|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States The K72 lathe machine chuck works with few vibrations, ensuring you will get accurate finished parts. It features a wide clamping range and high precision. ... moreSo you can deal with a variety of materials after fastening it with a single T handle.
Buy It Now
$10.00 Shipping Condition: New Location: Cave Creek, United States L-00 Spanner Wrench For Lathe Chuck back plate to headstock nut. Made in USA!! Condition is New. Shipped with USPS Retail Ground.
Buy It Now
$20.00 Shipping Condition: New Location: Schaumburg, United States Can Use Any Size 5C Collet From 1/16 through 1-1/8". The mounting holes are already drilled and tapped. This work just like assembly a 3-jaw chuck with ... morea new back plate. As this final assembly work is done on your own, final use lathe, usually can reach the highest TIR accuracy.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. This versatile chuck is made of high-quality hardened steel, compressionresistance and has a long service life. It has two-way jaws ... moreto hold industrial parts in the size range 0.24" / 6 mm - 9.84" / 250 mm.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. This versatile lathe chuck is made of high-quality hardened steel, compression resistance and has a long service life. This chuck is ... morea short conical connection with high centering accuracy, good rigidity, and short overhang.
Buy It Now
Free Shipping Condition: New Location: United States The 3 jaw lathe chuck is suitable for a variety of general-purpose lathes, economical CNC lathes, grinding machines, milling machines, drilling machines, ... moreand machine tool accessories. This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States The lathe chuck is made of high-quality cast iron, rigid and sturdy. Each pinion is ground and hardened to HRC 43/2, the jaw teeth and the guide are both ... moregrounded and hardened to HRC 58-62. 4-Jaw Independent Lathe Chuck.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States The 3 jaw lathe chuck is suitable for a variety of general-purpose lathes, economical CNC lathes, grinding machines, milling machines, drilling machines, ... moreand machine tool accessories. This mini lathe chuck is composed of a chuck body, a movable chuck, and a claw drive.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States This versatile chuck is made of high-quality hardened steel, compressionresistance and has a long service life. It has two-way jaws to hold industrial ... moreparts in the size range 0.16" / 4 mm - 7.87" / 200 mm.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Lathe, economical CNC lathes, grinding machines, milling machines, drilling and machine accessories etc. Lathe Chuck Type: Miniature Lathe Chuck. Application: ... morefor CNC Drilling Milling Machine. Jaw: 3 Jaw （Two Pcs Tongue And Groove Reversible Hardened Top & Bottom Jaws.
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States SHARS 3" 4 Jaw Independent Precision Lathe Chuck + 5C Arbor Adapter Mount NEW 202-5446. Diameter: 3" Arbor Mounting: 5C, Chuck Center Hole: ... more0.866" Chuck Body Thickness: 1.653" Runout: 0.003" Inside Jaw Clamping Range: 0.197" 1.378" Outside Jaw Clamping Range: 1.378- 3.150" 5c arbor allow to use in headstock to replace typical lathe chuck for more rigid clamping in small part application, Accuracy is maintained for the entire clamping range Semi-steel chuck body made from high quality cast iron, 4 pinion design with each pinion ground and hardened to HRC 43, Both side of jaw teeth and guides are ground and hardened to HRC 58-62, Each set of jaws are serialized in their own set, A serialized set of jaws are then finished. Ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy, Before assembling the jaw to its designated chuck body. The jaw's finish machining are performed on a closed tolerance state of the art CNC machine from Japan Scroll plate's thread flank are ground on both side to achieve a tighter contact with the master jaw, Each chuck has gone through rigorous accuracy and repeatability inspection with clamping and jamming multiple random testing rods or rings, One set reversible jaw for internal clamping and external clamping Lathe Chuck Key, We have other chucks& back plates available at: Related products Semi-Machined 4' 1-8 Threaded Back Plates p/n: 202-6229 US $25.95 Email: DISCOUNTMACHINE@AOL.COM click here to visit my Ebay store now SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States 8" Lathe Chuck3 Jaw. The 3 jaw lathe chuck is suitable for a variety of general-purpose lathes, economical CNC lathes, grinding machines, milling machines, ... moredrilling machines, and machine tool accessories.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States N45 Magnet & 4960lb Capacity. N45 Magnet. Excellent Magnetic Force: We used N45 Magnet to provide super strong magnetism for you. Magnetic Force: ≥100 ... moreN/cm². Max Weight Capacity:4,960 lb s. Max Pulling Power: 9,920 lbs.
Buy It Now
Free Shipping Condition: New Location: Fullerton, United States Dental Brushless Electric Micro Motor NSK style. Type of motor: brushless motor. Dental 1:5 Fiber Optic increase Contra Angle Handpiece. Dental 1:5 increasing ... moreContra Angle Handpiece. Handpiece ： 1PC/Box.
Buy It Now
Free Shipping Condition: New Location: Gresham, United States Dental NSK Style Brushless LED Electric Micro Motor /1:5 Increasing Handpiece USA. Type of motor: brushless motor. Dental 1:5 Increasing Fiber Optic Contra ... moreAngle Compatible with E-type Electric Motor;.
