Buy It Now
$11.60 Shipping Condition: New Location: Lenoir, United States Rudy does it all on a little Sherline lathe and mill. Plans and outline are included. 3 hours 40 minutes.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States See (P/N 50180 or P/N 67050), in place of the crosslide. Tool Holes: 1.5″ between centers. 10-32 x 7/8″ SHC Screw (3).
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States The lathe has 8” of space between centers. This lathe is a good choice for clockmakers, modelers, or those who will be working on small parts. 4000 Lathe. ... moreCNC Stepper Motor Mounts Installed.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. Sherline manufactures a slightly larger. 315″ adapter and drawbar set (P/N 1163). Sherline WW Collet Blank. (Refer also ... moreto the instruction manual on taper turning and boring.).
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. Sherline manufactures a slightly larger. 315″ adapter and drawbar set (P/N 1163). (Refer also to the instruction manual ... moreon taper turning and boring.). In most cases, however, collet adapters are accurate enough and do not require this truing operation.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States The high-speed steel tool is for use in higher hotter temperatures. As a result, it is a tool perfect for cutting without losing its hardness or temper. ... moreThe tools are made of high-speed tool steel (HSS).
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Sherline collets are numbered logically. For example, P/N 116004 is 4/64″ (1/32″). These collets are not hardened. Sherline manufactures a slightly larger. ... more315″ adapter and drawbar set (P/N 1163).
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. Sherline manufactures a slightly larger. 315″ adapter and drawbar set (P/N 1163). (Refer also to the instruction manual ... moreon taper turning and boring.). In most cases, however, collet adapters are accurate enough and do not require this truing operation.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. Sherline manufactures a slightly larger. 315″ adapter and drawbar set (P/N 1163). (Refer also to the instruction manual ... moreon taper turning and boring.). In most cases, however, collet adapters are accurate enough and do not require this truing operation.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States Sherline 8760- CNC 4 Axis Driver Box and Power Supply The components in this driver box are the same as the ones installed in the computer itself when ... moreordering a complete Sherline CNC system. Putting them in a separate box gives you the opportunity to set up a CNC system using a Sherline machine and Sherline stepper motors and drivers. But you can use your own computer and your choice of software to control them. The 8760 driver box has output cables for X- Y- Z- and A-axes. It also includes an input cable that connects to the 25-pin parallel(printer) port on your computer. Included with the driver package is a 4 amp power supply and a 2-CD set with the Linux OS and EMC 4-axis software ready to install on your computer if you choose. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1478ac352d7-0x112-
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. Sherline manufactures a slightly larger. 315″ adapter and drawbar set (P/N 1163). (Refer also to the instruction manual ... moreon taper turning and boring.). In most cases, however, collet adapters are accurate enough and do not require this truing operation.
Buy It Now
Free Shipping Condition: New Location: North Myrtle Beach, United States This sale is for one piece of Tantung G super cast alloy lathe tool bit blank in 7/16" or 11mm shank. This tool bit will not Anneal, Rust or become magnetic. ... moreTantung G can be used without cutting fluid.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. 2.1mm WW Collet for Sherline Lathes. Sherline collets are numbered logically. For example, P/N 116004 is 4/64″ (1/32″). ... moreIt does so with a great deal of centering accuracy.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Sherline milling collets are designed to be used with the Morse #1 internal spindle taper that is standard on both the Sherline lathe and vertical mill. ... moreThey are available in many sizes and shapes. These collets have a shallow angle that gives them high clamping pressure.
Buy It Now
$8.95 Shipping Condition: Used Location: Farmington, United States Sherline Motor Bracket 40020 And Encoder plus Pullies off a Spectralight CNC lathe. IM INCLUDING THE CIRCUIT BOARD NOW THAT WAS ATTACHED TO THE ENCODER! ... moreThis Item is Used! bore in large pulley is 9/16" encoder is untested .
Buy It Now
$27.00 Shipping Condition: New Location: Brooklyn, United States The reason for this is that because of the extra thickness of this crosslide, the center line of the lathe will not longer match.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. 4.7mm WW Collet for Sherline Lathes. Sherline collets are numbered logically. For example, P/N 116004 is 4/64″ (1/32″). ... moreIt does so with a great deal of centering accuracy.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. 2.7mm WW Collet for Sherline Lathes. Sherline collets are numbered logically. For example, P/N 116004 is 4/64″ (1/32″). ... moreIt does so with a great deal of centering accuracy.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States 8mm End Mill Holder for the Sherline Mill Spindle. The Sherline end mill holder will increase the versatility of your milling machine by enabling you ... moreto hold these popular cutters. These holders also make a good “quick-change” tool system.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States The round holes are for holding boring tools on center (tool not included) like Sherline’s own right- and left-hand 55° inserted tip tool holders. Considerations ... moreRegarding This Tool Holder and Its Possible End Uses.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States (ONLY HOLDER IS INCLUDED, tools not included, shown for reference only). Steel Dowel Pin 1/4″ x 3/4″ (2). Body Coating – Black Anodized.
