|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Independence, United States Serial# F-3/60907. 8" 3-jaw chuck, Taper Attachment, Tailstock, Aloris Style Tool Post, 2-speed main motor, 3 H.P. or 1.5 HP, 2355 Max Spindle RPM, ... moreis in good running condition, sold as is where is. No charge for loading onto your open top truck or trailer.
Buy It Now
$18.00 Shipping Condition: Used Location: Bristol, United States Clausing Colchester 15 inch lathe cross slide. Apron, cross screw nut for a 15 Clausing colchester. It is a little dirty needs some cleaning. The lathe ... morecame in and was a bit worn and fell over backwards. Have a bunch of parts in the main headstock and other gearboxes. Thank you for your Business! Shipping will be 80.00! God Bless!
Buy It Now
$900.00 Shipping Condition: Used Location: Bristol, United States BEAUTIFUL RUNNING CONDITION. CLAUSING-COLCHESTER ENGINE LATHE 15" X 48" THIS IS THE LATHE THAT WAS FLIPPED OVER ONTO THE FRONT OF IT AGAINST ... moreA PLASTER WALL THEN ONTO THE FLOOR. RESULTS THE CROSS FEED SCREW BENT AND THE SCREW PINION WAS SNAPPED ALONG WITH 3 HANDLES THAT I HAVE FIXED. I CALLED CLAUSING TO SEE IF I COULD BUY A NEW SCREW AND SCREW PINION AND I WAS GIVEN A BALL PARK PRICE OF $3000.00(OUCH) I HAVE REPLACED THE SCREW WITH A GOOD USED ONE I GOT FROM A CLAUSING DEALER HERE IN MY AREA. I ALSO HAD A LOCAL MACHINE SHOP MAKE ME A NEW PINION. THE LATHE IS READY AGAIN. THIS LATHE COMES WITH THE FOLLOWING TOOLING. 10" 6 JAW CHUCK W/ BOTH SETS OF JAWS-12" 4 JAW CHUCK-14" FACE PLATE-STEADY REST W/ 6" HOLE-DORIAN-USA QUICK CHANGE TOOL POST W/ 3 TURNING HOLDERS-1/2" JACOBS BALL BEARING DRILL CHUCK-4 MT SKODA LIVE CENTER-SPINDLE WRENCH-2 CHIP GUARDS-SPARE PARTS MANUAL. THIS LATHE HAS A L-1 SPINDLE TAPER. 2" SPINDLE HOLE. 30-1200 SPINDLE RPM. 2 1/2-5 HP 220 3 PH MOTOR(2 SPEED) FULL LENGTH CHIP GUARD THAT WILL BE PUT ON THIS WEEKEND. THE LATHE RUNS JUST FINE IN ALL THE SPINDLE SPEEDS AND FEEDS. SERIAL# 4-47830. MODEL 6500. THE OTHER THING IS THAT THE COMPANY I BOUGHT IT FROM ONLY TURNED PLASTIC WITH IT NEVER ANY STEEL OR ALUMINUM. EMAIL WITH QUESTIONS. BUYER PAYS SHIPPING. SKIDDING AND CRATING EXTRA. THANKS KENNY. RUMFORD SUPPLY& MACHINERY COMPANY INC. 263 PINE STREET. SEEKONK. MA. 02771. TEL# 1-508-639-5199. SERVING THE MACHINE TOOL INDUSTRY FOR 55 YEARS.
Buy It Now
Condition: Used Location: Miamisburg, United States The Clausing Colchester Engine Lathe will weigh approx. 3,300# and occupy 100"’ of bed space. Further, inform them it needs to be tarped. We believe the ... morenew owner of this Clausing Colchester Geared Head Engine Lathe will be very happy with it.
Buy It Now
$4.89 Shipping Condition: New Location: Cross Plains, United States Clausing Colchester Round Head 6525 13x36 lathe and maybe others. Fits Clausing Colchester Round Head 6525 13x36 lathes. This model is designed and FITS ... morethe Clausing Colchester Round Head Model 6525 13x36 lathes and MAYBE others.
Buy It Now
Condition: Used Location: Holland, United States 2 AXIS ACU RITE DIGITAL READOUT YES. FEED ENGLISH (15). 0015 to. 100 IPR. STEADY REST ROLLER TYPE YES. SPINDLE SPEEDS (16) 25 TO 1500 RPM. DISTANCE BETWEEN ... moreCENTERS 50". SWING OVER WAYS 15-1/4". THREADS ENGLISH (45) 2 TO 72 TPI.
Buy It Now
$5.40 Shipping Condition: New Location: Delaware, United States These work super well. I designed them to be very durable and precise. This was designed to fit Clausing Colchester C15 15” lathes! I have never gotten ... morea DRO for my lathes and it’s been a pain trying to mount an indicator to the bed.
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States These are 3D printed in grey or black color. Replaces OEM wipers on Colchester. We can make custom wipers for just about any lathe in a variety of materials ... moreincluding polyurethane rubber, plastic and felt or even a combination.let us know your needs.
Buy It Now
Condition: Used Location: Rocky Hill, United States FOR MORE INFORMATION. PLEASE CONTACT KENNY BERGER- HASCO MACHINERY 732-446-9531(BEST WAY TO REACH) HASCOMCHY@AOL.COM Clausing Colchester 15" x 50" ... moreEngine Lathe Equipped with. 71/2 H.P. Motor. 3-Jaw Chuck. Thread dial. Inch/metric threading. 2000 RPM. Hard ways. Appx wt 3200lbs. Model 15" $7.950.00.
Buy It Now
$5.35 Shipping Condition: New Location: New Hampton, United States These are 3D printed in grey or black color. Replaces OEM wipers on Colchester 17" &21" lathes (Example: Model 8053). We can make custom wipers for just ... moreabout any lathe in a variety of materials including polyurethane rubber, plastic and felt or even a combination.
Buy It Now
Condition: Used Location: Lenapah, United States (435) Clausing 15” x 50” Lathe Test Run - YouTube. All products are as is.
Buy It Now
$3.75 Shipping Condition: New Location: New Hampton, United States Replaces OEM wipers on Colchester Triumph Mk1 & 15" lathes. These are 3D printed in grey or black color. We can make custom wipers for just about any ... morelathe in a variety of materials including polyurethane rubber, plastic and felt or even a combination.
Buy It Now
Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
$6.80 Shipping Condition: New Location: Ionia, United States These are 3D printed in grey or black color. Replaces OEM wipers on Colchester Triumph 2000 lathes. We can make custom wipers for just about any lathe ... morein a variety of materials including polyurethane rubber, plastic and felt or even a combination.let us know your needs.
