In 
 
Order by: 
Available to: 
Price: 
 - 
$
149.25
Buy It Now
$6.40 Shipping
Condition: Used
Location: Grand Junction, United States
CyberOptics CyberScan Laser Control Board 5100030 Rev aA.
$
254.99
Buy It Now
Free Shipping
Condition: Used
Location: Seagoville, United States
$
250.00
Buy It Now
$10.20 Shipping
Condition: Used
Location: Oklahoma City, United States
Listed is a used QUANTRONIX 0203-03064 Q-Switch Laser Control UnitIt has not been tested for functionality but it was pulled off a working system. The ... moreunit is in great physical condition with no damage. Because I have no way of testing to see if the unit is working I’m selling as-is and/or parts only. Below is a description of the function of a Q-Switch Q switching is a technique for obtaining energetic short (but not ultrashort) light pulses from a laser by modulating the intracavity losses and thus the Q factor of the laser resonator. The technique is mainly applied for the generation of nanosecond pulses of high energy and peak power with solid-state bulk lasers.
$
254.99
Buy It Now
Free Shipping
Condition: Used
Location: Seagoville, United States
$
6588.32
Buy It Now
Free Shipping
Condition: Used
Location: Flint, United States
No way to power it up and I was told this was a working unit. Being sold as is. As you can see the safety bubble on the unit is still showing good and ... morethe seal on the unit is as well.
$
7499.99
Buy It Now
Condition: For parts or not working
Location: Leander, United States
(1) Coherent HR50 Laserhead module. Manufacturer: Coherent. Coherent FAP600-25W-805.0 TO809.0-F90E
$
25000.00
Buy It Now
Condition: Used
Location: Columbus, United States
Item is in good condition. Unit has been tested for power on. Sold as is.
$
7500.00
Buy It Now
Condition: Used
Location: Pflugerville, United States
Thick Film ESI 44 Resistor Laser Trimmer System with Step and Repeat. This system was taken off line in working order. With this said item is sold as ... moreis and will be a NO RETURN PURCHASE.Buyer is responsible for paying and coordinating freight service for this item.
$
21500.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
A compact, portable design, coupled withLaserStar’s well-known reputation for high quality, efficient laser sources. complex assembly, automation and ... morerepair applications for the industrial marketplace.
$
34900.00
Buy It Now
Free Shipping
Condition: New
Location: Argentina
Mutech microsystems microlaser is a low cost direct optical lithography system oriented to universities and research facilities looking to expand their ... morecapabilities. It allows you to import the designs to be written from cells of GDSII files or directly from PNG images.
$
8998.56
Buy It Now
$7.63 Shipping
Condition: Used
Location: Buda, United States
Brooks/Equipe/PRI (For AG Associates 4100, KLA UV1250, KLA UV1280, Thermawave 2600, 3290,5240 and others. REQUIRED BY US LAW. Nicole Jackson at getsparesllc. ... more(See Hours of Operation, above). Zhòngyào de! ).
$
53100.00
Buy It Now
$1500.00 Shipping
Condition: Seller refurbished
Location: San Jose, United States
QTY 2 Signtone Model 926 with Coaxial probe holders (not shown in the pictures). We have dark box, vibration table, laser cutter, more positioners. We ... morecan tailor the machine to your specifics. Detailed pictures with and without the laser are shown.
$
24000.00
Buy It Now
Condition: Used
Location: Milpitas, United States
Rofin EasyScribe F20 Laser Marker, YB Fiber, 1000-1200nm Wave Length, 20W Laser Power. Farmon ID: 452990. Operation manual, monitor and software included. ... moreMachine was recently taken from a FAB in San Jose and is operational.
$
67.99
Buy It Now
Free Shipping
Condition: Used
Location: Seagoville, United States
$
13500.00
Buy It Now
Free Shipping
Condition: Used
Location: Ukraine
Note that you can reach out directly to Exatron if you require any assistance setting up this system to suit your specific needs. We also have the Exatron ... more1010-E Manual Tape and Reel Machine Taper, which can be used manually or combined with the EXATRON 902.
$
549.00
Buy It Now
Free Shipping
Condition: Used
Location: San Diego, United States
Item is in excellent condition. No cables or additional components.
$
12999.98
Buy It Now
$350.00 Shipping
Condition: Used
Location: Bloomfield, United States
$
39.00
Buy It Now
Free Shipping
Condition: Used
Location: Riverview, United States
$
14500.00
Buy It Now
Condition: Used
Location: Fremont, United States
It's a completed system, contains. Hyper Rapid 50 Laser head : Generate picosecond laser pulse at 1064nm and frequency doubler.
$
4995.00
Buy It Now
$57.16 Shipping
Condition: For parts or not working
Location: Bala Cynwyd, United States
The locked output power is around 1.6 mW total and is stable. However, there is a story with this laser. It has now been run here for >200 hours on a ... moremonitored setup with no issues. The firmware log shows no errors and the only anomaly is that the relative amplitude of the H and V polarized components seems sensitive to cooling water temperature.
$
2499.99
Buy It Now
$75.00 Shipping
Condition: Used
Location: Lake Forest, United States
We do our best to describe everything.
$
1999.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
(W/ Scanlab SCANcube 10. TYPE : SCANcube 10 λ HP 10600nm. Manufacturer : SCANLAB. Model Number : Laser Head ULR-30. Sold as is). It was removed from machine ... moreof working condition. If You Want.
