Lead Former Juki Zevatech Air Vac Drs Mpm Speedline Mpm Printer Pick And Place Smt Pcb Tape Feeder Siemens Siplace Stencil Printer Dek 265 Dek Printer Wave Solder Feeders Pick Smt Feeders Air-Vac Nozzle Philips Assembleon Smt Feeder Hepco Smt Pick Place Universal Gsm Siplace Smt Pick And Place Machine Quad Pick Rework System Pick And Place Smt Radial Lead Pick And Place Feeder Screen Stencil Printer Rework Nozzle Bga Rework Smt Placement Juki Feeder Universal Instruments Mydata Agilis Electrovert Quad Pick And Place Solder Machine Hover Davis Smt Pcb 8Mm Feeders Fuji Cp6 Lead Trimmer Convection Reflow Oven Lead Forming Smt Assembly Mydata Tape Feeders Reflow Oven Placement Machine Heller Oven Nordson Asymtek Electrovert Omniflo Speedline Technologies Meter Conveyor Component Lead Former Axial Lead Wire Bonder Rework Station Dek Conveyor Technologies Reflow Mpm Quick Circuit Screen Printer Air-Vac Drs 24C Drs 24C Lead Cutter Mpm Ap Pcb Router Smt Printer Speedline Fine Pitch Dispensing System T-Tech Quick Circuit Lam Research Wave Soldering Crown Simplimatic Automatic Screen Dual Lane Lpkf Protomat Technical Devices Matrox Meteor Mpm Spm Soldering System Fuji Feeder Quad Feeder Pcb Printed Sbc Single Board Rework Forming Machine Vitronics Soltec Amat Quantum Bare Board Loader Frame Grabber Speedline Electrovert Batch Cleaner Surface Mount Gate Conveyor Feeders Cart Cognex Vision Board Test Trimming Machine Circuit Board Plotter Aqueous Technologies Dek Horizon Axial Component Universal Instruments Gsm Dek 248 Srt Summit Pro Series Soldering Machine Bga Csp Advantech Single Board Rev A1 Anti Fatigue Shuttle Gate Printed Circuit Board Static Mat Feeders Vision Board Reflow Soldering Stencil Cleaner Meteor Ii Pick And Place Machine Pcb Conveyor Ok Industries Paste Dispenser Pcb Assembly Component Locator Board Pca-6186 Rev Amat Applied Materials Xr80 Quad Surface Mount Tape Feeders Dip Inserter Rev B1 Matrix Tray Pcb Cleaner Juki Wave Soldering Machine Lab Bench Iac Industries Automated Optical Inspection Mydata Agilis 8Mm 2-Layer Esd Split Vision Inserter Machine Esd Mat Esd Safe Feeders Pa2903 Id Axial Lead Former Mpm Speedline Accuflex Smt Machines Mpm Ap Series Metal Squeegee Blade Universal Radial Mesh Belt Zevatech-Juki Vib Fluid Dispensing Anti Static Opal Xii Dek 260 Taping Selective Axial Inserter Test Fixture Prototyping Wave Soldering System Electrovert Omniflo 10 Zones Reflow Delta Tau Inspection System Lane Smt Pcb Drs Ez Series Feeders Uic Selective Soldering Squeegee Assembly W Metal Pcb Prototype Tray Feeders Cure Oven Motion Control Board Glue Dispensing Antistatic Esd Universal Smt Feeders 90 Degree Automated Products System Belt Conveyor Bench Electronics Esd Workstation Board Assembly Board Pcb Board Rev Card Free Ship Chips Shooter Circuit Board Clean System Cnc Conformal Coatings Control Board Control Card Control Pcb Cpu Board Dell Inspiron Dispensing Systemation
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
80
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: South Lebanon,OH,USA
$
135
Buy It Now
$12.5 Shipping
Condition: New
Location: El Paso,TX,USA
This auction for 32mm CL feeders Brand New Philips Assembleon Feeders. Pneumatic Style. Fits Yamaha YV100 and other machines. Philips Topaz, Opal, Sapphire(GEM ... moreline Machines) Also available 8x4 and 8x2 and 12mm thru 72mm CL Version Adjustable Pitch feeders and 8x2 for 0201 components(green handle) On Jan-19-07 at 22:19:13 PST. Seller added the following information: Sizes available 8x2. 8x4, 12mm, 16mm, 24mm, 32mm, 44mm. 56mm and 72mm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e90539086-0xf8-
$
6,500
Buy It Now
$0 Shipping
Condition: Used
Location: USA
$
145
Buy It Now
Free Shipping
Condition: New
Location: El Paso,TX,USA
JUKI CTF 8x2 and 8x4 mm Feeders Large Quantity Available This Auction is for one 8x2 or 8x4 New Juki Style CTF Feeder Discount for larger feeder orders. ... morePlease Inquire Also available 12mm through 72mm Juki Feeders Fast Shipping- Worldwide Shipping Inquire about Samsung. Panasonic CM Feeders, Yamaha/Assembleon Feeders
$
225
Buy It Now
$0 Shipping
Condition: New
Location: San Diego,CA,USA
$
5,610
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
249.95
Buy It Now
$50 Shipping
Condition: Used
Location: Magnolia,TX,USA
$
200
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
295
Buy It Now
$20 Shipping
Condition: New
Location: El Paso,TX,USA
Brand New Samsung Style Feeders This Auction for 8x2 or 8x4 mm Feeder. Inquire about a risk-free evaluation Inquiry about 12mm. 16mm and 24mm Listings ... moreBrand New with Warranty. Discount for Larger Orders- Please inquire www troysmt com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f01f8a011-0xf1-
$
135
Buy It Now
Free Shipping
Condition: New
Location: El Paso,TX,USA
Brand New Philips Assembleon Feeders. Pneumatic Style. Fits Yamaha YV100 and other machines. Philips Topaz, Opal, Sapphire(GEM line Machines) 8x2 p/n ... morePA 2903/79; 8x4 PA. Available in large pan(dual 15"7" component reel size) or small pan(7" component reel size) Also available 12mm, 16mm throuh 72mm CL Version Adjustable Pitch feeders and 8x2 for 0201 components(green handle) On Jan-19-07 at 22:19:13 PST. Seller added the following information: Sizes available 8x2. 8x4, 12mm, 16mm, 24mm, 32mm, 44mm an 56mm.
$
399.95
Buy It Now
Free Shipping
Condition: Used
Location: Magnolia,TX,USA
This listing is for one feeder cart/trolley Feeders are not included The pictures show feeders on the carts to give an idea of the styles of feeders and ... moreamount of feeders that fit the carts. Juki Feeder Cart/ Juki Feeder Trolley Fit 700 Series The feeders are not included but can be purchased separately. Buyer to responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets or crates for an extra charge. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f3ac3e779-0xff-
$
595
Buy It Now
$195 Shipping
Condition: New
Location: El Paso,TX,USA
Juki Feeder StorageCart(Rack) Many Units Available and In-Stock In-Stock ready for Immediate Shipping Holds 75 8mm Juki Feeders. Accomodates all sizes ... moreup to 72mm Check our other listings for Yamaha/Assembleon and Samsung Feeder Carts.
