|
KNURLING TOOL HOLDER 1” SHANK, KNURL TOOLING
KNURLING TOOL HOLDER w/ 1" SHANK This auction is for the Knurling Tool shown in images. Shank is 1" Shank has writing on it. Provided in images. Was discovered as part of tooling for machine shop we are currently working hard to liquidate, in the little bag. There were also 2 black machine screws and washers in this bag, which we will also include(even though we were not able to tell where/ how these will be used. Comes as shown- that is the actual tool and all of its parts that will be mailed to winner of this auction- if there is any additional parts/pieces that don't go w/ this tool that is attached to it in images, then it will be included. PACKAGING: Knurling tool holder. And all additional parts shown in images will be carefully packaged for shipping. BIDDING: $11.99 w/ No Reserve. MEASUREMENTS: For more details of measurements. ... morePlease refer images where we have provided images with measurement devices, or ask us. MORE TOOLING: All month we're listing lots of machinist tooling- bits. Cutters, blades, tool holders of various kinds etc. for $0.99- so check our'other items' section- lot's of Brown& Sharpe Tooling, bits, cutters, etc. BEFORE BIDDING: Ask any questions prior to bidding. PLEASE: MAKE SURE YOU KNOW WHAT YOU ARE BUYING! ALL MONTH WE'RE LISTING LOTS OF MACHINIST ITEMS AND SOME ITEMS WE MAY HAVE LIMITED PERSONAL EXPERIENCE WITH. WE ARE DOING OUR BEST WITH THE DESCRIPTIONS SO PLEASE LOOK CAREFULLY AND BE SURE YOU KNOW WHAT YOU'RE BUYING IN CASE WE MADE A MISTAKE(IN ANY PART OF LISTING) THERE'S JUST A LOT OF STUFF- SOME IS VINTAGE AND NEVER USED- BOXES FULL OF TOOLING THAT SELL INDIVIDUALLY FOR +$100/EA. WE'RE LISTING THEM FOR $1 AUCTIONS, SO CHECK BACK AND LOOK CAREFULLY! see ad below) the ad: WE'RE L iquidating an ENTIRE METAL MACHINE SHOP LIQUIDATION BLOWOUT CABINETS FULL OF TOOLIN G LISTED BY THE POUND! CHECK OUR OTHER ITEMS SECTION- ALL MONTH payment/ checkout: Currently accepting PayPal. Please pay within two days from time listing ends- by pa
|
|
|
VINTAGE HUOT FRACTIONAL DRILL BIT BORING TOOL HOLDER CABINET MACHINIST TOOLING
DESCRIPTION: USED. EMPTY. HUOT FRACTIONAL(1/16-1/2 X 1/64) DRILL BIT CABINET. IT MEASURES 14 5/8 X 7 3/8 X 7 3/4 HIGH APPROX. THE DRAWERS OPEN AND CLOSE FINE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS ... moreAND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PO
|
|
|
HIRSCHMANN TOOLING H5.52 SWIVEL HOLDER
THIS IS A HIRSCHMANN H5.52 SWIVEL ELECTRODE HOLDER TO HOLD ELECTRODES
|
|
|
Ingersoll 764C034-20 L-4515348-A CAT Holder with V-Max 5VK6V-04295D3R10 Tooling
The listing price is for the tool pictured. Original Packaging or Containers May Not Be Included Offers& eMails: I will respond to all Offers and Email Messages Monday through Friday until 2:00pm Central Time. We are closed Weekends& Holidays. Offers expire within 48 hours. So if an offer is made after 2:00pm on Friday, it will expire before I am able to respond. PayPal: We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 3 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 3-5 business days. Payments received Thursdays after 2pm Central Time and Fridays. Weekends and Holidays will be processed on the next available business day. Item Information: Some items sold may have customer engravings on tools. But this does ... morenot affect the quality of the tool. Some pictures may show other items, but only the items described are included(i.e. carbide inserts, rulers,original packing, tools, etc. If the item is listed as"Seller Refurbished" or"Regrind" please be aware that exact dimensions of the tool may have changed in the grinding process and for special orders. Please ask questions before buying if this is a concern.From time to time, items have been misplaced or put back in use. We apologize for this in advance and will refund your money promptly if this happens. Refunds/Exchanges: We offer a 14-day Money Back Guarantee. Any items needed returned will receive a full refund(or if you prefer an exchange) And must be in the condition it was sold. Please advise us of any problems with purchases before returning or leaving feedback. We are here to make sure that you are a happy customer. We will pay the postage for all returns. Sales Tax: Please be aware that our company has a Physical Presence(Nexus) in AL. AZ, CA, CO, CT, FL, GA, IA, KS, KY, LA, MA, MI, MN, MS, MO, NY, NC, ND, OH, SC, TN, TX, VT, VA, WA and is required by law to collect and remit sales tax for all on-line sales
|
|
|
28 CRAFTOOL LEATHER TOOLING TOOLS WITH HOLDER, SNAP SETTERS, HAMMERS
This auction is for 28 Craftool leather tooling tools 27 are all metal. One has wood handle. There are also 4 snap/rivet setting tools, one is for the cap the other 3 have different size pegs for different size snaps or rivets. And there are 2 hammers, one is leather the other wood. Plus the holder for the tools. All look to be in good used condition. PLEASE READ- I AM A SMOKER. MARRIED TO A SMOKER, AND ITEMS I PUT ON MAY HAVE BEEN BOUGHT FROM A SMOKER. IF YOU ARE A NON-SMOKER, AND YOU DO BID, BE AWARE THAT THEY WILL SMELL LIKE SMOKE, AND YOU WILL PROBABLY HAVE A PROBLEM WITH THEM. ALSO, IF YOU DO BID AFTER READING THIS AND ARE NOT HAPPY WITH THE SMELL, I WILL NOT REFUND MONEY SINCE THIS IS PART OF THE DESCRIPTION. I only ship on Mondays. Due to work schedule. Can make exeption in emergencies. Thanks for looking.
