In 
 
Order by: 
Available to: 
Price: 
 - 
$
1,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
Vision Engineering Stereo Dynascope. Model: TS-3. This stereo inspection system is sold as pictured with Bausch& Lomb Boom. Boom is somewhat challenging ... moreand we believe it may not be correct on for this unit(fails to secure tight) We did not recieve light kit, but other wise tool is in good shape. More information here: http:karenmadison.com/vision-spex.pdf CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
1,000
1d 22h 19m 1s
0 bids
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
$
1,995
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Reidsville,NC,USA
$
4,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
THIS IS A VISION ENGINEERING STEREO DYNASCOPE HEAD TS-2 COMES AS SHOWN/ Shipping on this item is 38.00 to the lower 48 states. If you are from overseas ... moreor Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item23.
$
329.99
Buy It Now
Free Shipping
Condition: Used
Location: Morgan Hill,CA,USA
$
35
Buy It Now
$15.6 Shipping
Condition: Used
Location: Bosque Farms,NM,USA
$
27,000
Buy It Now
$0 Shipping
Condition: Used
Location: Monterey Park,CA,USA
$
175
Buy It Now
Free Shipping
Condition: Used
Location: Wilmington,NC,USA
$
175
Buy It Now
Free Shipping
Condition: Used
Location: Wilmington,NC,USA
$
349
Buy It Now
Free Shipping
Condition: Used
Location: El Paso,TX,USA
$
45
Buy It Now
Free Shipping
Condition: Used
Location: Wilmington,NC,USA
$
200
Buy It Now
Free Shipping
Condition: New
Location: El Paso,TX,USA
$
174
Buy It Now
$0 Shipping
Condition: New
Location: Comstock Park,MI,USA
SquareTrade © AP6.0 B R O U G H T T O Y O U D I R E C T L Y F R O M?s SALES@RAGECAMS.COM(616)205-5440 50ft cable length with 3.6mm lens runs on 12v ... moredc(power supply not included) NEW CUSTOM DESIGNED MODEL JUST IN! BRAND NEW CHIMNEYCAM PLUG& PLAY GREAT QUALITY FOR THE PRICE. The camera has 50 ft extension The cable can be extended longer if needed to your specifications. KEEPING PRICES LOW TO HELP THE NEEDY IN THIS BAD ECONOMY! new design LEDS UNDER THE LENS CAP 2 BRIGHT WHITE LEDS SHOW FULL COLOR IN 0 LIGHT. ITS REALLY A GREAT SET UP FOR THE PRICE. NO GHOSTING BLACK& WHITE WASHED OUT INFRARED LEDS THAT MAKE INSPECTIONS HARD TO IDENTIFY PROBLEM AREAS. DUAL LEDS WITH MACRO FOCUSABLE 3.6mm LENS First. Twist off your lens cap. The lens will easily focus to infinity. YOU CAN MACRO VIEW& USE THIS CAMERA TO FOCUS WITHIN AN INCH OR LESS LIKE A MICROSCOPE FOR EXTREME CLOSE UP ON CIRCUIT BOARDS OR ANYTHING. 4 20 R E S O L U T I O N C O O L D E A L Brand IN THE BOX-TESTED! ALSO INCLUDES BASE BRACKET. 3.6MM LENS 420 RESOLUTION, 1/4" RAZOR SHARP CCD SENSOR. WE CAN CHANGE THE LENS FOR YOU IF YOU NEED A DIFFERENT VIEW FOR FREE. FROM 3.6MM, 6,8,12, OR 16MM FOR NO EXTRA COST! LET US KNOW YOUR NEEDS. OR BUY EXTRA LENSES& CHANGE THEM YOURSELF EASILY! NEED CABLE OR SOMETHING DIFFERENT? JUST ASK. WE CUSTOMIZE ORDERS ALL DAY LONG HERE. PICK ANY LENS FROM THE CHOICES BELOW: EMAIL THE ONE YOU WANT IN THE PAYPAL NOTES TO SELLER OK. LENS EXAMPLES SHOWN BELOW. Free PRE-INSTALLED WIDE 3.6mm HI-GRADE GLASS LENS INSTALLED 82 DEGREE FIELD OF VIEW FOR GREAT IMAGE STABILIZATION! OR PICK YOUR FAVORITE LENS FROM 2.8MM. 4.3MM, 6MM, 8MM, 12MM, OR 16MM. INDICATE WHAT LENS YOU WANT WITH YOUR PAYPAL PAYMENT. See our lenses in action now on youtube! http:www.youtube.com/profile?user=smkdog435&view=videos We'd greatly appreciate it if you left us positive feedback& 5 stars on all feedback categories. When leaving detailed seller ratings. You must leave them at the same time you leave your overall Feedback rating and c
1
 In 

Past Items  
 
