|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$84.42 Shipping Condition: Brand New Location: Rowville, Australia JOHN DEERE 2550 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2660 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2230D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia You are buying one pair 2" wheel spacer suitable for KUBOTA BX22 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc ... moreplate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX23 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX23 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2370 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2200 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2670 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX22D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2660 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2370 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2360 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX22D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX24D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX1500 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX22 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX1860 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2350D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX80 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX1800D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2380 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX1830 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2200 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2200D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX23D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2350 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2230 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX22D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2670 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2350 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2680 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2200 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX1850 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2200 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX22D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2660 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX24D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2200D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX23D rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX80 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2230 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX1860 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX22D front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX80 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$84.42 Shipping Condition: Brand New Location: Rowville, Australia JOHN DEERE 2750 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia JOHN DEERE X595 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX23 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia JOHN DEERE 1026R rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange ... moreand a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX1850 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$77.92 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX23 rear wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers ... morewith a hub flange and a centric lip which carries the weight of the tractor.
Buy It Now
$64.94 Shipping Condition: Brand New Location: Rowville, Australia KUBOTA BX2230 front wheels. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled ... morespacers with a hub flange and a centric lip which carries the weight of the tractor.
|
|
|
|
Cincinnati Hawk 150 CNC Turning Center Lathe Fanuc Control Tailstock 2 inch bar
1998 Cincinnati Hawk 150 CNC Turning Center w/ Tailstock Specifications: Control. Acramatic 2100 Control Max Swing. 15.75" Max Turning Dia. 9.45" Chuck Size. 8" Bar Capacity. 2.0" Spindle Bore. 2.42" Spindle Nose.A2-5 Spindle Motor. 10 HP Spindle Speeds. 5.500 RPM Turret Stations. 12 Tailstock Quill Dia. 2.56" Tailstock Stroke. 3.94" X Axis Travel. 8.45" Z Axis Travel. 17.32" Overall Dims(Approx. 92.5" x 59" x 63" Machine Weight(Approx. 6.200 Lbs. Equipped With: Acramatic 2100 PC Based Control 8" 3-Jaw Chuck Programmable Tailstock Chip Conveyor Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machin
|
|
|
Kia KT-20S CNC Turning Center Lathe Fanuc OT Control Tailstock 8" 3-Jaw Chuck 92
1992 Kia KT-20S CNC Turning Center Specifications: Control. Fanuc OT Max Swing. 15.75" X-Axis Travel. 7" Z-Axis Travel. 20.47" Bar Capacity. 2.06" Spindle Bore. 2.24" Spindle Nose.A2-6 Spindle Motor. 10 HP Spindle Speeds. 4000 RPM Turret Stations. 12 Equipped With: Fanuc OT Control 8" 3-Jaw Chuck Tailstock Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods ... moreinclude wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All item
|
|
|
HYUNDAI / KIA CNC TURNING CENTER "NEW IN 2005" "GORGEOUS"
GREETINGS. I HAVE TWO KIA CNC TURNING CENTERS. THIS PRICE IS FOR ONE. THEY ARE TWIN BROTHERS THOUGH. 20HP,12 POSITION TURRET,TOOL SETTER, PARTS CATCHER, FANUC CONTROL AND NEW IN 2005. THESE TWO MACHINES ARE GORGEOUS. CALL ME IF YOU ARE INTERESTED OR E-MAIL ME. THANKS GREG PLEASE NOTE: LOADING UNTO A TRUCK WILL COST 1200 UNLESS YOU BUY THE PAIR. THEN THEY WILL LOAD BOTH FOR THE SAME MONEY. I HAVE A VIDEO IF YOU WANT TO SEE IT RUN. IT IS NICE.
|
|
|
Mazak SQR-200 Super Quadrex 200 2 turret Lathe CNC turn center 4 axis Nice 2002
2002 Mazak SQR-200 Super Quadrex 4-Axis Cnc Turning Center Machine was Working till removed from facility. Now placed at storage. Comes with Turbo chip Conveyor& Manuals(software) Buyer's are encourage to setup viewing prior to bidding/buying MAIN STYLES: BAR. CHUCKER, UNIVERSAL OPERATION TYPE: CNC CNC TYPE: Mazatrol PC Fusion MAIN SPINDLE DIRECTION Horizontal, TURNING DIAMETERS NOMINAL: 11.000" MAXIMUM: 14.000" TURNING LENGTHS NOMINAL: MAXIMUM: 24.000" OPTION: 41.250 MAXIMUM SWING 23.000" CHUCK DIAMETER STANDARD: 8.000" MAXIMUM: COLLET TYPE/CAPACITY- BAR CAPACITY STANDARD: 2.000" MAXIMUM: WORK SUPPORT COMPONENTS MULTI-SPINDLE: No NUMBER OF MAIN SPINDLES: 1 HEADSTOCK- SPINDLE 1 NOSE: A2-6 BORE: 2.400" SPEED: 5000 RPM DRIVE MOTOR(HP) 30.0 RANGE: 1 INDEX INCREMENT(degrees) TAILSTOCK AVAILABILITY Standard, ... moreQUILL DIAMETER 3.940" QUILL STROKE 3.940" QUILL CENTER MT#4 BODY TRAVEL STD: 20.500" BODY TRAVEL MAX: 35.625" TOOLING/ WEIGHTS/ MEASURES TOOLING PRIMARY SECOND TYPE Upper Turret Lower Turret MAX. NUMBER OF TOOLS TURNING 12 8 TOOL SHANK SIZE(inches) SQUARE 1.000" 1.000" ROUND 1.500" 1.500" ON-CENTER MILL DRILL None, WITH'C' AXIS None, OFF-CENTER MILL DRILL None, WITH'Y' AXIS None, MAX. NUMBER OF SIMULTANEOUS CUTTING TOOLS: 2 MACHINE NET WEIGHT(pounds)14586 FLOOR LAYOUT: LENGTH: 130" WIDTH: 80" HEIGHT: 81" AXIS SPECIFICATIONS Std. No. Axes: 4 AXIS TRAVEL TRAVERSE RATE FEED RATE X1(Std. 7.500 Inch, 1181 IPM, Z1(Std. 25.500 Inch Max: 42.750 Inch, 1181 IPM, X2(Std. 5.875 Inch, 1181 IPM, Z2(Std. 24.875 Inch Max: 36.375 Inch, 787 IPM, Specifications subject to final verifications. Buyer will be responsible for pickup/Freight/Customs duties- Loading fees $400. Payment with Wire transfer/ bank deposit or certified check prior to shipment. Tax will apply to Canadian Buyer. AS IS. WHERE IS" No Warranty No Returns!Final Sale.
|
|
|
Milltronics ML-26 CNC Flatbed Lathe Turning Tailstock Centurion 7200 12 position
2008 Milltronics ML-2640 CNC Lathe w/ tailstock and 12 Station Turret Specifications: Control. 7200 CNC X-Axis Travel. 13" Z-Axis Travel. 42" Swing Over Bed. 27" Spindle Nose. A1-8 Spindle Bore. 3.22" Spindle Speed. 40-2000 RPM Spindle Motor. 24/15 HP Spindle Torque. 420 ft-lbs Tailstock Quill Travel. 6" X& Z Axis Rapid Traverse Rate. 500 IPM Turret Stations. 12 Positions Tooling Size. 1.5" Machine Dimensions. 126"L x 84"D x 83" H Machine Weight. 9.500 LBS Equipped With: 7200 CNC Control LCD Display 12 Station Turret Manual 12" 3-Jaw Chuck Dual Electronic Hand Wheels Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There ... moreis a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are
|
|
|
Milltronics ML-22 CNC Flatbed Lathe Turning Tailstock Centurion 7 12 station 12"
2004 Milltronics ML-22 CNC Lathe w/ tailstock and 12 Station Turret Specifications: Control. Centurion 7 X-Axis Travel. 13" Z-Axis Travel. 63.5" Swing Over Bed. 23" Spindle Nose. A1-8 Spindle Bore. 3.22" Spindle Speed. 40-2000 RPM Spindle Motor. 24/15 HP Spindle Torque. 340 ft-lbs Tailstock Quill Travel. 6" X& Z Axis Rapid Traverse Rate. 500 IPM Turret Stations. 12 Positions Tooling Size. 1.5" Machine Dimensions. 143"L x 83"D x 83" H Machine Weight. 10.000 LBS Equipped With: Centurion 7 Control LCD Display 12 Station Turret Manual 12" 3-Jaw Chuck Dual Electronic Hand Wheels Work Lamp Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing ... moreInformation: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared
|
|
|
Mazak Quick Turn 15N CNC Chucking Lathe, QT15N
Used QT15N with the Mazatrol T32B controller. Does have a turret lock issue where the turret randomly stops with the tool low to the center line; we have replaced encoder and all prox. switches. Rigging and shipping the buyers responsibility. Being taken out of service the week of 7/14. Seller reserves the right to cancel listing because unit is for sale locally.
|
|
|
1999 KRAMATORSK 145" X 630" HEAVY-DUTY CNC LATHE TURNING CENTER. 4-WAY SYSTEM
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! 1999 Kramatorsk 145" x 630" Heavy-Duty CNC Lathe Description: You won't find a machine like this anywhere! Monster 145" Swing X 630" Between centers. This is a complete machine and was retrofitted in 2004 with dual Fanuc 180i-T Controls. Dual carriage. 4-Box Ways system, Meehanite castings, Dual 4-Jaw Chucks, mulitple steady rests with hard& bearing rollers. Manufactured in Ukraine in 1999. Load detecting tailstock. A whopping 100 Metric ton(220.462 lb) part capacity. 150HP Motor and much more. This machine just recently came into our warehouse in Montebello. CA on 7/1 and is currently disassembled and ready for shipment. The machine can be inspected at any time. We are the owners of this piece of equipment. This machine was purchased new for around ... morethe 3-million mark in 1999. Please contact us with any questions or interest in the machine Check out the video below of the machine under power Kramatorsk 145" x 630" Heavy-Duty CNC Lathe Manufacturer: Kramatorsk Model: K3TC KK:16264 02 S/N: 22446087 OC MAO Year: 1999 Specifications: Max Swing over bed 145" Max Turning diameter w/ bypass 144" Max Part Diameter 145" Max part diameter over cross Slide 102" Max Distance between centers 630" Max weight of workpiece w/ tailstock support 100 Metric Tons(220.462 lbs) Max weight of workpiece without tailstock support 30 Metric Tons(66.138 lbs) Limits on longitudinal feed of support(1st gear) 01" 62" IPR Limits on longitudinal feed of support(2nd gear) 002" 12" IPR Rapid travel speed of supports& tailstock 141 IPM Max Tool Size 2.5" x 3.14" Max displacement of the cutter 488" Left) 456" Right) Accuracy of processed surfaces 0.00098" Accuracy of the cross-sectional diameter.000098" Accuracy of the longitudinal diameter.0025" Straightness of end face. 500mm length.0015" Surface Roughness 0.00006" Positional Accuracy Z-axis 0.0098"
|
|
|
Doosan Puma 400B CNC Turning Center Lathe Fanuc OiT-D Tailstock 50HP 2013 Daewoo
2013 Doosan Puma 400B CNC Turning Center with 4.62" inch bar capacity and 18" Chuck Specifications: Control. Fanuc OiT-D Max. Swing Over Bed. 30.3" Max. Swing Over Carriage. 23.2" Distance Between Centers. 44.7" Max. Turn Dia. 21.7" Max. Turn Length. 41.4" Spindle Nose. A2-11 Chuck Size. 18" Bar Capacity. 4.62" Spindle Bore. 5.20" Spindle Motor. 50 HP Spindle Speed. 2.000 RPM Max. Spindle Torque(30 Min. Rating) 2.419 Ft.Lbs. Turret Positions. 12 Tailstock Spindle Taper.