|
|
|
PARLEC CAT 50 TB0506-1 TOOL HOLDER USA MADE CNC MILL MACHINE SHOP TOOLING
HELLO- YOU ARE PURCHASING THE PICTURED PARLEC CAT 50 TOOL HOLDER. IT IS USED. IT IS LABELED: PARLEC TB0506-1 USA 24484 PLEASE SEE THE PICTURE FOR ADDITIONAL INFORMATION OR PLEASE FEEL FREE TO SEND ME ANY QUESTIONS YOU HAVE. I USUALLY(95% OF THE TIME) SHIP ITEMS PAID FOR BY 3:00 EST THE SAME DAY. PLEASE EMAIL OR CALL IF YOU NEED SAME DAY SHIPPING TO VERIFY THAT I SEE YOUR PAYMENT. 937-475-3068 PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I WILL COMBINE SHIPPING ON SMALLER ORDERS. I WILL SHIP WORLDWIDE. THANK YOU! LM STOCK On Dec-06-07 at 12:01:27 PST. Seller added the following information:
|
|
|
CAT 50 TOOL CHANGING CLAMP & HOLDER CNC MILL MACHINE SHOP TOOLING
HELLO- YOU ARE PURCHASING THE PICTURED CAT 50 TOOL CHANGING CLAMP& HOLDER. IT IS USED. IT IS LABELED: 0823 PLEASE SEE THE PICTURE FOR ADDITIONAL INFORMATION OR PLEASE FEEL FREE TO SEND ME ANY QUESTIONS YOU HAVE. I USUALLY(95% OF THE TIME) SHIP ITEMS PAID FOR BY 3:00 EST THE SAME DAY. PLEASE EMAIL OR CALL IF YOU NEED SAME DAY SHIPPING TO VERIFY THAT I SEE YOUR PAYMENT. 937-475-3068 PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I WILL COMBINE SHIPPING ON SMALLER ORDERS. I WILL SHIP WORLDWIDE. THANK YOU! LM STOCK On Dec-06-07 at 12:01:27 PST. Seller added the following information:
|
|
|
FLY CUTTER HEAD TOOL HOLDER TOOLING, MILL, LATHE 5/16 " BITS, 3/4 SHANK ,2 " DIA
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE In this auction is offered vintage fly cutter for 5/16" bits. With 3/4" shank, 2" in diameter. There is slight wear from use. See pictures for better detail. Thanks for stopping by. Normal 0 false false false EN-US X-NONE X-NONE- Normal 0 false false false EN-US X-NONE X-NONE SHIPPING: All items are shipped via USPS. Priority mail comes with tracking information ... moreto check on the delivery status of your mailing. We ship next or not more than 2 business days after payment is cleared. International Shipping Policies Addendum: If not quoted at the end of auction. Bidder is to email me for exact shipping fee. Items will be shipped via USPS Priority Air Mail(this is the only service which comes with tracking information to follow the package) or economy priority flat rate and First class air mail(up to 4 pounds) All international sales are final, and no refunds, items sold as is. We will not be responsible for any international customs clearance. Duties, and taxes. Some countries are notoriously know for their slow or unreliable shipping service(Russia. Italy) We prefer to ship only registered priority to these countries so contact prior bidding is required. If you have any questions contact us. PAYMENT: Payment is to be received within three(3) days of the auction end. Winning bidder can expect their item to be shipped not more than 2 business days(usually next day) after payment is cleared. If I do not hear
|
|
|
MAS B-30-MTA3-90 KKS G0 Tool Holder - BT30 Holder takes MT#3 Tooling
This listing is for ONE(1) used MAS B-30-MTA3-90 KKS G0 Tool Holder For machines use BT30 Taper Holder system This holder takes MT#3 Taper Tooling Posted with ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1454725779e-0x10c-
|
|
|
EM HOLDING TOOLS R8 TOOL HOLDER 1 INCH milling Bridgeport tooling *16
EM HOLDING TOOLS R8 TOOL HOLDER 1 INCH milling Bridgeport tooling info/sizes: very good condition I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& ... moretracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
CAT 40 LYNDEX C4006-0312 CNC MILL TAPERED TOOL HOLDER TOOLING TOOLHOLDER OL44
UP FOR SALE IS ONE CAT 40 LYNDEX C4006-0312 CNC MILL TAPERED TOOL HOLDER TOOLING TOOLHOLDER OL44 AS SHOWN IN THE PICTURE IF YOU HAVE ANY QUESTIONS PLEASE A SK BEFORE BIDDING OR BUYING THANK YOU FOR YOUR INT EREST WE WILL ONLY SHIP TO A CONFIRMED A DDRESS INTERNATIONA L SHIPPING IS EXTRA- PLEASE ASK BEFORE BIDDING OR BUYING GOD BLESS
|
|
|
kwik switch 200 tool holder mill milling machine bridgeport universal tooling
Universal Eng. Inc. kwik switch 200 3/4" shell mill holder. The holder is in good condition. Use in many Bridgeport type milling machines. Take a look at my other items. Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1455f06eaba-0x10d-