Buy It Now
$15.50 Shipping Condition: New Location: Saint Charles, United States SHARS 3" 3 JAW SELF CENTERING LATHE CHUCK 2MT ARBOR SHANK TAPER MOUNT TIR.003 NEW Each high quality chuck comes with a certification that documents ... moreTIR 202-5417. Size: 3" Shank MT2 Arbor, Clamping Range: 0.179~3.15" TIR: 0.003" Chuck is self-centering, Runout is.001" with Scroll type, One set ID Jaws, One set OD Jaw, Lathe chuck key, Note: The pictures above show as the 5C Shank. For 202-5417 should be 2MT shank. Each high quality chuck comes with a certification that documents TIR We have other chucks& back plates available at: If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone:1-630-443-3244 Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13e666c9779-0xf6-
Buy It Now
Free Shipping Condition: New Location: New Egypt, United States 1"x8TPI Thread & 3/4"x16TPI Adapter. 4-Jaw Self-Centering Chuck for Wood Lathe. Upgrade your wood lathe experience with our 4-Jaw Self-Centering Chuck. ... moreWith a wide range of workpiece sizes supported, precision machined construction, and high-grade steel durability, this chuck is perfect for all your wood lathe projects.
Buy It Now
$42.00 Shipping Condition: New Location: Saint Charles, United States Both side of jaw teeth and guides are ground and hardened to HRC 58-62. 6 piece of mounting screws for the lathe chuck back plate. Semi-steel chuck body ... moremade from high quality cast iron. Chuck Thickness 3.122.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Size: 130 mm (5.1") Outside Diameter: 130 mm (5.1") Bolt Circle Diameter: 115 mm (4.25") Center Thru Hole Diameter: 30 mm (1.18") Chuck ... moreBody Thickness: 60 mm (2.28") Internal Jaw Clamping Range (A-A1): 3-40 mm (0.12"-1.58") Internal Jaw Jamming Range (B-B1): 40-130 mm (1.58"-5.12") External Jaw Clamping Range (C-C1): 40-120 mm (1.58"-4.7") Mounting Thread: 3-M8 Accuracy: 0.002" Features： MAIN PARAMETER - 3 jaw self-centering design lathe chuck. Diameter: 130 mm (5.1").
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Material: steel Model: 6'' Features: 1. Improve the accuracy of roundness, center of the circle, cylinder degree, etc. The oil pressure ... moreraw claw does not produce bell mouth shape and centrifugal vibration, and has good control effect on the oil pressure claw forming ring. 2. Both the outer clamp and the inner clamp can be used. The hydraulic pressure claw can be adjusted according to the required size, which is convenient and quick to operate, saving time and effort. 3. The old chuck can effectively improve the precision and grip when using the forming ring. Packing including： 1*Jaw Boring Ring.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: Material: steel Model: 6'' Features: 1. Improve the accuracy of roundness, center of the circle, cylinder degree, etc. The oil pressure ... moreraw claw does not produce bell mouth shape and centrifugal vibration, and has good control effect on the oil pressure claw forming ring. 2. Both the outer clamp and the inner clamp can be used. The hydraulic pressure claw can be adjusted according to the required size, which is convenient and quick to operate, saving time and effort. 3. The old chuck can effectively improve the precision and grip when using the forming ring. Packing including： 1*Jaw Boring Ring.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States You may ask for freight cost before buying tools. Heavy duty construction.
Buy It Now
Condition: New Location: Saint Charles, United States TIR Repeatability.0005". Both side of jaw teeth and guides are ground and hardened to HRC 58-62. 6 piece of mounting screws for the lathe chuck back plate. ... moreSemi-steel chuck body made from high quality cast iron.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application It is suitable for machine tools and accessories such as ordinary lathes, economical CNC lathes, grinding machines, milling machines, drilling ... moremachines and machine tool accessories. Specification Color: Black Compatible Devices: Lathe(Not Included) Included Components: 1 Item Model Number: 3 Jaw Material: 42crmo Alloy Steel Process: High-temperature Quenching and Tempering, CNC High-precision Machining, Grinding, Blackening Treatment Hardness: 45-55HRC Precision of Claw Trimmer Body: 0.005 Gross Weight: 2.4kg/5.3lbs Inner Diameter: 115mm/4.5in Outer Diameter: 218mm/8in Package Size: 23*22.5*2.8cm/9*8.9*1.1in Package Included 1*8 inch Hydraulic Three Jaw Chuck .
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 10" HARD JAWS. Lathe Chuck Size: 10". Jaw Mounting Type: 1.5mm x 60 Degree Serration. Jaw Height: 2.126". Jaw Width: 1.575". Jaw Length: 3.976". one set ... moreof hard jaw. Hole Space: 1.181" / 30mm.
Buy It Now
Free Shipping Condition: New Location: United States VEVOR CAT40 Collet Chuck CNC Keyless Drill Chuck 1/2" for HAAS CAT40 APU13. VEVOR 4pcs CAT40 ER16 4" Collet Chuck G2.5 100mm Tool Holder Balanced 20000RPM. ... moreHigh Performance ER32 Spring Collet: All critical collet surfaces are precision ground for an accurate fit.
Buy It Now
$15.50 Shipping Condition: New Location: Saint Charles, United States 5" X 2" X 2" PRECISION MAGNETIC V BLOCKS VBLOCK CHUCK.0005" NEW Notes: No return allowed! 202-6004. Length: 5" Width: 2" ... moreHeight: 2" Precision ground flat. Square, and parallel to accuracy.0005" Top. Bottom, and end magnetize simultaneously. On/off switch, We have other magnetic blocks& holders available at: All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Email: DISCOUNTMACHINE@AOL.COM PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at DISCOUNTMACHINE@AOL.COM
Buy It Now
Free Shipping Condition: New Location: United States Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features ... moreof high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and other processing. 6x6, 6x12", 6x18". Fine Pole Magnetic Chuck ... moreMachining Workholding Positioning. --Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is particularly evident.
