|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$162.16 Shipping Condition: Used Location: Clare, United States Model: Unknown. Part Number: Unknown.
1d 12h 52m 52s 0 bids
$700.00 Now
Free Shipping Condition: Used Location: Portsmouth, United States Alignment tool used for checking machine ways when reconditioning. Round sled has three positions to use on v ways in an inverted or regular style. Third ... moreposition can be used on square ways. Fully adjustable. Indicator holder is for 8mm or 5/16” indicator stalk. Noga featured is NF1018. Allows fast accurate measurements to be taken. This alignment tool has been used to scrape in the lathe in the pictures. It is suitable for South Bend 9” to 16” and similar sized lathes. ****Does not include Noga indicator holder or Interapid indicator*****
Buy It Now
$102.80 Shipping Condition: Used Location: Morton, United States Large milling attachment for a metal lathe. Please look at the pictures for dimensions and see if this will fit or can be modified to fit your machine. ... moreNo jaws or handle are included. Attachment weighs approximately 60 lbs. If you need additional pictures or measurements please contact me and I will get back with you.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This looks to be in nice shape. I don’t exactly know what lathe this is from but it would be a larger one. I posted in on a facebook page for machinists ... moreand the consensus was for large Monarch with a few people saying South Bend. Please look at the photos to see if this would work on your machine. The distance between the holes is roughly 3.5” on the side of the casting. They are slotted in different directions so there’s some wiggle room there. If you know that lathe cross slide this fit’s please let me know.
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
Free Shipping Condition: Used Location: Sterling, United States 16" swing metal lathe steady rest. Steady rest is used with some grease/grime but in good usable condition. Bottom clamp looks to have been brazed before. ... moreTop of rest appears to also have been repaired at one time but seems to be very structurally sound. Fingers move in and out as they should. Dimensions in photos. Please reference them to see if it can fit or be modified to fit your machine. Ships free to continental USA. Buyers outside continental USA please message prior to purchase for shipping quote.
Buy It Now
Free Shipping Condition: Used Location: Sterling, United States Could easily be modified to fit a number of sizes or machines.
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$5.95 Shipping Condition: New Location: Ionia, United States 3D printed 2-1/4 x 8 tpi spindle nose guard, Protects your spindle thread when working on lathe. These 3D printed spindle protectors are amazingly strong.
Buy It Now
Free Shipping Condition: Used Location: Scranton, United States Armstrong 603-A 5/8 lathe wrench.
Buy It Now
$8.70 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States 3D printed 2-1/4 x 6 tpi spindle nose guard, Protects your spindle thread when working on lathe. These 3D printed spindle protectors are amazingly strong.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States The OD is 6.225 … however my micrometer is vert old and have no way to check the accuracy. 16 DP was the closest I could find.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: BXA Size 250-222 Wedge Type Tool Post Tool Holders Set for Swing Dia 10 - 15" Suitable for lathe center height 0.7-2.2" (top compound surface ... moreto lathe center line). Interchangeable with Aloris, Dorian , Yuasa & Phase II. Brand new. Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of： 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits to1/2".
Buy It Now
$15.50 Shipping Condition: Used Location: Granger, United States Antique Lathe. Change Gear Set. This set consists of the following six gears.
Buy It Now
$1.25 Shipping Condition: New Location: Canada All our stickers are outdoor durable! It is your responsibility to ensure this information is correct. PERFECT FOR THE MILLWRIGHT !!
Buy It Now
$32.20 Shipping Condition: Used Location: Eldred, United States No mounting plate. will need cleaned up before use.
Buy It Now
$5.95 Shipping Condition: New Location: Ionia, United States 3D printed 2-3/8 x 6 tpi spindle nose guard, Protects your spindle thread when working on lathe. These 3D printed spindle protectors are amazingly strong.
Buy It Now
$24.50 Shipping Condition: New Location: Berrien Springs, United States
Buy It Now
$33.65 Shipping Condition: Used Location: Granger, United States Large Antique Lathe. This set consists of the eighteen following gears. Two 28t (one tooth chipped), Two 30t, Three 32t, 34t, Two 38t (one chipped tooth), ... moreThree 40t, 48t, 58t, Three 60t. Change Gear Set.