|
|
|
KOMET HSK A 100 UA0600330 WITH ABS 63 FWD TOOL HOLDER CNC MILL TOOLING
HELLO YOU ARE PURCHASING THE PICTURED KOMET TOOL HOLDER. IT IS USED. LABELING ON THE TOOL READS: KOMET UA0600330 HSK A-100/ABS 63 INGERSOLL#784H034-03 U.S. PAT. 4976574 943671 ATTACHED PIECE READS: KOMET UA3000710 ABS 63 FWD HOLDER 943670 PLEASE EMAIL ME ANY QUESTIONS YOU HAVE. THIS ITEM DOES QUALIFY FOR MY FREE SHIPPING OFFER. FREE SHIPPING TO ANY U.S. STATE VIA USPS PRIORITY MAIL IF YOU BUY 5 OR MORE OF MY LISTINGS. SOME LARGE ITEMS DO NOT QUALIFY. THOSE LISTINGS WILL STATE THAT. THIS ITEM DOES NOT QUALIFY FOR MY FREE SHIPPING OFFER. CAN BE SHIPPED VIA PRIORITY MAIL FOR AN ADDITIONAL COST. CONTACT ME FOR A QUOTE. I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU! LOCATION: 5-2-C
|
|
|
2 x SPK Tool Tooling Tool Holder CSYNL 85 4D + Ceramic inserts as shown
2 x SPK Tool Tooling Tool Holder CSYNL 85 4D + Ceramic inserts as shown Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. I go to the post office at everyday at 1.00pm Monday- Friday. If an item is bought and payed for before then item will be send it the same day. If any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing
|
|
|
3/8" Hardinge Number 21 Mill Milling Machine Collet Tool Holder tooling
Item. Collet Manufacturer. HARDINGE USA made in the US America Size. 3/8" Overall length. 2-3/4" Condition. Nice used This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item ... moreto an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile Rd. NW Grand Rapids. MI 616-791-9395
|
|
|
Cat 40 Criterion Tooling Shank With Boring Head CAT40 M/N- CB3-CV40 Tool Holder
Our internal inventory number on this product is NP#ToolCartP PLEASE NOTE: We are listing several CAT50. BT40, CAT40, NMTB50, Komet, as well as Chucks, vices and misc. Everything goes so email us and we can send you the direct links to the ebay auctions! MAKE SURE TO EMAIL US TO NOT MISS OUT! DESCRIPTION: You are bidding on a Cat 40 Criterion Tooling Shank With Boring Head M/N- CB3-CV40- PLEASE LOOK AT PHOTOS CLOSELY- we aren't familiar with these tools and not sure of condition and if complete. App. Weight: 6 Lbs. Looks good. But has some SLIGHT oxidation from sitting around. I am NO EXPERT, what you see is what you get. Don't missout! We are listing several CAT50. BT40, CAT40, Komet, as well as Chucks, vices and misc. Everything goes so email us and we can send you the direct links to the ebay auctions! MAKE SURE TO EMAIL US TO ... moreNOT MISS OUT! NOTE* FREE SHIPPING& HANDLING to lower 48 States via Ground Service(USPS or UPS whichever is cheaper for us) All International Shipments pay $10.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested. We ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it leaves US land) Please understand if we ship an item on your account. We are unable to see what you are being charged for shipping. This is both FedEx and UPS rules. They do no
|
|
|
Armstrong Brothers tool holder ACE 1020 machinist tooling Lot # 15
Armstrong Brothers tool holder ACE 1020. Please see all photos for condition and content. Shipping USPS First mail to the USA. Pleas e Our Other Machine Tool Auctions. I will combine tools in flat rate boxes to save you money
|
|
|
CNC Tooling Kennametal Indexable Milling Cutter PN FPR66 A-74-1 6in Dia w/holder
CNC Tooling Kennametal Indexable Milling Cutter PN FPR66 A-74-1 6inch Diameter w/holder Used Condition- Good Condition See Enclosed Pictures Selling As Shown in Pictures
|
|
|
Williams 1-B Boring Bar Holder, Metal Lathe Tooling, 1B
Up for your consideration is a Williams# 1-B boring bar holder. It can hold 1/2” 3/4” and 1 1/8” boring bars. It’s 1 7/8” to the centerline and the“T” nut is 1/2” X 2 1/2” It’s in good condition showing normal use and has minor surface rust that should clean up very easily if so desired. It does not have any personal ID marks on it. The picture is of the actual item being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license. Payment must be made within 4 days.
