|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: For parts or not working Location: Abington, United States Questions? Call us: 1-877-328-9236. Air-Vac PCBRM-12 Solder Pot Fountain Reflow Rework Station for Parts/Repair. Manufacturer: AIR-VAC Model: PCBRM-12 ... moreCondition: For Parts or Not Working Price: The photos show the exact item(s) the buyer will receive. Manufacturer: AIR-VAC Condition: For Parts or Not Working. This solder pot is in Fair to Poor cosmetic condition. The switch panel was relocated to an external control panel. And some of those wires are broken. The inside looks like a bowl of wire-spaghetti. The counter(which reads over 1/2 Million cycles) has a broken front panel. The plastic belt connected to the adjuster in front of the machine, is off. We are not sure what else may be missing from this machine(maybe a component holding arm? Notes: This unit is NOT working. It does not power on. Except there is one dim light on some kind of controller inside. Nothing else happens; no other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Air-Vac PCBRM-12 Solder Pot, Specifications: Manufacturer: Air-Vac, Model: PCBRM-12, Solder-fountain type rework station, Solders through-hole components with a continuous flow of molten solder, Lead free: Unknown! SKU: O08D006 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accept
Buy It Now
Free Shipping Condition: New Location: Reading, United States GC Electronics 9077-1. Heat Sink, Clamp. Clamp length: 0.67". 1 Clamp per lot.
Buy It Now
$4.46 Shipping Condition: New Location: Johns Island, United States Neoden YY1 Pick and Place machine. You will also receive the two nylon standoffs that set the filter at the proper distance.
Buy It Now
$5.99 Shipping Condition: New Location: Dickson, United States Ellageo BLL, Ellegante BLG, Esante BLN. Alternate Part Numbers: XC8307051.
Buy It Now
$11.00 Shipping Condition: Used Location: Kansas City, United States Used MOXA EDS-316 Rev 2.0 ETHERNET DEVICE SWITCH 16 Port.
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States Excellent working condition. I got this for work and ended up not needing it. Let me know if I can answer any questions for you.
Buy It Now
Condition: Used Location: Minneapolis, United States Provide a basic Functionality Video via Drobox.
Buy It Now
$56.00 Shipping Condition: Used Location: Stanardsville, United States Please look at the pictures to see what is included. Nothing else is included other than what is pictured. I am unfamiliar with this item so please ask ... moreany questions. I do not see a makers name on it.
Buy It Now
Condition: Used Location: Bedford, United States But exceptions can be made.
Buy It Now
$1250.00 Shipping Condition: For parts or not working Location: Rancho Cordova, United States Software has error on load, due to the missing PCI card, we are unable to test further. The tray is damages during transport (please see photos for more ... moreinfo). For this reason, we are selling the unit AS-IS for parts/repair as a non-working or incomplete unit. We have not tested / inspected any further, item may have unknown issues we are not aware of. See all item photos for the condition of the unit. Unless pictured, no power adapter / power cable included. The unit is on hand and ready to ship.
Buy It Now
$12.50 Shipping Condition: Used Location: Clayton, United States Flange mounting coaxial protectors bolt to a flat surface and require no permanent hole. Device is DC blocked to stop DC continuity and accommodate all ... moreequipment types. Handles 50 kA max. surge current. Turn on voltage is a nominal 600V. Device turns on 2.5ns after reaching DC threshold. Capable of withstanding multiple strikes. Features aluminum enclosure and stainless steel hardware. Choose the protector which has the lowest throughput energy for the desired frequency. Mount Type Flange, Frequency Range 125 MHz to 1 GHz, Protected Side Connector N Male, Surge Side Connector N Female, Turn On Voltage 600 Vdc ± 20% VSWR ≤1.1:1 125 MHz to 1 GHz, Insertion Loss ≤ 0.1 dB, RF Power 125 to 220 MHz@ 375 W. 220 to 700 MHz@ 125 W, 700 to 1000 MHz@ 50 W,
Buy It Now
$19.07 Shipping Condition: Used Location: Largo, United States Payment Policy Brand New Sony CyberShot 8 MP Di NEW ICP CON I-7022 Data Acquisition Control 2-CH 12-Bit DAQ Analog Output Module Attention All Buyers ... moreIf there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description NEW ICP CON I-7022 Data Acquisition Control 2-CH 12-Bit DAQ Analog Output Module NEW Condition ICP CON I-7000 Series 2-Channel 12-Bit Analog Output Data Acquisition Module Converter/ Control Module Model: I-7022 In original box with instruction Guide Book Inventory Number: 2N93136-11-13 Item Condition New Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our
Buy It Now
Free Shipping Condition: Used Location: Mission Viejo, United States 20% Off Special! With its precision dispensing capabilities, it is perfect for adding solder paste, resin, or other materials to your PCBs.
Buy It Now
Free Shipping Condition: Used Location: Mission Viejo, United States 20% Off Special! With its precision dispensing capabilities, it is perfect for adding components to your PCBs.
Buy It Now
$92.25 Shipping Condition: Used Location: Bedford, United States These are from DS50KG-CAL kit 7 pieces Total. All used in good condition.
Buy It Now
$500.00 Shipping Condition: Used Location: Dallas, United States We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Electrovert Econopak Plus Wave Solder System ... moreModel# EPK PLUS/400F With Chemetronics Fire Suppression System Model# MICRO1-EV FEATURES: Model Number# EPK PLUS/400F, Manufactured By: Electrovert See Table Below For Specifications Estimated weight at ~5000 lbs. 189 by 69 by 84 inches raw CONDITION: Condition looks to be previously installed and complete to our knowledge. CA# 2783 NOTES: don't buy if. TERMS& CONDITIONS: LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink tubing, Electrovert is currently owned by. This model is considered obsolete however you can find on line to inquire about their current models and information. For more information about Wave Soldering please visit Wikipedia's entry at: Below is the majority of the information available for the Electrovert Econopak Plus System we have been able to locate through the Internet. We are not able to confirm the accuracy of this information as it is from a third party. General Specs Standard Power Sources: 220 VAC. 3 Phase, 60 Hz 440 VAC. 3 Phase, 60 Hz 380 VAC. 3 Phase, 50 Hz, Power Consumption: Basic System: EPK-I, 1
$40.99 Shipping Condition: Used Location: Leander, United States Glide-Line 300169. UniDrive brushless DC motor. UniDrive SCC-3. The belts look in in good condition. (1) Glide-Line 360511A_GLT_0009 Conveyor Set. Belt ... moreconveyor. Lab & Test. Adjustable height, adjustable position legs.
Buy It Now
Condition: Used Location: Largo, United States ACE KISS 103 Selective soldering system 2007 2 pots solder machine Powered by ACE KISS 103 2007 vintage Just released from military subcontractor in excellent ... morecondition. 2 pots Process viewing camera and monitor teach camera spray fluxer machine is extremely clean and lightly used. Manuals included service kit included Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI is a Florida Corporation who has been doing business since 1981. We are available 5 days a week from 8-4. Our main phone number is 407-822-4499. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and i
Buy It Now
Free Shipping Condition: Used Location: Belton, United States
Buy It Now
Free Shipping Condition: New Location: Roseville, United States The result is a high quality, tight fitting case that looks very good. We are thrilled with this enclosure. Support for SD card logging will be added ... moresoon. The software is open-source. You can read more about it on the Whizoo web site.
Buy It Now
$12.78 Shipping Condition: Used Location: San Diego, United States ZT-1-CLS-MIL AIRBATH, ANALOG. Ideal Pre-Heat for Lead-Free Work. What you see in the picture(s) is what you get nothing more nothing less. If fact it ... moremay have unknown flaws and deficiencies. the item has only been tested to the extent described in the item condition/testing notes.
Buy It Now
$19.60 Shipping Condition: Used Location: North Chelmsford, United States
Buy It Now
Free Shipping Condition: Used Location: Minneapolis, United States Loc 72.37 MS.
Buy It Now
Free Shipping Condition: Used Location: Spokane, United States Sale is for (3) Used Calmark Series 900 23" x 8-1/2" 20-slot PCB Holder/ Handling Tray -.
Buy It Now
Condition: Used Location: Phoenix, United States Air-Vac PCBRM15 Soldering FountainSelective Soldering ModuleDOM: 2017Mini-Pot for Through-Hole Rework, Selective Soldering and DesolderingPrecision Controls ... morefor Repeatability Lead Free (SN100c)Cast Iron PotTitanium Pump AssemblyIncludes alignment system board holder208V, 1PHFully Functional.
Buy It Now
Free Shipping Condition: New Location: Walpole, United States Part No |968A+. The NEW 968A+ only available from SRA Soldering Products has the following new features: 70 watt soldering iron with smoke absorber. The ... moreQuality and features available on this unit are the best in the industry.
Buy It Now
Condition: Used Location: Binghamton, United States All feeders are very light used with less than 100 production hours of use. These feeders feature a better design than the economy feeders that generally ... morecome with the SMT pick and place machine and will accommodate both plastic and paper tapes. I have a total of 42 of this style feeder for sale. If you want to buy all 42 as a package send me a message and I'll send you a quote for the package price.
$9.90 Shipping Condition: Used Location: Bay City, United States I don't know much about them. A spring-loaded Guillotine style cutoff tools with a very sharp blade. I can't imagine the hours they have in making these.
Buy It Now
Free Shipping Condition: Used Location: Las Vegas, United States
Buy It Now
Condition: New Location: Walled Lake, United States Pickup is fine. Before signing, remove the stretch film and inspect. Unit may need light cleaning. Let us arrange your freight at the best rate possible.
Buy It Now
Condition: Used Location: Marshfield, United States This Promation ECC-700 Conveyor is a reliable solution for streamlining your PCB assembly process. Its sturdy construction and efficient design ensure ... morethat your operations run smoothly, without any interruptions. With its compatibility with various PCB manufacturing equipment, this conveyor can seamlessly integrate into your current system.Whether you're running a small or large-scale operation, this conveyor can handle your workload with ease. Its robustness and flexibility make it an ideal choice for those looking to enhance their PCB assembly process. Get your hands on this high-quality conveyor today and take your manufacturing to the next level.
Buy It Now
Free Shipping Condition: Used Location: Tampa, United States This auction is for one Roto Form. Roto Trim model 272 Component Lead Trimmer in good working condition. The Trimmer has a continuous solid state speed ... morecontrol with a spindle speed that is variable to 10,000 RPMs. This is a current model and parts and cutters are available from Rotoform. This model currently retails for 4100.00. The auction includes 3 cutters with a value of over 400.00 in cutters and includes one serrated and two sharp edge cutters. The manual for the 272 is also available online as a pdf. on the Rotoform website. Different types of cutters are available from more than one source. The trimmer is designed for lead trimming of printed circuit boards but has many additional uses such as component shear for destructive testing. The Model 272 is designed for selective trimming of printed circuit boards. This design allows the operator to see the board as it is being trimmed and clear“see-through” shields and safety glasses protect the user. A cantilevered arm holds the rotating spindle and cutter. The arm is leveled relative to the base of the machine during the manufacturing process and, therefore, requires no adjustment. The height of the cut leads is adjusted by loosening the knurled nuts on the post supporting the arm. The Trimmer is 24” x 11.5” x 16.5” high and a weight of 50 lbs.Shipping. Packing and insurance is flat rate of 80.00 to the lower 48 states and will ship in two days of payment. BIN will include free shipping to the lower 48 states. Shipping outside the lower 48 states will be at cost. Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will require payment by wire transfer before shipping. USA and Canadian Buyers can use PayPal or wire transfer with time to clear. Invoice will be provided. Thank you
Buy It Now
Condition: For parts or not working Location: Burnsville, United States No Part/Model Nbr. Inline SMT. PCB Wave Input Conveyor. Being Sold "For Parts &/Or Repair" . Units Are As Pictured, Disassembled, With Cut Wiring.