Buy It Now
$8.45 Shipping Condition: Used Location: Granger, United States Antique Lathe. Change Gear.1875 keyway.
Buy It Now
$4.00 Shipping Condition: Used Location: Olmsted Falls, United States You are buying (1) Armstrong 603-A 5/8 lathe wrench. Armstrong 603-A 5/8 lathe wrench.
Buy It Now
$15.50 Shipping Condition: Used Location: Granger, United States Large Antique Lathe. Dirty but still very useable. Change Gear Set.
Buy It Now
$8.45 Shipping Condition: Used Location: Granger, United States Antique Lathe.9375 Hole. Change Gear.
Buy It Now
$8.45 Shipping Condition: Used Location: Granger, United States Large Antique Lathe.9375 Hole. Change Gear.
Buy It Now
$15.50 Shipping Condition: Used Location: Granger, United States Large Antique Lathe. Dirty but still. Change Gear Set. 1.125 Hole.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Description： This Wedge type tool post is precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims All working parts hardened and precision ground Package List:.
Buy It Now
$8.45 Shipping Condition: Used Location: Granger, United States Large Antique Lathe. 1.375 Hole. Change Gear.
Buy It Now
$8.45 Shipping Condition: Used Location: Granger, United States Antique Lathe.9375 Hole. Change Gear.
Buy It Now
$21.90 Shipping Condition: Used Location: Granger, United States Large Antique Lathe. This set consists of the twelve following gears. Two 30t, 35t, 40t, 60t, 70t, 80t, 90t, 105t, 110t, 120t,130t. Nice clean set with ... moreno broken teeth. Change Gear Set.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$75.00 Shipping Condition: Used Location: Huntington, United States All of the guides move freely, and all of the locking screws move. The only piece not original is the bed nut. -excellent shape, very clean. This is a ... moreheavy piece at 50lbs.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States It still has the shipping grease on it. The sleeve is not included. Thank you for considering to support our family and small business. Words cannot express ... morehow grateful we are for your business no matter how big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
$91.84 Shipping Condition: Used Location: Troy, United States Not sure what lathe it's for. Looks like South Bend or Monarch????.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta ... more14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Product Description： This Wedge type tool post is precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta ... more14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Feature： Wedge type tool post are precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims All working parts hardened and precision ground Package Including：.
Buy It Now
$6.00 Shipping Condition: New Location: North Tonawanda, United States HSS Tool Blank Fagersta WKE 4 Sweden South Bend Clausing Monarch NOS.
Buy It Now
$6.80 Shipping Condition: New Location: North Tonawanda, United States HSS Tool Blank Fagersta WKE 4 Sweden South Bend Clausing Monarch NOS.
Buy It Now
$6.00 Shipping Condition: New Location: North Tonawanda, United States HSS Tool Blank Fagersta WKE 4 Sweden South Bend Clausing Monarch NOS.
Buy It Now
$6.80 Shipping Condition: New Location: North Tonawanda, United States HSS Tool Blank Fagersta WKE 4 Sweden South Bend Clausing Monarch NOS.
Buy It Now
$9.00 Shipping Condition: Used Location: North Tonawanda, United States Dorian CA MT3 Morse Taper 3 tool Holder Clausing Monarch South Bend Read ⬇️😎. Chuck and bit used for reference. Not included.. however if you need any ... moreMT3 Drill bits let me know and I’ll give you a bundle deal
Buy It Now
$29.95 Shipping Condition: Used Location: New Berlin, United States This is USA made and is in great condition. This is for 8"-12" swing lathes. These are no longer made and are becoming hard to find. This is ready to ... moreuse!
Buy It Now
$6.80 Shipping Condition: New Location: North Tonawanda, United States HSS Tool Blank Fagersta WKE 4 Sweden South Bend Clausing Monarch NOS.