|
|
|
VALENITE, TOOLING HOLDER, WITH INGERSOLL, QWIK INDEXABLE DRILL, YD
VALENITE TOOLING HOLDER V50CT-10SG-35 INGERSOLL QWIK TWIST INDEXABLE DRILL W/ INSERT YD 1050052C0R01 4 1/2 OVERALL LENGTH OF DRILL BIT PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ... moreAFTER SELLER AGREES TO SENDING THE ITEM BACK AND THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 9 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities Be sure to add us to your favorites list and check out our other items. HJL/8833/SKID#377/ 1) E
|
|
|
Armstrong 2B Boring Bar Holder, Metal Lathe Tooling
Up for your consideration is an Armstrong#1B boring bar holder. It can hold 9/16” 15/16” and 1 5/16” boring bars. It’s 2 3/8” to the centerline and the“T” nut is 0.480” X 2 1/4” It’s in very good condition showing normal use and rust is not an issue. It does not have any personal ID marks on it. The picture is of the actual item being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license. Payment must be made within 4 days.
|
|
|
UNIQUE! Clayton Mfg Co Boring Bar Holder, Metal Lathe Tooling
Up for your consideration is a Clayton Mfg Co boring bar holder. It has a Pat#US2333228A. Its unique design allows you to hold any round sized boring bar from 1/2” to 1 5/32”and with very sturdy construction. It’s in excellent condition showing normal use. The only thing I see to mention is the name tag is now illegible. It’s 2 3/32” to the centerline and the“T” nut is 1/2” X 2 1/2” It does not have any personal ID marks on it. The pictures are of the actual item being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license. Payment must be made within 4 days.
|
|
|
CAT40 5/8" END MILL TOOL HOLDER CNC tooling Co. 2-5/8" gage
Used. CAT40 5/8" END MILL TOOL HOLDER CNC tooling Co. 2-5/8" gage, in good working condition. please email any questions, thank you
|
|
|
CAT40 TG100 collet END MILL TOOL HOLDER CNC tooling Co. 2-5/8" gage
Used. CAT40 TG100 collet END MILL TOOL HOLDER CNC tooling Co. 2-5/8" gage, in good working condition. please email any questions, thank you
|
|
|
CAT40 3/8" END MILL TOOL HOLDER CNC tooling Co. 1-5/8" gage
Used. CAT40 3/8" END MILL TOOL HOLDER CNC tooling Co. 1-5/8" gage, in good working condition. please email any questions, thank you
|
|
|
LOT OF MACHINIST TOOLS COLLETS HUNTER DIE HOLDER FEELER GAGE LUFKIN TOOLING
HELLO AND WELCOME TO MY AUCTION. OVER THE NEXT FEW DAYS I WILL BE LISTING SOME GREAT TOOLS AND OTHER GREAT STUFF. SO PLEASE CHECK OUT MY OTHER AUCTIONS. THANKS! LOT OF MACHINIST TOOLS COLLETS HUNTER DIE HOLDER FEELER GAGE LUFKIN TOOLING PLEASE LOOK AT THE PICTURES AND FEEL FREE TO ASK ANY QUESTIONS. I WILL BE HAPPY TO TAKE ANYTHING BACK THAT IS NOT AS DESCRIBED. MY FEEDBACK IS VERY IMPORTANT SO PLEASE CONTACT ME WITH ANY PROBLEMS. I WILL NOT CHANGE CUSTOMS FORMS. SO PLEASE DO NOT ASK. I ALSO AM NOT RESPONSIBLE FOR ANY CUSTOMS FEES.
|
|
|
HARDINGE TOOLING T4-5/8 ADJUSTABLE KNEE TOOL HOLDER
The item you are bidding on is the one in the picture. Ask any questions prior to bidding. Screw missing as seen in photo. I purchased a machine shop so this is one of several auctions I will have for tooling.
|
|
|
DoAll 618 surface grinder machinist tools tooling holder grinding magnetic chuck
DoAll 6x18 surface grinder with a Walker LBP Electromagnetic chuck. The chuck has an Electro-Matic control that adjust to 0-100% It has a 1 1/2 HP. 3PH, 3450 rpm motor that can be wired for 230V/460V. It's now wired for 230V 3PH. The grinder also has dust covers all around the table to protect the ways. I will load for shipping with a forklift. The buyer will have to pay for shipping and make their own shipping arrangements. Take a look at my other items. Thank you.