THIS IS A VISION ENGINEERING ILLUMINATOR GOOD CONDITION/ Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it ... moreis a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item1. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e09f0993d-0xfe-
THIS IS A VISION VS7 INSPECTION SYSTEM COMES AS SHOWN/ Shipping on this item is 28.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is ... morea item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item20.
THIS IS A VISION MANTIS MICROSCOPE STAND COMES AS SHOWN WITH CRACK IN IT/ Shipping on this item is 22.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours ... moreof purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item10.
THIS IS A VISION ILLUMINATOR MICROSCOPE PART UNABLE TO TEST/ Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if ... moreit is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item2.
THIS IS A VISION MACRO DYNASCOPE 5D COMES AS SHOWN/ Shipping on this item is 38.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a ... moreitem that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item30.
THIS IS A VISION ENGINEERING MANTIS FX BASE COMES AS SHOWN/ Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if ... moreit is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item7.
THIS IS A VISION MACRO DYNASCOPE 5E CRACKED SIDE COMES AS SHOWN/ Shipping on this item is 38.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item30.
THIS IS A MANTIS FX BASE COMES AS SHOWN/ Shipping on this item is 28.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that ... moremust be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item24.
THIS IS A VISION MACRO DYNASCOPE 5D HEAD COMES AS SHOWN/ Shipping on this item is 38.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it ... moreis a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item25.
Hi and welcome! You are bidding on an EXCELLENT CONDITION Mantis Vision Engineering microscope. Along with 4x and 8x objective lenses. FREE SHIPPING WORLDWIDE. WITH NO EXCLUSIONS! YOU GET A TRACKING NUMBER Thanks for looking. Please bid with confidence, this is an honest sale from an electronic hobbyist and engineering enthusiast. Please contact me for any questions you may have, I am delighted to answer and will do so in the shortest of time! GOOD LUCK! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e84067ca0-0xf0-
This Vision Engineering 4x Objective Lens for Mantis Magnification System is used but in good condition. Actual pictures of listing item. Winner will receive what shown in the pictures. Normal wear and tear from normal usage Payment We accept payments via PayPal only. Shipping Shipping cost will NOT refundable. Item will be shipped within 24 hours after payment clear. Multiple items will be shipped in single package. NO combine shipping cost. Please check email for tracking number after payment clear. Return Shipping cost will NOT refundable. All return item is subject to 15% restocking fee if NO TROUBLE FOUND(NTF) There is NO warranty. NO return and NO refund for“AS-IS” or“For parts or not working” items. Before returning any merchandise. Request a return material authorization(RMA) number by contacting us via the'Ask Seller a Question' ... morelink and we will reply to your email within 24 hours. Emails received on weekends will be answered promptly the following business day. Once you have an RMA number and shipping information, send us your return with the RMA number marked clearly on the outside of the box. Shipping fees for returns are your responsibility. Contact Have a question? Contact us via the'Ask Seller a Question' link and we will reply to your email within 24 hours. Emails received on weekends will be answered promptly the following business day. Powered by The free listing tool. List your items fast and easy and manage your active items.