$
130
Buy It Now
$0 Shipping
Condition: New
Location: Hillsboro,OR,USA
$
2,950
Buy It Now
$0 Shipping
Condition: Used
Location: Duncan,SC,USA
$
4,900
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
275
Buy It Now
$0 Shipping
Condition: Used
Location: San Diego,CA,USA
$
250
Buy It Now
$15 Shipping
Condition: Seller refurbished
Location: Cincinnati,OH,USA
$
237.5
Buy It Now
Free Shipping
Condition: Used
Location: San Diego,CA,USA
$
2,950
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Elmhurst,IL,USA
$
12,500
Buy It Now
Free Shipping
Condition: Used
Location: O'Fallon,MO,USA
$
109
Buy It Now
$12.95 Shipping
Condition: New
Location: Fremont,NH,USA
$
100
Buy It Now
$12.95 Shipping
Condition: New
Location: Fremont,NH,USA
$
25
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
Selling a pair of Siemens PL EA 1 00310418-07 8 mm tape feeders made by German company Siemens. The three items are in very good condition with minor ... morescratches on the sides. And have been refurbished. The parts have tape on the sides to hold them together. These parts made by Siemens are normally sold at $100 USD each. SIEMENS PC(s) Available due to Bailiff sale w 30 days warranty. Best price guarant y for fast sale to include all taxes. Customs& SHIPPING. Why buy used or refurbished w/o warranty& pay more? 50,000 elite items to be listed. Volume discount& bulk shipping. Reseller/Dealer/Repair Center welcome. Flexible financing,leasing layaway plans& installation can be arranged. Please check out my other listings on elite sys t ems(Nuko Essentia Whole Home Automation. Inter-M Public Address System.Nakamichi Home Theater, etc) Pro- series speakers(UK Monitor Audio. ARs,EVs etc) from this foreclosed AV show-mart(one of the largest ret ro speaker restoration c enter) All reasona ble offers will be presented to c re ditor administrator. Local inspection& pickup welcome. Volume discount& bulk shipping for resellers. Standard pricing policy. I checked finished completion& present listing to arrive at a competitive below-market listing price. Should you be able to find a better deal; please present your best offer for me to meet or beat. Please compare same condition(new. Refurbished or used) warranty& refund policy, included accessories. I clean only good clean items from Bailiff(Foreclosure) or Estate(retirement) so the items are first time in the market, unlike most resellers. These select items are available due to unexpected situation, and been well kept primarily as ownership. As I stand behind these items, the risks on buying online will be shared between us. Please do understand there are intrinsic risks in buying online&or purchasing used items. While I understand that all buyers would like super deals, I have to be fair to Estate& creditors, as their agent. Please do yo
$
200
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
2,255
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
125
Buy It Now
$30 Shipping
Condition: Used
Location: Cincinnati,OH,USA
$
13,000
Buy It Now
Free Shipping
Condition: Used
Location: O'Fallon,MO,USA
$
149
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
418
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
20
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
99.75
Buy It Now
Free Shipping
Condition: Used
Location: San Diego,CA,USA
$
550
Buy It Now
Free Shipping
Condition: Used
Location: San Diego,CA,USA
$
600
Buy It Now
Free Shipping
Condition: Used
Location: San Diego,CA,USA
$
100
Buy It Now
Free Shipping
Condition: Used
Location: El Paso,TX,USA
$
400
Buy It Now
$0 Shipping
Condition: Used
Location: Tampa,FL,USA
QUAD IQ Feeder Base Manager PCA. Part Number 10-19727. Used in Quad SMT Pick and Place Machines. This part is used. Tested and functional IslandSMT is ... morea service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) number please send a message with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14180998e85-0xfd-
$
750
Buy It Now
$0 Shipping
Condition: New – Open box
Location: San Diego,CA,USA
This auction is for 5 Surface Mount Matrix Trays/ Waffle Tray Shelves for QUAD Q and C series pick and place machines and Automatic Waffle/ Matrix Tray ... morechangers like the QUAD MT-20/ 10-23989. Two of the Matrix Trays have QUAD/ TYCO numbers on them. One has 10-8445 and the other appears to have a newer number of 30-29923. All 5 appear to be same model. All 5 are in good condition and appear to be in excellent shape and do not appear to be bent or broken. 7 Hold Down Screws will also be included. Winning bidder or BIN will have the option to purchase additional trays. Check our other auctions for a great selection of QUAD IQ feeders. Shipping and packing and insurance is flat rate of 30.00 to the lower 48 states and will ship in two days of payment. Shipping outside the lower 48 states will be at cost. Shipping may be discounted for distances of less than 500 miles. Local pickup is also available at no charge. We are located 15 miles south of Cleveland Ohio 44280.Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will require payment by wire transfer before shipping. USA and Canadian Buyers can use PayPal or wire transfer with time to clear. Invoice will be provided. Thank you
$
55,600
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
41,800
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
10,000
Buy It Now
Free Shipping
Condition: Used
Location: New Paris,IN,USA
$
100
Buy It Now
Free Shipping
Condition: New
Location: Nashua,NH,USA
$
1,512.5
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
400
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
128,000
Buy It Now
Free Shipping
Condition: Used
Location: Gray,ME,USA
$
1,200
Buy It Now
Free Shipping
Condition: New – Open box
Location: San Diego,CA,USA
$
2,090
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
799.95
Buy It Now
$100 Shipping
Condition: Used
Location: Magnolia,TX,USA
$
1,000
Buy It Now
Free Shipping
Condition: Used
Location: El Paso,TX,USA
$
1,072.5
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
175
Buy It Now
Free Shipping
Condition: Used
Location: Minneapolis,MN,USA
$
249.95
Buy It Now
Free Shipping
Condition: Used
Location: Magnolia,TX,USA
$
300
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: San Diego,CA,USA
$
10,000
Buy It Now
Free Shipping
Condition: Used
Location: Fremont,CA,USA
$
200
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
1,200
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
973.5
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
13,090
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
1,100
Buy It Now
Free Shipping
Condition: Used
Location: Longwood,FL,USA
$
299
Buy It Now
Free Shipping
Condition: Used
Location: Nashua,NH,USA
$
299
Buy It Now
$0 Shipping
Condition: Used
Location: Pompano Beach,FL,USA
$
138,000
Buy It Now
Free Shipping
Condition: Used
Location: Gray,ME,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
C98876 Lot 4 Zevatech Pick and Place Parts Feeders(ETF8-5. 2x ETF8-6, ETF8-7) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C98876 This lot includes four Zevatech Pick and Place Parts Feeders. As shown. One is a model ETF8-5, two are model ETF8-6, and one is a model ETF8-7. They look to be in good cosmetic condition, showing some minor signs of wear. Three of them appear to be missing the belt connecting the motor to the pulley wheels at the bottom. The ETF8-7 is the only one that still has it installed(please see photos above for detail) I have no way of testing these items, and they are being sold as-is. Approximate overall unpacked dimensions: 18"L x 7"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree ... moreto all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $18.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 7.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We
Juki KE-750L pick and place High-speed flexible chip shooter Includes 20 Feeders Large board size: 14" x 16" Three-head laser alignment system Using three high-density laser heads. The KE-750 places components from 0201 chips up to 23.5 mm square components. Tape, stick and tray feeders are compatible with KE-760 machines. 200 Volt 2.5 kVA 1 phase 50/60 Hz Serial# may vary Buyer is responsible for packaging and shipping We can build pallets or crates for an additional charge Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are ... morenot accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Hover Davis Feeder Model MPF02-56 See attached pictures and information below 56mm Size- Over 10 Available For Sale- All in Good Condition We have other sizes available too! Quantity discounts available. See our other items. Buyer is responsible for all shipping charges from Boston. MA location. We can skid. Crate, package, and ship to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill- 978-790-2774
Hover Davis Feeder Model MPF02-44 See attached pictures and information below 44mm Size- Over 10 Available For Sale- All in Good Condition We have other sizes available too! Quantity discounts available. See our other items. Buyer is responsible for all shipping charges from Boston. MA location. We can skid. Crate, package, and ship to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill- 978-790-2774
Hover Davis Feeder Model MPF02-88 See attached pictures and information below 8mm Size- Over 10 Available For Sale- All in Good Condition We have other sizes available too! Quantity discounts available. See our other items. Buyer is responsible for all shipping charges from Boston. MA location. We can skid. Crate, package, and ship to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill- 978-790-2774
These are hard to find Philips CSM-84 Feeders( they can be used on other machines. Although we do not have that information) For sale at a great price. We have two of these. The are air feeders that are adjustable and are in excellent condition. The have been recently pulled from production and are being sold as is.
Hello and thank you for your interest in our FUJI Feeders. This listing is to purchase(1) 8 x 4 Fuji Feeder- Part Number Noted is WD-0804- These work on FUJI CP6 Pick and Place Please note the pictures and that the feeders are in good condition. Please contact us for quantity discounts and let us know if interested in any other sizes. We can package and ship to countries overseas. Buyer is responsible for all packaging and shipping charges from our Boston. MA location. Contact Bill at 978-790-2774 TAKE A LOOK AT OUR OTHER FEEDERS FOR SALE
NEW ARRIVAL! Dual head pick and place machine with 15+ feeders. Very reliable and ready to run. This low volume pick and place machine is easy to program and run production. Please contact Jeff with any questions at or call(619)559-6266 The perfect machine for start-ups and companies looking to increase their production capability on a limited budget. Manncorp offers. And more PCB assembly equipment. Accessing is an informational experience. Not only are full details and specifications provided for the 150+ products. But prices are also attainable immediately after minimal contact information is provided. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e5e1a3efb-0xfc-
Very Nice FUJI XP143E Pick and Place Machine For Sale Machine is in good working condition and includes 60 feeders See attached pictures and information below. Equipment Description FUJI Electronics Placement Machine, Model Number: XP-143E, Year 2005, Fixed front and rear feeder banks, 30000 hours of operation, PCB Max: 457 x 356mm, PCB Min: 50 x 50mm, PCB Loading Time: 4.2 seconds, Placing Accuracy: Chips: +/0.05mm. QFPs +/ 0.04mm, Machine Dimensions: 1500 x 1300 x 1408.5 mm, Machine Weight: 1.800 kg, Machine is complete with all accessories and ready to run, Machine includes(30) 8 x 2 Feeders and(30) 8 x 4 Feeders. Buyer is responsible for all packaging and shipping charges. We can set up packaging and shipping to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill 978-790-2774 ... morek5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e69377c00-0xf9-
juki zevatech: feeders 8. 12, 16 and 24mm Description: 8 mm feeders qty 30. 12 mm feeders qty 10. 16 mm feeders qty 10. 24 mm feeders qty 10. Please ask for others parts: Servo driver for zevatech/juki for 700 series. Motors for zevatech/juki for 700 series. Laser Control Card for zevatech/juki for 700 series. I/O. CPU Card for zevatech/juki for 700 series- Hard disk with software installation for zevatech/juki for 700 series. Complet head for zevatech/juki for 700 series(witout laser) camera. All mecanical parts- All electrical parts- All pneumatical parts For internationnal buyers(out of france) please contact us before to place a bid. For shipping cost. 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e83e21e7b-0xfb-
This auction is for 4x Fuji QP242 SMT feeders in an array of sizes. Please ask any questions you may have as there are no warranties expressed or implied before the close of the auction. Thank you. SD/X Scientific Devices Exchange LLC
Siemens 24/32mm Feeders- Schultz Style- 24mm and 32mm This A uction is for one feeder(3 feeders in photo but auction is for just one feeder) 50 used feeders availa ble
24mm CF feeders for juki/zevatech FS730/740/750/760 pick and place machine. Lot of 5. Ask us for shipping cost. We have also in stock: 12mm CF feeders(more than 10) 16mm CF feeders(more than 10) 24mm CF feeders(more than 10) Vibratory stick feeders(2 pcs) Camera(FS730/FS740/FS750/FS760) 1 pcs) CPU board IO board Laser board Servo motor board Ask us for all the spares parts(juki 730/740/750/760) Material location is in France. So for international shipping please ask us before bidding.