Buy It Now
Condition: Used Location: Marshfield, United States With a DOM of 2003, it has been well-maintained and is still in excellent working condition. The hours of the unit are 14408hrs. cya15, cym14, bnd3, bnk2, ... morejyb15,eyb6 x3, eyb7, eyl6, eym6,eyl14, eym5.
Buy It Now
$17.99 Shipping Condition: Used Location: Largo, United States DART CONTROLS Inc. 125DV-W1233 VARIABLE MOTOR SPEED DRIVE BOARDMPN: 125DV-W1233120-240VAC INPUTALL ROMOVED FROM WORKING MACHINES (ELECTROVERT GOLD)USED ... more- IN GOOD WORKING CONDITIONLOC T5
Buy It Now
$17.00 Shipping Condition: For parts or not working Location: Hayward, United States
Buy It Now
$48.16 Shipping Condition: Used Location: Largo, United States MODEL NO: I24-1W1A1E-PA311A1X1A-X. USED - IN GOOD WORKING CONDITION.
Buy It Now
Condition: Used Location: Singapore Kindly let us know if you wish to use your own carrier/forwarder. Our Freight Forwarder is Crystal Freight Services. Cash and Carry for Local Sale only.
Buy It Now
$15.00 Shipping Condition: New Location: Atlanta, United States YASKAWA MOTOMAN JARCR-XOI01 REV.B SERVO BOARD. Condition is New. Shipped with USPS Ground Advantage.
Buy It Now
$30.49 Shipping Condition: Used Location: Leominster, United States
Buy It Now
$7.95 Shipping Condition: Used Location: Madison, United States 1996 Quad Systems Corporation PCB Pick & Place 5.31 AutoProgram Software - P/N 80-22407 (5) Disk Set.
Buy It Now
Condition: Used Location: Goffstown, United States Introducing the MyData MY12 Component Placement Pick and Place Machine, a high-performance solution for pc board assembly. This versatile equipment excels ... morein efficient production, capable of placing up to 20,000 components per hour with remarkable accuracy. With a robust single-sided platform, it supports both surface mount and through-hole components, accommodating large area array packages and small pitches down to 0201s. Enjoy customizability and easy operation through a user-friendly Windows interface. With low setup times and exceptional after-sales support, the MY12 is your reliable partner for all assembly needs. Optimize your manufacturing process today!.
Buy It Now
$19.07 Shipping Condition: Used Location: Largo, United States GZM-H25S24 POWER SUPPLY 24VP/N: GZM-H25S24176-264V /264V.4A MAX50/60 HzOUTPUT: 24V1.1AUSED - IN GOOD WORKING CONDITIONLOC I1-2
Buy It Now
Condition: For parts or not working Location: Gilroy, United States This Technical Devices Co. This unit requires 230 VAC 3 Phase 60 Hz power for operation. This unit was removed from a working lab, but has not been powered ... moreon at our facility. The cost of this pallet, as well as any required rigging, will be paid.
Buy It Now
$30.77 Shipping Condition: Used Location: Exton, United States Aoyue Int 9378 60 Watt Programmable Digital Soldering Station-ESD Safe
Buy It Now
$191.70 Shipping Condition: For parts or not working Location: Canada
Buy It Now
$1110.00 Shipping Condition: New Location: China Desktop Relow Oven IN6 ---- without stand version. Related SMT machine small pick and place machine NeoDenYY1+ small solder printer FP2636 to build up ... morelow cost smt line. Soldering width 260 mm. N.W./ G.W. 49KG/ 64kg (without working table).
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States PCB V-Cut Groove Cutting Machine. Height of Upper PCB less-than-equal 20mm. Height of Lower PCB less-than-equal 10mm. Inner Side of PCB Range less-than-equal ... more240mm. Thickness of Cutting Range 0.6mm~1.6mm.
Buy It Now
$18.46 Shipping Condition: For parts or not working Location: Ontario, United States X1 Aoyue 852A ++ SMD. It turns on and the numbers don't go up. Doesn't get hot. Parts or not working.
Buy It Now
$48.16 Shipping Condition: Used Location: Largo, United States CINCINNATI TEST SYSTEMS SENTINAL I24 PRECISION LEAK TEST INSTRUMENT WITH CABLESMODEL NO: I24-1W1A1E-PA311A1X1A-XP/N: I24-00105S/N: I242211120 VACBOTH ... moreCABLES INCLUDEDUSED - IN GOOD WORKING CONDITIONLOC OFF
Buy It Now
Condition: Used Location: Rochester, United States Model: M750S. Type: Solder Robot. The item is exactly as pictured. Item passed physical inspection and appears to be in working order.
Buy It Now
$15.62 Shipping Condition: Used Location: Webberville, United States Universal part# 52449233. Price is for each individual nozzle. need to arrange for pickup.
Buy It Now
$5.99 Shipping Condition: New Location: Dickson, United States CE150 Futura III, CE250 Futura III, CE350 Futura III, SES1000 Futura III, SES2000 Futura III.
Buy It Now
Condition: Used Location: Millersburg, United States This unit powers up. Heats and conveyor runs as it should. We are dedicated to understanding the unique challenges and opportunities that each industry ... morefaces. Country of Manufacture USA. LET'S STAY IN TOUCH.
Buy It Now
Condition: New Location: Clearwater, United States ULTRASOURCE ULTRAVAC 250 TABLE TOP VACUUM PACKAGING CHAMBER MACHINE - BRAND NEWMODEL NO: ULTRAVAC 250S/N: 3825120/60HZ13 AMPS20 GAUGE STAINLESS STEEL ... moreCONSTRUCTION 180LBS LOCAL PICKUP OR LTL SERVICE AVAILABLE AT OWNER EXPENSEBRAND NEW CONDITION - FACTORY SEALS STILL INTACTLOC FLOOR
Buy It Now
Free Shipping Condition: For parts or not working Location: Tucson, United States LPKF ProtoMat ?? PCB CAD/CAM Prototyping CNC Mill Cutting/Milling Machine ???. Used unit, pulled from local collectors estate. We honestly have no clue ... morehow to test, if its missing parts, or is needing repair, we are unsure the model. What you see is what you get. Parts or repair untested, no returns
Buy It Now
$14.97 Shipping Condition: Used Location: Largo, United States OMRON MK3P-I GENERAL PURPOSE RELAY 10A 250VACP/N: MK3P-I USED - IN GOOD WORKING CONDITIONLOC I1-2
Buy It Now
Free Shipping Condition: New – Open box Location: Canton, United States Wrist Band Six foot (9 ins non-extended). Silver impregnated polypropylene knitted band material is antimicrobial and provides better connection with ... moreoperator. Non-shedding, non-sloughing replaceable lightweight fabric band.
Buy It Now
$14.10 Shipping Condition: Used Location: Leominster, United States
Buy It Now
$10.77 Shipping Condition: Used Location: Swampscott, United States Tested on Universal Pick and Place Machine in Good Working Condition.
|
|
|
|
worth co. wire forming tool
you are biding on a wire formig tool made by the worth co. its in good shape. happy biding
|
|
|
Gibson 2737842 Gold Les Paul humbucking electric guitar pick up
See all! Up for sale is a Gibson 2737842 Gold Les Paul humbucking electric guitar pick up IT has some scratches on the front as shown in the photos below but works well Out of 7 of these this is the last one*Thank you for your interest in our auction*We have been selling on ebay since July of 2000 and appreciate the opportunity to do so*We do our best to answer our customers questions*If you have any questions feel free to ask them and if possible in a considerate time frame before the auctions end*We stive for 5* and customer satisfaction is important to us*If you are not satisfied with your item please email us and your email will be replied A.S.A.P. Items are shipped out on tuesdays.Thursdays and fridays*Auction includes only what is written in the ad or shown in photos*U.S. and Continental U.S. shipments only*Please email for Continental ... moreU.S. charges
|
|
|
UNGEWÖHNLICHE MUSIMA LEAD STAR E GITARRE MADE IN THE FORMER DDR 1A QUALITÄT
UNGEWÖHNLICHE MUSIMA LEAD STAR MADE IN THE FORMER DDR 1A QUALITÄT- ICH KANN GANZ EHRLICH SAGEN. DAS IST EINE DER BESTEN STRATS. DIE ICH JE IN DER HAND HATTE, SIE KLINGT, HAT EINE PERFEKTE SAITENLAGE UND SIEHT NOCH DAZU GANZ UNGEWÖHNLICH AUS, DIE WIRD MAN KEIN ZWEITES MAL FINDEN! LATTE MACCHIATO! o) UNGEWÖHNLICHE MUSIMA LEAD STAR MADE IN THE FORMER DDR 1A QUALITÄT. I CAN SAY IN ALL HONESTY. THIS IS ONE OF THE BEST STRATS I'VE EVER HELD IN MY HAND. SHE SOUNDS AWESOME, HAS PERFECT ACTION AND SHE LOOKS DELICIOUS! CAFE LATTE! o) DER VERSAND INNERHALB DEUTSCHLANDS KOSTET 15.00 EURO- DER VERSAND INNERHALB DER EU KOSTET 30,00 EURO- IN ANDERE LÄNDER BITTE ERFRAGEN. SHIPPING WITHIN GERMANY WILL COST 15,00 EUROS- SHIPPING TO COUNTRIES WITHIN THE EUROPEAN COMMUNITY WILL COST 30,00 EUROS- PLEASE ASK FOR THE COST OF SHIPPING ... moreTO ALL OTHER COUNTRIES. XXL XXL XXL XXL XXL Bewegen Sie die Maus über die Vorschaubilder. Ein Klick auf das gewünschte Vorschaubild öffnet die XXL-Ansicht in einem neuen Fenster.
