ton Heim OBI Punch Press. 3.A.OBI.F Model: 3.A.OBI.F Area of Bed: 15" x 24" Opening in Bed: 7" x 14" Width of Opening Through Back: 16" Depth of Throat: 8 1/2" Face of Ram: 9" x 12" Voltage: 480 Phase: 3 QUESTIONS? CONTACT JAMIE RENFROW(864) 303-1512. Jamier@equipmentrecon.com, or JACK WHITMIRE(864) 706-2384, jackw@equipmentrecon.com. Normal 0 false false false EN-US X-NONE X-NONE
ROUSSELLE 5-TON OBI PUNCH PRESS - #0A
aims ROUSSELLE 5-TON OBI PUNCH PRESS- 0A read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Rouselle. This is a used Heavy Duty OBI Punch Press in GREAT condition. Model# 0A Serial# 20379 Specifications: Capacity: 5 Tons. Throat: 4" Stroke: 1-1/4" Stroke Per Minute: 200 spm. Adjustment: 1" Shut Height: 5" Bed Area: 10-3/4" x 7" Open Back: 7" Motor: 1/3 Horsepower. 150/ 208-230 Volt, 1,725 rpm, 6.6/ 2.9-3.3 Amp, 60 Hz. Electrical: 115 Volt. Single Phase. Overall Dimensions: 20" x 36" x 58" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out ... moreour other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ROUSSELLE 5-TON OBI PUNCH PRESS- 0A ROUSSELLE 5-TON OBI PUNCH PRESS- 0A ROUSSELLE 5-TON OBI PUNCH PRESS- 0A ROUSSELLE 5-TON OBI PUNCH PRESS- 0A ROUSSELLE 5-TON OBI PUNCH PRESS- 0A ROUSSELLE 5-TON OBI PUNCH PRESS- 0A Reliable Tool Inc. c 2011 | Powered by
STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS
aims STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Strippit/ Houdaille of Akron. New York. This is a used Sheet Metal Fabricator Punch Press in working condition. Model# Super 30/30 Serial# 71111966 Specifications: Capacity: 30 Tons. Throat: 30" Maximum Hole Diameter: 3-1/2" diameter in 12 gauge. Maximum Material Thickness: 1" diameter in 1/4" Stroke: 5/8" Production Rate: 165 SPM. Table Dimensions: 72" x 48" Electrical: 220 Volt. Three Phase, 60 Hz. Overall Dimensions: 96" x 76" x 68" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, ... moreplease check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS STRIPPIT SUPER 30/30 SHEET METAL FABRICATOR PUNCH PRESS Reliable Tool Inc. c 2011 | Powered by
BLISS 19 1/2 PUNCH PRESS-22 TON
Up for sale is a Bliss Punch press model 19 ½ B Press punch capacity: 22 ton SLIDE ADJ: 2 ¼ STROKE: 2 ½ SHUT HEIGHT ON BED: 7 ¾-Please feel free to ask any question-Sold as is. It is used in good working condition! May have an oil leak; but not sure if it shot some oil/ lubricant when it was moved. Thanks for watching*Free local pickup only. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-142f85b4f1e-0xf8-
lourdes Punch Press
Used Lourdes High Velocity Impact Electromagnetic Punch Press. Ideal for thin material. Lourdes Systems. High Velocity Impact Presses. Electromagnetic power offers advantages that no other press can. By producing a stroke velocity up to 750 times faster than a conventional press, the Lourdes Press provides the best edge quality for virtually any material. Longer Tool Life-Less distortion. Virtually Maintenance-Free- No clutches. Brakes or belts to adjust-only one moving part. Clean Room Certified- Electric power-no sloppy grease or oil. Compact- Up to 90 tons of punch power in less than six cu. ft. of space. Precision Performance- The Lourdes Press IS a precision die set able to run close tolerance tooling down to zero clearance. The patented Lourdes High Velocity Impact Press is powered by the versatile 2100X-A. Which is a complete system ... morecontrol. In addition to all die set and material feed functions, the Lourdes control interfaces directly with light curtains, proximity switches, material sensors, guard sensors, alarms and counters. The 2100X-A operates on 208/240 volts, single phase, 50 or 60 HZ. This system requires minimal operator training and its built-in diagnostic system allows fast resolution of problems which results in maximum up time.
