|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: For parts or not working Location: Fort Myers, United States Pre Owned Lodge& Shipley Model 2CT40i High Speed Power Squaring Shear New 1978 Serial Number 50046 GENERAL SPECIFICATIONS: Capacity(Mild Steel) 12 ... moreGauge Distance Between Housings 42 3/4” Back Gauge Range 0- 24” Throat 10.5” Strokes Per Minute 120 Hold Downs: 5 Distance Under Hold Downs 3/8” Main Drive Motor 1.5 HP 230/460/3/60 EQUIPPED WITH: Electric Foot Switch Front Operated Manual Back Gauge with Readout Adjustable Blade Clearance Hand Slots in Table One Shot Lubrication Interlocked Steel Construction Approximate Overall Weight 3450 Lbs Approximate Overall Weight 65” L X 50”W X 71” H Loading onto your truck included Any Questions? 414-264-5848 Alex More pictures at alecomachinery.com
Buy It Now
Condition: Used Location: Rochester, United States What is seen in the pictures is what is included in the sale. Local pickup in Rochester, NY 14606 is free.
Buy It Now
Condition: Used Location: Louisville, United States The lathe’s swing over carriage is 14-1/2", swing over cross slide is 8-1/2", and the center distance available is 30". Serial number 48346. NO WARRANTY. ... moreWITH ALL FAULTS?. GOVERNING LAW. WARNING OF HAZARDS.
Buy It Now
Condition: Used Location: Pomona, United States COOLANT TANK AND PUMP - BUILT INTO LATHE. DISTANCE BETWEEN CENTERS: 108". SWING OVER BED: 25". OVERALL BED LENGTH: 130". NUMBER OF SPEEDS: 24 SPEED GEAR ... moreBOX WITH 20 HP MAIN DRIVE MOTOR. WEIGHT: 20,000 LBS.
Buy It Now
Condition: For parts or not working Location: El Paso, United States
Buy It Now
$82.17 Shipping Condition: Used Location: Atwater, United States GOOD SHAPE, VERY MINIMAL WEAR AT THE CORNERS. WEIGHS ABOUT 30#.
Buy It Now
Condition: Used Location: Fayetteville, United States 20" x 54" Lodge& Shipley Model AVS2013 Geared Head Engine Lathe(1965) Specifications Swing over bed ways: 20.5" Swing over cross slide: ... more13.5" Distance between centers: 54" Spindle speeds: 0- 1500 RPM, Spindle headstock gear ranges: 3, Equipped With: Taper Attachment. Hardened and ground bed ways, and apron control, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Buy It Now
Condition: Used Location: Coffeyville, United States Approximate weight: 10,000+ lbs. SDL/#12263/SURPLUS/ (1) E. RIGHT ANGLE LATHE. 11 1/2" THRU HOLE.
Buy It Now
Condition: Used Location: Orange, United States
Buy It Now
Condition: Used Location: Cincinnati, United States Swing Over Bed Ways, Rated 20". Swing Over Bed Ways, Actual 24". Swing Over Cross-Slide 17.5". Floor Space Required, L x D 144" x 49". Main Motor, Horsepower ... more15 HP. Distance Between Centers 78". (55) Thread Changes, Range 1 to 64 TPI.
Buy It Now
Condition: Used Location: Cedarburg, United States Distance between Centers (B.C.): 84". Length of Bed (LOB): 96". Model #: Blue Chip 18. Thread cutting Rates (TPI): 2-1/2 to 160. Main Motor: 15 hp. 220/440 ... moreVolt, 3 ph, 60 Hz.
Buy It Now
Condition: Used Location: Toledo, United States SPINDLE HOLE. 2-1/2”. SPINDLE SPEED. . 9 TO 500 RPM. STEADY REST. . RAPID TRAVERSE. YES. 2.5 TO 160 IPR. THREADING. 1 TO 64 TPI.
Buy It Now
Condition: Used Location: Cincinnati, United States Serial No 44594, Model 2013, Series "POWERTURN". ENGINE LATHE. Distance Between Centers 78". Swing Over Cross-Slide 13". Swing Over Bed Ways, Rated 20". ... more(24) Spindle Speeds, Range 24 to 1740 RPM. 12" 3-Jaw Chuck w/Jaws.