Buy It Now
$10.60 Shipping Condition: New – Open box Location: Houston, United States
Buy It Now
$18.60 Shipping Condition: Used Location: New Hyde Park, United States Large Lathe Lantern Tool Post Holder South Bend Leblond Regal Monarch Hendey. Condition is Used. Shipped with USPS Ground Advantage. Nut on the bottom ... moreis slightly loose.
Buy It Now
$4.00 Shipping Condition: Used Location: Diamond Point, United States Includes photos and a bit of info on the Atlas F Series, South Bend Tool Room Bench lathe, Sheldon 12" U-type, LeBlond 13" Super Regal, Monarch model ... moreW, Warner and Swasey 2-A Universal. Grandpa's Secrets.
Buy It Now
$12.00 Shipping Condition: New Location: Schaumburg, United States Whole set includes one each of: (Total 6PC ). All working parts hardened and precision ground. 250-202 Boring,Turning Tool Holder, use tool bit up to ... more5/8" and round shank tool bits up to 1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
Buy It Now
$13.00 Shipping Condition: Used Location: Rochester, United States Southbend Lathe Leblond Monarch HSS 1 1/8 Diameter Dreamer 2 Pc LotHSS dreamer drills 1.199 then teams 1.125 inchOne operation#3MT Shank
Buy It Now
$18.00 Shipping Condition: New Location: Schaumburg, United States All working parts hardened and precision ground. 250-201 Turning & Facing Tool Holders, use tool bits up to 5/8". 250- 204 Heavy Duty Boring Bar Holder, ... morecan use 3/4" and 1" two size shank boring bars.
Buy It Now
$64.27 Shipping Condition: Used Location: Dayton, United States LATHE STEADY REST FOR SOUTHBEND ?. & OTHER LATHES CNC MILLING TOOLING. Manufacturer: M & J TOOLING LLC. SOLD BY M & J TOOLING LLC. M & J TOOLING LLC. ... moreITEM TITLE. PRODUCT SPECIFICATIONS AND / OR LABELING.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States SOLD BY M & J TOOLING LLC. LOCATION: WB14-2-3-1. / LABELING.
Buy It Now
Free Shipping Condition: New Location: Chino, United States BXA Size 250-222 Wedge Type Tool Post Tool Holders Set for Swing Dia 10 - 15" Suitable for lathe center height 0.7-2.2" (top compound surface to lathe ... morecenter line) Interchangeable with Aloris, Dorian , Yuasa & Phase II Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. .
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States THE BLACK RING SPINS BECAUSE THERE IS A BEARING IN THIS. I THINK THIS IS USED TO FACE SUPPORT A WORK PIECE ON A LATHE THAT CANNOT HAVE A CENTER IN IT. ... moreI AM GUESSING AS TO WHAT THIS IS FROM EXPERIENCE.
Buy It Now
Free Shipping Condition: New Location: Mcminnville, United States Classic Archives Listing Please visit our page for more information about us and our products! Vintage Lathe Manual Library Included: Over 350 TOTAL PUBLICATIONS. ... moreIncluded: Manuals. Bulletins, Parts Lists, Circulars. Included: 43 Total Manufacturers Represented. Selected and organized by the engineering department at ADV Plans. LLC. We encourage you to comparison shop and save with us. Neatly organized parts list and instruction manuals. By manufacturer model type. Note: This collection does not include our South Bend Lathe Instruction Manuals. We have devoted a separate DVD just for those. If you have a South Bend Lathe. Look at our other listing for the disk for you: Interesting in learning how to run a lathe? Take a peek at our Lathe Instruction DVD: Don't be fooled by inferior collections. Our collection remains the largest and most complete collection available on one DVD online! All books are in PDF format. For easy searching and printing If you have an old lathe. And you want to find some literature on it, you've come to the right place. This remains the largest collection on one DVD. Included are 358 vintage lathe manuals. Guides, bulletins, brochures, circulars, and parts list. Neatly organized on one DVD to make it easy to find and read. No need to buy multiple DVD's from inferior sellers and higher cost, this will complete your collection. Every manual you see listed here is included on this fully packed DVD: American Machine and Tool 1973 American Machine and Tool Model 273 Lathe Instructions and Parts List. 2 pages American Machine and Tool Model 4370 Cast Iron Wood Lathe. 10 pages American Tool Works 1912 American High Duty Lathe Brochure. 4 pages 1912 American Tool Works General Line Catalog. 59 pages 1912 American Tool Works High Duty Lathe Circular. 8 pages 1913 American Tool Works 18 inch High Duty Lathe Bulletin. 4 pages 1915 American Tool Works Efficiency Bulletin. 40 pages 1919 American Tool Works 36 inch High Duty Lathe Brochure. 4 pages 1920 American Tool Works High Duty Lathes
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta ... more14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Feature： Wedge type tool post are precision engineered to assure repetitive accuracy Wedge type tool posts Have the Maximum ridigity to get the chatter free performance No time wasted with shims All working parts hardened and precision ground Package Including：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" ... moreEmco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits up to1/2" 250-204 Heavy Duty Boring Bar Holder, can use both 3/4 and 1" shank boring bars.