VISION ENGINEERING STEREO DYNASCOPE MODEL: TS-3 W/ TABLE TOP. LIGHT SOURCE, AND OBLIQUE VIEWER REMOTE CONTROL LIGHT SOURCE MODEL: T53/227T( I DONT HAVE POWER SOURCE FOR THIS SEE PHOTOS FOR ADAPTER CONNECTION) TABLE TOP W/ MOTOR CONTROLLER(30"D X 33"W) EVERYTHING OTHER THAN POWER SOURCE SEEMS TO BE IN GOOD CONDITION WHEN PLUGGED IN SOLD AS-IS BUYER PAYS FOR AND ARRANGES SHIPPING
THIS IS A VISION ENGINEERING MACRO DYNASCOPE 5D UNIVERSAL INSPECTION MEASUREMENT SYSTEM LOOKS IN GOOD CONDITION/ Shipping on this item is 98.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items ... morewill be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item111.
THIS IS A 0609-468 MICROSCOPE HEAD COMES AS SHOWN/ Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a ... moreitem that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item5.
THIS IS A NICE VISION MANTIS MACRO HEAD GOOD CONDITION LED TOT13/ Shipping on this item is 28.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item10.
Up for sale is a Vision Engineering 15V 150W Power supply unit. Power supply is in good used condition with normal nicks and scraps you'll find on a lab used item. Unit is sold as shown with line cord only. Sorry. I don't know what models this will support. Please ask all questions before purchasing. Satisfaction guaranteed. Buyer may return within 10 days or receipt for a refund(less shipping charges) Please use shipping calculator for actual delivery costs. Although the Ebay shipping calculator shows UPS we will ship via FedEx ground. If you need it quicker. Please contact us. All items are packed with care. I've been buying and selling on Ebay for many years. I try to treat my customers like I would like to be treated as a buyer. If you have any problems with any items purchased through our store. Please contact us immediatly ... moreand we will make it right. Before you email me a question. Please check here for some canned answers to some very common questions: Will you end the auction or sale early? The only way to end the sale early is to"Buy it Now" For the safety of both parties. I do not sell outside of Ebay. Will you ship overseas or to Canada? It may be possible to ship overseas or to Canada depending on the item. Please contact us for details. Do you have any manuals. Accessories, etc for the unit? I do a very good job of listing everything that is included with an item. Everything included is described in the listing and/or shown in the photograph. I'm local. Can I pick up the item? In most cases. No. Only for large bulky items will I consider local pickup. Will you sell a accessory separately or make a copy of a manual or software for me? In most cases no. The accessories provided go with the unit we are selling. If we have any extras they would be listed in our store. We do not copy manuals or software. I will try to answer all questions as fast as possible. Please allow at least 24 hours for answers to most questions. I appologize for all the rules. However. I find it necessary
Vision Engineering 15V 150W Power Supply. I believe this works with a 15V Halogen Light system for a Vision Engineering microscope but I have no way to know for sure. If you're looking at it then you probably know for sure and know that they probably want a few hundred bucks for this replacement. No way to test. Sold as-is.
MOUNTING ARM MANTIS VISION ENGINEERING SCOPE ARM ONLY. NO BASE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1410acf5dbc-0x100-
Welcome! Great Vision Engineering Mantis FX Inspection Microscope with 2x and 4x objectives. FREE SHIPPING WORLDWIDE* Thank you and good luck!