16mm CF feeders for juki/zevatech FS730/740/750/760 pick and place machine. Lot of 5. Ask us for shipping cost. We have also in stock: 12mm CF feeders(more than 10) 16mm CF feeders(more than 10) 24mm CF feeders(more than 10) Vibratory stick feeders(2 pcs) Camera(FS730/FS740/FS750/FS760) 1 pcs) CPU board IO board Laser board Servo motor board Ask us for all the spares parts(juki 730/740/750/760) Material location is in France. So for international shipping please ask us before bidding. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ede6a42ab-0x101-
12mm CF feeders for juki/zevatech FS730/740/750/760 pick and place machine. Lot of 5. Ask us for shipping cost. We have also in stock: 12mm CF feeders(more than 10) 16mm CF feeders(more than 10) 24mm CF feeders(more than 10) Vibratory stick feeders(2 pcs) Camera(FS730/FS740/FS750/FS760) 1 pcs) CPU board IO board Laser board Servo motor board Ask us for all the spares parts(juki 730/740/750/760) Material location is in France. So for international shipping please ask us before bidding.
8mm CF feeders for juki/zevatech FS730/740/750/760 pick and place machine. Lot of 10. Ask us for shipping cost. We have also in stock: 12mm CF feeders(more than 10) 16mm CF feeders(more than 10) 24mm CF feeders(more than 10) Vibratory stick feeders(2 pcs) Camera(FS730/FS740/FS750/FS760) 1 pcs) CPU board IO board Laser board Servo motor board Ask us for all the spares parts(juki 730/740/750/760) Material location is in France. So for international shipping please ask us before bidding.
UNIVERSAL/ SANYO(Qty. 2) CT-1281 Large Pan& Small Pan(Qty. 1) CT-0862 Large Pan HSP 4796 8 x 4 EMBOSSED 15" LARGE PAN SIZE Universal. HSP 4796, 8x4, 15in. Embossed, CT-0862, Items are in Very Good Physical& Working Condition. Non DOA Warranty. Please contact me with any questions prior to bidding. Thanks Posted with
Philips Emerald Xi. Tray Feeder, 47 Feeders and Reject Feeder Package Philips Emerald Xi Pick and Place Year: 2000 Type: PA131311 Nc: 946601313111 No: FFPK032Y10001 Philips LCS Tray feeder/ tray loader Year: 1999 Type: PA269922 Nc: 946602699221 No: FF00936Y10009 Includes Feeders and Reject Feeder 8mm Intelligent- 30 16mm-5 24mm- 5 32mm- 2 44mm- 5 Reject feeder Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me ... morewith any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Panasonic 10488BF191 MPA-V2XL 8 x 4. The Manufacturer's Description. Panasonic 10488BF191 MPA-V2XL 8x4 Baercode# 05479/BA Calibration. Additional Cost: TBD We can arrange for the calibration of your unit by an accredited calibration lab. If you choose to let us have your instrument calibrated. Please do not checkout until we have re-invoiced you. Contact Us. Please don't hesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if ... morethe return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
Quad 8mm feeders. These are all serviced and ready to use. all are 12volt 8 pin new type feeders not the old 5volt kind. all in GREAT condition and just serviced. Free Shipping
2 wheeled. 6 ft carts and 55 feeders. There is some rust on feeders and carts. Feeders have not been tested. Please make an offer. 15) WE2412 5) WE2416 8) WE2408 3) WE1604 17) WE1612 2) WE1208 2) WE3216 3) WE3224 box of spare parts
NOTE: Machine MUST be picked up or shipped away by July 10th. Do not bid on this listing unless you can meet this requirement. See below for item location details(no loading dock. No forklift) For sale is a Mamiya Denshi MHP-30B Mk II Pick and Place machine It is a triple-head placing machine that can place components down to at least 0603(I have not tried to place smaller components) at a published rate of up to 7200 components per hour. It has a camera to assist in programming the machine. However it is only for the operator's ease of use, and doesn't do on-the-fly centering of the components as some of the newer camera systems do. It comes with 25(twenty-five) 8-millimeter Tape and Reel feeders(which would normally cost at least $2500 by themselves) You can make your own waffle tray holders for SOIC-type chips. It is also easy ... moreto make vibratory stick feeders work with the machine(you just tell it where to pick up the part from the waffle tray or end of the stick feeder) The operating software is a DOS-based program that runs on a 386 computer with hard drive included with the machine. It is a pain to program the placement info. But the good news is that it is written in BASIC, and has the source code on disk so that you can make changes, if you so wish. The machine operates from 110V so it doesn't require any complicated wiring. And has wheels so that it is easily pushed around on the floor by a single person. It requires compressed air, which I supply from a quiet dental air compressor(not included) so theoretically, you could even use it in an apartment. It works. However since it is a complicated bit of machinery and I don't want to be on the hook for endless machine support, it is being sold as-is. Do not bid on it unless you are willing to play around with it to learn its quirks and how to maintain it. The display monitor was just completely refurbished at a cost of $200. There are 5 feeder trays included(each feeder tray can hold 12 feeders) Two of the feeder trays have bent/broken pins o
Lot of 3 Panasonic 1015625000 MPA G1 12X12 feeders. The Manufacturer's Description. Lot of 3 Panasonic feeders. Panasonic 1015625000 MPA G1 12X12 feeder. Barcode# 10421.33715,33716/BA Calibration. Additional Cost: TBD We can arrange for the calibration of your unit by an accredited calibration lab. If you choose to let us have your instrument calibrated. Please do not checkout until we have re-invoiced you. Contact Us. Please don't hesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of ... morethe original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
3) Panasonic 1015636000 MPA G1 16X12 feeders. The Manufacturer's Description. Panasonic 1015636000 MPA G1 16X12 feeder. We are selling these in lots of 3pcs. Barcode#s 10411.10412,10413,10414,10415, 10416.10417,10418,10419/BA Calibration. Additional Cost: TBD We can arrange for the calibration of your unit by an accredited calibration lab. If you choose to let us have your instrument calibrated. Please do not checkout until we have re-invoiced you. Contact Us. Please don't hesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment ... moreSource's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
5) Panasonic 1015634500 MPA G1 12X8 feeders. The Manufacturer's Description. For Sale is a lot 5 Panasonic Feeders. Panasonic 1015634500 MPA G1 12X8 feeder. Barcode# 10396.10397,10398,10399,10400/BA Contact Us. Please don't hesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged ... morea restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
4) Panasonic 1015634500 MPA G1 12X8 feeders. The Manufacturer's Description. For Sale is a lot of 4 Panasonic Feeders. Panasonic 1015634500 MPA G1 12X8 feeder. Barcode# 10392.10393,10394,10395/BA Contact Us. Please don't hesitate to contact us through eBay or over the phone! All of our items are available for inspection or pickup at our store. R-1 Source Surplus Store 8651 Production Ave San Diego. CA 92121 Store Hours: M. T, Th, F: 10-4 PST, W: 10-6 PST Store Phone# 858) 693-1991 Email: Sales@Wesource.com Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged ... morea restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
Complete PICK AND PLACE LINE! DEK Printer. Europlacer, Heller 1500EXL ready to build your boards. DEK 248 Screen printer 2003 vintage Europlacer EP 928 Twin Head Pick And Place Machine with over 90 feeder INCLUDED! Serial number: 1001685 2001 Vintage Includes(3) 33 Lane Trolley's And(1) Smart Feeder Trolley with Feeders 16x18" board. small part capable. Matrix Parts Feeder. Vision Inspection. 210 Volt 3 Ph 60 Hz 15 A 2001 Heller 1500EXL 480V 3PH 5 zone reflow 1 cooling zone. Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets and crates for an extra charge. Returns: Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: ... moreFeedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
This package includes 104 FUJI Feeders listed below and 3 FUJI Carts All in good condition(24) 8x4– Part Number: WD-0804(23) 12x8– Part Number: WE-1208(8) 12x4– Part Number: WD-1204(18) 8x4– Part Number: WE-0804(16) 16x8– Part Number: WE-1608(3) 16x12– Part Number: WE-1612(8) 8x2– Part Number: WD-0802(4) 24x12– Part Number: WE-2412(3) FUJI Feeder Carts portable on wheels We can package and ship overseas and arrange shipping by boat or airplane at extra cost. Please let us know if you have any questions or concerns Contact: Bill at 978-790-2774
Philips Assembleon Opal Xii Pick and Place. Fes Carts and Feeders Model: Opal XII Vintage: 2008 Head: 8 Spindle Hours: 3403 Software Version: 1.19R3.000 Build Version: 205 System Version: 1.50 Options: Removable Docking Feeder Carts in Front 2 Banks on Machine Bar Code Set-Up. Feeders Included: 30- 8mm 2- 12mm 2- 16mm 4 Fes Carts. Buyer is responsible for shipping. Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or ... moreproblems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