Buy It Now
$18.40 Shipping Condition: Used Location: Bennington, United States Clausing Colchester 15 inch lathe Compound rest for a 15 inch Clausing colchester. It is a little dirty needs some cleaning. The lathe came in and was ... morea bit worn and fell over backwards. Have a bunch of parts in the main headstock and other gearboxes. Thank you for your Business! Shipping will be 18.00! God Bless!
Buy It Now
$3.75 Shipping Condition: New Location: New Hampton, United States These are 3D printed in grey color. Replaces OEM wipers on Colchester Harrison 10AA Chipmaster, Colt and Bantam MK1 & MK2 and Bantam 2000. 12" x 24" Dominion. ... moreWe can make custom wipers for just about any lathe in a variety of materials including polyurethane rubber, plastic and felt or even a combination.
Buy It Now
Condition: Used Location: Lenapah, United States
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States These are 3D printed in grey or black color. We can make custom wipers for just about any lathe in a variety of materials including polyurethane rubber, ... moreplastic and felt or even a combination.let us know your needs.
Buy It Now
$18.40 Shipping Condition: Used Location: Bennington, United States 15” clausing colchester lathe handle set (speed?). Pics 1 and 2 are not of these handles or the lathe they came from,just showing you which handles they ... moreare and positioning Not perfect but decent
Buy It Now
$18.40 Shipping Condition: Used Location: Bennington, United States 15” clausing colchester lathe fiber gears. Pics 1 and 2 are not of these gears or the lathe they came from,just to show where they are positioned Good ... morecondition,bearings seem good
Buy It Now
$15.00 Shipping Condition: New – Open box Location: Berkley, United States CLAUSING COLCHESTER.
Buy It Now
Condition: Used Location: Lenapah, United States 15" X 30" CLAUSING COLCHESTER ENGINE LATHE 2" HOLE. (457) Clausing Colchester 15” x 30” Test Run (Machine 1) - YouTube. All 4 Drive belts need replaced ... morethat is the noise you hear in the video. All products are as is.
Buy It Now
$14.95 Shipping Condition: New Location: SHEFFIELD, United Kingdom Other machine tool manuals and catalogues available.
Buy It Now
$94.94 Shipping Condition: Used Location: Stamford, United States None of marks can catch my nail on them an seem better in person than in the pics. I see a spot chipped and broken off where the gib screw is, doesn't ... moreseem to matter but I see it and so will you. It kind of dirty, I wiped it but it needs more cleaning.
Buy It Now
$14.50 Shipping Condition: New Location: Ionia, United States Replaces Colchester part number: 72925-0. This is the imperial version. If you need a custom made thread dial for your lathe, let us know as we can produce ... morewhat you need. We can also print parts for any thread dial you need repaired (gears, housings, dials, etc).
Buy It Now
Condition: Used Location: United States Well, if you have a Clausing 15 with a broken leg or end bracket we have a nice set here. This had a worn gearbox and was taken for a parts machine. We ... moredo have other parts for this and other machines.
Buy It Now
$85.00 Shipping Condition: Used Location: Oregon, United States This is a Clausing Colchester 17" Taistock. It is used but is in working condition. Shiping: $115.00. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-14041e969f5-0x106-
Buy It Now
$40.00 Shipping Condition: Used Location: Somonauk, United States Follow and steady rest, for a clausing round head 13 inch Colchester,
Buy It Now
$38.00 Shipping Condition: Used Location: Medina, United States For sale is a Follow rest for 21" Lathe. Shipping will be $30.00 Thanks for looking and God Bless!
Buy It Now
$23.00 Shipping Condition: Used Location: Medina, United States
Buy It Now
$6.00 Shipping Condition: Used Location: Fairfield, United States Item number ~ 104994. Bin Location ~ COL43.
Buy It Now
$8.00 Shipping Condition: Used Location: Fairfield, United States Item number ~ 105105. Bin Location ~ COL30.
Buy It Now
$185.00 Shipping Condition: Used Location: Oregon, United States Clausing Student Lathe. We are going to part the whole lathe out so we have other parts coming.
Buy It Now
$18.40 Shipping Condition: Used Location: Bennington, United States Clausing Colchester 15” crossfeed hand wheel assembly. Stored in a humid shop and has/had some surface oxidation. Cleaned some and the rest will clean ... morefine. Spins good.
Buy It Now
$20.41 Shipping Condition: Used Location: Dekalb, United States The larger and taller a machine is the more likely they will require more than your average pallet. Pallets that need to be enlarged will require a larger ... morepallet fee.
Buy It Now
$32.90 Shipping Condition: Used Location: Dekalb, United States The larger and taller a machine is the more likely they will require more than your average pallet. Slide Width - 9/16".
Buy It Now
Condition: Used Location: Harrison, United States "PROFESSIONAL SERIES" ENGINE LATHE.2 - 14 mm. 15" x 50" CLAUSING/COLCHESTER. THREE GEARED RANGES. . UP TO 2500 RPM. DISTANCE BETWEEN CENTERS. 50". ELECTRONIC ... moreVARIABLE SPINDLE SPEED IN THREE GEARED RANGES.
Buy It Now
Free Shipping Condition: Used Location: La Habra, United States Free shipping to the lower 48 United States look up pictures for full description of item and exactly as shown International available USPS FLAT RATE
Buy It Now
$8.00 Shipping Condition: New – Open box Location: Fairfield, United States Item number ~ 105057.
Buy It Now
$6.00 Shipping Condition: Used Location: Fairfield, United States Item number ~ 104929.
Buy It Now
$18.40 Shipping Condition: Used Location: Bennington, United States 15” Clausing Colchester lever. In the last pic it’s the lever on the bottom below the middle switchThe last pic is a stock photo and not the lathe this ... morelever came from
Buy It Now
$10.40 Shipping Condition: Used Location: Bennington, United States 15” clausing colchester handle. Last pic for reference only. It shows 5 of the same handles. Listing is for 1 handle
Buy It Now
$25.00 Shipping Condition: Used Location: Graytown, United States Clausing Colchester Lathe Follow Rest Item is in used but working condition. Mount Surface Dimensions: 4 7/16" X 1 1/2" inches) Mount Bolt Distancing: ... more3 1/4" center/center) Mount Hole Diameter: 1/2" inch) Tool Dimensions: 11" X 8" inches) Please note posted pictures for the condition of the tool as it is a used item. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt a
Buy It Now
$85.00 Shipping Condition: Used Location: Oregon, United States You are looking at a Clausing Colchester 13 lathe quick change gearbox in nice shape it could use a good cleaning. We are going to part the whole lathe ... moreout so we have other parts coming. Our zip is 43432.
