|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Lagrange, United States Miyano BNC-34A CNC Lathe. Miyano BNC-34A. 34mm bar capacity. spindle 5000 RPM max. Turret 6 station. Main spindle collet Brown & Sharpe 22.
Buy It Now
Condition: Used Location: Chatsworth, United States Make:Mori Seiki. 5C Collet Nose on Spindle. Swing Over Bed. Spindle in good running condition. All axis in smooth condition. This machine is located in ... moreLos Angeles county, CA. Swing Over Cross Slide.
Buy It Now
Condition: Used Location: Lagrange, United States Hwacheon HI-TECH 200A. Main spindle 8" chuck (optional 3 jaw available). 20HP main spindle. spindle 5000 RPM max. Turret 12 station.
Buy It Now
Condition: Used Location: Bridgeport, United States Model 200 LMC. Daewoo Puma CNC Lathe. X Axis Travel: 9.53". Z Axis Travel: 17.32". Catalog spec's: use as a guide. Verification subject to inspect. Weight: ... more8,800 Lbs. Chuck Size: 10" Chuck.
Buy It Now
$8.60 Shipping Condition: Used Location: Doon, United States We retired a machine, and this was the office copy so its in good condition
Buy It Now
Condition: Used Location: Detroit, United States Fanuc 18iT. IKEGAI TU-30 CNC LATHE. Chuck Size:……………. 18” Hydraulic. Number of Tool Stations:… (12) Bi-Directional. Equipped With Rapid Traverse:………… ... more480 IPM. Motor Size:…………….
Buy It Now
$149.86 Shipping Condition: Used Location: Farwell, United States It is 23" x 21" x 12" deep. It is in used condition. Help yourself to a good deal. from Antiques and Auto Parts, Collectibles, Household, and Tools. We ... morespecialize in a wide variety of antique Tractor Parts!
Buy It Now
Condition: Used Location: Cypress, United States Power capacity 60kVA. O-M CNC VERTICAL LATHE. Vertical travel of cross rail 31.5". Vertical ram travel 35.5". Rapid feed: X-axis 393". Rapid feed: Z-axis ... more393". Main motor 45/40 HP. Table speed (2 variable speed) 2.0-350 rpm.
Buy It Now
Condition: New Location: Chatsworth, United States 20" x 40"CNC ToolroomLathe. 1 full year parts warranty on the machine. Labor will be provided by your local servicing distributor. Ask for Jerad. 3.38” ... moreBar Capacity. Ø20” Swing over bedways - 40” between Centers.
Buy It Now
Condition: Used Location: Cypress, United States MORI SEIKI CNC LATHE SL-65. Spindle Speeds ---------------------------1010 RPM 3 gear ranges. Spindle Nose ------------------------------A-2-15. (With ... morea 15” or 18” chuck installed). Through Spindle Hole -------------------6.3".
Buy It Now
Condition: Used Location: Lagrange, United States Main spindle 8" chuck (optional 3 jaw available). 20HP main spindle. spindle 5000 RPM max. Machine Specifications Turret 8 station.
Buy It Now
Condition: Used Location: Stone Mountain, United States Model: SE2200LSY. Year: 2020. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC ... moreVertical Machining Centers. CNC Lathes. Y Axis Travel: 4.33″(+-) 2.16″.
Buy It Now
Condition: Used Location: United States Miyano BNC-12S CNC Lathe in working. SUB SPINDLE MOTOR: 1.5 HP. SPINDLE BORE.75". SUB SPINDLE. SPINDLE SPEED: 8,000 RPM. 3-JAW CHUCK. COLLET CHUCK. BAR ... moreCAPACITY.5".
Buy It Now
Condition: Used Location: Cypress, United States The CNC lathe is perfect for machining complex parts with high accuracy and repeatability. Don’t miss out on this incredible deal! MORI SEIKI SL-25B5 ... moreCNC LATHE. Spindle bore 3.15”. Spindle nose A-2-6.
Buy It Now
Condition: Used Location: Stone Mountain, United States 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical Machining Centers. CNC ... moreLathes. CNC Plasmas. Tsugami BO12B-III CNC Swiss Lathe w/ Bar Feeder.
Buy It Now
Condition: Used Location: Stone Mountain, United States Model: YV500ER. Year: 2018. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical ... moreMachining Centers. Mazak HQR-250MSY Twin Turret, Twin Spindle CNC Lathe w/ Chip Conveyor (2021).
Buy It Now
Condition: Used Location: Bridgeport, United States Tsugami B038T Swiss Type CNC Lathe. We will help drain to coolant and disconnect the power, etc. Feel free to inspect under power. Live tool spindle speed ... moreon Turret: 7,7990 RPM. This machine is in excellent condition.
Buy It Now
Condition: Used Location: Austin, United States Chip Conveyor. Spindle bore: 2.20″. The only way we can communicate with you is through theBuy It Now button. Revelation Machinery encourages first-hand ... moreinspection of all used machinery. This machine is being sold "AS IS, WHERE IS".
Buy It Now
Condition: Used Location: Chatsworth, United States Sub Spindle. Swing over bed. In excellent working condition and available to view under power. Includes several live tool holders in new condition, never ... moreused. Main Spindle. Spindle speed. Spindle nose.
Buy It Now
Condition: Used Location: Imlay City, United States 1-USED FUJI HM-30T1 SINGLE SPINDLE CNC LATHE WITH GANRY LOAD. UNLOAD AND MILLING. Spindle Bore. . 2.2". Spindle Speed. . 940-5,000 rpm. Spindle Motor. ... more.
Buy It Now
Condition: Used Location: Roanoke, United States 18” x 40” TRAK TRL Lathe With Constant Surface Speed. Switchable Handwheel Feeds Between Course And Fine. Digital Servo Amplifiers Custom Designed For ... moreLX3 Operation. Speed Override For The LX3. Powerfeed Routines For Smooth Cuts Along The X Or Z Axis.
Buy It Now
Condition: Used Location: Stone Mountain, United States More photos detail and video are available upon your request. Call Gregg. Scott, Mark or Steven Doosan Daewoo Puma 2000SY CNC Lathe with Live Tool and ... moreSub Spindle and Y Axis(2005) Installed in(2006) Y Axis. Sub Spindle, Live Tooling, Bar Feed, Chip Conveyor, Fanuc 18iTb CNC Specifications(Preliminary) Swing Over Bed: 23.6" Swing Over Carriage: 21.6" Distance Between Spindles: 33.8" X-Axis Travel: 9.84" Y-Axis Travel: 3.94" Z-Axis Travel: 22.8" Spindle Speeds: 5000 main/ 6000 Sub, Equipped With: Full'C' axis on both Spindles. 6" Sub-Spindle Chuck, Collet Chuck on Main Spindle Chuck, Automatic Tool Presetter, Rigid Tapping On Both Spindles/ Nice Assortment of Live Tooling, Tool Monitoring System, Box Way Construction, Turbo Systems Chip Conveyor, SMW Space Saver 2200 Barfeed, Y" Axis Traverse, Contact Us Call for more information: 773-866-9600. Ask for Gregg or Scott Click for video:
Buy It Now
Condition: Used Location: Louisville, United States LEADWELL T-8 CNC Slant Bed Lathe. Spindle Nose: A2-8. Spindle Speed: 3,500 rpm. Sub Spindle: no. Chuck Size: 12". Z AXIS - 25'. Main Motor: 25 hp. Turret ... moreCapacity: 12.
Buy It Now
Condition: Used Location: Huntington, United States YCM TC-26 CNC TURNING CENTER W/ LNS SERVO S3 BARFEED. - LNS SERVO S3 BARFEED. SWING OVER BED. . 19.68". SWING OVER CARRIAGE. 13.77". SHANK HEIGHT FOR ... moreSQUARE TOOL.
Buy It Now
Condition: Used Location: Chatsworth, United States 2005 GANESH 5212-TM Turn/Mill Center. Universal “Driven-Tool” CNC lathe with Chuck, shaft & bar machining capabilities. Good working condition and available ... moreto view. PRECISION Live-Tooled CNC LATHE. Parts Catcher.
Buy It Now
Condition: Used Location: Stone Mountain, United States Model: Quest TwinTurn 65. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. CNC Vertical ... moreMachining Centers. CNC Lathes. CNC Plasmas.
Buy It Now
Condition: Used Location: Roanoke, United States UsedSOUTHWESTERN INDUSTRIES Model 1745P. 17” x 45” Trak TRL Lathe, 7.5 Hp, 230/460-Volt, 3-Phase. Distance Between Centers 45”. Automatic Cutter Compensation ... moreIs Easy And Applies To Manual As Well As CNC Work.
Buy It Now
Condition: Used Location: Louisville, United States Manufacturer: Tsugami. 2006 Tsugami BU-26SY CNC Swiss Gang Slide/Turret Lathe. The Tsugami BU26Y (1" capacity) is a benchmark that sets the rules for. ... moreType: Swiss Screw Machines (CNC). An 8-station turret (3-axis), plus an independent gang tool slide with.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Lathe Chuck 6Jaw 6-jaw Self-Centering Chuck 100mm 125mm 160mm 200mm 250mm CNC Package Included : 1 x 6 Jaw Lathe Chuck 1 x Wrech 3 x Screw.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Package Included : 1 x 6" 4 Jaw Lathe Chuck 1 x Wrench 3 x Screws 4 x Jaw.
Buy It Now
Condition: Used Location: Stone Mountain, United States Model: Techno Wasino G07. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Tsugami ... moreBO12B-III CNC Swiss Lathe w/ Bar Feeder. CNC Vertical Machining Centers.
Buy It Now
Condition: Used Location: United States Samsung SL-20E CNC Lathe in excellent. CHIP CONVEYOR. MAX TURNING LENGTH: 20.47". EQUIPPED WITH MACHINE WEIGHT: 8,600 LBS. TURRET POSITIONS: 10. MAIN ... moreMOTOR: 25 HP. SPINDLE NOSE: A2-8.
Buy It Now
Condition: Used Location: Cincinnati, United States 2-AXIS COMBINATION MANUAL/CNC LATHE. 15.75/23" x 50" HARRISON "ALPHA 400" GAP- TYPE. Serial No A30424, Model 400, Series Alpha. Swing Over Bed 15.75" ... more400 MM. Swing In Gap 23" 585 MM. Distance Between Centers 50" 1250 MM.
Buy It Now
Condition: Used Location: Cincinnati, United States Quote #28581. 17.5" x 40" NARDINI "FAST TRACE" CNC LATHE Serial No D4JEO-105, Type Fast Trace. 10" 3-Jaw Chuck w/Jaws. Overall Height.. 68". Spindle Motor, ... moreHorsepower.. 8 HP.
Buy It Now
Condition: Used Location: Cincinnati, United States 15.75/23" x 50" HARRISON/600GROUP "ALPHA 400 PLUS" #29542. GAP-TYPE 2-AXIS COMBINATION MANUAL/CNC LATHE. Serial No A30548/0420, MODEL 400 Plus, Series ... moreAlpha. Removeable Gap. Swing In Gap 23" 585 MM. Gap Width From Faceplate 6.5" 165 MM.
Buy It Now
Condition: Used Location: Cincinnati, United States 15.75/23" x 50" HARRISON "ALPHA 400 PLUS" GAP-TYPE #29663. 2-AXIS COMBINATION MANUAL/CNC LATHE. New 2000, Serial No S30106, MODEL 400S Plus, Series Alpha. ... moreSwing In Gap 23" 585 MM. Gap Width From Faceplate 6.5" 165 MM.
Buy It Now
Condition: Used Location: Cincinnati, United States 2-AXIS COMBINATION MANUAL/CNC LATHE - #30249. 18/28.7" x 40" HARRISON "ALPHA 460 PLUS" GAP-TYPE. Serial No A40201, Model 460 PLUS. Series Alpha. Swing ... moreIn Gap.. 28.75" 730MM. Gap Width From Faceplate. 8.5" 216MM.
