|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Condition: Used Location: Kent, United States These costs include, but are not limited to, certificates and/or permits required to move the goods within or across state, province and/or country borders.
Condition: Used Location: Harrison, United States As of January 1, 2021 for vehicle models 2011 or newer, the exemption is 20 years. All vehicles are sold as is - where is. The photographs and any video ... moreshown are of the actual item (unless otherwise noted).
|
|
|
|
Harrison 15x36" Lathe in/mm with Aloris Toolpost
Very good condition Harrison 15x36" lathe with a excellent Buck adjust-tru 10" 3 jaw chuck. Lever collet closer and adapter for 5c collets, Aloris CXA toolpost and some holders, live center, and tailstock chuck. Ways are good with minor wear near the head- no ridges or gouges just a very slight roughness. The machine is ready to use. Inspection in my Aberdeen, NJ shop under power is welcome call 917-974-7381. NY and NJ residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
|
|
|
Harrison Model L15 15/23" x 50" Engine Lathe with gap, DRO and Tooling
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Nice Harrison 15" X 50" engine lathe with removeable gap(23" and D1-6" camlock spindle nose. There is a working Mitutoyo digital readout on the longitudinal axis. It has 18 spindle speeds from 35 to 1.500 RPM. There are 47 threads from 2 to 60 per inch and 47 feeds from 0.0015 to 0.046" There are two chucks. A 10" 3 jaw with top jaws and a 10" 4 jaw. It comes with a Jacobs 16N ball bearing super chuck(5/8" capacity including chuck key. There is also a 14" faceplate and live center. The lathe runs excellent. The ways look excellent with no visible signs of wear. This is a former State of California machine with low hous. Loading and skidding is free. Made in jolly old England. You can come over and run it by appointment You can see or ... morepick it up at Industry Machinery Sales 5731 Waco St. Chino.Ca 91710 909-595-3131
|
|
|
Harrison Geared head Tool Room Lathe
Model No: M-300 Serial No: 300096 15287 13" Swing 36" Between Centers 3 HP Motor 58-2500 RPM Inch and Metric THD D1-4 Spidle Mount 1 1/2 Spindle Hole 6" 3 Jaw Chuck Truel Dial on Long Feed MM Scales for Cross and Compound Feeds Steady Rest Carriage Stop Live Center Coolant Pump& Tank Electrical Diagram Hardened Ways 220/440/3 Power. Call Jack for details 860-559-8184.
|
|
|
Harrison M750 30" - 41" x 13' Removable Gap Bed Lathe 10 - 800 RPM 6" Thru Hole
Harrison M750 Removable Gap Bed 30" 41" x 13' Model M750. S# LB0072, Date Mfg. 2002, 30" Swing(41" in 14.75" removable gap) 20-3/8" Swing over cross slide, 13' 1" Between centers, 24 Spindle speeds from 10 to 800 rpm, 6.5" Thru hole. 27.5" 4 Jaw chuck, Inch/Metric threading, X/Y DRO(not installed yet) Controls on carriage, Rapid traverse, No.6 morse taper on tailstock, Coolant, 2 Roller bearing steady rests with 19" 13" Thru holes, Aloris 2 way tool post w/ 7 holders, Tool box w/ Misc. tools/wrenches, 1 Live center& 2 dead centers, 3 Change gears, Steel leveling pads, Rear splash guards, Slide out chip catch pans, Operation& parts manuals& electric prints, 25hp 480v 3ph 60hz, Overall Dim. 19' 7"L x 4' 7"W x 5' 7"H, Est. Wt. 12,000 lbs. Shipping: ... moreThe buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
Engine Lathe Geared Head Harrison Model M400 16" x 80" from assetexchangeinc.com
Harrison Model M400 16" x 80" Geared Head Engine Lathe Specifications Swing Over Bed: 16" Swing Over Carriage: 10" Distance between centers: 80" Spindle speeds: 40- 2000 RPM, Spindle Bore: 2 9/16" Spindle Nose: D1-8" Camlock, Main Motor Drive: 10 HP, Equipped With: 10" 3-Jaw Chuck. 7" Capacity 3 Point Roller Bearing Steady Rest, Dial Thread Chasing Attachment, Carriage Stop, Coolant Pump and Piping, Hardened Bed Ways, Quick Change Tool Post, Tailstock, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. Machine is located in New Jersey If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com See video at http:youtu.be/QZduoEJPbPI
|
|
|
2008 Harrison Alpha 1550XS Lathe with GE Fanuc 21i-TB