Buy It Now
$3.97 Shipping Condition: Used Location: Addison, United States Lathes Operator Instruction Manual.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Port Richey, United States Operator's Manual. We here, at Rebuilt Machinery understand you need your manual, NOW! You need your PDF ASAP and we understand it! Your order is our ... morePRIORITY! Every manual is carefully reproduced using Adobe software to make sure we get it right!
Buy It Now
$4.99 Shipping Condition: Used Location: United States Used Manual - Dusty Dirty Stinky, may have tattered or loose pages and ink; Happy to answer any questions,
Buy It Now
Condition: Used Location: Toledo, United States CHUCKS FRONT & REAR. 21" 4 JAW. HOLLOW SPINDLE HOLE. 8-7/8" . SPINDLE SPEEDS. 8 - 451 RPM. SWING OVER THE BED. . 27-7/8". DISTANCE BETWEEN CENTERS. 120".
Buy It Now
Condition: Used Location: Toledo, United States SWING OVER WAYS. 18". MODEL. 13 POWERTURN. MOTOR. 15 HP. CENTER DISTANCE. 30". SWING OVER CROSS. 10". LEADS. 0039 TO 250 LEADS PER REV. SPEEDS. . 7 TO ... more1740 RPM.
Buy It Now
Condition: Used Location: Cincinnati, United States Left Hand Side Lathe Bed With 20' Center Distance. ENGINE/BORING LATHE. Right Hand Side Lathe Bed With 8' Center Distance. (1) Regular Lathe Carriage ... moreOn Right Hand Side Of Bed. Distance Between Centers. 240".
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. SPINDLE SPEEDS. . (27) 9 TO 500 RPM. DISTANCE BETWEEN CENTERS. . 150". (66) 2 TO 120 TPI. SWING OVER WAYS. . 22".
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. DISTANCE BETWEEN CENTERS. 78". May inspect under power. SPINDLE SPEEDS. (24) 14 TO 1160 RPM. Performs as expected. 5 HORSEPOWER. ... moreTHREAD DIAL. .
Buy It Now
Condition: Used Location: Canada Between Centers… 80″. Electric motor……………. 20 HP / 3PH. Sold as is, but warranted in good condition. Chuck diam………………. Spindle bore ……………… 1-3/4″.
Buy It Now
$13.00 Shipping Condition: Used Location: Greenfield, United States
Buy It Now
$6.90 Shipping Condition: New Location: Wilton, United States I have a large database and have only listed a fraction of thus far. Parts Manual, to be printed in black and white. Things happen. I will be happy to ... morework with you. Comb binding.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I’ve read Parts of these Programming and Operations ... moreManuals. There are So Many Possibilities. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
Condition: Used Location: Canada Well-built and well designed precise engine lathe. between Centers…. 78″. Chuck diam………………. 20”. Electric motor……………. 20 HP / 3PH. We can take care of ... moreALL logistics, making it a seamless and economic choice for you!
Buy It Now
Condition: Used Location: Cincinnati, United States New 1969, Serial No 48128, Model 3220. ENGINE/BORING LATHE. Left Hand Side Lathe Bed With 10' Center Distance. Right Hand Side Lathe Bed With 21' Center ... moreDistance. (1) Regular Lathe Carriage On Left Hand Side Of Bed.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Pictures of the Machine Says A Thousand Words. I will search ... morefor your specific Needs Continually. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
$4.99 Shipping Condition: Used Location: United States Used Manual - Dusty Dirty Stinky, may have tattered or loose pages and ink; Happy to answer any questions,
Buy It Now
$4.99 Shipping Condition: Used Location: United States Used Manual - Dusty Dirty Stinky, may have tattered or loose pages and ink; Happy to answer any questions,
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Rebuild Repair Seal Kit for Case 580CK Model 33 Backhoe 1966-1971 (2 Sets). Fit for Case 580CK with Model 33 Backhoe Swing Cylinder Years 1966-1971. Fits ... moreboth with Snap-In and Press-In Wiper. Fits Rod Size: 1-3/4" and Bore Size: 4".