Buy It Now
Condition: Used Location: Lincolnshire, United States Wasino Robo.1 Robotic Pick & Place. Pallet Loader with (6) Pallets. GANTRY LOADER SPECIFICATIONS Z-Axis Travels - Carriage Travel..11.22".24"L x 12"W ... morex 24"H.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China CNC Lathe Chuck 3Jaw 4Jaw 6Jaw Self-Centering/Independent Plain Back Metal Chuck for Lathe Mill Machine 1, 3 Jaw Self-Centering Lathe Chuck Features and ... moreDetails : Speed : 2400~4800rpm 3-Jaw Self-centering Scroll Lathe Chuck 80MM, 100MM, 125MM, 160MM, 200MM , 250MM , 320MM Diameter Plain back mounting , offer M6/M8/M10/M12/M16 Screw High quality steel, hardened and ground TOP QUALITY Hardened Steel , applicable for CNC drilling milling machine level of protection : IP65 Package Included : 1 x lathe chuck 1 x wrech 1 x extra jaws and screws.
Buy It Now
$20.49 Shipping Condition: Used Location: Lapeer, United States January 1994 edition. Also includes installation instruction & extended storage manual. This item brought to you by Ozzy's Treasures, LLC.
Buy It Now
Condition: Used Location: Houston, United States JOHNFORD HT-100E-2D CNC OIL COUNTRY TURNING CENTER LATHE. Make: JOHNFORD. CNC LATHE / TURNING CENTERS. CNC Machines. New & Used CNC. CNC MILLING MACHINES. ... moreCNC TURRET PUNCH. Talk to one of our Machinery experts to get a price quote and more information.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Lathe Chuck 3Jaw 4Jaw 6Jaw Self-Centering Metal Lathe Clamping Chuck 80-250mm for CNC Metal Lather Center Package Included : 1 x Lathe Chuck This listing ... moreincluded 3-jaw , 4-jaw and 6-jaw lathe chuck with optional diameter , please choose the correct model you need . 3 Jaw Lathe Chuck Features and Details : Model：3 jaw Self Centering Scroll Lathe Chucks material：TOP QUALITY Hardened Steel Products Standard：international standard level of protection：IP65.
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States (Model: NP32. Model #: NP32. Tsugami CNC Lathe. Manufacturer: TSUGAMI. Serial Number: 7193. Date: UNKNOWN. NOTE . 5) Like New Condition.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 3Jaw 4Jaw 6Jaw Lathe Chuck Self-Centering Hardened Plain Back with Extra Jaw CNC 80MM 100MM 125MM 130MM 160MM 200MM 250MM This listing included the 3Jaw, ... more4Jaw , 6Jaw Lathe Chuck with Self-Centering , Please choose the correct type you need , any questions , please feel free to contact us . Please check below details for each type : 1, 3 Jaw Self-Centering Lathe Chuck Features and Details : Speed : 2400~4800rpm 3-Jaw Self-centering Scroll Lathe Chuck 80MM, 100MM, 125MM, 160MM, 200MM , 250MM , 320MM Diameter Plain back mounting , offer M6/M8/M10/M12/M16 Screw High quality steel, hardened and ground TOP QUALITY Hardened Steel , applicable for CNC drilling milling machine level of protection : IP65 Package Included : 1 x 3Jaw lathe chuck 1 x wrech 3 x screw 3 x jaw.
Buy It Now
$54.07 Shipping Condition: Used Location: Lagrange, United States Part number 6M38 0080. from Miyano BND-20S. Not responsible for wrong fit. Excellent condition! Ball nut is tight. No bearing noise. See video above of ... moreball screw moving in Z axis. Ball Screw (Z) axis.
Buy It Now
Free Shipping Condition: Used Location: Oxnard, United States
Buy It Now
Free Shipping Condition: Used Location: Valencia, United States NAKAMURA SLANT 1 FANUC 11TA PALLET 092323. is a machine tool and parts dealer located in Southern California. These parts have been dismantled by our ... moreown employees from machines at our facility. cp 09-23-23 CP bob.
Buy It Now
Condition: Used Location: Lagrange, United States Iemca Boss 542 CNC / 37, Part catcher, part conveyor, chip conveyor. Work Holding Collet. Weight 10803. Live Tool RPM 3,000 RPM. Live Tool Motor Power ... more5 hp. of Live Tool Positions 6. Collet Size 42. Chuck Size 6.
Buy It Now
$19.02 Shipping Condition: Used Location: Olathe, United States Toyoda GT52 CNC Lathe W/ Fanuc 15TA Parameters List For Questions Call John 314-398-7414 There Is A $15.00 Handling Fee That Will Be Added To All International ... moreSales. ALL ITEMS ARE SOLD AS IS. WHERE IS Stock#6834-N
Buy It Now
Condition: Used Location: Lincolnshire, United States SR Evolution Model Variation - Variation 2. Front Off-Center Drilling. - Variation 3. Main/Sub Spidle Rigid Tapping. - Variation 4.Main-Sub Spinlde Simultaneous ... moreDrilling.
Buy It Now
Condition: Used Location: Milwaukee, United States Sidehead - Square turret. Extra High Column Loaded with Tooling + 4 Axis Side Head. Rapid traverse (all 4 axes) - 120- IPM. Table Size - 60" Combination ... moreTable. Table speeds - 3 - 68 RPM + 12 - 272 RPM.
Buy It Now
$30.27 Shipping Condition: Used Location: Lagrange, United States Removed from a functioning Okuma Howa ACT 3 machine, which was scrapped. See picture of running machine display prior to dismantle. Machine components, ... moredisplay or panel not included.
Buy It Now
Condition: Used Location: Harrison, United States 0.75" Dia. Fanuc 31iA. Tsugami BE-20V CNC Swiss Lathe. EDGE Minuteman 320 Magazine Bar Loader. Max Rotary Tool Drilling Diam. 6mm (opt). Max Rotary Tool ... moreTapping Diam. M5 x 0.8. Tool Size. 12 x 12 x 85mm.
Buy It Now
Condition: Used Location: Harrison, United States UPPER AXES TRAVEL, X/Z/B2. 8.16"/11.81"/34.4". LOWER AXES TRAVEL, X/Z. 8.16"/31.49". - (1) 12 POSITION LOWER TURRET W/ LIVE MILLING (ALL STATIONS LIVE). ... more- (2)12 POSITION UPPER TURRETS W/ Y-AXIS (ALL STATIONS LIVE).
Buy It Now
Condition: Used Location: Harrison, United States WASINO A-12 CNC LATHE w/ROBOT LOADER. ROBOT LOADER SYSTEM. SPINDLE NOSE / SPINDLE BORE A2-6/ 2.12". - S-ROBO1 GANTRY LOADER. TURRET CAPACITY (ALL LIVE ... moreCAPABLE) 12 STATIONS. MACHINE WEIGHT (APPROX) 5500LBS.
Buy It Now
Condition: Used Location: Loveland, United States Complete Machinery Sales in Loveland, Ohio has this 2002 Hwacheon Hi Tech 700MC-15 CNC Lathe with Live Tooling for sale. The machine is in good condition ... moreand may be inspected under power. 2006 Hwacheon Hi Tech 700MC-15 CNC Lathe with Live Tooling.
Buy It Now
Condition: Used Location: Cypress, United States Chuck: 10″ 3 jaw Hydraulic. Spindle Speeds 20 – 3150 RPM. Spindle Nose/Bore A2-8 / 3.03″. Spindle Motor 20 HP. Cutting Length Max.: 30.3″. Electrics 220 ... moreVolt / 3 Phase / 60 Cycle. Turret 12 Position. Machine Weight (approximate): 12,500 lbs.
Buy It Now
Condition: Used Location: Harrison, United States Yama Seiki GA-2000 CNC TURNING CENTER. 2.76". BAR CAPACITY. . OF TOOL STATIONS. 12. CHIP CONVEYOR. PARTS CATCHER ARM (Missing Basket). 8" 3-JAW HYDRAULIC ... moreCHUCK. TURRET HEAD TYPE.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Package Included : 1 x 4Jaw 6" independent lathe chuck 1 x wrech 4 x M10 screw Features : Speed : 3800rpm 4-Jaw Lathe Chuck 6" (160 mm) diameter Each ... morejaw is independently, adjustable and reversible Plain back mounting High quality steel, hardened and ground .
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1 x 6 Jaw 8" Lathe Chuck Step Jaws. CNC Spindle Motor & Tool Parts. Linear Guide Rail. CNC Tool Accessories. CNC Repair Parts. Stepper Motor & Driver. ... moreServo Motor & Driver. rail, 3D printer parts, etc.
|
|
|
|
WASINO SL-104D CNC TURRET LATHE / TURNING CENTER FANUC O-TT, 0-TT
WASINO CNC TURRET LAT HE MODEL: SL-104D S/N: 672 MAX DIAMETER: 17" BETWEEN CENTERS: 12" THROU GH HOLE: 1.75" TWO TURRETS SIX POSITIONS EACH MAX RPM: 6000 FANUC 0-TT CONTROL BAR FEEDER NO TOOLING Y EAR: 1990 Please call(256) 536-7871 from 7:30am to 4:00pm Central Mon-Friday. We do not arrange shipping but will load anything we sell onto your truck or trailer. We do offer a 30 day return policy and are members of MDNA. We do reserve the right to cancel the auction at any time in the event of local sale. Payment is required within 5 business days from end of auction. Buyer is responsible for all shipping costs and arrangements. We will load on a flatbed trailer unless otherwise noted. Please contact us with further shipping and payment questions. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Star RNC-16 Swiss Type CNC Lathe w/ FMB Bar Feed. Cap-16mm w/ Fanuc OT Control
Star RNC 16 Specification Description Control, Fanuc OT, Spindle HP, 3 Hp, RPM, 300 to 8.000, Bar Cap, 16mm- 5/8" Machine Size, 72" 84" 48" Machine Weight, 2.500 lbs, Equipped With: FMB Mini turbo magazine barfeed- This is one of 5 machines for sale. All are at the same price. Have Fanuc OT Controls, Model-RNC-16, and come with FMB Bar Feeds. Machines range from 1988- 1993 in year. NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. Need help with Questions on shipping or assistance with this machines specifications? ... moreFeel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
|
|
|
1997 Miyano BNC-34C3 CNC Lathe Fanuc 21t control
Miyano BNC 34C3, Runs Very Good! Questions Call Steve@ 866-803-5202. Shipping Quote Contact Control: Fanuc 21T. Bar Capacity 1.312" Chuck Work 3" dia. Max Work Length Bar Work 5.9" Chuck Work 3.15" Spindle Speeds 200-6000rpm, Turreet 8station,
|
|
|
Nardini Fast Trace, CNC Engine Lathe, w/ Fanuc 20T CNC Control w/ Teach-In
Now available for your inspection and purchase at our Warehouse in Beautiful Downtown Miamisburg. Ohio is this Beautiful Nardini Fast Trace. CNC Engine Lathe, S/N D5JFM173, Manufactured New in 1996 w/ Teach-In Feature. We just purchased it yesterday from one the cleanest Tool and Die shops we have ever seen. Specifications are as follows: CNC Controller: Fanuc 20T Capacity: Distance Bewteen Centers 40" Dustance Between Chuck& Tailstock 33" Max Turning Length w/ Quick Change Turret 31" Swing Over Bed 17" Swing Over Wings of Saddle 15 3/4" Cross Slide Travel 11 3/4" Tool Section 3/4" x 3/4" Bed: Width 10 1/2" Height 12 1/2" Headstock: Spindle Nose D-1 Camlock Spindle Bore 2" Spindle Speed Range 37. 5- 3.000 RPM Tail Stock: Quill Diameter 2 3/8" Quill Travel 8 1/2" Tailstock ... more8" Manual Chuck Coolant System Dimensions: 89 1/2" x 54 1/2" x 72" Weight: 4.410 Lbs If you buy this machine we know you'll be very happy with it. The photos were taken as we bought it. We didn't even have to wipe it off. That's the way this Tool and Doe shop keeps their Machine Tools. We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in. Is the way it will be when we ship it. We will load. Free of charge. You always buy with confidence at Machine Tools of America. First of all. Our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly. We offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be. Send it back to us and we’ll refund what you paid us. Every item we sell. Unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse(515 Kercher St. Miamisburg, OH 45342) We request that the successful buyer con
|
|
|
CNC LATHE - HWACHEON Hi-TECH 300LMC, Live Tooling, Fanuc, Excellent Condition!
