|
Delta Milwaukee Rockwell Lathe 24" Tool Rest Duel 1" Post 1460 DDL 57 Cat 694
Delta Rockwell 24" Duel post Tool Rest. It has a few nicks as shown in the pics but those could easily be sanded out. Two 1" Posts. FREE SHIPPING TO THE LOWER 48 STATES! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147a53b3f3c-0x116-
|
|
|
10" x 24"cc DELTA ROCKWELL Engine Lathe
Preowned 10" x 24"cc DELTA ROCKWELL Engine Lathe. Model: 25-700, S/N: 1343931 Swing over bed and saddle wings Swing over cross slide Bed length Bed width Distance between centers Cross slide travel Compound travel Capacity through spindle Spindle nose. Threaded Headstock and tailstock. Size of center taper Tailstock spindle travel(54) Feed changes. Longitudinal cross(54) Threads Spindle speeds. Direct drive, infinitely variable back gear. Infinitely variable 10-1/8" 6" 44-3/8" 6-7/16" 24" 6" 2" 1-1/16" 1-1/2"8#2 Morse 2-1/2" 0014-0810 I.P.R. 0007-0413 I.P.R. 4-224 T.P.I. 250-1.500 R.P.M. 50-300 R.P.M. Equipped With 6" Diameter dog plate 5" Diameter ROCKWELL three-jaw chuck 3" Diameter capacity three-point plain-type steady rest Model 50 JACOBS collet chuck with(10) ... moreassorted size JACOBS 500 Series collets Threading dial Tailstock with(1) 0-1/2" capacity JACOBS key-type drill chuck Cabinet base 3/4 H.P. 3/60/220-440 volt drive motor with Forward/Neutral/Reverse electrical control switch Machine is wired for 220 volt operation. Approximate Weight: 564 Lbs. Approximate Dimensions: 54" L-R x 26" F-B x 46" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
DELTA MILWAUKEE ROCKWELL 12" WOOD LATHE TOOL REST BASE ASSEMBLY
DESCRIPTION: USED. TOOL REST BASE ASSEMBLY FOR THE DELTA ROCKWELL 12" WOOD LATHES. IT USES 1" DIAMETER TOOL RESTS. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. ... moreI DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE.
|
|
|
DELTA MILWAUKEE ROCKWELL 12" WOOD LATHE TAILSTOCK ASSEMBLY
DESCRIPTION: USED. DELTA MILWAUKEE ROCKWELL 12" LATHE TAILSTOCK. NO CRACKS OR REPAIRS. THE TAPER IS NO.2MT. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE ... moreMAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKE
|
|
|
Delta Rockwell Wood Lathe Gap Filler Block
Up for bid is a Delta 46-440 gap filler block. These are for the Delta heavy duty wood lathes that have the 4 threaded holes at the bed gap at the headstock. These are used for metal spinning. Thin face plate turnings, or anything else done right near the inboard spindle. It also can be used for a bench mounted bed extension beyond the tailstock. No cracks, breaks or repairs, just a shallow drill hole started. Figure $12.75 for shipping in the continental U.S.
|
|
|
Metal lathe taper attachment Southbend Rockwell craftsman brown sharpe morse
This does not have a manufacturer on but it looks to be in great shape. Lots of oil and no rust, I'm not sure what this may fit, if you need some measurements let me know. 45 lbs.
|
|
|
L00 taper Spindle Nose Protector cover Lathe Rockwell
I sold the lathe that this went on so don't need it anymore. This item protects the taper and keyway if your doing between centers work or collet closer work. Not sure the manufacturer of this particular one. Has tapped holed in front. Maybe its an old chuck mounting plate that has been turned down. Either way what you see is what you get. Threads and taper are in good condition. Please ask any and all questions before you bid. I want a good transaction with positive feedback when we are done. Thanks for looking and good luck.
|
|
|
Rockwell Delta 46-400 WOOD LATHE 12 X 36, VS 1 HP 3 PHASE +LOTS OF ACCESSORIES++
ROCKWELL 46-400? WOOD LATHE(VARIABLE SPEED) POWERED BY 1 HORSEPOWER. 3 PHASE ELECTRIC MOTOR THIS LATHE IS USED. BUT STILL IN GOOD WORKING CONDITION. CAME OUT OF A WORKING SHOP. INCLUDES A TON OF ACCESSORIES IN GOO D CONDITION. HAS SHIELD AND A DUST COLLECTOR PORT IN THE BACK. ALSO HAS KNIFE RACK MOUNTED TO THE FRONT OF THE BED. I WIRED IT UP IN MY SHOP. SO FEEL FREE TO COME BY AND TEST IT OUT. CORD AND PLUG ARE NOT INCLUDED. LET ME KNOW IF YOU HAVE ANY QUESTIONS. INCLUDES: 16 KNIVES 4 TOOL RESTS(INCLUDING A 24" STEADY REST CENTERS AND DRILL CHUCK 8 FACE PLATES(2 OF EACH: 8" 6" 4" 3" I ALSO HAVE(OR HAD) A 20" POWERMATIC BAND SAW AND A DELTA UNISAW(BOTH 3 PHASE ALSO) I ALSO HAVE A LOT MORE LATHE ACCESSORIES. THIS ITEM WILL HAVE TO BE CRATED AND FREIGHTED. IT WEIGHS ABOUT 500 POUNDS. I WORK WITH FREIGHTQUOTE AND ... moreCAN GET YOU A QUOTE IF YOU SEND ME YOUR ZIP CODE. CAN DO LOCAL PICK-UP ALSO. I WILL LOAD FOR FREE. I WILL COMBINE SHIPPING IF YOU BUY MULTIPLE ITEMS. I WILL COMBINE SHIPPING. IF YOU BUY MORE THAN ONE ITEM. WAIT FOR AN INVOICE BEFORE PAYING PLEASE CHECK OUT MY OTHER ITEMS. THANKS FOR LOOKING. IF YOU WISH TO PAY WITH SOME FORM OTHER THAN PAYPAL. PLEASE CONTACT ME FIRST.