Buy It Now
Condition: Used Location: Bentley, United States Clausing 21 x 120 Engine Lathe. Steady Rest. Ways look good. Cross-Slide Cross Feeds. 001 to. 016 IPR. 18 to 1400 rpm. 16" 4 jaw Chuck (with 4" hole in ... moreit). Serial number 1/0228/06407 DD. To see machine, check withBill or Richard at Pinpoint Machine in Dry Prong Louisiana.
Buy It Now
Condition: Used Location: United States This lathe is in very nice shape. This Clausing Colchester lathe does need to be cleaned up and the backsplash put back on (leaning on the machine). There ... moreare a few tools that go with it. A three jaw chuck and center and it also has a quick change toolblock with 5 or 6 holders.
Buy It Now
$18.40 Shipping Condition: Used Location: East Falmouth, United States Clausing Colchester Lathe Follow Rest Item is in used but working condition. Mount Surface Dimensions: 4 7/16" X 1 1/2" inches) Mount Bolt Distancing: ... more3 1/4" center/center) Mount Hole Diameter: 1/2" inch) Tool Dimensions: 11" X 8" inches) Please note posted pictures for the condition of the tool as it is a used item. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt a
Buy It Now
$15.10 Shipping Condition: Used Location: Irving, United States Clausing 15" Colchester Clutch D129-0023.
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Clausing Colchester 8000 Series Lathes. Instructions & Parts Manual.
Buy It Now
$100.89 Shipping Condition: Used Location: Dekalb, United States Need to call us?.
Buy It Now
$85.00 Shipping Condition: Used Location: Oregon, United States Spins nice and free.
Buy It Now
Condition: Used Location: Cincinnati, United States 21/32" X 120" CLAUSING/COLCHESTER GAP-BED ENGINE LATHE. Swing Thru Gap 32". Swing Over Saddle Wings 21". Width of Gap, In Front of Chuck 8". Swing Over ... moreBed Ways, Rated 21". Swing Over Cross-Slide 14-1/2".
Buy It Now
$18.00 Shipping Condition: Used Location: Oregon, United States You are looking at a Clausing Colchester 13 lathe thread dial in nice shape it could use a good cleaning. We are going to part the whole lathe out so ... morewe have other parts coming. Our zip is 43432.
Buy It Now
$45.00 Shipping Condition: Used Location: United States Clausing Gearbox.
Buy It Now
Condition: Used Location: Saginaw, United States CLAUSING COLCHESTER ENGINE LATHE. 3" SPINDLE BORE. 10 HP MOTOR WIRED 220 VOLT. 80" CENTERS.
Buy It Now
$150.00 Shipping Condition: Used Location: New Zealand
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Geared Head Centre Lathes. Printed Manual.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States Clausing Colchester C 13" Lathe Operation, Parts Manual. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. ... moreIt may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
$8.00 Shipping Condition: Used Location: Fairfield, United States Item number ~ 107001. Bin Location ~ COL6.
Buy It Now
$15.00 Shipping Condition: Used Location: Fairfield, United States Item number ~ 105062. Bin Location ~ COL7.
|
|
|
|
13" x 36"Clausing-Colchester Engine Lathe
Serial# F-3/60907. 8" 3-jaw chuck, Taper Attachment, Tailstock, Aloris Style Tool Post, 2-speed main motor, 3 H.P. or 1.5 HP, 2355 Max Spindle RPM, is in good running condition, sold as is where is. No charge for loading onto your open top truck or trailer.
|
|
|
Clausing Colchester 8030 15" x 35" Lathe
Clausing Colchester 15" x 35" Lathe Model 8030. S# 60053.35972, 15" Swing, 35" Between centers, 2" Thru hole, 8" 3-Jaw chuck, Flip-Down safety shield, D1-3 Camlock mount, 16 Spindle speeds from 25 to 2,000 rpm, Inch/Metric threading, Thread dial on carriage, Taper attachment, Roller bearing steady rest with 6" Thru hole, Coolant pump& tank in base, Slide out catch pan, Overall Dim. 6' 3"L x 3' 5"W x 4' 4"H, Est. Wt. 2,800 lbs. Would be willing to sell for $8.500 without the steady rest. Video- Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer ... morea 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
Clausing Colchester 11" x 30" Engine Lathe
Clausing-Colchester 11" x 30" Engine Lathe. S/N 2/0021/01394, New Approx 1980. Stock# 26424 Specifications: Swing over Bed- 11” Swing over Cross-slide- 7” Distance between Centers- 30” Spindle Nose- D1-3 Camlock Spindle Bore- 1 3/8” Spindle Speeds- 30-2000 RPM Number of Threads- 32 Range of English Threads- 80 to 3.5 TPI Number of Metric threads- 15 Range of Metric Pitches- 0.5mm to 6mm Motor- 2 HP Weight- 990 lbs Equipped with: 3-Jaw Chuck Steady Rest Back Splash Guard PRICE: $4.995.00 USD FOB TRUCK DAYTON OH WAREHOUSE Offered subject to prior sale. Buyer responsible for local pick up or shipping arrangements. Standard MDNA 30 day return privilege. Freight prepaid(by buyer) if proven mechanically unsatisfactory or repair at seller option. Local sales tax is 7% if applicable. We accept paypal. Company check, wire transfer, mc/ visa(call ... morewith info) cash as acceptable means of payment.
|
|
|
13" x 32" Clausing Colchester Engine Lathe
13" x 32" CLAUSING COLCHESTER ENGINE LATHE. Serial Number: LVM25G1RJV/02550 Equip& Specs: Series 8000. Age: 1980's Actual swing: 13-3/4" Distance between centers: 32" Swing over cross slide: 7-3/4" Swing thru gap: 21" 1 3/4" Hole Thru Spindle. Inch/ mm threading. Sino Two Axis Digital Readout(new) Electronic variable spindle speeds: 0-3250 RPM. 4MT Tailstock. 10" Adjust tru style 3 Jaw Chuck 10" 4 Jaw Chuck. Coolant Pump. Manual Weight: 3400 lbs. Elect Specs: 10 HP; 480/3/60. Condition: Excellent(Government Storage) Location: 26470 Lakeland Blvd. Euclid, OH 44132. Guarantee: 30 day return privilege- Freight prepaid by Buyer. Terms: Net With Order. Price: FOB Location. $8.000.00. Stock# S21304. If you have any questions regarding this machine or its tools. Please don't hesitate to email ... moreus with questions. Most emails will be responded to within 24 hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines for sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. We can also send videos upon request of the machinery in action if you aren't able to make it in to our facility. Shipping is of the responsibility of the buyer. But a free quote can be given after purchase has been made. Contact us for more information on shipping or arrangements. This machine is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc.
