In 
 
Order by: 
Available to: 
Price: 
 - 
$
27,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Leander,TX,USA
Questions? Call us: 1-877-328-9236. Zeiss Axiotron 2 300mm Video Wafer Inspection Station +Isolation Table Seoul 12" Manufacturer: Seoul Engineering ... moreModel: SEC-2000AT Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Seoul Engineering Condition: Used. This scope is in Good cosmetic condition with just a few minor blemishes on surface finishes(mostly scratches/scuffs on the polished steel) We did not note any flaws in the optics. Except some"cleaning mark" type scratches in the top of the 5x lens. Which do not show up when viewing samples through the scope. The computer has been upgraded to a faster processor with more RAM, and operates significantly faster than it used to do. Notes: This lot is in Good working condition. The only notable problem we found is that the vibration isolation table has a couple of leaks in the airbags. But the table still lifts off and reduces the vibration that reaches the microscope platform. The microscope and motorized stages work great, and the view through the eyepieces is bright and clear. The view through the computer has a smaller field-of-view but it is larger onscreen and so easier to see samples than through the eyepieces. We were able to measure a very small feature on our test circuit(see photos) No other testing was done. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Seoul Engineering SEC-2000AT Inspection system, 20) Spare Philips 7724 lamps, 1) Pile of software installation discs including Windows and Imagescope 2.4, Specifications: Manufacturer: Seoul Engineering Co. Ltd. Model SEC-2000AT Inspection System, Inspection microscope with video measurement& photo capability, All linear axes. Objectives and lighting are remote-controlled, Semiconductor wafer capacity: up to 300mm, Microscope: motorized Zeiss Axiotron 2 Trinocular head with camera mount adapter, HAL 100 illuminator, Objective lenses: 44 23 24 Epiplan NEOFLUAR 5x/0.15 HD ∞/0, 44 29 44 Epiplan 20x/
$
999.99
Buy It Now
$0 Shipping
Condition: Used
Location: Boise,ID,USA
$
84.74
Buy It Now
Free Shipping
Condition: Used
Location: Morgan Hill,CA,USA
Item up for sale is a: Dias IS-22 Inspection Station Item is used and is untested other than what is listed below: Item is untested. The door does not ... morestay shut. So it is taped closed. It otherwise appears to be in good physical condition. If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. ~27 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. Payment options: PayPal only or contact us for payment methods to pay on pickup. Warranty for US shipments: 14 days testing period unless the auction specified as final sale. Buyer must return the product back to the company in a timely manner. Refund upon receiving and inspecting of product and for the cost of the product only. Restocking fee may apply for the new product shipped. Warranty for International shipments: All international orders are final. No exception. Shipping: Buyer is responsible for all shipping cost including returns. Please note for domestic shipments(within US) we ship Fedex ground only. But you can use UPS ground shipping rates(calculated automatically by ebay) to estimate the shipping charges. Actual Fedex ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FEDEX does not ship to PO Boxes- please provide us with a regular address prior to completing the transaction. International Shipments: International shipments are shipped by USPS global express mail if such option is available. We process international shipments twice a week. Please note that Buyer is responsible for all custom duties/taxes/fees where applicable. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs off
$
200
Buy It Now
$158 Shipping
Condition: For parts or not working
Location: Gilroy,CA,USA
$
299.99
Buy It Now
$0 Shipping
Condition: Used
Location: Laporte,CO,USA
$
500
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Goleta,CA,USA
$
999.99
Buy It Now
Free Shipping
Condition: Used
Location: Van Nuys,CA,USA
Leitz Laborlux 12HL Inspection Microscope consisting of: Model: 020-435.034 GMBH Laborlux 12HL-+ Leitz 150 watt Power Supply Xenon Light 120V. 1Ph, 60Hz, ... more6 Amp. Objectives: Leitz 5x/0.09, Leitz 10x/0.20, and 50x/0.85- Eyepieces: Periplan Leitz GF10xm-Center Eyepiece 23.2, Stage: 11.75" x 6.88" 5.5" glass inlay) Stage: manual x,y,z adjustment- Trinocular- Turret: manual adjustment, five place revolving nose piece
$
332.99
Buy It Now
Free Shipping
Condition: Used
Location: Morgan Hill,CA,USA
MediXTec MXT-002 ST Inspection XRAY Control Unit Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue ... moreetc on the exterior casing. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in pictures. Condition: Untested. Estimated Packed Shipping Weight: 55.00 lbs. Notice Regarding Freight: Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Lister: PH Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday. 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday Email Address: Contact us through Ebay's messaging system. Phone: 408-762-7283, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1 business day however. Under certain circumstances please allow up to 5 business days for handling; e.g. special freight crating as well as international orders.