Item Sold AS-IS. No Warranty, No Returns- Vision Engineering Model TS4 Stereo Dynascope*POWERS ON* Item has been powered on and is responses. As shown, but no further tests were done. This item is non-operational. Or its operational condition cannot be determined. If you have any question regarding this unit please feel free to contact me and I will do my best to answer your questions. Please read the terms of sales below before you purchase or submit a Best Offer. Included is only what is mentioned. 1 unit as shown in picture. Picture represents the actual item. No other cables. Parts, power cords, power adapters, software or any other accessories included. ~150 Pounds in a box with packaging materials ============================================================================ Terms of Sale Payment Options PayPal only or contact us for ... morepayment methods to pay on pickup. Bank transfers or payments using a Cashier’s Check may be available. Contact us for additional information and fees. RETURNS NOTICE- This item is sold As-Is No Returns The sale of this item is final; we will not accept a return under any circumstances. Please examine the item closely. If you need additional information. Photos or would like for us to perform some basic tests to determine the condition please feel free to contact us prior to your purchase. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FedEx does not ship to PO Boxes- please provide us with a regular address prior to completing the transaction. International Shipments Please allow 2-3 business days to process international shipments. All International shipments are shipped by
THIS IS A VISION ENGINEERING MICROSCOPE ILLUMINATOR GOOD CONDITION/ Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item3.
REMOVED FROM NEW UNIT TO UPGRADE TO AN 8X LENS. GREAT SHAPE.
You are bidding on a used Vision Engineering Mantis Microscope. This item is used and has some scuffs and cosmetic issues. The lights work and the unit comes with a 2x and a 10x objectives. both of the covers for the lights are missing. The 2x objective and the 10x looks pretty good only minor imperfections. When looking through the viewer you don't notice any. The mounting base is included as well. The unit works just fine and focus works as advertised. This unite is working with 110V&220V Free shipping only in United State(50 state) No return please check all pictures before bidding.
REMOVED FROM NEW COMPACT UNIT TO UPGRADE TO AN 8X LENS. GREAT SHAPE.
92476B1/ eO/pR4 Vision Engineering Mantis Scope with Arm.120-240Vac, x2,x4 Lens,Used Item Description Vision Mantis. Input: 120/240 VAC. Arm Weight ~ 3.2Kg(34 x 54(H) Head ~ 3.2Kg: x2, x4 Vision lens. Size(Est) 73 x 60 x 23 cm(Averall) 41 x 34 x23(Head) 34 x 54 x 20(Arm) Weight aro 6.5 kg(unit only) 8.5 Kg with packing. Item Condition Used. Good physical condition. Connectors Ok. Mechanical ok. Lens looks clean. Minor dirt marks and scratches Body. Arm rear join plastic cover loosen and with tape holding it. Minor yellewise on plastic casing. Unit taken from factory system. Power on with 230Vac. Fan working, Light functioning and unit can be focus. This unit is given 14 days DOA if it does not perform as standard or what we described. We assume buyer will know how to operate or it functionity prior bidding. Not Include the problems or issue ... morewe have listed here. No physical damage and clean(Actual unit shown in photo) We did not perform full functional check. AS-IT condition. The observation is to help buyer to made best judgement prior bidding. No other parts or accessories except listed in the listing. Return Policy(For Return Accepted Item Only) Item with DOA. will refund purchase price minus freight cost(upon returning to us) if item does not perform as it standard function or not as what we described here. For Free shipping. A standard Freight cost will be deducted from selling price. Buyer Pay Return Freight if item send back for refund. All issue MUST feedback to us within the DOA period. otherwise. It will consider accepted. For Free Shipment item. A freight charge of USD 20/= will be deducted if item is return for refund. GST GST Apply for local delivery in singapore. Oversea delivery exempted. Freight Standard Freight by Registered Post Service. Transit detail: 5 to 7 working days for Asia. 10 to 15 working days for US, EU. Tax not included. Freight charge may change according to courier rate without notice. Freight to Singapore Locally: S$ 15/=(USD 12/=) for posting to Singapo