|
|
|
Acme Gridley Tooling Holder Recces Holder 1 1/4" Angle Bed
This au ction is for(1) Acme Gridley Tooling Holder Recces Holder 1 1/4" Angle Bed Priced to sell Quick If you have any questions about your order or our products please feel free to contact us anytime! I will putting up Master Collet Pads. they will be for 1 1/4" machines. Be sure to add me to your favorites List! Please ask if you need lager quantities. Rest assured you will be taken care of from beginning to end. Our goal is to make each and every purchase the best experience possible!
|
|
|
Renishaw MP3 Probe Sender Tooling Shank Holder CAT-50 Taper 135912 sae 8620
DESCRIPTION GOOD USED WORKING CONDITION COMES WITH WHAT IS SHOWN IN THE PICTURES USE THE ZOOM FEATURE TO FURTHER INSPECT THE ITEMS IN THE PICTURES. WE STRIVE TO BE 5-STAR SELLERS. IF THERE ARE ANY PROBLEMS WITH YOUR ORDER PLEASE LET US KNOW IMMEDIATELY SO WE CAN MAKE THINGS RIGHT AND EARN YOUR 5-STAR FEEDBACK RATING. RETURN POLICY RETURNS ACCEPTED WITHIN 30 DAYS OF RECEIVING ITEM IF: The item(s) must be in its original condition. And also must be the same exact items with the same serial numbers as shipped to you. We use serial numbers and/or security markings to help prevent fraudulent returns. Any item(s) marked AS-IS. PARTS/REPAIR, or NO RETURN are not elgible for refunds. PAYMENT Payment expected within 7 days of purchasing item(s) Please try to make payment through paypal. If needed contact us for an alternative method SHIPPING Orders ... moreare usually shipped within 1 business day of cleared payment International customers feel free to contact us for a better shipping quote. Prices are not necessarily set Orders are usually shipped via USPS Our products come from various sources. We claim no affiliation with the manufacturers of our products. Safety and any other technical or general questions should be taken up with them. We are resellers of these items. And generaly not experts in the field these items pertain to. 050114mwB68 SHELF 2580 Powered by
|
|
|
Gromax Mazak Type H MK6/ER25 CNC Lathe Turret Live Tooling Collet Holder Chuck
For 18MS/250MS-12D Order# 5362100 Missing the nut. New List Price $2520.00 Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
(016) 1 1/4" Acme Gridley Tooling Holder Cutoff Cut Off Holder
This au ction is for(1) 1 1/4" Acme Gridley Cutoff Holder Priced to sell Quick If you have any questions about your order or our products please feel free to contact us anytime! I will putting up Master Collet Pads. they will be for 1 1/4" machines. Be sure to add me to your favorites List! Please ask if you need lager quantities. Rest assured you will be taken care of from beginning to end. Our goal is to make each and every purchase the best experience possible!
|
|
|
Lathe Quick Change Tool Post Tool Tooling Holder Machinist
You are bidding on a Quick Change Tool. It has a swivel base The tool post also rotates 360 degrees and is tightened by the top knob. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146a81b7070-0x112-
|
|
|
S-J Tool Holder 63164 Tooling MILLing CUTTERS MACHINIST TOOLS 1 1/4" Arbor
For sale is a S-J Tool Holder With arbor and 1 used horizontal cutter. 1 1/4" ID These have been sitting on a shelf for awhile and have been cleaned and are ready to work. They have the same dimensions as nmtb50 on the shank. The cutter is used but everything is loosened up and cleaned. Please feel free to ask any questions. We have many other lots available and will happily accept offers of multiple lots.
|
|
|
Cat 50 Tool Holder Erickson B-123667 CNC Machining Tooling
Erickson Cat 50 Tool Holder B-123667 Used in good condition. Paypal only. No Intl Shipments. No returns. Check out our other Manufacturing. Machining and Metalworking listings! Will combine shipments when possible. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-146a89284c4-0x113-
|
|
|
Cat 50 Tool Holder Erickson C-123676 CNC Machining Tooling
Erickson Cat 50 Tool Holder C-123676 Used in good condition. Paypal only. No Intl Shipments. No returns. Check out our other Manufacturing. Machining and Metalworking listings! Will combine shipments when possible.
|
|
|
Cat 50 Tool Holder Erickson C-123673 CNC Machining Tooling
Erickson Cat 50 Tool Holder C-123673 Used in good condition. Paypal only. No Intl Shipments. No returns. Check out our other Manufacturing. Machining and Metalworking listings! Will combine shipments when possible.
|
|
|
Cat 50 Shell Mill Tool Holder Erickson C-125103 CNC Machining Tooling
Erickson Cat 50 Tool Holder C-125103 Used in good condition. Paypal only. No Intl Shipments. No returns. Check out our other Manufacturing. Machining and Metalworking listings! Will combine shipments when possible. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-146a8928507-0x10c-
|
|
|
machinist tooling lathe fly cutting chuck holder
selling dads old tools
|
|
|
END MILL TOOL HOLDER CAT(C40-75EM1) (CNC MACHINING TOOLING) (PARLEC) 5
This auction is for a Parlec End Mill Tool Holder CAT. The End Mill are used in good condition. Parlec- C40-75EM1. Please contact us with any questions. 615.952.4814 Thanks for looking!