|
|
|
Rockwell Delta 6" TOOL REST WOOD TURNING, LATHE ACCESSORY 434-03-089-5006, +JET+
DELTA/ ROCKWELL 6" TOOL REST GOOD USED. HEAVY DUTY TOOL REST FOR YOUR WOOD LATHE. 1" DIAMETER. 6" LONG, SHOULD FIT MOST WOOD LATHES. I HAVE(OR HAD) MANY OTHER SIZES(8" 6" 4" 3" OF FACEPLATES AND A 3 PHASE ROCKWELL LATHE WITH A TON OF ACCESSORIES. I ALSO HAVE A DELTA UNISAW AND A 20" POWERMATIC BANDSAW(ALL 3 PHASE) PLEASE CHECK OUT MY STORE. I WILL COMBINE SHIPPING ON MULTIPLE ITEMS.
|
|
|
Rockwell Delta 3" FACEPLATE WOOD TURNING 1-8 THREADS LATHE ACCESSORY JET
DELTA/ ROCKWELL? 3" FACEPLATE GOOD USED. HEAVY DUTY FACEPLATE FOR YOUR WOOD LATHE. 1" DIAMETER. 8 THREADS PER INCH(TPI) SHOULD FIT MOST WOOD LATHES. I HAVE(OR HAD) MANY OTHER SIZES(8" 6" 4" 3" OF FACEPLATES AND A 3 PHASE ROCKWELL LATHE WITH A TON OF ACCESSORIES. I ALSO HAVE A DELTA UNISAW AND A 20" POWERMATIC BANDSAW(ALL 3 PHASE) PLEASE CHECK OUT MY STORE. I WILL COMBINE SHIPPING ON MULTIPLE ITEMS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-147b0f62662-0x117-
|
|
|
Rockwell Delta 4" FACEPLATE WOOD TURNING 1-8 THREADS LATHE ACCESSORY JET
DELTA/ ROCKWELL? 4" FACEPLATE GOOD USED. HEAVY DUTY FACEPLATE FOR YOUR WOOD LATHE. 1" DIAMETER. 8 THREADS PER INCH(TPI) SHOULD FIT MOST WOOD LATHES. I HAVE(OR HAD) MANY OTHER SIZES(8" 6" 4" 3" OF FACEPLATES AND A 3 PHASE ROCKWELL LATHE WITH A TON OF ACCESSORIES. I ALSO HAVE A DELTA UNISAW AND A 20" POWERMATIC BANDSAW(ALL 3 PHASE) PLEASE CHECK OUT MY STORE. I WILL COMBINE SHIPPING ON MULTIPLE ITEMS.
|
|
|
Rockwell Delta 6" FACEPLATE WOOD TURNING 1-8 THREADS LATHE ACCESSORY JET
DELTA/ ROCKWELL? 6" FACEPLATE GOOD USED. HEAVY DUTY FACEPLATE FOR YOUR WOOD LATHE. 1" DIAMETER. 8 THREADS PER INCH(TPI) SHOULD FIT MOST WOOD LATHES. I HAVE(OR HAD) MANY OTHER SIZES(8" 6" 4" 3" OF FACEPLATES AND A 3 PHASE ROCKWELL LATHE WITH A TON OF ACCESSORIES. I ALSO HAVE A DELTA UNISAW AND A 20" POWERMATIC BANDSAW(ALL 3 PHASE) PLEASE CHECK OUT MY STORE. I WILL COMBINE SHIPPING ON MULTIPLE ITEMS.
|
|
|
Delta Rockwell Lathe Headstock Adapter For Buffing Polishing Wheel Threaded
This was an accessory I had for my 1460 delta rockwell lathe 1460 12" lathe. Fits standard polishing wheels and bench grinder wheels On Aug-06-14 at 22:43:06 PDT. Seller added the following information: 1" RH thread 8 tpi 1/2 course adapter
|
|
|
Delta Rockwell Wood Lathe Headstock Cover CBL-404
Used headstock cover from a vintage Delta Rockwell 12" wood lathe. Casting# CBL-404 Good condition. See pics for details. Includes what is in the pics. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-147b3977fb0-0x109-
|
|
|
Delta Rockwell Milwaukee Vintage Switch Rod & Guide Drill Press Lathe Jointer
VINTAGE DELTA ROCKWELL MILWAUKEE SWITCH ROD AND GUIDE FOR DELTA ROCKWELL MILWAUKEE EQUIPMENT. OVER ALL LENGTH IS APPOX. 18" FREE SHIPPING TO 50 STATES!
|
|
|
Vintage Delta Rockwell Milwaukee wood lathe jackshaft assembly jack shaft pulley
This auction is for a Delta Rockwell Milwaukee wood lathe jackshaft assembly as shown below. Excellent condition. Everything works well and runs nice and true. You can change the height of each stand independently. Changes your lathe from 4 speeds to 15 speeds. FREE SHIPPING TO ALL 50 STATES!
|
|
|
Nice Rockwell Spearpoint Wood Lathe Turning Chisel USA
This auction is for a Rockwell spearpoint wood lathe turning tool. Very good condition with very sharp edge. Steel blade is 7" long and 1/2" wide. Maple hardwoosd handle is 10" long.