|
|
|
Mazak Integrex 400SY CNC Lathe w/ B, C, and Y Axes, 15" Chuck, 12" Sub Spndl,
Please see info below and photos on a really nice Mazak Integrex 400 SY CNC Lathe with Live Tooling. Sub Spindle, C-Axis, A-Axis, B-Axis, and Y-Axis! This really nice machine has only cut aluminum and it is in really nice shape. This machine is equipped with a 15" 3-Jaw Hyraulic Chuck for the Main Spindle and a 12" 3-Jaw Hydraulic Chuck for the Sub Spindle. It is really rare to find this large of a machine on the market with Live Tooling. It is under power in Cincinnati, OH and is available to show to you This machine will make someone an excellent machine. I do have the ability to load this on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. MAZAK INTEGREX 400 SY CNC TURNING/MILLING CENTER Model Integrex ... more400SY. S/N 149186, New 2000 MACHINE DECRIPTION: The Mazak Integrex 400SY Turn/Mill Center is a Turning Center which is Capable of Multiple Machining Processes. Such as End Milling, Face Milling, Drilling, and Tapping, as well as Turning. EQUIPPED WITH: Mazak Mazatrol Fusion 640MT CNC Control. RS-232 Port, 20 Station Automatic Tool Changer, 15" 3-Jaw Chuck on Main Spindle, 12" 3-Jaw Chuck on Sub-Spindle, Automatic Tool Eye, Full C,B,A,Y Axis, Arrange for Thru Spindle Coolant(Missing Thru Spindle Coolant Sytem) Chip Conveyor, Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over the Slant Bed. 24.02" Cross Travel(X-Axis) 22.83" Maximum Machininable Length. 40.08" Turret Slide(Y-Axis) 8.27" Tool Changer Capacity. 20 Total. Rotary Tool Spindle. 20 HP. Rotary Tool Spindle Speed Range. 35-6000 RPM. Hole Thru Spindle. 4.5" Main Spindle Horsepower. 40 HP. Main Spindel Speed Range.
|
|
|
Haas SL-10T CNC Turning Center Lathe Tailstock 5C Collet 3 Jaw Chuck 2007
2007 Haas SL-10T CNC Turning Center w/ Tailstock Specifications: Control. Haas Swing Over Front Apron. 16.25" Swing Over Cross Slide. 8" X-Axis Travel. 6.25" Z-Axis Travel. 14" Rapid Traverse Rates. 710 IPM Chuck Size. 6" Max Bar Capacity. 1.75" Dist. Between Centers. 16.5" Max Turning Dia. 10" Max Turning Length. 14" Spindle Speeds. 6.000 RPM Spindle Torque. 75@ 1.300 RPM Spindle Motor. 15 HP Spindle Bore.
|
|
|
1997 Mori Seiki DL 20 Twin Spindle Lathe FANUC 16T CNC Control. Turret
1997 Mori Seiki DL 20 Twin Spindle Lath e( FANUC 16T) CNC Control. Max Diameter Bar Capacity-2" 1.63" Max Swing Over Bed-11" 11.8" Max Turning Dia meter-9.4" Max Machining Length-9.06" 4.72" Distance Between Spindles-42.9" Main Motor-15 HP. Spindle Speed-40- 4000 RPM, Tools 12(2 Turrets) Spindle Bore(Left/ Right)2.0" Spindle Nose-A2-6, X-Axis Travel(Left/ Right)7.3" 8.9" Z-Axis Travel(Left/ Right)10.8" 32.3" Machine Weight-16.060 lbs Price: $38.700.00 F.O.B. Detroit. MI For More Information Please Call Maury Cohn 1 800 888 4312 OKUMA.HAAS,MAKINO,BRIDGEPORT,CNC,FADAL
|
|
|
SHARP 1118H HIGH PRECISION CNC TOOLROOM METAL LATHE NO RESERVE! FREE SHIPPING!
FREE SHIPPING and NO RESERVE ON THIS MACHINE! Needs work. But this model sells for over $55,000.00 New! High Bidder Wins It. NO RESERVE! You are looking at a Sharp 1118H CNC Lathe. With Anilam CNC Control, that needs some work to get running, or you could do a complete rebuild to make it like new. This machine sells new for over $55,000.00, so get one heck of a deal here! This could be an excellent machine with some time and effort, and save a heck of a lot of money compared to buying a new one! The machine was running when we were going to start working on it. There was one error that came up on the control, that said"Tail Over Travel" I am thinking that it was a limit switch or something sticking. The machine had been painted at one time, so we were going to strip it down, paint it, and start from the ground up. And just do not ... morehave the time to complete it. So we are selling on here at no reserve, someone who has some time could turn this in to a great machine, at a fraction of the new price! Here are the known issues: not guaranteed this is everything. But all that we found, and we are competent machine service techs) 1. Machine needs painted back to the original color 2. There was an alarm coming up in the control. Tail Over Travel) 3. Lubrication pump mounting bracket was broken 4. Turcite B on cross slide needs re-glued or replaced 5. Spindle encoder belt missing. Needs replaced 6. Some panels/parts have been removed and sandblasted. Need repainted and reinstalled That is everything that we have found. Like I said it is no guarantee, and the machine is sold as it, but that is an honest assessment, and everything that we could find. This machine is sold as is. And you are more than welcome to come look at it before you bid, no problem at all there. We are located at: Quality Machine Tools 701 Parkway View Drive. Pittsburgh. PA 15205 Ph# 412-787-2876 if you have any questions. Or email us Someone could have a very nice machine here with some work. And save a ton of money over the cost of a new machi
|
|
|
1996 Yang ML 25A CNC Lathe w/Fanuc OT Control
1996 YANG ML-25A Featuring a FANUC O-T Control Machine Specifications SWING OVER BED.21.65" MAX. TURNING DIA.11.02" MAX. TURNING LENGTH.20.47" DISTANCE BETWEEN CTRS.23.62" BED SADDLE ANGLE.45 degrees Z AXIS TRAVEL.20.5" Z AXIS SERVO MOTOR.2.4 HP Z AXIS RAPID TRAVERSE.4.31"MIN. X AXIS TRAVEL.8.5" X AXIS SERVO MOTOR.1.2 HP X AXIS RAPID TRAVERSE.4.31"MIN. SPINDLE.2.03" BORE SPINDLE SPEED.4500 RPM AC SPINDLE MOTOR.20 HP 10" KITAGAWA 3 JAW CHUCK CHIP CONVEYOR DIMENSIONS 124" X 74" X 80" WEIGHT 11500#S Questions: Please contact Robby@ 714-892-9800 or Shipping Quotes: Tim@ 541-690-3408 or
|
|
|
Doosan Puma MX-2600ST CNC Multi Axis ATC Milling and Turning Center B axis 2012
2012 Doosan Puma MX-2600ST Specifications: Control…Fanuc 31i-A Max Turn Diameter(Main)Left Max Swing Over Bed. 39.3” Max Turn Length. 60.6” Distance Between Noses. 72.2” Spindle Nose.A2-8 Spindle Bore. 3.38” Left Spindle DrawTube ID. 3.03” Right Spindle DrawTube ID. 2.95” Spindle Speed. 4.000 RPM Spindle Motor. 35 HP Main/Sub C Axis Pos. 0.001 Degrees Turrets Positions(Upper/ Lower) 40 ATC/ 12 Stations Rotary Tool Speed(Upper/ Lower)12.000/ 4,000 RPMs Machine Weight. 28.200 Lbs Equipped With: 10” Kitagawa 3 Jaw Chuck On Main Automatic Tool Setter Turbo Side Discharge Chip Conveyor Automated Part Unloading System Y Axis with 9.05” of Travel 12.000 RPM Milling Head with B Axis 40 Position Automatic Tool Changer Live Tooling on the Sub Turret Tool Monitoring System Spindle Chillers Full C Axis on the Main and Sub Only 300 Hours on this machine! ... moreLots Tooling Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before pu
|
|
|
MAZAK QUICK TURN 250 CNC 2-AXIS SLANT BED LATHE - NEW 2001
2001 MAZAK QUICK TURN 250 CNC 2-AXIS SLANT BED LATHE MAZATROL 640T PC FUSION CNC CONTROL w/ COLOR DISPLAY CHUCK SIZE: 8" BAR CAPACITY: 2" MAX. SWING: 23.6" TURNING DIAMETER: 15.7" TURNING LENGTH: 19.7" SPINDLE SPEED: 5000 RPM MAIN POWER MOTOR: 20-HP PROGRAMMABLE TAILSTOCK 12- STATION BI-DIRECTIONAL TURRET TOOL PRESETTER KITAGAWA 3-JAW CHUCK COOLANT SYSTEM MISC: TURRET TOOLING HOLDERS FOR MORE INFORMATION CONTACT GARY@949-246-2978 or email: gary@ptsmachinery.com
|
|
|
TAKISAWA MODEL TC-10 CNC LATHE - NEW 2000 MFG IN JAPAN
2000 TAKISAWA MODEL TC-10 CNC TURNING CENTER(MADE IN JAPAN) FANUC 21T CNC CONTROL w/ RS-232 PORT TRAVELS: X-AXIS: 4.75" Z-AXIS: 9.84" MAX SWING: 12.59" TURNING DIAMETER: 8.6" RAPID TRAVERSE: 785 IPM SPINDLE SPEEDS: 60-6000 RPM, SPINDLE BORE: 2.0" SPINDLE BAR CAPACITY: 1.650" SPINDLE MOTOR: 7.5/10-HP 5C COLLET NOSE, A2-6 SPINDLE NOSE, 6" CHUCK CAPACITY 12-STATION TURRET BI-DIRECTIONAL, TAILSTOCK, PARTS CATCHER COOLANT SYSTEM AND OPERATION MANUALS. CONTACT GARY@949-246-2978 or email: gary@ptsmachinery.com for more information.
|
|
|
Doosan Puma 400B CNC Turning Center Lathe Fanuc 21iTB Tailstock 50hp 2007 Daewoo
2007 Doosan Puma 400B CNC Turning Center with 4.62" inch bar capacity and 18" Chuck Specifications: Control.Fanuc 21iT-B Max. Swing Over Bed. 30.3" Max. Swing Over Carriage. 23.2" Distance Between Centers. 44.7" Max. Turn Dia. 21.7" Max. Turn Length. 41.4" Spindle Nose. A2-11 Chuck Size. 18" Bar Capacity. 4.62" Spindle Bore. 5.20" Spindle Motor. 50 HP Spindle Speed. 2.000 RPM Max. Spindle Torque(30 Min. Rating) 2.419 Ft.Lbs. Turret Positions. 12 Tailstock Spindle Taper.