This auction is for one 32mm IQ( Intelligent) Surface Mount Tape Feeders and one 32mm tape feeder reel arms for QUAD Q series and C series pick and place machines. This is a newer 8 pin feeder and will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1/ Plus. QSP-2, QSX-1, QSP-2, C4, C2, 3,QSA, APS-1 and 4000C and 1000. The feeder electronically advances when pick nozzle or your finger interrupts the pickup sensor. The feeder will tape advance and rewind when using the black and red switches. This feeder has newer capstan idler rubber and will advance smoothly and without excess noise. Idler rubber does not have bumps or dead spots that are common from storage or age. The tape take up reel is in good condition and advances. Contact pins are all in good condition. The reel ... morearm holder is an extra bonus and add at least 35.00 in value to the auction. Most dealers selling feeders charge extra for reel arms and the larger ones are often not even available. You will get the feeder pictured. This feeder has version 3.40 firmware. Video of the feeder in the auction under test on the bench, taken a few days before the auction, is available by request. One of the pictures shows the feeder under power in a feeder base during the video. Winning bidder or BIN will have the option to purchase additional feeders. Check our other auctions for a great selection of QUAD IQ feeders and other QUAD parts including feeder bases and carts. Shipping. Packing and insurance is flat rate of 15.00 to the lower 48 states and will ship in two days of payment. Shipping outside the lower 48 states will be at cost. Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will require payment by wire transfer before shipping. USA
This auction is for one 44mm IQ( Intelligent) Surface Mount Tape Feeders and one 44mm tape feeder reel arms for QUAD Q series and C series pick and place machines. This is a newer 8 pin feeder and will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1/ Plus. QSP-2, QSX-1, QSP-2, C4, C2, 3,QSA, APS-1 and 4000C and 1000. The feeder electronically advances when pick nozzle or your finger interrupts the pickup sensor. The feeder will tape advance and rewind when using the black and red switches. This feeder has newer capstan idler rubber and will advance smoothly and without excess noise. Idler rubber does not have bumps or dead spots that are common from storage or age. The tape take up reel is in good condition and advances. Contact pins are all in good condition. The reel ... morearm holder is an extra bonus and add at least 35.00 in value to the auction. Most dealers selling feeders charge extra for reel arms and the larger ones are often not even available. You will get the feeder pictured. This feeder has version 3.40 firmware. Video of the feeder in the auction under test on the bench, taken a few days before the auction, is available by request. One of the pictures shows the feeder under power in a feeder base during the video. Winning bidder or BIN will have the option to purchase additional feeders. Check our other auctions for a great selection of QUAD IQ feeders and other QUAD parts including feeder bases and carts. Shipping. Packing and insurance is flat rate of 15.00 to the lower 48 states and will ship in two days of payment. Shipping outside the lower 48 states will be at cost. Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will require payment by wire transfer before shipping. USA
All items are sold“as is” unless explicitly stated otherwise in the description of the listing. Model: Topaz Xi Vendor: Assembleon DOM: 06/00 Condition: Inline with its age Facilities: 200/208/230/240/380/400/416 V- 3 phase Dimms: 1650x1850x1408(LHW in mm) ● includes: manuals. Software, and spare part kit ● feeders available with feeder cart and test station ● calibration kit available ● Line array camera ● nozzle changer ● hand held teaching pendant ●"i" machine- uses electronic multi-pitch feeders ● CE Marked ASK US ABOUT OUR NO RISK MACHINE ZEROING(at additional fee) Over ten years of selling experience on eBay has taught us that clearly stated policies and a clearly defined set of expectations between the buyer and seller lends to a higher degree of customer satisfaction and an overall better buying experience. Please take the ... moretime to review these policies. The Capital Equipment Exchange(CEE) offers this items in other sales venues and has the right to pull this item at any time if sold in these other venues. Item Condition Capital Equipment Exchange(CEE) receives the majority of our items by way of industrial asset recovery programs that includes visual inspection while running. Our capabilities to test equipment are extensive but our time is limited so we list these capital assets on ebay“as is” At an addition cost we can fully test this system. All items are sold“as is” unless explicitly stated otherwise in the description of the listing. When viewing our listings. Please assume that the item has not been functionally tested by a qualified technician unless otherwise clearly stated in the description. Items do not come with power cables unless stated in the description. Items do not come with any documentation or additional hardware or software except for what is depicted in the image or explicitly stated in the description. The item depicted in listing photographs is the item available for purchase unless specifically stated in the auction. We do not use stock photos. In the case of a listings
Mydata Agilis 7.5- 9.5 Black Adjustable Feeders
Mydata Agilis 8.5 12mm Yellow Feeders
Used Mydata Agilis 12.5 16mm Yellow Feeders
This auction is for 3 24mm IQ( Intelligent) Surface Mount Tape Feeders and 3 24mm tape feeder reel arms for QUAD Q series and C series pick and place machines. These are the newer 8 pin feeders and they will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1/ Plus. QSP-2, QSX-1, C4, C2, 3,QSA, APS-1 and 4000C and 1000. All feeders electronically advance when pick nozzle or your finger interrupts the pickup sensor. All feeders tape advance and rewind when using the black and red switches. All feeders have newer capstan idler rubber and will advance smoothly and without excess noise. Idler rubber does not have bumps or dead spots that are common from storage or age. All tape take up reels are in good condition and advance. Contact pins are all in good condition. The reel ... morearm holders are an extra bonus and add at least 90.00 in value to the auction. Most dealers selling feeders charge extra for reel arms if they are even available. You will get the feeders pictured and these are newer feeders of the same age and some are consistent lots. They all have version 3.40 firmware. Video of the feeders in the auction under test on the bench, taken a few days before the auction, are available by request. One of the pictures shows the feeders under power in a feeder base during the video. Winning bidder or BIN will have the option to purchase additional feeders. Check our other auctions for a great selection of QUAD IQ feeders and other QUAD parts including feeder bases and carts. Shipping, packing and insurance is flat rate of 25.00 to the lower 48 states and will ship in two days of payment. Shipping outside the lower 48 states will be at cost. Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will r
This auction is for 10 8mm IQ( Intelligent) Surface Mount Tape Feeders and 10 8mm tape feeder reel arms for QUAD Q series and C series pick and place machines. These are the newer 8 pin feeders and they will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1/ Plus. QSP-2, QSX-1, C4, C2, 3,QSA, APS-1 and 4000C and 1000. All feeders electronically advance when pick nozzle or your finger interrupts the pickup sensor. All feeders tape advance and rewind when using the black and red switches. All feeders have newer capstan idler rubber and will advance smoothly and without excess noise. Idler rubber does not have bumps or dead spots that are common from storage or age. All tape take up reels are in good condition and advance. Contact pins are all in good condition. The reel ... morearm holders are an extra bonus and add at least 200.00 in value to the auction. Most dealers selling feeders charge extra for reel arms if they are even available. You will get the feeders pictured and these are newer feeders of the same age and some are consistent lots. They all have version 3.40 firmware. Video of the feeders in the auction under test on the bench, taken a few days before the auction, are available by request. Winning bidder or BIN will have the option to purchase additional feeders. Check our other auctions for a great selection of QUAD IQ feeders and other QUAD parts including feeder bases and carts. Shipping. Packing and insurance is flat rate of 25.00 to the lower 48 states and will ship in two days of payment. Shipping outside the lower 48 states will be at cost. Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will require payment by wire transfer before shipping. USA and Canadian Buyers can use Pay