|
|
|
DELTA ROCKWELL 11/14 WOOD LATHE HEADSTOCK 1-8 SPINDLE 46-111
DESCRIPTION: USED. HEADSTOCK FOR THE 46-111 WOOD LATHE. THE BEARINGS ARE IN GREAT CONDITION. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE ... moreMAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WAL
|
|
|
DELTA ROCKWELL 11/14 WOOD LATHE TAILSTOCK ASSEMBLY 46-111 W/ WRENCH
DESCRIPTION: USED. TAILSTOCK FOR THE 46-111 WOOD LATHE. NO 2 MT RAM. THE HANDHWEEL WOBBLES A LITTLE, BUT IT DOES NOT CAUSE A PROBLEM. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND ... moreLABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTE
|
|
|
ROCKWELL DELTA 14/11 WOOD LATHE-#46-111 SERIES-MADE IN THE USA
HELLO AND WELCOME TO MY AUCTION UP FOR AUCTION IS A ROCKWELL/DELTA 46-111 WOOD LATHE"THE ROCKWELL WOOD LATHE IS A RUGGEDLY DESIGNED MACHINE FOR TURNING WOOD. PLASTICS AND NON-FERROUS METALS SUCH AS ALUMINUM, BRASS AND COPPER. IT HAS UNMATCHED VERSATILITY FOR EXTRA JOBS SUCH AS SANDING, BUFFING, POLISHING AND DRILLING. THE LATHE WAS MADE IN THE USA IN THE 1970'S A COPY OF THE OWNER'S MANUEL AND PARTS LIST THE LATHE APPEARS TO HAVE BEEN USED VERY LITTLE AND IS EXTREMELY CLEAN 4 SPEEDS WITH 2 STEPPED PULLEYS SPINDLE 1' X 8tpi#2 MOORSE TAPPER IN HEAD AND TAIL STOCKS SPINDLE SPEEDS 990. 1475, 2220 AND 3250 RPM'S 1/3 H.P. HEAVY DUTY. BALL BEARINGS, 1725 RPM ROCKWELL MOTOR WITH CAPACITOR START 14" SWING IN THE'GAP' AND 11' OVER THE MAIN BED OUTBOARD TURNING SET-UP INDEXING MECHANISMS ON HEADSTOCK PULLEY AND ... moreHEADSTOCK COMES WITH: 12' OFF-SET TOOL REST AND TOOL REST BASE; 3' AND 6' FACE PLATES; BALL BEARINGS CENTER; GEARED CRAFTSMAN'S 1/2" CHUCK. STEEL ROCKWELL STAND THIS IS A FREE LOCAL PICK-UP ONLY. PLEASE BRING A HELPER AS I CANNOT HELP YOU LIFT THE LATHE THANK YOU FOR VIEWING MY AUCTION. GOOD LUCK AND HAVE FUN BIDDING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147c361c124-0x118-
|
|
|
Vintage Industrial Cast Iron Table Legs Cat.945 Delta Rockwell Wood Lathe
Up for sale is this pair of vintage cast iron table legs Cat 945 DDL 187 for a wood lathe. These have been in a workshop for years and were repainted green at some point. They're in nice condition. Except for the feet which are heavily rusted. They are About 30" tall The base is 19 5/8" wide. The center to center of bottom holes is 17 1/2" The Top is about 8 3/4" wide and 5" deep. Looking at the top as a"U" the top holes are 6" center to center-the bottom 5 1/4" Due to their weight I will build a wooden box for shipping and will take up to 3 days. Shipping will cost $100 but I will refund any difference in cost. Local pick up is welcomed. Please contact me with any questions!
|
|
|
Delta / Rockwell Metal Lathe 3 phase Model # 25-700 Variable Speed from a School
Rockwell variable speed metal lathe 3 phase from a school where it doesn't look like it was used very much. The one gear has three chipped teeth that you can see in the picture but they are not next to one another. This is for pick up only no shipping. Thanks for looking and please check my other auctions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147cb8bee1c-0x10c-
|
|
|
ROCKWELL 46-111 WOOD LATHE WITH ACCESSORIES AND STAND VINTAGE UPGRADED MOTOR
Late 60s- mid 70s vintage Delta/Rockwell Model# 46-111 lathe. 3/4hp& 120volt craftsman motor with step pulleys for 4 speeds. Has the original rockwell stand. 8 turning chisels. 5 are Vermont american,3 unknown make) several face plates, 1" x 8tpi spindle, several tool rests, dead center tailstock and some other odds and ends. The lathe looks to be in very good shape. Also known as a 44/11, indicating around an 11" swing and 44" between centers. The lathe new was about $400 in the early 70’s. Manual available. I believe it is 11" swing between centers, with a 3" x 14" gap at the spindle to swing 14" for bowl turning.Works as it should.Local pick-up only.Also for sale locally.Feel free to ask questions.Thanks for looking
|
|
|
Delta Rockwell 12" Wood Lathe Headstock CBL-401
Used headstock from a vintage Delta 12" wood lathe. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Rockwell 46010 10" Lathe
This auction is for a Rockwell 46010 10" Lathe. The motor works and the frame is straight and the bed. Handwheel, headstock and tailstock are in good condition. The motor is a Craftsman model 113.12003 and is 1/2 horsepower and 3450 rpm. This lathe needs a mounting bracket for the bed, a v-belt and the table top. The frame measures 38" long, 15" wide and 40" tall. The bed rails measure 49" long. The pictures show the tailstock cover off(so you can see inside) but will easily screw back on. Free shipping is for within the continental US only. On Nov-07-13 at 19:01:23 PST. Seller added the following information:
|
|
|
ROCKWELL DELTA METAL BENCHTOP SHOP MACHINIST LATHE
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. ROCKWELL DELTA METAL BENCHTOP SHOP MACHINIST ... moreLATHE DESCRIPTION: ~ Up for sale is a good working Rockwell Delta benchtop machinist lathe. The motor is 115V/230V powered. The freight shipping weight is 425lbs(weight includes pallet) on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction Site Convention Center or Tradeshow Residence Terminal The quote is a"rough estimate" for freight shipping. It takes a moment for the calculator to load a quote. The carrier that is presented in the quote may not necessarily be the one used at the time of shipment. gsrx_vers_566(GS 6.7.1(566)
|
|
|
Heavy 12" Wide Tool Rest #DDL12 from Delta Rockwell 11" Wood Lathe #46-111
This is a nice Heavy used 12" wide Tool Rest DDL 12 from a Vintage 11" Delta Rockwell wood lathe made in the USA Has some nicks and dings wear and tear dust and dirt but in good working condition The post or stem is 1" diameter about 2 1/8" long overall about 4 1/4" from end of post to work edge. Local Pick-up Available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. I Make Every effort to package each item and safe and secure as possible* I insure most items depending on method of shipment and fragility of the item. The USPS will occasionally damage or lose an item or.Break a box open and lose all or part of the contents.USPS requires that a buyer complete a damage report and bring the item to their local Post Office. It is faster to file a claim ... morelocally but if you prefer I can file it on-line if you send me pictures of the damaged box and items. i will file the claim when approved you can return the item and I will refund your money# Do NOT throw out the original box packing and contents! 14-010 815
|
|
|
Delta Rockwell Milwaukee 1460 or 46-111 Lathe spindle pulley P/N DDL-121
Here's a used Delta Rockwell Milwaukee 1460 or 46-111 Lathe spindle pulley for your consideration. Yes. They both use the same pulley. It's used but it's fairly clean and in very good mechanical condition. Just in case you're unclear which Delta lathe is the 1460. To see some pictures of it. This pulley will also work on several other models. Thanks for looking!
