|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: Clare, United States Variable Speed drive for Monarch 10EE lathe. Specifications: Brand: Reliance Volts: 220/440 Phase: 3 Condition: Unknown SHIPPING OPTIONS: Standard Truck ... moreFreight (4 to 8 Days delivery time): Contact for Quote Local Pickup: FREE International Shipping: Please contact for Quote Mullett Industrial Sales contact info: mark at mullettindustrialsales.com Office: [phone removed by eBay] Also please check out our website!.
Buy It Now
$9.65 Shipping Condition: Used Location: Moulton, United States Used original Monarch Emblem for Lathe.
Buy It Now
$9.60 Shipping Condition: New Location: Beaumont, United States This 3D printed cross slide end cover is a must-have for any Monarch 10EE square dial lathe owner.
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Condition: For parts or not working Location: Bristol, United States MONARCH 10EE LATH. HYDRAULIC SPINDLE DRIVE, UNTESTED. MACHINE HAS BEEN SITTING FOR TEN YEARS AND MAY REQUIRE SERVICING. MISSING ONE COVER. AVAILABLE FOR ... moreINSPECTION IN DELANO CALIFORNIA PICK UP ONLY WE WILL LOAD ON YOUR TRUCK.
Buy It Now
Condition: Used Location: Orange City, United States Greenway Product Number: 10912. Distance between centers.. 20”. Maximum swing over bed.. 12 ½”. Drill chuck.
Buy It Now
Condition: Used Location: Fountain Valley, United States Monarch 10 EE 12.5" x 20" Lathe. SWING OVER CROSS SLIDE7 1/4". WING OVER BED12 1/2". Equipped With HORSEPOWER3 H.P. DISTANCE BETWEEN CENTERS20". CROSS ... moreSLIDE TRAVEL8".
Buy It Now
$19.86 Shipping Condition: For parts or not working Location: Plainville, United States Only significant issue is chip gone from right front corner of slide which doesn't affect function.
Buy It Now
$10.34 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Lathe Cross Feed Assembly Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$13.60 Shipping Condition: Used Location: Crookston, United States Apron handwheel for a Monarch 10ee lathe. Has welding on it- otherwise in good shape.
Buy It Now
$13.86 Shipping Condition: For parts or not working Location: Plainville, United States
Buy It Now
$13.15 Shipping Condition: Used Location: Plainville, United States Here's the thread dial assembly for a Monarch 10EE round dial version. It's complete and just bolts onto the right hand end of the carriage. It's dirty, ... morebut in good shape.
Buy It Now
$13.60 Shipping Condition: Used Location: Crookston, United States Good used Monarch 10ee apron handwheel. Looks to be cast aluminum.
Buy It Now
Free Shipping Condition: New Location: Franklin, United States
Buy It Now
Free Shipping Condition: New Location: Franklin, United States
Buy It Now
$18.40 Shipping Condition: Used Location: Tewksbury, United States For sale is a used Monarch 10EE Lathe T-slot 11" Face Plate. Has a D1-3 mount. Parts of the T-slots are broken (see pics). The face plate still has usable ... morearea for the T-slots outside of 6". I thought this would still be useful for a fixture plate, if you drilled and tapped holes in the desired area.
Buy It Now
$11.70 Shipping Condition: For parts or not working Location: Plainville, United States The cross slide with tapered gib from a 1941 Monarch 10EE round dial lathe.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Set of cross slide and compound nuts for a monarch 10ee. They have 5/8-8 threads in the cross slide nut and 1/2-10 in the compound nut. Please look at ... moreyour original parts to see if they match up before ordering. Shipping is FREE to U.S. Thanks. Mike
Buy It Now
$18.40 Shipping Condition: Used Location: Tewksbury, United States For sale is a Monarch 10EE lathe Steady Rest, in lightly used condition, the paint in worn and chipped, the fingers have little to no wear and move in ... moreand out freely.
Buy It Now
$13.53 Shipping Condition: For parts or not working Location: Plainville, United States The Gear selector plate with all knobs from a 1941 Monarch 10EE round dial lathe.
Buy It Now
$11.70 Shipping Condition: For parts or not working Location: Plainville, United States
Buy It Now
$2.00 Shipping Condition: New Location: Mapleton, United States Their lathes are still known for high precision and robust construction, capable of withstanding decades of production use. Even though manual lathes ... moreare now a glut on the used-machinery marketplace, later model Monarch lathes in good condition are still highly desirable.
Buy It Now
$79.77 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Round Dial Lathe Carriage Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$14.25 Shipping Condition: New Location: Middleburg, United States This is the smaller tube of the three tube set for Monarch Modular Drive lathes.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Menifee, United States I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Normal 0 false false false EN-US JA X-NONE Monarch EE. 13” Lathe, Operators, Parts Lists and Assemblies Manual Year(1954) This Manual Covers Models: EE 3 13” This Manual Includes: Parts Catalog(60 pages) EE Master Operators Manual Assembly Drawings(Sheet 100 to Sheet 177) Operators Manual(Speedi-Matic) This Manual Has 158 Printed Pages. Year 1954 All Manuals come Spiral Bound with Shop Grade Transparent Plastic Front and Back Cover. Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail.