Vision Engineering Quadra Check QC-300 Inspection Microscope Video measuring. With Manual and 2x and 5x lenses. Working System last time it was used here in our lab. Sold as is. From MFG: Vision Engineering’s Merlin 2-axis video measuring system combines a state-of- the-art touch-screen video microprocessor with amazing simplicity. To deliver superb accuracy and repeatability. No matter how many operators use the system. Vision Engineering’s Merlin video measuring system provides fast and accurate 2-axis measurement of precision component parts, suitable for both shop-floor quality control and manufacturing inspection applications. With a high precision 150mm x 100mm measuring stage. Merlin is ideal for measuring 2-D features of small. Intricate parts. From simple manual. Single-feature operation to multi-point video edge detection measurements. ... moreMerlin combines amazing simplicity with high accuracy and repeatability for a wide range of measuring applications. The simplicity of Merlin allows for reduced training time. Minimised operator errors and increased productivity. Video Camera 1/3” CCD(795 x 596 resolution) with composite video output Power supply- DC +11.4~12.6V(12v ± 5% Low light sensitivity- 0.35 LUX at F2.0 Illumination Surface illumination provided by 20 x high intensity LED(10.000 hours) Substage illumination provided by 1 x high intensity LED(10.000 hours) Measuring Stage 150mm x 100mm Factory-installed non-linear error correction(NLEC) calibration to ensure optimum accuracy. Traceable to International standards for the purposes of ISO9000 1μm encoder resolution 10kg max. glass plate load
Wonderful Scope a serious hobbyist for the likes of stamp and coin collecting. I bought it used myself from a stamp collector's estate sale. What I like most about this microscope is the depth of working space under it. You don't feel cramped working with your instruments. I primarily used it for my seed ID work in a home office. Due to it's size and weight I'll ship in 3 boxes to make sure it arrives safe on your end. Mainly the large head and the stand plate being the heaviest. It is packed well with individual parts wrapped securely& tight so that parts can not shift during shipping. NO IDIOT PEANUTS) I don't have a T3 manual but include a copy of a T4 manual. There is a parts and assembly diagram that's very clear how to re-assemble. Just follow the diagrams and consult the photo's to see how it slips back ... moretogether and into place and mostly it's quite obvious. It might help to have two people one to hold heavier pieces in place while the other person slips items into position. I cleaned it up when I got it and refinished the steel stand plate which needed refinishing& the plate still looks great. Overall this scope has been used well and some wear is obvious and some pitting and oxidation to screws etc are visible but never caused any problems as to it's function or purpose as a scope. It ratchets up and down in magnification no problem. The light& fan work and again it's never been a problem over the 8 years I've used it. It has the camera port but not the tube for a camera. Copy of a T4 manual is included. This sale includes the stand& all parts attached to the Scope in the photo. No not the table: though it's been there long enough the table probably feels an attachment. It is sold as is in as much as it is an obsolete no longer made scope that has been in use and seen industrial use. I'm selling because it is just too big for my tiny 10 by 11 foot home office. I do graphics& make booklets& custom photo albums& the scope is BIG
Shipping included for this wonderful Scope. That's huge in itself! A great scope for the serious hobbyist for the likes of stamp and coin collecting& jewelry making as well as the industrial world it was made to serve. I bought it used myself from a stamp collector's estate sale. What I like most about this microscope is the depth of working space under it. You don't feel cramped working with your instruments. I used it for my seed ID work in a home office. Due to it's size and weight I'll ship this using several containers. Mainly the large head and the stand plate being the heaviest will be shipped in separate containers to avoid injury to themselves or each other. Everything will be packed well with individual parts wrapped securely& tight so that parts can not shift during shipping. NO IDIOT PEANUTS) I don't ... morehave a T3 manual but include a copy of the T4 manual. There is a parts& assembly diagram that's very clear to re-assemble. It might help to have two people one to hold heavier pieces in place while the other person slips items into position. My work didn't involve much if any wear and tear to the scope. Overall this scope has seen some wear which is obvious. There is some pitting and oxidation to screws etc. visible but never caused any problem as to it's function or purpose as a scope or overall looks. It ratchets up and down in magnification as it should without issue. The light& fan both work and never been a problem over the 8 years I've used it. It has the camera port but not the tube for a camera. Copy of a T4 manual is included. This sale includes the heavy duty stand& all parts attached to the Scope in the photo. No not the table: though it's been there long enough the table probably feels an attachment. It is sold as is in as much as it is an obsolete no longer made scope that has been in use and seen industrial use at some time. I'm selling because it is too big for my tiny 10 by 11 foot home office. I do graphics& make book
Selling a Vision Engineering MIcro Dynascope Model- 5E head as seen on the pictures. The item is used and untested. It should work. But we don't know, so we sell it as parts. Shipping from Germany. Local pickup in Munich also possible. Please feel free to contact us if you have any questions. Please also have a look on our other auctions.