|
|
|
old Delta / Rockwell wood lathe cast iron legs DDL 187 or cat 946
decent used condition with scratches. Some rust showing. The area where the top shelf mounts is aprox. 5 x 8-1/2" The legs are right at 30" tall, and spread out to about 19" This package will be 70 lbs or more. Shipping is per ebay calculator per weight. I do not add any for handling. Packaging nor any other reason. Ships to United States only. 8-13-17. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-147e64b4535-0x109-
|
|
|
Vintage Delta Milwaukee Rockwell Jack Shaft 1460 Wood Lathe
This auction is for a great working Delta Milwaukee Rockwell Jack Shaft for 1460 12" wood lathe and will also work on the 11" wood lathes as well. Check the pictures and ask any questions before bidding Thanks and good luck. I will disassemble shaft and pack in a large USPS flat rate box for shipping
|
|
|
Heavy Tailstock Assembly -Rockwell Delta Homecraft 11" Wood Lathe 1 1/4" Bed Gap
This is a used Heavy Tailstock assembly from a 11" Rockwell Delta Wood Lathe Homecraft Model Made in Pittsburgh PA USA. Bed has a 1 1/4" gap between rails Some wear and tear rust and dust and dirt but in very good condition. Turns freely It takes# 2 Morse Taper centers and is 5 1/2" from center to top of bed Local Pick-up Available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. I may somewhat disassemble this item for safe and economical shipping. Please check all packaging before discarding. I Make Every effort to package each item and safe and secure as possible* I insure most items depending on method of shipment and fragility of the item. The USPS will occasionally damage or lose an item or.Break a box open and lose all or part of the contents.USPS ... morerequires that a buyer complete a damage report and bring the item to their local Post Office. It is faster to file a claim locally but if you prefer I can file it on-line if you send me pictures of the damaged box and items. i will file the claim when approved you can return the item and I will refund your money# Do NOT throw out the original box packing and contents! 14-040 819
|
|
|
Delta Rockwell 1/2 HP Dual Voltage 115/230 Electric Motor #62-227 wood lathe
This auction is for the used motor with built in on/off switch and Mounting bracket as pictured from a Delta Rockwell Wood Lathe Some dust and dirt wear and tear and rust but In good working shape. 1725 RPM Capacitor Start. 5/8" diameter shaft with key slot about 1 3/4" long, 115& 230 Dual Voltage 60 HZ single phase reversible currently wired clockwise(right handed) at shaft end. Use for wood or metal lathes etc. Will be shipped in a large USPS flat rate box. Local Pick-up Available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. I Make Every effort to package each item and safe and secure as possible* I insure most items depending on method of shipment and fragility of the item. The USPS will occasionally damage or lose an item or.Break a box open and lose ... moreall or part of the contents.USPS requires that a buyer complete a damage report and bring the item to their local Post Office. It is faster to file a claim locally but if you prefer I can file it on-line if you send me pictures of the damaged box and items. i will file the claim when approved you can return the item and I will refund your money# Do NOT throw out the original box packing and contents! 14-036 819
|
|
|
Delta Rockwell Wood Lathe Faceplate / 8.5" Sanding Disc
Used 3" face plate/ 8.5" sanding disc from a vintage Delta wood lathe. 1" x 8 tpi threads. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Steel Lathe Large Curved Bowl Tool Rest Woodturning Wood Turning Delta Rockwell
8" Wood Lathe Curved Large Bowl Rest In very good condition. 1" tool Post. FREE SHIPPING TO ALL 50 STATES!
|
|
|
Craftsman Wood Lathe 8" Tool Rest 3/4 Post Delta Milwaukee Rockwell Etc
This auction is for a 8" tool rest with a 3/4" post for the banjo will fit any Craftsman Walker turner Atlas Delta Milwaukee Rockwell Wood Lathe With 3/4" Banjos. Check the pictures and ask any questions before bidding.
|
|
|
DELTA Double Duty ROCKWELL Lathe Scroll Bandsaw 1/3 HP Motor 115/230 VAC
Double Duty 1/3 HP motor from a Delta Lathe. 1425 RPM, 110/220 VAC, Frame 165( Bolt Pattern at Frame is 3.000 x 4.875) and Double 1/2" diameter shafts. Motor is in great shape, runs with no noises or vibrations. Switch tested and works great. Thanks, Steve. FREE SHIPPING TO THE LOWER 48 STATES!