$
3,000
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Goleta,CA,USA
$
5,999.99
Buy It Now
$750 Shipping
Condition: For parts or not working
Location: Rancho Cordova,CA,USA
$
39,999.99
Buy It Now
Free Shipping
Condition: Used
Location: Morgan Hill,CA,USA
Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. PLEASE REFER TO PICTURES. ... moreUnit does not come with accessories unless noted in description. Installed Objectives: ULWD50 ULWD20 IC10 IC5 Olympus BH2-UMA TELETRAC Laser Tracking Auto Focus- Model 8000 Condition: USED. UNTESTED, PULLED FROM A WORKING FAB, PLEASE REFER TO PICTURES Estimated Packed Shipping Weight: Will ship freight Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: DL Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7286, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be
$
17,500
Buy It Now
Free Shipping
Condition: Used
Location: Decatur,GA,USA
Logitech 1WBT2 4" Wafer Substrate Bonding Unit/Bonder Comes with what you see in the pictures. If you don't see it. You probably wont get it. ... moreSpecifications are from Logitech and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. This unit has 2 of the bonding stations removed but I believe it will still function as a single unit. Each bonding unit costs about $6500.00 from the manufacturer to replace. The Unit's Serial Number Tag Reads: Model Number: 1WBT2 Serial Number: 32-08-99 Power Requirements: 110 V. 60 A, Single Phase, 13 A Link to the Datasheet: Link to the Manual: Key Features: Automated process cycle minimizes operator input Excellent wafer to support disc parallelism Touch button control of bonding parameters Bubble free bond 4" 102 mm) wafer capacity Single or multiple wafer capacity(technically this unit is a single unit cause the other 2 stations are removed) Description: Bonding techniques for processing thin and fragile II-VI and III-V semiconductor wafers such as silicon. GaAs and InP require delicate handling procedures. Laboratories bonding such materials need to maintain the highest quality of sample yield and minimize breakage of these expensive materials in wafer preparation process. The Logitech Wafer Substrate Bonding Unit has been designed to meet such stringent requirements. This highly automated machine incorporates both vacuum and pressure bonding facilities. It allows the operator to mount and bond up to three part or whole wafers up to a diameter of 4" 102 mm) prior to further processing. The system produces consistently high standards of wafers to support disc parallelism. Irrespective of whether one large wafer or a number of smaller wafers of differing thickness are being mounted and bonded. Touch button control of the process display on the machine's front panel allows all process parameters to be accurately controlled. This includes a programmable bonding temperature and vacuum to produce the required environment f
$
599.99
Buy It Now
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
Magnetic Elektromotoren AG/ Optem: 4CWAK2-013 Scope Station with Control. The 2nd picture is a label with brief specifications. The 3rd picture is a bag ... moreof accessories. L ooks like unused. A few tiny scratches made at the time took pictures. No knowledge to test. Selling for parts. As-is, no return. This item won't be sold and shipped to Alaska/Hawaii/Puerto Rico/International.