Buy It Now
$4.99 Shipping Condition: Used Location: United States Used Manual - Dusty Dirty Stinky, may have tattered or loose pages and ink; Happy to answer any questions,
Buy It Now
$96.00 Shipping Condition: Used Location: Greenfield, United States
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. It may not have the original color cover as it is a ... moreDigitally Enhanced Quality Bound Copy. I’ve read Parts of these Programming and Operations Manuals.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Pictures of the Machine Says A Thousand Words. I will search ... morefor your specific Needs Continually. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
$18.00 Shipping Condition: Used Location: Greenfield, United States
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Pictures of the Machine Says A Thousand Words. I will search ... morefor your specific Needs Continually. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
$6.90 Shipping Condition: New Location: Wilton, United States I have a large database and have only listed a fraction of thus far. Parts Manual, to be printed in black and white. Things happen. I will be happy to ... morework with you. Comb binding.
Buy It Now
$22.00 Shipping Condition: Used Location: Mccordsville, United States Gear racks etc. THEY ARE ALL VERY CLEAN WITHOUT BLACK FILTH IN THE TEETH. BUY IT NOW IS FOR ONE GEAR.
Buy It Now
$4.99 Shipping Condition: Used Location: United States Used Manual - Dusty Dirty Stinky, may have tattered or loose pages and ink; Happy to answer any questions,
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. (60) 2.5 TO 160 THOU PER REV. DUAL CHUCKS. 24" 4 JAW. SERIAL. . 45031 MODEL. . 2516 HOLLOW SPINDLE. SPINDLE HOLE. . 12-5/8".
Buy It Now
Condition: Used Location: Lancaster, United States Machine Model No.: 1610. Center Distance: 78". New Date: Jan. 1970. (1) 16" and (1) 18" Face Plates with D6 Camlock Mounts. Swing Over Bed Ways: 18". ... moreWired for 3 Phase, 60 Hz, 230 / 460 Volts. (1) 14" Roller Type Steady Rest.
Buy It Now
Condition: Used Location: Centralia, United States Below explains what to do once you are on that page.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Capacity: 17" X 57". See details below. Larger pallet sizes cost more. Unless noted, item has not been tested, and condition is unknown. We reserve the ... moreright to cancel any order. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
$75.00 Shipping Condition: Used Location: Huntington, United States All of the guides move freely, and all of the locking screws move. The only piece not original is the bed nut. -excellent shape, very clean. This is a ... moreheavy piece at 50lbs.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Our internal inventory number on this product is NP# MN90-DD. OUR RETURN POLICY. Due to the nature of this item. All sale of manuals are final! If you ... morehave a problem with the item upon receipt contact us immediately and we will attempt to address the issue! To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! PLUS.with the way Ebay has changed around some categories. You won't want to miss any of our $.01 NO RESERVE auctions! DESCRIPTION You are bidding on a Lodge and Shipley Operators Manual for 10" Hi-Turn Lathes. Publication Number: Not Listed. Copyright: Not Listed App. Weight: 1 lbs. It is(+/ 40 Pages. Seems complete and in generally Fair used condition! These manuals ratings(Poor. Fair, Good) are based mostly on their usability for their information and partly on cosmetic condition! We will be listing many different types of manuals! If there are any obvious deficiencies. We will always strive to let you know, but things can get overlooked. Please check out our Feedback. We are straight shooters! NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $7.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $9.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express In
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. SPINDLE SPEEDS. . (24) 21 TO 1740 RPM. (60). 0075 TO. 0469 IPR. THREADS. (60) 4 TO 256 TPI. May inspect under power. SPINDLE MOTOR. ... more10 HORSEPOWER.
Buy It Now
Condition: Used Location: Holland, United States We load for free. May inspect under power. MAIN MOTOR. . 30 HORSEPOWER. Performs as expected. DISTANCE BETWEEN CENTERS. SWING OVER CROSS SLIDE. . 32.
Buy It Now
Condition: Used Location: Holland, United States CAPACITY 150 TON. LENGTH OF BED & RAN 12'. FULL LENGTH FOOT PEDAL YES. MOTOR HORSEPOWER 10. DISTANCE BETWEEN SIDE HOUSING 10'6". SHUT HEIGHT (SDAU) 12". ... moreSTROKES PER MINUTE 30".