|
|
|
Dell Latitude E4300 Motherboard Base Assembly w/ Extras D199R 2.4GHz
Dell Latitude E4300 Motherboard Base Assembly w/ Extras D199R 2.4GHz This item has been carefully handled. Tested Working 100% Motherboard has both no issues or passwords. Both memory slots working tested! Motherboard doesn't include optical drive. Memory, hard drive, battery and ac adapter. Motherboard does include 2.4GHz cpu. Cooling fan, heatsink, Wifi card, palmrest and base cover. Thank you for purchasing with us. If there are any problems please message us on eBay for immediate assistance. Our team will promptly reply in a very short time. Please do not open a case as it will not resolve anything but lower our seller rating. All serial numbers are recorded for warranty purposes. Thank you for your cooperation. Feel free to contact us anytime. We strive to provide maximum effort to service you and hope to receive your positive feedback. ... moreService Tag: JPBD4M1. Actual Picture If Item! 14 Day warranty money back guarantee. All Serial Numbers Are Recorded For Warranty Purposes. Eparts80 Inventory# NB 6311 3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fud.ro77%2861m25%3E3-13d2155b20e-0x10e-
|
|
|
Mid Century Modern Heavy Lead Crystal Glass Vase Funky Form 12.75" x 8" x 7" NR
Chester County Antiques Mid Century Modern Heavy Lead Crystal Glass Vase Funky Form!2.75" x 8" x 7" This auction offers you the opportunity to bid on a a super cool mid century heavy lead crystal glass vase in unusual form. It stands 12.75" high and is 8" by 7" in diameter/ No cracks chips or flaws in excellent condition. It is a very heavy lead crystal that weighs about 4-5 lbs. It is from an estate collection. FEEL FREE TO MAKE BEST OFFERS: on our fixed price buy it now listings. While we do entertain best offer buying. Please know that offers asking for 50% or more off are never enticing enough to accept. We set our prices fair and have some flexibility in discounting the sale price but offers must be reasonable in order for us to accept. Please be sure to search online for Chester County Antiques to read ... moreabout our company. Policies,shipping options, and more information. We have enjoyed eBay as one of our online sales channels for many years and will continue to do so for our longtime regular eBay buyers and new eBay buyers alike.Have fun bidding and help keep eBay a fun safe place to shop and to sell. Check out the other great items listed this week on our other auctions! Payments& terms: All payments are due within 4 days of auction ending. We accept PayPal. Major credit cards over phone processed on our own merchant account, cash on pick up, and other forms of payment. Call 610-692-2243 to inquire about other payment forms accepted. Winning buyer must contact us within 24 hours to acknowledge their winning bid by phone or responding to our email notification at end of auction. New eBay member with 5 or less feedback comments must contact us BEFORE bidding to verify understanding of potential shipping costs or intention of picking up. All furniture is to be picked up within 21 days of auction ending. There will be a $50 per month storage fee up to 60 days unless other arrangements are agreed upon Shipping: Pick up is always welcome and encouraged. We do not package large an
|
|
|
Matrox Solios XCL Y7184-01 REV. B
This card was removed from a PC following a retired engineering project. This card was functioning normally when removed and has been retested prior to posting and no issues were found. All electrostatic safety and handling precautions have been observed. This sale does not include any software or drivers but driver support can be found at the Matrox website. Shipping is via USPS standard with in the U.S. If other/special shipping conditions are needed please contact me to make arrangements.
|
|
|
Rat Bohemia Sarah Schulman Arsenal Pulp Press Modern & contemporary fict
Categories de la Boutique. Contact. Description. Rat Bohemia Sarah Schulman Arsenal Pulp Press Modern& contemporary fiction. Sarah Schulman's Rat Bohemia is a witty. Moving and sometimes shocking look at how lesbians and gay men are treated by their biological families. Set in contemporary New York, Schulman's characters-Rita, a rat exterminator who works for the city, Killer, a lesbian bohemian, and David, a gay writer with AIDS-are all trying to figure out how to live in a city that is falling apart and how to make peace with the families who ignore them or treat them badly. Schulman's eye for urban detail and her wicked, ironic sense of humor all contribute to making this a profoundly affecting and deeply disturbing look at lesbian and gay life today. Le Rat Boheme de Sarah Schulman est un plein d'esprit. Un deplacement ... moreet un regard choquant parfois a la facon dont des lesbiennes et les homosexuels sont traites par leurs familles biologiques. Placez a New York, les caracteres contemporain de Schulman-Rita, un exterminateur de rat qui travaille pour la ville, le Tueur, un bohemien lesbien, et David, un auteur gai avec le SIDA-sont tous qui essayent de figurer comment vivre dans une ville qui tombe en morceaux et la facon faire la paix avec les familles qui les ignorent ou les traitent mal. L'oeil de Schulman pour le detail urbain et son sens de l'humour mauvais et ironique tous contribuent a faire a ceci profondement une affectation et un regard troublant profondement a la vie lesbienne et gaie aujourd'hui. Caracteristique du livre: Titre: Rat Bohemia Auteur: Sarah Schulman Editeur: Arsenal Pulp Press Reliure: Broche Langue: Anglais Dimensions: 20.32 x 13,97 x 1,52 Nombre de page: 240 pages Poids: 272 grammes Date de parution: 08/05/2008 Mot Clef: Modern& contemporary fiction(post c 1945) Fiction- General American Contemporary Fiction- Individual Authors + Fiction Belletristik/ Romane/ Erzahlungen Fiction/ Lesbian General Literature of special Lesbian interest Modern fiction
|
|
|
2006 Air-Vac ONYX 29 SMT Production Rework & Assembly ONYX29 Rework Machine
Air-Vac Onyx 29 Rework Machine ONYX-29 2006 Vintage Serial# 003.03.065 3x208VAC 16A 60Hz 5800VA 6bar The new ONYX29 provides an unparalleled level of automation and process control for SMT rework and assembly. The new Tool Changer automatically selects and changes nozzles based on program instructions. The new Pick& Prep station provides automatic component pick up and preparaton including flux dipping. Paste on device and solder paste dipping. The new Process Development Wizard automatically creates a complete rework process based on user response to five structured prompts. Other key functions include fully automated non-contact site cleaning, force-controlled auto placement and motorized vision/zoom. ONYX29 Applications Lead-Free. 0201, Flip Chip, Micro BGA/CSP, MEMS, Optoelectronics, Microwave, MLF’s and other devices. Existing technology ... moreincluding BGA, CSP, Leaded Devices and Surface Mount Connectors can also be easily accommodated. Component Shuttle Provides a safe. Repeatable location for component pick up, flux dipping and drop off away from the heated work area. Eliminates manual component loading/removal in the heated work area. Software-controlled pneumatic shuttle enters the work area for pick up. Flux dipping or drop off, then exits the work area. Shuttle-based component pick up and flux dipping is set and monitored with machine force placement system. Multi-location pick and flux dipping capability for multi-processing of small devices(custom tooling required) Fume Extraction Manifold Removes flux vapors for operator health and safety. Includes fume extraction manifold and hose assembly. Requires connection to a central exhaust or self-contained filtering system. Four Additional Thermocouple Ports Key Benefits: 9 micron placement accuracy(0.0003” 3 Sigma High volume rework Ultra-fast heat up for Lead-Free Rework Fast. Controlled board cool down Process repeatability Uniform joint temperature Precision air flow Simple. Fast& easy to use software Large. Clear images for component alignment C
|
|
|
Universal GSM1 *upgraded* SMT Placement Same features/SW as UIC Advantis
Model: GSM1*upgraded* Vendor: Universal DOM: upgraded in 2005 Condition: Superior to inline with its age Cycles: 54M Facilities: 230V. 3ph, 30 amps Dimms: 66x86@ 7000 lbs PLEASE SEE CONFIGURATION REPORT ● UPS+6- windows software ● NPI Software- New Product Introduction s/w for quick set-up and minimal scrap ● Updated VME! Vision ESI-650H card. EPC-16 ● 42V and 24V feeder interface can accept latest and older UIC feeders ●(4) interchangeable precision locking feeder banks ●(1) Bank exchange cart for precision locking feeder banks ● FlexJet with 2.6mil/pixel camera- Front mount ● With these upgrades. Compare to AdVantis AX-7s ASK ABOUT OUR MACHINE ZEROING SERVICE(at additional price) A GSM1 that has been completely updated by Universal. ● Windows UPS+ with NPI software. ● Updated feeder interfaces and banks. ● Windows OS rebuilt VME. ● The ... moreperfect solution for high flexibility. Low cost, and up to date technology! NPI Software ● Scrap-free first article build ● Provides the ability to verify the complete production process: board. Feeders, fiducials, components, pre-placement x, y and theta data, and post-placement data FlexJet Head- The all-around performer The FlexJet Head quickly and accurately places components as small as 0201 up to 55mm square and 25mm tall with single field-of-view inspection. Gang pick up to seven components. C4/High force head- Unmatched flexibility and odd-form capability To handle your extreme application requirements. Programmable insertion forces from 150 to 5000 grams. Additional features include selectable placement delay and normal, medium and slow tact modes. Over ten years of selling experience on eBay has taught us that clearly stated policies and a clearly defined set of expectations between the buyer and seller lends to a higher degree of customer satisfaction and an overall better buying experience. Please take the time to review these policies. Item Condition Capital Equipment Exchange receives the majority of our items by way of industrial asset recovery programs.
|
|
|
ASYMTEK DUAL VALVE CONTROLLER CNC INTERFACE SOLDER PASTE GLUE DISPENSING
ASYMTEK DUAL VALVE CONTROLLER INTERFACE
|
|
|
C98876 Lot 4 Zevatech Pick and Place Parts Feeders (ETF8-5, 2x ETF8-6, ETF8-7)
C98876 Lot 4 Zevatech Pick and Place Parts Feeders(ETF8-5. 2x ETF8-6, ETF8-7) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C98876 This lot includes four Zevatech Pick and Place Parts Feeders. As shown. One is a model ETF8-5, two are model ETF8-6, and one is a model ETF8-7. They look to be in good cosmetic condition, showing some minor signs of wear. Three of them appear to be missing the belt connecting the motor to the pulley wheels at the bottom. The ETF8-7 is the only one that still has it installed(please see photos above for detail) I have no way of testing these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 7"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree ... moreto all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $18.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 7.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We
|
|
|
APR-5000-XL Array Package Rework System WITH 1.5 days Training
This system has been used in our production area for(4) years and is slightly used. This is the larger of the BGA rework systems offered by Metcal and features a multi-zone bottom heater(originally $48K) The reasons we are selling this is we have more than enough capacity on our other systems. Unlike a typical seller of used equipment we are subject matter experts on BGA rework and feature for sale not only this system BUT WILL INCLUDE 1.5 days of instruction to go along with the system. The training will take place on this machine and you will be trained on not only on how to operate the machine but also how to profile BGAs for rework. How to site dress, clean, inspect by somebody who teaches others these processes. The training will be conducted in the Chicago suburbs at our location and you will be responsible for all of your own expenses. ... moreWe can train you either on our boards or on your boards. Please do not ask for a discount if we do NOT provided the training) This is a perfect“package deal”for those wanting to get in to BGA rework with a decent machine for large boards as well as being taught how to use it. APR-5000 Array Package Rework System· 1) Metcal APR-5000 Rework Station· 1) Dell computer with monitor. Keyboard, mouse, and all required cables· 2) Board edge clamp rails with(4) clamps· 1) Board center support· 1) NZA 490-490 nozzle· 1) NZA 400-400 nozzle· 1) NZA 230-230 nozzle· 1) NZA 180-180 nozzle· 1) NZA130 nozzle· 1) NZA 80-95 nozzle· 2) Software installation CDs for the APR-5000 system(1) User's Manual System provides board capability with small board precision. This system performs precise. Cost effective rework of the widest range of PCBs and component types, from large boards up to 24.5" x 24.5" 622mm x 622mm) to components down to 0.020" x 0.010" 0.5mm x 0.25mm) The flexible APR-5000-XLS System incorporates dual stage pre-heaters and has the thermal capacity and control to execute precise profiles of both large an
|
|
|
Contact Systems TFS8 Smart Feeder 8mm Tape Feeder
This Sale is for a Contact Systems TFS8 Smart Feeder 8mm Tape Feeder. These look good but we can not test them. Came from a contract termination. Model: TFS-8· 8mm Tape Feeder SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. U.S. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. ... moreAnswering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However. USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Egypt. Libya, Indonesia, Pakistan, Russian Federation, Yemen. Argentina, Brazil, or V
|
|
|
T-Tech Quick Circuit 7000 S-E Prototype System
Auction Wizard 2000 Listing Template- AW2KLOT#1868 This auction is for a T-Tech Quick Circuit 7000 S-E Prototype. This item is used and has some scratches and scuff marks to its surface. The board and ports are in good condition. During storage this item was dented along its side(see pictures for those details) Otherwise. The item is still in solid condition. We do not have the remote for this item, and were not able to completely test it without it. Therefore, we are selling this item for parts and/or repair.
