|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States The AUTOBOX Technical Support team are also U.S.-based. Autobox LLC. It provides both longitudinal and cross auto feed in both directions (left/righ, ... moreforward/backward). Ratchet handles for operational convenience.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States The AUTOBOX Technical Support team are also U.S.-based. Autobox LLC. It provides both longitudinal and cross auto feed in both directions (left/righ, ... moreforward/backward). Ratchet handles for operational convenience.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States It provides both longitudinal and cross auto feed in both directions (left/righ, forward/backward). The AUTOBOX Technical Support team are also U.S.-based. ... moreRatchet handles for operational convenience.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States The AUTOBOX Technical Support team are also U.S.-based. Autobox LLC. Also add another Lead screw support bearing on its left end to avoid compression ... moreload thus reduces the vibration when engaging auto-feed or threading.
Buy It Now
Condition: Used Location: Eldred, United States
Buy It Now
Condition: Used Location: Ridgeland, United States Weiler Condor 81 lathe, made in Germany. Serial no. 32027. Spindle is A2-5 standard. Beautiful machine.all axis motions tight but smooth as silk. weight ... moreof the machine ca. 800 kg. turning speed range 30 - 2800 U/min.
Buy It Now
Free Shipping Condition: New Location: Pittsburgh, United States INCLUDES 2 AXIS DRO INSTALLED. Large 1-1/2″ Spindle Bore. POWER CROSS FEED, BOTH IN, OUT, and LEFT and RIGHT, and WILL CUT. Main Specifications of model ... morePM-1130V Lathe Power Cross Feed, In, Out, Left, and Right Feed.
Buy It Now
$18.40 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$4.85 Shipping Condition: Used Location: Nashville, United States
Buy It Now
Free Shipping Condition: New Location: Norcross, United States Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. Width of lathe bed: 3.94"(100mm). RC-210E lathe ... more1 Base oil pan 1 English manual 1. Spindle taper: MT5.
Buy It Now
Free Shipping Condition: New Location: Pittsburgh, United States INCLUDES 2 AXIS DRO INSTALLED. Main Specifications of model PM-1130V Lathe POWER CROSS FEED as well as feed on the carriage – Both in, out, left, and ... moreright. Large 1″ Spindle Bore, larger than most in this size range.
Buy It Now
Free Shipping Condition: New Location: Coraopolis, United States • Rigid Cast Iron Construction, for deeper cuts, and more vibration dampening. PRECISION MATTHEWS. • Precision Tapered Roller Bearings used in spindle, ... morefor the ultimate in long life, high precision, and best surface finishes.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR 300MM Linear Scale For Milling Lathe Machine Accuracy Grinding Linear. VEVOR 200MM Linear Scale For Milling Lathe Machine Accuracy ... moreGrinding Linear. Cast iron construction makes wood lathes durable, providing increased stability and smooth operation.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States It provides both longitudinal and cross auto feed in both directions (left/righ, forward/backward). The AUTOBOX Technical Support team are also U.S.-based. ... moreRatchet handles for operational convenience.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States The AUTOBOX Technical Support team are also U.S.-based. Autobox LLC. Spindle nose taper: MT#3. Carriage travel: 11.6" (295mm). Swing over bed: 8". Swing ... moreover cross slide: 4.3" (110mm). Lead screw support bearing on both ends (add one on left end) reduce vibrations, provide better cutting result, when using auto feed.
Buy It Now
Free Shipping Condition: New Location: China Cross Slide Travel: 3" / 75 mm. Cross Slide Travel: 2.6" / 65 mm. Slide Travel: 2.2" / 55 mm. 1 x Center Rest. I hope you can understand and accept our ... moreapproach. Why Choose VEVOR?. Range of Spindle Speeds: 0-1250 / 100-2250 RPM.
Buy It Now
$5.40 Shipping Condition: Used Location: North Tonawanda, United States Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…. - Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
Buy It Now
Free Shipping Condition: New Location: Coraopolis, United States Installed 3 Axis DRO. • Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and. carriage stop for repetitive ... morework. • Rigid Cast Iron Construction, for deeper cuts, and more vibration dampening.
Buy It Now
Free Shipping Condition: New Location: Livonia, United States This gear was removed from a new Enco 411-0106 lathe because it was not needed. 26 Tooth, 1.25 Mod, 20° PA ,OD 34.8 mm. Gear Data.