Buy It Now
$19.14 Shipping Condition: Used Location: Dekalb, United States Now you can!
Buy It Now
$14.13 Shipping Condition: Used Location: Hoffman Estates, United States These are the ones you need to run your modular machine off 480v.. NOT 220v. Off a 1973 machine. Good used condition. Save energy this year by running ... moreyour machine at a higher voltage. Check out the photos!
Buy It Now
$98.44 Shipping Condition: Used Location: Roanoke, United States Monarch 10EE Round Dial Lathe Front Door with Hinged Collet/Tool Rack Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$13.53 Shipping Condition: For parts or not working Location: Plainville, United States The front door trim bars (11-1/2" long) from a 1941 Monarch 10EE round dial lathe.
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States Keep your Monarch Square Dial lathe running well and well lubricated. These wipers cross reference to the original Monarch part number EE-1558. Wipers ... moreare sold in sets of 4 and are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
$17.60 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Round Dial Lathe Lead Screw Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$22.00 Shipping Condition: Used Location: Heyworth, United States Monarch Lathe 10EE Steadyrest in good condition. 6 3/4" from center to flat on bottom. 3" hole. Thanks for looking.
Buy It Now
Condition: Seller refurbished Location: Berea, United States MONARCH 10EE LATH. HYDRAULIC SPINDLE DRIVE, UNTESTED. MACHINE HAS BEEN SITTING FOR TEN YEARS AND MAY REQUIRE SERVICING. MISSING ONE COVER. AVAILABLE FOR ... moreINSPECTION IN DELANO CALIFORNIA PICK UP ONLY WE WILL LOAD ON YOUR TRUCK.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Port Richey, United States Monarch 10" EE Lathe. Through the 1950s, the WiaD drive was redesign and improved. ". Our Manual. "10EEs were being built during WW2. There are many of ... morethese still around for sale in the used machinery marketplace.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States EE, 60, M, N and NN. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Pictures of the Machine Says A Thousand ... moreWords. I will search for your specific Needs Continually.
Buy It Now
$6.16 Shipping Condition: Used Location: Roanoke, United States Monarch 10EE Round Dial Lathe Selector Knob Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$6.50 Shipping Condition: Used Location: Sopchoppy, United States MONARCH 10EE LATH. HYDRAULIC SPINDLE DRIVE, UNTESTED. MACHINE HAS BEEN SITTING FOR TEN YEARS AND MAY REQUIRE SERVICING. MISSING ONE COVER. AVAILABLE FOR ... moreINSPECTION IN DELANO CALIFORNIA PICK UP ONLY WE WILL LOAD ON YOUR TRUCK.
Buy It Now
$14.60 Shipping Condition: Used Location: Dekalb, United States Now you can!
Buy It Now
$13.67 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Round Dial Lathe Speed Control Handle Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$6.16 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Lathe Carriage Wiper Set Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States In good used condition.
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States Keep your Monarch Square Dial lathe running well and well lubricated. These wipers cross reference to the original Monarch part number EE-1369. Wipers ... moreare sold in sets of 1 and are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$8.79 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Round Dial Lathe Carriage Rollers Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$6.16 Shipping Condition: Used Location: Roanoke, United States Monarch 10EE Round Dial Lathe Front Hooks Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$0.99 Shipping Condition: New Location: Ionia, United States Keep your Monarch Square Dial lathe running well and well lubricated. These wipers fit the Round Dial Monarch Lathes. Wipers are sold in sets of 1 and ... moreare very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
$5.85 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$6.16 Shipping Condition: Used Location: Roanoke, United States Monarch 10EE Round Dial Lathe Direction Lever Set Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States Keep your Monarch lathe running well and well lubricated. These w ipers are sold in a set and are very reasonably priced compared to OEM or used parts ... moreso don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
$6.16 Shipping Condition: Used Location: Roanoke, United States Monarch 10EE Round Dial Lathe Headstock Cover and Strainer Removed from a Monarch 10ee Round Dial Lathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$5.35 Shipping Condition: New Location: Ionia, United States Keep your Monarch Square Dial lathe running well and well lubricated. These wipers cross reference to the original Monarch part number EE-2420. Wipers ... moreare sold in sets of 2 and are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a set for your lathe.
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$6.35 Shipping Condition: Used Location: Nashville, United States
Buy It Now
$7.95 Shipping Condition: Used Location: Panorama City, United States This is the small cover door from a Monarch 10EE Lathe, complete with decorative strip and original hardware... I'm not sure which year 10EE but the part ... morenumber is EE2735... Please see pictures for details and condition... Shipped out fast with USPS Priority mail!