|
|
|
Clausing Colchester 17/28" x 80" Gap Bed Engine Lathe W/ Taper Attach. & Coolant
Clausing Colchester Model 8000 Mascot. 17" X 80" with 28" Swing in gap.Taper Attachment, 3 and 4 jaw chuck. Specification Description Swing, 17" Swing Over Carraige, 10.5" Swing in Gap, 28" Center Distance, 80" Spindle Nose, D1-8, Spindle Hole, 3- 1/16" Spindle RPM, 20- 1500 rpm, Spindle Horse Power, 10 Hp, No. of Gears, 16, Feeds English(13) 0.002" to 0.32" Per Rev. Feeds Metric(13) 0.06 mm to 1.0 mm Per Rev. Threads English(38) 2-72 TPI, Theads Mitric(40) 4-14 TPmm, Theads Diametral(27) 8-60 DP, Theads Mudule(18) 0.3- 3.5 mod. Voltage, 220/440 3 Phase 60 Cycle, Overall Dimensions, 141" L x 51" W x 56" H, Weight, 4.900 lbs. Equipped With: 12" 3-jaw. 16" 4-jaw Taper Attachment Coolant System and Splash Guards Enco Tool Post and Holders 12" 3-Jaw Chuck 16" ... more4-Jaw chuck Face Plate Steady Rest Follow Rest Work Light Drill Chuck and Arbor 4 Position Carriage Stop. This machine is in great mechanical condition NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. If you wish to try to ship a different way. Please contact us to discuss before making arrangements. Dimensions should be above. Please contact Erik for help on getting Freight Rates(Serious Buyers only-Please don’t waste our time) at(847) 338-7139
|
|
|
Clausing Colchester 16" x 50" CNC 2000 Lathe
Clausing Colchester 16" x 50" CNC 2000 Lathe Model CNC 2000. S# L2250SFB-02140, 16" Swing, 50" Between centers, 10" 3 Jaw all steel chuck w/ reversible jaws, D1 Camlock mount, Spindle speeds: Low from 88 to 317 rpm- Medium from 255 to 917 rpm- High from 799 to 2,750 rpm, GE Fanuc O-T Programmable control, 2" Thru hole. Aloris quick change tool post with 5 holders, No. 5 morse taper on tailstock, Rotary plug transformer that supports 208/230/380/415/460/575v, 7.5kw Wired on 460v 3ph, Low hour machine, With operations& service manuals, Overall Dim. 8' 4"L x 5' 9"W x 5' 5"H, Est. Wt. 5,000 lbs. Video- http:youtu.be/34B7EjKaln0 Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. ... moreWe also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
17"/17.2" x 60" CLAUSING-COLCHESTER ENGINE LATHE MODEL # 17 QUOTE #26930
QUOTE# 26930 17"17.2" x 60" CLAUSING-COLCHESTER ENGINE LATHE Serial No 7/0016/00298. New 1966, Model 17 EQUIPPED WITH: 10" 3-Jaw Chuck w/Jaws Hardened Gears- Induction Hardened& Ground Bed Ways Universal Gear Box(U.S. and Metric Threads) 4-Way Tool Post CATALOGUE SPECIFICATIONS: Hole Thru Spindle. 3.06" Swing Over Bed Ways. Rated. 17" Swing Over Bed Ways. Actual. 17.25" Swing Over Cross-Slide. 10.5" Distance Between Centers. 60" Cross-Slide Cross-Feed Travel. 12.25" Compound-Rest Travel. 6" Tailstock. Spindle Diameter. 2.94" Tailstock. Spindle Travel. 8.5" Tailstock. Spindle Taper. 5 MT(16) Spindle Speeds. Range. 20 to 1600 RPM Carriage Longitudinal Feeds. 002 to.032 IPR Cross-Slide Cross Feeds. 001 to.016 IPR(38) U.S. Thread Changes. Range. 2 to 72 TPI(40) Metric Thread ... moreChanges. Range. 4 to 14 Main Motor. Horsepower. 10 HP Floor Space Required. L x D. 9'10" x 3'6" Overall Height. 4'4" Weight. Approximately. 5600 LBS PRICE: F.O.B. OUR WAREHOUSE. $6.950.00 ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL
|
|
|
Clausing Colchester Mod.1550 15" x 50" Geared Head Lathe
Clausing Colchester Mod.1550 15" x 50" Geared Head Lathe S/N 6/0015/14813 Specifications: Swing Over Bed: 15-1/4" Swing Over Cross Slide: 9-1/2" Distance Between Centers: 50" Spindle Nose: D1-6 Camlock Spindle Bore: 2-3/16" Taper of Spindle Bore: 4 Morse(16) Spindle Speeds: 25 to 2000 RPM Lead Screw: 1-1/4" Dia. Acme Thread. 4 TPI(45) Inch Threads: 2 to 72 TPI(39) Metric Threads: 2 to 14 TPMM(45) Total Feeds: Longitudinal Carriage Feeds: 0015 to.040 IPR Cross Slide Feeds: 00075 to.020 IPR Tool Slide: Cross Slide Travel: 9-1/4" Compound Rest Travel: 4-3/4" Tool Block Capacity: 1" x 1-3/16" Tailstock: Quill Diameter: 2-5/16" Spindle Travel: 6-1/8" Taper in Quill: 4 Morse Bed Width: 11" Equipped With: Induction Hardened Bed Ways in good condition Aloris CXA Tool Post 10" ... more3 Jaw Rohm Chuck Foot Brake Removable Chip Pan Rear Splash Guard Threading Dial Trav-A-Dial Coolant 7-1/2 HP 220VAC/ 3 Phase Machine Overall Size: 103" L-R x 48" F-B x 49" H Machine Weight: 3.500 Lbs.
|
|
|
Clausing Colchester Mod.8031 15" x 50" Geared Head Lathe
Clausing Colchester Mod.8031 15" x 50" Geared Head Lathe S/N 6/0015/14813 Specifications: Swing Over Bed: 15-1/4" Swing Over Cross Slide: 9-1/2" Distance Between Centers: 50" Spindle Nose: D1-6 Camlock Spindle Bore: 2-3/16" Taper of Spindle Bore: 4 Morse(16) Spindle Speeds: 25 to 2000 RPM Lead Screw: 1-1/4" Dia. Acme Thread. 4 TPI(45) Inch Threads: 2 to 72 TPI(39) Metric Threads: 2 to 14 TPMM(45) Total Feeds: Longitudinal Carriage Feeds: 0015 to.040 IPR Cross Slide Feeds: 00075 to.020 IPR Tool Slide: Cross Slide Travel: 9-1/4" Compound Rest Travel: 4-3/4" Tool Block Capacity: 1" x 1-3/16" Tailstock: Quill Diameter: 2-5/16" Spindle Travel: 6-1/8" Taper in Quill: 4 Morse Bed Width: 11" Equipped With: Induction Hardened Bed Ways in good condition Aloris CXA Tool Post 10" ... more3 Jaw Rohm Chuck Foot Brake Removable Chip Pan Rear Splash Guard Threading Dial Trav-A-Dial Coolant 7-1/2 HP 220VAC/ 3 Phase Machine Overall Size: 103" L-R x 48" F-B x 49" H Machine Weight: 3.500 Lbs.
