|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: City of Industry, United States 1 x 15 KW High Frequency Induction Heater Furnace. High frequency induction heater furnace. With 100% load design, can work in 24 hours without stop. ... moreFluctuating frequency: 30 - 100 KHZ. Electric solenoid valve.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States With 100% load design, can work in 24 hours without stop. Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) ... more16:1. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States With 100% load design, can work in 24 hours without stop. Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) ... more16:2. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
Free Shipping Condition: New Location: China 15KW High frequency induction heater furnace. This item only has 220V single phase 50-60HZ. 3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ... more≥ 2L/Min ；. 2 、 Surging frequency:30KHz ～80 KHz ；.
Buy It Now
$180.00 Shipping Condition: New Location: Livingston, United States This listing is for a brand new 1 5KW 1-20KHz low-frequency induction heater with til t-pour graphite crucible(item# IH 25K) Note: This model only available ... morein 460-480 volt three-phase. Across International's IHL series 1 kHz to 20 kHz low frequency induction heaters are good for a wide range of applications including deep heat penetration for full hardening processes. Steel rod forging, tempering of pressing dies, pre-heating for welding, and melting of metal batches over 4 lbs. They are not limited to ferromagnetic materials, so nonferrous metals can also be used effectively. There are three major components to the system: the power supply. The compensating capacitor/transformer and the induction coil/smelting crucible. Our heaters automatically adjust to the best resonant frequency in order to achieve the most efficient overall heating results based on our customer's requirements which include heat penetration, heating efficiency, operating noise and electromagnetic homogeneity. Two of our most popular low frequency machines are the Melting Furnaces with Tile-Pour Melter and Auto-feeding Rod Heating Furnaces for Forging. Main Features Ease of use: just plug in the power and connect the cooling system. Our simple instruction allows you to use the heater in 15 minutes. Digital output. Frequency and current displays. Dual automatic and manual modes. Comes with one graphite or silica crucible. Additional crucibles available at extra cost. melting material decides crucible type. Weight and size of the material decide crucible size) ISO 9001:2008 registered manufacturer. One year warranty and lifetime US-based parts and service support. Safety Overvoltage protection: machine shuts down. Overvoltage light turns on and buzzer sounds continuously when line voltage exceeds 260V. Alarm shuts off automatically when voltage returns below 260V. Overheat protection: if sensor detects heat sink temperature is over 55°C. Machine shuts down, overheat light turns on and buzzer sounds continuously. Decrease water tem
Buy It Now
Free Shipping Condition: New Location: China Power: 2KW / 3KW (Optional). Induction Heater 1. Induction heating copper ring 1. Cooling stainless steel barrel 1. Machine size: 33 14 21cm.
Buy It Now
Free Shipping Condition: New Location: China Power: 2KW / 3KW (Optional). Induction Heater 1. Induction heating copper ring 1. Cooling stainless steel barrel 1. Machine size: 33 14 21cm.
Buy It Now
$300.00 Shipping Condition: New Location: China With 100% load design, can work in 24 hours without stop. 1 x Three-phase High Frequency Induction Heater. The higher the frequency, the shallower the ... moreheating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
Free Shipping Condition: New Location: Livingston, United States This listing is for a brand new 15KW mid-frequency 30-80KHz dual station induction heater(item# IH15B) Note: This model has no timers and only available ... morein 220 volt single phase. Across International IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating. Cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel containers and more. Mid-frequency induction heaters are the simplest in terms of design and implementation. With their low cost of ownership and maintenance. They are the most popular and reliable machines. The 15kW models are especially popular for their large power capacity and small footprint at an affordable price. This makes them standard equipment for many factories, labs and workshops where 230V AC is available. Induction heating does not involve the external application of heat but rather the internal generation of heat in the workpiece itself. This process dispenses with long heating periods and enables the limited introduction of heat in a local and precisely timed manner. Thus achieving a high degree of efficiency and maximum exploitation of energy. When compared with conventional heating methods, induction heating achieves maximum levels of quality and efficiency across a practically unlimited range of applications. The basic principles of induction heating have been understood and applied to manufacturing since the 1920s. During World War II. The technology developed rapidly to meet urgent wartime requirements for a fast, reliable process to harden metal engine parts. More recently, the focus on lean manufacturing techniques and emphasis on improved quality control have led to a rediscovery of induction technology, along with the development of precisely controlled, all solid state induction power supplies. What makes this heating method so unique? In the most common heating methods, a torch or open flame is directly applied to the m
Buy It Now
Condition: Used Location: Del Rio, United States Manufacturer : INRESA. Type : Furnace. We are good people and willing to help. Our assets have certified seals on them. NOT HAPPY: Call us! Give us an ... moreopportunity to help. YELLOW TESTED > CONNECTED TO POWER OR ATTEMPT TO START: When possible we attempt to PLUG IN or POWER UP the asset in liquidation.
Buy It Now
Condition: Used Location: Bosque Farms, United States 460 V 3 PH 60 HZ. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured ... moreit is for testing purposes only unless it is attached or stated that it will be included.
Buy It Now
Free Shipping Condition: New Location: Livingston, United States This listing is for a brand new 25KW mid-frequency 30-80KHz induction heater(item# IH25A) Note: This model only available in 460-480 volt three phase. ... moreAcross International IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating. Cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel containers and more. Mid-frequency induction heaters are the simplest in terms of design and implementation. With their low cost of ownership and maintenance. They are the most popular and reliable machines. The 15kW models are especially popular for their large power capacity and small footprint at an affordable price. This makes them standard equipment for many factories, labs and workshops where 230V AC is available. IH25A Compact Induction Heater Features Ease of use: just plug in the power and connect the water cooling system. Our simple instruction allows you to use the heater in 15 minutes. Light weight(only 60 Lb) Portable(with built-in handle) instant heat and up to 90% energy savings. Precise control with digital time and current displays. Remote foot switch for safer operation. Dual automatic and manual modes. Optional graphite and silica crucibles available. melting material decides crucible type. Weight and size of the material decide crucible size) Custom coil design(fixed coil or coil on a cable so it can be used by hand like a wand) Frequency is non-adjustable. It depends on the coil design(diameter of turns, numbers of turns, copper tubing diameter and total length) ISO 9001:2008 registered manufacturer. We provide sample testing and custom made coils in our New Jersey facility. Safety Features Overvoltage protection: machine shuts down when input voltage is over 495V. Overvoltage light will turn on and buzzer will sound continuously. Alarm and light shut off automatically when voltage goes below 495V. Overheat protection: if sensor detects heat r
Buy It Now
$75.00 Shipping Condition: New Location: Rancho Cucamonga, United States 220V 15KW Induction Heating Machine. Output Power 15KW. With 100% load design, can work in 24 hours without stop. 1 x 220V 15 KW High Frequency Induction ... moreHeater Furnace. The principle of Induction Heating Technology.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States With 100% load design, can work in 24 hours without stop. Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) ... more18:1. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
Free Shipping Condition: New Location: China 220V 15KW High frequency induction heater furnace. 3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ≥ 2L/Min ；. 2 、 Surging frequency:30KHz ... more～80 KHz ；. 4 、 Smart,flexible ； easy installation and convenient operation ；.
Buy It Now
Free Shipping Condition: New Location: China 15KW High frequency induction heater furnace. This item only has 220V single phase 50-60HZ. 3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ... more≥ 2L/Min ；. 2 、 Surging frequency:30KHz ～80 KHz ；.