$
9,500
Buy It Now
Free Shipping
Condition: Used
Location: Rushford,MN,USA
$
13,500
Buy It Now
Free Shipping
Condition: Used
Location: Rushford,MN,USA
$
787
Buy It Now
Free Shipping
Condition: New
Location: Glendora,CA,USA
$
11,500
Buy It Now
Free Shipping
Condition: Used
Location: Rushford,MN,USA
$
906
Buy It Now
Free Shipping
Condition: New
Location: Glendora,CA,USA
$
11,500
Buy It Now
Free Shipping
Condition: Used
Location: Rushford,MN,USA
$
945
Buy It Now
Free Shipping
Condition: New
Location: Glendora,CA,USA
$
952
Buy It Now
Free Shipping
Condition: New
Location: Glendora,CA,USA
$
179.4
Buy It Now
Free Shipping
Condition: New
Location: Glendora,CA,USA
$
1,500
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: San Diego,CA,USA
$
987
Buy It Now
$67 Shipping
Condition: New – Open box
Location: Singapore
1
 In 

Past Items  
 
PWS P5CMS Wafer Inspection Station w/ Probe 2 Controller Module. Used unit. Microscope and computer not included with this system. Please contact us regarding international and multi-quantity shipping we are often able to find a better price than the quoted shipping price in the listing. For international shipments buyer is responsible for duties and tariffs. Local pickup in Santa Clara CA. available. Shipping Details: Freight-Only shipping weight 580 lbs. pallet dimensions 51" x 41" x 50" For new and used high-tech and industrial automation parts and systems visit us online at. Or. S.
Item up for sale is a: Dias IS-22 Inspection Station Item is used and is untested other than what is listed below: Item is untested. The door does not stay shut. So it is taped closed. It otherwise appears to be in good physical condition. If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. ~27 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. Payment options: PayPal only or contact us for payment methods to pay on pickup. Warranty for US shipments: 14 days testing period unless the auction specified as final sale. Buyer must return the product back to the company in a timely manner. ... moreRefund upon receiving and inspecting of product and for the cost of the product only. Restocking fee may apply for the new product shipped. Warranty for International shipments: All international orders are final. No exception. Shipping: Buyer is responsible for all shipping cost including returns. Please note for domestic shipments(within US) we ship Fedex ground only. But you can use UPS ground shipping rates(calculated automatically by ebay) to estimate the shipping charges. Actual Fedex ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FEDEX does not ship to PO Boxes- please provide us with a regular address prior to completing the transaction. International Shipments: International shipments are shipped by USPS global express mail if such option is available. We process international shipments twice a week. Please note that Buyer is responsible for all custom duties/taxes/fees where applicable. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs off
6″x6″ xy stage with Heidenhan scales. Olympus optics 5x, 10x, 20x, 50x brightfield objectives, illuminator, trinocular viewing head, digital xy display, table. Crate($350) and freight shipping required for this microscope, cost TBD. Call Glen Pacheco at 408-360-0380 with any questions or concerns.
Configured for reflected and transmitted light. Brightfield, darkfield. 2 12v/100w lamphouses(pnU-ULS100H) U-MPH trinocular viewing head with dual camera ports, SWH10X-H/26.5 eyepieces, UM Plan FL 5x/10x/20x/50x BD objectives, U-DICR module for DIC, Mag changer 1x/1.25x/1.6x/2.0x, U-PS power supply(not shown in photo) Microscope is in excellent condition, please call Glen Pacheco at 408-360-0380 with any questions or concerns. Crate($350) and Freight Shipping(cost TBD) recommended.
Make: Christoph Marantz, Series: N Spec 18(NSpec 18) N Spec18) NSpec18) Model/ Part# M22X-450(M22X450) Serial# M2X0500984, Description: Automatic Optical Inspector, Includes all/only items pictured. All items are"as pictured" I have a surplus store. Some"new" items may not include original packaging. I do my best to keep all quantities correct. All items listed on eBay should be in stock. I do not"broker" parts or anything like that. I have been in the trucking/distribution business for a long time. So you can expect your package to be shipped safely. I insure everything with FedEx. And will also personally back up your purchase(shipping, and the product itself) Powered by The free listing tool. List your items fast and easy and manage your active items.
This listing is for a confocul review station/ laser imaging system. Make: KLA Tencor/ Ultrapoint Corp, Model LIS-1010(LIS1010) Serial# 1010A-123, Input Power: 208 VAC Single Phase 20 Amp 50/60Hz, Description: 200mm/ 8in Patterened Wafer[Defect] Inspection Station, Includes all/only items pictured, Original Price: Approximtely $368.000, All items are"as pictured" I have a surplus store. Some"new" items may not include original packaging. I do my best to keep all quantities correct. All items listed on eBay should be in stock. I do not"broker" parts or anything like that. I have been in the trucking/distribution business for a long time. So you can expect your package to be shipped safely. I insure everything with FedEx. And will also personally back up your purchase(shipping, and the product itself) Powered by ... moreThe free listing tool. List your items fast and easy and manage your active items.