Buy It Now
$7.00 Shipping Condition: Used Location: Salt Lake City, United States
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Photo 2: Demonstrate s part installed on Atlas / Craftsman apron fitting with factory parts perfectly. You are getting ONLY the Gray miter gear the lead ... morescrew passes through (and the retaining collar).
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. choose it you will not regret! Width of lathe ... morebed: 3.94"(100mm). Spindle taper: MT5. Swing Over Bed: 8.27"(210mm).
Buy It Now
$6.00 Shipping Condition: Used Location: North Tonawanda, United States Rockwell Metal Lathe
Buy It Now
Free Shipping Condition: New Location: Pell Lake, United States I'm selling replacement plug screws that fit the oil lubrication hole located on the saddle of the 9" and 10l lathes. You will receive 2 per order.
Buy It Now
$5.45 Shipping Condition: New Location: Merrimack, United States This part is 3D printed of tough NYLON for reasonable life on these light lathes. Pick up a few to have on hand when it eventually gets loose. The parts ... moreare quality 3D prints on a top of the line modern printer of quality materials in either white/black/grey NYLON.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Power: 1100W(1.5HP). Gearless Design New gearless design! Lower noise, no longer need to change gears to adjust the processing thread, only need to operate ... moreon the panel, processing efficiency greatly improved!
Buy It Now
$10.34 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Lathe Cross Feed Assembly Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$16.89 Shipping Condition: Used Location: Ottawa, United States This is from a Clausing Model 5310 Lathe.
Buy It Now
Free Shipping Condition: New Location: China Made of high Quality Spring Steel. Clamping range: 2-46MM.
Buy It Now
$41.95 Shipping Condition: Used Location: Barnegat, United States Excellent condition original paint nice half nut assembly Atlas Craftsman Dunlop 6" Metal Lathe Complete Cross Feed Compound Slide Asmbly. Condition is ... moreUsed. Shipped with USPS First Class Package.
Buy It Now
$6.05 Shipping Condition: New Location: Merrimack, United States This gear allows gearing down the feedrate to 1/2 what is shown on the quick change gearbox for extra fine surface finish. It is a DP16 gear with 48 teeth ... moreand 24 teeth. This gear has a 0.50" bore to fit the Atlas and other gear shafts.
Buy It Now
$12.50 Shipping Condition: Used Location: Sylvania, United States This is by far the largest group of Emco lathe owners in the world. "Emco FB2 Mill". Emco Maximat Miller.. Emco Compact 5 Unimill. Emco Compact 10. Emco ... moreCompact 8 (or Sears Craftsman).
Buy It Now
Free Shipping Condition: New Location: Livonia, United States This gear was removed from a new Enco 411-0106 lathe because it was not needed. 22 Tooth, 1.25 Mod 20° PA OD 29.77 mm. Gear Data.
Buy It Now
Free Shipping Condition: New Location: Livonia, United States This gear was removed from a new Enco 411-0106 lathe because it was not needed. 52 Tooth, 1.25 Mod, 20° PA ,OD 67.1 mm. Gear Data.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States One NEW MANUFACTURED ABS SHIFT COLLAR 9-50A (Slider) for reverse lead screw gearbox. Atlas and Craftsman 9-10 and 12" lathes. SEE PHOTO KEY! LATHE NOT ... moreINCLUDED. Photo 3:Example of Model D lathe the part fits.
Buy It Now
$9.20 Shipping Condition: Used Location: Sylvania, United States Emco Unimat DB200 SL1000. Emco Unimat 3. This is by far the largest group of Emco lathe owners in the world. "Emco FB2 Mill". Emco Maximat Miller.. Emco ... moreCompact 5 Unimill. Emco Compact 8 (or Sears Craftsman).
Buy It Now
Free Shipping Condition: New Location: Larkspur, United States Backlash in the range of. 001" to. 002" is possible when installed on an original lead screw that has little-to-no wear.
Buy It Now
$5.45 Shipping Condition: Used Location: Cape Neddick, United States Good used handle and screw.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Model: WM180V. WM180V lathe 1 Chuck Jaw 3 Gear 7(30/48/50/52/60/66/70). Motor: 110V brushless motor. Width of lathe bed: 3.94"(100mm). - Using pure copper ... morecore brushless motor, strong power, long life.