You are Bidding on 4 Objectives Quantity two X10 and quantity two X8 Matis Vision objectives.
ebay template Item Description Why buy from us? Really fast checkout Vision Engineering COBRA Stereo Zoom Microscope w/ Fiber Illuminator& X-Y Table Vision Engineering COBRA Stereo Microscope Industrial stereo'Expanded-Pupil' microscope With Fiber Optic Illuminator& X-Y Table Vision Engineering's new COBRA offers enlarged. Expanded Pupil" eyepieces. This increases the viewing distance between the eye and eyepiece, reducing operator fatigue. Zoom Magnification is 6X-40X with a working distance of approximately 2.5 inches. The COBRA has a new ergonomic design: Microscope users can now work in a more upright position and even wear eyeglasses. COBRA offers freedom of head and body movement not available with conventional microscopes. This increased comfort and ease of use improves productivity and reduces errors. This ... moremicroscope includes an optional moveable X-Y platform. Fiber optic ring light, and auxiliary adjustable stage. This microscope is useful in a wide range of applications including: Electronics An accurate tool for the inspection assembly. And rework of electronic components with complex surfaces Industrial Ideal for the inspection and assembly of a wide range of materials including metal, plastic, rubber, or ceramic that require high magnification and depth of field Life Sciences Designed for viewing and processing specimens and substrates from a variety of scientific specialties that require superior resolution Features include: Freedom to Vary Head Position High Resolution Freedom to Wear Glasses High Contrast Color Fidelity Stereo Image Variable Zoom Optical specs: Working distance: 2.5" Illumination: 150W/21 Volt ring light Zoom Magnification: 6-40 Zoom Ratio: 6.6:1 What is included: COBRA Microscope 150 watt Fiber optic ring illuminator system(power cord included) Desk/bench stand X-Y table Auxiliary adjustable platform, Condition: The photos demonstrate this unit is in very good cosmetic condition. There is no damage. Old inventory stickers, adhesive residue, names/num
Vision Engineering- Original MANTIS Microscope on portable wood and black formica base. ON IT'S OWN BASE! No need to clamp it to the desk. No holes to drill! Allows easy movement from place to place. Includes 2X and 6X Mantis lenses- TWO LENSES! Very good. Clean, well-maintrained condition- everything works, lights, fans, lens rotor, etc. NOTE: The(2) thru-the-lens pictures are the best that I could do with my hand-held camera. these pictures are only intended to give you an idea of the 2X and 6X magnification abilities. When you look through the Mantis with your eyes. The view is perfectly clear, as it should be. NOTE ON SHIPPING: I'm not convinced the ebay shipping cost calculator is correct. It seems high to me. That said, I only intend to charge the actual shipping cost and will refund any/all overages collected back to the buyer ... morewhen the actual shipping cost is known(at the time of shipment) In addition to the shipment cost the correct/proper shipping insurance will be added. Please contact me with any questions- you are invited to make an offer.