|
|
|
EXCEL BIG BORE 12" CHUCK SL-400/1000 CNC TURNING CENTER
EXCEL SL-400/1000 Machine is in great condition on our floor in Cleveland VIDEO; TOOLING. DOCUMENTATION. RS232 COMMUNICATION. CHIP CONVEYOR. COOLANT PAN AND PUMP. Call 216 470 0270 for more information Machine weighs 12.000 lbs WE WILL LOAD FOR FREE Ships worldwide(any prep is at buyers expense) PLEASE CONTACT SELLER PRIOR TO PAYMENT! PAY BY WIRE TRANSFER
|
|
|
Star SV-32J CNC Swiss Type Turning Center Lathe Fanuc 18iT Sub Spindle Y Axis 98
1998 Star SV-32J CNC Swiss Type Turning Center with Sub Spindle Specifications: Control. Fanuc 18i-T Max. Machine Diameter. 1.25" Max.Headstock Stroke. 12.2" Number of Tools. 8 Number of Tools(Front) 4 Number of Tools(Rear) 2 Number of Tools(Rotary) 4 Main Spindle Speed. 7.000 RPM Main Spindle Motor. 10 HP Main Spindle Indexing. 15 Degree Sub Spindle Speed. 7.000 RPM Sub Spindle Motor. 5 HP Sub Spindle Indexing. 15 Degree Power Driven Attachment Spindle Speed. 5.000 RPM Power Driven Attachment Motor. 1.6 HP Ra
|
|
|
2003 Hwacheon Hi-Eco 45 CNC Turning Center
Video- copy the following video id: cfdzqqbbidi then go to youtube and paste that id into the search field 2003 Hwacheon Hi-Eco 45 SPECIFICATIONS Swing 31.5" Between Centers 78.7" Maximum Turning Dia. 24.8" Spindle Bore 5.2" Bar Capacity 4.6" Spindle Motor 50 hp. Spindle Speed Range 15- 1.200 rpm Tailstock Quill Dia/Tvl/Tpr 3.94" 3.94"MT#5 Machine Weight 33,000 lbs. Equipped With: 15" 3 Jaw Hydraulic Chuck; Chip Conveyor; Assorted Turret Tool Holders; Manuals Operating Time- 4607 hrs. Cutting Time- 2,767 hrs. Specifications are Estimates and Subject to Change. Machine is fully operational and in service and can be viewed by appointment only. All prices are quoted FOB: seller's floor unless specified otherwise. STANDARD TERMS AND CONDITIONS OF SALE Machines are subject to seller's terms& ... moreconditions below and notes: The goods sold are second hand goods and seller therefore makes no warranty of any kind. And sells goods"As is, As inspected, And"With all faults. And makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. Seller disclaims any reliance by buyer on seller's skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. Buyer acknowledges that specifications shown are those provided by OEM and may have been altered or modified since original purchase. TERMS: All payments must be received within 10 business days and prior to shipment of machine. All sales are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: Please Do Not Pay until you have received our invoice. Payments by company check will be held for 10 business days until check clears. Seller accepts money or
|
|
|
Hitachi Seiki HT 20S II CNC Turning Center LNS barfeed Tailstock Fanuc OT 1993
1993 Hitachi HT-20S II CNC Turning Center with Tailstock and LNS Hydrodynamic Barfeed Specifications: Control. Fanuc OT Max. Swing. 18" Max. Turn Dia. 8.26" Max. Turn Length. 15" Spindle Nose. A2-6 Bar Capacity. 2" Spindle Bore. 2.3" Spindle Motor. 20 HP Spindle Speed. 5.000 RPM Turret Positions. 12 Rapids( X/Z) 984/1181 IPM Weight(Approx) 10.000 Lbs. Equipped With: Fanuc OT Control 16C Collet Chuck Tool Presetter 12' LNS Hydrodynamic Barfeed Tailstock All Available Tool Holders All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down ... morefrom ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer ve
|
|
|
Hitachi Seiki HT 20J CNC Turning Center LNS barfeed Tailstock Seicos J 20HP 1998
1998 Hitachi HT-20J CNC Turning Center with Tailstock and LNS Hydrodynamic Barfeed Specifications: Control. Seicos J(Yasnac J300 based) CNC Control Max. Swing. 17.7" Max. Turn Dia. 10" Max. Turn Length. 15.7" Spindle Nose. A2-6 Chuck Size(Not Included) 8" Bar Capacity. 2" Spindle Bore. 2.3" Spindle Motor. 20 HP Spindle Speed. 5.000 RPM Turret Positions. 12 Rapids( X/Z) 787/945 IPM Weight(Approx) 10.000 Lbs. Equipped With: Seicos J(Yasnac J300 based) CNC Control 16C Collet Chuck Programmable Tailstock 12' LNS Hydrodynamic Barfeed Parts Catcher Tool Presetter Chip Conveyor Misc. Tool Holders RS-232 Port Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: ... moreThere is a strong chance that this item may sell locally at our facility before
|
|
|
Daewoo Doosan Lynx CNC Turning Center Lathe Fanuc 21iT Tailstock Part Catcher 98
1998 Daewoo Doosan Lynx 220A CNC Turning Center with Tailstock Specifications: Control: Fanuc 21iT Swing Over Bed: 20.1” Max Turning Length: 12.7” Maximum Turn Diameter: 11” Bar Capacity: 1.81” Spindle Bore.2.08" Spindle Nose: ASA A2-5 Spindle Motor.10 HP Spindle Speeds: 6.000 RPM Number of Turret Positions: 12 Floor Space(L x W) 64” x 63” Machine Weight: 7.700 Lbs Equipped With: Fanuc 21IT Chip Conveyor Parts Catcher All Available Tool Holders All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! ... moreSpecifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to p
|
|
|
Hitachi Seiki 5NF-800 CNC Turning Center 15.00" Chuck Tailstock
HITACHI SEIKI 5NF-800 CNC TURNING CENTER GENERAL SPECIFICATIONS: INSTALLED NEW 1984 MAXIMUM SWING 26.75" MAXIMUM CUTTING LENGTH 31.5" X AXIS TRAVEL 11.5" Z AXIS TRAVEL 32.25" RAPID TRAVERSE RATE X AXIS 200 IPM RAPID TRAVERSE RATE Z AXIS 400 IPM SPINDLE SPEEDS 20- 1800 RPM SPINDLE MOTOR 42 HP SPINDLE NOSE A2-11 SPINDLE BORE 5.03" BAR CAPACITY 4.0" TURRET CAPACITY 10 STATIONS TAILSTOCK TAPER MT#4 TAILSTOCK QUILL TRAVEL 4.0" TAILSTOCK QUILL DIAMETER 4.5" APPROX. DIMENSIONS 165" x 92" x 96" MACHINE WEIGHT(APPROX) 16.000 LBS EQUIPPED WITH: FANUC 6TB CNC CONTROL WITH 9" MONOCHROME CRT RS-232C PORT INTERFACE FOR DNC OPERATION 15" HYDRAULIC THROUGH HOLE CHUCK WITH JAWS SPINDLE LOAD METER.SPINDLE SPEED METER HYDRAULIC TAILSTOCK W/PROGRAMMABLE QUILL RIGHT SIDE DISCHARGE LIFT-UP TYPE CHIP ... moreCONVEYOR STANDARD COOLANT SYSTEM WITH TANK AND PUMP ALL AVAILABLE TOOL HOLDERS& MACHINE MANUALS AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE ON OUR WAREHOUSE FLOOR IN KENOSHA. WISCONSIN ZIP CODE 53144. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. CALL OR EMAIL US YOUR ZIP CODE IF YOU WOULD LIKE A SHIPPING RATE. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can em
|
|
|
Haas SL-30T CNC Turning Center Rigid Tap Gear BoxTailstock 10.00" Chuck
HAAS SL-30T CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 5/2006 SWNG OVER FRONT APRON 30" SWING OVER CROSS SLIDE 14.5" DISTANCE BETWEEN CENTERS 39" X AXIS TRAVEL 11.3" Z AXIS TRAVEL 34" RAPID TRAVERSE RATE ALL AXES 710 IPM SPINDLE NOSE A2-8 SPINDLE SPEEDS 3400 RPM SPNDLE BORE 3.5" MAX. BAR CAPACITY 3.0" SPINDLE MOTOR 30 HP TURRET CAPACITY 12 STATIONS TAILSTOCK TAPER MT#4 TAILSTOCK STROKE 33.5" APPROX. DIMENSIONS 147" x 77" x 75" MACHINE WEIGHT(APPROX) 16.000 LBS EQUIPPED WITH: HAAS 32-BIT CNC CONTROL WITH 14" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 10" 3-JAW HYDRAULIC THROUGH HOLE CHUCK RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) 1MB. MEMORY, HIGH INTENSITY LIGHTING HYDRAULIC FULLY PROGRAMMABLE TAILSTOCK FLOPPY DISK DRIVE, GEAR BOX. RIGHT SIDE DISCHARGE ... moreLINK BELT TYPE CHIP CONVEYOR FULLY ENCLOSED SPLASH GUARDING. ALL AVAILABLE TURRET TOOLING& MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE. PLEASE PROVIDE US WITH YOUR ZIP CODE. AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions o
|
|
|
Mori Seiki ZL-15S CNC Lathe
Stock Number Model ZL-15S, Age Chuck Size 6" 3 JAW CHUCK, Swing Distance Between Centers Upper Turret Tools 12 Position, Lower Turret Tools 8 Position, Control Fanuc 0 TT, Equipped With. CHIP CONVEYOR, COOLANT SYSTEM, FOOT PEDAL, BUYER IS RESPONSIBLE FOR ALL SHIPPING. Mori Seiki. Okuma, Fanuc, Mazak, Matsuura, Daewoo, Doosan, Miyano, Kitamura, Nakamura. DMG. Deckel Maho Makino, Howa, Tree, Victor, Supermax, Haas, Bridgeport. Amera, Yam, Leadwell, Hardinge, Johnsford, Hitachi, Takisawa, Kia. Emco Maier, Clausing, Toshiba, Hwacheon, Tsugami, Romi, Okada, Wasino, Femco. Chevalier, Sharp, Yang, Ikegai, Chiron, Fadal, Mitsui, Hyundai, Cincinnati. OKK, Toyoda, Topper, Enshu, Dixi, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1473cb688f2-0x114-
|
|
|
Bridgeport Romi EZ Path CNC Manual Teach Lathe Turning Center 8" Aloris '94
1994 Bridgeport Romi EZ-Path CNC/Manual Lathe w/ Tailstock and Aloris Tool Post Specifications: Control.Bridgeport EZ Trak DX Swing Over Bed. 16.5" Rapid Traverse Rates.250 IPM Chuck Size. 10" Tailstock Quill Diameter. 2” Tailstock Quill Travel. 6.3” Tailstock Taper.MT#4 Dist. Between Centers. 40" Spindle Speeds. 35-3.000 RPM Spindle Motor.8 HP Spindle Bore. 1.97" Machine Weight.4.000 Lbs Equipped With: Bridgeport EZ Trak DX Control 8" 3-Jaw Chuck Tailstock Aloris Tool Post All available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. ... morePlease verify it’s availability before purchasing
|
|
|
CNC Metal Lathe 13"x40" Bolton Tools GSK 980TDb High Precision Industrial 100hr
Industrial CNC Lathe High Precision 13 x 40" Bolton Tools BT6132 GSK980TDb Metal Used. From local manufacturing company. Purchased new in 2012. In good working condition- used less than 100 hours! No guarantees and no returns, so bid accordingly. Potential buyers are welcome to come inspect item or have someone else do so at your own cost during business hours- Mon-Thurs. 7am-4pm in Meadowview, Virginia. You may choose local pickup or message me for a freight quote(be aware this beast is nearly 3000 lbs) Pickup is required within 10 days. $500 non-refundable Paypal deposit is required to hold until pickup if not picking up within 3 days(will be deducted from final cost upon pickup) Pickup during regular hours only as listed above. Unless agreed upon BEFORE auction closes. Cash or Money order from an approved bank ONLY. Please message ... moreme with any questions you may have prior to bidding. More pictures available upon request. Brand: Bolton Tools Model: BT6132 with GSK 980 TDb Info from Bolton website: GSK 980TDb Servo motor CNC control. Manual machining function Teach and playback programming Full G-code CNC capability Auto spindle jog during gear changes Vector control spindle drive Simultaneous multiple M-codes(up to 3) Feedrate override:0-120% Spindle override:0-120% Animatde tool path graphics RS-232 serial port Backlash error compensation Ballscrew pitch error compensation Run-time/Part-count display Ballscrew pitch error compensation Primary CNC M-code controllde Power contactor Secondary CNC M-code controlled SPECIFICATIONS: Swing over bed: 12 9/16" Swing over carriage: 5 7/8" Distance between centers: 39 3/8" Taper of barrel: MT5. Spindle hole: 1 1/2" Range of speed（variable) 100~2500r/min. Feed motor power（X/Z) 4N.M/6N.M(Servo motor) X rapid traverse: 5m/min. Z rapid traverse: 10m/min. Max. travel of X axis: 6 1/4" Max. travel of Z axis: 39 3/8" Motor power: 4 HP. Tool-post: 4 stations. Max.tool size: 5/8" x 5/8" Min input unit: 0.001mm/0.000039" Repeatabili
|
|
|
Microkinetics CNC Lathe 12x36 Turning Center with Auto Tool Changer
This is a personally owned Microkinetics CNC Lathe 12 x 36 Turning Center. It is virtually the same machine. Hardware and package available today. This machine has the very latest version of Turnmaster Pro software, which was a paid upgrade.The base price on the same exact machine brand new is $7500 barebones with no option. This machine has almost every factory option plus some that I have done. Aside from the base cnc lathe package, this machine includes the following factory options: Teco 7300 VFD with software spindle integration 5C Lever Collet Closer for 1236 Lathe AT-6 Six Tool Automatic Tool Changer AT-6 Tool Changer Riser Plate Assembly Turnmaster Pro 2013 with free upgrades This machine. If bought brand new with the options that this machine has, will cost you $13,129 before shipping. These are items that I added: ELO 15" Touch ... moreScreen Monitor with Bracket HP Pavilion Slimline PC with Win7 Logitech Wireless Keyboard Xbox360 wired controller for manual jogging of cnc Flexbar Chuckguard Spindle Enclosure with LED lighting Flood Cooling System(software controlled) with Little Giant Pump Various ATC turret toolholders All necessary adapters and wiring This machine is local pick-up only and I have no responsibility to assist in the freight process as part of the sale. I will provide certain services for a fee in addition to the sale price. This machine is not suited to palletizing as one piece. It is best removed from the stand and shipped as two shipments. Both portions can be palleted for $300. Buyer is then responsible for obtaining shipping of the crates/pallets. I will consider delivering the entire machine to you. The cost is $1.40 per one-way trip mile(minimum charge $500) as determined by Google Maps from my address to yours. This does not include set-up. If you wish me to set the machine up upon my delivery. I will do so for $500 additional. I have cut Stainless and Titanium parts with this machine by the hundreds. With very few issues. Produces accurate parts with a surprisingly excellent finis
|
|
|
2000 Doosan S390 CNC Lathe Fanuc Tailstock
Finance In Seconds Instant customer approvals– we’re talking seconds, Available 24/7- from any device, directcapital.com/ 2000 Doosan S390 CNC Lathe Fanuc 18T Tailstock Chuck Size: 12" Bar Capacity: 3.5" Axis: 2 Power: 35 hp Max RPM: 2500 Turning Dia: 15.35" Swing: 22.8" Machining Length: 30" Tailstock: Yes Control: FANUC 18T Weight: 11.000 Chip Conveyor Coolant Tank Box Ways Fanuc 18T Please Call For Inspection Maury Cohn 1 800 888 4312 HAAS.FADAL,MORI SEIKI, OKUMA, MAZAK
|
|
|
(1) USED MORI SEIKI SL-2 CNC LATHE, MFG. 1984
1) USED MORI-SEIKI SL-2 CNC LATHE NEW 1985 SPECIFICATIONS: CAPACITY/SWING OVER BED. 22.4" SWING OVER CROSS SLIDE.13.7" Z AXIS TRAVEL. 16.1" X AXIS TRAVEL. 9.4" HOLE THRU SPINDLE. 2" EQUIPPED WITH: YASNAC LX-1 CONTROL. 3 JAW CHUCK. CONTACT JEFF STERLING- JSTERLING@MACHINERYNETWORK.COM. 541-897-0794.