$
7500.00
Buy It Now
$268.44 Shipping
Condition: Used
Location: Singapore
Item ID: 29736. South Korea�. the order will be automatically relisted. We will review and approve your price match request on a case by case basis. We ... morealso do not price match against sites with on-going flash sales.
$
49.00
13h 35m 22s
0 bids
$23.19 Shipping
Condition: Used
Location: Sunnyvale, United States
SPECTRA-PHYSICS LASER POWER SUPPLY Model R2-8.
$
2500.00
Buy It Now
Condition: For parts or not working
Location: Gilroy, United States
This Ultratech Stepper Assembly features a Pneumo Precision Inc. However, this is the extent of my testing of this system, and it is being sold as-is. ... moreThe laser power up, and emits a red laser beam, as shown.
$
3000.00
Buy It Now
$49.69 Shipping
Condition: Used
Location: Saint Petersburg, United States
This listing is for a homebrew femtosecond diode pumped laser built for use as a seed for industrial ultrafast lasers. 1030nm. I was told it was intended ... morefor use at 80 mhz, 200 mw and 200 fs. included is a wavelength electronics laser diode driver and TE controller for the pump. The pump diode is good and there is ir emission from the KGW but the unit needs to be aligned to lase and modelock. Offered as-is, with no testing beyond that of the pump laser.
$
999.90
Buy It Now
Free Shipping
Condition: Used
Location: 구로구, South Korea
WAVE LENGTH: 532nm. Model Number : DIODE PUMPED SOLID STATE LASER. DIODE PUMPED SOLID STATE LASER. MAX POWER: 15W. · EMS : Commonwealth of Independent ... moreStates (CIS-Russia, Ukraine…. And so on) China. CLASS IIIB LASER PRODUCTS.
$
69.99
Buy It Now
$12.50 Shipping
Condition: New – Open box
Location: Albuquerque, United States
For sale is a New/Surplus Applied Materials 00190-00137 for 150mm systems. We have several used wafers as well. What is shown in the photos is what you ... morewill receive.
$
219.99
Buy It Now
Free Shipping
Condition: Used
Location: Palatine, United States
Search our eBay Store! CyberOptics Microscan 30 Video Inspection Microscope w/Laser Sensor 750nm 2.4mW SKU: JV-BIN-C-MICROSCAN30 Condition: Used Packaging: ... moreOEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 CyberOptics Microscan 30 Video Inspection Microscope with CyberOptics Laser Sensor 750nm 2.4mW· 1) CyberOptics Microscan 30 Video Inspection Microscope· 1) CyberOptics Sensor Laser Module· Unit is untested. The laser micrometer tool is able to adjust laser vertically. The platform micrometer tool can slightly adjust the platform horizontally. Dimensions(L”W”H” 17 ¾* 10 ½* 13 ¾ approx. As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 8. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as
$
300.00
Buy It Now
$28.99 Shipping
Condition: For parts or not working
Location: New Paris, United States
Assembleon/Phillips/CyberOptics Laser PPU Unit 4022 550 05331 *WARRANTY* Lot of 3 *FOR PARTS. Type: RS108SR5007 LOT OF 3: Used Assembleon Laser PPU units. ... moreAll 3 units have service records to show working history. *FOR PARTS* See pictures for description. 30 DAY ABSOLUTELY HASSLE FREE WARRANTY. Please contact us for any questions or visit our page to view our other listings. Huge selection and top notch service.
$
300.00
Buy It Now
Free Shipping
Condition: Used
Location: Temple, United States
Model Number: 345570.
$
299.99
Buy It Now
$58.00 Shipping
Condition: Used
Location: Milton Freewater, United States
$
12999.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
(Model Number : Calisto laser head. Calisto LASER SYSTEM. Laser unit: Calisto. 5PCS MICRO OBJECTIVE LENS MOUNT LINEAR ACTUATOR UNIT. Quantity : 1 Unit. ... morePOWER DC12V 220mA. MODEL: VMU-L. Sold as is).
$
4725.00
Buy It Now
$1200.00 Shipping
Condition: For parts or not working
Location: Ventura, United States
Click here to see description.
$
807.50
Buy It Now
$70.00 Shipping
Condition: Used
Location: Miami, United States
New Wave Research Solol Laser 20Hz - 15hz.
$
3500.00
Buy It Now
$53.05 Shipping
Condition: Seller refurbished
Location: Bala Cynwyd, United States
Spec for the -03 is 250 µW minimum and 3.3-3.9 MHz REF. So the tube should be very healthy. Get your Tool up NOW instead of waiting months for a laser ... morefrom Zygo.
$
5450.82
Buy It Now
$17.21 Shipping
Condition: Used
Location: Buda, United States
Nicole Jackson at getsparesllc. (See Hours of Operation, above). REQUIRED BY US LAW. Zhòngyào de! Rúguǒ méiyǒu zhèxiē xìnxī, tā jiāng bèi hǎiguān kùn ... morezhù. Měiguó fǎlǜ yāoqiú. 重要的!!!如果没有有效的 电子邮件和电话号码,我们无法向您发货。如果没有这些信息,它将被海关困住。请立即发送您的有效电子邮件和电话,否则我们将无法处理这批货物。美国法律要求 。.