|
|
|
MIDAS POWER PCB ASSEMBY EPCB1-0027 CURCUIT BOARD
MIDAS POWER PCB ASSEMBY EPCB1-0027 CURCUIT BOARD NOT SURE IF THIS WORKS OR NOT THAT'S WHY ITS LISTED USED MAY BE GOOD FOR PARTS IF NOTHING ELSE We buy items from liquidations of supply and maintenance rooms at auctions. Items are described to the best of our knowledge and the pictures are the actual pictures of the item you will be getting. All items are sold as is and without warranty. This does not mean it doesn’t work. Only that we have no way of testing some items and has only been check out to the best of our knowledge. Please ask all questions before purchase. I ship promptly usually within one day after receiving payment. If you are unsatisfied with your purchase and need to return it notify me first with your problem and if it still needs to be returned the return shipping fees are the responsibility of the buyer and item must ... morebe returned within 14 days. JCLCF42013
|
|
|
Siemens 00341780 Turning System/DLM1 Siplace
1 pc. Siemens 00341780 Turning System/DLM1 Refurbished. Tested working. Ask for other Siplace spares/ software. New and used.
|
|
|
65.-Siemens Stern Montiert 00344772-01 (6 segments)
Up for sale: 65.Siemens Stern Montiert S/N: 00344772-01 Condition: The item is marked as"Used" I'm not sure if it's really used. The item is in excellent cosmetic condition. Untested. If you require more pictures. Please contact me. What's included? Just what is shown in the pictures. Shipping: To U.S. only. I'll try to ship as soon as I get the full payment. USPS + tracking# Payment: PayPal Only. Payment must be done within 3 days of purchase. Note: Due the lack of feedback. I'll only leave feedback once i got one from you. If you have any problem with the product please contact me, returns accepted within 14 days after you receive the item. Feel free to email me your questions. Check out my!
|
|
|
PCB Storage Cart Metro - PCB Universal Truck
Metro PCB Circuit Board Rack Cart in good condition. It includes 5 adjustable divider panels. We will dissassemble for and palletize for shipment. Buyer pays freight. 5 units available. Please contact me if you have any questions. Thanks for looking!
|
|
|
MCE IPS TES 8653D IC Chip Handler Pick & Place Setter
Search our eBay Store! MCE IPS TES 8653D IC Chip Handler Pick& Place Setter SKU: JV-JAM-C-MCE8653D Condition: Used Packaging: Pallet/Skid Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Unit Dimensions(L"W"H" 37*90*66 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject ... moreto FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, please contact us before leaving feedback or opening a case. Let us save you time& aggravation by showing you the true meaning of customer service! M-F. 10am to 6pm PST(California) Toll Free: 1-877-757-3863 BID WITH CONFIDENCE! We've been in business for over 10
|
|
|
NMA America Conveyor
NMA America Conveyor You are bidding on an NMA America Conveyor. The specifications for this machine are: Model Number: 5000-001-72671 Serial Number: PB-02230081195 Input Power: 120V. 1 Phase, 60 Hz, 13 Amp Dimensions: 95"L x 39"W x 25"H Front Fixed Rail Adjustable Rail Width(Manual) 14" Maximum PCB Width Vintage: 11/96 Omron C28K PLC Controller SMEMA Interface Asset Number: 5136 This machine is available for inspection at our facility in Mount Sterling. Kentucky, with appointment. Please contact Matt at 859.499.3455 or matt@easiky.com to schedule an appointment. Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. EAS personnel is available to answer any questions ... moreMonday– Friday, 8:00 am– 5:00 pm, EST. Machine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals, software, cables, etc. unless noted in the item description. All pictures are the actual photographs of the machine. We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality. EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or email matt@easiky.com. Payment Terms: Payment for equipment is exp
|
|
|
Systemation Q Corp QMT 1000 Tape and Reel SMT PCB Taping Accutape Series
Systemation- Q Corporation Accutape Series QMT 1000 Tape and Reel Machine For Sale Just taken off line in good running condition We have 2 systems available if interested in more than 1 Buyer is responsible for all shipping charges from our Boston. MA location We can skid. Package, crate, and set up shipping to countries overseas by boat or airplane. Let us know if you have any questions or concerns. Contact Bill at 978-790-2774
|
|
|
QUAD Pick and Place 24mm Feeder Good Condition
Quad Feeder 24MM Last time this was in a detachable feeder base it worked great. If you have any questions please contact me before bidding. shipping cost includes insurance*
|
|
|
Asymtek Automove 403 Dispensing System w/ A.F.C Group Auto-Rail & Base
Dalton. GA 30720 Asymtek Automove 403 Dispensing System w/ A.F.C Group Auto-Rail& Base, This auction is for an Asymtek Automove 403. The system is in good consmetic condition and was fully operational when removed from service. Since the item has not been tested. The 403 is sold as is. All photographed cables are included with the system. This item can be shipped through our freight carrier to any business with a dock or forklift in the contiguous United States. The flat rate shipping charge will be $350. If you would prefer setting up your own shipping arrangement please contact us before placing a bid. Please be sure to take a look at all our current auctions. And don't hesitate to ask us if you have any questions regarding any of our items. Payment: We accept PayPal. MasterCard, Visa, Discover and American Express. All in state ... moreresidents within our state will be charged 9.25% state sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Shipping: Packages are usually shipped within 72 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. Returns: All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 14 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we se
|
|
|
C98975 Virtual Industries Porta-Vac II Portable Vacuum Handling Tool w/2 Tips
C98975 Virtual Industries Porta-Vac II Portable Vacuum Handling Tool w/2 Tips(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C98975 This Virtual Industries Porta-Vac II Portable Battery-Operated Vacuum Handling Tool Kit(Kit No. PV4000-MW6) includes two tips and a flat-blade/allen-wrench adjustment tool. As shown. It looks to be in good cosmetic condition, except the screw for switching between"NiMH 9.6V" and"STD. 9V" batteries appears to be stripped. I installed a standard 9V battery into it, and it powered up just fine(you have to push the button down and forward) and pulled a vacuum, and the red power light blinks. It is shown in the pictures above holding onto a wafer(not included) with each of the tips, and it seems to work fine. Approximate overall unpacked dimensions: ... more11"L x 5"W x 2"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $15.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 1.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS A
|
|
|
Iteco 8301.103 County S Motorized SMD Component Counter
Iteco 8301.103 County S Motorized SMD Component Counter. The Manufacturer's Description. Iteco 8301.103 County S Motorized SMD Component Counter. Technical features: Display: 6 digits high efficiency leds Maximum counting speed: 100 pc/sec(1 piece per hole) Accuracy: ±1 piece Holes per component: from 1 to 99(factor division) Maximum tape height: 56mm Maximum reel diameter: 400mm Up/Down counting. Partial counting memory, Preset mode, variable feeding speed, step by step(1 component at a time) RS232C serial output for host computer or thermal label. Asset# 31096/BA Calibration. Additional Cost: TBD We can arrange for the calibration of your unit by an accredited calibration lab. If you choose to let us have your instrument calibrated. Please do not checkout until we have re-invoiced you. Contact Us. Please don't hesitate to contact ... moreus through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
|
|
|
HUGE LOT ALLIGATOR STEEL CONVEYOR BELT LACING TO LACE 12" FLAT BELT HIT MISS
HUGE LOT ALLIGATOR STEEL CONVEYOR BELT LACING TO LACE 12" FLAT BELT HIT MISS. Some still have original boxes with instructions must be enough clips here for close to 20 belts, Great find here.
|
|
|
Heller 932C Benchtop IR Reflow Oven SMT PCB
Heller Industries Benchtop IR Reflow Oven For Sale Serial Number: 089123 Model Number: 932C-H 3 Programmable top and bottom heating zones 12 inch Wide Mesh Belt Rapid Heat up Tim 480 Volt- 50 Amps- 60HZ Machine is missing the computer. Buyer is responsible for all shipping charges from our Boston. MA location We can set up domestic and international shipping. Please let us know if you have any questions or concerns. Contact Bill at 978-790-2774 dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13e04e1f7af-0xfe-
|
|
|
HIOS CLT-50 Power Supply & Hios CL 4000 Screwdriver
HIOS CLT-50 Power Supply& Hios CL 4000& Adjustable Torque Screwdriver in a very good cosmetic and working condition Please email with ZIP/Postal Code and country for exact cost of shipping. Look at my other listings. Thanks
|
|
|
OK INDUSTRIES SA 9 115 FUME SMOKE EXTRACTION SOLDERING
This sale is for a Laboratory Surplus OK Industries Sa-9-115 fume/ smoke extractor. In good working condition. Buyer to pay $11.35 for shipping. Feel free to contact me with any questions. Mark 916-761-6310.
|
|
|
EFD MODEL 1500 XL ADHESIVE DISPENSER
EFD Fluid Liquid Adhesive/Epoxy Glue Dispenser 1500XL 1500 XL 0-100PSI 6.9BAR Tested and working fine.Includes power cord.
|
|
|
Mydata VMF30 Vib Feeder Magazine
One Mydata VMF30 Vib. Feeder Magazine(Two Available) Inspection Call: Gary 970-214-0300.
|
|
|
Dell Latitude D630 Motherboard Laptop G86-621-A2 Independent
Dell Latitude D630 Motherboard Laptop G86-621-A2 Independent 2 months warranty Used.But looks 90% new 100% working Package Included: 1 X motherboard NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. ... moreFree Shipping items are our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LPKF C100/HF Protomat
LPKF C100/HF Protomat This PCB cutter will route and drill out single and double layer PCBs. Software available from LPKF. Its High Frequency Model capable of 100.000 RPMs for high frequency PCBs. This unit was used to make circuits on Rogers 5880, in the 50GHz range. Unit works. Though the unit may not be within manufacturers specification and may or may not require adjusting. Sell as is. Auction includes: LPKF C100/HF ProtoMat LPKF Air Management System 10x Magnifier-no pen light. But a 2AA Maglite is included Underlay material 6x of the 0.085" thick and 22pcs of the.104" thick material Copper PCB materials as follows: 1x approximately 9"x12" of the.010" RO4350 New 4x approximately 9"x12" 0.020" Arlon NEW 8x approximately 9"x12" FR4 1oz copper double sided 0.059" thick NEW Drills. Endmils ... moreand cutters are mostly all used, but a few might be brand new. Drills: 9 each 0.2mm drills 16 each 0.3mm drills 15 each 0.4mm 10 each 0.5mm 20 each 0.6mm 4x 0.7mm 28 each 0.8mm 9 each 0.9mm 5 each 1.2mm 34 each 1.3mm 5 each 1.4mm 6 each 1.5mm 9each 1.6mm 20 each 1.8mm 2 each 2.3mm 5 each 2.93mm 1 each 3mm Endmills 47 each 6mil.most of these were out of spec and cut and 7mils 19 each.25mils 4 each 15mil 37each 1mm 6each 79mil 12 each Fine line cutters 2 boxes of a mixed bits 12 universal cutters 7 each of 2mm DD Routers 10 each 1mm DD Routers
|
|
|
Motorola MVME-316 VME VMEbus-I/O CH Interface Board
Search our eBay Store! Motorola MVME-316 VME VMEbus-I/O CH Interface Board SKU: TER-C-MVME316 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Motorola MVME-316 VMEbus-to-I/O Channel Interface Module Board P/N: 01-W3336B-01A Unit was pulled from working environment. Dimensions(L" x W" x H" 10 1/4* 7 3/8* 3/4 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and ... morelocal regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, please contact us before leaving feedback or opening a case. Let us save you time& aggravation by showing you the true meaning of customer service!