|
|
|
Exc Clausing Colchester 13x50 Gap Bed Lathe Electronic VS with Tooling
Clausing Colchester Electronic Variable Speed Gap Bed 13 x 50" lathe serial#LMV50G1RJV02274 out of a government facility. Machine paint is all original and the ways are excellent. Comes with your choice of a Buck 6 jaw adjust tru chuck as pictured or a Buck 3 jaw adjust tru chuck. Faceplate, Hardinge 5c collet chuck, Aloris BXA toolpost and holders, steady rest with rollers, Jacobs ball bearing superchuck in the tailstock, and the manual. Also comes with a 4 jaw chuck not in the pics. Machine is 416v from the factory but has a transformer with taps for a range of input voltages. Currently set at 230v 3 phase. Inspection under power in my Aberdeen, NJ shop is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. Payment is by wire, bank check, or company check. PLEASE CHECK MY OTHER ITEMS.
|
|
|
Clausing Colchester Engine Lathe 17"x60'
this is a used clausing colchester 17" lathe located at my home in Pennington N.J. It is in very good running condition and is fully tooled.Features are. 3 jaw chuck. 4 jaw chuck. full face chuck. Taper attachment. coolant system. New 20" tool post and tool holders.turning.Knurling,cutoff.has extra heavy duty cutoff tool. left and right turning and threading insert tools. Internal threading bar. Heavy duty boring bars. Bull live center. Heavy duty drill chucks. Hardinge 2j speed chuck with collets. Rocker style tool holders. Many new high speed tool bits. Steady rest. Motor has new kevlar pully belts. Anderson phase convertor included,runs on standard home 220 as in my garage.motor is 10 hp. Machine is clean and newly painted. Inch and Metric Threading. D1-8 spindle nose. Machine weight is 7000 pounds.very heavy. Due to the weight ... moreof this package. shipping arrangements will have to be made at time of sale.I have a local rigger that is very reasonable and will probably cover the tri-state area.he can also pickup the whole package and bring to a nearby over the road trucking co. Buyer is responsible for all costs. This item can be inspected under power in my garage.It will not be disconnected until sold. Questions call Pete@ 609-532-0016 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-142074e2603-0xff-
|
|
|
Clausing Colchester Tornado 200 CNC Turning Center with 8" Chuck New 1998
Machine Sold with a 30 Day MDNA Money Back Return Guarantee. Seller will load on Buyer's Truck at No Charge. Payment Due 10 Days after Auction Close. Machinery Dealers National Association Member CLAUSING COLCHESTER TORNADO 200 CNC TURNING CENTER Model Tornado 200. S/N C20556, New 1998 Stock# K13970 EQUIPPED WITH: Fanuc 0T CNC Control. Multiple Part Program Storage, RS-232 Port, 8" 3-Jaw Kitagawa BL208 Chuck. 12 Position Tool Turret, All Fanuc Drives and Motors, Programmable Tailstock, Chip Conveyor and Coolant System. 10 VDI Tool Holders. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 20.86" Max Swing Over Carriage. 12.99" Max Turning Diameter. 9.84" Max Tailstock Position. 24" Standard Chuck Size. 8" Cross Travel(X-Axis) 8.46" Longitudinal Travel(Z-Axis) 15.74" Feed Range(Infinitely Variable) 1-394 ... moreIPM Rapid Traverse Rate(X-Axis) 394 IPM Rapid Traverse Rate(Z-Axis) 787 IPM Number of Turrets. 1 Tool Positions. 12 Total Bar Capacity. 2.55" Spindle Nose. A2-6 Spindle Speed Range(1 RPM Increments) 45-3500 RPM Spindle Horsepower. 15 KW 20 HP Approximate Machine Dimensions. 137" x 74" Approximate Machine Height. 73" Approximate Machine Weight. 7600 LBS. CONDITION: Machine Appears to be in Very Good Condition! 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 Summary of Selling Policies Payment We accept business checks. Personal checks, money orders, PayPal, American Expres
|
|
|
Clausing colchester 21x80 engine lathe w aloris
Clausing Colchester 21" lathe in very good condition. Used in a low volume one man repair shop. Ways are very clean, with no noticeable wear, and two very small nicks as shown in picture. Comes with tooling shown, and a three jaw and four jaw pratt burnerd chucks. Full bed length measures around 89" Please ask any detailed questions. Buyer responsible for shipping, i will strap to pallet and load on truck at no additional charge. I will also deliver for free within 20 miles and I may also be able to deliver further at additional charge.