|
|
|
1985 12” Cabinet Model Delta Rockwell Heavy Duty Variable Speed Wood Lathe&Tools
Normal 0 Normal 0 Normal 0 Normal 0 1985 12” Cabinet Model Delta Rockwell Heavy Duty Variable Speed Wood Lathe Model# 46-450 With Accessories: This wood lathe is in very good useable condition. I purchased the lathe used; eBay auction in the summer of 2005. All of the Delta/Rockwell Accessories were also purchase from eBay used over the years. This lathe is use on a regular basics. So it has not been sitting around collecting dust, dirt and rust. The model number is 46-450. The Motor is 1 hp. Capacitor start. Dual voltage signal phase 115/ 260 volt motor. Includes push button on and off switch, 6 foot new electrical cord. The motor has been recently rebuilt. The head stock spindle bearing and variable speed belts are in very good condition. The head stock bearings are double row. Preloaded, sealed for life ball bearings. The ball bearings ... moreare design to permit maximum thrust for heavy turnings and metal spinning. This lathe has the famous indexing mechanism, can be engaged at will by the unique indexing pin giving you the maximum number of 48 index divisions with the use of the large and easy to grip hand wheel. The headstock and bed have been engineered for heavy and rough turning. Belts and pulleys are enclosed for safety. The bed ruggedly constructed to minimize vibration. The bed and head stock mounting are precision ground simultaneously for absolute alignment. The universal tool support tailstock is graduated. It will lock to the bed at any position. The graduated sleeve is machined for number 2 Morse taper centers. Centers self-ejecting. This lathe can also be used for light metal turning. Refer to Delta/Rockwell catalog for metal lathe accessories. The wood lathe specifications are as follows: Swing Over Bed 12” Swing Over Gap 16-1/2” Diameter for 3-1/2” Stock· Distance Between Centers 38” Length of Bed(overall) 59-3/4” Variable Speed Drive 340 RPM to 3200 RPM. Spindle Diameter 1-1/4” Spindle Thread 1” 8· Overall Length 63” Width 22” Height 46-1/2” Spindle Hole 5/8” Head Stock and
|
|
|
DELTA ROCKWELL TABLE SANDER FILER 115 VOLT WOOD SHOP ( LATHE SALE ) shiner, tx.
SET-UP FOR 115 VOLT OR MODIFY TO 220 VOLT! BRAND NAME"ROCKWELL/ DELTA" MADE IN. USA, APPROXIMATLY 8 YEARS OLD THIS MACHINE IS ONE OF SEVERAL WOODWORK MACHINES. RADIAL SAW, WOOD LATHE, METAL LATHE DRILL, ETC. SEPARATE AUCTIONS) RATED WORKING CONDICTION AND IS SOLID HEAVY DUTY INDUSTRIAL MODEL THIS MACHINE INCLUDES STAND BUT MAY SAVE YOU $70.00 SHIPPING. IF YOU EXCLUDE IT MACHINE IS PRECISION BUILT. HEAVY METAL BIDDERS ARE WELCOME TO VIEW OR TEST WIN BIDDER WELCOME TO PICK UP OFF MY DOCK. 412 W. RUNK/SHINER, TX. 77984 OPTION TO SHIP IN PACKAGE 1 AND CRATED PACKAGE2- UPS TO ANY 48 CONTIGOUS STATES- REQUIRES 10 DAY PREPARATION- $140.00 S&H PAYMENT TO MADE WITH PAYPAL OR OK TO MAIL PAYMENT. DUE 5 DAYS AFTER AUCTION THIS IS NOT FOR SALE OUTSIDE OF U.S.A. AMERICAN BUYERS ONLY Powered by The free listing tool. List your items fast and ... moreeasy and manage your active items.
|
|
|
3 STEP PULLEY LATHE ATLAS CRAFTSMAN DELTA ROCKWELL WALKER TURNER ETC.
3 STEP PULLEY LATHE ATLAS CRAFTSMAN DELTA ROCKWELL WALKER TURNER ETC. Brand Unknown Packaging None Condition Excellent Quantity 1 3/4" Bore- 2" Height- 1/2" Belt- Aluminum. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Rockwell/Penncraft Radial Arm Saw, Band Saw, Jointer/Planer, and Lathe
For sale are early 1960's Woodworking Power Tools manufactured by Rockwell and sold under the trade name Penncraft a J.C. Penny brand. They are heavy duty. Made of cast iron, and very well built. There is a 9" should fit a 10" blade) Radial Arm Saw(model 4183, Rockwell Model# 33-310) in good working condition which includes a steel stand. A nice feature about this saw is that the saw unit rotates under the arm rather than having to rotate the whole arm to do an angle cut, which takes less space. See link below for more info. There is also a Bandsaw(model#4110) with a bad motor. But it has extra blades and a"resaw" accessory. There are two Planer/Joiners(model#4111 Delta 37-110) and an unknown model Craftsman. http:vintagemachinery.org/pubs/1141/488.pdf Included is a Lathe with stand. And accessories including a full ... moreselection of never used knives, etc. There is also a Belt Sander(not shown) needing some attention, a Jigsaw(not sure of it's running condition, but the switch is broken) Included are two working motors both rated at 1/2 H.P. one at 3450 r.p.m. and the other at 1725 r.p.m. perfect for the Bandsaw) and extra casters. I can deliver within a"short" distance for a small fee if needed. This is sold"AS-IS, No Return, Local Pick-Up" so please let me know if I can answer any questions before buying. Thanks, Neville
|
|
|
Banjo or Tool Rest Stand from Delta Rockwell Wood Lathe
All items included are pictured. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1482dacfa80-0xe9-
|
|
|
Headstock Spindle bore Reducer Sleeve for a Rockwell Delta 11" Metal Lathe
Headstock Spindle bore Reducer Sleeve for a Rockwell Delta 11" Metal Lathe, Click to View Image Album Click to View Image Album This tapered spindle bore reducer sleeve has been tested on a R-D 11" metal lathe. Since I don't know the taper on adapter OD. I don't know if it fits other lathes. The ID is tapered for a 2 MT center or? Guaranteed to fit the R-D 11" lathe spindle! We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means ... morewe are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing se
|
|
|
Vintage Delta Rockwell 3/4 H.P. 1725 RPM Motor Wood Lathe Drill Press Jointer
Vintage Delta Rockwell 3/4 H.P. 1725 RPM Motor Wood Lathe Drill Press Jointer Description: Vintage Delta Rockwell 3/4 H.P. 1725 RPM Motor Wood Lathe Drill Press Jointer with Switch This is a great old Delta Rockwell 3/4 H.P. 1725 RPM motor. It came from a Delta 6" jointer but could also be used on a jointer. Drill press, wood lathe or other tool requiring a 1725 rpm motor. It's in e xcellent con dition. Please see the pictures for details. Model 62-245 3/4 Horsepower 1725 RPM 115 or 230 volts 11.2 or 5.6 Amps Single phase 5/8" Shaft Reversible Please see the pictures for details. We accept PayPal. Item to be shipped via USPS Parcel Post or FedEx Ground. Check out my other items!