Buy It Now
Free Shipping Condition: New Location: Livingston, United States This listing is for a brand new 10KW high frequency 1 00-500KHz induction heater(item# IHG10) Note: This model only available in 220 volt single phase. ... moreIHG series 100 kHz to 1100 kHz high frequency induction heaters are among the latest products developed by Across International. They can quickly heat most metals that other frequencies can not heat efficiently. Like aluminum and metal powders. And uniquely they can heat parts from a distance. These heaters are the ideal tools for fine steel wires(such as those used in dentistry) annealing, small precision shaft quenching, hard alloy saw blade brazing and metal powders melting. Induction heating does not involve the external application of heat but rather the internal generation of heat in the workpiece itself. This process dispenses with long heating periods and enables the limited introduction of heat in a local and precisely timed manner. Thus achieving a high degree of efficiency and maximum exploitation of energy. When compared with conventional heating methods, induction heating achieves maximum levels of quality and efficiency across a practically unlimited range of applications. The basic principles of induction heating have been understood and applied to manufacturing since the 1920s. During World War II. The technology developed rapidly to meet urgent wartime requirements for a fast, reliable process to harden metal engine parts. More recently, the focus on lean manufacturing techniques and emphasis on improved quality control have led to a rediscovery of induction technology, along with the development of precisely controlled, all solid state induction power supplies. What makes this heating method so unique? In the most common heating methods, a torch or open flame is directly applied to the metal part. But with induction heating, heat is actually"induced" within the part itself by circulating electrical currents. Since heat is transferred to the product via electromagnetic waves, the part never comes into direct contact with any flame, the c
Buy It Now
$143.00 Shipping Condition: New Location: China Quenching power: 500w-3000w (varies with load). Logistics weight: 8.0kg.
Buy It Now
Free Shipping Condition: New Location: Livingston, United States Store Pages Store Categories 15KW 30-80KHz All Solid State Induction Heater Heating Melting Furnace System Item Details This listing is for a brand new ... more15KW mid-frequency 30-80KHz induction heater(item# IH15A) Note: This model only available in 220 volt single phase. Across International IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating. Cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel containers and more. Mid-frequency induction heaters are the simplest in terms of design and implementation. With their low cost of ownership and maintenance. They are the most popular and reliable machines. The 15kW models are especially popular for their large power capacity and small footprint at an affordable price. This makes them standard equipment for many factories, labs and workshops where 220V AC is available. Induction heating does not involve the external application of heat but rather the internal generation of heat in the workpiece itself. This process dispenses with long heating periods and enables the limited introduction of heat in a local and precisely timed manner. Thus achieving a high degree of efficiency and maximum exploitation of energy. When compared with conventional heating methods, induction heating achieves maximum levels of quality and efficiency across a practically unlimited range of applications. The basic principles of induction heating have been understood and applied to manufacturing since the 1920s. During World War II. The technology developed rapidly to meet urgent wartime requirements for a fast, reliable process to harden metal engine parts. More recently, the focus on lean manufacturing techniques and emphasis on improved quality control have led to a rediscovery of induction technology, along with the development of precisely controlled, all solid state induction power supplies. What makes this heating method so uniqu
Buy It Now
$599.99 Shipping Condition: New Location: China Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor ... moreis used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Buy It Now
$60.00 Shipping Condition: New Location: China ZDBT-4 2500W. With automatic and foot switch heating. 1 xInduction Heating Machine Tool Kit. W ith crucible, with current indication. Model Power. Weight: ... more7kg.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States With 100% load design, can work in 24 hours without stop. Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) ... more18:2. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
$128.99 Shipping Condition: New Location: China ZDBT-4 1200W 2000W 2500W. With automatic and foot switch heating. Built-in pump.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States With 100% load design, can work in 24 hours without stop. The higher the frequency, the shallower the heating depth, and the lower the frequency, the ... morebetter the diathermancy. Fluctuating Frequency 500-2200 KHz.
Buy It Now
$143.00 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: United States What’s great about this model is its low energy consumption and high output power. Built in status displays alert the user of any possible errors providing ... morehigher reliability and sustainability. Lower frequency leads to better diathermancy.
Buy It Now
Free Shipping Condition: New Location: China 25KW Portable High Frequency Induction Heating Machine Major Features： 1.It adopts the most advanced Most. IGBT frequency conversion control technologies ... moreto ensure the high efficiency and maximum output power 2. It has the constant current and power control function. Which can significantly optimize metal heating process, realize the high efficient and fast heating and bring into play the superior performance of the products. 3. It ha the function of three-stage time setting repressed by heating-heat preservation–cooling. Furthermore. The pore for heating and heat preservation is available for independent regulation. which can facilitate the heating and heat preservation, which is applicable to places requiring bulking and repeated heating. 4. A maxi mum ten types fault protection and display of over–current. Over-voltage, water shortage and phase missing can provide higher reliability and durability. 5. It is safe and reliable. And requires no enquires no equipments of ten thousand voltage, and thus can ensure the safe operation. 6. The comprehensive full load design is available for 24-hour continuous operation, 7. It is available for ultraviolet temperature detection. Which can realize the automatic ciontol of temperature. Improve the heating performance and simplify the manual operation. Technical Parameters: OP-25AB(Common) split OP-25AB(Enhanced) split Input current 380V 50-60HZ 380V 50-60HZ Output power oscillation 25KVA 25KVA Oscillation frequency output 30-100KHZ 30-100KHZ Maximum input power 36KVA 36KVA Cooling water flow 0.3Mpa ≥ 6L/MIN 0.3Mpa ≥ 6L/MIN Current heating insulation 200-1000A 200-1000A Temporary rate set 80% 30°C 80% 30°C Heating time 1-ns 1-99s Holding time 1-99s Water temperature Input current 5-40A 5-40A Net Weight 32kg 32kg Volume A volume 460 x 460 x 290mm 510 x 300 x 510mm Volume points M： 460 x 460 x 290mm S： 190 x 260 x 290mm M： 510 x 300 x 510mm S： 190 x 260 x 290mm Cable to connect a length of 2 meters(6 meters can be set up) could take another 100% duty cycle. The ou
Buy It Now
Free Shipping Condition: New Location: Livingston, United States This listing is for a brand new 6.6KW high frequency 200-500KHz induction heater(item# IHG06A1) Note: This model only available in 220 volt single phase. ... moreIHG series 100 kHz to 1100 kHz high frequency induction heaters are among the latest products developed by Across International. They can quickly heat most metals that other frequencies can not heat efficiently. Like aluminum and metal powders. And uniquely they can heat parts from a distance. These heaters are the ideal tools for fine steel wires(such as those used in dentistry) annealing, small precision shaft quenching, hard alloy saw blade brazing and metal powders melting. Induction heating does not involve the external application of heat but rather the internal generation of heat in the workpiece itself. This process dispenses with long heating periods and enables the limited introduction of heat in a local and precisely timed manner. Thus achieving a high degree of efficiency and maximum exploitation of energy. When compared with conventional heating methods, induction heating achieves maximum levels of quality and efficiency across a practically unlimited range of applications. The basic principles of induction heating have been understood and applied to manufacturing since the 1920s. During World War II. The technology developed rapidly to meet urgent wartime requirements for a fast, reliable process to harden metal engine parts. More recently, the focus on lean manufacturing techniques and emphasis on improved quality control have led to a rediscovery of induction technology, along with the development of precisely controlled, all solid state induction power supplies. What makes this heating method so unique? In the most common heating methods, a torch or open flame is directly applied to the metal part. But with induction heating, heat is actually"induced" within the part itself by circulating electrical currents. Since heat is transferred to the product via electromagnetic waves, the part never comes into direct contact with any flame, the
Buy It Now
Free Shipping Condition: New Location: China 15KW High frequency induction heater furnace. 3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ≥ 2L/Min ；. 2 、 Surging frequency:30KHz ～80 KHz ... more；. 4 、 Smart,flexible ； easy installation and convenient operation ；.