USI CLEARING 45 TON PUNCH STAMPING PRESS 75 STROKES PER MINUTE 5 HP MOTOR
USI CLEARING 45 TON PUNCH STAMPING PRESS 75 STROKES PER MINUTE 5 HP MOTOR Click Images to Enlarge ​CLEARING 45 TON PUNCH STAMPING PRESS 75 STROKES PER MINUTE SERIAL NO: 53-1521 STROKE OF SLIDE: 4" SLIDE ADJUSTMENT: 2-1/2" SHUT HEIGHT: 12" PUNCH MOUNT: 2" DIAMETER THROAT: 11" DISTANCE BETWEEN COLUMNS: 15-1/4" PLATE THICKNESS: 2-1/2" TABLE: 27-1/2" x 18" 5 HP 1.740 MOTOR RPM 3 PHASE 50/ 60 HZ VOLTAGE: 208-220/ 440 14.7 AMPS MEASURES: 31" x 59" x 97" TALL PLEASE CALL FOR WEIGHT LOADING FEE: $30 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS ... moreAT NO CHARGE Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a
HAVIR MFG CO PRESS RITE NO 2 STAMPING PUNCH PRESS 20 TON CAPACITY
HAVIR MFG CO PRESS RITE NO 2 STAMPING PUNCH PRESS 20 TON CAPACITY Click Images to Enlarge ​HAVIR MFG CO NO 2 STAMPING PUNCH PRESS 20 TON CAPACITY MADE IN U.S.A PRESS NO: 2 SERIAL NO: 6512 STROKE: 2" TABLE: 18-1/2" x 11-1/2" PLATE THICKNESS: 1-1/2" PUNCH MOUNT: 2" THROAT: 6-1/4" DISTANCE BETWEEN COLUMNS: 8-3/4" 2 HP VOLTAGE: 208-220/ 440 7.1 AMPS 3 PHASE 1.160 RPM 60 HZ MEASURES: 34" x 40" x 72" TALL WEIGHT: 1.780 LBS LOADING FEE: $30 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic ... moreshipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector
AMADA PEGA 345 304050Q AUTO INDEX 58 STATION PUNCH PRESS + TOOLING & MANUALS
AMADA PEGA 345 304050Q AUTO INDEX 58 STATION PUNCH PRESS + TOOLING& MANUALS Click Images to Enlarge ​ AMADA PEGA 345 304050Q AUTO INDEX 58 STATION PUNCH PRESS + TOOLING& MANUALS ATTENTION: THIS PUNCH PRESS WILL BE AVAILABLE FOR INSPECTION UNDER POWER IN SANTA ANA. CA TO 12/18/16. AFTER THE 18th. THE PUNCH PRESS WILL BE PUT IN STORAGE IN THE CITY OF INDUSTRY. PLEASE MAKE APPOINTMENT TO VIEW THIS PUNCH PRESS IN PERSON BY CALLING 626-330-4647 THIS PUNCH PRESS INCLUDES LOTS OF TOOLING. SOME NOT PICTURED. ALL IN TOOLING STORAGE CABINETS MODEL: PEGA 345 304050Q 3 PHASE VOLTAGE: 460/ 400/ 230/ 230 HZ: 60/ 50 MOTOR HP: 7.5& 3 TOTAL MOTOR AMPS: 12.5/ 14.7/ 24.7/ 25.6 FEATURES AMADAN-04P-C CONTROL TABLE: 107" x 52" 58 STATIONS 1/2" STATIONS: 36 1-1/4" STATIONS: 14 2" STATIONS: 4 3-1/2" STATIONS: 2 4-1/2" ... moreSTATIONS: 2 MACHINE MEASURES: 107" x 166" x 86" TALL CONTROL MEASURES: 53" x 20" x 70" TALL ALSO WILL BE APPROXIMATELY 4-5 STANDARD PALLETS(40" x 40" APPROX) OF TOOLING CABINETS LOADING FEE: $250 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 15
KENCO 1/2 HP PUNCH PRESS with SAFETY COVER
KENCO 1/2 HP PUNCH PRESS with SAFETY COVER Click Images to Enlarge ​KENCO 1/2 HP PUNCH PRESS with SAFETY COVER 8.6 AMPS 115 VOLTS 1 PHASE 1.725 rpm throat: 5" DISTANCE BETWEEN COLUMNS: 5-1/4" DIE MOUNT: 1-9/16" MEASURES: 23" x 29" x 57" weight: 354 lbs LOADING FEE: $25 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges ... moreon the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used
Rousselle 3F Punch Press, 25 ton, 3HP
25 Ton Rousselle 3F Punch Press This punch press was recently removed from a working facility and was in uses up to the time we received it. This press is in excellent condition. It comes as shown in photos. With safety guard. Manufacturer: Rousselle Model No. 3F Serial No. 25261 Capacity: 25 tons Stroke: 3" Strokes per minute: 135 Weight(approx. 