HWACHEON HI-TECH 300LMC LIVE TOOL LONG BED CNC TURNING CENTER BUILT: 9-2005/ Installed in 2006 SPECIFICATIONS: CHUCK SIZE 12” MAXIMUM SWING 23.62” MAXIMUM CUTING DIAMETER 14.9” MAXIMUM MACHINING LENGTH 48” Long Bed Version) BAR CAPACITY 3.1” X-AXIS TRAVEL 11” Z-AXIS TRAVEL 50” SPINDLE MOTOR 30 HP SPINDLE SPEED 25– 3200 RPM(2 SPEED GEAR BOX) SPINDLE NOSE/ SPINDLE BORE A2-8 TOOL TURRET TYPE 12-POSITION TURRET MILLING SPINDLE on TURRET 5HP/ 3000 RPM STANDARD CUTTING TOOL 1” BORING BAR SIZE 2” RAPID TRAVERSE 708 I PM TAILSTOCK QUILL STROKE 4.72” TAPER OF TAILSTOCK QUILL MT#5 DIMENSIONS(w/o chip conveyor) 157” x 74” x 84” High WEIGHT 23.000 LBS. EQUIPPED WITH: FANUC 18i-TB with COLOR LCD DISPLAY· FULL C AXIS/ LIVE TOOL MACHINE· AUTOMATIC TOOL SETTER· 12” 3 JAW HYDRAULIC CHUCK(HOWA BRAND) PROGRAMMABLE TAILSTOCK BODY& QUILL· ... more12-POSITION TURRET/ 6 of 12 STATIONS ARE LIVE/ 8 STD BORING BAR HOLDERS· TURBO LIFT UP CHIP CONVEYOR/ COOLANT SYSTEM· HWACHEON MANUALS INCLUDED· 4 RADIAL LIVE TOOL HOLDERS INCLUDED· HEAVY DUTY BOX WAY CONSTRUCTION· CUSTOM STEADY REST w/ MANUAL OPEN& CLOSE(SEE PHOTO) PRICE: $114.900 F.O.B. FREMONT. CA(PREP& LOADING INCLUDED) TERMS: DUE IN FULL PRIOR TO SHIPMENT WARRANTY: AS IS PER BUYER INSPECTION NOTE: INSPECT UNDER POWER IN OUR FREMONT SHOWROOM VIDEOS: First is an overview of the machine running. http:www.youtube.com/watch?v=ZoRhxReMfWo&list=UU5mLJbgLTLjM6pqbj8dNPmQ&index=2 This video is of the spindle in high and low gear. http:www.youtube.com/watch?v=v4slfhGvGO4&list=UU5mLJbgLTLjM6pqbj8dNPmQ&index=1 Call or email us with any questions. We can also assist in getting a trucking quote for you. We will included machine prep and loading. Thank you for your interest. We look forward to working with you. Sincerely, PERFORMANCE MACHINE TOOLS/ Sales Team
|
|
|
WARNER & SWASEY 25C-M5060 CNC LATHE W/FANUC 21i-T CNC CONTROL
WARNER& SWASEY 25C-M5060 CNC LATHE W/FANUC 21i-T CNC CONTROL SPECIFCATIONS: Chuck Size: 12" Spindle Nose: 11" A1 Thru Hole in Spindle: 5" Bar Capacity: 4 1/2" Max Swing diameter over turret bar: 24 1/2" Max Swing diameter over turret face: 16 1/2" Longitudinal Work Area: 26 1/2" Tooling OD Cutter(qualified) 1 1/4" sq x 6" Bore in ID Holder: 3" Turret with Coolant Distributor: 12 stations Longitudinal Stroke: 12" Cross Stroke: 8 3/4" Max Motion Rate: 01 to 300 IPM Motor-Heavy Duty DC Variable Speed Standard: 50 HP Spindle Speeds: 35- 1518 RPM High Clutch Spindle Speed Range: 100-1518 RPM Low Clutch Spindle Speed Range: 35- 519 RPM Floor Space(approx) With Cabinet Doors Open: 222" x 113" Shipping weight(approx) 17.000 lbs Equiped with: Coolant Pump. Work Area Enclosure, ... more5 Plain Heads, 7 Turning Heads, Chip Conveyor, Tailstock, Work Light and a Fanc 21it cnc control. Machine was refurbished and retrofitted with Fanuc Control 21i-t. With Fanuc motors, drives and chuck in 2007 by previous owner. Gardner Denver Compressor, in Quincy, MO power on- 21.883 hrs cut time- 4.398 hrs operator time- 1.924 hrs ALL ITEMS SOLD AS IS. WHERE IS stock# 053 MACHINE IS AVAILABLE FOR INSPECTION UNDER POWER BY APPOINTMENT BUYER IS RESPONSIBLE FOR ALL SHIPPING ARRANGEMENTS AND COST. LINK TO VIEW MACHINE RUNNING:
|
|
|
Hardinge cnc lathe super slant Fanuc Gn6 control
Up for sale is this Hardinge Super Slant CNC lathe with a Fanuc GN6 control system. The machine seems to be in good condition. But the paint is bad. Machine was originally Blue, but has been poorly painted white. I does have a chip conveyor. Hydraulic chuck and manuals are included. I bought this machine to retrofit a new control on to for development. Got it to my rigger and it is to large for me to handle with the equipment I have access to. The previous owner stated that the machine powered up but needed"parameters" installed. I planned on upgrading the older Fanuc control to a newer PC based unit. My loss is you gain. Please contact me for more information and I will do my best to help you. It has been re painted at some point. Not very well done. I really do not know a whole lot more than what I have stated. I can have it loaded. ... moreAnd even arrange a shipper. Thank you
|
|
|
WARNER & SWASEY 2SC-M5060 CNC LATHE W/FANUC 21i-T CNC CONTROL
WARNER& SWASEY 2SC-M5060 CNC LATHE W/FANUC 21i-T CNC CONTROL SPECIFCATIONS: Chuck Size: 12" Spindle Nose: 11" A1 Thru Hole in Spindle: 5" Bar Capacity: 4 1/2" Max Swing diameter over turret bar: 24 1/2" Max Swing diameter over turret face: 16 1/2" Longitudinal Work Area: 26 1/2" Tooling OD Cutter(qualified) 1 1/4" sq x 6" Bore in ID Holder: 3" Turret with Coolant Distributor: 12 stations Longitudinal Stroke: 12" Cross Stroke: 8 3/4" Max Motion Rate: 01 to 300 IPM Motor-Heavy Duty DC Variable Speed Standard: 50 HP Spindle Speeds: 35- 1518 RPM High Clutch Spindle Speed Range: 100-1518 RPM Low Clutch Spindle Speed Range: 35- 519 RPM Floor Space(approx) With Cabinet Doors Open: 222" x 113" Shipping weight(approx) 17.000 lbs Equiped with: Coolant Pump. Work Area Enclosure, ... more5 Plain Heads, 7 Turning Heads, Chip Conveyor, Tailstock, Work Light and a Fanc 21it cnc control. Machine was refurbished and retrofitted with Fanuc Control 21i-t. With Fanuc motors, drives and chuck in 2007 by previous owner. Gardner Denver Compressor, in Quincy, MO power on- 21.883 hrs cut time- 4.398 hrs operator time- 1.924 hrs ALL ITEMS SOLD AS IS. WHERE IS stock# 053 MACHINE IS AVAILABLE FOR INSPECTION UNDER POWER BY APPOINTMENT BUYER IS RESPONSIBLE FOR ALL SHIPPING ARRANGEMENTS AND COST. LINK TO VIEW MACHINE RUNNING:
|
|
|
Wade CNC CNC Fanuc Lathe with 20 Colletts Very Low Hours Collet 22J Spindle
Wade CNC 1000 Lathe Excellent Condition WADE CNC-1000 LATHE This is an extremely high precision rigid lathe. Ideal for small medical, electronic, aerospace, and automotive components. It features the GE Fanuc OTC 32-bit microprocessor control, a 9-inch, high-resolution monochrome monitor and user-friendly placement of buttons on the control panels to enhance operator efficiency. Air Chuck 5 C Adapter 22J Chuck Collets from 1/2" 2/38" MACHINE FEATURES: Fanuc Control OTC Digital Bar Feed Capability Second Operation Capability Automatic Lubrication 8 Position Bi-Directional Turret Precision Ground Ways MACHINE SPECIFICATIONS: Heavy Duty Cast Iron Base Chucking Capability 30 Degree Slant Bed Center Driven Precision Spindle Programmable Air Collet Closer Precision Pre-Loaded Ball Screws WADE: MODEL CNC-1000 Maximum Turning Diameter 8" ... moreMaximum Turning Length 8" Swing Over Slide Cover 9" Swing Over Saddle 8" Rapid Traverse X/Z Axis 400 ipm Axis Repeatability.000025" Spindle Nose A 2-3" Hole Thru Spindle 1.250" Collet Capacity(5c) 1.062" 5c Step Chuck Gripping Capacity 4.000" Spindle Speeds 110-5000 Rpm Spindle Drive Motor AC 5/7V2 Hp Turret 8 Station Turret Indexing Time Station to Station.2 Second Tool Size Square 1/2" Tool Size Round 1/8- 3/4" Coolant Tank Capacity 10 gallons Machine Dimensions 49" L x 50" D Machine Height 64" H Approximate Net Weight 3000 lbs. CNC Control Fanuc OTC For More Info Please Call 1-800-888-4312
|
|
|
2003 HARDINGE TALENT 6/45 CNC LATHE - FANUC OiTB
HARDINGE TALENT 6/45 CNC LATHE- FANUC OiTB YEAR: 2003/ GOOD CONDITION SPECIFICATIONS SPINDLE CHUCK-READY SPINDLE CONFIGURATION(ANSI) A2-5 DRAW TUBE TYPE: HYDRAULIC THROUGH DRAW TUBE CAPACITY: 1.77” JAW CHUCK SIZE(MAX) 6.65” NO CHUCK WITH MACHINE) GRIPPING CAPACITY) 5.31” MACHINING DIAMETER(MAX) 11.10” TURNING LENGTH(MAX) 15.00” HANG WEIGHT WITH DEVICE AND PART: 75 LBS SPINDLE CENTERLINE HEIGHT: 39.40” OPERATIONS REACH TO SPINDLE: 11” AC DIGITAL SPINDLE DRIVE SYSTEM CONTROL: FANUC OiTB PEAK HORSEPOWER RATING: 15 HP TORQUE RATING: 84.5 FT-LB BASE SPEED: 750 RPM MAX. SPEED(1-RPM STEPS) 6.000 RPM CARRIAGE AND CROSS SLIDE SWING DIA. OVER WAY COVER(MAX) 18.00” TRAVEL. X-AXIS(MAX) 9.00” TRAVEL. Z-AXIS(MAX) 16.00” TRAVERSE RATES. X AND Z AXES(MAX) 1,181 IPM Z-AXIS THRUST(MAX) 4.026 LBS BALL SCREW DIAMETER(X AND Z AXES) 1.102” TURRET(BIDIRECTIONAL) ... moreTYPE: VDI 30 NUMBER OF STATIONS: 12 SQUARE SHANK TOOL SIZE(MAX) 3/4" ROUND SHANK TOOL SIZE(MAX) 1-1/4” INDEX TIME(ADJACENT STATION) 0.78 SECOND COOLANT COOLANT TANK CAPACITY: 33 GALLON COOLANT PRESSURE(STANDARD) 40 PSI GENERAL WEIGHT(APPROX) 5.940 LBS. DIMENSIONS: 78.66” X 64.96” X 68.94” ELECTRICS: 220 VOLTS. 3 PH, 60 CYC EQUIPPED WITH FANUC OiTB CONTROL COOLANT CHIP CONVEYOR NO TAILSTOCK HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
DAEWOO PUMA 8 CNC LATHE - FANUC CONTROL - 8" CHUCK