Buy It Now
$25.00 Shipping Condition: New Location: El Monte, United States The AUTOBOX Technical Support team are also U.S.-based. Autobox LLC. Spindle nose taper: MT#3. Carriage travel: 11.6" (295mm). Swing over bed: 7". Swing ... moreover cross slide: 4.3" (110mm). Lead screw support bearing on both ends (add one on left end) reduce vibrations, provide better cutting result, when using auto feed.
Buy It Now
Free Shipping Condition: New Location: Livonia, United States This gear was removed from a new Enco 411-0106 lathe because it was not needed. 38 Tooth, 1.25 Mod, 20° PA ,OD 49.9 mm. Gear Data.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Model: WM210V. WM210V lathe 1 Base oil pan 1 English manual 1. Miniature lathe is mainly used for processing the end face of various rotary surfaces and ... morerotating bodies. choose it you will not regret!
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Part is bronze Oilite bushed. Nothing else included. Besides, I love my Atlas 10" lathe. You ain't getting it! Reduces carriage feed rate in 1/2. QC (Quick ... moreChange) Craftsman and Atlas 10" and 12" lathes suffer from too fast of a minimum feed rate for turning at. 0042" per revolution.
Buy It Now
Free Shipping Condition: New Location: Livonia, United States This gear was removed from a new Enco 411-0106 lathe because it was not needed. 44 Tooth, 1.25 Mod, 20° PA ,OD 57.1 mm. Gear Data.
Buy It Now
$1.99 Shipping Condition: New Location: China Its pitch is 2mm. The two half nuts for mini lathes that use a top and bottom half nut design. Both sides are threaded to ensure good performance from ... morethe lead screw.
Buy It Now
$21.97 Shipping Condition: Used Location: Ottawa, United States Feed Reverse Bracket and Gears.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Power: 1100W(1.5HP). Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. choose it you will not ... moreregret! Width of lathe bed: 3.94"(100mm). Swing Over Bed: 8.27"(210mm).
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Model: WM210V. WM210V lathe 1 Chuck Jaw 3 Gear 11 (75/72/70/66/60/60/52/50/48/40/30). Width of lathe bed: 3.94"（100mm）. Lathe sizes: 31.9" 11.8" 13.8"（81 ... more30 35cm）. Note: We provide optional parts for this lathe.
Buy It Now
$6.05 Shipping Condition: Used Location: Cape Neddick, United States Very good used condition.
Buy It Now
$12.50 Shipping Condition: Used Location: Sylvania, United States This is by far the largest group of Emco lathe owners in the world. "Emco FB2 Mill". Emco Maximat Miller.. Emco Compact 8 (or Sears Craftsman). Emco Compact ... more10. Emco Compact 5 (or Sears Craftsman).
Buy It Now
Free Shipping Condition: New Location: China SIEG SC4/JET BD-8A/MANROD MR-320/SIDAMO TP 510/SOGI M2-450D/JETCO JML-3S/OTMT SC4/SMART SL-410X4-BL. Nut for Cross Slide Feed Screw on SC4 lathes.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Power: 1100W(1.5HP). Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. choose it you will not ... moreregret! Width of lathe bed: 3.94"(100mm). Swing Over Bed: 8.27"(210mm).
Buy It Now
Free Shipping Condition: New Location: United States The complete and easy-to-read manual makes it easier to assemble and maintain your lathe. An efficient benchtop machine with a powerful 1 HP motor, and ... moreall the features you need for accurate machining on every project!
Buy It Now
$4.50 Shipping Condition: New Location: Cross Plains, United States The below video is a demonstration showing the use of a simple carriage stop with a dial indicator. This makes it easy to "know" when you are about to ... moresee the correct "0" point to stop the carriage feeding.It was very easy to stop within 0.005 - 0.010" of a position.This allows you to "manually" advance the carriage to finish the cut if desired.This indicator works very good.Also, you can set tension on the indicator/stop clamp so if an overrun occurs the indicator stop will simply slide.
Buy It Now
$11.50 Shipping Condition: Used Location: Sylvania, United States Emco Unimat DB200 SL1000. Emco Unimat 3. This is by far the largest group of Emco lathe owners in the world. "Emco FB2 Mill". Emco Maximat Miller.. Emco ... moreCompact 5 Unimill. Emco Compact 8 (or Sears Craftsman).