Buy It Now
$70.00 Shipping Condition: New Location: China 15KW High frequency induction heater furnace. 3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ≥ 2L/Min ；. 2 、 Surging frequency:30KHz ～80 KHz ... more；. 4 、 Smart,flexible ； easy installation and convenient operation ；.
Buy It Now
$160.00 Shipping Condition: New Location: China ZDBT-4 1200W 2000W 2500W. ZDBT-6 2000W 2800W 3500W. (This product is 220V only). With automatic and foot switch heating. Built-in pump. W ith crucible, ... morewith current indication.
Buy It Now
$70.00 Shipping Condition: New Location: China 15KW High frequency induction heater furnace. 3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ≥ 2L/Min ；. 2 、 Surging frequency:30KHz ～80 KHz ... more；. 4 、 Smart,flexible ； easy installation and convenient operation ；.
Buy It Now
$897.90 Shipping Condition: New Location: China Model: 45kw. output power: 45kw. Fluctuating Frequency : 30-1 00KHZ. the flow rate of cooling water :0.2Mpa. water temperature protection point :
Buy It Now
$360.00 Shipping Condition: New Location: China 18KW High Frequency Induction Heater Furnace. Put the workpiece waiting for heating in the induction coil;. Output oscillation frequency. The cooling ... morewater should be clean and soft, and the inlet cooling water should not exceed 45℃, otherwise may cause fault to the machine.
Buy It Now
$143.00 Shipping Condition: New Location: China Host size: 355 158 198mm.
Buy It Now
$335.90 Shipping Condition: New Location: China Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor ... moreis used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Buy It Now
$609.99 Shipping Condition: New Location: China Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor ... moreis used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Buy It Now
Condition: For parts or not working Location: Morgantown, United States We powered up the machine without a pendant,heat station or coil connected and the ready light flashed with code 57.4 flashing on display. This was the ... moreextent of the testing. Unit appears in fair physical condition but is being sold AS-IS with only what is shown.
Buy It Now
Free Shipping Condition: New Location: China 15KW High frequency induction heater furnace. 3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ≥ 2L/Min ；. 2 、 Surging frequency:30KHz ～80 KHz ... more；. 4 、 Smart,flexible ； easy installation and convenient operation ；.
Buy It Now
Free Shipping Condition: New Location: China 220V 15KW 30~80KHz High Frequency Induction Heater Furnace. 15KW High frequency induction heater furnace. This item only has 220V single phase 50-60HZ. ... more3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ≥ 2L/Min ；.
Buy It Now
$324.10 Shipping Condition: New Location: China
Buy It Now
$100.00 Shipping Condition: New Location: China ZDBT-4 1200W 2000W 2500W. ZDBT-6 2000W 2800W 3500W. (This product is 220V only). With automatic and foot switch heating. Built-in pump. W ith crucible, ... morewith current indication.
Buy It Now
$400.00 Shipping Condition: New Location: China Model: 15KW. Mould heating. With high efficient and energy-saving, and it has high factor and power efficiency. Oscillation Frequency: 1-10 KHz. Duty ... moreCycle: 100%. Output Current: 200A-1500A. With 100% full load design, it can work continuously for 24hours.
Buy It Now
Free Shipping Condition: New Location: China 220V 15KW 30~80KHz High Frequency Induction Heater Furnace. 15KW High frequency induction heater furnace. This item only has 220V single phase 50-60HZ. ... more3 、 Cooling water demand:hydraulic pressure ≥ 0.2Mpa, flux ≥ 2L/Min ；.
Buy It Now
Free Shipping Condition: New Location: China ZDBT-3 2000W. 1 x 2000W High-frequency Induction Heating Machine Tool Kit. With automatic and foot switch heating. With crucible, with current indication. ... moreModel Power. Weight: 7kg.
Buy It Now
$595.00 Shipping Condition: New Location: China 15KW Dual Station Induction Heating Machine. Weight (Gross). Tks for your understanding and cooperation. Tt is available for ultraviolet temperature detection. ... morewhich can realize the automatic ciontol of temperature ,improve the heating performance and simplify the manual operation.
Buy It Now
$300.00 Shipping Condition: New Location: China Induction Heating Power: 30KW. 1x 30KW High Frequency Induction Heater Furnace. Fluctuating Frequency:30~100 KHz. heating temperature: 2200 (3992 ). Flow ... moreRate of Cooling Water: 0.06 - 0.12 Mpa 7.5 L/Min.
Buy It Now
$309.00 Shipping Condition: New Location: China 18KW High Frequency Induction Welding Machine Good Quality 220V MIG Welder. Output oscillation frequency. Cooling water flow. Duty cycle. Standard output ... morepower. the power of the device. Input current.
Buy It Now
$400.00 Shipping Condition: New Location: China Product Title Easy Add-on Products Welcome- CNC Router Engraving Machine Welcome- CNC Stepper Motor Drive Board Welcome- CNC Interface Board Welcome- ... moreCNC Stepper Motor Welcome- CNC Driver + Motro Kit Welcome- CNC Controller Welcome- Other CNC Products 15KW 30-80KHz Mid-Frequency Induction Heater Heating Melting Furnace System Product images Product Details International Buyers– Please Note Please open the package and check if there are some damages before sign. If there are some damages, please do not sign and contact us immediately. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. Description Technical Parameters 1. MOSFET possession and use of Fujitsu Siemens IGB power and unique control of the second generation of inverter technology. 2. Adjustable heat insulating power of the course of time will help improve the quality of the heating and the heating repetitive. Simplified operation of the technical workers. 3. Simple to install. Connect to the single-phase 220V power supply water to the water a few minutes to complete. 4. Covers an area of very small. Easy to operate, a few minutes to learn to special security, lower than the output voltage 36V, high-voltage electric shock from dangerous 5. Heating efficiency up to 90% more than in high-frequency vacuum tube machines 70% standby power under almost no electricity. And 24-hour continuous use. 6. Disassembly of an induction loop free. Easy to replace. Ultra-fast heating significantly reduce the rate of oxidation of the workpiece deformation. 7. Replaced by gas or other dangerous gases no open flame heating production. More in line with the national fire safety regulations Technical Parameters Work power 220V 50-60HZ Output power oscillation 15KVA Oscillation frequency output 30-100KHZ Current heating 150-600A Current insulation 150-600A Cooling wat
Buy It Now
$620.00 Shipping Condition: New Location: China Model: 3KW. Tooling welding, paper cutting knife quenching. Welding hard alloy saw blade. Oscillation Frequency: 200-1200KHZ. Duty Cycle: 80%. Output ... moreCurrent: 3A-12A.
Buy It Now
$759.00 Shipping Condition: New Location: China 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine ... moreis simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
Buy It Now
$445.00 Shipping Condition: New Location: China Oscillation frequency: 30-100KHZ. Reduce power load and capacity, and save energy for you. Output current: 20-120A. Water temperature protection point: ... more40℃. Weight: 35kg.
Buy It Now
$455.89 Shipping Condition: New Location: China 3 、 Cooling water demand: hydraulic pressure ≥ 0.2Mpa, flux: 2~5L/Min ；. 2 、 Surging frequency reaches 30KHz ～ 80KHz ；. 4 、 Easy installation and convenient ... moreoperation ；. 1 、 Most input resonance power:25KVA ；.