Buy It Now
$8.65 Shipping Condition: Used Location: Nashville, United States As shown in good condition with gear teeth in good shape.
Buy It Now
$83.61 Shipping Condition: Used Location: Roanoke, United States Monarch 10ee Round Dial Lathe Apron Assembly Includes Feed Levers, Feed reverse knob, half nut lever and all gears Removed from a Monarch 10ee Round Dial ... moreLathe MFGR's No. 7154 Date Built 12-1939
Buy It Now
$5.55 Shipping Condition: Used Location: Nashville, United States
|
|
|
|
MONARCH 10EE LATHE
MONARCH 10EE LATH. HYDRAULIC SPINDLE DRIVE, UNTESTED. MACHINE HAS BEEN SITTING FOR TEN YEARS AND MAY REQUIRE SERVICING. MISSING ONE COVER. AVAILABLE FOR INSPECTION IN DELANO CALIFORNIA PICK UP ONLY WE WILL LOAD ON YOUR TRUCK.
|
|
|
MONARCH 10EE 10 X 30 TOOLROOM LATHE
MONARCH 10EE 10 X 30 TOOLROOM LATHE THIS LATHE HAS AN ALLEN BRADLY VARIBLE SPEED UNIT 480V 3PH 5HP WE HAVE NO WAY TO TEST 480V THIS WAS PROJECT I WAS GOING TO CONVERT TO 230V I NOW HAVE NO TIME TO FINISH. ALL ELSE SEEMS TO BE IN GOOD WORKING ORDER SHIPPING WEIGHT IS 3700.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f8fdd574e-0xfc-
|
|
|
Monarch 10EE lathe turret attachment
Here is a turret attachment for a Monarch 10EE lathe. The height from the bed flat to the turret tool centerline is around 6 1/2" so it appears this fits the later models. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
|
|
|
RARE GENUINE MONARCH 10EE LATHE QUICK CHANGE LATHE TOOLPOST MASTER HOLDER
GENUINE MONARCH Q.C. LATHE TOOLPOST HOLDER FOR 10EE LATHES TOOL HOLDERS(NOT SUPPLIED) FIT ON THE PIN AND DROP DOWN INTO SLOT. WITHOUT THE NEED TO TIGHTEN THEM DOWN MONARCH DID MAKE SEVERAL DIFFERENT HOLDERS THAT FIT THIS INCLUDING KNURLERS. BORING BAR HOLDERS, CUT-OFF AND REGULAR TOOLBIT HOLDERS COMPLETE WITH T-SLOT BOLT& NUT EXCELLENT CONDITION. A RARE FIND $12.50 S&H
|
|
|
Monarch 10EE Lathe Carriage Lock
This is a used carriage lock from a 1944 Monarch 10EE Lathe. Paypal only please. Shipping is $4.00 to the U.S.only via USPS Priority Mail. When it arrives. If you think the carriage lock is not as described, please return it to me within 14 days and I will refund the purchase price via Paypal. Questions? Please ask. Thank you for looking.
|
|
|
5" Dog Plate D1-3 Cam Lock Mount, from Monarch 10EE Lathe D1 - 3
5" Dog Plate D1-3 Cam Lock Mount. From Monarch 10EE Lathe D1- 3 Posted with
|
|
|
Monarch 10EE Lathe Speed Control Chain
This is the speed control chain from a 1944 Monarch 10EE Lathe. It is used to rotate the sprocket that controls the speed control potentiometers. Paypal only please. Shipping is $4.00 to the U.S.only via USPS Priority Mail. When it arrives. If you think the chain is not as described, please return it to me within 14 days and I will refund the purchase price via Paypal. Questions? Please ask. Thank you for looking.
|
|
|
Monarch 10EE Lathe - rear casting/cover
This is the rear casting/cover that sits on the lathe stand behind and below the headstock of a 1944 Monarch 10EE Lathe. The Monarch part number is: EE 1277. Paypal only please. Shipping is $12.00 to the U.S.only via USPS Priority Mail. When it arrives. If you think the casting/cover is not as described, please return it to me within 14 days and I will refund the purchase price via Paypal. Questions? Please ask. Thank you for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1418c1f7364-0xf6-
|
|
|
Monarch 10EE Lathe Speed Control Potentiometers
These are Ohmite speed control potentiometers from a 1944 Monarch 10EE Lathe. Please note: I attempted to check the resistance of both potentiometers. For the Armature potentiometer. Resistance measured across GF2- E2 goes from 0 ohms to 600 ohms at the mid-point of the rotation and stays at 600 ohms for the remainder of the rotation. For the Field potentiometer resistance measured across E1- F2 stays at 0 ohms for the first half of the rotation and then increases to 200 ohms for the remainder of the rotation. I cannot guarantee these measurements. Your readings may differ. Paypal only please. Shipping is $18.00 to the U.S.only via USPS Economy Mail. When they arrive. If you think the potentiometers are not as described, please return them to me within 14 days and I will refund the purchase price via Paypal. Questions? Please ask. Thank you ... morefor looking.