Buy It Now
Free Shipping Condition: Used Location: Dekalb, United States The manual is in very good condition with no annotations or staining.
Buy It Now
Condition: Used Location: Holland, United States HOLE THRU SPINDLE 12.5". SPINDLE SPEEDS 5 TO 600 RPM. SPINDLE NOSE 20" A1. SWING OVER BED WAYS, RATED 32". SWING OVER BED WAYS, ACTUAL 32.5". CHUCK BORE ... more12-5/8". DISTANCE BETWEEN CENTERS 252" RIGHT SIDE / 120" LEFT SIDE.
Buy It Now
Free Shipping Condition: Used Location: Rancho Cucamonga, United States This brochure features the Lodge & Shipley 4 Way Power Rapid Traverse Lathes, a powerful metal cutting tool suitable for industrial use. The brochure ... moreincludes detailed information about the product's features and capabilities, including its manual operation mode and the brand's reputation for quality. Whether you're looking to improve your metalworking skills or expand your business capabilities, this brochure is a valuable resource for understanding the benefits of the Lodge & Shipley 4 Way Power Rapid Traverse Lathes. It's a must-have for any metalworking professional or enthusiast looking to take their craft to the next level.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States 5GS Shear Drawings Sof-Loc Hydraulic Shear Holddown System and Pumping Unit Parts Breakdown. Pictures of the Machine Says A Thousand Words. I will search ... morefor your specific Needs Continually. Main Assembly Slide, Blade and Eccentric Parts Lists.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Untitled Document Free. Fast Shipping Every Business Day! Lodge& Shipley Answer Lathe Models 2013 and 2013-17 Operator's Manual Click for Our ... moreComplete Catalog Manual Description: Number of Pages: 28 This is a reproduction. Not a photocopy, of a Lodge& Shipley Answer Lathe Models 2013 and 2013-17 Operator's Manual. Please read contents below. We have the parts manual in our store as well. OPERATING LEVERS AND CONTROLS(FRONT VIEW)3 OPERATING LEVERS AND CONTROLS(REAR VIEW)4 INSTALLATION Foundation.5 Cleaning.5 Lifting.5 Leveling.6-7 Variable Speed Drive.7 Connecting Main Line Wires.7-8 LUBRICATION.8-9 OPERATION AND ADJUSTMENTS Controls for Starting and Stopping.10 Headstock.10-12 Carriage. Compound Rest and Apron.12 Compensating Nut Adjustment.12 Apron Feed Levers.13 Micrometer Ball Stop.13 Carriage and Compound Rest Gib Adjustment.13 Taper Attachment.14 Tailstock.14-15 Thread and Feed Mechanism.16 Standard Range of Threads and Feeds.17 Procedure to Obtain Threads per Inch.17 Procedure to Obtain Feeds Thousandths/Rev. of Spindle.19 Special Threads and Feeds.19 Metric Leads and Feeds Obtainable with Special Gears.19 English Leads Not On Index Plate.19 Limitations in Size of Special Gearing.20 TIPS TO INSURE ACCURATE WORK.21 SPARE PARTS KIT. FOR VARIABLE SPEED DRIVE.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Optimizer II. Preventive Maintenance and Procedures. Hydraulics Diagrams. It may not have the original color cover as it is a Digitally Enhanced Quality ... moreBound Copy. I’ve read Parts of these Programming and Operations Manuals.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This is a great manual if you own this lathe. I have collected this information for many years and have found the information they contain to be priceless ... morein using and setting up the machines properly.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. SPINDLE SPEEDS. (27) 9 TO 500 RPM. THREAD ENGLISH. (66) 2 TO 120 TPI. May inspect under power. 20 HORSEPOWER. SWING OVER CROSS ... moreSLIDE. 14".
Buy It Now
Free Shipping Condition: New Location: Nixa, United States This manual contains information on lifting and installing these lathes. I have collected this information for many years and have found the information ... morethey contain to be priceless in using and setting up the machines properly.