Make: KLA Tencor/ Ultrapointe Corp 200mm/ 8in Patterened Wafer[Defect] Inspection Station Model CRS-1010S(CRS-1010 S/ CRS1010S/ CR1010 S) Serial# 1010S-184 Input Power: 208 VAC Single Phase 20 Amp 50/60Hz, Options. SHRT, CRCT, Int. Cap. 10KA DWG No. 000626. 000627 Date of Mfg: April 2000 Original Price: Approximtely $368.000, Here is some basic information from KLA-Tencor's company profile. With solutions that reduce time-to-market and deliver superior return on investment. Semiconductor manufacturers worldwide count on KLA-Tencor for yield management solutions. We offer the industry's widest range of best-of-breed inspection and diagnostic tools? combined with industry-leading process control expertise and best-practices know-how. We partner with our customers to develop solutions tailored to their objectives. Results: A faster path ... morefrom data to decisions. Quicker response to changes in the market. Consistently reliable. High-performance products. And. Bottom-line, higher profitability and ROI. Here is a little writeup on the Ultrapointe 1010. Taken from a JDS Uniphase buisiness report. The Ultrapointe System Solution The Company established its Ultrapointe subsidiary in fiscal 1992 and began shipping Ultrapointe Systems in fiscal 1994. The Ultrapointe System is a laser imaging system(LIS" that is capable of examining microscopic defects with the ease and speed of conventional microscopes while also offering increased resolution and the ability to provide three-dimensional(3-D" images. This system combines state-of-the-art high speed laser scanning technology. Real-time confocal imaging and digital image reconstruction to allow for 3-D imaging of semiconductor defects as small as 0.1 micron. The Ultrapointe System works in conjunction with automated inspection systems from vendors such as Tencor and KLA to enable semiconductor manufacturers to more accurately identify and classify defects. This defect examina
Just in from a local aerospace company sale is this used X Y Z Inspection Station with National Instruments MID-7654 4 Axis Servo Controller. 3 Hansen Servo Drives mounted on IDC Stages and wired to the controller, the station footprint is 30" wide X 12" deep and stands 17" tall, the whole thing weighs about 150 lbs, see images) LOCAL PICK-UP PERFERRED, Nothing here has been powered up or tested by us. Winning bidder gets own shipping including quotes. Call the 800 number below for a fast free quote. we will add $50 for pallet/ wrap/ strap/ load on your truck. You will need to have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork completely filled out to the fax number below. Weight is Approx#200? Contact Manufacturer for exact weight Standard pallet 36X36X24 We will load ... morewith Forklift Semi Truck Accessible Pick-ups M-F 8am-2pm by apt. only Pick-up location: GWS Enterprizes 28220 Ave Crocker. 405 Valencia. CA. 91355(661) 702-0650 Fax(661) 313-4550 Cell CALL FOR FREE SHIPPING QUOTES(800) 323-5441 X1413. OR USE YOUR OWN FREIGHT COMPANY.