4.400 lbs Power: 3 HP Electrical: 208-230/460/3/60Hz. Dimensions: L x W x H) 48" x 60" x 90" PLEASE NOTE: We are offering local pickup only. Buyers are responsible for shipment of the item. We will assist with finding a freight company for shipment and will assist with loading. Seller's Disclaimer: Please Read Thoroughly Payment You will receive your invoice withing 24 hours of the end of the auction. This will include your total balance including applicable sales tax and ... morefees. If you are uncertain how much is owed. Please wait to pay until you have received your invoice. California residents pay local sales tax of 7.25% We ask that you promptly pay for your item. Payment is due within five days of the end of the auction. PayPal is our preferred method of payment& recommended for buyer protection. PayPal accounts must have a confirmed address(withing the United States) Sorry. No international Pay. Pal payments accepted. If paying with electronic check through PayPal. Your item will ship when the payment clears. Items that are eligible for return will be accepted within 14 days of the end of the auction. Partial and full refunds will be given through PayPal minus actual shipping costs. PLease refer to the individual auction for details and contact us directly if you have any questions of concerns. Shipping and Handling Items under 150lbs are shipped via FedEx or USPS. Items weighing in excess of 150lbs will be shipped as Freight(Freight Collect) The Buyer is responsible for paying the actual shipping and handling costs. Please refer to each auction for specific shipping costs. We ask that you let us know if your address is residential or busine
AMADA VELA II 355 TURRET PUNCH
AMADA VELA II 355 TURRET PUNCH MODEL 305050. S/N: VII 55379. CAPACITY: 30TON. NO. OF TURRET STATIONS: 56. POWER REQUIRED: 20KVA. WEIGHT: 35.000 LBS. DATE MANUFACTURED:1982. We come across various equipments and for this machine since is a little complicated to operate we dont have a technician that can run it. We put power to the control of the machine and lights up but we didn't ran the machine since knowledge is needed for that. Machine came from a working facility that went under. But we are not sure about the condition of the machine. THE MACHINE IS LOCATED IN MIAMI. FL WHERE WE CAN LOAD IT ON TO YOUR TRUCK AT NO EXTRA COST. IF YOU WILL LIKE TO COME INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING THE MACHINE. PLEASE INSPECT THE MACHINE BEFORE THE END OF THE AUCTION OR PLACING A BID. ALL SALES ARE FINAL ... moreAND THE ITEM IS SOLD AS IS WHERE IT IS. NO WARRANTIES OF ANY KIND SINCE THE ITEM IS USED AND NOT NEW. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. PAYMENT MUST BE RECEIVED WITH IN 48hRS FROM THE END OF THE AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. GOOD LUCK AND HAPPY BIDS. THANK YOU!
Nisshinbo CNC Turret Punch, Model No. HTP1000 - #945084
Please Refer To Machine# 945084 Nisshinbo HTP1000 P9295 Punches- Turret N/C& CNC Tonnage 22 Ton. Manufacturer Nisshinbo CNC Turret Punch. Model No. MAP1000. Serial No. 94043. Year Mfg. 1994. Control Palvision. Sheet Size 39" x 49" Hit Rate 180 HPM. Max Material Thickness.234" Type/Tooling Thick Turret. Turret Configuration& No. Stations 22 Station w/ 2) Auto Index. Features/Accessories Hydraulic Power Supply, Condition Very Good. Comments FOB Point Elk River MN. Price $34.500. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1432252346a-0xf5-
Nisshinbo CNC Turret Punch, Model No. HTP1000 - #945083
Please Refer To Machine# 945083 Nisshinbo HTP1000 P9295 Punches- Turret N/C& CNC Tonnage 22 Ton. Manufacturer Nisshinbo CNC Turret Punch. Model No. HTP1000. Serial No. 95037. Year Mfg. 1996. Control PAL-500T. Sheet Size 39" x 49" Hit Rate 250 HPM. Max Material Thickness.234" Type/Tooling Thick Turret. Turret Configuration& No. Stations 22 Station w/ 2) Auto Index. Features/Accessories Hydraulic Power Supply. 450 SPM Nibbling. Condition Very Good. FOB Point Elk River MN. Price $39.500.