|
|
|
1998 Clausing Colchester Storm 80 CNC Lathe Turning Center w/ Barfeed Fanuc 21-T
1998 Clausing Colchester Storm 80 CNC Lathe w/ Barfeed Machine is in excellent condition and can be seen under power as needed Specifications: Control.Fanuc Series 21-T X-Axis Travel.6.5" Z-Axis Travel.13.78" Spindle Speed.6000 RPM Spindle Nose.A2-5 Swing.16.54" Maximum Turning Diameter.6.69" Maximum Shaft Length.13.78" Bar Capacity.1.65" Rapid Traverse X/Z Axis.394/591 IPM Spindle Motor.15 H.P. Electronics.230/60/3 w/Transformers for 208/60/3 Approximate Weight w/Barfeed. 7.500 LBS. Approximate Machine Dimensions.117"L) x 74"W) x 73"H) Equipped With: RS-232 Port MBF 1000 Magazine Barfeed Chip Conveyor Programmable Tailstock 6" Collet Chuck(12 to 15) VDI-30 Tool Holders Parts Catcher Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra ... morecosts. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items
|
|
|
Clausing Colchester 8100 Engine Lathe Turning Steady Rest 4 Jaw Chuck Tailstock
Clausing Colchester 8100 Engine Lathe Machine is in excellent condition and can be seen under power as needed Specifications: Model.8100 Swing Over Bed.21" Swing Over Cross Slide.14.5" Distance Between Centers.84" Spindle Speeds.16) 20-1.600 RPM Spindle Nose.D1-8 Hole Thru Spindle.3.5" Threads.Inch/Metric Inch.38) 2-72 TPI Metric.45) 0.4-14mm Feeds.45) 0.002"0.016" Cross Slide Travel.12" Tailstock Quill Taper.5 MT Tailstock Quill Travel.7" Dimensions.138"L x 42"W x 52"H Approximate Weight.9.000 LBS. Equipped With: 3-Jaw Chuck 4-Jaw Chuck Steady Rest 7" Coolant System Horsepower 121/2 All Available Manuals Please contact Jason Stob 708 790-3358 with any question
|
|
|
Clausing Colchester 13"x36" Metal Lathe 2 Chucks Tracer Gunsmith
Used Clausing Colchester Atlas 13"X36' metal lathe with tooling. Powered by 230v 3 phase two speed motor 3HP with hyd unit for tracer and untested coolant pump in base. 35-1500 rpm and threading 4-112 tpi with quick change gearbox. Acessories and tooling: 6" 3 Jaw reversible chuck. 10" 4 Jaw chuck, follow rest, lantern toolpost with 5ea holders, Live Center, original thread dial, drill chuck on MT3, Hydraulic tracer attachment on back side of carriage, and chip guard. The tracer attachment is untested and missing one center to mount pattern. This allows either a round or flat template to be installed behind the bed and the tracer will duplicate it. Can be used to cut tapers as well. The lathe is on the original cabinet with some dinges, scratches and minor dents. The ways look good, no lip, with minor scratches. The backlash ... moreis about 1/8 turn on all handles. The power feed and threading work fine. Lathe runs fine and all functions seem to work good. Spindle is L0, bore is about 1 1/2" This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
|
|
|
Clausing Colchester 21x80 Gap Bed Lathe, new Digital, Roller Steady rest. QCTP
CLAUSING COLCHESTER 21x80" GAP BED. 8000 SERIES LATHE, LOADED! NEW DIGITAL READOUT! FOLKS. THESE 21" CLAUSINGS ARE GETTING HARDER AND HARDER TO COME BY. THIS ONE CAME IN, RUNS BEAUTIFUL. WE PAINTED IT AND STARTED TO CHECK IT OUT, COULDN'T GET IT TO CUT BETTER THAN.003 IN 10.5" SO WE SENT IT OUT AND HAD THE BED GROUND. THE MACHINE IS LOADED WITH TOOLING. IT COMES WITH A 3 JAW CHUCK SET-TRU CHUCK(BISON OR PRATT BERNERD?A NEW DIGITAL READOUT(2 AXIS) A JACOBS DRILL CHUCK, QUICK CHANGE TOOL POST AND 5 TOOL HOLDERS W/ TOOLS. IT HAS A LIVE CENTER. IT HAS A ROLLER TYPE STEADY REST WITH OVER 8.5" CAPACITY, GAP BED, 3.5" SPINDLE BORE. THERE'S A COUPLE VIDEO LINKS BELOW THAT YOU CAN CLICK ON THAT WILL SHOW YOU THIS MACHINE ACTUALLY RUNNING AND CUTTING PARTS(MOST OF THE COMPETITION DOES'NT SHOW YOU THAT) WE REPLACED ... moreTHE HALF NUTS(THREADING) THE DRIVE GEAR AND SEALS IN THE APRON(WHICH IS WHY MOST COLCHESTERS LEAK OIL OUT OF THE APRON) SOMEONE RECENTLY CHANGED THE FORWARD CLUTCHES IN THE HEAD, NEW WIPER KIT(WHICH WAS OVER $700 FROM CLAUSING FOR THE SADDLE AND TAILSTOCK) I'VE TRIED TO GET AS CLOSE AS POSIBLE TO THE WAYS SO YOU CAN SEE THEIR CONDITION, TO PUT IT THE WAY TONY USED TO SAY"THEY'RE GREAT" I WANT TO NOTE THAT SOMEONE DINGED UP THE REAR SPLASH GUARD BEYOND OUR BODY MANS' CAPABILITIES SO IT'S GOT SOME DINGS IN IT. IT IS WIRED FOR 440 VOLT THREE PHASE OPERATION. THIS IS ONE THAT YOU CAN BUY WITH CONFIDENCE. WE'RE A SMALL SALES OUTFIT BENT ON SELLING GOOD USED MACHINERY AT A FAIR PRICE. JUST CHECK OUT MY PRICES VERSES MY COMPETITION. WE DON'T HAVE 15000 FEEDBACKS, LAST CHECK I THINK I'M AROUND 750 OR SO. WE'VE EARNED THEM ONE AT A TIME. CHECK OUT OUR FEEDBACKS, YOU'LL SEE TIME AND TIME AGAIN THAT I DESCRIBE MY EQUIPMENT WELL AND GET IT THERE SAFELY. VIDEO LINKS TO THIS MACHINE RUNNING VIDEO PROMO OF LEE'S MACHINERY WE'RE A FOUR MAN SHOP. LEE(MY DAD) HAS BEEN DOING THIS FOR 50 YEARS AND IS PRETTY MUCH RETIRED, MIKE(ME) WHO'S BEE
|
|
|
Clausing/Colchester 15" x 48" Engine Lathe FREE Shipping
Clausing/Colchester 15" x 48" Engine Lathe S/N F4/57817 5HP 220V 3ph(2) speed motor(16) spindle speeds from 37-1500 rpms Equipped with: 10" 3 jaw chuck 12" 4 jaw chuck 14" faceplate Steady rest Rocker toolpost Very nice Colchester Lathe. Made in England!
|
|
|
2002 CLAUSING COLCHESTER, 18"/28" x 80" Removable Gap Engine Lathe,
Now available for your inspection under power and purchase at our Warehouse in Beautiful Downtown Miamisburg. Ohio is this"ABSOLUTELY BEAUTIFUL" As New" Clausing Colchester Model Mascot 18" VS. 18"28" swing X 80" cc Variable Speed Engine Lathe, w/Taper Attachment and Inch and Metric Threading. We have run this machine through all speeds and feeds and find it to be in Absolutely As New. Excellent Operating and Cosmetic Condition. Further. It is equipped with a very desirable 3 1/8" Spindle Hole, Power Rapid Traverse in Both Axes, Inch and Metric Threading, Removable Gap, Steady Rest, Digital Readout(DRO) Tool Post w/ 6 Tool Holders, and Taper Attachment. These Clausing Colchester Engine Lathes are Excellent Engine Lathes Built With a Lot of Quality in Great Britain. Specifications are as follows: Manufacturer: ... moreClausing Colchester CLAUSING COLCHESTER GAP BED VARIABLE SPEED LATHE MODEL: MASCOT 18" VS SERIAL NUMBER: MC0323 Year: 2002 GENERAL SPECIFICATIONS Swing Over Bed: 18.1" Swing In Gap: 28.74" Swing Over Cross Slide: 10.62" Spindle Bore: 3" Distance Between Centers: 80" Spindle Nose: D1-8 Camlock Spindle Speeds. Variable: 20 to 2000 RPM Longitudinal Feed Range(In) 0016- 11 In/Rev Longitudinal Feed Range(mm) 041- 2.79 mm/Rev Cross Feed Range(In) 0008- 055 In/Rev Cross Feed Range(mm) 02- 1.4 mm/Rev Number Of Inch Pitches: 73 Range Of Inch Pitches: 2- 84 TPI Number Of Metric Pitches: 51 Range Of Metric Pitches: 2- 14mm Cross Slide Travel: 11.81" Top Slide Travel: 7.5" Tailstock Quill Diameter: 3.74" Tailstock Quill Travel: 5.7" Tailstock Center: No. 6 M.T. EQUIPPED WITH 15 HP Main Motor. 415V with Universal Transformer 12" 3-Jaw Chuck Steady Rest Inch/Metric Threading Taper Attachment Quick Change Tool Post w/ 6 Holders Digital Readout w/ Preset Thread Dial Hardened and Ground Ways Removable Chip Pan Full Length Rear Splash Guard Approximate Dimensions: 140"L x 51"W x 51"H Approximate Weight: 6200 Lbs. F.O.