Buy It Now
$4.87 Shipping Condition: Like New Location: Van Buren, United States THE HOME MACHINIST'S HANDBOOK DO IT YOURSELFER'S GUIDE PAPERBACK 1983 CLEAN BOOK WATCH FOR MUCH MORE TO BE LISTED SELLING AS IS[USED] SHIPPING: ... moreItem[s] will be shipped after payment is comfirmed. All shipping is via USPS.Unless otherwise noted in item description. COMBINED SHIPPING: We do combined shipping. Please let us know if you are bidding on mulitple items so we can delay invoicing. RETURN POLICY: Only if item was misrepresented! Must be in original packaging and shipped within 24 hours of delivery. BUYER pays return shipping costs and is responsible for carefully packing the item[s]~~ if it is returned broken.Buyer will be responsible for damages. Check out my
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Any existing Sherline lathe or mill can be converted to CNC-ready status. The installation will involve drilling and tapping several holes to attach the ... morestepper motor mounts. The kits include drill blocks that are attached to the appropriate table or bed using the single existing hole and then two new holes are drilled using the block as a guide.
Buy It Now
Free Shipping Condition: New Location: Santa Ana, United States
Buy It Now
$195.00 Shipping Condition: New Location: Vista, United States 1074 Steady Rest We are the first ever Sherline's online dealer (since 1996). 3020 5/32" Sherline Hex T-Driver. 3002 Cutoff Tool and Holder. 3060 3-pc. ... moreMill Collet Set w/ Drawbolt. 3079 3/8" End Mill Holder.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Made in the USA! Most full-size shop mills used by machinists are now available with a digital readout. They are also popular on lathes because they make ... moreyour life as a machinist much easier. Readouts on the X- crosslide) and Z-axes(leadscrew) can be reset to zero at any time with the push of a button. From there. As you move the handwheels, you can read the table movement to 3-1/2 decimal places(0005" on the digital readout. Metric versions read to.01mm. You no longer need to count handwheel revolutions or make difficult calculations when cranking in a negative number. As long as we were designing the electronics package. We went the extra step to include an RPM readout, adding an additional function to the package. The sensors are easy to install and require no modification of your Sherline lathe. If you use your lathe as a mill with the vertical milling column attachment. You can purchase a 3-axis DRO kit for the lathe(P/N 8210/8215) If you add a 2-axis DRO to your lathe now and later purchase a vertical milling column, you can purchase a kit to add the third DRO handwheel and sensor at that time(P/N 8240/45) New lathes can be ordered with the DRO already installed. See the LATHES section for details. As a cost-saving measure. Accommodation has also been made for owners of both a lathe and mill to use a single electronic display box for both machines. The input cables from the lathe can be unplugged and the readout box transferred from the lathe to the mill and vice versa. Depending on which machine you already have fitted with a DRO, ask for the upgrade for the other machine that allows you to use your existing box. See P/N 8220/8225 if you already have a mill with a DRO. See P/N 8210/8215 if you already have a lathe with a DRO. INSTRUCTIONS FOR USING THIS PRODUCT HTML version Note: All purchases made after 11:00 am Eastern time will be processed the following day.
Buy It Now
$6.20 Shipping Condition: Used Location: Ann Arbor, United States 3/16" Milling Collet for Sherline mill or lathe. - This suggestion should not cause anyone to go off the rails! I typically have quite a stack of sales ... moreto process. Emco Compact 10. Emco Compact 5 Unimill.
Buy It Now
Free Shipping Condition: New Location: Santa Ana, United States
Buy It Now
$4.63 Shipping Condition: Brand New Location: Flemington, United States He was a consummate machinist and a superb teacher. You will learn much from his approaches. Rudy does it all on a little Sherline lathe and mill.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States – Standard 10″ XYZ base from model 5500/5510 mill with adjustable “zero” handwheels. Part numbers and travels of these available XYZ bases are as. compared ... moreto the cost of a vertical milling column and XY base.