VISION ENGINEERING MANTIS INSPECTION MICROSCOPE W/ X10 OBJECTIVE Description Vision Engineering Mantis Inspection Microscope Listing includes: Mantis Inspection Microscope with powered stand& with mounting peg. Vision x10 Objective Condition The microscope is in overall good physical condition. The image looks ok when looking through it. The lights do work without any problem. The fan is working. The objectives is good condition as seen in the the pictures. SHIPPING Domestic: USPS/FedEx Ground. Hawaii and Alaska pay extra. International: Email for quote. PAYMENT Paypal Please contact us for other options*California buyers pay sales tax unless a resale exemption certificate is provided. GENERAL POLICIES No return. International buyers held responsible for all import/ export duty fees. Payment must be made within seven(7) days of auction's ... moreend. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-148c1b23ca2-0x115-
Vision Engineering Hawk Dynascope Non-Contact Measuring System- Inspection Microscope with QC-200 Microprocessor. 3 Axis, Two Vision Engineering 100W Fibre Optic Light Sources. Mounted on an Ergo Station with adjustable height. Refer to pictures for more information. 2 complete units available for sale. Priced per system Vision Engineering Hawk Dynascope- s/n: K09903. QC-200 microprocessor- s/n: L25004 Vision Engineering Hawk Dynascope- s/n: K09902. QC-200 microprocessor- s/n: L25003 Location: San Francisco. CA Contact Justin at 503.464.6013 with any questions. WORLDWIDE FREIGHT SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Buyer responsible for any required rigging. Skidding or crating charges. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED ... moreWITHIN 72 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. SO PLEASE COMMUNICATE WITH US. Shipping Options: Smaller Items: Minimum shipping charge of $15.00(unless free shipping is offered) Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. If the item is not onsite with us or needs additional crating. You will be billed time and materials for this service. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds. Since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on most of our auctions. However we are not always on-site where the item is located, so payment in advance may need to be arranged in those situations. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. Large machi
Gesswein Vision Engineering Mantis Inspection Viewer 10x and 2x lenses Clean Large Viewing Screen 3" x 5" Articulating stand with Mounting Base Transparent Shield for locating the specimen Cooling fan 2 Bright lights Serial Number H-05983 115V with cord.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14991fb6887-0x109-
Vision Engineering Hawk Inspection Microscope Dynascope Mono. Non Contact Measuring System with QC-200 Microprocessor High resolution. 3-axis optical measurement, includes. Coloured or transparent plastics. Not Calibrated for Z Axis. Some small scratches on glass surface. Good working condition. Quadra Check Model QC230-HK-AR9-NLEC Macro Objectives 1X. 2X, 5X(10,20,50 power) Extra Bulbs for Light Sources 4 Light Sources K-010 In good operating condition. Will crate carefully to prevent damage from shipping. Returns Anacapa Equipment strives to offer excellent customer service. Please contact us if an item you have purchased is not as expected before going through eBay’s return process. We have an excellent rating and will do all that we can to make you happy with your purchase. If we mistakenly sent the wrong item we will overnight the correct ... moreone. If the item is defective we will issue a refund immediately. We offer a money back return for any item purchased from Anacapa Equipment if it meets the following criteria: If item can't power on. Can't pass self-test or not as described. If we have another unit we can either exchange it or refund your money. Please indicate which you prefer. The returned item has to be in the original packaging. Carefully packaged and insured. We will process the refund as soon as item is received. Return must be initiated within 14 days of receipt. DISCLAIMER: Anacapa Equipment Brokers. Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment purchased. The Purchaser, by purchasing this equipment, indicates their acknowledgment of, and agreement, to the terms of this disclaimer. Please call us at 805 961-4457 for any concerns. B uyer is respons
VISION ENGINEERING VS8 INSPECTION SYSTEM microscope head and other accessories are not included. Only what is pictured is included in the listing. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14a3e8e9ab9-0x10b-
Vision Engineering CamZ digital magnifier. Comes with case. Charger and printed manual. I am selling it AS-IS because I am not sure it is focusing correctly. I may be doing something wrong but I think the pictures should be more focused and crisp. All the buttons and functions work properly. Battery holds good charge, stores images good, zooms properly.It just does not look crisply focus. No returns. Shipping will be $ 7