Buy It Now
Free Shipping Condition: New Location: Fullerton, United States LED Brushless Electric Motor High performance brushless motor with greater torque and lower noise. Type of motor: brushless motor. Compatible with E-type ... morehandpieces for surgical, low speed, endo, and a variety of other dental applications.
Buy It Now
Free Shipping Condition: New Location: Fullerton, United States Type of motor: brushless motor. Dental 1:5 Increasing Ratio Low Speed Contra Angle Internal Handpiece. Handpiece：1PC/Box. 1：1 Low Speed Contra Angle Internal ... moreHandpiece. Dental 1:5 Increasing Contra Angle Compatible with E-type Electric Motor.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application It is suitable for machine tools and accessories such as ordinary lathes, economical CNC lathes, grinding machines, milling machines, drilling ... moremachines and machine tool accessories. Specification Color: Black Compatible Devices: Lathe(Not Included) Included Components: 1 Item Model Number: 3 Jaw Material: 42crmo Alloy Steel Process: High-temperature Quenching and Tempering, CNC High-precision Machining, Grinding, Blackening Treatment Hardness: 45-55HRC Precision of Claw Trimmer Body: 0.005 Gross Weight: 2.4kg/5.3lbs Inner Diameter: 115mm/4.5in Outer Diameter: 218mm/8in Package Size: 23*22.5*2.8cm/9*8.9*1.1in Package Included 1*8 inch Hydraulic Three Jaw Chuck .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications: l Color: Silver l Material: High speed steel&40CR l Size: 48x100mm/1.89"x3.94" l Weight: 870g l Accuracy: 0.005 in l HRC: 45-50 Highlights: ... morel 100% Brand new high quality. l Made of high quality high speed steel and 40CR ,quenching hardness is 45-50HRc. l Mount to your choice of backplate to use on a lathe. l Can also be used as a fixture on a milling table. l Concentricity is 0002". Package include: 1 x 100MM Diameter ER-32 Collect Chuck Note: l The real item is a little color difference from the picture. l Please allow 2-5mm for manual measurance.
Buy It Now
$9.00 Shipping Condition: New Location: La Puente, United States ★Applicable to 8" Lathe Chucks, Precision Quality Serrated (1.5 Mm X 60) Hard Jaws (Double Step). ★ Claw Size: 87 X 35 X 51mm, Groove Width: 14mm, Hole ... moreSpacing: 25mm. Ideal for 8" Lathe Chucks. 3 X Hard Chuck Jaw.
Buy It Now
$28.06 Shipping Condition: New Location: Saint Charles, United States R8 drive slot is precision mill finished to give a tight fit into the R8 spindle. 1pc of R8 ER40 Collet chuck. COLLET CHUCK STYLEStandard. COLLET SERIESER40. ... moreCollet range is. 040" due to revolutionary "X-tra Flex Design".
Buy It Now
$26.57 Shipping Condition: New Location: Saint Charles, United States SHARS 12" Jaw BORING RING Kitagawa B212 CNC LATHE CHUCK SOFT TOP JAWS BORE NEW 202-6254. Chuck Size: 12" Ring Inside diameter: 7.40" Ring ... moreOutside diameter: 12.4" Pin Diameter: 0.96" Designed to fit 12" size Kitagawa B212 type or similar CNC power chucks and manual chucks in soft jaw machining 3 independently adjustable pins fit into soft jaw's counterbore to allow for even pressure clamping on each. Eliminating jaw lifting, Without discs or bungs used to clamp jaws. Through boring of jaw is possible, Boring ring will give you better concentricity and a truer soft jaw bore, We have more CHUCK JAW available: We have more 3 Jaw or 6 Jaw LATHE CHUCKS available: All Available to Ship NOW! Fixed Prices at our eB ay store! Please direct any questions to our eBay Message Box. PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box:`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3A%60%3E-146c3eb7b35-0x102-
Buy It Now
$23.00 Shipping Condition: New Location: Saint Charles, United States Shars Precision ER40 5" "SET TRU" Collet Chuck CNC W/Fine Adjust. 0005" TIR New. ER40 1/8” ~ 1”. Compatible with standard ER40 collet which has a range ... moreof 1/8" to 1". Back plate can be mounted onto ER40 Collet Chuck.