Normal 0 false false false EN-US X-NONE X-NONE 2008 Harrison Alpha 1550 XS Combination Lathe with G.E. Fanuc 21i-TB SEE ATTACHED SPECS ATTACHED WITH PICTURES. This is a current trade-in and the machine can view under power at customers facility for the next couple of weeks. Machine is in great condition. FOB OKC. OK Specifications are Estimates and Subject to Change. Machine is fully operational and in service and can be viewed by appointment only. All prices are quoted FOB: seller's floor unless specified otherwise. STANDARD TERMS AND CONDITIONS OF SALE Machines are subject to seller's terms& conditions below and notes: The goods sold are second hand goods and seller therefore makes no warranty of any kind. And sells goods"As is, As inspected, And"With all faults. And makes no warranty of any kind whatsoever, specifically ... moreany warranty of merchantability or fitness for a particular purpose. Seller disclaims any reliance by buyer on seller's skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. Buyer acknowledges that specifications shown are those provided by OEM and may have been altered or modified since original purchase. TERMS: All payments must be received within 10 business days and prior to shipment of machine. All sales are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: Please Do Not Pay until you have received our invoice. Payments by company check will be held for 10 business days until check clears. Seller accepts money orders. Bank checks, or wire transfers. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. Freight costs to be quoted at time of sale from originating zip code. Local pickup is ok.
|
|
|
HARRISON 15" GAP BED GAERED HEAD LATHE REBUILT. COLCHESTER, SOUTHBEND LeBLOND
HERE IS A NICE RUNNING HARRISON 15" GAP BED GEARED HEAD LATHE. THIS LATHE CAN BE INSPECTED IN MPLS MN. TO SET UP AN INSPECTION. PLEASE CALL JIM@ 952-931-7974. THANK YOU. HARRISON 15" GAP BED GEARED HEAD LATHE MAKE: HARRISON MODEL: 15 SERIAL NO: 121988 GENERAL SPECIFICATIONS; SWING OVER BED.15" SWING WITH GAP OUT.23" HOLE THRU SPINDLE.2-1/4" SPINDLE SPEEDS(18)35 TO 1500 RPM TAILSTOCK NOSE TAPER.NO 4 TAPER HORSE POWER.5 HP ELECTRICS.230/3PH/60 OVER ALL DIMENSIONS.86" X 30" X 55"H WEIGHT.APPROX 2000 LBS EQUIPPED WITH: PNUEMATIC COLLET CLOSER. MISC CHANGE GEARS, ALORIS TOOL POST, 8" ROHM 3 JAW CHUCK, INCH THREADING, DOG PLATE, CARRIAGE STOP, MISC TOOLS. NOTE: NOTE THIS MACHINE WAS REBUILT IN 2002 AND SAT IDLE FOR 9 YEARS. THIS LATHE HAS BEEN CLEANED AND CYCLED AND IS IN EXCELLANT RUNNING CONDITION ... morePRICE LOADED ON YOUR TRUCK.$5950.00 SOLD AS IS AS INSPECTED
|
|
|
Harrison 13" x 40" M300 Engine Lathe - Loaded w/ Accessories
Harrison 13" x 40" M300 Engine Lathe- Loaded w/ Accessories, Click to View Image Album Click to View Image Album Click to View Image Album Harrison M300 w/ 3HP. 3Ph. motor operates great. Accessories included follow: 8" Buck Adj-Tru chuck w/ both sets of jaws, 8" Buck 4 jaw chuck both D1-4 drive. 5C lever collet closer, factory taper attachment, steady rest, follower rest, micrometer carriage stop. 3 MT dead center, live center& keyless chuck for the tailstock. Aloris BXA quick change tool post with 5 different tool holding bars. A set of transposing gears for cutting metric threads. Standard equipment on this lathe includes foot brake, coolant pump& resevior, locking compartment under bed for small accessory storage(keys included) and the Dual Dial feature on both the cross slide and compound. A twist of the wrist ... morechanges the scale from metric to English and back. Note the close-up pictures of the ways near the headstock. No sign of damage or wear. This is a low hours machine with 95% of it's original paint intact. Probably the best equipped lathe on eBay either new or used! Add a few cutting tools and you are in business and suffering from extreme pleasure in using a great lathe. Inquire about delivery or if you are local we can forklift load at no charge. 949.645.7601 We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay
|
|
|
HARRISON 21X60 HEAVY DUTY HIGH SPEED PRECISION LATHE
HARRISON HEAVY DUTY HIGH SPEED PRECISON LATHE 21"X60" CLUTCH DRIVE. 12" 3-JAW. 3" SPINDLE BORE, REMOVABLE CHIP PAN, FULL LENGTH SPLASH GUARD. MACHINE PROFESSIONALLY MAINTAINED. GREAT RUNNING CONDITION. EVERYTHING WORKS. 480 VOLT ELECTRICS. READY TO PLUG IN AND RUN. SELLING FOR ONLY $6500.00. CALL TODD AT WEBB MACHINERY. CORONA, CA. 951-277-8885.