Buy It Now
$12.50 Shipping Condition: Used Location: Sylvania, United States Emco Unimat DB200 SL1000. Emco Unimat 3. This is by far the largest group of Emco lathe owners in the world. "Emco FB2 Mill". Emco Maximat Miller.. Emco ... moreCompact 5 Unimill. Emco Compact 8 (or Sears Craftsman).
Buy It Now
$43.99 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Power: 1100W(1.5HP). Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. Width of lathe bed: 3.94"(100mm). ... moreRC-210E lathe 1 Oil can 1 Base oil pan 1 Open spanner 2.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. - In the X axis direction can be automatic ... morefeed, no manual;Automatic feed speed can be adjusted;Automatic feed range reached 0.01mm-0.4mm!
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Lathe grooving tool holders parting tool holder+insert MGEHR1616-3T21H MGGMN300 For external grooving and cut-off turning Machining width 3mm, depth 21mm. ... moreThe tool shank is made of spring steel, heat-treated and finish-machined, the Impact resistant, durable and not easy to deform. Cutter shank size is 16mmX16mm. Blades are hardened and coated. Width is 3mm. Can process steel, stainless steel. Products include mgehr1616-3t21h 1pcs MGGMN300 10PCS.
|
|
|
|
ATLAS CRAFTSMAN 10" 12" METAL LATHE TAILSTOCK FEED SCREW 10D-34 AND RAM 9-8
NICE ORIGINAL TAILSTOCK FEED SCREW AND RAM FOR AN ATLAS 10" OR CRAFTSMAN 12" LATHE. DIAL IS CLEAR AND LEGIBLE. INTERIOR BORE IS ALSO NICE AND CLEAN. INCLUDES WOODRUFF KEY AND NUTS. FEED SCREW PART NUMBER 10D-34. RAM PART NUMBER 9-8. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Change Gears for Atlas, Craftsman, 6” Metal Lathe, Threading, Feed
I believe this gear set is for an Atlas craftsman 6 inch metal lathe. Gear set is in good condition. the teeth count are: teeth count is 52.36,32. Gears have to slots/keys. hole diameter is.75
|
|
|
Original Atlas Th54 metal lathe saddle drive feed screw and handle assembly.
Original Atlas Th54 metal lathe saddle drive feed screw and handle assembly
|
|
|
RARE+FINE USED ORIGINAL ATLAS CRAFTSMAN DUNLAP 109 METAL LATHE HAND FEED KNOB
RARE+FINE USED ORIGINAL ATLAS CRAFTSMAN DUNLAP 109 METAL LATHE HAND FEED KNOB Click to Enlarge RARE AND ORIGINAL CRAFTSMAN DUNLAP 109 METAL LATHE LEADSCREW HAND FEED KNOB ASSEMBLY. CLEAN AND FINE FINISH. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
UNIMAT METAL LATHE W/ POWER FEED 3 JAW CHUCK TOOL POST DRILL CHUCK MACHINIST
DESCRIPTION: USED. UNIMAT METAL LATHE. IT HAS THE POWER FEED ATTACHMENT, 3 JAW CHUCK; DRILL CHUCK AND TOOL POST. THE MOTOR RUNS FINE. THE BELT IS A THIN O-RING AND DOES NOT WORK WELL. I TRIED THE POWERFEED AND IT WORKS. THE CHUCKS OPEN AND CLOSE FINE. NO KEY FOR THE DRILL CHUCK. LOOK AT THE PICTURES. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: ... moreNO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts"
|
|
|
Southbend Machinst / Metal Lathe, 42" Bed, Power Feed
Up for sale is a Southbend metal lathe with power-feed and a 42" bed. It will need a plug wired up and worked fine before removal. Must pick-up and sorry but not accepting paypal at the moment. Normal 0 false false false EN-US JA X-NONE Surplus Equipment We have a collection of Machinery andEquipment(M&E) And Associated Tooling and accessories, surplus to ourneeds that we would like to sell. All items are in good condition and underpower. We have a small website containingpictures of most of our offering and a spread sheet with basic descriptions andinformation. It is still a work-in-progress. We would prefer to sell theequipment in bulk. Or by selected packages of grouped equipment. I.E. 1. Brakes. Presses, And Shear 2. Material Handling 3. Oven 4. Paint Spray 5. XP Explosion ProofLighting Fixtures. Exhaust Duct Fans, and Motors ... more6. Welders 7. Dip Tanks 8. Large Capacity VerticalPumps 9. Other Motors 10. Other Popular Equipment ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14028ae8c2c-0xf6-
|
|
|
UNIMAT DB200 Metal Lathe, Mill, Power Feed, 4-jaw chuck, table saw, slow speed