Buy It Now
Free Shipping Condition: New Location: Irvine, United States 1010- 5/32" Drill Chuck with#1 Morse Arbor Sherline's drill chucks are available in 5/32" 1/4" and 3/8" sizes. Runout is.003" ... moreor less. If runout of less than this amount is required, collets should be used to hole the drill rather than a chuck. The 5/32" chuck holds drills from 5/32" 4mm) down to#80(0135" or.343mm) We have pressed a special arbor that provides either a#1 Morse taper to fit into the Sherline headstock(P/N 1010) or a#0 Morse taper to fit the tailstock(See P/N 1015) A chuck key plus a drawbolt and washer are included with P/N 1010 to secure the chuck in position. These chucks are useful for holding very small drills and their shorter length provides an increase of about 1/2" in working space between centers compared to the 1/4" drill chuck.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States Sherline 4400A- CNC Ready 17" Lathe Package The 4400A deluxe longbed lathe can be ordered with a 3-jaw chuck and 3/8" drill chuck. These are ... morethe most often-used accessories on a lathe. And buying them as a money-saving package essentially means the drill chuck is free. NOTE: CNC-ready machines cannot be operated manually until stepper motors are installed. Stepper motors are sold separately and NOT included in this package This package is CNC-ready and includes the"A" accessory package. The"A" accessories include: 3.1" 3-jaw Chuck 3/8" Tailstock Chuck*Pictures are for REFERENCE ONLY. Please refer to written descriptions to see what exactly comes with each lathe. PLEASE NOTE CNC READY MACHINES DO NOT INCLUDE COMPUTER. STEPPER MOTORS OR CONTROLLER. THEY CAN BE PURCHASED SEPARATELY FROM ONE OF OUR OTHER AUCTIONS*
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Sherline 30260- 2 Center Drill. 078 tip dia. 3/16" shank dia.
Buy It Now
$19.95 Shipping Condition: New Location: Brooklyn, United States On the crosslide. If you already have a DRO lathe then this is the vertical milling column for you. This DRO Column features the handwheel, encoder, sensor, ... moreand connector and will connect to your digital readout box (not included).
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Older lathes that have the 4″ table will not be wide enough. All other parts transfer from your old table. Changing tables is very easy. Believe it or ... morenot, a technician with a need to cut an accurate radius to make prosthetic eyeballs got us started on putting this tool into production.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States 10mm End Mill Holder for the Sherline Mill Spindle. The Sherline end mill holder will increase the versatility of your milling machine by enabling you ... moreto hold these popular cutters. These holders also make a good “quick-change” tool system.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States 3020 5/32″ Sherline Hex T-Driver. The main difference between a lathe and a mill is that on a lathe, the work turns and the cutting tool is stationary, ... morewhile on a mill, the tool turns and the work is stationary.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States About the Sherline CNC-Ready Conversion Kits. Any existing Sherline lathe or mill can be converted to CNC-ready status. The installation will involve ... moredrilling and tapping several holes to attach the stepper motor mounts.
Buy It Now
$145.95 Shipping Condition: New Location: Vista, United States 3020 5/32" Sherline Hex T-Driver. 3002 Cutoff Tool and Holder. 3060 3-pc. Mill Collet Set w/ Drawbolt. 3079 3/8" End Mill Holder. 7401 6-pc. 3/8" Shank ... moreEnd Mill Set. Mill Specifications.
Buy It Now
$145.95 Shipping Condition: New Location: Vista, United States 3020 5/32" Sherline Hex T-Driver. 3002 Cutoff Tool and Holder. 3060 3-pc. Mill Collet Set w/ Drawbolt. 3079 3/8" End Mill Holder. 7401 6-pc. 3/8" Shank ... moreEnd Mill Set. Mill Specifications.
Buy It Now
Free Shipping Condition: New Location: Santa Ana, United States The adapter causes the jaws of the collet to close down, gripping the part to be machined.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Sherline milling collets are designed to be used with the Morse #1 internal spindle taper that is standard on both the Sherline lathe and vertical mill. ... moreThey are available in many sizes and shapes. These collets have a shallow angle that gives them high clamping pressure.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States About the Sherline CNC Ready Conversion Kits. Any existing Sherline lathe or mill can be converted to CNC-ready status. The installation will involve ... moredrilling and tapping several holes to attach the stepper motor mounts.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States The lathe has 8” of space between centers. This lathe is a good choice for clockmakers, modelers, or those who will be working on small parts. 4000 Lathe. ... moreStandard 1-5/8″ (41mm) laser engraved aluminum handwheels.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States The lathe has 8” of space between centers. This lathe is a good choice for clockmakers, modelers, or those who will be working on small parts. CNC Stepper ... moreMotor Mounts Installed. 3007 3-pc 1/4″ HSS Cutting Tool Set (LH, RH, Boring).