|
|
|
|
Quantity of four 5-C Lathe Collet fixtures for Monarch,South Bend, Hardinge,Jet
No Reserve Auction here for a quantity of Four 5-C Lathe Collet Fixtures Lightly rusted from years of storage. Will easily polish up with Scotch Brite& WD40 Use as is or modify for your own application. Look closely at pictures. One with horseshoe washer is 1.000 dia.O.D. O ne wth collet stop is 1.016 dia. I.D. Flat Rate shipping anywhere in the USA is $5.50(please check my other auctions) Pay with PayPal No Returns
|
|
|
Armstong Williams Lathe Dogs South Bend Logan Clausing Monarch American
Armstrong 2" JH Williams 1-3/4" Armstrong 1-1/2" JH Williams 1" No Name but made in the USA 3/4" Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
ENCO LATHE TOOL POST SOUTH BEND LOGAN HARDINGE MONARCH CLAUSING ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Enco Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 4 1/2" Square. 1 1/4" Max Bit. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
LATHE MICROMETER BED CLAMP SADDLE STOP - LOGAN CLAUSING SOUTH BEND MONARCH
This is a lathe bed-clamp carriage stop/micrometer(etc) holder for a lathe(no bed clamp included) It has a good movement. I'm not sure what lathe it came from but it looks like good quality and I think it might be from a 5900 series Clausing lathe. But I'm not sure. The dimensions are shown in the pictures. Please see pictures for exactly what's included. Don't miss this as it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your ... moreitem in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items) Rcmd
|
|
|
LARGE LATHE TOOL POST & WRENCH LOGAN SOUTH BEND HARDINGE CLAUSING MONARCH ETC
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1 11/16" x 1 15/16" Bottom Square. 11/16" x 2 1/2" Opening. 1 11/64" Body Dia. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker.
|
|
|
Buck 8" 4 Jaw Chuck D1-3 Camlock Spindle Monarch 10 EE Emco South Bend Lathe
You are looking at a Cushman 8" 4-Jaw Chuck. D1-3 Camlock Spindle. Originally, this chuck is from a Monarch 10 EE lathe. This chuck is in good condition, jaws are also in good condition. Jaws turn smoothly. The weight of the chuck 34 lb and 9 oz(15.670 kg) No key. The jaws turn smoothly. But the chuck is old and it may need to be taken apart, cleaned, regreased, etc. I made 16 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will ... morereturn the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking.
|
|
|
LATHE 5C COLLET DRAWBAR (FROM 11" ROCKWELL) - LOGAN SOUTH BEND MONARCH ATLAS
This is a lathe 5C drawbar. It is just the drawbar part(no nose adptor. Etc) This was being used on an 11" Rockwell lathe when I got it. It is a quality made tool and could probably be adapted to fit many different lathes. It's in good shape with no significant damage aside from some staining. The dimensions are shown in the pics. Please see pictures to see exactly what is included. Don't miss it! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! ... moreSee my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
Armstrong 5/16' Tool Bit Holders South Bend Monarch Sheldon Logan Hendy
This is a used pair of Armstrong tool bit holders for holding 5/16" square tool bits. The straight one has a shank 1/2" x 1.150" and is 6" overall long. The left hand tool has had the shank ground down to 3/8" x 1" and is 6 1/8" overall long. The screw heads are 7/16" square. They are in good useable condtion. See my other rocker type tools currently listed. Thanks for looking.