DAEWOO PUMA 8 CNC TURNING CENTER PUMA 8- NEW 1990 MAXIMUM SWING OVER BED- 17.72" SWING OVER CARRIAGE- 9.84" MAXIMUM CUTTING DIAMETER- 8.2" MAXIMUM CUTTING LENGTH- 14" SPINDLE NOSE- A2-6 SPINDLE BORE- 2.2" BAR CAPACITY- 1.77" MAXIMUM CROSS TRAVEL- X-AXIS) 4.9" MAXIMUM LONG. TRAVEL- Z-AXIS) 15" SPINDLE SPEEDS- 40 TO 4.000 RPM X-AXIS RAPID TRAVERSE- 236 IPM Z-AXIS RAPID TRAVERSE- 472 IPM NUMBER OF TOOL POSITIONS- 12( 6 ID& 6 OD) SPINDLE DRIVE- 15/20 HP APPROXIMATE MACHINE WEIGHT- 8.820 LBS APPROXIMATE MACHINE DIMENSIONS- 124"LR) X 76"FB) X 72"H) EQUIPPED WITH- FANUC OT CNC CONTROL 8" 3 JAW HYDRAULIC CHUCK HYDRAULIC TAILSTOCK COOLANT SYSTEM MISCELLANEOUS TURRET TOOLING 12 POSITION TURRET HIMES MACHINERY PHONE- 888) 803-2496 WEBSITE- www.HimesMachinery.com FINANCING AVAILABLE- CLICK ... moreLINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
1996 Femco WT-50 CNC Lathe 22" Cutting Dia. 15" Chuck &Fanuc 0T control VIDEO
BRAND Femco Controller FANUC 0T CNC CONTROL Spindle Speed Max. 2500 rpm Model WT-50 Axis 2 Type Turning Centers YEAR 1996 FANUC 0T CNC CONTROL. Max. 2500 rpm, WT-50, Turning Centers Chuck Size 15" Max Swing Over Bed 24.4" Max Turning Diameter 22.83" Tools 8 Spindle Speed 2500 RPM Spindle Nose A2-8 Spindle Motor 40/ 30 HP AC Rapid Traverse Rates(X/ Z) 236/ 472 IPM X-Axis Travel 11.31" Z-Axis Travel 29.13" Machine Dimensions(L x W x H) 139" x 83" x 81" Machine Weight 16.292 lbs. FANUC 0T CNC CONTROL 9" Monochrome CRT Inch/ Metric Conversion 15" Hydraulic Chuck with Soft Jaws Jorgensen Chip Conveyor Chucker(No Tailstock) Slant Bed Box Way Construction If you have any questions please contact us at 866-803-5202 or 714-892-9800 If you need a shipping quote please contact Tim at Abba Freight 866-779-9350 ... moreor tims@abbafreight.net
|
|
|
Mori-Seiki LL-7 CNC Numeric Control Lathe w/ Fanuc Control / 43" Swing x 98" Bed
MORI-SEIKI LL-7 CNC LATHE 43” SWING X 98” BETWEEN CENTERS W/ FANUC SERIES O-T CONTROL Description: Up for sale is a Mori Seiki LL-7 CNC Lathe. This lathe is in perfect running and operating condition. It features a 43” swing over the bed. 20” swing over the cross slide, 98” between centers, a 4.1” spindle hole, and a spindle speed range of 8-750rpm. It is powered by a 50HP motor, and has twin turrets(front& rear) with four stations; totaling 8 combined stations total. Along with the lathe is a hydraulic tailstock, 24” diameter 4-Jaw chuck, 40” diameter 8-Jaw chuck, chip conveyor, and has been retrofitted with a GE Fanuc O-T series control. To see this machine under power see the video below. Or give us a call to schedule an appointment to see the machine in person in Milpitas. CA. SPECIFICATIONS MANUFACTURER MORI-SEIKI MODEL LL-7 SERIAL ... more84 FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or do
|
|
|
Daewoo Lynx 220A CNC Turning Center Lathe Fanuc control
Daewoo Lynx 220A CNC Turning Center New 2005 LOW HOURS General Specifications As Per Brochure CNC Control: Fanuc OiT A Swing Over Bed: 20.1" Swing Over Carriage: 11.4" Travel: X-Axis: 6.9" Z-Axis: 13.0" Rapid Traverse: 1.4 IPM Max. Bar Capacity: 1.75" Max. Turning Diameter: 12.7" Spindle: Speeds: 60- 6000 RPM Motor: 15 HP Bore: 2.08" Draw Tube Bore: 1.81" Turret Stations: 12 Weight(Approx. 7190 Lbs. Equipped with(must be verified by buyer) 6" 3-jaw chuck Tool presetter Tailstock Oil skimmer Coolant System Parts Catcher 3 ID Tool blocks Hours: Power on: 9.759 Operating: 3.852 Please contact Brandon for more details or if you would like to schedule an inspection today! 303-651-6545/
|
|
|
MORI SEIKI SL0 SLANT TURN CNC LATHE TURNING CENTER FANUC CONTROL
NO RESERVE! SUPER NICE CONDITION! HARD TO FIND. 1986 SL-0 MORI SEIKI CNC LATHE, 6" POWER CHUCK, 8-TOOL TURRET WITH HOLDERS, FANUC CONTROL. THIS MACHINE IS COMING FROM A ONE OWNER PLANT, VERY WELL MAINTANED WAS IN SERVICE AS OF LAST WEEK! HARD TO FIND THIS MODEL IN NICE SHAPE, VERY ROBUST SUPER PRECISION MACHINE WITH TINY FOOTPRINT. EMAIL ANY QUESTIONS. WE WILL LOAD ON YOUR TRUCK OR HELP ARRANGE THE LOWEST POSSIBLE FLATBED SHIPPING METHODS. THANK YOU, MICRO MACHINE CO.
|
|
|
Kia Turn 15 CNC Lathe, 1995, Fanuc OT CNC, Under Power
Please see info below and photos on a very nice Kia Turn 15 CNC Lathe. It is under power in Cincinnati. OH and is available to show to you immediately. This machine will make someone an excellent machine. This machine is available immediately. I do have the ability to load this machine on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. Please feel free to call anytime. KIA TURN 15 CNC TURNING CENTER Model Kia Turn 15. New 1995, S/N 15394 EQUIPPED WITH: Fanuc 0T CNC Control. RS232 Port, Tool Presetter, Partial Parts Catcher, Collet Chuck. 12 Position ID/OD Tool Turret, Tailstock, Heavy Duty Slant Bed Construction. Chip Conveyor and Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Slant Bed. 21.65" ... moreMax Swing Over Carriage. 12" Max Distance Between Centers. 19.68" Cross Travel(X-Axis) 6.25" Longitudinal Travel(Z-Axis) 14.98" Rapid Traverse Rate. 1417 IPM Number of Turrets. 1 Turret Positions. 12 Spindle Bore. 1.89" Bar Capacity. 1.5" Spindle Speed Range. 100-5000 RPM Spindle Drive Motor. 15 HP Electrics. 220/3/60 Approximate Machine Dimensions(Without Chip Conveyor) 84" x 72" Approximate Machine Height. 78" Approximate Machine Weight. 9000 LBS CONDITION: Machine Appears to be in Excellent Condition!
|
|
|
Used Ex-Cello Fanuc CNC 3 Spindle Auto Lathe 6-Tool Screw Machine
Used Ex-Cello Fanuc CNC 3 Spindle Auto Lathe 6-Tool Screw Machine USED. IN NICE CONDITION. INCLUDES FANUC MANUAL. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 717-517-6516. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 3 Spindle THE UNIT WEIGHS APPROX. 12000 LBS. OVERALL FOOTPRINT: WIDTH: 7' LENGTH: 12' HEIGHT: 9' OTHER DETAILS: THIS ITEM IS LOCATED IN WINDSOR. CT 06095 SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE ... morePLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL
|
|
|
1998!! AKIRA-SEIKI ASL-30 CNC TURNING CENTER / LATHE w/ FANUC O-T CONTROL
aims 1998! AKIRA-SEIKI ASL-30 CNC TURNING CENTER/ LATHE w/ FANUC O-T CONTROL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made by Akira-Seiki. This is a CNC Turning Center/ Lathe in GREAT condition. Model# ASL-30 Serial# 98D055-033 Date of Manufacture: 1998 This VMC is currently coming out of a facility whose owner has decided to retire. This company was doing precision work for the Defense& Aerospace Industry. In particular Military Aircraft parts. We are pleased to offer you this great equipment! Please check our other auctions for an Akira-Seiki JR-C, an Akira V-3A, a Haas VF-1, a Femco Durga 25E, a Promecam RG 25-12 Press Brake coming from this great looking, well kept shop. We spoke to the shop foreman and he said the equipment was always well ... moremaintained and their machinery ran and performed flawlessly. This is truly an Excellent find. Please check the last few photos to see a view of this facility. We here at Reliable Tools strive to provide you with quality equipment, at a fraction of the cost. So act fast because a deal like this won't last long. Features: Fanuc Series O-T. Symco#R8-565E-1.2 Bar Feed. RS-232 Port. Coolant System. Strong 8" Power Chuck. Hydraulic Tailstock. Chip Conveyor. Cartridge Type Spindle. 12-Station High Speed Turret. High Horsepower for Heavier Cuts. Full Enclosure. Double Nutted Ballscrews. Specifications: Working Capacities: Swing Over Bed: 24" Maximum Turning Diameter: 15" Maximum Turning Length: 25" Travels: X-Axis: 8" Z-Axis: 25" Feedrates: X-Axis Rapid Traverse: 1.200 ipm Z-Axis Rapid Traverse: 1.200 ipm Spindle: Spindle Nose Mount: A2-6 Diameter of Spindle Bore: 2.05" Maximum Spindle Speed: 20 to 4.500 rpm Hydraulic Tailstock: Quill Diameter: 2.5" Quill Stroke: 3.540" Quill Taper: 4 Morse Taper Turret: Number of Tool Stations: 12 Square Tool Shank Capacity: 0.75" Round Tool Shank Capacity: 1.25" General: Electrical: 205- 235
|
|
|
MIYANO BNC-34S CNC LATHE GE FANUC OT-Includes Conveyor, Hydraulic Pump & Manuals
MIYANO BNC-34S CNC LATHE GE FANUC OT-Includes Conveyor. Hydraulic Pump& Manuals Miyano BNC-34S CNC Lathe complete with scrap conveyor and hydraulic pump. I believe the date on this is 1994. It was running just fine until someone took out the control board(not sure why? So of course, this will need to be reinstalled. Also comes with all manuals. Must be picked up within 7 days of winning bid. Buyer responsible for loading and freight. Located in the Bradenton/Sarasota area of Florida. I have been selling on ebay for over 10 years and have 100% feedback on user ID molly726shopping. I have started a new venture and will now also be listing tig torch kits. Parts, and accessories, as well as other business and industrial items under this new user ID. Please contact me through ebay if you ever have any questions or would like more pictures ... moreon any item. Please note that payment is expected within 2 days of auction's end. Unless other arrangements have been made. Buy It Now listings require immediate payment. Payment is expected within 2 days of auction's end. Buy It Now items require immediate payment. All items are shipped within 1 day of receiving cleared payment.
|
|
|
FEMCO HL-55S CNC Lathe, 55hp, 15" Chuck, Fanuc, 2006, Tailstock, ONLY 800 hours!