Buy It Now
$360.00 Shipping Condition: New Location: China 1 x 15KW 1500° High Frequency Induction Heating furnace Machine. With 100%load design, can work in 24 hours without stop. Induction Heating Power:15KW. ... moreThe higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
$595.00 Shipping Condition: New Location: China Note: Please contact us before purchasing the item. After confirming everything（ product detailed info& delivery time） Then placing the order, thus ... moreit will save lots of time and avoid trouble. Thank you. 1.Please tell us the voltage you need 2.Please tell us the size of the heating material.It will be better if you can send us a draft to show the size,please label out the size unit(for example:inch) NOTE： we don't ship the item to PO BOX address， and we only ship the item to English address. S please leave us your physical English address when you pay. 15KW Dual Station Induction Heating Machine Major Features： 1. It adopts the most advanced Mos.IGBT freqyency conversion control technologies to ensure the high efficiency and maximum output power 2. It has the constant current and power control function. Which can significantly optimize metal heating process,realize the high efficient and fast heating and bring into play the superior performance of the products. 3. It ha the function of three-stage time setting repressentd by heating-heat preservation–cooling.Furthermore. The poer for heating and heat preservation is available for independent regulation.which can facilitate the heating and heat preservation, which is applicable to places requiring bulking and repeated heating. 4. A maxi mum ten types fault protection and display of over–current. Over-voltage, water shortage and phase missing can provide higher reliability and durability. 5. It is safe and reliabe. And requires no equires no equipments of ten thousand voltage, and thus can ensure the safe operation. 6. The comprehensive full load design is avaiabe for 24-hour continuous operation, 7. Tt is available for ultraviolet temperature detection.which can realize the automatic ciontol of temperature.Improve the heating performance and simplify the manual operation Technical Parameters: Work Power AC220V50-60HZ Output Power Oscillation 15KVA Oscillation frequency output 30-100KHZ Current heating 200-600A Current Insulation 150-600A Cooling
Buy It Now
$322.99 Shipping Condition: New Location: China Output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor is used ... moreafter the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Buy It Now
$273.60 Shipping Condition: New Location: China Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor ... moreis used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Buy It Now
$240.00 Shipping Condition: New Location: China High Frequency Induction Heater Furnace Stainless Steel Heating Machine. With 100% load design, can work in 24 hours without stop. The higher the frequency, ... morethe shallower the heating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
$659.00 Shipping Condition: New Location: China Note: Please contact us before purchasing the item. After confirming everything（ product detailed info& delivery time） Then placing the order, thus ... moreit will save lots of time and avoid trouble Thank you. 1.Please tell us the voltage you need 2.Please tell us the size of the heating material.It will be better if you can send us a draft/picture of the heating material with size&szie unit 30KW High Frequency Induction Heating Machine Major Features： 1. It adopts the most advanced Mos.IGBT freqyency conversion control technologies to ensure the high efficiency and maximum output power 2. It has the constant current and power control function. Which can significantly optimize metal heating process,realize the high efficient and fast heating and bring into play the superior performance of the products. 3. It ha the function of three-stage time setting repressentd by heating-heat preservation–cooling.Furthermore. The poer for heating and heat preservation is available for independent regulation.which can facilitate the heating and heat preservation, which is applicable to places requiring bulking and repeated heating. 4. A maxi mum ten types fault protection and display of over–current. Over-voltage, water shortage and phase missing can provide higher reliability and durability. 5. It is safe and reliabe. And requires no equires no equipments of ten thousand voltage, and thus can ensure the safe operation. 6. The comprehensive full load design is avaiabe for 24-hour continuous operation, 7. Tt is available for ultraviolet temperature detection.which can realize the automatic ciontol of temperature.Improve the heating performance and simplify the manual operation Technical Parameters: Input voltage 380V-480V 50-60HZ Maximum input power 35KVA Maximum output power oscillation 30KW Output control Constant current mode Temporary rate set 100% Constant power mode Cooling water pressure 0.12MPa Oscillation frequency output 30-100KHZ Cooling water temperature Water flow 6L/MIN Weight Host 21Kg Volume Host 580*2
Buy It Now
Free Shipping Condition: New Location: China 15KW High Frequency Induction Heater Furnace Major Features： 1. It adopts the most advanced Mos.IGBT freqyency conversion control technologies to ensure ... morethe high efficiency and maximum output power 2. It has the constant current and power control function. Which can significantly optimize metal heating process,realize the high efficient and fast heating and bring into play the superior performance of the products. 3. It ha the function of three-stage time setting repressentd by heating-heat preservation–cooling.Furthermore. The poer for heating and heat preservation is available for independent regulation.which can facilitate the heating and heat preservation, which is applicable to places requiring bulking and repeated heating. 4. A maxi mum ten types fault protection and display of over–current. Over-voltage, water shortage and phase missing can provide higher reliability and durability. 5. It is safe and reliabe. And requires no equires no equipments of ten thousand voltage, and thus can ensure the safe operation. 6. The comprehensive full load design is avaiabe for 24-hour continuous operation, 7. Tt is available for ultraviolet temperature detection.which can realize the automatic ciontol of temperature.Improve the heating performance and simplify the manual operation Technical Parameters: Work Power AC220V50-60HZ Output Power Oscillation 15KVA Oscillation frequency output 30-100KHZ Current heating 200-600A Current Insulation 150-600A Cooling water pressure 0.06-0.12Mpa 7.5L/Min Input current 5-32A Temperature ＜ 40 ℃ Weight(Gross) About 30kg Size 530 × 200 × 450mm Major Scope of Application: Welding of big and small gears of hard alloy saw blade; Welding and annealing of spectacle framc and fittings; Welding of jewellerics.Clock and fittings; Electric industry(tin and silver soldering of fine wire.Various electronic elements) Electromcchanical industry(silver and braze welding of fine metal joints as well as quench tempering for mini motor shaft) Wire material industry(annealing of wire mate
|
|
|
|
ABB Induction Melting Furnace - Foundry Duty
ABB Induction Melting Furnace Model Smart FS Series 250 Kw. 1000 Hz 2000 lb. Furnace Hydraulic Pump. Power Cables, Water Pumps Remote Operators Stand. With PLC 300 Kva Transformer. 3 Phase Books and Manuals New in Year 2002*Take advantage of this special low inventory reduction price!