|
|
|
15" x 50" CLAUSING-COLCHESTER ENGINE LATHE, w/12" BUCK Chk & ALORIS TOOL POST
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 15" x 50" CLAUSING-COLCHESTER ENGINE LATHE. W/12" BUCK Chk& ALORIS TOOL POST Ref# 152555 iammdna XLATHE 15" x 50" CLAUSING-COLCHESTER ENGINE LATHE MODEL: 8031. S/N: 6/0015/16491, ... moreNEW: 1975 SPECIFICATIONS: SWING OVER BED. 15-1/4" SWING OVER CROSS SLIDE. 9-1/2" DISTANCE BETWEEN CENTERS. 50" BAR CAPACITY THROUGH SPINDLE. 2-1/8" HOLE THRU SPINDLE. 2-3/16" SPINDLE NOSE. CAMLOCK SIZE. D1-6" SPINDLE SPEEDS(16) 25- 2000 RPM. HEADSTOCK& TAILSTOCK SPINDLE TAPER. 4 MORSE. TAILSTOCK SPINDLE TRAVEL. 6-1/8" TAILSTOCK SPINDLE DIAMETER. 2-5/16" WIDTH OF BED. 11" FEEDS: LONGITUDINAL(45) 0015- 040 IPR. CROSS(45) 00075- 020 IPR. THREADS: INCH(45) 2- 72 TPI. METRIC(39) 2- 14 mm. DIMENSIONS. 96" x 38" x 52" APPROX WEIGHT. 3.500 LBS. EQUIPPED WITH: INCH/METRIC THREADING CAPABILITY. 12" 6-JAW BUCK CHUCK. ALORIS MODEL: CA QUICK CHANGE TOOLPOST. STEADY REST. FOLLOW REST. COOLANT SYSTEM. 7.5 HORSE POWER SPINDLE DRIVE MOTOR INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE! CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More Clausing-Colchester Machines Click Here For
|
|
|
Clausing-Colchester 12" VS Geared-Head Engine Lathe 13x40 Toolroom w/Accessories
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2317270 A: 0013000000CXCfg O: 0065000000S2DZb PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Clausing-Colchester 12" VS Geared-Head Engine Lathe 13x40 Toolroom w/Accessories. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Clausing-Colchester Model: ... more12" VS Type: Geared-Head Engine Lathe Serial No: 23/0003/00350 Features/Specifications: Swing Over Bed: 13" Distance Between Centers: 40" Swing Over Cross-Slide: 8-5/8" Hole Thru Center: 1-3/8" Cross-Slide Travel: 6-7/8" Center Tapers: No. 3 MT Variable Speed Drive: Low: 60-400 rpm High: 400-2500 rpm Motor: 2 HP Electrical: 208V- 7.2A- 60 Hz- 3 PH Acu-Rite Micro-Line DRO Tailstock& tool post Foot brake Coolant system Work lamp Includes: Assortment of chucks. Faceplates, gears& other tooling(as shown) Instructions& parts manuals Dimensions& Weight: Dimensions: L 72" x W 32" x H 62" Shipping Weight: 1.520 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Regular. Thorough maintenance performed by previous owner since new Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. L
|
|
|
Clausing Colchester 17x100 Lathe
8000 series Weight 5600 pounds 100 inch between centers 3 jaw and 4 jaw chucks Spindle bore 3 inch 38 threads: 2 to 72 t.p.i. 40 metric pitches: 4 to 14 mm 18 metric modules: 3 to 3.5 mod. 27 Diametral pitches: 8 to 60 D.P. Worked well when ran last. Cuts precision, Sold as is no refunds Buyer pays for shipping
|
|
|
17x60 Clausing Colchester Engine Lathe (Will Ship Freight)
Clausing 17x60 geared head lathe. The machine looks to be in fair usable condition however we have not tested it. Our inventory is getting too big and we need to let some things go. It is dirty and needs a bath. Also in the photos it is missing the chip pan and back splash however we have them and they come with the lathe. Machine comes with the following attachments: Inch and metric threading-Cam lock chuck mount-Large spindle bore-Steady rest-3 jaw chuck-4 jaw chuck-Live center for tailstock-0-1/2 Jacobs drill chuck-Adjustable carriage micro stop-Additional miscellaneous items We can arrange freight and would be happy to send you a quote to have this machine shipped to your location from ours. Feel free to give me a call with any other questions about this item. Also feel free to contact me about other items. Including other leblond engine ... morelathes and Bridgeport mills, that will be posted soon. 618-616-6736 Thank you for your interest. Jonathan Chandler
|
|
|
Clausing Colchester Electronic Mastiff CNC Tech Lathe
Click to view larger photo Specification Description Swing Over Bed, 21.8" Swing Over Cross Slide, 14.5" Width Of Bed, 15.7" Center Distance, 80" Cross Slide Stroke, 11.4" Turning Length, 75.6" Spindle Motor, 15 HP, Spindle Speeds High Range, 140-1.800 RPM, Spindle Speeds Mid Range, 48-612 RPM, Spindle Speeds Low Range, 16-204 RPM, Spindle Nose, D1-11 Camlock, Spindle Bore, 3.5" Feed Range, 0.0003-19 IPM, Rapid Traverse Rate, 118 IPM, Tailstock Diameter, 3.7" Tailstock Stroke, 7" Tailstock Taper, Morse#6, Approx. Machine Dimensions, 162" x 68" x 70" Approx. Machne Weight, 7.400 lbs, Equipped With: Fanuc 20-TA With Teach(Guidance) Programming Electronic Handwheels 15" 3-Jaw Manual Chuck 6" Square Tool Post Coolant System Full Enclosure Tool Block holder dust collector
|
|
|
Colchester Clausing Lathe Gap Bed 15958
in titles& description Name: Colchester Clausing Lathe Gap Bed, Ticket# 15958, Size: 16' X 48" Manufacturer: CLAUSING, Item located at: Morrisville. PA, Serial# 9/0016/03337, Condition: Used, Terms& Condition: As is where is, Selling Price: $ Description: 15" Colchester Clausing Lathe with tooling. Attachments and checks 9' Over cross slide 10" Gap Bed Spindle speed 25- 200 RPM | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
13" x 40" Clausing Colchester Model VS- 13 Engine Lathe, S/N 21-0002-00419 DD