FEMCO HL-55S CNC Lathe with ONLY 800 hours of actual Run Time! Fanuc Oi-TC Control Strong 15" Chuck Hydraulic Tailstock with 48" between Tailstock and Chuck Jaws Year: 2006 but Used very little for prototype work. Machine is running and ready for any inspection. SPECIFICATIONS CONTROL: FANUC 0I TC SWING: 28" MAX. MACHINING DIAMETER: 24" CHUCK SIZE: 15" SPINDLE SPEED: 2.500 RPM HORSE POWER: 40 TRAVELS-X AXIS: 13.38" Z AXIS: 50.0" CENTER DISTANCE: 55.0" TURRET TOOL STATIONS: 12-O.D. TURNING: 1" I.D. BORING: 2" SPINDLE BORE: 5.00" BAR CAPACITY: 4.50" EQUIPPED WITH: STEADY REST& CHIP CONVEYOR Contact Larry via email or phone at 517-782-2808 ext 23 with any questions or to schedule a showing. Thanks. Note: ALL machinery is sold AS IS WHERE IS. L&K Leasing and its owners are not ... moreresponsible for any and all damages done during Loading. Transport, or UnLoading of said machinery. Any damages which may result during loading, transport, or unloading of machine is the sole responsibility of the buyer.
|
|
|
FEMCO WNCL-35 CNC Lathe, 35hp, 15" Chuck, Fanuc, 1995, Tailstock, ONLY 800 hours
FEMCO WNCL-35 CNC Lathe with ONLY 800 hours of actual Run Time! Fanuc OT Control Kitagawa 15" Chuck Hydraulic Tailstock with 30" between Tailstock and Chuck Jaws Year: 1995 but Used very little for prototype work. Machine is running and ready for any inspection. Technical details Max. Swing Over Bed 24.4" Max. Turning Diameter 21.25" Spindle Bore 4.5" Bar Capacity 4.5" Spindle Nose A2-8 Chuck Diameter 15" Spindle Speed 2500 Rpm Spindle Motor 30/40 Hp Number Of Turret Stations 12 Turret Locking Force 5917 Lbs. OD Turning Tool Size 1" ID Boring Tool Size 2" X-Axis Travel 11.31" Z-Axis Travel 29.13" Approx. Dimensions 139" X 83" X 81" Approx. Weight 16.292 Lbs Contact Larry via email or phone at 517-782-2808 ext 23 with any questions or to schedule a showing. Thanks. Note: ... moreALL machinery is sold AS IS WHERE IS. L&K Leasing and its owners are not responsible for any and all damages done during Loading. Transport, or UnLoading of said machinery. Any damages which may result during loading, transport, or unloading of machine is the sole responsibility of the buyer.
|
|
|
2013 Doosan Lynx 220LMSC CNC Live Tool Sub Spindle Lathe Turning Center Fanuc
2013 Doosan Lynx 220LMSC Live Tool. SUB SPINDLE, Full C Axis CNC Turning Center Machine is in excellent running. LIKE NEW, condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358. Specifications: Control. Fanuc 0iTD. Swing Over Bed. 23.6" Swing Over Carriage. 14.63" Max Bar Capacity. 2.625" Distance Between Spindles. 29.68" Max Turning Diameter. 11.8" Spindle Speed(Main) 4.500 RPM. Spindle Speed(Sub) 6.000 RPM. Spindle Motor(Main/Sub) 20/7.3 HP. X-Axis Travel. 8.07" Z-Axis Travel. 21.6" Rapid Traverse Rates(X/Z) 1.181/1,1417 IPM. Turret Positions. 12. Turret Index Positions. 24. Live Tool Max RPM. 6.000 RPM. Floor Space(Length Width) 109” x 64” Machine Weight.
|
|
|
Emco PC 50 Turn CNC Lathe Collet Chuck FANUC O Controls 6 Tool Holder
Free Shipping or Pickup Discount- See Details Below 100% Operational. Ready to Run. Comes with everything shown in pictures and videos. Please note that the free shipping is a $250-$450 value. More details below video. These videos belong to me and to this listing only. Some of the things included. Emco PC 50 Turn CNC Lathe. Emco Fanuc O Controls. Complete PC with Emco's RS485 ISA Card Installed. Comes with all cords. Cables, keyboard and mouse. WinCam. WinNC and 3dVeiw installed. Emco Software and machine data disk. Manuals(read below) This machine has been fully tested in WinCam and WinNc. All spindle speed variations tested. Axis feed rates, and tool positions. Both axis drive smoothly throughout the whole bed and are accurate. Fanuc O control keyboard works great. The machine has the following options installed; Collet Chuck. Manuals; ... moreLots of software manuals. Machine manuals, guides, electrical diagrams and more on computer. Anybody can learn to use this with all the educational manuals included. WinCam level 1&2 guide, Fanuc O guide and machine manual printed. WinCam Level 2 guide that is printed has instructions for external threading. Tooling; 1/4" 1/2" 5/8" collets included. 1 Emco cut right tool. Expect to get more tooling, this is just to try out machine. You can use 1/2" tooling in turret. Recommend 3/8" Internal tool need 10mm shaft. The PC is older and has Windows 98se on it. It is the highest windows operating system that will work with Emco's software. The PC is reliable and fast for running Emco's programs. This is required and the OS can not be upgraded. The PC Turn 50 enables all major processing possibilities of an industrial CNC machine: Facing. Plain and contour turning. Grooving. Threading. Drilling. Emco'PC' CNC machines are compatible with CAD/CAM systems and are user friendly. Offer full compatibility with industrial CNC machines and. Proprietary control systems. Features 2-axis lathe in an industrial slant-bed design. Interchangeable cont
|
|
|
2008 Doosan Lynx 220LC CNC Lathe Turning Center Fanuc with TURBO chip conveyor
Doosan Lynx 220LC EQUIPPED WITH: Maximum Swing: 20.1” Maximum Turning Diameter: 12.6” Nominal Turning Diameter: 8.3” Maximum Turning Length: 21” X-Axis travel: 6.9” Z-Axis Travel: 21.7” Turret Position: 12 Spindle Nose: A2-6” Spindle Bore: 3” Maximum Bar Capacity: 2.62” Spindle Speeds: 40 to 4.000 RPM Spindle Motor: 20 HP Equipped With: Collet Chuck Fanuc Series Oi-TC CNC Controls Tailstock Turbo Systems Chip Conveyor Coolant System Splash/Chip Guards Parts Catcher Hours: 2749 Shipping and Rigging by buyer
|
|
|
CNC LATHE FANUC TURNING CENTER MACHINE 12 CHUCK CONVEYER SUPERMAX No RSV
CNC TURNING CENTER SUPERMAX TC 26L(long bed) Supermax 26L CNC Lathe– YCM TC 26L Very Good Condition and Ready to use. The Cutting Time is 2821 hours. This machine was only used part of the time. The Power On Time is 13230. Fanuc 18T Control. Serial# 010117 Year 2001 Programmable Hydraulic 12’ MMK chuck(fits Kitagawa jaws) 19.68” swing. 43.3"center to center. Tool Setter. Programmable Hydraulic Tailstock. Chip Conveyer. Gearbox spindle with Low and High Gear. 3000 RPM 220 V 3 phase 40 KVA YCM Website. More info. See control Specs and scroll down to TC 26L Lathe Specs. YCM is very much in business and parts are available. Fanuc Controls including Servo Motors and Drive Motors are Top Of The Line. All the Manuals including Fanuc Control Operator Manual. Operator Machine, Electrical, Mechanical Manuals#1 and#2, Fanuc Control Maintenance, ... moreFanuc Control Parameter, Loading cost $1.000 Must be paid by buyer. IF YOU HAVE ANY QUESTIONS REGARDING THIS ITEM WE WELCOME YOUR EMAILS INQUIRIES WIRE PAYMENTS ARE PREFERRED. THIS SALE IS FINAL TERM AS IS WHERE IS. WE CAN ARRANGE THE SHIPMENT GLOBALLY BUT CUSTOMER HAVE TO PAY FOR THE FREIGHT/Customs Duties LOCAL PICKUP'S WELCOME.
|
|
|
Doosan Puma 2000Y Live Tool Y Axis CNC Turning Center Lathe Daewoo Fanuc 8" chk
2008 Doosan Puma 2000Y CNC Turning Center with Live Tool and Y Axis Specifications: Control. Fanuc 18iTB Swing Over Bed. 23.6" Max Bar Capacity. 2.625" Max Turning Length. 20.1" Spindle Speed. 45- 5.000 RPM Spindle Nose. ASA-A2-6 Spindle Motor. 20 HP X Axis Travel. 10" Y Axis Travel. 4" Z Axis Travel. 22.8" X& Z Rapid Traverse Rate. 790/ 945 IPM Number of Tools. 12 Live Tool RPM. 5000 RPM Live Tool Motor. 7.5 HP Floor Space Required. 123" x 70" Weight. 10.470 lbs Equipped With: 2) X Axis Live Toolholders. 1) Z Axis Live Toolholder. Tool Presetter Parts Catcher Programmable Tailstock 8" Hydraulic Chuck Please contact Jason Stob 708 790-3358 with any questions. Financing Available! Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid ... moreby the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, how
|
|
|
2007 Hardinge Talent 6-45 CNC Lathe w/ Fanuc 0i-TC Control Excellent!
2007 Hardinge Talent 6-45 CNC Lathe w/ Fanuc 0i-TC Control Excellent! Click to View Image Album Click to View Image Album Click to View Image Album 2007 Hardinge Talent 6-45. One owner, always on oil coolant, CNC lathe. Just 2000 hrs. of on time w/ probably less then 1/3 of that as run time. The following information is straight from the original Hardinge invoice. 4 Morse taper tailstock, A2-5 to 16C collet adaption chuck, ER32 collet holder, new 6" power 3 jaw chuck, 5 ea. boring bar holders, all manuals. CNC lathe is under power in Costa Mesa, CA. This machine looks more like a demonstrator then a used machine. Original price was over $80K. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada ... moreor Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficu
|
|
|
2007 ROMI M20 M-20 M 20 CNC LATHE TOOLROOM FLATBED ENGINE FANUC 12" CHUCK
2007 Romi M20 CNC Lathe 20" Swing x 60" Between Centers Fanuc 21iT Control Our Stock Number 1370-021214 Machine Description ROMI M 20. FANUC 21iT, 20" SW, 60" CC, 12" CHUCK, TAIL Serial# 022-092862-404 Year: 2007 Specifications: are accurate to the best of our knowledge) SWING OVER BED 20.47" SWING OVER CARRIAGE WINGS 17.72" SWING OVER CROSS SLIDE 10.24" CENTER DISTANCE 60" X AXIS TRAVEL 11.02" Z AXIS TRAVEL 60" SPINDLE SPEED 3- 3.000 RPM SPINDLE NOSE A2-6 HOLE THRU SPINDLE 2.56" SPINDLE MOTOR 15 HP TAILSTOCK QUILL TRAVEL 5.11" TAILSTOCK QUILL DIAMETER 3.15" TAILSTOCK TAPER HOLE MT#4 APPROX. DIMENSIONS 144" x 65" x 65" APPROX. WEIGHT 8.000 LBS Equipped With: FANUC 21iT CNC CONTROL WITH 10.4" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION MANUAL. ... moreTEACH& RUN MODES, DUAL HANDWHEELS TOOL POST 12" MANUAL 3-JAW CHUCK FULLY ENCLOSED SPLASH& SAFETY GUARDING MANUAL TAILSTOCK. REMOVABLE CHIP PAN, CONSTANT SURFACE SPEED ALL AVAILABLE MANUALS, This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool
|
|
|
1998 Clausing Colchester Storm 80 CNC Lathe Turning Center w/ Barfeed Fanuc 21-T
1998 Clausing Colchester Storm 80 CNC Lathe w/ Barfeed Machine is in excellent condition and can be seen under power as needed Specifications: Control.Fanuc Series 21-T X-Axis Travel.6.5" Z-Axis Travel.13.78" Spindle Speed.6000 RPM Spindle Nose.A2-5 Swing.16.54" Maximum Turning Diameter.6.69" Maximum Shaft Length.13.78" Bar Capacity.1.65" Rapid Traverse X/Z Axis.394/591 IPM Spindle Motor.15 H.P. Electronics.230/60/3 w/Transformers for 208/60/3 Approximate Weight w/Barfeed. 7.500 LBS. Approximate Machine Dimensions.117"L) x 74"W) x 73"H) Equipped With: RS-232 Port MBF 1000 Magazine Barfeed Chip Conveyor Programmable Tailstock 6" Collet Chuck(12 to 15) VDI-30 Tool Holders Parts Catcher Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra ... morecosts. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items