Grohmann Eng. M03 PDA Manual Inspection Station/CONDITION UNKNOWN AS-IS. The Manufacturer's Description. Grohmann Eng. M03 PDA Manual Inspection Station Physical Description: =Unit includes 3 adjustable monitors(touch Screen) =Full on Keyboard with built in mouse. =X/Y Controller and Key Pad. =Trinocular MZ6 Leica Microscope W/two Leica 10445301 16x/14B Eyepieces and 4x optical Zoom. =Has 3 Cameras for Optical Inspection(Top.Side and Bottom)W/a Smart View Pro System. =Two Leuza Lumiflex Light curtains. =5 1/4 Inch Conveyor What We know: This unit was designed to inspect MEMS(Micro-Electro Mechanical System)Parts the size of a pin head and smaller. The basic price new prior to accessories and customer configurations was $200K What We DO NOT Know: The working condition and if it is complete. The unit appears to be in very good physical ... morecondition. We are offering this AS-IS. With no ROR. Asset# 110222. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You may return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
August Technologies XTool Inspection Series Model E20/B20 Edge Backside Station Description MAKE: August Technologies MODEL NUMBER: E20/B20 XTool Series Edge and Backside Inspection Station. CONDITION: This item was removed from the training department of a professional working environment. We are selling it in AS IS AS SHOWN condition with all of the components pictured included. Advanced Macro Inspection of edge and backside defects. Wafer inspection equipment for the semiconductor and PCB industry. AUCTION INCLUDES: Inspection station with components shown. Please simply contact us for an accurate freight shipping quote to your location. Only items pictured are included. If a part is not pictured or mentioned in the description then it is not included in the sale. If you are unsure about any aspect of this item please send an email and ... moreask questions before bidding. We do offer combined shipping discounts and free local pickup. Email for details. OceanTech WE BUY& SELL IT EQUIPMENT Guarantee 14 DAY RETURN POLICY: We want our Customers to be happy with their purchases. So customers are welcome to return items within the first 14 days of receiving the item if they are unhappy with the item. There will be a 20% restocking fee on any 2nd return from the same customer that are not due to a hardware failure within the first 14 days of receiving the item. There will be no restocking fee for items that break in transit or have a hardware failure in the first seven days the customer receives it. Buyer is responsible for return shipping charges unless there was a hardware failure We will not issue refunds for items we deemed tampered with or are dissembled by the customer. Our Customer Support We do our best to ensure that each and every transaction is free of problems and issues. If you have any questions or concerns we are here to help. Per eBay's policy and guidelines you must contact us before opening a case. We ask that you only open a case as a last resort and will do everything we can to prevent you from n
SONY INSPECTION STATION LENSES(Lot 0f 2) Very Good Condition All questions are welcome
0 0 1 142 813 North Texas Surplus 6 1 954 14.0 Normal 0 false false false EN-US JA X-NONE You are Buying a Wafer Inspection Station 0 0 1 12 73 North Texas Surplus 1 1 84 14.0 Normal 0 false false false EN-US JA X-NONE Used. Good Condition. Sold As Is. Wafer Inspection Station 2995 All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item The item comes with what you see in the pictures. If you don’t see it you probably won’t gel it. Feel free to email me your postal code. If this would ship to a commercial or residential address, and if there is a forklift/loading dock there, and/or if a lift gate would be necessary for a total shipping and handling ... morequote prior to bidding. The charge for freight will be determinate by the destination upon the ending of the auction. There will be a packing fee on larger and heavier items. It will be determined by the size and the care that has to go into packing an item. Thanks. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14477c01371-0xf0-
Click to Enlarge) Product ID# G107426 This Leitz M.I.S. 200 Ergoplan 8" Wafer Inspection Station appears to be in very good cosmetic condition. Although there are a few small dings, scratches, signs of previous use. Please look at the photos. The microscope eyepieces included are Leitz Periplan GW 10x/26 ∞ M. There are six Leitz microscope lenses included. The lenses are as follows; One ∞/ PL FLUOTAR 5x/0.12, One ∞/ PL FLUOTAR 10x/0.25D, One ∞/0 PL FLUOTAR 20x/0.45 D, One ∞/0 PL APO 50x/0.85 D, One ∞/0 PL FLUOTAR 100x/0.90 D, and One ∞/0 PL APO 150x/0.90 D. The unit powers-up, although the computer required a“Boot Disk” and we are currently searching for it. When powered-up the Microscope Stage moved X& Y to the reference points then it moved the wafer chuck to what appears to be the auto loading position. This is the only testing ... morethat has been performed. Since I am unable to formally test it or verify calibration, I am obligated to list this unit as“Not Working” The wafer cassette and the wafer shown on the chuck are for visual reference only and NOT INCLUDED. This unit requires 220VAC 1-phase input. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 60“L x 40“W x 56“H. This microscope has been sitting in a QC lab clean-room and rarely used since 2003. The original acquisition cost was $148.000. Due to the size of this unit. A custom made pallet or crate may be required to ship it. The cost of the pallet/crate(if required) will be paid for by the winning bidder. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of