|
|
|
YUASA MICROSTAR-N1 CNC COMPACT PRECISION PRODUCTION / GANG LATHE - FANUC
Made by Yuasa. This is a used CNC Compact Precision Production/ Gang Tool Lathe. This machine is in an overall good looking condition. But there is one issue that is a relatively easy fix. The reference return on the X-Axis needs to be repaired or replaced. Model# Microstar-N1 Serial# 80111 Features: Fanuc Control. Coolant System. 5C Spindle Nose. Specifications: Swing Over Slide: 12" Maximum Distance Between Spindle and Slide: 10" approx. Table Dimensions: 32" x 9-1/4" X-Axis Travel: 12" approx. Z-Axis Travel: 10" approx. Motor: 3.7/ 5.5 kW. 220 Volt, 1,500/ 4,500 rpm. Electrical: 220 Volt. Three Phase. Overall Dimensions: 100" x 70" x 80" tall. Comes as shown in pictures. Please contact Henry@ 949) 923-1494 to see this machine. And with any question regarding shipping. Or questions pertaining ... moreto the piece on the machine that needs repair. This machine will not be able to be shipped until August 4th do to him needing to finish a job. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14767934dff-0x111-
|
|
|
Okuma LB-35 Super Big Bore CNC Lathe Turning Center 7" Through Hole 80" Centers
2000 Okuma LB-35II SBB/2000 CNC Turning Center with Tailstock. 7.08" Through Hole Specifications: Control. OSP U100L Max Turn Diameter. 18.11" Swing Over Ways. 27.5" Max Turning Length. 78.74" X-Axis Travel. 12.99" Z-Axis Travel. 81.49" Spindle Bore. 7.08" Spindle Nose.A2-15 Spindle Speeds. 40-1400 RPM Max Torque. 837 ft-lb Spindle Motor. 40 HP Turret Stations. 12 Machine Weight. 29.000 lbs Machine Dimensions. 231.9" L x 100.9"W x 88.4" H Equipped With: OSP U100L CNC Control 7.08" SUPER BIG BORE OPTION 18" 3 Jaw Air Chuck Tailstock Chip Conveyor 92 Gallon Coolant Tank Misc. Tool Holders All Available Manuals Please call Jason Stob 708-790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the ... morebuyer. We have the right to resell the item if it is not pa
|
|
|
Eisen CT-1118 CNC Tool Room Lathe - 2003
Manufactured Year: 2003. Swing Over Apron 11" Between Centers 18" Max Turning Diameter 6" Max Turning Length 18" Bar Stock Diameter 1/16" Chuck Size 6" Spindle Speed 4000 RPM. Spindle Motor 3 HP. Spindle Hole 1/4" Spindle Taper MT#2. X-Axis Travel 6 1/4" Z-Axis Travel 13 1/2" Rapid Traverse X. Z 787 IPM. Machine Dimensions 81" x 40" x 65" Machine Weight 2.200 lbs. Equipped With: Fanuc 0iMate-TD Control. Servo Motor Fanuc Servo Motors with Absolute Encoders. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for ... moreshipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item.
|
|
|
Haas ST-30TBB Big Bore CNC Turning Center Lathe 4 inch Bar Capacity 15" Chuck 07
2007 Haas ST-30T BB CNC Turning Center with 4" Bar Capacity Lots of Tooling Low Hours: Servo on: 5921 Motion: 832 Spindle Time: 1146 Specifications: Control. Haas Chuck Size. 15" Max Bar Capacity. 4" Max. Cutting Diameter. 17" Max. Swing. 30" Distance Between Centers. 39" Spindle Speeds. 2.400 RPM Spindle Motor. 40 HP Spindle Nose. A2-8 Turret Stations. 12 Machine Weight: 25.000 LBS Equipped With: 15" 3 Jaw Chuck 4" Big Bore Option 2 Speed Gear Box Programmable Tailstock Tool Presetter Chip Conveyor Rigid Tap Ethernet High Intensity Lighting High Pressure Coolant Quick Code Programming TONS of Tooling Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing ... moreInformation: There is a strong chance that this item may sell locally at our facility before we tak
|
|
|
1999 HAAS SL20 CNC LATHE
1999 HAAS SL20 CNC TURNING CENTER. EXCELLENT CONDITION ABSOLUTLY NOTHING WRONG. UNDER POWER RUNNING PARTS FOR INSPECTION. IT HAS THE FOLLOWING OPTIONS: Control Haas CNC Swing Over Front Apron 23" Swing Over Cross Slide 9.5" Chuck Size 8" Rapid Traverse Rate 710 ipm Max Bar Capacity 2" Distance Between Centers 24" Max. Turning Diameter 10.3" Max. Turning Length 20" Spindle Speeds 4,000 RPM Spindle Motor 15/20 HP Spindle Bore 3" Turret Stations 10 Machine Weight 9,000 lbs. Equipped with 8" chuck 1MGB OF MEMORY,TOOL PROBE, CUSTOM MACROS,RIGID TAP,QUICK CODE PROGRAMMING SERVO HRS 12818 IN MOTION HRS 2642 SPINDLE HRS 3088
|
|
|
Tool Changer for spectraLight Turning Center CNC Lathe
This is a tool changer for a Light Machines spectraLight Turning Center CNC lathe. If you are interested in other parts to this CNC we are selling them in the links below. Extra Chuck: http:cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=151368842360 CNC machine: Contoller: http:cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=151367816124&ssPageName=STRK:MESE:IT D2-3
|
|
|
1992 Citizen L-16 Type VI Swiss Type CNC Lathe w/Spego Barfeed, Live Tool
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 1992 Citizen L-16 Type VI Swiss Type CNC Lathe w/Spego Barfeed. Live Tool Ref# 152633 iammdna XSWCNC CITIZEN MODEL:L16 TYPE VI CNC SWISS TYPE AUTOMATIC LATHE NEW: 1992 SPECIFICATIONS: MAX. MACHINING DIA. ... more0.63" MAX. MACHINING LENGTH. 7.87" MAX. DRILLING DIA. 0.31" MAX. TAPPING DIA. M6 SPINDLE THRU HOLE DIA. 0.79" SPINDLE SPEED RANGE. 300-10000 RPM SPINDLE SPEED CHANGE STEPS. STEPLESS S5-DIGIT ROTARY TOOL MAX. DRILLING DIAMETER. 0.16" TOOL SPINDLE SPEED RANGE. 400-5000 RPM TOOL SPINDLE SPEED CHANGE STEPS. STEPLESS S4-DIGIT BACK SPINDLE MAXIMUM DIA. 0.63" BACK MACHINING WORKPIECE MAX. LENGTH. 2.76" BACK MACHINING WORKPIECE MAX. DRILL. 0.24" BACK MACHINING SPINDLE SPEED RANGE. 100 to 3600 RPM NUMBER OF MOUNTABLE TOOLS. 12 TOOLS SPINDLE DRIVE MOTOR. 2.2/3.3 kW EQUIPPED WITH: CINCOM SYSTEM IIC CNC CONTROL- GTF 1310 6 TOOL VERTICAL HOLDER w/ONE ROTARY TOOL- SPEGO 123-4Z BARFEED w/Z-SORB s/n:506-087- MANUALS Machine Location: HARRISON. NJ Click Here For More Citizen Machines Click Here For More Automatics- CNC SWISS TYPE MULTI-AXIS LATHES(s) Questions about this Machine? Call Mike at(800) 873-6224 ext 7540 Need a Freight rate? Call Alex. Our recommended trucking an
|
|
|
CNC LATHE DAEWOO PUMA 240, Low hours
DOOSAN Puma 240 CNC Turning Center Build year: 2006 Swing Over Bed. 20.00" Max. Turning Diameter. 13.50" Max. Turning Length. 22.00" Distance Between Centers. 25.00" Max. Bar Hole Diameter. 2.55" Spindle Speeds. 45-4500 RPM Spindle Drive Motor. AC. 25 HP Rapid Traverse, X-Axis. 945 IPM Rapid Traverse, Z-Axis. 1181 IPM Tailstock Quill Diameter. 2.95" Tailstock Bore Taper. MT#4 Tailstock Quill Travel. 3.125" Floor Space. 124" x 65" Machine Height. 69" Approximate Weight. 8000 Lbs. EQUIPPED WITH: FANUC 21i-TB CNC Control With Extended Memory 8" 3-Jaw Chuck Samchully"Powergrip" 5C Collet attachment 12-Station Turret Hydraulic Tailstock Tool Eye 145 PSI High-Pressure Coolant System Tooling Manuals
|
|
|
Daewoo Puma 400B CNC Turning Center 18.00" Chuck Chip Conveyor Tool Pre-Setter
DAEWOO PUMA 400B CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 12/2000 SWING OVER BED 28" SWING OVER CARRIAGE 18.9" DISTANCE BETWEEN CENTERS 44.7" X AXIS TRAVEL 14.3" Z AXIS TRAVEL 43.5" RAPID TRAVERSE RATE X/Z AXES 630/790 IPM SPINDLE SPEEDS 2000 RPM SPINDLE BORE 5.2" BAR CAPACITY 4.62" SPINDLE MOTOR 50 HP TURRET CAPACITY 10 POSITIONS TAILSTOCK TAPER MT#5 TAILSTOCK STROKE 39.4" APPROX. DIMENSIONS 201" x 94" x 80" MACHINE WEIGHT(APPROX) 20.000 LBS EQUIPPED WITH: FANUC 181T CNC CONTROL WITH 10" LCD SCREEN RS-232 PORT FOR DNC OPERATION 18.00" KITAGAWA 3-JAW CHUCK. CHIP CONVEYOR TWO-SPEED GEARBOX. PROGRAMMABLE TAILSTOCK FULLY ENCLOSED SPLASH GUARDING ALL AVAILABLE MANUALS AND TOOLING ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS ... moreLATHE UNDER POWER IN KENOSHA, WISCONSIN LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and we'll be happy to help. Buyer to verify all specifications and options prior to purch
|
|
|
Haas TL-15 CNC Turning Center w/ Sub Spindle Servo 300 Bar Feed Parts Catcher 01
2001 Haas TL-15 CNC Turning Center with 3" Bar Capacity. Sub Spindle, Bar Feeder, and Live Tool Specifications: Control. Haas. Swing Diameter. 23" Max. Cutting Diameter. 8.2" Max. Cutting Length. 17.5" Distance Between Centers. 12.7" Main Spindle Bar Capacity. 2" Main Spindle Bore. 3" Spindle Speeds. 4000 RPM. Spindle Motor. 20 HP. Spindle Nose. A2-6. Number of Tools. 6 VDI/ 6 BOT. Sub Spindle Speeds. 4000 RPM. Sub Spindle Bar Capacity. 1.18" Sub Spindle Motor. 8 HP. Spindle Nose. A2-5. Equipped With: Sub Spindle. Servo 300 6' Magazine Barfeed. 5C Collet Chuck for Main Spindle. Royal Accu Length 5C Dead Length Collet Chuck for Sub-Spindle. 12) VDI Tool Holders. 10) Haas Bolt on Tool Holders(BOT) Tool Presetter. Parts Catcher. Rigid Tap. 3.5" F
|
|
|
Haas HL-4 CNC Turning Center Lathe 10" Chuck Tailstock Tool Pre 3" Bar Tool Hold