|
|
|
Monarch 10EE 10x20 Tool Room Lathe
Monarch 10EE 10x20 Tool Room Lathe. Serial# EE16435. Told by Monarch this one was made in 1939. Has Royal 5C Collet Closure, Taper attatchment, Machine lamp, and Live center. This guy is a little dirty, and has a broken Casting. But we had the electrical done on it so it is in running condition! Message for more information.
|
|
|
Monarch 10ee Face Plate 11 inch D1-3 Lathe Spindle 10 EE
11" Face Plate for Monarch 10EE Lathe in good used condition. This came from a dealer I used to frequent who retired. He coated it in rust preventative. Over the years it caught some overspray from the grey porch-paint he used to paint just about everything. I believe it will clean up very well. Free shipping anywhere in the 48 contiguous United States. 14 day unconditional money back guarantee. MY Ebay Policies can be summed up very simply as follows: I want my customers to be happy with the merchandise and service. I will try to provide accurate descriptions and photos so you know what to expect. I don't expect you to pay for my mistakes and. Likewise, I don't expect to pay for yours. I will try my best to keep shipping costs down whenever possible.
|
|
|
Monarch 10EE Lathe Front Panel / Cover
This is the small front panel/cover from a 1944 Monarch 10EE lathe. It measures 12 ¼ by 6 ¼. The Monarch part number is: EE 1262. Paypal only please. Shipping is FREE to the lower 48 only via USPS Economy Mail. When it arrives. If you think the panel/cover is not as described, please return it to me within 14 days and I will refund the purchase price via Paypal. Questions? Please ask. Thank you for looking.
|
|
|
**Last Week!! Monarch 10EE 10x20 Tool Room Lathe
Last Week For Sale! Monarch 10EE 10x20 Tool Room Lathe. Serial# EE16435. Told by Monarch this one was made in 1939, serial number reference book shows it as being made in 1941, and we recieved information from another party that it was made in 1943. Has a 12-1/2" swing, Royal 5C Collet Closure, Taper attatchment, Machine lamp, and Live center. This guy is a little dirty, and has a broken Casting. But we had the electrical done on it so it is in running condition! Message for more information. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14505dfbff7-0x106-
|
|
|
**FIXED PRICE - LAST ROUND!** Monarch 10EE 10x20 Tool Room Lathe
BACK FOR ONE LAST SHOT- NO AUCTION- FIRST BIDDER GETS IT! Monarch 10EE 10x20 Tool Room Lathe. Serial# EE16435. Told by Monarch this one was made in 1939, serial number reference book shows it as being made in 1941, and we recieved information from another party that it was made in 1943. Has a 12-1/2" swing, Royal 5C Collet Closure, Taper attatchment, Machine lamp, and Live center. This guy is a little dirty, and has a broken Casting. But we had the electrical done on it so it is in running condition! Message for more information.Message for shipping estimate or you can pick it up in beautiful Boise, ID! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1454503ab2c-0x117-
|
|
|
MONARCH 10EE LATHE FOLLOW REST
Offering a follow rest for a Monarch 10EE lathe In very good condition. Complete with all hardware Distance from side mounting hole c/l to spindle center is 6" Rear mounting holes are 7-1/4" cc Nice OEM item for your 10EE
|
|
|
1944 MONARCH 10EE 12½" x 20" Manual Engine Lathe
ebay template MONARCH 10EE 12½" x 20" Manual Engine Lathe I TEM S OLD A S P ICTURED Introduced in 1939 with a 12 inch swing(not the 10 inches that its name would suggest) and a capacity of 20 inches between centers. Today the Monarch 10EE Precision Toolroom lathe has a well-established reputation as one of the finest small lathes it is possible to buy. This 1944 model remains in very good working condition with a powerful 3 horsepower DC motor. Quiet sounding spindle, and smooth ways. FEATURES 8" Diameter 6-Jaw Buck chuck Tool Post Micro Carriage Stop Drill Chuck on tailstock Pan bed Includes a set of extra gears SPECIFICATIONS Swing Over Bed 12½" Swing Over Cross Slide 7" Distance Between Centers 20" Hole Through Spindle 1-13/32" Spindle Nose D1-3" Camlock Bed Width 10½" Compound ... moreRest Top Slide Travel 3" Tailstock Spindle Taper MT#2 Tailstock Spindle Traverse 5½" Max. Spindle Speed 25 to 2500 rpm Feeds. 30.001 to.0075 thousands per inch Power Requirement 220 Volt. 3 Phase, 60 Hz Dimensions 36" x 64" Approximate Weight 3.450 Lbs. Specifications subject to verification INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosm
|
|
|
Monarch 10EE 12.5" x 20" Lathe new in 1953