|
|
|
3 Europlacer Progress 6 Placement Machines SMT PCB Pick and Place
3 Europlacer Progress 6 Pick and Place Machine just taken out of Surface Mount Manufacturing Company. See attached pictures and information below. Europlacer Placement Machine. Model Number: Progress 6. Min/Max Board Size: 50 x 50 x 0.5 mm- 500 x 460 x 5.0 mm Component range: 0402 to 50 x 50(12 mm max. Component height) Max. speed: 6000 components per hour. +/ 0.100 mm Accuracy for Chips. +/ 0.060 mm Accuracy for QFPs 4 Nozzle Turret Head. Auto Nozzle Changer. 6 Feeder Zones. Feeder slot Capability: 198 230 Volt- 50/ 60 HZ- 1 Phase. CE Marked. Dimensions: 2.1 x 1.4 x 1.8(m) Weight: 1.300 kgs. Cost to package the 3 machines and load into 40 foot sea container is $2.500. Estimate cost to ship to the UK is $2.200 depending on exact location. Buyer is responsible for all shipping charges from our Boston. MA location. We can package. Vacuum pack, ... moreskid, crate, and set up shipping to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact: Bill 978-790-2774.
|
|
|
Multitroniks LVX Pick and Place Machine
For sale is a Multitroniks LVX Pick and Place Machine. This unit is in good condition and is working and producing boards. We have done production units with this machine and it can reliably do parts down to 0603. Sot-23, 8 soic and 100 pin QFP chips as well as other footprints in this range. I believe it has a manufacture date of 2000. It works good and includes everything you need to start building boards It will be shipped freight with 1 large pallet for the machine ~1500 lbs and the feeders. Etc on a separate pallets. Includes: Pick and Place Machine 3 vibratory feeders on the machine 8 nozzles(various sizes) Horizontal laser for part alignment Downward looking camera for teaching and fiducial correction Upward looking camera for alignment Video Monitor for Camera Monitor for PC Onboard PC with pick and place software Cloned hard drive ... morefor back up of pick and place software User Manuals with schematics Spare feeder parts Working Feeders: 34x-8mm. 4x-12mm, 2x-16mm Non Working Feeders(most need minor repair and probably could be made working from spare parts box) 39x-8mm feeders. 6x-12mm, 1x-16mm, 2x-24mm video of the unit running:
|
|
|
PANASONIC FEEDER 8 X 2 PAPER, DOUBLE, M SIZE, K TYPE, P/N 1049556000 ( USED )
THIS SALE IS FOR A USED BUT FUNCTIONAL PANASONIC FEEDER 8 X 2 PAPER. PART NUMBER 1049556000, K TYPE. M SIZE, DOUBLE.
|
|
|
ASM TECHNOLOGY SNAP CURE OVEN IB109
THIS IS A ASM TECHNOLOGY SNAP CURE OVEN MODEL IB109. 240V. DATE 05/95. SERIAL IB1904-10. UNIT LOOKS IN GOOD CONDITION CAME OUT OF A WORKING ENVIRONMENT. =============. Shipping on this item is 350.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item.
|
|
|
DELL INSPIRON 1545 LAPTOP MOTHERBOARD INTEL Independent
DELL INSPIRON 1545 LAPTOP MOTHERBOARD INTEL Independent 2 months warranty Used.But looks 90% new 100% working Package Included: 1 X motherboard NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. Free ... moreShipping items are our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MPM SPM semi automatic stencil printer
Very good condition MPM SPM semi automatic screen printer with underside wipe capability. Please inquire with questions. Unit will also come with one set of squeegee blades
|
|
|
Heller D276-36A High Volume Lead Processing System
Heller D276-36A DIP Lead Processing System When recently tested. Powers on and fully functional. This unit is cosmetically good with no signs of abusive wear. Any questions please send them and I will be more than happy to try to assist you. Free shipping is only valid within the Continental U.S. International Shipping can be arranged at the Buyer's cost Good Luck Bidding
|
|
|
Electrovert Econopak 229 Wave Solder Machine with wavedynamics
Electrovert Econopak 229 wave solder machine. Foam fluxer, bottom preheaters, 15" wave, 220v 3ph with wavedynamics. Unit was purchased just before 9-11-2001 from used equipment reseller and initially setup. Never used. The unit has been in storage ever since. Unit can be purchased with or without base cabinet. Unit is somewhat disassembled for easier shipping. Contact seller for arrangements or local pickup. Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup.
|
|
|
Camalot 1818 paste/glue dispensers, complete w/vision,computer, 2 disp. heads
This is Camalot 1818(model 3952) solder paste and glue dispenser. Fully functional, complete with computer, track ball, vision and monitor, user manual. SN 126 Mfg 02/90 This unit is in excellent condition we have powered it up and tested and have a video of it functioning on request. Easy track ball movement and control and you would be surprised what these could do even in the 90s, I was! XYZ axis You can program circles,not sure if itll do cork screw, but it can do 1 circle inside of another, itll do lines,dots etc. you can program it to move up and over components, and choose the path etc. Teach Accuracy +- 002 in. Repeatability +- 001 in. 120v requires 80 psi. Skidding and wrapping an additional $200.00.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e1781a799-0xfc-
|
|
|
DELL Inspiron N5010 Laptop motherboard independent 1GB
DELL Inspiron N5010 Laptop motherboard independent 1GB 2 months warranty Used.But looks 90% new 100% working Package Included: 1 X motherboard NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. Free ... moreShipping items are our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e1781a72e-0xf1-
|
|
|
DI Filtration System, Closed Loop, 5Hp Pump
This unit has been powered up and tested. Mfg Seperation Technologies Model ST200 DI filteration system. 3 stainless steel resin tanks, 2 large particle filters, 5 hp pump system, DI resistivity meter, heated water system 208 single phase, 28 Amp. Manual included. There is an evaporator that came with this unit available seperately.FOB Minden Nevada, 89423. We can skid and wrap this unit and load it on a truck. Skid will be 42" x 36" we are guessing around 500 l bs.
|
|
|
Matrox Meteor II MultiChannel Y751-0301 REV. B free ship
Matrox Meteor II MultiChannel Y751-0301 REV. B Shipment We will ship your order within 2 business days via post airmail. It will usually take 10-20 business days after shipment. Return Policy We carefully inspect the item before shipment. In case you found a defect on the purchase. We will exchange or refund it Contact Us We are willing to respond to your inquiry If you have a question or problem.Please contact us first. It is the fastest way to settle your concern or issue
|
|
|
AMISTAR MODEL AI-500 AXIAL INSERTER
AMISTAR MODEL AI-500 AXIAL INSERTER S/N:425894 THERE ARE TWO UNITS PICTURED and AVAILABLE BUT THIS AUCTION IS ONLY FOR THE ONE UNIT DESCRIBED ABOVE. S/N:425894 ITEM IS UNTESTED AND SOLD AS IS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Eun IL Passageway Conveyor EPC-300
Eun IL EPC-300 Passageway Conveyor Mfr Info page at http:www.eunil.co.kr/eng/sub02_03_s7.html?la=2&code=03 Item is for local pickup but I will palletize it for shipment and deliver it to a local shipper in the Boise area. Call Mike at 208-559-1924 for questions.
|
|
|
Rudolph Technologies 20702A Lock-In Amplifier PCB working
This Rudolph Technologies lock-in amplifier board is used. Working surplus. The physical condition is good and clean. Model No: 20702A Serial No: R001800160 Condition: Working. 90 Day Warranty. Estimated Packed Shipping Dimensions: L x W x H = 10" x 10" x 10" 4 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 4 Can't find the answer you're looking for? contact us! ... moreBusiness Hours: 8am to 5pm MST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling(possibly longer for freight items) All tracking information is forwarded to the email address associated with your PayPal or eBay account. Same Day S
|
|
|
Asymtek Century C-708 Automated Fluid Dispensing System
Asymtek Century C-708 automated fluid dispensing system with DV-6221 positive displacement rotary pump needle height sensor and NS needle sensor vision system 18" x 18" dispensing area Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: I do my best to ship items in 3 business days after payment is received. I do combine shipping on most items where possible. Freight shipping quotes may take a little longer. E-mail any questions about freight shipping prices. We can build custom pallets and crates for an extra charge. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is ... moreunless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Dell Inspiron 1564 Integrated motherboard
Dell Inspiron 1564 Integrated motherboard 2 months warranty Used.But looks 90% new 100% working Package Included: 1 X motherboard NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. Free Shipping items ... moreare our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MPM UP3000 Printer Tactile Sensor Assembly
MPM UP3000 Screen Printer Tactile Sensor Assembly Contact Bill at 978-790-2774 with any questions.
|
|
|
Cencorp TR2000 Depanneler TR 2000 PCB Router PC Board SMT
Cencorp PC Board Router For Sale Model Number: TR2000 Serial Number: 554 Just taken out of SMT Company which closed down Includes manuals. Software discs, along with accessories. See attached pictures Buyer is responsible for all shipping charges from our Boston. MA location. We can skid. Crate, package, and ship to countries overseas by boat or airplane. Let us know if you have any questions and we will answer Contact Bill at 978-790-2774
|
|
|
Samsung CP-40CV SMT Placement System High speed with Wide component Range
This Samsung CP-40CV Pick and Place is completely reconditioned and upgraded it is sold with a guaranty of functionality. Depending on your location we can assist with installation and equipment training if needed. Break Your Production Barrier Without Breaking Your Budget! The Samsung CP40C offers the best price/ performance benefits in its class. With a placement rate of up to 13,800 CPH. The Samsung CP40CV combines high-speed production capacity with fine pitch QFP. BGA and μ-BGA inspection and placement capabilities. The CP40C and CP40CV are equipped with a Windows-based GUI operating system. 3-stage conveyor for optimum PCB transport time and non-contact touchless component positioning systems.