1997 Haas TL-15 CNC Turning Center with 3" Bar Capacity Specifications: Control. Haas X-Axis Travel. 11.3" Z-Axis Travel. 34" Chuck Size. 10" Max Bar Capacity. 2.5" Draw Tube Bore. 3" Max Turning Dia. 14.5” Max Turning Length. 34" Spindle Speeds. 3.400 RPM Spindle Motor. 30 HP Turret Stations. 12 Machine Weight. 14.000 Lbs Machine Dimensions…135"L x 68"W x 76”H Equipped With: Programmable Tailstock 10" 3-Jaw Chuck Tool Presetter Rigid Tap Chip Conveyor Quick Code Programming 3.5" Floppy Drive Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this
|
|
|
Tornos Deco 26 SWISS CNC sliding head lathe with Tornos Robobar barloader
For immediate sale direct from high quality Swiss CNC shop in France( Haute Savoie area) Tornos Deco 26 New 1999 26mm 10 axis Run 52700 hours from new by original owner Maintained to very high standard by Tornos and the owner There are some extra tools to come including 3-4 live tools( photo shows example tools.actuals to be confirmed) So the tooling that is fitted to the machine as shown on the photos will not be available The chip conveyor system is NOT included but they have all the original Tornos tray and cover Please see machine running at: https:www.youtube.com/watch?v=l-r1AQOx7Us&feature=youtu.be This machine is in really top condition for the age and has been exceptionally well maintained from new by the current owners. We off this Swiss quality for just $ 57500 USD.or make us your best offer. We will handle all the rigging and ... morepacking and the shipping at cost. Please feel free to call Roger Roberts anytime on +44.7831.850595 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1479564026f-0x113-
|
|
|
1998 Femco HL-40 CNC Lathe Fanuc 0m,3.54" Bore,12" Chuck
1998 Femco HL-40 Fanuc 0m Control MAX TURNING DIAMETER: 19.68" NO TAILSTOCK SWING: 25.6" MAX TURNING: 17" MAX LENGTH: 39.4" Z-AXIS) 945 IPM SPINDLE MOTOR: 30 HP CHUCK: 12" APID TRAVERSE: 945 IPM HOLE THROUGH SPINDLE: 4.33" BAR CAPACITY: 3.54" TURRET: 12 POSITIONS. RUNS GREAT! QUESTIONS CALL STEVE@ 866-803-5202. SHIPPING QUOTES CONTACT
|
|
|
Dyna Myte Cnc 3000 Lathe with Dyna Control
Chuck Size 4" Machine Dimensions LxWxH 41.5"x24"x30" Machine Weight 550 lbs Quill Travel 1.8" Rapid Traverse 60" IPM Spindle Motor 1 1/4 HP DC Servo Spindle Nose/ Bore A2-4" 75" Spindle Speed 3 ranges 0-4.000 RPM Swing Over Bed 8" Swing Over Cross Slide 2.25" Tailstock Quill Dia. Center 1.4" 2 MT Turret Type 6 Pos. X-Axis Travel 2" Z-Axis Travel 12" RS232 port 900 lines of program memory English/Metric selection Auto Lubrication system Manual data input(MDI) 16 Character alpha-numeric display Automatic tool compensation Automatic Backlash compensation Absolute or incremental Built in canned cycles
|
|
|
2010 Femco HL55S-2500 CNC Turning Center
Normal 0 false false false EN-US X-NONE X-NONE Brand: Femco Model: HL55S/2500- CNC Lathe Year: 2010 Specifications are Estimates and Subject to Change. Machine is fully operational and in service and can be viewed by appointment only. All prices are quoted FOB: seller's floor unless specified otherwise. STANDARD TERMS AND CONDITIONS OF SALE Machines are subject to seller's terms& conditions below and notes: The goods sold are second hand goods and seller therefore makes no warranty of any kind. And sells goods"As is, As inspected, And"With all faults. And makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. Seller disclaims any reliance by buyer on seller's skill, or judgment to select or furnish the goods for any particular purpose, expressed ... moreor implied. Customer is responsible for all shipping& rigging costs. Buyer acknowledges that specifications shown are those provided by OEM and may have been altered or modified since original purchase. TERMS: All payments must be received within 10 business days and prior to shipment of machine. All sales are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: Please Do Not Pay until you have received our invoice. Payments by company check will be held for 10 business days until check clears. Seller accepts money orders. Bank checks, or wire transfers. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. Freight costs to be quoted at time of sale from originating zip code. Local pickup is ok. Any item not picked up within 30 days will be charged 10% of items cost per month for storage. TITLE: Title shall not pass to Buyer upon delivery of the goods. But shall remain vested in Seller until the entire purchas
|
|
|
Used Mori Seiki ZL15 SMC CNC Lathe, Live Tool Sub Spindle, Video - Detroit Area
See Video and other Mori Seiki Lathes below. Questions. Email me or call 609-403-0661. MORI SEIKI ZL-15/SMC CNC TURNING CENTER. Under Powe in Detroit Area. S/N 282. New 1994 EQUIPPED WITH: Mori Seiki MF-D6 CNC Control w/ CRT(Fanuc 16T) SPECIFICATIONS: Max Swing Over Bed. 18.9" Max Swing Over Cross Slide. 14.6" Maximum Turning Diameter. 6.3" Maximum Turning Length. 20.7" Cross Travel Turret 1(X1-Axis) 5.3" Sub Headstock… 7.7” Longitudinal Travel Turret 1(Z1-Axis) 22" Sub Headstock… 15.4” Rapid Traverse Rate(X1. X2 Axes) 472 IPM. Rapid Traverse Rate(Z1. Z2 Axes) 590 IPM. Number of Turrets. 2. Tool Positions Turret 1. 12. Tool Positions Turret 2. 6. Spindle Bore. 2" Sub…1.4. Spindle Speed Range Main. 50-5000 RPM. Sub…60-6000 RPM. Spindle Horsepower. 15 HP. Sub…10 HP. Approximate Machine Dimensions. 135" ... morex 83" Approximate Machine Height. 82" Approximate Machine Weight. 13.000 LBS. EQUIPPED WITH: Parts Catcher. Tool Presetter. Chip Conveyer. 6” Chuck on main Spindle. 4” 3 Jaw on sub. 16C Collet Adapter. Other Mori Seiki Lathes available at the same location: 1999 Mori Seiki ZL250 MC. Twin Turret, Live tooling, $69,000 2001 Mori Seiki ZL200 SMC. Twin Turret Sub Spindle Live Tooling, $114,000 1995 Mori Seiki L-200V Vertical Lathe with Fanuc MFT4. $16,000 1995 MORI SEIKI ZL-25A/500 Twin Turret w/ tailstock $39.000 1997 MORI SEIKI ZL-35B. 12" chuck Twin Turret w/ tailstock $29,000
|
|
|
2006 OKUMA Heritage ES L10 II CNC Lathe
2006 Okuma Heritage ES-L10 II CNC Lathe Up for auction we have an Okuma CNC Lathe in good working condition. It is under power and can be inspected& tested prior to pick up at our facility in Fullerton. CA. This machine was recently removed from service at our machine shop and is priced for quick sale to make room for new equipment arriving soon. All reasonable offers will be considered. Please Note: We have 4 additional Heritage Machines available for sale. Please contact us for additional information. Specification Description MFG Date 2006 Max. Swing Over Saddle 20.47 inch Max. Turning Diameter 12.20 inch Z Axis Travel 20.47 inch X Axis Travel 5.3 inch Spindle Bore 2.4” Spindle Nose A2-6 Spindle Speed 25– 3.000 RPM Type of Turret V12 Hydraulic Tailstock Quill Diameter 3.57” Main Motor 10/7.5 HP Rapid Traverse Rate 472 IPM Floor Space(approx) ... more76.9” x 100” Voltage 220/ 440/ 3/ 60A Machine Weight 9.000 lbs(approx. Inspection Location Fullerton. CA Serial Number P0345 Machine Equipped with: Okuma OSP-U10L CNC Control 10.4 Inch TFT Color Display 12 Position Turret Foot Pedal Tailstock Chip Conveyor All Available Manuals Terms of Sale: This equipment is surplus inventory at Aerofit. LLC and is being sold as is, with no warranty. We encourage potential buyers to inspect the item prior to sale. All sales are final. Payment is due prior to pick up. Paypal accepted. Buyer must arrange for pick up. Rigging and shipping from zip code 92831. Aerofit. LLC Fullerton. CA Please contact Chris Ferrier(714) 228-7629 cferrier@aerofit.com;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147ac3eba27-0x11a-
|
|
|
Hwacheon Mega 58 CNC Lathe 1998 Fanuc 21-T CNC Control 18" 4-Jaw Chuck 8 Station
ACT\Coleman Machinery Presents: Hwacheon Mega 58 CNC Lathe 1998 Fanuc 21-T CNC Control 18" 4-Jaw Chuck 8 Station Specifications: Specification Description Swing Over Bed 22.83" Swing Over Cross Slide 14.17" Max. Turning Diameter 13.78" Distance Between Centers 52.36" Max. Cutting Diameter 22.44" Spindle Nose A1-8 Spindle Thru Hole 3.03" Spindle Bore Taper No. 7 Spindle Speeds 30- 1500 RPM Motor 15/ 20 HP X-Axis Travel 10.62" Z-Axis Travel 50.39" Rapid Feedrate(X.Z) 236.22 IPM Quill Diameter 3.03" Quill Bore Taper No.5 Quill Travel 5.9" Bed Sliding Width 16.53" Bed Length 113.38" Approx. Dimensions 132" x 79" x 75" Approx. Weight 7.716 lbs. Location: Paramount CA. 90723 Hwacheon Mega 58 CNC Lathe 1998 Fanuc 21-T CNC Control 18" 4-Jaw Chuck 8 Station Hydraulic ... moreTurret Shipping Information. Ships to: Worldwide Shipping Weight: Approx 8.000 lbs. Location: Paramount. CA 90723, United States Product is sold as is and no warranty is implied; UNLESS EXPLICITLY EXPRESSED BY ACT/COLEMAN MACHINERY Contact seller for details and payment instructions at(562) 602-1207. Ask for Ramiro ACT Coleman Inc. 16200 South Garfield Avenue Paramount. CA 90723
|
|
|
Mori-Seiki SL-2A CNC Lathe w/ Fanuc 6t Control Nice Condition!!