|
|
|
Elk Tools Rocker Type Universal Tool Bit Holder Sheldon South Bend Monarch Hendy
This is a used rocker type tool bit holder made by Elk Tools. It is universal in that you can turn it upside down for opposite hand turning. the tool slot will hold up to a 3/8" tool bit. The shank is 1/2" x 1 1/16" The overall length is 6 1/4" The tool is in good condtion. See my other rocker type tools currently listed. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-140a5b1fdc9-0xf9-
|
|
|
WILLIAMS 1-L 1-R TOOL HOLDERS for South Bend Logan Monarch lathe
This listing is for a pair of Williams tool holders 1-L and 1-R. They measure 1 1/8" X 1/2" and hold 5/16" bits. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-140edaf34e3-0xee-
|
|
|
LATHE BORING TOOL HOLDER LOGAN SOUTH BEND HARDINGE MONARCH ATLAS CLAUSING
LATHE BORING TOOL HOLDER LOGAN SOUTH BEND HARDINGE MONARCH ATLAS CLAUSING Brand Unknown Packaging None Condition Very Good Quantity 1 Looks like someone painted it grey. End to center of hole is 2 1/4" Bottom Square Missing. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Atlas Craftsman Lathe Jacobs #2 MT Drill Chuck Clausing Monarch South Bend Logan
Welcome All* Up for auction today is a#2 morse taper drill chuck for a lathe. It was made by Rohm in West Germany. It has a 1/64"1/4" capacity. If you win multiple items. I will combine shipping, and send a revised invoice after auctions are over. If you think the shipping price is too high, please email me for a shipping quote. Ebay has really changed their system, and forces us to put in weights, and sometimes the shipping prices that show up on the page are too high. There will be a $.65 fee for delivery confirmation, so when the auction is over, please wait for an invoice. Thanks for looking*
|
|
|
LANTERN TOOL POST for large South Bend Logan Monarch lathe
This listing is for a lathe lantern tool post. It is in great shape. It is 3" tall and 1 1/4" in dia. The ring at the bottom is 1.575" The square base is 2" square and 1/4" thick. It holds a 5/8" tool. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Triple Bearing Live Center for Lathe, South Bend, Monarch, Clausing
Excellent Triple Bearing Import Live Center for Lathe MT4 Shank. 1/2" x 13 TPI draw threads, good point, smooth bearings. No international shipping. I try to describe as accurately as possible. Ask questions prior to bidding. Happy to combine shipping when possible.
|
|
|
MT4 TO MT4 EXTENSION SLEEVE LATHE SOUTH BEND LOGAN HARDINGE MONARCH CLAUSING
MT4 TO MT4 EXTENSION SLEEVE LATHE SOUTH BEND LOGAN HARDINGE MONARCH CLAUSING Brand Midwest Detroit Packaging None Condition Very Good Quantity 1 Has name etched on it. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Lathe Micrometer Carriage Stop for 10 inch LATHE South Bend Atlas Monarch L@@K !
This is a MICROMETER STOP for a 10 inch LATHE that fits SOUTH BEND. ATLAS, and MONARCH and others. It fits V-WAYS not FLAT WAYS. It is in GREAT USED CONDITION. Any questions please ask me.
|
|
|
Armstrong No. 3-S Lathe Tool Holder South Bend - Logan - Sheldon - Monarch
For your consideration: 1 Armstrong No.3-S lathe tool bit holder. This tool holder is for a larger type lathe. 8" in length 3/4" wide 1-5/8" high. It can hold a tool bit up to 1/2" The square 9/16" locking screw moves easily and is in very good condition. This top surface is not smashed or splayed out from being over tightened. Both sides at the rear have some previous owner I.D. grind marks. see pictures) Thank you for looking.