Questions? Call us: 1-877-328-9236. Zeiss Axiotron 2 300mm Video Wafer Inspection Station +Isolation Table Seoul 12" Manufacturer: Seoul Engineering Model: SEC-2000AT Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Seoul Engineering Condition: Used. This scope is in Good cosmetic condition with just a few minor blemishes on surface finishes(mostly scratches/scuffs on the polished steel) We did not note any flaws in the optics. Except some"cleaning mark" type scratches in the top of the 5x lens. Which do not show up when viewing samples through the scope. The computer has been upgraded to a faster processor with more RAM, and operates significantly faster than it used to do. Notes: This lot is in Good working condition. The only notable problem we found is that the vibration isolation ... moretable has a couple of leaks in the airbags. But the table still lifts off and reduces the vibration that reaches the microscope platform. The microscope and motorized stages work great, and the view through the eyepieces is bright and clear. The view through the computer has a smaller field-of-view but it is larger onscreen and so easier to see samples than through the eyepieces. We were able to measure a very small feature on our test circuit(see photos) No other testing was done. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Seoul Engineering SEC-2000AT Inspection system, 20) Spare Philips 7724 lamps, 1) Pile of software installation discs including Windows and Imagescope 2.4, Specifications: Manufacturer: Seoul Engineering Co. Ltd. Model SEC-2000AT Inspection System, Inspection microscope with video measurement& photo capability, All linear axes. Objectives and lighting are remote-controlled, Semiconductor wafer capacity: up to 300mm, Microscope: motorized Zeiss Axiotron 2 Trinocular head with camera mount adapter, HAL 100 illuminator, Objective lenses: 44 23 24 Epiplan NEOFLUAR 5x/0.15 HD ∞/0, 44 29 44 Epiplan 20x/
KLA/Tencor 2606 Review Station 504085/W260611A for Mask and Wafer Inspection. Includes: Nikon Optiphot 66 Microscope with Bright/Dark Field Switching with Nikon Objective Lens BD Plan 10X 0.25 210/0. S/N: 340633 and Two Nikon CFUWN 10X/26.5 Eye Pieces. System is not functional and sold for parts only. L749) Directive for Customer Service Questions: During business days. We will make every effort to respond to your emails as soon as possible. If you have any questions about this item or other items in our list, please contact us prior to bidding. Over the weekend or holidays, the questions will be answered in the first opportunity afterward. Sold As-Is. Where-Is: Most of the items listed were used in one form or another in our laboratory for different research and development projects. And are now sold due to the termination of these projects. ... moreAt this stage we are not able to completely test and calibrate the items, therefore, all items are sold as-is. Where-is, without warranty or guarantee. Unless specified in the listing. All sales are final. Please ask all pertinent questions regarding the condition of the item before you make your purchase. As your selection may prohibit other customers from bidding. The operation of the items is the customer’s sole responsibility, and he/she must have the professional skills to safely operate them. We reserve the right to refuse a return based on customer not fully understanding the item description and the proper way of operation or changing his/her mind. DOA or Incorrect Product: All items described to be in operational condition but received Dead on Arrival(DOA) can be returned for replacement or refund(when no replacement is available) Only if we are notified within 7 days of receipt of product. Compensation will be provided upon actual return receipt, physical examination, testing, and serial verification of the item and all sent accessories. If any one of these criteria is not met, we reserve the right to withhold funds for an indefinite term until all requirem
Works well. Just need to remember it's a vintage type of system. It's on a stand. I can send more pics. Buttons all work, just need to push twice sometimes. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-147f54ea218-0x114-