$
4999.99
Buy It Now
Condition: Used
Location: Van Nuys, United States
Newport Research Corp (NRC) Optical / Vibration Isolation Table. Newport Research Corporation (NRC). (4) Isolation Pads. Optical Table / Laser / Robotics. ... more( qty 1 ) 18" x 2" Oval Slot Sealed Hole in Table.
$
995.00
Buy It Now
Free Shipping
Condition: Used
Location: Charlestown, United States
$
379.99
Buy It Now
Free Shipping
Condition: Used
Location: Stevensville, United States
Used unit from working machine. Item as shown.
$
12999.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
Model Number : Calisto Laser System. Calisto Laser System. V-Thechnology Laser Unit. 5PCS Objective Lens. Quantity : 1 Unit. It was removed from machine ... moreof good condition. Slitunit and Assembly. More detail .
$
285.00
Buy It Now
$19.10 Shipping
Condition: Used
Location: Schenectady, United States
$
33999.99
Buy It Now
Condition: Used
Location: Finland
1x Jot Automation J501-57 Laser Depaneling Cell. 600 kg (1323 lbs). • CO2 laser. • Machine vision. • Graphical User Interface. • Air pressure 0.6 MPa ... more(6 bar). Model: J501-57. Board specifications.
$
4998.00
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
Rofin / PowerLine F 100-1064. ※ Manufacturer : rofin. ※ M odel : PowerLine F 100-1064. ROFIN-SINAR LASER. ※ Designation : ROFIN-SINAR LASER, 07.2018.
$
1799.99
Buy It Now
$33.99 Shipping
Condition: Used
Location: Richardson, United States
A working pull Inficon Stiletto Scanning-Liquid Particle Detector
$
17999.00
Buy It Now
Condition: New – Open box
Location: Carpinteria, United States
IF THERE ARE ANY PROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE. ALL CLAIMS MUST BE REPORTED AND ACKNOWLEDGED WITHIN 72 HRS OF RECEIPT.
$
24500.00
Buy It Now
$1575.00 Shipping
Condition: Seller refurbished
Location: San Jose, United States
QTY 2 positioners (Cascade MH series or compatible series from Micromanipulator). High power Mitutoyo microscope with 2x,20x, 100x objectives and 10x ... moreeye pieces total magnification 2000X. Ilumination system for the microscope with the fiber optics & Light source as shown in the picture.
$
1758.69
Buy It Now
$470.23 Shipping
Condition: Used
Location: Singapore
Item ID: 4819. Part Number: M25. We also do not price match against sites with on-going flash sales. PRICE MATCH POLICY. More information Condition: USED. ... moreWe will review and approve your price match request on a case by case basis.
$
3000.00
Buy It Now
$100.00 Shipping
Condition: Used
Location: South Korea
$
13499.10
Buy It Now
Condition: Used
Location: Tempe, United States
You are buying one used HAAS LASER HL 353D Haas 1LLK-B 03/6m Fiber Laser Light Cable 4M. We'll be glad to help.
$
5950.00
Buy It Now
Condition: For parts or not working
Location: Saint Paul, United States
Exatron model 902 random sort handler. Exatron Software: Applied Motion Works ver. Z Plunger: Servo motor-driven lead screws. X-Y Drive System: Servo ... moremotor-driven lead screws. Appears to be mostly complete.
$
6500.03
Buy It Now
$74.01 Shipping
Condition: Used
Location: Buda, United States
Two-zero-eight-nine-eight-two-one-eight-six-two Direct Line. Nicole Jackson at getsparesllc. (See Hours of Operation, above). REQUIRED BY US LAW. Zhòngyào ... morede! Rúguǒ méiyǒu zhèxiē xìnxī, tā jiāng bèi hǎiguān kùn zhù.
$
3500.00
Buy It Now
$156.14 Shipping
Condition: Used
Location: Singapore
Item ID: 29879. If there are more than (1) quantity, do feel free to reach out to us for an actual image of each unit. Part Number: 8070-0159-02X. We ... morealso do not price match against sites with on-going flash sales.
$
1452.10
Buy It Now
$309.90 Shipping
Condition: Used
Location: Singapore
Item ID: 26969. South Korea. We also do not price match against sites with on-going flash sales. PRICE MATCH POLICY. We will review and approve your price ... morematch request on a case by case basis. Weight: 12.2 kg.
$
49999.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
Model Number : Coherent Laser Tube 1235777. PRESSURE TANK 1229195R. Part-No : 1235777. Manufacturer : COHERENT. Component for Laser tube GCS II VHP C-SERIES. ... moreModel :Laser Tube. Component for :Laser tube GCS II VHP C-SERIES.
$
80000.00
Buy It Now
Condition: Used
Location: San Jose, United States
This unit is an XLC-100 Laser Cleaning System for Semiconductor Wafers with a 10W 355nM YAG Laser (Lightwave Q301-HD). 2070 S 7th St, C.
$
9500.00
Buy It Now
$207.68 Shipping
Condition: Used
Location: Singapore
29875 APPLIED MATERIALS DIODE LASER W/ FIBER OPTICS CABLE, 0129-9535-23S 1100-A0110. Item ID: 29875. DIODE INTERFACE LO-PROFILE 0135-0388. South Korea�. ... moreIf there are more than (1) quantity, do feel free to reach out to us for an actual image of each unit.