|
|
|
Sanding Plate or Disc from Delta Rockwell Wood Lathe #46-111
I am parting out a Delta 46-111 Lathe that was in excellent condition. All parts are shown actual what you are bidding on. All are in excellent condition unless otherwise noted.
|
|
|
DELTA ROCKWELL 11/14 WOOD LATHE MOTOR SWITCH PULL ROD
DESCRIPTION: USED. PULL ROD FOR THE SWITCH ON THE 11/14 WOOD LATHE WITH IRON LEGS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS.
|
|
|
VINTAGE DELTA ROCKWELL WOOD LATHE DUPLICATOR JIG FIXTURE
DESCRIPTION: USED. DELTA ROCKWELL WOOD LATHE DUPLICATOR. THIS CAME WITH AN 11/14 LATHE THAT I RECENTLY PURCHASED. THE SECTION WITH THE WOOD ON IT IS 32 1/4 LONG. THE MOUNT BRACKET HOLES ARE 23" APART O.C. APPROX. EVERYTHING MOVES LIKE IT SHOULD. LOOK AT THE PICTURES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; ... moreNO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and Internation
|
|
|
Delta Rockwell Milwaukee Lathe 24" Scroll Saw Four 4 Step Motor Pulley 718 Band
DELTA ROCKWELL FOUR STEP PULLEY No. 718 WITH 1/2" BORE WAS USED ON THE 24" SCROLL SAW AS THE MOTOR PULLEY AND ON THE WOOD/ METAL 14" BAND SAW. WAS ALSO USED ON SOME VINTAGE LATHES AND OTHER DELTA ROCKWELL TOOLS. PULLEY IS IN EXCELLENT CONDITION WITH NO DAMAGE. CRACKS OR REPAIRS AND COMES WITH BOTH SET SCREWS.
|
|
|
6" Lathe Face Plate 1" X 8 TPI Delta Rockwell Powermatic Craftsman Metal-Wood
6 Inch Lathe Face Plate. Measures 6" diameter. And approx. 1-1/8" in height, with approx. 1/2" thick plate. 4) 1/4 thru holes, 4" center to center diagonally. Will fit any lathe with 1" x 8 TPI spindle. Please see photos for condition. Any questions please email. Payment to be received within 7 days of auction end. Most items shipped next day of cleared payment. Satisfaction guaranteed if not satisfied for any reason just return. Thank You.
|
|
|
Delta / Rockwell CBL-409 Bearing Retainer / Cover for Heavy Duty Wood Lathe
Delta/ Rockwell Bearing Retainer for Heavy Duty Wood Lathe. Rockwell part number CBL-409. Came from a model 46-450 wood lathe but I believe it will fit other models as well. The piece is fully functional but the original chrome finish has mostly worn off. Mounting screws are included. Payment by Paypal. Payment required within 72 hours of the end of the auction. Normally ships the next day. Will ship anywhere in the U.S. No international shipments. Shipping is by USPS First Class Mail.
|
|
|
Dayton 1 HP 115/230 Motor 1725 RPM Reversible was used on Delta Rockwell Lathe
Dayton 1 HP motor from a Rockwell Delta Lathe. 1725 RPM, 115/208/ 230 VAC, Reversible, Frame LS66, one 3/4" diameter shaft with keyway. Motor is in great shape, runs with no noises or vibrations. Comes Wired for 115 VAC. This motor weighs in at 40 Lbs. Mounting plate is 5.00 x 6.00(5" x 6" FREE SHIPPING TO THE LOWER 48!
|
|
|
Rockwell Heavy Duty Cabinet Model Variable Speed 12" Wood Lathe + Extras
Rockwell 12" wood turning lathe. This is a heavy duty industrial grade lathe. It is currently set up for 3 phase. A VFD unit is an easy and cheap way to convert to single phase and it gives you an infinite range of speeds. You could also use a phase converter. The lathe has a full length plexi-glass guard that flips up out of the way. Two 6" face plates, one 3" face plate, a 12" and a 6" tool rest and a steady rest. It has a variable speed set up also. The discoloration in the pictures is not rust, but glue and stain residue. The stain is also on the plexi-glass safety shield. The tailstock wheel hub is broken as shown in the pictures, it is usable but it has a wobble. With a good cleaning up it will be a nice lathe. A duplicating attachment is also available for an extra $200 and a new Nova chuck with 4 sets of jaws ... moreis available for $250. Ask any questions before bidding. Bring some help to load it. It's heavy. This is also advertised locally so I may end the auction early if it sells there.
|
|
|
VINTAGE ROCKWELL CARBIDE WOOD WORKING LATHE TOOL
THIS ROCKWELL LATHE TOOL. IS A CARBIDE 1/8" ROUND NOSE 14 1/2" LONG AND IT IS IN PERFECT CONDITION. WILL SHIP TO LOWER 48 ONLY)
|
|
|
SET OF FOUR VINTAGE ROCKWELL LATHE TOOL CHISELS
THE SET INCLUDES. 1 1/2" GOUGE, 1" GOUGE, 1/8" PARTING TOOL AND 1/2" V POINT/DIAMOND POINT. 15" TO 17" LONG, IN VERY GOOD CONDITION. ALL ARE SHARP AND READY TO USE. WILL SHIP TO LOWER 48 ONLY)
|
|
|
vintage Delta / Rockwell wood lathe parts - DDL191 top of outboard stand
I picked up a large bunch of used delta parts and pieces recently. Most all are quite used, scratched, some rust etc all come as shown. This top piece of an outboard stand came from and estate sale' I don't even like thinking about the time I spent trying to find the rest of the stand on the property. This piece is in nice clean condition. Please check the various shipping options. Cheapest does not always show up first. Shipping is per ebay calculator per weight. I do not add any for handling. Packaging nor any other reason. Ships to United States only. 9-6-2.