|
|
|
RJ HARVEY Induction Furnace
Don't like our price? Make us an offer! Item Description: RJ HARVEY Induction Tube Furnace. As pictured. This item does power on. But has not been tested with anything in it. Temperature control on left of machine does seem to respond to heating up. Everything pictured is included. There is a tube of glass that runs through the machine and is removeable. The outer tube is intact, but the smaller inner tube appears to be broken. You can see the end where it is broken in one of the pictures. About Free Shipping: Free shipping is only for domestic shipping to the lower 48 states to a physical(ie. non PO Box) address deliverable by Fedex/ UPS ground. If you only have a PO Box or live in Alaska. Hawaii, or other, please contact us regarding the difference in the shipping cost. Please let us know if you have any questions. About our Feedback: ... morePlease do leave us good feedback on all our categories. Unfortunately. Ebay has made it more difficult for smaller sellers and so anything less than perfect actually counts against a seller. Please let us know if there is anything we can do to accomodate so you can provide us with top ratings on all our categories! If there are any problems or questions, please do not hesitate to ask! Powered by
|
|
|
Inductothern Induction Furnace
INDUCTION FURNACE. High frequency melting system manufactured by INDUCTOTHERM® complete with VIP Power-Trak and Power-Melt systems. This system is now installed complete and is available for immediate dismantling and shipment to your location anywhere in the world. The system includes 3 zone vacuum heating coil, 24” I.D. and 90” oval and has been used as a silicon induction melting system for manufacturing solar energy components but with many alternative applications for industry. J898.90) All Mohr Corporation Auction Items are sold“AS-IS” and“WHERE-IS” and“without warranty or guarantee expressed or implied. All successful bidders at Mohr Corporation Auctions must pay for purchases in full within seven(7) days from end of auction. Purchases must be removed moved within fourteen(14) days from end of auction unless other arrangements ... morehave been agreed to in writing by Mohr Corporation. Mohr Corporation accepts the following methods of payment: Bank Wire Transfer. Approved company check, and PayPal. All payments must clear to Mohr Corporations account prior to removal and shipment of purchases. Following payment in full by Mohr Corporation. Customers will be provided the location address for pick-up/shipment of purchases. All scheduled removal of machinery and equipment must be made through Mohr Corporation and comply with prevailing regulations on site which is generally a manufacturing facility to which Mohr Corporation is under exclusive contract as liquidating sales agents for sale of the assets offered. Mohr Corporation will assist buyers to identify any required contractors and other assistance for removal and shipment of purchases to the buyer’s shipping destination globally.
|
|
|
50KW Induction Melting Furnace (Complete system)
Turn key melting setup. I used this in my foundry for casting Steel, Stainless Steel, Nickel, Iron. Bronze and German Silver. For sale here includes Induction power supply with both lift and tilt coil furnaces. Fiberglass cooling tower, 3hp water pump and switchgear to select coil. Pickup or arrange shipping. 50KW at 3KHZ.
|
|
|
ROBOTRON 125 KVA INDSUTRIAL HEAT INDUCTION FURNACE
Nice ROBOTRON 125 KVA Heat Industion Unit With Coolant System Call Jim for more info 714 6121480 o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13f1f82d69f-0xfa-
|
|
|
125 kW, 3 kHz Induction Power Supply for melting furnace
125 kW. 3 kHz, INDUCTION SOLID STATE POWER SUPPLY Originally manufactured by Inductotherm OFFERED BY: ITC INDUCTION TECHNOLOGY CORPORATION 9924 Rancho Road. Adelanto, CA 92301 Phone: 800-828-9799 Fax: 760-246-4366 Website: www.inductiontech.com Email: kerry_miller@inductiontech.com 125 kW. 3 kHz Inductotherm VIP Mark IV Power Supply with(2) Furnace Selector switches Power supply has been reconditioned by ITC. Power Supply has visible cosmetic wear and tear from use. Power Supply is being sold as: Reconditioned. Guaranteed to be functional” All Sales Final! WARRANTY RECONDITIONED EQUIPMENT This is used equipment that will be disassembled to the point necessary to replace defective or inoperative components and ascertain that other components are functional. ITC will make an effort to assure that all parts are functional and the equipment is ... moreattractive. ITC reserves the right to determine which components will be cleaned. Changed, replaced or repaired. Some components may be new. Used, reconditioned, remanufactured or original. It is our intent to furnish reconditioned equipment that is functional and attractive. That will give reliable service. Buyers are cautioned that the terms” functional” attractive” and“reliable” are subjectively used and may not agree with customers definition. Reconditioned equipment is guaranteed to be functional for a period of three(3) months from date of start-up service or six(6) months from date of shipment. Whichever comes first. Power supply is fully operational and available for inspection prior to sale. System is located in Adelanto. Ca. Spare Parts. Field Service, and Technical Support Are Available For Everything ITC Sells ITC can also supply melting furnaces. Water cooling and recirculating systems, and water cooled power cables for use with this power supply. Please see our website for more details: www.inductiontech.com Buyer is responsible for all shipping arrangements and freight charges. ITC does not do prepay and add for freight. NOTE: This equipment must ship via
|
|
|
NEW Italimpianti Induction Melting Furnace for Gold and Silver Alloys – 6 kg Au
Gold International Machinery Corporation | NEW Italimpianti FIM/5NT Melting Furnace for Gold and Silver Alloys– 5.1 kW. 6 kg Au, Manual Extraction S/N 1192 Our Inventory Number: 6677-185 Technical Specifications: 220v/ 3 phase/ 50/60 cycle, absorbed power kW 5.5, power output kW: 5.1, capacity of graphite crucible(kg Au) 6, melting time at max load(minutes) from cold: 15, temperature measurement: T/O, required cooling power(frig/h) 1700, minimum flow rate@ 25°C(l/min) 6, dimensions(mm) 485x510xx915, weight: 190 kg, Crucible Dimensions: Int. diam. 60 mm, Ext.diam. 80 mm, Int. height 125 mm, Equipped With: Comes with 6 graphite crucibles, Thermocouple, Features: Absolute alloy homogeneity guaranteed by the medium frequency converter, Reduction of melting losses due to uniform temperature distribution on the melting material. This avoids ... morethe‘skin effect’ typical of high frequency converters, Better malleability of the alloys allowing for considerable section reductions without annealing, Possibility to use different types of crucibles including graphite. Clay-graphite, silicon carbide, etc. Automatic temperature control by immersion thermocouple or optical pyrometer, Automatic power control regardless of quantity or type of metal, Computerised alarm diagnostics available in four languages with trouble-shooting guide lines. Automatic turn-off function for the furnace and cooling plant if not used for a certain amount of time, Pouring can be done by manual extraction of the crucible. Tilting by handwheel or hydraulic tilting, A closed cycle deionization system for cooling water is available as a standard feature on the larger furnaces. This system greatly reduces maintenance operations on these plants. This item is in very good condition! We will partially crate this machine for $225. We will skid& cover this machine for $145. As always we will load your truck for free from our loading dock Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned mac