Nisshinbo CNC Turret Punch, Model No. HTP1000 - #945082
Please Refer To Machine# 945082 Nisshinbo HTP1000 P9295 Punches- Turret N/C& CNC Tonnage 22 Ton. Manufacturer Nisshinbo CNC Turret Punch. Model No. HTP1000. Serial No. 98047. Year Mfg. 1999. Control PAL-510T. Sheet Size 39" x 49" Hit Rate 250 HPM. Max Material Thickness.234" Type/Tooling Thick Turret. Turret Configuration& No. Stations 22 Station w/ 2) Auto Index. Features/Accessories Hydraulic Power Supply. 800 SPM Nibbling. Condition Very Good. Comments FOB Point Elk River MN. Price $49.500.
AMADA PEGA 345 TURRET PUNCH PRESS 30TON
AMADA PEGA 345 TURRET PUNCH Capacity:MAX 30TON Year: 1987 Sheet Size: 40"X50" Londer Using Auto Repo. Thickest Material: 1/4" M.S. Max. Hole Dia; 4 1/2" Number of Stations: 58(with 2 auto idex statations) Strokes per Minute: 350 Axis Speed: 2000 I.P.M. Hits per Minute: 1" Moves:220 Turret Rotation: 30 R.P.M. Nibbling Hits Per Minute:350 Standard Control: Fanuc 6M Main Motor: 5HP 220/3/60 Volts This unit seems to be in good working conditions. Once given power and selected a program from the memory of the machine the machine starts to move and running the program. We haven't used the machine for production or any type of work. Machine came out from a company that went under business. machine is sold"AS-IS" You are more than welcome to come and inspect the unit at our Miami warehouse location. IMPORTANT ... moreNOTICE: MAKE AN INSPECTION ON THE MACHINE BEFORE BIDDING OR IF YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND. THIS AMADA PEGA 345 IS USED AND HAS BEEN LISTED AT A GREAT PRICE! Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THANK YOU,
Mubea 82 Ton Single End Punch with Tooling
Machine Sold with a 30 Day MDNA Money Back Return Guarantee. Seller will load on Buyer's Truck at No Charge. Payment Due 10 Days after Auction Close. Machinery Dealers National Association Member MUBEA KL750 82 TON SINGLE STATION PUNCH Model KL750. S/N 0505981727324, New Stock# K13718 EQUIPPED WITH: Large quantity of Punches. Large and Small Punch Holders. CATALOGUE SPECIFICATIONS: Tonnage Capacity. Bottom Stroke. 82 Tons Power Stroke Length. 1-1/8" Maximum Strokes per Minute. 45 Throat Depth. 15-3/4" Thickness Capacity. Maximum. 13/16" Hole Capacity Thru 13/16" Material. 1-1/4" Hole Capacity Thru 1/2" Material. 2" Drive Motor. 3 HP Electrical System. 3/60 Overall Dimensions. L x W. 50" x 31" Overall Height. 74" Weight. Approximately. 3600 Lbs. NOTE: Machine is in Very Good Condition. ... moreFrom the Re-work Department of a Large Sheet Metal Fabricators Shop. 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 Summary of Selling Policies Payment We accept business checks. Personal checks, money orders, PayPal, American Express, Visa and MasterCard credit cards, bank wire transfers, ACH, and, of course, cash for items picked up at our facility. Sales Tax Machinery. Tooling and Accessories used in manufacturing are usually exempt from sales tax in our state(Ohio) A sales tax exemption certificate will be required if you are a Ohio company. Equipment purchased for personal use is subject to sales tax if you are a Ohio resident. Shipping We ship anywhere in the world. Small items(under 150 Lbs) can be shipped UPS. Larger items. Sold in North America, are usually shipped via flat bed truck- loading at our warehouse is always free. If an item mus
Amada PUNCH LOADER MP1212NF
PUNCH PRESS LOADER Make: Amada Model# MP1212NF Serial# A1212011 Manufacture Date: 8/93 Weight: 6614 lbs. Sheet Size: 50” x 50” Buyer will need to arrange for pick-up and loading of the machine.