UNIMAT DB200 Miniature Metalworking System Metal Lathe. Milling Machine, Table Saw Early. CAST IRON, Red Badge" Unimat Lathe with U90 Motor Includes the following attachments POWER FEED ATTACHMENT(adds automatic feed of the toolbit into the workpiece) SLOW SPEED ATTACHMENT(increases the speed range. Adding slower speeds) QUICK-CHANGE TOOLPOST(CUSTOM INDEXABLE TOOLPOST. 1 toolholder, and material to make 4 more) TABLE SAW(includes home-made table. Fence, arbor and 3 blades) 3 JAW CHUCK(self-centering. Marked EMCO) 4 JAW CHUCK(independent. Not marked, with key) MILLING COLUMN(original. Cast iron post) MILLING FEED HANDLE(moves spindle up/down for drilling) MILLING TABLE(with 2 clamps. 2 extra nuts, and two chuck adapters) MILLING VISE DRILL CHUCK(with key) FACE PLATE(with lathe dog) GRINDING WHEEL ARBOR HANDWHEEL(original. For use w/o ... morethe power feed, handle replaced) Note about the toolholder: I designed and machined the included tool post system to work specifically with the Unimat. It uses the same 5mm wrench for all adjustments and changing out toolholders. It is a miniaturization of the KRF style toolposts advertised in Home Shop Machinist. I have a full-size version on my Atlas metal lathe and have used it for more than 20 years. I am including the 48-position indexable toolpost and one completed toolholder. I am also including 4 additional blanks and all fasteners needed for you to complete your own set to your liking. If you would like to see a close-up of another set I made for my nephew. Go to the Littlelocos Model Engineering FACEBOOK page. Be sure to check out the following video demonstration of the Unimat's operation: Video URL: http:youtu.be/zWMMJeINLfA(As a bonus. I will be sending along the tool bit and brass rod shown in the video. The surface finish is like a mirror and is AS CUT. Without any polishing. Condition: This item is in good. Used condition having normal, minor marks from years of use. See the detailed photographs of this item to see the specific condition. Specific it
|
|
|
Rockwell 10" Metal Lathe Feed Reverse Bracket & Gears
The bracket is marked MBL-133 Shaft Diameter 1-1/4" The two reversing gears are 35 tooth. The large stud gear is 40 teeth The small one is 30 teeth P lease visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
Atlas 6" metal lathe cross feed screw cover,Atlas metal lathe 101
Atlas 6" lathe.This covers the cross feed screw at the rear of the saddle.M6-37,good condition a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14153a72928-0xfb-
|
|
|
ATLAS 10 12 METAL LATHE CHANGE FEED GEARBOX
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ Nice gearbox good condition gears are good needs dirt/grease cleaned up please see pictures; selling as shown check out my other listings of chucks. Chick vises and tooling ... moretooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax- Please contact me through ebay message system. Thank you!
|
|
|
Craftsman 109 Metal Lathe Feed Screw Hand Wheel Knob
Auction Wizard 2000 Listing Template- AW2KLOT#5853 Craftsman 109 Metal Lathe Feed Screw Hand Wheel Knob Good. Used condition. Set screw intact.
|
|
|
Metal Lathe Cross Feed Screw,south Bend Lathe,logan Lathe
Cross feed screw with large dial. Nice unit and seems to have very little play in the screw and nut. Measured with a tape measure and getting 10tpi Posted with
|
|
|
ORIGINAL ATLAS CRAFTSMAN 6" METAL LATHE LEAD FEED SCREW ASSEMBLY L9-35 618 101
ORIGINAL ATLAS 6 In. LATHE FEED SCREW& BRACKET ASSEMBLY LEFT LEAD SCREW BEARING PART No. L9-35 The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1440c59c816-0xfe-
|
|
|
ORIGINAL SOUTH BEND 9" 10K METAL LATHE TOOL POST COMPOUND FEED BRASS NUT PT95NK1
ORIGINAL SOUTH BEND 9"10K METAL LATHE COMPOUND NUT PT NO. PT95NK1 The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
Craftsman Sears Model 109 6" Metal Lathe Half Nuts Feed Lever with Ball & Spring
Craftsman Sears Model 109 6" Metal Lathe Half Nuts Lever with Ball& Spring Atlas The half nuts and lever are in fine condition with some wear. The threads are in fine condition with some wear. Comes with ball and spring. It is off of a Craftsman Sears Model 109.20630 6" Metal Lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $6. 5 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
Atlas / Craftsman 10" or 12" Metal lathe cross feed gear and knob
Up for sale is the cross feed knob and gear for a 10" or 12" Atlas or Craftsman lathe. I will work with you regarding shipping if you buy multiple items. I will only ship in the US continental 48 states. NO INTERNATIONAL shipping. Shipping will be set at $4.00. Any questions let me know.