|
|
|
WILLIAMS #N-22-R CUT-OFF LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING
WILLIAMS#N-22-R CUT-OFF LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING Brand Williams Packaging None Condition Excellent Quantity 1 5/8" x 1 3/8" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-145342a9414-0x115-
|
|
|
TOYO SUZUKI LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING
TOYO SUZUKI LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING Brand Toyo Suzuki Packaging None Condition Excellent Quantity 1 7/16" x 15/16" 1/4" bit. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-145342a9407-0x10d-
|
|
|
WILLIAMS #N-31-L CUT-OFF LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING
WILLIAMS#N-31-L CUT-OFF LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING Brand Williams Packaging None Condition Excellent Quantity 1 1/2" x 1 3/16" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-145342a944e-0x105-
|
|
|
WILLIAMS # 1-L & 1-S LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING
WILLIAMS# 1-L& 1-S LATHE TOOL HOLDER LOGAN SOUTH BEND MONARCH CLAUSING Brand Williams Packaging None Condition Very Good Quantity 1 9/16" x 1 1/8" 5/16" Bit. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
8" Pratt 3 Jaw Chuck With Tapered Spindle Mount,south Bend Lathe,monarch Lathe
8" 3 jaw chuck made in England. Inside and outside jaws and chuck key. Has tapered spindle mount.I don't know much about tapered spindles but I can give thread dimensions. Threads are 3-3/4"6.im in nh,shipping quote is for the west coast. If your closer it will be cheaper.my pratt chuck has the same BP number so this is a Pratt Posted with
|
|
|
Lot of 2 change gears,lathe,mill,atlas,craftsman,logan,south bend, monarch
Lot of 2 change gears: one is 48 tooth. 3/16" keyway and 1" bore outside diameter is about 4-1/8" thickness is 3/4" second is 54 tooth, 1/4" keyway and 1" bore outside diameter is about 4-5/8" thickness is 3/4" used. Working condition, see pics. Normal 0 MicrosoftInternetExplorer4 General terms and conditions below. See detailed auction listing above for specifics which take priority over the general terms: Please check out my other listings for more stuff. You never know what it will be. Varies quite a bit. IMPORTANT: I am wiling to combine shipping on multiple auctions ending in the same week if it can reasonably be done on my end of it. BUT to get this you must follow these steps: 1. Wait to pay until all the auctions you are bidding on are over. 2. Please request an invoice. Either through the listing ... moreor through eBay’s email system. 3. Pay the combined total of the invoice ONE TIME only. If you don’t request an invoice it becomes next to impossible to offer you. The valued customer, a combined shipping discount. I want to be able to save you as much $$$ as possible on shipping in this rough time we are living in BECAUSE I WANT AND VALUE YOUR BUSINESS. Additional note on shipping: Apparently it is the NEW GOUGE/RIPOFF. UPS is still charging a fuel surcharge. There is nothing I can do about that except try to work with you on alternative shipping: I will quote you a parcel post rate from the post office IF(and this is a big IF) it fits parcel post limitations of size and weight. And IF you are willing to wait the extra time in shipment for the lower cost. Please email me your shipping address for an accurate quote BEFORE the auction ends and before you bid on anything. Also. Sometimes the parcel post thing will work for combined shipping and sometimes it won’t. Depends. Additional additional note on shipping: ebay now charges 9% on the shipping costs also. I do not like this and you do not like it either. I have no choice but to mark up the shipping costs by an additional
|
|
|
Armstrong tool holder for south bend logan atlas monarch hendey metal lathe
Armstrong R.H. lathe tool holder 1/2 x 1 1/2" shank. Has two unused cutting bits and unused wrenches. Is stil unused in box. Box is in rough shape. So didn't take photo of it. I think the straight cutting bit holder is shop made, but looks to be in excellent quality.
|
|
|
carboloy carbide bit holders for south bend logan monarch metal lathe
Good condition carbide tool holders. Carboloy Systems. These have 1" x 1" square and 3/4" x 1" shanks.