Thanks for looking at our auction. Constantly getting new inventory. Subscribe to our New Arrivals Monthly Newsletter and check out the latest machines! Over 1000 Machines in Stock Across the Country. Thank you. IA Machinery eBay. 6474- Clausing Colchester Engine Lathe Manufacturer: Clausing Colchester Model: VS- 13 S/N: 21-0002-00419 DD Specifications: Swing Over Bed 13" Swing Over Cross Slide 8.25" Distance Between Centers 40" Spindle Speeds(Variable) 20- 3.100 RPM Spindle Nose D1- 4 Hole Through Spindle 1.65" Threads: Inch(56) 2- 72 TPI Metric(20) 0.2- 14 MM Feeds 0.0007" 0.014" Cross Slide Travel 8.25" Tailstock Quill Travel 4.5" Tailstock Quill Taper#4 MT Dimensions(L x W x H) 99" x 51" x 51" Weight 3.300 Lbs. Equipped With: 3 Jaw Chuck Lever 5C Collet Closer Tool Post Digital RPM ... moreIndicator Chuck Guard Coolant System Splash Guard Work Light Horsepower: 4 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearanc
|
|
|
Clausing Colchester Storm CNC 200A Lathe Machining Center 4200RPM
1996 Clausing Colchester STORM 200A Serial# C20418 CNC Turning Center Control: Fanuc O-T Swing: 20.80" Maximum Machining Diameter: 9.8" Distance Between Centers: 29.5" Spindle Speeds: Machine is rated for 5.000 RPM, Chuck is rated for 4200 RPM Main Motor: 25 HP Spindle Nose: A2-6 Number Of Turret Positions: 12 Chuck Diameter: 10" Number of Jaws: 3 Bar Capacity: 2.610" Tailstock Taper: MT#5 Tailstock Travel: 5” Z-Axis Travel: 15.75" Machine Weight: Approx. 7.600 LBS-EQUIPPED WITH- Programmable Tailstock 10" 3-Jaw Chuck Coolant System 12-Position Duplimatic TDT Turret 3 Tool Holders Chip Tray Foot pedal for chuck We acquired this machine from a government military auction and shows very little to no use. The controller batteries were dead so I have no way to accurately tell the hours. We replaced the"keysheet" ... morefor the buttons. The red plastic piece on the Emergency stop switch, and the 3 hydraulic gauges as the old ones had cosmetic issues. Please look at the videos below and ask any questions you may have. This machine can be seen under power here in Murfreesboro, TN. I can arrange shipping feel free to contact me for a quote. This machine has too many capabilities that we will never use. Please feel free to make me an offer at 616-901-9170. The cutting tool used in the video is not included in listing. Please call or email me with any questions you may have. Machine is being sold"As Is" PayPal is NOT accepted. The preferred method is by check or ETF. Shipping is FOB Murfreesboro, TN 37129. I have the equipment to load your truck or I can arrange shipping. I may even be able to bring this machine to you if you have a way to unload it. Consolidated Mill Supplies(CMS) has been a leader in the particle size reduction and selection industry since 1946. Starting as a regional supplier to feed mills. Our business has grown into supplying customers in various industries in all 50 states and over ten foreign countries. CMS strives to unite our many suppliers with our
|
|
|
CLAUSING COLCHESTER 21"/32" x 80" Gap Bed Engine Lathe
21"32" x 80" CLAUSING COLCHESTER Geared Head Gap Bed Engine Lathe. S/N Pending Stock# 31982 Specifications: Swing over bed- 21" Swing in gap- 32" Swing over saddle wings- 21" Swing over cross slide- 14½" Distance between centers- 80" Spindle nose- 11" D-1 Camlock Bar capacity- 3½" Hole thru spindle- 3-9/16" Spindle speeds(16) 18 to 1400 rpm Thread changes(38) 2 to 72 tpi Longitudinal feeds(45) 002 to.032" Cross feeds(45) 001 to.016" Tailstock center- 5MT Tailstock spindle travel- 7" Main motor- 12½ HP Overall dimensions- 138" x 42" x 52" Weight. Approx- 8000 lbs. Equipped with: 3-Jaw Chuck Taper Attachment Gap Bed Steady Rest Inch/Metric Threading Chip Pan Back Splash Guard Offered as is. PRICE: $8.950.00 USD FOB TRUCK DAYTON OH. Offered locall ... morey an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
|
|
|
Clausing-Colchester 13" x 40" Toolroom Engine Lathe - 5 HP/480V/3 PH - 5/0016
SKU: 2506790 A: 0013000000CXCfg O: 0065000000Uhy7M PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Clausing-Colchester 13" x 40" Toolroom Engine Lathe on Stand- 5 HP/480V/3 PH. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great buying formats to serve you– Bid Now Auctions and Fixed Price Buy Now listings. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles, industrial machine tools, general rental tools and other heavy equipment. View our Fixed Price store- also featuring construction machinery. Fleet vehicles& other industrial equipment in a convenient Buy It Now(or Best Offer) ... moreformat. Bid with confidence- 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access available for US and International shipping- for estimates click the Request Freight Estimate button above. Overview: Make: Clausing-Colchester Model: 13" No. 5/0016/10182) Type: Toolroom/Engine Lathe Serial No: 10182 Features/Specifications: Swing over Bed: 13" Distance Between Centers: 40" Spindle Speeds: 30- 2.500 rpm(16-pos. Hole Thru Center: 1-5/16" approx. Spindle Motor: 3.75 kW(5 HP) 230/460V- 13/6.5A 1720 RPM- 60 Hz- 3 PH 4.5" chuck(shown installed; MT4) Dimensions& Weight: Machine Dimensions: L 80" x W 36" x H 48" Shipping Weight: 2.100 lbs Condition: Good- working at time of decommission Normal to heavy wear from age& previous use in working industrial environment Some surface rust noted to bed and other components Belts off of motor pulley(see photo) Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Ca
|
|
 |