|
|
|
LECO Induction Furnace
This is a used Leco induction furnace. When I plugged it in the front columns became hot but I don't know how to test it further so it is being sold as is with no warranty or right of return. I have no information about this unit other than it was a County surplus item and was sold to me in the condition shown. PLEASE feel free to contact me if you want me to run specific tests on this item. Or if you wish to discuss price and payment terms. My goal is 100% customer satisfaction. Each sale, every sale. If there is a problem of ANY sort, please contact me- just use the contact the seller feature- IMMEDIATELY. I will make every reasonable effort to accommodate you both before and after the auction. Please resolve any questions about the item. Payment, shipping etc BEFORE bidding- just use the contact the seller feature- thanks. eBay says ... morethat I may accept payment through Paypal only. If you would like to discuss this policy please contact me. I guarantee that unless stated you will receive the actual item in the picture and that the description will be materially accurate. Please have payment to me within 10 days of the auction end. If you have a net negative feedback please email me before bidding so we can cover all the details so that this auction will earn you a positive feedback. YOU MUST HAVE A CONFIRMED ADDRESS TO PAY WITH PAYPAL IF YOU LIVE IN THE USA! SHIPPING TIMES AND TERMS. SALES TAX, CUSTOMS Shipping quotes are for US customers in the 48 contiguous states only; there may be an additional charge for shipping to Alaska Hawaii or Puerto Rico. If you need an advance or overseas shipping quote just email me your zip code or address. If the S&H amount is not quoted as a flat rate. And you are a US customer, please use the shipping calculator provided by eBay to determine the shipping and handling charges to your home or business. A note about shipping times: I do try to ship promptly(check my feedback) but there are times when an item. Especially one that requires extra packing attention or is large
|
|
|
750 kW, 1 kHz Power Supply & (2) 2000 lb. Induction Furnace Melting System
System is 100% complete and excellent for any new start-up or expansion operation for melting ferrous or non-ferrous metal alloys. Normal 0 false false false EN-US X-NONE X-NONE 750 kW. 1 kHz, INDUCTION SOLID STATE POWER SUPPLY WITH(2) 2000 LB. MELTING CAPACITY FURNACES& WATER SYSTEM Originally manufactured by Inductotherm in 1991 OFFERED BY: ITC INDUCTION TECHNOLOGY CORPORATION 9924 Rancho Road. Adelanto, CA 92301 Phone: 800-828-9799 Fax: 760-246-4366 Website: www.inductiontech.com Email: kerry_miller@inductiontech.com Inductotherm Power Supply: 750 kW. 1 kHz Output power rating with Z-Board technology WITH(2) 2000 lb. melting capacity hydraulic tilt box type furnace. Includes: Hydraulic power pack· Hydraulic lids on the furnaces· Spare furnace coil· 1) 2 pc. Graphite crucible· 1) Silicon Carbide crucible Water-Cooled ... morePower Cables Interconnecting Buss Switch Gear for connecting Transformers(2) Delta Y Line Isolation Transformers with electrostatic shields: 480/480 Volt. 990 KVA· 12470/460 Volt. 850/977 KVA Complete External Closed Loop Water Cooling and Recirculation System consisting of: 2) Liebert Dry Type Fluid Coolers with 6 fans each· 7.5 Hp Water Pumps. 1) main& 1) backup pump with all interconnecting piping· Compact Motor Control Center The Power Supply. Furnaces, and Water-cooling and Recirculation System Are Offered As: USED. AS-IS" All Sales Final! System is fully operational and available for inspection prior to sale. System is located in Glassport. Pennsylvania(approx. 10 miles South of Pittsburg) Spare Parts. Field Service, and Technical Support Are Available For Everything ITC Sells Buyer is responsible for all shipping arrangements and freight charges. We do not"prepay and add" freight charges to the invoice. NOTE: This equipment must ship via- Flat-Bed. Air-Ride and be Fully Tarped. Contact: Kerry Miller to make an appointment to pick up the equipment. We have a multitude of contacts to assist you with obtaining the best possible freight r
|
|
|
LEPEL INDUCTION FURNACE AND WATER CHILLER 7.5 KW, 460 VOLTS 3PHASE
LEPEL INDUCTION FURNACE AND CHILLER MODEL T-7.5-3-KC-A-SW. SER# 6642, COULD BE USED AS 2 STATION INCLUDES 2 COILS. SWITCH, HOSES VOLTAGE 460 VOLTS 3PHASE. 21 AMPS, 17 KVA FURNACE DIMENSIONS 30 X 42 X 66" HIGH CHILLER DIMENSIONS 26 X 32 X 36" HIGH. WAS REMOVED FROM THE FACTORY IN WORKING CONDITION. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-140eb050870-0x100-
|
|
|
Nice7kW High Frequency Induction Heater Furnace Miller Cooler Chiller Coolmate 3
Very nice 7 kw induction heater with miller cooler chiller coolmate 3 together with a rolling cart. Foot pedal and one heating coil is up for sale. The unit works like a charm and we have used it for brazing and soldering applications. The cart will not be shipped if you require shipment otherwise if picked up locally it will be included in the sale. Coolmate™ 3 115 VAC. 50/60 Hz For use with water-cooled torches rated up to 600 amps. Runs on 115 VAC. Unique paddle-wheel indicator. External filter and easy-fill spout. 3 gallon capacity. Induction Heater Water Flow 1.2 gal/min 4.8 L/min Auto Heating Time 1 to 99 seconds Output Frequency 30 to 80 kHz Auto Retaining Time 1 to 99 seconds Input Voltage 230 V Single Phase Auto Cooling Time 1 to 99 seconds Output Power 7 kW Air Cooling Rear Fan Input Power 8.75 kVA Water Pressure 40 psi ~ 0.28 Mpa ... moreWater Protection Pressure and Temperature Switch Output Current 600 A a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-141e604de20-0xf7-
|
|
|
A274 Fasco Trane Inducer Induction Motor Furnace X38040311-01 70623973
Taken off of working trane unit 208-230v.034amp 3500rpm
|
|
|
Vacuum Induction Melting Furnace - INDUCTOTHERM
This auction is for an INDUCTOTHERM(VIM) Vacuum Induction Melting System Taken from GE surplus. Everything included, buyer to supply water cooling system. The system includes: VIP Power Trak Induction Power Supply. 125-30, S/N 80-75075-246-11, 125 Kw. 3.2 Khz, 460/3/60, 400 Volt Output Capacitors. Enclosed Water Pump in Power Supply. Books. Manuals, and Drawings GCA Corporation Vacuum Control System Series 4300 Vacuum Induction Melting Furnace Rated at 50 Lbs. Mold Lift Mechanism Mechanical Rough Pump. 300 CFM Refrigeration Unit Stokes Diffusion Pump Hydraulic Pump GCA Control Panel Steel Cabinet with Parts All GCS Books. Manuals, and Drawings
|
|
|
gas furnace induction fan
Bidding for a induction fan/motor/pressure tube. Manufacturer Part# S1-2702321P. USA shipping only.