$
20000.00
Buy It Now
Condition: For parts or not working
Location: Gilroy, United States
For all Texas orders, the rate of 8.25% will be applied. Is there a Dock or Forklift available?.
$
799.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Montgomeryville, United States
GSI LUMONICS ASP2 5MHz ASSY 10740 3D GENERAL SCANNING LASER BOARD STOCK #284530 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY)AUTHENTICITY GUARANTEED!WE ... moreSOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES. 
$
127.49
Buy It Now
Free Shipping
Condition: Used
Location: Seagoville, United States
Hewlett Packard HP 10780B Optical Receiver 20 days DOA warranty. Local buyers can inspect the item with no problems SR-C-1-1. PLEASE READ THIS: Unless ... moreotherwise stated. All of our items are USED. In many cases auctions will NOT include peripheral equipment such as power cords, chargers, manuals, software, cables, OEM warranties, batteries, cradles, keyboards, mice, licenses and Operating Systems Condition: Very good Please Note the following: 1. 20 days warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. S/H in continental USA. Expedited shipping can be arranged upon request. Other Notes of Interest Shipments: All items will ship within 1-2 busness days of payment receipt.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
RODENSTOCK F-Theta-Ronat f=250mm Laser Marking Lens
I just sell this eqipment as the picture is shown. You can refer the shape of this item by the pictures that I posted. You can refer the status of this item by observing the pictures carefully. I only sell it as is. I do not accept return. sell as is. Thank you. God bless you. shipping- The shipping company is EMS. I send my item by using this company. The delivery is performed by every post office of each country. If you order the item. Then I pack the product right away and let you know the tracking number. You can track the item by the link below. http:service.epost.go.kr/iservice/ems/ems_eng.jsp
Philips PZ2000 HORIBA Jobin Yvon Laser Ellipsometer 200MM with Computer
Philips PZ2000 HORIBA Jobin Yvon Laser Ellipsometer 200MM with Computer Description Philips PZ2000 Horiba Laser Ellipsometer 200MM with Computer& Monitor According to the thin film division of HORIBA Jobin Yvon the PZ2000 is a cost effective laser ellipsometer that allows accurate characterization of film thickness and optical constants. And is especially suited to transparent films such as oxides, nitrides, high k and low k dielectrics. It delivers the highest performance in terms of accuracy and repeatability. Single layer films can be measured to sub-angstrom precision. High precision. Cost effective table top laser ellipsometer for research and industrial quality control applications 10 µm microspot useful for patterned samples found in semiconductor and biological applications Fully upgradeable: up to 3 wavelengths. Motorized ... moresample stage, autofocus, pattern recognition, DUV spectroscopic reflectometer Manufacturer Philips Manufacturer Part Number PZ2000 Item/Ship Weight 193 LBS Tech Condition This item is used and has been tested to be in good working condition. This tool was recently removed from a DVD manufacturing faciltity where is was setup and being used. We have not tested ourselves and you will need someone familiar with it to configure it for your needs. This tool can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for
Pacific Precision PPLI JMAR Mirage 3-Axis Vision Laser Micron Measurement System
Pacific Precision Mirage(PPLI) Non-Contact Automatic 3-Axis Vision and Laser Based Tabletop Measurement System Automatic vision and laser measurement system Includes Mirage. Joystick controller, PC, monitor, kbd, mouse This came a major hard drive manufacturer and looks like it's complete. The computer is running Windows NT and starts up looking for a Novell network. We cracked the NT password so we could play around with it. But when we started the software, it gave a message that it wasn't communicating with the Mirage. We might be missing a cable, or maybe we just don't know what we're doing. The stage responds to the joystick nicely, the light source works, and the lens shuttle works smoothly. It appears to be pulled from working duty in excellent condition. Please email with any questions. Sold as is. I have another similar ... moreunit which is mostly complete. Check my auctions if you're interested in a second unit for parts or repair. The Mirage automatic vision and laser measurement system provides high accuracy measurement in a compact tabletop model. A typical configuration may include microscope optics using a two-position precision automatic lens shuttle. Includes: Automatic Two-Position Lens Shuttle• Manual or computer controlled• Supports micro or macro optics• Supports ring light 3-Light Lamp Source• Digital computer control• Independently controlled channels Please visit the manufacturer's webpage for more info: Terms of Sale Buyer pays shipping by dock truck from 55107. Paypal usually ships within 24 hours. Crating is available for an extra $100. International bidders PLEASE contact us before bidding. Please don't bid and then act surprised that shipping is expensive! The eBay freightquote is often ridiculously high. Please email for a more accurate quote. Thanks for your interest. Please email with any questions.