Manufacturer: Master Lens Glass Lens: W 7 ¾ inches X H 6 inches Base: L 24 inches X W 18 inches X H 18 inches Weight: 30 Lbs not including packaging Condition: Mint condition Used-Tested- 30 Day Parts Only Warranty Any questions you can contact us at 248-765-9899 PAYMENT INFORMATION: We accepts Bank Wire(Transfer) PAYPAL, and cash in person. All items must be paid in full before they are shipped. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all foreign duties, custom broker fee and taxes are the responsibility of Buyer. Unless Buyer furnishes ANIMATRONICS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Buyer. The failure of ANIMATRONICS to invoice such ... moretaxes does not excuse the Buyer from responsibility for paying same. CUSTOMER SUPPORT Thank you for visiting our eBay Store. We are committed to offer high-quality and low-cost Electronic Equipment and Parts. Our primary mission is your satisfaction with our products and services. We try our best to ensure utmost customer satisfaction and make your eBay experience a great one. Have a question? Contact us via the Ebay Message Forum. 248-765-9899, or. Please Note: We are not responsible for shipping damage. We are purchasing Shipping Insurance on every shipment. The cost is included in your shipping. Buyers must inspect the merchandise for damage BEFORE accepting delivery for us to file a claim on your behalf. If there is visible damage. You must have the driver note the damage on the delivery receipt and sign it. Never accept damaged merchandise without making notations on the Delivery Receipt and having the driver sign the receipt. Return/Exchange Policy- 30 days money back or replacement warranty terms start from purchase date. You may find durations and special conditions in item description. Shipping/Handling/Insurance costs are not refundable. Returns/Exchanges will no
Nanometrics 7201-1267 Wafer Inspection/Measuring Station W/Newport Table SHIPPING NOTICE: This will need to be shipped by freight because of the size and weight. An additional $70.00 will be charged for a residential delivery. If lift gate delivery would also be an additional $70.00. Nanometrics 7201-1267 Wafer Inspection/Measuring Station W/Newport Table Used but in good condition. This station includes a Nanometrics 7201-1267 Rev. A Inspection System with a Mactronics PMR-600 Autoloader. I am not able to test the autoloader because I think it needs to be attached to a vacuum source. This station is set up on a Newport Vibration Isolation Table that measures 30" X 30" x 29" High. Also included is a Nanometrics 220NANO printer that I am not able to test. There is a small monochrome monitor also. This unit came with an older ... morenanometrics keyboard and computer tower that is missing some parts that does not appear to have been in use. The head of the microscope is labeled Nanoline 50-2C. Both of the computer components power on and the fans run. But that is as far as I can test them. I can power the microscope on and am able to view good clear images of a wafer(wafer not included) I took a couple of pictures through the eye pieces(pictures number 22 and 23) I am not able to get an image to show on the moniter. It looks like it is missing at least a couple of cables. I took a lot of pictures of this item and so please check them carefully. Due to the size and weight of this unit it will have to ship freight. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have
Title: Leica/ Leitz Ergoplan Wafer Inspection Microscope System + Confocal Module NICE Description: This auction is for one Leica/ Leitz Ergoplan Wafer Inspection Microscope System. Recently removed from a shut down hard drive manufacturing facility. I believe this was part of the MIS 200 automated inspection station. Overall this is in good to excellent cosmetic condition. It appears the only things missing are the light source for the Confocal Module. And the stage controller. Besides that, it comes complete with a full set of PL Fluotar objectives. Also included in the sale is a second Ergoplan microscope that is for parts only. No optics, and it missing other pieces. It would be good to use for spare parts for the nice system. Due to weight and size, this will ship via freight. Please email me for a shipping quote before bidding. I am ... moreselling this as-is, as described and pictured below. Please assume it will need to be gone through/ adjusted before any critical use. Check out my other listings for more nice microscopes! Take a GOOD look at the pictures and good luck bidding! Please ask any and all questions before bidding. And I will do my best to answer them. ALL ITEMS ARE SOLD AS-IS. UNLESS NOTED OTHERWISE ABOVE! PLEASE READ: I strive to provide an accurate description and complete disclosure of my selling practices. If the item does not meet your expectations please contact me prior to leaving feedback so that I may address any issues. I make every effort to ship within 3 BUSINESS days of receiving payment. My shipping costs are based on the shipping weight of the item. Insurance and the cost of packaging. Most items are shipped via FedEx ground for the price quoted above. All international shipments are by USPS Priority mail international. International bidders are responsible for all customs fees. If there is not a"buy it now" price listed on the item, it means I intend to let the auction run to completion so please do not ask me to end the auction early, that is unfair to other bidders. All my
CR Technology CRX 1000 X-Ray Inspection Station X-Tek Systems Open Tube. SR-2 X-Ray Controller 160kv 20w Windows XP RTI 580 Imaging Top notch analytical tool. Recently removed from the Lab. It is in need of minor repair. An expert on this equipment believes it needs either a new turbo pump or a new board. We have turned the tool on to inspect it. This is a good CRX 1000. We are selling this tool"as-is" We are not experts in this equipment. Please feel free to ask questions! Thank you- Joe 650 464 6355