Buy It Now
Condition: Used Location: Milwaukee, United States Capacity (Mild Steel) 12 Gauge. Back Gauge Range 0 - 24”. Front Operated Manual Back Gauge with Readout. Strokes Per Minute 120. Interlocked Steel Construction. ... moreMain Drive Motor 1.5 HP 230/460/3/60. Approximate Overall Weight 65” L X 50”W X 71” H.
Buy It Now
$4.99 Shipping Condition: Used Location: United States Used Manual - Dusty Dirty Stinky, may have tattered or loose pages and ink; Happy to answer any questions,
|
|
|
|
Lodge Shipley with a Three and Four Jaw Chuck And Steady Rest
Bought few years ago never got around to putting it to work. Comes with everything shown. Motor hp shows 7 1/2 cont 220/440. $200 paid by paypal balance paid on pickup within 7 days. Also selling Blockmaster 85B $2800 Van Norman Surface Grinder $2000. LaBlond Lathe $4500. Also a 52inch Sheer cuts 1/2 in Steel, and 48inch Tauring 3 roll plate bending machine Or make me an offer for all of it.
|
|
|
Engine Lathe Geared Head 20" x 54" Lodge & Shipley Model AVS2013 (1965)
20" x 54" Lodge& Shipley Model AVS2013 Geared Head Engine Lathe(1965) Specifications Swing over bed ways: 20.5" Swing over cross slide: 13.5" Distance between centers: 54" Spindle speeds: 0- 1500 RPM, Spindle headstock gear ranges: 3, Equipped With: Taper Attachment. Hardened and ground bed ways, and apron control, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
17" x 30" Lodge & Shipley Geared Head Engine Lathe, Great Older Machine
17" x 30" Lodge& Shipley Geared Head Engine Lathe Machine Specs: Swing Over Bed 17" Swing Over Cross 9" Center Distance 30" Spindle Bore 1-3/4" Mount L-1. Speeds 18- 540 RPM. HP 5 HP 220 Volt 3 Phase. Threads 2- 128 TPI. Feeds.040- 0014. Tailstock Taper 4 MT Tailstock Travel 5-1/2" Weight 4000 LBS Approx. Equipped With: 10" Union 3 Jaw Chuck. 12" Cushman 4 Jaw Chuck. 16" Face Plate. Thread Dial. Great Older Machine Inspect Under Power in Our Branchburg NJ Warehouse Questions Call Dave@ 908-399-8133
|
|
|
Engine Lathe 20" x 198" Lodge & Shipley Model 2013 Powerturn
20" x 198" Lodge& Shipley Model 2013 Powerturn Engine Lathe Specifications Swing Over Bed: 20.5" Max Swing Over Cross Slide: 13.5" Distance Between Centers: 198" Spindle Speeds: 2000 RPM, Spindle Bore: 2" Equipped With: 3) Jaw Chuck. Tailstock, Quick Change Tool Post, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
32" x 252/120" LODGE & SHIPLEY 3220W HOLLOW-SPINDLE ENGINE/BORING LATHE - #26925
QUOTE#26925. 32" x 252/120" 21'10' LODGE& SHIPLEY"SUPERTURN 3220W" DUAL-SIDE HOLLOW-SPINDLE ENGINE/BORING LATHE New 1970. Serial No 48270, Model 3220, Series"SUPERTURN" EQUIPPED WITH: Sony Digital Readouts Left Hand Side Lathe Bed With 10' Center Distance Right Hand Side Lathe Bed With 21' Center Distance Tailstock On Right Hand Side(2) 24" Cushman 4-Jaw Independent Chucks w/12-5/8" Bore- 20" A1 Spindle Nose(2) Carriages On Right Hand Side Of Bed(1) Regular Lathe Carriage And One Boring Carriage(1) Regular Lathe Carriage On Left Hand Side Of Bed(2) Steady Rests- 2) 4-Way Tool Posts Hard Ways- Power Rapid Traverse Percentage Load Meter CATALOGUE SPECIFICATIONS: Hole Thru Spindle. 12.5" Swing Over Bed Ways. Rated. 32" Swing Over Bed Ways. Actual. 32.5" Swing Over ... moreCross-Slide. 23" Distance Between Centers. 252" Distance Between Centers. 120" Spindle Speeds. Range. 5 to 600 RPM. 55) Carriage Longitudinal Feeds. 0025 to.160 IPR. 55) Thread Changes. Range. 1 to 64 TPI. Main Motor. Horsepower. 40 HP. NOTE: This Machine Appears To Be In Very Good Condition As Taken From Service At Major Jet Engine Company Here In Cincinnati. This Lathe Has The!NEW PAGE- Added Advantage Of Being Able To Bore A Thru Hole In Solid Shafts While Maintaining Jet Engine Accuracies. This Machine Will Basically Handle Both The Inside And Outside Of A Job On One Machine With One Set-Up. PRICE: F.O.B. OUR WAREHOUSE. $249.500.00. ALL MACHINES/EQUIPMENT SUBJECT PRIOR SELL.