45 Ton Minster Model #5 OBI Punch Press, S/N 5F-14903
5377- Minster OBI Punch Press Manufacturer: Minster Model: 5 S/N: 5F- 14903 Year: Specifications: Tonnage 45 Ram Stroke 3" Ram Adjustment 2 3/4" Shut Height 10 3/4" Bed Size(L-R. F-B) 28" x 18" Ram Size(L-R. F-B) 24" x 14" Throat Depth 9 1/2" Opening Thru Back 13 1/4" Strokes Per Minute(Variable) 90- 180 Dimensions(L x W x H) 80" x 52" x 110" Weight 8.000 Lbs. Equipped With: Air Clutch& Brake STI Light Curtains Rockford Brake Monitor Dual Palm Control One Shot Lube System Incline Screw Adjustment Horsepower: 5 Location: Huntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. No warranties expressed or implied. Please call 323-587-1887 for an inspection appointment ... moreor questions. Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes
60 Ton Rousselle OBI Punch Press Model: 6A S/N: 25901
800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 4822- Rousselle OBI Punch Press Manufacturer: Rousselle Model: 6A S/N: 25901 Year: Specifications: Tonnage 60 Ram Stroke 4" Ram Adjustment 3 1/2" Shut Height 11 1/2" Bed Size(L-R. F-B) 30" x 18" Ram Size(L-R.F-B) 16" x 10" Opening Through Back 16" Throat Depth 10" Strokes Per Minute(Variable) 110 Dimensions(L x W x H) 65" x 56" x 102" Weight 6.500 LBS Equipped With: Air Clutch& Brake STI Light Curtians Dual Palm Control One Shot Lube Horsepower 3 Location: Huntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial ... moreAssets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not incl
40 Ton HTC Hydraulic Punch Press Model: 4036PP S/N: 479T1649
4679- HTC Hydraulic Punch Press Manufacturer: HTC Model: 4036PP S/N: 479T1649 Year: Specifications: Tonnage 40 Ram Stroke 10" Max Open Height 11 1/2" Bed Size 216" x 19" Ram Size 8" x 8" Throat Depth 36" Dimensions 96" x 36" x 87" Weight 8.500 LBS Equipped With: Electric Food Pedal Horsepower: 10 Location: Huntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. No warranties expressed or implied. Please call 323-587-1887 for an inspection appointment or questions. Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and ... moretooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all foreign duties and taxes are the responsibility of Buyer. Unless Buyer furnishes IA MACHI
*15 TON* ROUSSELL MODEL 2 PUNCH PRESS 2" STROKE 170 STROKES PER MINUTE
15 TON* ROUSSELL MODEL 2 PUNCH PRESS 2" STROKE 170 STROKES PER MINUTE Click Images to Enlarge ​*15 TON* ROUSSELL MODEL 2 PUNCH PRESS 2" STROKE 170 STROKES PER MINUTE MADE IN CHICAGO. ILL U.S.A ADJUSTMENT: 1-1/2" SERIAL NO: 17087 SHUT HEIGHT: 7-3/4" TABLE: 16" x 11" THROAT: 7" DISTANCE BETWEEN COLUMNS: 8-1/2" 3 HP 1.725 MOTOR RPM VOLTAGE: 208- 230/ 460 4.7 AMPS 3 PHASE MEASURES: 37" x 45" x 68" TALL WEIGHT: 1.276 LBS LOADING FEE: $30 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: ... morePayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry
KENCO PUNCH PRESS 5 TON.......... ( 5K-9-200 )..............