Buy It Now
$11.95 Shipping Condition: New Location: Exeter, United States Our micro lathe base option will also fit Sherline, Cue Smith, Chlisby or Micro Lathe II Taig lathe or similar beds. We carry a full line of accessories ... morefor pool cue care.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States Made in the USA! Made In The USA! YOU SAVE $65.00 over the price of these items purchased individually. The 4000B/4100B lathe can be ordered with a selection ... moreof popular accessories. Included are a 3-jaw and drill chuck plus a selection of the most often asked for accessories to outfit your shop. This package includes a DRO and the"A" and"B" accessory packages. The"A" accessories include: 2.5" 3-jaw Chuck, 1/4" Tailstock Chuck, The"B" accessories include: 1074 Steady rest, 1191 Live Center, 3002 Cutoff Tool and Holder, 3007 3-pc 1/4" HSS Cutting Tool Set(LH. RH, Boring) 3020 5/32" T-driver, 3021 3-pc Center Drill Set, 5327 Sherline Accessories Shop Guide Book, ScaleAutoArt is a Sherline approved dealer. Shipping is direct from Sherline and usually ships UPS Ground Service w/in 48 hours after receiving payment. Note: All purchases made after 11:00 am Eastern time will be processed the following day.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States About the Standard 1⅝” Handwheel. Handwheel graduations When upgrading handwheels, consider also the adjustable “zero” handwheels. They can be used on ... moreeither a lathe or a mill.
Buy It Now
$198.95 Shipping Condition: New Location: Vista, United States Sherline SKU #2210 W. R. Smith T-Rest. Sherline SKU #1161 WW & 8mm Collet Adapter and Drawbar (To use only for WW 0.312 - 0.313). 5/32″ Sherline Hex T-Driver. ... moreIn addition to the lathe and mill, you get the following accessories.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Sherline milling collets are designed to be used with the Morse #1 internal spindle taper that is standard on both the Sherline lathe and vertical mill. ... moreBecause of the shallow angle of the Morse #1 taper, when the drawbolt is tightened, greater clamping force can be applied when compared to the clamping pressure of WW collets.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Like those used on many of our large production machines, the mill tooling plate solves two main problems. The best way to hold a part more securely is ... moreto add more clamping points rather than over-tightening the points you already have.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. Be sure to check WW collets made by other manufacturers. Sherline manufactures a slightly larger. 315″ adapter and drawbar ... moreset (P/N 1163). It will draw the collet up into the tapered adapter.
Buy It Now
$85.00 Shipping Condition: New Location: Vista, United States Each handwheel has laser engraved aluminum handwheel collars. Handwheel Graduations.001″ (.01 mm). 4000 lathe with two stepper motors fitted to stepper ... moremotor mounts on the leadscrew and crosslide axes.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States Here’s what you do Plug the 25-pin parallel cable (included) from the driver box to the printer port of your computer. Attach the stepper motors to the ... morestepper motor mounts on the crosslide. Attach to the leadscrew of your Sherline CNC-ready lathe and plug the X and Z cables from the driver box to the stepper motors.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States These collets are not hardened. Sherline collets are numbered logically. For example, P/N 116004 is 4/64″ (1/32″). It does so with a great deal of centering ... moreaccuracy. It then threads into the back side of the collet.
Buy It Now
$19.01 Shipping Condition: Used Location: Canada LOTS OF AUCTIONS ONLINE NOW! Brand Sherline Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear ... moreon ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States Sherline 4400C- 17" Lathe Package The 4400C deluxe longbed lathe can be ordered with a selection popular accessories. Included are a 3-jaw and drill ... morechuck plus a selection of the most often asked for accessories to outfit your shop. NOTE: CNC-ready machines can not be run manually until stepper motors are installed. Stepper motors are NOT included. They can be purchased separately. This package includes the"A" B" and"C" accessory packages. The"A" accessories include: 3.1" 3-jaw Chuck 3/8" Tailstock Chuck The"B" accessories include: 1074 Steady rest 1191 Live Center 3002 Cutoff Tool and Holder 3007 3-pc 1/4" HSS Cutting Tool Set(LH. RH, Boring) 3020 5/32" T-driver 3021 3-pc Center Drill Set 5327 Sherline Accessories Shop Guide Book The"C" accessories include: 1270(1280 metric) Compound Slide 3100 Thread Cutting Attachment*Pictures are for REFERENCE ONLY. Please refer to written descriptions to see what exactly comes with each lathe.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States The lathe has 8” of space between centers. This lathe is a good choice for clockmakers, modelers, or those who will be working on small parts. Pulleys, ... moredrive belt, faceplate, lathe dog. Sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manual.
Buy It Now
$4.75 Shipping Condition: New Location: Brooklyn, United States Adapter Base for Lathe Column Upgrade. Adapter Base, Lathe to 8-way Column.
Buy It Now
$35.00 Shipping Condition: New Location: Brooklyn, United States Industrial CNC Chucker Lathe. NOTE: collets are not available through Sherline Products. Current 2 A. Rotor inertia 480 g-cm2. Radial-Force Fr=75 N Max., ... moreor 16.86 lbf Max. Axial-Force Fa=15 N Max., or 3.37 lbf Max.
|