|
|
|
Vintage South Bend Metal Lathe Tool Post Compound Feed Assembly Parts Lot 9"
A working condition original vintage South Bend metal lathe tool post compound assembly. This came off of an early South Bend lathe with a 9" swing and a 3 foot bed. A small chunk missing from front left jaw area. See 1st photo. Sold as is. High bidder to please add a $13.00 priority mail fee. Thanks for looking!
|
|
|
ORIGINAL SOUTH BEND 9 10K METAL LATHE APRON CARRIAGE WORM FEED GEAR AS203NK1
SOUTH BEND 9"10K METAL LATHE WORM GEAR PT NO. AS203NK1 The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions!
|
|
|
ORIG SOUTH BEND 9" 10K METAL LATHE QUICK CHANGE FEED GEAR BOX ASSEMBLY MODEL A
ORIGINAL SOUTH BEND 9"10K LATHE COMPLETE QUICK CHANGE GEAR BOX ASSEMBLY The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
SOUTH BEND 10 METAL LATHE FEED CHANGE GEAR BOX 57
SOUTH BEND 10 METAL LATHE FEED CHANGE GEAR BOX 57 Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through email with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~ no thread chart some rust threaded shaft on end is bent some. Needs filed check out other listings for more tooling auctions: Lathes may vary in models/years/etc; ... moreplease be sure you are bidding on the correct item for your lathe. I do my best to get correct information to you. As always. Please check your measurements and identification marks before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax- Please contact me through messages with any questions. Thank you! 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-14503a89423-0x12d-
|
|
|
Vintage South Bend 9" Metal Lathe Feed Reverse Lever & Gears Assembly
For auction is a vintage 9" southbend lathe feed reverse lever and gear assembly. Bidders. I accept pay-pal only and payment is due with in 3 days of the purchase. I will ship your purchase to you with in 3 business days. This item will ship parcel post. I ship in the US Only. All items are sold as is. Please ask questions before bidding.
|
|
|
Craftsman 6" Metal Lathe Feed Screw Original Handwheel AA 109 20630
Craftsman 6" Metal Lathe Lead Screw Handwheel Please see my other auctions for more 109 lathe parts. I am very happy to combine items for shipping. If you win more than one of my auctions either wait for a combined invoice or pay the full amount and I will refund excess postage. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1459fcbc5c8-0x102-
|
|
|
Craftsman 6" Metal Lathe Swivel Base Feed Screw & Compound Swivel Nut AA 109
Craftsman 6" Metal Lathe Swivel Base Feed Screw and Compound Swivel Nut Please see my other auctions for additional 109 series lathe items. I am very happy to combine items for shipping if it makes sense. If you win more than one of my auctions either wait for a combined invoice or pay the full amount and I will refund any excess postage.
|
|
|
Craftsman 101 6" Metal Lathe Carriage Feed Screw w/ Dial & Ball Handle Atlas 618
Craftsman 101 6" Metal Lathe Carriage Feed Screw with Dial& Ball Crank with Handle Atlas 618 101.07301 The feed screw. Dial and ball crank are in fine condition with some wear. The ball handle shows some wear. The threads are in fine condition. The dial is legible with some wear. See pictures. From a Craftsman 6" Model 101.07301 metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12. 0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
Craftsman 101 6" Metal Lathe Compound Lower Swivel Feed Nut Atlas 618 101.07301
Craftsman 101 6" Metal Lathe Compound Lower Swivel Feed Nut Atlas 618 101.07301 The feed nut is in fine condition with some wear. The threads are in fine condition. See pictures. It is off a Craftsman 6" Model 101.07301 metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $4. 0 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146a71bda5b-0x11d-
|
|
|
Change Gears for Atlas 618, Craftsman 101, 6” Metal Lathe,Threading, Feed 9 pc.