This auction is for 8 12mm IQ( Intelligent) Surface Mount Tape Feeders and 8 12mm tape feeder reel arms for QUAD Q series and C series pick and place machines. These are the newer 8 pin feeders and they will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1/ Plus. QSP-2, QSX-1, C4, C2, 3,QSA, APS-1 and 4000C and 1000. All feeders electronically advance when pick nozzle or your finger interrupts the pickup sensor. All feeders tape advance and rewind when using the black and red switches. All feeders have newer capstan idler rubber and will advance smoothly and without excess noise. Idler rubber does not have bumps or dead spots that are common from storage or age. All tape take up reels are in good condition and advance. Contact pins are all in good condition. The reel ... morearm holders are an extra bonus and add at least 200.00 in value to the auction. Most dealers selling feeders charge extra for reel arms if they are even available. You will get the feeders pictured and these are newer feeders of the same age and from a consistent lot. They all have version 3.40 firmware. Video of the feeders in the auction under test on the bench, taken a few days before the auction, are available by request. Winning bidder or BIN will have the option to purchase additional feeders. Check our other auctions for a great selection of QUAD IQ feeders and other QUAD parts including feeder bases and carts. Shipping. Packing and insurance is flat rate of 25.00 to the lower 48 states and will ship in two days of payment. Shipping outside the lower 48 states will be at cost. Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will require payment by wire transfer before shipping. USA and Canadian Buyers can use PayPal
This auction is for 4 16mm IQ( Intelligent) Surface Mount Tape Feeders and 4 16mm tape feeder reel arms for QUAD Q series and C series pick and place machines. These are the newer 8 pin feeders and they will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1/ Plus. QSP-2, QSX-1, C4, C2, 3,QSA, APS-1 and 4000C and 1000. All feeders electronically advance when pick nozzle or your finger interrupts the pickup sensor. All feeders tape advance and rewind when using the black and red switches. All feeders have newer capstan idler rubber and will advance smoothly and without excess noise. Idler rubber does not have bumps or dead spots that are common from storage or age. All tape take up reels are in good condition and advance. Contact pins are all in good condition. The reel ... morearm holders are an extra bonus and add at least 100.00 in value to the auction. Most dealers selling feeders charge extra for reel arms if they are even available. You will get the feeders pictured and these are newer feeders of the same age and some are consistent lots. They all have version 3.40 firmware. Video of the feeders in the auction under test on the bench, taken a few days before the auction, are available by request. One of the pictures shows the feeders under power in a feeder base during the video. Winning bidder or BIN will have the option to purchase additional feeders. Check our other auctions for a great selection of QUAD IQ feeders and other QUAD parts including feeder bases and carts. Shipping. Packing and insurance is flat rate of 25.00 to the lower 48 states and will ship in two days of payment. Shipping outside the lower 48 states will be at cost. Feel free to call or email if you have any questions. 440)826-1676 10am-6pm EST. Please do not wait till the last few hours with your questions. Buyers with a score of 5 or fewer feedbacks or 1% or more negative feedback or non-US buyers must contact us before bidding. Buyers outside the USA or Canada will
Panasonic smt machine feeders. All diffrent sizes and varieties.one Part number is 10485bl156 8wx4p paper. Any questions please message me. Will make package deal 90.00 for each obo Posted with
Contact Systems 3AVX-100 $15.000 The 3AVX places a full range of components from small chips to large. Fine pitch devices and BGA's. It features a vision and positioning system with the extreme accuracy required for ultra fine pitch placements. The maximum placement rate of the Contact 3AVX is 8,500 cph 3AVX Features included: 115V. 10A, 1 phase Mounting of up to 100 components 100% Vision Centering Touch Serial number:112098387AVQ complete manual This machine has been in storage for 18 months. Prior to putting in storage machine was in great working condition but has not been tested since taken out of storage. Machine sold as-is. Will include 60 assorted feeders Please contact seller for additional questions about machine. We also have a Contact 3SX-80 we are selling. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14011527117-0xfb-
SMT-8700 Pick and Place. It's mostly here. Even have the PC that goes with it. OS and programs are in Japanese, not really useful to me. Our goal was a DIY pick place using the feeders, vibes, steppers already there and just add in our own controller. Rather than build a Placing machine from scratch we were going for a KFLOP and drive it with G code. The project never got off the ground and we need to clear some space. It comes with 3 feeders bases, and I think 29 feeders. There are a couple of tube feeders and a rotary base. The feeder bases have a single air line and each feed base is electrically controlled. Feeders and bases are probably worth far more than I'm asking, but I want the entire machine to go. You won't be able to just plug it in and run, but it's probably 90 to 95% just needing a modern controller. I'll ... morehelp load it into a truck if you pick it up- highly recommended. Our put it on a pallet and wrap it for $100- you would need to send a tail gate truck. It's fairly heavy, I can guess at 400 pounds, going to guess at 48" by 48" by 48" on dimensions.
Philips Topaz-x Pick and place system- 8 head 2000 Vintage Type: PA131201 Nc: 946601312011 No: FFPJ025Y10118. Machine condition is good Places 0201 through BGA. QFP's up to 1.26" x 1.26" 32mm x 32mm) Approx 15K CPH(Optimal) Max PCB Size: W17.4" 441.96mm) x L18" 457.2mm) Min PCB Size: W2" 50.8mm) x L2" 50.8mm) PCB Thickness: 015" 381mm) to.15" 3.816mm) Component Placement: 15.000- 18,000 c/p hr. Component Pitch: QFP- 0024" 06mm) BGA- 02" 5mm) Grildock control and distribution box- no supports. Includes 15 8mm feeders. We can accomodate larger feeder packages and have LCS systems in stock if needed. Buyer is responsible for shipping. Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items ... moreplease ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Complete SMT Assembly Package Philips Opal Xii Pick and Place with 2 FES Carts and 25 Feeders Dek Horizon 03i Screen Printer BTU Pyramax 98A Reflow Oven Philips Assembleon Opal Xii Pick and Place. Fes Carts and Feeders Model: Opal XII Vintage: 2006 Type: PA131424 Nc: 946601314241 No. FFPB621Y10003 Head: 8 Spindle Hours: 3078 Software Version: 1.19R3.000 Build Version: 205 System Version: 1.41 Options: Removable Docking Feeder Carts in Front 2 Banks on Machine Bar Code Set-Up 2 FES Carts 25 Feeders DEK Horizon 03i Screen Printer 2005 Vintage Serial# 288187 Graphite Camera 520 mm Board Clamps Print Speed: 2mm to 150mm/sec 115 V 50/60 Hz Approximate Dimensions: 81.1" x 59" x 62" About 1500 lbs. BTU Pyramax 98A Reflow Oven 2005 Vintage Serial# APA-1 Very good condition Options Include: Mesh belt and edge rail combination(0.190" ... more4.88mm pin) Roller Bridge Support Smart Tracker SMEMA Extension Table(18 inch length) General Specifications: Maximum temperature rating: 350*C Nominal operating temperature: 80-325*C Number of controlled heated zones: 7 Top 7 Bottom Oven atmosphere: Air Working dimensions: Conveyor belt: 18 in. 457 mm Product clearance: 2 in. 51 mm Conveyor Speed: 10-60 in/min; 25-152 cm/min Conveyor Width: 2-18 in; 51-457 mm Heated Length: 98 in/ 2489 mm Cooling Length: 24 in/ 610 mm Cooling Zones: 1 Lead Free Process Overall dimensions: 167" long x 60" wide x 60" tall Dry Weight: 3500 lbs. 1591 kg Shipping Weight with skid: about 3900 lbs. 1773 kg Shipping weight with crate: about 4300 lbs. 1955 kg Atmosphere: Nonexplosive 480 Volt 89 Amp 3 ph 73 kva 50/60 Hz Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: E-mail any questions about freight shipping prices. We can build custom pallets and crates for an extra charge. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address
12mm Quad IQ feeders. Pulled from our production floor overstock and guaranteed in working condition, tested again before shipping! Feeder arms included. Many of these feeders available! Thanks for looking!