Our Price: $13.500.00 Status: USED EXCELLENT For more information: Call Dave Drozdenko at 860-484-4449 or email davidd@globalmachinebrokers.com Item# 11057 MONARCH Model 10EE. Serial Number- 35585 ITEM# 11057 Date Mfg. 7/1953 Hour meter with 2.229 hrs. 12.5" Swing 20" Between centers 3 Jaw chuck. 1.5" Thru hole. Threading. Taper attachment, Dial-in feed control Left/Right Hand Adjustment Dial Feed Carriage controls Adjustable dog stops on lower cross rail Built in catch pan. Work light Overall Dimensions- 5' 4"L x 33"W x 4' 1"H Estimated Weight- 3.000
|
|
|
Monarch lathe tail stock tailstock, older 10EE round dial 6.375" center height
Tail stock for Monarch 10EE lathe Fits old-style lathe with 6-3/8" between flat way and spindle axis Fits round-dial Monarch 10EE Features: This tailstock was designed for the older-height Monarch 10EE 6.375" from the flat way to the axis of the spindle Morse taper 2 in quill/ram. Very good condition, no burrs Morse taper keyway and knock-out slot in ram Graduated collar on ram Standard oil reservoir and oiling system Includes: Cam lock mechanism Underlug Locking lever(has been repaired. New knob brazed on) Set-over bolts for machining tapers Rubber/felt laminated wipers Wiper retainers Complete! Completely stripped. No surprises, no breaks, no repairs(other than the repaired lever knob) About 0.004" wear on the base of the tailstock. This is really not much wear for a tailstock of this vintage. Will need a new Gitts oiler ... morefor the top. Cheap and easy fix Check out this video to see details on this tailstock: Shipping to US only 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-146d0711efd-0x113-
|
|
|
Monarch 10EE Lathe Pulley
Used top pulley for 1941 Monarch 10EE. 7" Dia. 1.86 bore
|
|
|
Monarch 10ee precision lathe* 4,000 rpm* Taper attatchment* extras*
I have for sale a nice Monarch 10ee super precision lathe. This lathe has the variable 4.000 rpm headstock spindle, 12 1/2" x 20" travels, threading, taper attatchment, 3 jaw chuck, tailstock, etc. I have recently gone through the carriage and taper attatchment and installed all new bearings with new SKF bearings. machine is missing the coolant pump and the door cover for the coolant pump. I was going to install a new coolant pump however I never needed it. Coolant pumps are available OEM from Monarch or an aftermarket pump is easily installed for under $100. I will also include a KDK tool holder, and a couple extra tooling. Any questions feel free to message me. I will pallet. Secure, and Load this machine for shipping Free of Charge. I can also help the buyer find a shipper/trucking if needed.
|
|
|
Monarch 10EE Lathe. Complete Apron. Thread Dial Is In Another Sale And I Will
Monarch 10EE Lathe. Complete Apron. Thread Dial Is In Another Sale And I will combine them. Please note unit is working. Two handles have been fixed. Gear that rides lead screw has some wear but still working.
|
|
|
Monarch 10EE Lathe. Threading Dial
Monarch 10EE Lathe. Threading Dial ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1476f6252ad-0x103-
|
|
|
Monarch 10EE Lathe Threading Dial Great Shape Works Smooth Like It Should!
Monarch 10EE threading dial works nice and smooth same with the roller. It's in good shape for it's age. Also have a bunch of other 10EE parts if your looking for something message me and let me know what your looking for. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
|
|
|
MONARCH MODEL 10EE PRECISION TOOL ROOM LATHE 12.5"x 20" VARIABLE DIGITAL RPM
Monarch 10EE High Precision Tool Room Lathe. Machine runs on SINGLE PHASE 220 volt power. This Machine was professionally updated with a VFD(variable frequency drive) Controls and Motor. Machine runs like a dream. Year: 12-1955 Swing/Centers: 12.5"x 20" RPM: Variable Digital 2500RPM ++ Weight: 3500 lbs Electrical: 220 volt Single Phase Includes: Original 3 jaw chuck Taper Attachment Tailstock Steady Rest Large Steady Rest Small Follow Rest KDK tool post Any questions message me and I will return asap. I will load this machine onto buyer's flatbed. Trucking, shipper, free of Charge Buyer is responsible for shipping costs. I can help arrange flatbed shipping through my Broker;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147cfbe169e-0x11a-
|
|
|
Monarch 10ee Super Precision Tool Room Lathe
I'm selling a Monarch 10ee super precision tool room lathe. This lathe is in very good condition! The lathe ways has been rebuilt and reground as well. Local pick-up only. As already stated. The item location is not in Doylestown but 25 minutes away from Doylestown in Warminster, PA.