PLEASE FEEL FREE TO ASK ANY QUESTIONS"BEFORE" BIDDING. THIS IS A USED. WORKING PRESS THAT IS BEING SOLD AS IS. LOCAL PICK UP IS PREFERRED. THIS PRESS IS IN WORKING CONDITION. IT LOOKS TO BE IN PRETTY SOLID CONDITION, IT IS A 115 VOLT. THE RAM HAS A CLAMPING SET UP TO ACCEPT A 1 1/2" DIAMETER BOSS OR TWO 5/16 BOLTS ON 4 3/4" CENTER LINE. THE PLASTIC COVER IS IN GOOD CONDITION BUT IT IS CRACKED AT ALL THE SCREW HOLES THAT FASTEN IT TO THE PRESS BUT IT DOES STAY ON. THE DOOR CATCH IS ALSO CRACKED. YOU WILL NEED A TRIP SWITCH TO ACTIVATE THE CYCLE ON THE PRESS. SUCH AS A FOOT OPERATED ONE. THIS PRESS WAS HEAVILY OILED AS THE KNUCKLED IS BATHED IN OIL. THE BED SIZE IS 6 3/8" x 12 1/4" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14350e0715d-0xf3-
Komatsu OBS 110 Punch Press
Air Clutch and Brake Air Counterbalance Hydraulic Overload Protection T-Slotted Bolster Plate and Ram Automatic Lubrication System Power Ram Adjustment with Indicator Remote Dual Palm Button Operator Control Stand Specifications: Built: 1999 Speed; 32-65 SPM Slide Stroke: 5.91" Die Height: 15" SDAU Slide Adjust: 3.94" Slide Dimensions: 23" x 21" Bolster Dimensions: 43" x 27" x 6" Included: Wintriss SmartPAC with DiPro. ProCam, AutoSet 1500, Shadow IV Safety Curtains Coe Servo-feed with SmartPAC interface Asking Price: $70.000 obo Only Approved Payment Terms: cashier's check at pickup. 10% deposit required to hold until pickup. Please call Jim at: 262-617-2641. Or email: awardmfg@sbcglobal.net Sold As Is. Where Is F.O.B. Muskego. WI Buyer is responsible for all sales taxes
Bruderer BSTA-30 3 Post 30 Ton High Speed Punch Press 2 Available!!!
This is a Bruderer 30 Ton 3 Post High Speed Punch Press BSTA-30. Material feed and control panel not available. Fly wheel. Crankshaft, bolster plate, and frame all in good condition. Local Pick-up Only. Buyer responsible for pick up and shipping.
Punch Press 10 Ton Rousselle Model 1A Service Machine Co
Tested working. Clutch needs to be adjusted. No cracks in housing or flywheel. Buyer arranges shipping. Forklift available. Will strap. Palletize and load for $50 Posted with 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143bbc6f411-0xef-
Bliss 110 Ton OBI Punch Press - ISB Safety Light Curtain System
Bliss 110 Ton OBI Punch Press Model C-110. S# H-64855, Mfg. date Dec. 1972, 110 Ton capacity, Single geared drive type, Air clutch brake system, Stroke of slide 6" 35/70 Strokes per minute, 17" Shut height on bed, Slide area 28"W x 21"FB, Bed area 42"W x 27"FB T-slotted, 4" Slide adjustment(by pneumatic motor) ISB Safety light curtain system, 20hp 230v 3ph 60cyc, Overall Dim. 8'W x 8' 10"FB x 12' 9"H, Est. Wt. 31,000 lbs. Cleaned& painted Video- http:youtu.be/17nwpBz-wY4 Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on ... moreall of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
Bliss CH-35 Straight Mechanical Punch Press
BlissCH-35 Straight 35 Ton Punch Press*S/N: 8-55922*Yr: 1966*5 H.P. 3 Phase motor*Bed: 17 1/2" x 26" Air Clutch*Slide Adjustment: 2 1/2" Shut Height: 9 1/4" Approx. Weight: 5400lbs. Item is used and appears to be in good condition. It will turn on. However we have not been able to get the machine to stroke, therefore we are selling this as a PARTS ONLY machine. This item/machine is for sale locally. So the auction/listing may be cancelled due to a local sale. Please call us if you have any question at 214-631-1434, arrowmachinery@sbcglobal.net Items ship from Dallas. TX. or Lubbock, TX. via UPS Ground. www.arrowmachinery.com Payment Curnterenterprises aka Lubbock Machine Tool aka Arrow Machinery Sales accepts: PayPal. Visa, Master Card, American Express, Money Orders, Cashier Checks as payment of goods purchased in our ... morestore. Please send payment to 6310 Singleton Blvd. Dallas, TX. 75212) All payments must be received within 7 business days. Bidders can call 214-631-1434 or arrowmachinery@sbcglobal.net for further information. All buyers residing in Texas add 8.25% sales tax. Shipping and Handling Buyer pays shipping charges based off of UPS rates plus any crating or handling fees. Fees apply on individual basis please see item description for information about any fees) Orders being shipped to P.O. Boxes will be delivered by United States Postal Services(USPS) Note: Weight restrictions may apply in some cases. Buyers can check for shipping rates at www.usps.gov or www.UPS.com) Orders under 150 lbs. can be shipped by U.P.S. Freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Curtnerenterprises aka Lubbock Machine Tool aka Arrow Machinery Sales: offers a group of carriers that can quote you with an estimate of shipping charges for all items. Check www.conway.com. Www.roadway.com. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. Buyers are responsible for payment of all Shipping and Handling charges on all items. T
AMADA SP30 PUNCH
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE AMADA SP30 PUNCH WITH AMADAN SS SYSTEM II 230 VOLT. 3 PHASE, MFG YEAR OCTOBER OF 1984, MANUAL PRICE INCLUDES 2 LISTA CABINETS FULL OF PUNCHES AND DIES S/N: 304987 VERY NICE! Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE FOR MORE INFORMATION PLEASE CALL ED SCHLICK AT: 510 506-1752 M-th cell. Or 510 506-1752 M-Th office 530 336-6 60 3 Fri and Sat WEBSITE LOCATED AT: PACIFICMACHINERYEXCHANGE.COM WAREHOUSE LOCATED AT 3402 ENTERPRISE AVE. HAYWARD. CALIFORNIA 94545* TERMS AND CONDITIONS* SALES Your bid is a contract. If ... moreyou are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. For industrial machinery. Please do NOT pay until you are invoiced! PAYMENT TERMS Pacific Machinery Exchange accepts PayPal. Cash, cashier’s checks, wire transfer, and major company checks. Money Orders. Cashiers checks of more than $1,000.00 U.S. Dollars must be sent via FedEx Priority Overnight, UPS Next Day Air or UPS Overnight Certified Mail. Money Orders and Cashiers Checks are to be made out and sent to: PACIFIC MACHINERY EXCHANGE 3402 ENTERPRISE AVE HAYWARD. CA 94545 CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS- unless we receive a valid resale card. EBAY TERMS If a customer cannot or does not pay for an eBay purchase in the specified amount of time. Pacific Machinery Exchange will file a non-paying bidder alert with eBay. We will hold the non-paying bidder responsible for the eBay fee
AMADA PEGA KING 3040 TURRET PUNCH PRESS 30 TON
For sale is our Amada PEGA King thick turret punch in good condition. Punch is currently under power and being used daily. Comes with tooling. Can assist with shipping. And rigging/loading at our end. Comes with large assortment of punches, manuals, and spare parts. AMADA PEGA-3040.50 30 TON. 44 STATION S/N AK450080 BUILT 1986 FANUC 6M
1975 BLISS C45 BACK GEARED TYPE OBI PUNCH PRESS, 4" STROKE, VARIABLE SPEED
Now available for inspection and purchase at our JV Partners warehouse in Cincinnati. Ohio is this excellent operating Bliss C45 Back Geared Type OBI Punch Press, S/N 65010, Manufactured New in 1975. SPECIFICATIONS: CAPACITY 45 TONS BED AREA 29 1/2" X 18" RAM AREA 15 1/2" X 10 1/2" 12.25" SHUT HEIGHT 3" ADJUSTMENT 4" STROKE 30 SPM to 60 SPM VARIABLE AIR CLUTCH AND BRAKE AIR COUNTERBALANCES(2) VARIABLE SPEED MOTOR AND CONTROLS MANUAL ADJUSTMENT SCREW FOR SETTING INCLINE You can see this very nice machine tool under power at our JV Partners warehouse in Cincinnati. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Bliss Model C45 OBI w/ Variable Speed Motor. Built with quality in the USA. Overall. A"Great Operating. Good Looking" Punch Press that is ready to go to work. ... moreThe appearance speaks for itself(see photo's) If you need a good 45 Ton Flywheel Type OBI Punch Press. Don't pass up this opportunity. Y ou will have no regrets if you buy this machine. We believe the new owner of this Bliss C45 OBI will be very happy with it. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be. Send it back to us and we’ll refund what you paid us. Every item we sell. Unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse(515 Kercher St. Miamisburg, OH 45342) We request that the successful buyer contact us within 72 hours
AMADA TURRET PUNCH PRESS VIPROS KING 358-4 AUTO INDEX W/CHILLER AND HYD. UNIT