Siemens Siplace 80 F3(Upgraded to F4) 2 Feeder Carts 75 Feeders Siemens Siplace 80 F3 Upgraded in 2003 to F4 2000 Vintage Serial# 625-12002323 110/208V 50/60 Hz 2 Feeder Carts 75 Feeders Includes Manuals Weight: 2320 kg(5115 lbs. Buyer is responsible for packaging and shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with ... moreany concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14079d06e79-0x107-
10 x 8mm SLIM feeders. Pulled from our production floor overstock and guaranteed in working condition! Feeder arms included with all 10 if desired. More of these feeders available! Thanks for looking! 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-1407a04a5fd-0xf1-
FUJI CP-6 8x2 Feeders Used- Good Working Condition c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-1409fc725f7-0xfd-
Package of(3) Universal Instruments 4559A PTF's/ UIC Platform Tray Feeders They are being sold AS IS. Untested 46519502 230 Volt 4 Amps 50/60 Hz 2 Phase Air Required PSI: 85 CFM: 2 Liters: 56 Bars: 5.86 Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: E-mail any questions about freight shipping prices. We can build custom pallets and crates for an extra charge. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. ... moreFeedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Contact 3S pick and place machine in excellent operating condition. Less than 5000 hours use. This is a complete. Fully operational system which is still on our production floor. Sale includes full documentation including operating manuals. Service manuals, machine software and calibration tools. Many extra tips of various sizes and spare part kit are also included. The sale also includes the following feeders: 38- 8mm feeders 4– 12mm feeders 3– 16mm feeders 3– 24mm feeders 1– vibratory feeder platform This machine was used for small production runs at our facility from 2001 thru 2013 and was operated less than 100 hours per year. Manufactured 8/15/1995 Operating Hours: 4844 Machine has on-the-fly vision centering. 3 cameras, fiducial recognition, 2 independent placement heads with 2 spindles per head, runs on 115vac, 15amp power, is capable ... moreof 0402 component placement and lead pitch of 20mil or greater. This is a great machine for anyone running low to mid volume. Placement rate is approximately 5000 cph. Item is being sold AS IS. A local on-site demonstration can be arranged or video can be sent of machine operation. Shipping Information Shipping weight is approximately 2000 lbs. Please note that PCB assembly equipment requires special care when shipping. We can assist you in finding a transportation service specializing in the transport of this type of equipment. Shipping costs are the responsibility of the buyer. Shipment is FOB Chicago. IL. Please contact us with any questions you have.
You are looking at a Mancorp ECM 93 Automatic SMT pick and place assembly machine. This is a fully self contained system and is ready to run. We have been using this machine for the past 4 years for proto and short production and it has suited us very well. It can handle up to 24 feeders. There are 34 different feeders that come with the package. most of them typical 8mm and a few wider sizes. The vibratory feed handles tube packaged parts and looks like it can hold about 6 tubes depending on the tube width. Manuals. Nozzles and a few little replacement parts are provided. Shown in the photo's is a macorp reflow oven that is also fully functional. This is only included for full sale price, lower offers will not get the oven and It will be sold in a separate listing. We will be glad to crate. Pack, palletize, amd arrange freight for this ... moremachine at no extra cost but buyer will be responsible for actual freight cost. Buyer required to deposit $500 within 48 hours of sale. This is an As Is sale. thank you for looking.
3 used in good working condition 4.7 8mm yellow feeders. Part# L-014-1319
Welcome you are bidding on 1 dual lane feeder that fits Qp. Np1, Np2 Fuji SMT pick and place machines. These intelligent feeders are over $1000.00 new. Priced to move we have hundreds in stock as seen in pictures. Please email me for bulk lot discounts and shipping prices. Will ship world wide. Buyer pays all shipping fees. Also can schedule for pick up or possible delivery. Please message me if you have any questions. Thanks and good luck! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1413952709a-0x100-
Make offer! This listing is for 2 feeders. One 24X8 used for CP6 in good condition One 8X4 used for CP6 or CP7. This may not be a genuine Fuji feeder. Appear to be in good condition except for a missing spring. I don't know what the spring part number. Please check out the pix with the finger pointing. I'm listing this feeder as repair or for parts. Insured shipping to 48 lower states is fixed at $25. SOLD AS IS I also have some OEM and after-market CP6 nozzles in different sizes. Please contact me if interested. Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14139527140-0xf6-
6 used in good working condition 4.0 8mm white feeders. Part# L-014-1320
JUKI/ Zevatech. M6009 Vibratory Feeder Base(OEM) for Stick Feeders 24VDC 0.2A Good Working Condition
Panasonic MPAV2 chip feeders. a variety of sizes all at clearance price of 75.00 Ea. 10 pc. minimum on these. Free shipping in continental US if you take all. QTY, PART# 8 X 4 P/E, 9, 10896BF071, 8 x 4 E, 8, 10488BF192, 8 X4 P, 13, 10488BF192, 12 X 8, 1, 10488BF204, 16 X 8, 16, 10488BF007, 16 X 12, 10, 10488BF008, 24 X 12, 5, 10488BF012, 24 X 16, 2, 10488BF013, 24 X 20, 1, 10488BF074, 24 X 4, 1, 10488BF010, 24 X 24, 1, 10488BF015, 32 X 16, 11, 10488BF020, 32 X 24, 4, 10488BG011, 44 X 16, 1, 10488BF087, 44 X 16, 1, 10488BF027, 44 X 32, 9, 10488BF031, 44 X 36, 1, 10488BF032, 56 X 12, 1, 10488BF035, 56 X 24, 3, 10488BF038, 72 X 16, 1, 10488BG031, These are used. But fully functional chip feeders. Shipping rates are for Continental US Locations only. Contact us for other location options SMT Parts. Inc. offers one of the largest selections of ... moreOEM original, used, and aftermarket replacement parts in the world, and we ship globally Our mission at SMT Parts. Inc. is to earn and keep your business. All of our products are backed by a 100% satisfaction guarantee. If you are not completely satisfied with your purchase, we will promptly and cheerfully provide an exchange or refund. SMT Parts. Inc. constantly strives to improve the experience of our customers, so your feedback and suggestions are welcomed. We look forward to having the opportunity to serve you!
Philips/Assembleon Yamaha 8x4 8mm Feeders For FCM placement equipment that used the mechanical Yamaha Feeders Philips/Assembleon CSM 66. CSM 84 and CSM 84V and CSM 84VZ machines and their Yamaha equivalent Troysmt.com
This listing is for the Feeders and Feeder Cart as shown in the pictures. They are being sold AS IS. Untested. Some have notes saying they are not advancing but we have not tested them. Universal 4796B/ Sanyo TCM Feeders Includes: Feeder Cart 67 Large Reel Yellow 6 Large Reel Green 1 Large Reel Blue 6 Large Reel Orange 4 Large Reel Red 1 Large Reel Gray 6 Small Reel Blue 12 Small Reel Red(some say"not advancing" Buyer to responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets or crates for an extra charge. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is ... morevery important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
This listing is for the Feeder Cart as shown in the pictures. It holds Universal 4796B/ Sanyo TCM Feeders 3 Shelf. On Wheels Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets or crates for an extra charge. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer ... moreservice. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Philips Assembleon ITF2 Electronic Feeders- 8mm. Used- Tested in Good Working Condition- No Missing Parts For use on Philips Assembleon Machines that can use ITF2 electronic feeders like FCM2. TOPAZ Xi etc. ITF2 08K7-13. P/N PA 2654/06 Troysmt.com
3 Feeders. Feeders were operational on MSR at time of shutdown. Part#FAG8W02RM1 8Wx2P. Jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-141856fe990-0xf0-
Jim The Great Normal Owner 17 178 2013-07-27T18:17:00Z 2013-10-08T06:02:00Z 2 418 2389 Hewlett-Packard 19 5 2802 14.00 BestFit Clean Clean false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Assembleon/Philips Emerald-Xi Pick and Place with LCS& 45 Feeders Features& Benefits Pick& Place· Vintage: 2001· Hour Meter: 22.552.2 Hours· Type PA 131311· Nc 946601313111· No FFPK105Y10004· 2) Upward Cameras 45mm and 35mm· Feeder capacity(8mm) Up to 74 intelligent tape feeders· Optimal placement rate: 6800· Component range: 0603(0201" to 54 x 54 mm(BGA. UBGA. CPS, connectors, odds) Component height: 15mm· Board size: o Min/Max: 50 x 50 mm to 460 x 440 mm(18" x 17.2" o Thickness 0.4- 4.0 mm· 45 Feeders included o Qty 25: 8mm ITF Feeders o Qty 9: 12mm ... moreITF Feeders o Qty 7: 16mm ITF Feeders o Qty 1: 24mm ITF Feeders o Qty 1: 32mm ITF Feeders o Qty 2: 44mm ITF Feeders LCS· Vintage: 2000· Type PA269922· Nc 946602699221· No FF00012Y10030· Philips ID# M28502 YouTube Videos• Pick and Place Machine• LCS Sale Terms· Buyer to pay purchase price in advance. Shipping· Buyer is responsible for shipping. o Pickup location: Tempe AZ 85282 o Pick and Place approximate size LxWxH is 5.5ft x 4.5ft x 6ft 2.500 lbs o LCS approximate size LxWxH 4.5ft x 3ft x 4.5ft 1.500 lbs o Shipping truck will require a lift gate for pick up. o Suggested rigging and shipping company: § Craters and Freighters(877) 966-9916 § Return Policy· You may return undamaged items within 14 days of the original delivery. Seller will pay the return shipping costs if the return is a result seller’s error. If the item is returned for any other reason the buyer is responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. Seller will credit buyer in the same manner as buyer’s original payment within 7 days of receiving the returned item. For questions
Hover Davis MPF Feeders for Fuji IP and QP2 Machines. This is a mixed bag of sizes 16mm to 88mm. All in good working order. These feeders are clearance priced at 175.00 each. Minimum mix and match purchase is $1000.00. Feel free to contact us for your size requirements. Shipping rates are for Continental US Locations only. Contact us for other location options SMT Parts. Inc. offers one of the largest selections of OEM original, used, and aftermarket replacement parts in the world, and we ship globally Our mission at SMT Parts. Inc. is to earn and keep your business. All of our products are backed by a 100% satisfaction guarantee. If you are not completely satisfied with your purchase, we will promptly and cheerfully provide an exchange or refund. SMT Parts. Inc. constantly strives to improve the experience of our customers, so your feedback ... moreand suggestions are welcomed. We look forward to having the opportunity to serve you!