GSI Lumonics 8300 AOI, Process Improvement 3D laser for PCB Assembly
GSI LUMONICS SVS 8300 SVS 8300 SPI- Solder Paste Inspection System. Includes: ● High-Speed Imaging hardware. CD-Rom, DAT Tape drive, Unixware OS, Xwindows with GUI, 15: flat screen monitor, SMEMA Interface, trackball, parallel por, integrated one stage conveyor. Options: ● 1X Resolution 1024 5MHZ dual detector scanner. ● lift plate with support posts. ● By-pass programming option. ● RS232 serial ports. 4) additional. ● Bar code reader s/w. S/W upgraded to v4.7 in 2006 Provides height and volumetric data. The best indicators of final solder joint quality. ● Meets the most demanding cycle time requirements with 100% inspection. ● Industry’s most accurate and reliable inspection data. Via patented 3-D laser scanning. ● Includes component placement inspection. ● Reduces scrap and rework later in the assembly process. ● Accommodates very large ... morepanels. Up to 610mm x 660mm(24" x 26" ● Ease of use during set-up& operation. The Fastest Way to Cut Your SMT Assembly Costs The SVS™ 8300. GSI Group’s fourth generation solder paste inspection system. Gives you more flexibility in improving your printing process through 100% solder paste inspection. In addition, the SVS 8300 provides full component placement inspection. Designed especially for contract manufacturers of fine-pitch and high-density PCBAs. The SVS 8300 enables you to ramp-up and change over to new products faster while providing continuous process improvement and random defect detection. 100% In-Line Inspection Designed for high throughput in-line inspection. The SVS 8300 automatically inspects each board immediately after solder paste screen printing for correct solder paste volume. Area, height, X/Y position, and bridging. The comprehensive data collected will be distilled in real-time into the data you need. SPC and reporting capabilities are built directly into the operator interface to help you control and improve your process quickly and effectively. Stable and Robust Inspection Programs Inspection programs for the SVS 8300 can be developed eas
JMAR MIRAGE S2610-01 NONCONTACT 3-AXIS TABLETOP VISION & LASER MEASURING SYSTEM
Liberty Machinery Company You are looking at: 1) USED- JMAR MIRAGE MODEL S2610-01 NON-CONTACT AUTOMATIC 3-AXIS TABLETOP VISION AND LASER MEASURING SYSTEM* Serial No. 1014 New- 1999 LMC#30386 The Mirage Automatic Vision and Laser Measurement System Provides High Accuracy Measurement in a Compact Tabletop Model. High Magnification Platform Stability. Stage Accuracy, and High Resolution Make the Mirage the Perfect Choice for Measurement and Process Control. This System is Ideal for Inspection of Such Parts and Components as: TAB-tape. Ball Grid Arrays(BGA) Flex Circuits, Head Gimbal Assemblies(HGA) Lead Frames, Sliders(Pole Trip and Gap Measurement) Wire Bonding(Weld Bonds or Ball Bonds) Wire Loop Height, Wafer Critical Dimensions(CD) SPECIFICATIONS: X-Y Stage Travel 10" X 4" Z-Axis Travel- Fine Focus 2" Z-Axis Height Adjustment- ... moreManual 8" Optical Supports Micro or Macro Optics Magnification Capacity Up to 3000X Illumination Source 3 Ch. Digital Light Control Illumination Type Transmitted& Incident Stage Resolution and Accuracy- Resolution 1 uM Stage Resolution and Accuracy- Repeatability Stage Resolution and Accuracy- Accuracy 3 uM Electrics 120/220V/ 1 Phase/ 60Hz Computer Hardware IBM Pentium Class PC Computer Display SVGA Color Monitor*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" It
Lasertec 2LM21 Scanning Color Laser Microscope
Lasertec 2LM21 Scanning Color Laser Microscope Comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from Lasertec and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. This unit was donated to a university by NEC. I have applied power to it and watched the optics change for the two different type of lasers but I have no way to test it after that. The Main Unit's Serial Number Tag Reads: Model Number: 2LM21 Serial Number: 154051 Manufactured: April 1991 The Nikon Microscope's Serial Number Tag Reads: Serial Number: 232347 The Laser Power Supplie's Serial Number Tag Reads: Manufacturer: NEC Model Number: GLG30779 Serial Number: 352 Date of Manufacture: July 1990 Nikon Microscope Objectives and Eye Pieces List: Eyepieces: CFWN 10X/20 and ... moreCFW 10X M Plan 5 DIC 0.1 210/0. Serial Number: 327517 M Plan 10 DIC 0.25 210/0. Serial Number: 328194 M Plan 20 DIC 0.4 210/0. Serial Number: 327753 M Plan 40 DIC 0.65 210/0. Serial Number: 327128 M Plan 60 DIC 0.70 ELWD 210/0. Serial Number: 632032, Inventory of the Boards Inside the Bottom Chassis(From Left to Right) OBIC AMP: OBIC AMP-B 2P-573 OBIC SEL: OBIC SELECT 2P-575A SH R CRCT: SH-CORRECT-D 2P-576 SH G CRCT: SH-CORRECT-D 2P-576 SH B CRCT: SH-CORRECT-D 2P-576 3 CH A/D: 3 CH A-D 2P-571 FSM R: 2LM FSM 2P-569 FSM G: 2LM FSM 2P-569 3 CH D/A: 3 CH D-A 2P-572 RGB DRIV: RGB DRIVE C 2P-578 COMP: COMPOSITE 2P-584A SYNC: 2LM SYNC 2P-574A HV DEF: HV-DEF-B 2P-580A MIRR DR: MIRROR DRIVER 2P-518A The Laser Hour Meters Read: He-Ne: 565.7(give or take a few) Hr: 421.5(give or take a few) For More Pictures Please Click the Following: $150.00 minimum for packaging. Handling, and order processing. Shipping to be determined by destination. If you have any questions please call Michael at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. Also. Please to view or other auctions! 06/07/13 Powered by The free listing tool. List your items fast and easy and manage your active items.