Mori-Seiki SL-2A Fanuc 6T Control Nice Condition! Questions Call Steve@ 866-803-5202. Shipping Quotes Contact Specifications; Swing Over Bed 22.4” Swing Over Front Cover 15.7” Swing Over Carriage 20.0” Swing Over Cross Slide 13.7” Max. Longitudinal Travel/ Work's Length 14.1" Max. Cross Travel 6.3” Spindle Center Height From Floor 43.3” Programmable Spindle Speed Range 35 ~ 3200 rpm Spindle Nose A1-6 Hole Thru Spindle ø2.04" Bed's Slant 45°/45° Turret Tool Positions 8 Stations Hydraulic Chuck 8” 3 jaw Main Motor 15 HP Weight 8360 lbs.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-147aceabe84-0x10b-
|
|
|
Wintec TC-15 CNC Lathe Fanuc Control
Machine Wintec TC-15 CNC Lathe Capabilities Max. Turning Diameter- 250mm Min. Turning Diameter- 12mm Max. Turning Length- 500mm 8" Chuck Chip conveyor Fanuc Control Under power in Cuyahoga Falls. OH We can load with overhead crane. Buyer responsible for freight.
|
|
|
Mazak SQT 10MS SUPER QUICK TURN 10MS CNC LATHE LIVE TOOLING & TAILSTOCK
1991 Mazak SQT 10MS CNC Lathe Chip Conveyor. Live Tooling, Tail Stock Our Stock Number 1401-080814 Machine Description Mazak SQT-10MS CNC Lathe Year: 1991 Specifications: are accurate to the best of our knowledge) Maximum Swing 17.13" Max Cutting Diameter 9.06" Maximum Distance Between Spindles 17.9" Spindle Nose A2-5 Spindle Bore 2.05" Bar Capacity 65" Main Spindle Indexing(C-Axis)001 Degree/ 360.000 Positions Main Spindle Speed 6.000 RPM/ Motor 15 HP(30 min) Second Spindle Bore 1.02" Second Spindle Indexing(C-Axis) 5 Degree/72 Positions Second Spindle Speed 6.000 RPM Motor 7.5 HP Max. Synchronization Speed 4000 RPM Recommended Synchronized Transfer 300 RPM X Axis Stroke 6.31" Z Axis Stroke 17.93" B Axis Stroke 18.11" Rotary Tool Motor 3 HP Rotary Tool Spindle Speed 3000 RPM Turret Type 12 Station ... moreDrum Rapid Traverse- X. Z 1180 IPM Dimensions 105.3" x 57.7" x 74.5" Machine Weight 9.460 lbs. Equipped With: Mazatrol T-32-3 Velocity& Feedrate Control Tool Path Storage Automatic Tool Eye Standard Worklight Complete Coolant System Chip& Coolant Splash Guarding Parts Catcher Chip Conveyor Live Holders Kitagawa Hydraulic Chucks This machine is in good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& M
|
|
|
Haas HL-2 CNC Turning Center Lathe w/ holders 8" chuck Tailsock A2-6 Quick Code
1995 Haas HL-2 CNC Turning Center Specifications: Control. Haas Swing Over Front Apron. 20" Swing Over Cross Slide. 9.5" Chuck Size. 8" Max Bar Capacity. 2" Distance Between Centers. 24" Max Cutting Diameter. 10" Max Cutting Length. 20" Spindle Speed. 3.750 RPM Spindle Motor. 15/20 HP Spindle Nose. A2-6 Spindle Bore. 3" Draw Tube Bore. 2.06" X-Axis Travel. 8.45" Z-Axis Travel. 20" Rapid Traverse Rates. 710 IPM Tailstock Taper. MT4 Tailstock Travel.
|
|
|
Okuma Mod. LB15II 2-Axis CNC Turning Center
Okuma Mod. LB15II 2-Axis CNC Turning Center S/N 2701(1997) Excellent Operating Condition! Specifications: Spindle Speeds to 4500 RPM 12 Position Turret, Hyd. Tailstock A2-6 Spindle Nose 2.44" Spindle Bore 8" Kitigawa B-208 Hyd. Chuck Chip Conveyor 20/15 HP Motor OSP7000L Computer Control w/ IGF RS232 Interface
|
|
|
OKUMA CADET LNC-8 LNC8 CNC LATHE TURNING CENTER
HOTLINE: 123- 456 789. This is an Okuma Cadet CNC Lathe Turning Center in Very Good Condition although we were unable to fully test this machine because unfortunately. The VAC III Drive Unit is missing. Everything else looks in great shape, Turret and Hydraulic Tail Stock look clean and ready, spindle turns smoothly by hand. When we got the machine still had fresh metal shavings from recent work. Unit is sold as is. Great value in parts or excellent candidate for a new upgrade drive. CALL. TEXT OR EMAIL WITH QUESTIONS. 1800 573 7019* SE HABLA ESPAÑOL* Model# LNC-8. Serial# C720. Kitagawa B-08 8″ POWER CHUCK. Chuck itself is offered on eBay for $1.700.00! OKUMA OSP 5020L CNC CONTROL, CRT. GRAPHIC DISPLAY, 10/7.5HP HIGH TORQUE MOTOR, Capacities 1.75″ Bar capacity. 15.75″ Swing over bed. 9.84″ Max. turning diameter. Spindle 4200 RPM Max. ... morespindle speed. 2.2″ Spindle bore. A2-6 Spindle nose. 75-4200 Spindle speed. Travels 472 IPM Rapid Traverse. X Axis travel 6.75″ Z Axis travel 16.53″ General 10/7.5HP Main motor. Turret index(single step) 0.9 seconds. 12 tool position turret. 10 gallon Hydraulic power unit capacity. Dimensions: L x W x H) 107″ x 73″ x 62″ Approx. Ship Weight: 10000 lbs. We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) We accept the following payment methods: Certified checks. Company Checks Wire transfer. Direct deposit Credit Card or Paypal. Please contact us if you have any questions. CALL. TEXT OR EMAIL WITH QUESTIONS. 1800 573 7019* SE HABLA ESPAÑOL* Visit Us! Toll Free# 1800 573 7019 Fax# 1 800 573 7019 Text# 714 658 539 0
|
|
|
Mori Seiki SL-3H CNC Lathe with One Year Warranty for MS-Tech Control (SL3H)
This Mori Seiki SL-3H CNC lathe is under power for inspection and ready to go for work immediately. A vi deo can be seen at https:www.youtube.com/watch?v=O5hotGZJJ7A&feature=youtu.be- Fanuc G-code compatible. Newly painted; looks new and clean. Tool turret is controlled reliably and stops correctly every time. The control offers complete canned cycles per convention. G70,71,72,73,76 etc. The machine is in very good condition. And spindle makes no extra noise. The CNC control comes with one year limited warranty. Great buy! For questions, please call 1-800-349-6224. Machine Features: Hydraulic power chuck Coolant system Splash Guard Tailstock Machine Specification: Chuck size 10" Swing/Max. Part diameter 21.65"13.8" over cross Max. Tuning length 21.65" Max. Longitudinal travel 22.05" Swing over bed/front cover ... more22.4"15.5" Swing over carriage/cross slide 20.08"13.78" Spindle nose A 2-6 Hole through spindle 3.03" Spindle speed 40- 4000 rpm Overall bed width 12.5" Turret tool positions 12 tools Main Motor 20/15HP Tailstock Yes Bar capacity 3.3 bore Machine dimension 153" x 69" x 79" Machine weight 11000 lbs Buyer is responsible for the cost of shipping
|
|
|
Haas SL-10T CNC Turning Center 6.00" Chuck Tailstock Floppy
HAAS SL-10T CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 05/2007 SWING OVER FRONT APRON 16.25" SWING OVER CROSS SLIDE 8" DISTANCE BETWEEN CENTERS 16.5" X AXIS TRAVEL 6.25" Z AXIS TRAVEL 14" RAPID TRAVERSE RATE ALL AXES 1200 IPM SPINDLE NOSE A2-5 SPINDLE SPEED 6.000 RPM SPNDLE BORE 2.31" MAX. BAR CAPACITY 1.75" SPINDLE MOTOR 15 HP TURRET CAPACITY 12 STATIONS TAILSTOCK TAPER MT#3 TAILSTOCK STROKE 13.75" APPROX. DIMENSIONS 102" x 55" x 70" MACHINE WEIGHT(APPROX) 5.500 LBS EQUIPPED WITH: HAAS 32-BIT CNC CONTROL WITH 14" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 6" 3-JAW HYDRAULIC THROUGH HOLE CHUCK W/JAWS HYDRAULIC FULLY PROGRAMMABLE TAILSTOCK 3.5" 1.44MB FLOPPY DISK DRIVE. BOLT ON TURRET FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE TURRET ... moreTOOLING& MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE. PLEASE PROVIDE US WITH YOUR ZIP CODE. AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email yo
|
|
|
HAAS SL-20 SL-20T CNC LATHE ST-20 SL-20 1999 withTool Holders and Chuck
2008 Haas SL20 CNC Lathe Chip Conveyor. Tool Holders Our Stock Number 1396-080614 Machine Description HAAS SL-20 CNC TURNING CENTER Year: 1999 Serial# 62148 Specifications: are accurate to the best of our knowledge) Max Swing Over Bed 20" Max Turning Diameter 10" Maximum turning Length 20" Chuck Size 8" Cross Travel(X-Axis) 8.45" Longitudinal Travel(Z-Axis) 8.45" Rapid Traverse Rate 710 IPM Number of Turrets 1 Tool Positions 10 Spindle Bore 2.44" Bar Capacity 2" Spindle NoseA2-6 A2-6 Spindle Speed Range(1 RPM Increments) 45-4000 RPM Spindle Horsepower 20 HP Approximate Machine Dimensions 127" x 62" Approximate Machine Height 73" Approximate Machine Weight 9.500 LBS CONDITION: Machine Appears to be in Excellent Condition! The Tool Setter is not working EQUIPPED WITH: Haas CNC Control. ... moreParts Catcher. 8" 3-Jaw Hydraulic Chuck, 20 HP Spindle. Chip Auger. Toolholders, No Tailstock We Can help with shipping arrangements. This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool. Inc. reserves the right to re-list this auction if payment is n
|
|
|
HwaCheon CUTEX-160 CNC Lathe with live tooling
HwaCheon CUTEX-160 with a 6" chuck. 22" swing, live tooling on all stations, twelve station turret, uses 1" stick tools. In excellent condition. New paint, comes with tooling blocks. Looks and runs as good as new holds size excellent. Buyer is responsible for rigging and shipping.
|
|
|
Wasino SG-5 CNC Gang Style Lathe with Integrated Gantry Robot, Fanuc CNC, Nice
Please see info below and photos on a very nice Wasino SG-5 CNC Gang Style Lathe w/ Integrated Gantry Robot. I do have the ability to load this machine on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at. WASINO CNC GANG STYLE CNC LATHE Model SG-5. S/N 588, New 1997 EQUIPPED WITH: Fanuc 0T CNC Control w/ CRT. In-Line Gang Style Tooling w/ T-Slotted Cross Slide, S.Robo-O Integrated Gantry Type Robot for Automatic Loading and Unloading, Flex-E-On FX 34 Collet Chuck, Tool Offsets, Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 9-1/16" Nominal Workpiece(D x L) 2" x 1-9/16" Center Height from Floor. 40-3/4" Spindle Bore. 1-3/32" Cross Travel(X-Axis) 7-7/8" Longitudinal Travel(Z-Axis) 6-11/16" ... moreRapid Traverse Rate(X-Axis) 315 IPM. Rapid Traverse Rate(Z-Axis) 472 IPM. Tooling Type. Gang. Maximum Spindle Speed(Inf. Variable) 4500 RPM. Spindle Horsepower. 3 HP. Approximate Machine Dimensions. 87" x 59" Approximate Machine Height. 93" Approximate Machine Weight. 3.500 LBS CONDITION: Machine Appears to be in Excellent Condition!
|
|
|
lathe cnc Takisawa TX-3
Great lathe.Very rigid,lots off torque, 12" Kitagawa hydraulic Chuck,some tooling, T6 Fanuc controller,needs some new resisters in the drive but besides that everything works very well,unit is on a pallet so we can load on to a truck for the lucky person who buys it.