|
|
|
ENGINE LATHE MAKE- HARRISON MODEL-M250 12" X 30"
ENGINE LATHE MAKE- HARRISON MODEL-M250 12" X 30" PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143087d07e1-0xfc-
|
|
|
ENGINE LATHE MAKE- HARRISON MODEL-M250 12" X 30" DRO
ENGINE LATHE MAKE- HARRISON MODEL-M250 COLANT SYSTEM MACHINE TREAD MM AND INCHES MACHINE IS IN GREAT WORKING CONDITION DIGITAL READ OUT size: 12" X 30" PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO ... moreYOUR TOTAL ITEM PRICE. THANK YOU.
|
|
|
2004 LAGUN Flat bed CNC LATHE ANILAM 4200 Tm1 Tm2 harrison romi haas Fryer Trak
We have for sale a like new 2004 Lagun Republic 14x40 CNC/ manual lathe with VERY LOW HOURS Includes 8" 3 jaw Bison chuck. And 10" 4 jaw Bison chuck. Anilam 4200T Control. Horse Power: 5 Max rpm: 3000 Distance between centers: 40" Swing over bed: 14" Spindle Taper: D1-6 Tail Stock Taper: MT4 Control System: Anilam: 4200T Drive System: Yaskawa AC brushless motors and drives Weight: approx: 5000 lbs. You are more than welcome to inspect this machine under power. We can prepare for shippment and load onto buyers transport free of charge. If you would like more information or to make an offer please call or text me@ 573-578-9890 VIDEO Posted with
|
|
|
Harrison 16x60 Lathe. Parts or project machine. Selling as is. ways pretty nice
HARRISON 16 X 60" LATHE WITH A 3" + SPINDLE BORE IT COMES WITH A 4 JAW CHUCK. GAP BED. 3"+ SPINDLE BORE. THERE'S A LINK BELOW THAT YOU CAN CLICK ON THAT WILL SHOW YOU THIS MACHINE ACTUALLY RUNNING. I'VE TRIED TO GET AS CLOSE AS POSIBLE TO THE WAYS SO YOU CAN SEE THEIR CONDITION. WE DON'T USUALLY SELL MACHINES LIKE THIS ON E-BAY, BUT WITH THE BIG BORE, THE FACT THAT IT RUNS, AND THE CONDITION OF THE WAYS, I DON'T WANT TO SCRAP IT. YOU ARE BUYING IT WITH THE UNDERSTANDING THAT IT IS MISSING ALOT OF TAILSTOCK PARTS. AND YOUR ARE BUYING IT"AS IS" IT IS PRICE ACCORDINGLY. WE'RE A SMALL SALES OUTFIT BENT ON SELLING GOOD USED MACHINERY AT A FAIR PRICE. JUST CHECK OUT MY PRICES VERSES MY COMPETITION. WE DON'T HAVE 15000 FEEDBACKS, LAST CHECK I THINK I'M AROUND 750 OR SO. WE'VE EARNED THEM ONE ... moreAT A TIME. CHECK OUT OUR FEEDBACKS, YOU'LL SEE TIME AND TIME AGAIN THAT I DESCRIBE MY EQUIPMENT WELL AND GET IT THERE SAFELY. VIDEO LINKS TO THIS MACHINE RUNNING VIDEO PROMO OF LEE'S MACHINERY WE'RE A FOUR MAN SHOP. LEE(MY DAD) HAS BEEN DOING THIS FOR 50 YEARS AND IS PRETTY MUCH RETIRED, MIKE(ME) WHO'S BEEN DOING THIS FOR 20+ YEARS, MEL 5 YEARS AND DENVER(MY SON) WHO BEEN HERE FOR A LITTLE OVER A YEAR NOW. NICE EQUIPMENT AT A FAIR PRICE AND WE GET IT THERE IN ONE PIECE. WE HAVE OVER 40 BRIDGEPORT OR BRIDGEPORT TYPE MILLING MACHINES IN STOCK! WE ALSO HAVE LATHES, GRINDERS, BANDSAWS, HONES, DRILL PRESSES, TOOLING,ETC. I DON'T LIKE USING THE AUTOMATIC FREIGHT CALCULATOR. I LIKE TO PUT THE TRUCKING COMPANIES UP AGAINST EACH OTHER SO I GET SOME GOOD COMPETITIVE PRICES. JUST E-MAIL ME WITH YOUR ZIPCODE AND LET ME KNOW IF YOU CAN UNLOAD ON YOUR END VIA- LIFT TRUCK, OR LOADING DOCK. WE WILL LOAD ONTO YOUR TRUCK AT OUR LOCATION UNSKIDDED AT NO ADDITIONAL CHARGE, WE WILL CHARGE $ 100 FOR A CUSTOME SKID OR IF IT NEEDS TO BE FULLY ENCLOSED IN A CRATE WE'LL CHARGE $300 FOR A SKID AND CRATE.
|
|
|
Harrison Model M350, 15" X 50" Geared Head Engine Lathe, Well Tooled