AMADA TURRET PUNCH PRESS VIPROS KING 358 4 AUTO INDEX W/CHILLER AND HYD. UNIT IN VERY GOOD WORKING CONDITIONS MACHINE IS LOCATED IN BROWNSVILLE TEXAS This unit seems to be in good working conditions. Once given power and selected a program from the memory of the machine the machine starts to move and running the program. We haven't used the machine for production or any type of work. Machine came out from a company that went under business. machine is sold"AS-IS" You are more than welcome to come and inspect the unit at our Miami warehouse location. IMPORTANT NOTICE: MAKE AN INSPECTION ON THE MACHINE BEFORE BIDDING OR IF YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND. THIS AMADA TURRET IS USED AND HAS BEEN LISTED AT A GREAT PRICE! Note: PAYMENT MUST BE MADE WITHNG ... more48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THANK YOU,
Rotex 18A-SP 18 Station Manual Turret Punch Press 8 Ton Capcity 18" Throat Depth
ROTEX MODEL 18A-SP 18 STATION 18” THROAT TURRET PUNCH PRESS Description: Up for sale is a Rotex Model 18A-SP Turret Punch Press. This turret punch press is in good working and operating condition. It features an 18” throat. 18 stations, an 8 ton capacity, and a max punching diameter of 2” It comes with the stand as shown, but can be removed and shipped alone for cheaper shipping. This is a manual machine and requires no power to operate. SPECIFICATIONS MANUFACTURER ROTEX MODEL 18A-SP SERIAL 15041 THROAT DEPTH 18” STATIONS 18 CAPACITY 8 TON MAX DIAMETER 2” FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. ... moreIf you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder alert with eBay. Gary S. Aragon LLC will hold the non-paying bidder responsible for the eBay fees and commissions occurred by us. SHIPPING Buyer is responsible for all shipping
200 Ton Niagara Punch Press
Press is currently under power and operational. Posted with
Perkins Machine Co. 200-B Stamping OBI Press 9-Ton Electric/Mechanical Punch
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2319645 A: 0013000000CXCfg O: 0065000000QKJua PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Perkins Machine Co. 200-B Stamping OBI Press 9-Ton Electric/Mechanical Punch. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Perkins Machine Co. Model: 200-B Type: ... moreOBI Press Serial No: Unknown Features/Specifications: Capacity: 9-tons Power: Electric/Mechanical(flywheel driven) Baldor Motor: 1 HP- 115/208-230V- 16/8.4-8.0A 1140 RPM- 60 Hz- 1 PH Table Size: 13" x 8" Hole Thru Table: 5" diameter Adjustable incline Allen-Bradley power switch Pneumatic foot control Acrylic shield Dimensions& Weight: Dimensions: L 32" x W 36" x H 78" Shipping Weight: 1.175 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarant
Roussell 15 Ton OBI Punch Press
Roussell 15 ton OBI Punch Press. Comes with air actuated clutch as well as link electric control. This machine was being used and taken offline due to lack of work and is in working order. Machine is guaranteed as stated in description. Buyer must sign release of liability statement. We will load on your truck free of charge. Posted with
USED STRIPPIT CNC SINGLE END PUNCH MODEL 3030 AG LOTS OF TOOLING
USED STRIPPIT CNC SINGLE END PUNCH MODEL: SUPER 30/30 AG ♦ YEAR: 1987 Specifications: Max. punch tonnage: 30 Ton Max. sheet thickness: ¼” Max. workpiece weight: 30” x 30” Throat depth: 30” Max. punch diameter: 3.5” Max. strokes per minute: 80 Nibbling rate: 165 Working range w/o repositioning: 30” x 30” Number of tool stations: 1 Positioning speed X& Y simultaneous: 590 IPM Horsepower: 1 HP Table type: Aluminum Control: Earlix 2KH-700 Voltage: 440 Dimensions: 104” x 72” x 72” Weight: 7.300 Lbs. Features: ♦ Earlix 2KH-700 control with 128K storage. Manual data input, calculation mode, programmable feed rate, decimal point programming, absolute/incremental programming, automatic parts counter ♦ Portable foot pedal ♦ Large assortment of tooling ♦ Manual/CNC mode We will ship this item and cost will vary by buyer location. If you need ... morea shipping rate just let us know. Please contact us. 800 899 8182 ext. 208 PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers list for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, an