|
|
|
OKUMA LB 25 CNC LATHE UNDER POWER ONE OWNER SINGLE SHIFT 30 HP TOOLING PACKAGE
THIS IS A GOOD USED LB25 LATHE USED SINGLE SHIFT. ONE OWNER, FULLY MAINTANED, TOOL PROBE, CHIP CONVEYOR, 10" POWER CHUCK, NEW COLOR MONITOR, UNDER POWER. COME SEE IT RUN, OKUMA OSP 5020 CONTROL, 30 HP DUAL SPEED SPINDLE, TONS OF DRILLING POWER SEE PICS, NEWER 120 PSI GRUNDFOS COOLANT PUMP! HEAVY DUTY Z AXIS MOTOR GIVES 2.200 LBS OF THRUST, TOOLING PACKAGE INCLUDES; 7 KM QUICK CHANGE HOLDERS. 4 CNMG432 RH HOLDERS. 4 VNMG RH HOLDERS. 3 RH THREADER INSERT HOLDERS. 1 RH VNMG PROFILING HOLDER. 7 VARIOUS LH TOOL HOLDERS. 3 MM CUT OFF SYSTEM. BLOCK BLADE AND INSERT. 2 AQC ER32 COLLET/BORING BAR HOLDERS-PUTS BORING BARS ON CENTER! 2 SPADE DRILLS. 3 TAP HOLDERS. 1 BAR PULLER WITH ID BLOCK. 7 ID TOOLING BLOCKS WITH 1-1/2" BORE. 2 TURRET FACE TOOL HOLDERS. COMPLETE SET OF BOOKS. TOOL KIT*NO TAILSTOCK* ON MAYBE AVAILABLE PLEASE ASK SOLD AS ... moreIS WHERE IS! FREIGHT AND RIGGING BUYERS RESPONSIBILITY. I WILL BE HAPPY TO OBTAIN QUOTES.
|
|
|
2000 Okuma & Howa HL-20 CNC Lathe w/ Live Milling C-Axis Fanuc "VIDEO"
OKUMA& HOWA HL-20 CNC Turning Center Age: 2000. VIDEO Basic Machine Specifications; This Machine is Equipped with C- Axis and Live Milling. Getting a Live Tool Count and Specs. Swing Over Bed. 19.69" Max. Turning Dia. 11.81" Distance Between Centers. 18.00" X-Axis Travel. 7.08" Z-Axis Travel. 18.11" Bar Capacity. 2.00" Spindle Bore. 2.44" Spindle Speed. 45-4500 RPM Spindle Nose. A2-6 Spindle Motor. 20 HP Turret Positions. 12 Tailstock Quill Dia. 3.9" Tailstock Quill Stroke. 4.7" EQUIPPED WITH: Fanuc 18iT CNC Control 8" 3-Jaw Hydraulic Chuck 12-Position Turret Tool Setter Tailstock 6-Turning Holders 6-Boring Holders All Available Manuals. Questions Call Steve@ 866-803-5292. Shipping Quotes Contact
|
|
|
Wasino Model LG-81 Gang Style CNC Lathe, www.assetexchangeinc.com
6" Wasino Model LG-81 2 Axis CNC Gang Style Lathe Gang Style. Collet Chuck, LNS Hydrobar, Fanuc 3T Specifications(Preliminary) Nominal work size: 4.75" x 4.75" Swing Over Bed: 18" Spindle Nose: A1-No.6, Spindle Bore: 2 1/8" No. of spindle speeds: Inf. Variable, Spindle Speed: 30-3000, Longitudinal Carriage travel: 11 3/16, Cross slide travel: x-axis) 21 5/8" Main Motor Drive: 10 hp, Equipped With: Fanuc Control 3TC. Interpolation: Linear& Circular, LNS Hydrobar Barfeed, Contact Mark Harris at 773-290-1824 or mark@assetexchangeinc.com to receive more information or to schedule an inspection.
|
|
|
1995 Hardinge Conquest CNC Lathe w/ C Axis Live Tooling Very Well Tooled
1995 Hardinge Conquest CNC Lathe w/ C Axis Live Tooling Very Well Tooled, Click to View Image Album Click to View Image Album Click to View Image Album The former owner estimated this lathe had run no more then 40-50 hours in the last five years hence the very low hours on the clock. It was used exclusively for R& D parts for a large consumer products firm. Currently equipped with an unused 8" Gamet Powerhold, hydraulic 3 jaw chuck, 20C collet nose, Renisaw tool presetting system, tailstock& 5 position live C axis. It also includes two quick change coolant tanks; one for oil and one for water base flood coolant. Tooling includes 5 Hardinge live tool drivers, lots of drill/ boring bar holders, bar puller, parts catcher, all manuals and some small Hardinge lathe accessories. Has Fanuc 18-T control& operates on 220V 3 phase. ... moreIn addition a full set, over 50 pcs, of round& hex 20C collets is included. Missing only the 3/4" of both round& Hex. Nearly all of these collets are new. 3079 Hours"on" time. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight qu
|
|
|
Haas SL-30T CNC Turning Center Lathe Tailstock Rigid Tap 30hp 10" Chuck Gear Box
2004 Haas SL-30T CNC Turning Center w/ Tailstock and Gear Box Specifications: Control.Haas Max Swing Over Apron. 30" Max Turning Dia. 17" Max Turning Length. 34" Distance Between Centers. 39" X-Axis Travel. 11.3" Z-Axis Travel. 34" Rapid Traverse Rates. 710 IPM Max Bar Capacity. 3" Spindle Bore. 3.5" Spindle Nose.A2-6 Spindle Speeds. 0 to 3.400 RPM Max Torque. 300 ft-lb@ 700 RPM Spindle Motor. 30 HP Turret Stations. 12 Machine Weight. 16.000 lbs Machine Dimensions. 150"L x 77"W x 74"H Equipped With: 10" MMK 3 Jaw Chuck Chip Auger Rigid Tapping Programmable Tailstock Quick C
|
|
|
1986 STAR CNC SWISS LATHE JNC-10 YASNAC CONTROL SCREW MACHINE
AS TAKEN FROM SERVICE THIS WEEK RUNNING PARTS AT SOUTHERN CALIFORNIA MAJOR CONTACT/CONNECTOR MANUFACTURER. JNC-10 10MM CAPACITY. COMPLETE WITH SINGLE TUBE GRAVITY BARFEED.
|
|
|
Haas OL-1 Office Lathe CNC Turning Center Mini 5C Collet Small 1.25" Bar 2006
2006 Haas OL-1 Office Lathe Specifications: Control. Haas Swing Over Table. 4.95" Swing Over Cross Slide. 11" X-Axis Travel. 12" Z-Axis Travel. 8" Rapid Traverse Rates. 757 IPM Max Bar Capacity. 1.25" Without Drawtube Spindle Speeds. 6.000 RPM Spindle Motor. 5 HP Machine Weight. 1.500 lbs Machine Dimensions. 70"L x 70"W x 78"H Equipped With: Caster Wheels 3.5" Floppy Drive Coolant Pump Kit 5C Collet Chuck Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility
|
|
|
Chiron DZ 15kW VMC Twin Spindle 4-Axis high speed CNC Vertical Machining Center
2005 Chiron VMC Model DZ-15KW Machine in Nice Condition Machine was Working till removed from facility. Now placed at storage. Buyer's are encourage to setup viewing prior to bidding/buying Description: Control: GE Fanuc Series 18i- MB5 Manufacturer: Chiron America Inc. Products: High production CNC Vertical Machining Systems Model Number: DZ 15 K W Machine Description: CNC Vertical Machining Center Table Data: Spindle Data: Table Length(in) Spindle Power HP Table Width(in) Speed Standard 20 ~ 12.000 rpm Table Diameter(in) Speed Option 1 rpm Table Load(lbs) Speed Option 2 rpm Axis Travel Data: Tool Data: Travel XYZ-axis 12/16/14(in) Number of Tools 24( Travel ABC-axis(deg) Taper HSK 63 Rapid Traverse Rates XYZ 2.400/2,400/ ipm) Tool Diameter 3.200(in) Positioning Accuracy XYZ +/ in) Tool Weight 22.0(lbs) Repeatability XYZ-axis +/ in) ... moreTool Length Maximum 9.80(in) Pallette Changer Tool Change Time 0.90(sec) Chip to Chip Time 2.40(sec) total weight: 10070kg. Specifications subject to final verification. Buyer will be responsible for pickup/Freight/Customs duties- Loading fees $400. Payment with Wire transfer/ bank deposit or certified check prior to shipment. Tax will apply to Canadian Buyer. AS IS. WHERE IS" No Warranty No Returns!Final Sale.
|
|
|
Hyundai HiT-18S CNC Lathe Turning Center w/ Tailstock 3 jaw chuck Siemens contl
1996 Hyundai HiT 18-S CNC Lathe Specifications Control. Siemens Swing over Bed. 17.32” Max Turn Diameter.11” Max Turn Length.20” X-Axis Travel.7.09” Z-Axis Travel.20.08” Rapid Traverse(X& Z) 1181 IPM Spindle Bore.3.15” Max. Bar Capacity.2.76” Spindle Speeds.3600 RPM Spindle Nose. A2-8 Spindle Motor. 20 HP Turret Postions.8 Tailstock Quill Taper…MT#4 Equipped with: Siemens Control Tailstock 3 Jaw Chuck Turbo Chip Conveyor All Available Tool Holders All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! ... moreSpecifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating o
|
|
|
Okuma Howa ACT 35 CNC Lathe Turning Center Fanuc 18T Control Tailstock 12" Chuck
1998 Okuma Howa ACT-35 CNC Turning Center with Tailstock and 12" Chuck Specifications: Control. Fanuc 18T Swing Over Bed. 19.68" Max. Turn Dia. 13.7" Max. Turn Length. 24.02" Rapid Traverse Rates. 1180 IPM Z/ 844 IPM X Bar Capacity. 3.13” Spindle Bore. 3.62" Spindle Speeds. 3.500 RPM Spindle Motor. 25 HP Spindle Nose. A2-8 Turret Stations. 12 X-Axis Travel. 7.87" Z-Axis Travel. 24.02" Machine Weight.approx) 11.000 LBS Machine Dimensions. 1134"x64"x76" Equipped With: Fanuc 18T 12" Kitagawa 3-Jaw Chuck Programmable Tailstock Chip Conveyor Misc. Tool Holders Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: T
|
|
|
MORI SEIKI ZL-25B 4-Axis CNC Turning Center Lathe Fanuc Control
Mori Seiki ZL-25B/500 4-Axis CNC Turning Center. S/N 71, New 1990. Stock# 30829 Specifications: Max Swing Over Cross Slide– 13.78” Maximum Turning Diameter– 10.24” Maximum Turning Length– 20.87” Standard Chuck Size– 10” Cross Travel. Upper and Lower Turrets(X1/X2) 6.3” Longitudinal Travel Upper and Lower Turrets(Z1/Z2) 23.23” Rapid Traverse Rate(X1/X2) 472 IPM Rapid Traverse Rate(Z1/Z2) 590 IPM Tool Positions Turret 1– 10 Tool Positions Turret 2– 8 Spindle Bore– 3.15” Spindle Nose– A2-6 Spindle Speed Range– 35 to 3500 RPM Spindle Motor– 25 HP Dimensions– 182” x 72” x 80” Weight. Approx– 15,840 Lbs. Equipped with: Fanuc Control 10” 3-Jaw Tailstock Chip Conveyor PRICE: $27.500.00 USD FOB TRUCK DAYTON OH. Offered locall y an d subject to prior sale. Also su bject to the standard MD NA 30 day ret urn pr ivilege. Freight prepaid. If proven mechanically ... moreunsat isfactory or repair at seller option. Loading is availab le. Buyer resp onsible for shipping. We can assist with shipping rate quotes on request. Local sales tax is 7.25% if appl icable. Wire transfer. Ca shier's check. Paypal, company check. Mc and visa are all acceptable forms of payment. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms& Conditions.