|
|
|
Vintage Rockwell Delta 1460 Wood Lathe Headstock Cover Cast Iron Excellent
Vintage Rockwell Delta 1460 Wood Lathe Headstock Cover Cast Iron Excellent Description: Vintage Rockwell Delta 1460 Wood Lathe Headstock Cast iron Cover in Excellent Condition Came from a Delta Model 1460 12" Wood Lathe. This is the cast iron pulley cover for the headstock. It's in excellent condition. Please see the pictures for details. We accept PayPal. Item to be shipped via USPS Check out my other items!
|
|
|
Vintage BENCH TOP WOOD LATHE ATLAS DUNLAP ACME ROCKWELL not sure
Vintage bench top wood lathe All parts move freely Overall bed length 30 inches Great vintage piece for your shop Money back if not completely satisfied
|
|
|
DELTA Ball Bearing ROCKWELL Drill Press Lathe Scroll Bandsaw 1/3 HP Motor 110220
Double Shaft Ball Bearing 1/3 HP motor from a Delta DP 220 Drill Press. 1725 RPM, 110/220 VAC, Frame 165( Bolt Pattern at Frame is 3.000 x 4.875) and Double 1/2" diameter shafts. Motor is in great shape, runs with no noises or vibrations. Switch tested and works great. Thanks, Steve. FREE SHIPPING TO THE LOWER 48 STATES!
|
|
|
11" Delta Rockwell Lathe Gear Cover
Delta Rockwell 11" Metal Lathe gear box cover in great shape.hinge in great shape as well as the lube data plate. I don't think it was ever used.Removed at purchase to install a Royal collet closer with cover.shelf wear only.
|
|
|
Delta Rockwell Wood Lathe, 3 Jaw Chuck, 6" OD. 1"x 8 TPI Mounting.
Used 6" 3-jaw from a vintage Delta Rockwell 12" wood lathe. Mounts to the 1" x 8 tpi drive shaft of the delta wood lathes. Jaws are reversible. Good condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Milwaukee Rockwell wood lathe 12" tool rest CWL-70
I'm cleaning out my shelves and parting with many woodworking accessories. This is a nice older tool rest used on older Delta/Milwaukee and Delta/Rockwell lathes. The casting says CWL-70 on one side and 434-03-012-5002 on the other side. The edge where the turning tools slide looks to be in excellent condition. The center post is 1" diameter by 2 1/8" long. This is an earlier version of the commonly advertised DDL-12 tool rest. The item will be shipped via USPS and payment would be appreciated as soon as the auction ends. Once payment is received. The item will be dropped off at the Killeen, Texas Post Office and I have had very quick delivery on letters and packages over the years.
|
|
|
DELTA ROCKWELL HANDLES DRILL PRESS LATHE JOINTER
Up for sale is a Delta Rockwell machine handle. Item is in good usable condition and fits various machines. DDL-160 Bore 1/2" Sale is for 1
|
|
|
Delta Milwaukee Rockwell wood lathe model 46-525. Complete ready to use.
No shipping unless the buyer arranges it. I'll do all I can to assist. Variable speed model in excellent condition. Everything works properly. It has a little easily-removable oxidation. 120/240 volts single phase. Currently wired for 120 volts. The plastic speed-control handle broke off but the machine shop is making a replacement right now to be included. Includes everything shown below. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
|
|
|
Vintage Dayton 3/4 H.P. 1725 RPM Motor Wood Lathe Drill Press Jointer Rockwell
DAYTON 3/4 H.P. 1725 R.P.M. MOTOR MADE IN THE U.S.A. THIS REVERSIBLE MOTOR RUNS STRONG AND COMES WITH A CORD AND PLUG. Cord shows some wear but is usable) SINGLE PHASE 115/ 208-230 VOLTS. 10.8/ 5.3-5.4 AMPS. MODEL 6K123-C FRAME G-56. THIS HEAVY DUTY MOTOR HAS A 5/8" DIA. SHAFT. MOTOR WOULD BE EXCELENT FOR A BAND SAW DRILL PRESS. WOOD LATHE OR JOINTER. THIS HEAVY DUTY MOTOR WEIGHS APPOX. 30 POUNDS AND WILL SHIP FREE TO THE LOWER 48 STATES ONLY. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-1488593fbdf-0x114-
|
|
|
Vintage Delta Rockwell 1 H.P. 1725 RPM Motor Disc Sander Wood Lathe Drill Press
ROCKWELL 1 H.P. 1725 R.P.M. MOTOR MADE IN THE U.S.A. BY BALDOR ELECTRIC Co. THIS REVERSIBLE MOTOR RUNS STRONG AND COMES WITH A GOOD CORD AND PLUG. SINGLE PHASE 115/ 230 VOLTS. 20/ 10 AMPS. MODEL 82-041 FRAME 143T. THIS HEAVY DUTY MOTOR HAS A 7/8" DIA. SHAFT AND THE FRAME WILL FIT ON THE DELTA ROCKWELL 12" DISC SANDER. MOTOR WOULD ALSO BE EXCELENT FOR A DRILL PRESS. WOOD LATHE OR JOINTER. THIS HEAVY DUTY MOTOR WEIGHS APPOX. 40 POUNDS AND WILL SHIP FREE TO THE LOWER 48 STATES ONLY.