Now available for your inspection under power and purchase at our Warehouse in Beautiful Downtown Mamisburg. Ohio is this"Very Nice" Harrison Model M350 15" swing X 50" cc Geared Head Engine Lathe. W/ Inch and Metric Threading. We have run this machine through all speeds and feeds and find it to be in Excellent Operating Condition. Further. It is equipped with a 2.2" Spindle Hole, Inch and Metric Threading, Steady Rest, Follow Rest, Coolant, and 10" 3 Jaw Chuck. These Harrison Engine Lathes are Excellent Engine Lathes Built With a Lot of Quality in Great Britain. Specifications are as follows: 15” x 50” Harrison Model M350 Geared Head Engine Lathe Serial# M 350816 854 Swing over Bed- 15" Center Distance- 50" Swing over Cross- 9.5" Spindle Speeds(12) 40-2200 RPM Spindle Bore- 2.2" Spindle Nose- ... moreD1-6 Inch Threading- 2-56 tpi Metric Threading- 0.2-14 mm Spindle Motor- 7.5 HP Electrics- 230/460/60/3 Presently 230 Volts Approximate Machine Weight- 3.750 Lbs Approximate Machine Dimensions- 97"LR x 50"FB x 68"H Equipped with: 10" Dia. 3-Jaw Chuck(2) 6" Dia. Dog Plates 7" Dia. Roller Type 3-Point Steady Rest 7" Dia. Roller Type 2-Point Follow Rest Taper Turning Attachement Block Type Tool Post Forward-Reverse Clutch Drive w/Mono-Lever Control at Apron Inch/ Metric Threading Thread Dial Indicator Self-contained Coolant System w/Full Length Rear Splash Guard Electro Magnetic Spindle Brake All Geared Headstock w/Reischauer Ground Gearing& Pressurized Lubrication from a Separate Oil Tank Camlock Spindle Mounted in Gamet Super Precision Roller Bearings Universal Gearbox for Total Inch/Metric Threading Capability Induction Hardened& Ground Bed Ways ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER You can see this very nice machine tool under power at our Warehouse in Beautiful Downtown Miamisburg. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Harrison Model M350 Geared Head Engine Lathe built w
|
|
|
Harrison lathe toolpost grinder
This is a Harrison lathe(11" swing) tool post precision grinder. It comes with mounting fittings to directly replace the standard four-way tool post i.e it has the conical recess and the T-nut for the cross slide. In addition to the removable grinding head for internal bores. As shown mounted, it has a further spare internal grinding head and two external grinding heads with removable guards. All precision bearings are adjustable as is the tention of the flat belt drive. I forgot to show a photograph of a few new internal grindstones and mounting washers which will be included in the sale. The grinder comes with an on-off switch and 13 amp plug. I have tested the unit and it works fine
|
|
|
TWO 4 MT MORSE TAPER CENTRE HARDINGE HARRISON COLCHESTER BOXFORD LATHE
PAIR OF DEAD CENTRES. 4MT WITH SHARP POINTS. TOO BIG FOR MY MACHINES. BIT TARNISHED AND HAVE SOME RUST MARKS. MAY BE USEFUL TO SOMEONE! FREE UK RECORDED SHIPPING WORLDWIDE TRACKED AND SIGNED FOR PRIORITY SHIPPING £28. I AM NOW HAVING A CLEAR OUT OF SOME OF MY OWN PERSONAL MACHINE TOOLS WHICH I NEVER USE. SEE MY OTHER ITEMS! I ADVERTISE MANY OTHER UNIMAT LATHE ACCESSORIES ON ebid.co.uk AS IT IS FREE TO LIST AND LESS FEES. IF YOU WANT ANY SPECIFIC ITEM OFF THAT SITE I CAN SET UP AN EBAY BUY IT NOW SALE FOR YOU. JUST ASK! MY EMAIL ADDRESS IS INCLUDED IN THE CONTACT SECTION PLEASE FEEL FREE TO EMAIL WITH ANY QUESTIONS.