|
|
|
Williams No. 31-L Lathe Cut-Off Tool Holder w/ Blade Logan South Bend Monarch
Armstrong No. 571 Cut-Off Tool Holder w/ Blade Very nice used cut-off holder with blade. For 3/4" blades Shank measures 4" x 1 3/16" x 1/2"
|
|
|
STEADY REST - ENGINE LATHE SOUTH BEND MONARCH ATLAS CRAFTSMEN
STEADY REST Please Look at Pictures for size Shipping is Only $25 Anywhere in USA This Steady Rest. Is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection We are Open to Offers Though Out The Auction Please check out our other forklifts. Machinery, and accessorizes on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: Wire Transfer. Or Certified Bank Check, Paypal
|
|
|
LARGE 2 1/16" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH
LARGE 2 1/16" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH Brand Unknown USA Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
LARGE 1 3/8" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH
LARGE 1 3/8" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH Brand Unknown USA Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
South Bend,Monarch? Telescopic Lathe Steady Rest Tool 12" 6 1/4"Center V
South Bend. Monarch? Telescopic Lathe Steady Rest Tool 12" measures 6 1/4" between center of V's Center 7" wide at bottom. Please check measurement to see if it works for your Lathe. In very good condition.
|
|
|
3 INDEXABLE CARBIDE INSERT BORING BAR LOT SOUTH BEND LOGAN LEBLOND MONARCH LATHE
3 Indexable Carbide Boring Bars. Kennametal, Ultradex, Circle Machine.used Details: 3 Boring Bars total in lot Kennametal Boring Bar: 1" diameter. 8" + in length S16 SCLPR Circle Machine Boring Bar: 3/4" diameter. 8" Length B-750-8s Ultradex Boring Bar: 5/8" diameter. 7" Length A10Q SCLCL3 FOREIGN BUYERS ASK FOR SHIPPING QUOTE A little about Us: Machine Shack. Is a new company dedicated to finding and delivering High Quality Machines and Tooling. Although this User ID is new we have been selling for years on eBay. Always with positive feedback. Rest assured that our commitment to your satisfaction is our number one priority We take pride in offering quality products. We spare no expense in making sure that your item is packaged like one of us just bought it. NOTHING is worse than buying something from someone ... moreon eBay who does not care We Care and We look forward to doing business with you soon! Thanks! PLEASE SEE OUR OTHER AUCTIONS FOR MORE! Illinois residents please be advised that we must add sales tax of 9 percent to you winning bid total
|
|
|
Monarch, South Bend, Pratt Whitney Dual Inverted V Ways Steady Rest 4" thru hole
Recieved this in a lot of tooling. Includes williams adjustment wrench. sure what lathe it belongs to but it looks to be a dual V monarch or south bend. Measures 4" across the though hole and 7 and a half inches from center v to center v. Measures 7" from bed straight up to center of through hole. Please let me know if you need more measurements.
|
|
|
Used large Collet closer Draw bar lathe tool Unknown south bend Monarch who isit
for auction this used Collet closing draw bar. Overall length is 13 1/2' long outside edge to outside edge. The the back of the turn handle it is 12 3/4' long. From the shoulder of the handle to the threaded end it is 11 15/16' long. Then it has an adapter collar. With the adapter collar in place. The measurement is 10 3/4' long measuring from the top of the bevel. The outside diameter of the bar is 1 3/8' I believe the inside diameter is 1 3/16' It is really well made. But it has no marks that I can see. I purchased it at a recent estate where this was the only remnant that there was ever a late at the house. Please see pictures for condition. ask questions, any information will be appreciated. Buyer pays shipping and delivery confirmation usps parcel post mail. thanks for looking.
|
|
|
4 POSITION LATHE TOOL POST HARDINGE MONARCH SOUTH BEND LOGAN ETC.
4 POSITION LATHE TOOL POST HARDINGE MONARCH SOUTH BEND LOGAN ETC. Brand Shop Made Packaging None Condition Very Good Quantity 1 3 1/2" Squared. 5/8" Max Bit. 3" x 2 3/16" Bottom Square. Could be adapted to fit most lathes. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1481438228a-0x111-
|
|
|
angle test fixture,south bend lathe,bridgeport milling machine,monarch lathe
Interesting and well made fixture. Possibly for checking angles. If anyone knows what this is for please let me know
|
|
|
LARGE 2 13/128" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH
LARGE 2 13/128" MANDREL LATHE ATLAS CLAUSING HARDINGE LOGAN SOUTH BEND MONARCH Brand P& W USA Packaging None Condition Excellent Quantity 1 Its stamped 2 3/16" but measures 2 13/128" up and down it. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
CLARK #P60L LATHE CARBIDE TOOL HOLDER LOGAN SOUTH BEND HARDINGE MONARCH ETC.