Universal HSP/ Sanyo TCM chip feeders. a variety of sizes all at clearance prices 1000.00 minimum purchase on these. Mix and match. Free shipping in continental US if you take all. MODEL SIZE QTY CT-0890 8x2 paper 7 CT-0896 8x2 paper 13 CT-0891 8x4 paper 30 CT-0892 8x4 embossed 29 CT-1261 12x8 embossed 14 CT-0860 8x2 paper 1 CT-0862 8x4 embossed 50 These are used. But fully functional chip feeders. Shipping rates are for Continental US Locations only. Contact us for other location options SMT Parts. Inc. offers one of the largest selections of OEM original, used, and aftermarket replacement parts in the world, and we ship globally Our mission at SMT Parts. Inc. is to earn and keep your business. All of our products are backed by a 100% satisfaction guarantee. If you are not completely satisfied with your purchase, we will promptly and cheerfully ... moreprovide an exchange or refund. SMT Parts. Inc. constantly strives to improve the experience of our customers, so your feedback and suggestions are welcomed. We look forward to having the opportunity to serve you!
Fuji KG Motor feeders. These Fuji Motor Feeders are for Fuji NP platform. QP 132 machines and QP-3s that have PFUs instead of MFUs. These Feeders are in Excellent Condition. Three different sizes now available. 17 EA. KG-0804 W8 x P4 DUAL EMBOSSED W/O REEL COVER PART# AKGAA-0100. 10 EA. KG1200 W12 x P4. P8, P12 SINGLE EMBOSSED W/O REEL COVER PART# AKGBA-0100. 6 EA. KG1600 W16 x P4. P8, P12, P16 SINGLE EMBOSSED W/O REEL COVER PART# AKGCA-0100. LISTED PRICE IS FOR EACH. CONTACT US IF YOU WANT TO MAKE AN OFFER FOR SOME OR ALL. Shipping rates are for Continental US Locations only. Contact us for other location options SMT Parts. Inc. offers one of the largest selections of OEM original, used, and aftermarket replacement parts in the world, and we ship globally Our mission at SMT Parts. Inc. is to earn and keep your business. All of our products ... moreare backed by a 100% satisfaction guarantee. If you are not completely satisfied with your purchase, we will promptly and cheerfully provide an exchange or refund. SMT Parts. Inc. constantly strives to improve the experience of our customers, so your feedback and suggestions are welcomed. We look forward to having the opportunity to serve you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-141bf8c6dfe-0x101-
Zevatech 570L with teach Camera. This unit is in good running order, never gave us a problem. I have a video of it running 10-15-13. Included: 4 feeder bases 6 nozzles 1 vibratory base with 9 lanes 1 waffle tray holder, 3 6 slot feeder banks, 1 32 slot feeder bank, 38 8 mm feeders pneumatic, 3 12mm feeders pneumatic, 4 12mm feeders, electro pneumatic. Machine can be loaded on site or taken to craters for skidding at your request.
Assembleon MG-5 Pick and Place Include 25 Feeders 2010 Vintage Type: PA131430 Nc: 946601314301 No: FFPF030Y10020 200/208/220/240/380/400/416V 3 Ph 50/60 Hz The MG-5 is a flexible mounter that combines speed with superior performance. With a single placement beam. 5 inline Z controlled linear heads and a new recognition system the MG-5 can achieve speeds up to 20,000 components per hour. This machine is built around a very rigid, vibration-free frame for improved stability and perfect for around the clock production. 45mm upward viewing camera Maximum output per hour: 20k Placement accuracy: 50 micron for chips. 30 micron for QFP Maximum component range: 3.94 x 1.77" Maximum board size(LxW) 22.6 x 18.11" Tape feeding positions: 96 Video of machine placing parts: http:youtu.be/a8JJdihAOYQ Buyer is responsible for shipping. Product ... moreFeatures and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Universal Instruments Corp. 16mm Multipitch Feeders. The Manufacturer's Description. Universal Instrumens Corp. 16mm multi-pitch feeder At the time of the posting we had available 10 The feeder pictured is a good example of what they all look like. However we will send the exact photo of the ones ordered The are 4ea. of UIC P/N 47475804/47175801 1 each P/N 47175802/47175804 All sold Tested AS-IS/WHERE-IS Asset# 110892/BA. Calibration. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible ... morefor the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
Philips/ Assembleon Opal Xii Fine Pitch Pick and Place System 2003 Vintage; Installed late 2003 Condition is very good. Type: PA131402 Nc: 946601314021 No: FFPR310Y10015. 4 head placement system 30 tray LCS tray feeder for IC and BGA parts(40K option! Capable of 01005 up to micro bga components Has GridLock control system and control box installed- currently no supports included. 10 Feeders. Optimal output per hour: 11.6k PIC 9850 output per hour: 9.6k One single beam with 4 super fine heads Placing accuracy at 3 sigma: 50 micron for chips. 40 micron for QFP's Component range: 01005(0402) to 45 x 100mm(BGA. UBGA, CSP, Connector, Odds) Maximum board size(L x W) 460 x 440mm(18.1 x 17.3" Minimum board size: L x W) 50 x 50mm(2 x 2" Footprint(L x W) 1650 x 1408mm(5.4 x 4.5 ft) Video of machine placing parts: Buyer is responsible ... morefor shipping. Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Philips Emerald X Pick and Place Includes: 10 Feeders Reject Belt Feeder Tray. Options include: Coplanarity sensor Single area CCD camera Optional CCD camera with side illumination. 2000 Vintage Only 7238.8 hours Type: PA131302 Nc: 946601313021 No: FFPK043Y10018. The Emerald-X is a fine pitch placer that can handle a wide range of components at speeds up to 4.000 QFPs per hour. The machine is built around a very rigid, vibration-free frame for improved accuracy and long-term stability and is perfectly suitable for round-the-clock production. The GEM Emerald-X features a high precision placement beam carrying two heads with automatically exchangeable nozzles. The placement beam moves in X/Y direction with two Z-servo controlled placement heads for stress-free placement of parts up to 20mm high. While the board and component feeders are stationary. ... moreA flexible board transport system enables the Emerald-X to handle virtually any type of PCB. With or without tooling pins. Board conveyor width is automatically adjustable. Allowing board dimensions up to 460 x 440mm(17.9" x 17.2" to be handled. The vision system with Line Array camera allows fast and accurate“on-the-fly” alignment of a wide range of components from 0201 up to 32mm square 0.5mm(20 mil) pin pitch QFPs. Dark background BGAs. ΜBGAs ans CSPs with ball pitches down to 0.5mm(20 mil) and ball diameters down to 0.3mm(12 mil) can be recognized with the use of new developed illumination unit which allows measurement of ball positions and dimensions. The vision system detects missing. Bent or irregular spaced leads or BGA balls; faulty components are rejected. Optional single area CCD cameras extends the component range from 32mm square ICs with lead pitches down to 0.3mm(12 mil) to 45mm square QFPs with lead pitches down to 0.4mm(16 mil) and 54mm square QFPs with lead pitches down to 0.5mm(20 mil) Just 6 nozzle shapes are required to cover the specified SMD range. High output levels are therefore achieved. As the need for nozzle exchanges is minimal. A
Very good condition. Minimal use, complete, tested and production ready. Assembleon FV Series 8x4 Feeders. Additional quantities and sizes available. This is priced for a Lot of 10 Feeders. FOB: Edina. MN 55439.
One feeder cart for CP6/CP7 feeders. Holds up to 90 Feeders No Feeders Included Steel Frame Actual Net Weight: 120 LBS Dimensions: 42" H] × 76" W] × 18" D] Ship from 95035. Buyer is responsible for Freight arrangement. or local pickup.