|
|
|
Beaver Horizontal Milling machine tooling Arbor style A - NO 27 NMTB50 holder
For sale is a Beaver Arbor Think this is a NMTB50 Style A No 27. 20 1/2" long roughly Has nut that has good threads. The entire shaft and arbor seem to be in good condition. It has been sitting on a shelf for awhile and has been wiped off and pictured. We will be listing many other arbors. Bushings, and horizontal cutters in the next few days. Please feel free to ask any questions.
|
|
|
CNC LATHE TOOL TOOLING HOLDER ISCAR DO-GRIP
CNC LATHE TOOL TOOLING HOLDER ISCAR DO-GRIP
|
|
|
Machinist boring bar 1.25" dia 19" long lathe mill tooling shank cutting holder
Machinist boring bar 1.25"diamter x 19" long lathe mill tooling shank cutting holder. Sold as pictured. If you are looking at this advertisement you are likely a machinist and know what you are looking at and what these are. Far better than I. I am not a machinist and will be taxed to speak intelligently to these items and all of the other machinist tools I am selling. I knowingly admit my lack of knowledge on machinist tools. After 15 years of these tools sitting in my garage or my shop un-touched and my not getting younger nor have I taken the steps I had hoped to in learning how to use all of these tools. I am finally going to let them go. When my father retired 20 years ago. He was a master Journeyman machinist for Stanford Linear Accelerator making either one-off special gizmos for the atom-splitting accelerator at Stanford ... moreas directed by the Mechanical Engineers or he was making tooling for larger volume items SLAC needed. Many of my fathers tools were either made in America or Japan. I very much appreciate your looking at this advertisement and ask if you are seriously interested. Please send genuine questions you may have. Please do not ask me to separate the tools in this auction out as I want to sell as one lot of similar tooling together. I will do my best to answer any questions sincerely and in the best timely means I can but I do have a weekday job that keeps me on the go. Shipping and packaging are the buyers responsibility. Please do not pay without contacting me about shipping first as the ebay shipping calculator is always wrong. I will calculate shipping on your zip-code and should you buy more than one of my classes of parts. I will do my best to ship items together to save buyer on shipping fees. Should you wish to pick-up tools locally, I will do my best to accommodate you within what my work schedule allows. I am selling many more of my fathers machinist tools in various other auctions as well as I them for sale locally. I will be listing items weekly so please do set me as a favo
|
|
|
1" drive Shell Face mill cutter 1-1/2" shank Tool Holder Adapter machine tooling
Item. Shell Milling machine ToolHolder adaptor Manufacturer. Unknown Arbor. 1" round with 3/8 drive lugs Shank size. 1-1/2 round straight x 2-3/8" long Condition. Good used Length of the 1" section is.713" Largest body outside diameter is 1.893" Overall Length is 5-1/2" The internal threads look to be about 1/2" right hand We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined ... moreshipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395
|
|
|
SANDVIK COROMANT QUICK CHANGE TOOLING TOOL HOLDER CNC LATHE LOT NO #1
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 DISCLAIMER: AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDELENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS THRU EBAY POLICIES ... moreBY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL. THANK YO 818 298 9685 EMAIL: WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION GUARANTEED TO WORK OR REFUND TO SEE OUR INVENTORY OF SANDVIK TOOLING PLEASE THE PART NO'S ARE: BT25-RCE-2085-16F BT25-TLSR-2545A-2G1M SHIPPING BY UPS IN THE 48 STATES INTERNATIONAL SHIPPING WILL BE $100 CALIFORNIA BUYERS TO PAY 9.75% SALES TAX SHIPPING& HANDLING: $60 SHIPPING BY UPS IN THE 48 CONTINENTAL STATES. PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 298-9685 or by e-mail. TERMS AND CONDITIONS: If payment is not received within 7 days.
|
|
|
FITZ-RITE ENDMILL HOLDER 50E-1.00-6, INGERSOLL 12N1B1280R01 CARBIDE TOOLING
FITZ-RITE ENDMILL HOLDER 50E-1.00-6 INGERSOLL CARBIDE TOOLING 12N1B1280R01 PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. AFTER SELLER AGREES TO SENDING THE ITEM BACK AND THE ITEM IS ... moreRECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 12 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities Be sure to add us to your favorites list and check out our other items. LSO/8873/SKID#377/ 1) E
|
|
|
CNC Tool Holder Made With Ingersoll Button Cutter 5W7K-40R01---Insert Tooling
Scroll down to see all the information on the item. We take many pictures of the labels. Condition, size, so that you know what you are getting and so that you can research more before you purchase. We respond to emails within 24 hours if you have a question. Bit not included. inkfrog terapeak. InkFrog Analytics.