Buy It Now
$20.00 Shipping Condition: New Location: Dayton, United States Mainly used in laser marking machine, laser welding machine, laser engraving machine. You can also mark: cigarette holder, pen. Laser marking machine, ... moreengraving rotary shaft, large through hole, fast loading and unloading, improve efficiency.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States ISO E type, fit ISO E type dental implant motor (W/H KAVO NSK COXO ect.). Implant Surgical Handpiece. For dental implant motor. 20:1 Contra Angle. ISO ... moreE type, fit ISO E type dental implant motor W&H KAVO NSK COXO ect.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States The clearance between adapter boss OD and the chuck counterbore ID should be from 0.0078" to 0.0129". The gap between the adapter boss and the bottom ... moreof the counterbore should be around 0.0787". LATHE CHUCK CATEGORYBack Plates Threaded Mounting.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ★Applicable to 8" Lathe Chucks, Precision Quality Serrated (1.5 Mm X 60) Hard Jaws (Double Step). ★ Claw Size: 87 X 35 X 51mm, Groove Width: 14mm, Hole ... moreSpacing: 25mm. Ideal for 8" Lathe Chucks. 3 X Hard Chuck Jaw.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States Internal clamping ring's shape is design to minimize out-of-balance compare to the standard off-center o-ring design from other standard ER collet nut, ... moreachieving 12,000 RPM without needed to drill holes on the collet nut body when placed on a dynamic balanced machine to preserve ER collet nut's body strength.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications: l Color: Silver l Material: High speed steel&40CR l Size: 48x100mm/1.89"x3.94" l Weight: 870g l Accuracy: 0.005 in l HRC: 45-50 Features: ... morel 100% Brand new high quality. l Made of high quality high speed steel and 40CR ,quenching hardness is 45-50HRc. l Mount to your choice of backplate to use on a lathe. l Can also be used as a fixture on a milling table. l Concentricity is 0002". Package include: 1 x 100MM Diameter ER-32 Collect Chuck Note: l The real item is a little color difference from the picture. l Please allow 2-5mm for manual measurance.
Buy It Now
$6.70 Shipping Condition: New Location: Saint Charles, United States ER16 ER 16 COLLET HEX NUT FOR COLLETS CHUCK CNC MILLING. Collet Size: ER-16. Wrench Style: A-Hex. Open: 25mm. Thick material allows high torque without ... morebending. You may ask for freight cost before buying tools.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States SHARS ER16 3/4" ER Collet Holder with Straight Shank OAL 3.35" NEW. COLLET SERIES ER16. Nickel plated ER collet nut will extending the collet nut life. ... moreTOOL HOLDER CATEGORY Collet Chuck. COLLET CHUCK STYLE Standard.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States ER40 ER-40 COLLET NUT FOR COLLETS CHUCK CNC MILLING. Collet Size: ER-40. Wrench Style: E. Thick material allows high torque without bending. Made from ... morealloy steel, precision cut from EDM machine. You may ask for freight cost before buying tools.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ★Applicable to 10" Lathe Chucks, Precision Quality Serrated (1.5 Mm X 60) Hard Jaws (Double Step). ★ Claw Size: 101 X 40 X 54mm, Groove Width: 16mm, Hole ... moreSpacing: 30mm. Ideal for 10" Lathe Chucks. ★ Our 10" Hard Chuck Jacket Consists of 3 Pieces Made of Precision High-quality Steel for Precise Performance.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Multiple Collet Sizes:12pcs ER32 collets set by 16th:1/8" ;3/16" ; 7/32" ; 1/4" ; 5/16" ; 3/8" ; 7/16" ; 1/2" ; 9/16" ; 5/8"; 11/16"; 3/4" ;10pcs ER16 ... morecollets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8".
Buy It Now
Free Shipping Condition: New Location: Westbury, United States CAT 40 Tooling Kit for Haas Fadal CNC Mill-ER Chuck Collet Holder ER32/16 Tap. 【Great Accuracy & Speed:】CAT40 collet chuck accuracy in Tenth. Collet Set: ... moreT.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications: l Color: Silver l Material: High speed steel&40CR l Size: 48x100mm/1.89"x3.94" l Weight: 870g l Accuracy: 0.005 in l HRC: 45-50 Features: ... morel 100% Brand new high quality. l Made of high quality high speed steel and 40CR ,quenching hardness is 45-50HRc. l Mount to your choice of backplate to use on a lathe. l Can also be used as a fixture on a milling table. l Concentricity is 0002". Package include: 1 x 100MM Diameter ER-32 Collect Chuck Note: l The real item is a little color difference from the picture. l Please allow 2-5mm for manual measurance.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: ER-32 Collet Block Brand new Model: ER32 Material: hard steel Color: silver & black Size: approx. 41*69mm/1.6*2.7in ER-32 Square Collet ... moreBlock Model: ER32 Material: hard steel Color: silver & black Size: approx.45*70mm/1.7*2.7in.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features 13 Pcs of R8 collets set Sizes : 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16, and 7/8" Made of high grade tool ... moresteel Hardened and precision ground TIR 0.0006" All collets have 7/16" - 20 drawbar thread Good performance and long use time. Durable and of practical use Packaged in a plastic case individually Brand Thomletha MPN GM396280 UPC Does not apply.
Buy It Now
$9.70 Shipping Condition: New Location: Saint Charles, United States Parallel, square or hex shapes as well as for cross hole drilling at 60º, 90º,120º. Level Operated closer. 2 nut closers. A simple and effective short ... morerun jig to machine. You may ask for freight cost before buying tools.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Block body is preicision ground to 0.0007" flatness, 0.0015" squareness, and 0.001" parallelism. Use standard ER collet. For parallel, square or hex shape ... moreas well as for cross hole dirlling at 60, 90, or 120 degrees.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 5: These ER16A nuts collet clamping nut are used for ER CNC milling chuck holder lathe. 4: Suitable for ER-type engraving machine, spindle machine, extension ... morerod, locking collet. 5 X ER16-A Type Collet.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Packing Included: 1 x MT3 ER32 M12 Collet Chuck 1 x Spanner 15 x ER32 Spring Collet Set 1x Storage box Specifications: MT3 ER32 M12 Collet Chuck Material: ... moreMetal Size: 138cm Spindle Drawbar thread : M12*1.75 ER32 clamping range :1-20mm Spanner:212mm Suitable For: MT3 ER32 M12 dedicated machine ER32 Spring Collet Set Material:high grade spring steel Color:steel color Type:ER32 Length:40mm Diameter:32mm Inner diameter: 3mm-20mm Features: -This is a "brand new" precision collet chuck holder for professionals and hobbyists demanding. -Available in the BT ER extension rod handle, can be used for clamping drill, milling cutter, straight shank tool. -Collet must be assembled into the clamping nut before inserting into the chuck.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ER40 Collet 15 Pcs Set R8 Shank Tools fit for Milling Machine, Lathe, Drilling. 1 x R8 Shank ER40 Collet Chuck. 1 x ER40 Spanner. High Precision Collet ... moreChuck System Suitable For All Milling And Drilling Applications.