This lot includes 58 FUJI Feeders listed below and 2 FUJI Carts All in good working condition(7) 8x2-Part Number WD-0802(31) 8x4– Part Number: WE-0804. 7" reel holder, can be used for CP7(10) 8x4- Part Number: WE-0804. 13" reel holder. 3)12x8– Part Number: WE-1208(3) 16x8– Part Number: WE-1608(1) 16x12– Part Number: WE-1612(1) 24x8– Part Number: WE-2412(1) 32x12-Part Number: WE-3212(1) 44x32- Part Number: WE-4432(2) FUJI Feeder Carts portable on wheels Buyer is responsible to arrange Freight from commercial business in Gilroy. CA 95020. If you have any question. Please contact me at 408-455-5017.
Lot of(106) FUJI NP/QP Feeders Dual and sinlge Lane SMT PCB Pick and Place. These feeders are in working condition. Used for Fuji NP platform. $2699 for 106 feeders. That is about $25 for each plus two feeder carts. Any question please contact us at 408 455 5017. KG-0802 BLUE(QTY.2) KG-0804 W8E YELLOW(QTY.11) KG-0804 W8D RED(QTY.20) KG-1200 BLUE(QTY.38) KG-1200 GREEN(QTY.7) KG-1600(QTY.5) KG-3200(QTY.3) KG-2400 YELLOW(QTY.20) 2)FEEDER CARTS. FREIGHT WILL BE ARRANGED AND PAID BY BUYER. PICK UP FROM COMMERCIAL LOCATION. GILROY, CA 95020. SOLD AS IS NO RETURN
This lot includes 51 FUJI Feeders listed below and 2 FUJI Carts All in good working condition(31) 8x4– Part Number: WE-0804. 7" reel holder, can be used for CP7(10) 8x4- Part Number: WE-0804. 13" reel holder. 3)12x8– Part Number: WE-1208(3) 16x8– Part Number: WE-1608(1) 16x12– Part Number: WE-1612(1) 24x8– Part Number: WE-2412(1) 32x12-Part Number: WE-3212(1) 44x32- Part Number: WE-4432(2) FUJI Feeder Carts portable on wheels Buyer is responsible to arrange Freight from commercial business in Gilroy. CA 95020. If you have any question. Please contact me at 408-455-5017.
8 Mydata Automation Feeder Boxes Being Sold Together in a Package. Came offline in good running condition. You will get a quantity of 4 of the TM16 Models and a quantity of 4 of the TM24 Models. See attached pictures. Buyer is responsible for all shipping charges from our Boston. MA location. We can skid. Secure, package, and set up shipping to countries overseas. Please let us know if you have any questions or concerns. Contact Bill at 978-790-2774.
This listing is to purchase(4) Universal Instruments GSM2 Pick and Place Machines in Good Running Condition. Machine are complete and come with Feeder Carts and Feeders listed below. Please see attached pictures. Machine 1- Model Number: GSM2 with FlexJet2- Year 2000-2001- Serial Number: 47576502 10051732, Machine 2- Model Number: GSM2 with FlexJet3- Year 2000-2001- Serial Number: 47576502 10051731, Machine 3- Model Number: GSM2 with FlexJet2- Year 2001-2002- Serial Number: 47576502 10048783, Machine 4- Model Number: GSM2 with FlexJet2- Year 2000-2001- Serial Number: 47576502 10051710, The following 104 feeders are included with 16 feeder carts. 1) 4791_CT0851_8X4_PA(3) 4791_CT0852_8X4_EM_MOD(1) 4791_CT0861_8X4_PA(4) 4791_CT0862_8X4_EM(1) 4791_CT0862_8X4_EM_MOD(1) 4791_CT1650_16XADJ(5) GSM_24X12(6) GSM_24X16(1) GSM_24X8(1) GSM_44X32(7) GSM_47175804_16XMP(1) ... moreGSM_47175901_24XMP(27) GSM_47175904_24XMP(3) GSM_47175905_24XMP(3) GSM_47176002_32XMP(12) GSM_47176003_32XMP(4) GSM_47176102_44XMP(12) GSM_47176103_44XMP(1) GSM_48840801_44XMP(1) GSM_47176201_56XMP(1) GSM_47176203_56XMP(1) GSM_47593002_88XMP. Buyer is responsible for all shipping charges from our Boston. MA location. We can set up to have the equipment skidded. Packaged, crated, and shipped to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill at 978-790-2774.
Samsung CP20 CV Pick and Place Machine with VERY low hours. Rated to do 0402s Run Time Hours 3681, Total on Time 15581 hrs, this machine is in excellent condition, fully operational with full feeder package and everything you need to run production immediately. Compact size 60" x 58" Includes following Qty 69 SB(8mm) feeders, Qty 9 SC feeders, Qty 3 SD feeders, Qty 2 SE feeders Qty 2 vibe feeders, 1 tray feeder Factory Specs Below, Iv added video link shortly showing it do a dry run. 100% Pick up location will be from Craters Dock Zip 85040 Custom skid and wrap. Machine skid 70 x 70 $395 Monitors and feeders 42 x 48 208.25. Compact Sized High Speed Mounter Features:  High Speed of 0.37 sec/chip featuring On-the-fly optical centering  Wide Coverage of component ranging from 1005(0402) to QFP 42 mm  Taking full advantage of today's ... morehigh performance direct-drive motor mechanism  Convenient work environment based on Windows Model CP20CV No. of Heads 2 Head Alignment Unit 2 Linear CCD. Upward Vision Board Size(mm) Max:460x400x4.0(mm)~Min:50x50x0.5(mm) Placement Rate(Tact Time) Chip(sec/chip) 0.37 sec/chip QFP(sec/QFP) 0.85 sec(Line CCD) 1.80 sec(Vision System) Feeder Capacity 104 EA(8mm Tape Feeder) Conveyor Direction LeftRight(Option:RightLeft) Front Side Placement Accuracy Chip(mm) 0.1mm(0.004 inch) QFP(mm) 0.08mm(0.003 inch)Linear CCD 0.05mm(0.001 inch)Vision System Component Range 1005(0402) ~ 42mm(0.5mm Pitch) Power Requirement 100. 110, 200, 220, 240V Single Phase 50/60§Ô 2.6kVA(Max) Net Weight Approx. 1.100kg Feeder Type 8. 12, 16, 24, 32, 44, 56mm Tape Feeder Belt/ Vibration/1 Step. 20 Step Tray Feeder Air Consumption 110N/min
Up for sale is a 12mm Fuji multi-pitch electric feeder. 24VDC.
DIMA SMT Systems Dymaxion SMCS-1000 Pick and Place machine Includes 80 Feeders and Tray Sequencer. S/N:032200100009 220-240V 50/60 Hz 3200 W 192 8mm feeder positions with no reduction for 12mm 10000 CPH. Dual V2r placement pipettes, Intelligent feeders, Dimasoftr one key operation software. Linear motor technology, Auto width adjust pass/thru conveyor. Off line programming and optimization, Approximately 15.000 hours. Affordable placement solution for medium level. Prototyping and medium to large but flexible production runs. Economical placement system for flexible production runs. Capable of handling today's whole range of SMD components without exception. Tact time: 0.32 sec/chip with on the fly vision system 0.42 sec/QFP with Area Large Component CCD Camera. Nominal Placement rate: 6000- 9000 cph. Applicable components: 0402-Chip. ... moreMelf, SOT, SOIC, 0201 t.b.e. TSOP, TNT, PLCC, QFP, BGA, uBGA, LCC Field of view 57 x 57 mm Fine pitch down to 0.3mm. Mounting accuracy(X.Y)3: 100u on Chip placement/ 40u on Fine Pitch Placement. Machine dimensions and weight: 1700 mm long x 3200 mm wide x 2100mm tall(with light tower) Footprint of machine including feeders mounted in machine Weight: 2000 kg without feeders/ 2500 kg with full feeder configuration http:www.clever.ru/techno/english/dima/Dymaxion_specifications.PDF. Buyer is responsible for shipping. Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. International shipping is available on most items please ask before bidding. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and
8x 4 mm F eeders. Single, Embossed- MV2F Style- Feeders are sold As-Is. 10 pieces in stock. Must provide UPS or FedEx account number for shipping. Or pay separately for shipping cost. States of CA must also include sales tax
Hover Davis Feeder Model MPF02-24 See attached pictures and information below 24mm Size- Over 65 Available For Sale- All in Good Condition We have other sizes available too! Quantity discounts available. See our other items. Buyer is responsible for all shipping charges from Boston. MA location. We can skid. Crate, package, and ship to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill- 978-790-2774
Hover Davis Feeder Model MPF02-32 See attached pictures and information below 32mm Size- Over 18 Available For Sale- All in Good Condition We have other sizes available too! Quantity discounts available. See our other items. Buyer is responsible for all shipping charges from Boston. MA location. We can skid. Crate, package, and ship to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact Bill- 978-790-2774