Change gears all in great condition.What part numbers are there have been photographed. Ships same day as payment received Please see my other listings for 101 lathe parts Thanks
|
|
|
Craftsman 101 12" Metal Lathe Carriage Saddle Feed Screw w/ Dial & Handle Atlas
Craftsman 101 12" Metal Lathe Carriage Saddle Feed Screw with Dial Gear Crank and Handle Atlas The feed screw. Dial, gear, crank and handle are in fine condition with some wear. The threads are in fine condition with some wear. The dial is legible. It has some grey paint on the handle and the crank shows some wear where the end nut screws down. The end nut is not original. The screw shaft has some wear where the dial screws down. See pictures. It is off a Craftsman 12 inch Model 101.07403 metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12. 0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions ... moreend. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
ORIGINAL SOUTH BEND 9 10K METAL LATHE COMPOUND REST TOP DIAL FEED SCREW & HANDLE
Offered is a nice used Compound Feed screw assembly W/ nut for a 9 or 10" South Bend Lathe. There is minimal backlash between the nut and the Screw.
|
|
|
ORIGINAL SOUTH BEND HEAVY 10 METAL LATHE QUICK CHANGE FEED GEAR BOX ASSEMBLY
ORIGINAL SOUTH BEND HEAVY 10(10L) METAL LATHE COMPLETE QUICK CHANGE GEAR BOX ASSEMBLY The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
|
|
|
Unimat-SL DB200, Power Feed Attachment, Metal Lathe, Lots Of Extras, NO RESERVE
This auction is for a Unimat SL DB200 lathe. This unit is in good working condition. Included with this auction are numerous accessories such as: tail stock w/ spindle handle. Power feed(hard to find expensive attachment) ball bearing live center, dead centers, drilling vise, head stock raising block, face plate, milling plate, lathe dog, self centering chuck, independently adjusting chuck, t slot adapter, and as you can see more cutters than you'll ever need. Feel free to ask any questions. This is a no reserve auction so bid to own. Thanks!
|
|
|
7" X 10" Precision Metal Mini Lathe - TOOLING INCLUDED Auto Feed Variable Speed
This is a used but in great condition lathe. i bought it brand new a couple months ago and I used it for about a total of 8 hours to make a hand full of rings out of 6061 aluminum and now i have no use for it. It works perfect! Included in this auction is(4) large diameter drill bits. All the necessary tooling you will need, 1) mini lathe chuck for drilling ends and(1) digital micrometer. All these items are NOT normally included in the purchase of the lathe by itself and are worth about $150 combined. Free Shipping. Please feel free to email me with any questions. Description. Whether you’re turning. Counter facing or making bushings, spindles, prototypes or models, this precision mini lathe will meet the challenge! With 18 threads, automatic feed and a chuck guard with micro switch, this outstanding ETL listed mini lathe is ideal for use ... morein labs, workshops, engineering and educational settings. Automatic feed, Chuck guard with micro switch, Variable speed control knob, Speeds: 0-1100 RPM(low) 0-2500 RPM(high) Threads: 12 to 52 TPI, Tailstock taper: MT2, Tool post, ETL listed, Overweight Item subject to 14.95 additional Freight Charge. Specifications. Name 7" x 10" Precision Mini Lathe, SKU 93212, Brand Central Machinery, Certification ETL, Color Red, Distance between centers(in. 10 in. Maximum speed(rpm) 0-2500 RPM, Minimum Speed(RPM) 0-1100 RPM, Spindle Taper MT2, Tailstock taper MT2, Shipping Weight 87.00 lb. Thread size 12 to 52 TPI, Width between centers(in. 10 in. Warranty 90 Day, Available Only on Web No,
|
|
|
Monarch 12 KK Metal Lathe Feed Screw Support Bracket, Parts
This came off of a Monarch 12KK Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
ORIGINAL SOUTH BEND HEAVY 10 METAL LATHE APRON CARRIAGE WORM FEED GEAR
SOUTH BEND HEAVY 10 METAL LATHE WORM GEAR The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions!