|
|
|
400 kW, 1 kHz Induction Power Supply for melting furnace or heating coil
400 kW. 1 kHz, INDUCTION SOLID STATE POWER SUPPLY Originally manufactured by Inductotherm OFFERED BY: ITC INDUCTION TECHNOLOGY CORPORATION 9924 Rancho Road. Adelanto, CA 92301 Phone: 800-828-9799 400 kW. 1 kHz Inductotherm VIP Mark IV Power Supply, 1250 output voltage capacitors Power Supply has(2) Furnace Selector switches. Ground and leak detection, and kilowatt hour counter Power supply was reconditioned by ITC in 1995. Power Supply has visible cosmetic wear and tear from use. Power Supply is being sold as: Used. AS-IS” WARRANTY INFORMATION* USED EQUIPMENT. AS-IS” This is equipment that has been in service for a period of time and is being sold“AS-IS” Used equipment may be described as“excellent” good” or“fair” condition. And buyers are cautioned that these classifications are determined subjectively by ITC and may or may not agree with ... morecustomer’s definition of these terms. Power supply is fully operational and available for inspection prior to sale. System is located in Located in Tijuana. Mexico- Near San Diego. Ca. US border. Spare Parts. Field Service, and Technical Support Are Available For Everything ITC Sells If you have any questions regarding this power supply’s compatibility with your existing heating coil. Melting furnace and/or water cooling system, we will provide free engineering services to check for you. ITC can supply melting furnaces. Heating coils, water cooling and recirculating systems, and water-cooled power cables for use with this power supply. Please contact ITC for more information. Buyer is responsible for all shipping arrangements and freight charges. ITC terms does not include prepay and add for freight. NOTE: This equipment must ship via- Flat-Bed. Air-Ride and be Fully Tarped. Contact: Kerry Miller to make an appointment to pick up the equipment. We have a multitude of contacts to assist you with obtaining the best possible freight rate to your location. Approximate shipping weights and dimensions are available for obtaining freight quotes and making shipping a
|
|
|
Induction Furnace Barely Used Melting Gold Bronze Silver
Barely used less than 12 hours. We used it to melt bronze and white brass Can be viewed under power Requires water cooling Will melt nearly 11 lb of bronze and 22 lb of gold Bought a year ago for 13500 Plus 200 for a crucible carrier Will include 2 crucible Will attach to a pallet for shipping You are responsible for freight arrangement and freight cost. You can pick up free Item is in our foundry in Warwick RI Machine is European made with a CE CERTIFICATION We can help by recommending freight You will need a tailgate truck Induction machines for melting of all metals. Including precious and non-precious metals and alloys. The machines are designed in accordance with the CE safety regulations and are equipped with the necessary devices to ensure safe operation. Temperature probe under the crucible Power Regulation Power indicator Graphite ... morecrucible Temperature reader Efficient circuit with low energy consumption Reliable. Easy to maintain and service Easy to install and simple to operate Digital control panel with status and diagnostic messages Applications Jewelry production Various metal parts production Materials research Scrap melting Performance S10 Absorbed Power Max 10kW Output Frequency 20-40 kHz AC Line Current A(Max 30 A AC Line Volts(V rms) Line Frequency 50/60Hz 50/60Hz Weight 220 lbs/ 100 60x60x90cm 25.6" x 21.7" x 36.2" Max 10kg/ Gold Melting Temperature Max 1300 °C Buyer is totally responsible for safe operation and should be familiar with such by the purchase of the machine. Buyer indemnify sellers of any and all claims regarding the safe operation of the furnace in any matter Posted with eBay Mobile Posted with
|
|
|
Induction Furnace Melter , Melting Gold Bronze Silver 10 Kilo Seit Ultra-flex
Barely used less than 12 hours. Virtually new As of the posting selling on eBay for 13500. Payed total 13950 with add ons we put in the best crucible carrier made( 200$) gas dispenser(100$) plus 2 new crucibles(150$) you save nearly 4000 $ We used it to melt bronze and white brass Can be viewed under power Requires water cooling( faucet is fine with a water filter) no need for a chiller Will melt nearly 11 lb of bronze and 22 lb of gold Great buy for a great unit Will attach to a pallet for shipping You are responsible for freight arrangement and freight cost. But we can help by putting you in contact with a broker that always gives us great rates. You can pick up free Item is in our foundry in Warwick RI Machine is European made with a CE CERTIFICATION You will need a tailgate truck for pick up Induction machines for melting of all metals. ... moreIncluding precious and non-precious metals and alloys. The machines are designed in accordance with the CE safety regulations and are equipped with the necessary devices to ensure safe operation. Temperature probe under the crucible Power Regulation Power indicator Graphite crucible Temperature reader Efficient circuit with low energy consumption Reliable. Easy to maintain and service Easy to install and simple to operate Digital control panel with status and diagnostic messages Applications Jewelry production Various metal parts production Materials research Scrap melting Performance S10 Absorbed Power Max 10kW Output Frequency 20-40 kHz AC Line Current A(Max 30 A AC Line Volts(V rms) Line Frequency 50/60Hz 50/60Hz Weight 220 lbs/ 100 60x60x90cm 25.6" x 21.7" x 36.2" Max 10kg/ Gold Melting Temperature Max 1300 °C Buyer is totally responsible for safe operation and should be familiar with such by the purchase of the machine. Buyer indemnify sellers of any and all claims regarding the safe operation of the furnace in any matter,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-146d18f1d86-0x10a-
|
|
|
FL109668 Minco Rotocast 500 Induction Melting Furnace
Click to Enlarge) Product ID# FL109668 You are looking at a Minco Induction Melting Furnace. Model# Rotocast 500. It appears to be in fair cosmetic condition showing signs of previous use. Please refer to the pictures for more detail. This item requires a 240v power source which I do not have, so I was unable to power it on. Since I do not know if this item is fully functional, it is being sold for either parts or repair. Unfortunately I do not have any way of actually testing out this item and it is being sold untested as is. Please note that this does not include any other parts, cables, or accessories. The unpacked dimensions of this item are 30x38x50. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise ... morestated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 646 pounds Buyer pays freight plus a fixed handling fee of 50 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We res
|
|
|
Furnace Draft Induction Motor Fan Blower Squirrel
Used one year then my heat exchanger broke so I scrapped the 80% efficiency furnace and kept this induction fan. Not enough time for it to get dusty even and works fine. Some pink gasket is still on the fan but the rest stuck the the furnace. Picture shows. Comes with vacuum switch hose. Don't buy new when you don't have to. Save money and get this universal fan, install it and forget it. The tag reads: Jakel INK J238-112-11258. 115V 60Hz. 1.4FLA 1.9LRA. T.P.L B. TP 3000 RPM. Cont. Duty.
|
|
|
CEIA INDUCTION MELTING FURNACE MODEL F9-D, GOLD MELTING CAPACITY 10 KG
CEIA MEDIUM FREQUENCY INDUCTION MELTING MACHINE MADE IN ITALY MODEL F9-D. SER. 20000835009 FEATURES INFRARED OPTICAL TEMPERATURE SENSOR FOR TEMPERATURE CONTROL, STAINLESS STEEL CONSTRUCTION, GAS BLOW PIPE TO PREVENT MOLTEN METAL OXYDATION, DIGITAL POWER ADJUSTMENT AND INDICATORS, 1 NEW CRUCIBLE INCLUDED. MELTING CAPACITY 10 KG 18K GOLD OR 7 KG SILVER, MAXIMUM POWER 9.5 KW VOLTAGE 220 VOLTS 3 PHASE, THE MACHINE IS TESTED AND IN EXCELLENT OPERATING CONDITION. DIMENSIONS(EXCL. SENSOR AND BLOW PIPE ASSY. 24 X 24 X 36" HIGH, WEIGHT 220 LBS. WE SHIP WORLDWIDE 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14764e2c7a2-0x110-
|
|
|
Warner Power 150Kw SCR Control DC Power Supply Induction Furnace Heat Treating