Buy It Now
$17.49 Shipping Condition: New Location: Gresham, United States • Push Button Chuck. • Clean Head System. • Standard Head. Head Size: ø10.3 x H13.5 mm. Speed: 380,000~480,000 min-1. •Power Performance Reliability. ... more• Single Spray. FDA for Curing Light: 510(K) Number: K192233, Regulation Number: 21 CFR 872.6070, Product Code: EBZ.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Engravings on round objects are always demanding, but this OMTech Rotary Axis has the capabilities to help you get the job done right. This compact rotary ... moreaxis can easily work with all 50 Watts and above OMTech CO2 Laser engravers to mark your curved surfaces.
|
|
|
|
Mori Seiki SL-3B CNC Turning Center 10.00" Hydraulic Chuck
MORI SEIKI SL-3B CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 1981 SWING OVER BED/ CROSS SLIDE 22.4" 13.8" MAX. CUTTING DIAMETER(CHUCKING) 10.2" MAXIMUM TURNING LENGTH 22.0" DISTANCE BETWEEN CENTERS 24.0" X AXIS TRAVEL 6.3" Z AXIS TRAVEL 22.0" RAPID TRAVERSE X AXIS 196.9 IPM RAPID TRAVERSE Z AXIS 315 IPM SPINDLE NOSE A2-6 SPINDLE SPEEDS 30- 3000 RPM SPINDLE BORE 2.36" SPINDLE MOTOR 20 HP TURRET CAPACITY 10 STATIONS TAILSTOCK QUILL STROKE 3.1" TAILSTOCK QUILL DIAMETER 3.35" TAILSTOCK BODY STROKE 21.0" TAILSTOCK TAPER MT#3 APPROX. DIMENSIONS 112" x 67" x 75" APPROX. WEIGHT 9.500 LBS EQUIPPED WITH: YASNAC 2000GII CNC CONTROL WITH 6" CRT SCREEN 10" 3-JAW HYDRAULIC CHUCK. TOOL PRESETTER RIGHT SIDE DISCHARGE LIFT-UP TYPE CHIP CONVEYOR STANDARD COOLANT ... moreSYSTEM WITH TANK& PUMP FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE TOOL HOLDERS. ALL AVAILABLE MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI JUST OFF I-94 AT HWY 142. AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions or need assistance with shipping. Please call me at 262-854-5054
|
|
|
Haas SL-20T CNC Turning Center Rigid Tap Presetter Tailstock 8.00" Chuck
HAAS SL-20T CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 2000 SWING OVER FRONT APRON 23" SWING OVER CROSS SLIDE 9.5" DISTANCE BETWEEN CENTERS 20" X AXIS TRAVEL 8.45" Z AXIS TRAVEL 20" RAPID TRAVERSE RATE X AXIS 590 IPM RAPID TRAVERSE RATE Z AXIS 708 IPM SPINDLE SPEEDS 40- 4.000 RPM SPINDLE NOSE A2-6 SPINDLE BORE 3.00" DRAW TUBE BORE 2.06" SPINDLE MOTOR 20 HP TURRET CAPACITY 10 STATIONS TAILSTOCK TAPER MT#4 TAILSTOCK TRAVEL 20" APPROX. DIMENSIONS 127" x 75" x 74" MACHINE WEIGHT(APPROX) 9.000 LBS EQUIPPED WITH: HAAS 32-BIT CNC CONTROL WITH 14" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION RIGID TAPPING(SYCHRONOUS TAPPING) USB UPGRADE 8" 3-JAW HYDRAULIC CHUCK. SPINDLE ORIENTATION PARTS CATCHER. TOOL PRE-SETTER, CUSTOM MACROS 1 MB ME MOR Y UPGRADE. BARFEED ... moreINTERFACE ONLY HYDRAULIC FULLY PROGRAMMABLE TAILSTOCK CHIP REMOVAL AUGER. QUICK CODE PROGRAMMING STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE TURRET TOOLING& MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER IN KENOSHA, WISCONSIN LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT.