|
|
|
INGERSOLL TOOL TOOLING INSERT HOLDER 10B-1269 DMP028135C5R10 3213480-1 NO INSERT
INGERSOLL TOOL TOOLING INSERT HOLDER 10B-1269 DMP028135C5R10 3213480-A PLEASE NOTICE THIS ITEM IS MISSING INSERT AND INSERT HOLDER ON ONE SIDE. SELLING ONLY WHAT IS PICTURED. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of ... morepurchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT
|
|
|
INGERSOLL TURNING TOOL TOOLING HOLDER 10B-1413 DAN271J5-02 3211077 10B1413
INGERSOLL TURNING TOO TOOLING HOLDER 10B-1413 DAN271J5-02 3211077 Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ... moreALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On lar
|
|
|
INGERSOLL TOOL TOOLING INSERT HOLDER 10B-1269 DMP028135C5R10 10B1269 3213480-A
INGERSOLL TOOLING INSERT HOLDER 10B-1269 DMP028135C5R10 3213480-A Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS ... moreWELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On larg
|
|
|
INGERSOLL TURNING TOOL TOOLING HOLDER 10B-1533 DAA035080C5R10 3216296 10B1533
INGERSOLL TURNING TOOL TOOLING HOLDER 10B-1533 DAA035080C5R10 3216296 PLEASE NOTICE THIS ITEM DOES NOT HAVE INSERT OR INSERT HOLDER. SELLING ONLY WHAT IS PICTURED. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase ... moreunless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept per
|
|
|
DA 100 ? TOOL HOLDER CNC MILL TOOLING MACHINE SHOP TOOLMAKER
HELLO YOU ARE PURCHASING THE PICTURED TOOL HOLDER. IT IS USED. THIS TOOL HOLDER IS NOT MARKED. IT DOES NOT HAVE A LABEL. I THINK IT IS FOR A DA 100 COLLET. THE INSIDE WHERE THE COLLET GOES IS ABOUT.896 INSIDE. PLEASE SEE PICTURES. PLEASE EMAIL ME ANY QUESTIONS YOU HAVE. THIS ITEM DOES NOT QUALIFY FOR MY FREE SHIPPING OFFER. CAN BE SHIPPED VIA PRIORITY MAIL FOR AN ADDITIONAL COST. CONTACT ME FOR A QUOTE. I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU! LL On Jun-25-14 at 13:42:59 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
PULL STUD RETENTION KNOB TOOL HOLDER TOOLING V FLANGE 5/8-11 MILLING CATERPILLAR
WE ARE SELLING A GOOD USED PULL STUD RETENTION KNOB TOOL HOLDER 45 DEGREE 5/8" 11 THREAD CATERPILLAR Check out my! Be sure to add me to your!
|
|
|
Misc Tooling Fixtures & Holder
This is used Misc Tooling Fixtures& Holder. Free shipping& returnable, I have 100% positive feedback. Please buy with confidence. Please study the photos and contact me with any questions. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-146f8a44ae9-0x110-
|
|
|
TELEDYNE FS CTFPR-163 CNC TURRET TOOL TOOLING TOOLCUTTER CUTTER HOLDER
You are bidding on a Teledyne FS CTFPR-163 CNC tool holder VERY CHEAP! Any questions contact me! Thank you!
|
|
|
OLD USED MACHINING TOOLS MACHINIST LATHE TOOLING HOLDER W/ CARBIDE
For sale- 6-3/4 inches in length- Carbide insert is 1/4 inch wide- Shaft is 1 inch x 7/8- Questions welcomed.
|
|
|
Armstrong Tool Holder No. 3-S Logan Lathe Tooling FREE Shipping
Used Armstrong tool holder w/cutter. No.3-S in excellent shape. Dimensions are 8" x 1-5/8" x 3/4" FREE shipping. I have one other tool holder listed, have a look. Thanks.
|
|
|
Broach Tooling Kit and Cutter Holder Diamond keyway Nice Condition
Broach Tooling Kit and Cutter Holder Diamond Dimensions of Ridges(Picture 4) Inches-3/8-C-1/4+C-5/16C Dimensions of Ridges(Picture 6) Inches-3/8SQ-3/16-B-1/8-B Dimensions of Attachments(Picture 8) in Inches-1-1/2-1-3/8-1-1/4-1-1/4-1-1/8-1-7/8-3/4-5/8-1/2 We are open 9am to 5.30 pm mon-friday. You can pay by credit card by calling 727-417-0172 JH. CR.