|
|
|
Siemens SIPLACER 1846 S15 Head
Siemens SIPLACER 1846 S15 Head. The Manufacturer's Description. Siemens SIPLACER 1846 S15 Head Asset# 32864/BA Contact Us. Please don't hesitate to contact us through eBay. Skype, MSN Messenger, or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-8250 Email: Danny@R1Source.com Skype ID: shankara.shivagana Windows Messenger ID: webmaster@wesource.com Office Phone# 858) 693-1991 Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return ... moreshipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
|
|
|
Automation Technologies Industries Conveyor
ATI Conveyor You are bidding on a ATI conveyor. The specifications for this machine are: Manufacturer: ATI Description: 2 Person Double Sided Workstation Input Power: 100/115V. 50/60 Hertz Dimensions:56" Length x 48"Width Features: 8 1/2" Maximum PCB Width. Edge Rail Conveyor, In Line, Fluorescent Overhead Lighting, SLC 500 PLC, Adjustable Speed Control, ESD Wrist Strap(2) 45" x 15" Work Surfaces Asset Number: 5053 This machine is available for inspection at our facility in Mount Sterling. Kentucky, with appointment. Please contact Matt at 859.499.3455 or matt@easiky.com to schedule an appointment. Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. EAS personnel ... moreis available to answer any questions Monday– Friday, 8:00 am– 5:00 pm, EST. Machine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals, software, cables, etc. unless noted in the item description. All pictures are the actual photographs of the machine. We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality. EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or email matt@easiky.com. Pa
|
|
|
Juki KE-750L Pick & Place High-speed flexible chip shooter Large Board ; Feeders
Juki KE-750L pick and place High-speed flexible chip shooter Includes 20 Feeders Large board size: 14" x 16" Three-head laser alignment system Using three high-density laser heads. The KE-750 places components from 0201 chips up to 23.5 mm square components. Tape, stick and tray feeders are compatible with KE-760 machines. 200 Volt 2.5 kVA 1 phase 50/60 Hz Serial# may vary Buyer is responsible for packaging and shipping We can build pallets or crates for an additional charge Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are ... morenot accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Varian 947 Leak Detector
SN 0106 This Varian Leak Detector is in perfect working order and has been calibrated in last year. It has newer oil vacuum pumps. Instead of dry pumps, since it wasnt being used in a clean room environment. We got tired of rebuilding the dry pumps that come with it, every year. The units working great and more efficient and hassle free, just not recommended for some clean room environments. I can band and skid this machine for pick up in Phoenix. We estimate it to be around 300 lbs Also can do video of final test for buyer
|
|
|
MRC Eclipse Materials Research Corp. 885-11-000 POS. PCB Rev. D working
This MRC POS PCB is used. Working surplus. It was removed from a MRC Eclipse Star tool. The physical condition is good and clean. Model No: 885-11-000 Rev.D Condition: Working. 90 Day Warranty. Estimated Packed Shipping Dimensions: L x W x H = 14" x 14" x 14" 6 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 4 Can't find the answer you're looking for? contact us! Business Hours: 8am to ... more5pm MST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling time(possibly longer for freight items. All tracking information is forwarded to the email address associated with your PayPal or eBay account. Same Day Shipping Policy. Con
|
|
|
Nikon PCB Control Board SH-SNS 4S018-907 Used Working NSR-S307E
This Nikon Control Board is used working surplus. The physical condition is good and clean with minor scratches from use and handling. Model No: SH-SNS 4S018-907 Removed from Nikon NSR-S307E, D40203 Made in Japan, Condition: Used. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 12 in. x 12 in. x 12 in. 1 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 5 Can't find the answer you're ... morelooking for? contact us! Business Hours: 8am to 5pm MST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 6.75% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling time(possibly longer for freight items. All tracking information is forwarded to the email address associated wit
|
|
|
Kniel 4022-436-86882 Control Card CPD 8.1,5/1 working 319-004-04 ASML
This Kniel power supply is used. Working surplus. It was removed from a ASML System. The physical condition is good and clean. Type No: CPD 8.1.5/1 Model No: 4022-436-86882 Serial No: 15620274 A-No: 319-004-04 Input: 230V +15/20% 45-440Hz, 0.5A MAX. CE marked Made in Germany Condition: Working. 90 Day Warranty. Estimated Packed Shipping Dimensions: L x W x H = 12" x 12" x 12" 6 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See ... moreDetails Below) Lister 4 Can't find the answer you're looking for? contact us! Business Hours: 8am to 5pm MST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling time(possibly longer for freight items. All tracking i
|
|
|
TREK Triton I SMT Inline Cleaner
Trek Triton 1 SMT Inline Cleaner Serial# T1/100/850 DI Water Wash Fine Mesh Belt Sump Pump Drain 14" wide conveyor 460 Volts 3 Ph. 61 F.L. Amps 60 Hz Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets and crates for an extra charge. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will ... moremake it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
OK Ind. MP-2001 Series 2000 BGA Fine-Pitch Micro Placer w/MPPS-1 Power Supply
Item up for sale is a: OK Ind. Model No. MP-2001 MP Series 2000 BGA Fine-Pitch Micro Placer w/Model No. MPPS-1 Power Supply Item is used and is untested other than what is indicated below: 1 cord coming from Power Supply has been cut and is missing plug adapter. See Pictures. If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. 58 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. ============================================================================ Terms of Sale: Payment Options: PayPal only or contact us for payment methods to pay on pickup. Bank transfers or payments using a ... moreCashier’s Check may be available. Contact us for additional information and fees. RETURNS: Warranty for Items shipped in the US 14-Day Right to Return- Buyer has 14 days to test item to determine its operational condition unless it was listed as Parts-Only or As-Is. Should the item be received non-operational you may return the item for refund of the purchase price. 14-day period starts the day you receive the item. You cannot return an item because it is not compatible with the system you installed the item into. Please insure that the item you are purchasing is compatible with the application or in the system you intend to use it. Warranty for Items shipped outside the United States All international sales shipped to a destination outside the US are non-refundable. All international sales are final. SHIPPING: Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by Ebay) to estimate shipping charges. Actual FedEx ground rates may be cheaper than UPS depending on the destination, so for heavy pa
|
|
|
General Production Devices GPD Micro-Dot Valve Paste Dispenser & Cleaner Kit
GENERAL PRODUCTION DEVICES GPD MICRO-DOT VALVE PASTE DISPENSER Includes SMC Corporation of America Cylinder NCJ2B10-200 Air Cylinder. Stainless Steel Needle Cleaner Kit Misc. O-rings Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Presumed good. But untested. We do not have the expertise to test further. This means that this item is being sold as-is, as-pictured with the assumption and understanding that there may be unknown defects. Comes with a 14-day right of return. Local pick-up available. Reference#35664 SALES TERMS AND CONDITIONS: Only items pictured are included. If a part is not pictured. Or mentioned in the description, then it is not included in the sale. Place a bid only if you are serious about purchasing the item. If we(the Sellers) are unable to establish contact with the winning bidder within 5 days ... moreof the end of the auction or if payment is not received within 5 days. The item(s) will be re-listed at our discretion. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. PAYMENT TERMS AND CONDITIONS: Payment is due within 5 days of end of the auction. FREIGHT Items: Please wait for an invoice with actual shipping charges before paying. We accept: PayPal. Visa, MasterCard, and Bank Wire Transfers(T/T) in USD. There is a $25 wire transfer fee. Sales Tax applies to CALIFORNIA buyers or provide a Resale Tax ID for our records. We cannot process the order until we receive sales tax or a copy of your Resale Tax ID. SHIPPING DETAILS: All items will be securely packaged or palletized/crated and shipped via the best and most economical way possible. All tracking information is forwarded to the email address associated with your PayPal or eBay account. DOMESTIC SHIPPING: A contact name and phone number. Along with company name are required for shipping purposes. Items sold for $250 or more will be sent via UPS or FedEx with signature required for delivery. UPS and FedEx do not deliver to P.O. Boxes. In the event the bidder/buyer woul
|
|
|
PC board assembly cart / rack
4 wheeled PCB cart/rack adjustable width. For up to 18" wide boards 5' high three available satisfaction guarantee
|
|
|
Universal Instruments Axial Inserter 6287A Axial Insertion Machine
Universal Axial Inserter 6287A axial insertion machine Stand alone single head adjustable fixture BEC Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets and crates for an extra charge. Returns: Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please ... moretalk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
FUJI GLV Glue Dispenser GL5 SMT PCB Adhesive GLV-5000
FUJI GLV Glue Dispenser For Sale in Good Condition See attached pictures and information below. Equipment Description FUJI Glue Dispenser Model Number: GLV-5000 Serial Number: 869 year: Aug 1994 Max: PCB Size: 20 x 18 27.500 DPH Capability Vision System Ensures adhesive dot volume process control Temperature control to ensure stable viscosity Buyer is responsible for all shipping charges from our Boston. MA location. We can package. Crate, and set up shipping to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill at 978-790-2774
|
|
|
DEK 249 Screen Printer
Available is a DEK 249 Semi-Automatic Screen Printer. Additional information on the machine is below: Manufacturer: DEK Model Number: 249 Serial Number: 2495MDUK63284-01 Input Power: 220V Asset Number: 5389 Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. EAS personnel is available to answer any questions Monday– Friday, 8:00 am– 5:00 pm, EST. Machine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals. Software, cables, etc. ... moreunless noted in the item description. All pictures are the actual photographs of the machine. It is safe to assume if you do not see something in the photographs. It is not included with the machine. We have a large variety of equipment and machines available. It is possible we have additional spare parts. Manuals, etc. that are not advertised with machine- please ask and we will check! We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality and has not made any necessary repairs(if any are needed) EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or email matt@easiky.com. Payment Terms: Payment for equipment is expected within three
|
|
|
Pillarhouse Ruby 1 S/N RB036 Selective Soldering Machine *VERY NICE*
Pillarhouse Ruby 1 S/N RB036 Selective Soldering Machine*VERY NICE* Constructed in 2001. And Certified Thru 9/13/2012. 208V 12KVA Air = 6 BAR Nitrogen = 3 BAR Included with this machine are monitor/video cables and it does have cabinet and start-up keys. Although a monitor and keypad are NOT included. This machine is in VERY good condition. And has been professionally setup for shipping. All moving parts have been strapped for safety, and prior to shipping, we will be completely crateing for a more secure travel. Because of the ever changing of customs between countries, PLEASE CONTACT US PRIOR TO PURCHASE. For shipping quotes and arrangements for all international sales. This listing is for(1) Pillarhouse Ruby 1 USED. Pallets213 121245000JB/TT Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless ... morea proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
|
|
|
Universal GSM 24mm Multi Pitch SMT Feeder
Universal GSM 24mm Multi Pitch SMT Feeder Many other sizes also available. Product Features and/or Part Number: Pictures are of actual items and are part of the auction description. Condition: Good condition. Box Condition:No original box unless stated. Shipping: I do my best to ship items in 3 business days after payment is received. I do combine shipping on most items where possible. PACKAGING& SHIPPING: SHIPPING/DELIVERY OPTIONS: Option 1: LOCAL PICKUP: Free. No handling charges. Option 2: The buyer make his/her own freight arrangements and pay the shipping cost directly to the freight company they choose. PFI will package for shipment and coordinate with buyer for payment for packaging. Ship via UPS Shipping weight and dimensions, approximate: DIMS: WEIGHT: Approximate weight 20 bs. Shipping to Alaska, Hawaii, Puerto Rico and Guam ... moreare available, buyer to pay additional shipping costs unless item fits in a flat rate box. I will ship to P.O. box if item is not too heavy and can be shipped USPS. International shipping is available on most items, please ask before bidding. Insurance: Insurance is included on Fedex and UPS shipments. USPS flat rate shipping does not include insurance. Buyer must request and pay additional cost of insurance. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Communication: We respond to emails i.e. questions, offers, shipping etc. everyday. Some quotes on shipping may take a little longer. Shipping info will post on your My Ebay-View Order Details page as soon as item is shipped USPS. If Fedex is used you will receive an email from Fedex with the tracking info. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns, issues or problems before leaving feedback and give me that
|
|
|
STB SYSTEMS INC 210-0213-001 2MB VIDEO CARD LIGHTSPEED
YOU ARE BUYING ONE STB SYSTEMS INC 210-0213-001 2MB VIDEO CARD LIGHTSPEED. 1X0-0422-004. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN HONEYWELL FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G2PCB) Estimated Retail Price: $115.00 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my other items! Be sure to add me to your favorites list!
|
|
|
Dynapace C17065 Workstation/Inspection Conveyor
Dynapace C17065 Workstation/Inspection Conveyor. The Manufacturer's Description. Dynapace C17065 Workstation/Inspection Conveyor 1-Meter max board size is 18 inches. Asset# 109483/BA Contact Us. Please don't hesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking ... morefee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
|
|
|
DELL INSPIRON 15R N5010 M5010 AC DC JACK USB PLUG SOCKET power board
DELL INSPIRON 15R N5010 M5010 AC DC JACK USB PLUG SOCKET power board 48.4HH02.011 Ship with tracking number! Package Included: 1 X power board NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. Free ... moreShipping items are our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
QUAD 3C 4C Pick and Place machine 8mm Slim Feeder excellent condition
This is a new design 8mm Slim feeder for QUAD 3C/4C Pick and Place machine. Work great and in excellent condition. Thank you!