Inspection .37-.74X Magnification Lens Machine View Laser T35
This Listing is for a used Inspection.37-74X Magnification Lens Machine View Laser. This Inspection.37-74X Magnification Lens was purchased from a companies discontinued stock/supply. It is in good condition with clean lenses. The Assy. is 115433 and it measures: 5.25"L)x1.5" in diameter at One end and 1.25" in diameter at the other. Normal 0 false false false EN-US X-NONE X-NONE Please judge for yourself and consider the photographs very carefully to determine the state and condition before you make your purchase thank you! If it is not pictured. It is likely NOT included in the sale. We require payment within 5 calendar days. Payment may be made through PayPal. Or email us to request direct payment using VISA, Mastercard, or American Express. There will be no sales tax charged on your purchase at this time. PLEASE UNDER STAND. ... moreWE ARE A BUSINESS AND REQUIRE PAYMENT BY THE 6th DAY. IF YOU HAVEN'T ASKED TO MAKE ARRANGEMENTS FOR LATE PAYMENT OR WE DO NOT HEAR FROM YOU, WE WILL HAVE TO FILE A"BUYER HAS NOT MADE PAYMENT" CASE WITH EBAY! We ship using UPS or USPS for all Destinations in the USA. We do not ship or sell to International Countries. So please do not ask, thank you. NOTE: BEFORE YOU MAKE YOUR PURCHASE PLEASE KNOW WE DO NOT SHIP ON OTHER CUSTOMERS ACCOUNTS. WE SHIP USING UPS OR USPS. WE DO NOT USE FEDX OR ANY OTHER CARRIER AT THIS TIME. Buyer is responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Goods typically ship three to five business days after receipt of payment. We strongly encourage buyers to do their own research before buying. Please. It is very IMPORTANT that you know exactly what you are buying before you commit to the purchase. If you have any questions. PLEASE email us and ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. This listing is offered with a 14-Day retu rn privilege for all New& Used items. You may return this item at your own ex
Inspection .31x-.63x Magnification Lens Machine View Laser T35
This Listing is for a used Inspection.31x-63x Magnification Lens Machine View Laser. This Inspection.31x-63X Magnification Lens was purchased from a companies discontinued stock/supply. It is in good condition with clean lenses. The Assy. is 117635 and it measures: 6"L)x1.5" in diameter at One end and 1.25" in diameter at the other. Plus it comes with a Lens cradle to help protect it. The lenses are coated#2 137789. And#3 134700. Normal 0 false false false EN-US X-NONE X-NONE Please judge for yourself and consider the photographs very carefully to determine the state and condition before you make your purchase thank you! If it is not pictured. It is likely NOT included in the sale. We require payment within 5 calendar days. Payment may be made through PayPal. Or email us to request direct payment using VISA, Mastercard, or ... moreAmerican Express. There will be no sales tax charged on your purchase at this time. PLEASE UNDER STAND. WE ARE A BUSINESS AND REQUIRE PAYMENT BY THE 6th DAY. IF YOU HAVEN'T ASKED TO MAKE ARRANGEMENTS FOR LATE PAYMENT OR WE DO NOT HEAR FROM YOU, WE WILL HAVE TO FILE A"BUYER HAS NOT MADE PAYMENT" CASE WITH EBAY! We ship using UPS or USPS for all Destinations in the USA. We do not ship or sell to International Countries. So please do not ask, thank you. NOTE: BEFORE YOU MAKE YOUR PURCHASE PLEASE KNOW WE DO NOT SHIP ON OTHER CUSTOMERS ACCOUNTS. WE SHIP USING UPS OR USPS. WE DO NOT USE FEDX OR ANY OTHER CARRIER AT THIS TIME. Buyer is responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Goods typically ship three to five business days after receipt of payment. We strongly encourage buyers to do their own research before buying. Please. It is very IMPORTANT that you know exactly what you are buying before you commit to the purchase. If you have any questions. PLEASE email us and ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. This listing is offered wi
Servowriter Servo Track Writer Laser Interferometer STW for Hard Disk Repair
This is a servo track writer mechanism as used in 3.5" Maxtor/Seagate products. Mechanism is complete. No control box included. Contains an accurate laser interferometer. Clock r/w board, etc. Working when retired, but sold strictly as-is for parts. Buyer pays actual shipping. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13f3004265a-0xfe-
Inspection NO Magnification Markings, Lens Machine View Laser AA35
Safecomponents This Listing is for a used Inspection Magnification Lens Machine View Laser. There is no markings or maker to indicate any information for this lens viewer. I see no cracks or chips in the lenses. Clear. There is light scratches on the casing. It measures: 6-5/8"L)x1-1/4" in diameter. Payment Please judge for yourself and consider the photographs very carefully to determine the state and condition before you make your purchase thank you! If it is not pictured. It is likely NOT included in the sale. Thank you! Feel free to ask questions before hand and we will do our best to help. PLEASE DO NOT MAKE YOUR PURCHASE UNTIL YOU'RE SURE THIS IS WHAT YOU WANT! THANK YOU! We require immediate payment. W e will file for cancellation in 24 hours or less. The item may be resold on eBay if payment isn’t immediate. Payment ... moremust be made through PayPal. Shipping We ship using UPS or USPS for all Destinations in the USA. We do not ship or sell to International Countries. So please do not ask, thank