|
|
|
TAPER LATHE COLLET MILL HOLDER CHUCK TOOLING MILLING CUTTING TWDD-2A-518
TAPER LATHE COLLET MILL HOLDER CHUCK TOOLING MILLING CUTTING TWDD-2A-518
|
|
|
Vintage LEATHER Holder DESK ACCESSARY LETTER HOLDER RACK gold tooling trim
This is a NICE Vintage Leather Covered LETTER HOLDER It measures 4 1/8" by about 10 3/4" and is 6" tall. It has a monogram of"RTT" It is NOT new. Please expect to see wear to the front of the leather.PLEASE Look at the pictures. I have NOT Polished or used any scratch guard on this holder.I know some folks do not like the chemicals.it is AS I FOUND IT IT is VERY Usable! IT you enjoy the Patina of Vintage Desk Accessories.take a GOOD look at this one.It is NICE! IT is STRONG.not moving about when handled. IT has a felt base for a secure placement on ones desk top. It has no makers mark.but to me it looks"Italian" just my hunch) IT will be shipped in a 1 to 2 pound package. Thank you. 6-18
|
|
|
HORIZONTAL MILL ARBOR 1-50MM NMTB machine tooling holder BEAVER TOOL
For sale is a Milling Arbor 1-50MM 22.4Mm Thread Female 25mm Tool holder ID Think this is a NMTB50 Please feel free to ask any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1472d543920-0x101-
|
|
|
Beaver Style C No 12 & 50XC NO 16 SET OF 2 Tool Holder Milling Machine tooling
For sale is a Lot of 2 Tool Holders These have the same dimensions as the NMTB50 it seems. Both of these holders have been sitting for awhile and were cleaned. Both are in good usable condition but do not have hold down bolts. Beaver Style C No 12 Beaver 50C No 16 Please feel free to ask any questions.
|
|
|
LOT OF MISCELLANEOUS MACHINIST TOOLS KNURLING TOOLING HOLDER CENTER
Up for sale is a lot of misc machinist tools and tooling metal.These items are in good usable condition and may contain cosmetic rust and blemishes.They also will show signs of regular usage,scratches,knicks etc. 1 = large tooling holder. 1 = small tooling holder Champian with a wrench. 1 = Armstrong knurling tool This has been modified by previous owner(see pic) 1 = boring bar. 1 = small arbor 1 = homemade tooling holder. 1 = center. Large and small tooling Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like ... morewhat I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any di
|
|
|
Acme Gridley Tooling Holder Die Head 1 1/4" (1 1/2 Shank)
This au ction is for(1) Acme Gridley Die Head 1 1/4" 1 1/2 Shank) Priced to sell Quick If you have any questions about your order or our products please feel free to contact us anytime! I will putting up Master Collet Pads. they will be for 1 1/4" machines. Be sure to add me to your favorites List! Please ask if you need lager quantities. Rest assured you will be taken care of from beginning to end. Our goal is to make each and every purchase the best experience possible!
|
|
|
SANDVIK LF123H25 3225 BM PARTING GROOVING CUT OFF TOOL HOLDER CNC LATHE TOOLING
HELLO YOU ARE PURCHASING THE PICTURED SANDVIK TOOL. I HAVE LISTED THIS ASS USED BUT I THINK IT IS UNUSED. IT IS LABELED: SANDVIK COROMANT COROCUT LF123H25- 3225BM PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I SHIP(95% OR MORE) OF MY LISTINGS SAME DAY AS PAID IF PAID BY 3:00 P.M. EST. IF YOU MUST HAVE YOUR ITEMS SHIPPED SAME DAY PLEASE EMAIL OR CONTACT ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! GRAY On Jun-25-14 at 15:25:25 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
System 3R 3R-321.2 EDM Chuck, Electrode Holder. Tooling. 20mm Shank. Very Nice
Up for Sale is My System 3R 321 Manual Chuck I bought and no longer use anymore. It is in very good condition with little use. I have the T handle and the Flush port and an extra rebuild screw. I checked the Hydraulic fluid inside the unit and its perfect. Any Questions feel free to ask!
|
|
|
Suzuki Lathe Tool Holder, Machinest Tool, Gun Smith tooling
Suzuki Lathe Tool Holder 1/2" x 5/8" shank. Opening is about 3/8" head is about 1 1/8" x 1 1/2" square. Not an expert in lathe tools so please look at the pictures. Dave Ramsey said sale it all so that what I'm doing. If you have any questions please ask before you bid.
|
|
|
Beaver Tool Co. No 3 Boring Head Milling Machine tool holder tooling
For sale is a Beaver Boring Head Boring head no 3. 1 1/4" Round in middle.5" square tool holder. Roughly 3.5" wide. Holder is in good condition but sat on a shelf for awhile. It had a small amount of surface rust that has been soda blasted. Please feel free to ask any questions.
|
|
|
HORIZONTAL MILL ARBOR Taper Shank holde NMTB machine tooling holder Kearney
For sale is a Milling Arbor. Kearney& Trecker Morse taper adapter. Believe it is Morse#4 Markings- 59 B&S. Think this is a NMTB50 Please feel free to ask any questions.
|
|
|
Hardinge AHC-24 Second Op Chucker Lathe Tooling Holder
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is a Hardinge Lathe Tool Holder in Good Condition. Item Features& Specifications: Model# AHC-24. Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
|
|