|
|
|
Asymtek 1010 Dispenser Underfill SMT PCB Asymtek 1020 Nordson
Asymtek 1010 Axiom Dispenser For Sale- Very CLEAN- Low Use! We have powered up the machine and reset. Everything is working. The machine does not currently have a dispense pump or camera. See attached pictures and information below. Equipment Description Asymtek Model Number: X-1010 Serial Number: X11828 Year 2003 Windows NT Operating System Asymtek Fluid Flow Software Version FmNT 4.7.1 Left to Right Flow Pass Thru Conveyor System Weight Scale Computer Controlled CE Marked 208-220 Volt- 50/60 HZ Recommended Applications from the manufactures website Underfill for flip chip and chip scale packaging Chip Encapsulation Dam and Fill Solder Paste Thermal Compounds Jets a wide range of fluids including underfill. SMA, encapsulants, conformal coating, UV adhesives and silver epoxy Fast- jetting eliminates z-axis motion Accurate- jetting is highly ... morerepeatable Easy to use and maintain Small wetted path so less fluid is wasted One model handles multiple applications Dot diameter as small as 200 micrometers(0.008 in. We can skid. Package, crate, and ship to countries overseas by boat or airplane. Buyer is responsible for all shipping charges from our Boston. MA location. Please let us know if you have any questions or concerns. Contact Bill at 978-790-2774
|
|
|
T-Tech Quick Circuit 5000 PCB Building System; Lots of extras READY TO BUILD PCB
Used In Home. Slightly. Works Perfect! Everything you need to start fabricating multilayer printed circuit boards. I will even include the 2X3X4' shelving. 1. Quick Circuit 5000(with 4mil trace and space capabilities) 2. AMC 2500 Servo controller for Quick Circuit 5000 table. 3. BMR German made High Speed Spindle controller. 4. Spindle Z Air controller(better than electric solenoid) 5. Toshiba Tecra 8200 Laptop(works perfect for devoted to system. One note here; battery only last 15 minutes. I use it plugged in. So not an issue. 6. Campo Hossfeld 2 Gallon Compressor(for Spindle control) 7. T-Tech Hepa Vacuum. 8. Wide variety of tools. Hundreds of dollars in endmils. Router bits, drills. 9. Never been used copper Plating Tanks and Power Supply! 10. All the software needed and dongle for license. ISO Pro 11. All the original Documentation ... moreand Instructions to operate all equipment. 12. several 2x3 FEET dual sided bare copper sheets THIS PACKAGE NEW COST OVER $21.000 If you want to be up and running. With nothing more to buy, THIS IS THE SYSTEM to get. Shipping will be freight and must be arranged cost is paid by buyer. Contact must be made prior to payment! Posted with
|
|
|
HP Compaq ZD8000 laptop motherboard 374711-001
HP ZD8000 374711-001 laptop motherboard 2 months warranty Used.But looks 90% new 100% working Package Included: 1 X motherboard NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. Free Shipping items ... moreare our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ungar 4700 SMC / IC Removal Reflow Station
For sale is a used Ungar 4700 s/n 4700520 SMC/IC Removal refow station. You get what you see in the photos only. Nothing else included. No nozzles. We have no history with this system or any like them. We purchased at a surplus equipment sale. We will pack for shipping. Buyer pays for shipping. Thank you for looking.
|
|
|
Fuji CP6 Feeder 24 x 12 SMT PCB WE-2412
Hello and thank you for your interest in our FUJI Feeders. This listing is to purchase(1) 24 x 12 Fuji Feeder- Part Number Noted is WE-2412- These work on FUJI CP Pick and Place Please note the pictures and that the feeders are in good condition. Please contact us for quantity discounts and let us know if interested in any other sizes. We can package and ship to countries overseas. Buyer is responsible for all packaging and shipping charges from our Boston. MA location. Contact Bill at 978-790-2774
|
|
|
VERSALOGIC-PC/104-PLUS EBX AND SUMIT EMBEDDED
VERSALOGIC-PC/104-PLUS EBX AND SUMIT EMBEDDED Description. Versalogic-PC/104-Plus EBx And Sumit Embedded. C3413-000-00001 WO# 24330, Versalogic Corp. P-EPM4, This Item Was Taken Out The Bag While It Was In Storage Shipping. All items sold will be shipped through the usps or ups ground determine which is cheaper for buyer shipping charges are ONLY for lower 48 states. Anywhere else please contact us for quote
|
|
|
HONEYWELL MATROX MGI QID-E128LPA EXPRESS VIDEO CARD
Used HONEYWELL MATROX MGI QID-E128LPA EXPRESS VIDEO CARD.
|
|
|
National Electronics NL10254 Magnetron
National Electronics NL10254-4 Magnetron Description For sale is a National Electronics NL10254-4 Magnetron. The unit was removed from a working environment and is in good used condition. Item is guaranteed non-DOA and covered under our 14-day return policy. Auction Includes: National Electronics NL10254-4 Magnetron Only items pictured are included. If a part is not pictured or mentioned in the description then it is not included in the sale. If you are unsure about any aspect of this item please send an email and ask questions before bidding. We do offer combined shipping discounts and free local pickup. Email for details. OceanTech WE BUY& SELL IT EQUIPMENT Guarantee 14 DAY RETURN POLICY: We want our Customers to be happy with their purchases. So customers are welcome to return items within the first 14 days of receiving the item if ... morethey are unhappy with the item. There will be a 20% restocking fee on any 2nd return from the same customer that are not due to a hardware failure within the first 14 days of receiving the item. There will be no restocking fee for items that break in transit or have a hardware failure in the first seven days the customer receives it. Buyer is responsible for return shipping charges unless there was a hardware failure We will not issue refunds for items we deemed tampered with or are dissembled by the customer. Our Customer Support We do our best to ensure that each and every transaction is free of problems and issues. If you have any questions or concerns we are here to help. Per eBay's policy and guidelines you must contact us before opening a case. We ask that you only open a case as a last resort and will do everything we can to prevent you from needing to do so. If you would like to Contact us! Please use the eBay message system under the"contact seller" hyperlink. Hours: We are open Monday-Friday. 9am-5pm Central Time. We are closed on Weekends and all Major Holidays. We rarely exceed 48 business hours when responding to emails. If you do not receive a respons
|
|
|
National Electronics NL10254-16 Magnetron
National Electronics NL10254-16 Magnetron Description MAKE: National Electronics MODEL NUMBER: NL10254-16. CONDITION: This item was removed from a professional working environment and is in exceptional used working condition. AUCTION INCLUDES: Unit shown only. ADDITIONAL INFORMATION: Guaranteed& Covered under our 14 day return policy. Only items pictured are included. If a part is not pictured or mentioned in the description then it is not included in the sale. If you are unsure about any aspect of this item please send an email and ask questions before bidding. We do offer combined shipping discounts and free local pickup. Email for details. OceanTech WE BUY& SELL IT EQUIPMENT Guarantee 14 DAY RETURN POLICY: We want our Customers to be happy with their purchases. So customers are welcome to return items within the first 14 days of ... morereceiving the item if they are unhappy with the item. There will be a 20% restocking fee on any 2nd return from the same customer that are not due to a hardware failure within the first 14 days of receiving the item. There will be no restocking fee for items that break in transit or have a hardware failure in the first seven days the customer receives it. Buyer is responsible for return shipping charges unless there was a hardware failure We will not issue refunds for items we deemed tampered with or are dissembled by the customer. Our Customer Support We do our best to ensure that each and every transaction is free of problems and issues. If you have any questions or concerns we are here to help. Per eBay's policy and guidelines you must contact us before opening a case. We ask that you only open a case as a last resort and will do everything we can to prevent you from needing to do so. If you would like to Contact us! Please use the eBay message system under the"contact seller" hyperlink. Hours: We are open Monday-Friday. 9am-5pm Central Time. We are closed on Weekends and all Major Holidays. We rarely exceed 48 business hours when responding to emails. If you d
|
|
|
Nordson/Asymtek Automove 201 Automatic Dispensing Controller 3-Axis 119-2612-00
Search our eBay Store! Nordson/Asymtek Automove 201 Automatic Dispensing Controller 3-Axis 119-2612-00 SKU: JV-MAR-B-NAAUTOMOVE Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Nordson Asymtek Automove(201) Automatic Liquid Dispensing 3-Axis Controller Module 119-2612-00 Rev. E Model: Automove 201 P/N: 119-2612-00 Rev. E Physical Condition: Good- Minor scuffs/scratches on unit from previous use. Front panel/buttons are all intact. Rear panel/connectors are all in good condition; no damage. Unit powers on with working light indicator. We do not have the necessary resources to further test this unit. ... moreDoes not include power cable. Dimensions(L"W"H" 16 ¼ x 19 x 3 ½ PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact
|
|
|
HP DV3000 Laptop motherboard 468499-001 Intel PM965
HP DV3000 Laptop motherboard 468499-001 Intel PM965 2 months warranty Used.But looks 90% new 100% working Package Included: 1 X motherboard NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. Free ... moreShipping items are our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ELITE 4000 Series Manual Screen printer
ELITE 4000 Series Manual Screen printer. The Manufacturer's Description. ELITE 4000 Series(4700)Manual Screen printer 4000 series can accommodate frame sizes ranging from 8" by 10" to 24" by 24" and print to areas of up to: 20" by 20" Asset# 110259/BA. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will ... morebe accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
|
|
|
HP G4 G5 G6 G7 laptop motherboard 636373-001 INTEL HM65
HP G4 G5 G6 G7 laptop motherboard 636373-001 INTEL HM65 2 months warranty Used.But looks 90% new 100% working Package Included: 1 X motherboard NOTE: a.Import duties.Taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Delivery Time Around 13 Business days to the US. And tracking number can be provided. Around 22-25 days to CA. AU, UK Around 28 days to others. There may influenced by holidays. Weather problem and other uncertainties, so not guarantee the arrival time,If you can not get the item within 30 days,please contact us,a refund or resend is up to you.Please adjust your expectation accordingly due to we are shipping it internationally. Free ... moreShipping items are our promotional item. We do not have any hidden cost. We hope to promote our brand and product. Orders will be shipped out from HongKong. Within 2 business day after payment is cleared. ONLY ship to confirmed PayPal address. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Returns are only accepted if we make a mistake or product does not function as stated We aim to response within 1 days.If you are not satisfied with our products or feel that the delivery time is too long please contact us before you leave negative feedback,we are wlways here to help. Please make the payment within 4 days. We only accept PayPal Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Cyberscan Vantage 50 very good condition profilometer and 3D scanning solution
CyberSCAN Vantage 50 Cost-effective profilometer and 3D scanning solution, Integrated motion system with 50mm travel, User friendly concept, The cyberSCAN VANTAGE 50 is a compact. Noncontact profiling system for fast scanning of any part or surface. The system combines a laser sensor, a base unit with an integrated translation stage and a PC or a laptop for data analysis. The sensor scans over the object and produces a high-resolution height profile. The confocal laser sensor can also produce a scan line with the width of 1.1 mm and a lateral resolution of 2 μm. In combination with the translation stage a highly accurate 3D raster can be recorded. Integrated y-stage with sensor mount, 50 mm travel in y- direction. Lateral resolution 0.05 μm, Laser confocal or triangulation sensors, Resolution down to 0.01 μm. Measurement range up to 8 mm, ... more3D Line-scan capabilities(laser confocal sensor) with 1.1 mm width and 2 μm lateral resolution, 2D profiles and 3D topographical maps, Integrated on-axis camera. Visible laser spot inside the camera field of view, Fig. 1: Depth of laser scribing Fig. 2: 3D metallization measurement on solar cells Fig. 3: Thick-film height on hybrid circuits Shipping will be $75 for Continental United States Posted with
|
|
|
66.-Siemens Stern Montiert 00344772s02 (6 segments)
Up for sale: 66.Siemens Stern Montiert S/N: 00344772s02 Condition: The item is marked as"Used" I'm not sure if it's really used. The item is in excellent cosmetic condition. Untested. If you require more pictures. Please contact me. What's included? Just what is shown in the pictures. Shipping: To U.S. only. I'll try to ship as soon as I get the full payment. USPS + tracking# Payment: PayPal Only. Payment must be done within 3 days of purchase. Note: Due the lack of feedback. I'll only leave feedback once i got one from you. If you have any problem with the product please contact me, returns accepted within 14 days after you receive the item. Feel free to email me your questions. Check out my!