|
|
|
1996 Yang ML 25 CNC Lathe w/Fanuc OT Control
1996 YANG ML-25A CNC Lathe Featuring a FANUC O-T Control tion Description MAXIMIM SWING OVER BED: 21.63" MAXIMUM TURNING DIAMETER: 11" MAXIMIM TURNING LENGTH: 17.5" CHUCK SIZE: TBD, X-AXIS TRAVEL/CROSS: 8.5" Z-AXIS TRAVEL/LONGITUDINAL: 20.5" FEED RANGE: 590 IPM, TURRET TOOLING STATIONS: 12. VDI40, SPINDLE SPEEDS: 10-3500 RPM, SPINDLE MOTOR: 24 HP, MAXIMIM BAR CAPACITY: 2.5" MACHINE DIMENSIONS: APPROX. 155.5" X 57.08" X 68.11" NET WEIGHT: APPROX. 11550LBS, MADE IN: TAIWAN, Questions: Please contact Robby@ 714-892-9800. Shipping Quotes: Please contact
|
|
|
Mori Seiki SL 5H Slant Bed Lathe Fanuc CNC
Mori Seiki SL 5H CNC Lathe Specifications 761 1984 Max. 24.4 in(Programmable. Variable) 22 to 2200 rpm 3 in 12 Max. 40.1 in Max. 12.2 in#4 MT 25 HP A.C. 16.000 lb Equipped With Fanuc 3TF CNC Control 10" 3 Jaw SMW Air Chuck RS232 Port Automatic Lubrication System Some Turret Tooling Tailstock with Programmable Quill For More Info Call Maury Cohn 1 800 888 4312 Haas. Makino, Okuma, Fadal, Haas, Daewoo,
|
|
|
CNC Lathe - Mighty Viper VT 25B - Bar Feeder Tool Probe fanuc 18T 3.07 Bore
This is a good used Mighty Viper CNC lathe for sale Under power in my plant. Come see it run, a2-8 spindle nose. 35 HP, Has ATS collet chuck mounted with lots of Hardinge S-35 pads. Also comes with 10" 3 jaw power chuck, 12 Position Turret Fanuc 18-t control, Pnuematic bar feeder, Tool Probe, Chip Conveyor, Parts Catcher, Machine is sold as is where is. So please ask questions. I am willing to test programs etc. Deposit of 10% must be sent upon purchase within 7 days. Balance due when machine picked up, certified bank check. Will assist with arranging rigging etc. But all costs are the buyers responsibility
|
|
|
Hardinge GT27SP "Super Precision" CNC Lathe, 1-1/16", 5C Collet, Fanuc 18T
Hardinge GT-27SP"Super Precision" CNC Turning Center New 1994 View a video demonstration of this machine below or use the link. General Specifications As Per Brochure(Please Verify Details) Spindle Configuration: ANSI A2-4" Round 5C Collet(Through Capacity) 1.062" 5C Step Chuck(Gripping Capacity) 4" AC Digital Spindle Drive System: 5 HP Speed Range: 6.000 RPM Allowable Weight on Spindle: 75 lbs Swing Over Bed: 11.76" Bar Capacity: 1.06" Spindle Nose: A2-4 X-Axis Travels: 11.96" Z-Axis Travels: 11.06" Spindle Motors: 5 HP Capacity Swing Over Way Cover: 11.76 Swing Over Tooling Top Plate: 2.654" Square Shank Tool Size: 1/2" Round Shank Tool Size: 3/4" X-Axis Traverse Rate: 472 IPM Z-Axis Traverse Rate: 630 IPM X-Axis Travel: 11.968" Z-Axis Travel w/ 5C Spindle: 11.062" Distnace ... moreFrom Spindle Face to Top Plate w/ 5C Spindle: 11.259" Compressed Air Requirment: 70-90 PSI Shipping Weight: 5.700 lbs Machine Dimensions: 70" x 58.70" x 62" Electrics: 230 Volts. 3PH, 60 Cyc Equipped With: Fanuc 18T CNC Control 5C Collet Closer 9-position ID Tool Block Misc ID/OD tool holders Parts Catcher Chip Conveyor Spego Bobcat"short" bar loader Hours: 57.278 Power On 19.945 Cutting Very clean! MACHINE WILL BE CLEANED AND SERVICED PRIOR TO RELEASE. NOTE: Although the barfeed was connected it has not observed operating. A&M makes no claim as to the functionality of the barfeed. But it is included. Please contact Brandon Osbourn for any questions. Details or to set up an inspection under power. 303-651-6545/
|
|
|
1993 Star RNC 16 Swiss Type CNC Lathe Fanuc OT 3 HP 16MM FMB Mini Turbo Barfeed
1993 Star RNC 16 Swiss Type Machine is in good running condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358. Specifications: Control. Fanuc OT Spindle HP. 3 HP RPM. 300 to 8.000 Bar Capacity. 16MM-5/8" Machine Weight.2.500 Lbs Equipped With: Fanuc OT FMB Mini Turbo Magazine Barfeed Auto Unloader Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees ... moreregarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. 520 MACHINERY SALES LLC COMPANY INFORMATION 520 Machinery Sales is a new and pre-owned equipment full service. Stocking, dealer out of Central and Northern Illinois. We specialize in the sale of Daewoo/ Doosan, Haas, Milltronics, Mazak, Mori Seiki, Kitamura and Miyano CNC equipment. Our goal is to maximize our customer's ability to make money by selling un-utilized(or under-utilized) CNC equipment. Do you have a machine sitting that has not been running for awhile? We can help. Are you considering trading in a used machine towards the purchase of a new machine? Are yo
|
|
|
2005 Amera Seiki T-415 CNC Lathe Turning Center Fanuc Tailstock Box Way Conveyor
2005 Amera Seiki T-415 CNC Turning Center Please contact Jason Stob 708 790-3358 Specifications: Control. Fanuc OiT-B. Swing over Bed. 27” Z Axis Travel. 40” X Axis Travel. 10.43" Chuck Size. 15" Bar Capacity. 4.62" Spindle Nose. A2-11. Spindle Speed. 2500 RPM. Spindle Motor. 35 HP. Turret Positions. 12. Machine Weight. 17.100 lbs. Equipped With: Fanuc OiTB Control. 15” 3-Jaw Chuck. Fully Programmable Tailstock. Chip Conveyor. Box Ways. You tube links: Http:youtu.be/6asbMjpwSug http:youtu.be/p5woQ-dvS8o http:youtu.be/sCbrfLavJoE http:youtu.be/Jqslp0MRDII Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of ... moreobtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however,
|
|
|
Takisawa TS-25 CNC Lathe Fanuc 0T Control 10" Pnuematic Chuck 3" Bore 'VIDEO
254mm(10″ Pnuematic Chuck, 76.2 mm(3″ diameter Bar Capacity, 400mm(16″ Swing, 650mm(25″ Between Centres, 10 station turret, Tailstock, Fanuc 0t Control, Runs Great! Questions Call Steve@ 866-803-5202, Shipping Quotes Contact VIDEO
|
|
|
1994 WASINO 3 AXIS CNC LATHE, FANUC 0TC TAILSTOCK, LIVE TOOLING, 3" BAR CAPACITY
For sale I have a 1994 Wasino LJ6-MC three axis cnc lathe. It is equipped with: We bought this machine used about thirteen years ago. At that time. It moved into our one-man, one-shift operation with five cnc machine tools. Since then, it has run sporadically mostly threading hollow shafts. Days and weeks of power-off no use are common in our environment. While this machine almost exclusively ran steel parts, the majority were repeat runs. This lathe is in perfect running condition, and can be seen under power cutting metal at any time by appointment. Unit is equipped with: 10" hydraulic chuck Tool eye, manual, inoperative Tail stock, drag-along with programmable quill, not installed(We removed the TS long ago because it got in the way; will be happy to re-install for buyer if so desired) 12 station turret with 6 driven tool positions. ... moreChip conveyor; 5 Boring bar holders with 2.0" id; 6 od tool holders; 1 face tool holder; 160 psi external coolant pump with variable speed frequency drive. Separate coolant tray. All available manuals, including original WASINO 3-ring binder. If you want a workhorse of a machine, this is it. This Wasino may not be the latest and greatest, but it's excellent Japanese iron that was built to last forever. It's holding tight tolerances, and the third axis does all kinds of cool things. This machine is ready to make parts as soon as it arrives at your shop. While rigging out and shipping are the responsibility of the buyer, I am happy to help with these things in any way I can. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144aea73371-0x111-
|
|
|
1999 Supermax YCI CNC Turning Center CNC Lathe, Fanuc O-T Fanuc Control
1999 Supermax YCI CNC Turning Center w/ Fanuc O-T Control Used Max Bar Capacity is 2" 8" Chuck No Tooling. We have ran this machine for 5+ years now and it has always been a good working machine. The machine does have one issue. The tool changer will loose it's position. The machine may run 3 months and it won't do it or it may run a week and do it. It is not consistent but happens at anytime. It seems like a simple fix if someone would take the time. The machine is actually too small for us, so instead of investing money into it we replaced it with a larger turning center. The machine does show wear and tear as seen in the photos. All photos were just taken. The control buttons are wore some. The light holder up top is broke. The chip conveyor works and the machine holds good tolerances. We assume the tail stock works but ... morenever needed to use it. I have a video. It was taken right before it was taken out of service. At higher spindle speeds it sounds like the machine needs bearings, however we are 99% sure it needs belts because the noise is not consistent and goes away. The belt are in okay shape but shouldbe replaced in the near future. This machine has done well for us. Please message for the video. It will not let me post it. Any questions please ask me. Shipping and/or pick up- Machine weighs around 7500lbs. It is located in Philipsburg PA. It is and has always been in a heated building. There is a $450.00 loading fee. A rigging company will come in and load it for us. All shipping is the buyers responsibility. Payment- I can accept cashier check or money order. CC or Paypal of $250.00 deposit only. Deposit in 24 hours. Balance in 7 days. No warranty. As-is.
|
|
|
Daewoo Doosan Puma 230-B CNC Turning Center Lathe Fanuc Tailstock 12 Tools 8" 03
2003 Daewoo Puma 230B CNC Turning Center with Tailstock Video: http:youtu.be/YoSdL6SzAgE Specifications: Control. Fanuc 21i-T Control Swing Over Bed. 21.0" Swing Over Carriage. 13.0" Distance Between Centers. 26.3" Turret Stations. 12 X-Axis Travel. 9.3" Z-Axis Travel. 22.8" Rapid Traverse Rates X/ Z. 945 IPM/ 1.200 IP Spindle Bore Diameter. 2.99" Draw Tube I.D. 2.6" Spindle Speeds. 45-4.500 RPM Spindle Motor. 25 HP Turret Stations. 12 Machine Weight.approx) 9.470 LBS Equipped With: 8" Hydraulic Chuck Programmable Tailstock Chip Conveyor Please call Jason Stob 708-790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buy
|
|
|
1998 Emco Turn 325 CNC Turning Center / Lathe Fanuc 21T Control
Super nice Emco Turn 325 with a Fanuc 21-T control out of a medical facility where is say only limited use. Machine is as nice as it looks. Has a 5c spindle and comes with the manuals. Collets, etc. Inspection under power in my Aberdeen, NJ shop is welcome call 917-974-7381. NJ and NY residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS. Payment is by check or wire.