|
|
|
Monarch 10ee precision lathe* 4,000 rpm* Taper attatchment* 1963 college lathe
Monarch 10"EE Standard Engine Lathe. 12.5" Swing x 20" Centers Manufacturer: Monarch Model: 10EE Year: 1963 Condition: Used This lathe has been bought in 1963 by the Trois-rivières Technical institute which became part of CEGEP Trois-rivières(College) in 1968. It has been use as a training lathe for many students and never used for production purpose. It has a taper attachment. Specifications: Model: 10EE Serial: 46172 Actual Swing: 12.5" 315 mm) Distance Between Centers: 20" 500 mm) Hole Through: 1.5" Spindle Speeds(Variable) 40-4000 RPM Voltage: 550 From Bill(10EE proud owner) Thank you Michel. These are the Rolls Royce of super precision toolroom lathes. I have a’52. Serial 36004. No. Not 10x20 Michel, they are tagged as a 12.5” x 20” lathe, but you can easily clear 13” on them. And your estimate ... moreof the current price of a 10EE from Monarch is way off at $75k… they still sell them, but for US $95,000 + options you want added. Good luck selling yours. A very reasonable price at $10k. I would not sell mine for less than $10k. Cheers. Bill The item is located in St-Janvier. Quebec, canada. This item is Made in USA. It should be easy to ship it to USA. Any fair and realistic offer will be consider. Fell free to ask any questions by email or phone at 450-623-0133 asking for Michel.
|
|
|
BUCK 6" 3-JAW ADJUST TRUE LATHE CHUCK D1-3 MOUNT - MONARCH 10EE CLAUSING LOGAN
This auction is for a 6" Buck 3-Jaw lathe chuck. This is an'adjust-tru' meaning it can be centered on the backplate via the four screws on the side. It has a D1-3 spindle mount. This is an older chuck but it has a nice smooth firm movement and aside from some minor dings it looks good and it operates very well. No reverse jaws or key included I'm afraid. I'm offering this including the Priority mail shipping so get it while you can. FREE PRIORITY SHIPPING ALWAYS INCLUDED(Items usually ship out the same day! CHECK OUT MY END MILLS AND INSERTS FOR SOME OF THE BEST PRICES(AND SERVICE) ON EBAY!
|
|
|
1961 MONARCH Lathe TURNING MACHINE CATALOG RR508 10EE 1000 52 62 612 610 170 80
This sale is for ONE previously owned COPY(original not a photocopy) of: Monarch Machine Tool Co. MONARCH TURNING MACHINES. Sidney 1961) 31 pages bound in a soft cover with minor wear along the spine. This catalog displays images and describes the features and specifications for: swing lathes(models: EE, 1000, series 62, 612& 610) heavy-duty lathes(series 170, series 80 and series 91) production lathes(models 20-H, 21-H& numerical controlled) tracer controlled(air tracer, rotary profile tracer, contour turning& elecror gage tracer) and special lathes(models B, K, and testing lathes. ALSO INCLUDED in this sale is a pieces of correspondence dated 1961 from the company regarding the catalog. T his item is in excellent overall condition and would be a good resource for the owner of one of the machines and/or make a nice gift for the ... morecollector of Monarch products. These PUBLICATIONS are being offered at an exceptional price. A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. Please check my other auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. I have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. A
|
|
|
Monarch 10EE Lathe Bed Bolts, Apron Lock, End Cover Hindge, Levelers
Monarch 10EE Lathe Parts. Bed to Base bolts and shims, End Cover Hindge Parts, Apron Lock, small wedge with shim keeps coolent in the lathe, Base Levelers I dont think these go to a 10EE but they are nice. The size is 1.5MM pitch.777 inch dia.
|
|
|
Nice Monarch 10ee lathe chuck shield coolant shield guard bracket
You are bidding on a factory chuck guard bracket for a Monarch 10EE lathe. As you can see in the pictures. It is in excellent condition. See my other items for more 10EE tooling including the extremely rare follow rest. I am always happy to combine shipping. This is a no reserve auction.
|
|
|
Really nice Monarch 10ee lathe follow rest Rare carbide pins toolroom lathe
You are bidding on a really nice follow rest for a Monarch 10EE lathe. It has the carbide pins that contact the work piece. As you can see in the pictures. It is in excellent condition. From what i can tell this is an extremely rare item. See my other items for more 10EE tooling. I am always happy to combine shipping. This is a no reserve auction.
|
|
|
Monarch 10EE Lathe Rheostat Chain
This is the chain used to control the rheostat on a 1944 Monarch 10EE lathe. The chain is in good original condition. Shipping is $4.00 to the US only via USPS Priority Mail. Small Flat Rate Box. When it arrives, if you think the chain is not as described, please return it to me within 14 days, and I will refund the purchase price via Paypal. Questions? Please ask. Thank you for looking.
|
|
|
Monarch T6- T7 high voltage 10EE lathe transformers
Two Used. Working when removed 10 EE high voltage transformers. I needed lower voltage for my application.