|
|
|
EMC Reliant Stencil Cleaner Model 20 Pneumatic 20 IPA
EMC Reliant cleaning system- 20 IPA. Stencil cleaner. Model: 20 Reliant(pneumatic) Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: I do my best to ship items in 3 business days after payment is received. I do combine shipping on most items where possible. Freight shipping quotes may take a little longer. E-mail any questions about freight shipping prices. We can build custom pallets and crates for an extra charge. Shipping to Alaska. Hawaii, Puerto Rico and Guam are available. Buyer to pay additional shipping costs unless item fits in a flat rate box. I will ship to P.O. box if item is not too heavy and can be shipped USPS. International shipping is available on most items please ask before bidding. Insurance: Insurance is included on Fedex and UPS shipments. USPS flat rate ... moreshipping does not include insurance. Buyer must request and pay additional cost of insurance. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Communication: We respond to emails i.e. questions. Offers, shipping etc. everyday. Some quotes on shipping may take a little longer. Shipping info will post on your My Ebay-View Order Details page as soon as item is shipped USPS. If Fedex is used you will receive an email from Fedex with the tracking info. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay s
|
|
|
Plato Vac Kit Desoldering Station (LOC-G2)
This auction is for a Plato Vac Kit desoldering station model V-581. This item is functional. A vacuum pump is required for operation. Customer Service: 805) 658-1331 Payment Instructions: Purchases can be paid trough Paypal. VISA, MASTERCARD or AMEX. International Payment: Paypal or bank to bank transfer Sales Tax: California residents must pay state sale tax Shipping: Buyer Pays Shipping. Shipping estimates are available prior to placing a bid if you email us your shipping destination. Shipping charges include packing and insurance Warranties or Returns: No warranties are expressed or implied. Items that are supposed to be operational according to the listing can be returned if they are D.O.D. Items that are untested or are sold as-is cannot be returned. Additional Terms:Payment must be made within ten days of the auction close date. Please ... morevisit our Store for additional items
|
|
|
ASML 4022-471-5839 ASML Bridge PCB working
This ASML bridge PCB is used. Working surplus. It was removed from a ASML System. The physical condition is good and clean. Model No: 4022-471-5839 Condition: Working. 90 Day Warranty. Estimated Packed Shipping Dimensions: L x W x H = 14" x 14" x 14" 6 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 4 Can't find the answer you're looking for? contact us! Business Hours: 8am to 5pm MST ... moreMonday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling time(possibly longer for freight items. All tracking information is forwarded to the email address associated with your PayPal or eBay account. Same Day Shipping Policy. Contact us b
|
|
|
AMP / TYCO 567066-5-S CRIMP APPLICATOR HEAD with ELECTRONIC COUNTER OPTION
Amp/ Tyco 567066-5-S Applicator Head with Electronic Counter Option Features are as follows: Designed to produce consistent. High-quality terminations· Electronic Applicator Digital Counter Option– working(life of battery unknown) Size- A: 0.031/ 22 AWG/ B: 0.027/ 24 AWG/ C: 0.025/ 26 AWG· For use with AMP-O-LECTRIC Model G Machine(Cat No. 65828) No manuals. Calibration or other accessories- sold as shown· Dimensions: 6.5" L x 4" W x 6" H. Approx. 10 lbs. actual weight) Mechanical condition: Being sold as is. No refunds or exchanges. Used– pulled from working environment Cosmetic condition: unit is used& does show signs of normal use. No major issues– see photos for details Please note: if you require shipping services other than stated or you wish to use your own UPS account( preferred! please request prior ... moreto payment/shipping. Continental US shipping: Flat rate shipping of $25.00– includes insurance. Discounts available for multiple purchases. As always– tracking on every purchase. Other shipping methods may be arranged. Please request prior to purchase. Canada: See rates below if available or inquire. Other than Canada. UPS or federal express(your account) Questions– please contact us prior to placing and offer/purchase and specify the item number please. Payment: Payment must be received prior to removal&or shipping. Texas residents add 8.25% unless TX Resale or Usage Certificate remitted with payment. We accept PayPal& other forms of payment; please see selections below. Check out my! Be sure to add me to your! Please visit our ebay store for more great items. We specialize in Printed Circuit Board Assembly(Electronics Manufacturing) Equipment. Semiconductor, Wire& Cable Processing, Business& Industrial Auctions; Appraisal, Project Valuation& more. Thanks for visiting! Remember Buying used&or refurbished equipment is eco-friendly and helps preserve our non-renewable resources. Internal no. 13537
|
|
|
NEXCOM Single Board PEAK760VL2 REV.D / P4 3.2GHZ 1GB free ship
NEXCOM Single Board PEAK760VL2 REV.D/ P4 3.2GHZ 1GB Shipment We will ship your order within 2 business days via post airmail. It will usually take 10-20 business days after shipment. Return Policy We carefully inspect the item before shipment. In case you found a defect on the purchase. We will exchange or refund it Contact Us We are willing to respond to your inquiry If you have a question or problem.Please contact us first. It is the fastest way to settle your concern or issue.
|
|
|
TEKNEK CIRCUIT BOARD CLEANER FILM CLEANER
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This auction is for a TEKNEK CIRCUIT BOARD CLEANER. This machine will need to have the bands that move the board through the machine replaced. The machine has sat unused for quite some time. Email me for a shipping quote. Email me with any questions. Payment Terms PayPal Shipping Terms Freight, inkfrog terapeak.
|
|
|
Universal Instruments 6285 Axial Inserter
Universal Instruments 6285A Axial Inserter You are bidding on a Universal Instruments 6285A Axial Inserter. The specifications on this machine are: Manufacturer: Universal Instruments Model Number: 6285 Serial Number: MA2B05 Description: Single Head Axial Inserter Input Power: 115V. 15 Amp, 60 Hz, 80 PSI, Single Phase Features: 8221 Controller. 18 in. x 18 in. Rotary Table, Standard Tooling Asset Number: 5009 This machine is available for inspection at our facility in Mount Sterling. Kentucky, with appointment. Please contact Matt at 859.499.3455 or matt@easiky.com to schedule an appointment. Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. EAS personnel is available to answer ... moreany questions Monday– Friday, 8:00 am– 5:00 pm, EST. Machine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals, software, cables, etc. unless noted in the item description. All pictures are the actual photographs of the machine. We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality. EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or email matt@easiky.com. Payment Terms: Payment f
|
|
|
OK INDUSTRIES MTR 4000 REWORK STATION WITH VVM-1 VVM-2 TCM-2
This listing is for(1) OK INDUSTRIES MTR 4000 REWORK SOLDERING STATION WITH VVM-1 VVM-2 TCM-2. This unit has been power on tested only. Comes as pictured. We pack well and ship fast! Mon-Fri) I am not an expert with these as I am a re-seller. But am happy to answer any questions. Sold as-is according to description. Thanks for looking! Powered by SixBit's eCommerce Solution
|
|
|
Vitronics Soltec Unitherm 820A Reflow Oven SMR-820A; 8 Heating & 2 Cooling Zones
Vitronics Soltec Unitherm 820A Reflow Oven SMR-820A Mesh belt and Edge Rail Conveyor 8 Heating Zones and 2 Cooling Zones Lead Free Capable Serial# U80367 1997 Vintage 480 Volt 3 Phase 60 Hz 60 Amps. Condition is above average for its age Machine is very similar to a XPM-820 at a lower price point Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 14 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and ... moregive me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hako IC Lead Straightner FT-100
Available is a Hako IC lead straightner. Specifications for this are: Manufacturer: Hako Model Number: FT100 Asset Number: 5494 Electronic Automation Services Inc. is a buyer and reseller of PCB Assembly equipment. All items listed by EAS are owned by EAS and are readily available for inspection at our facility in Mount Sterling. Kentucky. EAS personnel is available to answer any questions Monday– Friday, 8:00 am– 5:00 pm, EST. Machine Condition: Unless otherwise stated. All machines are sold as-is in the condition depicted in the photographs. If there are concerns with functionality. Please contact us prior to bidding/purchasing. All equipment may be tested prior to sale at additional cost. Machines are generally not provided with manuals, software, cables, etc. unless noted in the item description. All pictures are the actual photographs ... moreof the machine. We strive to represent all machines accurately and appreciate any feedback regarding inaccuracies in our listings. All items are available for inspection at our facility in Mount Sterling. Kentucky. Please contact Matt at matt@easiky.com or by calling 859.499.3455 to schedule an appointment. Warranty: Machines available for sale are provided on an as-is basis. With no warranty, expressed or implied. Assume before bidding that EAS has NOT tested the machine for functionality. EAS makes no guarantee as to the fitness of the machine for a particular purpose. We are always available to answer any questions you may have– please call 859.499.3455 or email matt@easiky.com. Payment Terms: Payment for equipment is expected within three(3) business days of purchase unless other arrangements have been made. Accepted forms of payment include Paypal. Credit Card, Money Order, Cashier’s Check or Money Order. All forms of payment must clear our financial institution prior to shipping. Any item not paid for within seven(7) business days may be reported in an Unpaid Item Dispute with eBay. Shipping: Shipping is the responsibility of the buyer. EAS is able to provide
|
|
|
Nordson / Asymtek C708 Century System Conformal Coater
Nordson/ Asymtek C708 Century System Conformal Coater Stand alone confiuration Select coat software for NT Swirl coat head very clean system 115V. 10A, 60Hz, 1 phase, Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Condition: Very good. Shipping: I do my best to ship items in 3 business days after payment is received. I do combine shipping on most items where possible. Freight shipping quotes may take a little longer. E-mail any questions about freight shipping prices. We can build custom pallets and crates for an extra charge. Shipping to Alaska. Hawaii, Puerto Rico and Guam are available. Buyer to pay additional shipping costs unless item fits in a flat rate box. I will ship to P.O. box if item is not too heavy and can be shipped USPS. International shipping is available on most ... moreitems please ask before bidding. Insurance: Insurance is included on Fedex and UPS shipments. USPS flat rate shipping does not include insurance. Buyer must request and pay additional cost of insurance. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Communication: We respond to emails i.e. questions. Offers, shipping etc. everyday. Some quotes on shipping may take a little longer. Shipping info will post on your My Ebay-View Order Details page as soon as item is shipped USPS. If Fedex is used you will receive an email from Fedex with the tracking info. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now a
|
|
 |