|
|
|
Daewoo Puma 12S CNC Lathe CNC Turning Center with Fanuc 0T CNC Control
Machine Sold with a 30 Day MDNA Money Back Return Guarantee. Seller will load on Buyer's Truck at No Charge. Payment Due 10 Days after Auction Close. Machinery Dealers National Association Member DAEWOO PUMA 12S CNC TURNING CENTER Model Puma 12S. S/N PS100977, New 6/1996 Stock# K14237 EQUIPPED WITH: Fanuc OT CNC Control w/CRT. Heavy Duty 35 HP Geared Spindle, 10" 3-Jaw Power Chuck with 3.07" Thru Hole. Auto Backlash Compensation, 12 Station Tool Turret. Tool Setter, Constant Surface Speed, Bed Mounted Programmable Tailstock. Heavy Duty Box Way Construction, Coolant System. Chip Conveyor, 6 Boring Bar Holders and 6 Stick Tool Holders. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 22.4" Maximum Turning Diameter. 15" Maximum Turning Length. 30" Chuck Size. 10" Cross Travel(X-Axis) 8" Longitudinal Travel(Z-Axis) ... more30" Rapid Traverse Rate(X-Axis) 480 IPM Rapid Traverse Rate(Y-Axis) 630 IPM Number of Turrets. 1 Tool Positions. 12 Total Spindle Bore. 3.58" Bar Capacity with Chuck and Actuator. 3.07" Spindle Nose. A2-8 Spindle Speed Range(1 RPM Increments) 10-3000 RPM Spindle Horsepower. 35 HP Approximate Machine Dimensions. 125" x 82" Approximate Machine Height. 80" Approximate Machine Weight. 15.600 LBS CONDITION: Machine Appears to be in Very Good Condition! Located in our warehouse in Cincinnati. Price includes loading onto your truck. Video Links 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 Summary of
|
|
|
Rhino Robotics ST/7 with ATC turret fanuc 6T cnc lathe Rhino robots st7 st 7
Hello. Up for auction is a Rhino Robotics ST/7 cnc lathe with ATC turret. And fanuc 6T emulated control. The machine powers up and x and z axis are able to move and home, I have also connected it to an air supply and tested the atc, which works but after a couple cycles, the lock pin sticks. It is easily moved by hand to continue. When I purchased the machine it was described to have a faulty spindle drive. I figured it would be simple enough to"trace and replace" the bad component. but when I got it home and removed the back cover, I noticed the entire drive board was missing. I originaly planned on using a kb212d and some kind of pwm to dc board to control the spindle, which I have never completed. since then I have gotten a good deal on another lathe and I don't have the time for this one anymore. the machine comes with the ... moreoperating system on a 3.5 floppy which it needs inserted to boot(no on board memory) and also comes with a 5.25 floppy with diagnostic software, also included are the operation manuals and maintenance manual, and tail stock. the auction does NOT include the Mesa Spinx1 board and the KBG212 dc control, although I will sell them for an additional $60.also I could include the steel"worksmart" bench that it is on for an additional $100. Please see the rhino robotics site for further info.Buyer is responsible for pickup or shipping. I am willing to help Please feel free to email me with any questions. thanks for looking and happy Ebaying
|
|
|
Used Mori Seiki SL150 SMC CNC Lathe Turning Center Live Tool Sub Spindle Fanuc
1996 Mori Seiki SL150 SMC CNC Turning Center w/ Live Tool and Sub Spindle Specifications Control. Fanuc MSC 518 Swing Over Front Bed. 24.4" Swing Over Cross Slide. 17.9" Max Bar Capacity. 1.86" Distance Between Spindles. 24.8" Max Cutting Diameter. 16.9" Spindle Speed(Main) 5.000 RPM Spindle Speed(Sub) 3.500 RPM Spindle Motor(Main/Sub) 15/7.5 HP X-Axis Travel. 9.1" Z-Axis Travel. 20.5" Rapid Traverse Rates(X/Z) 707/945 IPM Turret Positions. 12 Machine Weight. 9.500 Lbs Machine Dimensions. 87"L x 68"W x72"H Equipped With: Fanuc MSC518 Control Pneumatic Main Chuck LNS short bar feeder Eco Load Chip Conveyor Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!
|
|
|
1987 Mori Seiki Sl3A CNC Lathe Refurbished SL 3 Turning Center Tailstock Fanuc
1987 Mori Seiki SL 3A Chuck Size: 8" Axis: 2 Power: 20.1 hp Max RPM: 3500 rpm Swing: 22.4" Machining Length: 24" Tailstock: Yes Weight: 9240(LBS) Control: Fanuc Chip Conveyor Fanuc Control For More Information or to Inspect Please Call Maury Cohn 1 800 888 4312
|
|
|
1999 Mori Seiki Sl 20 CNC Programmable Tailstock Lathe Turning Center Fanuc
Mori Seiki 2-Axis CNC Slant Bed Turning Center Model No. SL-20 Fanuc MFT6 Machine Completely Refurbished Swing Over Bed: 17.72" Swing Over Cross Slide: 11.81" Maximum Turning Diameter: 8.27” Maximum Turning Length: 20.47” Maximum Distance Between Centers: 24" X-Axis Travel: 4.1” + 1” 5.1” Total) Z-Axis Travel: 22.05” Rapid Traverse Rate: 470 IPM X 590 IPM Z Spindle Speeds: 35- 3.500 RPM Hole Thru Spindle: 2.2" Bar Work Capacity: 1.7” Spindle Nose Mount: JIS A2-6 Number of Tools Turret: 10 Tailstock Taper: MT No. 4 Overall Machine Dimensions: 8' x 5' x 6' High For More Info or To Inspect Please Call Maury Cohn 1 800 888 4312
|
|
|
1987 Mori Seiki TL-5 TL5 CNC Lathe Tailstock Turning Center FANUC 18
1987 Mori Seiki TL5 CNC Lathe Tailstock Turning Center Complete Refurbish MFD: 1987 SPECIFICATIONS: MAXIMUM SWING: 18" M AXIMUM SWING OVER CARIAGE: 14.9" DISTANCE BETWEEN CENTERS: 82.6" RECOMMENDED WORKPIECE DIAMETER: 13-3/4" MAXIMUM LONGITUDINAL TRAVEL: 76" MAXIMUM CROSS TRAVEL: 9-1/4" hEIGHT. FLOOR TO SPINDLE CENTERLINE: 43.3" SPINDLE SPEEDS: INF. VAR. 12 TO 1400 RPM SPINDLE HOLE: 4" SPINDLE NOSE: A2-8" SPINDLE BEARING: 5.9" DIAMETER TAILSTOCK QUILL DIAMETER: 4.33" TAILSTOCK QUILL TAPER: NO. 4 MT TAILSTOCK QUILL STROKE: 4" TURRET TOOL POSITIONS: 8" MOTOR: 18.5 KW(25 HP) EQUIPPED WITH: FANUC 18 CNC CONTROL 12" 3-JAW HYDRAULIC POWER CHUCK TAILSTOCK HARDWAYS CHIP CONVEYOR COOLANT OAD: 226" X 76" X 96" HIGH APPROXIMATE WEIGHT: 14.500 LBS. For More Info Please ... moreCall Maury Cohn 1-800-888-4312 HAAS. FADAL, OKUMA, MIYANO, MAZAK, MAKINO
|
|
|
2001 Doosan S390 CNC Lathe Fanuc, Tailstock, Very Nice
2001 Doosan S390 CNC Lathe Fanuc 18T Tailstock Chuck Size: 12" Bar Capacity: 3.0" Axis: 2 Power: 35 hp Max RPM: 2500 Turning Dia: 15.35" Swing: 22.8" Machining Length: 30" Tailstock: Yes Control: FANUC 18T Weight: 12.000 Chip Conveyor Coolant Tank Box Ways Price $42.800.00 Prepped and Loaded For Shipping For More Info Or To Inspect Please Call Maury Cohn 1 800 888 4312
|
|
|
1998 Daewoo Puma 250 LB Fanuc Control, 12" Chuck, CNC Lathe, Tailstock,Mori
1998 Daewoo Puma 250L/B Fanuc Control, 12" Chuck 3.54 Dia. Thru Spindle 40" Z Travel. 51" Turning Length Motor 30 HP Box Way Tailstock. Chip Conveyer. For More Info Or To Inspect Please Call Maury Cohn 1 800 888 4312
|
|
|
HITACHI SEIKI HT25 CNC LATHE, FANUC 10TE-F, 2-AXIS, 10" CHUCK. (USED)
SPECIFICTIONS:CHUCK SIZE STANDARD 10" SPINDLE NOSE: A2-8 HOLE THRU SPINDLE: 2.06" SPINDLE SPEED: 20-3600 RPM(3 SPEED GEAR BOX) HIGH.MEDIUM,LOW.RAPID TRAVERSE X/Z: 315/472 IPM TOOL SIZE: 1" TOOL SIZE OD/ID: 1.5"2" TAILSTOCK QUILL STROKE: 3.9" TAILSTOCK SPINDLE DIAMETER: 3.5" TAILSTOCK SPINDLE TAPER: MT#5 MAIN MOTOR: 25HP AC APPROX. WEIGHT: 12,000 EQUIPPED WITH:FANUC 10TE-F CNC CONTROL. 10" 3-JAW HYD. CHUCK. 10 POSITION TURRET. TAILSTOCK. CHIP CONVEYOR. ALL AVAILABLE TOOL HOLDERS. ALL AVAILABLE MANUALS.NOTE:230 VOLTS,3 PHASE CONTACT SELLER FOR SHIPPING INSTRUCTIONS.MUST BE OUT BUY MAY 14. RIGGING AND LOADING WILL HAVE TO BE ARRANGE BY BUYER. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-145c2de36f4-0x108-
|
|
|
Star SR16 Swiss Turn CNC Lathe w Fanuc 16-TT Controls
For Sale a Star SR16 Swiss Turn CNC lathe. 5/8" bar stock capacity. 7" head stock travel. Machine has 5 OD fixed tools, 3 OD live tools. 3 ID tools for working on the main spindle and 3 ID tools for working on the sub-spindle. Also has part ejector chute and conveyor to bring finished part out of the machine. Fanuc 16-TT controls for main and sub-spindle control. Machine is still in service running a variety of materials including stainless and titanium. Call 512-759-4505 for more info on the machine. We can arrange riggers to set it on a flat bed truck for you at your cost.