|
|
|
Good Used Rockwell Delta Heavy Duty Wood Lathe Headstock Spindle for 12" Lathe
Good Used Rockwell Delta Heavy Duty Wood Lathe Headstock Spindle for 12" Lathe, Click to View Image Album Click to View Image Album Click to View Image Album This is a good used headstock spindle that is designed for the Rockwell Delta Heavy-Duty 12" wood lathe of yesteryear. Has 1"8tpi threads R& L and is guarnateed in good condition. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. ... moreIf we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs
|
|
|
Vintage Delta Milwaukee Rockwell 1460 12" Wood Lathe Bed 1 1/2" Gap CBL 400
Very nice condition. Please review photos and email any questions.
|
|
|
Vintage Delta Milwaukee Rockwell 1460 Banjo 1" Tool Holder 12" Lathe CBL 433
Very nice condition. 1" Please review photos and email any questions.
|
|
|
Vintage Delta Milwaukee Rockwell 1460 Head Stock 12" Wood Lathe CBL 401 CBL 404
Very nice condition. With wrench. Please review photos and email any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1488d8112f2-0x109-
|
|
|
Four 4 Step Groove Pulley 1/2" Bore from Rockwell Delta Lathe
Good condition. Please review photos and email any questions(GL)
|
|
|
Rockwell 46-800 Lathe Cover Guard
Guard is pulled from an Oliver 2159 14" lathe. Guard is complete devoid of any repairs or missing parts.
|
|
|
Tailstock for Delta Rockwell lathe 10"? view pics of lathe
Tailstock for Delta Rockwell lathe 10" view pics of lathe give us a call or email us with questions 203-266-6138
|
|
|
ROCKWELL * DELTA 11" WOOD LATHE - NO.46-111- GRIZZLY H8021/H5979 SETS + 8 TOOLS
Welcome. We have a nice Rockwell model 46-111 wood lathe and accessories. The lathe comes with all the accessories and tools shown, including the Grizzly H8021& H5979 sets. The motor runs on 1-10 voltage. It is 53" wide and 44"high. We will help with any and all delivery requests. Local pickup is always welcome and free. Any questions please email or call 516-676-7341. Thank you for the interest. Enjoy your day. Take care.
|
|
|
Rockwell Wood Lathe 10 Inch Tool Rest # 425-99-058-0005
Good condition.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148aec60399-0x106-
|
|
|
Delta Rockwell Lathe 3x5 L Tool Rest 3/4" post Bowl Turning
Harvested from 1953 Rockwell wood lathe. No cracks or repairs. L shaped Tool rest 3" x 5"with 3/4" post. Unmarked in good condition.
|
|
|
ROCKWELL MACHINE TOOLS CATALOG AD-2660 1972 #RR331 saw mill grinder lathe feeds
This sale is for ONE previously owned COPY( original works not photocopies) of: Rockwell Manufacturing Company. ROCKWELL MACHINE TOOLS. AD-2660, Pittsburgh 1972) 59 pages bound in a sightly dirty soft cover with three holes punched near the spine(for storage in a dealer's binder) The catalog offers images, descriptions, machine data and specifications for band saws, metal lathes, hand screw machines, horizontal-vertical milling machines, vertical milling machines, horizontal milling machines, power feed table feed, toolmakers grinders, radial drilling machines, coolants, layout plates, and motors. This item is in excellent overall condition and would make a nice gift for the collector of Rockwell products. This PUBLICATION is being offered at an exceptional price. A rule may appear in the photographs for scale reference only and is not ... morepart of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of
|
|
|
Knurling Tool Quality Import For Atlas Logan Craftsman Rockwell South Bend Lathe
Description | Payments | Shipping | Feedback | Disclaimer | Links | Bidding You're Bidding On Manufacturer: Import Model Number: Description: Knurling Tool Quality Import For Atlas. Logan, Craftsman, Rockwell. South Bend, Lathes. 3/4" x 5/16" Shank Item Condition: Used 1 time. Almost new Size: Additional Information We Combine Shipping On Multiple Items To Save You Money. If you're buying multiple items please wait for an invoice before paying. The shipping calculator doesn't work well on combining shipping. We Combine Shipping On Multiple Item Purchases To Save You Money PAYMENT METHODS ACCEPTED Visa. MasterCard, Discover, American Express And eChecks Via PayPal. Ohio Residents Must Pay 7% Sales Tax Payment must be received within three days. Back To Description SHIPPING INFORMATION After winning an auction. Please ... moreuse the"PAY NOW" button, this will take you to the Checkout page where you can complete the transaction. If you won multiple items. Please wait for us to send an invoice with the Combined Total. Plus Shipping. However there may be cases when the items can't be combined due to excessive weight or heavy& fragile items together. If so. I'll notify you by email. As a rule. Items are normally shipped the next business day after payment is cleared. You will receive an email notice with a tracking number when your item has shipped. Note! All shipments are with Delivery Confirmation or Tracking Number. Back To Description FEEDBACK It is our policy to always leave an automatic positive feedback once your payment is received and cleared. Please do the same for us once you receive your item. If there is a problem with your item. Please contact us immediately. We always do our best to resolve any problems. A Note About DSR's. Or Detailed Seller Ratings Item as described: I do my best to give an accurate description on every item I sell. If you are unhappy with your item and feel it was misrepresented please contact me and give me a c
|
|
|
Delta Rockwell Wood Lathe 6" Face Plate 1" x 8 tpi RH and LH Threads CAT. #937
For sale is a older Delta. Catalog#937, 6" diameter, in good used condition. For 11" to 14" wood lathes. It has 1" x 8 tpi with both RH and LH Threads.
|
|
|
Delta Rockwell 3" Lathe Face Plate Faceplate No. DDL 180
Delta Rockwell 3" Lathe Face Plate Faceplate No. DDL 180 Description: Delta Rockwell 3" Lathe Face Plate Faceplate No. DDL 180 Came with a Delta 1460 lathe. This a used 3" diameter Delta Rockwell Lathe Face Plate Model No. DDL 180. It's in excellent condition and may have never been used. Please see the pictures for details. We accept PayPal. Item to be shipped via USPS Check out my other items!
|
|