800-380-4913 SKU: IP3516 Warner Power 150Kw SCR Control DC Power Supply Induction Furnace Heat Treating. Brand: Warner Power Size: 150Kw Condition: Used Notes: 30 Day Warranty. Units were installed but never used. In perfect condition Model: 65-002152 Type: Induction Furnace Metals Finishing Power Supply Other: Siemens Touchpanel S7-1200 PLC Control System Series: Furnastar Communications: EtherNet. Profibus, ProfiNet, Modbus, RS-485 Enclosure Type: Nema 1 Phase: 3 Phase Flow Rate: 4.0 GPM Input Voltage: 440/460V AC Input Amperage: 272/261 Amps Serial Number: 06836-4A MFG Date: 2012 MPN: 65-002152 Warner Power Dual Zone 150Kw Furnastar Induction Furnace& Heat Treating SCR Controlled DC Power Supply. This unit was installed. Tested, never used in production. It is perfectly clean inside& out. It is equipped with Siemens Simatic 6AV6647-0AD11-3AX0 ... moreHMI Touchpanel Interface& Siemens S7-1200 PLC Controls. All software is included. Zone 1: 125Kw Output: 0-60Vdc Amps: 2083 Adc Zone 2: 25Kw Output: 0-60Vdc Amps: 416.7 Adc Main Circuit Breaker: 400Arms. 3Ph, 600V Short Circuit Breaker: 35kArms Symmetrical. 480V max Impulse Withstand Voltage: 4 kv Insulation Voltage: 600 Volts Max. Ambient: 40°C Mass: 2091 Kg Part# 65-002152 Date of Manufacture: 2012 Enclosure: Nema 1 Programmable Furnace and Heat Treating Power Supply Designed for Accuracy and Reliability High Current Low Voltage Single or Multiple Zone Power Supply The robust design includes precision RMS voltage and current measurements. Stable control, reliable SCR drives. An intuitive HMI for diagnostics, easy fi eld deployment. Calibration and loop tuning functions, and a wide range of remote interface protocols. The FurnaStar platform is fully programmable with up to 100 unique sequences programmable through the touch screen or via remote interface. Features• Single and multiple zone with independent controls• Fully programmable with up to 100 process steps• Integrated cooling• Analog and digital interface options• High precision RMS measurements• R
|
|
|
Warner Power Furnastar 150Kw Induction Furnace & Heat Treating Power Supply
800-380-4913 SKU: IP3532 Warner Power Furnastar 150Kw Induction Furnace& Heat Treating Power Supply. Brand: Warner Power Condition: Used Notes: 30 Day Warranty. Unit was installed but never used in production. Model: 65-002187 Type: Induction Furnace& Heat Treating Power Supply Other: Siemens S7-1200 PLC& HMI Interface Series: Furnastar Phase: 3 Phase Input Voltage: 460Vac Input Amperage: 261 Amps Output Voltage: 125Kw Output: 0-60 Vdc@ 2083 Adc Serial Number: 06836-9BA Secondary Output: 25Kw Output: 0-60 Vdc@ 0-416.7 Adc Manufacturer: Warner Power Frequency: 3 MPN: 65-002187 Used Warner Power Furnastar Series 150Kw SCR Controlled DC Power Supply for Induction Furnace. And Heat Treating Applications. This unit was installed in 2012 and was never used in full production. It still has the tags. It is equipped with Siemens S7-1200 ... morePLC Controls and HMI User Interface. We have contacted the manufacturer and it can be programmed to function in several different applications. We have all the software and wiring diagrams that go to this unit. In total we have 4 power supplies of slightly differing models, but all with the same capacity and output. Make us an offer for one or the whole lot! Industrial Parts R us is a fast growing Internet wholesale outlet for surplus parts and industrial equipment. We are conveniently located in Central Kentucky. And ship worldwide. The majority of our customers buy our equipment for resale to the end user. We make every effort to keep our overhead low so we are able to pass on the lowest prices in the industry. EXPERIENCE Our staff has a combined 40+ years of industrial control engineering. Factory maintenance and security. EDUCATION On our staff we can boast of a Master Contractor. Journeymen Pipefitters, Journeymen Electricians& Security Specialist. All with college hours& apprenticeship training. SKILLS Industrial Maintenance. Electrician, HVAC Maintenance, Control Design, Boiler Maintenance, Security& Public Safety, Welding, Machinery Moving/ Removal. Industri
|
|
|
Across International 15KW Induction Heater Furnace IH15AB
Up for bid is an Across International 15KW(model IH15AB) portable electric induction heater with everything you see in the pictures. This is the largest single phase unit you can get and it runs on 220 volt single phase. I bought several from a test facility and was told they were used on one experiment and then surplussed. It should be a 2011 or 2012 model by the info I got from them. But not sure how to tell exactly(probably serial# It has the connectors for connecting the generator to the transformer. One of the leads has a crack in it and can be taped up as the crack is in the plastic and not in the wire. The coil will need the little brass fittings that are at any hardware store. Also you will need water lines and they are also available at any hardware store. It will also need a power cord. These minor items needed are typical when ... morebuying these, but I just want to be clear. I am no expert on these units so you may want to call the company if you have technical questions. What I do know is that these units are very versatile and can be used for many different purposes like forging, melting, casting, soldering, welding and brazing. There is also a huge assortment of coils and heating elements available from manf. If there is anything I can help with feel free to call 618-559-6011. We use both Fed Ex and UPS and we will use which ever one gets your package out and to you the soonest. The price will remain the same, but we always reimburse if over paid.
|
|
|
IECO Induction Melting Furnace Continuous Casting for Wire, Plate and Tubing
Item#8128-185 IECO Model 50.10M Induction Melting Furnace for Continuous Casting of Wire. Plate and Tubing You are bidding on a Item#8128-185 IECO Model 50.10M Induction Melting Furnace for Continuous Casting of Wire. Plate and Tubing TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please ... moreconsider the majority of our machinery and equipment is taken direct from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that you ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: Serial# 188/8
|
|
|
Induction melting furnace, 30 pound coil / box.
Induction melting furnace coil in box. 30 pound steel equivalent size. Was used in vacuum. Will work in air, or vacuum. Was used with 50 kW. 3 kHz, 400 volt power supply. 11 turn coil. We will remove ceramic crucible. Etc from ID as requested by buyer prior to shipment. Sold as is. We will load a truck. You pickup, or you arrange shipping, you pay for shipping on your account, we will work with your shipper and load their truck.
|
|
|
GOODMAN #D9868614 AMANA FURNACE BLOWER INDUCTION MOTOR ASSEMBLY FASCO #70624774
GOODMAN#D9868614 AMANA FURNACE BLOWER INDUCTION MOTOR ASSEMBLY FASCO#70624774. This was in service for the last three months and the furnace it was pulled from was replaced today. it is 100% functional and still in like new condition as the tenants have only recently began to use the heat to find out the furnace needed additional repairs. please ask any questions before purchasing, cross reference any part numbers and view pictures closely before purchasing, as always thanks for looking and good luck.
|
|
|
Fasco Furnace Draft Induction Motor For American Standard Trane
Fasco Industries Draft Inducer Blower Motor Assembly New Without The Box I purchased this for my broken American Standard furnace and installed it last summer. In December. I replaced the entire furnace but removed the blower fan to hopefully get some of my money back I paid over $150.00 in September 2014 Included is the transition plenum but it is not new I Guarantee this Electrical Item Bid Accordingly This commonly fits Trane& is a replacement for#s 7021-8428 7021-8013 7021-8924. 7021-9639, 7021-9055, 7002-2558, 7002-3273& J238-138-1344. Motor Specifications are: 115 Volts.95 Amps 3000 RPM Shaded Pole Ball Bearing 3.3" Diameter Motor Thermally Protected CW Rotation as viewing shaft end Wheel Size 4-3/4" x 1-5/16"
|
|
|
Conquest 800 Furnace Draft Induction Motor Mid Efficiency
This item was purchased in an attempt to solve a problem with our furnace. Something else was causing the problem. So it was on the furnace for maybe half a dozen uses. It is a like new mid efficiency Conquest 800 furnace draft induction blower for Rheem, Ruud or Weather King furnaces.
|
|
|
TILTING INDUCTION HEATING / MELTING FURNACE MACHINE / GENERATOR
Ceia INDUCTION HEATING GENERATOR TILTING MELTING FURNACE MACHINE WAS USED TO MELT GOLD/ PLATINUM/ SILVER PLEASE REFER TO PICTURES FOR DETAILS SHIPPING COST IS $500 ON TOP OF SALE PRICE FOR MORE INFORMATION FEEL FREE TO ASK ANY QUESTIONS
|
|
|
OPDEL FS10 INDUCTION HEATING / MELTING FURNACE MACHINE / GENERATOR
INDUCTION HEATING GENERATOR MELTING FURNACE MACHINE OPDEL FS-10N STAND-ALONE MELTER WAS USED TO MELT GOLD/ PLATINUM/ SILVER PLEASE REFER TO PICTURES FOR DETAILS SHIPPING COST IS $500 ON TOP OF SALE PRICE FOR MORE INFORMATION FEEL FREE TO ASK ANY QUESTIONS ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14c0b6d0593-0xfd-
|
|
 |