|
|
|
Engine Lathe Geared Head Harrison Model M500 21X80 & tooling, taper attachment
Up for sell is a nice Harrison Lathe the machine is in good shape by no means perfect the ways look good the cross slide does have some play in the handles but most lathes do machine could really use a cleaning and a paint job ad you see in the pictures the swing is 21" I believe the distance between centers is around 80 maybe a little less the machine comes with all tooling shown also the tool post looks to have a 3 1/4 threw hole call or text Tripp at 336 479 6847 thanks
|
|
|
HARRISON ALPHA 400 CNC TURNING MACHINE
HA RRISON ALPHA 400 CNC TURNING MACHINE Serial No. D30024 New 2001. EQUIPPED WITH: Fanuc Quick Panel JR CNC Controls Hardened Ground Bedways RS232 Port 8″ 6-Jaw Chuck. SPECIFICATIONS Swing Over Bed, 15-3/4″ Swing Over Cross Slide, 9-5/8″ Distance Between Centers 50″ Spindle Bore, 2-1/8″ Spindle Speeds( Infinitely Variable) Low Gear, 15-300 RPM, Medium Gear, 35-830 RPM, High Gear, 110-2500 RPM, Spindle Nose, D1-6, Spindle Horsepower, 10 HP, Electrics, 3/60/415V, Approx. Dimensions, 102″ x 60″ x 63″H, Approx. Machine Weight, 4000 Lbs, Machine is being sold as-is as represented by the pictures. There are no warranties or guarantees either expressed or implied. We will load the machine onto your flat bed truck at no additional charge. Buyer is responsible for freight charges.
|
|
|
Using The Small Lathe By: L C Mason. Boxford Myford Colchester Harrison etc.
Using the small lathe By: L C Mason 6" X 8" book with 112 pages See my other items
|
|
|
The Amateur's Lathe By: L H Sparey Boxford Myford Colchester Harrison etc.
The Amateur Lathe By: L H Sparey Covers: Boxford. Myford, Colchester, Harrison, etc. 6" X 8" book with 224 pages See my other items
|
|
|
Harrison A-A Model VS Lathe
Harrison A-A Model VS Lathe Harrison A-A Model VS 13” swing Approximately 24” between centers 3 phase 230V Includes cover not shown We try to describe our items to best of our knowledge but aren’t experts on every item we sell. Please ask questions before bidding or purchasing. ONLY what is shown in the pictures is included. This is being sold as a used working item. If the item is not functioning(unless otherwise noted in the description and pictures above) or if you feel it is not as described we will take it back and refund your money. You must notify us within fourteen days of receipt if you have an issue with this item and return the item in its original packaging. Batteries and plastic socket/ tool trays are not included in our warranty. We do offer combined shipping discounts for multiple items. Final combined shipping rates will depend ... moreon total item weight and dimensions. We strive to ship our items within 1 business days of receiving payment. If the item is to be shipped freight. Please contact us for a shipping quote, or you may arrange your own pickup. We will palletize, strap and shrink wrap your freight item. We charge a $75.00/order fee for these services. If you have an issue or a concern with an item. Please contact us and we will do our best to ensure you remain a satisfied customer. We can be reached VIA E-Bay e-mail or at(603) 965-1000 from 9AM to 6PM eastern time. We leave feedback after we have received feedback from you. THANK YOU!
|
|
 |