|
|
|
Kent KLS-1840N CNC Lathe 10.00" Chuck 40" Centers
KENT KLS-1840N CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 2012 SWING OVER BED 18" SWING OVER CROSS SLIDE 9.84" DISTANCE BETWEEN CENTERS 39" X AXIS TRAVEL 10" Z AXIS TRAVEL 39.4" RAPID TRAVERSE RATE Z/X AXES 240/120 IPM SPINDLE NOSE D1-6 SPINDLE SPEEDS 45-1.800 RPM SPNDLE BORE 3" SPINDLE MOTOR 7.5 HP TURRET CAPACITY 8 STATIONS TAILSTOCK TAPER MT#5 TAILSTOCK QUILL TRAVEL 5" APPROX. DIMENSIONS 100 X 55 X 70" MACHINE WEIGHT(APPROX) 5.300 LBS POWER REQUIREMENTS 220V/3P/5 KVA EQUIPPED WITH: FANUC Oi-TB CNC CONTROL WITH 14" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 10" CHUCK. HARDENED AND GROUND WAYS 8 STATION PROGRAMMABLE TOOL TURRET AUTO LUBE WITH METERED CHECK VALVES ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. ... moreAS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and we'll be happy to help. Buyer to verify all specifications and options prior to purchase. Buyer responsible for shipping charges to end destinatio
|
|
|
Haas HL2-T CNC Lathe Turning Center Rigid Tap Presetter Tailstock 8.00" Chuck
1998 HAAS HL-2 CNC TURNING CENTER This is a very nice well cared for lathe with low hours in motion time: 4499 hours spindle hours: 5024 Equipped with: Rigid tapping Custom Macro programming Tool Presetter/Probe Programmable Tailstock Parts catcher Coolant tank with chip auger Kitagawa b208 8" hydraulic chuck Lots of tooling with the machine as well: 9 inside diameter toolholder blocks(450.00 each from haas) 4 turning and facing holder(450.00 each from haas) 2 special long length turning holders. These were designed and manufactured in house, allows tools to be mounted behind the turret, toolchange capable) allowing for turning 22" length part from chuck jaws face to tailstock center! SEE PICS) machine geometery alignment performed 12/2013. Machine is under power and can be inspected by appointment. Call steve@ 330-351-2two2four ... moreWe have indicators in house to verify our claims that the machine turret to spindle alignment is dead on. Backlash etc are all perfect. PAYMENT BY CERTIFIED CHECK OR BANK WIRE TRANSFER. MACHINE IS UNDER POWER IN OUR SHOP FOR INSPECTION. UPON WINNING THIS AUCTION. AND AFTER DEPOSIT IS RECIEVED, WE HAVE TO RENT A TOWMOTOR TO RIG THE MACHINE OUT OF OUR SHOP. WE WILL DELIVER THE MACHINE LOCALLY(YOU MUST HAVE RIGGERS TO UNLOAD FROM OUR TRAILER. OR- WE WILL DELIVER THE MACHINE TO GRG TRUCKING. IN CLEVELAND OHIO. FROM THERE YOU CAN HAVE THE LATHE SHIPPED TO YOUR AREA. YOU CAN NOT UNDER ANY CIRCUMSTANCES HAVE RIGGERS PICK THE MACHINE UP DIRECTLY FROM OUR SHOP. IT MUST BE PICKED UP FROM GRG TRUCKING. PLEASE CALCULATE YOU FREIGHT AND RIGGING COSTS FROM GRG TRUCKING'S LOCATION, CLEVELAND OHIO.
|
|
|
Hardinge Cobra 51 CNC Lathe 6.00" Chuck Hydraulic Tailstock
HARDINGE COBRA 51 CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUF ACTU RE 2001 MAXIMUM SWING 21" MAXIMUM TURNING DIAMETER 8.25" MAXIMUM TURNING LENGTH 14" X AXIS TRAVEL 7.75" Z AXIS TRAVEL 14.0" RAPID TRAVERSE RATE X AXIS 472 IPM RAPID TRAVERSE RATE Z AXIS 787 IPM SPINDLE NOSE A2-6 MAX. BAR CAPACITY 2" SPINDLE SPEEDS 50- 4.500 RPM SPINDLE MOTOR 20 HP TURRET CAPACITY 12 STATIONS TAILSTOCK QUILL TAPER MT#3 TAILSTOCK QUILL STROKE 3.93" APPROX. DIMENSIONS 93" x 68" x 67" MACHINE WEIGHT(APPROX) 8.000 LBS EQUIPPED WITH: GE FANUC 21iT CNC CONTROL WITH 9" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 6" 3-JAW HYDRAULIC THROUGH HOLE CHUCK W/JAWS ALL AVAILABLE TURNING TOOL BLOCK HOLDERS& WEDGES STANDARD COOLANT SYSTEM. ALL AVAILABLE MANUALS AS THIS ITEM IS LISTED ON SEVERAL ... moreOTHER SITES IT IS SUBJECT TO PRIOR SALE ON OUR WAREHOUSE FLOOR IN KENOSHA. WISCONSIN ZIP CODE 53144. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and we'll be happy to help. Buyer to verify all specifications and options prior to purchase. Buyer responsible for shipping charges to end destina
|
|
|
Hitachi Seiki 5NF-800 CNC Turning Center 15.00" Chuck Tailstock