|
|
|
Lodge & Shipley 23"X144" Geared Head Engine Lathe Chucks, Taper, Steady Tooling
Used Lodge And Shipley 23"X144" geared head metal lathe with L2 spindle taper loaded with tooling. This lathe has spindle speeds 9-500 rpm and threading 1-160tpi. Includes full chip pan. Thread dial, 4 postion toolholder& misc. holders, wrenches, a 10" 3 jaw chuck, 18" 4 jaw chuck, two live centers small and large, taper attachment, headstock center, light, and 3ea steady rests; 8" factory, plus 9" 17" fabricated, and boring bar holder. It has less than 1/8 turn backlash in the crossfeed and compound. It is powered by a 15HP 3 phase motor and is currently wired for 480volt. The box ways have no detectable ridges but has some dinges and scratches. The bore is 2 3/4" It runs fine, all functions work as they should. This lathe weighs about 10000 lbs. It has v-belts and clutch. A couple of hand wheels ... morehave been repaired. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
|
|
|
Long bed lodge and shipley lathe 20 x 180
I got this lathe 10 years ago and has worked well for us but I now have a bigger one so it is time to let someone else have it. The lathe is a mid 70's Lodge and shipley 20 by 180 with a 2 inch spindle hole. 21 to 1750 rpm, 15 hp, 4 to 256.5 tpi, rapid on carriage NO TAPOR, 1 18 inch 4 jaw and 1 18 inch 3 jaw, 2 steady rests. The lathe does not come with the tool post or live center even though thay are in the pics. The 2nd steady is on the floor in the pic of the carriage. The BAD about this lathe is the wear on the hardways for 24 inchs right next to the headstock end, it is about.005 deep. It has never caused any problem but it is there and I dont want the buyer to think this is a 25,000 dollar lathe, it is not but if you have long work it is a 9000 dollar lathe all day long. I never done a job in it that didnt bill out over 1k. The ... morefact is long work pays big. I will load for free but I will need notice, just dont show up and expect things to happen. I can find cheap shipping for you but I will not be a broker. Ask questions, or email me for my phone number and I will talk to you in person. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-1401403211a-0x101-
|
|
|
Lodge and Shipley Blue Chip 21 geared head engine lathe
Equipped With: 12-1/2 Hp Main Motor; Accessories 14" 3-Jaw Chuck. 18” 3 jaw chuck, 18” 4 jaw chuck, 2-24” face plates, steady rest. Taper Attachment; Live Center SN# 27319 Machine Specifications: Swing. 22" Swing Over Cross Slide/carriage. 14 3/4" Cross slide travel. 15" Distance Between Centers. 72" Spindle Speeds(12) 20 to 1000 rpm Spindle Bore. 3 5/8" Spindle Nose. D1-8 Threads(54) 2-112 TPI Metric(30) 25 to 14 mm Longitudinal Feeds(25) 0009" to.051" Cross Feeds(25) 0005" to.022" Taper In Tailstock. 5 MT Dimensions(appox) 126" l-r x 54" f-b x 60" h Weight(approx) 7.000 lbs Under power and fully useable for viewing and operation. Buyer to pay freight costs.