|
|
|
South Bend 11" Metal Lathe Cross Feed Screw Nut Dial Handle Bush, Model 11-A
The screw is 1/2" 10TPI Left Hand threads. The threaded portion is 8-3/8" long. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
Sears Dunlap 109 6" Metal Lathe Carriage Saddle Feed Screw and Ball Crank Handle
Sears Dunlap 109 6" Metal Lathe Carriage Saddle Feed Screw and Ball Crank Handle with Pin The carriage feed screw is in fine condition with some wear. The ball crank handle is in fine condition with some wear. Comes with pin and collar. See pictures. They are off a Sears Dunlap 109.0703 6" metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $6.50 for USPS Priority Mail Shipping with Delivery Confirmation within the United States of America. I can combine shipping. International buyers please contact me for shipping charges before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
Atlas Craftsman 10" & 12" Metal Lathe - # 10F-19 Cross Feed Nut / JY 116
Hello Folks. This is a Cross Feed Nut, part# 10F-19. It is in good, used condition, and has No damages. Please see all pics. P lease check our Ebay store for other great collectibles. Trains, and tools, and as always don't hesitate to email us with any questions you may have regarding our items. We appreciate you. And thank you for shopping with us today, and as please know we take great care in wrapping your treasures so they arrive to you safely and promptly. We do appreciate your prompt payment, and take PayPal for your convenience. If payment cannot be made within 3 days please contact us to let us know, so we can make other arrangements such as a US Postal MO. We do turn over all unpaid items to Ebay for collection, and for credit on all of our Ebay fees. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14ae6bc7a13-0x112-
|
|
|
Atlas 10" 12" Metal Lathe Carriage Saddle Feed Screw w/ 16 Tooth Gear Craftsman
Atlas 10" 12" Metal Lathe Carriage Saddle Feed Screw with 16 Tooth Gear Part# 10F-36 Craftsman Part number 10F-36. The carriage saddle feed screw is in fine condition with some wear. The threads have some wear. The dial is worn and some of the dial readings are hard to see and are not legible. See pictures. The 16 tooth gear is in fine condition. Comes with feed screw. 16 tooth gear, dial, nuts and woodruff key. See pictures. It is off a Atlas 10" metal lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12. 0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. ... moreE-mail me with any questions. Posted with
|
|
|
109 109.0702 109.0703 6" Craftsman DUNLAP Metal LATHE FEED LEVER 3417
This listing is for a Craftsman Lathe DUNLAP FEED LEVER 3417 WILL NEED A GOOD CLEANING CAME OFF A Craftsman 6" Model 109.0702 LOOK A PICTURES FOR MORE INFORMATION. Click on"Lathe" in my store for more parts. Wait for invoice before paying. If you want combined shipping. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. I leave feedback as soon as the buyer does! You'll need to do your own research on your specific application. keep us in your favorite seller file and watch frequently for parts as they come up. If you have any requests. We can check it out for you. So, watch for these items coming in the near future. ... moreWe will combine shipping for multiple auctions won. Message me with any questions. THAT IS THE BEST WAY TO GET A HOLD OF ME. Good Luck and Happy Bidding! SELLERS TERMS AND PROCEDURES We will e-mail winners within 24 hours of the winning bid and an invoice. Upon payment. We will then ship the item(s) within 3 business days. We would also ask that you e-mail us after you receive your shipment to let us know that it was received satisfactorily and them please leave us feedback and we will do the same for you. Buyer pays all shipping costs. PayPal via checking account or paypal account.
|
|
|
South Bend 11" Metal Lathe Feed Reverse Gear Bracket Gears, Model 11-A
The double gears are 24 teeth. The larger gear is 48 teerh 16DP No missing teeth. Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
South Bend 9" Metal Lathe Cross Slide Feed Nut
South Bend 9" Metal Lathe Cross Slide Feed Nut The cross slide feed nut is in the fine condition with some wear. The threads are in fine condition with some wear. It has some wear on the side and top edge. Comes with a screw. 7/16" x 10 TPI left hand threads. 11/16" diameter neck. See pictures. It is off a South Bend 9" Model A metal lathe. Please e-mail me with any questions or for additional pictures. Winning bidder pays $4.00 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
Rockwell metal lathe 10" (25-700) - feed reverse lever
This unit is used but in a working condition. It is slightly noisy but it can be improved by replacing the gear stud which is not original. Paint is original. Set screws for positioning forward and reverse directions should be adjusted after installation on the lathe(per 25-700 manual) Please feel free to ask questions before buying.
|
|
|
Atlas Craftsman 10" 12" Metal Lathe Cross Slide Screw Feed Handle
Good condition Please review photos and email any questions AC
|
|
 |