you. NOTE: BEFORE YOU MAKE YOUR PURCHASE PLEASE KNOW OUR COMPANY POLICY IS WE DO NOT SHIP ON OTHER CUSTOMER'S ACCOUNTS WITH NO EXCEPTION. Buyer is responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Goods typically ship within a 24 hour period once payment is cleared however, sales from the weekend will typically ship on Monday. Terms of Sale We strongly encourage buyers to do their own research before buying. Please. It is very IMPORTANT that you know exactly what you are buying before you commit to the purchase. Please judge for yourself and consider the photographs very carefully to determine the state and condition before you make your purchase thank you! If it is not pictured. It is likely NOT included in the sale. Feel free to ask questions before hand. If you have any questions, PLEASE email us and ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. This listing is offered with
KLA TENCOR LIS-1010 200MM WAFER LASER CONFOCAL IMAGING INSPECTION STATION SYSTEM
This listing is for a confocul review station/ laser imaging system. Make: KLA Tencor/ Ultrapoint Corp, Model LIS-1010(LIS1010) Serial# 1010A-123, Input Power: 208 VAC Single Phase 20 Amp 50/60Hz, Description: 200mm/ 8in Patterened Wafer[Defect] Inspection Station, Includes all/only items pictured, Original Price: Approximtely $368.000, All items are"as pictured" I have a surplus store. Some"new" items may not include original packaging. I do my best to keep all quantities correct. All items listed on eBay should be in stock. I do not"broker" parts or anything like that. I have been in the trucking/distribution business for a long time. So you can expect your package to be shipped safely. I insure everything with FedEx. And will also personally back up your purchase(shipping, and the product itself) Powered by ... moreThe free listing tool. List your items fast and easy and manage your active items.
CyberOptics LSM2 Laser Section Microscope SPI Solder Paste Inspection Measuremen
UP FOR GRAB: CyberOptics LSM2 Laser Section Microscope SPI Solder Paste Inspection Measurement Used in good cosmectic condition. Powers up. We are not an experts to test it to full details. Will be sold AS IS. No other parts, not pictured or described are included Units in good condition- please see pic WHAT YOU SEE WHAT YOU GET. FREE PICK UP OR YOU CAN ARRANGE YOUR OWN SHIPPING PACKING FOR IT Please Note the following: 1. no other warranty expressed or implied. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Ships via UPS ground. Expedited shipping can be arranged upon request. Other Notes of Interest S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1-2 business days of payment receipt.
Candela Instruments ADC Module Analog Digital Converter DIO Laser Phase Shift
What You'll get: Candela Instruments ADC Module Analog Digital Converter DIO Laser Phase Shift Optical Surface Inspection Analyzer Detachable Power Cord Other Accessories that are Not pictured or mentioned under"What You'll Get" are Not included Please visit our eBay Store for more similar items! Testing: Pulled from a working environment. Unit powers up with indicator lights on. No"error" light noted. Comes with extra cooling fan on top. Guaranteed Working! Cosmetics: Pictures are of the actual item. Unit is in very good condition with minor scratches from typical use. Please See pictures for cosmetics. Policies& Definitions: Shipping Most items ship out within 1-2 BUSINESS days after the payment clears. We allow local pick up. Handling fee of $9.99 and CA tax will apply. We combine shipping to save you money ... moreif the items can be combined and shipped safely. We offer a combined shipping discount of $3 for each additional item purchased. Free shipping offers do NOT apply to Puerto Rico. Alaska, Hawaii and international transactions Definitions: GUARANTEED WORKING MEANS: The item is guaranteed working as long as we receive it back within 30 days from the purchase date. We will replace the item at no additional cost if the item is DOA. If replacement is Not available. We will refund the purchase price. Please bid accordingly. AS-IS MEANS: The item is sold AS-IS Where is. This means that the buyer acknowledges that the item may or may Not be working and that the item may or may Not be complete and the buyer is willing to accept the risk. Please bid accordingly. Shipping and handling cost is Not refundable under any circumstances and the buyer is responsible for any additional shipping cost. please bid accordingly. Return Policy Every item we sell is carefully inspected before it is shipped and is tested to the best of our ability. If merchandise is Not as described please keep all packing materials. Brochures, paperwork, etc. and contact us immediately after your package arrives for a
GAERTNER SCIENTIFIC CORP ELLIPSOMETER L116A & MELLS GRIOT 05-LHP-321 LASER!
GAERTNER SCIENTIFIC CORP ELLIPSOMETER L116A& MELLS GRIOT 05-LHP-321 LASER! THIS TURNS ON& LASER IS WORKING BUT NO OTHER TESTING HAS BEEN DONE AS WE HAVE NO KNOWLEDGE ON DOING SO AND SHOULD BE BY A QUALIFIED TECH. THIS IS A NO RESERVE AUCTION. WE ONLY SHIP WITHIN THE USA& USE UPS GROUND AT 27"x25"x23" 70LBS. WE SHIP MONDAY THRU FRIDAY UNTIL 3PM EASTERN TIME EXCEPT WEEKENDS AND HOLIDAYS. WE ARE A VERIFIED EBAY AND PAYPAL SELLER. THANK YOU FOR LOOKING& HAPPY BIDDING!
OPTICAL YELLOW + GREEN DOUBLET FILTER LASER OPTICS BIN#2-D-12
OPTICAL YELLOW + GREEN DOUBLET FILTER LASER OPTICS BIN#2-D-12 Sold as is. Thanks.