|
|
|
Engine Lathe 20" x 132" Standard Lodge & Shipley
20" x 132" STANDARD LODGE& SHIPLEY 1 3/4" HOLE THRU SPINDLE 18" 4 JAW STEEL CHUCK TAPER ATTACHMENT QUICK CHANGE TOOL POST 1740 RPM 440 VOLT RUNS GREAT WE WILL LOAD YOUR TRUCK FOR FREE! ANY QUESTIONS CALL GREG 330-472-9383
|
|
|
Lodge and Shipley Numeriturn IV CNC Turning Center 120" Centers Chip Conveyor
LODGE& SHIPLEY NUMERITURN IV CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MFG/R ETR OFIT 1979/2003 DATE OF R ETR OFIT 2003 SWNG OVER BED 28" SWING OVER CARRIAGE 18" DISTANCE BETWEEN CENTERS 120" X AXIS TRAVEL 15" Z AXIS TRAVEL 120" RAPID TRAVERSE RATE X AXIS 300 IPM RAPID TRAVERSE RATE Z AXIS 300 IPM SPINDLE NOSE A1-11 SPINDLE SPEEDS 25- 2000 RPM SPINDLE MOTOR 50 HP SPINDLE BORE 4.5" TURRET CAPACITY 8 POSITIONS TAILSTOCK CENTER MT#5 TAILSTOCK BODY TRAVEL 90" TAILSTOCK QUILL TRAVEL 5.6" APPROX. DIMENSIONS(W/CONVEYOR) 288" x 100" x 99" MACHINE WEIGHT(APPROX) 27.500 LBS EQUIPPED WITH: FAGOR 8040T CONVERSATIONAL CONTROL WITH 14" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 18" 3-JAW HYDRAULIC THROUGH HOLE CHUCK RIGHT SIDE DISCHARGE LIFT-UP CHIP CONVEYOR STANDARD ... moreCOOLANT SYSTEM WITH TANK& PUMP ALL AVAILABLE TURRET TOOLING& MANUALS AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. ON OUR WAREHOUSE FLOOR IN KENOSHA. WISCONSIN ZIP CODE 53144. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR PRIOR TO AUCTION END- PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING For assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and we'll be happy to help. Bu
|
|
|
Lathe, 34 x 72 c-c, Lodge & Shipley Superturn 3220, 50hp, taper, 4 jaw, 1962
For sale. Heavy duty, high rpm tool room engine lathe, Lodge and Shipley Superturn 3220. Date of mfg: Nov 1962. This machine has been owned by our company since about 2000. It was purchased primarily to support a fabrication program that never materialized. The only previous owner was a gov. sub-contractor who had it in a maintenance and repair shop that closed in the early 1980's. This machine gets little use so it's time for it to find a new home. The known problems with the machine are: the end of the spindle control lever has been broken off. The coolant pump failed and was removed and the front half of the traveling chip guard is missing. Payment will be by wire transfer or cashier's check. Due to size and weight. Shipping would have to be by a dedicated carrier. We will assist the buyer with freight and rigging quotes. Specifications: ... moreSwing over carriage: 34.5 inches Swing over cross slide 26 inches Distance between centers: 72 inches Spindle speeds: 10 to 1246 rpm Threads: 1 to 64 TPI, Feeds: 0025 to.160 inches per rev. Power 480v 3 phase Motor: 50 Hp 1760 rpm Serial number: 45203 Spindle: bore 2.375 inch. D1-11 camlock Options: 4 way rapid traverse; taper attachment. Two speed tail stock with combination live and dead center spindle with drill tang driver and powershift headstock Weight(estimated) 20.000 pounds Accessories: Cushman 32 inch four jaw chuck(322146CD11) Aloris DA toolpost and eight tool holders as follows: Aloris DA2 turning holder 2 each Aloris DA41 boring bar holder 2 inch Aloris DA13 extension tool holder Dorian D50DA-53 morse taper holder Dorian D50DA-10 knurling tool Dorian D50DA-881 O.D. threading or grooving holder Dorian D50DA-71 Cut-off blade holder Manual and wiring diagram g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146a6cdec7a-0x108-
|
|
|
Lodge & Shipley 16" X 54" Metal Engine Lathe 10" 3-Jaw & 12" 4-Jaw Chuck
This listing is for a used Lodge and Shipley metal lathe. 16" X 54" Machine No. 34946 3 Jaw Cushman Chuck 4 Jaw Cushman Chuck w/ T slot Other misc. handles and holders included This lathe was removed from a working environment. We have not tested it but everything looks complete and appears to be in working order. This is an older machine that shows wear. But looks to be fully functional. Please ask any questions we would be happy to help. Local pick up is encouraged for these larger items. We can load this on your truck or trailer. Buyer is responsible for all shipping arrangements. A pick up time will need to be scheduled. Item can be banded to a pallet if needed. Payment is due within 5 days of auctions end and pick up is expected within 2 weeks unless other arrangements have been made. Ohio residents will have to pay a 6.75% ... moresales tax. We have a 14 day money back return policy with the buyer paying the return shipping. Check out my other items! Thanks for looking.