HITACHI SEIKI 5NF-800 CNC TURNING CENTER GENERAL SPECIFICATIONS: INSTALLED NEW 1984 MAXIMUM SWING 26.75" MAXIMUM CUTTING LENGTH 31.5" X AXIS TRAVEL 11.5" Z AXIS TRAVEL 32.25" RAPID TRAVERSE RATE X AXIS 200 IPM RAPID TRAVERSE RATE Z AXIS 400 IPM SPINDLE SPEEDS 20- 1800 RPM SPINDLE MOTOR 42 HP SPINDLE NOSE A2-11 SPINDLE BORE 5.03" BAR CAPACITY 4.0" TURRET CAPACITY 10 STATIONS TAILSTOCK TAPER MT#4 TAILSTOCK QUILL TRAVEL 4.0" TAILSTOCK QUILL DIAMETER 4.5" APPROX. DIMENSIONS 165" x 92" x 96" MACHINE WEIGHT(APPROX) 16.000 LBS EQUIPPED WITH: FANUC 6TB CNC CONTROL WITH 9" MONOCHROME CRT RS-232C PORT INTERFACE FOR DNC OPERATION 15" HYDRAULIC THROUGH HOLE CHUCK WITH JAWS SPINDLE LOAD METER.SPINDLE SPEED METER HYDRAULIC TAILSTOCK W/PROGRAMMABLE QUILL RIGHT SIDE DISCHARGE LIFT-UP TYPE CHIP ... moreCONVEYOR STANDARD COOLANT SYSTEM WITH TANK AND PUMP ALL AVAILABLE TOOL HOLDERS& MACHINE MANUALS AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE ON OUR WAREHOUSE FLOOR IN KENOSHA. WISCONSIN ZIP CODE 53144. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. CALL OR EMAIL US YOUR ZIP CODE IF YOU WOULD LIKE A SHIPPING RATE. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can em
|
|
|
Haas SL-30T CNC Turning Center Rigid Tap Gear BoxTailstock 10.00" Chuck
HAAS SL-30T CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 5/2006 SWNG OVER FRONT APRON 30" SWING OVER CROSS SLIDE 14.5" DISTANCE BETWEEN CENTERS 39" X AXIS TRAVEL 11.3" Z AXIS TRAVEL 34" RAPID TRAVERSE RATE ALL AXES 710 IPM SPINDLE NOSE A2-8 SPINDLE SPEEDS 3400 RPM SPNDLE BORE 3.5" MAX. BAR CAPACITY 3.0" SPINDLE MOTOR 30 HP TURRET CAPACITY 12 STATIONS TAILSTOCK TAPER MT#4 TAILSTOCK STROKE 33.5" APPROX. DIMENSIONS 147" x 77" x 75" MACHINE WEIGHT(APPROX) 16.000 LBS EQUIPPED WITH: HAAS 32-BIT CNC CONTROL WITH 14" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 10" 3-JAW HYDRAULIC THROUGH HOLE CHUCK RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) 1MB. MEMORY, HIGH INTENSITY LIGHTING HYDRAULIC FULLY PROGRAMMABLE TAILSTOCK FLOPPY DISK DRIVE, GEAR BOX. RIGHT SIDE DISCHARGE ... moreLINK BELT TYPE CHIP CONVEYOR FULLY ENCLOSED SPLASH GUARDING. ALL AVAILABLE TURRET TOOLING& MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE. PLEASE PROVIDE US WITH YOUR ZIP CODE. AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions o
|
|
|
Daewoo Puma 400B CNC Turning Center 18.00" Chuck Chip Conveyor Tool Pre-Setter
DAEWOO PUMA 400B CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 12/2000 SWING OVER BED 28" SWING OVER CARRIAGE 18.9" DISTANCE BETWEEN CENTERS 44.7" X AXIS TRAVEL 14.3" Z AXIS TRAVEL 43.5" RAPID TRAVERSE RATE X/Z AXES 630/790 IPM SPINDLE SPEEDS 2000 RPM SPINDLE BORE 5.2" BAR CAPACITY 4.62" SPINDLE MOTOR 50 HP TURRET CAPACITY 10 POSITIONS TAILSTOCK TAPER MT#5 TAILSTOCK STROKE 39.4" APPROX. DIMENSIONS 201" x 94" x 80" MACHINE WEIGHT(APPROX) 20.000 LBS EQUIPPED WITH: FANUC 181T CNC CONTROL WITH 10" LCD SCREEN RS-232 PORT FOR DNC OPERATION 18.00" KITAGAWA 3-JAW CHUCK. CHIP CONVEYOR TWO-SPEED GEARBOX. PROGRAMMABLE TAILSTOCK FULLY ENCLOSED SPLASH GUARDING ALL AVAILABLE MANUALS AND TOOLING ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS ... moreLATHE UNDER POWER IN KENOSHA, WISCONSIN LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and we'll be happy to help. Buyer to verify all specifications and options prior to purch
|
|
|
Haas SL-10T CNC Turning Center 6.00" Chuck Tailstock Floppy
HAAS SL-10T CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 05/2007 SWING OVER FRONT APRON 16.25" SWING OVER CROSS SLIDE 8" DISTANCE BETWEEN CENTERS 16.5" X AXIS TRAVEL 6.25" Z AXIS TRAVEL 14" RAPID TRAVERSE RATE ALL AXES 1200 IPM SPINDLE NOSE A2-5 SPINDLE SPEED 6.000 RPM SPNDLE BORE 2.31" MAX. BAR CAPACITY 1.75" SPINDLE MOTOR 15 HP TURRET CAPACITY 12 STATIONS TAILSTOCK TAPER MT#3 TAILSTOCK STROKE 13.75" APPROX. DIMENSIONS 102" x 55" x 70" MACHINE WEIGHT(APPROX) 5.500 LBS EQUIPPED WITH: HAAS 32-BIT CNC CONTROL WITH 14" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 6" 3-JAW HYDRAULIC THROUGH HOLE CHUCK W/JAWS HYDRAULIC FULLY PROGRAMMABLE TAILSTOCK 3.5" 1.44MB FLOPPY DISK DRIVE. BOLT ON TURRET FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE TURRET ... moreTOOLING& MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR. LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE. PLEASE PROVIDE US WITH YOUR ZIP CODE. AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email yo