CLARK#P60R LATHE CARBIDE TOOL HOLDER LOGAN SOUTH BEND HARDINGE MONARCH ETC. 834)
|
|
|
LATHE GRINDER 7 MANDRELS LOGAN SOUTH BEND HARDINGE MONARCH CLAUSING ETC. #001
LATHE GRINDER 7 MANDRELS LOGAN SOUTH BEND HARDINGE MONARCH CLAUSING ETC. 001 Brand Various USA Packaging None Condition Very Good Quantity 1 2 1/8" 1 7/8" 1 5/8" 1 9/16" 1 7/16" 1 1/4" 15/16" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Really nice Monarch 10ee, South Bend 13" lathe steady rest
You are bidding on a really nice steady rest that I thought was for a Monarch 10EE lathe. It has come to my attention that this may be a South Bend steady rest. It is similar in size to the 10EE steady rest that I had. So I would think it would fit a 13" South Bend. As you can see in the pictures, it is in excellent condition. See my other items for more 10EE tooling including the extremely rare follow rest. I am always happy to combine shipping. This is a no reserve auction.
|
|
|
5C COLLET LATHE CENTER SOUTH BEND HARDINGE LOGAN MONARCH TOOL AND CUTTER GRINDER
5c center in very good condition. Could be used in your lathe or tool grinder. Ships USPS priority mail in a small flat rate box. Please ask any questions before bidding. Please see my feedback and bid with confidence. We can combine shipping on multiple items purchased. Be sure to check out my other auctions. Thank you.
|
|
|
Heavy Tool Block Post Metal Lathe South Bend Logan Atlas Monarch Warner Swaysey
23 Pounds Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
ATLAS,CLAUSING, MONARCH, LOGAN SOUTH BEND LATHE TOOL POST ROCKER 1/2"x3 3/4"
1/2" x 3 3/4" tool post rocker. Does have a light scribe on both side's that reads"Lathe# lll" Has a few dings(look at pics) Good useable condition. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
|
|
|
South Bend Lathe 9" Diameter 4 Jaw Chuck Clausing Nardini Monarch
Up for auction today is a very nice condition 9" diameter 4 jaw chuck for a lathe. It is a South Bend chuck made by Skinner Chuck Co. It is a part number 4209-48. It has the D1-4 camlock backplate. The jaws move independently and are reversable. Comes with chuck key. If you win multiple items. I will combine shipping, and send a revised invoice after auctions are over. If you think the shipping price is too high, please email me for a shipping quote. Ebay has really changed their system, and forces us to put in weights, and sometimes the shipping prices that show up on the page are too high. Thanks for looking*
|
|
|
WILLIAMS #A-2-S LATHE TOOL HOLDER MONARCH LOGAN SOUTH BEND HARDINGE CLAUSING ETC
WILLIAMS#A-2-S LATHE TOOL HOLDER MONARCH LOGAN SOUTH BEND HARDINGE CLAUSING ETC Brand Williams Packaging None Condition Good Quantity 1 1 5/16" x 5/8" Shank. 3/8" Bit. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14be84de7e4-0x10d-
|
|
|
8" Face Plate 2 1/4" x 8 TPI Threads South Bend Monarch Metal Lathe Faceplate
8" Face Plate 2 1/4" x 8 TPI Threads South Bend Monarch Metal Lathe Faceplate 2 1/4" by 8 TPI. The face plate is in fine condition with some wear. The threads are in fine condition. It is off a Monarch metal lathe. It also fits on some South Bend and other lathes that use 2 1/4" x 8 threads. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $6.50 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. On Jul-22-14 at 08:36:11 PDT. Seller added the following information:
|
|
 |