|
|
|
Daewoo Doosan Lynx CNC Turning Center Lathe Fanuc Tailstock 12 Tools 20HP 2006
2006 Daewoo Doosan Lynx 210A CNC Turning Center with Tailstock Specifications: Control. Fanuc i Series Swing Over Bed. 20.1" Swing Over Carriage. 11.4" Max Turning Dia. 12.6" Max Turning Length. 12.7" X-Axis Travel. 6.9" Z-Axis Travel. 13.0" Spindle Speeds. 60-6000 RPM Spindle Motor. 20 HP Spindle Bore. 2.08" Draw Tube Bore. 1.81" Turret Stations. 12 Machine Weight.Approx) 7.190 LBS Equipped With: 6" 3-Jaw Chuck Parts Catcher Tool Pre-setter Hydraulic Tailstock Chip Conveyor Misc. Tool Holders All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email
|
|
|
1990 Mori Seiki Sl 20 CNC Tailstock Lathe Turning Center Fanuc
Free Loading& Shipping Prep 1990 Mori Seiki 2-Axis CNC Slant Bed Turning Center Model No. SL-20 8" Chuck Fanuc 10 T Swing Over Bed: 17.72" Swing Over Cross Slide: 11.81" Maximum Turning Diameter: 8.27” Maximum Turning Length: 20.47” Maximum Distance Between Centers: 24" X-Axis Travel: 4.1” + 1” 5.1” Total) Z-Axis Travel: 22.05” Rapid Traverse Rate: 470 IPM X 590 IPM Z Spindle Speeds: 35- 3.500 RPM Hole Thru Spindle: 2.2" Bar Work Capacity: 1.7” Spindle Nose Mount: JIS A2-6 Number of Tools Turret: 10 Tailstock Taper: MT No. 4 Overall Machine Dimensions: 8' x 5' x 6' High Weight 8500 lbs For More Info or To Inspect Please Call Maury Cohn 1 800 888 4312 Okuma. Fadal, Haas, Makino, Doosan, DMG, Miyano, Mazak
|
|
|
Romi M27 CNC Flatbed Turning Center CNC Lathe Fanuc CNC, Big Bore Oil Field 2007
Not just any ordinary CNC Lathe. See below details and feel free to call us with any questions. 773-866-9600. Ask for Mark. Scott, Steven or Manny Bid with confidence. We deliver on the promise. Thank for viewing 24" chuck Romi Model M-27 2-Axis BIG BORE CNC Flat Bed Lathe(2007) 6" Bore. 24" Front Mounted Chuck, 20" Rear Mounted Chuck, Fanuc 21iT CNC Specifications and Equipment Swing Over Bed: 26.97" Max Swing Over Cross Slide Ways: 16.93" Work Swing Over Carriage: 21.26" Distance Between Centers: 87.73" X-Axis Travel: 14.17" Z-Axis Travel: 80.78" Spindle Speed: 37-3000 RPM, Spindle Bore: 6.07" Main Motor Drive: 30 HP, Equipped With: Fanuc 21iT 24.75" 4-Jaw Front Chuck 19.50" 3-Jaw Rear Chuck Chip Conveyor, Contact Us Call for more information: 773-866-9600. Ask for Mark. Scott, ... moreSteven or Manny, Price Quote For emailed price quote: Click on the"email a full quotation" icon above the thumbnail strip photograph on this page. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14653b7a962-0x105-
|
|
|
Mori Seiki SL-3B CNC Turning Center Lathe 10" chuck Fanuc 11TE
MORI SEIKI SL-3B CNC Turning Center. S/N 4919, New 1988. Stock# 30801 Specifications: Swing Over Front Cover- 15.7" Swing Over Carriage- 20.0" Swing Over Cross Slide- 13.7" Stroke End/ Recommend Workpiece Dia. 10.2" 7.8" Maximum Longitudinal Travel- 22.0" Maximum Work Length- 21.6" Maximum Cross Travel- 6.3" Spindle Nose- A2-5 Programmable Spindle speeds- 30 to 3000 RPM Spindle Hole- 2.36" Turret Tool Positions- 10 Standard Tool- 1" Tailstock Quill Diameter- 3.34" Tailstock Quill Taper- 3MT Tailstock Base Stroke- 3.1" Main Motor- 20 HP Weight. Approx- 9500 Lbs. Equipped with: 10" 3-Jaw Chuck Tailstock Assorted Tooling(shown in pic) Chip Conveyor Coolant Pump Manuals PRICE: $19.500.00 USD FOB TRUCK DAYTON OH. Offered locall y an d subject to prior sale. Also su bject to the standard ... moreMD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically unsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
|
|
|
Daewoo Doosan Puma 300LC CNC Turning Center Lathe Fanuc 21iT-B Tailstock 2008
2008 Doosan Puma 300LC CNC Turning Center with 4 inch bar capacity Specifications: Control. Fanuc 21iT-B Swing over bed. 23.2” Swing Over Carriage. 17.7" Max Turning Diameter. 15.7” Max Turn Length. 50.4" Distance Between Centers. 52.8" Chuck Size. 12" Bar Capacity. 4.05" Spindle Bore. 4.53" Spindle Torque. 884 Ft. Lbs. Spindle Nose. A2-11 Spindle Speed.2.800 RPM Spindle Motor. 35 HP Turret Positions. 12 Turret Index(Station/Station)
|
|
|
Miyano BND-34T CNC Lathe w/ Live Tooling, Sub Turret, Fanuc 18 CNC,Parts Catcher
Please see info below and photos on a really Miyano BND 34T CNC Lathe. This CNC Lathe has LIVE TOOLING and a SUB TURRET. The Sub Turret can be used for Simultaneous Machining with the Main Turret or it can Function as a Tailstock. The Miyano also has a parts catcher with parts conveyor. It is also equipped with Barfeed Interface. This CNC Lathe will make someone a great machine. It is available to be seen under power in our Cincinnati. OH warehouse. The Axes are nice and quiet and smooth. The spindle sounds excellent. This machine will make someone an excellent machine. I do have the ability to load this machine on your truck. I can shop and get you a freight rate if you want me to so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com MIYANO BND-34T CNC TURNING CENTER w/ LIVE TOOLING ... moreModel BND-34T. S/N BD50027T, New 1997 EQUIPPED WITH: Fanuc 18T CNC Control with CRT. Live Tooling, RS232 Port for DNC System, Collet Chuck, 5" 3-Jaw Chuck, Barfeed Interface, 8 Station Turret, 6 Station Programmable End Working Turret Provides 3 Axis Simultaneous Cutting Capability, Programmable Part Catcher w/ Parts Conveyor, Heavy Duty Slant Bed Construction, Chip Conveyor, Tooling Package, Coolant System. CATALOGUE SPECIFICATIONS: Max Bar Capacity. 1.312" Max Swing over the Cross Slide. 10.62" Max Work Length for Bar Work. 7" Max Work Length for Chuck Work. 3.15" Max Turning Diameter. 4.75" Cross Travel(X-Axis) 4" Longitudinal Travel(Z-Axis) 11.05" Sub Turret Stroke(B-Axis) 9" Number of Turrets. 2. Turret Positions Main Turret. 8. Turret Positions Sub(End) Turret. 6. Spindle Speed Range.
|
|
|
Romi M20 CNC Flatbed Turning Center Lathe Fanuc 21iT Control 12" Chuck Tailstock
2003 Romi M20 Flatbed CNC Lathe Specifications: Control. Fanuc 21iT Swing Over Bed. 20.4" Swing Over Carriage. 17.7" X-Axis Travel. 11.02" Z-Axis Travel. 60" Spindle Bore. 2.56" Spindle Speeds. 3.000 RPM Spindle Motor. 15 HP Turret Stations. 8 Machine Weight.approx) 8.000 Lbs. Equipped With: Fanuc 21iT Control 12" 3-Jaw Chuck 16C Collet Chuck Tailstock Steady Rest 8 Station Turret Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject ... moreto buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of ite
|
|
|
Daewoo Puma 6 CNC Lathe Fanuc 3T
Retirement forcing sale. Nice Older CNC 10 Station Turret Lathe. Fanuc 3T Controller- GM or Conversational programming. Low time. Comes with 3 Jaw Chuck and Many Soft Jaws. Have all of the manuals and program setup printouts. 220/3ph. 10hp. Tooling and Identical Sister Spare parts are being sold separately. Check my other auctions. Looking for a good home. Sold AS-IS. WHERE IS. Machine located in Davie, Florida and weighs 11,000 lbs. Buyer is responsible for all costs in removal and transport. Seller will help with locating Forklift equipment for loading truck but Buyer is responsible for payment. Machine may be removed ONLY after payment clears the bank. Thanks for looking and good luck bidding!
|
|
|
Cincinnati Hawk 150 CNC Turning Center Lathe Fanuc Control Tailstock 2 inch bar
1998 Cincinnati Hawk 150 CNC Turning Center w/ Tailstock Specifications: Control. Acramatic 2100 Control Max Swing. 15.75" Max Turning Dia. 9.45" Chuck Size. 8" Bar Capacity. 2.0" Spindle Bore. 2.42" Spindle Nose.A2-5 Spindle Motor. 10 HP Spindle Speeds. 5.500 RPM Turret Stations. 12 Tailstock Quill Dia. 2.56" Tailstock Stroke. 3.94" X Axis Travel. 8.45" Z Axis Travel. 17.32" Overall Dims(Approx. 92.5" x 59" x 63" Machine Weight(Approx. 6.200 Lbs. Equipped With: Acramatic 2100 PC Based Control 8" 3-Jaw Chuck Programmable Tailstock Chip Conveyor Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machin
|
|
|
Kia KT-20S CNC Turning Center Lathe Fanuc OT Control Tailstock 8" 3-Jaw Chuck 92
1992 Kia KT-20S CNC Turning Center Specifications: Control. Fanuc OT Max Swing. 15.75" X-Axis Travel. 7" Z-Axis Travel. 20.47" Bar Capacity. 2.06" Spindle Bore. 2.24" Spindle Nose.A2-6 Spindle Motor. 10 HP Spindle Speeds. 4000 RPM Turret Stations. 12 Equipped With: Fanuc OT Control 8" 3-Jaw Chuck Tailstock Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods ... moreinclude wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All item
|
|
|
1996 DAEWOO PUMA 15 CNC LATHE, w/FANUC 16T, 18" KITAGAWA CHK, 62" CENTER DIST.
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 1996 DAEWOO PUMA 15 CNC LATHE. W/FANUC 16T, 18" KITAGAWA CHK, 62" CENTER DIST. Ref# 152566 iammdna XCNCTC DAEWOO PUMA 15 CNC TURNING CENTER. NEW: 1996. SPECIFICATIONS: SWING OVER BED. 31.10" ... moreSWING OVER CARRIAGE. 21" MAX TURNING DIAMETER. 26" DIST BTWN CENTERS. 62" X-AXIS TRAVEL. 14.5" Z-AXIS TRAVEL. 62" SPINDLE MOTOR. 40/49 HP. SPINDLE SPEED. 2.000 RPM. SPINDLE NOSE. A2-11. SPINDLE BORE. 5.2" BAR CAPACITY. 4.62" TOOL CAPACITY. 12 STATIONS. TAILSTOCK QUILL TAPER. MT#6. TAILSTOCK QUILL TRAVEL. 6" APPROX MACHINE DIMS. 15'8" X 100" X 93" APPROX MACHINE WEIGHT. 30.100 LBS. EQUIPPED WITH: FANUC 16T CNC CONTROL. 18" 3-JAW KITAGAWA CHUCK. STEADYREST. TAILSTOCK. CHIP CONVEYOR. ALL AVAILABLE TOOLHOLDERS. Machine Location: HARRISON. NJ Click Here For More Daewoo Machines Click Here For More CNC Machines- CNC TURNING CENTERS- CNC LATHES(s) Questions about this Machine? Call Mike at(800) 873-6224 ext 7540 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National
|
|
|
Doosan Puma 400B CNC Turning Center Lathe Fanuc OiT-D Tailstock 50HP 2013 Daewoo
2013 Doosan Puma 400B CNC Turning Center with 4.62" inch bar capacity and 18" Chuck Specifications: Control. Fanuc OiT-D Max. Swing Over Bed. 30.3" Max. Swing Over Carriage. 23.2" Distance Between Centers. 44.7" Max. Turn Dia. 21.7" Max. Turn Length. 41.4" Spindle Nose. A2-11 Chuck Size. 18" Bar Capacity. 4.62" Spindle Bore. 5.20" Spindle Motor. 50 HP Spindle Speed. 2.000 RPM Max. Spindle Torque(30 Min. Rating) 2.419 Ft.Lbs. Turret Positions. 12 Tailstock Spindle Taper.
|
|
|
1997 Mori Seiki DL 20 Twin Spindle Lathe FANUC 16T CNC Control. Turret
1997 Mori Seiki DL 20 Twin Spindle Lath e( FANUC 16T) CNC Control. Max Diameter Bar Capacity-2" 1.63" Max Swing Over Bed-11" 11.8" Max Turning Dia meter-9.4" Max Machining Length-9.06" 4.72" Distance Between Spindles-42.9" Main Motor-15 HP. Spindle Speed-40- 4000 RPM, Tools 12(2 Turrets) Spindle Bore(Left/ Right)2.0" Spindle Nose-A2-6, X-Axis Travel(Left/ Right)7.3" 8.9" Z-Axis Travel(Left/ Right)10.8" 32.3" Machine Weight-16.060 lbs Price: $38.700.00 F.O.B. Detroit. MI For More Information Please Call Maury Cohn 1 800 888 4312 OKUMA.HAAS,MAKINO,BRIDGEPORT,CNC,FADAL
|
|
|
1996 Yang ML 25A CNC Lathe w/Fanuc OT Control
1996 YANG ML-25A Featuring a FANUC O-T Control Machine Specifications SWING OVER BED.21.65" MAX. TURNING DIA.11.02" MAX. TURNING LENGTH.20.47" DISTANCE BETWEEN CTRS.23.62" BED SADDLE ANGLE.45 degrees Z AXIS TRAVEL.20.5" Z AXIS SERVO MOTOR.2.4 HP Z AXIS RAPID TRAVERSE.4.31"MIN. X AXIS TRAVEL.8.5" X AXIS SERVO MOTOR.1.2 HP X AXIS RAPID TRAVERSE.4.31"MIN. SPINDLE.2.03" BORE SPINDLE SPEED.4500 RPM AC SPINDLE MOTOR.20 HP 10" KITAGAWA 3 JAW CHUCK CHIP CONVEYOR DIMENSIONS 124" X 74" X 80" WEIGHT 11500#S Questions: Please contact Robby@ 714-892-9800 or Shipping Quotes: Tim@ 541-690-3408 or
|
|
|
Doosan Puma 400B CNC Turning Center Lathe Fanuc 21iTB Tailstock 50hp 2007 Daewoo
2007 Doosan Puma 400B CNC Turning Center with 4.62" inch bar capacity and 18" Chuck Specifications: Control.Fanuc 21iT-B Max. Swing Over Bed. 30.3" Max. Swing Over Carriage. 23.2" Distance Between Centers. 44.7" Max. Turn Dia. 21.7" Max. Turn Length. 41.4" Spindle Nose. A2-11 Chuck Size. 18" Bar Capacity. 4.62" Spindle Bore. 5.20" Spindle Motor. 50 HP Spindle Speed. 2.000 RPM Max. Spindle Torque(30 Min. Rating) 2.419 Ft.Lbs. Turret Positions. 12 Tailstock Spindle Taper.
|
|
 |