|
|
|
Hitachi Seiki Hitec Turn 25S CNC Turning Center 10.00" Chuck Tailstock
HITACHI SEIKI HITEC-TURN 25S CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE/INSTALLED 11/1986/ 1987 SWING OVER BED 20" MAX. CUTTING LENGTH 24" X AXIS TRAVEL 9.3" Z AXIS TRAVEL 24.4" RAPID TRAVERSE X AXIS 472 IPM RAPID TRAVERSE Z AXIS 590 IPM SPINDLE SPEEDS 20-3.600 RPM SPINDLE MOTOR 25 HP SPINDLE NOSE A2-8 SPINDLE BORE 2.75" MAX. BAR CAPACITY 2.5" TURRET CAPACITY 10 STATIONS TAILSTOCK TAPER MT# 5 TAILSTOCK QUILL TRAVEL 3.93" TAILSTOCK QUILL DIAMETER 3.54" APPROX. DIMENSIONS 130" x 83" x 88" APPROX. WEIGHT 10.000 LBS EQUIPPED WITH: SEICOS CNC CONTROL WITH 10" CRT SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 10" 3-JAW HYDRAULIC THROUGH HOLE CHUCK EXTRA 10" SMW B250BH 4 JAW HYDRAULIC CHUCK HYDRAULIC TAILSTOCK W/PROGRAMMABLE QUILL TOOL PRE-SETTER. SPINDLE ... moreLOAD METER FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE TURRET TOOLING& MANUALS ON OUR WAREHOUSE FLOOR IN KENOSHA. WISCONSIN ZIP CODE 53144. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER ON OUR FLOOR PRIOR TO AUCTION END. PREPPED AND LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. PAYMENT IN FULL VIA US BANK WIRE PRIOR TO LOADING. BUYER PAYS FOR SHIPPING. CALL OR EMAIL US YOUR ZIP CODE IF YOU WOULD LIKE A SHIPPING RATE. SEE OUR EABY STORE FOR OTHER METALWORKING EQUIPMENT. TOOLING, MANUALS AND CNC MACHINES. THANKS FOR LOOKING You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. If you have any further questions or need assistance with shipping. Please call me at 262-854-5054 or you can email your questions to ebay@meridianmachinery.com and we'
|
|
|
Haas SL-40TL Long Bed CNC Turning Center Presetter Tailstock 15.00" Chuck
HAAS SL-40LT CNC TURNING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 05/2004 SWING OVER FRONT APRON 40" SWING OVER CROSS SLIDE 25" DISTANCE BETWEEN CENTERS 89" MAXIMUM CUTTING LENGTH 80" X AXIS TRAVEL 17" Z AXIS TRAVEL 80" RAPID TRAVERSE X AXIS 710 IPM RAPID TRAVERSE Z AXIS 320 IPM SPINDLE SPEEDS(2 SPEED GEARED) 2400 RPM SPINDLE NOSE A2-8 SPINDLE BORE 4.63" MAXIMUM BAR CAPACITY 4.0" SPINDLE MOTOR 40 HP TURRET CAPACITY 10 STATION TAILSTOCK TAPER MT#5 TAILSTOCK THRUST(MAX) 4500 LBS APPROX. DIMENSION 234" x 124" x 89" MACHINE WEIGHT 32.000 LBS EQUIPPED WITH: HAAS 32-BIT CNC CONTROL WITH 15" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION 15" 3-JAW HYDRAULIC THROUGH HOLE CHUCK TOOL EYE/ TOOL PRESETTER. CHIP REMOVAL AUGER EXTENDED TOOL POCKET FOR 33" LONG BORING BARS ... moreRIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) HIGH INTENSITY LIGHTING. FLOPPY DISK DRIVE STEADY REST PROVISION(NO STEADY REST INCLUDED) REMOTE JOG HANDLE(REMOTE PULSE GENERATOR) HYDRAULIC FULLY PROGRAMMABLE TAILSTOCK STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE TURRET TOOLING& MANUALS ON OUR WAREHOUSE FLOOR UNDER POWER IN KENOSHA. WI. YOU ARE WELCOME TO SEE THIS LATHE UNDER POWER IN KENOSHA, WISCONSIN LOADED ON YOUR TRUCK AT NO ADDITIONAL CHARGE. CALL OR EMAIL FOR A SHIPPING QUOTE AS THIS ITEM IS LISTED ON SEVERAL OTHER SITES IT IS SUBJECT TO PRIOR SALE eBay Purchase Conditions- You are responsible for reading the full item listing. Including any instructions the seller provides, before making a bid or commitment to buy. Unless otherwise stated, by making a bid or commitment to buy an item on eBay, you are committing to buy the item from the seller listing the item. If you make a commitment to buy or your bid is the winning bid or is otherwise accepted, you enter into a legally binding contract with the seller and are obligated to purchase the item. BUYER PAYS FOR SHIPPING TO END DESTINATION. AVAILABLE UPON PAYMENT IN FU
|
|
 |