|
|
|
MONARCH PRECISION TOOLROOM LATHE 10EE (28685)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock number: 28685. MONARCH PRECISION TOOLROOM LATHE MOEL 10EE SERIAL NUMBER: 52506 GENERAL SPECIFICATIONS Swing Over Bed: 12-1/2" Swing Over Cross Slide: 7-1/4" Distance Between Centers: 20" Spindle Bore: 1-13/32" Spindle Nose: D-1 Camlock Spindle Speed Range: 40- 4000 RPM Feed Rates: 50) 0005" 016" Threads: 60) 3- 184 TPI EQUIPPED WITH 5 HP Drive Motor Inch/Metric Threading Inch/Metric Dials Taper Turning Attachment Electric Lead Screw Reverse Attachment Sony Two Axis Digital Readout 7-1/2" 3-Jaw Chuck. 8-1/4" 4-Jaw Chuck Aloris Quick Change Tool Post Chuck Guard Approximate Weight: 3400 Lbs. F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING ... moreOR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 513-542-8400 800-745-6008 Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157 ICCI: Tyler Rose 1-888-773-6785 Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308 All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense
|
|
|
monarch 10EE lathe selector plate
Selector plate from a 1946 monarch 10ee
|
|
|
monarch 10EE lathe belt tensioners
Belt tensioners from a 1946 monarch 10ee
|
|
|
Really nice Monarch 10ee, South Bend 13" lathe steady rest
You are bidding on a really nice steady rest that I thought was for a Monarch 10EE lathe. It has come to my attention that this may be a South Bend steady rest. It is similar in size to the 10EE steady rest that I had. So I would think it would fit a 13" South Bend. As you can see in the pictures, it is in excellent condition. See my other items for more 10EE tooling including the extremely rare follow rest. I am always happy to combine shipping. This is a no reserve auction.
|
|
|
monarch 10EE lathe end gears
End gears from a 1946 monarch 10ee
|
|
|
monarch 10EE lathe motor,gearbox and linkage
Monarch 10ee motor and gearbox. Came from a lathe that I was told ran but is untested. As this will need to be wired and I have no guarantee it's by someone qualified to do so it's as is with no returns. Pick up only and cash on pick up. Please do not check out through paypal.
|
|
|
monarch 10EE lathe selector and micrometer stop
Selector and micrometer stop. A repair has been done to the bed clamp portion. Shipping quoted is from me in nh to ca.If your closer it will be cheaper. Either wait to be invoiced or I'll refund unused shipping if you pay prior to being invoiced
|
|
|
monarch 10EE lathe headstock end cover
End cover from a 1946 monarch 10ee. Spindle opening has been modified.Enlarged for collet closer possibly. Shipping quoted is from me in nh to ca. If your closer it will be less
|
|
|
monarch 10EE lathe lever collet closer part
This came from a 1946 monarch 10ee and I believe it's a part for the lever closer. It has some damage and will need to be cleaned up and repaired.i did my best to show all the damage so please look at the pics before bidding.
|
|
|
Monarch 10EE lathe indexing attachment
Indexing unit from a 1946 monarch 10ee. I believe this was an option and many lathes don't have them. I could not get the index ring off but one could easily be made
|
|
|
Monarch Lathe 10EE DATE BUILD 07/1942 MFGR'S NO 14332
This is an auction for Monarch Lathe 10EE DATE BUILD 07/1942 MFGR'S NO 14332. I was told that the unit was replaced with the same one. But in the better shape. I was also told that this unit was working until now, but I don't know how to check it. This is why I sell this lathe without the return. It comes as seen in the pictures. If you like to inspect the unit, welcome. Unit is for local pickup only. But if buyer would like to ship unit, I can put it on pallet and have it ready for a freight company to pick it up. Buyer will be responsible for all of the shipping charges, must have a shipping insurance. No warranty. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Monarch 10EE Lathe Clamshell Indicator Holder & Indicator