OPTICAL GREEN FILTER LASER OPTICS BIN#2-D-11
OPTICAL GREEN FILTER LASER OPTICS BIN#2-D-11 Sold as is. Thanks.
OPTICAL YELLOW FILTER LASER OPTICS BIN#2-D-10
OPTICAL YELLOW FILTER LASER OPTICS BIN#2-D-10 Sold as is. Thanks.
CyberOptics LSM2 Laser Solder Height Inspection
Great unit to verify solder paste height. Unit is in good working condition. We used this machine to verify our process control. After documenting process control for a few years. We no longer need to continue use. Unit is good working condition. This unit comes with Keyboard, Monitor, calibration tool, and mouse. Cart in picture is not included in this offering. Items may be shipped on a pallet using a freight method only to lower 48 states for free delivery. Pallet delivery will need a loading dock or equivalent to get pallet out of delivery truck.
CYBEROPTICS LSM LASER CAMERA MICROSCOPE VIDEO CONTROL HEAD (Ri)
CYBEROPTICS LSM LASER CAMERA MICROSCOPE VIDEO CONTROL HEAD USED CONTROL HEAD FOR LSM THIS CAME IN FOR PARTS STOCK FROM REPAIR CO. I HAVE NO DONE ANY TESTING AS I DON'T HAVE FULL SYSTEM SOLD AS IS FOR PARTS. LOOKS CLEAN Message with any other questions you may have! Thank you for Looking! Please Leave Feedback& I will do the s ame for you! This item was listed by Reasonable offers on multiple item listings. For the most part. I do not buy scrap lots, I look for and buy selected inventory in good condition that I believe my customers would like. Many products are things that I have been asked for by you so let me know if I can find something out this way for you. CLICK TO VIEW LARGER IMAGE I ship out quickly and pack with antistatic bags. Bubble wrap and even wrapped with paper They should be safe! All Items listed are sold AS-IS Unless ... morestated otherwise in the description. Any information that I offer for use is given/ sold as-is. Use or take at your own risk. Please check that the listed item is what you need. As all items are sold"as is" Payment to be within 7 days from close of auction. I Reserve the right to change shippers. Shipping to Confirmed Paypal address only. Customs Documents will not be falsified. Cost will be listed as set by EBay Checkout. YOU are responsible to know your own country's duties and taxes. Rates/policies before you buy. Due to the changing levels of service and care provided by the postal services. We cannot guarantee delivery outside the United States. Insurance is strongly suggested, may be required and some can not be insured. Also if Item is lost or damaged refund will be for cost of purchase price only not shipping as the insurance's do not reimburse me for that. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs. If you still want the item, we are willing to try and re-ship; this will require you to pay the applicable shipping costs again. Buying the i
ASC Technologies Laservision SP3D Laser Solder Inspection
Laservision SP3D laser solder inspection system. This is made by ASC Technologies. Who make several solder inspection systems. This is one of their most popular systems. These units are used by manufacturers for detecting quality of soldering circuits on PCB boards. It has 3D laser scanning capability. This unit was used until the business shut down. Its a little dusty but ran good before closing. It comes with the PC tower, Laser scan monitor, PC monitor, keyboard, mouse and the laser inspection module.This is great for quality control in manufacturing and for outsourced manufactured PC boards, with great savings compared to a new system. Inspections are welcomed. Please email with any questions. Free Shipping is to the 48 Contiguous USA Only. No P.O. Boxes. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14a04b151c1-0x10f-
Rodenstock X8 532nm Telescope Laser Beam Expander from Applied Materials System
Rodenstock Telescope X8 532nm from AMAT Inspection Tool Rodenstock model# 35108 Serial# 11661373. Used unit in excellent condition. Removed from an AMAT ComplusMP inspection tool. Model year 2002. We are also selling Rodenstock X5. X10 and X20 Telescope Lens, search our store for Rodenstock to check availability. See our stores Semiconductor or Laser&Optics category for related components. Local pickup in San Jose CA. available. Please contact us if expedited shipping is required. Shipping Details: Shipping weight 9 lbs.unit weight 7.5 lbs) Box size 16" x 10" x 8" For international shipments buyer is responsible for duties and tariffs. Inventory Code: GO-K-1707-1. Email: Please email or call if any questions. Office# 408-564-6264. For new and used high-tech and industrial automation parts and systems visit us online at: ... moreOr. S.
Jenoptik-Laser Progres 3012 mF, 2-E207-0151 Power Supply
Jenoptik-Laser Progres 3012 mF. 2-E207-0151 Power Supply This listing is for(1) Jenoptik Power Supply. Progres 3012 mf, Model 2-E207-0151. This unit is used but in good working and physical condition. GUARANTEE 100% Satisfaction Guaranteed. If you are not fully satisfied with this unit we will refund your money. SHIPPING SERVICES Local Pick-up allowed. Unless otherwise requested. Shipping will be via USPS. Shipping charges will be only what USPS charges. Shipping via Flat Rate Priority Mail will be used if the cost can be reduced. There will not be any additional charges for packaging or handling when using priority mail. Multiple items will be combined to reduce shipping costs. INTERNATIONAL SHIPPING SERVICES International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges ... moreare the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. PAYMENT Credit Card or Paypal preferred. All other forms of payment accepted. Checks must clear before item will be shipped
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.