|
|
|
Lodge & Shipley AVS 1408 swing and length 14 1/2 X54
Hello this is a good lather under power for your testing. Photos are to show the machine is in good working shape. every thing in the photos does NOT go with the sell.please read to see all that comes with.Have question call Sean 832-339-5354 buyer is responsible for shipping and handling costs.Due to the nature and size of this item flat bed truck would work for shipping. Swing over Carriage 14 1/2' Distance Between Centers 54' Toshiba G9 Variable Spindle Speed Drive Digital Spindle RPM Readout Chuck is Bison 8470-4354. 121/2' L1 type 4 jaw Machine comes with 4 jaw chuck Tapper Attachment Steady Rest Chuck Guard Internal Coolant
|
|
|
Lodge & Shipley 20"x54" Powerturn Engine/Toolroom Lathe AVS 2013 w/Vidmar Tools
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2519033 A: 0013000000CXCfg O: 0065000000SN9Q4 PA: View Photo Gallery. Request Freight Estimate. View Financing Options. Sell Your Equipment. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Lodge& Shipley 20" x 54" Powerturn Engine/Toolroom Lathe AVS 2013 w/DRO. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. ... moreThis item is located on Boeing property in Auburn. WA. Rigging charges for professional removal will apply. Please see details below. Overview: Make: Lodge& Shipley Model: AVS 2013 Type: Engine Lathe Serial No: 45733 Mfg. Year: 1964 Features/Specifications: Swing Over Carriage: 20.5" Swing Over Cross Slide: 9.5" Distance Between Centers: 54" Spindle Speeds(equipped w/AVS- variable speed drive) Low: 25-200 rpm Med: 185-550 rpm High: 500-1.500 rpm Spindle Motor: 20 HP Spindle Taper: No. 5MT Hole Thru Spindle: 2" dia. Power: 460V- 60 Hz- 3 PH Chuck: 12" diameter; 3-jaw Kennametal tool post Digipac DRO Hydraulic coolant system Work light Includes 10-drawer Stanley Vidmar tool cabinet with all tooling contents as shown(see photos) Dimensions& Weight: Overall(as shown) L 131" x W 53" x H 66" Weight: 8.500 lbs(estimated) Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Regular. Thorough maintenance performed by consignor since new Rigging& Removal: This equipment is sold"as shown" at a production facility owned by The Boeing Company in Auburn. WA. The suc
|
|
|
60" LODGE & SHIPLEY "T60" T LATHE - #27298
60" LODGE& SHIPLEY"T" LATHE#27298 Serial No. 41156. Model T60, Type A1 EQUIPPED WITH: 49" 4-Jaw Faceplate w/Cored Slots& Jaws Single Carriage w/Power Angular Feed in Any Direction Hardened And Ground Replaceable Bedway Coolant System(Built-In) CATALOGUE SPECIFICATIONS: Swing Thru Gap. 60" Swing Over Way Guards. 40" Diameter Capacity. Maximum. 48" Hole Thru Spindle. 11-1/2" 24) Spindle Speeds. Range. 6 to 338 RPM(60) Feeds. Range. 001 to.0065 IPR Carriage Travel: Left of Spindle Centerline. 30" Right of Spindle Centerline. 16-1/4" Power Angular Slide Travel. 16" Motor. Horsepower. 20 HP/1160 RPM Electrical System. 220-440/3/50 Weight. Approximately. 17,000 LBS PRICE: F.O.B. OUR WAREHOUSE. $14.500.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
|
|
 |