About Us Return Policy Shipping Payment swtools Shop Tools for Machinist. Wood Worker and Porsche Mechanic. Monarch 10EE Lathe Clamshell Indicator Holder& Indicator Monarch 10EE Lathe Clamshell Indicator Holder and Monarch Federal B70 dial indicator. Fits the dovetail bracket on the carriage. Very good condition. The plexiglass lens in the clamshell needs replacing. But that is an easy fix. About Us Former Porsche Dealer and independent Mechanic. Specialist in 356 restoration. Tool collector and member of PAST. Wood worker and Metal Worker. Selling Porsche parts, Collectible Tools, German, Quality American and Swiss Tools, Shop Tools and Supplies including Deckel, Schaublin and Monarch machines and accessories. Other Vintage Porsche Parts Machinists Hand Tools Euphoniums. Tubas and Brass Metrology& Machine Rebuilding Monarch Parts ... moreand Accessories Deckel Parts and Accessories Delta-Rockwell Parts Mill and Lathe Tooling Electronics Everything Else Mechanics Hand Tools Screwdrivers Woodworking Tools Auto Parts Technical Books& Catalogs Sanding& Grinding Machinery Payment We accept Paypal. Contact us if you wish to use another means of payment. Shipping Careful packing comes free with every auction. We pack as economically as possible. And use USPS flat rate boxes if the item will fit. Heavy items are pre-wrapped in cardboard, with additional packing around sharp corners. Nothing is left to chance. No handling charge is added for our auctions, the shipping cost is always the cost charged by Ebay. Machinery and very large or heavy items that are shipped freight will have an additional crating charge that is specified in the auction description. Return Policy Returns accepted within 14 days. Buyer pays return shipping. gsrx_vers_603(GS 6.9(603)
|
|
|
#10EE MONARCH 10"(12.5") X 20"cc Engine Lathe (New 1976, Retrofitted 2014)
Model: 10EE MONARCH 10"12.5" X 20" Precision Toolmaker's Lathe with New Solid State DC Motor Controller. S/N: 51722(New 1976. Retrofitted 2014) Specifications: Swing over bed Swing over cross slide Distance between centers Hole through spindle Headstock center taper Spindle nose. Camlock, type Infinitely variable spindle speeds. Two ranges high low Tailstock spindle diameter Tailstock spindle travel Tailstock spindle taper Threads. Inch(60) metric(48 pitches- loose change) 50) Feeds. Longitudinal 12-1/2" 7-1/4" 20" 1-13/32" 2 Morse D-1-3" 400-3.500 R.P.M. 8-800 R.P.M. 1-1/4" 3-1/2" 2 Morse 3-184 T.P.I. 225-4 mm.0005-016 I.P.R. Equipped With: Inch& metric threading capability Flame hardened bed ways Taper turning attachment#LH10 SONY two-axis digital readout 11" Diameter faceplate ... more8" Diameter CUSHMAN four-jaw chuck with removable and reversible jaws 8" Diameter CUSHMAN three-jaw chuck with removable and reversible top jaws 3" Diameter capacity three-point plain-type steady rest JACOBS collet chuck and rubber flex collets Screw-type drawbar for type 5C collets with nose piece Metal storage cabinet with approximately(90) type 5C collets HARDINGE quick-change toolpost with(9) tool holders Follow rest Threading dial Adjustable carriage stop Tailstock with(1) plain center. 1) 0-1/2" and(1) 0-1/4" capacity JACOBS key-type drill chucks Self-contained coolant pump and tank BRAND NEW#D510-FWCH Beel Industrial Controls Ltd. Solid State DC motor Speed Controller(Installed December of 2014) 3 H.P. DC spindle drive motor Machine is wired for 220 volt AC electrical input only. Approximate Weight: 3.450 Lbs. Approximate Dimensions: 68" L-R x 42" F-B x 70" H Location: F.O.B. Truck. Hauppauge- Long Island, NY- We Ship Worldwide Reference# LAT_GM3041 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b0ecec509-0x115-
|
|
|
Monarch 10EE Lathe Followrest Follow Rest Excellent Gunsmith Toolroom lathe
This is a rare find Follow Rest for a Monarch 10ee Lathe. It looks like it has seen little use. See my other items for more lathe tooling and parts. I am always happy to combine shipping. No reserve
|
|
|
Original Monarch Lathe Tooling Cabinet 10EE Series 60 61 EE
Very hard to find piece for you Monarch lathe-original. Factory tooling cabinet. Please see pictures, missing some pieces and needs some work, among other things- Missing collet storage components. Missing cover for front of collet compartment. This is just basically a piece of flat sheet with a couple bends on it-I can provide a sketch for the buyer if requested) Missing handles on collet compartent and bottom door. Piece under the pull-out drawer needs rewelded(Two spot welds) Dent on bottom front corner. Sold"As Is" Please check out the pictures closely. Local Pickup only. Thanks for looking!
|
|
|
Monarch 10EE Lathe Drive Plate (CTAM# 7092)
Monarch 10EE Lathe Drive Plate Very clean condition- appears to have had little use.
|
|
|
MONARCH 10EE TOOLROOM LATHE STEADY REST - 10" SWING
Made in the USA by Monarch. This is a Monarch 10EE Toolroom Lathe Steady Rest. Paint has scratches and normal wear in some areas. But overall the steady rest in good condition. SPECIFICATIONS: Lathe Swing: 10" Maximum Capacity: 2-1/2" Center of"V" to End of Flat: 6-1/2" Overall Dimensions: 9-3/4" x 3" x 13" high Comes exactly as shown in pictures. LOCAL PICKUP AVAILABLE! If you have any questions please contact Mike@ 323-202-3955 or Nick@ 323-837-8598. Thank you.
|
|
 |