|
|
|
Daewoo Doosan Puma 400B CNC Turning Center Lathe Fanuc 18iT Tailstock 18" 2000
2000 Doosan Puma 400B CNC Turning Center with 4.62" inch bar capacity and 18" Chuck Specifications: Control.Fanuc 18iT-B Max. Swing Over Bed. 30.3" Max. Swing Over Carriage. 23.2" Distance Between Centers. 44.7" Max. Turn Dia. 21.7" Max. Turn Length. 41.4" Spindle Nose. A2-11 Chuck Size. 18" Bar Capacity. 4.62" Spindle Bore. 5.20" Spindle Motor. 50 HP Spindle Speed. 2.000 RPM Max. Spindle Torque(30 Min. Rating) 2.419 Ft.Lbs. Turret Positions. 12 Tailstock Spindle Taper.
|
|
|
1995 Hitachi Seiki HT 23-SII CNC Lathe Bar Feed and Chip Conveyor and KV Tooling
1995 Hitachi Seiki HT 23-SII CNC Lathe Bar Feed and Chip Conveyor and KV Tooling 2 Axis Lathe Chuck Size 10" Max Diameter Bar Capacity 2.5" Max Swing Over Bed 15" Max Turning Diameter 10" Max Machining Length 23.6" Spindle Motor 20 hp Spindle Speed 20- 3600 rpm Spindle Bore 3.1" Spindle Nose A2- 8 Tools KV Tooling 10 Positions Rapid Traverse Rates 787 945 IPM X Axis Travel 7.9" Z Axis Travel 24.8" Turret Index 0.1 sec Tailstock Taper MT#5 Machine Weight 10.000 lbs Equipped with: KV Tooling(12 KV tools) Chip Conveyor Tailstock Part catcher LNS Bar feed Seicos multi-control We reserve the right to cancel the auction of this item at any time due to Private Sale Payment Policy We accept payment by wire transfer. Must pay by wire transfer within 48 business hours from auction end. If payment is not received ... moreby our bank within 72 hours of auction end. Item will be re-listed without notice. An Unpaid Item Dispute will be filed for any and all unpaid items. Additional bank and wire transfer surcharges may apply. Shipping Information Additional Fees(i.e. Skidding. Loading or Special Packaging) may apply to item if required, according to size and type. Item will be shipped 5-7 business days after payment is received. Buyer is responsible for all Rigging and Trucking cost. Winner notifications will be sent to Ebay registered email address. Call or Email us for Shipping Quotes
|
|
|
Takisawa TX-2 CNC Lathe
Takisawa TX2 CNC turning center. Machine is Under power It Comes with 5C and 10" Chuck Fanuc 6T RS232 interface. 24" Z travel. 2.05 thru hole; will turn a 12" diameter part. It weighs about 8.500 LBS Loading $300.00
|
|
|
Emcoturn 320 CNC Lathe MUST SELL!
Emcoturn 320 CNC Lathe. Fanuc Series OT Control. Works fine, shop closed Electrical: 380Volts, 3 Ph, 60 Cyc Weight: 1650 Lbs Year: 1993(double checking) It does have some screen burn(please see pictures) however screen is still clearly visible while on(1st photo) The buttons have some where on them. I have written on a few the functions. I can list the functions. The plexiglass cover had a crack and has a small piece broken out. Can easily repaired with new plexiglass. Never bothered me so I never changed it. Oil tray and all leg side piece covers are included as well. Underneath cabinet lock is zip tied to oilers(see pic) I can not ship it myself however I can put you in touch with a local shipper if need be. Thanks! Also I DO NOT have a power supply in it's current facility. With any major purchase I would suggest any interested parties ... morecheck it in person. Feel free to call me at 917-546-6600 and I will try to answer any questions thanks!
|
|
|
Hyundai HiT-8S CNC Lathe Turning Center Tailstock 3 jaw chuck Siemens Parts Catc
1994 Hyundai HiT 8-S CNC Lathe Specifications: Control. Seimens 840C Max Swing. 11.8" Max Cutting Diameter. 6.3" Y-Axis Travel. 3.93" Z-Axis Travel. 11.4" Spindle Bore. 1.96" Max Bar Capacity. 1.57" Spindle Nose.A2-5 Spindle Speed. 6000 RPM Spindle Drive Motor. 10 HP Spindle Torque.63.5 ft/lbs Tool Capacity. 8 Station Turret Rapid Traverse-X/Z.1180/1180 IPM Approx Dimensions. 68" x 56" x 71" Approx Weight. 5800 lbs Equipped With: Siemens 840C Controller Tailstock Parts Catcher Tool Presetter(Not Functioning) 6" 3-Jaw Kitagawa Chuck(9) Boring Bar Holders(1) Face Turning Holder(7) Wedge Clamps All Available Manuals Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Cele
|
|
|
Milltronics ML28/60 CNC Flat Bed Teach Lathe
Machine sold as is. Loading onto buyers truck included. Machine can be inspected under power in Pontiac. MI with advanced notice. Please contact us with any questions. Milltronics ML28/60 Flat Bed CNC Teach Lathe Year of Mfg: 1999*See this lathe under power! CNC Control. Centruion 6 Chuck Size. 12" 3 Jaw Swing Over Cross Slide. 19" Max. Distance Between Centers. 60" Overall Bed Length. 80" Spindle Speed. 40- 2.000 rpm Spindle Bore. 4 1/8" Overall Weight(approx. 9.000 lbs. Equipped With: 1) 15" 4-Jaw Chuck Coolant Tailstock 4-Way Tool Post
|
|
|
Tornos Deco 2000/ 26 SWISS CNC sliding head lathe with Tornos Robobar barloader
DIRECT FROM HIGH QUALITY GERMAN FACTORY: Tornos Deco 2000/ 26 Swiss CNC sliding head lathe New 1999 26mm 10 axis Tornos Robobar SSF532 magazine loader for 10' bars Run 52700 hours from new by original owner Maintained to very high standard by Tornos and the owner There are some extra tools to come including 3-4 live tools( photo shows example tools.actuals to be confirmed) The chip conveyor system is NOT included but they have all the original Tornos tray and cover Please see machine running at: https:www.youtube.com/watch?v=l-r1AQOx7Us&feature=youtu.be BUY IT NOW for just $ 57500 USD.or MAKE BEST OFFER We will pack the machine into shipping container for safe and secure shipment to US.Allow around $ 9000 for shipping to door including all the packing materials but not including any US customs fees or duty or taxes. Any questions ... moreplease feel free to call Roger Roberts anytime on +44.7831.850595
|
|
|
2000 OM VT5-16N CNC VTL with Fanuc 18T
2000 OM VT5-16N CNC VTL with Fanuc 18T Table Diameter: 63” Max. Swing/ Turning: 79/67” Max. Turning height above table: 63” Max. Weight Workpiece: 22000 lbs. Max. Cutting force: 25000 N Vertical travel of tool head: 35.4” Horizontal travel of tool head: 47.2” Acceptable size of cutting tool: 1.26 x 1.26” Vertical travel of tool head: 35.4” Horizontal travel of tool head: 63” Ram size(square) 7.1” Acceptance size of cutting tool: 1.26 x 1.26” Magazine capacity(No. of tools) 16 Rapid travel of tool head: 394 IPM Feed rate of tool head: 0.0004 ~ 19.7”rev Max. Clearance between cross rail& table surface: 75.4” Vertical travel of cross rail: 39.4” Vertical travel speed of cross rail: 14.2 IPM Range. Table speed(2 steps, variable in each step) Low 1.6 ~ 66 min-1(rpm) High 6 ~ 275 min-1(rpm) Main motor(Standard/High) AC 50/40 HP(37/30 kW) AC ... more74/60 H(55/45 kW) Servo-motor for tool head(AC) 2 sets for X& Z axes: Fanuc Servo Motor Motor for Cross rail vertical travel: 7.4 HP x 4 ph. 5.5 kW z 4 PH) Motor lubrication pump: 1 HP x 4 PH Motor for hydraulic device(turret) 9.4 HP x 4 ph. 7 kW x 4 PH) Motor for hydraulic devise(RAM/ ATC) 5 HP x 4 PH. Overall Dimension& Weight Max. Height: 208” Floor Space(W x D) 218” x 153” Net Weight: 42.000 lbs. RAM/ATC Max. Height: 214” Floor Space(W x D) 225” x 153” Location: USA Under Power: YES Condition: Excellent
|
|
|
Mori Seiki SL-150SMC CNC Lathe
lease Refer To Machine# 945233 Mori Seiki SL 3SSMC L2155 Lathes- Combination N/C& CNC 3 Axis Or More Chuck Size 6" 3 Jaw Main. 5" 3 Jaw Sub. Manufacturer Mori Seiki. Model No. SL 35SMC. Serial No. 666. Year Mfg. 1997. Control Fanuc MSC-518. Swing 24.4" 17.9" Max Center Distance 20.5" Max Turning Diameter 16.9" X Axis Travel 9.1" Z Axis Travel 20.5" Additional Axes Data Power Tools. C Axis. Spindle Speeds 5.000 RPM, Main& Sub. Hole Through Spindle 2.2" 1.86" Turret Configuration 12 Position. Features/Accessories Presetter. Chip, Parts Catcher, Static Toolholders, 4 Power Tools + Static. Motor HP 15/HP/11 HP. Spindle Nose/Taper A2-5 A2-5. Condition Good. Comments Immediately Available. FOB Point Elk River. MN.
|
|
|
daewoo puma 12L cnc lathe
machine as a newer fanuc servo motor was working until the fuse with out saleing as is will work on price
|
|
|
HAAS SL30 CNC LATHE 2004
2004 HAAS SL-30 Chuck Size 10" Max Diameter Bar Capacity 3" Max Swing Over Bed/ Carriage 30" 14.5" Max Turning Diameter 17" Distance Between Centers 39" Max Machining Length 32" Tools 12 Spindle Motor 30 HP Spindle Speed 20- 3400 RPM Spindle Bore 3.5" Spindle Nose A2-6 Spindle Torque 300 ft. lbs. Rapid Traverse Rates(X& Z) 710 IPM X-Axis Travel 11.3" Z-Axis Travel 34" Tailstock Taper MT#4 Machine Dimensions(L x W x H) 162" x 77" x 74" Machine Weight 16.000 lbs. FEATURES: HAAS CNC CONTROL 3.5" Floppy Disc Drive 10" Hydraulic Chuck Fully Programmable Hydraulic Tailstock Chip Auger For more information on this machine. Please call Gary at 888-998-4440.
|
|
|
Mazak Quick Turn 15-N CNC Lathe, '93 Mazak Turning Center w/ Tailstock & 20 HP
Mazack 17" x 20" CNC Lathe. Quick Tuen 15-N Tuening Center, Motor- 20 HP, Mazak 15-N CNC Lathe Specification Description Swing, 17.32" Swing Over Carriage, 10" Distance betwenn Centers, 19.69" Max Turning Diameter, 11.81" X-Axis Travel, 7.09" Z-Axis Travel, 20.08" Spindle Bore, 2.4" Spindle Nose, A2-6, Turret Tool Cap, 8, Spindle Speeds, 45 to 4.500 RPM, Main Motor, 20 HP, Rapid Traverse Rate. X& Z Axis, 1.180 I.P.M. Cutting Feed Rate, 197 I.P.M. Tailstock Quill Diamater, 3.15" Tailstock Travel, 5.12" Tailstock Taper, 4 MT, Weight, 9.000 Lbs, Equipped With: MazaTrol T32B CNC Control. 8" 3-Jaw Chuck, Tailstock, Tool Eye, Chip Conveyor, Misc. Tool Holders NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate ... moreas possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. This machine needs to be shipped via a flat-bed. Dimensions and Weight should be above. Contact E-Bay Sales@ 847-290-0167 Ext. 135 or 133 if you have any questions on the machine. NOTE: This machine can be picked up in Elk Grove Village. IL( near O'Hare) All Machines are loaded for Free unless unusual circumstances NEED HELP OR HAVE ADDITIONAL QUESTIONS! Feel Free to call us direct at 847-290-0167… ask for Ebay Sales. Don't see what you want on E-bay? Give us a call… less than half our Inventory is on e-bay,
|
|
 |